2017-10-26T19:44:10.041Z,1509047050.041 [Supervisor](DEBUG): Initializing supervisor.
2017-10-26T19:44:10.044Z,1509047050.044 [SyncHandler](DEBUG): Created PCaller Thread at 4051A4E0
2017-10-26T19:44:10.044Z,1509047050.044 [SyncHandler](INFO): Protected caller Thread ID is 2214
2017-10-26T19:44:10.045Z,1509047050.045 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2017-10-26T19:44:10.046Z,1509047050.046 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 4054A4E0
2017-10-26T19:44:10.046Z,1509047050.046 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 2215
2017-10-26T19:44:10.049Z,1509047050.049 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2017-10-26T19:44:10.061Z,1509047050.061 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2017-10-26T19:44:10.062Z,1509047050.062 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 4057A4E0
2017-10-26T19:44:10.062Z,1509047050.062 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 2216
2017-10-26T19:44:10.063Z,1509047050.063 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2017-10-26T19:44:10.064Z,1509047050.064 [logger ThreadHandler](DEBUG): Created PCaller Thread at 405AA4E0
2017-10-26T19:44:10.064Z,1509047050.064 [logger ThreadHandler](INFO): Protected caller Thread ID is 2217
2017-10-26T19:44:10.066Z,1509047050.066 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2017-10-26T19:44:10.067Z,1509047050.067 [Supervisor](INFO): Looking for Config files in directory: Config/
2017-10-26T19:44:10.068Z,1509047050.068 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2017-10-26T19:44:10.261Z,1509047050.261 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2017-10-26T19:44:10.262Z,1509047050.262 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2017-10-26T19:44:10.400Z,1509047050.400 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2017-10-26T19:44:10.401Z,1509047050.401 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2017-10-26T19:44:10.747Z,1509047050.747 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2017-10-26T19:44:10.747Z,1509047050.747 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2017-10-26T19:44:10.891Z,1509047050.891 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2017-10-26T19:44:10.891Z,1509047050.891 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2017-10-26T19:44:10.979Z,1509047050.979 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2017-10-26T19:44:11.184Z,1509047051.184 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2017-10-26T19:44:11.184Z,1509047051.184 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2017-10-26T19:44:11.290Z,1509047051.290 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2017-10-26T19:44:11.290Z,1509047051.290 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2017-10-26T19:44:11.593Z,1509047051.593 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2017-10-26T19:44:11.594Z,1509047051.594 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2017-10-26T19:44:11.956Z,1509047051.956 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2017-10-26T19:44:11.957Z,1509047051.957 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2017-10-26T19:44:12.269Z,1509047052.269 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2017-10-26T19:44:12.270Z,1509047052.270 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2017-10-26T19:44:12.812Z,1509047052.812 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2017-10-26T19:44:12.813Z,1509047052.813 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2017-10-26T19:44:13.021Z,1509047053.021 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2017-10-26T19:44:13.021Z,1509047053.021 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2017-10-26T19:44:13.126Z,1509047053.126 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2017-10-26T19:44:13.127Z,1509047053.127 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2017-10-26T19:44:13.617Z,1509047053.617 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2017-10-26T19:44:13.617Z,1509047053.617 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2017-10-26T19:44:13.731Z,1509047053.731 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2017-10-26T19:44:13.733Z,1509047053.733 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-opah/
2017-10-26T19:44:13.734Z,1509047053.734 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Battery.cfg
2017-10-26T19:44:13.971Z,1509047053.971 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2017-10-26T19:44:13.972Z,1509047053.972 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/BIT.cfg
2017-10-26T19:44:14.134Z,1509047054.134 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Navigation.cfg
2017-10-26T19:44:14.247Z,1509047054.247 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Control.cfg
2017-10-26T19:44:14.351Z,1509047054.351 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Simulator.cfg
2017-10-26T19:44:14.444Z,1509047054.444 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Science.cfg
2017-10-26T19:44:14.599Z,1509047054.599 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Sensor.cfg
2017-10-26T19:44:14.772Z,1509047054.772 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/Servo.cfg
2017-10-26T19:44:14.885Z,1509047054.885 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/logger.cfg
2017-10-26T19:44:14.989Z,1509047054.989 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/secure.cfg
2017-10-26T19:44:15.099Z,1509047055.099 [Supervisor](INFO): Opening Config file at: Config/lrauv-opah/vehicle.cfg
2017-10-26T19:44:15.274Z,1509047055.274 [Supervisor](IMPORTANT): Reading configuration overrides from Data/persisted.cfg
2017-10-26T19:44:15.285Z,1509047055.285 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2017-10-26T19:44:15.411Z,1509047055.411 [SBIT](DEBUG): Construct Startup Built In Test.
2017-10-26T19:44:15.441Z,1509047055.441 [SBIT] Loaded
2017-10-26T19:44:15.441Z,1509047055.441 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2017-10-26T19:44:15.442Z,1509047055.442 [IBIT](DEBUG): Construct Initiated Built In Test.
2017-10-26T19:44:15.470Z,1509047055.470 [IBIT] Loaded
2017-10-26T19:44:15.470Z,1509047055.470 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2017-10-26T19:44:15.474Z,1509047055.474 [CBIT](DEBUG): Construct Continuous Built In Test.
2017-10-26T19:44:15.624Z,1509047055.624 [CBIT] Loaded
2017-10-26T19:44:15.624Z,1509047055.624 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2017-10-26T19:44:15.625Z,1509047055.625 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2017-10-26T19:44:15.625Z,1509047055.625 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2017-10-26T19:44:15.692Z,1509047055.692 [VerticalControl](DEBUG): Construct VerticalControl.
2017-10-26T19:44:15.790Z,1509047055.790 [VerticalControl] Loaded
2017-10-26T19:44:15.791Z,1509047055.791 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2017-10-26T19:44:15.791Z,1509047055.791 [HorizontalControl](DEBUG): Construct HorizontalControl.
2017-10-26T19:44:15.867Z,1509047055.867 [HorizontalControl] Loaded
2017-10-26T19:44:15.868Z,1509047055.868 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2017-10-26T19:44:15.868Z,1509047055.868 [SpeedControl](DEBUG): Construct SpeedControl.
2017-10-26T19:44:15.887Z,1509047055.887 [SpeedControl] Loaded
2017-10-26T19:44:15.888Z,1509047055.888 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2017-10-26T19:44:15.888Z,1509047055.888 [LoopControl](DEBUG): Construct LoopControl.
2017-10-26T19:44:15.889Z,1509047055.889 [LoopControl] Loaded
2017-10-26T19:44:15.889Z,1509047055.889 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2017-10-26T19:44:15.890Z,1509047055.890 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2017-10-26T19:44:15.890Z,1509047055.890 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2017-10-26T19:44:15.915Z,1509047055.915 [DepthRateCalculator] Loaded
2017-10-26T19:44:15.915Z,1509047055.915 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2017-10-26T19:44:15.920Z,1509047055.920 [PitchRateCalculator] Loaded
2017-10-26T19:44:15.921Z,1509047055.921 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2017-10-26T19:44:15.939Z,1509047055.939 [SpeedCalculator] Loaded
2017-10-26T19:44:15.939Z,1509047055.939 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2017-10-26T19:44:15.975Z,1509047055.975 [TempGradientCalculator] Loaded
2017-10-26T19:44:15.976Z,1509047055.976 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2017-10-26T19:44:15.991Z,1509047055.991 [VerticalTemperatureHomogeneityIndexCalculator] Loaded
2017-10-26T19:44:15.991Z,1509047055.991 [ComponentRegistry](DEBUG): SyncComponent "VerticalTemperatureHomogeneityIndexCalculator" handled in the control thread.
2017-10-26T19:44:15.997Z,1509047055.997 [YawRateCalculator] Loaded
2017-10-26T19:44:15.997Z,1509047055.997 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2017-10-26T19:44:15.997Z,1509047055.997 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2017-10-26T19:44:15.998Z,1509047055.998 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2017-10-26T19:44:16.080Z,1509047056.080 [StratificationFrontDetector](INFO): threshold set to: 0.399988 degC
2017-10-26T19:44:16.080Z,1509047056.080 [StratificationFrontDetector](DEBUG): (re)initializing
2017-10-26T19:44:16.081Z,1509047056.081 [StratificationFrontDetector] Loaded
2017-10-26T19:44:16.081Z,1509047056.081 [ComponentRegistry](DEBUG): SyncComponent "StratificationFrontDetector" handled in the control thread.
2017-10-26T19:44:16.081Z,1509047056.081 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2017-10-26T19:44:16.082Z,1509047056.082 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2017-10-26T19:44:16.316Z,1509047056.316 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2017-10-26T19:44:16.316Z,1509047056.316 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2017-10-26T19:44:16.412Z,1509047056.412 [DeadReckonUsingMultipleVelocitySources] Loaded
2017-10-26T19:44:16.413Z,1509047056.413 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2017-10-26T19:44:16.468Z,1509047056.468 [DeadReckonUsingSpeedCalculator] Loaded
2017-10-26T19:44:16.469Z,1509047056.469 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2017-10-26T19:44:16.524Z,1509047056.524 [DeadReckonWithRespectToSeafloor] Loaded
2017-10-26T19:44:16.524Z,1509047056.524 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2017-10-26T19:44:16.540Z,1509047056.540 [NavChart] Loaded
2017-10-26T19:44:16.540Z,1509047056.540 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2017-10-26T19:44:16.545Z,1509047056.545 [UniversalFixResidualReporter] Loaded
2017-10-26T19:44:16.545Z,1509047056.545 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2017-10-26T19:44:16.545Z,1509047056.545 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2017-10-26T19:44:16.546Z,1509047056.546 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2017-10-26T19:44:16.559Z,1509047056.559 [Module Loader](CRITICAL): Could not find element LcmListener.loadAtStartup
2017-10-26T19:44:16.559Z,1509047056.559 [Module Loader](CRITICAL): Could not find element LcmPublisher.loadAtStartup
2017-10-26T19:44:16.560Z,1509047056.560 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2017-10-26T19:44:16.560Z,1509047056.560 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2017-10-26T19:44:16.701Z,1509047056.701 [Aanderaa_O2] Loaded
2017-10-26T19:44:16.701Z,1509047056.701 [ComponentRegistry](DEBUG): SyncComponent "Aanderaa_O2" handled in the control thread.
2017-10-26T19:44:16.737Z,1509047056.737 [CTD_Seabird] Loaded
2017-10-26T19:44:16.737Z,1509047056.737 [ComponentRegistry](DEBUG): Component "CTD_Seabird" handled in its own thread.
2017-10-26T19:44:16.738Z,1509047056.738 [CTD_Seabird ThreadHandler](DEBUG): Created PCaller Thread at 4078C4E0
2017-10-26T19:44:16.739Z,1509047056.739 [CTD_Seabird ThreadHandler](INFO): Protected caller Thread ID is 2296
2017-10-26T19:44:16.756Z,1509047056.756 [ESPComponent] Loaded
2017-10-26T19:44:16.756Z,1509047056.756 [ComponentRegistry](DEBUG): SyncComponent "ESPComponent" handled in the control thread.
2017-10-26T19:44:16.770Z,1509047056.770 [PAR_Licor] Loaded
2017-10-26T19:44:16.771Z,1509047056.771 [ComponentRegistry](DEBUG): SyncComponent "PAR_Licor" handled in the control thread.
2017-10-26T19:44:16.820Z,1509047056.820 [WetLabsBB2FL] Loaded
2017-10-26T19:44:16.820Z,1509047056.820 [ComponentRegistry](DEBUG): Component "WetLabsBB2FL" handled in its own thread.
2017-10-26T19:44:16.821Z,1509047056.821 [WetLabsBB2FL ThreadHandler](DEBUG): Created PCaller Thread at 407BC4E0
2017-10-26T19:44:16.822Z,1509047056.822 [WetLabsBB2FL ThreadHandler](INFO): Protected caller Thread ID is 2297
2017-10-26T19:44:16.822Z,1509047056.822 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2017-10-26T19:44:16.823Z,1509047056.823 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2017-10-26T19:44:17.081Z,1509047057.081 [DataOverHttps] Loaded
2017-10-26T19:44:17.082Z,1509047057.082 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2017-10-26T19:44:17.095Z,1509047057.095 [Depth_Keller] Loaded
2017-10-26T19:44:17.095Z,1509047057.095 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2017-10-26T19:44:17.100Z,1509047057.100 [DropWeight] Loaded
2017-10-26T19:44:17.101Z,1509047057.101 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2017-10-26T19:44:17.193Z,1509047057.193 [NAL9602] Loaded
2017-10-26T19:44:17.193Z,1509047057.193 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2017-10-26T19:44:17.202Z,1509047057.202 [Onboard] Loaded
2017-10-26T19:44:17.203Z,1509047057.203 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2017-10-26T19:44:17.210Z,1509047057.210 [Radio_Surface] Loaded
2017-10-26T19:44:17.210Z,1509047057.210 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2017-10-26T19:44:17.211Z,1509047057.211 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 40A004E0
2017-10-26T19:44:17.212Z,1509047057.212 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 2298
2017-10-26T19:44:17.218Z,1509047057.218 [SCPI] Loaded
2017-10-26T19:44:17.218Z,1509047057.218 [ComponentRegistry](DEBUG): SyncComponent "SCPI" handled in the control thread.
2017-10-26T19:44:17.267Z,1509047057.267 [PNI_TCM] Loaded
2017-10-26T19:44:17.267Z,1509047057.267 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2017-10-26T19:44:17.328Z,1509047057.328 [Rowe_600LCM] Loaded
2017-10-26T19:44:17.328Z,1509047057.328 [ComponentRegistry](DEBUG): Component "Rowe_600LCM" handled in its own thread.
2017-10-26T19:44:17.329Z,1509047057.329 [Rowe_600LCM ThreadHandler](DEBUG): Created PCaller Thread at 40A304E0
2017-10-26T19:44:17.330Z,1509047057.330 [Rowe_600LCM ThreadHandler](INFO): Protected caller Thread ID is 2299
2017-10-26T19:44:19.162Z,1509047059.162 [BPC1] Loaded
2017-10-26T19:44:19.162Z,1509047059.162 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2017-10-26T19:44:19.163Z,1509047059.163 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2017-10-26T19:44:19.163Z,1509047059.163 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2017-10-26T19:44:19.260Z,1509047059.260 [BuoyancyServo] Loaded
2017-10-26T19:44:19.260Z,1509047059.260 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2017-10-26T19:44:19.273Z,1509047059.273 [ElevatorServo] Loaded
2017-10-26T19:44:19.273Z,1509047059.273 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2017-10-26T19:44:19.285Z,1509047059.285 [MassServo] Loaded
2017-10-26T19:44:19.285Z,1509047059.285 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2017-10-26T19:44:19.296Z,1509047059.296 [RudderServo] Loaded
2017-10-26T19:44:19.297Z,1509047059.297 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2017-10-26T19:44:19.308Z,1509047059.308 [ThrusterServo] Loaded
2017-10-26T19:44:19.308Z,1509047059.308 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2017-10-26T19:44:19.321Z,1509047059.321 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2017-10-26T19:44:19.321Z,1509047059.321 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2017-10-26T19:44:19.418Z,1509047059.418 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2017-10-26T19:44:19.419Z,1509047059.419 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2017-10-26T19:44:19.444Z,1509047059.444 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2017-10-26T19:44:19.448Z,1509047059.448 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2017-10-26T19:44:19.449Z,1509047059.449 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2017-10-26T19:44:19.456Z,1509047059.456 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2017-10-26T19:44:19.457Z,1509047059.457 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 40ADE4E0
2017-10-26T19:44:19.457Z,1509047059.457 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 2300
2017-10-26T19:44:19.462Z,1509047059.462 [Supervisor](INFO): Main Thread ID is 766
2017-10-26T19:44:19.462Z,1509047059.462 [Supervisor](DEBUG): Running supervisor.
2017-10-26T19:44:19.463Z,1509047059.463 [CommandLine ThreadHandler](INFO): Handler Thread ID is 2301
2017-10-26T19:44:19.466Z,1509047059.466 [controlThread ThreadHandler](INFO): Handler Thread ID is 2302
2017-10-26T19:44:19.466Z,1509047059.466 [controlThread](DEBUG): Initializing ControlThread
2017-10-26T19:44:19.467Z,1509047059.467 [SBIT](INFO): Initialize SBIT Component.
2017-10-26T19:44:19.468Z,1509047059.468 [SBIT](IMPORTANT): git: 2017-10-16-79-ga858579
2017-10-26T19:44:19.468Z,1509047059.468 [SBIT](INFO): git hash: a8585799d0abb9d626597d5adc3105b388fe8787
2017-10-26T19:44:19.470Z,1509047059.470 [SBIT](INFO): Kernel Reporting Different Release From Configuration.
Kernel Expected: 2.6.27.8
Kernel Reported: 2.6.27.8-00011-g2bc81df-dirty
2017-10-26T19:44:19.470Z,1509047059.470 [SBIT](INFO): Kernel Reporting Different Version From Configuration.
Kernel Expected: #639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
Kernel Reported: #646 PREEMPT Thu Feb 11 17:01:12 PST 2016
2017-10-26T19:44:19.471Z,1509047059.471 [SBIT](INFO): Beginning SBIT in 39.000000 seconds.
2017-10-26T19:44:19.472Z,1509047059.472 [IBIT](INFO): Initialize IBIT Component.
2017-10-26T19:44:19.472Z,1509047059.472 [CBIT](DEBUG): Initialize CBIT Component.
2017-10-26T19:44:19.473Z,1509047059.473 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2017-10-26T19:44:19.474Z,1509047059.474 [logger ThreadHandler](INFO): Handler Thread ID is 2303
2017-10-26T19:44:19.502Z,1509047059.502 [CTD_Seabird ThreadHandler](INFO): Handler Thread ID is 2304
2017-10-26T19:44:19.503Z,1509047059.503 [CTD_Seabird](INFO): Initializing
2017-10-26T19:44:19.543Z,1509047059.543 [WetLabsBB2FL ThreadHandler](INFO): Handler Thread ID is 2306
2017-10-26T19:44:19.545Z,1509047059.545 [WetLabsBB2FL](INFO): Powering down
2017-10-26T19:44:19.554Z,1509047059.554 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2017-10-26T19:44:19.557Z,1509047059.557 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2017-10-26T19:44:19.558Z,1509047059.558 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2017-10-26T19:44:19.558Z,1509047059.558 [LoopControl](DEBUG): Initialize LoopControlComponent.
2017-10-26T19:44:19.559Z,1509047059.559 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2017-10-26T19:44:19.559Z,1509047059.559 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2017-10-26T19:44:19.560Z,1509047059.560 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2017-10-26T19:44:19.560Z,1509047059.560 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2017-10-26T19:44:19.561Z,1509047059.561 [VerticalTemperatureHomogeneityIndexCalculator](DEBUG): (re)initializing
2017-10-26T19:44:19.562Z,1509047059.562 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2017-10-26T19:44:19.567Z,1509047059.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T19:44:19.568Z,1509047059.568 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T19:44:19.568Z,1509047059.568 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T19:44:19.568Z,1509047059.568 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-10-26T19:44:19.569Z,1509047059.569 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T19:44:19.569Z,1509047059.569 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T19:44:19.574Z,1509047059.574 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T19:44:19.574Z,1509047059.574 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T19:44:19.575Z,1509047059.575 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T19:44:19.575Z,1509047059.575 [NavChart](DEBUG): Initialize NavChart Navigation.
2017-10-26T19:44:19.576Z,1509047059.576 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2017-10-26T19:44:19.595Z,1509047059.595 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 2307
2017-10-26T19:44:19.606Z,1509047059.606 [Radio_Surface](INFO): Powering up
2017-10-26T19:44:19.616Z,1509047059.616 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2017-10-26T19:44:19.623Z,1509047059.623 [Rowe_600LCM ThreadHandler](INFO): Handler Thread ID is 2308
2017-10-26T19:44:19.623Z,1509047059.623 [Rowe_600LCM](INFO): Initializing
2017-10-26T19:44:19.624Z,1509047059.624 [Rowe_600LCM](INFO): Checking LCM
2017-10-26T19:44:19.632Z,1509047059.632 [Rowe_600LCM](INFO): LCM OK
2017-10-26T19:44:19.633Z,1509047059.633 [Rowe_600LCM](INFO): Powering up
2017-10-26T19:44:19.651Z,1509047059.651 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 2309
2017-10-26T19:44:19.654Z,1509047059.654 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US1WC07M.000
2017-10-26T19:44:19.655Z,1509047059.655 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2017-10-26T19:44:19.655Z,1509047059.655 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US2WC11M.000
2017-10-26T19:44:19.655Z,1509047059.655 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2017-10-26T19:44:19.655Z,1509047059.655 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US3CA52M.000
2017-10-26T19:44:19.655Z,1509047059.655 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2017-10-26T19:44:19.656Z,1509047059.656 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US4CA60M.000
2017-10-26T19:44:19.656Z,1509047059.656 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2017-10-26T19:44:19.656Z,1509047059.656 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA50M.000
2017-10-26T19:44:19.656Z,1509047059.656 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2017-10-26T19:44:19.656Z,1509047059.656 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA61M.000
2017-10-26T19:44:19.656Z,1509047059.656 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2017-10-26T19:44:19.657Z,1509047059.657 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA62M.000
2017-10-26T19:44:19.657Z,1509047059.657 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2017-10-26T19:44:19.657Z,1509047059.657 [NavChartDb](INFO): Looking for Electronic Nav Chart file at: Resources/ElectronicNavigationCharts/US5CA83M.000
2017-10-26T19:44:19.657Z,1509047059.657 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2017-10-26T19:44:19.683Z,1509047059.683 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2017-10-26T19:44:19.705Z,1509047059.705 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2017-10-26T19:44:19.739Z,1509047059.739 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2017-10-26T19:44:19.801Z,1509047059.801 [MissionManager](INFO): DefineArg Default.ElapsedSinceDefaultStarted = 0.000000 min
2017-10-26T19:44:19.802Z,1509047059.802 [Default:A.Wait](DEBUG): Construct Wait.
2017-10-26T19:44:19.828Z,1509047059.828 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2017-10-26T19:44:19.853Z,1509047059.853 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-10-26T19:44:19.853Z,1509047059.853 [CTD_Seabird](INFO): Powering down
2017-10-26T19:44:19.882Z,1509047059.882 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2017-10-26T19:44:19.884Z,1509047059.884 [Default:CheckIn:C.Wait](DEBUG): Construct Wait.
2017-10-26T19:44:19.922Z,1509047059.922 [Default:E.Execute](DEBUG): Construct Execute.
2017-10-26T19:44:19.925Z,1509047059.925 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Guidance="Tethys/Guidance"
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="ElapsedSinceDefaultStarted"><Units:minute/><Value>0</Value></DefineArg>

    <Guidance:Wait>
        <Sequence/>
        <Description>
            Wait a moment to see if the scheduler starts a new mission before
            starting to actually run Default.
        </Description>
        <Setting><Guidance:Wait.duration/><Units:second/><Value>13</Value></Setting>
    </Guidance:Wait>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <Sequence Repeat="288"/>

        <ReadDatum Id="Read_GPS">
            <Sequence/>
            <Timeout Duration="P5M"/>
            <Universal:time_fix/>
        </ReadDatum>

        <ReadDatum Id="Read_Iridium">
            <Sequence/>
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped weight due to communications timeout.</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Units:minute/><Value>5</Value></Setting>
        </Guidance:Wait>

        <Assign><Sequence/><Arg Name="ElapsedSinceDefaultStarted"/><Elapsed><Universal:mission_started/></Elapsed></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceDefaultStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Syslog Severity="Important">Restarting logs and Default mission.</Syslog>

    <Guidance:Execute>
        <Sequence/>
        <Setting><Guidance:Execute.command/><String>restart logs</String></Setting>
    </Guidance:Execute>

</Mission>


2017-10-26T19:44:19.939Z,1509047059.939 [controlThread](DEBUG): Component order: CycleStarter,Aanderaa_O2,ESPComponent,PAR_Licor,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,SCPI,PNI_TCM,BPC1,PAR_Licor,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,VerticalTemperatureHomogeneityIndexCalculator,YawRateCalculator,StratificationFrontDetector,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToSeafloor,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2017-10-26T19:44:20.047Z,1509047060.047 [DataOverHttps](DEBUG): dashIP=134.89.2.23 starts with a digit so assuming it is a numeric IP
2017-10-26T19:44:20.397Z,1509047060.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:20.397Z,1509047060.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-10-26T19:44:20.400Z,1509047060.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:20.426Z,1509047060.426 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:20.460Z,1509047060.460 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:20.574Z,1509047060.574 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-10-26T19:44:20.580Z,1509047060.580 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-10-26T19:44:20.602Z,1509047060.602 [ElevatorServo](DEBUG): Initializing EZServoServo.
2017-10-26T19:44:20.608Z,1509047060.608 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2017-10-26T19:44:20.622Z,1509047060.622 [MassServo](DEBUG): Initializing EZServoServo.
2017-10-26T19:44:20.628Z,1509047060.628 [MassServo](DEBUG): Initializing MassServo.
2017-10-26T19:44:20.653Z,1509047060.653 [RudderServo](DEBUG): Initializing EZServoServo.
2017-10-26T19:44:20.660Z,1509047060.660 [RudderServo](DEBUG): Initializing RudderServo.
2017-10-26T19:44:20.673Z,1509047060.673 [ThrusterServo](DEBUG): Initializing EZServoServo.
2017-10-26T19:44:20.680Z,1509047060.680 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2017-10-26T19:44:20.713Z,1509047060.713 [CommandLine](FAULT): Scheduling is paused
2017-10-26T19:44:20.713Z,1509047060.713 [CBIT](INFO): Critical error at 20171026T194416
2017-10-26T19:44:20.714Z,1509047060.714 [Supervisor](INFO): Stop Mission called by CBIT::checkCriticals
2017-10-26T19:44:21.101Z,1509047061.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:21.102Z,1509047061.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-10-26T19:44:21.103Z,1509047061.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:21.103Z,1509047061.103 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:21.104Z,1509047061.104 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:21.429Z,1509047061.429 [BuoyancyServo](ERROR): Buoyancy initialization uart error serial timeout
2017-10-26T19:44:21.429Z,1509047061.429 [BuoyancyServo](FAULT): Buoyancy failed to initialize
2017-10-26T19:44:21.429Z,1509047061.429 [BuoyancyServo] Communications Fault, FailCount= 1
2017-10-26T19:44:21.429Z,1509047061.429 [BuoyancyServo](ERROR): Communications Fault
2017-10-26T19:44:21.637Z,1509047061.637 [CBIT](ERROR): Communications Fault in component: BuoyancyServo
2017-10-26T19:44:21.713Z,1509047061.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:21.713Z,1509047061.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-10-26T19:44:21.714Z,1509047061.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:21.722Z,1509047061.722 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:21.722Z,1509047061.722 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:21.736Z,1509047061.736 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2017-10-26T19:44:21.738Z,1509047061.738 [BuoyancyServo](INFO): Powering down
2017-10-26T19:44:22.115Z,1509047062.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:22.116Z,1509047062.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-10-26T19:44:22.139Z,1509047062.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:22.140Z,1509047062.140 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:22.140Z,1509047062.140 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:22.522Z,1509047062.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:22.522Z,1509047062.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-10-26T19:44:22.523Z,1509047062.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:22.524Z,1509047062.524 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:22.525Z,1509047062.525 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:22.907Z,1509047062.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:22.907Z,1509047062.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-10-26T19:44:22.908Z,1509047062.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:22.909Z,1509047062.909 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:22.910Z,1509047062.910 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:23.364Z,1509047063.364 [Aanderaa_O2](INFO): Powering down
2017-10-26T19:44:23.495Z,1509047063.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:23.495Z,1509047063.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-10-26T19:44:23.497Z,1509047063.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:23.497Z,1509047063.497 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:23.498Z,1509047063.498 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:23.747Z,1509047063.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:23.747Z,1509047063.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-10-26T19:44:23.748Z,1509047063.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:23.757Z,1509047063.757 [DeadReckonUsingSpeedCalculator](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:23.758Z,1509047063.758 [DeadReckonWithRespectToSeafloor](DEBUG): Starting up and don't have orientation data yet.
2017-10-26T19:44:23.910Z,1509047063.910 [CBIT](INFO): Clearing failed state for component BuoyancyServo
2017-10-26T19:44:23.910Z,1509047063.910 [BuoyancyServo] No Fault, FailCount= 1
2017-10-26T19:44:23.994Z,1509047063.994 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-10-26T19:44:24.132Z,1509047064.132 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-10-26T19:44:24.165Z,1509047064.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-10-26T19:44:24.167Z,1509047064.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:24.184Z,1509047064.184 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-10-26T19:44:24.201Z,1509047064.201 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-10-26T19:44:24.202Z,1509047064.202 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-10-26T19:44:24.209Z,1509047064.209 [BuoyancyServo](DEBUG): Initializing EZServoServo.
2017-10-26T19:44:24.226Z,1509047064.226 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2017-10-26T19:44:24.586Z,1509047064.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): All data for platform velocity is invalid.
2017-10-26T19:44:24.610Z,1509047064.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:24.950Z,1509047064.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:25.321Z,1509047065.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:25.707Z,1509047065.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:26.147Z,1509047066.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:26.500Z,1509047066.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:26.904Z,1509047066.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:27.345Z,1509047067.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:27.733Z,1509047067.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:28.126Z,1509047068.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:28.556Z,1509047068.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:28.896Z,1509047068.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:29.304Z,1509047069.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:29.766Z,1509047069.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:30.143Z,1509047070.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:30.529Z,1509047070.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:30.935Z,1509047070.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:31.548Z,1509047071.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:31.804Z,1509047071.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:32.175Z,1509047072.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:32.578Z,1509047072.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:33.014Z,1509047073.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:33.407Z,1509047073.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:33.803Z,1509047073.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:34.251Z,1509047074.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:34.585Z,1509047074.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:35.004Z,1509047075.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:35.373Z,1509047075.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:35.766Z,1509047075.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:36.201Z,1509047076.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:36.615Z,1509047076.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:36.991Z,1509047076.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:37.377Z,1509047077.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:37.799Z,1509047077.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:38.194Z,1509047078.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:38.566Z,1509047078.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:39.050Z,1509047079.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:39.375Z,1509047079.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:39.779Z,1509047079.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:40.196Z,1509047080.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:40.583Z,1509047080.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:40.962Z,1509047080.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:41.411Z,1509047081.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:41.786Z,1509047081.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:42.188Z,1509047082.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:42.604Z,1509047082.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:42.996Z,1509047082.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:43.383Z,1509047083.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:43.794Z,1509047083.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:44.172Z,1509047084.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:44.600Z,1509047084.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:44.987Z,1509047084.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:45.436Z,1509047085.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:45.769Z,1509047085.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:46.209Z,1509047086.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:46.679Z,1509047086.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:47.013Z,1509047087.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:47.323Z,1509047087.323 [NAL9602](INFO): Powering up NAL9602
2017-10-26T19:44:47.365Z,1509047087.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:47.795Z,1509047087.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:48.172Z,1509047088.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:48.658Z,1509047088.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:49.001Z,1509047089.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:49.378Z,1509047089.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:49.807Z,1509047089.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:50.212Z,1509047090.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:50.570Z,1509047090.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:50.984Z,1509047090.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:51.417Z,1509047091.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:51.791Z,1509047091.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:52.166Z,1509047092.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:52.609Z,1509047092.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:52.986Z,1509047092.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:53.396Z,1509047093.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:53.797Z,1509047093.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:54.217Z,1509047094.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:54.600Z,1509047094.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:54.996Z,1509047094.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:55.385Z,1509047095.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:55.780Z,1509047095.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:56.185Z,1509047096.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:56.574Z,1509047096.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:56.989Z,1509047096.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:57.422Z,1509047097.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:57.811Z,1509047097.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:58.132Z,1509047098.132 [NAL9602](INFO): NAL9602 initialized
2017-10-26T19:44:58.201Z,1509047098.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:58.630Z,1509047098.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:59.026Z,1509047099.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:59.048Z,1509047099.048 [SBIT](IMPORTANT): Beginning Startup BIT
2017-10-26T19:44:59.057Z,1509047099.057 [CBIT](IMPORTANT): Beginning ground fault scan
2017-10-26T19:44:59.424Z,1509047099.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:44:59.883Z,1509047099.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:00.199Z,1509047100.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:00.636Z,1509047100.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:00.994Z,1509047100.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:01.574Z,1509047101.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:01.935Z,1509047101.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:02.363Z,1509047102.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:02.735Z,1509047102.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:03.172Z,1509047103.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:03.533Z,1509047103.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:03.929Z,1509047103.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:04.307Z,1509047104.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:04.714Z,1509047104.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:05.141Z,1509047105.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:05.508Z,1509047105.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:05.921Z,1509047105.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:06.332Z,1509047106.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:06.717Z,1509047106.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:07.158Z,1509047107.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:07.511Z,1509047107.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:07.920Z,1509047107.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:08.328Z,1509047108.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:08.721Z,1509047108.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:09.117Z,1509047109.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:09.533Z,1509047109.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:09.925Z,1509047109.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:10.013Z,1509047110.013 [CBIT](IMPORTANT): Ground fault detected
mA:
CHAN A0 (Batt): 4.681929
CHAN A1 (24V): -0.101677
CHAN A2 (12V): -0.000583
CHAN A3 (5V): -0.022836
CHAN B0 (3.3V): -0.000931
CHAN B1 (3.15aV): -0.000114
CHAN B2 (3.15bV): -0.001023
CHAN B3 (GND): -0.001751
OPEN: 0.009756
Full Scale Calc: 4.765 mA, -1.589 mA
2017-10-26T19:45:10.317Z,1509047110.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:10.714Z,1509047110.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:11.118Z,1509047111.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:11.512Z,1509047111.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:11.947Z,1509047111.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:12.431Z,1509047112.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:12.734Z,1509047112.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:13.128Z,1509047113.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:13.533Z,1509047113.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:13.933Z,1509047113.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:14.312Z,1509047114.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:14.955Z,1509047114.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:15.388Z,1509047115.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:15.761Z,1509047115.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:16.145Z,1509047116.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:16.641Z,1509047116.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:16.962Z,1509047116.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:17.392Z,1509047117.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:17.789Z,1509047117.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:18.192Z,1509047118.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:18.571Z,1509047118.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:18.944Z,1509047118.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:19.401Z,1509047119.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:19.749Z,1509047119.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:20.199Z,1509047120.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:20.554Z,1509047120.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:20.957Z,1509047120.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:21.357Z,1509047121.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:21.763Z,1509047121.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:22.162Z,1509047122.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:22.553Z,1509047122.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:22.983Z,1509047122.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:23.408Z,1509047123.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:23.737Z,1509047123.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:24.152Z,1509047124.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:24.542Z,1509047124.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:24.946Z,1509047124.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:25.339Z,1509047125.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:25.746Z,1509047125.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:26.156Z,1509047126.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:26.545Z,1509047126.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:26.944Z,1509047126.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:27.349Z,1509047127.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:27.748Z,1509047127.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:28.146Z,1509047128.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:28.618Z,1509047128.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:28.952Z,1509047128.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:29.352Z,1509047129.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:29.778Z,1509047129.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:30.131Z,1509047130.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:30.639Z,1509047130.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:30.954Z,1509047130.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:31.368Z,1509047131.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:31.783Z,1509047131.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:32.164Z,1509047132.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:32.537Z,1509047132.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:32.936Z,1509047132.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:33.306Z,1509047133.306 [NAL9602](INFO): SBD MO Status=2, MOMSN=2551, MT Status=2, MTMSN=0
2017-10-26T19:45:33.307Z,1509047133.307 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-26T19:45:33.339Z,1509047133.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:33.741Z,1509047133.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:34.147Z,1509047134.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:34.537Z,1509047134.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:34.934Z,1509047134.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:35.342Z,1509047135.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:35.739Z,1509047135.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:36.146Z,1509047136.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:36.539Z,1509047136.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:36.949Z,1509047136.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:37.339Z,1509047137.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:37.754Z,1509047137.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:38.197Z,1509047138.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:38.559Z,1509047138.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:38.960Z,1509047138.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:39.343Z,1509047139.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:39.745Z,1509047139.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:40.150Z,1509047140.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:40.550Z,1509047140.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:40.963Z,1509047140.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:41.332Z,1509047141.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:41.902Z,1509047141.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:42.281Z,1509047142.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:42.720Z,1509047142.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:43.107Z,1509047143.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:43.535Z,1509047143.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:43.937Z,1509047143.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:44.287Z,1509047144.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:44.721Z,1509047144.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:45.084Z,1509047145.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:45.526Z,1509047145.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:45.935Z,1509047145.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:46.289Z,1509047146.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:46.686Z,1509047146.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:47.086Z,1509047147.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:47.493Z,1509047147.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:47.912Z,1509047147.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:48.319Z,1509047148.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:48.688Z,1509047148.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:49.086Z,1509047149.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:49.485Z,1509047149.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:49.886Z,1509047149.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:50.287Z,1509047150.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:50.688Z,1509047150.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:51.089Z,1509047151.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:51.517Z,1509047151.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:51.886Z,1509047151.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:52.291Z,1509047152.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:52.697Z,1509047152.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:53.088Z,1509047153.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:53.098Z,1509047153.098 [SBIT](IMPORTANT): SBIT PASSED
2017-10-26T19:45:53.492Z,1509047153.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:53.495Z,1509047153.495 [MissionManager](IMPORTANT): Started mission Startup
2017-10-26T19:45:53.495Z,1509047153.495 [Startup] Running Loop=1
2017-10-26T19:45:53.495Z,1509047153.495 [Startup](DEBUG): Aggregate::initialize Startup
2017-10-26T19:45:53.496Z,1509047153.496 [Startup:A.GoToSurface] Running Loop=1
2017-10-26T19:45:53.496Z,1509047153.496 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-10-26T19:45:53.496Z,1509047153.496 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-10-26T19:45:53.497Z,1509047153.497 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-10-26T19:45:53.497Z,1509047153.497 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-10-26T19:45:53.498Z,1509047153.498 [Startup:A.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-10-26T19:45:53.498Z,1509047153.498 [Startup:A.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-10-26T19:45:53.524Z,1509047153.524 [Startup:StartupSatComms] Running Loop=1
2017-10-26T19:45:53.524Z,1509047153.524 [Startup:StartupSatComms](DEBUG): Aggregate::initialize Startup:StartupSatComms
2017-10-26T19:45:53.525Z,1509047153.525 [Startup:StartupSatComms:A] Running Loop=1
2017-10-26T19:45:53.894Z,1509047153.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:53.898Z,1509047153.898 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2017-10-26T19:45:54.355Z,1509047154.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:54.693Z,1509047154.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:55.095Z,1509047155.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:55.490Z,1509047155.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:55.896Z,1509047155.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:56.292Z,1509047156.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:56.690Z,1509047156.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:57.095Z,1509047157.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:57.493Z,1509047157.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:57.961Z,1509047157.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:58.297Z,1509047158.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:58.699Z,1509047158.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:59.111Z,1509047159.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:59.495Z,1509047159.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:45:59.901Z,1509047159.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:00.313Z,1509047160.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:00.697Z,1509047160.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:01.090Z,1509047161.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:01.479Z,1509047161.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:01.909Z,1509047161.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:02.301Z,1509047162.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:02.704Z,1509047162.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:03.080Z,1509047163.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:03.482Z,1509047163.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:03.880Z,1509047163.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:04.287Z,1509047164.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:04.686Z,1509047164.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:05.082Z,1509047165.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:05.452Z,1509047165.452 [NAL9602](INFO): SBD MO Status=2, MOMSN=2551, MT Status=2, MTMSN=0
2017-10-26T19:46:05.452Z,1509047165.452 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-26T19:46:05.485Z,1509047165.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:05.914Z,1509047165.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:06.309Z,1509047166.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:06.711Z,1509047166.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:07.085Z,1509047167.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:07.488Z,1509047167.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:07.886Z,1509047167.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:08.373Z,1509047168.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:08.690Z,1509047168.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:09.091Z,1509047169.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:09.490Z,1509047169.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:09.908Z,1509047169.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:10.299Z,1509047170.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:10.689Z,1509047170.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:11.091Z,1509047171.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:11.491Z,1509047171.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:11.890Z,1509047171.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:12.293Z,1509047172.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:12.748Z,1509047172.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:13.100Z,1509047173.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:13.541Z,1509047173.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:13.902Z,1509047173.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:14.315Z,1509047174.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:14.694Z,1509047174.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:15.108Z,1509047175.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:15.499Z,1509047175.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:15.898Z,1509047175.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:16.288Z,1509047176.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:16.690Z,1509047176.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:17.093Z,1509047177.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:17.507Z,1509047177.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:17.894Z,1509047177.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:18.299Z,1509047178.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:18.695Z,1509047178.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:19.094Z,1509047179.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:19.493Z,1509047179.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:19.668Z,1509047179.668 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-10-26T19:46:19.668Z,1509047179.668 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-10-26T19:46:19.668Z,1509047179.668 [Rowe_600LCM](ERROR): Communications Fault
2017-10-26T19:46:19.899Z,1509047179.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-10-26T19:46:19.900Z,1509047179.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:19.915Z,1509047179.915 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-10-26T19:46:20.074Z,1509047180.074 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-10-26T19:46:20.303Z,1509047180.303 [Rowe_600LCM](INFO): Powering down
2017-10-26T19:46:20.310Z,1509047180.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-10-26T19:46:20.311Z,1509047180.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:20.696Z,1509047180.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-10-26T19:46:20.697Z,1509047180.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:21.099Z,1509047181.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-10-26T19:46:21.100Z,1509047181.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:21.507Z,1509047181.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-10-26T19:46:21.508Z,1509047181.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:21.523Z,1509047181.523 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-10-26T19:46:21.523Z,1509047181.523 [Rowe_600LCM] No Fault, FailCount= 1
2017-10-26T19:46:21.912Z,1509047181.912 [Rowe_600LCM](INFO): Initializing
2017-10-26T19:46:21.913Z,1509047181.913 [Rowe_600LCM](INFO): Checking LCM
2017-10-26T19:46:21.913Z,1509047181.913 [Rowe_600LCM](INFO): LCM OK
2017-10-26T19:46:21.913Z,1509047181.913 [Rowe_600LCM](INFO): Powering up
2017-10-26T19:46:21.929Z,1509047181.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-10-26T19:46:21.930Z,1509047181.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:22.293Z,1509047182.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-10-26T19:46:22.294Z,1509047182.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:22.690Z,1509047182.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-10-26T19:46:22.691Z,1509047182.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:23.087Z,1509047183.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-10-26T19:46:23.088Z,1509047183.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:23.494Z,1509047183.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-10-26T19:46:23.495Z,1509047183.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:23.892Z,1509047183.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-10-26T19:46:23.893Z,1509047183.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:24.289Z,1509047184.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-10-26T19:46:24.290Z,1509047184.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:24.697Z,1509047184.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-10-26T19:46:24.698Z,1509047184.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:25.093Z,1509047185.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-10-26T19:46:25.094Z,1509047185.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:25.492Z,1509047185.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-10-26T19:46:25.497Z,1509047185.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:25.903Z,1509047185.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-10-26T19:46:25.904Z,1509047185.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:26.058Z,1509047186.058 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-10-26T19:46:26.122Z,1509047186.122 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-10-26T19:46:26.123Z,1509047186.123 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-10-26T19:46:26.126Z,1509047186.126 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-10-26T19:46:26.139Z,1509047186.139 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-10-26T19:46:26.313Z,1509047186.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-10-26T19:46:26.314Z,1509047186.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:26.778Z,1509047186.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:27.119Z,1509047187.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:27.483Z,1509047187.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:27.920Z,1509047187.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:28.304Z,1509047188.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:28.729Z,1509047188.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:29.122Z,1509047189.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:29.482Z,1509047189.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:29.888Z,1509047189.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:30.304Z,1509047190.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:30.712Z,1509047190.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:31.106Z,1509047191.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:31.504Z,1509047191.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:31.887Z,1509047191.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:32.290Z,1509047192.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:32.689Z,1509047192.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:33.092Z,1509047193.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:33.489Z,1509047193.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:33.880Z,1509047193.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:34.294Z,1509047194.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:34.691Z,1509047194.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:35.082Z,1509047195.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:35.498Z,1509047195.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:35.894Z,1509047195.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:36.295Z,1509047196.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:36.692Z,1509047196.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:37.092Z,1509047197.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:37.491Z,1509047197.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:37.892Z,1509047197.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:38.299Z,1509047198.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:38.691Z,1509047198.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:39.089Z,1509047199.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:39.493Z,1509047199.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:39.893Z,1509047199.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:40.345Z,1509047200.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:40.700Z,1509047200.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:41.152Z,1509047201.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:41.552Z,1509047201.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:41.894Z,1509047201.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:42.338Z,1509047202.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:42.690Z,1509047202.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:43.127Z,1509047203.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:43.531Z,1509047203.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:43.891Z,1509047203.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:44.289Z,1509047204.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:44.688Z,1509047204.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:45.095Z,1509047205.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:45.507Z,1509047205.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:45.897Z,1509047205.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:46.297Z,1509047206.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:46.689Z,1509047206.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:47.088Z,1509047207.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:47.508Z,1509047207.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:47.906Z,1509047207.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:48.290Z,1509047208.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:48.686Z,1509047208.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:49.088Z,1509047209.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:49.493Z,1509047209.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:49.888Z,1509047209.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:50.294Z,1509047210.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:50.694Z,1509047210.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:51.094Z,1509047211.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:51.488Z,1509047211.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:51.893Z,1509047211.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:52.288Z,1509047212.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:52.690Z,1509047212.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:53.095Z,1509047213.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:53.494Z,1509047213.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:53.893Z,1509047213.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:53.897Z,1509047213.897 [Startup:StartupSatComms:A](INFO): Timed out from 2017-10-26T19:45:53.5Z
2017-10-26T19:46:53.897Z,1509047213.897 [Startup:StartupSatComms:A] Stopped
2017-10-26T19:46:53.897Z,1509047213.897 [Startup:StartupSatComms:B] Running Loop=1
2017-10-26T19:46:54.348Z,1509047214.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:54.363Z,1509047214.363 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-10-26T19:46:54.699Z,1509047214.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:55.081Z,1509047215.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:55.534Z,1509047215.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:55.935Z,1509047215.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:56.290Z,1509047216.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:56.690Z,1509047216.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:57.121Z,1509047217.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:57.486Z,1509047217.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:57.910Z,1509047217.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:58.346Z,1509047218.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:58.700Z,1509047218.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:59.084Z,1509047219.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:59.478Z,1509047219.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:46:59.881Z,1509047219.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:00.287Z,1509047220.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:00.714Z,1509047220.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:01.115Z,1509047221.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:01.484Z,1509047221.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:01.892Z,1509047221.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:02.293Z,1509047222.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:02.684Z,1509047222.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:03.086Z,1509047223.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:03.488Z,1509047223.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:03.886Z,1509047223.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:04.284Z,1509047224.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:04.715Z,1509047224.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:05.090Z,1509047225.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:05.485Z,1509047225.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:05.887Z,1509047225.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:06.312Z,1509047226.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:06.687Z,1509047226.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:07.086Z,1509047227.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:07.493Z,1509047227.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:07.887Z,1509047227.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:08.345Z,1509047228.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:08.690Z,1509047228.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:09.118Z,1509047229.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:09.516Z,1509047229.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:09.886Z,1509047229.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:10.346Z,1509047230.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:10.687Z,1509047230.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:11.127Z,1509047231.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:11.499Z,1509047231.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:11.922Z,1509047231.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:12.290Z,1509047232.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:12.729Z,1509047232.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:13.089Z,1509047233.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:13.501Z,1509047233.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:13.894Z,1509047233.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:14.292Z,1509047234.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:14.690Z,1509047234.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:15.090Z,1509047235.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:15.491Z,1509047235.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:15.884Z,1509047235.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:16.297Z,1509047236.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:16.693Z,1509047236.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:17.081Z,1509047237.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:17.491Z,1509047237.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:17.890Z,1509047237.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:18.295Z,1509047238.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:18.694Z,1509047238.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:19.090Z,1509047239.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:19.501Z,1509047239.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:19.889Z,1509047239.889 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:19.889Z,1509047239.889 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-10-26T19:47:19.889Z,1509047239.889 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T19:47:19.891Z,1509047239.891 [DeadReckonUsingSpeedCalculator](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:19.891Z,1509047239.891 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2017-10-26T19:47:19.891Z,1509047239.891 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2017-10-26T19:47:19.893Z,1509047239.893 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:19.893Z,1509047239.893 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-26T19:47:19.894Z,1509047239.894 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T19:47:19.906Z,1509047239.906 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T19:47:19.906Z,1509047239.906 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2017-10-26T19:47:19.906Z,1509047239.906 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T19:47:20.301Z,1509047240.301 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T19:47:20.301Z,1509047240.301 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-10-26T19:47:20.302Z,1509047240.302 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2017-10-26T19:47:20.302Z,1509047240.302 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2017-10-26T19:47:20.302Z,1509047240.302 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T19:47:20.302Z,1509047240.302 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-26T19:47:20.696Z,1509047240.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T19:47:20.696Z,1509047240.696 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T19:47:20.697Z,1509047240.697 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T19:47:20.697Z,1509047240.697 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2017-10-26T19:47:20.698Z,1509047240.698 [DeadReckonUsingSpeedCalculator](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T19:47:20.698Z,1509047240.698 [DeadReckonUsingSpeedCalculator](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T19:47:20.699Z,1509047240.699 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T19:47:20.699Z,1509047240.699 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T19:47:20.699Z,1509047240.699 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T19:47:21.095Z,1509047241.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:21.491Z,1509047241.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:21.894Z,1509047241.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:22.348Z,1509047242.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:22.709Z,1509047242.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:23.092Z,1509047243.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:23.502Z,1509047243.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:23.896Z,1509047243.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:24.296Z,1509047244.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:24.731Z,1509047244.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:25.090Z,1509047245.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:25.517Z,1509047245.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:25.893Z,1509047245.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:26.327Z,1509047246.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:26.731Z,1509047246.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:27.086Z,1509047247.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:27.486Z,1509047247.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:27.887Z,1509047247.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:28.287Z,1509047248.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:28.685Z,1509047248.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:29.095Z,1509047249.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:29.488Z,1509047249.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:29.887Z,1509047249.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:30.285Z,1509047250.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:30.694Z,1509047250.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:31.096Z,1509047251.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:31.483Z,1509047251.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:31.887Z,1509047251.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:32.286Z,1509047252.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:32.686Z,1509047252.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:33.088Z,1509047253.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:33.490Z,1509047253.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:33.891Z,1509047253.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:34.288Z,1509047254.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:34.690Z,1509047254.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:35.095Z,1509047255.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:35.524Z,1509047255.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:35.892Z,1509047255.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:36.343Z,1509047256.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:36.693Z,1509047256.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:37.093Z,1509047257.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:37.490Z,1509047257.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:37.892Z,1509047257.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:38.290Z,1509047258.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:38.746Z,1509047258.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:39.095Z,1509047259.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:39.497Z,1509047259.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:39.928Z,1509047259.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:40.296Z,1509047260.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:40.728Z,1509047260.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:41.129Z,1509047261.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:41.498Z,1509047261.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:41.891Z,1509047261.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:42.288Z,1509047262.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:42.693Z,1509047262.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:43.095Z,1509047263.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:43.495Z,1509047263.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:43.902Z,1509047263.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:44.305Z,1509047264.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:44.693Z,1509047264.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:45.100Z,1509047265.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:45.497Z,1509047265.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:45.888Z,1509047265.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:46.317Z,1509047266.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:46.696Z,1509047266.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:47.104Z,1509047267.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:47.497Z,1509047267.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:47.906Z,1509047267.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:48.303Z,1509047268.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:48.682Z,1509047268.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:49.084Z,1509047269.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:49.485Z,1509047269.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:49.892Z,1509047269.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:50.370Z,1509047270.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:50.690Z,1509047270.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:51.091Z,1509047271.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:51.489Z,1509047271.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:51.895Z,1509047271.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:52.302Z,1509047272.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:52.704Z,1509047272.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:53.089Z,1509047273.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:53.506Z,1509047273.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:53.897Z,1509047273.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:53.906Z,1509047273.906 [Startup:StartupSatComms:B](INFO): Timed out from 2017-10-26T19:46:53.9Z
2017-10-26T19:47:53.906Z,1509047273.906 [Startup:StartupSatComms:B] Stopped
2017-10-26T19:47:53.911Z,1509047273.911 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2017-10-26T19:47:53.911Z,1509047273.911 [Startup:StartupSatComms] Stopped
2017-10-26T19:47:53.911Z,1509047273.911 [Startup:StartupSatComms](DEBUG): Aggregate::uninitialize Startup:StartupSatComms
2017-10-26T19:47:53.912Z,1509047273.912 [Startup](INFO): Completed Startup
2017-10-26T19:47:53.912Z,1509047273.912 [MissionManager](INFO): Startup is completed.
2017-10-26T19:47:53.912Z,1509047273.912 [MissionManager](INFO): Uninitializing Mission Startup
2017-10-26T19:47:53.912Z,1509047273.912 [Startup] Stopped
2017-10-26T19:47:53.912Z,1509047273.912 [Startup](DEBUG): Aggregate::uninitialize Startup
2017-10-26T19:47:53.913Z,1509047273.913 [Startup:A.GoToSurface] Stopped
2017-10-26T19:47:53.913Z,1509047273.913 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2017-10-26T19:47:54.292Z,1509047274.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:54.296Z,1509047274.296 [MissionManager](IMPORTANT): Started mission Default
2017-10-26T19:47:54.296Z,1509047274.296 [Default] Running Loop=1
2017-10-26T19:47:54.296Z,1509047274.296 [Default](DEBUG): Aggregate::initialize Default
2017-10-26T19:47:54.296Z,1509047274.296 [Default:B.GoToSurface] Running Loop=1
2017-10-26T19:47:54.296Z,1509047274.296 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-10-26T19:47:54.297Z,1509047274.297 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-10-26T19:47:54.297Z,1509047274.297 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-10-26T19:47:54.297Z,1509047274.297 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-10-26T19:47:54.298Z,1509047274.298 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-10-26T19:47:54.298Z,1509047274.298 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-10-26T19:47:54.298Z,1509047274.298 [Default:A.Wait] Running Loop=1
2017-10-26T19:47:54.298Z,1509047274.298 [Default:A.Wait](DEBUG): Initialize Wait Component.
2017-10-26T19:47:54.748Z,1509047274.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:55.101Z,1509047275.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:55.516Z,1509047275.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:55.913Z,1509047275.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:56.304Z,1509047276.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:56.699Z,1509047276.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:57.100Z,1509047277.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:57.510Z,1509047277.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:57.887Z,1509047277.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:58.297Z,1509047278.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:58.689Z,1509047278.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:59.088Z,1509047279.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:59.491Z,1509047279.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:47:59.891Z,1509047279.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:00.288Z,1509047280.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:00.690Z,1509047280.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:01.091Z,1509047281.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:01.492Z,1509047281.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:01.889Z,1509047281.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:02.294Z,1509047282.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:02.691Z,1509047282.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:03.095Z,1509047283.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:03.498Z,1509047283.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:03.889Z,1509047283.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:04.329Z,1509047284.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:04.691Z,1509047284.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:05.091Z,1509047285.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:05.489Z,1509047285.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:05.889Z,1509047285.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:06.333Z,1509047286.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:06.701Z,1509047286.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:07.090Z,1509047287.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:07.494Z,1509047287.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:07.499Z,1509047287.499 [Default:A.Wait](INFO): Done Waiting.
2017-10-26T19:48:07.499Z,1509047287.499 [Default:A.Wait] Stopped
2017-10-26T19:48:07.499Z,1509047287.499 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2017-10-26T19:48:07.887Z,1509047287.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:07.891Z,1509047287.891 [Default:CheckIn] Running Loop=1
2017-10-26T19:48:07.891Z,1509047287.891 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-26T19:48:07.891Z,1509047287.891 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-26T19:48:08.304Z,1509047288.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:08.321Z,1509047288.321 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense time_fix
2017-10-26T19:48:08.687Z,1509047288.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:09.125Z,1509047289.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:09.501Z,1509047289.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:09.934Z,1509047289.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:10.298Z,1509047290.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:10.730Z,1509047290.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:11.092Z,1509047291.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:11.494Z,1509047291.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:11.891Z,1509047291.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:12.288Z,1509047292.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:12.695Z,1509047292.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:13.092Z,1509047293.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:13.493Z,1509047293.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:13.902Z,1509047293.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:14.305Z,1509047294.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:14.686Z,1509047294.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:15.097Z,1509047295.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:15.485Z,1509047295.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:15.900Z,1509047295.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:16.286Z,1509047296.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:16.688Z,1509047296.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:17.091Z,1509047297.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:17.495Z,1509047297.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:17.892Z,1509047297.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:18.336Z,1509047298.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:18.690Z,1509047298.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:19.092Z,1509047299.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:19.492Z,1509047299.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:19.893Z,1509047299.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:20.291Z,1509047300.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:20.701Z,1509047300.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:21.095Z,1509047301.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:21.518Z,1509047301.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:21.893Z,1509047301.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:22.174Z,1509047302.174 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-10-26T19:48:22.175Z,1509047302.175 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-10-26T19:48:22.175Z,1509047302.175 [Rowe_600LCM](ERROR): Communications Fault
2017-10-26T19:48:22.291Z,1509047302.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-10-26T19:48:22.293Z,1509047302.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:22.308Z,1509047302.308 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-10-26T19:48:22.580Z,1509047302.580 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-10-26T19:48:22.764Z,1509047302.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-10-26T19:48:22.765Z,1509047302.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:22.977Z,1509047302.977 [Rowe_600LCM](INFO): Powering down
2017-10-26T19:48:23.122Z,1509047303.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-10-26T19:48:23.123Z,1509047303.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:23.503Z,1509047303.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-10-26T19:48:23.505Z,1509047303.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:23.916Z,1509047303.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-10-26T19:48:23.917Z,1509047303.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:24.304Z,1509047304.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-10-26T19:48:24.305Z,1509047304.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:24.329Z,1509047304.329 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-10-26T19:48:24.329Z,1509047304.329 [Rowe_600LCM] No Fault, FailCount= 2
2017-10-26T19:48:24.595Z,1509047304.595 [Rowe_600LCM](INFO): Initializing
2017-10-26T19:48:24.595Z,1509047304.595 [Rowe_600LCM](INFO): Checking LCM
2017-10-26T19:48:24.595Z,1509047304.595 [Rowe_600LCM](INFO): LCM OK
2017-10-26T19:48:24.596Z,1509047304.596 [Rowe_600LCM](INFO): Powering up
2017-10-26T19:48:24.756Z,1509047304.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2017-10-26T19:48:24.757Z,1509047304.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:25.131Z,1509047305.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-10-26T19:48:25.132Z,1509047305.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:25.480Z,1509047305.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-10-26T19:48:25.481Z,1509047305.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:25.934Z,1509047305.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-10-26T19:48:25.935Z,1509047305.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:26.338Z,1509047306.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-10-26T19:48:26.339Z,1509047306.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:26.723Z,1509047306.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-10-26T19:48:26.724Z,1509047306.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:27.137Z,1509047307.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-10-26T19:48:27.138Z,1509047307.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:27.508Z,1509047307.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-10-26T19:48:27.509Z,1509047307.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:27.910Z,1509047307.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-10-26T19:48:27.911Z,1509047307.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:28.318Z,1509047308.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-10-26T19:48:28.319Z,1509047308.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:28.819Z,1509047308.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-10-26T19:48:28.820Z,1509047308.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:28.961Z,1509047308.961 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-10-26T19:48:29.171Z,1509047309.171 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-10-26T19:48:29.172Z,1509047309.172 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-10-26T19:48:29.173Z,1509047309.173 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-10-26T19:48:29.174Z,1509047309.174 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-10-26T19:48:29.195Z,1509047309.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-10-26T19:48:29.196Z,1509047309.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:29.491Z,1509047309.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-10-26T19:48:29.492Z,1509047309.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:29.940Z,1509047309.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:30.288Z,1509047310.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:30.699Z,1509047310.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:31.107Z,1509047311.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:31.507Z,1509047311.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:31.903Z,1509047311.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:32.320Z,1509047312.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:32.709Z,1509047312.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:33.094Z,1509047313.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:33.489Z,1509047313.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:33.891Z,1509047313.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:34.292Z,1509047314.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:34.691Z,1509047314.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:35.090Z,1509047315.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:35.517Z,1509047315.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:35.919Z,1509047315.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:36.392Z,1509047316.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:36.788Z,1509047316.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:37.096Z,1509047317.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:37.479Z,1509047317.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:37.914Z,1509047317.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:38.314Z,1509047318.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:38.723Z,1509047318.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:39.139Z,1509047319.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:39.486Z,1509047319.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:39.885Z,1509047319.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:40.343Z,1509047320.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:40.735Z,1509047320.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:41.138Z,1509047321.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:41.533Z,1509047321.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:45.980Z,1509047325.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:46.120Z,1509047326.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:46.477Z,1509047326.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:46.810Z,1509047326.810 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.003806
2017-10-26T19:48:46.878Z,1509047326.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:47.253Z,1509047327.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:47.654Z,1509047327.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:48.051Z,1509047328.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:48.451Z,1509047328.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:48.852Z,1509047328.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:49.341Z,1509047329.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:49.653Z,1509047329.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:50.104Z,1509047330.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:50.457Z,1509047330.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:50.884Z,1509047330.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:51.314Z,1509047331.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:51.654Z,1509047331.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:52.057Z,1509047332.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:52.496Z,1509047332.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:52.853Z,1509047332.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:53.293Z,1509047333.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:53.698Z,1509047333.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:54.061Z,1509047334.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:54.459Z,1509047334.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:54.866Z,1509047334.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:55.272Z,1509047335.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:55.666Z,1509047335.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:56.058Z,1509047336.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:56.455Z,1509047336.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:56.856Z,1509047336.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:57.252Z,1509047337.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:57.653Z,1509047337.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:58.054Z,1509047338.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:58.455Z,1509047338.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:58.859Z,1509047338.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:59.265Z,1509047339.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:48:59.665Z,1509047339.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:00.065Z,1509047340.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:00.466Z,1509047340.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:00.858Z,1509047340.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:01.258Z,1509047341.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:01.655Z,1509047341.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:02.059Z,1509047342.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:02.453Z,1509047342.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:02.855Z,1509047342.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:03.370Z,1509047343.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:03.654Z,1509047343.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:04.054Z,1509047344.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:04.503Z,1509047344.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:04.882Z,1509047344.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:05.284Z,1509047345.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:05.692Z,1509047345.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:06.061Z,1509047346.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:06.502Z,1509047346.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:06.856Z,1509047346.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:07.287Z,1509047347.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:07.704Z,1509047347.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:08.055Z,1509047348.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:08.455Z,1509047348.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:08.864Z,1509047348.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:09.256Z,1509047349.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:09.686Z,1509047349.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:10.061Z,1509047350.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:10.463Z,1509047350.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:10.863Z,1509047350.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:11.270Z,1509047351.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:11.662Z,1509047351.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:12.051Z,1509047352.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:12.449Z,1509047352.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:12.860Z,1509047352.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:13.263Z,1509047353.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:13.653Z,1509047353.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:14.066Z,1509047354.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:14.478Z,1509047354.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:14.866Z,1509047354.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:15.253Z,1509047355.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:15.662Z,1509047355.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:16.077Z,1509047356.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:16.468Z,1509047356.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:16.860Z,1509047356.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:17.306Z,1509047357.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:17.671Z,1509047357.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:18.062Z,1509047358.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:18.501Z,1509047358.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:18.856Z,1509047358.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:19.262Z,1509047359.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:19.702Z,1509047359.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:20.058Z,1509047360.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:20.500Z,1509047360.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:20.861Z,1509047360.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:24.329Z,1509047364.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:24.478Z,1509047364.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:24.850Z,1509047364.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:25.228Z,1509047365.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:25.622Z,1509047365.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:26.022Z,1509047366.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:26.418Z,1509047366.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:26.823Z,1509047366.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:27.218Z,1509047367.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:27.619Z,1509047367.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:28.031Z,1509047368.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:28.419Z,1509047368.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:28.821Z,1509047368.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:29.217Z,1509047369.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:29.626Z,1509047369.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:30.023Z,1509047370.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:30.419Z,1509047370.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:30.822Z,1509047370.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:31.226Z,1509047371.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:31.628Z,1509047371.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:32.021Z,1509047372.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:32.423Z,1509047372.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:32.820Z,1509047372.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:33.180Z,1509047373.180 [NAL9602](INFO): SBD MO Status=2, MOMSN=2551, MT Status=2, MTMSN=0
2017-10-26T19:49:33.180Z,1509047373.180 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2017-10-26T19:49:33.236Z,1509047373.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:33.662Z,1509047373.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:34.020Z,1509047374.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:34.433Z,1509047374.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:34.826Z,1509047374.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:35.267Z,1509047375.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:35.646Z,1509047375.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:36.027Z,1509047376.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:36.427Z,1509047376.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:36.853Z,1509047376.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:37.230Z,1509047377.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:37.682Z,1509047377.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:38.035Z,1509047378.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:38.456Z,1509047378.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:38.875Z,1509047378.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:39.249Z,1509047379.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:39.639Z,1509047379.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:40.019Z,1509047380.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:40.418Z,1509047380.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:40.816Z,1509047380.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:41.225Z,1509047381.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:41.617Z,1509047381.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:42.018Z,1509047382.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:42.422Z,1509047382.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:42.818Z,1509047382.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:43.220Z,1509047383.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:43.623Z,1509047383.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:44.020Z,1509047384.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:44.419Z,1509047384.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:44.815Z,1509047384.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:45.226Z,1509047385.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:45.632Z,1509047385.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:46.037Z,1509047386.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:46.440Z,1509047386.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:46.821Z,1509047386.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:47.228Z,1509047387.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:47.640Z,1509047387.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:48.029Z,1509047388.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:48.427Z,1509047388.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:48.822Z,1509047388.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:49.268Z,1509047389.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:49.649Z,1509047389.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:50.028Z,1509047390.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:50.446Z,1509047390.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:50.892Z,1509047390.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:51.232Z,1509047391.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:51.632Z,1509047391.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:52.045Z,1509047392.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:52.428Z,1509047392.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:52.870Z,1509047392.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:53.247Z,1509047393.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:53.630Z,1509047393.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:54.032Z,1509047394.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:54.424Z,1509047394.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:54.845Z,1509047394.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:55.246Z,1509047395.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:55.631Z,1509047395.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:56.014Z,1509047396.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:56.413Z,1509047396.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:56.820Z,1509047396.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:57.220Z,1509047397.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:57.616Z,1509047397.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:58.016Z,1509047398.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:58.417Z,1509047398.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:58.818Z,1509047398.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:59.218Z,1509047399.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:49:59.632Z,1509047399.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:00.029Z,1509047400.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:00.424Z,1509047400.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:00.824Z,1509047400.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:01.226Z,1509047401.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:01.580Z,1509047401.580 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-26T19:50:01.662Z,1509047401.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:02.029Z,1509047402.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:02.429Z,1509047402.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:02.823Z,1509047402.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:03.235Z,1509047403.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:03.639Z,1509047403.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:04.083Z,1509047404.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:04.424Z,1509047404.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:04.827Z,1509047404.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:05.265Z,1509047405.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:05.627Z,1509047405.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:06.063Z,1509047406.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:06.383Z,1509047406.383 [NAL9602](INFO): GPS fix at 20171026T194907: (36.802757, -121.788044)
2017-10-26T19:50:06.462Z,1509047406.462 [Default:CheckIn:Read_GPS] Stopped
2017-10-26T19:50:06.462Z,1509047406.462 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-26T19:50:06.866Z,1509047406.866 [DeadReckonUsingMultipleVelocitySources](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:06.866Z,1509047406.866 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-10-26T19:50:06.866Z,1509047406.866 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T19:50:06.872Z,1509047406.872 [DeadReckonWithRespectToSeafloor](ERROR): Caught NaN! Will not write estimated position: latitude_ = nan, longitude_ = nan, depth_ = nan, horizontalPathLengthSinceLastFix_ = nan, latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:06.872Z,1509047406.872 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-26T19:50:06.872Z,1509047406.872 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T19:50:06.874Z,1509047406.874 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2017-10-26T19:50:06.887Z,1509047406.887 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T19:50:06.887Z,1509047406.887 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T19:50:07.484Z,1509047407.484 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T19:50:07.484Z,1509047407.484 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-10-26T19:50:07.485Z,1509047407.485 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T19:50:07.485Z,1509047407.485 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-26T19:50:07.751Z,1509047407.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T19:50:07.752Z,1509047407.752 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T19:50:07.752Z,1509047407.752 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T19:50:07.755Z,1509047407.755 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T19:50:07.755Z,1509047407.755 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T19:50:07.755Z,1509047407.755 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T19:50:13.580Z,1509047413.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:13.709Z,1509047413.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:14.051Z,1509047414.051 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20171026T172315/Courier0060.lzma
2017-10-26T19:50:14.117Z,1509047414.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:14.482Z,1509047414.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:14.836Z,1509047414.836 [DataOverHttps](INFO): Moved sent file to Logs/20171026T172315/Courier0060.lzma.bak
2017-10-26T19:50:14.836Z,1509047414.836 [DataOverHttps](INFO): SBD MOMSN=5165070
2017-10-26T19:50:15.038Z,1509047415.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:15.374Z,1509047415.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:15.681Z,1509047415.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:19.389Z,1509047419.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:19.604Z,1509047419.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:19.929Z,1509047419.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:20.346Z,1509047420.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:20.752Z,1509047420.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:21.109Z,1509047421.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:24.697Z,1509047424.697 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-10-26T19:50:24.697Z,1509047424.697 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-10-26T19:50:24.697Z,1509047424.697 [Rowe_600LCM](ERROR): Communications Fault
2017-10-26T19:50:25.102Z,1509047425.102 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-10-26T19:50:25.380Z,1509047425.380 [Rowe_600LCM](INFO): Powering down
2017-10-26T19:50:25.461Z,1509047425.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-10-26T19:50:25.467Z,1509047425.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:25.511Z,1509047425.511 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-10-26T19:50:27.130Z,1509047427.130 [DataOverHttps](INFO): Sending 126 bytes from file Logs/20171026T194410/Courier0000.lzma
2017-10-26T19:50:27.215Z,1509047427.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-10-26T19:50:27.216Z,1509047427.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:27.242Z,1509047427.242 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-10-26T19:50:27.242Z,1509047427.242 [Rowe_600LCM] No Fault, FailCount= 3
2017-10-26T19:50:27.327Z,1509047427.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.2 s old, using for 20.0 s.
2017-10-26T19:50:27.328Z,1509047427.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:27.389Z,1509047427.389 [Rowe_600LCM](INFO): Initializing
2017-10-26T19:50:27.390Z,1509047427.390 [Rowe_600LCM](INFO): Checking LCM
2017-10-26T19:50:27.390Z,1509047427.390 [Rowe_600LCM](INFO): LCM OK
2017-10-26T19:50:27.390Z,1509047427.390 [Rowe_600LCM](INFO): Powering up
2017-10-26T19:50:27.660Z,1509047427.660 [DataOverHttps](INFO): Moved sent file to Logs/20171026T194410/Courier0000.lzma.bak
2017-10-26T19:50:27.660Z,1509047427.660 [DataOverHttps](INFO): SBD MOMSN=5165072
2017-10-26T19:50:27.697Z,1509047427.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.6 s old, using for 20.0 s.
2017-10-26T19:50:27.698Z,1509047427.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:28.321Z,1509047428.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-10-26T19:50:28.322Z,1509047428.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:28.525Z,1509047428.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.4 s old, using for 20.0 s.
2017-10-26T19:50:28.526Z,1509047428.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:31.608Z,1509047431.608 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-10-26T19:50:31.725Z,1509047431.725 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-10-26T19:50:31.727Z,1509047431.727 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-10-26T19:50:31.728Z,1509047431.728 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-10-26T19:50:31.729Z,1509047431.729 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-10-26T19:50:32.197Z,1509047432.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:32.352Z,1509047432.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:32.731Z,1509047432.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:33.121Z,1509047433.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:33.472Z,1509047433.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:33.902Z,1509047433.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:37.376Z,1509047437.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:37.467Z,1509047437.467 [DataOverHttps](INFO): Sending 213 bytes from file Logs/20171026T194410/Courier0004.lzma
2017-10-26T19:50:37.543Z,1509047437.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:37.912Z,1509047437.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:38.259Z,1509047438.259 [DataOverHttps](INFO): Moved sent file to Logs/20171026T194410/Courier0004.lzma.bak
2017-10-26T19:50:38.259Z,1509047438.259 [DataOverHttps](INFO): SBD MOMSN=5165077
2017-10-26T19:50:38.340Z,1509047438.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:38.932Z,1509047438.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:39.111Z,1509047439.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:42.700Z,1509047442.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:42.866Z,1509047442.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:43.220Z,1509047443.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:43.669Z,1509047443.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:43.965Z,1509047443.965 [NAL9602](INFO): Powering down
2017-10-26T19:50:44.040Z,1509047444.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:44.422Z,1509047444.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:47.948Z,1509047447.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:48.040Z,1509047448.040 [DataOverHttps](INFO): Sending 239 bytes from file Logs/20171026T172315/Express0061.lzma
2017-10-26T19:50:48.093Z,1509047448.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:48.468Z,1509047448.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:48.796Z,1509047448.796 [DataOverHttps](INFO): Moved sent file to Logs/20171026T172315/Express0061.lzma.bak
2017-10-26T19:50:48.797Z,1509047448.797 [DataOverHttps](INFO): SBD MOMSN=5165080
2017-10-26T19:50:48.862Z,1509047448.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:49.427Z,1509047449.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:49.674Z,1509047449.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:53.044Z,1509047453.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:53.190Z,1509047453.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:53.590Z,1509047453.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:53.982Z,1509047453.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:54.386Z,1509047454.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:54.788Z,1509047454.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:59.790Z,1509047459.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:50:59.873Z,1509047459.873 [DataOverHttps](INFO): Sending 675 bytes from file Logs/20171026T194410/Express0001.lzma
2017-10-26T19:50:59.960Z,1509047459.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:00.387Z,1509047460.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:00.643Z,1509047460.643 [DataOverHttps](INFO): Moved sent file to Logs/20171026T194410/Express0001.lzma.bak
2017-10-26T19:51:00.643Z,1509047460.643 [DataOverHttps](INFO): SBD MOMSN=5165085
2017-10-26T19:51:00.730Z,1509047460.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:01.561Z,1509047461.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:01.771Z,1509047461.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:05.222Z,1509047465.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:05.365Z,1509047465.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:05.731Z,1509047465.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:06.098Z,1509047466.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:06.492Z,1509047466.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:06.922Z,1509047466.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:10.242Z,1509047470.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:10.388Z,1509047470.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:10.717Z,1509047470.717 [DataOverHttps](INFO): Sending 359 bytes from file Logs/20171026T194410/Express0005.lzma
2017-10-26T19:51:10.777Z,1509047470.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:11.165Z,1509047471.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:11.499Z,1509047471.499 [DataOverHttps](INFO): Moved sent file to Logs/20171026T194410/Express0005.lzma.bak
2017-10-26T19:51:11.500Z,1509047471.500 [DataOverHttps](INFO): SBD MOMSN=5165097
2017-10-26T19:51:11.562Z,1509047471.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:12.146Z,1509047472.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:12.153Z,1509047472.153 [Default:CheckIn:Read_Iridium] Stopped
2017-10-26T19:51:12.153Z,1509047472.153 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-26T19:51:12.153Z,1509047472.153 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-26T19:51:12.349Z,1509047472.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:16.049Z,1509047476.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:16.201Z,1509047476.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:16.524Z,1509047476.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:16.929Z,1509047476.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:17.328Z,1509047477.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:17.762Z,1509047477.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:18.147Z,1509047478.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:18.524Z,1509047478.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:18.000Z,1509047479.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:19.325Z,1509047479.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:19.766Z,1509047479.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:20.138Z,1509047480.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:20.547Z,1509047480.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:20.925Z,1509047480.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:21.331Z,1509047481.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:21.736Z,1509047481.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:22.128Z,1509047482.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:22.537Z,1509047482.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:22.921Z,1509047482.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:23.325Z,1509047483.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:23.727Z,1509047483.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:24.125Z,1509047484.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:24.524Z,1509047484.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:24.926Z,1509047484.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:25.326Z,1509047485.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:25.722Z,1509047485.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:26.121Z,1509047486.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:26.522Z,1509047486.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:26.921Z,1509047486.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:27.333Z,1509047487.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:27.728Z,1509047487.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:28.121Z,1509047488.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:28.535Z,1509047488.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:28.931Z,1509047488.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:29.324Z,1509047489.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:29.735Z,1509047489.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:30.141Z,1509047490.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:30.532Z,1509047490.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:30.933Z,1509047490.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:31.332Z,1509047491.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:31.730Z,1509047491.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:32.132Z,1509047492.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:32.586Z,1509047492.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:32.917Z,1509047492.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:33.349Z,1509047493.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:33.726Z,1509047493.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:34.159Z,1509047494.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:34.554Z,1509047494.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:34.922Z,1509047494.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:35.325Z,1509047495.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:35.725Z,1509047495.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:36.123Z,1509047496.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:36.523Z,1509047496.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:36.931Z,1509047496.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:37.340Z,1509047497.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:37.719Z,1509047497.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:38.123Z,1509047498.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:38.517Z,1509047498.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:38.917Z,1509047498.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:39.327Z,1509047499.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:39.719Z,1509047499.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:40.122Z,1509047500.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:40.522Z,1509047500.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:40.919Z,1509047500.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:41.365Z,1509047501.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:41.726Z,1509047501.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:42.127Z,1509047502.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:42.523Z,1509047502.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:42.929Z,1509047502.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:43.333Z,1509047503.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:43.725Z,1509047503.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:44.125Z,1509047504.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:44.527Z,1509047504.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:44.932Z,1509047504.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:45.336Z,1509047505.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:45.735Z,1509047505.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:46.129Z,1509047506.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:46.550Z,1509047506.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:46.952Z,1509047506.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:47.314Z,1509047507.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:47.744Z,1509047507.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:48.142Z,1509047508.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:48.541Z,1509047508.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:48.959Z,1509047508.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:49.327Z,1509047509.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:49.722Z,1509047509.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:50.123Z,1509047510.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:50.533Z,1509047510.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:50.928Z,1509047510.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:51.325Z,1509047511.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:51.727Z,1509047511.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:52.123Z,1509047512.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:52.531Z,1509047512.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:52.972Z,1509047512.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:53.325Z,1509047513.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:53.721Z,1509047513.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:54.150Z,1509047514.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:54.527Z,1509047514.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:54.942Z,1509047514.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:55.358Z,1509047515.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:55.739Z,1509047515.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:56.120Z,1509047516.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:56.520Z,1509047516.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:56.923Z,1509047516.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:57.352Z,1509047517.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:57.732Z,1509047517.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:58.133Z,1509047518.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:58.531Z,1509047518.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:58.930Z,1509047518.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:59.330Z,1509047519.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:51:59.734Z,1509047519.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:00.132Z,1509047520.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:00.527Z,1509047520.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:00.927Z,1509047520.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:01.393Z,1509047521.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:01.721Z,1509047521.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:02.144Z,1509047522.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:02.528Z,1509047522.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:02.967Z,1509047522.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:03.371Z,1509047523.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:03.729Z,1509047523.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:04.124Z,1509047524.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:04.523Z,1509047524.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:04.931Z,1509047524.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:05.328Z,1509047525.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:05.732Z,1509047525.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:06.132Z,1509047526.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:06.533Z,1509047526.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:06.934Z,1509047526.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:07.335Z,1509047527.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:07.735Z,1509047527.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:08.135Z,1509047528.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:08.508Z,1509047528.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:08.916Z,1509047528.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:09.353Z,1509047529.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:09.711Z,1509047529.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:10.147Z,1509047530.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:10.520Z,1509047530.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:10.920Z,1509047530.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:11.329Z,1509047531.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:11.729Z,1509047531.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:12.123Z,1509047532.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:12.522Z,1509047532.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:12.926Z,1509047532.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:16.451Z,1509047536.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:16.612Z,1509047536.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:16.941Z,1509047536.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:17.377Z,1509047537.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:17.734Z,1509047537.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:18.152Z,1509047538.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:18.553Z,1509047538.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:18.931Z,1509047538.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:19.343Z,1509047539.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:19.744Z,1509047539.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:20.142Z,1509047540.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:20.521Z,1509047540.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:20.926Z,1509047540.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:21.323Z,1509047541.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:21.723Z,1509047541.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:22.123Z,1509047542.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:22.523Z,1509047542.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:23.016Z,1509047543.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:23.361Z,1509047543.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:23.726Z,1509047543.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:24.132Z,1509047544.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:24.527Z,1509047544.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:24.928Z,1509047544.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:25.324Z,1509047545.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:25.731Z,1509047545.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:26.139Z,1509047546.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:26.528Z,1509047546.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:26.937Z,1509047546.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:27.334Z,1509047547.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:27.580Z,1509047547.580 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-10-26T19:52:27.580Z,1509047547.580 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-10-26T19:52:27.580Z,1509047547.580 [Rowe_600LCM](ERROR): Communications Fault
2017-10-26T19:52:27.742Z,1509047547.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-10-26T19:52:27.743Z,1509047547.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:27.789Z,1509047547.789 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-10-26T19:52:27.984Z,1509047547.984 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-10-26T19:52:28.228Z,1509047548.228 [Rowe_600LCM](INFO): Powering down
2017-10-26T19:52:28.237Z,1509047548.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-10-26T19:52:28.238Z,1509047548.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:28.580Z,1509047548.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-10-26T19:52:28.582Z,1509047548.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:28.965Z,1509047548.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-10-26T19:52:28.967Z,1509047548.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:29.361Z,1509047549.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-10-26T19:52:29.362Z,1509047549.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:29.737Z,1509047549.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-10-26T19:52:29.738Z,1509047549.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:29.790Z,1509047549.790 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-10-26T19:52:29.796Z,1509047549.796 [Rowe_600LCM] No Fault, FailCount= 4
2017-10-26T19:52:29.851Z,1509047549.851 [Rowe_600LCM](INFO): Initializing
2017-10-26T19:52:29.852Z,1509047549.852 [Rowe_600LCM](INFO): Checking LCM
2017-10-26T19:52:29.852Z,1509047549.852 [Rowe_600LCM](INFO): LCM OK
2017-10-26T19:52:29.852Z,1509047549.852 [Rowe_600LCM](INFO): Powering up
2017-10-26T19:52:30.158Z,1509047550.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-10-26T19:52:30.159Z,1509047550.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:30.604Z,1509047550.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-10-26T19:52:30.605Z,1509047550.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:30.938Z,1509047550.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-10-26T19:52:30.939Z,1509047550.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:31.360Z,1509047551.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-10-26T19:52:31.361Z,1509047551.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:31.741Z,1509047551.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-10-26T19:52:31.751Z,1509047551.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:32.120Z,1509047552.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-10-26T19:52:32.121Z,1509047552.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:32.521Z,1509047552.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-10-26T19:52:32.522Z,1509047552.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:32.954Z,1509047552.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-10-26T19:52:32.955Z,1509047552.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:33.326Z,1509047553.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-10-26T19:52:33.327Z,1509047553.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:33.718Z,1509047553.718 [BPC1](ERROR): Failed to receive battery data
2017-10-26T19:52:33.718Z,1509047553.718 [BPC1] Communications Fault, FailCount= 1
2017-10-26T19:52:33.719Z,1509047553.719 [BPC1](ERROR): Communications Fault
2017-10-26T19:52:33.727Z,1509047553.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-10-26T19:52:33.728Z,1509047553.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:33.744Z,1509047553.744 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T19:52:33.975Z,1509047553.975 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-10-26T19:52:34.045Z,1509047554.045 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-10-26T19:52:34.047Z,1509047554.047 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-10-26T19:52:34.048Z,1509047554.048 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-10-26T19:52:34.049Z,1509047554.049 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-10-26T19:52:34.162Z,1509047554.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-10-26T19:52:34.164Z,1509047554.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:34.526Z,1509047554.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:34.925Z,1509047554.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:34.990Z,1509047554.990 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T19:52:34.990Z,1509047554.990 [BPC1] No Fault, FailCount= 1
2017-10-26T19:52:35.404Z,1509047555.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:35.730Z,1509047555.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:36.131Z,1509047556.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:36.528Z,1509047556.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:36.972Z,1509047556.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:37.330Z,1509047557.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:37.730Z,1509047557.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:38.128Z,1509047558.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:38.537Z,1509047558.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:38.935Z,1509047558.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:39.325Z,1509047559.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:39.733Z,1509047559.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:40.133Z,1509047560.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:40.537Z,1509047560.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:40.926Z,1509047560.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:41.335Z,1509047561.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:41.735Z,1509047561.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:42.156Z,1509047562.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:42.535Z,1509047562.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:42.950Z,1509047562.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:43.339Z,1509047563.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:43.763Z,1509047563.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:44.164Z,1509047564.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:44.520Z,1509047564.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:44.922Z,1509047564.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:45.322Z,1509047565.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:45.726Z,1509047565.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:46.130Z,1509047566.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:46.528Z,1509047566.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:46.927Z,1509047566.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:47.321Z,1509047567.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:47.724Z,1509047567.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:48.135Z,1509047568.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:48.525Z,1509047568.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:48.939Z,1509047568.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:49.332Z,1509047569.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:49.731Z,1509047569.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:50.137Z,1509047570.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:50.529Z,1509047570.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:50.929Z,1509047570.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:51.326Z,1509047571.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:51.735Z,1509047571.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:52.149Z,1509047572.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:52.525Z,1509047572.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:52.938Z,1509047572.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:53.333Z,1509047573.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:53.727Z,1509047573.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:54.129Z,1509047574.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:54.535Z,1509047574.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:54.960Z,1509047574.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:55.341Z,1509047575.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:55.743Z,1509047575.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:56.143Z,1509047576.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:56.594Z,1509047576.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:56.955Z,1509047576.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:57.324Z,1509047577.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:57.762Z,1509047577.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:58.157Z,1509047578.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:58.607Z,1509047578.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:58.926Z,1509047578.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:59.327Z,1509047579.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:52:59.727Z,1509047579.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:00.124Z,1509047580.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:00.534Z,1509047580.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:00.925Z,1509047580.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:01.325Z,1509047581.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:01.724Z,1509047581.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:02.129Z,1509047582.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:02.527Z,1509047582.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:02.920Z,1509047582.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:03.333Z,1509047583.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:03.724Z,1509047583.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:04.142Z,1509047584.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:04.531Z,1509047584.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:04.935Z,1509047584.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:05.336Z,1509047585.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:05.733Z,1509047585.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:06.161Z,1509047586.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:06.532Z,1509047586.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:06.933Z,1509047586.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:07.335Z,1509047587.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:07.729Z,1509047587.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:08.138Z,1509047588.138 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:08.138Z,1509047588.138 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2017-10-26T19:53:08.138Z,1509047588.138 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T19:53:08.142Z,1509047588.142 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:08.142Z,1509047588.142 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-26T19:53:08.143Z,1509047588.143 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T19:53:08.181Z,1509047588.181 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T19:53:08.181Z,1509047588.181 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T19:53:08.565Z,1509047588.565 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T19:53:08.565Z,1509047588.565 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2017-10-26T19:53:08.566Z,1509047588.566 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T19:53:08.566Z,1509047588.566 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-26T19:53:08.921Z,1509047588.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T19:53:08.921Z,1509047588.921 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T19:53:08.922Z,1509047588.922 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T19:53:08.944Z,1509047588.944 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T19:53:08.945Z,1509047588.945 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T19:53:08.945Z,1509047588.945 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T19:53:09.315Z,1509047589.315 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T19:53:09.315Z,1509047589.315 [BPC1] Data Fault, FailCount= 1
2017-10-26T19:53:09.315Z,1509047589.315 [BPC1](ERROR): Data Fault
2017-10-26T19:53:09.324Z,1509047589.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:09.373Z,1509047589.373 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T19:53:09.755Z,1509047589.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:10.126Z,1509047590.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:10.607Z,1509047590.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:10.630Z,1509047590.630 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T19:53:10.630Z,1509047590.630 [BPC1] No Fault, FailCount= 1
2017-10-26T19:53:10.966Z,1509047590.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:11.325Z,1509047591.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:11.765Z,1509047591.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:12.131Z,1509047592.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:12.604Z,1509047592.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:12.928Z,1509047592.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:16.578Z,1509047596.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:16.690Z,1509047596.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:17.078Z,1509047597.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:17.478Z,1509047597.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:17.883Z,1509047597.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:18.279Z,1509047598.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:18.682Z,1509047598.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:19.119Z,1509047599.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:19.479Z,1509047599.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:19.882Z,1509047599.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:20.276Z,1509047600.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:20.688Z,1509047600.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:21.093Z,1509047601.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:21.486Z,1509047601.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:21.883Z,1509047601.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:22.349Z,1509047602.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:22.680Z,1509047602.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:23.080Z,1509047603.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:23.502Z,1509047603.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:23.884Z,1509047603.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:24.294Z,1509047604.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:24.685Z,1509047604.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:25.108Z,1509047605.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:25.508Z,1509047605.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:25.890Z,1509047605.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:26.288Z,1509047606.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:26.686Z,1509047606.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:27.096Z,1509047607.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:27.494Z,1509047607.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:27.872Z,1509047607.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:28.294Z,1509047608.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:28.693Z,1509047608.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:29.075Z,1509047609.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:29.465Z,1509047609.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:29.899Z,1509047609.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:30.275Z,1509047610.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:30.674Z,1509047610.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:31.072Z,1509047611.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:31.475Z,1509047611.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:31.873Z,1509047611.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:32.282Z,1509047612.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:32.679Z,1509047612.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:33.079Z,1509047613.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:33.481Z,1509047613.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:33.875Z,1509047613.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:34.287Z,1509047614.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:34.681Z,1509047614.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:35.087Z,1509047615.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:35.483Z,1509047615.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:35.904Z,1509047615.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:36.332Z,1509047616.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:36.690Z,1509047616.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:37.085Z,1509047617.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:37.507Z,1509047617.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:37.891Z,1509047617.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:38.287Z,1509047618.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:38.708Z,1509047618.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:39.091Z,1509047619.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:39.510Z,1509047619.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:39.889Z,1509047619.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:40.304Z,1509047620.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:40.696Z,1509047620.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:41.088Z,1509047621.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:41.494Z,1509047621.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:41.889Z,1509047621.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:42.289Z,1509047622.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:42.677Z,1509047622.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:43.072Z,1509047623.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:43.474Z,1509047623.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:43.873Z,1509047623.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:44.278Z,1509047624.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:44.685Z,1509047624.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:45.075Z,1509047625.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:45.481Z,1509047625.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:45.881Z,1509047625.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:46.281Z,1509047626.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:46.678Z,1509047626.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:47.081Z,1509047627.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:47.478Z,1509047627.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:47.879Z,1509047627.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:48.278Z,1509047628.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:48.680Z,1509047628.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:49.107Z,1509047629.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:49.485Z,1509047629.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:49.880Z,1509047629.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:50.327Z,1509047630.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:50.728Z,1509047630.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:51.074Z,1509047631.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:51.478Z,1509047631.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:51.913Z,1509047631.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:52.280Z,1509047632.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:52.680Z,1509047632.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:53.126Z,1509047633.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:53.483Z,1509047633.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:53.896Z,1509047633.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:54.305Z,1509047634.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:54.687Z,1509047634.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:55.078Z,1509047635.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:55.479Z,1509047635.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:55.880Z,1509047635.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:56.283Z,1509047636.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:56.684Z,1509047636.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:57.085Z,1509047637.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:57.484Z,1509047637.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:57.889Z,1509047637.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:58.286Z,1509047638.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:58.660Z,1509047638.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:59.088Z,1509047639.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:59.488Z,1509047639.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:53:59.865Z,1509047639.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:00.290Z,1509047640.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:00.672Z,1509047640.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:01.124Z,1509047641.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:01.492Z,1509047641.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:01.867Z,1509047641.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:02.277Z,1509047642.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:02.682Z,1509047642.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:03.070Z,1509047643.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:03.483Z,1509047643.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:03.880Z,1509047643.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:04.333Z,1509047644.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:04.675Z,1509047644.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:05.132Z,1509047645.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:05.486Z,1509047645.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:05.881Z,1509047645.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:06.279Z,1509047646.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:06.693Z,1509047646.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:07.078Z,1509047647.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:07.485Z,1509047647.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:07.913Z,1509047647.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:08.281Z,1509047648.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:08.726Z,1509047648.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:09.117Z,1509047649.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:09.479Z,1509047649.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:09.880Z,1509047649.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:10.281Z,1509047650.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:10.681Z,1509047650.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:11.082Z,1509047651.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:11.478Z,1509047651.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:11.874Z,1509047651.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:12.286Z,1509047652.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:12.689Z,1509047652.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:13.081Z,1509047653.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:16.592Z,1509047656.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:16.704Z,1509047656.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:17.107Z,1509047657.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:17.504Z,1509047657.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:17.908Z,1509047657.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:18.347Z,1509047658.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:18.714Z,1509047658.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:19.113Z,1509047659.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:19.567Z,1509047659.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:19.591Z,1509047659.591 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T19:54:19.915Z,1509047659.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:20.318Z,1509047660.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:20.704Z,1509047660.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:21.166Z,1509047661.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:21.514Z,1509047661.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:21.907Z,1509047661.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:22.328Z,1509047662.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:22.717Z,1509047662.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:23.134Z,1509047663.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:23.531Z,1509047663.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:23.914Z,1509047663.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:24.299Z,1509047664.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:24.703Z,1509047664.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:25.105Z,1509047665.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:25.501Z,1509047665.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:25.900Z,1509047665.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:26.307Z,1509047666.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:26.701Z,1509047666.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:27.102Z,1509047667.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:27.503Z,1509047667.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:27.902Z,1509047667.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:28.309Z,1509047668.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:28.701Z,1509047668.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:29.101Z,1509047669.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:29.505Z,1509047669.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:29.902Z,1509047669.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:30.098Z,1509047670.098 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-10-26T19:54:30.098Z,1509047670.098 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-10-26T19:54:30.098Z,1509047670.098 [Rowe_600LCM](ERROR): Communications Fault
2017-10-26T19:54:30.302Z,1509047670.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-10-26T19:54:30.303Z,1509047670.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:30.344Z,1509047670.344 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-10-26T19:54:30.345Z,1509047670.345 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-10-26T19:54:30.502Z,1509047670.502 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-10-26T19:54:30.618Z,1509047670.618 [Rowe_600LCM](INFO): Powering down
2017-10-26T19:54:30.716Z,1509047670.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-10-26T19:54:30.717Z,1509047670.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:31.102Z,1509047671.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-10-26T19:54:31.103Z,1509047671.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:31.502Z,1509047671.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-10-26T19:54:31.503Z,1509047671.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:31.904Z,1509047671.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-10-26T19:54:31.905Z,1509047671.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:32.310Z,1509047672.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-10-26T19:54:32.311Z,1509047672.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:32.710Z,1509047672.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-10-26T19:54:32.711Z,1509047672.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:33.105Z,1509047673.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-10-26T19:54:33.107Z,1509047673.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:33.530Z,1509047673.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-10-26T19:54:33.531Z,1509047673.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:33.918Z,1509047673.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-10-26T19:54:33.919Z,1509047673.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:34.335Z,1509047674.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-10-26T19:54:34.352Z,1509047674.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:34.714Z,1509047674.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-10-26T19:54:34.715Z,1509047674.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:35.121Z,1509047675.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-10-26T19:54:35.134Z,1509047675.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:35.544Z,1509047675.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-10-26T19:54:35.545Z,1509047675.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:35.922Z,1509047675.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-10-26T19:54:35.923Z,1509047675.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:36.355Z,1509047676.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-10-26T19:54:36.356Z,1509047676.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:36.754Z,1509047676.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-10-26T19:54:36.755Z,1509047676.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:37.109Z,1509047677.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-10-26T19:54:37.110Z,1509047677.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:37.520Z,1509047677.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-10-26T19:54:37.521Z,1509047677.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:37.928Z,1509047677.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-10-26T19:54:37.929Z,1509047677.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:38.308Z,1509047678.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-10-26T19:54:38.309Z,1509047678.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:38.709Z,1509047678.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-10-26T19:54:38.709Z,1509047678.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:39.106Z,1509047679.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-10-26T19:54:39.107Z,1509047679.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:39.507Z,1509047679.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-10-26T19:54:39.508Z,1509047679.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:39.909Z,1509047679.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-10-26T19:54:39.910Z,1509047679.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:40.310Z,1509047680.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-10-26T19:54:40.311Z,1509047680.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:40.711Z,1509047680.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-10-26T19:54:40.712Z,1509047680.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:41.102Z,1509047681.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-10-26T19:54:41.103Z,1509047681.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:41.501Z,1509047681.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-10-26T19:54:41.502Z,1509047681.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:41.899Z,1509047681.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-10-26T19:54:41.900Z,1509047681.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:42.301Z,1509047682.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-10-26T19:54:42.302Z,1509047682.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:42.707Z,1509047682.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-10-26T19:54:42.708Z,1509047682.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:43.101Z,1509047683.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-10-26T19:54:43.102Z,1509047683.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:43.503Z,1509047683.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-10-26T19:54:43.504Z,1509047683.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:43.909Z,1509047683.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-10-26T19:54:43.910Z,1509047683.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:44.305Z,1509047684.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-10-26T19:54:44.306Z,1509047684.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:44.714Z,1509047684.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-10-26T19:54:44.715Z,1509047684.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:45.107Z,1509047685.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-10-26T19:54:45.108Z,1509047685.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:45.510Z,1509047685.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-10-26T19:54:45.511Z,1509047685.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:45.916Z,1509047685.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-10-26T19:54:45.917Z,1509047685.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:46.313Z,1509047686.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-10-26T19:54:46.314Z,1509047686.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:46.701Z,1509047686.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-10-26T19:54:46.702Z,1509047686.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:47.112Z,1509047687.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-10-26T19:54:47.113Z,1509047687.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:47.513Z,1509047687.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-10-26T19:54:47.514Z,1509047687.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:47.910Z,1509047687.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-10-26T19:54:47.911Z,1509047687.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:48.312Z,1509047688.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-10-26T19:54:48.313Z,1509047688.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:48.740Z,1509047688.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-10-26T19:54:48.741Z,1509047688.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:49.096Z,1509047689.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-10-26T19:54:49.097Z,1509047689.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:49.522Z,1509047689.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-10-26T19:54:49.523Z,1509047689.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:49.947Z,1509047689.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:50.299Z,1509047690.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:50.729Z,1509047690.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:51.101Z,1509047691.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:51.537Z,1509047691.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:51.901Z,1509047691.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:52.343Z,1509047692.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:52.701Z,1509047692.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:53.104Z,1509047693.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:53.506Z,1509047693.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:53.905Z,1509047693.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:54.309Z,1509047694.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:54.706Z,1509047694.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:55.107Z,1509047695.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:55.502Z,1509047695.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:55.912Z,1509047695.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:56.308Z,1509047696.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:56.704Z,1509047696.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:57.102Z,1509047697.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:57.513Z,1509047697.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:57.906Z,1509047697.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:58.371Z,1509047698.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:58.709Z,1509047698.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:59.112Z,1509047699.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:59.514Z,1509047699.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:54:59.909Z,1509047699.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:00.320Z,1509047700.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:00.712Z,1509047700.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:01.120Z,1509047701.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:01.499Z,1509047701.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:01.919Z,1509047701.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:02.310Z,1509047702.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:02.703Z,1509047702.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:03.097Z,1509047703.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:03.499Z,1509047703.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:03.904Z,1509047703.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:04.362Z,1509047704.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:04.702Z,1509047704.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:05.139Z,1509047705.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:05.506Z,1509047705.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:05.951Z,1509047705.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:06.329Z,1509047706.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:06.708Z,1509047706.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:07.102Z,1509047707.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:07.502Z,1509047707.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:07.911Z,1509047707.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:08.304Z,1509047708.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:08.708Z,1509047708.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:09.103Z,1509047709.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:09.508Z,1509047709.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:09.910Z,1509047709.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:10.307Z,1509047710.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:10.709Z,1509047710.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:11.103Z,1509047711.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:11.505Z,1509047711.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:11.908Z,1509047711.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:12.308Z,1509047712.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:12.713Z,1509047712.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:13.118Z,1509047713.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:16.717Z,1509047716.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:16.834Z,1509047716.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:17.204Z,1509047717.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:17.604Z,1509047717.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:18.031Z,1509047718.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:18.444Z,1509047718.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:18.776Z,1509047718.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:19.240Z,1509047719.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:19.609Z,1509047719.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:20.015Z,1509047720.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:20.395Z,1509047720.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:20.822Z,1509047720.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:21.192Z,1509047721.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:21.594Z,1509047721.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:21.993Z,1509047721.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:22.393Z,1509047722.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:22.796Z,1509047722.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:23.195Z,1509047723.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:23.592Z,1509047723.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:23.986Z,1509047723.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:24.394Z,1509047724.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:24.793Z,1509047724.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:25.198Z,1509047725.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:25.600Z,1509047725.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:25.999Z,1509047725.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:26.402Z,1509047726.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:26.811Z,1509047726.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:27.208Z,1509047727.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:27.604Z,1509047727.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:28.007Z,1509047728.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:28.411Z,1509047728.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:28.810Z,1509047728.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:29.228Z,1509047729.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:29.621Z,1509047729.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:30.001Z,1509047730.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:30.398Z,1509047730.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:30.804Z,1509047730.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:31.201Z,1509047731.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:31.601Z,1509047731.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:32.005Z,1509047732.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:32.431Z,1509047732.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:32.921Z,1509047732.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:33.203Z,1509047733.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:33.647Z,1509047733.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:34.010Z,1509047734.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:34.448Z,1509047734.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:34.821Z,1509047734.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:35.202Z,1509047735.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:35.604Z,1509047735.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:36.011Z,1509047736.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:36.405Z,1509047736.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:36.784Z,1509047736.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:37.216Z,1509047737.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:37.594Z,1509047737.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:37.990Z,1509047737.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:38.400Z,1509047738.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:38.795Z,1509047738.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:39.191Z,1509047739.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:39.602Z,1509047739.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:39.993Z,1509047739.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:40.398Z,1509047740.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:40.799Z,1509047740.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:41.198Z,1509047741.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:41.596Z,1509047741.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:42.008Z,1509047742.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:42.397Z,1509047742.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:42.798Z,1509047742.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:43.199Z,1509047743.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:43.595Z,1509047743.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:43.999Z,1509047743.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:44.402Z,1509047744.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:44.804Z,1509047744.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:45.208Z,1509047745.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:45.637Z,1509047745.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:46.020Z,1509047746.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:46.399Z,1509047746.399 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T19:55:46.399Z,1509047746.399 [BPC1] Data Fault, FailCount= 1
2017-10-26T19:55:46.399Z,1509047746.399 [BPC1](ERROR): Data Fault
2017-10-26T19:55:46.408Z,1509047746.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:46.424Z,1509047746.424 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T19:55:46.783Z,1509047746.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:47.206Z,1509047747.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:47.610Z,1509047747.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:47.626Z,1509047747.626 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T19:55:47.626Z,1509047747.626 [BPC1] No Fault, FailCount= 1
2017-10-26T19:55:48.053Z,1509047748.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:48.409Z,1509047748.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:48.817Z,1509047748.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:49.250Z,1509047749.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:49.584Z,1509047749.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:50.011Z,1509047750.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:50.412Z,1509047750.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:50.847Z,1509047750.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:51.201Z,1509047751.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:51.604Z,1509047751.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:52.019Z,1509047752.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:52.385Z,1509047752.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:52.795Z,1509047752.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:53.194Z,1509047753.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:53.593Z,1509047753.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:53.994Z,1509047753.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:54.400Z,1509047754.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:54.808Z,1509047754.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:55.187Z,1509047755.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:55.598Z,1509047755.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:55.991Z,1509047755.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:56.398Z,1509047756.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:56.802Z,1509047756.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:57.196Z,1509047757.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:57.597Z,1509047757.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:58.001Z,1509047758.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:58.401Z,1509047758.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:58.799Z,1509047758.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:59.198Z,1509047759.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:59.608Z,1509047759.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:55:59.997Z,1509047759.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:00.401Z,1509047760.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:00.795Z,1509047760.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:01.246Z,1509047761.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:01.652Z,1509047761.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:02.027Z,1509047762.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:02.429Z,1509047762.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:02.806Z,1509047762.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:03.217Z,1509047763.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:03.647Z,1509047763.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:04.014Z,1509047764.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:04.409Z,1509047764.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:04.820Z,1509047764.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:05.215Z,1509047765.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:05.632Z,1509047765.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:05.979Z,1509047765.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:06.414Z,1509047766.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:06.816Z,1509047766.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:07.215Z,1509047767.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:07.610Z,1509047767.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:07.994Z,1509047767.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:08.404Z,1509047768.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:08.809Z,1509047768.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:09.202Z,1509047769.202 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:09.202Z,1509047769.202 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2017-10-26T19:56:09.203Z,1509047769.203 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T19:56:09.207Z,1509047769.207 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:09.207Z,1509047769.207 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-26T19:56:09.207Z,1509047769.207 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T19:56:09.228Z,1509047769.228 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T19:56:09.228Z,1509047769.228 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T19:56:09.635Z,1509047769.635 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T19:56:09.635Z,1509047769.635 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2017-10-26T19:56:09.636Z,1509047769.636 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T19:56:09.636Z,1509047769.636 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-26T19:56:09.992Z,1509047769.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T19:56:10.017Z,1509047770.017 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T19:56:10.017Z,1509047770.017 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T19:56:10.020Z,1509047770.020 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T19:56:10.020Z,1509047770.020 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T19:56:10.021Z,1509047770.021 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T19:56:10.391Z,1509047770.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-10-26T19:56:10.392Z,1509047770.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:10.810Z,1509047770.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-10-26T19:56:10.811Z,1509047770.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:11.216Z,1509047771.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-10-26T19:56:11.217Z,1509047771.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:11.590Z,1509047771.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-10-26T19:56:11.591Z,1509047771.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:11.988Z,1509047771.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-10-26T19:56:11.989Z,1509047771.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:12.419Z,1509047772.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-10-26T19:56:12.420Z,1509047772.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:12.426Z,1509047772.426 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-26T19:56:12.426Z,1509047772.426 [Default:CheckIn:C.Wait] Stopped
2017-10-26T19:56:12.426Z,1509047772.426 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-26T19:56:12.426Z,1509047772.426 [Default:CheckIn:D] Running Loop=1
2017-10-26T19:56:12.793Z,1509047772.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-10-26T19:56:12.794Z,1509047772.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:12.826Z,1509047772.826 [Default:CheckIn:D] Stopped
2017-10-26T19:56:12.826Z,1509047772.826 [Default:CheckIn:E] Running Loop=1
2017-10-26T19:56:13.194Z,1509047773.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-10-26T19:56:13.195Z,1509047773.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:13.202Z,1509047773.202 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 8.308389 min 
2017-10-26T19:56:13.204Z,1509047773.204 [Default:CheckIn:E] Stopped
2017-10-26T19:56:13.204Z,1509047773.204 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-26T19:56:13.204Z,1509047773.204 [Default:CheckIn] Stopped
2017-10-26T19:56:13.204Z,1509047773.204 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-26T19:56:13.204Z,1509047773.204 [Default:CheckIn](INFO): Running loop #2
2017-10-26T19:56:13.204Z,1509047773.204 [Default:CheckIn] Running Loop=2
2017-10-26T19:56:13.204Z,1509047773.204 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-26T19:56:13.204Z,1509047773.204 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-26T19:56:16.538Z,1509047776.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-10-26T19:56:16.539Z,1509047776.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:16.633Z,1509047776.633 [NAL9602](INFO): Powering up
2017-10-26T19:56:16.674Z,1509047776.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.5 s old, using for 20.0 s.
2017-10-26T19:56:16.679Z,1509047776.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:17.038Z,1509047777.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.8 s old, using for 20.0 s.
2017-10-26T19:56:17.040Z,1509047777.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:17.395Z,1509047777.395 [DataOverHttps](IMPORTANT): SBD MTMSN=20171026T195518
2017-10-26T19:56:17.484Z,1509047777.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.3 s old, using for 20.0 s.
2017-10-26T19:56:17.485Z,1509047777.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:17.837Z,1509047777.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.6 s old, using for 20.0 s.
2017-10-26T19:56:17.838Z,1509047777.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:18.276Z,1509047778.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.1 s old, using for 20.0 s.
2017-10-26T19:56:18.295Z,1509047778.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:21.558Z,1509047781.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-10-26T19:56:21.559Z,1509047781.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:21.637Z,1509047781.637 [DataOverHttps](INFO): Received command:sched asap "load Maintenance/new_tank_ballast_and_trim.xml;set ballast_and_trim.MissionTimeout 180 minute;set ballast_and_trim.Depth2 5 meter;set ballast_and_trim.DepthDeadband2 0.1 meter;set ballast_and_trim.MassEstimationError 0.5 millimeter" 3dwo0 1 2
2017-10-26T19:56:21.712Z,1509047781.712 [CommandLine](IMPORTANT): got command schedule asap "load Maintenance/new_tank_ballast_and_trim.xml;set ballast_and_trim.MissionTimeout 180 minute;set ballast_and_trim.Depth2 5 meter;set ballast_and_trim.DepthDeadband2 0.1 meter;set ballast_and_trim.MassEstimationError 0.5 millimeter" 3dwo0 1 2.000000
2017-10-26T19:56:21.713Z,1509047781.713 [CommandLine](IMPORTANT): Scheduling command #1 of 2 with id=3dwo0
2017-10-26T19:56:21.714Z,1509047781.714 [CommandLine](IMPORTANT): Scheduled #1 (#1 of 2 with id='3dwo0'): "load Maintenance/new_tank_ballast_and_trim.xml;set ballast_and_trim.MissionTimeout 180 minute;set ballast_and_trim.Depth2 5 meter;set ballast_and_trim.DepthDeadband2 0.1 meter;set ballast_and_trim.MassEstimationError 0.5 millimeter" ASAP
2017-10-26T19:56:21.716Z,1509047781.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.5 s old, using for 20.0 s.
2017-10-26T19:56:21.717Z,1509047781.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:22.080Z,1509047782.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.9 s old, using for 20.0 s.
2017-10-26T19:56:22.081Z,1509047782.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:22.398Z,1509047782.398 [DataOverHttps](IMPORTANT): SBD MTMSN=20171026T195523
2017-10-26T19:56:22.461Z,1509047782.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-10-26T19:56:22.462Z,1509047782.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:22.856Z,1509047782.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.7 s old, using for 20.0 s.
2017-10-26T19:56:22.857Z,1509047782.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:23.252Z,1509047783.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.1 s old, using for 20.0 s.
2017-10-26T19:56:23.257Z,1509047783.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:26.562Z,1509047786.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-10-26T19:56:26.563Z,1509047786.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:26.678Z,1509047786.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.5 s old, using for 20.0 s.
2017-10-26T19:56:26.679Z,1509047786.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:27.011Z,1509047787.011 [DataOverHttps](INFO): Received command:sched asap "set ballast_and_trim.BuoyEstimationError 20 cubic_centimeter;run " 3dwo0 2 2
2017-10-26T19:56:27.029Z,1509047787.029 [CommandLine](IMPORTANT): got command schedule asap "set ballast_and_trim.BuoyEstimationError 20 cubic_centimeter;run " 3dwo0 2 2.000000
2017-10-26T19:56:27.029Z,1509047787.029 [CommandLine](IMPORTANT): Scheduling command #2 of 2 with id=3dwo0
2017-10-26T19:56:27.030Z,1509047787.030 [CommandLine](IMPORTANT): Scheduled #2 (#2 of 2 with id='3dwo0'): "set ballast_and_trim.BuoyEstimationError 20 cubic_centimeter;run " ASAP
2017-10-26T19:56:27.094Z,1509047787.094 [CommandLine](IMPORTANT): got command load ./Missions/Maintenance/new_tank_ballast_and_trim.xml
2017-10-26T19:56:27.094Z,1509047787.094 [MissionManager](INFO): Loading Mission: ./Missions/Maintenance/new_tank_ballast_and_trim.xml
2017-10-26T19:56:27.136Z,1509047787.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.9 s old, using for 20.0 s.
2017-10-26T19:56:27.137Z,1509047787.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:27.235Z,1509047787.235 [MissionManager](INFO): DefineArg ballast_and_trim.MissionTimeout = 120.000000 min
2017-10-26T19:56:27.238Z,1509047787.238 [MissionManager](INFO): DefineArg ballast_and_trim.SkipComms = 0 bool
2017-10-26T19:56:27.241Z,1509047787.241 [MissionManager](INFO): DefineArg ballast_and_trim.Depth1 = 7.000000 m
2017-10-26T19:56:27.244Z,1509047787.244 [MissionManager](INFO): DefineArg ballast_and_trim.DepthDeadband1 = 0.100000 m
2017-10-26T19:56:27.247Z,1509047787.247 [MissionManager](INFO): DefineArg ballast_and_trim.Depth2 = nan m
2017-10-26T19:56:27.250Z,1509047787.250 [MissionManager](INFO): DefineArg ballast_and_trim.DepthDeadband2 = nan m
2017-10-26T19:56:27.253Z,1509047787.253 [MissionManager](INFO): DefineArg ballast_and_trim.SettleTime = 10.000000 min
2017-10-26T19:56:27.256Z,1509047787.256 [MissionManager](INFO): DefineArg ballast_and_trim.EstimationTimeout = 45.000000 min
2017-10-26T19:56:27.259Z,1509047787.259 [MissionManager](INFO): DefineArg ballast_and_trim.MinEstimationTime = 10.000000 min
2017-10-26T19:56:27.262Z,1509047787.262 [MissionManager](INFO): DefineArg ballast_and_trim.MassEstimationError = 0.250000 mm
2017-10-26T19:56:27.265Z,1509047787.265 [MissionManager](INFO): DefineArg ballast_and_trim.BuoyEstimationError = 15.000000 cc
2017-10-26T19:56:27.269Z,1509047787.269 [MissionManager](INFO): DefineArg ballast_and_trim.EstimationConfidence = 99.900000 %
2017-10-26T19:56:27.272Z,1509047787.272 [MissionManager](INFO): DefineArg ballast_and_trim.WaitToFloat = 5.000000 min
2017-10-26T19:56:27.272Z,1509047787.272 [MissionManager](INFO): Inserting Stack: Missions/Insert/Science.xml
2017-10-26T19:56:27.401Z,1509047787.401 [NAL9602](INFO): NAL9602 initialized
2017-10-26T19:56:27.442Z,1509047787.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-10-26T19:56:27.443Z,1509047787.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:27.555Z,1509047787.555 [MissionManager](INFO): DefineArg ballast_and_trim:Science.SampleISUS = 0 bool
2017-10-26T19:56:27.562Z,1509047787.562 [MissionManager](INFO): DefineArg ballast_and_trim:Science.SampleISUSmaxPitch = 60.000000 arcdeg
2017-10-26T19:56:27.574Z,1509047787.574 [MissionManager](INFO): DefineArg ballast_and_trim:Science.SampleISUSminPitch = -60.000000 arcdeg
2017-10-26T19:56:27.580Z,1509047787.580 [MissionManager](INFO): DefineArg ballast_and_trim:Science.PeakDetectChlActive = 0 bool
2017-10-26T19:56:27.583Z,1509047787.583 [MissionManager](INFO): DefineArg ballast_and_trim:Science.HighestChlPeakReportActive = 0 bool
2017-10-26T19:56:27.590Z,1509047787.590 [MissionManager](INFO): DefineArg ballast_and_trim:Science.PatchTracking = 0 bool
2017-10-26T19:56:27.593Z,1509047787.593 [MissionManager](INFO): DefineArg ballast_and_trim:Science.FilterWidthHorizontal = 3.000000 count
2017-10-26T19:56:27.613Z,1509047787.613 [MissionManager](INFO): DefineArg ballast_and_trim:Science.NumProfilesSlidingwindow = 100.000000 count
2017-10-26T19:56:27.616Z,1509047787.616 [MissionManager](INFO): DefineArg ballast_and_trim:Science.PeakDetectNO3Active = 0 bool
2017-10-26T19:56:27.618Z,1509047787.618 [MissionManager](INFO): DefineArg ballast_and_trim:Science.UpwardDerivativeOfTemperatureActive = 0 bool
2017-10-26T19:56:27.622Z,1509047787.622 [MissionManager](INFO): DefineArg ballast_and_trim:Science.EnabledAanderaaO2 = 1.000000 bool
2017-10-26T19:56:27.626Z,1509047787.626 [MissionManager](INFO): DefineArg ballast_and_trim:Science.EnabledNeilBrown = 0.000000 bool
2017-10-26T19:56:27.629Z,1509047787.629 [MissionManager](INFO): DefineArg ballast_and_trim:Science.EnabledSeabird = 1.000000 bool
2017-10-26T19:56:27.633Z,1509047787.633 [MissionManager](INFO): DefineArg ballast_and_trim:Science.EnabledTurbulence_NPS = 0.000000 bool
2017-10-26T19:56:27.660Z,1509047787.660 [MissionManager](INFO): DefineArg ballast_and_trim:Science.EnabledWetLabsBB2FL = 1.000000 bool
2017-10-26T19:56:27.664Z,1509047787.664 [MissionManager](INFO): DefineArg ballast_and_trim:Science.EnabledISUS = 0.000000 bool
2017-10-26T19:56:27.667Z,1509047787.667 [MissionManager](INFO): DefineArg ballast_and_trim:Science.LowPassWindowLength = 20.000000 count
2017-10-26T19:56:27.670Z,1509047787.670 [MissionManager](INFO): DefineArg ballast_and_trim:Science.PeakChlShallowBound = nan m
2017-10-26T19:56:27.673Z,1509047787.673 [MissionManager](INFO): DefineArg ballast_and_trim:Science.PeakChlDeepBound = nan m
2017-10-26T19:56:27.676Z,1509047787.676 [MissionManager](INFO): DefineOutput ballast_and_trim:Science.PeakChl = 0.000000 ug/l
2017-10-26T19:56:27.679Z,1509047787.679 [MissionManager](INFO): DefineOutput ballast_and_trim:Science.PeakChlDepth = 0.000000 m
2017-10-26T19:56:27.704Z,1509047787.704 [MissionManager](INFO): DefineOutput ballast_and_trim:Science.PeakChlLatitude = nan arcdeg
2017-10-26T19:56:27.723Z,1509047787.723 [MissionManager](INFO): DefineOutput ballast_and_trim:Science.PeakChlLongitude = nan arcdeg
2017-10-26T19:56:27.727Z,1509047787.727 [MissionManager](INFO): DefineOutput ballast_and_trim:Science.PeakNO3 = 0.000000 umol/l
2017-10-26T19:56:27.730Z,1509047787.730 [MissionManager](INFO): DefineOutput ballast_and_trim:Science.PeakNO3Depth = 0.000000 m
2017-10-26T19:56:27.752Z,1509047787.752 [MissionManager](INFO): DefineOutput ballast_and_trim:Science.PeakNO3Latitude = nan arcdeg
2017-10-26T19:56:27.755Z,1509047787.755 [MissionManager](INFO): DefineOutput ballast_and_trim:Science.PeakNO3Longitude = nan arcdeg
2017-10-26T19:56:27.758Z,1509047787.758 [MissionManager](INFO): DefineOutput ballast_and_trim:Science.PatchChl = 0.000000 m
2017-10-26T19:56:27.781Z,1509047787.781 [MissionManager](INFO): DefineOutput ballast_and_trim:Science.PatchChlDepth = 0.000000 m
2017-10-26T19:56:27.785Z,1509047787.785 [MissionManager](INFO): DefineOutput ballast_and_trim:Science.PatchChlLatitude = nan arcdeg
2017-10-26T19:56:27.829Z,1509047787.829 [MissionManager](INFO): DefineOutput ballast_and_trim:Science.PatchChlLongitude = nan arcdeg
2017-10-26T19:56:27.849Z,1509047787.849 [MissionManager](INFO): DefineOutput ballast_and_trim:Science.PatchChlDistance = nan arcdeg
2017-10-26T19:56:27.871Z,1509047787.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.7 s old, using for 20.0 s.
2017-10-26T19:56:27.881Z,1509047787.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:27.901Z,1509047787.901 [ballast_and_trim:Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2017-10-26T19:56:27.928Z,1509047787.928 [ballast_and_trim:Science:HighestChlPeakReport:A.PeakDetectHorizontal](DEBUG): Construct PeakDetectHorizontal.
2017-10-26T19:56:27.962Z,1509047787.962 [ballast_and_trim:Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Construct PeakDetectVsDepth.
2017-10-26T19:56:27.980Z,1509047787.980 [MissionManager](INFO): Inserting Stack: Missions/Insert/newBallastAndTrim.xml
2017-10-26T19:56:28.060Z,1509047788.060 [MissionManager](INFO): DefineArg ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim.InsertDepth = 25.000000 m
2017-10-26T19:56:28.075Z,1509047788.075 [MissionManager](INFO): DefineArg ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim.InsertDepthDeadband = 1.000000 m
2017-10-26T19:56:28.083Z,1509047788.083 [MissionManager](INFO): DefineArg ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim.InsertSettleTime = 10.000000 min
2017-10-26T19:56:28.086Z,1509047788.086 [MissionManager](INFO): DefineArg ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim.EstTimeout = 45.000000 min
2017-10-26T19:56:28.102Z,1509047788.102 [MissionManager](INFO): DefineArg ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim.MinEstTime = 10.000000 min
2017-10-26T19:56:28.109Z,1509047788.109 [MissionManager](INFO): DefineArg ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim.MassEstError = 0.250000 mm
2017-10-26T19:56:28.112Z,1509047788.112 [MissionManager](INFO): DefineArg ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim.BuoyEstError = 15.000000 cc
2017-10-26T19:56:28.120Z,1509047788.120 [MissionManager](INFO): DefineArg ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim.EstConfidence = 99.900000 %
2017-10-26T19:56:28.141Z,1509047788.141 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:E.SetSpeed](DEBUG): Construct.
2017-10-26T19:56:28.144Z,1509047788.144 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:F.Pitch](DEBUG): Construct.
2017-10-26T19:56:28.158Z,1509047788.158 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:G.Wait](DEBUG): Construct Wait.
2017-10-26T19:56:28.160Z,1509047788.160 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:H.](DEBUG): Construct BallastAndTrim.
2017-10-26T19:56:28.268Z,1509047788.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.1 s old, using for 20.0 s.
2017-10-26T19:56:28.274Z,1509047788.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:28.309Z,1509047788.309 [MissionManager](INFO): RedefineArg ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim.InsertDepth = reader:ballast_and_trim.Depth1
2017-10-26T19:56:28.311Z,1509047788.311 [MissionManager](INFO): RedefineArg ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim.InsertDepthDeadband = reader:ballast_and_trim.DepthDeadband1
2017-10-26T19:56:28.327Z,1509047788.327 [MissionManager](INFO): RedefineArg ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim.InsertSettleTime = reader:ballast_and_trim.SettleTime
2017-10-26T19:56:28.329Z,1509047788.329 [MissionManager](INFO): RedefineArg ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim.EstTimeout = reader:ballast_and_trim.EstimationTimeout
2017-10-26T19:56:28.330Z,1509047788.330 [MissionManager](INFO): RedefineArg ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim.MinEstTime = reader:ballast_and_trim.MinEstimationTime
2017-10-26T19:56:28.332Z,1509047788.332 [MissionManager](INFO): RedefineArg ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim.MassEstError = reader:ballast_and_trim.MassEstimationError
2017-10-26T19:56:28.334Z,1509047788.334 [MissionManager](INFO): RedefineArg ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim.BuoyEstError = reader:ballast_and_trim.BuoyEstimationError
2017-10-26T19:56:28.336Z,1509047788.336 [MissionManager](INFO): RedefineArg ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim.EstConfidence = reader:ballast_and_trim.EstimationConfidence
2017-10-26T19:56:28.357Z,1509047788.357 [MissionManager](INFO): Inserting Stack: Missions/Insert/newBallastAndTrim.xml
2017-10-26T19:56:28.417Z,1509047788.417 [MissionManager](INFO): DefineArg ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim.InsertDepth = 25.000000 m
2017-10-26T19:56:28.436Z,1509047788.436 [MissionManager](INFO): DefineArg ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim.InsertDepthDeadband = 1.000000 m
2017-10-26T19:56:28.439Z,1509047788.439 [MissionManager](INFO): DefineArg ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim.InsertSettleTime = 10.000000 min
2017-10-26T19:56:28.442Z,1509047788.442 [MissionManager](INFO): DefineArg ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim.EstTimeout = 45.000000 min
2017-10-26T19:56:28.454Z,1509047788.454 [MissionManager](INFO): DefineArg ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim.MinEstTime = 10.000000 min
2017-10-26T19:56:28.457Z,1509047788.457 [MissionManager](INFO): DefineArg ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim.MassEstError = 0.250000 mm
2017-10-26T19:56:28.460Z,1509047788.460 [MissionManager](INFO): DefineArg ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim.BuoyEstError = 15.000000 cc
2017-10-26T19:56:28.463Z,1509047788.463 [MissionManager](INFO): DefineArg ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim.EstConfidence = 99.900000 %
2017-10-26T19:56:28.492Z,1509047788.492 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:E.SetSpeed](DEBUG): Construct.
2017-10-26T19:56:28.495Z,1509047788.495 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:F.Pitch](DEBUG): Construct.
2017-10-26T19:56:28.500Z,1509047788.500 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:G.Wait](DEBUG): Construct Wait.
2017-10-26T19:56:28.502Z,1509047788.502 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:H.](DEBUG): Construct BallastAndTrim.
2017-10-26T19:56:28.518Z,1509047788.518 [MissionManager](INFO): RedefineArg ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim.InsertDepth = reader:ballast_and_trim.Depth2
2017-10-26T19:56:28.520Z,1509047788.520 [MissionManager](INFO): RedefineArg ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim.InsertDepthDeadband = reader:ballast_and_trim.DepthDeadband2
2017-10-26T19:56:28.530Z,1509047788.530 [MissionManager](INFO): RedefineArg ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim.InsertSettleTime = reader:ballast_and_trim.SettleTime
2017-10-26T19:56:28.531Z,1509047788.531 [MissionManager](INFO): RedefineArg ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim.EstTimeout = reader:ballast_and_trim.EstimationTimeout
2017-10-26T19:56:28.533Z,1509047788.533 [MissionManager](INFO): RedefineArg ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim.MinEstTime = reader:ballast_and_trim.MinEstimationTime
2017-10-26T19:56:28.535Z,1509047788.535 [MissionManager](INFO): RedefineArg ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim.MassEstError = reader:ballast_and_trim.MassEstimationError
2017-10-26T19:56:28.537Z,1509047788.537 [MissionManager](INFO): RedefineArg ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim.BuoyEstError = reader:ballast_and_trim.BuoyEstimationError
2017-10-26T19:56:28.539Z,1509047788.539 [MissionManager](INFO): RedefineArg ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim.EstConfidence = reader:ballast_and_trim.EstimationConfidence
2017-10-26T19:56:28.551Z,1509047788.551 [ballast_and_trim:Float_Up:A.Buoyancy](DEBUG): Construct Buoyancy.
2017-10-26T19:56:28.554Z,1509047788.554 [ballast_and_trim:Float_Up:B.Wait](DEBUG): Construct Wait.
2017-10-26T19:56:28.646Z,1509047788.646 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://okeanids.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://okeanids.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://okeanids.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://okeanids.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://okeanids.mbari.org/tethys/Xml/Universal.xsd"
       Id="ballast_and_trim">

    <DefineArg Name="MissionTimeout"><Description>
        Maximum duration of mission
    </Description><Units:minute/><Value>120</Value></DefineArg>

    <DefineArg Name="SkipComms"><Description>
        Skip communications at start of mission.
    </Description><False/></DefineArg>

    <DefineArg Name="Depth1"><Units:meter/><Value>7</Value></DefineArg>

    <DefineArg Name="DepthDeadband1"><Units:meter/><Value>0.1</Value></DefineArg>
    
    <DefineArg Name="Depth2"><Units:meter/><Value>NaN</Value></DefineArg>
    
    <DefineArg Name="DepthDeadband2"><Units:meter/><Value>NaN</Value></DefineArg>
    
    <DefineArg Name="SettleTime"><Description>
        How long to wait after reaching target depth before starting ballast and trim.
    </Description><Units:minute/><Value>10</Value></DefineArg>
    
    <DefineArg Name="EstimationTimeout"><Description>
        Timeout for ballast and trim estimation.
    </Description><Units:minute/><Value>45</Value></DefineArg>
    
    <DefineArg Name="MinEstimationTime"><Description>
        Minimum time to run ballast and trim estimation before determining convergence (must be shorter than timeout).
    </Description><Units:minute/><Value>10</Value></DefineArg>
    
    <DefineArg Name="MassEstimationError"><Description>
        Desired range of the estimated sample mean from the true mean statistic (smaller values take longer to converge).
    </Description><Units:millimeter/><Value>0.25</Value></DefineArg>
    
    <DefineArg Name="BuoyEstimationError"><Description>
        Desired range of the estimated sample mean from the true mean statistic (smaller values take longer to converge).
    </Description><Units:cubic_centimeter/><Value>15</Value></DefineArg>
    
    <DefineArg Name="EstimationConfidence"><Description>
        Confidence level that the estimator has reached the desired error range (larger values take longer to converge).
    </Description><Units:percent/><Value>99.9</Value></DefineArg>

    <DefineArg Name="WaitToFloat"><Units:minute/><Value>5</Value></DefineArg>

    <Timeout Duration="MissionTimeout"/>

    <Insert Filename="Insert/Science.xml"/>
    
    
    <Aggregate Id="RunBallastAndTrim">
    
        <Aggregate Id="Depth1">
            
            <Sequence/>
            
    <Break>
        <IsNaN><Arg Name="Depth1"/></IsNaN>
        <Or><IsNaN><Arg Name="DepthDeadband1"/></IsNaN></Or>
    </Break>
    
            <Insert Filename="Insert/newBallastAndTrim.xml">
                <RedefineArg Name="InsertDepth"><Arg Name="Depth1"/></RedefineArg>
                <RedefineArg Name="InsertDepthDeadband"><Arg Name="DepthDeadband1"/></RedefineArg>
                <RedefineArg Name="InsertSettleTime"><Arg Name="SettleTime"/></RedefineArg>
                <RedefineArg Name="EstTimeout"><Arg Name="EstimationTimeout"/></RedefineArg>
                <RedefineArg Name="MinEstTime"><Arg Name="MinEstimationTime"/></RedefineArg>
                <RedefineArg Name="MassEstError"><Arg Name="MassEstimationError"/></RedefineArg>
                <RedefineArg Name="BuoyEstError"><Arg Name="BuoyEstimationError"/></RedefineArg>
                <RedefineArg Name="EstConfidence"><Arg Name="EstimationConfidence"/></RedefineArg>
            </Insert>
            
        </Aggregate>
        
        <Aggregate Id="Depth2">
            
            <Sequence/>
            
    <Break>
        <IsNaN><Arg Name="Depth2"/></IsNaN>
        <Or><IsNaN><Arg Name="DepthDeadband2"/></IsNaN></Or>
    </Break>
            
            <Insert Filename="Insert/newBallastAndTrim.xml">
                <RedefineArg Name="InsertDepth"><Arg Name="Depth2"/></RedefineArg>
                <RedefineArg Name="InsertDepthDeadband"><Arg Name="DepthDeadband2"/></RedefineArg>
                <RedefineArg Name="InsertSettleTime"><Arg Name="SettleTime"/></RedefineArg>
                <RedefineArg Name="EstTimeout"><Arg Name="EstimationTimeout"/></RedefineArg>
                <RedefineArg Name="MinEstTime"><Arg Name="MinEstimationTime"/></RedefineArg>
                <RedefineArg Name="MassEstError"><Arg Name="MassEstimationError"/></RedefineArg>
                <RedefineArg Name="BuoyEstError"><Arg Name="BuoyEstimationError"/></RedefineArg>
                <RedefineArg Name="EstConfidence"><Arg Name="EstimationConfidence"/></RedefineArg>
            </Insert>
            
        </Aggregate>
    
    </Aggregate>
    
    
    <Aggregate Id="Float_Up">

        <Description>
            Float to surface instead of driving.
        </Description>

        <Sequence/>

        <Break>
            <Universal:depth/>
            <Lt><Control:VerticalControl.surfaceThreshold/></Lt>
        </Break>

        <Guidance:Buoyancy>
            <Parallel/>
            <Setting><Guidance:Buoyancy.position/><Control:VerticalControl.buoyancyDefault/></Setting>
        </Guidance:Buoyancy>

        <Guidance:Wait>
            <Sequence/>
            <Setting><Guidance:Wait.duration/><Arg Name="WaitToFloat"/></Setting>
        </Guidance:Wait>

    </Aggregate>

</Mission>


2017-10-26T19:56:28.646Z,1509047788.646 [CommandLine](IMPORTANT): Loaded ./Missions/Maintenance/new_tank_ballast_and_trim.xml
2017-10-26T19:56:28.688Z,1509047788.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.5 s old, using for 20.0 s.
2017-10-26T19:56:28.689Z,1509047788.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:29.057Z,1509047789.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.9 s old, using for 20.0 s.
2017-10-26T19:56:29.058Z,1509047789.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:29.513Z,1509047789.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:29.910Z,1509047789.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:30.361Z,1509047790.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:30.702Z,1509047790.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:31.119Z,1509047791.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:31.457Z,1509047791.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:31.903Z,1509047791.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:32.258Z,1509047792.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:32.634Z,1509047792.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:33.083Z,1509047793.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:33.531Z,1509047793.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:33.843Z,1509047793.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:34.246Z,1509047794.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:34.698Z,1509047794.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:35.078Z,1509047795.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:35.522Z,1509047795.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:35.895Z,1509047795.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:36.251Z,1509047796.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:36.685Z,1509047796.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:37.056Z,1509047797.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:37.466Z,1509047797.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:37.860Z,1509047797.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:38.259Z,1509047798.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:38.651Z,1509047798.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:39.058Z,1509047799.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:39.461Z,1509047799.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:39.836Z,1509047799.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:40.274Z,1509047800.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:40.655Z,1509047800.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:41.047Z,1509047801.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:41.445Z,1509047801.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:41.857Z,1509047801.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:42.238Z,1509047802.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:42.365Z,1509047802.365 [CommandLine](IMPORTANT): got command set ballast_and_trim.MissionTimeout 180.000000 minute
2017-10-26T19:56:42.366Z,1509047802.366 [CommandLine](IMPORTANT): got command set ballast_and_trim.Depth2 5.000000 meter
2017-10-26T19:56:42.367Z,1509047802.367 [CommandLine](IMPORTANT): got command set ballast_and_trim.DepthDeadband2 0.100000 meter
2017-10-26T19:56:42.368Z,1509047802.368 [CommandLine](IMPORTANT): got command set ballast_and_trim.MassEstimationError 0.500000 millimeter
2017-10-26T19:56:42.666Z,1509047802.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:43.051Z,1509047803.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:43.451Z,1509047803.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:43.859Z,1509047803.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:44.244Z,1509047804.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:44.656Z,1509047804.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:45.062Z,1509047805.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:45.345Z,1509047805.345 [CommandLine](IMPORTANT): got command set ballast_and_trim.BuoyEstimationError 20.000000 cubic_centimeter
2017-10-26T19:56:45.345Z,1509047805.345 [CommandLine](IMPORTANT): got command run 
2017-10-26T19:56:45.348Z,1509047805.348 [CommandLine](IMPORTANT): Running 
2017-10-26T19:56:45.441Z,1509047805.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:45.450Z,1509047805.450 [Default] Stopped
2017-10-26T19:56:45.450Z,1509047805.450 [Default](DEBUG): Aggregate::uninitialize Default
2017-10-26T19:56:45.450Z,1509047805.450 [Default:B.GoToSurface] Stopped
2017-10-26T19:56:45.450Z,1509047805.450 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2017-10-26T19:56:45.451Z,1509047805.451 [Default:CheckIn] Stopped
2017-10-26T19:56:45.451Z,1509047805.451 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-26T19:56:45.451Z,1509047805.451 [Default:CheckIn:Read_GPS] Stopped
2017-10-26T19:56:45.451Z,1509047805.451 [MissionManager](IMPORTANT): Started mission ballast_and_trim
2017-10-26T19:56:45.451Z,1509047805.451 [ballast_and_trim] Running Loop=1
2017-10-26T19:56:45.456Z,1509047805.456 [ballast_and_trim](DEBUG): Aggregate::initialize ballast_and_trim
2017-10-26T19:56:45.456Z,1509047805.456 [ballast_and_trim:Science] Running Loop=1
2017-10-26T19:56:45.456Z,1509047805.456 [ballast_and_trim:Science](DEBUG): Aggregate::initialize ballast_and_trim:Science
2017-10-26T19:56:45.456Z,1509047805.456 [ballast_and_trim:Science:A] Running Loop=1
2017-10-26T19:56:45.456Z,1509047805.456 [ballast_and_trim:Science:B] Running Loop=1
2017-10-26T19:56:45.456Z,1509047805.456 [ballast_and_trim:Science:C] Running Loop=1
2017-10-26T19:56:45.456Z,1509047805.456 [ballast_and_trim:Science:D] Running Loop=1
2017-10-26T19:56:45.456Z,1509047805.456 [ballast_and_trim:Science:E] Running Loop=1
2017-10-26T19:56:45.456Z,1509047805.456 [ballast_and_trim:Science:F] Running Loop=1
2017-10-26T19:56:45.456Z,1509047805.456 [ballast_and_trim:Science:PeakDetectChl] Running Loop=1
2017-10-26T19:56:45.456Z,1509047805.456 [ballast_and_trim:Science:PeakDetectChl](DEBUG): Aggregate::initialize ballast_and_trim:Science:PeakDetectChl
2017-10-26T19:56:45.457Z,1509047805.457 [ballast_and_trim:Science:PeakDetectChl:A.PeakDetectVsDepth] Running Loop=1
2017-10-26T19:56:45.457Z,1509047805.457 [ballast_and_trim:Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Initialize.
2017-10-26T19:56:45.461Z,1509047805.461 [ballast_and_trim:Science:HighestChlPeakReport] Running Loop=1
2017-10-26T19:56:45.461Z,1509047805.461 [ballast_and_trim:Science:HighestChlPeakReport](DEBUG): Aggregate::initialize ballast_and_trim:Science:HighestChlPeakReport
2017-10-26T19:56:45.461Z,1509047805.461 [ballast_and_trim:Science:HighestChlPeakReport:A.PeakDetectHorizontal] Running Loop=1
2017-10-26T19:56:45.461Z,1509047805.461 [ballast_and_trim:Science:HighestChlPeakReport:A.PeakDetectHorizontal](INFO): Initialize.
2017-10-26T19:56:45.462Z,1509047805.462 [ballast_and_trim:Science:PeakDetectNO3] Running Loop=1
2017-10-26T19:56:45.462Z,1509047805.462 [ballast_and_trim:Science:PeakDetectNO3](DEBUG): Aggregate::initialize ballast_and_trim:Science:PeakDetectNO3
2017-10-26T19:56:45.462Z,1509047805.462 [ballast_and_trim:Science:PeakDetectNO3:A.PeakDetectVsDepth] Running Loop=1
2017-10-26T19:56:45.462Z,1509047805.462 [ballast_and_trim:Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Initialize.
2017-10-26T19:56:45.464Z,1509047805.464 [ballast_and_trim:RunBallastAndTrim] Running Loop=1
2017-10-26T19:56:45.464Z,1509047805.464 [ballast_and_trim:RunBallastAndTrim](DEBUG): Aggregate::initialize ballast_and_trim:RunBallastAndTrim
2017-10-26T19:56:45.464Z,1509047805.464 [ballast_and_trim:RunBallastAndTrim:Depth1] Running Loop=1
2017-10-26T19:56:45.465Z,1509047805.465 [ballast_and_trim:RunBallastAndTrim:Depth1](DEBUG): Aggregate::initialize ballast_and_trim:RunBallastAndTrim:Depth1
2017-10-26T19:56:45.465Z,1509047805.465 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim] Running Loop=1
2017-10-26T19:56:45.465Z,1509047805.465 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim](DEBUG): Aggregate::initialize ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim
2017-10-26T19:56:45.465Z,1509047805.465 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:A] Running Loop=1
2017-10-26T19:56:45.465Z,1509047805.465 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:B] Running Loop=1
2017-10-26T19:56:45.465Z,1509047805.465 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:C] Running Loop=1
2017-10-26T19:56:45.465Z,1509047805.465 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:D] Running Loop=1
2017-10-26T19:56:45.465Z,1509047805.465 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:E.SetSpeed] Running Loop=1
2017-10-26T19:56:45.465Z,1509047805.465 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:E.SetSpeed](DEBUG): Initialize.
2017-10-26T19:56:45.465Z,1509047805.465 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:F.Pitch] Running Loop=1
2017-10-26T19:56:45.465Z,1509047805.465 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:F.Pitch](DEBUG): Initialize.
2017-10-26T19:56:45.505Z,1509047805.505 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:E.SetSpeed] Running Loop=1
2017-10-26T19:56:45.514Z,1509047805.514 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:D] Running Loop=1
2017-10-26T19:56:45.518Z,1509047805.518 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:C] Running Loop=1
2017-10-26T19:56:45.519Z,1509047805.519 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:B] Running Loop=1
2017-10-26T19:56:45.529Z,1509047805.529 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:A] Running Loop=1
2017-10-26T19:56:45.531Z,1509047805.531 [ballast_and_trim:Science] Running Loop=1
2017-10-26T19:56:45.540Z,1509047805.540 [ballast_and_trim:Science:PeakDetectNO3] Stopped
2017-10-26T19:56:45.540Z,1509047805.540 [ballast_and_trim:Science:PeakDetectNO3](DEBUG): Aggregate::uninitialize ballast_and_trim:Science:PeakDetectNO3
2017-10-26T19:56:45.540Z,1509047805.540 [ballast_and_trim:Science:PeakDetectNO3:A.PeakDetectVsDepth] Stopped
2017-10-26T19:56:45.540Z,1509047805.540 [ballast_and_trim:Science:PeakDetectNO3:A.PeakDetectVsDepth](DEBUG): Uninitialize.
2017-10-26T19:56:45.540Z,1509047805.540 [ballast_and_trim:Science:HighestChlPeakReport] Stopped
2017-10-26T19:56:45.540Z,1509047805.540 [ballast_and_trim:Science:HighestChlPeakReport](DEBUG): Aggregate::uninitialize ballast_and_trim:Science:HighestChlPeakReport
2017-10-26T19:56:45.540Z,1509047805.540 [ballast_and_trim:Science:HighestChlPeakReport:A.PeakDetectHorizontal] Stopped
2017-10-26T19:56:45.540Z,1509047805.540 [ballast_and_trim:Science:HighestChlPeakReport:A.PeakDetectHorizontal](DEBUG): Uninitialize.
2017-10-26T19:56:45.540Z,1509047805.540 [ballast_and_trim:Science:PeakDetectChl] Stopped
2017-10-26T19:56:45.541Z,1509047805.541 [ballast_and_trim:Science:PeakDetectChl](DEBUG): Aggregate::uninitialize ballast_and_trim:Science:PeakDetectChl
2017-10-26T19:56:45.541Z,1509047805.541 [ballast_and_trim:Science:PeakDetectChl:A.PeakDetectVsDepth] Stopped
2017-10-26T19:56:45.541Z,1509047805.541 [ballast_and_trim:Science:PeakDetectChl:A.PeakDetectVsDepth](DEBUG): Uninitialize.
2017-10-26T19:56:45.541Z,1509047805.541 [ballast_and_trim:Science:F] Running Loop=1
2017-10-26T19:56:45.542Z,1509047805.542 [ballast_and_trim:Science:F](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_chlorophyll_in_sea_water
2017-10-26T19:56:45.543Z,1509047805.543 [ballast_and_trim:Science:E] Stopped
2017-10-26T19:56:45.543Z,1509047805.543 [ballast_and_trim:Science:D] Stopped
2017-10-26T19:56:45.543Z,1509047805.543 [ballast_and_trim:Science:C] Running Loop=1
2017-10-26T19:56:45.545Z,1509047805.545 [ballast_and_trim:Science:C](DEBUG): Initialize ReadDataComponent to sense sea_water_temperature
2017-10-26T19:56:45.545Z,1509047805.545 [ballast_and_trim:Science:C](DEBUG): Initialize ReadDataComponent to sense sea_water_salinity
2017-10-26T19:56:45.547Z,1509047805.547 [ballast_and_trim:Science:B] Stopped
2017-10-26T19:56:45.547Z,1509047805.547 [ballast_and_trim:Science:A] Running Loop=1
2017-10-26T19:56:45.556Z,1509047805.556 [ballast_and_trim:Science:A](DEBUG): Initialize ReadDataComponent to sense mass_concentration_of_oxygen_in_sea_water
2017-10-26T19:56:45.636Z,1509047805.636 [CTD_Seabird](INFO): Initializing
2017-10-26T19:56:45.637Z,1509047805.637 [CTD_Seabird](INFO): Checking LCM
2017-10-26T19:56:45.637Z,1509047805.637 [CTD_Seabird](INFO): LCM OK
2017-10-26T19:56:45.637Z,1509047805.637 [CTD_Seabird](INFO): Powering up
2017-10-26T19:56:45.680Z,1509047805.680 [WetLabsBB2FL](INFO): Opening uart, block timeout 10ths=4
2017-10-26T19:56:45.680Z,1509047805.680 [WetLabsBB2FL](INFO): Powering up
2017-10-26T19:56:45.847Z,1509047805.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:46.239Z,1509047806.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:46.640Z,1509047806.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:47.044Z,1509047807.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:47.451Z,1509047807.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:47.918Z,1509047807.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:48.250Z,1509047808.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:48.649Z,1509047808.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:49.092Z,1509047809.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:49.451Z,1509047809.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:49.892Z,1509047809.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:50.286Z,1509047810.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:50.659Z,1509047810.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:50.976Z,1509047810.976 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-10-26T19:56:51.113Z,1509047811.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:51.136Z,1509047811.136 [CTD_Seabird](INFO): Started Seabird LCM interface with command:nohup ./lrauv-framework/onboard/bin/gpctd -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyC6 -b 9600 >& /dev/null &
2017-10-26T19:56:51.138Z,1509047811.138 [CTD_Seabird](INFO): LCM subscribed to channel:ctd_t.seabird-gpctd
2017-10-26T19:56:51.446Z,1509047811.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:51.852Z,1509047811.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:52.250Z,1509047812.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:52.648Z,1509047812.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:53.054Z,1509047813.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:53.395Z,1509047813.395 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	454		246.008		85.141		19.122		30.821		30.821		39.371		8.550		451.1		558.8		46.5	



2017-10-26T19:56:53.395Z,1509047813.395 [Aanderaa_O2](DEBUG): Error parsing device response
2017-10-26T19:56:53.478Z,1509047813.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:53.844Z,1509047813.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:54.284Z,1509047814.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:54.590Z,1509047814.590 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	454		246.298		85.232		19.116		30.810		30.810		39.362		8.552		450.8		558.2		46.7	


2017-10-26T19:56:54.590Z,1509047814.590 [Aanderaa_O2](DEBUG): Error parsing device response
2017-10-26T19:56:54.663Z,1509047814.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:55.055Z,1509047815.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:55.392Z,1509047815.392 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	454		246.442		85.275		19.112		30.805		30.805		39.351		8.546		450.5		557.7		46.8	


2017-10-26T19:56:55.392Z,1509047815.392 [Aanderaa_O2](DEBUG): Error parsing device response
2017-10-26T19:56:55.488Z,1509047815.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:55.866Z,1509047815.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:56.267Z,1509047816.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:56.639Z,1509047816.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:57.044Z,1509047817.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:57.481Z,1509047817.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:57.790Z,1509047817.790 [Aanderaa_O2](DEBUG): Error parsing data: 4831F	454		246.896		85.428		19.110		30.784		30.784		39.329		8.545		450.2		557.0		46.9	

2017-10-26T19:56:57.791Z,1509047817.791 [Aanderaa_O2](DEBUG): Error parsing device response
2017-10-26T19:56:57.851Z,1509047817.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:58.250Z,1509047818.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:58.789Z,1509047818.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:59.144Z,1509047819.144 [NAL9602](ERROR): Failed to receive proper response when querying signal strength for MT queue check.
2017-10-26T19:56:59.221Z,1509047819.221 [NAL9602](FAULT): received: 
+CSQ:0

OK51, 2, 0, 0, 0

OK
2017-10-26T19:56:59.221Z,1509047819.221 [NAL9602] Data Fault, FailCount= 1
2017-10-26T19:56:59.221Z,1509047819.221 [NAL9602](ERROR): Data Fault
2017-10-26T19:56:59.304Z,1509047819.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:59.444Z,1509047819.444 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-26T19:56:59.550Z,1509047819.550 [NAL9602](INFO): Powering down
2017-10-26T19:56:59.596Z,1509047819.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:56:59.983Z,1509047819.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:00.379Z,1509047820.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:00.560Z,1509047820.560 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-26T19:57:00.560Z,1509047820.560 [NAL9602] No Fault, FailCount= 1
2017-10-26T19:57:00.784Z,1509047820.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:01.191Z,1509047821.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:01.586Z,1509047821.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:01.998Z,1509047821.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:02.441Z,1509047822.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:02.802Z,1509047822.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:03.217Z,1509047823.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:03.605Z,1509047823.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:04.015Z,1509047824.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:04.420Z,1509047824.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:04.814Z,1509047824.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:05.196Z,1509047825.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:05.593Z,1509047825.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:05.990Z,1509047825.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:06.390Z,1509047826.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:06.791Z,1509047826.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:07.222Z,1509047827.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:07.588Z,1509047827.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:07.989Z,1509047827.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:08.387Z,1509047828.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:08.791Z,1509047828.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:09.228Z,1509047829.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:09.592Z,1509047829.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:09.993Z,1509047829.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:10.397Z,1509047830.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:10.788Z,1509047830.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:11.206Z,1509047831.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:11.607Z,1509047831.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:11.988Z,1509047831.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:12.388Z,1509047832.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:12.793Z,1509047832.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:13.216Z,1509047833.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:13.581Z,1509047833.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:13.987Z,1509047833.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:14.404Z,1509047834.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:14.795Z,1509047834.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:15.206Z,1509047835.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:15.597Z,1509047835.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:15.981Z,1509047835.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:16.422Z,1509047836.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:16.829Z,1509047836.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:17.223Z,1509047837.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:17.619Z,1509047837.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:17.986Z,1509047837.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:18.444Z,1509047838.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:18.830Z,1509047838.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:19.195Z,1509047839.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:19.595Z,1509047839.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:19.991Z,1509047839.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:20.395Z,1509047840.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:20.802Z,1509047840.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:21.241Z,1509047841.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:21.600Z,1509047841.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:22.037Z,1509047842.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:22.623Z,1509047842.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:23.011Z,1509047843.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:23.378Z,1509047843.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:27.301Z,1509047847.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:27.511Z,1509047847.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:27.906Z,1509047847.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:28.314Z,1509047848.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:28.698Z,1509047848.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:29.101Z,1509047849.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:29.496Z,1509047849.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:29.856Z,1509047849.856 [NAL9602](INFO): Powering up NAL9602
2017-10-26T19:57:29.902Z,1509047849.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:30.309Z,1509047850.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:30.726Z,1509047850.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:31.164Z,1509047851.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:31.507Z,1509047851.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:31.914Z,1509047851.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:32.307Z,1509047852.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:32.699Z,1509047852.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:33.112Z,1509047853.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:33.505Z,1509047853.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:33.895Z,1509047853.895 [BPC1](ERROR): Failed to receive battery data
2017-10-26T19:57:33.895Z,1509047853.895 [BPC1] Communications Fault, FailCount= 1
2017-10-26T19:57:33.895Z,1509047853.895 [BPC1](ERROR): Communications Fault
2017-10-26T19:57:33.916Z,1509047853.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:34.025Z,1509047854.025 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T19:57:34.307Z,1509047854.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:34.704Z,1509047854.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:35.088Z,1509047855.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:35.208Z,1509047855.208 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T19:57:35.208Z,1509047855.208 [BPC1] No Fault, FailCount= 1
2017-10-26T19:57:35.552Z,1509047855.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:35.900Z,1509047855.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:36.344Z,1509047856.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:36.708Z,1509047856.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:37.103Z,1509047857.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:37.519Z,1509047857.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:37.887Z,1509047857.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:38.301Z,1509047858.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:38.699Z,1509047858.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:39.099Z,1509047859.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:39.502Z,1509047859.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:39.903Z,1509047859.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:40.317Z,1509047860.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:40.652Z,1509047860.652 [NAL9602](INFO): NAL9602 initialized
2017-10-26T19:57:40.710Z,1509047860.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:41.085Z,1509047861.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:41.519Z,1509047861.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:41.914Z,1509047861.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:42.318Z,1509047862.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:42.701Z,1509047862.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:43.095Z,1509047863.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:43.501Z,1509047863.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:43.898Z,1509047863.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:44.319Z,1509047864.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:44.707Z,1509047864.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:45.112Z,1509047865.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:45.492Z,1509047865.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:45.889Z,1509047865.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:46.292Z,1509047866.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:46.745Z,1509047866.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:47.106Z,1509047867.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:47.507Z,1509047867.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:47.896Z,1509047867.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:48.344Z,1509047868.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:48.700Z,1509047868.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:49.117Z,1509047869.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:49.533Z,1509047869.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:49.926Z,1509047869.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:50.315Z,1509047870.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:50.702Z,1509047870.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:51.103Z,1509047871.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:51.494Z,1509047871.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:51.901Z,1509047871.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:52.299Z,1509047872.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:52.702Z,1509047872.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:53.096Z,1509047873.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:53.512Z,1509047873.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:53.906Z,1509047873.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:54.302Z,1509047874.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:54.701Z,1509047874.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:55.086Z,1509047875.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:55.519Z,1509047875.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:55.895Z,1509047875.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:56.296Z,1509047876.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:56.706Z,1509047876.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:57.101Z,1509047877.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:57.518Z,1509047877.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:57.911Z,1509047877.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:58.314Z,1509047878.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:58.704Z,1509047878.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:59.101Z,1509047879.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:59.507Z,1509047879.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:57:59.902Z,1509047879.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:00.331Z,1509047880.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:00.709Z,1509047880.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:01.128Z,1509047881.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:01.512Z,1509047881.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:01.920Z,1509047881.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:02.330Z,1509047882.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:02.699Z,1509047882.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:03.134Z,1509047883.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:03.509Z,1509047883.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:03.934Z,1509047883.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:04.300Z,1509047884.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:04.702Z,1509047884.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:05.103Z,1509047885.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:05.503Z,1509047885.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:06.064Z,1509047886.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:06.472Z,1509047886.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:06.877Z,1509047886.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:07.267Z,1509047887.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:07.682Z,1509047887.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:08.072Z,1509047888.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:08.479Z,1509047888.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:08.854Z,1509047888.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:09.261Z,1509047889.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:09.670Z,1509047889.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:10.070Z,1509047890.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:10.474Z,1509047890.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:10.865Z,1509047890.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:11.272Z,1509047891.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:11.620Z,1509047891.620 [NAL9602](INFO): Powering down
2017-10-26T19:58:11.681Z,1509047891.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:12.057Z,1509047892.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:12.477Z,1509047892.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:12.728Z,1509047892.728 [Radio_Surface](INFO): Powering down
2017-10-26T19:58:12.882Z,1509047892.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:13.265Z,1509047893.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:13.672Z,1509047893.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:14.067Z,1509047894.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:14.469Z,1509047894.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:14.886Z,1509047894.886 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T19:58:14.886Z,1509047894.886 [BPC1] Data Fault, FailCount= 1
2017-10-26T19:58:14.887Z,1509047894.887 [BPC1](ERROR): Data Fault
2017-10-26T19:58:14.921Z,1509047894.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:15.048Z,1509047895.048 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T19:58:15.261Z,1509047895.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:15.662Z,1509047895.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:16.061Z,1509047896.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:16.167Z,1509047896.167 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T19:58:16.168Z,1509047896.168 [BPC1] No Fault, FailCount= 1
2017-10-26T19:58:16.516Z,1509047896.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:16.873Z,1509047896.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:17.301Z,1509047897.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:17.670Z,1509047897.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:18.082Z,1509047898.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:18.470Z,1509047898.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:18.864Z,1509047898.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:19.272Z,1509047899.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:19.683Z,1509047899.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:20.061Z,1509047900.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:20.484Z,1509047900.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:20.871Z,1509047900.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:21.267Z,1509047901.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:21.808Z,1509047901.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:22.235Z,1509047902.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:22.626Z,1509047902.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:23.044Z,1509047903.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:23.417Z,1509047903.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:23.811Z,1509047903.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:24.225Z,1509047904.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:24.624Z,1509047904.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:25.020Z,1509047905.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:25.421Z,1509047905.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:25.806Z,1509047905.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:26.230Z,1509047906.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:26.611Z,1509047906.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:27.013Z,1509047907.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:27.414Z,1509047907.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:27.849Z,1509047907.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:28.254Z,1509047908.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:28.616Z,1509047908.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:29.022Z,1509047909.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:29.452Z,1509047909.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:29.830Z,1509047909.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:30.281Z,1509047910.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:30.662Z,1509047910.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:31.047Z,1509047911.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:31.430Z,1509047911.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:31.814Z,1509047911.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:32.240Z,1509047912.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:32.636Z,1509047912.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:33.015Z,1509047913.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:33.425Z,1509047913.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:33.828Z,1509047913.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:34.253Z,1509047914.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:34.653Z,1509047914.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:35.028Z,1509047915.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:35.418Z,1509047915.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:35.821Z,1509047915.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:36.389Z,1509047916.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:36.801Z,1509047916.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:37.214Z,1509047917.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:37.608Z,1509047917.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:37.981Z,1509047917.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:38.415Z,1509047918.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:38.779Z,1509047918.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:39.217Z,1509047919.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:39.600Z,1509047919.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:39.985Z,1509047919.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:40.397Z,1509047920.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:40.787Z,1509047920.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:41.216Z,1509047921.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:41.584Z,1509047921.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:42.019Z,1509047922.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:42.396Z,1509047922.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:42.779Z,1509047922.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:43.240Z,1509047923.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:43.583Z,1509047923.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:44.030Z,1509047924.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:44.419Z,1509047924.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:44.824Z,1509047924.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:45.256Z,1509047925.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:45.595Z,1509047925.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:45.993Z,1509047925.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:46.393Z,1509047926.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:46.783Z,1509047926.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:47.219Z,1509047927.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:47.582Z,1509047927.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:47.984Z,1509047927.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:48.387Z,1509047928.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:48.783Z,1509047928.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:49.211Z,1509047929.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:49.588Z,1509047929.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:49.972Z,1509047929.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:50.375Z,1509047930.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:50.809Z,1509047930.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:51.210Z,1509047931.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:51.586Z,1509047931.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:51.991Z,1509047931.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:52.392Z,1509047932.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:52.787Z,1509047932.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:53.139Z,1509047933.139 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T19:58:53.221Z,1509047933.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:53.589Z,1509047933.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:53.990Z,1509047933.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:54.389Z,1509047934.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:54.790Z,1509047934.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:55.220Z,1509047935.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:55.621Z,1509047935.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:55.980Z,1509047935.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:56.382Z,1509047936.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:56.784Z,1509047936.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:57.257Z,1509047937.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:57.613Z,1509047937.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:58.027Z,1509047938.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:58.390Z,1509047938.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:58.810Z,1509047938.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:59.216Z,1509047939.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:59.575Z,1509047939.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:58:59.987Z,1509047939.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:00.380Z,1509047940.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:00.783Z,1509047940.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:01.207Z,1509047941.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:01.583Z,1509047941.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:01.988Z,1509047941.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:02.386Z,1509047942.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:02.788Z,1509047942.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:03.223Z,1509047943.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:03.599Z,1509047943.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:04.003Z,1509047944.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:04.395Z,1509047944.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:04.793Z,1509047944.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:05.208Z,1509047945.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:05.576Z,1509047945.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:05.983Z,1509047945.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:06.378Z,1509047946.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:06.792Z,1509047946.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:07.222Z,1509047947.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:07.591Z,1509047947.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:07.989Z,1509047947.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:08.393Z,1509047948.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:08.801Z,1509047948.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:09.218Z,1509047949.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:09.576Z,1509047949.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:10.019Z,1509047950.019 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:10.019Z,1509047950.019 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 4
2017-10-26T19:59:10.019Z,1509047950.019 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T19:59:10.027Z,1509047950.027 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:10.028Z,1509047950.028 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-26T19:59:10.032Z,1509047950.032 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T19:59:10.126Z,1509047950.126 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T19:59:10.126Z,1509047950.126 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T19:59:10.507Z,1509047950.507 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T19:59:10.508Z,1509047950.508 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 4
2017-10-26T19:59:10.508Z,1509047950.508 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T19:59:10.508Z,1509047950.508 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-26T19:59:10.788Z,1509047950.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T19:59:10.789Z,1509047950.789 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T19:59:10.789Z,1509047950.789 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T19:59:10.793Z,1509047950.793 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T19:59:10.794Z,1509047950.794 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T19:59:10.794Z,1509047950.794 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T19:59:11.210Z,1509047951.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-10-26T19:59:11.211Z,1509047951.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:11.617Z,1509047951.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-10-26T19:59:11.618Z,1509047951.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:11.993Z,1509047951.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-10-26T19:59:11.994Z,1509047951.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:12.418Z,1509047952.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-10-26T19:59:12.419Z,1509047952.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:12.779Z,1509047952.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-10-26T19:59:12.796Z,1509047952.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:13.214Z,1509047953.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-10-26T19:59:13.215Z,1509047953.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:13.584Z,1509047953.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-10-26T19:59:13.585Z,1509047953.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:14.021Z,1509047954.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-10-26T19:59:14.021Z,1509047954.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:14.386Z,1509047954.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-10-26T19:59:14.387Z,1509047954.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:14.786Z,1509047954.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-10-26T19:59:14.787Z,1509047954.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:15.222Z,1509047955.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-10-26T19:59:15.223Z,1509047955.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:15.595Z,1509047955.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-10-26T19:59:15.596Z,1509047955.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:15.996Z,1509047955.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-10-26T19:59:15.997Z,1509047955.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:16.394Z,1509047956.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-10-26T19:59:16.395Z,1509047956.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:16.781Z,1509047956.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-10-26T19:59:16.787Z,1509047956.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:17.209Z,1509047957.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-10-26T19:59:17.210Z,1509047957.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:17.605Z,1509047957.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-10-26T19:59:17.606Z,1509047957.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:17.985Z,1509047957.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.0 s old, using for 20.0 s.
2017-10-26T19:59:17.986Z,1509047957.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:18.386Z,1509047958.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-10-26T19:59:18.387Z,1509047958.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:18.784Z,1509047958.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-10-26T19:59:18.785Z,1509047958.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:19.217Z,1509047959.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.2 s old, using for 20.0 s.
2017-10-26T19:59:19.218Z,1509047959.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:19.591Z,1509047959.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-10-26T19:59:19.592Z,1509047959.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:19.985Z,1509047959.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.0 s old, using for 20.0 s.
2017-10-26T19:59:19.986Z,1509047959.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:20.397Z,1509047960.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-10-26T19:59:20.398Z,1509047960.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:20.796Z,1509047960.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-10-26T19:59:20.797Z,1509047960.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:21.218Z,1509047961.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-10-26T19:59:21.220Z,1509047961.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:21.592Z,1509047961.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-10-26T19:59:21.593Z,1509047961.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:21.994Z,1509047961.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-10-26T19:59:21.995Z,1509047961.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:22.404Z,1509047962.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-10-26T19:59:22.405Z,1509047962.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:22.776Z,1509047962.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-10-26T19:59:22.777Z,1509047962.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:23.216Z,1509047963.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.2 s old, using for 20.0 s.
2017-10-26T19:59:23.217Z,1509047963.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:23.583Z,1509047963.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-10-26T19:59:23.584Z,1509047963.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:23.981Z,1509047963.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-10-26T19:59:23.982Z,1509047963.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:24.391Z,1509047964.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-10-26T19:59:24.392Z,1509047964.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:24.829Z,1509047964.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-10-26T19:59:24.830Z,1509047964.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:25.219Z,1509047965.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-10-26T19:59:25.220Z,1509047965.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:25.598Z,1509047965.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.6 s old, using for 20.0 s.
2017-10-26T19:59:25.599Z,1509047965.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:26.031Z,1509047966.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-10-26T19:59:26.032Z,1509047966.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:26.392Z,1509047966.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.4 s old, using for 20.0 s.
2017-10-26T19:59:26.394Z,1509047966.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:26.785Z,1509047966.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-10-26T19:59:26.787Z,1509047966.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:27.241Z,1509047967.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-10-26T19:59:27.242Z,1509047967.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:27.594Z,1509047967.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-10-26T19:59:27.595Z,1509047967.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:28.010Z,1509047968.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-10-26T19:59:28.011Z,1509047968.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:28.412Z,1509047968.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-10-26T19:59:28.413Z,1509047968.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:28.777Z,1509047968.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-10-26T19:59:28.778Z,1509047968.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:29.242Z,1509047969.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-10-26T19:59:29.243Z,1509047969.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:29.592Z,1509047969.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-10-26T19:59:29.593Z,1509047969.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:29.993Z,1509047969.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-10-26T19:59:29.994Z,1509047969.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:30.387Z,1509047970.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:30.789Z,1509047970.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:31.215Z,1509047971.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:31.593Z,1509047971.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:31.986Z,1509047971.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:32.392Z,1509047972.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:32.786Z,1509047972.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:33.207Z,1509047973.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:33.585Z,1509047973.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:33.983Z,1509047973.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:34.395Z,1509047974.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:34.795Z,1509047974.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:35.206Z,1509047975.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:35.599Z,1509047975.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:35.994Z,1509047975.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:36.383Z,1509047976.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:36.784Z,1509047976.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:37.221Z,1509047977.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:37.598Z,1509047977.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:37.984Z,1509047977.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:38.400Z,1509047978.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:38.785Z,1509047978.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:39.250Z,1509047979.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:39.795Z,1509047979.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:40.210Z,1509047980.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:40.577Z,1509047980.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:41.010Z,1509047981.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:41.407Z,1509047981.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:41.793Z,1509047981.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:42.219Z,1509047982.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:42.579Z,1509047982.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:42.954Z,1509047982.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:43.393Z,1509047983.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:43.800Z,1509047983.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:44.194Z,1509047984.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:44.582Z,1509047984.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:44.967Z,1509047984.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:45.378Z,1509047985.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:45.778Z,1509047985.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:46.152Z,1509047986.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:46.558Z,1509047986.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:46.968Z,1509047986.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:47.387Z,1509047987.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:47.766Z,1509047987.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:48.158Z,1509047988.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:48.576Z,1509047988.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:48.977Z,1509047988.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:49.366Z,1509047989.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:49.784Z,1509047989.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:50.151Z,1509047990.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:50.595Z,1509047990.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:50.995Z,1509047990.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:51.367Z,1509047991.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:51.794Z,1509047991.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:52.169Z,1509047992.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:52.598Z,1509047992.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:53.017Z,1509047993.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:53.042Z,1509047993.042 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:G.Wait] Running Loop=1
2017-10-26T19:59:53.042Z,1509047993.042 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:G.Wait](DEBUG): Initialize Wait Component.
2017-10-26T19:59:53.316Z,1509047993.316 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T19:59:53.358Z,1509047993.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:53.788Z,1509047993.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:54.239Z,1509047994.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:54.571Z,1509047994.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:54.978Z,1509047994.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:55.399Z,1509047995.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:55.770Z,1509047995.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:56.254Z,1509047996.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:56.601Z,1509047996.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:56.000Z,1509047997.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:57.373Z,1509047997.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:57.775Z,1509047997.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:58.282Z,1509047998.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:58.721Z,1509047998.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:59.099Z,1509047999.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:59.493Z,1509047999.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T19:59:59.897Z,1509047999.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:00.293Z,1509048000.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:00.716Z,1509048000.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:01.097Z,1509048001.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:01.502Z,1509048001.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:01.910Z,1509048001.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:02.328Z,1509048002.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:02.690Z,1509048002.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:03.093Z,1509048003.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:03.496Z,1509048003.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:03.896Z,1509048003.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:04.296Z,1509048004.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:04.700Z,1509048004.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:05.103Z,1509048005.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:05.502Z,1509048005.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:05.910Z,1509048005.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:06.286Z,1509048006.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:06.690Z,1509048006.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:07.094Z,1509048007.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:07.498Z,1509048007.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:07.904Z,1509048007.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:08.302Z,1509048008.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:08.738Z,1509048008.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:09.103Z,1509048009.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:09.542Z,1509048009.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:09.908Z,1509048009.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:10.336Z,1509048010.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:10.720Z,1509048010.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:11.093Z,1509048011.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:11.491Z,1509048011.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:11.903Z,1509048011.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:12.297Z,1509048012.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:12.704Z,1509048012.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:13.109Z,1509048013.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:13.500Z,1509048013.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:13.890Z,1509048013.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:14.308Z,1509048014.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:14.694Z,1509048014.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:15.100Z,1509048015.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:15.501Z,1509048015.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:15.906Z,1509048015.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:16.300Z,1509048016.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:16.701Z,1509048016.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:17.271Z,1509048017.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:17.672Z,1509048017.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:18.077Z,1509048018.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:18.466Z,1509048018.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:18.861Z,1509048018.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:19.250Z,1509048019.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:19.651Z,1509048019.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:20.086Z,1509048020.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:20.480Z,1509048020.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:20.858Z,1509048020.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:21.257Z,1509048021.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:21.666Z,1509048021.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:22.064Z,1509048022.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:22.474Z,1509048022.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:22.912Z,1509048022.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:23.276Z,1509048023.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:23.663Z,1509048023.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:24.096Z,1509048024.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:24.471Z,1509048024.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:24.894Z,1509048024.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:25.304Z,1509048025.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:25.660Z,1509048025.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:26.057Z,1509048026.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:26.463Z,1509048026.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:26.865Z,1509048026.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:27.279Z,1509048027.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:27.667Z,1509048027.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:28.068Z,1509048028.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:28.415Z,1509048028.415 [DataOverHttps](INFO): setting unavailable, lastComms_.elapsed()=180.157990
2017-10-26T20:00:28.467Z,1509048028.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:28.878Z,1509048028.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:29.275Z,1509048029.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:29.667Z,1509048029.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:30.079Z,1509048030.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:30.474Z,1509048030.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:30.852Z,1509048030.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:31.290Z,1509048031.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:31.671Z,1509048031.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:32.065Z,1509048032.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:32.474Z,1509048032.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:32.872Z,1509048032.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:33.280Z,1509048033.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:33.667Z,1509048033.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:34.067Z,1509048034.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:34.467Z,1509048034.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:34.867Z,1509048034.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:35.275Z,1509048035.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:35.694Z,1509048035.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:36.070Z,1509048036.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:36.474Z,1509048036.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:36.859Z,1509048036.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:37.306Z,1509048037.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:37.711Z,1509048037.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:38.070Z,1509048038.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:38.476Z,1509048038.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:38.885Z,1509048038.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:39.272Z,1509048039.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:39.694Z,1509048039.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:40.080Z,1509048040.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:40.496Z,1509048040.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:40.870Z,1509048040.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:41.316Z,1509048041.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:41.707Z,1509048041.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:42.082Z,1509048042.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:42.495Z,1509048042.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:42.915Z,1509048042.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:43.295Z,1509048043.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:43.690Z,1509048043.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:44.069Z,1509048044.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:44.499Z,1509048044.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:44.884Z,1509048044.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:45.279Z,1509048045.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:45.689Z,1509048045.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:46.095Z,1509048046.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:46.461Z,1509048046.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:46.866Z,1509048046.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:47.272Z,1509048047.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:47.671Z,1509048047.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:48.079Z,1509048048.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:48.465Z,1509048048.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:48.859Z,1509048048.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:49.265Z,1509048049.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:49.669Z,1509048049.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:50.068Z,1509048050.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:50.471Z,1509048050.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:50.871Z,1509048050.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:51.270Z,1509048051.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:51.678Z,1509048051.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:52.329Z,1509048052.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:52.648Z,1509048052.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:53.061Z,1509048053.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:53.446Z,1509048053.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:53.866Z,1509048053.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:54.276Z,1509048054.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:54.623Z,1509048054.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:55.031Z,1509048055.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:55.431Z,1509048055.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:55.833Z,1509048055.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:56.252Z,1509048056.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:56.635Z,1509048056.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:57.047Z,1509048057.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:57.438Z,1509048057.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:57.838Z,1509048057.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:58.253Z,1509048058.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:58.627Z,1509048058.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:59.052Z,1509048059.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:59.428Z,1509048059.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:00:59.609Z,1509048059.609 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:00:59.837Z,1509048059.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:00.243Z,1509048060.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:00.400Z,1509048060.400 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:00.636Z,1509048060.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:00.805Z,1509048060.805 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:01.033Z,1509048061.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:01.445Z,1509048061.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:01.598Z,1509048061.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:01.985Z,1509048061.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:02.003Z,1509048062.003 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:02.378Z,1509048062.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:02.603Z,1509048062.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:02.784Z,1509048062.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:03.215Z,1509048063.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:03.397Z,1509048063.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:03.585Z,1509048063.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:03.802Z,1509048063.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:03.989Z,1509048063.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:04.388Z,1509048064.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:04.594Z,1509048064.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:04.789Z,1509048064.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:04.999Z,1509048064.999 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:05.231Z,1509048065.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:05.594Z,1509048065.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:05.604Z,1509048065.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:06.019Z,1509048066.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:06.397Z,1509048066.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:06.408Z,1509048066.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:06.777Z,1509048066.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:06.802Z,1509048066.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:07.259Z,1509048067.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:07.583Z,1509048067.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:08.018Z,1509048068.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:08.419Z,1509048068.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:08.605Z,1509048068.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:08.798Z,1509048068.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:09.210Z,1509048069.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:09.398Z,1509048069.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:09.579Z,1509048069.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:09.803Z,1509048069.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:09.987Z,1509048069.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:10.388Z,1509048070.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:10.596Z,1509048070.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:10.782Z,1509048070.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:11.001Z,1509048071.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:11.220Z,1509048071.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:11.593Z,1509048071.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:11.605Z,1509048071.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:11.997Z,1509048071.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:12.392Z,1509048072.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:12.399Z,1509048072.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:12.795Z,1509048072.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:12.803Z,1509048072.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:13.196Z,1509048073.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:13.575Z,1509048073.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:13.596Z,1509048073.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:14.001Z,1509048074.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:14.146Z,1509048074.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:14.533Z,1509048074.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:14.612Z,1509048074.612 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:14.935Z,1509048074.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:15.341Z,1509048075.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:15.404Z,1509048075.404 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:15.755Z,1509048075.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:15.809Z,1509048075.809 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:16.147Z,1509048076.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:16.543Z,1509048076.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:16.601Z,1509048076.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:16.939Z,1509048076.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:17.006Z,1509048077.006 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:17.363Z,1509048077.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:17.603Z,1509048077.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:17.731Z,1509048077.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:18.155Z,1509048078.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:18.396Z,1509048078.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:18.541Z,1509048078.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:18.802Z,1509048078.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:18.941Z,1509048078.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:19.344Z,1509048079.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:19.594Z,1509048079.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:19.744Z,1509048079.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:19.998Z,1509048079.998 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:20.208Z,1509048080.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:20.574Z,1509048080.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:20.607Z,1509048080.607 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:20.931Z,1509048080.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:21.333Z,1509048081.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:21.401Z,1509048081.401 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:21.772Z,1509048081.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:21.805Z,1509048081.805 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:22.137Z,1509048082.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:22.582Z,1509048082.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:22.598Z,1509048082.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:22.985Z,1509048082.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:23.003Z,1509048083.003 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:23.343Z,1509048083.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:23.604Z,1509048083.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:23.738Z,1509048083.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:24.156Z,1509048084.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:24.397Z,1509048084.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:24.535Z,1509048084.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:24.802Z,1509048084.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:24.962Z,1509048084.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:25.358Z,1509048085.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:25.595Z,1509048085.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:25.735Z,1509048085.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:25.000Z,1509048086.000 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:26.144Z,1509048086.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:26.543Z,1509048086.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:26.605Z,1509048086.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:26.940Z,1509048086.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:27.352Z,1509048087.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:27.398Z,1509048087.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:27.751Z,1509048087.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:27.803Z,1509048087.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:28.129Z,1509048088.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:28.545Z,1509048088.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:28.597Z,1509048088.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:28.938Z,1509048088.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:29.004Z,1509048089.004 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:29.353Z,1509048089.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:29.605Z,1509048089.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:29.763Z,1509048089.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:30.142Z,1509048090.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:30.399Z,1509048090.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:30.548Z,1509048090.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:30.803Z,1509048090.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:30.950Z,1509048090.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:31.369Z,1509048091.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:31.739Z,1509048091.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:32.159Z,1509048092.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:32.541Z,1509048092.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:32.606Z,1509048092.606 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:32.944Z,1509048092.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:33.346Z,1509048093.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:33.399Z,1509048093.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:33.743Z,1509048093.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:33.804Z,1509048093.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:34.127Z,1509048094.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:34.539Z,1509048094.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:34.597Z,1509048094.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:34.937Z,1509048094.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:35.002Z,1509048095.002 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:35.431Z,1509048095.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:35.631Z,1509048095.631 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:35.750Z,1509048095.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:36.169Z,1509048096.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:36.424Z,1509048096.424 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:36.558Z,1509048096.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:36.828Z,1509048096.828 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:36.971Z,1509048096.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:37.382Z,1509048097.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:37.745Z,1509048097.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:38.141Z,1509048098.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:38.540Z,1509048098.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:38.942Z,1509048098.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:39.342Z,1509048099.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:39.597Z,1509048099.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:39.733Z,1509048099.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:40.001Z,1509048100.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:40.142Z,1509048100.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:40.549Z,1509048100.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:40.603Z,1509048100.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:40.935Z,1509048100.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:41.396Z,1509048101.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:41.465Z,1509048101.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:41.801Z,1509048101.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:41.842Z,1509048101.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:42.245Z,1509048102.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:42.593Z,1509048102.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:42.646Z,1509048102.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:42.998Z,1509048102.998 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:43.052Z,1509048103.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:43.449Z,1509048103.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:43.603Z,1509048103.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:43.854Z,1509048103.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:44.260Z,1509048104.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:44.397Z,1509048104.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:44.635Z,1509048104.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:44.801Z,1509048104.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:45.032Z,1509048105.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:45.437Z,1509048105.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:45.594Z,1509048105.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:45.846Z,1509048105.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:45.999Z,1509048105.999 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:46.249Z,1509048106.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:46.604Z,1509048106.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:46.665Z,1509048106.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:47.043Z,1509048107.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:47.401Z,1509048107.401 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:47.492Z,1509048107.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:47.805Z,1509048107.805 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:47.880Z,1509048107.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:48.257Z,1509048108.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:48.599Z,1509048108.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:48.668Z,1509048108.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:49.003Z,1509048109.003 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:49.046Z,1509048109.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:49.502Z,1509048109.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:49.605Z,1509048109.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:49.836Z,1509048109.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:50.255Z,1509048110.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:50.397Z,1509048110.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:50.681Z,1509048110.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:50.802Z,1509048110.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:51.050Z,1509048111.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:51.469Z,1509048111.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:51.595Z,1509048111.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:51.873Z,1509048111.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:52.000Z,1509048112.000 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:52.275Z,1509048112.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:52.605Z,1509048112.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:52.648Z,1509048112.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:53.028Z,1509048113.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:53.399Z,1509048113.399 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:01:53.403Z,1509048113.403 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:53.483Z,1509048113.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:53.807Z,1509048113.807 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:53.842Z,1509048113.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:54.242Z,1509048114.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:54.600Z,1509048114.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:54.655Z,1509048114.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:55.010Z,1509048115.010 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:55.048Z,1509048115.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:55.446Z,1509048115.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:55.606Z,1509048115.606 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:55.852Z,1509048115.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:56.251Z,1509048116.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:56.399Z,1509048116.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:56.652Z,1509048116.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:56.804Z,1509048116.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:57.054Z,1509048117.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:57.436Z,1509048117.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:57.597Z,1509048117.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:57.849Z,1509048117.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:58.001Z,1509048118.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:58.261Z,1509048118.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:58.602Z,1509048118.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:58.647Z,1509048118.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:59.042Z,1509048119.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:59.396Z,1509048119.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:59.458Z,1509048119.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:01:59.803Z,1509048119.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:01:59.866Z,1509048119.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:00.265Z,1509048120.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:00.593Z,1509048120.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:00.652Z,1509048120.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:00.998Z,1509048120.998 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:01.063Z,1509048121.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:01.436Z,1509048121.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:01.603Z,1509048121.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:01.835Z,1509048121.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:02.243Z,1509048122.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:02.396Z,1509048122.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:02.637Z,1509048122.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:02.801Z,1509048122.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:03.045Z,1509048123.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:03.452Z,1509048123.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:03.594Z,1509048123.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:03.923Z,1509048123.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:03.999Z,1509048123.999 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:04.329Z,1509048124.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:04.616Z,1509048124.616 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:04.642Z,1509048124.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:05.079Z,1509048125.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:05.410Z,1509048125.410 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:05.441Z,1509048125.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:05.814Z,1509048125.814 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:05.892Z,1509048125.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:06.291Z,1509048126.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:06.603Z,1509048126.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:06.631Z,1509048126.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:07.068Z,1509048127.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:07.397Z,1509048127.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:07.454Z,1509048127.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:07.800Z,1509048127.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:08.039Z,1509048128.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:08.402Z,1509048128.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:08.594Z,1509048128.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:08.836Z,1509048128.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:08.999Z,1509048128.999 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:09.254Z,1509048129.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:09.607Z,1509048129.607 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:09.615Z,1509048129.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:10.026Z,1509048130.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:10.401Z,1509048130.401 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:10.421Z,1509048130.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:10.806Z,1509048130.806 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:10.818Z,1509048130.818 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:10.818Z,1509048130.818 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 5
2017-10-26T20:02:10.819Z,1509048130.819 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:02:10.823Z,1509048130.823 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:10.823Z,1509048130.823 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 5
2017-10-26T20:02:10.823Z,1509048130.823 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:02:10.918Z,1509048130.918 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:02:10.919Z,1509048130.919 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:02:11.278Z,1509048131.278 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:02:11.279Z,1509048131.279 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 5
2017-10-26T20:02:11.279Z,1509048131.279 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:02:11.279Z,1509048131.279 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 5
2017-10-26T20:02:11.599Z,1509048131.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:11.612Z,1509048131.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:02:11.612Z,1509048131.612 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:02:11.612Z,1509048131.612 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:02:11.619Z,1509048131.619 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:02:11.620Z,1509048131.620 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:02:11.620Z,1509048131.620 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:02:12.003Z,1509048132.003 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:12.010Z,1509048132.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-10-26T20:02:12.011Z,1509048132.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:12.411Z,1509048132.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-10-26T20:02:12.412Z,1509048132.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:12.604Z,1509048132.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:12.813Z,1509048132.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-10-26T20:02:12.814Z,1509048132.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:13.231Z,1509048133.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-10-26T20:02:13.232Z,1509048133.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:13.397Z,1509048133.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:13.616Z,1509048133.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-10-26T20:02:13.621Z,1509048133.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:13.802Z,1509048133.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:14.019Z,1509048134.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-10-26T20:02:14.020Z,1509048134.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:14.495Z,1509048134.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.7 s old, using for 20.0 s.
2017-10-26T20:02:14.496Z,1509048134.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:14.595Z,1509048134.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:14.901Z,1509048134.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.1 s old, using for 20.0 s.
2017-10-26T20:02:14.902Z,1509048134.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:14.000Z,1509048135.000 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:15.302Z,1509048135.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.5 s old, using for 20.0 s.
2017-10-26T20:02:15.303Z,1509048135.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:15.605Z,1509048135.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:15.703Z,1509048135.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.9 s old, using for 20.0 s.
2017-10-26T20:02:15.704Z,1509048135.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:16.095Z,1509048136.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.3 s old, using for 20.0 s.
2017-10-26T20:02:16.096Z,1509048136.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:16.398Z,1509048136.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:16.502Z,1509048136.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.7 s old, using for 20.0 s.
2017-10-26T20:02:16.503Z,1509048136.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:16.803Z,1509048136.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:16.892Z,1509048136.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.1 s old, using for 20.0 s.
2017-10-26T20:02:16.893Z,1509048136.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:17.341Z,1509048137.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-10-26T20:02:17.342Z,1509048137.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:17.596Z,1509048137.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:17.701Z,1509048137.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-10-26T20:02:17.702Z,1509048137.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:18.001Z,1509048138.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:18.098Z,1509048138.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.3 s old, using for 20.0 s.
2017-10-26T20:02:18.099Z,1509048138.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:18.547Z,1509048138.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.7 s old, using for 20.0 s.
2017-10-26T20:02:18.548Z,1509048138.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:18.605Z,1509048138.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:18.900Z,1509048138.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-10-26T20:02:18.901Z,1509048138.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:19.308Z,1509048139.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.5 s old, using for 20.0 s.
2017-10-26T20:02:19.309Z,1509048139.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:19.399Z,1509048139.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:19.732Z,1509048139.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.9 s old, using for 20.0 s.
2017-10-26T20:02:19.733Z,1509048139.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:19.803Z,1509048139.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:20.087Z,1509048140.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-10-26T20:02:20.088Z,1509048140.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:20.541Z,1509048140.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.7 s old, using for 20.0 s.
2017-10-26T20:02:20.542Z,1509048140.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:20.596Z,1509048140.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:20.930Z,1509048140.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-10-26T20:02:20.931Z,1509048140.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:21.001Z,1509048141.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:21.326Z,1509048141.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.5 s old, using for 20.0 s.
2017-10-26T20:02:21.327Z,1509048141.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:21.602Z,1509048141.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:21.704Z,1509048141.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.9 s old, using for 20.0 s.
2017-10-26T20:02:21.705Z,1509048141.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:22.229Z,1509048142.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.4 s old, using for 20.0 s.
2017-10-26T20:02:22.230Z,1509048142.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:22.395Z,1509048142.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:22.604Z,1509048142.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.8 s old, using for 20.0 s.
2017-10-26T20:02:22.605Z,1509048142.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:22.800Z,1509048142.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:23.010Z,1509048143.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.2 s old, using for 20.0 s.
2017-10-26T20:02:23.011Z,1509048143.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:23.406Z,1509048143.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.6 s old, using for 20.0 s.
2017-10-26T20:02:23.407Z,1509048143.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:23.593Z,1509048143.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:23.808Z,1509048143.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.0 s old, using for 20.0 s.
2017-10-26T20:02:23.809Z,1509048143.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:23.998Z,1509048143.998 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:24.228Z,1509048144.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.4 s old, using for 20.0 s.
2017-10-26T20:02:24.229Z,1509048144.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:24.601Z,1509048144.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.8 s old, using for 20.0 s.
2017-10-26T20:02:24.603Z,1509048144.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:24.604Z,1509048144.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:25.018Z,1509048145.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.2 s old, using for 20.0 s.
2017-10-26T20:02:25.027Z,1509048145.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:25.396Z,1509048145.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:25.402Z,1509048145.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.6 s old, using for 20.0 s.
2017-10-26T20:02:25.403Z,1509048145.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:25.800Z,1509048145.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:25.804Z,1509048145.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.0 s old, using for 20.0 s.
2017-10-26T20:02:25.805Z,1509048145.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:26.219Z,1509048146.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.4 s old, using for 20.0 s.
2017-10-26T20:02:26.220Z,1509048146.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:26.594Z,1509048146.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:26.603Z,1509048146.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.8 s old, using for 20.0 s.
2017-10-26T20:02:26.604Z,1509048146.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:26.994Z,1509048146.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.2 s old, using for 20.0 s.
2017-10-26T20:02:26.995Z,1509048146.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:26.998Z,1509048146.998 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:27.406Z,1509048147.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.6 s old, using for 20.0 s.
2017-10-26T20:02:27.415Z,1509048147.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:27.603Z,1509048147.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:27.805Z,1509048147.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.0 s old, using for 20.0 s.
2017-10-26T20:02:27.806Z,1509048147.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:28.216Z,1509048148.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.4 s old, using for 20.0 s.
2017-10-26T20:02:28.217Z,1509048148.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:28.397Z,1509048148.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:28.606Z,1509048148.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.8 s old, using for 20.0 s.
2017-10-26T20:02:28.607Z,1509048148.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:28.801Z,1509048148.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:29.002Z,1509048149.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.2 s old, using for 20.0 s.
2017-10-26T20:02:29.003Z,1509048149.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:29.418Z,1509048149.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.6 s old, using for 20.0 s.
2017-10-26T20:02:29.419Z,1509048149.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:29.594Z,1509048149.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:29.796Z,1509048149.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.0 s old, using for 20.0 s.
2017-10-26T20:02:29.797Z,1509048149.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:29.999Z,1509048149.999 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:30.221Z,1509048150.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.4 s old, using for 20.0 s.
2017-10-26T20:02:30.223Z,1509048150.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:30.599Z,1509048150.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.8 s old, using for 20.0 s.
2017-10-26T20:02:30.600Z,1509048150.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:30.609Z,1509048150.609 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:30.998Z,1509048150.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:31.401Z,1509048151.401 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:31.414Z,1509048151.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:31.806Z,1509048151.806 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:31.866Z,1509048151.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:32.220Z,1509048152.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:32.599Z,1509048152.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:32.616Z,1509048152.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:33.004Z,1509048153.004 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:33.029Z,1509048153.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:33.414Z,1509048153.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:33.605Z,1509048153.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:33.827Z,1509048153.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:34.220Z,1509048154.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:34.398Z,1509048154.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:34.625Z,1509048154.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:34.804Z,1509048154.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:35.041Z,1509048155.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:35.392Z,1509048155.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:35.596Z,1509048155.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:35.798Z,1509048155.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:36.001Z,1509048156.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:36.222Z,1509048156.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:36.597Z,1509048156.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:36.605Z,1509048156.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:37.017Z,1509048157.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:37.399Z,1509048157.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:37.426Z,1509048157.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:37.803Z,1509048157.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:37.802Z,1509048157.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:38.223Z,1509048158.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:38.596Z,1509048158.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:38.602Z,1509048158.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:39.001Z,1509048159.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:39.008Z,1509048159.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:39.411Z,1509048159.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:39.631Z,1509048159.631 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:39.801Z,1509048159.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:40.225Z,1509048160.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:40.423Z,1509048160.423 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:40.605Z,1509048160.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:40.828Z,1509048160.828 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:41.024Z,1509048161.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:41.396Z,1509048161.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:41.605Z,1509048161.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:41.802Z,1509048161.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:42.218Z,1509048162.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:42.398Z,1509048162.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:42.623Z,1509048162.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:42.804Z,1509048162.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:43.021Z,1509048163.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:43.400Z,1509048163.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:43.596Z,1509048163.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:43.804Z,1509048163.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:44.001Z,1509048164.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:44.237Z,1509048164.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:44.603Z,1509048164.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:44.606Z,1509048164.606 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:45.004Z,1509048165.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:45.399Z,1509048165.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:45.420Z,1509048165.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:45.803Z,1509048165.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:45.830Z,1509048165.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:46.212Z,1509048166.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:46.593Z,1509048166.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:46.597Z,1509048166.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:47.001Z,1509048167.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:47.051Z,1509048167.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:47.405Z,1509048167.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:47.602Z,1509048167.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:47.825Z,1509048167.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:48.215Z,1509048168.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:48.396Z,1509048168.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:48.633Z,1509048168.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:48.800Z,1509048168.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:49.024Z,1509048169.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:49.389Z,1509048169.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:49.593Z,1509048169.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:49.817Z,1509048169.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:49.998Z,1509048169.998 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:50.224Z,1509048170.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:50.601Z,1509048170.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:50.603Z,1509048170.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:51.002Z,1509048171.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:51.396Z,1509048171.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:51.405Z,1509048171.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:51.801Z,1509048171.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:51.810Z,1509048171.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:52.228Z,1509048172.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:52.594Z,1509048172.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:52.602Z,1509048172.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:52.999Z,1509048172.999 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:53.006Z,1509048173.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:53.367Z,1509048173.367 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:02:53.423Z,1509048173.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:53.604Z,1509048173.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:53.804Z,1509048173.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:54.195Z,1509048174.195 [PNI_TCM](ERROR): CRC does not match. Expected:0x19974 got:0x11564
2017-10-26T20:02:54.224Z,1509048174.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:54.397Z,1509048174.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:54.597Z,1509048174.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:54.802Z,1509048174.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:55.005Z,1509048175.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:55.387Z,1509048175.387 [PNI_TCM](ERROR): CRC does not match. Expected:0x23400 got:0x25369
2017-10-26T20:02:55.431Z,1509048175.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:55.595Z,1509048175.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:55.808Z,1509048175.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:55.999Z,1509048175.999 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:56.215Z,1509048176.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:56.604Z,1509048176.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:56.605Z,1509048176.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:57.004Z,1509048177.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:57.398Z,1509048177.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:57.415Z,1509048177.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:57.802Z,1509048177.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:57.804Z,1509048177.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:58.217Z,1509048178.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:58.595Z,1509048178.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:58.601Z,1509048178.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:59.000Z,1509048179.000 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:59.015Z,1509048179.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:59.450Z,1509048179.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:02:59.605Z,1509048179.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:02:59.807Z,1509048179.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:00.202Z,1509048180.202 [PNI_TCM](ERROR): CRC does not match. Expected:0x64639 got:0x41
2017-10-26T20:03:00.243Z,1509048180.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:00.398Z,1509048180.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:00.604Z,1509048180.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:00.803Z,1509048180.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:01.034Z,1509048181.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:01.417Z,1509048181.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:01.596Z,1509048181.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:01.787Z,1509048181.787 [PNI_TCM](ERROR): CRC does not match. Expected:0x48771 got:0x1287
2017-10-26T20:03:01.827Z,1509048181.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:02.001Z,1509048182.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:02.261Z,1509048182.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:02.596Z,1509048182.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:02.606Z,1509048182.606 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:03.044Z,1509048183.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:03.399Z,1509048183.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:03.425Z,1509048183.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:03.804Z,1509048183.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:03.841Z,1509048183.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:04.352Z,1509048184.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:04.597Z,1509048184.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:04.749Z,1509048184.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:05.002Z,1509048185.002 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:05.152Z,1509048185.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:05.572Z,1509048185.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:05.602Z,1509048185.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:05.962Z,1509048185.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:06.340Z,1509048186.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:06.396Z,1509048186.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:06.751Z,1509048186.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:06.800Z,1509048186.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:07.148Z,1509048187.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:07.552Z,1509048187.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:07.593Z,1509048187.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:07.949Z,1509048187.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:07.999Z,1509048187.999 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:08.354Z,1509048188.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:08.603Z,1509048188.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:08.748Z,1509048188.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:09.165Z,1509048189.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:09.396Z,1509048189.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:09.569Z,1509048189.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:09.801Z,1509048189.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:09.962Z,1509048189.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:10.347Z,1509048190.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:10.594Z,1509048190.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:10.741Z,1509048190.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:10.999Z,1509048190.999 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:11.156Z,1509048191.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:11.553Z,1509048191.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:11.608Z,1509048191.608 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:11.960Z,1509048191.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:12.362Z,1509048192.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:12.401Z,1509048192.401 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:12.751Z,1509048192.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:12.805Z,1509048192.805 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:13.196Z,1509048193.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:13.558Z,1509048193.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:13.599Z,1509048193.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:13.938Z,1509048193.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:14.004Z,1509048194.004 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:14.385Z,1509048194.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:14.607Z,1509048194.607 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:14.754Z,1509048194.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:15.144Z,1509048195.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:15.397Z,1509048195.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:15.588Z,1509048195.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:15.802Z,1509048195.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:15.953Z,1509048195.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:16.390Z,1509048196.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:16.595Z,1509048196.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:16.750Z,1509048196.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:17.000Z,1509048197.000 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:17.206Z,1509048197.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:17.585Z,1509048197.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:17.606Z,1509048197.606 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:17.944Z,1509048197.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:18.356Z,1509048198.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:18.398Z,1509048198.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:18.752Z,1509048198.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:18.804Z,1509048198.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:19.164Z,1509048199.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:19.558Z,1509048199.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:19.596Z,1509048199.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:19.944Z,1509048199.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:20.001Z,1509048200.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:20.355Z,1509048200.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:20.601Z,1509048200.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:20.747Z,1509048200.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:21.154Z,1509048201.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:21.395Z,1509048201.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:21.711Z,1509048201.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:21.800Z,1509048201.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:22.105Z,1509048202.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:22.518Z,1509048202.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:22.593Z,1509048202.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:22.892Z,1509048202.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:22.997Z,1509048202.997 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:23.298Z,1509048203.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:23.602Z,1509048203.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:23.707Z,1509048203.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:24.101Z,1509048204.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:24.396Z,1509048204.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:24.505Z,1509048204.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:24.800Z,1509048204.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:24.907Z,1509048204.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:25.301Z,1509048205.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:25.593Z,1509048205.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:25.803Z,1509048205.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:25.998Z,1509048205.998 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:26.225Z,1509048206.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:26.603Z,1509048206.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:26.604Z,1509048206.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:27.010Z,1509048207.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:27.397Z,1509048207.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:27.436Z,1509048207.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:27.798Z,1509048207.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:27.801Z,1509048207.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:28.226Z,1509048208.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:28.594Z,1509048208.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:28.643Z,1509048208.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:28.998Z,1509048208.998 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:29.011Z,1509048209.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:29.427Z,1509048209.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:29.603Z,1509048209.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:29.822Z,1509048209.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:30.229Z,1509048210.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:30.397Z,1509048210.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:30.607Z,1509048210.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:30.801Z,1509048210.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:31.038Z,1509048211.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:31.427Z,1509048211.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:31.595Z,1509048211.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:31.834Z,1509048211.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:31.999Z,1509048211.999 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:32.254Z,1509048212.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:32.600Z,1509048212.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:32.604Z,1509048212.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:33.005Z,1509048213.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:33.397Z,1509048213.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:33.411Z,1509048213.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:33.802Z,1509048213.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:33.823Z,1509048213.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:34.219Z,1509048214.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:34.602Z,1509048214.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:34.740Z,1509048214.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:35.009Z,1509048215.009 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:35.132Z,1509048215.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:35.565Z,1509048215.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:35.605Z,1509048215.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:35.939Z,1509048215.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:36.344Z,1509048216.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:36.398Z,1509048216.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:36.723Z,1509048216.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:36.803Z,1509048216.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:37.126Z,1509048217.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:37.533Z,1509048217.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:37.601Z,1509048217.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:37.937Z,1509048217.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:38.005Z,1509048218.005 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:38.347Z,1509048218.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:38.606Z,1509048218.606 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:38.736Z,1509048218.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:39.134Z,1509048219.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:39.399Z,1509048219.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:39.535Z,1509048219.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:39.803Z,1509048219.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:39.936Z,1509048219.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:40.334Z,1509048220.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:40.597Z,1509048220.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:40.730Z,1509048220.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:41.001Z,1509048221.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:41.136Z,1509048221.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:41.538Z,1509048221.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:41.603Z,1509048221.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:41.925Z,1509048221.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:42.334Z,1509048222.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:42.395Z,1509048222.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:42.742Z,1509048222.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:42.800Z,1509048222.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:43.135Z,1509048223.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:43.583Z,1509048223.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:43.593Z,1509048223.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:43.968Z,1509048223.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:43.998Z,1509048223.998 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:44.338Z,1509048224.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:44.603Z,1509048224.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:44.751Z,1509048224.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:45.162Z,1509048225.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:45.396Z,1509048225.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:45.563Z,1509048225.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:45.801Z,1509048225.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:45.966Z,1509048225.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:46.377Z,1509048226.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:46.594Z,1509048226.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:46.932Z,1509048226.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:46.999Z,1509048226.999 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:47.340Z,1509048227.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:47.603Z,1509048227.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:47.747Z,1509048227.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:48.141Z,1509048228.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:48.397Z,1509048228.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:48.546Z,1509048228.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:48.801Z,1509048228.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:48.942Z,1509048228.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:49.338Z,1509048229.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:49.595Z,1509048229.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:49.746Z,1509048229.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:49.999Z,1509048229.999 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:50.150Z,1509048230.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:50.533Z,1509048230.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:50.604Z,1509048230.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:50.937Z,1509048230.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:51.330Z,1509048231.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:51.397Z,1509048231.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:51.740Z,1509048231.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:51.803Z,1509048231.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:52.143Z,1509048232.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:52.545Z,1509048232.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:52.599Z,1509048232.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:52.956Z,1509048232.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:53.004Z,1509048233.004 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:53.352Z,1509048233.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:53.605Z,1509048233.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:53.692Z,1509048233.692 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:03:53.727Z,1509048233.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:54.138Z,1509048234.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:54.398Z,1509048234.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:54.540Z,1509048234.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:54.804Z,1509048234.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:54.952Z,1509048234.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:55.343Z,1509048235.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:55.596Z,1509048235.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:55.743Z,1509048235.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:56.000Z,1509048236.000 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:56.143Z,1509048236.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:56.540Z,1509048236.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:56.606Z,1509048236.606 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:56.995Z,1509048236.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:57.327Z,1509048237.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:57.399Z,1509048237.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:57.734Z,1509048237.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:57.803Z,1509048237.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:58.136Z,1509048238.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:58.538Z,1509048238.538 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T20:03:58.538Z,1509048238.538 [BPC1] Data Fault, FailCount= 1
2017-10-26T20:03:58.538Z,1509048238.538 [BPC1](ERROR): Data Fault
2017-10-26T20:03:58.547Z,1509048238.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:58.597Z,1509048238.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:58.625Z,1509048238.625 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T20:03:58.939Z,1509048238.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:59.002Z,1509048239.002 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:59.340Z,1509048239.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:59.602Z,1509048239.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:03:59.751Z,1509048239.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:03:59.820Z,1509048239.820 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:03:59.820Z,1509048239.820 [BPC1] No Fault, FailCount= 1
2017-10-26T20:04:00.208Z,1509048240.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:00.395Z,1509048240.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:00.550Z,1509048240.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:00.800Z,1509048240.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:00.952Z,1509048240.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:01.383Z,1509048241.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:01.593Z,1509048241.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:01.735Z,1509048241.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:01.998Z,1509048241.998 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:02.331Z,1509048242.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:02.603Z,1509048242.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:02.738Z,1509048242.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:03.138Z,1509048243.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:03.396Z,1509048243.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:03.515Z,1509048243.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:03.800Z,1509048243.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:03.936Z,1509048243.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:04.344Z,1509048244.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:04.594Z,1509048244.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:04.710Z,1509048244.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:04.998Z,1509048244.998 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:05.121Z,1509048245.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:05.506Z,1509048245.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:05.619Z,1509048245.619 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:05.900Z,1509048245.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:06.311Z,1509048246.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:06.413Z,1509048246.413 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:06.713Z,1509048246.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:06.817Z,1509048246.817 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:07.112Z,1509048247.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:07.517Z,1509048247.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:07.607Z,1509048247.607 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:07.912Z,1509048247.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:08.304Z,1509048248.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:08.400Z,1509048248.400 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:08.710Z,1509048248.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:08.804Z,1509048248.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:09.115Z,1509048249.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:09.503Z,1509048249.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:09.597Z,1509048249.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:09.920Z,1509048249.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:10.002Z,1509048250.002 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:10.309Z,1509048250.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:10.603Z,1509048250.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:10.715Z,1509048250.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:11.114Z,1509048251.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:11.396Z,1509048251.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:11.518Z,1509048251.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:11.801Z,1509048251.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:11.899Z,1509048251.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:12.368Z,1509048252.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:12.594Z,1509048252.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:12.724Z,1509048252.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:12.999Z,1509048252.999 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:13.119Z,1509048253.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:13.531Z,1509048253.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:13.604Z,1509048253.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:13.907Z,1509048253.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:14.336Z,1509048254.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:14.397Z,1509048254.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:14.739Z,1509048254.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:14.803Z,1509048254.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:15.112Z,1509048255.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:15.589Z,1509048255.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:15.599Z,1509048255.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:15.945Z,1509048255.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:16.004Z,1509048256.004 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:16.325Z,1509048256.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:16.605Z,1509048256.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:16.723Z,1509048256.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:17.109Z,1509048257.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:17.398Z,1509048257.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:17.512Z,1509048257.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:17.802Z,1509048257.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:17.909Z,1509048257.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:18.316Z,1509048258.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:18.596Z,1509048258.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:18.723Z,1509048258.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:19.000Z,1509048259.000 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:19.123Z,1509048259.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:19.547Z,1509048259.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:19.606Z,1509048259.606 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:19.623Z,1509048259.623 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T20:04:19.920Z,1509048259.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:20.331Z,1509048260.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:20.398Z,1509048260.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:20.710Z,1509048260.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:20.803Z,1509048260.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:21.154Z,1509048261.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:21.515Z,1509048261.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:21.596Z,1509048261.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:21.905Z,1509048261.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:22.001Z,1509048262.001 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:22.322Z,1509048262.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:22.602Z,1509048262.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:22.709Z,1509048262.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:23.115Z,1509048263.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:23.395Z,1509048263.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:23.520Z,1509048263.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:23.800Z,1509048263.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:23.906Z,1509048263.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:24.302Z,1509048264.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:24.593Z,1509048264.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:24.710Z,1509048264.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:24.997Z,1509048264.997 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:25.108Z,1509048265.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:25.505Z,1509048265.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:25.635Z,1509048265.635 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:25.910Z,1509048265.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:26.319Z,1509048266.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:26.428Z,1509048266.428 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:26.745Z,1509048266.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:26.832Z,1509048266.832 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:27.118Z,1509048267.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:27.506Z,1509048267.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:27.601Z,1509048267.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:27.956Z,1509048267.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:28.310Z,1509048268.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:28.395Z,1509048268.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:28.712Z,1509048268.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:28.799Z,1509048268.799 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:29.154Z,1509048269.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:29.522Z,1509048269.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:29.593Z,1509048269.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:29.936Z,1509048269.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:29.997Z,1509048269.997 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:30.336Z,1509048270.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:30.464Z,1509048270.464 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-10-26T20:04:30.464Z,1509048270.464 [Rowe_600LCM] No Fault, FailCount= 5
2017-10-26T20:04:30.602Z,1509048270.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:30.618Z,1509048270.618 [Rowe_600LCM](INFO): Initializing
2017-10-26T20:04:30.618Z,1509048270.618 [Rowe_600LCM](INFO): Checking LCM
2017-10-26T20:04:30.618Z,1509048270.618 [Rowe_600LCM](INFO): LCM OK
2017-10-26T20:04:30.618Z,1509048270.618 [Rowe_600LCM](INFO): Powering up
2017-10-26T20:04:30.717Z,1509048270.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:31.101Z,1509048271.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:31.395Z,1509048271.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:31.514Z,1509048271.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:31.800Z,1509048271.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:31.917Z,1509048271.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:32.353Z,1509048272.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:32.593Z,1509048272.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:32.729Z,1509048272.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:32.998Z,1509048272.998 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:33.112Z,1509048273.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:33.540Z,1509048273.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:33.603Z,1509048273.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:33.904Z,1509048273.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:34.308Z,1509048274.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:34.396Z,1509048274.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:34.772Z,1509048274.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:34.801Z,1509048274.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:34.939Z,1509048274.939 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-10-26T20:04:35.028Z,1509048275.028 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-10-26T20:04:35.030Z,1509048275.030 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-10-26T20:04:35.031Z,1509048275.031 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-10-26T20:04:35.032Z,1509048275.032 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-10-26T20:04:35.162Z,1509048275.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:35.520Z,1509048275.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:35.595Z,1509048275.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:35.913Z,1509048275.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:36.357Z,1509048276.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:36.391Z,1509048276.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:36.714Z,1509048276.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:37.119Z,1509048277.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:37.189Z,1509048277.189 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:37.531Z,1509048277.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:37.607Z,1509048277.607 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:38.022Z,1509048278.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:38.398Z,1509048278.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:38.436Z,1509048278.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:38.817Z,1509048278.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:39.197Z,1509048279.197 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:39.254Z,1509048279.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:39.604Z,1509048279.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:39.621Z,1509048279.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:40.014Z,1509048280.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:40.398Z,1509048280.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:40.418Z,1509048280.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:40.824Z,1509048280.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:41.195Z,1509048281.195 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:41.261Z,1509048281.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:41.615Z,1509048281.615 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:41.640Z,1509048281.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:42.208Z,1509048282.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:42.412Z,1509048282.412 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:42.439Z,1509048282.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:42.843Z,1509048282.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:43.210Z,1509048283.210 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:43.227Z,1509048283.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:43.614Z,1509048283.614 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:43.660Z,1509048283.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:44.019Z,1509048284.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:44.408Z,1509048284.408 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:44.450Z,1509048284.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:44.871Z,1509048284.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:45.206Z,1509048285.206 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:45.237Z,1509048285.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:45.609Z,1509048285.609 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:45.617Z,1509048285.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:46.028Z,1509048286.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:46.399Z,1509048286.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:46.415Z,1509048286.415 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:46.820Z,1509048286.820 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:46.840Z,1509048286.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:47.242Z,1509048287.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:47.452Z,1509048287.452 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:47.609Z,1509048287.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:48.012Z,1509048288.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:48.250Z,1509048288.250 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:48.416Z,1509048288.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:48.654Z,1509048288.654 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:48.816Z,1509048288.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:49.229Z,1509048289.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:49.411Z,1509048289.411 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:49.621Z,1509048289.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:50.021Z,1509048290.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:50.209Z,1509048290.209 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:50.418Z,1509048290.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:50.613Z,1509048290.613 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:50.804Z,1509048290.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:51.236Z,1509048291.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:51.406Z,1509048291.406 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:51.618Z,1509048291.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:51.811Z,1509048291.811 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:52.019Z,1509048292.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:52.423Z,1509048292.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:52.604Z,1509048292.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:52.823Z,1509048292.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:53.240Z,1509048293.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:53.398Z,1509048293.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:53.622Z,1509048293.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:53.805Z,1509048293.805 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:53.975Z,1509048293.975 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:04:54.042Z,1509048294.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:54.416Z,1509048294.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:54.599Z,1509048294.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:54.818Z,1509048294.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:55.244Z,1509048295.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:55.397Z,1509048295.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:55.614Z,1509048295.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:55.801Z,1509048295.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:56.016Z,1509048296.016 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T20:04:56.016Z,1509048296.016 [BPC1] Data Fault, FailCount= 1
2017-10-26T20:04:56.017Z,1509048296.017 [BPC1](ERROR): Data Fault
2017-10-26T20:04:56.029Z,1509048296.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:56.165Z,1509048296.165 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T20:04:56.421Z,1509048296.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:56.599Z,1509048296.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:56.822Z,1509048296.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:57.247Z,1509048297.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:57.309Z,1509048297.309 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:04:57.309Z,1509048297.309 [BPC1] No Fault, FailCount= 1
2017-10-26T20:04:57.396Z,1509048297.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:57.682Z,1509048297.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:57.800Z,1509048297.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:58.016Z,1509048298.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:58.451Z,1509048298.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:58.594Z,1509048298.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:58.822Z,1509048298.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:59.257Z,1509048299.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:59.391Z,1509048299.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:04:59.618Z,1509048299.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:04:59.795Z,1509048299.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:00.018Z,1509048300.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:00.422Z,1509048300.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:00.589Z,1509048300.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:00.818Z,1509048300.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:01.231Z,1509048301.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:01.387Z,1509048301.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:01.628Z,1509048301.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:01.794Z,1509048301.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:02.013Z,1509048302.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:02.408Z,1509048302.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:02.592Z,1509048302.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:02.997Z,1509048302.997 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:03.061Z,1509048303.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:03.411Z,1509048303.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:03.469Z,1509048303.469 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:03.787Z,1509048303.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:04.220Z,1509048304.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:04.267Z,1509048304.267 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:04.620Z,1509048304.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:04.671Z,1509048304.671 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:05.048Z,1509048305.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:05.402Z,1509048305.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:05.444Z,1509048305.444 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:05.778Z,1509048305.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:06.229Z,1509048306.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:06.242Z,1509048306.242 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:06.588Z,1509048306.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:06.646Z,1509048306.646 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:07.075Z,1509048307.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:07.412Z,1509048307.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:07.439Z,1509048307.439 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:07.803Z,1509048307.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:07.844Z,1509048307.844 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:08.215Z,1509048308.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:08.594Z,1509048308.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:08.634Z,1509048308.634 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:09.032Z,1509048309.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:09.417Z,1509048309.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:09.427Z,1509048309.427 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:09.797Z,1509048309.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:09.831Z,1509048309.831 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:10.291Z,1509048310.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:10.595Z,1509048310.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:10.605Z,1509048310.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:11.080Z,1509048311.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:11.398Z,1509048311.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:11.414Z,1509048311.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:11.800Z,1509048311.800 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:11.800Z,1509048311.800 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 6
2017-10-26T20:05:11.801Z,1509048311.801 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:05:11.802Z,1509048311.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:11.806Z,1509048311.806 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:11.806Z,1509048311.806 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 6
2017-10-26T20:05:11.806Z,1509048311.806 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:05:11.899Z,1509048311.899 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:05:11.899Z,1509048311.899 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:05:12.355Z,1509048312.355 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:05:12.356Z,1509048312.356 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 6
2017-10-26T20:05:12.356Z,1509048312.356 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:05:12.356Z,1509048312.356 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 6
2017-10-26T20:05:12.595Z,1509048312.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:12.609Z,1509048312.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:05:12.609Z,1509048312.609 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:05:12.610Z,1509048312.610 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:05:12.612Z,1509048312.612 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:05:12.613Z,1509048312.613 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:05:12.613Z,1509048312.613 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:05:13.050Z,1509048313.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:13.395Z,1509048313.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:13.397Z,1509048313.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:13.801Z,1509048313.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:13.804Z,1509048313.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:14.224Z,1509048314.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:14.595Z,1509048314.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:14.598Z,1509048314.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:15.031Z,1509048315.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:15.396Z,1509048315.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:15.406Z,1509048315.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:15.800Z,1509048315.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:15.807Z,1509048315.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:16.211Z,1509048316.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:16.594Z,1509048316.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:16.601Z,1509048316.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:17.070Z,1509048317.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:17.391Z,1509048317.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:17.410Z,1509048317.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:17.794Z,1509048317.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:17.796Z,1509048317.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:18.210Z,1509048318.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:18.579Z,1509048318.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:18.593Z,1509048318.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:19.052Z,1509048319.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:19.399Z,1509048319.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:19.426Z,1509048319.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:19.803Z,1509048319.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:19.814Z,1509048319.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:20.224Z,1509048320.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:20.596Z,1509048320.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:20.599Z,1509048320.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:21.052Z,1509048321.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:21.394Z,1509048321.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:21.406Z,1509048321.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:21.791Z,1509048321.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:21.798Z,1509048321.798 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:22.221Z,1509048322.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:22.592Z,1509048322.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:22.595Z,1509048322.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:23.074Z,1509048323.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:23.378Z,1509048323.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:23.392Z,1509048323.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:23.797Z,1509048323.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:23.799Z,1509048323.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:24.295Z,1509048324.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:24.590Z,1509048324.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:24.596Z,1509048324.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:25.073Z,1509048325.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:25.391Z,1509048325.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:25.408Z,1509048325.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:25.796Z,1509048325.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:25.825Z,1509048325.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:26.243Z,1509048326.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:26.589Z,1509048326.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:26.591Z,1509048326.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:27.007Z,1509048327.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:27.386Z,1509048327.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:27.391Z,1509048327.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:27.787Z,1509048327.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:27.795Z,1509048327.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:28.216Z,1509048328.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:28.592Z,1509048328.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:28.611Z,1509048328.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:28.990Z,1509048328.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:29.384Z,1509048329.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:29.389Z,1509048329.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:29.778Z,1509048329.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:29.794Z,1509048329.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:30.209Z,1509048330.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:30.588Z,1509048330.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:30.622Z,1509048330.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:30.986Z,1509048330.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:30.992Z,1509048330.992 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:31.389Z,1509048331.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:31.601Z,1509048331.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:31.819Z,1509048331.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:32.224Z,1509048332.224 [PNI_TCM](ERROR): CRC does not match. Expected:0x9124 got:0x1857
2017-10-26T20:05:32.245Z,1509048332.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:32.394Z,1509048332.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:32.600Z,1509048332.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:32.989Z,1509048332.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:33.192Z,1509048333.192 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:33.403Z,1509048333.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:33.605Z,1509048333.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:33.801Z,1509048333.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:34.221Z,1509048334.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:34.397Z,1509048334.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:34.592Z,1509048334.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:35.053Z,1509048335.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:35.195Z,1509048335.195 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:35.422Z,1509048335.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:35.599Z,1509048335.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:35.778Z,1509048335.778 [PNI_TCM](ERROR): CRC does not match. Expected:0x7479 got:0x53535
2017-10-26T20:05:35.822Z,1509048335.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:36.219Z,1509048336.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:36.396Z,1509048336.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:36.600Z,1509048336.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:36.801Z,1509048336.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:37.044Z,1509048337.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:37.378Z,1509048337.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:37.454Z,1509048337.454 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:37.933Z,1509048337.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:38.251Z,1509048338.251 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:38.418Z,1509048338.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:38.660Z,1509048338.660 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:38.742Z,1509048338.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:39.211Z,1509048339.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:39.433Z,1509048339.433 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:39.535Z,1509048339.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:39.972Z,1509048339.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:40.230Z,1509048340.230 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:40.376Z,1509048340.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:40.635Z,1509048340.635 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:40.735Z,1509048340.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:41.216Z,1509048341.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:41.428Z,1509048341.428 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:41.534Z,1509048341.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:41.833Z,1509048341.833 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:41.942Z,1509048341.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:42.338Z,1509048342.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:42.602Z,1509048342.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:42.730Z,1509048342.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:43.135Z,1509048343.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:43.395Z,1509048343.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:43.555Z,1509048343.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:43.800Z,1509048343.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:43.954Z,1509048343.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:44.331Z,1509048344.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:44.593Z,1509048344.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:44.733Z,1509048344.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:45.134Z,1509048345.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:45.390Z,1509048345.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:45.597Z,1509048345.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:45.936Z,1509048345.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:45.987Z,1509048345.987 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:46.334Z,1509048346.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:46.604Z,1509048346.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:46.725Z,1509048346.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:47.130Z,1509048347.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:47.397Z,1509048347.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:47.614Z,1509048347.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:47.958Z,1509048347.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:47.998Z,1509048347.998 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:48.335Z,1509048348.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:48.603Z,1509048348.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:48.727Z,1509048348.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:49.146Z,1509048349.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:49.400Z,1509048349.400 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:49.523Z,1509048349.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:49.805Z,1509048349.805 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:49.947Z,1509048349.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:50.322Z,1509048350.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:50.598Z,1509048350.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:50.736Z,1509048350.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:51.140Z,1509048351.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:51.400Z,1509048351.400 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:51.537Z,1509048351.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:51.804Z,1509048351.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:51.946Z,1509048351.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:52.479Z,1509048352.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:52.598Z,1509048352.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:52.814Z,1509048352.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:53.254Z,1509048353.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:53.395Z,1509048353.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:53.665Z,1509048353.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:53.799Z,1509048353.799 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:54.026Z,1509048354.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:54.368Z,1509048354.368 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:05:54.462Z,1509048354.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:54.596Z,1509048354.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:54.858Z,1509048354.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:55.262Z,1509048355.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:55.394Z,1509048355.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:55.624Z,1509048355.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:55.800Z,1509048355.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:56.025Z,1509048356.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:56.426Z,1509048356.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:56.596Z,1509048356.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:56.821Z,1509048356.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:57.318Z,1509048357.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:57.393Z,1509048357.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:57.620Z,1509048357.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:57.797Z,1509048357.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:58.027Z,1509048358.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:58.429Z,1509048358.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:58.591Z,1509048358.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:58.821Z,1509048358.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:58.995Z,1509048358.995 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:59.259Z,1509048359.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:05:59.605Z,1509048359.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:05:59.651Z,1509048359.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:00.013Z,1509048360.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:00.398Z,1509048360.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:00.428Z,1509048360.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:00.823Z,1509048360.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:01.212Z,1509048361.212 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:01.254Z,1509048361.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:01.632Z,1509048361.632 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:01.656Z,1509048361.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:02.024Z,1509048362.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:02.425Z,1509048362.425 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:02.429Z,1509048362.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:02.807Z,1509048362.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:03.222Z,1509048363.222 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:03.260Z,1509048363.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:03.622Z,1509048363.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:03.627Z,1509048363.627 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:04.025Z,1509048364.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:04.420Z,1509048364.420 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:04.422Z,1509048364.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:04.829Z,1509048364.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:05.217Z,1509048365.217 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:05.249Z,1509048365.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:05.622Z,1509048365.622 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:05.626Z,1509048365.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:06.042Z,1509048366.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:06.419Z,1509048366.419 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:06.452Z,1509048366.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:06.823Z,1509048366.823 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:06.878Z,1509048366.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:07.235Z,1509048367.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:07.428Z,1509048367.428 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:07.664Z,1509048367.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:08.025Z,1509048368.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:08.226Z,1509048368.226 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:08.456Z,1509048368.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:08.630Z,1509048368.630 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:08.848Z,1509048368.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:09.247Z,1509048369.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:09.604Z,1509048369.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:09.611Z,1509048369.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:10.031Z,1509048370.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:10.403Z,1509048370.403 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:10.423Z,1509048370.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:10.819Z,1509048370.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:11.198Z,1509048371.198 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:11.264Z,1509048371.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:11.604Z,1509048371.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:11.636Z,1509048371.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:12.023Z,1509048372.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:12.400Z,1509048372.400 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:12.418Z,1509048372.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:12.805Z,1509048372.805 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:12.824Z,1509048372.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:13.260Z,1509048373.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:13.602Z,1509048373.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:13.646Z,1509048373.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:14.016Z,1509048374.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:14.396Z,1509048374.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:14.438Z,1509048374.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:14.832Z,1509048374.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:15.194Z,1509048375.194 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:15.244Z,1509048375.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:15.597Z,1509048375.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:15.635Z,1509048375.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:16.016Z,1509048376.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:16.395Z,1509048376.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:16.432Z,1509048376.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:16.800Z,1509048376.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:16.821Z,1509048376.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:17.254Z,1509048377.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:17.405Z,1509048377.405 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:17.617Z,1509048377.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:18.021Z,1509048378.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:18.202Z,1509048378.202 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:18.457Z,1509048378.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:18.606Z,1509048378.606 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:18.822Z,1509048378.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:19.246Z,1509048379.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:19.604Z,1509048379.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:19.638Z,1509048379.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:20.015Z,1509048380.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:20.397Z,1509048380.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:20.474Z,1509048380.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:20.871Z,1509048380.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:21.194Z,1509048381.194 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:21.236Z,1509048381.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:21.598Z,1509048381.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:21.633Z,1509048381.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:22.015Z,1509048382.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:22.399Z,1509048382.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:22.450Z,1509048382.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:22.850Z,1509048382.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:23.198Z,1509048383.198 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:23.238Z,1509048383.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:23.610Z,1509048383.610 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:23.626Z,1509048383.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:24.045Z,1509048384.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:24.407Z,1509048384.407 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:24.440Z,1509048384.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:24.811Z,1509048384.811 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:24.814Z,1509048384.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:25.250Z,1509048385.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:25.396Z,1509048385.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:25.631Z,1509048385.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:26.013Z,1509048386.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:26.195Z,1509048386.195 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:26.426Z,1509048386.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:26.602Z,1509048386.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:26.824Z,1509048386.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:27.241Z,1509048387.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:27.608Z,1509048387.608 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:27.639Z,1509048387.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:28.009Z,1509048388.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:28.401Z,1509048388.401 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:28.413Z,1509048388.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:28.819Z,1509048388.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:29.199Z,1509048389.199 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:29.254Z,1509048389.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:29.603Z,1509048389.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:29.625Z,1509048389.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:30.022Z,1509048390.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:30.396Z,1509048390.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:30.423Z,1509048390.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:30.819Z,1509048390.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:31.194Z,1509048391.194 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:31.255Z,1509048391.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:31.602Z,1509048391.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:31.632Z,1509048391.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:32.023Z,1509048392.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:32.395Z,1509048392.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:32.427Z,1509048392.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:32.824Z,1509048392.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:33.193Z,1509048393.193 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:33.245Z,1509048393.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:33.597Z,1509048393.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:33.609Z,1509048393.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:34.011Z,1509048394.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:34.397Z,1509048394.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:34.408Z,1509048394.408 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T20:06:34.408Z,1509048394.408 [BPC1] Data Fault, FailCount= 1
2017-10-26T20:06:34.408Z,1509048394.408 [BPC1](ERROR): Data Fault
2017-10-26T20:06:34.417Z,1509048394.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:34.527Z,1509048394.527 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T20:06:34.807Z,1509048394.807 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:34.823Z,1509048394.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:35.229Z,1509048395.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:35.404Z,1509048395.404 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:35.622Z,1509048395.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:35.677Z,1509048395.677 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:06:35.677Z,1509048395.677 [BPC1] No Fault, FailCount= 1
2017-10-26T20:06:36.078Z,1509048396.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:36.203Z,1509048396.203 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:36.424Z,1509048396.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:36.606Z,1509048396.606 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:36.863Z,1509048396.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:37.241Z,1509048397.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:37.399Z,1509048397.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:37.628Z,1509048397.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:37.804Z,1509048397.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:38.026Z,1509048398.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:38.427Z,1509048398.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:38.597Z,1509048398.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:38.835Z,1509048398.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:39.243Z,1509048399.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:39.398Z,1509048399.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:39.613Z,1509048399.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:39.804Z,1509048399.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:40.019Z,1509048400.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:40.415Z,1509048400.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:40.596Z,1509048400.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:40.820Z,1509048400.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:41.228Z,1509048401.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:41.393Z,1509048401.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:41.619Z,1509048401.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:41.800Z,1509048401.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:42.023Z,1509048402.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:42.423Z,1509048402.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:42.596Z,1509048402.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:42.830Z,1509048402.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:43.246Z,1509048403.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:43.392Z,1509048403.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:43.611Z,1509048403.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:43.797Z,1509048403.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:44.045Z,1509048404.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:44.412Z,1509048404.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:44.594Z,1509048404.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:44.816Z,1509048404.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:45.247Z,1509048405.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:45.392Z,1509048405.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:45.621Z,1509048405.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:45.796Z,1509048405.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:46.027Z,1509048406.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:46.419Z,1509048406.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:46.597Z,1509048406.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:46.825Z,1509048406.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:47.237Z,1509048407.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:47.398Z,1509048407.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:47.625Z,1509048407.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:47.803Z,1509048407.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:48.029Z,1509048408.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:48.435Z,1509048408.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:48.596Z,1509048408.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:48.887Z,1509048408.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:49.288Z,1509048409.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:49.394Z,1509048409.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:49.612Z,1509048409.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:49.798Z,1509048409.798 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:50.067Z,1509048410.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:50.424Z,1509048410.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:50.597Z,1509048410.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:50.842Z,1509048410.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:51.004Z,1509048411.004 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:51.275Z,1509048411.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:51.409Z,1509048411.409 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:51.625Z,1509048411.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:52.031Z,1509048412.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:52.207Z,1509048412.207 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:52.425Z,1509048412.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:52.611Z,1509048412.611 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:52.827Z,1509048412.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:53.239Z,1509048413.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:53.620Z,1509048413.620 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:53.625Z,1509048413.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:54.020Z,1509048414.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:54.413Z,1509048414.413 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:54.430Z,1509048414.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:54.770Z,1509048414.770 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:06:54.827Z,1509048414.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:55.212Z,1509048415.212 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:55.325Z,1509048415.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:55.615Z,1509048415.615 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:55.719Z,1509048415.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:56.121Z,1509048416.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:56.414Z,1509048416.414 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:56.525Z,1509048416.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:56.817Z,1509048416.817 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:56.917Z,1509048416.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:57.316Z,1509048417.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:57.414Z,1509048417.414 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:57.720Z,1509048417.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:58.108Z,1509048418.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:58.212Z,1509048418.212 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:58.510Z,1509048418.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:58.616Z,1509048418.616 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:58.912Z,1509048418.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:59.332Z,1509048419.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:59.413Z,1509048419.413 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:06:59.713Z,1509048419.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:06:59.819Z,1509048419.819 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:00.142Z,1509048420.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:00.521Z,1509048420.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:00.603Z,1509048420.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:00.923Z,1509048420.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:01.330Z,1509048421.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:01.396Z,1509048421.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:01.714Z,1509048421.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:01.801Z,1509048421.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:02.121Z,1509048422.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:02.515Z,1509048422.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:02.602Z,1509048422.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:02.916Z,1509048422.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:03.365Z,1509048423.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:03.399Z,1509048423.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:03.753Z,1509048423.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:03.804Z,1509048423.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:04.110Z,1509048424.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:04.523Z,1509048424.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:04.602Z,1509048424.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:05.010Z,1509048425.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:05.340Z,1509048425.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:05.386Z,1509048425.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:05.740Z,1509048425.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:06.106Z,1509048426.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:06.186Z,1509048426.186 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:06.540Z,1509048426.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:06.604Z,1509048426.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:06.923Z,1509048426.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:07.327Z,1509048427.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:07.402Z,1509048427.402 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:07.718Z,1509048427.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:08.131Z,1509048428.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:08.199Z,1509048428.199 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:08.533Z,1509048428.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:08.603Z,1509048428.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:08.907Z,1509048428.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:09.331Z,1509048429.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:09.397Z,1509048429.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:09.721Z,1509048429.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:09.801Z,1509048429.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:10.120Z,1509048430.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:10.522Z,1509048430.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:10.598Z,1509048430.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:10.904Z,1509048430.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:11.310Z,1509048431.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:11.401Z,1509048431.401 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:11.718Z,1509048431.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:11.808Z,1509048431.808 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:12.112Z,1509048432.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:12.532Z,1509048432.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:12.602Z,1509048432.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:12.917Z,1509048432.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:13.308Z,1509048433.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:13.399Z,1509048433.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:13.715Z,1509048433.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:13.803Z,1509048433.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:14.117Z,1509048434.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:14.530Z,1509048434.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:14.601Z,1509048434.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:14.922Z,1509048434.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:15.312Z,1509048435.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:15.398Z,1509048435.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:15.708Z,1509048435.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:15.803Z,1509048435.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:16.129Z,1509048436.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:16.531Z,1509048436.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:16.599Z,1509048436.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:16.928Z,1509048436.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:17.318Z,1509048437.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:17.397Z,1509048437.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:17.727Z,1509048437.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:17.802Z,1509048437.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:18.137Z,1509048438.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:18.575Z,1509048438.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:18.599Z,1509048438.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:18.909Z,1509048438.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:19.322Z,1509048439.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:19.400Z,1509048439.400 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:19.714Z,1509048439.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:19.805Z,1509048439.805 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:20.127Z,1509048440.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:20.538Z,1509048440.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:20.598Z,1509048440.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:21.205Z,1509048441.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:21.395Z,1509048441.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:21.555Z,1509048441.555 [BPC1](ERROR): Failed to receive battery data
2017-10-26T20:07:21.555Z,1509048441.555 [BPC1] Communications Fault, FailCount= 1
2017-10-26T20:07:21.555Z,1509048441.555 [BPC1](ERROR): Communications Fault
2017-10-26T20:07:21.586Z,1509048441.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:21.676Z,1509048441.676 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T20:07:21.800Z,1509048441.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:21.957Z,1509048441.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:22.331Z,1509048442.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:22.593Z,1509048442.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:22.740Z,1509048442.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:22.903Z,1509048442.903 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:07:22.903Z,1509048442.903 [BPC1] No Fault, FailCount= 1
2017-10-26T20:07:23.224Z,1509048443.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:23.390Z,1509048443.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:23.543Z,1509048443.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:23.795Z,1509048443.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:23.946Z,1509048443.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:24.352Z,1509048444.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:24.588Z,1509048444.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:24.738Z,1509048444.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:25.207Z,1509048445.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:25.388Z,1509048445.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:25.553Z,1509048445.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:25.794Z,1509048445.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:25.930Z,1509048445.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:26.337Z,1509048446.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:26.587Z,1509048446.587 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:26.740Z,1509048446.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:27.138Z,1509048447.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:27.385Z,1509048447.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:27.543Z,1509048447.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:27.937Z,1509048447.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:28.184Z,1509048448.184 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:28.352Z,1509048448.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:28.602Z,1509048448.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:28.753Z,1509048448.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:29.147Z,1509048449.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:29.372Z,1509048449.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:29.550Z,1509048449.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:29.931Z,1509048449.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:30.170Z,1509048450.170 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:30.355Z,1509048450.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:30.601Z,1509048450.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:30.763Z,1509048450.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:31.133Z,1509048451.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:31.399Z,1509048451.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:31.533Z,1509048451.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:31.804Z,1509048451.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:31.943Z,1509048451.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:32.379Z,1509048452.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:32.597Z,1509048452.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:32.737Z,1509048452.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:33.144Z,1509048453.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:33.394Z,1509048453.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:33.548Z,1509048453.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:33.799Z,1509048453.799 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:33.961Z,1509048453.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:34.331Z,1509048454.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:34.738Z,1509048454.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:35.142Z,1509048455.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:35.541Z,1509048455.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:36.002Z,1509048456.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:36.341Z,1509048456.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:36.595Z,1509048456.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:36.745Z,1509048456.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:37.185Z,1509048457.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:37.392Z,1509048457.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:37.551Z,1509048457.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:37.975Z,1509048457.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:38.192Z,1509048458.192 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:38.384Z,1509048458.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:38.606Z,1509048458.606 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:38.737Z,1509048458.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:39.145Z,1509048459.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:39.387Z,1509048459.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:39.546Z,1509048459.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:39.949Z,1509048459.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:40.187Z,1509048460.187 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:40.346Z,1509048460.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:40.601Z,1509048460.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:40.756Z,1509048460.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:41.156Z,1509048461.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:41.398Z,1509048461.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:41.553Z,1509048461.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:41.804Z,1509048461.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:41.964Z,1509048461.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:42.337Z,1509048462.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:42.596Z,1509048462.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:42.734Z,1509048462.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:43.147Z,1509048463.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:43.397Z,1509048463.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:43.548Z,1509048463.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:43.802Z,1509048463.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:43.929Z,1509048463.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:44.337Z,1509048464.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:44.595Z,1509048464.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:44.734Z,1509048464.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:45.135Z,1509048465.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:45.388Z,1509048465.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:45.543Z,1509048465.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:45.947Z,1509048465.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:46.192Z,1509048466.192 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:46.362Z,1509048466.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:46.602Z,1509048466.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:46.729Z,1509048466.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:47.157Z,1509048467.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:47.396Z,1509048467.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:47.547Z,1509048467.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:47.939Z,1509048467.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:48.195Z,1509048468.195 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:48.453Z,1509048468.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:48.601Z,1509048468.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:48.856Z,1509048468.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:49.297Z,1509048469.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:49.395Z,1509048469.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:49.660Z,1509048469.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:49.799Z,1509048469.799 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:07:50.061Z,1509048470.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:50.455Z,1509048470.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:50.891Z,1509048470.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:51.278Z,1509048471.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:51.681Z,1509048471.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:52.055Z,1509048472.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:52.486Z,1509048472.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:52.890Z,1509048472.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:53.257Z,1509048473.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:53.665Z,1509048473.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:54.061Z,1509048474.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:54.453Z,1509048474.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:54.799Z,1509048474.799 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:07:54.857Z,1509048474.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:55.284Z,1509048475.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:55.651Z,1509048475.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:56.046Z,1509048476.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:56.450Z,1509048476.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:56.848Z,1509048476.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:57.261Z,1509048477.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:57.670Z,1509048477.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:58.055Z,1509048478.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:58.454Z,1509048478.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:58.867Z,1509048478.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:59.278Z,1509048479.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:07:59.668Z,1509048479.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:00.048Z,1509048480.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:00.461Z,1509048480.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:00.859Z,1509048480.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:01.383Z,1509048481.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:01.777Z,1509048481.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:02.161Z,1509048482.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:02.559Z,1509048482.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:02.954Z,1509048482.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:03.415Z,1509048483.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:03.753Z,1509048483.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:04.160Z,1509048484.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:04.572Z,1509048484.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:04.971Z,1509048484.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:05.426Z,1509048485.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:05.761Z,1509048485.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:06.205Z,1509048486.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:06.567Z,1509048486.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:06.993Z,1509048486.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:07.392Z,1509048487.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:07.789Z,1509048487.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:08.208Z,1509048488.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:08.559Z,1509048488.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:08.961Z,1509048488.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:09.372Z,1509048489.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:09.768Z,1509048489.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:10.161Z,1509048490.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:10.559Z,1509048490.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:10.580Z,1509048490.580 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:08:10.984Z,1509048490.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:11.377Z,1509048491.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:08:11.390Z,1509048491.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:11.761Z,1509048491.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:11.783Z,1509048491.783 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:08:12.154Z,1509048492.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:12.559Z,1509048492.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:13.020Z,1509048493.020 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:13.021Z,1509048493.021 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 7
2017-10-26T20:08:13.021Z,1509048493.021 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:08:13.034Z,1509048493.034 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:13.043Z,1509048493.043 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 7
2017-10-26T20:08:13.043Z,1509048493.043 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:08:13.160Z,1509048493.160 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:08:13.161Z,1509048493.161 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:08:13.491Z,1509048493.491 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:08:13.491Z,1509048493.491 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 7
2017-10-26T20:08:13.492Z,1509048493.492 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:08:13.492Z,1509048493.492 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 7
2017-10-26T20:08:13.753Z,1509048493.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:08:13.753Z,1509048493.753 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:08:13.753Z,1509048493.753 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:08:13.756Z,1509048493.756 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:08:13.757Z,1509048493.757 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:08:13.757Z,1509048493.757 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:08:14.153Z,1509048494.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:14.591Z,1509048494.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:15.033Z,1509048495.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:15.356Z,1509048495.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:15.766Z,1509048495.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:16.209Z,1509048496.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:16.569Z,1509048496.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:16.964Z,1509048496.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:17.356Z,1509048497.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:17.762Z,1509048497.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:18.213Z,1509048498.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:18.573Z,1509048498.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:18.972Z,1509048498.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:19.347Z,1509048499.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:19.795Z,1509048499.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:20.165Z,1509048500.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:20.558Z,1509048500.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:21.003Z,1509048501.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:21.368Z,1509048501.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:21.789Z,1509048501.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:22.208Z,1509048502.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:22.580Z,1509048502.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:22.947Z,1509048502.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:23.350Z,1509048503.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:23.774Z,1509048503.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:24.154Z,1509048504.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:24.555Z,1509048504.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:24.976Z,1509048504.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:25.377Z,1509048505.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:25.799Z,1509048505.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:26.152Z,1509048506.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:26.561Z,1509048506.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:27.087Z,1509048507.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:27.368Z,1509048507.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:27.767Z,1509048507.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:28.161Z,1509048508.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:28.559Z,1509048508.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:29.050Z,1509048509.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:29.378Z,1509048509.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:29.747Z,1509048509.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:30.150Z,1509048510.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:30.558Z,1509048510.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:31.027Z,1509048511.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:31.386Z,1509048511.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:31.747Z,1509048511.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:32.149Z,1509048512.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:32.578Z,1509048512.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:32.955Z,1509048512.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:33.383Z,1509048513.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:33.742Z,1509048513.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:34.206Z,1509048514.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:34.552Z,1509048514.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:35.052Z,1509048515.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:35.368Z,1509048515.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:35.808Z,1509048515.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:36.205Z,1509048516.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:36.558Z,1509048516.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:37.022Z,1509048517.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:37.350Z,1509048517.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:37.784Z,1509048517.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:38.155Z,1509048518.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:38.561Z,1509048518.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:39.032Z,1509048519.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:39.410Z,1509048519.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:39.765Z,1509048519.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:40.164Z,1509048520.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:40.554Z,1509048520.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:41.051Z,1509048521.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:41.355Z,1509048521.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:41.781Z,1509048521.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:42.160Z,1509048522.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:42.553Z,1509048522.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:43.034Z,1509048523.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:43.377Z,1509048523.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:43.773Z,1509048523.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:44.200Z,1509048524.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:44.546Z,1509048524.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:45.006Z,1509048525.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:45.360Z,1509048525.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:45.741Z,1509048525.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:46.211Z,1509048526.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:46.567Z,1509048526.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:47.069Z,1509048527.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:47.383Z,1509048527.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:47.760Z,1509048527.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:48.231Z,1509048528.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:48.558Z,1509048528.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:49.052Z,1509048529.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:49.374Z,1509048529.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:49.799Z,1509048529.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:50.216Z,1509048530.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:50.560Z,1509048530.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:51.015Z,1509048531.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:51.366Z,1509048531.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:51.763Z,1509048531.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:52.175Z,1509048532.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:52.560Z,1509048532.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:52.949Z,1509048532.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:53.359Z,1509048533.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:53.759Z,1509048533.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:54.152Z,1509048534.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:54.566Z,1509048534.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:55.027Z,1509048535.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:55.314Z,1509048535.314 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:08:55.383Z,1509048535.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:55.752Z,1509048535.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:56.156Z,1509048536.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:56.556Z,1509048536.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:57.036Z,1509048537.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:57.392Z,1509048537.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:57.776Z,1509048537.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:58.180Z,1509048538.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:58.562Z,1509048538.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:59.028Z,1509048539.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:59.390Z,1509048539.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:08:59.760Z,1509048539.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:00.148Z,1509048540.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:00.558Z,1509048540.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:01.067Z,1509048541.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:01.371Z,1509048541.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:01.747Z,1509048541.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:02.203Z,1509048542.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:02.564Z,1509048542.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:03.063Z,1509048543.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:03.386Z,1509048543.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:03.776Z,1509048543.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:04.211Z,1509048544.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:04.561Z,1509048544.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:05.046Z,1509048545.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:05.398Z,1509048545.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:05.771Z,1509048545.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:06.161Z,1509048546.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:06.560Z,1509048546.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:07.031Z,1509048547.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:07.366Z,1509048547.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:07.760Z,1509048547.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:08.159Z,1509048548.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:08.554Z,1509048548.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:09.029Z,1509048549.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:09.369Z,1509048549.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:09.785Z,1509048549.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:10.307Z,1509048550.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:10.717Z,1509048550.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:11.103Z,1509048551.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:11.482Z,1509048551.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:11.884Z,1509048551.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:12.275Z,1509048552.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:12.688Z,1509048552.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:13.088Z,1509048553.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:13.492Z,1509048553.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:13.904Z,1509048553.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:14.297Z,1509048554.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:14.713Z,1509048554.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:15.089Z,1509048555.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:15.526Z,1509048555.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:15.853Z,1509048555.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:16.318Z,1509048556.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:16.688Z,1509048556.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:17.098Z,1509048557.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:17.474Z,1509048557.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:17.910Z,1509048557.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:18.306Z,1509048558.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:18.695Z,1509048558.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:19.076Z,1509048559.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:19.489Z,1509048559.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:19.888Z,1509048559.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:20.279Z,1509048560.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:20.696Z,1509048560.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:21.088Z,1509048561.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:21.476Z,1509048561.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:21.880Z,1509048561.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:22.281Z,1509048562.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:22.679Z,1509048562.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:23.074Z,1509048563.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:23.471Z,1509048563.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:23.888Z,1509048563.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:24.274Z,1509048564.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:24.674Z,1509048564.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:25.076Z,1509048565.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:25.478Z,1509048565.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:25.882Z,1509048565.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:26.287Z,1509048566.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:26.702Z,1509048566.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:27.109Z,1509048567.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:27.478Z,1509048567.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:27.892Z,1509048567.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:28.403Z,1509048568.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:28.842Z,1509048568.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:29.221Z,1509048569.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:29.614Z,1509048569.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:29.999Z,1509048569.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:30.419Z,1509048570.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:30.855Z,1509048570.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:31.235Z,1509048571.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:31.632Z,1509048571.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:32.013Z,1509048572.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:32.429Z,1509048572.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:32.821Z,1509048572.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:33.246Z,1509048573.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:33.603Z,1509048573.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:34.008Z,1509048574.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:34.411Z,1509048574.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:34.808Z,1509048574.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:35.225Z,1509048575.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:35.599Z,1509048575.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:36.012Z,1509048576.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:36.465Z,1509048576.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:36.824Z,1509048576.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:37.233Z,1509048577.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:37.607Z,1509048577.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:37.999Z,1509048577.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:38.400Z,1509048578.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:38.800Z,1509048578.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:39.240Z,1509048579.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:39.606Z,1509048579.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:40.006Z,1509048580.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:40.416Z,1509048580.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:40.794Z,1509048580.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:41.226Z,1509048581.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:41.591Z,1509048581.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:41.995Z,1509048581.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:42.403Z,1509048582.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:42.809Z,1509048582.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:43.238Z,1509048583.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:43.620Z,1509048583.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:44.013Z,1509048584.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:44.447Z,1509048584.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:44.812Z,1509048584.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:45.272Z,1509048585.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:45.624Z,1509048585.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:46.030Z,1509048586.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:46.401Z,1509048586.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:46.839Z,1509048586.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:47.251Z,1509048587.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:47.645Z,1509048587.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:48.009Z,1509048588.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:48.409Z,1509048588.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:48.803Z,1509048588.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:49.233Z,1509048589.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:49.605Z,1509048589.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:49.999Z,1509048589.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:50.414Z,1509048590.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:50.803Z,1509048590.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:51.216Z,1509048591.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:51.607Z,1509048591.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:52.011Z,1509048592.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:52.406Z,1509048592.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:52.800Z,1509048592.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:53.240Z,1509048593.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:53.599Z,1509048593.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:53.606Z,1509048593.606 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:G.Wait](INFO): Done Waiting.
2017-10-26T20:09:53.607Z,1509048593.607 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:G.Wait] Stopped
2017-10-26T20:09:53.607Z,1509048593.607 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:G.Wait](DEBUG): Uninitialize Wait Component.
2017-10-26T20:09:53.607Z,1509048593.607 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:H.] Running Loop=1
2017-10-26T20:09:53.607Z,1509048593.607 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:H.](INFO): Initializing BallastAndTrim.
2017-10-26T20:09:54.004Z,1509048594.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:54.408Z,1509048594.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:54.813Z,1509048594.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:55.162Z,1509048595.162 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:09:55.226Z,1509048595.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:55.593Z,1509048595.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:56.010Z,1509048596.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:56.411Z,1509048596.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:56.808Z,1509048596.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:57.217Z,1509048597.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:57.607Z,1509048597.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:58.010Z,1509048598.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:58.410Z,1509048598.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:58.802Z,1509048598.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:59.314Z,1509048599.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:09:59.635Z,1509048599.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:00.055Z,1509048600.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:00.411Z,1509048600.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:00.805Z,1509048600.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:01.242Z,1509048601.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:01.669Z,1509048601.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:02.256Z,1509048602.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:02.627Z,1509048602.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:02.995Z,1509048602.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:03.403Z,1509048603.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:03.803Z,1509048603.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:04.204Z,1509048604.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:04.611Z,1509048604.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:05.066Z,1509048605.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:05.411Z,1509048605.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:05.809Z,1509048605.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:06.225Z,1509048606.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:06.620Z,1509048606.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:07.054Z,1509048607.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:07.406Z,1509048607.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:07.804Z,1509048607.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:08.210Z,1509048608.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:08.607Z,1509048608.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:09.064Z,1509048609.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:09.393Z,1509048609.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:09.811Z,1509048609.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:10.206Z,1509048610.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:10.607Z,1509048610.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:11.081Z,1509048611.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:11.408Z,1509048611.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:11.820Z,1509048611.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:12.222Z,1509048612.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:12.603Z,1509048612.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:13.069Z,1509048613.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:13.408Z,1509048613.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:13.807Z,1509048613.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:14.234Z,1509048614.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:14.637Z,1509048614.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:15.095Z,1509048615.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:15.403Z,1509048615.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:15.811Z,1509048615.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:16.233Z,1509048616.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:16.608Z,1509048616.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:17.121Z,1509048617.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:17.441Z,1509048617.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:17.801Z,1509048617.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:18.226Z,1509048618.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:18.624Z,1509048618.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:19.001Z,1509048619.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:19.414Z,1509048619.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:19.819Z,1509048619.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:20.224Z,1509048620.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:20.589Z,1509048620.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:21.004Z,1509048621.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:21.402Z,1509048621.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:21.819Z,1509048621.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:22.313Z,1509048622.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:22.716Z,1509048622.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:23.124Z,1509048623.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:23.617Z,1509048623.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:23.921Z,1509048623.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:24.331Z,1509048624.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:24.730Z,1509048624.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:25.125Z,1509048625.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:25.551Z,1509048625.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:25.938Z,1509048625.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:26.332Z,1509048626.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:26.724Z,1509048626.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:27.130Z,1509048627.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:27.537Z,1509048627.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:27.939Z,1509048627.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:28.328Z,1509048628.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:28.742Z,1509048628.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:29.141Z,1509048629.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:29.585Z,1509048629.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:29.929Z,1509048629.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:30.325Z,1509048630.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:30.756Z,1509048630.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:31.163Z,1509048631.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:31.568Z,1509048631.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:31.989Z,1509048631.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:32.349Z,1509048632.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:32.733Z,1509048632.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:33.123Z,1509048633.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:33.528Z,1509048633.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:33.937Z,1509048633.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:34.338Z,1509048634.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:34.740Z,1509048634.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:35.142Z,1509048635.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:35.585Z,1509048635.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:35.916Z,1509048635.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:36.328Z,1509048636.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:36.727Z,1509048636.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:37.176Z,1509048637.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:37.614Z,1509048637.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:37.930Z,1509048637.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:38.328Z,1509048638.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:38.733Z,1509048638.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:39.146Z,1509048639.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:39.539Z,1509048639.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:39.920Z,1509048639.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:40.326Z,1509048640.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:40.725Z,1509048640.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:41.134Z,1509048641.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:41.534Z,1509048641.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:41.912Z,1509048641.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:42.317Z,1509048642.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:42.717Z,1509048642.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:43.117Z,1509048643.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:43.534Z,1509048643.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:43.928Z,1509048643.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:44.393Z,1509048644.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:44.734Z,1509048644.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:45.162Z,1509048645.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:45.518Z,1509048645.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:45.954Z,1509048645.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:46.351Z,1509048646.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:46.747Z,1509048646.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:47.116Z,1509048647.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:47.533Z,1509048647.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:47.925Z,1509048647.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:48.342Z,1509048648.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:48.750Z,1509048648.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:49.152Z,1509048649.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:49.529Z,1509048649.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:49.928Z,1509048649.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:50.350Z,1509048650.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:50.726Z,1509048650.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:51.139Z,1509048651.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:51.563Z,1509048651.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:51.926Z,1509048651.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:52.378Z,1509048652.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:52.720Z,1509048652.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:53.134Z,1509048653.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:53.538Z,1509048653.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:53.972Z,1509048653.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:54.355Z,1509048654.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:54.717Z,1509048654.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:55.079Z,1509048655.079 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:10:55.120Z,1509048655.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:55.525Z,1509048655.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:55.931Z,1509048655.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:56.327Z,1509048656.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:56.731Z,1509048656.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:57.131Z,1509048657.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:57.531Z,1509048657.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:57.931Z,1509048657.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:58.384Z,1509048658.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:58.723Z,1509048658.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:59.141Z,1509048659.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:59.564Z,1509048659.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:10:59.923Z,1509048659.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:00.369Z,1509048660.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:00.769Z,1509048660.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:01.130Z,1509048661.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:01.539Z,1509048661.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:01.938Z,1509048661.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:02.323Z,1509048662.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:02.717Z,1509048662.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:03.119Z,1509048663.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:03.545Z,1509048663.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:03.922Z,1509048663.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:04.322Z,1509048664.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:04.736Z,1509048664.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:05.149Z,1509048665.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:05.555Z,1509048665.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:05.938Z,1509048665.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:06.323Z,1509048666.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:06.736Z,1509048666.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:07.132Z,1509048667.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:07.523Z,1509048667.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:07.924Z,1509048667.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:08.333Z,1509048668.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:08.731Z,1509048668.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:09.155Z,1509048669.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:09.518Z,1509048669.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:09.934Z,1509048669.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:10.328Z,1509048670.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:10.762Z,1509048670.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:11.134Z,1509048671.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:11.536Z,1509048671.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:11.938Z,1509048671.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:12.310Z,1509048672.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:12.751Z,1509048672.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:13.227Z,1509048673.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:13.524Z,1509048673.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:13.966Z,1509048673.966 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:13.966Z,1509048673.966 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 8
2017-10-26T20:11:13.966Z,1509048673.966 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:11:13.970Z,1509048673.970 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:13.970Z,1509048673.970 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 8
2017-10-26T20:11:13.970Z,1509048673.970 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:11:14.050Z,1509048674.050 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:11:14.050Z,1509048674.050 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:11:14.370Z,1509048674.370 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:11:14.370Z,1509048674.370 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 8
2017-10-26T20:11:14.370Z,1509048674.370 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:11:14.370Z,1509048674.370 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 8
2017-10-26T20:11:14.745Z,1509048674.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:11:14.746Z,1509048674.746 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:11:14.746Z,1509048674.746 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:11:14.762Z,1509048674.762 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:11:14.763Z,1509048674.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:11:14.763Z,1509048674.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:11:15.148Z,1509048675.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:15.534Z,1509048675.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:15.913Z,1509048675.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:16.347Z,1509048676.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:16.721Z,1509048676.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:17.122Z,1509048677.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:17.526Z,1509048677.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:17.934Z,1509048677.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:18.341Z,1509048678.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:18.739Z,1509048678.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:19.115Z,1509048679.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:19.522Z,1509048679.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:19.933Z,1509048679.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:20.326Z,1509048680.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:20.720Z,1509048680.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:21.125Z,1509048681.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:21.529Z,1509048681.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:21.978Z,1509048681.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:22.351Z,1509048682.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:22.713Z,1509048682.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:23.151Z,1509048683.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:23.517Z,1509048683.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:23.956Z,1509048683.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:24.321Z,1509048684.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:24.748Z,1509048684.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:25.147Z,1509048685.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:25.556Z,1509048685.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:25.914Z,1509048685.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:26.339Z,1509048686.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:26.778Z,1509048686.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:27.218Z,1509048687.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:27.523Z,1509048687.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:27.955Z,1509048687.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:28.327Z,1509048688.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:28.758Z,1509048688.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:29.140Z,1509048689.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:29.519Z,1509048689.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:29.929Z,1509048689.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:30.327Z,1509048690.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:30.738Z,1509048690.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:31.131Z,1509048691.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:31.527Z,1509048691.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:31.927Z,1509048691.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:32.336Z,1509048692.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:32.716Z,1509048692.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:33.133Z,1509048693.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:33.525Z,1509048693.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:33.927Z,1509048693.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:34.327Z,1509048694.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:34.732Z,1509048694.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:35.260Z,1509048695.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:35.686Z,1509048695.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:36.068Z,1509048696.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:36.467Z,1509048696.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:36.874Z,1509048696.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:37.271Z,1509048697.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:37.671Z,1509048697.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:38.072Z,1509048698.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:38.485Z,1509048698.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:38.887Z,1509048698.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:39.276Z,1509048699.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:39.671Z,1509048699.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:40.075Z,1509048700.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:40.473Z,1509048700.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:40.924Z,1509048700.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:41.313Z,1509048701.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:41.669Z,1509048701.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:42.098Z,1509048702.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:42.465Z,1509048702.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:42.907Z,1509048702.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:43.302Z,1509048703.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:43.678Z,1509048703.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:44.057Z,1509048704.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:44.472Z,1509048704.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:44.866Z,1509048704.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:45.282Z,1509048705.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:45.660Z,1509048705.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:46.063Z,1509048706.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:46.489Z,1509048706.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:46.865Z,1509048706.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:47.274Z,1509048707.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:47.677Z,1509048707.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:48.084Z,1509048708.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:48.466Z,1509048708.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:49.060Z,1509048709.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:49.403Z,1509048709.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:49.792Z,1509048709.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:50.220Z,1509048710.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:50.593Z,1509048710.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:51.060Z,1509048711.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:51.428Z,1509048711.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:51.789Z,1509048711.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:52.231Z,1509048712.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:52.599Z,1509048712.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:53.069Z,1509048713.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:53.409Z,1509048713.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:53.791Z,1509048713.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:54.213Z,1509048714.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:54.575Z,1509048714.575 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T20:11:54.576Z,1509048714.576 [BPC1] Data Fault, FailCount= 1
2017-10-26T20:11:54.576Z,1509048714.576 [BPC1](ERROR): Data Fault
2017-10-26T20:11:54.611Z,1509048714.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:54.725Z,1509048714.725 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T20:11:55.056Z,1509048715.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:55.337Z,1509048715.337 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:11:55.417Z,1509048715.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:55.816Z,1509048715.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:55.926Z,1509048715.926 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:11:55.926Z,1509048715.926 [BPC1] No Fault, FailCount= 1
2017-10-26T20:11:56.272Z,1509048716.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:56.606Z,1509048716.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:57.084Z,1509048717.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:57.416Z,1509048717.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:57.812Z,1509048717.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:58.215Z,1509048718.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:58.593Z,1509048718.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:59.063Z,1509048719.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:59.411Z,1509048719.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:11:59.902Z,1509048719.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:00.225Z,1509048720.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:00.608Z,1509048720.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:01.030Z,1509048721.030 [PNI_TCM](ERROR): CRC does not match. Expected:0x53187 got:0x45788
2017-10-26T20:12:01.073Z,1509048721.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:01.386Z,1509048721.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:01.789Z,1509048721.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:02.210Z,1509048722.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:02.609Z,1509048722.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:03.053Z,1509048723.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:03.404Z,1509048723.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:03.803Z,1509048723.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:04.205Z,1509048724.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:04.619Z,1509048724.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:05.050Z,1509048725.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:05.421Z,1509048725.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:05.808Z,1509048725.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:06.209Z,1509048726.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:06.586Z,1509048726.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:07.052Z,1509048727.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:07.399Z,1509048727.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:07.848Z,1509048727.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:08.170Z,1509048728.170 [PNI_TCM](ERROR): CRC does not match. Expected:0x10354 got:0x6592
2017-10-26T20:12:08.207Z,1509048728.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:08.608Z,1509048728.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:09.104Z,1509048729.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:09.389Z,1509048729.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:09.821Z,1509048729.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:10.220Z,1509048730.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:10.622Z,1509048730.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:11.074Z,1509048731.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:11.420Z,1509048731.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:11.819Z,1509048731.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:12.213Z,1509048732.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:12.607Z,1509048732.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:13.055Z,1509048733.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:13.401Z,1509048733.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:13.809Z,1509048733.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:14.215Z,1509048734.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:14.599Z,1509048734.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:15.084Z,1509048735.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:15.407Z,1509048735.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:15.821Z,1509048735.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:16.213Z,1509048736.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:16.613Z,1509048736.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:17.062Z,1509048737.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:17.395Z,1509048737.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:17.801Z,1509048737.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:18.214Z,1509048738.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:18.612Z,1509048738.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:19.066Z,1509048739.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:19.387Z,1509048739.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:19.809Z,1509048739.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:20.208Z,1509048740.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:20.611Z,1509048740.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:21.066Z,1509048741.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:21.434Z,1509048741.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:21.836Z,1509048741.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:22.218Z,1509048742.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:22.601Z,1509048742.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:23.115Z,1509048743.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:23.411Z,1509048743.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:23.819Z,1509048743.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:24.217Z,1509048744.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:24.620Z,1509048744.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:25.109Z,1509048745.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:25.409Z,1509048745.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:25.790Z,1509048745.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:26.210Z,1509048746.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:26.593Z,1509048746.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:27.097Z,1509048747.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:27.411Z,1509048747.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:27.812Z,1509048747.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:28.219Z,1509048748.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:28.604Z,1509048748.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:29.075Z,1509048749.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:29.411Z,1509048749.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:29.787Z,1509048749.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:30.242Z,1509048750.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:30.592Z,1509048750.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:31.051Z,1509048751.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:31.397Z,1509048751.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:31.794Z,1509048751.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:32.221Z,1509048752.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:32.609Z,1509048752.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:33.066Z,1509048753.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:33.404Z,1509048753.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:33.820Z,1509048753.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:34.225Z,1509048754.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:34.592Z,1509048754.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:35.083Z,1509048755.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:35.429Z,1509048755.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:35.924Z,1509048755.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:36.341Z,1509048756.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:36.735Z,1509048756.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:37.228Z,1509048757.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:37.524Z,1509048757.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:37.956Z,1509048757.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:38.351Z,1509048758.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:38.766Z,1509048758.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:39.161Z,1509048759.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:39.543Z,1509048759.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:39.923Z,1509048759.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:40.337Z,1509048760.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:40.732Z,1509048760.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:41.132Z,1509048761.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:41.624Z,1509048761.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:41.935Z,1509048761.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:42.341Z,1509048762.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:42.734Z,1509048762.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:43.139Z,1509048763.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:43.606Z,1509048763.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:43.969Z,1509048763.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:44.367Z,1509048764.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:44.729Z,1509048764.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:45.132Z,1509048765.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:45.538Z,1509048765.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:45.932Z,1509048765.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:46.345Z,1509048766.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:46.742Z,1509048766.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:47.150Z,1509048767.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:47.581Z,1509048767.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:47.929Z,1509048767.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:48.337Z,1509048768.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:48.742Z,1509048768.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:49.168Z,1509048769.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:49.542Z,1509048769.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:49.975Z,1509048769.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:50.335Z,1509048770.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:50.749Z,1509048770.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:51.160Z,1509048771.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:51.541Z,1509048771.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:51.925Z,1509048771.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:52.349Z,1509048772.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:52.866Z,1509048772.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:53.310Z,1509048773.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:53.644Z,1509048773.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:54.094Z,1509048774.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:54.478Z,1509048774.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:54.852Z,1509048774.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:55.265Z,1509048775.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:55.602Z,1509048775.602 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:12:55.662Z,1509048775.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:56.052Z,1509048776.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:56.465Z,1509048776.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:56.862Z,1509048776.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:57.275Z,1509048777.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:57.659Z,1509048777.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:58.049Z,1509048778.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:58.452Z,1509048778.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:58.855Z,1509048778.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:59.252Z,1509048779.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:12:59.678Z,1509048779.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:00.060Z,1509048780.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:00.468Z,1509048780.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:00.856Z,1509048780.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:01.331Z,1509048781.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:01.671Z,1509048781.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:02.078Z,1509048782.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:02.452Z,1509048782.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:02.854Z,1509048782.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:03.256Z,1509048783.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:03.693Z,1509048783.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:04.063Z,1509048784.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:04.462Z,1509048784.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:04.863Z,1509048784.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:05.280Z,1509048785.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:05.664Z,1509048785.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:06.081Z,1509048786.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:06.445Z,1509048786.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:06.848Z,1509048786.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:07.294Z,1509048787.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:07.677Z,1509048787.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:08.095Z,1509048788.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:08.501Z,1509048788.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:08.863Z,1509048788.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:09.272Z,1509048789.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:09.649Z,1509048789.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:10.049Z,1509048790.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:10.450Z,1509048790.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:10.863Z,1509048790.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:11.265Z,1509048791.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:11.658Z,1509048791.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:12.061Z,1509048792.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:12.468Z,1509048792.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:12.875Z,1509048792.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:13.264Z,1509048793.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:13.653Z,1509048793.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:14.059Z,1509048794.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:14.464Z,1509048794.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:14.863Z,1509048794.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:15.260Z,1509048795.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:15.664Z,1509048795.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:16.065Z,1509048796.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:16.465Z,1509048796.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:16.877Z,1509048796.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:17.259Z,1509048797.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:17.660Z,1509048797.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:18.065Z,1509048798.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:18.459Z,1509048798.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:18.836Z,1509048798.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:19.312Z,1509048799.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:19.661Z,1509048799.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:20.078Z,1509048800.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:20.467Z,1509048800.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:20.895Z,1509048800.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:21.252Z,1509048801.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:21.708Z,1509048801.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:22.079Z,1509048802.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:22.478Z,1509048802.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:22.882Z,1509048802.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:23.255Z,1509048803.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:23.660Z,1509048803.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:24.063Z,1509048804.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:24.461Z,1509048804.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:24.861Z,1509048804.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:25.256Z,1509048805.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:25.652Z,1509048805.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:26.059Z,1509048806.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:26.456Z,1509048806.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:26.863Z,1509048806.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:27.267Z,1509048807.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:27.657Z,1509048807.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:28.053Z,1509048808.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:28.443Z,1509048808.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:28.863Z,1509048808.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:29.262Z,1509048809.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:29.657Z,1509048809.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:30.058Z,1509048810.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:30.457Z,1509048810.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:30.860Z,1509048810.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:31.281Z,1509048811.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:31.652Z,1509048811.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:32.050Z,1509048812.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:32.471Z,1509048812.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:32.863Z,1509048812.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:33.263Z,1509048813.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:33.707Z,1509048813.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:34.054Z,1509048814.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:34.460Z,1509048814.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:34.885Z,1509048814.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:35.275Z,1509048815.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:35.689Z,1509048815.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:36.056Z,1509048816.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:36.503Z,1509048816.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:36.896Z,1509048816.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:37.249Z,1509048817.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:37.651Z,1509048817.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:38.053Z,1509048818.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:38.464Z,1509048818.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:38.855Z,1509048818.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:39.263Z,1509048819.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:39.661Z,1509048819.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:40.065Z,1509048820.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:40.462Z,1509048820.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:40.851Z,1509048820.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:41.260Z,1509048821.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:41.666Z,1509048821.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:42.037Z,1509048822.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:42.441Z,1509048822.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:42.878Z,1509048822.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:43.263Z,1509048823.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:43.660Z,1509048823.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:44.071Z,1509048824.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:44.460Z,1509048824.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:44.865Z,1509048824.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:45.257Z,1509048825.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:45.656Z,1509048825.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:46.058Z,1509048826.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:46.467Z,1509048826.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:46.858Z,1509048826.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:47.260Z,1509048827.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:47.681Z,1509048827.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:48.059Z,1509048828.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:48.476Z,1509048828.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:48.922Z,1509048828.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:49.261Z,1509048829.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:49.699Z,1509048829.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:50.065Z,1509048830.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:50.484Z,1509048830.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:50.886Z,1509048830.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:51.382Z,1509048831.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:51.790Z,1509048831.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:52.214Z,1509048832.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:52.597Z,1509048832.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:53.078Z,1509048833.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:53.392Z,1509048833.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:53.786Z,1509048833.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:54.208Z,1509048834.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:54.564Z,1509048834.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:55.056Z,1509048835.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:55.373Z,1509048835.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:55.727Z,1509048835.727 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:13:55.811Z,1509048835.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:56.212Z,1509048836.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:56.620Z,1509048836.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:57.056Z,1509048837.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:57.404Z,1509048837.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:57.802Z,1509048837.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:58.213Z,1509048838.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:58.589Z,1509048838.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:59.044Z,1509048839.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:59.394Z,1509048839.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:13:59.793Z,1509048839.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:00.209Z,1509048840.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:00.613Z,1509048840.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:01.073Z,1509048841.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:01.397Z,1509048841.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:01.794Z,1509048841.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:02.206Z,1509048842.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:02.581Z,1509048842.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:03.097Z,1509048843.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:03.399Z,1509048843.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:03.403Z,1509048843.403 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:03.846Z,1509048843.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:04.200Z,1509048844.200 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:04.212Z,1509048844.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:04.605Z,1509048844.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:04.608Z,1509048844.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:05.051Z,1509048845.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:05.398Z,1509048845.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:05.401Z,1509048845.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:05.800Z,1509048845.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:05.803Z,1509048845.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:06.204Z,1509048846.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:06.596Z,1509048846.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:06.600Z,1509048846.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:07.029Z,1509048847.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:07.394Z,1509048847.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:07.419Z,1509048847.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:07.799Z,1509048847.799 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:07.800Z,1509048847.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:08.213Z,1509048848.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:08.592Z,1509048848.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:08.614Z,1509048848.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:08.996Z,1509048848.996 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:09.054Z,1509048849.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:09.432Z,1509048849.432 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:09.666Z,1509048849.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:10.047Z,1509048850.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:10.231Z,1509048850.231 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:10.451Z,1509048850.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:10.634Z,1509048850.634 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:10.846Z,1509048850.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:11.249Z,1509048851.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:11.420Z,1509048851.420 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:11.642Z,1509048851.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:12.044Z,1509048852.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:12.217Z,1509048852.217 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:12.441Z,1509048852.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:12.621Z,1509048852.621 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:12.847Z,1509048852.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:13.260Z,1509048853.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:13.407Z,1509048853.407 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:13.637Z,1509048853.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:14.037Z,1509048854.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:14.204Z,1509048854.204 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:14.440Z,1509048854.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:14.608Z,1509048854.608 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:14.837Z,1509048854.837 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:14.837Z,1509048854.837 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 9
2017-10-26T20:14:14.837Z,1509048854.837 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:14:14.841Z,1509048854.841 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:14.841Z,1509048854.841 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 9
2017-10-26T20:14:14.841Z,1509048854.841 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:14:14.886Z,1509048854.886 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:14:14.887Z,1509048854.887 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:14:15.346Z,1509048855.346 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:14:15.346Z,1509048855.346 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 9
2017-10-26T20:14:15.347Z,1509048855.347 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:14:15.347Z,1509048855.347 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 9
2017-10-26T20:14:15.402Z,1509048855.402 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:15.675Z,1509048855.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:14:15.676Z,1509048855.676 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:14:15.676Z,1509048855.676 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:14:15.695Z,1509048855.695 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:14:15.695Z,1509048855.695 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:14:15.696Z,1509048855.696 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:14:16.042Z,1509048856.042 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T20:14:16.042Z,1509048856.042 [BPC1] Data Fault, FailCount= 1
2017-10-26T20:14:16.042Z,1509048856.042 [BPC1](ERROR): Data Fault
2017-10-26T20:14:16.051Z,1509048856.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:16.108Z,1509048856.108 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T20:14:16.199Z,1509048856.199 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:16.467Z,1509048856.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:16.608Z,1509048856.608 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:16.836Z,1509048856.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:17.243Z,1509048857.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:17.326Z,1509048857.326 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:14:17.326Z,1509048857.326 [BPC1] No Fault, FailCount= 1
2017-10-26T20:14:17.397Z,1509048857.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:17.696Z,1509048857.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:18.057Z,1509048858.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:18.194Z,1509048858.194 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:18.468Z,1509048858.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:18.603Z,1509048858.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:18.845Z,1509048858.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:19.262Z,1509048859.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:19.600Z,1509048859.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:19.628Z,1509048859.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:19.753Z,1509048859.753 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T20:14:20.064Z,1509048860.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:20.393Z,1509048860.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:20.441Z,1509048860.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:20.868Z,1509048860.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:21.191Z,1509048861.191 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:21.253Z,1509048861.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:21.595Z,1509048861.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:21.654Z,1509048861.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:22.057Z,1509048862.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:22.392Z,1509048862.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:22.447Z,1509048862.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:22.797Z,1509048862.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:22.850Z,1509048862.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:23.275Z,1509048863.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:23.410Z,1509048863.410 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:23.644Z,1509048863.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:24.082Z,1509048864.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:24.207Z,1509048864.207 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:24.448Z,1509048864.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:24.612Z,1509048864.612 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:24.876Z,1509048864.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:25.244Z,1509048865.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:25.405Z,1509048865.405 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:25.659Z,1509048865.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:25.810Z,1509048865.810 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:26.072Z,1509048866.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:26.485Z,1509048866.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:26.599Z,1509048866.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:26.848Z,1509048866.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:27.263Z,1509048867.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:27.392Z,1509048867.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:27.652Z,1509048867.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:27.797Z,1509048867.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:28.052Z,1509048868.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:28.448Z,1509048868.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:28.590Z,1509048868.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:28.860Z,1509048868.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:29.270Z,1509048869.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:29.390Z,1509048869.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:29.643Z,1509048869.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:29.796Z,1509048869.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:30.048Z,1509048870.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:30.491Z,1509048870.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:30.589Z,1509048870.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:30.847Z,1509048870.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:31.301Z,1509048871.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:31.387Z,1509048871.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:31.646Z,1509048871.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:31.791Z,1509048871.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:32.069Z,1509048872.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:32.466Z,1509048872.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:32.591Z,1509048872.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:32.861Z,1509048872.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:33.329Z,1509048873.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:33.386Z,1509048873.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:33.644Z,1509048873.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:33.790Z,1509048873.790 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:34.039Z,1509048874.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:34.448Z,1509048874.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:34.583Z,1509048874.583 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:34.844Z,1509048874.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:35.247Z,1509048875.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:35.381Z,1509048875.381 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:35.669Z,1509048875.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:35.787Z,1509048875.787 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:36.050Z,1509048876.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:36.437Z,1509048876.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:36.583Z,1509048876.583 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:36.841Z,1509048876.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:37.243Z,1509048877.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:37.381Z,1509048877.381 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:37.694Z,1509048877.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:37.788Z,1509048877.788 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:38.075Z,1509048878.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:38.441Z,1509048878.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:38.582Z,1509048878.582 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:38.850Z,1509048878.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:39.249Z,1509048879.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:39.381Z,1509048879.381 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:39.654Z,1509048879.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:39.784Z,1509048879.784 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:40.051Z,1509048880.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:40.445Z,1509048880.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:40.583Z,1509048880.583 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:40.864Z,1509048880.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:41.277Z,1509048881.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:41.382Z,1509048881.382 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:41.665Z,1509048881.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:41.787Z,1509048881.787 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:42.048Z,1509048882.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:42.473Z,1509048882.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:42.584Z,1509048882.584 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:42.859Z,1509048882.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:42.990Z,1509048882.990 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:43.303Z,1509048883.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:43.410Z,1509048883.410 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:43.653Z,1509048883.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:44.048Z,1509048884.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:44.208Z,1509048884.208 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:44.523Z,1509048884.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:44.627Z,1509048884.627 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:44.838Z,1509048884.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:45.254Z,1509048885.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:45.400Z,1509048885.400 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:45.679Z,1509048885.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:46.046Z,1509048886.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:46.198Z,1509048886.198 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:46.491Z,1509048886.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:46.602Z,1509048886.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:46.859Z,1509048886.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:47.278Z,1509048887.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:47.395Z,1509048887.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:47.634Z,1509048887.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:47.800Z,1509048887.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:48.043Z,1509048888.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:48.438Z,1509048888.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:48.593Z,1509048888.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:48.838Z,1509048888.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:49.248Z,1509048889.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:49.390Z,1509048889.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:49.654Z,1509048889.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:49.795Z,1509048889.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:50.048Z,1509048890.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:50.448Z,1509048890.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:50.593Z,1509048890.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:50.846Z,1509048890.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:51.249Z,1509048891.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:51.389Z,1509048891.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:51.655Z,1509048891.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:51.794Z,1509048891.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:52.040Z,1509048892.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:52.440Z,1509048892.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:52.592Z,1509048892.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:52.841Z,1509048892.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:53.255Z,1509048893.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:53.391Z,1509048893.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:53.679Z,1509048893.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:54.054Z,1509048894.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:54.188Z,1509048894.188 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:54.481Z,1509048894.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:54.599Z,1509048894.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:54.883Z,1509048894.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:55.263Z,1509048895.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:55.392Z,1509048895.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:55.664Z,1509048895.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:55.797Z,1509048895.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:55.997Z,1509048895.997 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:14:56.054Z,1509048896.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:56.451Z,1509048896.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:56.591Z,1509048896.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:56.839Z,1509048896.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:57.273Z,1509048897.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:57.391Z,1509048897.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:57.651Z,1509048897.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:57.795Z,1509048897.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:58.104Z,1509048898.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:58.437Z,1509048898.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:58.593Z,1509048898.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:58.847Z,1509048898.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:59.292Z,1509048899.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:59.390Z,1509048899.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:14:59.697Z,1509048899.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:14:59.795Z,1509048899.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:00.060Z,1509048900.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:00.478Z,1509048900.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:00.592Z,1509048900.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:00.860Z,1509048900.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:01.272Z,1509048901.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:01.391Z,1509048901.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:01.675Z,1509048901.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:01.794Z,1509048901.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:02.041Z,1509048902.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:02.436Z,1509048902.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:02.592Z,1509048902.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:02.872Z,1509048902.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:03.254Z,1509048903.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:03.392Z,1509048903.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:03.639Z,1509048903.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:03.797Z,1509048903.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:04.059Z,1509048904.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:04.440Z,1509048904.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:04.591Z,1509048904.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:04.860Z,1509048904.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:05.267Z,1509048905.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:05.387Z,1509048905.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:05.637Z,1509048905.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:05.793Z,1509048905.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:06.057Z,1509048906.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:06.439Z,1509048906.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:06.589Z,1509048906.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:06.843Z,1509048906.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:07.254Z,1509048907.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:07.386Z,1509048907.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:07.645Z,1509048907.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:07.792Z,1509048907.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:08.049Z,1509048908.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:08.453Z,1509048908.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:08.588Z,1509048908.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:09.039Z,1509048909.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:09.355Z,1509048909.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:09.391Z,1509048909.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:09.747Z,1509048909.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:09.802Z,1509048909.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:10.153Z,1509048910.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:10.573Z,1509048910.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:10.599Z,1509048910.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:11.039Z,1509048911.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:11.374Z,1509048911.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:11.393Z,1509048911.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:11.760Z,1509048911.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:11.797Z,1509048911.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:12.158Z,1509048912.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:12.554Z,1509048912.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:12.591Z,1509048912.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:13.056Z,1509048913.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:13.377Z,1509048913.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:13.388Z,1509048913.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:13.792Z,1509048913.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:13.818Z,1509048913.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:14.158Z,1509048914.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:14.582Z,1509048914.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:14.590Z,1509048914.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:15.027Z,1509048915.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:15.385Z,1509048915.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:15.387Z,1509048915.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:15.754Z,1509048915.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:15.792Z,1509048915.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:16.240Z,1509048916.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:16.559Z,1509048916.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:16.585Z,1509048916.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:16.996Z,1509048916.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:17.361Z,1509048917.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:17.384Z,1509048917.384 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:17.749Z,1509048917.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:17.791Z,1509048917.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:18.196Z,1509048918.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:18.566Z,1509048918.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:18.588Z,1509048918.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:19.021Z,1509048919.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:19.342Z,1509048919.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:19.392Z,1509048919.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:19.753Z,1509048919.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:19.798Z,1509048919.798 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:20.289Z,1509048920.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:20.595Z,1509048920.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:20.700Z,1509048920.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:20.000Z,1509048921.000 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:21.072Z,1509048921.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:21.404Z,1509048921.404 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:21.481Z,1509048921.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:21.887Z,1509048921.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:22.202Z,1509048922.202 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:22.282Z,1509048922.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:22.606Z,1509048922.606 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:22.674Z,1509048922.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:23.085Z,1509048923.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:23.399Z,1509048923.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:23.485Z,1509048923.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:23.804Z,1509048923.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:23.867Z,1509048923.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:24.293Z,1509048924.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:24.597Z,1509048924.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:24.689Z,1509048924.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:25.068Z,1509048925.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:25.394Z,1509048925.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:25.477Z,1509048925.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:25.878Z,1509048925.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:26.195Z,1509048926.195 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:26.294Z,1509048926.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:26.600Z,1509048926.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:26.687Z,1509048926.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:27.087Z,1509048927.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:27.382Z,1509048927.382 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:27.483Z,1509048927.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:27.928Z,1509048927.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:28.179Z,1509048928.179 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:28.289Z,1509048928.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:28.599Z,1509048928.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:28.710Z,1509048928.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:29.083Z,1509048929.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:29.392Z,1509048929.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:29.487Z,1509048929.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:29.904Z,1509048929.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:30.194Z,1509048930.194 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:30.294Z,1509048930.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:30.598Z,1509048930.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:30.709Z,1509048930.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:31.106Z,1509048931.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:31.392Z,1509048931.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:31.474Z,1509048931.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:31.878Z,1509048931.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:32.190Z,1509048932.190 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:32.284Z,1509048932.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:32.597Z,1509048932.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:32.683Z,1509048932.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:33.075Z,1509048933.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:33.389Z,1509048933.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:33.478Z,1509048933.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:33.878Z,1509048933.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:34.189Z,1509048934.189 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:34.291Z,1509048934.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:34.601Z,1509048934.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:34.684Z,1509048934.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:35.065Z,1509048935.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:35.390Z,1509048935.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:35.472Z,1509048935.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:35.873Z,1509048935.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:36.188Z,1509048936.188 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:36.271Z,1509048936.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:36.596Z,1509048936.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:36.680Z,1509048936.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:37.079Z,1509048937.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:37.386Z,1509048937.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:37.479Z,1509048937.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:37.876Z,1509048937.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:38.194Z,1509048938.194 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:38.301Z,1509048938.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:38.599Z,1509048938.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:38.677Z,1509048938.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:39.069Z,1509048939.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:39.385Z,1509048939.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:39.491Z,1509048939.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:39.887Z,1509048939.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:40.184Z,1509048940.184 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:40.280Z,1509048940.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:40.598Z,1509048940.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:40.688Z,1509048940.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:41.086Z,1509048941.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:41.396Z,1509048941.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:41.496Z,1509048941.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:41.800Z,1509048941.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:41.880Z,1509048941.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:42.280Z,1509048942.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:42.593Z,1509048942.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:42.677Z,1509048942.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:43.097Z,1509048943.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:43.394Z,1509048943.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:43.528Z,1509048943.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:43.880Z,1509048943.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:44.195Z,1509048944.195 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:44.280Z,1509048944.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:44.600Z,1509048944.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:44.679Z,1509048944.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:45.112Z,1509048945.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:45.385Z,1509048945.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:45.491Z,1509048945.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:45.922Z,1509048945.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:46.192Z,1509048946.192 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:46.316Z,1509048946.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:46.601Z,1509048946.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:46.686Z,1509048946.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:47.078Z,1509048947.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:47.393Z,1509048947.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:47.483Z,1509048947.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:47.883Z,1509048947.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:48.190Z,1509048948.190 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:48.292Z,1509048948.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:48.643Z,1509048948.643 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:48.677Z,1509048948.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:49.073Z,1509048949.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:49.379Z,1509048949.379 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:49.475Z,1509048949.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:49.876Z,1509048949.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:50.178Z,1509048950.178 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:50.276Z,1509048950.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:50.598Z,1509048950.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:50.688Z,1509048950.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:51.086Z,1509048951.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:51.395Z,1509048951.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:51.491Z,1509048951.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:51.870Z,1509048951.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:52.195Z,1509048952.195 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:52.302Z,1509048952.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:52.600Z,1509048952.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:52.710Z,1509048952.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:53.114Z,1509048953.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:53.402Z,1509048953.402 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:53.489Z,1509048953.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:53.806Z,1509048953.806 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:53.877Z,1509048953.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:54.279Z,1509048954.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:54.600Z,1509048954.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:54.682Z,1509048954.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:55.074Z,1509048955.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:55.393Z,1509048955.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:55.478Z,1509048955.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:55.874Z,1509048955.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:56.191Z,1509048956.191 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:56.276Z,1509048956.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:56.601Z,1509048956.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:56.627Z,1509048956.627 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:15:56.684Z,1509048956.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:57.082Z,1509048957.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:57.392Z,1509048957.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:57.458Z,1509048957.458 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T20:15:57.458Z,1509048957.458 [BPC1] Data Fault, FailCount= 1
2017-10-26T20:15:57.458Z,1509048957.458 [BPC1](ERROR): Data Fault
2017-10-26T20:15:57.502Z,1509048957.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:57.617Z,1509048957.617 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T20:15:57.898Z,1509048957.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:58.191Z,1509048958.191 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:58.282Z,1509048958.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:58.598Z,1509048958.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:58.675Z,1509048958.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:58.739Z,1509048958.739 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:15:58.739Z,1509048958.739 [BPC1] No Fault, FailCount= 1
2017-10-26T20:15:59.148Z,1509048959.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:59.391Z,1509048959.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:59.484Z,1509048959.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:15:59.796Z,1509048959.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:15:59.922Z,1509048959.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:00.273Z,1509048960.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:00.591Z,1509048960.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:00.671Z,1509048960.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:01.096Z,1509048961.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:01.386Z,1509048961.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:01.481Z,1509048961.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:01.791Z,1509048961.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:01.898Z,1509048961.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:02.282Z,1509048962.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:02.584Z,1509048962.584 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:02.695Z,1509048962.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:03.110Z,1509048963.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:03.381Z,1509048963.381 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:03.473Z,1509048963.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:03.788Z,1509048963.788 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:03.888Z,1509048963.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:04.282Z,1509048964.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:04.587Z,1509048964.587 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:04.694Z,1509048964.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:04.994Z,1509048964.994 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:05.113Z,1509048965.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:05.452Z,1509048965.452 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:05.488Z,1509048965.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:05.985Z,1509048965.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:06.250Z,1509048966.250 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:06.381Z,1509048966.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:06.654Z,1509048966.654 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:06.786Z,1509048966.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:07.207Z,1509048967.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:07.443Z,1509048967.443 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:07.567Z,1509048967.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:07.982Z,1509048967.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:08.241Z,1509048968.241 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:08.383Z,1509048968.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:08.645Z,1509048968.645 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:08.780Z,1509048968.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:09.190Z,1509048969.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:09.423Z,1509048969.423 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:09.566Z,1509048969.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:09.967Z,1509048969.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:10.220Z,1509048970.220 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:10.374Z,1509048970.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:10.625Z,1509048970.625 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:10.768Z,1509048970.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:11.174Z,1509048971.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:11.422Z,1509048971.422 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:11.572Z,1509048971.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:11.826Z,1509048971.826 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:11.973Z,1509048971.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:12.438Z,1509048972.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:12.596Z,1509048972.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:12.764Z,1509048972.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:13.239Z,1509048973.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:13.391Z,1509048973.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:13.576Z,1509048973.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:13.797Z,1509048973.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:14.016Z,1509048974.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:14.405Z,1509048974.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:14.591Z,1509048974.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:14.769Z,1509048974.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:15.208Z,1509048975.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:15.388Z,1509048975.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:15.577Z,1509048975.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:15.792Z,1509048975.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:15.981Z,1509048975.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:16.362Z,1509048976.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:16.588Z,1509048976.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:16.766Z,1509048976.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:17.216Z,1509048977.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:17.387Z,1509048977.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:17.568Z,1509048977.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:17.792Z,1509048977.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:17.974Z,1509048977.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:18.376Z,1509048978.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:18.589Z,1509048978.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:18.773Z,1509048978.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:19.206Z,1509048979.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:19.386Z,1509048979.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:19.565Z,1509048979.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:19.792Z,1509048979.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:19.978Z,1509048979.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:20.364Z,1509048980.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:20.584Z,1509048980.584 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:21.053Z,1509048981.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:21.346Z,1509048981.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:21.387Z,1509048981.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:21.744Z,1509048981.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:21.798Z,1509048981.798 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:22.150Z,1509048982.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:22.551Z,1509048982.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:22.595Z,1509048982.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:22.945Z,1509048982.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:23.359Z,1509048983.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:23.396Z,1509048983.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:23.772Z,1509048983.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:23.801Z,1509048983.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:24.170Z,1509048984.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:24.543Z,1509048984.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:24.594Z,1509048984.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:25.009Z,1509048985.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:25.355Z,1509048985.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:25.391Z,1509048985.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:25.749Z,1509048985.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:25.796Z,1509048985.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:16:26.231Z,1509048986.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:26.555Z,1509048986.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:27.008Z,1509048987.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:27.369Z,1509048987.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:27.800Z,1509048987.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:28.209Z,1509048988.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:28.573Z,1509048988.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:28.943Z,1509048988.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:29.425Z,1509048989.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:29.762Z,1509048989.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:30.199Z,1509048990.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:30.544Z,1509048990.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:30.945Z,1509048990.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:31.358Z,1509048991.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:31.800Z,1509048991.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:32.215Z,1509048992.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:32.547Z,1509048992.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:32.945Z,1509048992.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:33.350Z,1509048993.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:33.774Z,1509048993.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:34.161Z,1509048994.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:34.543Z,1509048994.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:34.941Z,1509048994.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:35.359Z,1509048995.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:35.758Z,1509048995.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:36.139Z,1509048996.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:36.546Z,1509048996.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:36.945Z,1509048996.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:37.376Z,1509048997.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:37.764Z,1509048997.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:38.145Z,1509048998.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:38.576Z,1509048998.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:38.948Z,1509048998.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:39.353Z,1509048999.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:39.748Z,1509048999.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:40.202Z,1509049000.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:40.611Z,1509049000.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:40.952Z,1509049000.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:41.353Z,1509049001.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:41.801Z,1509049001.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:42.159Z,1509049002.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:42.587Z,1509049002.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:43.004Z,1509049003.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:43.405Z,1509049003.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:43.770Z,1509049003.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:44.160Z,1509049004.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:44.557Z,1509049004.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:44.946Z,1509049004.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:45.357Z,1509049005.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:45.765Z,1509049005.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:46.151Z,1509049006.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:46.548Z,1509049006.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:46.951Z,1509049006.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:47.352Z,1509049007.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:47.782Z,1509049007.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:48.181Z,1509049008.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:48.560Z,1509049008.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:49.063Z,1509049009.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:49.357Z,1509049009.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:49.785Z,1509049009.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:50.155Z,1509049010.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:50.549Z,1509049010.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:51.028Z,1509049011.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:51.374Z,1509049011.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:51.774Z,1509049011.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:52.166Z,1509049012.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:52.553Z,1509049012.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:53.054Z,1509049013.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:53.373Z,1509049013.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:53.765Z,1509049013.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:54.145Z,1509049014.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:54.546Z,1509049014.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:55.071Z,1509049015.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:55.357Z,1509049015.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:55.737Z,1509049015.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:56.136Z,1509049016.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:56.558Z,1509049016.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:56.901Z,1509049016.901 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:16:57.029Z,1509049017.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:57.351Z,1509049017.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:57.767Z,1509049017.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:58.143Z,1509049018.143 [BPC1](ERROR): Failed to receive battery data
2017-10-26T20:16:58.143Z,1509049018.143 [BPC1] Communications Fault, FailCount= 1
2017-10-26T20:16:58.143Z,1509049018.143 [BPC1](ERROR): Communications Fault
2017-10-26T20:16:58.153Z,1509049018.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:58.292Z,1509049018.292 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T20:16:58.568Z,1509049018.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:58.951Z,1509049018.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:59.345Z,1509049019.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:16:59.410Z,1509049019.410 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:16:59.410Z,1509049019.410 [BPC1] No Fault, FailCount= 1
2017-10-26T20:16:59.807Z,1509049019.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:00.154Z,1509049020.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:00.552Z,1509049020.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:01.033Z,1509049021.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:01.339Z,1509049021.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:01.744Z,1509049021.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:02.200Z,1509049022.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:02.548Z,1509049022.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:03.008Z,1509049023.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:03.363Z,1509049023.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:03.735Z,1509049023.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:04.209Z,1509049024.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:04.544Z,1509049024.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:05.082Z,1509049025.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:05.381Z,1509049025.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:05.761Z,1509049025.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:06.150Z,1509049026.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:06.554Z,1509049026.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:07.029Z,1509049027.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:07.374Z,1509049027.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:07.741Z,1509049027.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:08.147Z,1509049028.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:08.598Z,1509049028.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:09.032Z,1509049029.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:09.353Z,1509049029.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:09.760Z,1509049029.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:10.211Z,1509049030.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:10.573Z,1509049030.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:11.038Z,1509049031.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:11.371Z,1509049031.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:11.750Z,1509049031.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:12.201Z,1509049032.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:12.552Z,1509049032.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:12.592Z,1509049032.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:12.945Z,1509049032.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:13.366Z,1509049033.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:13.395Z,1509049033.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:13.756Z,1509049033.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:13.799Z,1509049033.799 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:14.140Z,1509049034.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:14.583Z,1509049034.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:15.066Z,1509049035.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:15.367Z,1509049035.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:15.754Z,1509049035.754 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:15.755Z,1509049035.755 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 10
2017-10-26T20:17:15.755Z,1509049035.755 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:17:15.763Z,1509049035.763 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:15.763Z,1509049035.763 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 10
2017-10-26T20:17:15.763Z,1509049035.763 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:17:15.875Z,1509049035.875 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:17:15.876Z,1509049035.876 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:17:16.267Z,1509049036.267 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:17:16.267Z,1509049036.267 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 10
2017-10-26T20:17:16.268Z,1509049036.268 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:17:16.268Z,1509049036.268 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 10
2017-10-26T20:17:16.549Z,1509049036.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:17:16.549Z,1509049036.549 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:17:16.554Z,1509049036.554 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:17:16.556Z,1509049036.556 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:17:16.557Z,1509049036.557 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:17:16.557Z,1509049036.557 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:17:17.018Z,1509049037.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:17.364Z,1509049037.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:17.756Z,1509049037.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:18.159Z,1509049038.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:18.543Z,1509049038.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:19.043Z,1509049039.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:19.350Z,1509049039.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:19.827Z,1509049039.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:20.258Z,1509049040.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:20.639Z,1509049040.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:21.096Z,1509049041.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:21.465Z,1509049041.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:21.816Z,1509049041.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:22.241Z,1509049042.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:22.624Z,1509049042.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:23.074Z,1509049043.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:23.424Z,1509049043.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:23.832Z,1509049043.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:24.240Z,1509049044.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:24.625Z,1509049044.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:25.082Z,1509049045.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:25.450Z,1509049045.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:25.833Z,1509049045.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:26.247Z,1509049046.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:26.631Z,1509049046.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:27.092Z,1509049047.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:27.440Z,1509049047.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:27.851Z,1509049047.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:28.246Z,1509049048.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:28.617Z,1509049048.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:29.145Z,1509049049.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:29.533Z,1509049049.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:29.910Z,1509049049.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:30.351Z,1509049050.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:30.705Z,1509049050.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:31.133Z,1509049051.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:31.560Z,1509049051.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:31.922Z,1509049051.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:32.327Z,1509049052.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:32.705Z,1509049052.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:33.182Z,1509049053.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:33.524Z,1509049053.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:33.922Z,1509049053.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:34.304Z,1509049054.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:34.713Z,1509049054.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:35.126Z,1509049055.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:35.529Z,1509049055.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:35.908Z,1509049055.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:36.309Z,1509049056.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:36.706Z,1509049056.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:37.117Z,1509049057.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:37.494Z,1509049057.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:37.900Z,1509049057.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:38.322Z,1509049058.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:38.713Z,1509049058.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:39.108Z,1509049059.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:39.390Z,1509049059.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:39.508Z,1509049059.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:39.917Z,1509049059.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:40.073Z,1509049060.073 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:40.320Z,1509049060.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:40.716Z,1509049060.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:40.869Z,1509049060.869 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:41.130Z,1509049061.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:41.406Z,1509049061.406 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:41.517Z,1509049061.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:41.903Z,1509049061.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:42.203Z,1509049062.203 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:42.305Z,1509049062.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:42.761Z,1509049062.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:43.002Z,1509049063.002 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:43.112Z,1509049063.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:43.421Z,1509049063.421 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:43.555Z,1509049063.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:43.928Z,1509049063.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:44.218Z,1509049064.218 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:44.295Z,1509049064.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:44.622Z,1509049064.622 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:44.744Z,1509049064.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:45.129Z,1509049065.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:45.416Z,1509049065.416 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:45.546Z,1509049065.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:45.820Z,1509049065.820 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:45.947Z,1509049065.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:46.312Z,1509049066.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:46.597Z,1509049066.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:46.714Z,1509049066.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:47.162Z,1509049067.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:47.391Z,1509049067.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:47.508Z,1509049067.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:47.795Z,1509049067.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:47.914Z,1509049067.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:48.317Z,1509049068.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:48.588Z,1509049068.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:48.710Z,1509049068.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:49.112Z,1509049069.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:49.389Z,1509049069.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:49.516Z,1509049069.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:49.795Z,1509049069.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:49.901Z,1509049069.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:50.308Z,1509049070.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:50.588Z,1509049070.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:50.724Z,1509049070.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:51.112Z,1509049071.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:51.385Z,1509049071.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:51.515Z,1509049071.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:51.790Z,1509049071.790 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:51.917Z,1509049071.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:52.318Z,1509049072.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:52.585Z,1509049072.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:52.716Z,1509049072.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:53.101Z,1509049073.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:53.384Z,1509049073.384 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:53.504Z,1509049073.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:53.789Z,1509049073.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:53.945Z,1509049073.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:54.306Z,1509049074.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:54.582Z,1509049074.582 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:54.702Z,1509049074.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:55.122Z,1509049075.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:55.509Z,1509049075.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:55.600Z,1509049075.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:55.931Z,1509049075.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:56.371Z,1509049076.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:56.393Z,1509049076.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:56.661Z,1509049076.661 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:17:56.720Z,1509049076.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:57.100Z,1509049077.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:57.191Z,1509049077.191 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:57.537Z,1509049077.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:57.599Z,1509049077.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:57.909Z,1509049077.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:58.305Z,1509049078.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:58.392Z,1509049078.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:58.750Z,1509049078.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:59.109Z,1509049079.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:59.190Z,1509049079.190 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:59.557Z,1509049079.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:17:59.598Z,1509049079.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:17:59.955Z,1509049079.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:00.295Z,1509049080.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:00.391Z,1509049080.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:00.703Z,1509049080.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:01.120Z,1509049081.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:01.189Z,1509049081.189 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:01.519Z,1509049081.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:01.593Z,1509049081.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:01.919Z,1509049081.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:02.308Z,1509049082.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:02.390Z,1509049082.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:02.714Z,1509049082.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:02.795Z,1509049082.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:03.128Z,1509049083.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:03.416Z,1509049083.416 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:03.510Z,1509049083.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:03.907Z,1509049083.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:04.213Z,1509049084.213 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:04.310Z,1509049084.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:04.617Z,1509049084.617 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:04.712Z,1509049084.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:05.123Z,1509049085.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:05.517Z,1509049085.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:05.599Z,1509049085.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:05.907Z,1509049085.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:06.309Z,1509049086.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:06.393Z,1509049086.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:06.715Z,1509049086.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:07.128Z,1509049087.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:07.191Z,1509049087.191 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:07.508Z,1509049087.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:07.599Z,1509049087.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:07.940Z,1509049087.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:08.307Z,1509049088.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:08.391Z,1509049088.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:08.717Z,1509049088.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:09.111Z,1509049089.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:09.189Z,1509049089.189 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:09.519Z,1509049089.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:09.597Z,1509049089.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:09.904Z,1509049089.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:10.304Z,1509049090.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:10.390Z,1509049090.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:10.752Z,1509049090.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:11.111Z,1509049091.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:11.190Z,1509049091.190 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:11.517Z,1509049091.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:11.592Z,1509049091.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:11.921Z,1509049091.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:12.344Z,1509049092.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:12.390Z,1509049092.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:12.700Z,1509049092.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:12.795Z,1509049092.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:13.137Z,1509049093.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:13.407Z,1509049093.407 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:13.512Z,1509049093.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:13.938Z,1509049093.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:14.204Z,1509049094.204 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:14.348Z,1509049094.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:14.609Z,1509049094.609 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:14.714Z,1509049094.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:15.116Z,1509049095.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:15.398Z,1509049095.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:15.517Z,1509049095.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:15.920Z,1509049095.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:16.196Z,1509049096.196 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:16.331Z,1509049096.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:16.600Z,1509049096.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:16.713Z,1509049096.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:17.099Z,1509049097.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:17.386Z,1509049097.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:17.506Z,1509049097.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:17.905Z,1509049097.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:18.189Z,1509049098.189 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:18.319Z,1509049098.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:18.599Z,1509049098.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:18.722Z,1509049098.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:19.106Z,1509049099.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:19.392Z,1509049099.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:19.511Z,1509049099.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:19.915Z,1509049099.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:20.191Z,1509049100.191 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:20.322Z,1509049100.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:20.598Z,1509049100.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:20.718Z,1509049100.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:21.134Z,1509049101.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:21.392Z,1509049101.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:21.508Z,1509049101.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:21.919Z,1509049101.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:22.191Z,1509049102.191 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:22.304Z,1509049102.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:22.601Z,1509049102.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:22.809Z,1509049102.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:23.221Z,1509049103.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:23.395Z,1509049103.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:23.601Z,1509049103.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:24.009Z,1509049104.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:24.193Z,1509049104.193 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:24.421Z,1509049104.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:24.600Z,1509049104.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:24.819Z,1509049104.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:25.244Z,1509049105.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:25.398Z,1509049105.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:25.619Z,1509049105.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:26.040Z,1509049106.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:26.195Z,1509049106.195 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:26.414Z,1509049106.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:26.599Z,1509049106.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:26.815Z,1509049106.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:27.265Z,1509049107.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:27.389Z,1509049107.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:27.594Z,1509049107.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:28.040Z,1509049108.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:28.188Z,1509049108.188 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:28.434Z,1509049108.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:28.599Z,1509049108.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:28.795Z,1509049108.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:29.220Z,1509049109.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:29.393Z,1509049109.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:29.600Z,1509049109.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:30.008Z,1509049110.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:30.193Z,1509049110.193 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:30.404Z,1509049110.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:30.599Z,1509049110.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:30.810Z,1509049110.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:31.237Z,1509049111.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:31.395Z,1509049111.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:31.604Z,1509049111.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:31.800Z,1509049111.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:32.004Z,1509049112.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:32.410Z,1509049112.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:32.593Z,1509049112.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:32.808Z,1509049112.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:33.216Z,1509049113.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:33.386Z,1509049113.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:33.611Z,1509049113.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:33.998Z,1509049113.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:34.185Z,1509049114.185 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:34.391Z,1509049114.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:34.596Z,1509049114.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:34.800Z,1509049114.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:35.241Z,1509049115.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:35.381Z,1509049115.381 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:35.611Z,1509049115.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:36.002Z,1509049116.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:36.184Z,1509049116.184 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:36.401Z,1509049116.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:36.599Z,1509049116.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:36.787Z,1509049116.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:37.252Z,1509049117.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:37.392Z,1509049117.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:37.607Z,1509049117.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:37.797Z,1509049117.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:38.206Z,1509049118.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:38.590Z,1509049118.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:38.599Z,1509049118.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:39.068Z,1509049119.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:39.391Z,1509049119.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:39.430Z,1509049119.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:39.791Z,1509049119.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:39.796Z,1509049119.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:40.231Z,1509049120.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:40.592Z,1509049120.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:40.663Z,1509049120.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:41.042Z,1509049121.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:41.386Z,1509049121.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:41.415Z,1509049121.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:41.791Z,1509049121.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:41.833Z,1509049121.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:42.217Z,1509049122.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:42.588Z,1509049122.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:42.639Z,1509049122.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:43.044Z,1509049123.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:43.386Z,1509049123.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:43.440Z,1509049123.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:43.792Z,1509049123.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:43.816Z,1509049123.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:44.214Z,1509049124.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:44.586Z,1509049124.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:44.596Z,1509049124.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:45.077Z,1509049125.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:45.397Z,1509049125.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:45.402Z,1509049125.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:45.823Z,1509049125.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:46.194Z,1509049126.194 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:46.222Z,1509049126.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:46.607Z,1509049126.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:46.611Z,1509049126.611 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:47.070Z,1509049127.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:47.404Z,1509049127.404 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:47.427Z,1509049127.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:47.791Z,1509049127.791 [PNI_TCM](ERROR): CRC does not match. Expected:0x10044 got:0x16757
2017-10-26T20:18:47.809Z,1509049127.809 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:47.845Z,1509049127.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:48.222Z,1509049128.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:48.598Z,1509049128.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:48.610Z,1509049128.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:49.049Z,1509049129.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:49.391Z,1509049129.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:49.419Z,1509049129.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:49.796Z,1509049129.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:49.813Z,1509049129.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:50.210Z,1509049130.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:50.593Z,1509049130.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:50.597Z,1509049130.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:51.059Z,1509049131.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:51.390Z,1509049131.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:51.394Z,1509049131.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:51.795Z,1509049131.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:51.817Z,1509049131.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:52.202Z,1509049132.202 [PNI_TCM](ERROR): CRC does not match. Expected:0x2203 got:0x52722
2017-10-26T20:18:52.227Z,1509049132.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:52.592Z,1509049132.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:52.600Z,1509049132.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:53.077Z,1509049133.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:53.391Z,1509049133.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:53.419Z,1509049133.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:53.798Z,1509049133.798 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:53.814Z,1509049133.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:54.257Z,1509049134.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:54.594Z,1509049134.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:54.595Z,1509049134.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:55.110Z,1509049135.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:55.396Z,1509049135.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:55.403Z,1509049135.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:55.801Z,1509049135.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:55.806Z,1509049135.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:56.244Z,1509049136.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:56.598Z,1509049136.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:56.615Z,1509049136.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:56.975Z,1509049136.975 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:18:57.093Z,1509049137.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:57.391Z,1509049137.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:57.430Z,1509049137.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:57.789Z,1509049137.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:57.796Z,1509049137.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:58.214Z,1509049138.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:58.589Z,1509049138.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:58.615Z,1509049138.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:59.086Z,1509049139.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:59.388Z,1509049139.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:59.412Z,1509049139.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:18:59.793Z,1509049139.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:18:59.819Z,1509049139.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:00.237Z,1509049140.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:00.588Z,1509049140.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:00.613Z,1509049140.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:01.080Z,1509049141.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:01.388Z,1509049141.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:01.418Z,1509049141.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:01.808Z,1509049141.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:01.810Z,1509049141.810 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:02.231Z,1509049142.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:02.588Z,1509049142.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:02.595Z,1509049142.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:03.118Z,1509049143.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:03.393Z,1509049143.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:03.410Z,1509049143.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:03.793Z,1509049143.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:03.797Z,1509049143.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:04.225Z,1509049144.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:04.595Z,1509049144.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:04.621Z,1509049144.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:05.033Z,1509049145.033 [PNI_TCM](ERROR): CRC does not match. Expected:0x45168 got:0x35356
2017-10-26T20:19:05.088Z,1509049145.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:05.392Z,1509049145.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:05.423Z,1509049145.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:05.796Z,1509049145.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:05.798Z,1509049145.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:06.247Z,1509049146.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:06.594Z,1509049146.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:06.607Z,1509049146.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:07.049Z,1509049147.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:07.391Z,1509049147.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:07.429Z,1509049147.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:07.795Z,1509049147.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:07.814Z,1509049147.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:08.239Z,1509049148.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:08.593Z,1509049148.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:08.653Z,1509049148.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:09.054Z,1509049149.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:09.394Z,1509049149.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:09.408Z,1509049149.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:09.799Z,1509049149.799 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:09.829Z,1509049149.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:10.220Z,1509049150.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:10.593Z,1509049150.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:10.614Z,1509049150.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:11.074Z,1509049151.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:11.392Z,1509049151.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:11.393Z,1509049151.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:11.802Z,1509049151.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:11.828Z,1509049151.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:12.251Z,1509049152.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:12.599Z,1509049152.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:12.601Z,1509049152.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:13.058Z,1509049153.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:13.392Z,1509049153.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:13.404Z,1509049153.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:13.789Z,1509049153.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:13.797Z,1509049153.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:14.214Z,1509049154.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:14.594Z,1509049154.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:14.600Z,1509049154.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:15.205Z,1509049155.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:15.391Z,1509049155.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:15.516Z,1509049155.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:15.796Z,1509049155.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:15.918Z,1509049155.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:16.360Z,1509049156.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:16.589Z,1509049156.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:16.724Z,1509049156.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:17.136Z,1509049157.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:17.388Z,1509049157.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:17.532Z,1509049157.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:17.923Z,1509049157.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:18.186Z,1509049158.186 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:18.342Z,1509049158.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:18.596Z,1509049158.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:18.723Z,1509049158.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:19.120Z,1509049159.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:19.390Z,1509049159.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:19.532Z,1509049159.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:19.794Z,1509049159.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:19.929Z,1509049159.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:20.333Z,1509049160.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:20.590Z,1509049160.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:20.726Z,1509049160.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:21.132Z,1509049161.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:21.385Z,1509049161.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:21.524Z,1509049161.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:21.789Z,1509049161.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:21.917Z,1509049161.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:22.312Z,1509049162.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:22.583Z,1509049162.583 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:22.772Z,1509049162.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:23.127Z,1509049163.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:23.380Z,1509049163.380 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:23.532Z,1509049163.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:23.787Z,1509049163.787 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:23.927Z,1509049163.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:24.348Z,1509049164.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:24.586Z,1509049164.586 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:24.724Z,1509049164.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:24.992Z,1509049164.992 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:25.113Z,1509049165.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:25.419Z,1509049165.419 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:25.546Z,1509049165.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:25.924Z,1509049165.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:26.216Z,1509049166.216 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:26.363Z,1509049166.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:26.621Z,1509049166.621 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:26.759Z,1509049166.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:27.124Z,1509049167.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:27.528Z,1509049167.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:27.599Z,1509049167.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:27.923Z,1509049167.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:28.321Z,1509049168.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:28.392Z,1509049168.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:28.739Z,1509049168.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:29.126Z,1509049169.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:29.191Z,1509049169.191 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:29.535Z,1509049169.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:29.597Z,1509049169.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:29.925Z,1509049169.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:30.312Z,1509049170.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:30.391Z,1509049170.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:30.720Z,1509049170.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:31.113Z,1509049171.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:31.189Z,1509049171.189 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:31.520Z,1509049171.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:31.593Z,1509049171.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:31.971Z,1509049171.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:32.321Z,1509049172.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:32.390Z,1509049172.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:32.722Z,1509049172.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:33.128Z,1509049173.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:33.188Z,1509049173.188 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:33.526Z,1509049173.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:33.594Z,1509049173.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:33.923Z,1509049173.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:34.334Z,1509049174.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:34.389Z,1509049174.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:34.737Z,1509049174.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:34.793Z,1509049174.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:35.113Z,1509049175.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:35.434Z,1509049175.434 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:35.525Z,1509049175.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:36.082Z,1509049176.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:36.232Z,1509049176.232 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:36.483Z,1509049176.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:36.637Z,1509049176.637 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:36.889Z,1509049176.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:37.291Z,1509049177.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:37.429Z,1509049177.429 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:37.703Z,1509049177.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:37.835Z,1509049177.835 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:38.081Z,1509049178.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:38.486Z,1509049178.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:38.599Z,1509049178.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:38.938Z,1509049178.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:39.273Z,1509049179.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:39.397Z,1509049179.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:39.707Z,1509049179.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:39.801Z,1509049179.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:40.112Z,1509049180.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:40.506Z,1509049180.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:40.598Z,1509049180.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:40.925Z,1509049180.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:41.298Z,1509049181.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:41.393Z,1509049181.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:41.688Z,1509049181.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:41.796Z,1509049181.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:42.077Z,1509049182.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:42.481Z,1509049182.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:42.593Z,1509049182.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:42.901Z,1509049182.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:43.298Z,1509049183.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:43.395Z,1509049183.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:43.674Z,1509049183.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:43.800Z,1509049183.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:44.092Z,1509049184.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:44.482Z,1509049184.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:44.593Z,1509049184.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:44.890Z,1509049184.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:45.284Z,1509049185.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:45.390Z,1509049185.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:45.693Z,1509049185.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:45.794Z,1509049185.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:46.094Z,1509049186.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:46.492Z,1509049186.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:46.592Z,1509049186.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:46.894Z,1509049186.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:47.285Z,1509049187.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:47.392Z,1509049187.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:47.684Z,1509049187.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:47.798Z,1509049187.798 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:48.105Z,1509049188.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:48.483Z,1509049188.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:48.591Z,1509049188.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:48.893Z,1509049188.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:49.344Z,1509049189.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:49.390Z,1509049189.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:49.697Z,1509049189.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:49.797Z,1509049189.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:50.093Z,1509049190.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:50.491Z,1509049190.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:50.592Z,1509049190.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:50.870Z,1509049190.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:51.317Z,1509049191.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:51.387Z,1509049191.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:51.688Z,1509049191.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:51.792Z,1509049191.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:52.092Z,1509049192.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:52.494Z,1509049192.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:52.592Z,1509049192.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:53.010Z,1509049193.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:53.275Z,1509049193.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:53.391Z,1509049193.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:53.713Z,1509049193.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:53.959Z,1509049193.959 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:54.084Z,1509049194.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:54.499Z,1509049194.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:54.600Z,1509049194.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:54.882Z,1509049194.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:55.303Z,1509049195.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:55.394Z,1509049195.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:55.685Z,1509049195.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:55.798Z,1509049195.798 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:56.109Z,1509049196.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:56.487Z,1509049196.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:56.595Z,1509049196.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:56.879Z,1509049196.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:57.241Z,1509049197.241 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:19:57.295Z,1509049197.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:57.396Z,1509049197.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:57.685Z,1509049197.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:57.801Z,1509049197.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:58.109Z,1509049198.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:58.485Z,1509049198.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:58.598Z,1509049198.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:58.878Z,1509049198.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:59.292Z,1509049199.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:19:59.392Z,1509049199.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:19:59.682Z,1509049199.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:00.089Z,1509049200.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:00.190Z,1509049200.190 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:00.496Z,1509049200.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:00.597Z,1509049200.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:00.901Z,1509049200.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:01.287Z,1509049201.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:01.391Z,1509049201.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:01.701Z,1509049201.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:01.799Z,1509049201.799 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:02.078Z,1509049202.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:02.483Z,1509049202.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:02.597Z,1509049202.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:02.899Z,1509049202.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:03.301Z,1509049203.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:03.394Z,1509049203.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:03.706Z,1509049203.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:03.798Z,1509049203.798 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:04.086Z,1509049204.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:04.508Z,1509049204.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:04.591Z,1509049204.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:04.884Z,1509049204.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:05.293Z,1509049205.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:05.391Z,1509049205.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:05.697Z,1509049205.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:05.797Z,1509049205.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:06.072Z,1509049206.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:06.475Z,1509049206.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:06.591Z,1509049206.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:07.007Z,1509049207.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:07.350Z,1509049207.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:07.392Z,1509049207.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:07.679Z,1509049207.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:07.797Z,1509049207.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:08.116Z,1509049208.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:08.504Z,1509049208.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:08.592Z,1509049208.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:08.901Z,1509049208.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:09.311Z,1509049209.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:09.387Z,1509049209.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:09.693Z,1509049209.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:09.792Z,1509049209.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:10.080Z,1509049210.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:10.499Z,1509049210.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:10.589Z,1509049210.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:10.891Z,1509049210.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:10.994Z,1509049210.994 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:11.297Z,1509049211.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:11.414Z,1509049211.414 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:11.691Z,1509049211.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:12.078Z,1509049212.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:12.211Z,1509049212.211 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:12.480Z,1509049212.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:12.616Z,1509049212.616 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:12.890Z,1509049212.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:13.297Z,1509049213.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:13.409Z,1509049213.409 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:13.678Z,1509049213.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:13.815Z,1509049213.815 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:14.081Z,1509049214.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:14.484Z,1509049214.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:14.599Z,1509049214.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:14.877Z,1509049214.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:15.290Z,1509049215.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:15.393Z,1509049215.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:15.692Z,1509049215.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:15.797Z,1509049215.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:16.112Z,1509049216.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:16.482Z,1509049216.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:16.592Z,1509049216.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:16.881Z,1509049216.881 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:16.881Z,1509049216.881 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 11
2017-10-26T20:20:16.881Z,1509049216.881 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:20:16.886Z,1509049216.886 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:16.886Z,1509049216.886 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 11
2017-10-26T20:20:16.886Z,1509049216.886 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:20:16.997Z,1509049216.997 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:20:16.997Z,1509049216.997 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:20:17.382Z,1509049217.382 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:20:17.382Z,1509049217.382 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 11
2017-10-26T20:20:17.383Z,1509049217.383 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:20:17.383Z,1509049217.383 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 11
2017-10-26T20:20:17.388Z,1509049217.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:17.684Z,1509049217.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:20:17.684Z,1509049217.684 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:20:17.685Z,1509049217.685 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:20:17.687Z,1509049217.687 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:20:17.688Z,1509049217.688 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:20:17.688Z,1509049217.688 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:20:17.792Z,1509049217.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:18.084Z,1509049218.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:18.489Z,1509049218.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:18.585Z,1509049218.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:18.891Z,1509049218.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:19.285Z,1509049219.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:19.387Z,1509049219.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:19.679Z,1509049219.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:19.793Z,1509049219.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:20.082Z,1509049220.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:20.493Z,1509049220.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:20.585Z,1509049220.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:20.894Z,1509049220.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:21.333Z,1509049221.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:21.382Z,1509049221.382 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:21.701Z,1509049221.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:21.790Z,1509049221.790 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:22.105Z,1509049222.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:22.506Z,1509049222.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:22.588Z,1509049222.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:22.914Z,1509049222.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:23.318Z,1509049223.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:23.389Z,1509049223.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:23.692Z,1509049223.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:23.794Z,1509049223.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:24.090Z,1509049224.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:24.505Z,1509049224.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:24.593Z,1509049224.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:24.879Z,1509049224.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:25.288Z,1509049225.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:25.388Z,1509049225.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:25.691Z,1509049225.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:25.793Z,1509049225.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:26.091Z,1509049226.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:26.483Z,1509049226.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:26.592Z,1509049226.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:26.886Z,1509049226.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:27.292Z,1509049227.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:27.387Z,1509049227.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:27.684Z,1509049227.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:27.793Z,1509049227.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:28.087Z,1509049228.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:28.500Z,1509049228.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:28.585Z,1509049228.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:28.895Z,1509049228.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:29.287Z,1509049229.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:29.384Z,1509049229.384 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:29.692Z,1509049229.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:29.791Z,1509049229.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:30.080Z,1509049230.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:30.487Z,1509049230.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:30.588Z,1509049230.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:30.897Z,1509049230.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:31.284Z,1509049231.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:31.385Z,1509049231.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:31.704Z,1509049231.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:31.790Z,1509049231.790 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:32.079Z,1509049232.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:32.481Z,1509049232.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:32.590Z,1509049232.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:32.882Z,1509049232.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:33.298Z,1509049233.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:33.393Z,1509049233.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:33.710Z,1509049233.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:33.797Z,1509049233.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:34.078Z,1509049234.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:34.486Z,1509049234.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:34.594Z,1509049234.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:34.883Z,1509049234.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:35.345Z,1509049235.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:35.392Z,1509049235.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:35.687Z,1509049235.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:35.796Z,1509049235.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:36.096Z,1509049236.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:36.520Z,1509049236.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:36.589Z,1509049236.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:36.879Z,1509049236.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:37.312Z,1509049237.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:37.388Z,1509049237.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:37.714Z,1509049237.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:37.795Z,1509049237.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:38.078Z,1509049238.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:38.483Z,1509049238.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:38.588Z,1509049238.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:38.887Z,1509049238.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:39.284Z,1509049239.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:39.390Z,1509049239.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:39.687Z,1509049239.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:39.795Z,1509049239.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:40.086Z,1509049240.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:40.494Z,1509049240.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:40.593Z,1509049240.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:40.897Z,1509049240.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:41.281Z,1509049241.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:41.389Z,1509049241.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:41.682Z,1509049241.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:41.793Z,1509049241.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:42.090Z,1509049242.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:42.493Z,1509049242.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:42.587Z,1509049242.587 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:42.909Z,1509049242.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:43.286Z,1509049243.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:43.384Z,1509049243.384 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:43.687Z,1509049243.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:43.791Z,1509049243.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:44.091Z,1509049244.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:44.492Z,1509049244.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:44.598Z,1509049244.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:44.873Z,1509049244.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:45.290Z,1509049245.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:45.395Z,1509049245.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:45.691Z,1509049245.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:45.800Z,1509049245.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:46.089Z,1509049246.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:46.475Z,1509049246.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:46.593Z,1509049246.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:46.903Z,1509049246.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:47.282Z,1509049247.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:47.394Z,1509049247.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:47.799Z,1509049247.799 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:47.853Z,1509049247.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:48.271Z,1509049248.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:48.597Z,1509049248.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:48.671Z,1509049248.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:49.100Z,1509049249.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:49.405Z,1509049249.405 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:49.488Z,1509049249.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:49.810Z,1509049249.810 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:49.908Z,1509049249.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:50.261Z,1509049250.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:50.607Z,1509049250.607 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:50.690Z,1509049250.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:51.086Z,1509049251.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:51.498Z,1509049251.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:51.597Z,1509049251.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:51.901Z,1509049251.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:52.262Z,1509049252.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:52.390Z,1509049252.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:52.663Z,1509049252.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:53.092Z,1509049253.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:53.188Z,1509049253.188 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:53.495Z,1509049253.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:53.600Z,1509049253.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:53.858Z,1509049253.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:54.254Z,1509049254.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:54.394Z,1509049254.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:54.665Z,1509049254.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:55.079Z,1509049255.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:55.191Z,1509049255.191 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:55.472Z,1509049255.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:55.608Z,1509049255.608 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:55.875Z,1509049255.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:56.254Z,1509049256.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:56.400Z,1509049256.400 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:56.662Z,1509049256.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:57.098Z,1509049257.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:57.198Z,1509049257.198 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:57.410Z,1509049257.410 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:20:57.464Z,1509049257.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:57.602Z,1509049257.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:57.845Z,1509049257.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:58.271Z,1509049258.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:58.399Z,1509049258.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:58.674Z,1509049258.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:59.078Z,1509049259.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:59.197Z,1509049259.197 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:59.458Z,1509049259.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:20:59.601Z,1509049259.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:20:59.856Z,1509049259.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:00.271Z,1509049260.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:00.394Z,1509049260.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:00.666Z,1509049260.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:01.066Z,1509049261.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:01.192Z,1509049261.192 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:01.469Z,1509049261.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:01.600Z,1509049261.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:01.847Z,1509049261.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:02.292Z,1509049262.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:02.394Z,1509049262.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:02.656Z,1509049262.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:03.076Z,1509049263.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:03.191Z,1509049263.191 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:03.467Z,1509049263.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:03.599Z,1509049263.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:03.918Z,1509049263.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:04.274Z,1509049264.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:04.393Z,1509049264.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:04.691Z,1509049264.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:05.068Z,1509049265.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:05.191Z,1509049265.191 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:05.493Z,1509049265.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:05.598Z,1509049265.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:05.875Z,1509049265.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:06.251Z,1509049266.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:06.392Z,1509049266.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:06.666Z,1509049266.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:07.065Z,1509049267.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:07.190Z,1509049267.190 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:07.462Z,1509049267.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:07.597Z,1509049267.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:07.851Z,1509049267.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:08.269Z,1509049268.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:08.391Z,1509049268.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:08.661Z,1509049268.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:09.081Z,1509049269.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:09.189Z,1509049269.189 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:09.468Z,1509049269.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:09.608Z,1509049269.608 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:09.879Z,1509049269.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:10.257Z,1509049270.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:10.402Z,1509049270.402 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:10.661Z,1509049270.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:11.091Z,1509049271.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:11.199Z,1509049271.199 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:11.461Z,1509049271.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:11.604Z,1509049271.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:11.850Z,1509049271.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:12.244Z,1509049272.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:12.397Z,1509049272.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:12.650Z,1509049272.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:13.089Z,1509049273.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:13.194Z,1509049273.194 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:13.464Z,1509049273.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:13.599Z,1509049273.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:13.859Z,1509049273.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:14.255Z,1509049274.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:14.396Z,1509049274.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:14.664Z,1509049274.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:14.801Z,1509049274.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:15.079Z,1509049275.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:15.402Z,1509049275.402 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:15.477Z,1509049275.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:15.886Z,1509049275.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:16.206Z,1509049276.206 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:16.267Z,1509049276.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:16.611Z,1509049276.611 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:16.812Z,1509049276.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:17.237Z,1509049277.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:17.405Z,1509049277.405 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:17.652Z,1509049277.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:17.809Z,1509049277.809 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:18.047Z,1509049278.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:18.417Z,1509049278.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:18.599Z,1509049278.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:18.829Z,1509049278.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:19.235Z,1509049279.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:19.384Z,1509049279.384 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:19.642Z,1509049279.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:20.044Z,1509049280.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:20.182Z,1509049280.182 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:20.432Z,1509049280.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:20.598Z,1509049280.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:20.817Z,1509049280.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:21.232Z,1509049281.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:21.391Z,1509049281.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:21.615Z,1509049281.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:22.013Z,1509049282.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:22.191Z,1509049282.191 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:22.418Z,1509049282.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:22.601Z,1509049282.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:22.819Z,1509049282.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:23.226Z,1509049283.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:23.398Z,1509049283.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:23.687Z,1509049283.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:23.803Z,1509049283.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:24.014Z,1509049284.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:24.407Z,1509049284.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:24.596Z,1509049284.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:24.828Z,1509049284.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:25.225Z,1509049285.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:25.394Z,1509049285.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:25.634Z,1509049285.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:25.798Z,1509049285.798 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:26.040Z,1509049286.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:26.409Z,1509049286.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:26.591Z,1509049286.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:26.808Z,1509049286.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:27.242Z,1509049287.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:27.392Z,1509049287.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:27.617Z,1509049287.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:27.797Z,1509049287.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:28.017Z,1509049288.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:28.415Z,1509049288.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:28.593Z,1509049288.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:28.821Z,1509049288.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:29.232Z,1509049289.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:29.387Z,1509049289.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:29.650Z,1509049289.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:29.792Z,1509049289.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:30.018Z,1509049290.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:30.415Z,1509049290.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:30.585Z,1509049290.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:30.813Z,1509049290.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:31.226Z,1509049291.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:31.382Z,1509049291.382 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:31.621Z,1509049291.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:31.790Z,1509049291.790 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:32.012Z,1509049292.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:32.438Z,1509049292.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:32.592Z,1509049292.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:32.825Z,1509049292.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:33.243Z,1509049293.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:33.396Z,1509049293.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:33.622Z,1509049293.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:33.802Z,1509049293.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:34.023Z,1509049294.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:34.411Z,1509049294.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:34.595Z,1509049294.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:34.825Z,1509049294.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:35.234Z,1509049295.234 [BPC1](ERROR): Failed to receive battery data
2017-10-26T20:21:35.234Z,1509049295.234 [BPC1] Communications Fault, FailCount= 1
2017-10-26T20:21:35.234Z,1509049295.234 [BPC1](ERROR): Communications Fault
2017-10-26T20:21:35.243Z,1509049295.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:35.325Z,1509049295.325 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T20:21:35.400Z,1509049295.400 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:35.639Z,1509049295.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:35.806Z,1509049295.806 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:36.025Z,1509049296.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:36.412Z,1509049296.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:36.459Z,1509049296.459 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:21:36.460Z,1509049296.460 [BPC1] No Fault, FailCount= 1
2017-10-26T20:21:36.876Z,1509049296.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:37.251Z,1509049297.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:37.404Z,1509049297.404 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:37.614Z,1509049297.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:38.017Z,1509049298.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:38.201Z,1509049298.201 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:38.433Z,1509049298.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:38.606Z,1509049298.606 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:38.812Z,1509049298.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:39.237Z,1509049299.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:39.399Z,1509049299.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:39.631Z,1509049299.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:39.804Z,1509049299.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:40.010Z,1509049300.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:40.417Z,1509049300.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:40.597Z,1509049300.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:40.820Z,1509049300.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:41.260Z,1509049301.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:41.392Z,1509049301.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:41.618Z,1509049301.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:41.799Z,1509049301.799 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:42.019Z,1509049302.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:42.421Z,1509049302.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:42.593Z,1509049302.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:42.803Z,1509049302.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:43.233Z,1509049303.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:43.389Z,1509049303.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:43.614Z,1509049303.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:43.794Z,1509049303.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:44.198Z,1509049304.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:44.542Z,1509049304.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:44.590Z,1509049304.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:45.052Z,1509049305.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:45.388Z,1509049305.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:45.390Z,1509049305.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:45.763Z,1509049305.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:45.793Z,1509049305.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:46.180Z,1509049306.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:46.542Z,1509049306.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:46.594Z,1509049306.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:46.999Z,1509049306.999 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:47.103Z,1509049307.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:47.372Z,1509049307.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:47.427Z,1509049307.427 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:47.767Z,1509049307.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:48.213Z,1509049308.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:48.225Z,1509049308.225 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:48.607Z,1509049308.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:48.629Z,1509049308.629 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:49.047Z,1509049309.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:49.363Z,1509049309.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:49.426Z,1509049309.426 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:49.766Z,1509049309.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:49.831Z,1509049309.831 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:50.201Z,1509049310.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:50.581Z,1509049310.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:50.596Z,1509049310.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:51.006Z,1509049311.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:51.365Z,1509049311.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:51.389Z,1509049311.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:51.794Z,1509049311.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:51.809Z,1509049311.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:52.208Z,1509049312.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:52.554Z,1509049312.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:52.590Z,1509049312.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:53.054Z,1509049313.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:53.374Z,1509049313.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:53.388Z,1509049313.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:53.793Z,1509049313.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:53.801Z,1509049313.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:54.228Z,1509049314.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:54.557Z,1509049314.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:54.590Z,1509049314.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:54.950Z,1509049314.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:55.375Z,1509049315.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:55.388Z,1509049315.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:55.763Z,1509049315.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:55.793Z,1509049315.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:56.196Z,1509049316.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:56.578Z,1509049316.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:56.585Z,1509049316.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:56.951Z,1509049316.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:57.343Z,1509049317.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:57.384Z,1509049317.384 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:57.795Z,1509049317.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:57.828Z,1509049317.828 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:21:57.890Z,1509049317.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:58.298Z,1509049318.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:58.593Z,1509049318.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:58.705Z,1509049318.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:59.134Z,1509049319.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:59.393Z,1509049319.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:59.492Z,1509049319.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:21:59.799Z,1509049319.799 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:21:59.889Z,1509049319.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:00.291Z,1509049320.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:00.593Z,1509049320.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:00.700Z,1509049320.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:01.087Z,1509049321.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:01.389Z,1509049321.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:01.487Z,1509049321.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:01.793Z,1509049321.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:01.873Z,1509049321.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:02.304Z,1509049322.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:02.587Z,1509049322.587 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:02.685Z,1509049322.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:03.095Z,1509049323.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:03.384Z,1509049323.384 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:03.485Z,1509049323.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:03.791Z,1509049323.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:03.895Z,1509049323.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:04.302Z,1509049324.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:04.586Z,1509049324.586 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:04.700Z,1509049324.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:05.116Z,1509049325.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:05.384Z,1509049325.384 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:05.566Z,1509049325.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:05.796Z,1509049325.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:05.888Z,1509049325.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:06.338Z,1509049326.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:06.589Z,1509049326.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:06.692Z,1509049326.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:07.102Z,1509049327.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:07.387Z,1509049327.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:07.521Z,1509049327.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:07.791Z,1509049327.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:07.885Z,1509049327.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:08.328Z,1509049328.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:08.593Z,1509049328.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:08.689Z,1509049328.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:09.124Z,1509049329.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:09.390Z,1509049329.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:09.492Z,1509049329.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:09.888Z,1509049329.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:10.189Z,1509049330.189 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:10.289Z,1509049330.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:10.599Z,1509049330.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:10.687Z,1509049330.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:11.118Z,1509049331.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:11.393Z,1509049331.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:11.486Z,1509049331.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:11.797Z,1509049331.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:11.888Z,1509049331.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:12.288Z,1509049332.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:12.590Z,1509049332.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:12.693Z,1509049332.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:13.101Z,1509049333.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:13.389Z,1509049333.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:13.500Z,1509049333.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:13.796Z,1509049333.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:13.899Z,1509049333.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:14.284Z,1509049334.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:14.589Z,1509049334.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:14.683Z,1509049334.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:15.123Z,1509049335.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:15.391Z,1509049335.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:15.495Z,1509049335.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:15.795Z,1509049335.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:15.884Z,1509049335.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:16.287Z,1509049336.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:16.591Z,1509049336.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:16.743Z,1509049336.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:17.084Z,1509049337.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:17.386Z,1509049337.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:17.489Z,1509049337.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:17.790Z,1509049337.790 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:17.886Z,1509049337.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:18.287Z,1509049338.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:18.584Z,1509049338.584 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:18.684Z,1509049338.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:19.107Z,1509049339.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:19.381Z,1509049339.381 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:19.484Z,1509049339.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:19.788Z,1509049339.788 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:19.928Z,1509049339.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:20.281Z,1509049340.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:20.589Z,1509049340.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:20.733Z,1509049340.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:21.104Z,1509049341.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:21.386Z,1509049341.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:21.487Z,1509049341.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:21.797Z,1509049341.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:21.923Z,1509049341.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:22.290Z,1509049342.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:22.594Z,1509049342.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:22.725Z,1509049342.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:23.100Z,1509049343.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:23.391Z,1509049343.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:23.494Z,1509049343.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:23.889Z,1509049343.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:24.189Z,1509049344.189 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:24.295Z,1509049344.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:24.597Z,1509049344.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:24.710Z,1509049344.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:25.078Z,1509049345.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:25.382Z,1509049345.382 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:25.477Z,1509049345.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:25.883Z,1509049345.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:26.181Z,1509049346.181 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:26.294Z,1509049346.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:26.600Z,1509049346.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:26.693Z,1509049346.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:27.087Z,1509049347.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:27.387Z,1509049347.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:27.481Z,1509049347.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:27.878Z,1509049347.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:28.184Z,1509049348.184 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:28.284Z,1509049348.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:28.599Z,1509049348.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:28.680Z,1509049348.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:29.128Z,1509049349.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:29.393Z,1509049349.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:29.488Z,1509049349.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:29.797Z,1509049349.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:29.894Z,1509049349.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:30.299Z,1509049350.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:30.590Z,1509049350.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:30.694Z,1509049350.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:31.095Z,1509049351.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:31.383Z,1509049351.383 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:31.483Z,1509049351.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:31.893Z,1509049351.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:32.181Z,1509049352.181 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:32.289Z,1509049352.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:32.598Z,1509049352.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:32.689Z,1509049352.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:33.097Z,1509049353.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:33.391Z,1509049353.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:33.473Z,1509049353.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:33.905Z,1509049353.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:34.195Z,1509049354.195 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:34.322Z,1509049354.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:34.601Z,1509049354.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:34.685Z,1509049354.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:35.133Z,1509049355.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:35.398Z,1509049355.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:35.485Z,1509049355.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:35.802Z,1509049355.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:35.939Z,1509049355.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:36.296Z,1509049356.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:36.595Z,1509049356.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:36.718Z,1509049356.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:37.134Z,1509049357.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:37.391Z,1509049357.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:37.497Z,1509049357.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:37.799Z,1509049357.799 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:37.902Z,1509049357.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:38.286Z,1509049358.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:38.590Z,1509049358.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:38.685Z,1509049358.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:39.100Z,1509049359.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:39.392Z,1509049359.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:39.486Z,1509049359.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:39.796Z,1509049359.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:39.880Z,1509049359.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:40.287Z,1509049360.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:40.592Z,1509049360.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:40.686Z,1509049360.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:41.083Z,1509049361.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:41.387Z,1509049361.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:41.491Z,1509049361.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:41.791Z,1509049361.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:41.898Z,1509049361.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:42.285Z,1509049362.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:42.589Z,1509049362.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:42.700Z,1509049362.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:43.108Z,1509049363.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:43.386Z,1509049363.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:43.500Z,1509049363.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:43.792Z,1509049363.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:43.886Z,1509049363.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:44.289Z,1509049364.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:44.588Z,1509049364.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:44.689Z,1509049364.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:44.994Z,1509049364.994 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:45.129Z,1509049365.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:45.425Z,1509049365.425 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:45.489Z,1509049365.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:45.890Z,1509049365.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:46.235Z,1509049366.235 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:46.298Z,1509049366.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:46.639Z,1509049366.639 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:46.694Z,1509049366.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:47.101Z,1509049367.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:47.483Z,1509049367.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:47.601Z,1509049367.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:47.904Z,1509049367.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:48.310Z,1509049368.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:48.394Z,1509049368.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:48.684Z,1509049368.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:49.089Z,1509049369.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:49.192Z,1509049369.192 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:49.518Z,1509049369.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:49.600Z,1509049369.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:49.917Z,1509049369.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:50.319Z,1509049370.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:50.393Z,1509049370.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:50.691Z,1509049370.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:51.115Z,1509049371.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:51.191Z,1509049371.191 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:51.502Z,1509049371.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:51.607Z,1509049371.607 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:51.887Z,1509049371.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:52.296Z,1509049372.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:52.400Z,1509049372.400 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:52.697Z,1509049372.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:53.110Z,1509049373.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:53.198Z,1509049373.198 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:53.486Z,1509049373.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:53.602Z,1509049373.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:53.888Z,1509049373.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:54.292Z,1509049374.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:54.399Z,1509049374.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:54.688Z,1509049374.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:54.804Z,1509049374.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:55.114Z,1509049375.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:55.429Z,1509049375.429 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:55.491Z,1509049375.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:55.899Z,1509049375.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:56.226Z,1509049376.226 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:56.318Z,1509049376.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:56.630Z,1509049376.630 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:56.685Z,1509049376.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:57.082Z,1509049377.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:57.388Z,1509049377.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:57.492Z,1509049377.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:57.885Z,1509049377.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:58.194Z,1509049378.194 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:58.237Z,1509049378.237 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:22:58.315Z,1509049378.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:58.602Z,1509049378.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:58.700Z,1509049378.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:59.089Z,1509049379.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:59.391Z,1509049379.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:22:59.486Z,1509049379.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:22:59.889Z,1509049379.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:00.189Z,1509049380.189 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:00.291Z,1509049380.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:00.597Z,1509049380.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:00.704Z,1509049380.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:01.088Z,1509049381.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:01.391Z,1509049381.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:01.485Z,1509049381.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:01.897Z,1509049381.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:02.188Z,1509049382.188 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:02.333Z,1509049382.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:02.596Z,1509049382.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:02.917Z,1509049382.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:03.318Z,1509049383.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:03.394Z,1509049383.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:03.740Z,1509049383.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:03.798Z,1509049383.798 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:04.114Z,1509049384.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:04.516Z,1509049384.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:04.593Z,1509049384.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:04.978Z,1509049384.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:05.311Z,1509049385.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:05.389Z,1509049385.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:05.743Z,1509049385.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:05.793Z,1509049385.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:06.145Z,1509049386.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:06.522Z,1509049386.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:06.586Z,1509049386.586 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:06.937Z,1509049386.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:07.307Z,1509049387.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:07.409Z,1509049387.409 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:07.718Z,1509049387.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:07.816Z,1509049387.816 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:08.108Z,1509049388.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:08.519Z,1509049388.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:08.915Z,1509049388.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:09.303Z,1509049389.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:09.402Z,1509049389.402 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:09.725Z,1509049389.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:10.104Z,1509049390.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:10.204Z,1509049390.204 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:10.524Z,1509049390.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:10.609Z,1509049390.609 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:10.918Z,1509049390.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:11.311Z,1509049391.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:11.402Z,1509049391.402 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:11.715Z,1509049391.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:11.806Z,1509049391.806 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:12.117Z,1509049392.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:12.529Z,1509049392.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:12.600Z,1509049392.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:12.910Z,1509049392.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:13.316Z,1509049393.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:13.393Z,1509049393.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:13.721Z,1509049393.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:13.797Z,1509049393.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:14.125Z,1509049394.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:14.504Z,1509049394.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:14.595Z,1509049394.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:14.908Z,1509049394.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:15.392Z,1509049395.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:15.569Z,1509049395.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:15.796Z,1509049395.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:15.943Z,1509049395.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:16.343Z,1509049396.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:16.590Z,1509049396.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:16.777Z,1509049396.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:17.147Z,1509049397.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:17.389Z,1509049397.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:17.547Z,1509049397.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:17.795Z,1509049397.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:17.951Z,1509049397.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:17.951Z,1509049397.951 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 12
2017-10-26T20:23:17.951Z,1509049397.951 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:23:17.955Z,1509049397.955 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:17.955Z,1509049397.955 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 12
2017-10-26T20:23:17.955Z,1509049397.955 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:23:18.001Z,1509049398.001 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:23:18.001Z,1509049398.001 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:23:18.490Z,1509049398.490 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:23:18.490Z,1509049398.490 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 12
2017-10-26T20:23:18.491Z,1509049398.491 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:23:18.491Z,1509049398.491 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 12
2017-10-26T20:23:18.589Z,1509049398.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:18.759Z,1509049398.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:23:18.759Z,1509049398.759 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:23:18.760Z,1509049398.760 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:23:18.762Z,1509049398.762 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:23:18.763Z,1509049398.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:23:18.763Z,1509049398.763 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:23:19.169Z,1509049399.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:19.390Z,1509049399.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:19.581Z,1509049399.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:19.794Z,1509049399.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:19.955Z,1509049399.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:20.382Z,1509049400.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:20.590Z,1509049400.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:20.783Z,1509049400.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:21.159Z,1509049401.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:21.392Z,1509049401.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:21.552Z,1509049401.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:21.798Z,1509049401.798 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:21.958Z,1509049401.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:22.352Z,1509049402.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:22.595Z,1509049402.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:22.762Z,1509049402.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:23.157Z,1509049403.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:23.392Z,1509049403.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:23.539Z,1509049403.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:23.797Z,1509049403.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:23.946Z,1509049403.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:24.353Z,1509049404.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:24.590Z,1509049404.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:24.773Z,1509049404.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:25.157Z,1509049405.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:25.389Z,1509049405.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:25.562Z,1509049405.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:25.796Z,1509049405.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:25.960Z,1509049405.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:26.340Z,1509049406.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:26.590Z,1509049406.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:26.747Z,1509049406.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:27.147Z,1509049407.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:27.390Z,1509049407.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:27.549Z,1509049407.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:27.795Z,1509049407.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:27.952Z,1509049407.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:28.347Z,1509049408.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:28.594Z,1509049408.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:28.748Z,1509049408.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:29.155Z,1509049409.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:29.389Z,1509049409.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:29.565Z,1509049409.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:29.794Z,1509049409.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:29.948Z,1509049409.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:30.343Z,1509049410.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:30.587Z,1509049410.587 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:30.749Z,1509049410.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:31.199Z,1509049411.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:31.385Z,1509049411.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:31.595Z,1509049411.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:31.792Z,1509049411.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:31.964Z,1509049411.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:32.372Z,1509049412.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:32.586Z,1509049412.586 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:32.768Z,1509049412.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:33.203Z,1509049413.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:33.386Z,1509049413.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:33.552Z,1509049413.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:33.792Z,1509049413.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:33.984Z,1509049413.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:34.353Z,1509049414.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:34.590Z,1509049414.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:34.781Z,1509049414.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:35.198Z,1509049415.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:35.391Z,1509049415.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:35.549Z,1509049415.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:35.795Z,1509049415.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:35.969Z,1509049415.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:36.352Z,1509049416.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:36.591Z,1509049416.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:36.769Z,1509049416.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:37.148Z,1509049417.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:37.430Z,1509049417.430 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:37.546Z,1509049417.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:37.957Z,1509049417.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:38.228Z,1509049418.228 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:38.353Z,1509049418.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:38.632Z,1509049418.632 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:38.749Z,1509049418.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:39.182Z,1509049419.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:39.425Z,1509049419.425 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:39.542Z,1509049419.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:39.952Z,1509049419.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:40.222Z,1509049420.222 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:40.351Z,1509049420.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:40.627Z,1509049420.627 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:40.741Z,1509049420.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:41.147Z,1509049421.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:41.420Z,1509049421.420 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:41.551Z,1509049421.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:41.826Z,1509049421.826 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:41.955Z,1509049421.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:42.355Z,1509049422.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:42.594Z,1509049422.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:42.764Z,1509049422.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:43.217Z,1509049423.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:43.387Z,1509049423.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:43.571Z,1509049423.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:43.792Z,1509049423.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:43.942Z,1509049423.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:44.347Z,1509049424.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:44.588Z,1509049424.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:44.745Z,1509049424.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:45.154Z,1509049425.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:45.387Z,1509049425.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:45.552Z,1509049425.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:45.791Z,1509049425.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:45.994Z,1509049425.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:46.349Z,1509049426.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:46.588Z,1509049426.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:46.747Z,1509049426.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:47.153Z,1509049427.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:47.387Z,1509049427.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:47.593Z,1509049427.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:47.792Z,1509049427.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:47.943Z,1509049427.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:48.381Z,1509049428.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:48.583Z,1509049428.583 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:48.755Z,1509049428.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:49.201Z,1509049429.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:49.381Z,1509049429.381 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:49.583Z,1509049429.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:49.785Z,1509049429.785 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:49.959Z,1509049429.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:50.365Z,1509049430.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:50.578Z,1509049430.578 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:50.743Z,1509049430.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:51.139Z,1509049431.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:51.378Z,1509049431.378 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:51.546Z,1509049431.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:51.784Z,1509049431.784 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:51.945Z,1509049431.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:52.347Z,1509049432.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:52.581Z,1509049432.581 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:52.752Z,1509049432.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:53.156Z,1509049433.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:53.383Z,1509049433.383 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:53.552Z,1509049433.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:53.787Z,1509049433.787 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:53.962Z,1509049433.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:54.367Z,1509049434.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:54.585Z,1509049434.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:54.743Z,1509049434.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:54.991Z,1509049434.991 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:55.249Z,1509049435.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:55.446Z,1509049435.446 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:55.661Z,1509049435.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:56.061Z,1509049436.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:56.243Z,1509049436.243 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:56.475Z,1509049436.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:56.648Z,1509049436.648 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:56.856Z,1509049436.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:57.271Z,1509049437.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:57.441Z,1509049437.441 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:57.665Z,1509049437.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:57.846Z,1509049437.846 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:58.014Z,1509049438.014 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:23:58.069Z,1509049438.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:58.469Z,1509049438.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:58.599Z,1509049438.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:58.877Z,1509049438.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:59.325Z,1509049439.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:59.393Z,1509049439.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:23:59.658Z,1509049439.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:23:59.797Z,1509049439.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:00.103Z,1509049440.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:00.478Z,1509049440.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:00.592Z,1509049440.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:00.875Z,1509049440.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:01.260Z,1509049441.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:01.388Z,1509049441.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:01.766Z,1509049441.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:02.071Z,1509049442.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:02.088Z,1509049442.088 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:02.470Z,1509049442.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:02.597Z,1509049442.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:02.899Z,1509049442.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:03.265Z,1509049443.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:03.390Z,1509049443.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:03.759Z,1509049443.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:04.071Z,1509049444.071 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:04.112Z,1509049444.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:04.476Z,1509049444.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:04.596Z,1509049444.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:04.882Z,1509049444.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:05.270Z,1509049445.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:05.392Z,1509049445.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:05.669Z,1509049445.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:05.798Z,1509049445.798 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:06.077Z,1509049446.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:06.473Z,1509049446.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:06.591Z,1509049446.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:06.869Z,1509049446.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:07.268Z,1509049447.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:07.392Z,1509049447.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:07.658Z,1509049447.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:07.797Z,1509049447.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:08.056Z,1509049448.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:08.462Z,1509049448.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:08.592Z,1509049448.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:08.861Z,1509049448.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:09.258Z,1509049449.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:09.388Z,1509049449.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:09.668Z,1509049449.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:09.792Z,1509049449.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:10.063Z,1509049450.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:10.464Z,1509049450.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:10.590Z,1509049450.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:10.867Z,1509049450.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:11.259Z,1509049451.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:11.387Z,1509049451.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:11.663Z,1509049451.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:11.792Z,1509049451.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:12.057Z,1509049452.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:12.463Z,1509049452.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:12.589Z,1509049452.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:12.873Z,1509049452.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:12.993Z,1509049452.993 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:13.264Z,1509049453.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:13.410Z,1509049453.410 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:13.681Z,1509049453.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:14.067Z,1509049454.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:14.207Z,1509049454.207 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:14.466Z,1509049454.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:14.612Z,1509049454.612 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:14.866Z,1509049454.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:15.266Z,1509049455.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:15.409Z,1509049455.409 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:15.725Z,1509049455.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:15.813Z,1509049455.813 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:16.116Z,1509049456.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:16.465Z,1509049456.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:16.595Z,1509049456.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:16.882Z,1509049456.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:17.392Z,1509049457.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:17.475Z,1509049457.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:17.796Z,1509049457.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:17.920Z,1509049457.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:18.291Z,1509049458.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:18.594Z,1509049458.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:18.693Z,1509049458.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:19.112Z,1509049459.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:19.395Z,1509049459.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:19.483Z,1509049459.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:19.800Z,1509049459.800 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:19.875Z,1509049459.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:19.923Z,1509049459.923 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T20:24:20.275Z,1509049460.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:20.593Z,1509049460.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:20.674Z,1509049460.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:21.126Z,1509049461.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:21.392Z,1509049461.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:21.480Z,1509049461.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:21.795Z,1509049461.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:21.927Z,1509049461.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:22.282Z,1509049462.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:22.588Z,1509049462.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:22.676Z,1509049462.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:23.124Z,1509049463.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:23.389Z,1509049463.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:23.493Z,1509049463.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:23.794Z,1509049463.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:23.884Z,1509049463.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:24.277Z,1509049464.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:24.592Z,1509049464.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:24.667Z,1509049464.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:25.158Z,1509049465.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:25.392Z,1509049465.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:25.483Z,1509049465.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:25.797Z,1509049465.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:25.898Z,1509049465.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:26.277Z,1509049466.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:26.590Z,1509049466.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:26.674Z,1509049466.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:26.995Z,1509049466.995 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:27.075Z,1509049467.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:27.519Z,1509049467.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:27.597Z,1509049467.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:27.886Z,1509049467.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:28.280Z,1509049468.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:28.389Z,1509049468.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:28.684Z,1509049468.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:28.794Z,1509049468.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:29.084Z,1509049469.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:29.506Z,1509049469.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:29.598Z,1509049469.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:29.875Z,1509049469.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:30.104Z,1509049470.104 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:30.281Z,1509049470.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:30.592Z,1509049470.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:30.723Z,1509049470.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:31.069Z,1509049471.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:31.386Z,1509049471.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:31.468Z,1509049471.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:31.912Z,1509049471.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:32.059Z,1509049472.059 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:32.282Z,1509049472.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:32.596Z,1509049472.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:32.690Z,1509049472.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:33.138Z,1509049473.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:33.389Z,1509049473.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:33.489Z,1509049473.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:33.793Z,1509049473.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:33.887Z,1509049473.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:34.291Z,1509049474.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:34.591Z,1509049474.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:34.668Z,1509049474.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:35.155Z,1509049475.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:35.388Z,1509049475.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:35.490Z,1509049475.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:35.793Z,1509049475.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:35.871Z,1509049475.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:36.281Z,1509049476.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:36.586Z,1509049476.586 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:36.688Z,1509049476.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:37.130Z,1509049477.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:37.385Z,1509049477.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:37.477Z,1509049477.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:37.796Z,1509049477.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:37.876Z,1509049477.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:38.287Z,1509049478.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:38.589Z,1509049478.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:38.667Z,1509049478.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:39.152Z,1509049479.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:39.388Z,1509049479.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:39.494Z,1509049479.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:39.791Z,1509049479.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:39.878Z,1509049479.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:40.275Z,1509049480.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:40.593Z,1509049480.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:40.674Z,1509049480.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:41.101Z,1509049481.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:41.390Z,1509049481.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:41.487Z,1509049481.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:41.794Z,1509049481.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:41.885Z,1509049481.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:42.277Z,1509049482.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:42.595Z,1509049482.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:42.682Z,1509049482.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:42.000Z,1509049483.000 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:43.070Z,1509049483.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:43.476Z,1509049483.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:43.597Z,1509049483.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:43.875Z,1509049483.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:44.281Z,1509049484.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:44.594Z,1509049484.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:44.705Z,1509049484.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:45.079Z,1509049485.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:45.390Z,1509049485.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:45.509Z,1509049485.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:45.872Z,1509049485.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:46.094Z,1509049486.094 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:46.291Z,1509049486.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:46.699Z,1509049486.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:46.890Z,1509049486.890 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:47.106Z,1509049487.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:47.438Z,1509049487.438 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:47.499Z,1509049487.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:47.901Z,1509049487.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:48.236Z,1509049488.236 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:48.306Z,1509049488.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:48.641Z,1509049488.641 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:48.688Z,1509049488.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:49.092Z,1509049489.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:49.406Z,1509049489.406 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:49.488Z,1509049489.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:49.884Z,1509049489.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:50.203Z,1509049490.203 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:50.277Z,1509049490.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:50.607Z,1509049490.607 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:50.674Z,1509049490.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:51.075Z,1509049491.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:51.397Z,1509049491.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:51.475Z,1509049491.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:51.883Z,1509049491.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:52.194Z,1509049492.194 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:52.273Z,1509049492.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:52.599Z,1509049492.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:52.675Z,1509049492.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:53.077Z,1509049493.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:53.392Z,1509049493.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:53.498Z,1509049493.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:53.796Z,1509049493.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:53.874Z,1509049493.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:54.269Z,1509049494.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:54.590Z,1509049494.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:54.676Z,1509049494.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:55.099Z,1509049495.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:55.391Z,1509049495.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:55.481Z,1509049495.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:55.796Z,1509049495.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:55.878Z,1509049495.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:56.279Z,1509049496.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:56.592Z,1509049496.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:56.682Z,1509049496.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:57.099Z,1509049497.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:57.386Z,1509049497.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:57.490Z,1509049497.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:57.791Z,1509049497.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:57.873Z,1509049497.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:58.265Z,1509049498.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:58.588Z,1509049498.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:58.624Z,1509049498.624 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:24:58.672Z,1509049498.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:59.107Z,1509049499.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:59.385Z,1509049499.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:59.491Z,1509049499.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:24:59.792Z,1509049499.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:24:59.905Z,1509049499.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:00.313Z,1509049500.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:00.587Z,1509049500.587 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:00.670Z,1509049500.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:00.992Z,1509049500.992 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:01.101Z,1509049501.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:01.405Z,1509049501.405 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:01.487Z,1509049501.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:01.907Z,1509049501.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:02.202Z,1509049502.202 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:02.301Z,1509049502.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:02.606Z,1509049502.606 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:02.679Z,1509049502.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:03.127Z,1509049503.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:03.399Z,1509049503.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:03.526Z,1509049503.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:03.804Z,1509049503.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:03.877Z,1509049503.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:04.274Z,1509049504.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:04.593Z,1509049504.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:04.673Z,1509049504.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:05.102Z,1509049505.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:05.386Z,1509049505.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:05.481Z,1509049505.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:05.791Z,1509049505.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:05.897Z,1509049505.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:06.264Z,1509049506.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:06.585Z,1509049506.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:06.692Z,1509049506.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:07.104Z,1509049507.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:07.382Z,1509049507.382 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:07.476Z,1509049507.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:07.789Z,1509049507.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:07.876Z,1509049507.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:08.281Z,1509049508.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:08.584Z,1509049508.584 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:08.679Z,1509049508.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:09.067Z,1509049509.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:09.381Z,1509049509.381 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:09.479Z,1509049509.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:09.789Z,1509049509.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:09.875Z,1509049509.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:10.270Z,1509049510.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:10.582Z,1509049510.582 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:10.687Z,1509049510.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:11.125Z,1509049511.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:11.382Z,1509049511.382 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:11.496Z,1509049511.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:11.784Z,1509049511.784 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:11.872Z,1509049511.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:12.269Z,1509049512.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:12.585Z,1509049512.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:12.699Z,1509049512.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:13.002Z,1509049513.002 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:13.088Z,1509049513.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:13.407Z,1509049513.407 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:13.474Z,1509049513.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:13.883Z,1509049513.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:14.204Z,1509049514.204 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:14.303Z,1509049514.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:14.609Z,1509049514.609 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:14.711Z,1509049514.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:15.069Z,1509049515.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:15.398Z,1509049515.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:15.481Z,1509049515.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:15.989Z,1509049515.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:16.195Z,1509049516.195 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:16.371Z,1509049516.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:16.600Z,1509049516.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:16.807Z,1509049516.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:17.202Z,1509049517.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:17.393Z,1509049517.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:17.599Z,1509049517.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:17.976Z,1509049517.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:18.191Z,1509049518.191 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:18.369Z,1509049518.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:18.595Z,1509049518.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:18.777Z,1509049518.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:19.202Z,1509049519.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:19.388Z,1509049519.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:19.587Z,1509049519.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:19.794Z,1509049519.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:19.960Z,1509049519.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:20.361Z,1509049520.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:20.592Z,1509049520.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:20.761Z,1509049520.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:21.215Z,1509049521.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:21.387Z,1509049521.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:21.569Z,1509049521.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:21.792Z,1509049521.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:21.975Z,1509049521.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:22.379Z,1509049522.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:22.585Z,1509049522.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:22.781Z,1509049522.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:23.155Z,1509049523.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:23.382Z,1509049523.382 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:23.564Z,1509049523.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:23.789Z,1509049523.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:23.969Z,1509049523.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:24.364Z,1509049524.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:24.580Z,1509049524.580 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:24.767Z,1509049524.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:25.204Z,1509049525.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:25.383Z,1509049525.383 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:25.567Z,1509049525.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:25.794Z,1509049525.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:25.981Z,1509049525.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:26.368Z,1509049526.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:26.587Z,1509049526.587 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:26.754Z,1509049526.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:27.201Z,1509049527.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:27.385Z,1509049527.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:27.561Z,1509049527.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:27.789Z,1509049527.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:27.969Z,1509049527.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:28.377Z,1509049528.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:28.585Z,1509049528.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:28.769Z,1509049528.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:29.211Z,1509049529.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:29.380Z,1509049529.380 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:29.610Z,1509049529.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:30.021Z,1509049530.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:30.179Z,1509049530.179 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:30.374Z,1509049530.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:30.598Z,1509049530.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:30.776Z,1509049530.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:31.216Z,1509049531.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:31.379Z,1509049531.379 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:31.560Z,1509049531.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:31.994Z,1509049531.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:32.178Z,1509049532.178 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:32.396Z,1509049532.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:32.593Z,1509049532.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:32.764Z,1509049532.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:33.175Z,1509049533.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:33.388Z,1509049533.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:33.568Z,1509049533.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:33.795Z,1509049533.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:33.973Z,1509049533.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:34.375Z,1509049534.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:34.588Z,1509049534.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:34.779Z,1509049534.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:35.210Z,1509049535.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:35.382Z,1509049535.382 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:35.568Z,1509049535.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:35.977Z,1509049535.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:36.178Z,1509049536.178 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:36.369Z,1509049536.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:36.595Z,1509049536.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:36.771Z,1509049536.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:37.222Z,1509049537.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:37.385Z,1509049537.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:37.569Z,1509049537.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:37.960Z,1509049537.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:38.184Z,1509049538.184 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:38.364Z,1509049538.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:38.598Z,1509049538.598 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:38.764Z,1509049538.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:39.212Z,1509049539.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:39.391Z,1509049539.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:39.565Z,1509049539.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:39.966Z,1509049539.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:40.189Z,1509049540.189 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:40.368Z,1509049540.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:40.609Z,1509049540.609 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:40.774Z,1509049540.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:41.164Z,1509049541.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:41.398Z,1509049541.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:41.565Z,1509049541.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:41.974Z,1509049541.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:42.197Z,1509049542.197 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:42.376Z,1509049542.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:42.608Z,1509049542.608 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:42.773Z,1509049542.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:43.312Z,1509049543.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:43.407Z,1509049543.407 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:43.698Z,1509049543.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:43.810Z,1509049543.810 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:44.096Z,1509049544.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:44.577Z,1509049544.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:44.599Z,1509049544.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:44.891Z,1509049544.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:45.316Z,1509049545.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:45.393Z,1509049545.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:45.739Z,1509049545.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:45.797Z,1509049545.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:46.112Z,1509049546.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:46.533Z,1509049546.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:46.595Z,1509049546.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:46.937Z,1509049546.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:47.318Z,1509049547.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:47.392Z,1509049547.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:47.701Z,1509049547.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:47.796Z,1509049547.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:48.103Z,1509049548.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:48.513Z,1509049548.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:48.590Z,1509049548.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:48.912Z,1509049548.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:49.311Z,1509049549.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:49.388Z,1509049549.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:49.700Z,1509049549.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:49.796Z,1509049549.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:50.098Z,1509049550.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:50.504Z,1509049550.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:50.596Z,1509049550.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:50.884Z,1509049550.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:51.297Z,1509049551.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:51.398Z,1509049551.398 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:51.711Z,1509049551.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:51.802Z,1509049551.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:52.117Z,1509049552.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:52.497Z,1509049552.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:52.596Z,1509049552.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:52.895Z,1509049552.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:53.304Z,1509049553.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:53.389Z,1509049553.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:53.701Z,1509049553.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:53.794Z,1509049553.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:54.098Z,1509049554.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:54.505Z,1509049554.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:54.591Z,1509049554.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:54.911Z,1509049554.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:55.298Z,1509049555.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:55.388Z,1509049555.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:55.711Z,1509049555.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:55.793Z,1509049555.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:56.120Z,1509049556.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:56.498Z,1509049556.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:56.586Z,1509049556.586 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:56.894Z,1509049556.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:57.333Z,1509049557.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:57.385Z,1509049557.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:57.720Z,1509049557.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:57.792Z,1509049557.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:58.098Z,1509049558.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:58.449Z,1509049558.449 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:25:58.525Z,1509049558.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:58.590Z,1509049558.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:58.912Z,1509049558.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:59.336Z,1509049559.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:59.386Z,1509049559.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:25:59.697Z,1509049559.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:25:59.791Z,1509049559.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:26:00.098Z,1509049560.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:00.518Z,1509049560.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:00.593Z,1509049560.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:26:00.906Z,1509049560.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:01.335Z,1509049561.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:01.389Z,1509049561.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:26:01.710Z,1509049561.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:01.795Z,1509049561.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:26:02.105Z,1509049562.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:02.503Z,1509049562.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:02.592Z,1509049562.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:26:02.897Z,1509049562.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:03.307Z,1509049563.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:03.389Z,1509049563.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:26:03.698Z,1509049563.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:03.793Z,1509049563.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:26:04.104Z,1509049564.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:04.510Z,1509049564.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:04.595Z,1509049564.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:26:04.899Z,1509049564.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:05.296Z,1509049565.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:05.592Z,1509049565.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:26:05.721Z,1509049565.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:06.091Z,1509049566.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:06.385Z,1509049566.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:26:06.500Z,1509049566.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:06.904Z,1509049566.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:07.182Z,1509049567.182 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:26:07.307Z,1509049567.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:07.589Z,1509049567.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:26:07.711Z,1509049567.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:08.098Z,1509049568.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:08.516Z,1509049568.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:08.913Z,1509049568.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:09.302Z,1509049569.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:09.729Z,1509049569.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:10.129Z,1509049570.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:10.490Z,1509049570.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:11.057Z,1509049571.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:11.394Z,1509049571.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:11.808Z,1509049571.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:12.216Z,1509049572.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:12.597Z,1509049572.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:13.079Z,1509049573.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:13.417Z,1509049573.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:13.887Z,1509049573.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:14.214Z,1509049574.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:14.604Z,1509049574.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:15.077Z,1509049575.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:15.407Z,1509049575.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:15.857Z,1509049575.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:16.239Z,1509049576.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:16.583Z,1509049576.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:17.054Z,1509049577.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:17.398Z,1509049577.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:17.779Z,1509049577.779 [PNI_TCM](ERROR): CRC does not match. Expected:0x47036 got:0x17506
2017-10-26T20:26:17.807Z,1509049577.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:18.211Z,1509049578.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:18.597Z,1509049578.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:19.065Z,1509049579.065 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:19.065Z,1509049579.065 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 13
2017-10-26T20:26:19.065Z,1509049579.065 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:26:19.078Z,1509049579.078 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:19.078Z,1509049579.078 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 13
2017-10-26T20:26:19.078Z,1509049579.078 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:26:19.148Z,1509049579.148 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:26:19.149Z,1509049579.149 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:26:19.420Z,1509049579.420 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:26:19.420Z,1509049579.420 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 13
2017-10-26T20:26:19.421Z,1509049579.421 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:26:19.421Z,1509049579.421 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 13
2017-10-26T20:26:19.802Z,1509049579.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:26:19.802Z,1509049579.802 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:26:19.803Z,1509049579.803 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:26:19.805Z,1509049579.805 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:26:19.806Z,1509049579.806 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:26:19.806Z,1509049579.806 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:26:20.215Z,1509049580.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:20.603Z,1509049580.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:21.066Z,1509049581.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:21.415Z,1509049581.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:21.815Z,1509049581.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:22.199Z,1509049582.199 [PNI_TCM](ERROR): CRC does not match. Expected:0x379 got:0x18360
2017-10-26T20:26:22.227Z,1509049582.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:22.706Z,1509049582.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:23.097Z,1509049583.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:23.505Z,1509049583.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:23.904Z,1509049583.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:24.305Z,1509049584.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:24.685Z,1509049584.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:25.140Z,1509049585.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:25.497Z,1509049585.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:25.918Z,1509049585.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:26.300Z,1509049586.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:26.699Z,1509049586.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:27.114Z,1509049587.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:27.503Z,1509049587.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:27.904Z,1509049587.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:28.381Z,1509049588.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:28.716Z,1509049588.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:29.162Z,1509049589.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:29.498Z,1509049589.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:29.921Z,1509049589.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:30.325Z,1509049590.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:30.702Z,1509049590.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:31.104Z,1509049591.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:31.520Z,1509049591.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:31.904Z,1509049591.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:32.301Z,1509049592.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:32.703Z,1509049592.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:33.096Z,1509049593.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:33.513Z,1509049593.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:33.890Z,1509049593.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:34.314Z,1509049594.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:34.693Z,1509049594.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:35.096Z,1509049595.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:35.501Z,1509049595.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:35.901Z,1509049595.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:36.302Z,1509049596.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:36.704Z,1509049596.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:37.102Z,1509049597.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:37.500Z,1509049597.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:37.898Z,1509049597.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:38.317Z,1509049598.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:38.703Z,1509049598.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:39.094Z,1509049599.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:39.508Z,1509049599.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:39.906Z,1509049599.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:40.319Z,1509049600.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:40.690Z,1509049600.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:41.131Z,1509049601.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:41.496Z,1509049601.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:41.894Z,1509049601.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:42.363Z,1509049602.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:42.698Z,1509049602.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:43.101Z,1509049603.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:43.495Z,1509049603.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:43.891Z,1509049603.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:44.304Z,1509049604.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:44.705Z,1509049604.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:45.108Z,1509049605.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:45.497Z,1509049605.497 [BPC1](ERROR): Failed to receive battery data
2017-10-26T20:26:45.497Z,1509049605.497 [BPC1] Communications Fault, FailCount= 1
2017-10-26T20:26:45.497Z,1509049605.497 [BPC1](ERROR): Communications Fault
2017-10-26T20:26:45.507Z,1509049605.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:45.552Z,1509049605.552 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T20:26:45.904Z,1509049605.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:46.316Z,1509049606.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:46.697Z,1509049606.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:46.816Z,1509049606.816 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:26:46.817Z,1509049606.817 [BPC1] No Fault, FailCount= 1
2017-10-26T20:26:47.179Z,1509049607.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:47.505Z,1509049607.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:47.896Z,1509049607.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:48.296Z,1509049608.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:48.707Z,1509049608.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:49.100Z,1509049609.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:49.506Z,1509049609.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:49.906Z,1509049609.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:50.309Z,1509049610.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:50.713Z,1509049610.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:51.092Z,1509049611.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:51.503Z,1509049611.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:51.918Z,1509049611.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:52.309Z,1509049612.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:52.690Z,1509049612.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:53.091Z,1509049613.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:53.504Z,1509049613.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:53.895Z,1509049613.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:54.299Z,1509049614.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:54.704Z,1509049614.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:55.103Z,1509049615.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:55.526Z,1509049615.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:55.896Z,1509049615.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:56.289Z,1509049616.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:56.699Z,1509049616.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:57.111Z,1509049617.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:57.534Z,1509049617.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:57.894Z,1509049617.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:58.294Z,1509049618.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:58.705Z,1509049618.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:59.047Z,1509049619.047 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:26:59.097Z,1509049619.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:59.502Z,1509049619.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:26:59.898Z,1509049619.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:00.306Z,1509049620.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:00.705Z,1509049620.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:01.088Z,1509049621.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:01.501Z,1509049621.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:01.892Z,1509049621.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:02.338Z,1509049622.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:02.702Z,1509049622.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:03.115Z,1509049623.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:03.506Z,1509049623.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:03.900Z,1509049623.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:04.329Z,1509049624.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:04.717Z,1509049624.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:05.127Z,1509049625.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:05.540Z,1509049625.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:05.911Z,1509049625.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:06.295Z,1509049626.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:06.711Z,1509049626.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:07.097Z,1509049627.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:07.506Z,1509049627.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:07.901Z,1509049627.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:08.302Z,1509049628.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:08.715Z,1509049628.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:09.122Z,1509049629.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:09.495Z,1509049629.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:09.910Z,1509049629.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:10.296Z,1509049630.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:10.701Z,1509049630.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:11.136Z,1509049631.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:11.508Z,1509049631.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:11.907Z,1509049631.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:12.314Z,1509049632.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:12.694Z,1509049632.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:13.096Z,1509049633.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:13.499Z,1509049633.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:13.935Z,1509049633.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:14.296Z,1509049634.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:14.702Z,1509049634.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:15.101Z,1509049635.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:15.526Z,1509049635.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:15.940Z,1509049635.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:16.313Z,1509049636.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:16.711Z,1509049636.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:17.157Z,1509049637.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:17.531Z,1509049637.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:17.913Z,1509049637.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:18.332Z,1509049638.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:18.708Z,1509049638.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:19.128Z,1509049639.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:19.525Z,1509049639.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:19.894Z,1509049639.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:20.298Z,1509049640.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:20.694Z,1509049640.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:21.105Z,1509049641.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:21.500Z,1509049641.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:21.901Z,1509049641.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:22.312Z,1509049642.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:22.704Z,1509049642.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:23.095Z,1509049643.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:23.507Z,1509049643.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:23.894Z,1509049643.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:24.313Z,1509049644.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:24.702Z,1509049644.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:25.113Z,1509049645.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:25.494Z,1509049645.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:25.899Z,1509049645.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:26.300Z,1509049646.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:26.700Z,1509049646.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:27.105Z,1509049647.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:27.500Z,1509049647.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:27.918Z,1509049647.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:28.293Z,1509049648.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:28.787Z,1509049648.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:29.236Z,1509049649.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:29.587Z,1509049649.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:30.029Z,1509049650.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:30.409Z,1509049650.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:30.775Z,1509049650.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:31.241Z,1509049651.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:31.639Z,1509049651.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:31.997Z,1509049651.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:32.389Z,1509049652.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:32.819Z,1509049652.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:33.242Z,1509049653.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:33.619Z,1509049653.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:34.019Z,1509049654.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:34.384Z,1509049654.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:34.777Z,1509049654.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:35.224Z,1509049655.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:35.590Z,1509049655.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:35.994Z,1509049655.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:36.389Z,1509049656.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:36.785Z,1509049656.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:37.221Z,1509049657.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:37.583Z,1509049657.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:37.983Z,1509049657.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:38.394Z,1509049658.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:38.784Z,1509049658.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:39.230Z,1509049659.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:39.573Z,1509049659.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:40.003Z,1509049660.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:40.390Z,1509049660.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:40.782Z,1509049660.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:41.215Z,1509049661.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:41.587Z,1509049661.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:41.988Z,1509049661.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:42.402Z,1509049662.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:42.793Z,1509049662.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:43.215Z,1509049663.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:43.586Z,1509049663.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:43.988Z,1509049663.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:44.399Z,1509049664.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:44.826Z,1509049664.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:45.219Z,1509049665.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:45.588Z,1509049665.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:46.011Z,1509049666.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:46.456Z,1509049666.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:46.789Z,1509049666.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:47.248Z,1509049667.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:47.594Z,1509049667.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:48.008Z,1509049668.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:48.412Z,1509049668.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:48.777Z,1509049668.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:49.218Z,1509049669.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:49.584Z,1509049669.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:49.994Z,1509049669.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:50.388Z,1509049670.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:50.793Z,1509049670.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:51.203Z,1509049671.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:51.601Z,1509049671.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:51.989Z,1509049671.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:52.386Z,1509049672.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:52.787Z,1509049672.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:53.219Z,1509049673.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:53.595Z,1509049673.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:53.987Z,1509049673.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:54.379Z,1509049674.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:54.789Z,1509049674.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:55.212Z,1509049675.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:55.598Z,1509049675.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:55.988Z,1509049675.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:56.391Z,1509049676.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:56.788Z,1509049676.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:57.253Z,1509049677.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:57.614Z,1509049677.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:57.983Z,1509049677.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:58.385Z,1509049678.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:58.740Z,1509049678.740 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:27:58.798Z,1509049678.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:59.247Z,1509049679.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:59.595Z,1509049679.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:27:59.988Z,1509049679.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:00.432Z,1509049680.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:00.783Z,1509049680.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:01.234Z,1509049681.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:01.591Z,1509049681.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:02.015Z,1509049682.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:02.433Z,1509049682.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:02.795Z,1509049682.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:03.202Z,1509049683.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:03.597Z,1509049683.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:04.007Z,1509049684.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:04.379Z,1509049684.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:04.797Z,1509049684.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:05.228Z,1509049685.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:05.589Z,1509049685.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:05.981Z,1509049685.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:06.386Z,1509049686.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:06.801Z,1509049686.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:07.205Z,1509049687.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:07.603Z,1509049687.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:07.984Z,1509049687.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:08.376Z,1509049688.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:08.789Z,1509049688.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:09.217Z,1509049689.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:09.592Z,1509049689.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:09.992Z,1509049689.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:10.391Z,1509049690.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:10.791Z,1509049690.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:11.204Z,1509049691.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:11.600Z,1509049691.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:11.983Z,1509049691.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:12.385Z,1509049692.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:12.785Z,1509049692.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:13.248Z,1509049693.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:13.580Z,1509049693.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:13.991Z,1509049693.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:14.438Z,1509049694.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:14.790Z,1509049694.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:15.299Z,1509049695.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:15.582Z,1509049695.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:16.021Z,1509049696.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:16.421Z,1509049696.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:16.794Z,1509049696.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:17.226Z,1509049697.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:17.583Z,1509049697.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:18.013Z,1509049698.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:18.383Z,1509049698.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:18.782Z,1509049698.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:19.225Z,1509049699.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:19.590Z,1509049699.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:19.982Z,1509049699.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:20.385Z,1509049700.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:20.777Z,1509049700.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:21.216Z,1509049701.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:21.587Z,1509049701.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:22.002Z,1509049702.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:22.395Z,1509049702.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:22.803Z,1509049702.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:23.219Z,1509049703.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:23.584Z,1509049703.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:23.981Z,1509049703.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:24.387Z,1509049704.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:24.784Z,1509049704.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:25.218Z,1509049705.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:25.593Z,1509049705.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:25.987Z,1509049705.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:26.390Z,1509049706.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:26.792Z,1509049706.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:27.236Z,1509049707.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:27.581Z,1509049707.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:27.987Z,1509049707.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:28.424Z,1509049708.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:28.792Z,1509049708.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:29.218Z,1509049709.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:29.617Z,1509049709.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:29.985Z,1509049709.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:30.414Z,1509049710.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:30.816Z,1509049710.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:31.207Z,1509049711.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:31.583Z,1509049711.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:31.985Z,1509049711.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:32.390Z,1509049712.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:32.587Z,1509049712.587 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:32.787Z,1509049712.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:33.210Z,1509049713.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:33.387Z,1509049713.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:33.599Z,1509049713.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:33.986Z,1509049713.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:34.098Z,1509049714.098 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:34.396Z,1509049714.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:34.599Z,1509049714.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:34.787Z,1509049714.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:35.222Z,1509049715.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:35.392Z,1509049715.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:35.609Z,1509049715.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:35.797Z,1509049715.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:35.998Z,1509049715.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:36.387Z,1509049716.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:36.590Z,1509049716.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:36.800Z,1509049716.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:37.215Z,1509049717.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:37.392Z,1509049717.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:37.592Z,1509049717.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:37.796Z,1509049717.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:37.986Z,1509049717.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:38.395Z,1509049718.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:38.593Z,1509049718.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:38.790Z,1509049718.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:39.206Z,1509049719.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:39.392Z,1509049719.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:39.585Z,1509049719.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:39.795Z,1509049719.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:39.990Z,1509049719.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:40.413Z,1509049720.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:40.591Z,1509049720.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:40.786Z,1509049720.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:41.212Z,1509049721.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:41.386Z,1509049721.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:41.608Z,1509049721.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:41.790Z,1509049721.790 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:41.981Z,1509049721.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:42.410Z,1509049722.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:42.591Z,1509049722.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:42.850Z,1509049722.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:43.199Z,1509049723.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:43.391Z,1509049723.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:43.582Z,1509049723.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:43.797Z,1509049723.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:44.031Z,1509049724.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:44.395Z,1509049724.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:44.591Z,1509049724.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:44.802Z,1509049724.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:44.995Z,1509049724.995 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:45.245Z,1509049725.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:45.590Z,1509049725.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:45.596Z,1509049725.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:45.986Z,1509049725.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:46.389Z,1509049726.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:46.590Z,1509049726.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:46.807Z,1509049726.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:47.208Z,1509049727.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:47.387Z,1509049727.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:47.604Z,1509049727.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:47.989Z,1509049727.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:48.088Z,1509049728.088 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:48.389Z,1509049728.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:48.792Z,1509049728.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:48.886Z,1509049728.886 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:49.211Z,1509049729.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:49.590Z,1509049729.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:49.597Z,1509049729.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:49.985Z,1509049729.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:50.382Z,1509049730.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:50.384Z,1509049730.384 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:50.783Z,1509049730.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:51.181Z,1509049731.181 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:51.230Z,1509049731.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:51.594Z,1509049731.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:51.605Z,1509049731.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:51.985Z,1509049731.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:52.387Z,1509049732.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:52.403Z,1509049732.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:52.790Z,1509049732.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:53.185Z,1509049733.185 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:53.293Z,1509049733.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:53.589Z,1509049733.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:53.693Z,1509049733.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:54.077Z,1509049734.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:54.482Z,1509049734.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:54.883Z,1509049734.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:55.286Z,1509049735.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:55.705Z,1509049735.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:56.111Z,1509049736.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:56.385Z,1509049736.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:56.480Z,1509049736.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:56.790Z,1509049736.790 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:56.882Z,1509049736.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:57.317Z,1509049737.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:57.410Z,1509049737.410 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:57.704Z,1509049737.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:58.092Z,1509049738.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:58.212Z,1509049738.212 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:58.518Z,1509049738.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:58.616Z,1509049738.616 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:58.837Z,1509049738.837 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:28:58.886Z,1509049738.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:59.316Z,1509049739.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:28:59.394Z,1509049739.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:28:59.715Z,1509049739.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:00.101Z,1509049740.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:00.191Z,1509049740.191 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:00.478Z,1509049740.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:00.600Z,1509049740.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:00.880Z,1509049740.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:01.286Z,1509049741.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:01.393Z,1509049741.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:01.695Z,1509049741.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:01.798Z,1509049741.798 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:02.076Z,1509049742.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:02.483Z,1509049742.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:02.596Z,1509049742.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:02.883Z,1509049742.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:03.289Z,1509049743.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:03.388Z,1509049743.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:03.698Z,1509049743.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:03.793Z,1509049743.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:04.081Z,1509049744.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:04.488Z,1509049744.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:04.588Z,1509049744.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:04.904Z,1509049744.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:05.293Z,1509049745.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:05.387Z,1509049745.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:05.671Z,1509049745.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:05.791Z,1509049745.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:06.098Z,1509049746.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:06.482Z,1509049746.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:06.590Z,1509049746.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:06.903Z,1509049746.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:07.298Z,1509049747.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:07.386Z,1509049747.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:07.692Z,1509049747.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:07.792Z,1509049747.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:08.095Z,1509049748.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:08.482Z,1509049748.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:08.584Z,1509049748.584 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:08.887Z,1509049748.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:09.287Z,1509049749.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:09.399Z,1509049749.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:09.690Z,1509049749.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:09.802Z,1509049749.802 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:10.083Z,1509049750.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:10.492Z,1509049750.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:10.599Z,1509049750.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:10.890Z,1509049750.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:11.294Z,1509049751.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:11.392Z,1509049751.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:11.719Z,1509049751.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:11.797Z,1509049751.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:12.101Z,1509049752.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:12.488Z,1509049752.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:12.591Z,1509049752.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:12.889Z,1509049752.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:13.295Z,1509049753.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:13.391Z,1509049753.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:13.698Z,1509049753.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:13.796Z,1509049753.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:14.083Z,1509049754.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:14.482Z,1509049754.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:14.594Z,1509049754.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:14.876Z,1509049754.876 [BPC1](ERROR): Failed to receive battery data
2017-10-26T20:29:14.876Z,1509049754.876 [BPC1] Communications Fault, FailCount= 1
2017-10-26T20:29:14.876Z,1509049754.876 [BPC1](ERROR): Communications Fault
2017-10-26T20:29:14.905Z,1509049754.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:15.095Z,1509049755.095 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T20:29:15.293Z,1509049755.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:15.391Z,1509049755.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:15.692Z,1509049755.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:15.795Z,1509049755.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:16.094Z,1509049756.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:16.151Z,1509049756.151 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:29:16.151Z,1509049756.151 [BPC1] No Fault, FailCount= 1
2017-10-26T20:29:16.548Z,1509049756.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:16.588Z,1509049756.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:16.882Z,1509049756.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:17.303Z,1509049757.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:17.390Z,1509049757.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:17.686Z,1509049757.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:17.794Z,1509049757.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:18.131Z,1509049758.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:18.494Z,1509049758.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:18.587Z,1509049758.587 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:18.879Z,1509049758.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:19.286Z,1509049759.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:19.389Z,1509049759.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:19.689Z,1509049759.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:19.793Z,1509049759.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:20.102Z,1509049760.102 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:20.102Z,1509049760.102 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 14
2017-10-26T20:29:20.102Z,1509049760.102 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:29:20.108Z,1509049760.108 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:20.108Z,1509049760.108 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 14
2017-10-26T20:29:20.108Z,1509049760.108 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:29:20.194Z,1509049760.194 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:29:20.194Z,1509049760.194 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:29:20.592Z,1509049760.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:20.598Z,1509049760.598 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:29:20.598Z,1509049760.598 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 14
2017-10-26T20:29:20.598Z,1509049760.598 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:29:20.599Z,1509049760.599 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 14
2017-10-26T20:29:20.879Z,1509049760.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:29:20.880Z,1509049760.880 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:29:20.880Z,1509049760.880 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:29:20.899Z,1509049760.899 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:29:20.899Z,1509049760.899 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:29:20.900Z,1509049760.900 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:29:21.270Z,1509049761.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:21.391Z,1509049761.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:21.695Z,1509049761.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:21.796Z,1509049761.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:22.102Z,1509049762.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:22.486Z,1509049762.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:22.593Z,1509049762.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:22.908Z,1509049762.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:23.289Z,1509049763.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:23.391Z,1509049763.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:23.691Z,1509049763.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:23.796Z,1509049763.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:24.078Z,1509049764.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:24.494Z,1509049764.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:24.589Z,1509049764.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:24.885Z,1509049764.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:25.292Z,1509049765.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:25.388Z,1509049765.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:25.687Z,1509049765.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:25.795Z,1509049765.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:26.083Z,1509049766.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:26.489Z,1509049766.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:26.593Z,1509049766.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:26.889Z,1509049766.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:27.305Z,1509049767.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:27.394Z,1509049767.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:27.679Z,1509049767.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:27.798Z,1509049767.798 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:28.077Z,1509049768.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:28.485Z,1509049768.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:28.592Z,1509049768.592 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:28.891Z,1509049768.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:29.294Z,1509049769.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:29.384Z,1509049769.384 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:29.701Z,1509049769.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:29.789Z,1509049769.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:30.120Z,1509049770.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:30.528Z,1509049770.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:30.582Z,1509049770.582 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:31.077Z,1509049771.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:31.379Z,1509049771.379 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:31.466Z,1509049771.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:31.786Z,1509049771.786 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:31.888Z,1509049771.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:32.253Z,1509049772.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:32.577Z,1509049772.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:32.684Z,1509049772.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:33.096Z,1509049773.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:33.374Z,1509049773.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:33.461Z,1509049773.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:33.782Z,1509049773.782 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:33.846Z,1509049773.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:34.254Z,1509049774.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:34.572Z,1509049774.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:34.655Z,1509049774.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:35.073Z,1509049775.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:35.370Z,1509049775.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:35.457Z,1509049775.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:35.774Z,1509049775.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:35.860Z,1509049775.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:36.256Z,1509049776.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:36.571Z,1509049776.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:36.651Z,1509049776.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:36.981Z,1509049776.981 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:37.076Z,1509049777.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:37.389Z,1509049777.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:37.470Z,1509049777.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:37.860Z,1509049777.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:38.194Z,1509049778.194 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:38.258Z,1509049778.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:38.609Z,1509049778.609 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:38.672Z,1509049778.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:39.062Z,1509049779.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:39.380Z,1509049779.380 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:39.466Z,1509049779.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:39.870Z,1509049779.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:40.179Z,1509049780.179 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:40.319Z,1509049780.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:40.642Z,1509049780.642 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:40.676Z,1509049780.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:41.068Z,1509049781.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:41.399Z,1509049781.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:41.474Z,1509049781.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:41.861Z,1509049781.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:42.196Z,1509049782.196 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:42.249Z,1509049782.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:42.600Z,1509049782.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:42.673Z,1509049782.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:43.055Z,1509049783.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:43.381Z,1509049783.381 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:43.487Z,1509049783.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:43.892Z,1509049783.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:44.182Z,1509049784.182 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:44.255Z,1509049784.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:44.604Z,1509049784.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:44.679Z,1509049784.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:45.115Z,1509049785.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:45.381Z,1509049785.381 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:45.554Z,1509049785.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:45.861Z,1509049785.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:46.180Z,1509049786.180 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:46.263Z,1509049786.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:46.603Z,1509049786.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:46.686Z,1509049786.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:47.074Z,1509049787.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:47.388Z,1509049787.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:47.472Z,1509049787.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:47.869Z,1509049787.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:48.201Z,1509049788.201 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:48.292Z,1509049788.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:48.606Z,1509049788.606 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:48.673Z,1509049788.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:49.055Z,1509049789.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:49.375Z,1509049789.375 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:49.465Z,1509049789.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:49.858Z,1509049789.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:50.173Z,1509049790.173 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:50.259Z,1509049790.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:50.597Z,1509049790.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:50.668Z,1509049790.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:51.094Z,1509049791.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:51.370Z,1509049791.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:51.453Z,1509049791.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:51.859Z,1509049791.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:52.174Z,1509049792.174 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:52.269Z,1509049792.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:52.596Z,1509049792.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:52.678Z,1509049792.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:53.060Z,1509049793.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:53.386Z,1509049793.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:53.462Z,1509049793.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:53.855Z,1509049793.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:54.185Z,1509049794.185 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:54.262Z,1509049794.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:54.604Z,1509049794.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:54.654Z,1509049794.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:55.066Z,1509049795.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:55.381Z,1509049795.381 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:55.466Z,1509049795.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:55.867Z,1509049795.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:56.180Z,1509049796.180 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:56.268Z,1509049796.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:56.590Z,1509049796.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:56.707Z,1509049796.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:57.078Z,1509049797.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:57.396Z,1509049797.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:57.465Z,1509049797.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:57.801Z,1509049797.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:57.872Z,1509049797.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:58.257Z,1509049798.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:58.597Z,1509049798.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:58.669Z,1509049798.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:58.998Z,1509049798.998 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:29:59.059Z,1509049799.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:59.381Z,1509049799.381 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:29:59.452Z,1509049799.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:29:59.884Z,1509049799.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:00.180Z,1509049800.180 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:30:00.294Z,1509049800.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:00.600Z,1509049800.600 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:30:00.727Z,1509049800.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:01.066Z,1509049801.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:01.372Z,1509049801.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:30:01.496Z,1509049801.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:01.887Z,1509049801.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:02.171Z,1509049802.171 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:30:02.318Z,1509049802.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:02.615Z,1509049802.615 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:30:02.692Z,1509049802.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:03.095Z,1509049803.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:03.411Z,1509049803.411 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:30:03.467Z,1509049803.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:03.818Z,1509049803.818 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:30:03.868Z,1509049803.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:04.270Z,1509049804.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:04.664Z,1509049804.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:05.085Z,1509049805.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:05.463Z,1509049805.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:05.851Z,1509049805.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:06.258Z,1509049806.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:06.658Z,1509049806.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:07.098Z,1509049807.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:07.450Z,1509049807.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:07.841Z,1509049807.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:08.263Z,1509049808.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:08.655Z,1509049808.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:09.083Z,1509049809.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:09.458Z,1509049809.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:09.849Z,1509049809.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:10.276Z,1509049810.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:10.650Z,1509049810.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:11.081Z,1509049811.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:11.456Z,1509049811.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:11.852Z,1509049811.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:12.260Z,1509049812.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:12.665Z,1509049812.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:13.126Z,1509049813.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:13.495Z,1509049813.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:13.878Z,1509049813.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:14.274Z,1509049814.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:14.696Z,1509049814.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:15.113Z,1509049815.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:15.461Z,1509049815.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:15.875Z,1509049815.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:16.264Z,1509049816.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:16.688Z,1509049816.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:17.134Z,1509049817.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:17.454Z,1509049817.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:17.857Z,1509049817.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:18.282Z,1509049818.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:18.699Z,1509049818.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:19.061Z,1509049819.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:19.444Z,1509049819.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:19.873Z,1509049819.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:20.265Z,1509049820.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:20.657Z,1509049820.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:21.095Z,1509049821.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:21.459Z,1509049821.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:21.856Z,1509049821.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:22.272Z,1509049822.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:22.663Z,1509049822.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:23.082Z,1509049823.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:23.456Z,1509049823.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:23.848Z,1509049823.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:24.272Z,1509049824.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:24.655Z,1509049824.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:25.061Z,1509049825.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:25.455Z,1509049825.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:25.854Z,1509049825.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:26.282Z,1509049826.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:26.661Z,1509049826.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:27.080Z,1509049827.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:27.464Z,1509049827.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:27.840Z,1509049827.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:28.248Z,1509049828.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:28.679Z,1509049828.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:29.107Z,1509049829.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:29.468Z,1509049829.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:29.908Z,1509049829.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:30.270Z,1509049830.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:30.681Z,1509049830.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:31.117Z,1509049831.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:31.475Z,1509049831.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:31.869Z,1509049831.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:32.255Z,1509049832.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:32.657Z,1509049832.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:33.104Z,1509049833.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:33.472Z,1509049833.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:33.892Z,1509049833.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:34.245Z,1509049834.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:34.677Z,1509049834.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:35.115Z,1509049835.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:35.507Z,1509049835.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:35.876Z,1509049835.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:36.261Z,1509049836.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:36.653Z,1509049836.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:37.100Z,1509049837.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:37.480Z,1509049837.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:37.854Z,1509049837.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:38.246Z,1509049838.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:38.653Z,1509049838.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:39.098Z,1509049839.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:39.468Z,1509049839.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:39.857Z,1509049839.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:40.258Z,1509049840.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:40.653Z,1509049840.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:41.085Z,1509049841.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:41.449Z,1509049841.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:41.873Z,1509049841.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:42.250Z,1509049842.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:42.647Z,1509049842.647 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T20:30:42.647Z,1509049842.647 [BPC1] Data Fault, FailCount= 1
2017-10-26T20:30:42.647Z,1509049842.647 [BPC1](ERROR): Data Fault
2017-10-26T20:30:42.681Z,1509049842.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:42.803Z,1509049842.803 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T20:30:43.131Z,1509049843.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:43.451Z,1509049843.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:43.858Z,1509049843.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:43.901Z,1509049843.901 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:30:43.901Z,1509049843.901 [BPC1] No Fault, FailCount= 1
2017-10-26T20:30:44.303Z,1509049844.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:44.671Z,1509049844.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:45.077Z,1509049845.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:45.467Z,1509049845.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:45.862Z,1509049845.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:46.257Z,1509049846.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:46.697Z,1509049846.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:47.066Z,1509049847.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:47.478Z,1509049847.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:47.867Z,1509049847.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:48.262Z,1509049848.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:48.685Z,1509049848.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:49.050Z,1509049849.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:49.455Z,1509049849.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:49.869Z,1509049849.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:50.264Z,1509049850.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:50.699Z,1509049850.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:51.087Z,1509049851.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:51.470Z,1509049851.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:51.864Z,1509049851.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:52.311Z,1509049852.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:52.594Z,1509049852.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:30:52.662Z,1509049852.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:53.084Z,1509049853.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:53.392Z,1509049853.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:30:53.465Z,1509049853.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:53.862Z,1509049853.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:54.283Z,1509049854.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:54.656Z,1509049854.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:55.081Z,1509049855.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:55.456Z,1509049855.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:55.864Z,1509049855.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:56.263Z,1509049856.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:56.654Z,1509049856.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:57.115Z,1509049857.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:57.472Z,1509049857.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:57.865Z,1509049857.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:58.256Z,1509049858.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:58.669Z,1509049858.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:58.999Z,1509049858.999 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:30:59.062Z,1509049859.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:59.470Z,1509049859.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:30:59.894Z,1509049859.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:00.258Z,1509049860.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:00.816Z,1509049860.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:01.229Z,1509049861.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:01.613Z,1509049861.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:02.016Z,1509049862.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:02.417Z,1509049862.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:02.810Z,1509049862.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:03.273Z,1509049863.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:03.636Z,1509049863.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:04.031Z,1509049864.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:04.409Z,1509049864.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:04.808Z,1509049864.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:05.241Z,1509049865.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:05.618Z,1509049865.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:06.035Z,1509049866.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:06.403Z,1509049866.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:06.809Z,1509049866.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:07.231Z,1509049867.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:07.611Z,1509049867.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:08.024Z,1509049868.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:08.412Z,1509049868.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:08.815Z,1509049868.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:09.231Z,1509049869.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:09.387Z,1509049869.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:31:09.617Z,1509049869.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:09.796Z,1509049869.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:31:10.026Z,1509049870.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:10.412Z,1509049870.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:10.810Z,1509049870.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:11.247Z,1509049871.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:11.669Z,1509049871.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:12.013Z,1509049872.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:12.418Z,1509049872.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:12.823Z,1509049872.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:13.236Z,1509049873.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:13.618Z,1509049873.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:14.021Z,1509049874.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:14.426Z,1509049874.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:14.809Z,1509049874.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:15.237Z,1509049875.237 [BPC1](ERROR): Failed to receive battery data
2017-10-26T20:31:15.237Z,1509049875.237 [BPC1] Communications Fault, FailCount= 1
2017-10-26T20:31:15.237Z,1509049875.237 [BPC1](ERROR): Communications Fault
2017-10-26T20:31:15.259Z,1509049875.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:15.366Z,1509049875.366 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T20:31:15.599Z,1509049875.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:16.012Z,1509049876.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:16.417Z,1509049876.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:16.487Z,1509049876.487 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:31:16.487Z,1509049876.487 [BPC1] No Fault, FailCount= 1
2017-10-26T20:31:16.873Z,1509049876.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:17.258Z,1509049877.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:17.618Z,1509049877.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:18.010Z,1509049878.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:18.420Z,1509049878.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:18.818Z,1509049878.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:19.271Z,1509049879.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:19.626Z,1509049879.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:20.009Z,1509049880.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:20.410Z,1509049880.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:20.827Z,1509049880.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:21.252Z,1509049881.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:21.382Z,1509049881.382 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:31:21.612Z,1509049881.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:21.787Z,1509049881.787 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:31:22.007Z,1509049882.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:22.423Z,1509049882.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:22.581Z,1509049882.581 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:31:22.812Z,1509049882.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:23.261Z,1509049883.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:23.377Z,1509049883.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:31:23.621Z,1509049883.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:24.021Z,1509049884.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:24.176Z,1509049884.176 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:31:24.417Z,1509049884.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:24.591Z,1509049884.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:31:24.824Z,1509049884.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:25.239Z,1509049885.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:25.387Z,1509049885.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:31:25.613Z,1509049885.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:25.797Z,1509049885.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:31:26.008Z,1509049886.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:26.411Z,1509049886.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:26.590Z,1509049886.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:31:26.812Z,1509049886.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:27.244Z,1509049887.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:27.383Z,1509049887.383 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:31:27.622Z,1509049887.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:27.788Z,1509049887.788 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:31:28.027Z,1509049888.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:28.426Z,1509049888.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:28.820Z,1509049888.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:29.245Z,1509049889.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:29.618Z,1509049889.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:30.016Z,1509049890.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:30.428Z,1509049890.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:30.828Z,1509049890.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:31.248Z,1509049891.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:31.654Z,1509049891.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:32.013Z,1509049892.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:32.445Z,1509049892.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:32.816Z,1509049892.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:33.267Z,1509049893.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:33.615Z,1509049893.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:34.065Z,1509049894.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:34.444Z,1509049894.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:35.036Z,1509049895.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:35.382Z,1509049895.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:35.755Z,1509049895.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:36.197Z,1509049896.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:36.571Z,1509049896.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:37.035Z,1509049897.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:37.363Z,1509049897.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:37.775Z,1509049897.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:38.146Z,1509049898.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:38.584Z,1509049898.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:39.049Z,1509049899.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:39.386Z,1509049899.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:39.770Z,1509049899.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:40.194Z,1509049900.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:40.589Z,1509049900.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:41.046Z,1509049901.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:41.383Z,1509049901.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:41.758Z,1509049901.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:42.189Z,1509049902.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:42.563Z,1509049902.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:43.039Z,1509049903.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:43.382Z,1509049903.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:43.772Z,1509049903.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:44.148Z,1509049904.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:44.556Z,1509049904.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:45.065Z,1509049905.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:45.376Z,1509049905.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:45.778Z,1509049905.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:46.198Z,1509049906.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:46.607Z,1509049906.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:47.031Z,1509049907.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:47.419Z,1509049907.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:47.766Z,1509049907.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:48.218Z,1509049908.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:48.596Z,1509049908.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:49.047Z,1509049909.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:49.385Z,1509049909.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:49.783Z,1509049909.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:50.189Z,1509049910.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:50.569Z,1509049910.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:51.030Z,1509049911.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:51.389Z,1509049911.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:51.790Z,1509049911.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:52.197Z,1509049912.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:52.562Z,1509049912.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:53.024Z,1509049913.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:53.387Z,1509049913.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:53.757Z,1509049913.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:54.198Z,1509049914.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:54.554Z,1509049914.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:55.033Z,1509049915.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:55.382Z,1509049915.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:55.750Z,1509049915.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:56.192Z,1509049916.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:56.548Z,1509049916.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:57.046Z,1509049917.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:57.380Z,1509049917.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:57.769Z,1509049917.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:58.157Z,1509049918.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:58.566Z,1509049918.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:59.042Z,1509049919.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:59.315Z,1509049919.315 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:31:59.399Z,1509049919.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:31:59.996Z,1509049919.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:00.409Z,1509049920.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:00.780Z,1509049920.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:01.230Z,1509049921.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:01.576Z,1509049921.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:02.021Z,1509049922.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:02.381Z,1509049922.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:02.812Z,1509049922.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:03.221Z,1509049923.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:03.582Z,1509049923.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:03.984Z,1509049923.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:04.387Z,1509049924.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:04.789Z,1509049924.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:05.202Z,1509049925.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:05.573Z,1509049925.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:05.974Z,1509049925.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:06.400Z,1509049926.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:06.775Z,1509049926.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:07.213Z,1509049927.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:07.581Z,1509049927.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:07.982Z,1509049927.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:08.390Z,1509049928.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:08.802Z,1509049928.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:09.224Z,1509049929.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:09.577Z,1509049929.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:09.981Z,1509049929.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:10.381Z,1509049930.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:10.778Z,1509049930.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:11.228Z,1509049931.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:11.581Z,1509049931.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:11.994Z,1509049931.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:12.386Z,1509049932.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:12.793Z,1509049932.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:13.270Z,1509049933.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:13.589Z,1509049933.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:13.979Z,1509049933.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:14.381Z,1509049934.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:14.831Z,1509049934.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:15.219Z,1509049935.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:15.590Z,1509049935.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:16.005Z,1509049936.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:16.386Z,1509049936.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:16.795Z,1509049936.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:17.246Z,1509049937.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:17.580Z,1509049937.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:17.978Z,1509049937.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:18.382Z,1509049938.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:18.789Z,1509049938.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:19.199Z,1509049939.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:19.593Z,1509049939.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:19.986Z,1509049939.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:20.392Z,1509049940.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:20.779Z,1509049940.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:21.212Z,1509049941.212 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:21.212Z,1509049941.212 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 15
2017-10-26T20:32:21.212Z,1509049941.212 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:32:21.220Z,1509049941.220 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:21.220Z,1509049941.220 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 15
2017-10-26T20:32:21.221Z,1509049941.221 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:32:21.325Z,1509049941.325 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:32:21.325Z,1509049941.325 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:32:21.756Z,1509049941.756 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:32:21.757Z,1509049941.757 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 15
2017-10-26T20:32:21.757Z,1509049941.757 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:32:21.757Z,1509049941.757 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 15
2017-10-26T20:32:21.978Z,1509049941.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:32:21.979Z,1509049941.979 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:32:21.979Z,1509049941.979 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:32:21.981Z,1509049941.981 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:32:21.982Z,1509049941.982 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:32:21.982Z,1509049941.982 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:32:22.389Z,1509049942.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:22.787Z,1509049942.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:23.208Z,1509049943.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:23.586Z,1509049943.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:23.985Z,1509049943.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:24.413Z,1509049944.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:24.782Z,1509049944.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:25.220Z,1509049945.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:25.596Z,1509049945.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:25.984Z,1509049945.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:26.407Z,1509049946.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:26.786Z,1509049946.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:27.205Z,1509049947.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:27.582Z,1509049947.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:28.031Z,1509049948.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:28.388Z,1509049948.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:28.783Z,1509049948.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:29.200Z,1509049949.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:29.610Z,1509049949.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:29.993Z,1509049949.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:30.411Z,1509049950.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:30.775Z,1509049950.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:31.237Z,1509049951.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:31.613Z,1509049951.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:31.973Z,1509049951.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:32.386Z,1509049952.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:32.780Z,1509049952.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:33.212Z,1509049953.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:33.593Z,1509049953.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:33.989Z,1509049953.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:34.388Z,1509049954.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:34.909Z,1509049954.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:35.291Z,1509049955.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:35.729Z,1509049955.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:36.094Z,1509049956.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:36.497Z,1509049956.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:36.901Z,1509049956.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:37.284Z,1509049957.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:37.693Z,1509049957.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:38.098Z,1509049958.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:38.494Z,1509049958.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:38.902Z,1509049958.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:39.302Z,1509049959.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:39.712Z,1509049959.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:40.107Z,1509049960.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:40.514Z,1509049960.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:40.897Z,1509049960.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:41.330Z,1509049961.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:41.717Z,1509049961.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:42.096Z,1509049962.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:42.534Z,1509049962.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:42.903Z,1509049962.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:43.308Z,1509049963.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:43.739Z,1509049963.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:44.092Z,1509049964.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:44.534Z,1509049964.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:44.899Z,1509049964.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:45.318Z,1509049965.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:45.693Z,1509049965.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:46.127Z,1509049966.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:46.503Z,1509049966.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:46.900Z,1509049966.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:47.305Z,1509049967.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:47.795Z,1509049967.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:48.218Z,1509049968.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:48.613Z,1509049968.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:49.054Z,1509049969.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:49.385Z,1509049969.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:49.777Z,1509049969.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:50.214Z,1509049970.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:50.587Z,1509049970.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:51.046Z,1509049971.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:51.396Z,1509049971.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:51.801Z,1509049971.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:52.218Z,1509049972.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:52.597Z,1509049972.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:53.078Z,1509049973.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:53.410Z,1509049973.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:53.783Z,1509049973.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:54.212Z,1509049974.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:54.592Z,1509049974.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:55.049Z,1509049975.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:55.399Z,1509049975.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:55.796Z,1509049975.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:56.211Z,1509049976.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:56.606Z,1509049976.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:57.134Z,1509049977.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:57.399Z,1509049977.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:57.789Z,1509049977.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:58.246Z,1509049978.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:58.587Z,1509049978.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:59.083Z,1509049979.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:59.396Z,1509049979.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:32:59.730Z,1509049979.730 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:32:59.814Z,1509049979.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:00.245Z,1509049980.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:00.600Z,1509049980.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:01.033Z,1509049981.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:01.400Z,1509049981.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:01.787Z,1509049981.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:02.201Z,1509049982.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:02.598Z,1509049982.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:03.061Z,1509049983.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:03.411Z,1509049983.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:03.775Z,1509049983.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:04.208Z,1509049984.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:04.607Z,1509049984.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:05.071Z,1509049985.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:05.389Z,1509049985.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:05.785Z,1509049985.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:06.219Z,1509049986.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:06.588Z,1509049986.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:07.045Z,1509049987.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:07.394Z,1509049987.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:07.399Z,1509049987.399 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:07.795Z,1509049987.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:07.803Z,1509049987.803 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:08.215Z,1509049988.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:08.591Z,1509049988.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:08.597Z,1509049988.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:09.029Z,1509049989.029 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-26T20:33:09.074Z,1509049989.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:09.391Z,1509049989.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:09.404Z,1509049989.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:09.783Z,1509049989.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:10.187Z,1509049990.187 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:10.210Z,1509049990.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:10.591Z,1509049990.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:10.632Z,1509049990.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:11.056Z,1509049991.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:11.385Z,1509049991.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:11.388Z,1509049991.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:11.789Z,1509049991.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:11.806Z,1509049991.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:12.259Z,1509049992.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:12.584Z,1509049992.584 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:12.609Z,1509049992.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:13.045Z,1509049993.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:13.384Z,1509049993.384 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:13.422Z,1509049993.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:13.785Z,1509049993.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:13.788Z,1509049993.788 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:14.234Z,1509049994.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:14.582Z,1509049994.582 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:14.600Z,1509049994.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:15.038Z,1509049995.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:15.379Z,1509049995.379 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:15.391Z,1509049995.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:15.786Z,1509049995.786 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:15.795Z,1509049995.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:16.203Z,1509049996.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:16.581Z,1509049996.581 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:16.590Z,1509049996.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:17.015Z,1509049997.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:17.378Z,1509049997.378 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:17.416Z,1509049997.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:17.783Z,1509049997.783 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:17.793Z,1509049997.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:18.197Z,1509049998.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:18.578Z,1509049998.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:18.580Z,1509049998.580 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:19.057Z,1509049999.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:19.379Z,1509049999.379 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:19.411Z,1509049999.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:19.787Z,1509049999.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:19.790Z,1509049999.790 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:20.218Z,1509050000.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:20.579Z,1509050000.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:20.586Z,1509050000.586 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:20.996Z,1509050000.996 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:21.052Z,1509050001.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:21.395Z,1509050001.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:21.408Z,1509050001.408 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:21.787Z,1509050001.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:22.200Z,1509050002.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:22.205Z,1509050002.205 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:22.588Z,1509050002.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:22.610Z,1509050002.610 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:23.068Z,1509050003.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:23.392Z,1509050003.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:23.404Z,1509050003.404 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:23.780Z,1509050003.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:24.201Z,1509050004.201 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:24.217Z,1509050004.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:24.596Z,1509050004.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:24.605Z,1509050004.605 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:33:25.068Z,1509050005.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:25.397Z,1509050005.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:25.791Z,1509050005.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:26.194Z,1509050006.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:26.584Z,1509050006.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:27.081Z,1509050007.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:27.397Z,1509050007.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:27.821Z,1509050007.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:28.227Z,1509050008.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:28.614Z,1509050008.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:29.064Z,1509050009.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:29.387Z,1509050009.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:29.800Z,1509050009.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:30.208Z,1509050010.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:30.585Z,1509050010.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:31.046Z,1509050011.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:31.377Z,1509050011.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:31.805Z,1509050011.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:32.209Z,1509050012.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:32.596Z,1509050012.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:33.041Z,1509050013.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:33.421Z,1509050013.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:33.768Z,1509050013.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:34.211Z,1509050014.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:34.608Z,1509050014.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:35.071Z,1509050015.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:35.403Z,1509050015.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:35.786Z,1509050015.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:36.220Z,1509050016.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:36.600Z,1509050016.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:37.041Z,1509050017.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:37.380Z,1509050017.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:37.785Z,1509050017.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:38.206Z,1509050018.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:38.585Z,1509050018.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:39.022Z,1509050019.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:39.394Z,1509050019.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:39.852Z,1509050019.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:40.205Z,1509050020.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:40.584Z,1509050020.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:41.101Z,1509050021.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:41.395Z,1509050021.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:41.783Z,1509050021.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:42.249Z,1509050022.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:42.571Z,1509050022.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:43.076Z,1509050023.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:43.408Z,1509050023.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:43.814Z,1509050023.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:44.214Z,1509050024.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:44.574Z,1509050024.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:45.056Z,1509050025.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:45.389Z,1509050025.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:45.808Z,1509050025.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:46.207Z,1509050026.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:46.600Z,1509050026.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:47.057Z,1509050027.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:47.375Z,1509050027.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:47.801Z,1509050027.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:48.208Z,1509050028.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:48.599Z,1509050028.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:49.036Z,1509050029.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:49.438Z,1509050029.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:49.784Z,1509050029.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:50.203Z,1509050030.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:50.583Z,1509050030.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:51.076Z,1509050031.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:51.401Z,1509050031.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:51.793Z,1509050031.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:52.206Z,1509050032.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:52.597Z,1509050032.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:53.072Z,1509050033.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:53.395Z,1509050033.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:53.768Z,1509050033.768 [PNI_TCM](ERROR): CRC does not match. Expected:0x13764 got:0x10501
2017-10-26T20:33:53.792Z,1509050033.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:54.214Z,1509050034.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:54.612Z,1509050034.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:55.068Z,1509050035.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:55.614Z,1509050035.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:56.022Z,1509050036.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:56.453Z,1509050036.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:56.822Z,1509050036.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:57.232Z,1509050037.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:57.643Z,1509050037.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:58.026Z,1509050038.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:58.448Z,1509050038.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:58.846Z,1509050038.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:59.240Z,1509050039.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:59.630Z,1509050039.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:33:59.972Z,1509050039.972 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:34:00.013Z,1509050040.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:00.414Z,1509050040.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:00.813Z,1509050040.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:01.254Z,1509050041.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:01.629Z,1509050041.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:02.017Z,1509050042.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:02.422Z,1509050042.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:02.838Z,1509050042.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:03.248Z,1509050043.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:03.635Z,1509050043.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:04.017Z,1509050044.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:04.416Z,1509050044.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:04.828Z,1509050044.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:05.257Z,1509050045.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:05.618Z,1509050045.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:06.030Z,1509050046.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:06.428Z,1509050046.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:06.825Z,1509050046.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:07.244Z,1509050047.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:07.632Z,1509050047.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:08.035Z,1509050048.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:08.415Z,1509050048.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:08.820Z,1509050048.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:09.241Z,1509050049.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:09.623Z,1509050049.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:10.025Z,1509050050.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:10.436Z,1509050050.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:10.863Z,1509050050.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:11.282Z,1509050051.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:11.626Z,1509050051.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:12.024Z,1509050052.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:12.454Z,1509050052.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:12.814Z,1509050052.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:13.246Z,1509050053.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:13.645Z,1509050053.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:14.020Z,1509050054.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:14.416Z,1509050054.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:14.426Z,1509050054.426 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:H.](IMPORTANT): Reached target confidence level 99.900%. Confidence in buoyancy estimate: 99.899999%, Confidence in mass estimate: 99.928901%.
2017-10-26T20:34:14.427Z,1509050054.427 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:H.](IMPORTANT): BallastAndTrim complete. Estimated buoyancyNeutral : 588.420058 +/- 38.147180 cc, estimated massDefault: -7.651256 +/- 0.804142 mm.
2017-10-26T20:34:14.427Z,1509050054.427 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:H.] Stopped
2017-10-26T20:34:14.427Z,1509050054.427 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:H.](INFO): Uninitializing BallastAndTrim.
2017-10-26T20:34:14.458Z,1509050054.458 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim](INFO): Completed ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim
2017-10-26T20:34:14.458Z,1509050054.458 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim] Stopped
2017-10-26T20:34:14.458Z,1509050054.458 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim](DEBUG): Aggregate::uninitialize ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim
2017-10-26T20:34:14.458Z,1509050054.458 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:A] Stopped
2017-10-26T20:34:14.458Z,1509050054.458 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:B] Stopped
2017-10-26T20:34:14.458Z,1509050054.458 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:C] Stopped
2017-10-26T20:34:14.458Z,1509050054.458 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:D] Stopped
2017-10-26T20:34:14.458Z,1509050054.458 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:E.SetSpeed] Stopped
2017-10-26T20:34:14.458Z,1509050054.458 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:E.SetSpeed](DEBUG): Uninitialize.
2017-10-26T20:34:14.458Z,1509050054.458 [ballast_and_trim:RunBallastAndTrim:Depth1:BallastAndTrim:F.Pitch] Stopped
2017-10-26T20:34:14.459Z,1509050054.459 [ballast_and_trim:RunBallastAndTrim:Depth1](INFO): Completed ballast_and_trim:RunBallastAndTrim:Depth1
2017-10-26T20:34:14.459Z,1509050054.459 [ballast_and_trim:RunBallastAndTrim:Depth1] Stopped
2017-10-26T20:34:14.459Z,1509050054.459 [ballast_and_trim:RunBallastAndTrim:Depth1](DEBUG): Aggregate::uninitialize ballast_and_trim:RunBallastAndTrim:Depth1
2017-10-26T20:34:14.459Z,1509050054.459 [ballast_and_trim:RunBallastAndTrim:Depth2] Running Loop=1
2017-10-26T20:34:14.459Z,1509050054.459 [ballast_and_trim:RunBallastAndTrim:Depth2](DEBUG): Aggregate::initialize ballast_and_trim:RunBallastAndTrim:Depth2
2017-10-26T20:34:14.459Z,1509050054.459 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim] Running Loop=1
2017-10-26T20:34:14.460Z,1509050054.460 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim](DEBUG): Aggregate::initialize ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim
2017-10-26T20:34:14.460Z,1509050054.460 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:A] Running Loop=1
2017-10-26T20:34:14.460Z,1509050054.460 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:B] Running Loop=1
2017-10-26T20:34:14.460Z,1509050054.460 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:C] Running Loop=1
2017-10-26T20:34:14.460Z,1509050054.460 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:D] Running Loop=1
2017-10-26T20:34:14.460Z,1509050054.460 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:E.SetSpeed] Running Loop=1
2017-10-26T20:34:14.460Z,1509050054.460 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:E.SetSpeed](DEBUG): Initialize.
2017-10-26T20:34:14.460Z,1509050054.460 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:F.Pitch] Running Loop=1
2017-10-26T20:34:14.460Z,1509050054.460 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:F.Pitch](DEBUG): Initialize.
2017-10-26T20:34:14.830Z,1509050054.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:14.892Z,1509050054.892 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:E.SetSpeed] Running Loop=1
2017-10-26T20:34:14.899Z,1509050054.899 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:D] Running Loop=1
2017-10-26T20:34:14.902Z,1509050054.902 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:C] Running Loop=1
2017-10-26T20:34:14.906Z,1509050054.906 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:B] Running Loop=1
2017-10-26T20:34:14.916Z,1509050054.916 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:A] Running Loop=1
2017-10-26T20:34:15.236Z,1509050055.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:15.617Z,1509050055.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:16.023Z,1509050056.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:16.426Z,1509050056.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:16.825Z,1509050056.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:17.240Z,1509050057.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:17.630Z,1509050057.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:18.026Z,1509050058.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:18.429Z,1509050058.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:18.866Z,1509050058.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:19.230Z,1509050059.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:19.621Z,1509050059.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:20.027Z,1509050060.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:20.132Z,1509050060.132 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T20:34:20.434Z,1509050060.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:20.824Z,1509050060.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:21.222Z,1509050061.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:21.617Z,1509050061.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:22.021Z,1509050062.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:22.417Z,1509050062.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:22.839Z,1509050062.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:23.230Z,1509050063.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:23.633Z,1509050063.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:24.037Z,1509050064.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:24.412Z,1509050064.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:24.813Z,1509050064.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:25.241Z,1509050065.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:25.646Z,1509050065.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:26.058Z,1509050066.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:26.421Z,1509050066.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:26.856Z,1509050066.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:27.231Z,1509050067.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:27.657Z,1509050067.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:28.043Z,1509050068.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:28.432Z,1509050068.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:28.833Z,1509050068.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:29.244Z,1509050069.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:29.649Z,1509050069.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:30.016Z,1509050070.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:30.416Z,1509050070.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:30.820Z,1509050070.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:31.256Z,1509050071.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:31.625Z,1509050071.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:32.018Z,1509050072.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:32.417Z,1509050072.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:32.822Z,1509050072.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:33.233Z,1509050073.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:33.763Z,1509050073.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:34.151Z,1509050074.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:34.551Z,1509050074.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:35.027Z,1509050075.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:35.349Z,1509050075.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:35.763Z,1509050075.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:36.145Z,1509050076.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:36.551Z,1509050076.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:36.989Z,1509050076.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:37.344Z,1509050077.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:37.749Z,1509050077.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:38.152Z,1509050078.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:38.561Z,1509050078.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:38.944Z,1509050078.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:39.353Z,1509050079.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:39.827Z,1509050079.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:40.133Z,1509050080.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:40.561Z,1509050080.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:41.025Z,1509050081.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:41.346Z,1509050081.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:41.797Z,1509050081.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:42.199Z,1509050082.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:42.542Z,1509050082.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:42.947Z,1509050082.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:43.349Z,1509050083.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:43.752Z,1509050083.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:44.151Z,1509050084.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:44.535Z,1509050084.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:45.042Z,1509050085.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:45.534Z,1509050085.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:45.956Z,1509050085.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:46.344Z,1509050086.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:46.739Z,1509050086.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:47.207Z,1509050087.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:47.540Z,1509050087.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:47.964Z,1509050087.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:48.332Z,1509050088.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:48.753Z,1509050088.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:49.137Z,1509050089.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:49.536Z,1509050089.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:49.949Z,1509050089.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:50.339Z,1509050090.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:50.782Z,1509050090.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:51.154Z,1509050091.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:51.525Z,1509050091.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:51.939Z,1509050091.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:52.343Z,1509050092.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:52.928Z,1509050092.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:53.305Z,1509050093.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:53.734Z,1509050093.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:54.138Z,1509050094.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:54.551Z,1509050094.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:54.912Z,1509050094.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:55.336Z,1509050095.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:55.697Z,1509050095.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:56.192Z,1509050096.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:56.538Z,1509050096.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:56.903Z,1509050096.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:57.316Z,1509050097.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:57.713Z,1509050097.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:58.117Z,1509050098.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:58.497Z,1509050098.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:58.916Z,1509050098.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:59.318Z,1509050099.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:34:59.711Z,1509050099.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:00.062Z,1509050100.062 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:35:00.117Z,1509050100.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:00.508Z,1509050100.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:00.912Z,1509050100.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:01.323Z,1509050101.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:01.702Z,1509050101.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:02.111Z,1509050102.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:02.516Z,1509050102.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:02.901Z,1509050102.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:03.407Z,1509050103.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:03.719Z,1509050103.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:04.119Z,1509050104.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:04.550Z,1509050104.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:04.910Z,1509050104.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:05.316Z,1509050105.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:05.743Z,1509050105.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:06.109Z,1509050106.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:06.514Z,1509050106.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:06.919Z,1509050106.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:07.335Z,1509050107.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:07.760Z,1509050107.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:08.105Z,1509050108.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:08.559Z,1509050108.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:08.996Z,1509050108.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:09.321Z,1509050109.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:09.712Z,1509050109.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:10.143Z,1509050110.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:10.500Z,1509050110.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:10.933Z,1509050110.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:11.356Z,1509050111.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:11.710Z,1509050111.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:12.115Z,1509050112.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:12.515Z,1509050112.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:12.924Z,1509050112.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:13.301Z,1509050113.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:13.707Z,1509050113.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:14.107Z,1509050114.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:14.512Z,1509050114.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:15.070Z,1509050115.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:15.430Z,1509050115.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:15.834Z,1509050115.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:16.233Z,1509050116.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:16.627Z,1509050116.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:17.081Z,1509050117.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:17.421Z,1509050117.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:17.799Z,1509050117.799 [PNI_TCM](ERROR): CRC does not match. Expected:0x35769 got:0x41271
2017-10-26T20:35:17.827Z,1509050117.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:18.211Z,1509050118.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:18.616Z,1509050118.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:19.076Z,1509050119.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:19.423Z,1509050119.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:19.810Z,1509050119.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:20.239Z,1509050120.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:20.613Z,1509050120.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:21.064Z,1509050121.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:21.435Z,1509050121.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:21.809Z,1509050121.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:22.229Z,1509050122.229 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:22.229Z,1509050122.229 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 16
2017-10-26T20:35:22.229Z,1509050122.229 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:35:22.233Z,1509050122.233 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:22.233Z,1509050122.233 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 16
2017-10-26T20:35:22.233Z,1509050122.233 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:35:22.333Z,1509050122.333 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:35:22.334Z,1509050122.334 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:35:22.624Z,1509050122.624 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T20:35:22.624Z,1509050122.624 [BPC1] Data Fault, FailCount= 1
2017-10-26T20:35:22.624Z,1509050122.624 [BPC1](ERROR): Data Fault
2017-10-26T20:35:22.758Z,1509050122.758 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:35:22.758Z,1509050122.758 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 16
2017-10-26T20:35:22.759Z,1509050122.759 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:35:22.759Z,1509050122.759 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 16
2017-10-26T20:35:22.768Z,1509050122.768 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T20:35:22.999Z,1509050122.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:35:22.999Z,1509050122.999 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:35:22.000Z,1509050123.000 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:35:23.058Z,1509050123.058 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:35:23.060Z,1509050123.060 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:35:23.069Z,1509050123.069 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:35:23.419Z,1509050123.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:23.817Z,1509050123.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:24.305Z,1509050124.305 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:35:24.305Z,1509050124.305 [BPC1] No Fault, FailCount= 1
2017-10-26T20:35:24.365Z,1509050124.365 [PNI_TCM](ERROR): CRC does not match. Expected:0x40980 got:0x22102
2017-10-26T20:35:24.441Z,1509050124.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:24.773Z,1509050124.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:25.232Z,1509050125.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:25.583Z,1509050125.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:25.985Z,1509050125.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:26.371Z,1509050126.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:26.786Z,1509050126.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:27.190Z,1509050127.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:27.626Z,1509050127.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:27.983Z,1509050127.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:28.369Z,1509050128.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:28.783Z,1509050128.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:29.231Z,1509050129.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:29.563Z,1509050129.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:29.972Z,1509050129.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:30.371Z,1509050130.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:30.776Z,1509050130.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:31.203Z,1509050131.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:31.585Z,1509050131.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:31.982Z,1509050131.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:32.377Z,1509050132.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:32.786Z,1509050132.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:33.197Z,1509050133.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:33.568Z,1509050133.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:33.974Z,1509050133.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:34.373Z,1509050134.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:34.789Z,1509050134.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:35.195Z,1509050135.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:35.576Z,1509050135.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:35.985Z,1509050135.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:36.364Z,1509050136.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:36.761Z,1509050136.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:37.258Z,1509050137.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:37.603Z,1509050137.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:37.973Z,1509050137.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:38.418Z,1509050138.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:38.775Z,1509050138.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:39.228Z,1509050139.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:39.613Z,1509050139.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:39.973Z,1509050139.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:40.383Z,1509050140.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:40.775Z,1509050140.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:41.200Z,1509050141.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:41.571Z,1509050141.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:41.990Z,1509050141.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:42.378Z,1509050142.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:42.776Z,1509050142.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:43.180Z,1509050143.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:43.573Z,1509050143.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:44.004Z,1509050144.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:44.371Z,1509050144.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:44.769Z,1509050144.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:45.212Z,1509050145.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:45.585Z,1509050145.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:45.986Z,1509050145.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:46.383Z,1509050146.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:46.788Z,1509050146.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:47.201Z,1509050147.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:47.571Z,1509050147.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:47.974Z,1509050147.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:48.373Z,1509050148.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:48.778Z,1509050148.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:49.199Z,1509050149.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:49.586Z,1509050149.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:49.963Z,1509050149.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:50.366Z,1509050150.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:50.772Z,1509050150.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:51.209Z,1509050151.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:51.619Z,1509050151.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:52.023Z,1509050152.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:52.375Z,1509050152.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:52.772Z,1509050152.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:53.230Z,1509050153.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:53.563Z,1509050153.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:54.000Z,1509050154.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:54.400Z,1509050154.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:54.777Z,1509050154.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:55.205Z,1509050155.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:55.572Z,1509050155.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:55.958Z,1509050155.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:56.394Z,1509050156.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:56.805Z,1509050156.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:57.199Z,1509050157.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:57.575Z,1509050157.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:57.975Z,1509050157.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:58.378Z,1509050158.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:58.776Z,1509050158.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:59.199Z,1509050159.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:59.587Z,1509050159.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:35:59.987Z,1509050159.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:00.386Z,1509050160.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:00.720Z,1509050160.720 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:36:00.772Z,1509050160.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:01.209Z,1509050161.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:01.573Z,1509050161.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:02.132Z,1509050162.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:02.528Z,1509050162.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:02.930Z,1509050162.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:03.349Z,1509050163.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:03.725Z,1509050163.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:04.127Z,1509050164.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:04.533Z,1509050164.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:04.931Z,1509050164.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:05.347Z,1509050165.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:05.731Z,1509050165.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:06.195Z,1509050166.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:06.595Z,1509050166.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:06.932Z,1509050166.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:07.386Z,1509050167.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:07.737Z,1509050167.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:08.196Z,1509050168.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:08.543Z,1509050168.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:09.026Z,1509050169.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:09.337Z,1509050169.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:09.728Z,1509050169.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:10.133Z,1509050170.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:10.702Z,1509050170.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:11.122Z,1509050171.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:11.507Z,1509050171.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:11.901Z,1509050171.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:12.304Z,1509050172.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:12.702Z,1509050172.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:13.159Z,1509050173.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:13.525Z,1509050173.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:13.910Z,1509050173.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:14.311Z,1509050174.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:14.715Z,1509050174.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:15.197Z,1509050175.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:15.528Z,1509050175.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:15.911Z,1509050175.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:16.313Z,1509050176.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:16.751Z,1509050176.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:17.109Z,1509050177.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:17.523Z,1509050177.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:17.914Z,1509050177.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:18.333Z,1509050178.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:18.703Z,1509050178.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:19.106Z,1509050179.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:19.515Z,1509050179.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:19.916Z,1509050179.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:20.316Z,1509050180.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:20.729Z,1509050180.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:21.122Z,1509050181.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:21.530Z,1509050181.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:21.933Z,1509050181.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:22.335Z,1509050182.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:22.747Z,1509050182.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:23.140Z,1509050183.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:23.501Z,1509050183.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:23.901Z,1509050183.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:24.309Z,1509050184.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:24.723Z,1509050184.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:25.235Z,1509050185.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:25.635Z,1509050185.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:26.027Z,1509050186.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:26.418Z,1509050186.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:26.849Z,1509050186.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:27.227Z,1509050187.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:27.624Z,1509050187.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:28.082Z,1509050188.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:28.422Z,1509050188.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:28.821Z,1509050188.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:29.229Z,1509050189.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:29.634Z,1509050189.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:30.034Z,1509050190.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:30.415Z,1509050190.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:30.825Z,1509050190.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:31.224Z,1509050191.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:31.619Z,1509050191.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:32.027Z,1509050192.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:32.435Z,1509050192.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:32.835Z,1509050192.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:33.243Z,1509050193.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:33.617Z,1509050193.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:34.050Z,1509050194.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:34.422Z,1509050194.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:34.877Z,1509050194.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:35.255Z,1509050195.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:35.652Z,1509050195.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:36.033Z,1509050196.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:36.469Z,1509050196.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:36.872Z,1509050196.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:37.231Z,1509050197.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:37.632Z,1509050197.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:38.015Z,1509050198.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:38.436Z,1509050198.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:38.812Z,1509050198.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:39.257Z,1509050199.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:39.758Z,1509050199.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:40.137Z,1509050200.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:40.539Z,1509050200.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:40.947Z,1509050200.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:41.343Z,1509050201.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:41.754Z,1509050201.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:42.148Z,1509050202.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:42.539Z,1509050202.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:42.927Z,1509050202.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:43.341Z,1509050203.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:43.761Z,1509050203.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:44.140Z,1509050204.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:44.531Z,1509050204.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:45.002Z,1509050205.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:45.344Z,1509050205.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:45.750Z,1509050205.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:46.156Z,1509050206.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:46.526Z,1509050206.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:47.010Z,1509050207.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:47.340Z,1509050207.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:47.743Z,1509050207.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:48.200Z,1509050208.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:48.547Z,1509050208.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:49.029Z,1509050209.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:49.342Z,1509050209.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:49.777Z,1509050209.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:50.149Z,1509050210.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:50.603Z,1509050210.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:51.025Z,1509050211.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:51.373Z,1509050211.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:51.737Z,1509050211.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:52.144Z,1509050212.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:52.543Z,1509050212.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:52.996Z,1509050212.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:53.349Z,1509050213.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:53.733Z,1509050213.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:54.139Z,1509050214.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:54.540Z,1509050214.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:55.031Z,1509050215.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:55.372Z,1509050215.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:55.740Z,1509050215.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:56.150Z,1509050216.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:56.555Z,1509050216.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:56.989Z,1509050216.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:57.350Z,1509050217.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:57.734Z,1509050217.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:58.146Z,1509050218.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:58.539Z,1509050218.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:59.002Z,1509050219.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:59.339Z,1509050219.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:36:59.735Z,1509050219.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:00.132Z,1509050220.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:00.488Z,1509050220.488 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:37:00.551Z,1509050220.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:01.003Z,1509050221.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:01.374Z,1509050221.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:01.784Z,1509050221.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:02.155Z,1509050222.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:02.532Z,1509050222.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:03.058Z,1509050223.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:03.363Z,1509050223.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:03.736Z,1509050223.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:04.200Z,1509050224.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:04.545Z,1509050224.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:05.001Z,1509050225.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:05.358Z,1509050225.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:05.737Z,1509050225.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:06.133Z,1509050226.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:06.539Z,1509050226.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:07.010Z,1509050227.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:07.365Z,1509050227.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:07.732Z,1509050227.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:08.131Z,1509050228.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:08.557Z,1509050228.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:09.021Z,1509050229.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:09.337Z,1509050229.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:09.750Z,1509050229.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:10.130Z,1509050230.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:10.543Z,1509050230.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:10.939Z,1509050230.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:11.347Z,1509050231.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:11.744Z,1509050231.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:12.189Z,1509050232.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:12.553Z,1509050232.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:12.935Z,1509050232.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:13.348Z,1509050233.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:13.740Z,1509050233.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:14.138Z,1509050234.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:14.551Z,1509050234.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:14.949Z,1509050234.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:15.330Z,1509050235.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:15.737Z,1509050235.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:16.201Z,1509050236.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:16.541Z,1509050236.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:17.032Z,1509050237.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:17.398Z,1509050237.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:17.743Z,1509050237.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:18.131Z,1509050238.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:18.593Z,1509050238.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:18.939Z,1509050238.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:19.398Z,1509050239.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:19.760Z,1509050239.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:20.129Z,1509050240.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:20.534Z,1509050240.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:21.036Z,1509050241.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:21.339Z,1509050241.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:21.744Z,1509050241.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:22.206Z,1509050242.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:22.550Z,1509050242.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:22.936Z,1509050242.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:23.336Z,1509050243.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:23.750Z,1509050243.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:24.137Z,1509050244.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:24.540Z,1509050244.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:24.921Z,1509050244.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:25.337Z,1509050245.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:25.748Z,1509050245.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:26.142Z,1509050246.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:26.562Z,1509050246.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:26.948Z,1509050246.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:27.336Z,1509050247.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:27.743Z,1509050247.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:28.176Z,1509050248.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:28.546Z,1509050248.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:28.936Z,1509050248.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:29.340Z,1509050249.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:29.744Z,1509050249.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:30.142Z,1509050250.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:30.539Z,1509050250.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:31.035Z,1509050251.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:31.354Z,1509050251.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:31.751Z,1509050251.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:32.219Z,1509050252.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:32.534Z,1509050252.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:32.981Z,1509050252.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:33.360Z,1509050253.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:33.766Z,1509050253.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:34.192Z,1509050254.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:34.541Z,1509050254.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:34.947Z,1509050254.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:35.396Z,1509050255.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:35.736Z,1509050255.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:36.139Z,1509050256.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:36.536Z,1509050256.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:36.950Z,1509050256.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:37.340Z,1509050257.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:37.767Z,1509050257.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:38.132Z,1509050258.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:38.541Z,1509050258.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:38.935Z,1509050258.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:39.343Z,1509050259.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:39.757Z,1509050259.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:40.149Z,1509050260.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:40.551Z,1509050260.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:40.925Z,1509050260.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:41.341Z,1509050261.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:41.734Z,1509050261.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:42.143Z,1509050262.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:42.539Z,1509050262.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:43.003Z,1509050263.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:43.337Z,1509050263.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:43.742Z,1509050263.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:44.162Z,1509050264.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:44.537Z,1509050264.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:44.948Z,1509050264.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:45.386Z,1509050265.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:45.755Z,1509050265.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:46.147Z,1509050266.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:46.592Z,1509050266.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:47.019Z,1509050267.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:47.373Z,1509050267.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:47.775Z,1509050267.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:48.142Z,1509050268.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:48.587Z,1509050268.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:49.038Z,1509050269.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:49.337Z,1509050269.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:49.739Z,1509050269.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:50.147Z,1509050270.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:50.534Z,1509050270.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:50.937Z,1509050270.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:51.350Z,1509050271.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:51.739Z,1509050271.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:52.146Z,1509050272.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:52.531Z,1509050272.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:52.934Z,1509050272.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:53.343Z,1509050273.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:53.745Z,1509050273.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:54.146Z,1509050274.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:54.542Z,1509050274.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:55.204Z,1509050275.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:55.511Z,1509050275.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:55.915Z,1509050275.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:56.336Z,1509050276.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:56.702Z,1509050276.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:57.189Z,1509050277.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:57.509Z,1509050277.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:57.908Z,1509050277.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:58.324Z,1509050278.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:58.716Z,1509050278.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:59.110Z,1509050279.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:59.523Z,1509050279.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:37:59.938Z,1509050279.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:00.301Z,1509050280.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:00.654Z,1509050280.654 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:38:00.710Z,1509050280.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:01.142Z,1509050281.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:01.526Z,1509050281.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:01.922Z,1509050281.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:02.302Z,1509050282.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:02.756Z,1509050282.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:03.112Z,1509050283.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:03.532Z,1509050283.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:03.901Z,1509050283.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:04.301Z,1509050284.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:04.705Z,1509050284.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:05.101Z,1509050285.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:05.520Z,1509050285.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:05.911Z,1509050285.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:06.430Z,1509050286.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:06.798Z,1509050286.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:07.222Z,1509050287.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:07.603Z,1509050287.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:08.003Z,1509050288.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:08.402Z,1509050288.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:08.789Z,1509050288.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:09.220Z,1509050289.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:09.598Z,1509050289.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:09.991Z,1509050289.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:10.399Z,1509050290.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:10.793Z,1509050290.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:11.240Z,1509050291.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:11.604Z,1509050291.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:12.006Z,1509050292.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:12.404Z,1509050292.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:12.813Z,1509050292.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:13.214Z,1509050293.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:13.617Z,1509050293.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:14.044Z,1509050294.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:14.397Z,1509050294.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:14.794Z,1509050294.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:15.244Z,1509050295.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:15.642Z,1509050295.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:15.996Z,1509050295.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:16.398Z,1509050296.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:16.828Z,1509050296.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:17.206Z,1509050297.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:17.686Z,1509050297.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:18.011Z,1509050298.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:18.409Z,1509050298.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:18.786Z,1509050298.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:19.217Z,1509050299.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:19.614Z,1509050299.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:19.993Z,1509050299.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:20.396Z,1509050300.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:20.807Z,1509050300.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:21.211Z,1509050301.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:21.593Z,1509050301.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:21.993Z,1509050301.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:22.402Z,1509050302.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:22.814Z,1509050302.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:23.213Z,1509050303.213 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:23.214Z,1509050303.214 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 17
2017-10-26T20:38:23.214Z,1509050303.214 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:38:23.218Z,1509050303.218 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:23.218Z,1509050303.218 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 17
2017-10-26T20:38:23.218Z,1509050303.218 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:38:23.306Z,1509050303.306 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:38:23.306Z,1509050303.306 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:38:23.707Z,1509050303.707 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:38:23.707Z,1509050303.707 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 17
2017-10-26T20:38:23.708Z,1509050303.708 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:38:23.708Z,1509050303.708 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 17
2017-10-26T20:38:23.991Z,1509050303.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:38:23.992Z,1509050303.992 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:38:23.992Z,1509050303.992 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:38:23.995Z,1509050303.995 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:38:23.995Z,1509050303.995 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:38:23.996Z,1509050303.996 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:38:24.394Z,1509050304.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:24.801Z,1509050304.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:25.241Z,1509050305.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:25.606Z,1509050305.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:26.011Z,1509050306.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:26.397Z,1509050306.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:26.797Z,1509050306.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:27.232Z,1509050307.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:27.593Z,1509050307.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:28.002Z,1509050308.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:28.435Z,1509050308.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:28.797Z,1509050308.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:29.203Z,1509050309.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:29.606Z,1509050309.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:29.995Z,1509050309.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:30.430Z,1509050310.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:30.789Z,1509050310.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:31.248Z,1509050311.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:31.596Z,1509050311.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:32.049Z,1509050312.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:32.436Z,1509050312.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:32.804Z,1509050312.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:33.220Z,1509050313.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:33.613Z,1509050313.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:34.007Z,1509050314.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:34.400Z,1509050314.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:34.792Z,1509050314.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:35.214Z,1509050315.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:35.599Z,1509050315.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:36.003Z,1509050316.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:36.402Z,1509050316.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:36.799Z,1509050316.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:37.231Z,1509050317.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:37.608Z,1509050317.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:37.996Z,1509050317.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:38.406Z,1509050318.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:38.808Z,1509050318.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:39.219Z,1509050319.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:39.617Z,1509050319.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:39.989Z,1509050319.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:40.398Z,1509050320.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:40.791Z,1509050320.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:41.231Z,1509050321.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:41.597Z,1509050321.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:41.989Z,1509050321.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:42.406Z,1509050322.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:42.793Z,1509050322.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:43.242Z,1509050323.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:43.639Z,1509050323.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:43.993Z,1509050323.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:44.408Z,1509050324.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:44.841Z,1509050324.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:45.241Z,1509050325.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:45.602Z,1509050325.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:46.030Z,1509050326.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:46.390Z,1509050326.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:46.824Z,1509050326.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:47.274Z,1509050327.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:47.591Z,1509050327.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:47.990Z,1509050327.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:48.394Z,1509050328.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:48.792Z,1509050328.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:49.212Z,1509050329.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:49.599Z,1509050329.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:50.011Z,1509050330.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:50.406Z,1509050330.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:50.806Z,1509050330.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:51.224Z,1509050331.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:51.600Z,1509050331.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:51.996Z,1509050331.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:52.396Z,1509050332.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:52.794Z,1509050332.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:53.241Z,1509050333.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:53.612Z,1509050333.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:54.006Z,1509050334.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:54.393Z,1509050334.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:54.788Z,1509050334.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:55.218Z,1509050335.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:55.594Z,1509050335.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:55.997Z,1509050335.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:56.405Z,1509050336.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:56.835Z,1509050336.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:57.208Z,1509050337.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:57.599Z,1509050337.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:58.025Z,1509050338.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:58.411Z,1509050338.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:58.802Z,1509050338.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:59.206Z,1509050339.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:38:59.628Z,1509050339.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:00.011Z,1509050340.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:00.424Z,1509050340.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:00.751Z,1509050340.751 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:39:00.801Z,1509050340.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:01.231Z,1509050341.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:01.631Z,1509050341.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:01.997Z,1509050341.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:02.423Z,1509050342.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:02.799Z,1509050342.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:03.203Z,1509050343.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:03.614Z,1509050343.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:03.984Z,1509050343.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:04.389Z,1509050344.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:04.802Z,1509050344.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:05.220Z,1509050345.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:05.593Z,1509050345.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:05.994Z,1509050345.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:06.390Z,1509050346.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:06.797Z,1509050346.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:07.224Z,1509050347.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:07.603Z,1509050347.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:07.993Z,1509050347.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:08.395Z,1509050348.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:08.800Z,1509050348.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:09.221Z,1509050349.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:09.613Z,1509050349.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:10.003Z,1509050350.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:10.403Z,1509050350.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:10.803Z,1509050350.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:11.227Z,1509050351.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:11.621Z,1509050351.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:11.993Z,1509050351.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:12.392Z,1509050352.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:12.807Z,1509050352.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:13.211Z,1509050353.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:13.612Z,1509050353.612 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T20:39:13.612Z,1509050353.612 [BPC1] Data Fault, FailCount= 1
2017-10-26T20:39:13.612Z,1509050353.612 [BPC1](ERROR): Data Fault
2017-10-26T20:39:13.657Z,1509050353.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:13.720Z,1509050353.720 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T20:39:13.998Z,1509050353.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:14.401Z,1509050354.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:14.815Z,1509050354.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:14.947Z,1509050354.947 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:39:14.947Z,1509050354.947 [BPC1] No Fault, FailCount= 1
2017-10-26T20:39:15.272Z,1509050355.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:15.590Z,1509050355.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:16.003Z,1509050356.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:16.430Z,1509050356.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:16.805Z,1509050356.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:17.207Z,1509050357.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:17.599Z,1509050357.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:17.991Z,1509050357.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:18.404Z,1509050358.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:18.808Z,1509050358.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:19.208Z,1509050359.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:19.606Z,1509050359.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:20.002Z,1509050360.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:20.407Z,1509050360.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:20.815Z,1509050360.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:21.213Z,1509050361.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:21.610Z,1509050361.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:21.998Z,1509050361.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:22.395Z,1509050362.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:22.801Z,1509050362.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:23.234Z,1509050363.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:23.604Z,1509050363.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:23.999Z,1509050363.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:24.398Z,1509050364.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:24.801Z,1509050364.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:25.271Z,1509050365.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:25.668Z,1509050365.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:26.087Z,1509050366.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:26.473Z,1509050366.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:26.872Z,1509050366.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:27.278Z,1509050367.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:27.695Z,1509050367.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:28.105Z,1509050368.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:28.470Z,1509050368.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:28.867Z,1509050368.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:29.302Z,1509050369.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:29.670Z,1509050369.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:30.106Z,1509050370.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:30.503Z,1509050370.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:30.869Z,1509050370.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:31.278Z,1509050371.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:31.661Z,1509050371.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:32.088Z,1509050372.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:32.467Z,1509050372.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:32.871Z,1509050372.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:33.272Z,1509050373.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:33.672Z,1509050373.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:34.080Z,1509050374.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:34.476Z,1509050374.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:34.882Z,1509050374.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:35.271Z,1509050375.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:35.669Z,1509050375.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:36.072Z,1509050376.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:36.469Z,1509050376.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:36.869Z,1509050376.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:37.282Z,1509050377.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:37.684Z,1509050377.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:38.084Z,1509050378.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:38.487Z,1509050378.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:38.866Z,1509050378.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:39.271Z,1509050379.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:39.666Z,1509050379.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:40.063Z,1509050380.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:40.475Z,1509050380.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:40.870Z,1509050380.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:41.281Z,1509050381.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:41.682Z,1509050381.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:42.065Z,1509050382.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:42.518Z,1509050382.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:42.865Z,1509050382.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:43.307Z,1509050383.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:43.676Z,1509050383.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:44.123Z,1509050384.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:44.473Z,1509050384.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:44.902Z,1509050384.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:45.296Z,1509050385.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:45.666Z,1509050385.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:46.066Z,1509050386.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:46.474Z,1509050386.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:46.872Z,1509050386.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:47.276Z,1509050387.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:47.673Z,1509050387.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:48.077Z,1509050388.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:48.475Z,1509050388.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:48.880Z,1509050388.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:49.353Z,1509050389.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:49.676Z,1509050389.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:50.059Z,1509050390.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:50.487Z,1509050390.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:50.886Z,1509050390.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:51.272Z,1509050391.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:51.732Z,1509050391.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:52.078Z,1509050392.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:52.482Z,1509050392.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:52.874Z,1509050392.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:53.274Z,1509050393.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:53.735Z,1509050393.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:54.076Z,1509050394.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:54.475Z,1509050394.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:54.880Z,1509050394.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:55.266Z,1509050395.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:55.675Z,1509050395.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:56.071Z,1509050396.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:56.551Z,1509050396.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:56.872Z,1509050396.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:57.280Z,1509050397.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:57.722Z,1509050397.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:58.079Z,1509050398.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:58.496Z,1509050398.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:58.903Z,1509050398.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:59.272Z,1509050399.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:39:59.671Z,1509050399.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:00.084Z,1509050400.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:00.495Z,1509050400.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:00.883Z,1509050400.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:01.237Z,1509050401.237 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:40:01.291Z,1509050401.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:01.672Z,1509050401.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:02.069Z,1509050402.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:02.486Z,1509050402.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:02.863Z,1509050402.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:03.348Z,1509050403.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:03.667Z,1509050403.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:04.069Z,1509050404.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:04.472Z,1509050404.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:04.881Z,1509050404.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:05.272Z,1509050405.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:05.722Z,1509050405.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:06.063Z,1509050406.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:06.464Z,1509050406.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:06.877Z,1509050406.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:07.269Z,1509050407.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:07.774Z,1509050407.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:08.076Z,1509050408.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:08.474Z,1509050408.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:08.873Z,1509050408.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:09.268Z,1509050409.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:09.702Z,1509050409.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:10.101Z,1509050410.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:10.471Z,1509050410.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:10.987Z,1509050410.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:11.276Z,1509050411.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:11.665Z,1509050411.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:12.109Z,1509050412.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:12.472Z,1509050412.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:12.916Z,1509050412.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:13.302Z,1509050413.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:13.690Z,1509050413.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:14.069Z,1509050414.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:14.462Z,1509050414.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:14.874Z,1509050414.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:15.276Z,1509050415.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:15.684Z,1509050415.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:16.078Z,1509050416.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:16.483Z,1509050416.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:16.879Z,1509050416.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:17.349Z,1509050417.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:17.666Z,1509050417.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:18.083Z,1509050418.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:18.471Z,1509050418.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:18.885Z,1509050418.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:19.274Z,1509050419.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:19.718Z,1509050419.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:20.070Z,1509050420.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:20.474Z,1509050420.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:20.883Z,1509050420.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:21.274Z,1509050421.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:21.725Z,1509050421.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:22.070Z,1509050422.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:22.485Z,1509050422.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:22.888Z,1509050422.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:23.284Z,1509050423.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:23.679Z,1509050423.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:24.072Z,1509050424.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:24.466Z,1509050424.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:24.872Z,1509050424.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:25.321Z,1509050425.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:25.701Z,1509050425.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:26.090Z,1509050426.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:26.490Z,1509050426.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:26.868Z,1509050426.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:27.284Z,1509050427.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:27.714Z,1509050427.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:28.092Z,1509050428.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:28.478Z,1509050428.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:28.873Z,1509050428.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:29.284Z,1509050429.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:29.675Z,1509050429.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:30.089Z,1509050430.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:30.480Z,1509050430.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:30.868Z,1509050430.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:31.353Z,1509050431.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:31.670Z,1509050431.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:32.076Z,1509050432.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:32.472Z,1509050432.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:32.887Z,1509050432.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:33.278Z,1509050433.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:33.823Z,1509050433.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:34.259Z,1509050434.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:34.625Z,1509050434.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:35.015Z,1509050435.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:35.418Z,1509050435.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:35.814Z,1509050435.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:36.244Z,1509050436.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:36.615Z,1509050436.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:37.112Z,1509050437.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:37.430Z,1509050437.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:37.836Z,1509050437.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:38.270Z,1509050438.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:38.607Z,1509050438.607 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T20:40:38.607Z,1509050438.607 [BPC1] Data Fault, FailCount= 1
2017-10-26T20:40:38.607Z,1509050438.607 [BPC1](ERROR): Data Fault
2017-10-26T20:40:38.616Z,1509050438.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:38.694Z,1509050438.694 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T20:40:39.061Z,1509050439.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:39.441Z,1509050439.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:39.817Z,1509050439.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:39.878Z,1509050439.878 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:40:39.878Z,1509050439.878 [BPC1] No Fault, FailCount= 1
2017-10-26T20:40:40.308Z,1509050440.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:40.656Z,1509050440.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:41.061Z,1509050441.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:41.431Z,1509050441.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:41.812Z,1509050441.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:42.235Z,1509050442.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:42.622Z,1509050442.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:43.097Z,1509050443.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:43.444Z,1509050443.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:43.813Z,1509050443.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:44.234Z,1509050444.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:44.618Z,1509050444.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:45.079Z,1509050445.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:45.422Z,1509050445.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:45.827Z,1509050445.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:46.231Z,1509050446.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:46.638Z,1509050446.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:47.059Z,1509050447.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:47.419Z,1509050447.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:47.815Z,1509050447.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:48.228Z,1509050448.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:48.630Z,1509050448.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:49.078Z,1509050449.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:49.468Z,1509050449.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:49.828Z,1509050449.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:50.240Z,1509050450.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:50.645Z,1509050450.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:51.044Z,1509050451.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:51.449Z,1509050451.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:51.838Z,1509050451.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:52.229Z,1509050452.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:52.623Z,1509050452.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:53.123Z,1509050453.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:53.447Z,1509050453.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:53.817Z,1509050453.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:54.231Z,1509050454.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:54.623Z,1509050454.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:55.052Z,1509050455.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:55.445Z,1509050455.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:55.810Z,1509050455.810 [BPC1](ERROR): Failed to receive battery data
2017-10-26T20:40:55.810Z,1509050455.810 [BPC1] Communications Fault, FailCount= 2
2017-10-26T20:40:55.810Z,1509050455.810 [BPC1](ERROR): Communications Fault
2017-10-26T20:40:55.824Z,1509050455.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:55.911Z,1509050455.911 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T20:40:56.230Z,1509050456.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:56.634Z,1509050456.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:57.065Z,1509050457.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:57.154Z,1509050457.154 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:40:57.154Z,1509050457.154 [BPC1] No Fault, FailCount= 2
2017-10-26T20:40:57.541Z,1509050457.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:57.806Z,1509050457.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:58.236Z,1509050458.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:58.636Z,1509050458.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:59.066Z,1509050459.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:59.443Z,1509050459.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:40:59.828Z,1509050459.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:00.226Z,1509050460.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:00.623Z,1509050460.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:00.978Z,1509050460.978 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:41:01.040Z,1509050461.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:01.427Z,1509050461.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:01.853Z,1509050461.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:02.234Z,1509050462.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:02.641Z,1509050462.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:03.081Z,1509050463.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:03.428Z,1509050463.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:03.820Z,1509050463.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:04.233Z,1509050464.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:04.633Z,1509050464.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:05.059Z,1509050465.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:05.422Z,1509050465.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:05.806Z,1509050465.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:06.240Z,1509050466.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:06.617Z,1509050466.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:07.085Z,1509050467.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:07.421Z,1509050467.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:07.817Z,1509050467.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:08.233Z,1509050468.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:08.612Z,1509050468.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:09.118Z,1509050469.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:09.427Z,1509050469.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:09.836Z,1509050469.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:10.236Z,1509050470.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:10.639Z,1509050470.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:11.072Z,1509050471.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:11.430Z,1509050471.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:11.830Z,1509050471.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:12.231Z,1509050472.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:12.649Z,1509050472.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:13.060Z,1509050473.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:13.426Z,1509050473.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:13.825Z,1509050473.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:14.267Z,1509050474.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:14.616Z,1509050474.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:15.080Z,1509050475.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:15.423Z,1509050475.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:15.862Z,1509050475.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:16.237Z,1509050476.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:16.635Z,1509050476.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:17.125Z,1509050477.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:17.530Z,1509050477.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:17.947Z,1509050477.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:18.332Z,1509050478.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:18.735Z,1509050478.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:19.120Z,1509050479.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:19.546Z,1509050479.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:19.938Z,1509050479.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:20.329Z,1509050480.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:20.730Z,1509050480.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:21.141Z,1509050481.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:21.536Z,1509050481.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:21.935Z,1509050481.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:22.364Z,1509050482.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:22.748Z,1509050482.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:23.126Z,1509050483.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:23.525Z,1509050483.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:23.931Z,1509050483.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:24.328Z,1509050484.328 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:24.328Z,1509050484.328 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 18
2017-10-26T20:41:24.329Z,1509050484.329 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:41:24.333Z,1509050484.333 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:24.333Z,1509050484.333 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 18
2017-10-26T20:41:24.333Z,1509050484.333 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:41:24.367Z,1509050484.367 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:41:24.368Z,1509050484.368 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:41:24.831Z,1509050484.831 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:41:24.831Z,1509050484.831 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 18
2017-10-26T20:41:24.832Z,1509050484.832 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:41:24.832Z,1509050484.832 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 18
2017-10-26T20:41:25.133Z,1509050485.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:41:25.133Z,1509050485.133 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:41:25.133Z,1509050485.133 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:41:25.136Z,1509050485.136 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:41:25.136Z,1509050485.136 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:41:25.137Z,1509050485.137 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:41:25.536Z,1509050485.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:25.938Z,1509050485.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:26.403Z,1509050486.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:26.745Z,1509050486.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:27.137Z,1509050487.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:27.543Z,1509050487.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:28.006Z,1509050488.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:28.335Z,1509050488.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:28.751Z,1509050488.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:29.147Z,1509050489.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:29.556Z,1509050489.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:29.961Z,1509050489.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:30.336Z,1509050490.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:30.725Z,1509050490.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:31.134Z,1509050491.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:31.541Z,1509050491.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:31.936Z,1509050491.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:32.316Z,1509050492.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:32.720Z,1509050492.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:33.120Z,1509050493.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:33.528Z,1509050493.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:33.930Z,1509050493.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:34.329Z,1509050494.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:34.728Z,1509050494.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:35.109Z,1509050495.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:35.522Z,1509050495.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:35.921Z,1509050495.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:36.326Z,1509050496.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:36.726Z,1509050496.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:37.124Z,1509050497.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:37.530Z,1509050497.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:37.929Z,1509050497.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:38.336Z,1509050498.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:38.729Z,1509050498.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:39.187Z,1509050499.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:39.553Z,1509050499.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:39.927Z,1509050499.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:40.377Z,1509050500.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:40.731Z,1509050500.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:41.141Z,1509050501.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:41.528Z,1509050501.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:41.931Z,1509050501.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:42.380Z,1509050502.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:42.738Z,1509050502.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:43.196Z,1509050503.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:43.550Z,1509050503.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:43.967Z,1509050503.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:44.383Z,1509050504.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:44.784Z,1509050504.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:45.124Z,1509050505.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:45.535Z,1509050505.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:45.940Z,1509050505.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:46.337Z,1509050506.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:46.736Z,1509050506.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:47.135Z,1509050507.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:47.532Z,1509050507.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:47.922Z,1509050507.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:48.331Z,1509050508.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:48.734Z,1509050508.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:49.194Z,1509050509.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:49.532Z,1509050509.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:49.922Z,1509050509.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:50.326Z,1509050510.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:50.722Z,1509050510.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:51.124Z,1509050511.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:51.552Z,1509050511.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:51.932Z,1509050511.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:52.330Z,1509050512.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:52.733Z,1509050512.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:53.124Z,1509050513.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:53.543Z,1509050513.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:53.928Z,1509050513.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:54.327Z,1509050514.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:54.752Z,1509050514.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:55.122Z,1509050515.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:55.546Z,1509050515.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:55.955Z,1509050515.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:56.389Z,1509050516.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:56.733Z,1509050516.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:57.129Z,1509050517.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:57.578Z,1509050517.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:57.928Z,1509050517.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:58.371Z,1509050518.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:58.768Z,1509050518.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:59.132Z,1509050519.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:59.558Z,1509050519.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:41:59.920Z,1509050519.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:00.338Z,1509050520.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:00.742Z,1509050520.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:01.192Z,1509050521.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:01.471Z,1509050521.471 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:42:01.534Z,1509050521.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:01.923Z,1509050521.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:02.332Z,1509050522.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:02.737Z,1509050522.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:03.132Z,1509050523.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:03.537Z,1509050523.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:03.944Z,1509050523.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:04.342Z,1509050524.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:04.745Z,1509050524.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:05.145Z,1509050525.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:05.564Z,1509050525.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:05.926Z,1509050525.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:06.332Z,1509050526.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:06.734Z,1509050526.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:07.128Z,1509050527.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:07.537Z,1509050527.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:07.936Z,1509050527.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:08.314Z,1509050528.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:08.720Z,1509050528.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:09.130Z,1509050529.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:09.582Z,1509050529.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:09.926Z,1509050529.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:10.325Z,1509050530.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:10.780Z,1509050530.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:11.132Z,1509050531.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:11.566Z,1509050531.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:11.933Z,1509050531.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:12.421Z,1509050532.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:12.770Z,1509050532.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:13.131Z,1509050533.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:13.532Z,1509050533.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:13.949Z,1509050533.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:14.322Z,1509050534.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:14.720Z,1509050534.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:15.129Z,1509050535.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:15.533Z,1509050535.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:15.987Z,1509050535.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:16.339Z,1509050536.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:16.736Z,1509050536.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:17.126Z,1509050537.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:17.554Z,1509050537.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:17.941Z,1509050537.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:18.321Z,1509050538.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:18.738Z,1509050538.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:19.140Z,1509050539.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:19.532Z,1509050539.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:19.929Z,1509050539.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:20.327Z,1509050540.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:20.726Z,1509050540.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:21.130Z,1509050541.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:21.532Z,1509050541.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:21.941Z,1509050541.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:22.344Z,1509050542.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:22.749Z,1509050542.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:23.144Z,1509050543.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:23.579Z,1509050543.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:23.927Z,1509050543.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:24.329Z,1509050544.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:24.729Z,1509050544.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:25.184Z,1509050545.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:25.534Z,1509050545.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:25.923Z,1509050545.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:26.356Z,1509050546.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:26.726Z,1509050546.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:27.197Z,1509050547.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:27.562Z,1509050547.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:27.930Z,1509050547.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:28.332Z,1509050548.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:28.766Z,1509050548.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:29.160Z,1509050549.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:29.530Z,1509050549.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:29.936Z,1509050549.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:30.327Z,1509050550.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:30.725Z,1509050550.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:31.123Z,1509050551.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:31.529Z,1509050551.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:31.932Z,1509050551.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:32.341Z,1509050552.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:32.770Z,1509050552.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:33.138Z,1509050553.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:33.547Z,1509050553.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:33.937Z,1509050553.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:34.380Z,1509050554.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:34.729Z,1509050554.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:35.125Z,1509050555.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:35.537Z,1509050555.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:35.936Z,1509050555.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:36.340Z,1509050556.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:36.723Z,1509050556.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:37.120Z,1509050557.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:37.526Z,1509050557.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:37.924Z,1509050557.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:38.476Z,1509050558.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:38.848Z,1509050558.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:39.311Z,1509050559.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:39.656Z,1509050559.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:40.086Z,1509050560.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:40.450Z,1509050560.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:40.863Z,1509050560.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:41.331Z,1509050561.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:41.652Z,1509050561.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:42.044Z,1509050562.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:42.449Z,1509050562.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:42.847Z,1509050562.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:43.254Z,1509050563.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:43.714Z,1509050563.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:44.057Z,1509050564.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:44.468Z,1509050564.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:44.859Z,1509050564.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:45.249Z,1509050565.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:45.731Z,1509050565.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:46.042Z,1509050566.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:46.474Z,1509050566.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:46.851Z,1509050566.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:47.253Z,1509050567.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:47.661Z,1509050567.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:48.050Z,1509050568.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:48.461Z,1509050568.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:48.858Z,1509050568.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:49.248Z,1509050569.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:49.647Z,1509050569.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:50.046Z,1509050570.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:50.451Z,1509050570.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:50.855Z,1509050570.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:51.277Z,1509050571.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:51.687Z,1509050571.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:52.048Z,1509050572.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:52.455Z,1509050572.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:52.854Z,1509050572.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:53.244Z,1509050573.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:53.687Z,1509050573.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:54.054Z,1509050574.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:54.460Z,1509050574.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:54.890Z,1509050574.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:55.334Z,1509050575.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:55.689Z,1509050575.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:56.090Z,1509050576.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:56.448Z,1509050576.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:56.850Z,1509050576.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:57.256Z,1509050577.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:57.736Z,1509050577.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:58.079Z,1509050578.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:58.447Z,1509050578.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:58.848Z,1509050578.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:59.251Z,1509050579.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:42:59.746Z,1509050579.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:00.039Z,1509050580.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:00.449Z,1509050580.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:00.844Z,1509050580.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:01.245Z,1509050581.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:01.605Z,1509050581.605 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:43:01.665Z,1509050581.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:02.062Z,1509050582.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:02.464Z,1509050582.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:02.857Z,1509050582.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:03.242Z,1509050583.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:03.665Z,1509050583.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:04.048Z,1509050584.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:04.449Z,1509050584.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:04.876Z,1509050584.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:05.254Z,1509050585.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:05.657Z,1509050585.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:06.051Z,1509050586.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:06.444Z,1509050586.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:06.890Z,1509050586.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:07.260Z,1509050587.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:07.653Z,1509050587.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:08.088Z,1509050588.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:08.462Z,1509050588.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:08.846Z,1509050588.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:09.294Z,1509050589.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:09.647Z,1509050589.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:10.086Z,1509050590.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:10.504Z,1509050590.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:10.868Z,1509050590.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:11.252Z,1509050591.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:11.656Z,1509050591.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:12.049Z,1509050592.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:12.452Z,1509050592.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:12.851Z,1509050592.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:13.259Z,1509050593.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:13.694Z,1509050593.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:14.058Z,1509050594.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:14.439Z,1509050594.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:14.843Z,1509050594.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:15.247Z,1509050595.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:15.645Z,1509050595.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:16.079Z,1509050596.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:16.458Z,1509050596.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:16.843Z,1509050596.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:17.263Z,1509050597.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:17.652Z,1509050597.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:18.073Z,1509050598.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:18.459Z,1509050598.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:18.869Z,1509050598.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:19.244Z,1509050599.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:19.646Z,1509050599.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:20.044Z,1509050600.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:20.449Z,1509050600.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:20.896Z,1509050600.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:21.242Z,1509050601.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:21.637Z,1509050601.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:22.044Z,1509050602.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:22.491Z,1509050602.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:22.000Z,1509050603.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:23.400Z,1509050603.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:23.830Z,1509050603.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:24.226Z,1509050604.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:24.624Z,1509050604.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:24.978Z,1509050604.978 [PNI_TCM](ERROR): CRC does not match. Expected:0x35720 got:0x1346
2017-10-26T20:43:25.041Z,1509050605.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:25.412Z,1509050605.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:25.800Z,1509050605.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:26.219Z,1509050606.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:26.604Z,1509050606.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:27.006Z,1509050607.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:27.406Z,1509050607.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:27.788Z,1509050607.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:28.226Z,1509050608.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:28.597Z,1509050608.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:28.995Z,1509050608.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:29.398Z,1509050609.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:29.811Z,1509050609.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:30.257Z,1509050610.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:30.605Z,1509050610.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:31.046Z,1509050611.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:31.401Z,1509050611.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:31.807Z,1509050611.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:32.218Z,1509050612.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:32.601Z,1509050612.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:33.071Z,1509050613.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:33.425Z,1509050613.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:33.793Z,1509050613.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:34.233Z,1509050614.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:34.604Z,1509050614.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:35.074Z,1509050615.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:35.406Z,1509050615.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:35.793Z,1509050615.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:36.204Z,1509050616.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:36.605Z,1509050616.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:36.997Z,1509050616.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:37.447Z,1509050617.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:37.799Z,1509050617.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:38.236Z,1509050618.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:38.601Z,1509050618.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:39.028Z,1509050619.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:39.461Z,1509050619.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:39.808Z,1509050619.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:40.228Z,1509050620.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:40.607Z,1509050620.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:40.997Z,1509050620.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:41.434Z,1509050621.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:41.787Z,1509050621.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:42.214Z,1509050622.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:42.604Z,1509050622.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:43.006Z,1509050623.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:43.394Z,1509050623.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:43.791Z,1509050623.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:44.215Z,1509050624.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:44.596Z,1509050624.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:45.050Z,1509050625.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:45.417Z,1509050625.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:45.795Z,1509050625.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:46.207Z,1509050626.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:46.610Z,1509050626.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:47.050Z,1509050627.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:47.386Z,1509050627.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:47.810Z,1509050627.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:48.207Z,1509050628.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:48.611Z,1509050628.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:49.066Z,1509050629.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:49.398Z,1509050629.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:49.792Z,1509050629.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:50.206Z,1509050630.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:50.597Z,1509050630.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:51.066Z,1509050631.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:51.448Z,1509050631.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:51.825Z,1509050631.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:52.228Z,1509050632.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:52.603Z,1509050632.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:53.072Z,1509050633.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:53.423Z,1509050633.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:53.784Z,1509050633.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:54.259Z,1509050634.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:54.613Z,1509050634.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:55.059Z,1509050635.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:55.380Z,1509050635.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:55.806Z,1509050635.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:56.210Z,1509050636.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:56.588Z,1509050636.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:57.012Z,1509050637.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:57.405Z,1509050637.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:57.813Z,1509050637.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:58.205Z,1509050638.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:58.580Z,1509050638.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:59.009Z,1509050639.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:59.412Z,1509050639.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:43:59.804Z,1509050639.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:00.214Z,1509050640.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:00.609Z,1509050640.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:00.990Z,1509050640.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:01.396Z,1509050641.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:01.804Z,1509050641.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:02.139Z,1509050642.139 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:44:02.243Z,1509050642.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:02.607Z,1509050642.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:03.001Z,1509050643.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:03.378Z,1509050643.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:03.807Z,1509050643.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:04.238Z,1509050644.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:04.618Z,1509050644.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:05.037Z,1509050645.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:05.394Z,1509050645.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:05.788Z,1509050645.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:06.219Z,1509050646.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:06.648Z,1509050646.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:07.058Z,1509050647.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:07.424Z,1509050647.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:07.811Z,1509050647.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:08.234Z,1509050648.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:08.603Z,1509050648.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:09.092Z,1509050649.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:09.399Z,1509050649.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:09.790Z,1509050649.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:10.215Z,1509050650.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:10.603Z,1509050650.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:10.996Z,1509050650.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:11.396Z,1509050651.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:11.808Z,1509050651.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:12.230Z,1509050652.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:12.590Z,1509050652.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:12.982Z,1509050652.982 [PNI_TCM](ERROR): CRC does not match. Expected:0x60139 got:0x34780
2017-10-26T20:44:13.013Z,1509050653.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:13.414Z,1509050653.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:13.793Z,1509050653.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:14.210Z,1509050654.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:14.595Z,1509050654.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:15.011Z,1509050655.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:15.396Z,1509050655.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:15.790Z,1509050655.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:16.208Z,1509050656.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:16.608Z,1509050656.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:17.005Z,1509050657.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:17.400Z,1509050657.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:17.801Z,1509050657.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:18.220Z,1509050658.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:18.609Z,1509050658.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:19.052Z,1509050659.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:19.396Z,1509050659.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:19.827Z,1509050659.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:20.206Z,1509050660.206 [PNI_TCM](ERROR): CRC does not match. Expected:0x26968 got:0x16806
2017-10-26T20:44:20.230Z,1509050660.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:20.251Z,1509050660.251 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T20:44:20.608Z,1509050660.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:21.079Z,1509050661.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:21.451Z,1509050661.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:21.795Z,1509050661.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:22.230Z,1509050662.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:22.636Z,1509050662.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:23.074Z,1509050663.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:23.427Z,1509050663.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:23.808Z,1509050663.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:24.244Z,1509050664.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:24.609Z,1509050664.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:25.002Z,1509050665.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:25.414Z,1509050665.414 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:25.414Z,1509050665.414 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 19
2017-10-26T20:44:25.414Z,1509050665.414 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:44:25.423Z,1509050665.423 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:25.423Z,1509050665.423 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 19
2017-10-26T20:44:25.423Z,1509050665.423 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:44:25.468Z,1509050665.468 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:44:25.468Z,1509050665.468 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:44:25.813Z,1509050665.813 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:44:25.813Z,1509050665.813 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 19
2017-10-26T20:44:25.814Z,1509050665.814 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:44:25.814Z,1509050665.814 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 19
2017-10-26T20:44:26.218Z,1509050666.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:44:26.219Z,1509050666.219 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:44:26.223Z,1509050666.223 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:44:26.226Z,1509050666.226 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:44:26.231Z,1509050666.231 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:44:26.232Z,1509050666.232 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:44:26.598Z,1509050666.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:26.983Z,1509050666.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:27.405Z,1509050667.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:27.817Z,1509050667.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:28.194Z,1509050668.194 [PNI_TCM](ERROR): CRC does not match. Expected:0x3221 got:0x49625
2017-10-26T20:44:28.226Z,1509050668.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:28.598Z,1509050668.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:28.987Z,1509050668.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:29.415Z,1509050669.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:29.793Z,1509050669.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:30.214Z,1509050670.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:30.593Z,1509050670.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:31.003Z,1509050671.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:31.412Z,1509050671.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:31.801Z,1509050671.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:32.209Z,1509050672.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:32.612Z,1509050672.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:33.049Z,1509050673.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:33.394Z,1509050673.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:33.790Z,1509050673.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:34.208Z,1509050674.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:34.602Z,1509050674.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:35.065Z,1509050675.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:35.418Z,1509050675.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:35.809Z,1509050675.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:36.274Z,1509050676.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:36.596Z,1509050676.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:37.091Z,1509050677.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:37.421Z,1509050677.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:37.899Z,1509050677.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:38.258Z,1509050678.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:38.596Z,1509050678.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:39.007Z,1509050679.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:39.432Z,1509050679.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:39.791Z,1509050679.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:40.218Z,1509050680.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:40.594Z,1509050680.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:40.969Z,1509050680.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:41.398Z,1509050681.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:41.798Z,1509050681.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:42.217Z,1509050682.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:42.598Z,1509050682.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:43.002Z,1509050683.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:43.394Z,1509050683.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:43.804Z,1509050683.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:44.204Z,1509050684.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:44.611Z,1509050684.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:44.982Z,1509050684.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:45.406Z,1509050685.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:45.803Z,1509050685.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:46.212Z,1509050686.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:46.631Z,1509050686.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:47.085Z,1509050687.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:47.410Z,1509050687.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:47.967Z,1509050687.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:48.365Z,1509050688.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:48.773Z,1509050688.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:49.203Z,1509050689.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:49.565Z,1509050689.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:49.963Z,1509050689.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:50.371Z,1509050690.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:50.828Z,1509050690.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:51.203Z,1509050691.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:51.593Z,1509050691.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:51.978Z,1509050691.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:52.399Z,1509050692.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:52.812Z,1509050692.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:53.187Z,1509050693.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:53.556Z,1509050693.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:53.968Z,1509050693.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:54.366Z,1509050694.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:54.780Z,1509050694.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:55.187Z,1509050695.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:55.567Z,1509050695.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:56.001Z,1509050696.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:56.401Z,1509050696.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:56.777Z,1509050696.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:57.168Z,1509050697.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:57.587Z,1509050697.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:57.966Z,1509050697.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:58.364Z,1509050698.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:58.782Z,1509050698.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:59.201Z,1509050699.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:59.672Z,1509050699.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:44:59.965Z,1509050699.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:00.365Z,1509050700.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:00.768Z,1509050700.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:01.214Z,1509050701.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:01.573Z,1509050701.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:01.919Z,1509050701.919 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:45:01.975Z,1509050701.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:02.375Z,1509050702.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:02.774Z,1509050702.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:03.208Z,1509050703.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:03.556Z,1509050703.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:03.984Z,1509050703.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:04.381Z,1509050704.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:04.763Z,1509050704.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:05.255Z,1509050705.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:05.567Z,1509050705.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:06.010Z,1509050706.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:06.370Z,1509050706.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:06.801Z,1509050706.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:07.222Z,1509050707.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:07.568Z,1509050707.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:07.970Z,1509050707.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:08.374Z,1509050708.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:08.766Z,1509050708.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:09.191Z,1509050709.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:09.561Z,1509050709.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:09.966Z,1509050709.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:10.366Z,1509050710.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:10.767Z,1509050710.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:11.195Z,1509050711.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:11.566Z,1509050711.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:11.970Z,1509050711.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:12.417Z,1509050712.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:12.779Z,1509050712.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:13.199Z,1509050713.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:13.573Z,1509050713.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:13.965Z,1509050713.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:14.373Z,1509050714.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:14.762Z,1509050714.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:15.200Z,1509050715.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:15.591Z,1509050715.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:15.980Z,1509050715.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:16.417Z,1509050716.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:16.784Z,1509050716.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:17.202Z,1509050717.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:17.592Z,1509050717.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:17.999Z,1509050717.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:18.369Z,1509050718.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:18.759Z,1509050718.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:19.278Z,1509050719.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:19.574Z,1509050719.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:20.008Z,1509050720.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:20.376Z,1509050720.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:20.790Z,1509050720.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:21.234Z,1509050721.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:21.564Z,1509050721.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:21.960Z,1509050721.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:22.381Z,1509050722.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:22.766Z,1509050722.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:23.202Z,1509050723.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:23.577Z,1509050723.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:23.970Z,1509050723.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:24.359Z,1509050724.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:24.768Z,1509050724.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:25.190Z,1509050725.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:25.573Z,1509050725.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:25.966Z,1509050725.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:26.375Z,1509050726.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:26.759Z,1509050726.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:27.202Z,1509050727.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:27.570Z,1509050727.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:27.987Z,1509050727.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:28.377Z,1509050728.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:28.852Z,1509050728.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:29.256Z,1509050729.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:29.655Z,1509050729.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:30.053Z,1509050730.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:30.442Z,1509050730.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:30.848Z,1509050730.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:31.248Z,1509050731.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:31.654Z,1509050731.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:32.057Z,1509050732.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:32.460Z,1509050732.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:32.878Z,1509050732.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:33.286Z,1509050733.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:33.677Z,1509050733.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:34.045Z,1509050734.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:34.483Z,1509050734.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:34.861Z,1509050734.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:35.281Z,1509050735.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:35.702Z,1509050735.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:36.053Z,1509050736.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:36.464Z,1509050736.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:36.840Z,1509050736.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:37.249Z,1509050737.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:37.656Z,1509050737.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:38.061Z,1509050738.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:38.459Z,1509050738.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:38.854Z,1509050738.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:39.275Z,1509050739.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:39.668Z,1509050739.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:40.049Z,1509050740.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:40.472Z,1509050740.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:40.852Z,1509050740.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:41.255Z,1509050741.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:41.654Z,1509050741.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:42.056Z,1509050742.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:42.461Z,1509050742.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:42.862Z,1509050742.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:43.259Z,1509050743.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:43.669Z,1509050743.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:44.067Z,1509050744.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:44.452Z,1509050744.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:44.851Z,1509050744.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:45.286Z,1509050745.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:45.668Z,1509050745.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:46.067Z,1509050746.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:46.458Z,1509050746.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:46.860Z,1509050746.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:47.247Z,1509050747.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:47.689Z,1509050747.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:48.082Z,1509050748.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:48.454Z,1509050748.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:48.901Z,1509050748.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:49.243Z,1509050749.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:49.689Z,1509050749.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:50.088Z,1509050750.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:50.645Z,1509050750.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:51.050Z,1509050751.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:51.456Z,1509050751.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:51.847Z,1509050751.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:52.248Z,1509050752.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:52.645Z,1509050752.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:53.053Z,1509050753.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:53.442Z,1509050753.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:53.848Z,1509050753.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:54.242Z,1509050754.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:54.643Z,1509050754.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:55.051Z,1509050755.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:55.445Z,1509050755.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:55.859Z,1509050755.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:56.246Z,1509050756.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:56.641Z,1509050756.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:57.088Z,1509050757.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:57.456Z,1509050757.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:57.835Z,1509050757.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:58.244Z,1509050758.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:58.642Z,1509050758.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:59.057Z,1509050759.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:59.459Z,1509050759.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:45:59.840Z,1509050759.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:00.238Z,1509050760.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:00.649Z,1509050760.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:01.082Z,1509050761.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:01.460Z,1509050761.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:01.861Z,1509050761.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:02.201Z,1509050762.201 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:46:02.292Z,1509050762.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:02.642Z,1509050762.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:03.132Z,1509050763.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:03.430Z,1509050763.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:03.866Z,1509050763.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:04.268Z,1509050764.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:04.645Z,1509050764.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:05.104Z,1509050765.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:05.457Z,1509050765.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:05.840Z,1509050765.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:06.251Z,1509050766.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:06.645Z,1509050766.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:07.133Z,1509050767.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:07.472Z,1509050767.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:07.839Z,1509050767.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:08.245Z,1509050768.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:08.663Z,1509050768.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:09.103Z,1509050769.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:09.456Z,1509050769.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:09.840Z,1509050769.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:10.242Z,1509050770.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:10.642Z,1509050770.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:11.038Z,1509050771.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:11.449Z,1509050771.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:11.846Z,1509050771.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:12.259Z,1509050772.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:12.647Z,1509050772.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:13.034Z,1509050773.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:13.451Z,1509050773.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:13.843Z,1509050773.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:14.273Z,1509050774.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:14.655Z,1509050774.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:15.057Z,1509050775.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:15.453Z,1509050775.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:15.862Z,1509050775.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:16.297Z,1509050776.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:16.644Z,1509050776.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:17.087Z,1509050777.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:17.451Z,1509050777.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:18.059Z,1509050778.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:18.455Z,1509050778.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:18.845Z,1509050778.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:19.238Z,1509050779.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:19.628Z,1509050779.628 [BPC1](ERROR): Failed to receive battery data
2017-10-26T20:46:19.628Z,1509050779.628 [BPC1] Communications Fault, FailCount= 1
2017-10-26T20:46:19.628Z,1509050779.628 [BPC1](ERROR): Communications Fault
2017-10-26T20:46:19.637Z,1509050779.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:19.846Z,1509050779.846 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T20:46:20.034Z,1509050780.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:20.438Z,1509050780.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:20.838Z,1509050780.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:20.939Z,1509050780.939 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:46:20.939Z,1509050780.939 [BPC1] No Fault, FailCount= 1
2017-10-26T20:46:21.307Z,1509050781.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:21.638Z,1509050781.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:22.030Z,1509050782.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:22.429Z,1509050782.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:22.855Z,1509050782.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:23.265Z,1509050783.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:23.647Z,1509050783.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:24.028Z,1509050784.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:24.428Z,1509050784.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:24.830Z,1509050784.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:25.229Z,1509050785.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:25.624Z,1509050785.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:26.033Z,1509050786.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:26.436Z,1509050786.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:26.837Z,1509050786.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:27.242Z,1509050787.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:27.642Z,1509050787.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:28.032Z,1509050788.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:28.447Z,1509050788.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:28.824Z,1509050788.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:29.236Z,1509050789.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:29.658Z,1509050789.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:30.044Z,1509050790.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:30.447Z,1509050790.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:30.821Z,1509050790.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:31.226Z,1509050791.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:31.633Z,1509050791.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:32.029Z,1509050792.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:32.435Z,1509050792.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:32.836Z,1509050792.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:33.427Z,1509050793.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:33.828Z,1509050793.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:34.223Z,1509050794.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:34.615Z,1509050794.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:35.098Z,1509050795.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:35.413Z,1509050795.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:35.831Z,1509050795.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:36.248Z,1509050796.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:36.608Z,1509050796.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:37.046Z,1509050797.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:37.410Z,1509050797.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:37.808Z,1509050797.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:38.221Z,1509050798.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:38.612Z,1509050798.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:39.064Z,1509050799.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:39.404Z,1509050799.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:39.811Z,1509050799.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:40.220Z,1509050800.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:40.603Z,1509050800.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:41.073Z,1509050801.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:41.406Z,1509050801.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:41.792Z,1509050801.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:42.217Z,1509050802.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:42.606Z,1509050802.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:43.064Z,1509050803.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:43.403Z,1509050803.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:43.808Z,1509050803.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:44.231Z,1509050804.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:44.599Z,1509050804.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:45.058Z,1509050805.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:45.409Z,1509050805.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:45.814Z,1509050805.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:46.230Z,1509050806.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:46.643Z,1509050806.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:47.067Z,1509050807.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:47.411Z,1509050807.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:47.789Z,1509050807.789 [PNI_TCM](ERROR): CRC does not match. Expected:0x29076 got:0x27107
2017-10-26T20:46:47.826Z,1509050807.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:48.247Z,1509050808.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:48.603Z,1509050808.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:48.999Z,1509050808.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:49.437Z,1509050809.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:49.814Z,1509050809.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:50.234Z,1509050810.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:50.630Z,1509050810.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:51.003Z,1509050811.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:51.420Z,1509050811.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:51.810Z,1509050811.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:52.232Z,1509050812.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:52.623Z,1509050812.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:52.997Z,1509050812.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:53.405Z,1509050813.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:53.815Z,1509050813.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:54.223Z,1509050814.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:54.603Z,1509050814.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:55.009Z,1509050815.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:55.408Z,1509050815.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:55.789Z,1509050815.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:56.236Z,1509050816.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:56.598Z,1509050816.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:57.072Z,1509050817.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:57.419Z,1509050817.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:57.814Z,1509050817.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:58.232Z,1509050818.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:58.595Z,1509050818.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:59.065Z,1509050819.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:59.402Z,1509050819.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:46:59.812Z,1509050819.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:00.217Z,1509050820.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:00.592Z,1509050820.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:01.070Z,1509050821.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:01.413Z,1509050821.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:01.828Z,1509050821.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:02.216Z,1509050822.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:02.539Z,1509050822.539 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:47:02.611Z,1509050822.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:03.135Z,1509050823.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:03.399Z,1509050823.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:03.815Z,1509050823.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:04.240Z,1509050824.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:04.608Z,1509050824.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:05.112Z,1509050825.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:05.433Z,1509050825.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:05.812Z,1509050825.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:06.223Z,1509050826.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:06.595Z,1509050826.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:07.046Z,1509050827.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:07.412Z,1509050827.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:07.812Z,1509050827.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:08.227Z,1509050828.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:08.612Z,1509050828.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:09.038Z,1509050829.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:09.409Z,1509050829.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:09.800Z,1509050829.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:10.220Z,1509050830.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:10.616Z,1509050830.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:11.038Z,1509050831.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:11.397Z,1509050831.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:11.809Z,1509050831.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:12.243Z,1509050832.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:12.609Z,1509050832.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:13.065Z,1509050833.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:13.412Z,1509050833.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:13.806Z,1509050833.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:14.252Z,1509050834.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:14.615Z,1509050834.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:15.041Z,1509050835.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:15.394Z,1509050835.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:15.806Z,1509050835.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:16.265Z,1509050836.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:16.608Z,1509050836.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:17.043Z,1509050837.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:17.426Z,1509050837.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:17.825Z,1509050837.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:18.211Z,1509050838.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:18.626Z,1509050838.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:19.036Z,1509050839.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:19.437Z,1509050839.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:19.843Z,1509050839.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:20.204Z,1509050840.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:20.605Z,1509050840.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:21.036Z,1509050841.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:21.415Z,1509050841.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:21.798Z,1509050841.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:22.210Z,1509050842.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:22.600Z,1509050842.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:23.081Z,1509050843.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:23.421Z,1509050843.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:23.811Z,1509050843.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:24.235Z,1509050844.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:24.612Z,1509050844.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:25.055Z,1509050845.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:25.420Z,1509050845.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:25.801Z,1509050845.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:26.201Z,1509050846.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:26.605Z,1509050846.605 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:26.605Z,1509050846.605 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 20
2017-10-26T20:47:26.606Z,1509050846.606 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:47:26.610Z,1509050846.610 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:26.610Z,1509050846.610 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 20
2017-10-26T20:47:26.610Z,1509050846.610 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:47:26.640Z,1509050846.640 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:47:26.641Z,1509050846.641 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:47:27.170Z,1509050847.170 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:47:27.170Z,1509050847.170 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 20
2017-10-26T20:47:27.170Z,1509050847.170 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:47:27.171Z,1509050847.171 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 20
2017-10-26T20:47:27.401Z,1509050847.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:47:27.401Z,1509050847.401 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:47:27.401Z,1509050847.401 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:47:27.404Z,1509050847.404 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:47:27.405Z,1509050847.405 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:47:27.405Z,1509050847.405 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:47:27.807Z,1509050847.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:28.218Z,1509050848.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:28.626Z,1509050848.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:29.066Z,1509050849.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:29.394Z,1509050849.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:29.817Z,1509050849.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:30.217Z,1509050850.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:30.637Z,1509050850.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:31.062Z,1509050851.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:31.419Z,1509050851.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:31.818Z,1509050851.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:32.209Z,1509050852.209 [PNI_TCM](ERROR): CRC does not match. Expected:0x2439 got:0x48664
2017-10-26T20:47:32.282Z,1509050852.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:32.616Z,1509050852.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:33.089Z,1509050853.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:33.417Z,1509050853.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:33.825Z,1509050853.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:34.264Z,1509050854.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:34.619Z,1509050854.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:35.063Z,1509050855.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:35.408Z,1509050855.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:35.804Z,1509050855.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:36.214Z,1509050856.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:36.622Z,1509050856.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:37.061Z,1509050857.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:37.407Z,1509050857.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:37.803Z,1509050857.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:38.216Z,1509050858.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:38.618Z,1509050858.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:39.045Z,1509050859.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:39.414Z,1509050859.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:39.799Z,1509050859.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:40.227Z,1509050860.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:40.580Z,1509050860.580 [PNI_TCM](ERROR): CRC does not match. Expected:0x62513 got:0x21858
2017-10-26T20:47:40.618Z,1509050860.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:41.057Z,1509050861.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:41.407Z,1509050861.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:41.810Z,1509050861.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:42.223Z,1509050862.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:42.593Z,1509050862.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:43.060Z,1509050863.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:43.584Z,1509050863.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:43.945Z,1509050863.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:44.374Z,1509050864.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:44.778Z,1509050864.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:45.271Z,1509050865.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:45.579Z,1509050865.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:45.974Z,1509050865.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:46.397Z,1509050866.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:46.774Z,1509050866.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:47.230Z,1509050867.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:47.559Z,1509050867.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:47.991Z,1509050867.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:48.360Z,1509050868.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:48.786Z,1509050868.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:49.193Z,1509050869.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:49.590Z,1509050869.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:49.967Z,1509050869.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:50.366Z,1509050870.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:50.760Z,1509050870.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:51.213Z,1509050871.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:51.576Z,1509050871.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:51.978Z,1509050871.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:52.366Z,1509050872.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:52.763Z,1509050872.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:53.193Z,1509050873.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:53.561Z,1509050873.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:53.970Z,1509050873.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:54.369Z,1509050874.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:54.770Z,1509050874.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:55.204Z,1509050875.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:55.558Z,1509050875.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:55.965Z,1509050875.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:56.433Z,1509050876.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:56.779Z,1509050876.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:57.193Z,1509050877.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:57.562Z,1509050877.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:57.969Z,1509050877.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:58.366Z,1509050878.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:58.767Z,1509050878.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:59.214Z,1509050879.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:59.565Z,1509050879.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:47:59.979Z,1509050879.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:00.439Z,1509050880.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:00.754Z,1509050880.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:01.193Z,1509050881.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:01.600Z,1509050881.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:01.979Z,1509050881.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:02.392Z,1509050882.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:02.708Z,1509050882.708 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:48:02.801Z,1509050882.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:03.211Z,1509050883.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:03.589Z,1509050883.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:03.980Z,1509050883.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:04.355Z,1509050884.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:04.765Z,1509050884.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:05.200Z,1509050885.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:05.560Z,1509050885.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:06.092Z,1509050886.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:06.359Z,1509050886.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:06.763Z,1509050886.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:07.191Z,1509050887.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:07.562Z,1509050887.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:07.958Z,1509050887.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:08.366Z,1509050888.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:08.756Z,1509050888.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:09.160Z,1509050889.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:09.572Z,1509050889.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:09.968Z,1509050889.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:10.381Z,1509050890.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:10.747Z,1509050890.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:11.190Z,1509050891.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:11.564Z,1509050891.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:11.969Z,1509050891.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:12.365Z,1509050892.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:12.770Z,1509050892.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:13.262Z,1509050893.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:13.603Z,1509050893.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:13.952Z,1509050893.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:14.369Z,1509050894.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:14.800Z,1509050894.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:15.198Z,1509050895.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:15.562Z,1509050895.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:15.997Z,1509050895.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:16.375Z,1509050896.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:16.797Z,1509050896.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:17.261Z,1509050897.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:17.575Z,1509050897.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:17.969Z,1509050897.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:18.387Z,1509050898.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:18.802Z,1509050898.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:19.194Z,1509050899.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:19.560Z,1509050899.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:19.964Z,1509050899.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:20.368Z,1509050900.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:20.763Z,1509050900.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:21.199Z,1509050901.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:21.552Z,1509050901.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:21.957Z,1509050901.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:22.355Z,1509050902.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:22.782Z,1509050902.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:23.200Z,1509050903.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:23.555Z,1509050903.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:23.947Z,1509050903.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:24.347Z,1509050904.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:24.747Z,1509050904.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:25.190Z,1509050905.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:25.579Z,1509050905.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:25.949Z,1509050905.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:26.354Z,1509050906.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:26.780Z,1509050906.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:27.187Z,1509050907.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:27.575Z,1509050907.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:27.993Z,1509050907.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:28.380Z,1509050908.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:28.771Z,1509050908.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:29.219Z,1509050909.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:29.584Z,1509050909.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:30.005Z,1509050910.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:30.372Z,1509050910.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:30.804Z,1509050910.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:31.215Z,1509050911.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:31.569Z,1509050911.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:31.968Z,1509050911.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:32.355Z,1509050912.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:32.765Z,1509050912.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:33.192Z,1509050913.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:33.567Z,1509050913.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:34.005Z,1509050914.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:34.363Z,1509050914.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:34.773Z,1509050914.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:35.231Z,1509050915.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:35.601Z,1509050915.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:35.968Z,1509050915.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:36.356Z,1509050916.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:36.772Z,1509050916.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:37.186Z,1509050917.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:37.564Z,1509050917.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:37.954Z,1509050917.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:38.356Z,1509050918.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:38.774Z,1509050918.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:39.190Z,1509050919.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:39.559Z,1509050919.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:39.971Z,1509050919.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:40.352Z,1509050920.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:40.783Z,1509050920.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:41.185Z,1509050921.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:41.557Z,1509050921.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:41.999Z,1509050921.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:42.363Z,1509050922.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:42.771Z,1509050922.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:43.232Z,1509050923.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:43.567Z,1509050923.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:43.964Z,1509050923.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:44.395Z,1509050924.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:44.772Z,1509050924.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:45.231Z,1509050925.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:45.589Z,1509050925.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:45.986Z,1509050925.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:46.359Z,1509050926.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:46.807Z,1509050926.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:47.202Z,1509050927.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:47.582Z,1509050927.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:47.978Z,1509050927.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:48.364Z,1509050928.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:48.770Z,1509050928.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:49.198Z,1509050929.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:49.562Z,1509050929.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:49.979Z,1509050929.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:50.364Z,1509050930.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:50.801Z,1509050930.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:51.202Z,1509050931.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:51.578Z,1509050931.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:51.976Z,1509050931.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:52.429Z,1509050932.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:52.760Z,1509050932.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:53.199Z,1509050933.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:53.560Z,1509050933.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:53.964Z,1509050933.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:54.369Z,1509050934.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:54.751Z,1509050934.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:55.192Z,1509050935.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:55.560Z,1509050935.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:55.965Z,1509050935.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:56.374Z,1509050936.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:56.770Z,1509050936.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:57.212Z,1509050937.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:57.563Z,1509050937.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:58.000Z,1509050938.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:58.361Z,1509050938.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:58.782Z,1509050938.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:59.204Z,1509050939.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:48:59.571Z,1509050939.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:00.011Z,1509050940.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:00.369Z,1509050940.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:00.770Z,1509050940.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:01.212Z,1509050941.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:01.567Z,1509050941.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:01.956Z,1509050941.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:02.363Z,1509050942.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:02.755Z,1509050942.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:03.106Z,1509050943.106 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:49:03.218Z,1509050943.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:03.597Z,1509050943.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:03.984Z,1509050943.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:04.362Z,1509050944.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:04.757Z,1509050944.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:05.200Z,1509050945.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:05.589Z,1509050945.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:06.202Z,1509050946.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:06.552Z,1509050946.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:06.957Z,1509050946.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:07.352Z,1509050947.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:07.763Z,1509050947.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:08.190Z,1509050948.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:08.562Z,1509050948.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:08.000Z,1509050949.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:09.382Z,1509050949.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:09.762Z,1509050949.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:10.205Z,1509050950.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:10.582Z,1509050950.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:11.023Z,1509050951.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:11.384Z,1509050951.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:11.779Z,1509050951.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:12.210Z,1509050952.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:12.579Z,1509050952.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:13.042Z,1509050953.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:13.392Z,1509050953.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:13.786Z,1509050953.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:14.206Z,1509050954.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:14.599Z,1509050954.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:15.058Z,1509050955.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:15.387Z,1509050955.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:15.770Z,1509050955.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:16.199Z,1509050956.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:16.576Z,1509050956.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:17.036Z,1509050957.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:17.347Z,1509050957.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:17.757Z,1509050957.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:18.189Z,1509050958.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:18.569Z,1509050958.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:19.045Z,1509050959.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:19.403Z,1509050959.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:19.779Z,1509050959.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:20.207Z,1509050960.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:20.588Z,1509050960.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:21.034Z,1509050961.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:21.391Z,1509050961.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:21.770Z,1509050961.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:22.203Z,1509050962.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:22.583Z,1509050962.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:23.031Z,1509050963.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:23.348Z,1509050963.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:23.750Z,1509050963.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:24.156Z,1509050964.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:24.582Z,1509050964.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:25.030Z,1509050965.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:25.372Z,1509050965.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:25.753Z,1509050965.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:26.199Z,1509050966.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:26.565Z,1509050966.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:27.069Z,1509050967.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:27.429Z,1509050967.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:27.773Z,1509050967.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:28.197Z,1509050968.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:28.593Z,1509050968.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:28.949Z,1509050968.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:29.412Z,1509050969.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:29.765Z,1509050969.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:30.202Z,1509050970.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:30.564Z,1509050970.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:31.034Z,1509050971.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:31.387Z,1509050971.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:31.770Z,1509050971.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:32.200Z,1509050972.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:32.555Z,1509050972.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:33.025Z,1509050973.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:33.367Z,1509050973.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:33.790Z,1509050973.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:34.184Z,1509050974.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:34.560Z,1509050974.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:35.041Z,1509050975.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:35.401Z,1509050975.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:35.796Z,1509050975.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:36.198Z,1509050976.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:36.572Z,1509050976.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:37.039Z,1509050977.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:37.370Z,1509050977.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:37.777Z,1509050977.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:38.196Z,1509050978.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:38.555Z,1509050978.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:39.025Z,1509050979.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:39.377Z,1509050979.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:39.762Z,1509050979.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:40.220Z,1509050980.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:40.581Z,1509050980.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:41.026Z,1509050981.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:41.393Z,1509050981.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:41.800Z,1509050981.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:42.229Z,1509050982.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:42.564Z,1509050982.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:43.050Z,1509050983.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:43.350Z,1509050983.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:43.801Z,1509050983.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:44.196Z,1509050984.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:44.555Z,1509050984.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:45.055Z,1509050985.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:45.378Z,1509050985.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:45.778Z,1509050985.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:46.202Z,1509050986.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:46.556Z,1509050986.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:47.090Z,1509050987.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:47.452Z,1509050987.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:47.861Z,1509050987.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:48.243Z,1509050988.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:48.651Z,1509050988.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:49.079Z,1509050989.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:49.456Z,1509050989.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:49.853Z,1509050989.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:50.255Z,1509050990.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:50.650Z,1509050990.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:51.074Z,1509050991.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:51.467Z,1509050991.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:51.861Z,1509050991.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:52.284Z,1509050992.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:52.653Z,1509050992.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:53.097Z,1509050993.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:53.458Z,1509050993.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:53.851Z,1509050993.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:54.259Z,1509050994.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:54.644Z,1509050994.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:55.085Z,1509050995.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:55.445Z,1509050995.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:55.846Z,1509050995.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:56.297Z,1509050996.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:56.683Z,1509050996.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:57.129Z,1509050997.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:57.489Z,1509050997.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:57.889Z,1509050997.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:58.294Z,1509050998.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:58.690Z,1509050998.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:59.058Z,1509050999.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:59.457Z,1509050999.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:49:59.853Z,1509050999.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:00.270Z,1509051000.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:00.660Z,1509051000.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:01.086Z,1509051001.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:01.469Z,1509051001.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:01.856Z,1509051001.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:02.272Z,1509051002.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:02.643Z,1509051002.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:03.027Z,1509051003.027 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:50:03.117Z,1509051003.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:03.461Z,1509051003.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:03.860Z,1509051003.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:04.263Z,1509051004.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:04.656Z,1509051004.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:05.088Z,1509051005.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:05.458Z,1509051005.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:05.859Z,1509051005.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:06.259Z,1509051006.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:06.668Z,1509051006.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:07.042Z,1509051007.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:07.449Z,1509051007.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:07.846Z,1509051007.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:08.244Z,1509051008.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:08.655Z,1509051008.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:09.073Z,1509051009.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:09.458Z,1509051009.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:09.871Z,1509051009.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:10.242Z,1509051010.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:10.708Z,1509051010.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:11.077Z,1509051011.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:11.478Z,1509051011.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:11.856Z,1509051011.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:12.295Z,1509051012.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:12.652Z,1509051012.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:13.066Z,1509051013.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:13.467Z,1509051013.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:13.839Z,1509051013.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:14.269Z,1509051014.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:14.646Z,1509051014.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:15.092Z,1509051015.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:15.502Z,1509051015.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:15.839Z,1509051015.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:16.241Z,1509051016.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:16.657Z,1509051016.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:17.099Z,1509051017.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:17.479Z,1509051017.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:17.852Z,1509051017.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:18.251Z,1509051018.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:18.654Z,1509051018.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:19.106Z,1509051019.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:19.456Z,1509051019.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:19.859Z,1509051019.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:20.257Z,1509051020.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:20.657Z,1509051020.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:21.061Z,1509051021.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:21.461Z,1509051021.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:21.856Z,1509051021.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:22.267Z,1509051022.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:22.668Z,1509051022.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:23.111Z,1509051023.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:23.456Z,1509051023.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:23.852Z,1509051023.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:24.253Z,1509051024.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:24.671Z,1509051024.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:25.188Z,1509051025.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:25.475Z,1509051025.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:25.862Z,1509051025.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:26.285Z,1509051026.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:26.654Z,1509051026.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:27.104Z,1509051027.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:27.472Z,1509051027.472 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:27.472Z,1509051027.472 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 21
2017-10-26T20:50:27.472Z,1509051027.472 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:50:27.476Z,1509051027.476 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:27.477Z,1509051027.477 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 21
2017-10-26T20:50:27.477Z,1509051027.477 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:50:27.595Z,1509051027.595 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:50:27.595Z,1509051027.595 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:50:27.962Z,1509051027.962 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:50:27.962Z,1509051027.962 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 21
2017-10-26T20:50:27.963Z,1509051027.963 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:50:27.963Z,1509051027.963 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 21
2017-10-26T20:50:28.238Z,1509051028.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:50:28.238Z,1509051028.238 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:50:28.239Z,1509051028.239 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:50:28.241Z,1509051028.241 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:50:28.242Z,1509051028.242 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:50:28.242Z,1509051028.242 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:50:28.643Z,1509051028.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:29.116Z,1509051029.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:29.460Z,1509051029.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:29.854Z,1509051029.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:30.256Z,1509051030.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:30.648Z,1509051030.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:31.175Z,1509051031.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:31.453Z,1509051031.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:31.851Z,1509051031.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:32.253Z,1509051032.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:32.653Z,1509051032.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:33.058Z,1509051033.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:33.455Z,1509051033.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:33.863Z,1509051033.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:34.260Z,1509051034.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:34.666Z,1509051034.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:35.050Z,1509051035.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:35.448Z,1509051035.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:35.877Z,1509051035.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:36.256Z,1509051036.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:36.655Z,1509051036.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:37.054Z,1509051037.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:37.457Z,1509051037.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:37.851Z,1509051037.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:38.261Z,1509051038.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:38.661Z,1509051038.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:39.080Z,1509051039.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:39.474Z,1509051039.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:39.859Z,1509051039.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:40.247Z,1509051040.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:40.652Z,1509051040.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:41.076Z,1509051041.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:41.459Z,1509051041.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:41.869Z,1509051041.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:42.268Z,1509051042.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:42.641Z,1509051042.641 [BPC1](ERROR): Failed to receive battery data
2017-10-26T20:50:42.641Z,1509051042.641 [BPC1] Communications Fault, FailCount= 1
2017-10-26T20:50:42.641Z,1509051042.641 [BPC1](ERROR): Communications Fault
2017-10-26T20:50:42.650Z,1509051042.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:42.705Z,1509051042.705 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T20:50:43.099Z,1509051043.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:43.456Z,1509051043.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:43.856Z,1509051043.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:43.948Z,1509051043.948 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:50:43.948Z,1509051043.948 [BPC1] No Fault, FailCount= 1
2017-10-26T20:50:44.309Z,1509051044.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:44.664Z,1509051044.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:45.184Z,1509051045.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:45.463Z,1509051045.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:45.881Z,1509051045.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:46.264Z,1509051046.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:46.653Z,1509051046.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:47.086Z,1509051047.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:47.458Z,1509051047.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:47.860Z,1509051047.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:48.257Z,1509051048.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:48.651Z,1509051048.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:49.047Z,1509051049.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:49.449Z,1509051049.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:49.889Z,1509051049.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:50.250Z,1509051050.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:50.658Z,1509051050.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:51.047Z,1509051051.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:51.447Z,1509051051.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:51.844Z,1509051051.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:52.262Z,1509051052.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:52.653Z,1509051052.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:53.071Z,1509051053.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:53.452Z,1509051053.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:53.848Z,1509051053.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:54.262Z,1509051054.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:54.657Z,1509051054.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:55.074Z,1509051055.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:55.450Z,1509051055.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:55.859Z,1509051055.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:56.321Z,1509051056.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:56.664Z,1509051056.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:57.104Z,1509051057.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:57.445Z,1509051057.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:57.878Z,1509051057.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:58.277Z,1509051058.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:58.695Z,1509051058.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:59.182Z,1509051059.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:59.474Z,1509051059.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:50:59.848Z,1509051059.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:00.260Z,1509051060.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:00.663Z,1509051060.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:01.063Z,1509051061.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:01.457Z,1509051061.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:01.854Z,1509051061.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:02.265Z,1509051062.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:02.646Z,1509051062.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:03.048Z,1509051063.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:03.409Z,1509051063.409 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:51:03.462Z,1509051063.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:03.859Z,1509051063.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:04.257Z,1509051064.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:04.666Z,1509051064.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:05.047Z,1509051065.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:05.448Z,1509051065.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:05.851Z,1509051065.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:06.267Z,1509051066.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:06.653Z,1509051066.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:07.102Z,1509051067.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:07.461Z,1509051067.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:07.990Z,1509051067.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:08.399Z,1509051068.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:08.792Z,1509051068.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:09.244Z,1509051069.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:09.608Z,1509051069.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:09.973Z,1509051069.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:10.372Z,1509051070.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:10.785Z,1509051070.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:11.208Z,1509051071.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:11.615Z,1509051071.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:11.989Z,1509051071.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:12.431Z,1509051072.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:12.786Z,1509051072.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:13.229Z,1509051073.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:13.591Z,1509051073.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:14.007Z,1509051074.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:14.391Z,1509051074.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:14.803Z,1509051074.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:15.229Z,1509051075.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:15.591Z,1509051075.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:15.976Z,1509051075.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:16.386Z,1509051076.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:16.784Z,1509051076.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:17.191Z,1509051077.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:17.669Z,1509051077.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:17.993Z,1509051077.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:18.379Z,1509051078.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:18.807Z,1509051078.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:19.198Z,1509051079.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:19.583Z,1509051079.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:19.983Z,1509051079.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:20.406Z,1509051080.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:20.782Z,1509051080.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:21.208Z,1509051081.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:21.580Z,1509051081.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:21.995Z,1509051081.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:22.386Z,1509051082.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:22.789Z,1509051082.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:23.210Z,1509051083.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:23.598Z,1509051083.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:23.991Z,1509051083.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:24.427Z,1509051084.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:24.782Z,1509051084.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:25.192Z,1509051085.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:25.586Z,1509051085.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:26.006Z,1509051086.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:26.388Z,1509051086.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:26.795Z,1509051086.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:27.219Z,1509051087.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:27.577Z,1509051087.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:28.020Z,1509051088.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:28.381Z,1509051088.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:28.834Z,1509051088.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:29.214Z,1509051089.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:29.580Z,1509051089.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:29.989Z,1509051089.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:30.387Z,1509051090.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:30.792Z,1509051090.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:31.198Z,1509051091.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:31.601Z,1509051091.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:31.997Z,1509051091.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:32.377Z,1509051092.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:32.780Z,1509051092.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:33.195Z,1509051093.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:33.582Z,1509051093.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:33.985Z,1509051093.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:34.399Z,1509051094.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:34.789Z,1509051094.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:35.208Z,1509051095.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:35.637Z,1509051095.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:35.988Z,1509051095.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:36.388Z,1509051096.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:36.786Z,1509051096.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:37.235Z,1509051097.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:37.580Z,1509051097.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:37.992Z,1509051097.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:38.389Z,1509051098.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:38.783Z,1509051098.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:39.214Z,1509051099.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:39.611Z,1509051099.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:39.971Z,1509051099.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:40.388Z,1509051100.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:40.820Z,1509051100.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:41.227Z,1509051101.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:41.627Z,1509051101.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:41.982Z,1509051101.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:42.411Z,1509051102.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:42.816Z,1509051102.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:43.211Z,1509051103.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:43.581Z,1509051103.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:43.982Z,1509051103.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:44.382Z,1509051104.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:44.780Z,1509051104.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:45.209Z,1509051105.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:45.589Z,1509051105.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:45.986Z,1509051105.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:46.387Z,1509051106.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:46.800Z,1509051106.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:47.213Z,1509051107.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:47.582Z,1509051107.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:47.973Z,1509051107.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:48.410Z,1509051108.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:48.792Z,1509051108.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:49.233Z,1509051109.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:49.588Z,1509051109.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:49.985Z,1509051109.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:50.454Z,1509051110.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:50.847Z,1509051110.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:51.269Z,1509051111.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:51.657Z,1509051111.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:52.048Z,1509051112.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:52.471Z,1509051112.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:52.853Z,1509051112.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:53.357Z,1509051113.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:53.659Z,1509051113.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:54.056Z,1509051114.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:54.468Z,1509051114.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:54.875Z,1509051114.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:55.281Z,1509051115.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:55.655Z,1509051115.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:56.088Z,1509051116.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:56.446Z,1509051116.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:56.874Z,1509051116.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:57.303Z,1509051117.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:57.656Z,1509051117.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:58.062Z,1509051118.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:58.456Z,1509051118.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:58.862Z,1509051118.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:59.255Z,1509051119.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:51:59.655Z,1509051119.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:00.050Z,1509051120.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:00.461Z,1509051120.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:00.851Z,1509051120.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:01.261Z,1509051121.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:01.663Z,1509051121.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:02.050Z,1509051122.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:02.448Z,1509051122.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:02.847Z,1509051122.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:03.197Z,1509051123.197 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:52:03.257Z,1509051123.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:03.653Z,1509051123.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:04.037Z,1509051124.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:04.468Z,1509051124.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:04.880Z,1509051124.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:05.268Z,1509051125.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:05.641Z,1509051125.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:06.072Z,1509051126.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:06.482Z,1509051126.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:06.857Z,1509051126.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:07.251Z,1509051127.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:07.663Z,1509051127.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:08.058Z,1509051128.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:08.518Z,1509051128.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:08.841Z,1509051128.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:09.301Z,1509051129.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:09.654Z,1509051129.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:10.095Z,1509051130.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:10.457Z,1509051130.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:10.884Z,1509051130.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:11.277Z,1509051131.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:11.672Z,1509051131.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:12.046Z,1509051132.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:12.444Z,1509051132.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:12.854Z,1509051132.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:13.259Z,1509051133.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:13.660Z,1509051133.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:14.039Z,1509051134.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:14.469Z,1509051134.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:14.865Z,1509051134.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:15.262Z,1509051135.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:15.658Z,1509051135.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:16.036Z,1509051136.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:16.449Z,1509051136.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:16.854Z,1509051136.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:17.263Z,1509051137.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:17.656Z,1509051137.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:18.050Z,1509051138.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:18.448Z,1509051138.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:18.854Z,1509051138.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:19.269Z,1509051139.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:19.671Z,1509051139.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:20.062Z,1509051140.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:20.461Z,1509051140.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:20.866Z,1509051140.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:21.256Z,1509051141.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:21.652Z,1509051141.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:22.073Z,1509051142.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:22.455Z,1509051142.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:22.864Z,1509051142.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:23.290Z,1509051143.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:23.656Z,1509051143.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:24.057Z,1509051144.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:24.535Z,1509051144.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:24.853Z,1509051144.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:25.302Z,1509051145.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:25.693Z,1509051145.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:26.046Z,1509051146.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:26.437Z,1509051146.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:26.875Z,1509051146.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:27.254Z,1509051147.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:27.661Z,1509051147.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:28.060Z,1509051148.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:28.446Z,1509051148.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:28.866Z,1509051148.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:29.257Z,1509051149.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:29.671Z,1509051149.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:30.047Z,1509051150.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:30.476Z,1509051150.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:30.866Z,1509051150.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:31.251Z,1509051151.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:31.649Z,1509051151.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:32.053Z,1509051152.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:32.454Z,1509051152.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:32.853Z,1509051152.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:33.266Z,1509051153.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:33.667Z,1509051153.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:34.043Z,1509051154.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:34.440Z,1509051154.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:34.844Z,1509051154.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:35.253Z,1509051155.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:35.653Z,1509051155.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:36.061Z,1509051156.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:36.516Z,1509051156.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:36.866Z,1509051156.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:37.307Z,1509051157.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:37.651Z,1509051157.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:38.061Z,1509051158.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:38.493Z,1509051158.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:38.851Z,1509051158.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:39.271Z,1509051159.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:39.672Z,1509051159.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:40.065Z,1509051160.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:40.465Z,1509051160.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:40.840Z,1509051160.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:41.326Z,1509051161.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:41.652Z,1509051161.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:42.066Z,1509051162.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:42.461Z,1509051162.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:42.861Z,1509051162.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:43.269Z,1509051163.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:43.743Z,1509051163.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:44.041Z,1509051164.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:44.446Z,1509051164.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:44.841Z,1509051164.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:45.258Z,1509051165.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:45.704Z,1509051165.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:46.038Z,1509051166.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:46.438Z,1509051166.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:46.846Z,1509051166.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:47.271Z,1509051167.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:47.665Z,1509051167.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:48.041Z,1509051168.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:48.458Z,1509051168.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:48.858Z,1509051168.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:49.267Z,1509051169.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:49.664Z,1509051169.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:50.041Z,1509051170.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:50.447Z,1509051170.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:50.880Z,1509051170.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:51.265Z,1509051171.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:51.661Z,1509051171.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:52.072Z,1509051172.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:52.456Z,1509051172.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:52.871Z,1509051172.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:53.280Z,1509051173.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:53.648Z,1509051173.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:54.078Z,1509051174.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:54.477Z,1509051174.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:54.855Z,1509051174.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:55.324Z,1509051175.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:55.651Z,1509051175.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:56.063Z,1509051176.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:56.438Z,1509051176.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:56.846Z,1509051176.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:57.240Z,1509051177.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:57.732Z,1509051177.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:58.056Z,1509051178.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:58.452Z,1509051178.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:58.856Z,1509051178.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:59.249Z,1509051179.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:52:59.691Z,1509051179.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:00.063Z,1509051180.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:00.460Z,1509051180.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:00.846Z,1509051180.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:01.253Z,1509051181.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:01.658Z,1509051181.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:02.048Z,1509051182.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:02.461Z,1509051182.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:02.852Z,1509051182.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:03.251Z,1509051183.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:03.605Z,1509051183.605 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:53:03.671Z,1509051183.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:04.058Z,1509051184.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:04.468Z,1509051184.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:04.842Z,1509051184.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:05.248Z,1509051185.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:05.652Z,1509051185.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:06.058Z,1509051186.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:06.442Z,1509051186.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:06.971Z,1509051186.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:07.249Z,1509051187.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:07.656Z,1509051187.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:08.065Z,1509051188.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:08.462Z,1509051188.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:08.837Z,1509051188.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:09.273Z,1509051189.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:09.642Z,1509051189.642 [BPC1](ERROR): Failed to receive battery data
2017-10-26T20:53:09.642Z,1509051189.642 [BPC1] Communications Fault, FailCount= 1
2017-10-26T20:53:09.642Z,1509051189.642 [BPC1](ERROR): Communications Fault
2017-10-26T20:53:09.680Z,1509051189.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:09.784Z,1509051189.784 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T20:53:10.037Z,1509051190.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:10.440Z,1509051190.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:10.854Z,1509051190.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:10.970Z,1509051190.970 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:53:10.970Z,1509051190.970 [BPC1] No Fault, FailCount= 1
2017-10-26T20:53:11.294Z,1509051191.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:11.660Z,1509051191.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:12.046Z,1509051192.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:12.447Z,1509051192.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:12.847Z,1509051192.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:13.272Z,1509051193.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:13.679Z,1509051193.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:14.057Z,1509051194.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:14.454Z,1509051194.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:14.858Z,1509051194.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:15.251Z,1509051195.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:15.662Z,1509051195.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:16.058Z,1509051196.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:16.431Z,1509051196.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:16.861Z,1509051196.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:17.377Z,1509051197.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:17.787Z,1509051197.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:18.208Z,1509051198.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:18.584Z,1509051198.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:19.037Z,1509051199.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:19.365Z,1509051199.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:19.800Z,1509051199.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:20.210Z,1509051200.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:20.569Z,1509051200.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:21.045Z,1509051201.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:21.403Z,1509051201.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:21.781Z,1509051201.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:22.212Z,1509051202.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:22.629Z,1509051202.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:23.039Z,1509051203.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:23.402Z,1509051203.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:23.815Z,1509051203.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:24.206Z,1509051204.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:24.581Z,1509051204.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:25.056Z,1509051205.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:25.451Z,1509051205.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:25.779Z,1509051205.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:26.233Z,1509051206.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:26.584Z,1509051206.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:27.046Z,1509051207.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:27.411Z,1509051207.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:27.774Z,1509051207.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:28.200Z,1509051208.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:28.588Z,1509051208.588 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:28.589Z,1509051208.589 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 22
2017-10-26T20:53:28.589Z,1509051208.589 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:53:28.621Z,1509051208.621 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:28.622Z,1509051208.622 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 22
2017-10-26T20:53:28.622Z,1509051208.622 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:53:28.731Z,1509051208.731 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:53:28.731Z,1509051208.731 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:53:29.155Z,1509051209.155 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:53:29.155Z,1509051209.155 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 22
2017-10-26T20:53:29.156Z,1509051209.156 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:53:29.156Z,1509051209.156 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 22
2017-10-26T20:53:29.404Z,1509051209.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:53:29.405Z,1509051209.405 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:53:29.405Z,1509051209.405 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:53:29.418Z,1509051209.418 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:53:29.419Z,1509051209.419 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:53:29.419Z,1509051209.419 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:53:29.781Z,1509051209.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:30.195Z,1509051210.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:30.586Z,1509051210.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:31.062Z,1509051211.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:31.376Z,1509051211.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:31.785Z,1509051211.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:32.202Z,1509051212.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:32.581Z,1509051212.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:33.053Z,1509051213.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:33.373Z,1509051213.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:33.784Z,1509051213.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:34.206Z,1509051214.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:34.567Z,1509051214.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:35.072Z,1509051215.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:35.386Z,1509051215.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:35.775Z,1509051215.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:36.203Z,1509051216.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:36.578Z,1509051216.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:37.026Z,1509051217.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:37.399Z,1509051217.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:37.773Z,1509051217.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:38.203Z,1509051218.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:38.591Z,1509051218.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:39.036Z,1509051219.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:39.417Z,1509051219.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:39.821Z,1509051219.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:40.206Z,1509051220.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:40.611Z,1509051220.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:41.028Z,1509051221.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:41.404Z,1509051221.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:41.793Z,1509051221.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:42.207Z,1509051222.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:42.583Z,1509051222.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:43.036Z,1509051223.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:43.402Z,1509051223.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:43.775Z,1509051223.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:44.202Z,1509051224.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:44.573Z,1509051224.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:45.058Z,1509051225.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:45.386Z,1509051225.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:45.771Z,1509051225.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:46.197Z,1509051226.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:46.587Z,1509051226.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:47.039Z,1509051227.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:47.383Z,1509051227.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:47.778Z,1509051227.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:48.202Z,1509051228.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:48.589Z,1509051228.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:49.028Z,1509051229.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:49.414Z,1509051229.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:49.761Z,1509051229.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:50.196Z,1509051230.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:50.595Z,1509051230.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:51.027Z,1509051231.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:51.396Z,1509051231.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:51.793Z,1509051231.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:52.195Z,1509051232.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:52.595Z,1509051232.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:53.053Z,1509051233.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:53.407Z,1509051233.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:53.815Z,1509051233.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:54.248Z,1509051234.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:54.573Z,1509051234.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:55.056Z,1509051235.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:55.408Z,1509051235.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:55.802Z,1509051235.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:56.231Z,1509051236.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:56.583Z,1509051236.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:57.040Z,1509051237.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:57.408Z,1509051237.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:57.767Z,1509051237.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:58.206Z,1509051238.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:58.592Z,1509051238.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:59.061Z,1509051239.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:59.390Z,1509051239.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:53:59.776Z,1509051239.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:00.277Z,1509051240.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:00.680Z,1509051240.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:01.087Z,1509051241.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:01.510Z,1509051241.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:01.877Z,1509051241.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:02.272Z,1509051242.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:02.673Z,1509051242.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:03.078Z,1509051243.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:03.442Z,1509051243.442 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:54:03.497Z,1509051243.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:03.881Z,1509051243.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:04.286Z,1509051244.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:04.672Z,1509051244.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:05.077Z,1509051245.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:05.481Z,1509051245.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:05.880Z,1509051245.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:06.275Z,1509051246.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:06.707Z,1509051246.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:07.076Z,1509051247.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:07.480Z,1509051247.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:07.881Z,1509051247.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:08.263Z,1509051248.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:08.738Z,1509051248.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:09.080Z,1509051249.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:09.508Z,1509051249.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:09.872Z,1509051249.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:10.297Z,1509051250.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:10.706Z,1509051250.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:11.082Z,1509051251.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:11.468Z,1509051251.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:11.877Z,1509051251.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:12.287Z,1509051252.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:12.687Z,1509051252.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:13.098Z,1509051253.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:13.470Z,1509051253.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:13.884Z,1509051253.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:14.267Z,1509051254.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:14.676Z,1509051254.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:15.076Z,1509051255.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:15.474Z,1509051255.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:15.877Z,1509051255.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:16.259Z,1509051256.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:16.660Z,1509051256.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:17.091Z,1509051257.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:17.509Z,1509051257.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:17.888Z,1509051257.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:18.277Z,1509051258.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:18.678Z,1509051258.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:19.095Z,1509051259.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:19.474Z,1509051259.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:19.886Z,1509051259.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:20.275Z,1509051260.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:20.371Z,1509051260.371 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T20:54:20.679Z,1509051260.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:21.112Z,1509051261.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:21.474Z,1509051261.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:21.877Z,1509051261.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:22.269Z,1509051262.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:22.732Z,1509051262.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:23.074Z,1509051263.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:23.521Z,1509051263.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:23.892Z,1509051263.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:24.303Z,1509051264.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:24.715Z,1509051264.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:25.111Z,1509051265.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:25.489Z,1509051265.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:25.870Z,1509051265.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:26.278Z,1509051266.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:26.673Z,1509051266.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:27.098Z,1509051267.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:27.480Z,1509051267.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:27.867Z,1509051267.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:28.274Z,1509051268.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:28.673Z,1509051268.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:29.088Z,1509051269.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:29.474Z,1509051269.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:29.869Z,1509051269.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:30.289Z,1509051270.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:30.671Z,1509051270.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:31.174Z,1509051271.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:31.489Z,1509051271.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:31.872Z,1509051271.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:32.273Z,1509051272.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:32.677Z,1509051272.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:33.072Z,1509051273.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:33.470Z,1509051273.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:33.881Z,1509051273.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:34.277Z,1509051274.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:34.672Z,1509051274.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:35.133Z,1509051275.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:35.469Z,1509051275.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:35.874Z,1509051275.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:36.277Z,1509051276.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:36.738Z,1509051276.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:37.078Z,1509051277.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:37.471Z,1509051277.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:37.902Z,1509051277.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:38.268Z,1509051278.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:38.693Z,1509051278.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:39.106Z,1509051279.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:39.490Z,1509051279.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:39.868Z,1509051279.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:40.292Z,1509051280.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:40.676Z,1509051280.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:41.094Z,1509051281.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:41.478Z,1509051281.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:41.883Z,1509051281.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:42.287Z,1509051282.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:42.679Z,1509051282.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:43.185Z,1509051283.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:43.478Z,1509051283.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:43.877Z,1509051283.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:44.305Z,1509051284.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:44.682Z,1509051284.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:45.064Z,1509051285.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:45.475Z,1509051285.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:45.868Z,1509051285.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:46.288Z,1509051286.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:46.675Z,1509051286.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:47.074Z,1509051287.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:47.490Z,1509051287.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:47.871Z,1509051287.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:48.286Z,1509051288.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:48.670Z,1509051288.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:49.074Z,1509051289.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:49.492Z,1509051289.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:49.866Z,1509051289.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:50.264Z,1509051290.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:50.675Z,1509051290.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:51.139Z,1509051291.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:51.528Z,1509051291.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:51.868Z,1509051291.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:52.268Z,1509051292.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:52.720Z,1509051292.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:53.090Z,1509051293.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:53.509Z,1509051293.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:53.867Z,1509051293.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:54.301Z,1509051294.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:54.675Z,1509051294.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:55.110Z,1509051295.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:55.488Z,1509051295.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:55.870Z,1509051295.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:56.270Z,1509051296.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:56.670Z,1509051296.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:57.138Z,1509051297.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:57.484Z,1509051297.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:57.879Z,1509051297.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:58.275Z,1509051298.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:58.682Z,1509051298.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:59.074Z,1509051299.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:59.492Z,1509051299.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:54:59.890Z,1509051299.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:00.286Z,1509051300.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:00.670Z,1509051300.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:01.067Z,1509051301.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:01.471Z,1509051301.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:01.884Z,1509051301.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:02.274Z,1509051302.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:02.676Z,1509051302.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:03.075Z,1509051303.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:03.429Z,1509051303.429 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:55:03.481Z,1509051303.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:03.880Z,1509051303.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:04.270Z,1509051304.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:04.679Z,1509051304.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:05.079Z,1509051305.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:05.473Z,1509051305.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:05.874Z,1509051305.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:06.299Z,1509051306.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:06.730Z,1509051306.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:07.107Z,1509051307.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:07.542Z,1509051307.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:07.875Z,1509051307.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:08.308Z,1509051308.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:08.736Z,1509051308.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:09.092Z,1509051309.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:09.471Z,1509051309.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:09.873Z,1509051309.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:10.272Z,1509051310.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:10.674Z,1509051310.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:11.179Z,1509051311.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:11.473Z,1509051311.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:11.870Z,1509051311.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:12.289Z,1509051312.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:12.667Z,1509051312.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:13.071Z,1509051313.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:13.482Z,1509051313.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:13.883Z,1509051313.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:14.278Z,1509051314.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:14.672Z,1509051314.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:15.075Z,1509051315.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:15.466Z,1509051315.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:15.890Z,1509051315.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:16.272Z,1509051316.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:16.692Z,1509051316.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:17.068Z,1509051317.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:17.473Z,1509051317.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:17.917Z,1509051317.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:18.273Z,1509051318.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:18.678Z,1509051318.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:19.098Z,1509051319.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:19.486Z,1509051319.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:19.864Z,1509051319.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:20.273Z,1509051320.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:20.742Z,1509051320.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:21.123Z,1509051321.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:21.477Z,1509051321.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:21.904Z,1509051321.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:22.268Z,1509051322.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:22.709Z,1509051322.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:23.103Z,1509051323.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:23.478Z,1509051323.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:23.872Z,1509051323.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:24.275Z,1509051324.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:24.668Z,1509051324.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:25.086Z,1509051325.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:25.464Z,1509051325.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:25.877Z,1509051325.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:26.279Z,1509051326.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:26.691Z,1509051326.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:27.131Z,1509051327.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:27.490Z,1509051327.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:27.877Z,1509051327.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:28.273Z,1509051328.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:28.685Z,1509051328.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:29.223Z,1509051329.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:29.651Z,1509051329.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:30.062Z,1509051330.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:30.451Z,1509051330.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:30.845Z,1509051330.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:31.257Z,1509051331.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:31.659Z,1509051331.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:32.059Z,1509051332.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:32.442Z,1509051332.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:32.837Z,1509051332.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:33.247Z,1509051333.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:33.645Z,1509051333.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:34.045Z,1509051334.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:34.448Z,1509051334.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:34.876Z,1509051334.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:35.280Z,1509051335.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:35.655Z,1509051335.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:36.044Z,1509051336.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:36.476Z,1509051336.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:36.860Z,1509051336.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:37.279Z,1509051337.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:37.688Z,1509051337.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:38.046Z,1509051338.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:38.450Z,1509051338.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:38.849Z,1509051338.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:39.267Z,1509051339.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:39.648Z,1509051339.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:40.040Z,1509051340.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:40.447Z,1509051340.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:40.857Z,1509051340.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:41.248Z,1509051341.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:41.654Z,1509051341.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:42.048Z,1509051342.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:42.469Z,1509051342.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:42.848Z,1509051342.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:43.256Z,1509051343.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:43.657Z,1509051343.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:44.036Z,1509051344.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:44.443Z,1509051344.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:44.846Z,1509051344.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:45.250Z,1509051345.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:45.659Z,1509051345.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:46.057Z,1509051346.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:46.436Z,1509051346.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:46.847Z,1509051346.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:47.249Z,1509051347.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:47.652Z,1509051347.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:48.044Z,1509051348.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:48.449Z,1509051348.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:48.841Z,1509051348.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:49.257Z,1509051349.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:49.679Z,1509051349.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:50.079Z,1509051350.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:50.454Z,1509051350.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:50.885Z,1509051350.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:51.250Z,1509051351.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:51.673Z,1509051351.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:52.078Z,1509051352.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:52.444Z,1509051352.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:52.870Z,1509051352.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:53.252Z,1509051353.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:53.651Z,1509051353.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:54.053Z,1509051354.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:54.464Z,1509051354.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:54.857Z,1509051354.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:55.245Z,1509051355.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:55.653Z,1509051355.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:56.049Z,1509051356.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:56.455Z,1509051356.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:56.856Z,1509051356.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:57.282Z,1509051357.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:57.643Z,1509051357.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:58.040Z,1509051358.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:58.446Z,1509051358.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:58.843Z,1509051358.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:59.261Z,1509051359.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:55:59.656Z,1509051359.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:00.037Z,1509051360.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:00.439Z,1509051360.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:00.842Z,1509051360.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:01.243Z,1509051361.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:01.667Z,1509051361.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:02.048Z,1509051362.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:02.446Z,1509051362.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:02.868Z,1509051362.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:03.263Z,1509051363.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:03.602Z,1509051363.602 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:56:03.669Z,1509051363.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:04.066Z,1509051364.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:04.454Z,1509051364.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:04.851Z,1509051364.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:05.275Z,1509051365.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:05.762Z,1509051365.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:06.214Z,1509051366.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:06.590Z,1509051366.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:07.023Z,1509051367.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:07.354Z,1509051367.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:07.773Z,1509051367.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:08.186Z,1509051368.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:08.549Z,1509051368.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:09.018Z,1509051369.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:09.353Z,1509051369.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:09.763Z,1509051369.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:10.178Z,1509051370.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:10.536Z,1509051370.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:11.017Z,1509051371.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:11.348Z,1509051371.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:11.766Z,1509051371.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:12.185Z,1509051372.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:12.542Z,1509051372.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:13.031Z,1509051373.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:13.372Z,1509051373.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:13.755Z,1509051373.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:14.188Z,1509051374.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:14.546Z,1509051374.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:15.025Z,1509051375.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:15.381Z,1509051375.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:15.744Z,1509051375.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:16.180Z,1509051376.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:16.550Z,1509051376.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:17.045Z,1509051377.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:17.354Z,1509051377.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:17.762Z,1509051377.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:18.190Z,1509051378.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:18.561Z,1509051378.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:19.041Z,1509051379.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:19.350Z,1509051379.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:19.796Z,1509051379.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:20.149Z,1509051380.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:20.579Z,1509051380.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:21.060Z,1509051381.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:21.393Z,1509051381.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:21.753Z,1509051381.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:22.190Z,1509051382.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:22.564Z,1509051382.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:22.937Z,1509051382.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:23.365Z,1509051383.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:23.735Z,1509051383.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:24.185Z,1509051384.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:24.540Z,1509051384.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:25.069Z,1509051385.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:25.386Z,1509051385.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:25.741Z,1509051385.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:26.183Z,1509051386.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:26.556Z,1509051386.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:27.012Z,1509051387.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:27.371Z,1509051387.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:27.754Z,1509051387.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:28.195Z,1509051388.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:28.566Z,1509051388.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:28.000Z,1509051389.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:29.345Z,1509051389.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:29.757Z,1509051389.757 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:29.757Z,1509051389.757 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 23
2017-10-26T20:56:29.757Z,1509051389.757 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:56:29.787Z,1509051389.787 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:29.787Z,1509051389.787 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 23
2017-10-26T20:56:29.787Z,1509051389.787 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:56:29.888Z,1509051389.888 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:56:29.888Z,1509051389.888 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:56:30.265Z,1509051390.265 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:56:30.265Z,1509051390.265 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 23
2017-10-26T20:56:30.265Z,1509051390.265 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:56:30.265Z,1509051390.265 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 23
2017-10-26T20:56:30.540Z,1509051390.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:56:30.541Z,1509051390.541 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:56:30.541Z,1509051390.541 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:56:30.554Z,1509051390.554 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:56:30.560Z,1509051390.560 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:56:30.560Z,1509051390.560 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:56:31.016Z,1509051391.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:31.355Z,1509051391.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:31.745Z,1509051391.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:32.204Z,1509051392.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:32.551Z,1509051392.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:33.056Z,1509051393.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:33.351Z,1509051393.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:33.775Z,1509051393.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:34.178Z,1509051394.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:34.585Z,1509051394.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:35.043Z,1509051395.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:35.369Z,1509051395.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:35.743Z,1509051395.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:36.289Z,1509051396.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:36.655Z,1509051396.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:37.100Z,1509051397.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:37.459Z,1509051397.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:37.863Z,1509051397.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:38.268Z,1509051398.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:38.666Z,1509051398.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:39.095Z,1509051399.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:39.459Z,1509051399.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:39.854Z,1509051399.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:40.256Z,1509051400.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:40.670Z,1509051400.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:41.140Z,1509051401.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:41.455Z,1509051401.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:41.856Z,1509051401.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:42.285Z,1509051402.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:42.661Z,1509051402.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:43.178Z,1509051403.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:43.468Z,1509051403.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:43.855Z,1509051403.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:44.256Z,1509051404.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:44.670Z,1509051404.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:45.065Z,1509051405.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:45.461Z,1509051405.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:45.891Z,1509051405.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:46.260Z,1509051406.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:46.663Z,1509051406.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:47.092Z,1509051407.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:47.470Z,1509051407.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:47.899Z,1509051407.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:48.262Z,1509051408.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:48.707Z,1509051408.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:49.075Z,1509051409.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:49.468Z,1509051409.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:49.867Z,1509051409.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:50.265Z,1509051410.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:50.656Z,1509051410.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:51.087Z,1509051411.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:51.463Z,1509051411.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:51.857Z,1509051411.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:52.260Z,1509051412.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:52.659Z,1509051412.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:53.089Z,1509051413.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:53.482Z,1509051413.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:53.853Z,1509051413.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:54.250Z,1509051414.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:54.673Z,1509051414.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:55.087Z,1509051415.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:55.465Z,1509051415.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:55.870Z,1509051415.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:56.259Z,1509051416.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:56.667Z,1509051416.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:57.201Z,1509051417.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:57.468Z,1509051417.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:57.861Z,1509051417.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:58.259Z,1509051418.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:58.779Z,1509051418.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:59.211Z,1509051419.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:56:59.575Z,1509051419.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:00.024Z,1509051420.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:00.384Z,1509051420.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:00.788Z,1509051420.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:01.271Z,1509051421.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:01.579Z,1509051421.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:01.995Z,1509051421.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:02.427Z,1509051422.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:02.836Z,1509051422.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:03.225Z,1509051423.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:03.681Z,1509051423.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:03.932Z,1509051423.932 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:57:03.994Z,1509051423.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:04.390Z,1509051424.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:04.822Z,1509051424.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:05.201Z,1509051425.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:05.582Z,1509051425.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:05.979Z,1509051425.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:06.377Z,1509051426.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:06.777Z,1509051426.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:07.202Z,1509051427.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:07.581Z,1509051427.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:07.983Z,1509051427.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:08.380Z,1509051428.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:08.781Z,1509051428.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:09.205Z,1509051429.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:09.578Z,1509051429.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:09.978Z,1509051429.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:10.540Z,1509051430.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:10.944Z,1509051430.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:11.337Z,1509051431.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:11.744Z,1509051431.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:12.192Z,1509051432.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:12.547Z,1509051432.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:12.957Z,1509051432.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:13.410Z,1509051433.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:13.733Z,1509051433.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:14.177Z,1509051434.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:14.594Z,1509051434.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:14.947Z,1509051434.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:15.338Z,1509051435.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:15.804Z,1509051435.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:16.184Z,1509051436.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:16.539Z,1509051436.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:16.988Z,1509051436.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:17.355Z,1509051437.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:17.784Z,1509051437.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:18.205Z,1509051438.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:18.537Z,1509051438.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:19.026Z,1509051439.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:19.346Z,1509051439.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:19.732Z,1509051439.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:20.166Z,1509051440.166 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:20.177Z,1509051440.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:20.561Z,1509051440.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:20.578Z,1509051440.578 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:20.933Z,1509051440.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:21.355Z,1509051441.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:21.371Z,1509051441.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:21.746Z,1509051441.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:21.775Z,1509051441.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:22.196Z,1509051442.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:22.553Z,1509051442.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:22.569Z,1509051442.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:23.021Z,1509051443.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:23.369Z,1509051443.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:23.370Z,1509051443.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:23.733Z,1509051443.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:23.774Z,1509051443.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:24.168Z,1509051444.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:24.544Z,1509051444.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:24.570Z,1509051444.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:24.983Z,1509051444.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:25.352Z,1509051445.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:25.365Z,1509051445.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:25.752Z,1509051445.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:25.773Z,1509051445.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:26.190Z,1509051446.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:26.536Z,1509051446.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:26.571Z,1509051446.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:26.939Z,1509051446.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:27.360Z,1509051447.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:27.370Z,1509051447.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:27.748Z,1509051447.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:27.793Z,1509051447.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:28.178Z,1509051448.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:28.536Z,1509051448.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:28.937Z,1509051448.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:29.385Z,1509051449.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:29.472Z,1509051449.472 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:29.743Z,1509051449.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:30.187Z,1509051450.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:30.269Z,1509051450.269 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:30.600Z,1509051450.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:30.674Z,1509051450.674 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:31.005Z,1509051451.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:31.376Z,1509051451.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:31.427Z,1509051451.427 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:31.741Z,1509051451.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:32.196Z,1509051452.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:32.224Z,1509051452.224 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:32.583Z,1509051452.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:32.628Z,1509051452.628 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:33.043Z,1509051453.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:33.353Z,1509051453.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:33.422Z,1509051453.422 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:33.749Z,1509051453.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:33.826Z,1509051453.826 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:34.185Z,1509051454.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:34.541Z,1509051454.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:34.576Z,1509051454.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:34.938Z,1509051454.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:35.356Z,1509051455.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:35.369Z,1509051455.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:35.757Z,1509051455.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:35.777Z,1509051455.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:36.132Z,1509051456.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:36.539Z,1509051456.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:36.570Z,1509051456.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:37.009Z,1509051457.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:37.370Z,1509051457.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:37.375Z,1509051457.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:37.750Z,1509051457.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:37.772Z,1509051457.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:38.144Z,1509051458.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:38.543Z,1509051458.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:38.566Z,1509051458.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:39.008Z,1509051459.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:39.367Z,1509051459.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:39.590Z,1509051459.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:39.771Z,1509051459.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:39.998Z,1509051459.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:40.403Z,1509051460.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:40.570Z,1509051460.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:40.794Z,1509051460.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:41.203Z,1509051461.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:41.366Z,1509051461.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:41.602Z,1509051461.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:41.773Z,1509051461.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:42.004Z,1509051462.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:42.406Z,1509051462.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:42.576Z,1509051462.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:42.796Z,1509051462.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:43.244Z,1509051463.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:43.375Z,1509051463.375 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:43.604Z,1509051463.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:43.782Z,1509051463.782 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:43.987Z,1509051463.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:44.391Z,1509051464.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:44.580Z,1509051464.580 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:44.851Z,1509051464.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:45.218Z,1509051465.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:45.372Z,1509051465.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:45.676Z,1509051465.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:45.777Z,1509051465.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:46.022Z,1509051466.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:46.446Z,1509051466.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:46.573Z,1509051466.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:46.832Z,1509051466.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:47.211Z,1509051467.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:47.371Z,1509051467.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:47.612Z,1509051467.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:47.776Z,1509051467.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:47.997Z,1509051467.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:48.403Z,1509051468.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:48.791Z,1509051468.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:49.221Z,1509051469.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:49.616Z,1509051469.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:50.030Z,1509051470.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:50.392Z,1509051470.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:50.573Z,1509051470.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:50.821Z,1509051470.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:51.225Z,1509051471.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:51.376Z,1509051471.376 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:51.607Z,1509051471.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:51.782Z,1509051471.782 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:52.034Z,1509051472.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:52.393Z,1509051472.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:52.576Z,1509051472.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:52.794Z,1509051472.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:53.227Z,1509051473.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:53.377Z,1509051473.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:53.596Z,1509051473.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:53.781Z,1509051473.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:53.990Z,1509051473.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:54.389Z,1509051474.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:54.582Z,1509051474.582 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:54.797Z,1509051474.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:55.206Z,1509051475.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:55.376Z,1509051475.376 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:55.598Z,1509051475.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:55.783Z,1509051475.783 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:55.981Z,1509051475.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:56.394Z,1509051476.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:56.577Z,1509051476.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:56.790Z,1509051476.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:57.206Z,1509051477.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:57.375Z,1509051477.375 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:57.594Z,1509051477.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:57.780Z,1509051477.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:58.018Z,1509051478.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:58.394Z,1509051478.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:58.572Z,1509051478.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:58.827Z,1509051478.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:59.211Z,1509051479.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:59.372Z,1509051479.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:57:59.617Z,1509051479.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:57:59.779Z,1509051479.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:00.021Z,1509051480.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:00.427Z,1509051480.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:00.838Z,1509051480.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:01.405Z,1509051481.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:01.799Z,1509051481.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:02.205Z,1509051482.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:02.604Z,1509051482.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:02.000Z,1509051483.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:03.427Z,1509051483.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:03.812Z,1509051483.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:04.130Z,1509051484.130 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:58:04.217Z,1509051484.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:04.596Z,1509051484.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:04.991Z,1509051484.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:05.394Z,1509051485.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:05.793Z,1509051485.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:06.080Z,1509051486.080 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:06.209Z,1509051486.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:06.586Z,1509051486.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:06.878Z,1509051486.878 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:07.011Z,1509051487.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:07.402Z,1509051487.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:07.609Z,1509051487.609 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:07.786Z,1509051487.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:08.229Z,1509051488.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:08.576Z,1509051488.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:08.603Z,1509051488.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:09.051Z,1509051489.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:09.370Z,1509051489.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:09.395Z,1509051489.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:09.774Z,1509051489.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:09.787Z,1509051489.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:10.221Z,1509051490.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:10.567Z,1509051490.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:10.592Z,1509051490.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:11.046Z,1509051491.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:11.368Z,1509051491.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:11.419Z,1509051491.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:11.773Z,1509051491.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:11.816Z,1509051491.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:12.207Z,1509051492.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:12.571Z,1509051492.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:12.617Z,1509051492.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:13.060Z,1509051493.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:13.368Z,1509051493.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:13.666Z,1509051493.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:13.773Z,1509051493.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:14.037Z,1509051494.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:14.466Z,1509051494.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:14.569Z,1509051494.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:14.856Z,1509051494.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:15.241Z,1509051495.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:15.372Z,1509051495.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:15.622Z,1509051495.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:15.785Z,1509051495.785 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:16.020Z,1509051496.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:16.424Z,1509051496.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:16.577Z,1509051496.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:16.816Z,1509051496.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:17.229Z,1509051497.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:17.370Z,1509051497.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:17.625Z,1509051497.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:17.775Z,1509051497.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:18.054Z,1509051498.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:18.414Z,1509051498.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:18.569Z,1509051498.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:18.817Z,1509051498.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:19.240Z,1509051499.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:19.365Z,1509051499.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:19.679Z,1509051499.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:19.770Z,1509051499.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:20.031Z,1509051500.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:20.421Z,1509051500.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:20.565Z,1509051500.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:20.826Z,1509051500.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:21.240Z,1509051501.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:21.364Z,1509051501.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:21.630Z,1509051501.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:21.768Z,1509051501.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:22.017Z,1509051502.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:22.426Z,1509051502.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:22.566Z,1509051502.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:22.833Z,1509051502.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:23.253Z,1509051503.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:23.363Z,1509051503.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:23.659Z,1509051503.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:23.770Z,1509051503.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:24.022Z,1509051504.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:24.425Z,1509051504.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:24.565Z,1509051504.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:24.861Z,1509051504.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:25.310Z,1509051505.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:25.364Z,1509051505.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:25.627Z,1509051505.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:25.775Z,1509051505.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:26.027Z,1509051506.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:26.430Z,1509051506.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:26.568Z,1509051506.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:26.851Z,1509051506.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:26.975Z,1509051506.975 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:27.253Z,1509051507.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:27.443Z,1509051507.443 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:27.633Z,1509051507.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:28.020Z,1509051508.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:28.239Z,1509051508.239 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:28.417Z,1509051508.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:28.643Z,1509051508.643 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:28.826Z,1509051508.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:29.245Z,1509051509.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:29.437Z,1509051509.437 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:29.618Z,1509051509.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:29.841Z,1509051509.841 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:30.081Z,1509051510.081 [BPC1](ERROR): Failed to receive battery data
2017-10-26T20:58:30.081Z,1509051510.081 [BPC1] Communications Fault, FailCount= 1
2017-10-26T20:58:30.081Z,1509051510.081 [BPC1](ERROR): Communications Fault
2017-10-26T20:58:30.118Z,1509051510.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:30.249Z,1509051510.249 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T20:58:30.443Z,1509051510.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:30.578Z,1509051510.578 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:30.820Z,1509051510.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:31.233Z,1509051511.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:31.294Z,1509051511.294 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:58:31.294Z,1509051511.294 [BPC1] No Fault, FailCount= 1
2017-10-26T20:58:31.373Z,1509051511.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:31.694Z,1509051511.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:31.780Z,1509051511.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:32.024Z,1509051512.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:32.513Z,1509051512.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:32.575Z,1509051512.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:32.932Z,1509051512.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:33.325Z,1509051513.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:33.371Z,1509051513.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:33.711Z,1509051513.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:33.775Z,1509051513.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:34.116Z,1509051514.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:34.520Z,1509051514.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:34.568Z,1509051514.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:34.988Z,1509051514.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:35.338Z,1509051515.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:35.366Z,1509051515.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:35.703Z,1509051515.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:35.770Z,1509051515.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:36.113Z,1509051516.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:36.522Z,1509051516.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:36.566Z,1509051516.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:36.919Z,1509051516.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:37.328Z,1509051517.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:37.365Z,1509051517.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:37.716Z,1509051517.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:37.771Z,1509051517.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:38.107Z,1509051518.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:38.512Z,1509051518.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:38.571Z,1509051518.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:38.912Z,1509051518.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:39.309Z,1509051519.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:39.369Z,1509051519.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:39.715Z,1509051519.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:39.777Z,1509051519.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:40.115Z,1509051520.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:40.515Z,1509051520.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:40.574Z,1509051520.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:40.995Z,1509051520.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:41.317Z,1509051521.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:41.373Z,1509051521.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:41.726Z,1509051521.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:41.776Z,1509051521.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:42.123Z,1509051522.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:42.541Z,1509051522.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:42.570Z,1509051522.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:42.922Z,1509051522.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:42.980Z,1509051522.980 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:43.312Z,1509051523.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:43.458Z,1509051523.458 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:43.713Z,1509051523.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:44.122Z,1509051524.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:44.256Z,1509051524.256 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:44.526Z,1509051524.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:44.660Z,1509051524.660 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:44.936Z,1509051524.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:45.327Z,1509051525.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:45.453Z,1509051525.453 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:45.707Z,1509051525.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:45.858Z,1509051525.858 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:46.189Z,1509051526.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:46.509Z,1509051526.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:46.587Z,1509051526.587 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:47.010Z,1509051527.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:47.346Z,1509051527.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:47.385Z,1509051527.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:47.721Z,1509051527.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:47.789Z,1509051527.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:48.119Z,1509051528.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:48.520Z,1509051528.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:48.579Z,1509051528.579 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:48.999Z,1509051528.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:49.313Z,1509051529.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:49.376Z,1509051529.376 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:49.717Z,1509051529.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:49.780Z,1509051529.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:50.117Z,1509051530.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:50.512Z,1509051530.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:50.576Z,1509051530.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:50.960Z,1509051530.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:51.309Z,1509051531.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:51.371Z,1509051531.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:51.726Z,1509051531.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:51.775Z,1509051531.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:52.120Z,1509051532.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:52.527Z,1509051532.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:52.570Z,1509051532.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:52.929Z,1509051532.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:53.309Z,1509051533.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:53.370Z,1509051533.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:53.734Z,1509051533.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:53.777Z,1509051533.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:54.132Z,1509051534.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:54.504Z,1509051534.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:54.572Z,1509051534.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:54.910Z,1509051534.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:55.323Z,1509051535.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:55.369Z,1509051535.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:55.724Z,1509051535.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:55.778Z,1509051535.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:56.103Z,1509051536.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:56.507Z,1509051536.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:56.571Z,1509051536.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:56.908Z,1509051536.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:57.313Z,1509051537.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:57.370Z,1509051537.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:57.723Z,1509051537.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:57.773Z,1509051537.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:58.139Z,1509051538.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:58.508Z,1509051538.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:58.566Z,1509051538.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:58.915Z,1509051538.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:59.367Z,1509051539.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:58:59.381Z,1509051539.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:59.709Z,1509051539.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:58:59.772Z,1509051539.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:00.131Z,1509051540.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:00.252Z,1509051540.252 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:00.507Z,1509051540.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:00.964Z,1509051540.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:01.054Z,1509051541.054 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:01.315Z,1509051541.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:01.530Z,1509051541.530 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:01.730Z,1509051541.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:02.126Z,1509051542.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:02.328Z,1509051542.328 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:02.515Z,1509051542.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:02.936Z,1509051542.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:03.125Z,1509051543.125 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:03.377Z,1509051543.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:03.582Z,1509051543.582 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:03.714Z,1509051543.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:04.120Z,1509051544.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:04.375Z,1509051544.375 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:04.475Z,1509051544.475 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T20:59:04.529Z,1509051544.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:04.933Z,1509051544.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:05.176Z,1509051545.176 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:05.320Z,1509051545.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:05.581Z,1509051545.581 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:05.742Z,1509051545.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:06.108Z,1509051546.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:06.534Z,1509051546.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:06.577Z,1509051546.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:06.922Z,1509051546.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:07.321Z,1509051547.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:07.372Z,1509051547.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:07.748Z,1509051547.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:08.116Z,1509051548.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:08.133Z,1509051548.133 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:08.556Z,1509051548.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:08.932Z,1509051548.932 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:08.985Z,1509051548.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:09.311Z,1509051549.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:09.467Z,1509051549.467 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:09.718Z,1509051549.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:10.124Z,1509051550.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:10.264Z,1509051550.264 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:10.518Z,1509051550.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:10.668Z,1509051550.668 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:10.913Z,1509051550.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:11.310Z,1509051551.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:11.462Z,1509051551.462 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:11.714Z,1509051551.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:11.866Z,1509051551.866 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:12.124Z,1509051552.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:12.517Z,1509051552.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:12.575Z,1509051552.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:12.917Z,1509051552.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:13.370Z,1509051553.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:13.503Z,1509051553.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:13.773Z,1509051553.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:13.900Z,1509051553.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:14.268Z,1509051554.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:14.566Z,1509051554.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:14.701Z,1509051554.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:15.082Z,1509051555.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:15.368Z,1509051555.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:15.516Z,1509051555.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:15.772Z,1509051555.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:15.913Z,1509051555.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:16.272Z,1509051556.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:16.568Z,1509051556.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:16.678Z,1509051556.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:17.092Z,1509051557.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:17.363Z,1509051557.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:17.482Z,1509051557.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:17.768Z,1509051557.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:17.876Z,1509051557.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:18.266Z,1509051558.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:18.565Z,1509051558.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:18.666Z,1509051558.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:19.107Z,1509051559.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:19.362Z,1509051559.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:19.468Z,1509051559.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:19.769Z,1509051559.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:19.869Z,1509051559.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:20.279Z,1509051560.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:20.564Z,1509051560.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:20.674Z,1509051560.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:21.086Z,1509051561.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:21.363Z,1509051561.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:21.475Z,1509051561.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:21.770Z,1509051561.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:21.861Z,1509051561.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:22.277Z,1509051562.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:22.568Z,1509051562.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:22.672Z,1509051562.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:23.072Z,1509051563.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:23.368Z,1509051563.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:23.478Z,1509051563.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:23.773Z,1509051563.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:23.868Z,1509051563.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:24.286Z,1509051564.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:24.568Z,1509051564.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:24.673Z,1509051564.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:25.077Z,1509051565.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:25.363Z,1509051565.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:25.477Z,1509051565.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:25.768Z,1509051565.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:25.867Z,1509051565.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:26.300Z,1509051566.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:26.565Z,1509051566.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:26.668Z,1509051566.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:27.085Z,1509051567.085 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T20:59:27.085Z,1509051567.085 [BPC1] Data Fault, FailCount= 1
2017-10-26T20:59:27.086Z,1509051567.086 [BPC1](ERROR): Data Fault
2017-10-26T20:59:27.099Z,1509051567.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:27.363Z,1509051567.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:27.640Z,1509051567.640 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T20:59:27.712Z,1509051567.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:27.768Z,1509051567.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:28.113Z,1509051568.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:28.504Z,1509051568.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:28.565Z,1509051568.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:28.574Z,1509051568.574 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T20:59:28.574Z,1509051568.574 [BPC1] No Fault, FailCount= 1
2017-10-26T20:59:29.010Z,1509051569.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:29.330Z,1509051569.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:29.363Z,1509051569.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:29.740Z,1509051569.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:29.774Z,1509051569.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:30.108Z,1509051570.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:30.510Z,1509051570.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:30.574Z,1509051570.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:30.909Z,1509051570.909 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:30.909Z,1509051570.909 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 24
2017-10-26T20:59:30.909Z,1509051570.909 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T20:59:30.913Z,1509051570.913 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:30.914Z,1509051570.914 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 24
2017-10-26T20:59:30.914Z,1509051570.914 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T20:59:30.933Z,1509051570.933 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T20:59:30.933Z,1509051570.933 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T20:59:30.982Z,1509051570.982 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:31.381Z,1509051571.381 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T20:59:31.382Z,1509051571.382 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 24
2017-10-26T20:59:31.382Z,1509051571.382 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T20:59:31.382Z,1509051571.382 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 24
2017-10-26T20:59:31.465Z,1509051571.465 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:31.701Z,1509051571.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T20:59:31.702Z,1509051571.702 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:59:31.702Z,1509051571.702 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:59:31.717Z,1509051571.717 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T20:59:31.717Z,1509051571.717 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T20:59:31.718Z,1509051571.718 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T20:59:32.101Z,1509051572.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:32.262Z,1509051572.262 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:32.507Z,1509051572.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:32.667Z,1509051572.667 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:32.971Z,1509051572.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:33.307Z,1509051573.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:33.428Z,1509051573.428 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:33.712Z,1509051573.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:34.099Z,1509051574.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:34.225Z,1509051574.225 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:34.502Z,1509051574.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:34.630Z,1509051574.630 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:34.901Z,1509051574.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:35.309Z,1509051575.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:35.423Z,1509051575.423 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:35.709Z,1509051575.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:35.828Z,1509051575.828 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:36.111Z,1509051576.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:36.519Z,1509051576.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:36.573Z,1509051576.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:36.914Z,1509051576.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:37.295Z,1509051577.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:37.368Z,1509051577.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:37.699Z,1509051577.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:37.775Z,1509051577.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:38.110Z,1509051578.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:38.514Z,1509051578.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:38.568Z,1509051578.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:38.909Z,1509051578.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:39.319Z,1509051579.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:39.373Z,1509051579.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:39.693Z,1509051579.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:39.778Z,1509051579.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:40.119Z,1509051580.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:40.532Z,1509051580.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:40.575Z,1509051580.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:40.906Z,1509051580.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:41.306Z,1509051581.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:41.372Z,1509051581.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:41.739Z,1509051581.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:41.779Z,1509051581.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:42.118Z,1509051582.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:42.547Z,1509051582.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:42.575Z,1509051582.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:42.905Z,1509051582.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:43.330Z,1509051583.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:43.386Z,1509051583.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:43.724Z,1509051583.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:43.796Z,1509051583.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:44.176Z,1509051584.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:44.521Z,1509051584.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:44.594Z,1509051584.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:44.912Z,1509051584.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:45.324Z,1509051585.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:45.386Z,1509051585.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:45.704Z,1509051585.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:45.791Z,1509051585.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:46.102Z,1509051586.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:46.506Z,1509051586.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:46.579Z,1509051586.579 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:46.908Z,1509051586.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:47.371Z,1509051587.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:47.374Z,1509051587.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:47.725Z,1509051587.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:47.806Z,1509051587.806 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:48.111Z,1509051588.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:48.514Z,1509051588.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:48.579Z,1509051588.579 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:48.902Z,1509051588.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:49.306Z,1509051589.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:49.373Z,1509051589.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:49.777Z,1509051589.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:50.111Z,1509051590.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:50.151Z,1509051590.151 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:50.527Z,1509051590.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:50.575Z,1509051590.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:50.908Z,1509051590.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:51.310Z,1509051591.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:51.368Z,1509051591.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:51.743Z,1509051591.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:52.105Z,1509051592.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:52.163Z,1509051592.163 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:52.500Z,1509051592.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:52.574Z,1509051592.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:52.903Z,1509051592.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:53.304Z,1509051593.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:53.369Z,1509051593.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:53.705Z,1509051593.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:53.777Z,1509051593.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:54.116Z,1509051594.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:54.514Z,1509051594.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:54.570Z,1509051594.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:54.896Z,1509051594.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:55.301Z,1509051595.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:55.370Z,1509051595.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:55.774Z,1509051595.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:55.913Z,1509051595.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:56.305Z,1509051596.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:56.569Z,1509051596.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:56.662Z,1509051596.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:57.095Z,1509051597.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:57.365Z,1509051597.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:57.507Z,1509051597.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:57.771Z,1509051597.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:57.862Z,1509051597.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:58.294Z,1509051598.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:58.563Z,1509051598.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:58.694Z,1509051598.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:59.114Z,1509051599.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:59.360Z,1509051599.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:59.474Z,1509051599.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T20:59:59.767Z,1509051599.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T20:59:59.854Z,1509051599.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:00.264Z,1509051600.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:00.562Z,1509051600.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:00.681Z,1509051600.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:01.068Z,1509051601.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:01.361Z,1509051601.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:01.460Z,1509051601.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:01.776Z,1509051601.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:01.856Z,1509051601.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:02.262Z,1509051602.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:02.576Z,1509051602.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:02.657Z,1509051602.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:03.067Z,1509051603.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:03.370Z,1509051603.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:03.464Z,1509051603.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:03.858Z,1509051603.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:04.079Z,1509051604.079 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:04.257Z,1509051604.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:04.584Z,1509051604.584 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:04.670Z,1509051604.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:05.013Z,1509051605.013 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:00:05.094Z,1509051605.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:05.377Z,1509051605.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:05.464Z,1509051605.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:05.864Z,1509051605.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:06.075Z,1509051606.075 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:06.277Z,1509051606.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:06.575Z,1509051606.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:06.672Z,1509051606.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:07.093Z,1509051607.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:07.374Z,1509051607.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:07.459Z,1509051607.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:07.781Z,1509051607.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:07.892Z,1509051607.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:08.259Z,1509051608.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:08.574Z,1509051608.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:08.664Z,1509051608.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:09.112Z,1509051609.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:09.369Z,1509051609.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:09.463Z,1509051609.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:09.772Z,1509051609.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:09.870Z,1509051609.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:10.253Z,1509051610.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:10.565Z,1509051610.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:10.712Z,1509051610.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:11.079Z,1509051611.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:11.367Z,1509051611.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:11.501Z,1509051611.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:11.771Z,1509051611.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:11.856Z,1509051611.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:12.295Z,1509051612.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:12.567Z,1509051612.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:12.695Z,1509051612.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:13.216Z,1509051613.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:13.370Z,1509051613.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:13.458Z,1509051613.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:13.776Z,1509051613.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:13.857Z,1509051613.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:14.265Z,1509051614.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:14.572Z,1509051614.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:14.657Z,1509051614.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:15.063Z,1509051615.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:15.374Z,1509051615.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:15.463Z,1509051615.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:15.781Z,1509051615.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:15.848Z,1509051615.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:16.272Z,1509051616.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:16.575Z,1509051616.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:16.656Z,1509051616.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:17.055Z,1509051617.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:17.370Z,1509051617.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:17.462Z,1509051617.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:17.863Z,1509051617.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:18.073Z,1509051618.073 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:18.277Z,1509051618.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:18.576Z,1509051618.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:18.670Z,1509051618.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:19.060Z,1509051619.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:19.371Z,1509051619.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:19.462Z,1509051619.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:19.846Z,1509051619.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:20.088Z,1509051620.088 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:20.402Z,1509051620.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:20.581Z,1509051620.581 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:20.799Z,1509051620.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:21.211Z,1509051621.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:21.374Z,1509051621.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:21.609Z,1509051621.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:21.780Z,1509051621.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:22.008Z,1509051622.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:22.406Z,1509051622.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:22.572Z,1509051622.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:22.813Z,1509051622.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:23.230Z,1509051623.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:23.370Z,1509051623.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:23.644Z,1509051623.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:23.778Z,1509051623.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:24.016Z,1509051624.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:24.409Z,1509051624.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:24.575Z,1509051624.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:24.853Z,1509051624.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:25.218Z,1509051625.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:25.370Z,1509051625.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:25.660Z,1509051625.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:25.773Z,1509051625.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:26.011Z,1509051626.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:26.429Z,1509051626.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:26.566Z,1509051626.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:26.837Z,1509051626.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:27.219Z,1509051627.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:27.368Z,1509051627.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:27.606Z,1509051627.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:27.772Z,1509051627.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:28.002Z,1509051628.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:28.429Z,1509051628.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:28.570Z,1509051628.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:28.838Z,1509051628.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:29.252Z,1509051629.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:29.371Z,1509051629.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:29.628Z,1509051629.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:29.778Z,1509051629.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:30.022Z,1509051630.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:30.425Z,1509051630.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:30.576Z,1509051630.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:30.829Z,1509051630.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:31.215Z,1509051631.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:31.372Z,1509051631.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:31.612Z,1509051631.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:31.786Z,1509051631.786 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:32.019Z,1509051632.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:32.445Z,1509051632.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:32.575Z,1509051632.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:32.864Z,1509051632.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:33.220Z,1509051633.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:33.370Z,1509051633.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:33.726Z,1509051633.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:33.774Z,1509051633.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:34.131Z,1509051634.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:34.545Z,1509051634.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:34.584Z,1509051634.584 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:34.920Z,1509051634.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:35.326Z,1509051635.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:35.390Z,1509051635.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:35.730Z,1509051635.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:35.797Z,1509051635.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:36.113Z,1509051636.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:36.548Z,1509051636.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:36.590Z,1509051636.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:36.932Z,1509051636.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:37.329Z,1509051637.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:37.389Z,1509051637.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:37.750Z,1509051637.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:37.796Z,1509051637.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:38.115Z,1509051638.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:38.521Z,1509051638.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:38.577Z,1509051638.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:38.924Z,1509051638.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:39.353Z,1509051639.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:39.372Z,1509051639.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:39.733Z,1509051639.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:39.779Z,1509051639.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:40.181Z,1509051640.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:40.519Z,1509051640.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:40.573Z,1509051640.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:41.020Z,1509051641.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:41.363Z,1509051641.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:41.370Z,1509051641.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:41.723Z,1509051641.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:41.774Z,1509051641.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:42.133Z,1509051642.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:42.523Z,1509051642.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:42.567Z,1509051642.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:42.987Z,1509051642.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:43.321Z,1509051643.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:43.368Z,1509051643.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:43.731Z,1509051643.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:43.773Z,1509051643.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:44.127Z,1509051644.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:44.528Z,1509051644.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:44.571Z,1509051644.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:44.929Z,1509051644.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:45.330Z,1509051645.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:45.371Z,1509051645.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:45.779Z,1509051645.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:45.788Z,1509051645.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:46.130Z,1509051646.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:46.520Z,1509051646.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:46.577Z,1509051646.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:47.018Z,1509051647.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:47.331Z,1509051647.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:47.373Z,1509051647.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:47.738Z,1509051647.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:47.783Z,1509051647.783 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:48.129Z,1509051648.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:48.537Z,1509051648.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:48.572Z,1509051648.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:49.002Z,1509051649.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:49.324Z,1509051649.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:49.367Z,1509051649.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:49.729Z,1509051649.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:49.775Z,1509051649.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:50.134Z,1509051650.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:50.529Z,1509051650.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:50.568Z,1509051650.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:50.929Z,1509051650.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:51.373Z,1509051651.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:51.407Z,1509051651.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:51.777Z,1509051651.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:51.821Z,1509051651.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:52.210Z,1509051652.210 [PNI_TCM](ERROR): CRC does not match. Expected:0x2739 got:0x49117
2017-10-26T21:00:52.260Z,1509051652.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:52.571Z,1509051652.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:52.609Z,1509051652.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:53.104Z,1509051653.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:53.372Z,1509051653.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:53.408Z,1509051653.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:53.780Z,1509051653.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:53.783Z,1509051653.783 [PNI_TCM](ERROR): CRC does not match. Expected:0x28112 got:0x58098
2017-10-26T21:00:53.804Z,1509051653.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:54.244Z,1509051654.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:54.579Z,1509051654.579 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:54.601Z,1509051654.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:55.093Z,1509051655.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:55.377Z,1509051655.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:55.426Z,1509051655.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:55.784Z,1509051655.784 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:55.810Z,1509051655.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:56.220Z,1509051656.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:56.577Z,1509051656.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:56.599Z,1509051656.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:57.063Z,1509051657.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:57.371Z,1509051657.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:57.408Z,1509051657.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:57.775Z,1509051657.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:57.807Z,1509051657.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:58.224Z,1509051658.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:58.575Z,1509051658.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:58.602Z,1509051658.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:59.067Z,1509051659.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:59.374Z,1509051659.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:59.408Z,1509051659.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:00:59.778Z,1509051659.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:00:59.812Z,1509051659.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:00.218Z,1509051660.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:00.576Z,1509051660.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:00.596Z,1509051660.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:01.063Z,1509051661.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:01.375Z,1509051661.375 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:01.410Z,1509051661.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:01.781Z,1509051661.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:01.809Z,1509051661.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:02.236Z,1509051662.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:02.574Z,1509051662.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:02.596Z,1509051662.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:03.085Z,1509051663.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:03.368Z,1509051663.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:03.422Z,1509051663.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:03.784Z,1509051663.784 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:03.823Z,1509051663.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:04.216Z,1509051664.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:04.574Z,1509051664.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:04.610Z,1509051664.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:04.942Z,1509051664.942 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:01:05.069Z,1509051665.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:05.369Z,1509051665.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:05.413Z,1509051665.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:05.775Z,1509051665.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:05.804Z,1509051665.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:06.228Z,1509051666.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:06.568Z,1509051666.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:06.627Z,1509051666.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:07.027Z,1509051667.027 [PNI_TCM](ERROR): CRC does not match. Expected:0x25800 got:0x7981
2017-10-26T21:01:07.064Z,1509051667.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:07.370Z,1509051667.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:07.432Z,1509051667.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:07.774Z,1509051667.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:07.808Z,1509051667.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:08.225Z,1509051668.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:08.571Z,1509051668.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:08.626Z,1509051668.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:08.998Z,1509051668.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:09.369Z,1509051669.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:09.437Z,1509051669.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:09.775Z,1509051669.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:09.849Z,1509051669.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:10.231Z,1509051670.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:10.567Z,1509051670.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:10.604Z,1509051670.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:11.017Z,1509051671.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:11.364Z,1509051671.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:11.408Z,1509051671.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:11.770Z,1509051671.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:11.794Z,1509051671.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:12.229Z,1509051672.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:12.563Z,1509051672.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:12.614Z,1509051672.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:12.966Z,1509051672.966 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:13.005Z,1509051673.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:13.401Z,1509051673.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:13.575Z,1509051673.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:13.801Z,1509051673.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:14.249Z,1509051674.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:14.574Z,1509051674.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:14.611Z,1509051674.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:14.979Z,1509051674.979 [PNI_TCM](ERROR): CRC does not match. Expected:0x38166 got:0x1857
2017-10-26T21:01:15.021Z,1509051675.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:15.371Z,1509051675.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:15.406Z,1509051675.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:15.797Z,1509051675.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:16.079Z,1509051676.079 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:16.253Z,1509051676.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:16.606Z,1509051676.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:16.876Z,1509051676.876 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:17.078Z,1509051677.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:17.404Z,1509051677.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:17.465Z,1509051677.465 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:17.806Z,1509051677.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:18.216Z,1509051678.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:18.263Z,1509051678.263 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:18.605Z,1509051678.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:19.038Z,1509051679.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:19.072Z,1509051679.072 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:19.417Z,1509051679.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:19.476Z,1509051679.476 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:19.797Z,1509051679.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:20.206Z,1509051680.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:20.274Z,1509051680.274 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:20.668Z,1509051680.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:20.679Z,1509051680.679 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:21.048Z,1509051681.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:21.438Z,1509051681.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:21.472Z,1509051681.472 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:21.813Z,1509051681.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:21.877Z,1509051681.877 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:22.218Z,1509051682.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:22.589Z,1509051682.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:22.639Z,1509051682.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:23.029Z,1509051683.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:23.383Z,1509051683.383 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:23.461Z,1509051683.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:23.790Z,1509051683.790 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:23.801Z,1509051683.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:24.242Z,1509051684.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:24.580Z,1509051684.580 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:24.602Z,1509051684.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:25.037Z,1509051685.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:25.374Z,1509051685.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:25.431Z,1509051685.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:25.780Z,1509051685.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:25.809Z,1509051685.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:26.220Z,1509051686.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:26.571Z,1509051686.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:26.607Z,1509051686.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:27.061Z,1509051687.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:27.370Z,1509051687.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:27.419Z,1509051687.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:27.777Z,1509051687.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:27.798Z,1509051687.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:28.220Z,1509051688.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:28.574Z,1509051688.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:28.609Z,1509051688.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:29.034Z,1509051689.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:29.370Z,1509051689.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:29.410Z,1509051689.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:29.777Z,1509051689.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:29.813Z,1509051689.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:30.217Z,1509051690.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:30.573Z,1509051690.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:30.609Z,1509051690.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:31.066Z,1509051691.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:31.375Z,1509051691.375 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:31.407Z,1509051691.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:31.781Z,1509051691.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:31.810Z,1509051691.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:32.206Z,1509051692.206 [PNI_TCM](ERROR): CRC does not match. Expected:0x44413 got:0x16344
2017-10-26T21:01:32.235Z,1509051692.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:32.577Z,1509051692.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:32.598Z,1509051692.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:33.062Z,1509051693.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:33.384Z,1509051693.384 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:33.409Z,1509051693.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:33.804Z,1509051693.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:33.819Z,1509051693.819 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:34.229Z,1509051694.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:34.576Z,1509051694.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:34.621Z,1509051694.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:35.095Z,1509051695.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:35.370Z,1509051695.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:35.402Z,1509051695.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:35.778Z,1509051695.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:35.793Z,1509051695.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:36.254Z,1509051696.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:36.575Z,1509051696.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:36.625Z,1509051696.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:37.056Z,1509051697.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:37.372Z,1509051697.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:37.437Z,1509051697.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:37.777Z,1509051697.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:37.847Z,1509051697.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:38.249Z,1509051698.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:38.572Z,1509051698.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:38.617Z,1509051698.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:39.063Z,1509051699.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:39.371Z,1509051699.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:39.422Z,1509051699.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:39.776Z,1509051699.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:39.797Z,1509051699.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:40.212Z,1509051700.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:40.570Z,1509051700.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:40.598Z,1509051700.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:41.044Z,1509051701.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:41.368Z,1509051701.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:41.411Z,1509051701.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:41.774Z,1509051701.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:41.808Z,1509051701.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:42.231Z,1509051702.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:42.572Z,1509051702.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:42.595Z,1509051702.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:43.043Z,1509051703.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:43.381Z,1509051703.381 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:43.421Z,1509051703.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:43.787Z,1509051703.787 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:43.833Z,1509051703.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:44.213Z,1509051704.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:44.607Z,1509051704.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:45.037Z,1509051705.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:45.406Z,1509051705.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:45.461Z,1509051705.461 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:45.811Z,1509051705.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:46.218Z,1509051706.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:46.258Z,1509051706.258 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:46.622Z,1509051706.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:46.663Z,1509051706.663 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:47.041Z,1509051707.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:47.410Z,1509051707.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:47.437Z,1509051707.437 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:47.822Z,1509051707.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:48.233Z,1509051708.233 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:48.408Z,1509051708.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:48.638Z,1509051708.638 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:48.863Z,1509051708.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:49.225Z,1509051709.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:49.431Z,1509051709.431 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:49.597Z,1509051709.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:50.039Z,1509051710.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:50.228Z,1509051710.228 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:50.483Z,1509051710.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:50.633Z,1509051710.633 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:50.848Z,1509051710.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:51.248Z,1509051711.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:51.422Z,1509051711.422 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:51.609Z,1509051711.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:52.041Z,1509051712.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:52.220Z,1509051712.220 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:52.445Z,1509051712.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:52.628Z,1509051712.628 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:52.806Z,1509051712.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:53.223Z,1509051713.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:53.397Z,1509051713.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:53.609Z,1509051713.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:54.019Z,1509051714.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:54.194Z,1509051714.194 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:54.438Z,1509051714.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:54.599Z,1509051714.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:54.807Z,1509051714.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:55.220Z,1509051715.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:55.396Z,1509051715.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:55.635Z,1509051715.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:55.801Z,1509051715.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:56.054Z,1509051716.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:56.406Z,1509051716.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:56.578Z,1509051716.578 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:56.805Z,1509051716.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:57.235Z,1509051717.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:57.371Z,1509051717.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:57.607Z,1509051717.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:57.777Z,1509051717.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:58.018Z,1509051718.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:58.404Z,1509051718.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:58.573Z,1509051718.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:58.806Z,1509051718.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:59.287Z,1509051719.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:59.372Z,1509051719.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:01:59.681Z,1509051719.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:01:59.779Z,1509051719.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:00.092Z,1509051720.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:00.473Z,1509051720.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:00.572Z,1509051720.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:00.879Z,1509051720.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:01.283Z,1509051721.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:01.368Z,1509051721.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:01.681Z,1509051721.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:01.774Z,1509051721.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:02.086Z,1509051722.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:02.480Z,1509051722.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:02.567Z,1509051722.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:02.880Z,1509051722.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:03.300Z,1509051723.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:03.369Z,1509051723.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:03.673Z,1509051723.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:03.773Z,1509051723.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:04.076Z,1509051724.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:04.513Z,1509051724.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:04.571Z,1509051724.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:04.884Z,1509051724.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:05.223Z,1509051725.223 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:02:05.306Z,1509051725.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:05.367Z,1509051725.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:05.674Z,1509051725.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:05.774Z,1509051725.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:06.111Z,1509051726.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:06.501Z,1509051726.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:06.569Z,1509051726.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:06.875Z,1509051726.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:06.976Z,1509051726.976 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:07.293Z,1509051727.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:07.459Z,1509051727.459 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:07.674Z,1509051727.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:08.081Z,1509051728.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:08.256Z,1509051728.256 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:08.491Z,1509051728.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:08.874Z,1509051728.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:09.054Z,1509051729.054 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:09.290Z,1509051729.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:09.458Z,1509051729.458 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:09.678Z,1509051729.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:10.073Z,1509051730.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:10.256Z,1509051730.256 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:10.486Z,1509051730.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:10.660Z,1509051730.660 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:10.880Z,1509051730.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:11.298Z,1509051731.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:11.449Z,1509051731.449 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:11.674Z,1509051731.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:12.076Z,1509051732.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:12.247Z,1509051732.247 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:12.488Z,1509051732.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:12.651Z,1509051732.651 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:12.875Z,1509051732.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:13.291Z,1509051733.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:13.416Z,1509051733.416 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:13.694Z,1509051733.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:14.080Z,1509051734.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:14.213Z,1509051734.213 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:14.470Z,1509051734.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:14.618Z,1509051734.618 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:14.882Z,1509051734.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:15.288Z,1509051735.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:15.411Z,1509051735.411 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:15.681Z,1509051735.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:16.082Z,1509051736.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:16.209Z,1509051736.209 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:16.476Z,1509051736.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:16.613Z,1509051736.613 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:16.861Z,1509051736.861 [BPC1](ERROR): Failed to parse message.
2017-10-26T21:02:16.861Z,1509051736.861 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T21:02:16.861Z,1509051736.861 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:02:16.862Z,1509051736.862 [BPC1](ERROR): Data Fault
2017-10-26T21:02:16.879Z,1509051736.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:17.003Z,1509051737.003 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:02:17.297Z,1509051737.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:17.406Z,1509051737.406 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:17.672Z,1509051737.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:17.811Z,1509051737.811 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:18.073Z,1509051738.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:18.197Z,1509051738.197 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:02:18.197Z,1509051738.197 [BPC1] No Fault, FailCount= 1
2017-10-26T21:02:18.544Z,1509051738.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:18.578Z,1509051738.578 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:18.873Z,1509051738.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:19.309Z,1509051739.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:19.370Z,1509051739.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:19.672Z,1509051739.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:19.774Z,1509051739.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:20.065Z,1509051740.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:20.480Z,1509051740.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:20.579Z,1509051740.579 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:20.880Z,1509051740.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:21.287Z,1509051741.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:21.377Z,1509051741.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:21.683Z,1509051741.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:21.781Z,1509051741.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:22.063Z,1509051742.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:22.477Z,1509051742.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:22.578Z,1509051742.578 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:22.869Z,1509051742.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:23.278Z,1509051743.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:23.377Z,1509051743.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:23.683Z,1509051743.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:23.784Z,1509051743.784 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:24.083Z,1509051744.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:24.493Z,1509051744.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:24.574Z,1509051744.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:24.875Z,1509051744.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:25.276Z,1509051745.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:25.369Z,1509051745.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:25.682Z,1509051745.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:25.776Z,1509051745.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:26.088Z,1509051746.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:26.491Z,1509051746.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:26.585Z,1509051746.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:26.898Z,1509051746.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:27.310Z,1509051747.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:27.378Z,1509051747.378 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:27.679Z,1509051747.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:27.786Z,1509051747.786 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:28.079Z,1509051748.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:28.481Z,1509051748.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:28.580Z,1509051748.580 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:28.887Z,1509051748.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:29.299Z,1509051749.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:29.377Z,1509051749.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:29.674Z,1509051749.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:29.781Z,1509051749.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:30.070Z,1509051750.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:30.485Z,1509051750.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:30.575Z,1509051750.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:30.869Z,1509051750.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:31.326Z,1509051751.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:31.375Z,1509051751.375 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:31.678Z,1509051751.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:31.781Z,1509051751.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:32.280Z,1509051752.280 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:32.280Z,1509051752.280 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 25
2017-10-26T21:02:32.280Z,1509051752.280 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:02:32.285Z,1509051752.285 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:32.285Z,1509051752.285 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 25
2017-10-26T21:02:32.285Z,1509051752.285 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:02:32.394Z,1509051752.394 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:02:32.395Z,1509051752.395 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:02:32.574Z,1509051752.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:32.771Z,1509051752.771 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:02:32.771Z,1509051752.771 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 25
2017-10-26T21:02:32.772Z,1509051752.772 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:02:32.772Z,1509051752.772 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 25
2017-10-26T21:02:33.172Z,1509051753.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:02:33.173Z,1509051753.173 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:02:33.173Z,1509051753.173 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:02:33.184Z,1509051753.184 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:02:33.184Z,1509051753.184 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:02:33.184Z,1509051753.184 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:02:33.368Z,1509051753.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:33.467Z,1509051753.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:33.776Z,1509051753.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:33.886Z,1509051753.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:34.247Z,1509051754.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:34.569Z,1509051754.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:34.678Z,1509051754.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:35.053Z,1509051755.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:35.366Z,1509051755.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:35.493Z,1509051755.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:35.771Z,1509051755.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:35.854Z,1509051755.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:36.262Z,1509051756.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:36.567Z,1509051756.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:36.646Z,1509051756.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:37.040Z,1509051757.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:37.366Z,1509051757.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:37.448Z,1509051757.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:37.851Z,1509051757.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:38.074Z,1509051758.074 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:38.266Z,1509051758.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:38.579Z,1509051758.579 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:38.654Z,1509051758.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:39.054Z,1509051759.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:39.374Z,1509051759.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:39.451Z,1509051759.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:39.864Z,1509051759.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:40.069Z,1509051760.069 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:40.267Z,1509051760.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:40.574Z,1509051760.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:40.656Z,1509051760.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:41.075Z,1509051761.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:41.369Z,1509051761.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:41.478Z,1509051761.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:41.777Z,1509051761.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:41.888Z,1509051761.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:42.251Z,1509051762.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:42.573Z,1509051762.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:42.653Z,1509051762.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:43.067Z,1509051763.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:43.371Z,1509051763.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:43.457Z,1509051763.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:43.775Z,1509051763.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:43.870Z,1509051763.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:44.257Z,1509051764.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:44.570Z,1509051764.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:44.691Z,1509051764.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:45.069Z,1509051765.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:45.366Z,1509051765.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:45.460Z,1509051765.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:45.772Z,1509051765.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:45.879Z,1509051765.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:46.300Z,1509051766.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:46.567Z,1509051766.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:46.659Z,1509051766.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:47.106Z,1509051767.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:47.365Z,1509051767.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:47.456Z,1509051767.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:47.771Z,1509051767.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:47.886Z,1509051767.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:48.288Z,1509051768.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:48.567Z,1509051768.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:48.666Z,1509051768.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:49.086Z,1509051769.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:49.374Z,1509051769.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:49.460Z,1509051769.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:49.776Z,1509051769.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:49.854Z,1509051769.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:50.255Z,1509051770.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:50.571Z,1509051770.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:50.656Z,1509051770.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:50.982Z,1509051770.982 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:51.096Z,1509051771.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:51.460Z,1509051771.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:51.475Z,1509051771.475 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:51.857Z,1509051771.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:52.261Z,1509051772.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:52.272Z,1509051772.272 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:52.643Z,1509051772.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:53.070Z,1509051773.070 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:53.096Z,1509051773.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:53.465Z,1509051773.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:53.486Z,1509051773.486 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:53.857Z,1509051773.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:54.273Z,1509051774.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:54.288Z,1509051774.288 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:54.658Z,1509051774.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:54.693Z,1509051774.693 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:55.063Z,1509051775.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:55.382Z,1509051775.382 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:55.448Z,1509051775.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:56.059Z,1509051776.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:56.179Z,1509051776.179 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:56.427Z,1509051776.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:56.585Z,1509051776.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:56.818Z,1509051776.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:57.223Z,1509051777.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:57.380Z,1509051777.380 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:57.626Z,1509051777.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:57.785Z,1509051777.785 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:58.021Z,1509051778.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:58.406Z,1509051778.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:58.577Z,1509051778.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:58.832Z,1509051778.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:59.236Z,1509051779.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:59.371Z,1509051779.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:02:59.651Z,1509051779.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:02:59.776Z,1509051779.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:00.013Z,1509051780.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:00.499Z,1509051780.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:00.570Z,1509051780.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:00.815Z,1509051780.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:01.285Z,1509051781.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:01.367Z,1509051781.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:01.612Z,1509051781.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:01.774Z,1509051781.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:02.038Z,1509051782.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:02.451Z,1509051782.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:02.568Z,1509051782.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:02.819Z,1509051782.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:03.240Z,1509051783.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:03.366Z,1509051783.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:03.609Z,1509051783.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:03.771Z,1509051783.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:04.009Z,1509051784.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:04.429Z,1509051784.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:04.567Z,1509051784.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:04.815Z,1509051784.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:05.186Z,1509051785.186 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:03:05.266Z,1509051785.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:05.373Z,1509051785.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:05.621Z,1509051785.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:05.777Z,1509051785.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:06.036Z,1509051786.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:06.414Z,1509051786.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:06.577Z,1509051786.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:06.837Z,1509051786.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:07.226Z,1509051787.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:07.372Z,1509051787.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:07.621Z,1509051787.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:07.778Z,1509051787.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:08.018Z,1509051788.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:08.547Z,1509051788.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:08.571Z,1509051788.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:09.056Z,1509051789.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:09.367Z,1509051789.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:09.388Z,1509051789.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:09.749Z,1509051789.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:09.774Z,1509051789.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:10.186Z,1509051790.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:10.561Z,1509051790.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:10.573Z,1509051790.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:11.007Z,1509051791.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:11.351Z,1509051791.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:11.371Z,1509051791.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:11.750Z,1509051791.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:11.779Z,1509051791.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:12.193Z,1509051792.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:12.562Z,1509051792.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:12.572Z,1509051792.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:13.031Z,1509051793.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:13.357Z,1509051793.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:13.367Z,1509051793.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:13.762Z,1509051793.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:13.774Z,1509051793.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:14.193Z,1509051794.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:14.567Z,1509051794.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:14.632Z,1509051794.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:15.037Z,1509051795.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:15.365Z,1509051795.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:15.396Z,1509051795.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:15.769Z,1509051795.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:15.795Z,1509051795.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:16.192Z,1509051796.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:16.569Z,1509051796.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:16.592Z,1509051796.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:17.056Z,1509051797.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:17.376Z,1509051797.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:17.390Z,1509051797.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:17.756Z,1509051797.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:17.796Z,1509051797.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:18.184Z,1509051798.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:18.564Z,1509051798.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:18.577Z,1509051798.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:19.067Z,1509051799.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:19.361Z,1509051799.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:19.377Z,1509051799.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:19.757Z,1509051799.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:19.785Z,1509051799.785 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:20.181Z,1509051800.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:20.545Z,1509051800.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:20.576Z,1509051800.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:21.011Z,1509051801.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:21.359Z,1509051801.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:21.371Z,1509051801.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:21.764Z,1509051801.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:21.774Z,1509051801.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:22.179Z,1509051802.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:22.566Z,1509051802.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:22.567Z,1509051802.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:23.025Z,1509051803.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:23.349Z,1509051803.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:23.369Z,1509051803.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:23.746Z,1509051803.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:23.773Z,1509051803.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:24.183Z,1509051804.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:24.569Z,1509051804.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:24.599Z,1509051804.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:25.043Z,1509051805.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:25.368Z,1509051805.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:25.377Z,1509051805.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:25.753Z,1509051805.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:25.774Z,1509051805.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:26.234Z,1509051806.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:26.566Z,1509051806.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:26.645Z,1509051806.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:27.076Z,1509051807.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:27.363Z,1509051807.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:27.434Z,1509051807.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:27.769Z,1509051807.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:27.849Z,1509051807.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:28.239Z,1509051808.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:28.565Z,1509051808.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:28.671Z,1509051808.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:29.120Z,1509051809.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:29.365Z,1509051809.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:29.469Z,1509051809.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:29.774Z,1509051809.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:29.854Z,1509051809.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:30.246Z,1509051810.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:30.568Z,1509051810.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:30.682Z,1509051810.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:30.973Z,1509051810.973 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:31.136Z,1509051811.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:31.503Z,1509051811.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:31.533Z,1509051811.533 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:31.881Z,1509051811.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:32.238Z,1509051812.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:32.331Z,1509051812.331 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:32.660Z,1509051812.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:32.735Z,1509051812.735 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:33.044Z,1509051813.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:33.444Z,1509051813.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:33.528Z,1509051813.528 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:33.845Z,1509051813.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:33.933Z,1509051813.933 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:34.241Z,1509051814.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:34.578Z,1509051814.578 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:34.632Z,1509051814.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:35.051Z,1509051815.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:35.373Z,1509051815.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:35.454Z,1509051815.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:35.784Z,1509051815.784 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:35.851Z,1509051815.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:36.242Z,1509051816.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:36.573Z,1509051816.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:36.658Z,1509051816.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:37.034Z,1509051817.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:37.368Z,1509051817.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:37.437Z,1509051817.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:37.848Z,1509051817.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:38.079Z,1509051818.079 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:38.264Z,1509051818.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:38.644Z,1509051818.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:38.877Z,1509051818.877 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:39.087Z,1509051819.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:39.456Z,1509051819.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:39.462Z,1509051819.462 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:39.870Z,1509051819.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:40.240Z,1509051820.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:40.259Z,1509051820.259 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:40.640Z,1509051820.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:40.664Z,1509051820.664 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:41.081Z,1509051821.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:41.442Z,1509051821.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:41.457Z,1509051821.457 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:41.857Z,1509051821.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:41.862Z,1509051821.862 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:42.253Z,1509051822.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:42.574Z,1509051822.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:42.648Z,1509051822.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:43.076Z,1509051823.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:43.373Z,1509051823.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:43.451Z,1509051823.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:43.784Z,1509051823.784 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:43.889Z,1509051823.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:44.276Z,1509051824.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:44.573Z,1509051824.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:44.648Z,1509051824.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:45.197Z,1509051825.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:45.369Z,1509051825.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:45.465Z,1509051825.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:45.775Z,1509051825.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:45.874Z,1509051825.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:46.279Z,1509051826.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:46.569Z,1509051826.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:46.642Z,1509051826.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:47.046Z,1509051827.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:47.366Z,1509051827.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:47.443Z,1509051827.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:47.771Z,1509051827.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:47.847Z,1509051827.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:48.250Z,1509051828.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:48.566Z,1509051828.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:48.645Z,1509051828.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:49.061Z,1509051829.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:49.365Z,1509051829.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:49.454Z,1509051829.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:49.770Z,1509051829.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:49.853Z,1509051829.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:50.253Z,1509051830.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:50.567Z,1509051830.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:50.654Z,1509051830.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:51.059Z,1509051831.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:51.364Z,1509051831.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:51.455Z,1509051831.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:51.773Z,1509051831.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:51.848Z,1509051831.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:52.240Z,1509051832.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:52.566Z,1509051832.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:52.651Z,1509051832.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:53.094Z,1509051833.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:53.365Z,1509051833.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:53.442Z,1509051833.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:53.772Z,1509051833.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:53.855Z,1509051833.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:54.251Z,1509051834.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:54.573Z,1509051834.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:54.639Z,1509051834.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:55.040Z,1509051835.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:55.376Z,1509051835.376 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:55.454Z,1509051835.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:55.779Z,1509051835.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:55.855Z,1509051835.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:56.251Z,1509051836.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:56.576Z,1509051836.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:56.648Z,1509051836.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:57.033Z,1509051837.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:57.370Z,1509051837.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:57.455Z,1509051837.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:57.777Z,1509051837.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:57.849Z,1509051837.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:58.273Z,1509051838.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:58.571Z,1509051838.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:58.658Z,1509051838.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:59.084Z,1509051839.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:59.369Z,1509051839.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:59.488Z,1509051839.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:03:59.773Z,1509051839.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:03:59.847Z,1509051839.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:00.292Z,1509051840.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:00.570Z,1509051840.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:00.678Z,1509051840.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:01.054Z,1509051841.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:01.374Z,1509051841.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:01.448Z,1509051841.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:01.814Z,1509051841.814 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:01.858Z,1509051841.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:02.270Z,1509051842.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:02.576Z,1509051842.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:02.649Z,1509051842.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:03.066Z,1509051843.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:03.367Z,1509051843.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:03.463Z,1509051843.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:03.771Z,1509051843.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:03.851Z,1509051843.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:04.259Z,1509051844.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:04.572Z,1509051844.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:04.656Z,1509051844.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:05.046Z,1509051845.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:05.370Z,1509051845.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:05.452Z,1509051845.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:05.777Z,1509051845.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:05.791Z,1509051845.791 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:04:05.849Z,1509051845.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:06.257Z,1509051846.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:06.572Z,1509051846.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:06.665Z,1509051846.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:07.056Z,1509051847.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:07.369Z,1509051847.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:07.444Z,1509051847.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:07.774Z,1509051847.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:07.847Z,1509051847.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:08.247Z,1509051848.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:08.567Z,1509051848.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:08.655Z,1509051848.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:09.054Z,1509051849.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:09.366Z,1509051849.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:09.455Z,1509051849.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:09.773Z,1509051849.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:09.843Z,1509051849.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:10.249Z,1509051850.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:10.570Z,1509051850.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:10.661Z,1509051850.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:11.056Z,1509051851.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:11.372Z,1509051851.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:11.459Z,1509051851.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:11.776Z,1509051851.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:11.838Z,1509051851.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:12.239Z,1509051852.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:12.572Z,1509051852.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:12.648Z,1509051852.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:13.127Z,1509051853.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:13.371Z,1509051853.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:13.457Z,1509051853.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:13.777Z,1509051853.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:13.881Z,1509051853.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:14.238Z,1509051854.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:14.576Z,1509051854.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:14.674Z,1509051854.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:15.083Z,1509051855.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:15.369Z,1509051855.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:15.481Z,1509051855.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:15.778Z,1509051855.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:15.854Z,1509051855.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:16.250Z,1509051856.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:16.579Z,1509051856.579 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:16.650Z,1509051856.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:17.053Z,1509051857.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:17.372Z,1509051857.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:17.456Z,1509051857.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:17.777Z,1509051857.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:17.868Z,1509051857.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:18.265Z,1509051858.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:18.577Z,1509051858.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:18.653Z,1509051858.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:19.041Z,1509051859.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:19.372Z,1509051859.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:19.481Z,1509051859.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:19.776Z,1509051859.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:19.845Z,1509051859.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:20.249Z,1509051860.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:20.571Z,1509051860.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:20.635Z,1509051860.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:20.703Z,1509051860.703 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T21:04:21.119Z,1509051861.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:21.367Z,1509051861.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:21.457Z,1509051861.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:21.773Z,1509051861.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:21.847Z,1509051861.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:22.245Z,1509051862.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:22.569Z,1509051862.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:22.648Z,1509051862.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:23.069Z,1509051863.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:23.366Z,1509051863.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:23.450Z,1509051863.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:23.771Z,1509051863.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:23.850Z,1509051863.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:24.235Z,1509051864.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:24.564Z,1509051864.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:24.684Z,1509051864.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:25.243Z,1509051865.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:25.362Z,1509051865.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:25.670Z,1509051865.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:25.769Z,1509051865.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:26.042Z,1509051866.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:26.442Z,1509051866.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:26.568Z,1509051866.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:26.890Z,1509051866.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:27.274Z,1509051867.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:27.369Z,1509051867.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:27.648Z,1509051867.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:27.772Z,1509051867.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:28.079Z,1509051868.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:28.433Z,1509051868.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:28.571Z,1509051868.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:28.869Z,1509051868.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:29.273Z,1509051869.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:29.370Z,1509051869.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:29.650Z,1509051869.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:29.778Z,1509051869.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:30.044Z,1509051870.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:30.449Z,1509051870.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:30.573Z,1509051870.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:30.847Z,1509051870.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:31.271Z,1509051871.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:31.372Z,1509051871.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:31.642Z,1509051871.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:31.779Z,1509051871.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:32.043Z,1509051872.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:32.443Z,1509051872.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:32.572Z,1509051872.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:32.847Z,1509051872.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:33.236Z,1509051873.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:33.367Z,1509051873.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:33.640Z,1509051873.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:33.774Z,1509051873.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:34.080Z,1509051874.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:34.444Z,1509051874.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:34.567Z,1509051874.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:34.853Z,1509051874.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:35.248Z,1509051875.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:35.368Z,1509051875.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:35.693Z,1509051875.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:35.773Z,1509051875.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:36.045Z,1509051876.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:36.452Z,1509051876.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:36.567Z,1509051876.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:36.875Z,1509051876.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:37.369Z,1509051877.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:37.450Z,1509051877.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:37.773Z,1509051877.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:37.857Z,1509051877.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:38.245Z,1509051878.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:38.569Z,1509051878.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:38.651Z,1509051878.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:39.049Z,1509051879.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:39.367Z,1509051879.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:39.449Z,1509051879.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:39.771Z,1509051879.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:39.851Z,1509051879.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:40.264Z,1509051880.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:40.568Z,1509051880.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:40.663Z,1509051880.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:41.091Z,1509051881.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:41.367Z,1509051881.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:41.480Z,1509051881.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:41.774Z,1509051881.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:41.842Z,1509051881.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:42.275Z,1509051882.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:42.577Z,1509051882.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:42.646Z,1509051882.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:43.099Z,1509051883.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:43.377Z,1509051883.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:43.479Z,1509051883.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:43.784Z,1509051883.784 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:43.838Z,1509051883.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:44.239Z,1509051884.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:44.575Z,1509051884.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:44.637Z,1509051884.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:45.054Z,1509051885.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:45.368Z,1509051885.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:45.443Z,1509051885.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:45.775Z,1509051885.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:45.837Z,1509051885.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:46.238Z,1509051886.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:46.566Z,1509051886.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:46.650Z,1509051886.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:46.972Z,1509051886.972 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:47.113Z,1509051887.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:47.446Z,1509051887.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:47.511Z,1509051887.511 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:47.840Z,1509051887.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:48.241Z,1509051888.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:48.309Z,1509051888.309 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:48.642Z,1509051888.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:48.713Z,1509051888.713 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:49.096Z,1509051889.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:49.448Z,1509051889.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:49.506Z,1509051889.506 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:49.830Z,1509051889.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:49.911Z,1509051889.911 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:50.255Z,1509051890.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:50.574Z,1509051890.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:50.638Z,1509051890.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:51.077Z,1509051891.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:51.369Z,1509051891.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:51.436Z,1509051891.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:51.774Z,1509051891.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:51.852Z,1509051891.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:52.246Z,1509051892.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:52.570Z,1509051892.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:52.667Z,1509051892.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:53.064Z,1509051893.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:53.368Z,1509051893.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:53.469Z,1509051893.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:53.778Z,1509051893.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:53.842Z,1509051893.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:54.243Z,1509051894.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:54.574Z,1509051894.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:54.637Z,1509051894.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:55.058Z,1509051895.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:55.374Z,1509051895.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:55.510Z,1509051895.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:55.780Z,1509051895.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:55.838Z,1509051895.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:56.265Z,1509051896.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:56.573Z,1509051896.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:56.688Z,1509051896.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:57.044Z,1509051897.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:57.369Z,1509051897.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:57.484Z,1509051897.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:57.775Z,1509051897.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:57.868Z,1509051897.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:58.278Z,1509051898.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:58.579Z,1509051898.579 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:58.647Z,1509051898.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:59.101Z,1509051899.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:59.386Z,1509051899.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:59.472Z,1509051899.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:04:59.791Z,1509051899.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:04:59.843Z,1509051899.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:00.269Z,1509051900.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:00.576Z,1509051900.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:00.643Z,1509051900.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:01.039Z,1509051901.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:01.369Z,1509051901.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:01.454Z,1509051901.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:01.776Z,1509051901.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:01.832Z,1509051901.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:02.234Z,1509051902.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:02.570Z,1509051902.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:02.637Z,1509051902.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:03.049Z,1509051903.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:03.368Z,1509051903.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:03.448Z,1509051903.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:03.772Z,1509051903.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:03.838Z,1509051903.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:04.246Z,1509051904.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:04.566Z,1509051904.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:04.642Z,1509051904.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:05.097Z,1509051905.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:05.365Z,1509051905.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:05.458Z,1509051905.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:05.772Z,1509051905.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:05.792Z,1509051905.792 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:05:05.852Z,1509051905.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:06.264Z,1509051906.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:06.569Z,1509051906.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:06.640Z,1509051906.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:07.094Z,1509051907.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:07.386Z,1509051907.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:07.450Z,1509051907.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:07.791Z,1509051907.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:07.854Z,1509051907.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:08.233Z,1509051908.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:08.576Z,1509051908.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:08.651Z,1509051908.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:09.078Z,1509051909.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:09.370Z,1509051909.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:09.462Z,1509051909.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:09.783Z,1509051909.783 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:09.888Z,1509051909.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:10.244Z,1509051910.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:10.575Z,1509051910.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:10.641Z,1509051910.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:11.102Z,1509051911.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:11.374Z,1509051911.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:11.459Z,1509051911.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:11.781Z,1509051911.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:11.879Z,1509051911.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:12.280Z,1509051912.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:12.574Z,1509051912.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:12.638Z,1509051912.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:13.065Z,1509051913.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:13.369Z,1509051913.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:13.461Z,1509051913.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:13.776Z,1509051913.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:13.849Z,1509051913.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:14.247Z,1509051914.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:14.569Z,1509051914.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:14.643Z,1509051914.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:15.101Z,1509051915.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:15.370Z,1509051915.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:15.451Z,1509051915.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:15.775Z,1509051915.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:15.847Z,1509051915.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:16.242Z,1509051916.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:16.570Z,1509051916.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:16.651Z,1509051916.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:17.110Z,1509051917.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:17.366Z,1509051917.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:17.461Z,1509051917.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:17.772Z,1509051917.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:17.841Z,1509051917.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:18.237Z,1509051918.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:18.568Z,1509051918.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:18.641Z,1509051918.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:19.081Z,1509051919.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:19.365Z,1509051919.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:19.457Z,1509051919.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:19.771Z,1509051919.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:19.847Z,1509051919.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:20.239Z,1509051920.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:20.569Z,1509051920.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:20.654Z,1509051920.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:21.087Z,1509051921.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:21.366Z,1509051921.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:21.454Z,1509051921.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:21.772Z,1509051921.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:21.851Z,1509051921.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:22.268Z,1509051922.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:22.566Z,1509051922.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:22.655Z,1509051922.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:23.110Z,1509051923.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:23.367Z,1509051923.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:23.434Z,1509051923.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:23.772Z,1509051923.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:23.846Z,1509051923.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:24.318Z,1509051924.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:24.571Z,1509051924.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:24.647Z,1509051924.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:25.134Z,1509051925.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:25.369Z,1509051925.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:25.458Z,1509051925.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:25.777Z,1509051925.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:25.845Z,1509051925.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:26.278Z,1509051926.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:26.568Z,1509051926.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:26.648Z,1509051926.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:26.972Z,1509051926.972 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:27.087Z,1509051927.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:27.461Z,1509051927.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:27.590Z,1509051927.590 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:27.842Z,1509051927.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:28.237Z,1509051928.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:28.383Z,1509051928.383 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:28.643Z,1509051928.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:28.788Z,1509051928.788 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:29.046Z,1509051929.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:29.447Z,1509051929.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:29.574Z,1509051929.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:29.855Z,1509051929.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:30.241Z,1509051930.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:30.576Z,1509051930.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:30.630Z,1509051930.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:31.047Z,1509051931.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:31.367Z,1509051931.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:31.438Z,1509051931.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:31.852Z,1509051931.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:32.077Z,1509051932.077 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:32.256Z,1509051932.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:32.642Z,1509051932.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:32.874Z,1509051932.874 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:33.045Z,1509051933.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:33.439Z,1509051933.439 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:33.448Z,1509051933.448 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:33.449Z,1509051933.449 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 26
2017-10-26T21:05:33.449Z,1509051933.449 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:05:33.453Z,1509051933.453 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:33.453Z,1509051933.453 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 26
2017-10-26T21:05:33.453Z,1509051933.453 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:05:33.559Z,1509051933.559 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:05:33.560Z,1509051933.560 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:05:33.932Z,1509051933.932 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:05:33.932Z,1509051933.932 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 26
2017-10-26T21:05:33.933Z,1509051933.933 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:05:33.933Z,1509051933.933 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 26
2017-10-26T21:05:34.236Z,1509051934.236 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:34.253Z,1509051934.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:05:34.254Z,1509051934.254 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:05:34.254Z,1509051934.254 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:05:34.257Z,1509051934.257 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:05:34.257Z,1509051934.257 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:05:34.258Z,1509051934.258 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:05:34.640Z,1509051934.640 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:34.648Z,1509051934.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:35.074Z,1509051935.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:35.434Z,1509051935.434 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:35.451Z,1509051935.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:35.834Z,1509051935.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:35.838Z,1509051935.838 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:36.239Z,1509051936.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:36.571Z,1509051936.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:36.662Z,1509051936.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:37.082Z,1509051937.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:37.370Z,1509051937.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:37.431Z,1509051937.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:37.773Z,1509051937.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:37.844Z,1509051937.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:38.239Z,1509051938.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:38.566Z,1509051938.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:38.673Z,1509051938.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:39.086Z,1509051939.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:39.368Z,1509051939.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:39.459Z,1509051939.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:39.772Z,1509051939.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:39.841Z,1509051939.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:40.230Z,1509051940.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:40.568Z,1509051940.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:40.632Z,1509051940.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:41.083Z,1509051941.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:41.367Z,1509051941.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:41.449Z,1509051941.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:41.774Z,1509051941.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:41.833Z,1509051941.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:42.223Z,1509051942.223 [BPC1](ERROR): Failed to receive battery data
2017-10-26T21:05:42.223Z,1509051942.223 [BPC1] Communications Fault, FailCount= 1
2017-10-26T21:05:42.223Z,1509051942.223 [BPC1](ERROR): Communications Fault
2017-10-26T21:05:42.238Z,1509051942.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:42.383Z,1509051942.383 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T21:05:42.569Z,1509051942.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:42.634Z,1509051942.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:43.106Z,1509051943.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:43.367Z,1509051943.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:43.448Z,1509051943.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:43.563Z,1509051943.563 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:05:43.563Z,1509051943.563 [BPC1] No Fault, FailCount= 1
2017-10-26T21:05:43.771Z,1509051943.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:43.889Z,1509051943.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:44.234Z,1509051944.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:44.564Z,1509051944.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:44.642Z,1509051944.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:45.179Z,1509051945.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:45.364Z,1509051945.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:45.446Z,1509051945.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:45.770Z,1509051945.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:45.847Z,1509051945.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:46.255Z,1509051946.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:46.567Z,1509051946.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:46.637Z,1509051946.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:47.036Z,1509051947.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:47.365Z,1509051947.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:47.445Z,1509051947.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:47.769Z,1509051947.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:47.847Z,1509051947.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:48.272Z,1509051948.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:48.569Z,1509051948.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:48.648Z,1509051948.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:48.975Z,1509051948.975 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:49.058Z,1509051949.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:49.441Z,1509051949.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:49.573Z,1509051949.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:49.844Z,1509051949.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:50.252Z,1509051950.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:50.577Z,1509051950.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:50.646Z,1509051950.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:51.042Z,1509051951.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:51.371Z,1509051951.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:51.450Z,1509051951.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:51.831Z,1509051951.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:52.071Z,1509051952.071 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:52.257Z,1509051952.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:52.642Z,1509051952.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:52.869Z,1509051952.869 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:53.077Z,1509051953.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:53.447Z,1509051953.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:53.462Z,1509051953.462 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:53.842Z,1509051953.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:54.259Z,1509051954.259 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:54.263Z,1509051954.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:54.654Z,1509051954.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:54.664Z,1509051954.664 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:55.064Z,1509051955.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:55.457Z,1509051955.457 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:55.462Z,1509051955.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:55.848Z,1509051955.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:55.861Z,1509051955.861 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:56.283Z,1509051956.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:56.603Z,1509051956.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:56.797Z,1509051956.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:57.191Z,1509051957.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:57.392Z,1509051957.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:57.592Z,1509051957.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:57.993Z,1509051957.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:58.189Z,1509051958.189 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:58.394Z,1509051958.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:58.594Z,1509051958.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:58.765Z,1509051958.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:59.225Z,1509051959.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:59.391Z,1509051959.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:05:59.589Z,1509051959.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:05:59.795Z,1509051959.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:00.004Z,1509051960.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:00.454Z,1509051960.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:00.573Z,1509051960.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:00.795Z,1509051960.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:01.216Z,1509051961.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:01.368Z,1509051961.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:01.606Z,1509051961.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:01.774Z,1509051961.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:01.971Z,1509051961.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:02.390Z,1509051962.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:02.568Z,1509051962.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:02.783Z,1509051962.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:03.190Z,1509051963.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:03.373Z,1509051963.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:03.584Z,1509051963.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:03.777Z,1509051963.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:03.995Z,1509051963.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:04.399Z,1509051964.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:04.571Z,1509051964.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:04.764Z,1509051964.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:05.199Z,1509051965.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:05.368Z,1509051965.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:05.579Z,1509051965.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:05.775Z,1509051965.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:05.926Z,1509051965.926 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:06:05.993Z,1509051965.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:06.382Z,1509051966.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:06.570Z,1509051966.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:06.777Z,1509051966.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:07.202Z,1509051967.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:07.367Z,1509051967.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:07.579Z,1509051967.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:07.772Z,1509051967.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:07.977Z,1509051967.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:08.381Z,1509051968.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:08.569Z,1509051968.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:08.785Z,1509051968.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:09.195Z,1509051969.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:09.373Z,1509051969.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:09.584Z,1509051969.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:09.779Z,1509051969.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:09.973Z,1509051969.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:10.378Z,1509051970.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:10.574Z,1509051970.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:10.779Z,1509051970.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:11.196Z,1509051971.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:11.365Z,1509051971.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:11.624Z,1509051971.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:11.770Z,1509051971.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:12.215Z,1509051972.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:12.565Z,1509051972.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:12.634Z,1509051972.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:12.972Z,1509051972.972 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:12.985Z,1509051972.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:13.381Z,1509051973.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:13.576Z,1509051973.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:13.829Z,1509051973.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:14.198Z,1509051974.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:14.575Z,1509051974.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:14.614Z,1509051974.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:15.029Z,1509051975.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:15.368Z,1509051975.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:15.399Z,1509051975.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:15.826Z,1509051975.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:16.069Z,1509051976.069 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:16.251Z,1509051976.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:16.610Z,1509051976.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:16.866Z,1509051976.866 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:17.064Z,1509051977.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:17.407Z,1509051977.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:17.471Z,1509051977.471 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:17.781Z,1509051977.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:18.209Z,1509051978.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:18.268Z,1509051978.268 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:18.586Z,1509051978.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:18.673Z,1509051978.673 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:19.051Z,1509051979.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:19.395Z,1509051979.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:19.466Z,1509051979.466 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:19.804Z,1509051979.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:19.874Z,1509051979.874 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:20.209Z,1509051980.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:20.576Z,1509051980.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:20.609Z,1509051980.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:21.053Z,1509051981.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:21.373Z,1509051981.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:21.416Z,1509051981.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:21.780Z,1509051981.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:21.809Z,1509051981.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:22.202Z,1509051982.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:22.571Z,1509051982.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:22.607Z,1509051982.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:23.000Z,1509051983.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:23.368Z,1509051983.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:23.408Z,1509051983.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:23.773Z,1509051983.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:23.802Z,1509051983.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:24.205Z,1509051984.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:24.566Z,1509051984.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:24.633Z,1509051984.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:24.993Z,1509051984.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:25.366Z,1509051985.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:25.391Z,1509051985.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:25.773Z,1509051985.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:25.800Z,1509051985.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:26.220Z,1509051986.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:26.565Z,1509051986.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:26.604Z,1509051986.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:27.020Z,1509051987.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:27.362Z,1509051987.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:27.417Z,1509051987.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:27.767Z,1509051987.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:27.816Z,1509051987.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:28.221Z,1509051988.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:28.568Z,1509051988.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:28.624Z,1509051988.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:29.005Z,1509051989.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:29.367Z,1509051989.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:29.432Z,1509051989.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:29.769Z,1509051989.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:30.076Z,1509051990.076 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:30.252Z,1509051990.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:30.595Z,1509051990.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:30.610Z,1509051990.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:31.050Z,1509051991.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:31.393Z,1509051991.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:31.397Z,1509051991.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:31.790Z,1509051991.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:31.797Z,1509051991.797 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:32.222Z,1509051992.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:32.608Z,1509051992.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:33.049Z,1509051993.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:33.407Z,1509051993.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:33.472Z,1509051993.472 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:33.785Z,1509051993.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:34.207Z,1509051994.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:34.269Z,1509051994.269 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:34.585Z,1509051994.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:34.677Z,1509051994.677 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:35.054Z,1509051995.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:35.393Z,1509051995.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:35.471Z,1509051995.471 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:35.811Z,1509051995.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:35.875Z,1509051995.875 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:36.209Z,1509051996.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:36.572Z,1509051996.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:36.602Z,1509051996.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:37.006Z,1509051997.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:37.366Z,1509051997.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:37.420Z,1509051997.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:37.771Z,1509051997.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:37.796Z,1509051997.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:38.200Z,1509051998.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:38.564Z,1509051998.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:38.597Z,1509051998.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:39.005Z,1509051999.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:39.361Z,1509051999.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:39.406Z,1509051999.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:39.767Z,1509051999.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:39.804Z,1509051999.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:40.217Z,1509052000.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:40.559Z,1509052000.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:40.598Z,1509052000.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:40.996Z,1509052000.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:41.356Z,1509052001.356 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:41.389Z,1509052001.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:41.865Z,1509052001.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:42.157Z,1509052002.157 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:42.229Z,1509052002.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:42.582Z,1509052002.582 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:42.590Z,1509052002.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:43.017Z,1509052003.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:43.375Z,1509052003.375 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:43.394Z,1509052003.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:43.846Z,1509052003.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:44.060Z,1509052004.060 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:44.211Z,1509052004.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:44.644Z,1509052004.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:44.857Z,1509052004.857 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:45.070Z,1509052005.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:45.424Z,1509052005.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:45.455Z,1509052005.455 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:45.785Z,1509052005.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:46.213Z,1509052006.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:46.252Z,1509052006.252 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:46.594Z,1509052006.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:47.049Z,1509052007.049 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:47.049Z,1509052007.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:47.415Z,1509052007.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:47.481Z,1509052007.481 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:47.795Z,1509052007.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:48.220Z,1509052008.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:48.283Z,1509052008.283 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:48.576Z,1509052008.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:49.036Z,1509052009.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:49.080Z,1509052009.080 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:49.412Z,1509052009.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:49.485Z,1509052009.485 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:49.785Z,1509052009.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:50.222Z,1509052010.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:50.282Z,1509052010.282 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:50.592Z,1509052010.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:50.985Z,1509052010.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:51.080Z,1509052011.080 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:51.536Z,1509052011.536 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:51.560Z,1509052011.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:51.933Z,1509052011.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:52.333Z,1509052012.333 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:52.340Z,1509052012.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:52.738Z,1509052012.738 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:52.739Z,1509052012.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:53.178Z,1509052013.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:53.531Z,1509052013.531 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:53.539Z,1509052013.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:53.935Z,1509052013.935 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:53.950Z,1509052013.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:54.344Z,1509052014.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:54.576Z,1509052014.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:54.743Z,1509052014.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:55.189Z,1509052015.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:55.370Z,1509052015.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:55.652Z,1509052015.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:55.936Z,1509052015.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:56.103Z,1509052016.103 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:56.350Z,1509052016.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:56.572Z,1509052016.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:56.741Z,1509052016.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:57.183Z,1509052017.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:57.368Z,1509052017.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:57.544Z,1509052017.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:57.978Z,1509052017.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:58.098Z,1509052018.098 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:58.358Z,1509052018.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:58.573Z,1509052018.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:58.762Z,1509052018.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:59.142Z,1509052019.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:59.368Z,1509052019.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:59.581Z,1509052019.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:06:59.772Z,1509052019.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:06:59.949Z,1509052019.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:00.372Z,1509052020.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:00.568Z,1509052020.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:00.744Z,1509052020.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:01.195Z,1509052021.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:01.363Z,1509052021.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:01.548Z,1509052021.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:01.767Z,1509052021.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:01.948Z,1509052021.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:02.335Z,1509052022.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:02.561Z,1509052022.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:02.832Z,1509052022.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:03.268Z,1509052023.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:03.358Z,1509052023.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:03.644Z,1509052023.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:03.764Z,1509052023.764 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:04.128Z,1509052024.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:04.448Z,1509052024.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:04.568Z,1509052024.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:04.842Z,1509052024.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:05.239Z,1509052025.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:05.367Z,1509052025.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:05.647Z,1509052025.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:05.774Z,1509052025.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:06.065Z,1509052026.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:06.391Z,1509052026.391 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:07:06.456Z,1509052026.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:06.577Z,1509052026.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:06.844Z,1509052026.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:07.244Z,1509052027.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:07.372Z,1509052027.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:07.638Z,1509052027.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:07.777Z,1509052027.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:08.044Z,1509052028.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:08.444Z,1509052028.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:08.571Z,1509052028.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:08.843Z,1509052028.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:09.254Z,1509052029.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:09.368Z,1509052029.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:09.630Z,1509052029.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:09.775Z,1509052029.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:10.039Z,1509052030.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:10.524Z,1509052030.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:10.573Z,1509052030.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:10.822Z,1509052030.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:11.273Z,1509052031.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:11.372Z,1509052031.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:11.646Z,1509052031.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:11.779Z,1509052031.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:12.036Z,1509052032.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:12.482Z,1509052032.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:12.573Z,1509052032.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:12.831Z,1509052032.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:13.276Z,1509052033.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:13.367Z,1509052033.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:13.688Z,1509052033.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:13.775Z,1509052033.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:14.036Z,1509052034.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:14.443Z,1509052034.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:14.567Z,1509052034.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:14.842Z,1509052034.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:15.306Z,1509052035.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:15.365Z,1509052035.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:15.650Z,1509052035.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:15.769Z,1509052035.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:16.052Z,1509052036.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:16.431Z,1509052036.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:16.565Z,1509052036.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:16.836Z,1509052036.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:17.270Z,1509052037.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:17.365Z,1509052037.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:17.734Z,1509052037.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:18.042Z,1509052038.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:18.154Z,1509052038.154 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:18.452Z,1509052038.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:18.579Z,1509052038.579 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:18.838Z,1509052038.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:19.263Z,1509052039.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:19.377Z,1509052039.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:19.721Z,1509052039.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:20.026Z,1509052040.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:20.133Z,1509052040.133 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:20.451Z,1509052040.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:20.573Z,1509052040.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:20.864Z,1509052040.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:21.260Z,1509052041.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:21.371Z,1509052041.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:21.649Z,1509052041.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:21.775Z,1509052041.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:22.043Z,1509052042.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:22.438Z,1509052042.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:22.578Z,1509052042.578 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:22.878Z,1509052042.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:23.246Z,1509052043.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:23.377Z,1509052043.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:23.641Z,1509052043.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:23.783Z,1509052043.783 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:24.085Z,1509052044.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:24.436Z,1509052044.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:24.575Z,1509052044.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:24.865Z,1509052044.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:25.240Z,1509052045.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:25.372Z,1509052045.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:25.633Z,1509052045.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:25.780Z,1509052045.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:26.071Z,1509052046.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:26.436Z,1509052046.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:26.574Z,1509052046.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:26.885Z,1509052046.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:27.254Z,1509052047.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:27.373Z,1509052047.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:27.665Z,1509052047.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:27.780Z,1509052047.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:28.074Z,1509052048.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:28.425Z,1509052048.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:28.573Z,1509052048.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:28.829Z,1509052048.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:29.231Z,1509052049.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:29.369Z,1509052049.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:29.644Z,1509052049.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:29.811Z,1509052049.811 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:30.053Z,1509052050.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:30.426Z,1509052050.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:30.575Z,1509052050.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:30.831Z,1509052050.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:31.235Z,1509052051.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:31.366Z,1509052051.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:31.712Z,1509052051.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:32.051Z,1509052052.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:32.135Z,1509052052.135 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:32.429Z,1509052052.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:32.842Z,1509052052.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:32.932Z,1509052052.932 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:33.236Z,1509052053.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:33.624Z,1509052053.624 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:33.703Z,1509052053.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:34.086Z,1509052054.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:34.461Z,1509052054.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:34.579Z,1509052054.579 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:34.841Z,1509052054.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:35.236Z,1509052055.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:35.374Z,1509052055.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:35.643Z,1509052055.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:36.052Z,1509052056.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:36.113Z,1509052056.113 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:36.443Z,1509052056.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:36.573Z,1509052056.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:36.838Z,1509052056.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:37.267Z,1509052057.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:37.369Z,1509052057.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:37.659Z,1509052057.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:37.775Z,1509052057.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:38.074Z,1509052058.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:38.475Z,1509052058.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:38.569Z,1509052058.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:38.842Z,1509052058.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:39.252Z,1509052059.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:39.370Z,1509052059.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:39.705Z,1509052059.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:39.775Z,1509052059.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:40.041Z,1509052060.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:40.484Z,1509052060.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:40.570Z,1509052060.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:40.828Z,1509052060.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:41.252Z,1509052061.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:41.365Z,1509052061.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:41.680Z,1509052061.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:41.770Z,1509052061.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:42.030Z,1509052062.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:42.443Z,1509052062.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:42.567Z,1509052062.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:42.833Z,1509052062.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:43.309Z,1509052063.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:43.366Z,1509052063.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:43.635Z,1509052063.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:43.773Z,1509052063.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:44.056Z,1509052064.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:44.436Z,1509052064.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:44.566Z,1509052064.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:44.841Z,1509052064.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:45.252Z,1509052065.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:45.371Z,1509052065.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:45.723Z,1509052065.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:46.035Z,1509052066.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:46.120Z,1509052066.120 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:46.434Z,1509052066.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:46.575Z,1509052066.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:46.832Z,1509052066.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:47.252Z,1509052067.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:47.367Z,1509052067.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:47.696Z,1509052067.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:48.027Z,1509052068.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:48.124Z,1509052068.124 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:48.436Z,1509052068.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:48.572Z,1509052068.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:48.840Z,1509052068.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:49.253Z,1509052069.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:49.369Z,1509052069.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:49.652Z,1509052069.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:49.776Z,1509052069.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:50.037Z,1509052070.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:50.450Z,1509052070.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:50.571Z,1509052070.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:50.866Z,1509052070.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:51.273Z,1509052071.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:51.374Z,1509052071.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:51.634Z,1509052071.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:51.781Z,1509052071.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:52.032Z,1509052072.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:52.437Z,1509052072.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:52.578Z,1509052072.578 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:52.846Z,1509052072.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:53.230Z,1509052073.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:53.376Z,1509052073.376 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:53.678Z,1509052073.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:53.780Z,1509052073.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:54.035Z,1509052074.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:54.436Z,1509052074.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:54.575Z,1509052074.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:54.873Z,1509052074.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:55.239Z,1509052075.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:55.375Z,1509052075.375 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:55.666Z,1509052075.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:55.779Z,1509052075.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:56.066Z,1509052076.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:56.453Z,1509052076.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:56.573Z,1509052076.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:56.831Z,1509052076.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:57.236Z,1509052077.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:57.370Z,1509052077.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:57.642Z,1509052077.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:57.777Z,1509052077.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:58.035Z,1509052078.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:58.451Z,1509052078.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:58.572Z,1509052078.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:58.835Z,1509052078.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:59.226Z,1509052079.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:59.369Z,1509052079.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:07:59.634Z,1509052079.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:07:59.774Z,1509052079.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:00.033Z,1509052080.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:00.448Z,1509052080.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:00.571Z,1509052080.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:00.836Z,1509052080.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:01.229Z,1509052081.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:01.370Z,1509052081.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:01.635Z,1509052081.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:01.781Z,1509052081.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:02.061Z,1509052082.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:02.437Z,1509052082.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:02.576Z,1509052082.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:02.833Z,1509052082.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:03.246Z,1509052083.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:03.371Z,1509052083.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:03.646Z,1509052083.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:03.776Z,1509052083.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:04.042Z,1509052084.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:04.431Z,1509052084.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:04.575Z,1509052084.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:04.847Z,1509052084.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:04.982Z,1509052084.982 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:05.236Z,1509052085.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:05.415Z,1509052085.415 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:05.650Z,1509052085.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:06.038Z,1509052086.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:06.213Z,1509052086.213 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:06.456Z,1509052086.456 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:08:06.575Z,1509052086.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:06.616Z,1509052086.616 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:06.996Z,1509052086.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:07.321Z,1509052087.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:07.410Z,1509052087.410 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:07.732Z,1509052087.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:07.816Z,1509052087.816 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:08.101Z,1509052088.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:08.551Z,1509052088.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:08.603Z,1509052088.603 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:08.994Z,1509052088.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:09.311Z,1509052089.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:09.397Z,1509052089.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:09.717Z,1509052089.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:09.801Z,1509052089.801 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:10.175Z,1509052090.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:10.521Z,1509052090.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:10.922Z,1509052090.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:11.371Z,1509052091.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:11.476Z,1509052091.476 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:11.718Z,1509052091.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:12.114Z,1509052092.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:12.273Z,1509052092.273 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:12.500Z,1509052092.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:12.678Z,1509052092.678 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:12.925Z,1509052092.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:13.319Z,1509052093.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:13.471Z,1509052093.471 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:13.730Z,1509052093.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:14.098Z,1509052094.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:14.268Z,1509052094.268 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:14.516Z,1509052094.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:14.673Z,1509052094.673 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:14.979Z,1509052094.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:15.299Z,1509052095.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:15.450Z,1509052095.450 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:15.702Z,1509052095.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:16.103Z,1509052096.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:16.247Z,1509052096.247 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:16.546Z,1509052096.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:16.653Z,1509052096.653 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:16.900Z,1509052096.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:17.311Z,1509052097.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:17.445Z,1509052097.445 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:17.710Z,1509052097.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:18.119Z,1509052098.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:18.242Z,1509052098.242 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:18.510Z,1509052098.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:18.647Z,1509052098.647 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:18.949Z,1509052098.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:19.310Z,1509052099.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:19.440Z,1509052099.440 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:19.711Z,1509052099.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:20.121Z,1509052100.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:20.237Z,1509052100.237 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:20.516Z,1509052100.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:20.642Z,1509052100.642 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:20.921Z,1509052100.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:21.306Z,1509052101.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:21.435Z,1509052101.435 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:21.711Z,1509052101.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:21.841Z,1509052101.841 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:22.108Z,1509052102.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:22.511Z,1509052102.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:22.593Z,1509052102.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:22.924Z,1509052102.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:23.390Z,1509052103.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:23.472Z,1509052103.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:23.795Z,1509052103.795 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:23.854Z,1509052103.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:24.255Z,1509052104.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:24.573Z,1509052104.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:24.690Z,1509052104.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:25.134Z,1509052105.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:25.371Z,1509052105.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:25.503Z,1509052105.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:25.774Z,1509052105.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:25.907Z,1509052105.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:26.300Z,1509052106.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:26.567Z,1509052106.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:26.667Z,1509052106.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:27.094Z,1509052107.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:27.380Z,1509052107.380 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:27.471Z,1509052107.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:27.787Z,1509052107.787 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:27.864Z,1509052107.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:28.272Z,1509052108.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:28.571Z,1509052108.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:28.670Z,1509052108.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:29.119Z,1509052109.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:29.368Z,1509052109.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:29.463Z,1509052109.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:29.774Z,1509052109.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:29.860Z,1509052109.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:30.279Z,1509052110.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:30.565Z,1509052110.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:30.671Z,1509052110.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:31.133Z,1509052111.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:31.365Z,1509052111.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:31.485Z,1509052111.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:31.779Z,1509052111.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:31.865Z,1509052111.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:32.265Z,1509052112.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:32.572Z,1509052112.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:32.663Z,1509052112.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:33.074Z,1509052113.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:33.368Z,1509052113.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:33.476Z,1509052113.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:33.774Z,1509052113.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:33.872Z,1509052113.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:34.273Z,1509052114.273 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:34.273Z,1509052114.273 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 27
2017-10-26T21:08:34.273Z,1509052114.273 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:08:34.278Z,1509052114.278 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:34.278Z,1509052114.278 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 27
2017-10-26T21:08:34.278Z,1509052114.278 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:08:34.325Z,1509052114.325 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:08:34.325Z,1509052114.325 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:08:34.568Z,1509052114.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:34.736Z,1509052114.736 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:08:34.736Z,1509052114.736 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 27
2017-10-26T21:08:34.737Z,1509052114.737 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:08:34.737Z,1509052114.737 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 27
2017-10-26T21:08:35.077Z,1509052115.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:08:35.078Z,1509052115.078 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:08:35.078Z,1509052115.078 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:08:35.086Z,1509052115.086 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:08:35.086Z,1509052115.086 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:08:35.087Z,1509052115.087 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:08:35.367Z,1509052115.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:35.473Z,1509052115.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:35.769Z,1509052115.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:35.878Z,1509052115.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:36.268Z,1509052116.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:36.566Z,1509052116.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:36.673Z,1509052116.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:37.072Z,1509052117.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:37.369Z,1509052117.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:37.503Z,1509052117.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:37.903Z,1509052117.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:38.119Z,1509052118.119 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:38.262Z,1509052118.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:38.582Z,1509052118.582 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:38.700Z,1509052118.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:39.073Z,1509052119.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:39.377Z,1509052119.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:39.498Z,1509052119.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:39.784Z,1509052119.784 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:39.870Z,1509052119.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:40.305Z,1509052120.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:40.577Z,1509052120.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:40.673Z,1509052120.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:41.072Z,1509052121.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:41.371Z,1509052121.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:41.468Z,1509052121.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:41.783Z,1509052121.783 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:41.878Z,1509052121.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:42.277Z,1509052122.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:42.574Z,1509052122.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:42.677Z,1509052122.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:43.095Z,1509052123.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:43.369Z,1509052123.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:43.472Z,1509052123.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:43.774Z,1509052123.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:43.866Z,1509052123.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:44.281Z,1509052124.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:44.570Z,1509052124.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:44.670Z,1509052124.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:45.109Z,1509052125.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:45.368Z,1509052125.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:45.472Z,1509052125.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:45.775Z,1509052125.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:45.871Z,1509052125.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:46.283Z,1509052126.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:46.570Z,1509052126.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:46.677Z,1509052126.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:47.090Z,1509052127.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:47.392Z,1509052127.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:47.507Z,1509052127.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:47.796Z,1509052127.796 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:47.873Z,1509052127.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:48.292Z,1509052128.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:48.573Z,1509052128.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:48.673Z,1509052128.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:49.087Z,1509052129.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:49.371Z,1509052129.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:49.465Z,1509052129.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:49.787Z,1509052129.787 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:49.862Z,1509052129.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:50.264Z,1509052130.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:50.575Z,1509052130.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:50.668Z,1509052130.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:51.182Z,1509052131.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:51.366Z,1509052131.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:51.479Z,1509052131.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:51.770Z,1509052131.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:51.861Z,1509052131.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:52.324Z,1509052132.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:52.566Z,1509052132.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:52.663Z,1509052132.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:53.099Z,1509052133.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:53.368Z,1509052133.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:53.475Z,1509052133.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:53.776Z,1509052133.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:53.917Z,1509052133.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:54.314Z,1509052134.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:54.571Z,1509052134.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:54.670Z,1509052134.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:55.081Z,1509052135.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:55.368Z,1509052135.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:55.476Z,1509052135.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:55.772Z,1509052135.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:55.863Z,1509052135.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:56.267Z,1509052136.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:56.566Z,1509052136.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:56.671Z,1509052136.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:57.071Z,1509052137.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:57.373Z,1509052137.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:57.490Z,1509052137.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:57.878Z,1509052137.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:58.064Z,1509052138.064 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:58.283Z,1509052138.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:58.582Z,1509052138.582 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:58.684Z,1509052138.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:59.097Z,1509052139.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:59.374Z,1509052139.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:59.466Z,1509052139.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:08:59.779Z,1509052139.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:08:59.865Z,1509052139.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:00.274Z,1509052140.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:00.580Z,1509052140.580 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:00.681Z,1509052140.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:01.084Z,1509052141.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:01.377Z,1509052141.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:01.473Z,1509052141.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:01.782Z,1509052141.782 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:01.886Z,1509052141.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:02.268Z,1509052142.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:02.575Z,1509052142.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:02.681Z,1509052142.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:03.080Z,1509052143.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:03.374Z,1509052143.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:03.472Z,1509052143.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:03.781Z,1509052143.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:03.872Z,1509052143.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:04.287Z,1509052144.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:04.571Z,1509052144.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:04.671Z,1509052144.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:05.080Z,1509052145.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:05.365Z,1509052145.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:05.477Z,1509052145.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:05.772Z,1509052145.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:05.872Z,1509052145.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:06.327Z,1509052146.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:06.565Z,1509052146.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:06.618Z,1509052146.618 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:09:06.731Z,1509052146.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:07.072Z,1509052147.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:07.363Z,1509052147.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:07.523Z,1509052147.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:07.767Z,1509052147.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:07.879Z,1509052147.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:08.294Z,1509052148.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:08.561Z,1509052148.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:08.709Z,1509052148.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:09.224Z,1509052149.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:09.368Z,1509052149.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:09.650Z,1509052149.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:09.771Z,1509052149.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:10.027Z,1509052150.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:10.427Z,1509052150.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:10.575Z,1509052150.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:10.854Z,1509052150.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:11.247Z,1509052151.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:11.385Z,1509052151.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:11.646Z,1509052151.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:11.789Z,1509052151.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:12.049Z,1509052152.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:12.444Z,1509052152.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:12.574Z,1509052152.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:12.843Z,1509052152.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:13.240Z,1509052153.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:13.370Z,1509052153.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:13.641Z,1509052153.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:13.777Z,1509052153.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:14.044Z,1509052154.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:14.423Z,1509052154.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:14.570Z,1509052154.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:14.851Z,1509052154.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:15.232Z,1509052155.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:15.379Z,1509052155.379 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:15.649Z,1509052155.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:15.785Z,1509052155.785 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:16.037Z,1509052156.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:16.442Z,1509052156.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:16.585Z,1509052156.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:16.877Z,1509052156.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:17.234Z,1509052157.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:17.378Z,1509052157.378 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:17.641Z,1509052157.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:17.783Z,1509052157.783 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:18.037Z,1509052158.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:18.438Z,1509052158.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:18.576Z,1509052158.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:18.844Z,1509052158.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:19.231Z,1509052159.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:19.379Z,1509052159.379 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:19.641Z,1509052159.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:19.786Z,1509052159.786 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:20.038Z,1509052160.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:20.439Z,1509052160.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:20.585Z,1509052160.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:20.896Z,1509052160.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:21.244Z,1509052161.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:21.385Z,1509052161.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:21.676Z,1509052161.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:21.789Z,1509052161.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:22.040Z,1509052162.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:22.468Z,1509052162.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:23.108Z,1509052163.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:23.423Z,1509052163.423 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:23.440Z,1509052163.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:23.826Z,1509052163.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:24.221Z,1509052164.221 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:24.225Z,1509052164.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:24.630Z,1509052164.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:25.019Z,1509052165.019 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:25.099Z,1509052165.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:25.433Z,1509052165.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:25.507Z,1509052165.507 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:25.823Z,1509052165.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:26.230Z,1509052166.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:26.304Z,1509052166.304 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:26.629Z,1509052166.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:26.709Z,1509052166.709 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:27.044Z,1509052167.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:27.432Z,1509052167.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:27.486Z,1509052167.486 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:27.833Z,1509052167.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:28.221Z,1509052168.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:28.283Z,1509052168.283 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:28.618Z,1509052168.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:28.688Z,1509052168.688 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:29.109Z,1509052169.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:29.431Z,1509052169.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:29.481Z,1509052169.481 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:29.824Z,1509052169.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:29.885Z,1509052169.885 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:30.235Z,1509052170.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:30.576Z,1509052170.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:30.617Z,1509052170.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:31.052Z,1509052171.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:31.368Z,1509052171.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:31.444Z,1509052171.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:31.772Z,1509052171.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:31.836Z,1509052171.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:32.267Z,1509052172.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:32.567Z,1509052172.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:32.648Z,1509052172.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:33.087Z,1509052173.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:33.367Z,1509052173.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:33.450Z,1509052173.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:33.774Z,1509052173.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:33.828Z,1509052173.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:34.234Z,1509052174.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:34.569Z,1509052174.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:34.608Z,1509052174.608 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T21:09:34.609Z,1509052174.609 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:09:34.609Z,1509052174.609 [BPC1](ERROR): Data Fault
2017-10-26T21:09:34.639Z,1509052174.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:34.702Z,1509052174.702 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:09:35.084Z,1509052175.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:35.366Z,1509052175.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:35.446Z,1509052175.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:35.772Z,1509052175.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:35.874Z,1509052175.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:35.972Z,1509052175.972 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:09:35.972Z,1509052175.972 [BPC1] No Fault, FailCount= 1
2017-10-26T21:09:36.305Z,1509052176.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:36.564Z,1509052176.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:36.633Z,1509052176.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:37.113Z,1509052177.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:37.362Z,1509052177.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:37.421Z,1509052177.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:37.774Z,1509052177.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:37.853Z,1509052177.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:38.266Z,1509052178.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:38.572Z,1509052178.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:38.624Z,1509052178.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:39.059Z,1509052179.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:39.368Z,1509052179.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:39.444Z,1509052179.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:39.773Z,1509052179.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:39.840Z,1509052179.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:40.247Z,1509052180.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:40.571Z,1509052180.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:40.632Z,1509052180.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:40.976Z,1509052180.976 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:41.084Z,1509052181.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:41.434Z,1509052181.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:41.503Z,1509052181.503 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:41.815Z,1509052181.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:42.223Z,1509052182.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:42.301Z,1509052182.301 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:42.620Z,1509052182.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:43.081Z,1509052183.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:43.098Z,1509052183.098 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:43.426Z,1509052183.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:43.504Z,1509052183.504 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:43.829Z,1509052183.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:44.236Z,1509052184.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:44.303Z,1509052184.303 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:44.639Z,1509052184.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:45.076Z,1509052185.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:45.101Z,1509052185.101 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:45.430Z,1509052185.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:45.514Z,1509052185.514 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:45.829Z,1509052185.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:46.221Z,1509052186.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:46.311Z,1509052186.311 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:46.626Z,1509052186.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:46.716Z,1509052186.716 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:47.092Z,1509052187.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:47.427Z,1509052187.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:47.485Z,1509052187.485 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:47.818Z,1509052187.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:48.237Z,1509052188.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:48.282Z,1509052188.282 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:48.668Z,1509052188.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:48.687Z,1509052188.687 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:49.062Z,1509052189.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:49.476Z,1509052189.476 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:49.490Z,1509052189.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:49.828Z,1509052189.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:50.217Z,1509052190.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:50.273Z,1509052190.273 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:50.660Z,1509052190.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:50.678Z,1509052190.678 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:51.068Z,1509052191.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:51.471Z,1509052191.471 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:51.483Z,1509052191.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:51.847Z,1509052191.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:51.876Z,1509052191.876 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:52.228Z,1509052192.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:52.583Z,1509052192.583 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:52.644Z,1509052192.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:53.082Z,1509052193.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:53.382Z,1509052193.382 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:53.467Z,1509052193.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:53.787Z,1509052193.787 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:53.815Z,1509052193.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:54.232Z,1509052194.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:54.581Z,1509052194.581 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:54.646Z,1509052194.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:55.092Z,1509052195.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:55.377Z,1509052195.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:55.418Z,1509052195.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:55.783Z,1509052195.783 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:55.832Z,1509052195.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:56.229Z,1509052196.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:56.575Z,1509052196.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:56.621Z,1509052196.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:57.116Z,1509052197.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:57.372Z,1509052197.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:57.427Z,1509052197.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:57.779Z,1509052197.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:57.822Z,1509052197.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:58.248Z,1509052198.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:58.570Z,1509052198.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:58.634Z,1509052198.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:59.122Z,1509052199.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:59.367Z,1509052199.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:59.430Z,1509052199.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:09:59.772Z,1509052199.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:09:59.809Z,1509052199.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:00.231Z,1509052200.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:00.569Z,1509052200.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:00.645Z,1509052200.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:01.051Z,1509052201.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:01.373Z,1509052201.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:01.428Z,1509052201.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:01.776Z,1509052201.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:01.818Z,1509052201.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:02.224Z,1509052202.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:02.579Z,1509052202.579 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:02.637Z,1509052202.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:03.028Z,1509052203.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:03.374Z,1509052203.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:03.432Z,1509052203.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:03.779Z,1509052203.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:03.872Z,1509052203.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:04.243Z,1509052204.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:04.572Z,1509052204.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:04.640Z,1509052204.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:04.976Z,1509052204.976 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:05.052Z,1509052205.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:05.423Z,1509052205.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:05.573Z,1509052205.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:05.824Z,1509052205.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:06.265Z,1509052206.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:06.606Z,1509052206.606 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:06.645Z,1509052206.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:07.020Z,1509052207.020 [BPC1](ERROR): Failed to receive battery data
2017-10-26T21:10:07.020Z,1509052207.020 [BPC1] Communications Fault, FailCount= 1
2017-10-26T21:10:07.020Z,1509052207.020 [BPC1](ERROR): Communications Fault
2017-10-26T21:10:07.054Z,1509052207.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:07.171Z,1509052207.171 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T21:10:07.375Z,1509052207.375 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:10:07.404Z,1509052207.404 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:07.442Z,1509052207.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:07.829Z,1509052207.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:08.077Z,1509052208.077 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:08.239Z,1509052208.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:08.342Z,1509052208.342 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:10:08.342Z,1509052208.342 [BPC1] No Fault, FailCount= 1
2017-10-26T21:10:08.672Z,1509052208.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:08.874Z,1509052208.874 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:09.065Z,1509052209.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:09.453Z,1509052209.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:09.499Z,1509052209.499 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:09.851Z,1509052209.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:10.278Z,1509052210.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:10.296Z,1509052210.296 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:10.663Z,1509052210.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:10.701Z,1509052210.701 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:11.066Z,1509052211.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:11.447Z,1509052211.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:11.450Z,1509052211.450 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:11.881Z,1509052211.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:12.247Z,1509052212.247 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:12.251Z,1509052212.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:12.626Z,1509052212.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:12.652Z,1509052212.652 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:13.076Z,1509052213.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:13.440Z,1509052213.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:13.445Z,1509052213.445 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:13.840Z,1509052213.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:13.850Z,1509052213.850 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:14.228Z,1509052214.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:14.615Z,1509052214.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:15.094Z,1509052215.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:15.451Z,1509052215.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:15.508Z,1509052215.508 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:15.819Z,1509052215.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:16.261Z,1509052216.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:16.306Z,1509052216.306 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:16.624Z,1509052216.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:16.711Z,1509052216.711 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:17.066Z,1509052217.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:17.438Z,1509052217.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:17.439Z,1509052217.439 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:17.816Z,1509052217.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:18.227Z,1509052218.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:18.237Z,1509052218.237 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:18.632Z,1509052218.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:19.034Z,1509052219.034 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:19.074Z,1509052219.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:19.433Z,1509052219.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:19.495Z,1509052219.495 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:19.813Z,1509052219.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:20.239Z,1509052220.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:20.292Z,1509052220.292 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:20.614Z,1509052220.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:20.702Z,1509052220.703 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:21.120Z,1509052221.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:21.435Z,1509052221.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:21.482Z,1509052221.482 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:21.821Z,1509052221.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:22.241Z,1509052222.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:22.279Z,1509052222.279 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:22.666Z,1509052222.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:22.686Z,1509052222.686 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:23.110Z,1509052223.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:23.481Z,1509052223.481 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:23.486Z,1509052223.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:23.860Z,1509052223.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:23.885Z,1509052223.885 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:24.227Z,1509052224.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:24.578Z,1509052224.578 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:24.617Z,1509052224.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:25.106Z,1509052225.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:25.372Z,1509052225.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:25.430Z,1509052225.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:25.781Z,1509052225.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:25.815Z,1509052225.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:26.235Z,1509052226.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:26.580Z,1509052226.580 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:26.631Z,1509052226.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:27.170Z,1509052227.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:27.383Z,1509052227.383 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:27.421Z,1509052227.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:27.790Z,1509052227.790 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:27.850Z,1509052227.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:28.273Z,1509052228.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:28.584Z,1509052228.584 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:28.676Z,1509052228.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:29.075Z,1509052229.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:29.384Z,1509052229.384 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:29.436Z,1509052229.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:29.790Z,1509052229.790 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:29.833Z,1509052229.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:30.236Z,1509052230.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:30.581Z,1509052230.581 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:30.624Z,1509052230.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:31.047Z,1509052231.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:31.375Z,1509052231.375 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:31.440Z,1509052231.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:31.782Z,1509052231.782 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:31.829Z,1509052231.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:32.243Z,1509052232.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:32.575Z,1509052232.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:32.643Z,1509052232.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:33.047Z,1509052233.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:33.370Z,1509052233.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:33.443Z,1509052233.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:33.777Z,1509052233.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:33.820Z,1509052233.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:34.251Z,1509052234.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:34.570Z,1509052234.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:34.676Z,1509052234.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:35.036Z,1509052235.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:35.364Z,1509052235.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:35.440Z,1509052235.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:35.767Z,1509052235.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:35.854Z,1509052235.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:36.243Z,1509052236.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:36.561Z,1509052236.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:36.659Z,1509052236.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:37.066Z,1509052237.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:37.362Z,1509052237.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:37.467Z,1509052237.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:37.767Z,1509052237.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:37.849Z,1509052237.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:38.242Z,1509052238.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:38.566Z,1509052238.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:38.629Z,1509052238.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:39.080Z,1509052239.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:39.361Z,1509052239.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:39.436Z,1509052239.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:39.768Z,1509052239.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:39.861Z,1509052239.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:40.260Z,1509052240.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:40.568Z,1509052240.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:40.633Z,1509052240.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:41.103Z,1509052241.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:41.366Z,1509052241.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:41.435Z,1509052241.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:41.773Z,1509052241.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:41.820Z,1509052241.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:42.227Z,1509052242.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:42.566Z,1509052242.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:42.628Z,1509052242.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:43.066Z,1509052243.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:43.376Z,1509052243.376 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:43.446Z,1509052243.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:43.780Z,1509052243.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:43.855Z,1509052243.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:44.238Z,1509052244.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:44.573Z,1509052244.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:44.628Z,1509052244.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:45.105Z,1509052245.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:45.367Z,1509052245.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:45.477Z,1509052245.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:45.772Z,1509052245.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:45.836Z,1509052245.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:46.222Z,1509052246.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:46.564Z,1509052246.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:46.740Z,1509052246.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:47.118Z,1509052247.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:47.362Z,1509052247.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:47.535Z,1509052247.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:47.768Z,1509052247.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:47.929Z,1509052247.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:48.327Z,1509052248.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:48.559Z,1509052248.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:48.750Z,1509052248.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:49.110Z,1509052249.110 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T21:10:49.111Z,1509052249.111 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:10:49.111Z,1509052249.111 [BPC1](ERROR): Data Fault
2017-10-26T21:10:49.179Z,1509052249.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:49.201Z,1509052249.201 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:10:49.357Z,1509052249.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:49.549Z,1509052249.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:49.762Z,1509052249.762 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:49.919Z,1509052249.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:50.325Z,1509052250.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:50.383Z,1509052250.383 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:10:50.383Z,1509052250.383 [BPC1] No Fault, FailCount= 1
2017-10-26T21:10:50.559Z,1509052250.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:50.777Z,1509052250.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:51.183Z,1509052251.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:51.358Z,1509052251.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:51.540Z,1509052251.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:51.766Z,1509052251.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:51.922Z,1509052251.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:52.344Z,1509052252.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:52.564Z,1509052252.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:52.723Z,1509052252.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:53.153Z,1509052253.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:53.428Z,1509052253.428 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:53.543Z,1509052253.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:53.926Z,1509052253.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:54.224Z,1509052254.224 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:54.315Z,1509052254.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:54.629Z,1509052254.629 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:54.731Z,1509052254.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:55.146Z,1509052255.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:55.426Z,1509052255.426 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:55.539Z,1509052255.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:55.831Z,1509052255.831 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:55.927Z,1509052255.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:56.316Z,1509052256.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:56.576Z,1509052256.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:56.741Z,1509052256.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:57.115Z,1509052257.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:57.371Z,1509052257.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:57.523Z,1509052257.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:57.778Z,1509052257.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:57.938Z,1509052257.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:58.331Z,1509052258.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:58.572Z,1509052258.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:58.738Z,1509052258.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:59.113Z,1509052259.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:59.368Z,1509052259.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:10:59.753Z,1509052259.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:10:59.773Z,1509052259.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:00.099Z,1509052260.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:00.502Z,1509052260.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:00.576Z,1509052260.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:00.904Z,1509052260.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:01.322Z,1509052261.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:01.372Z,1509052261.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:01.730Z,1509052261.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:01.778Z,1509052261.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:02.192Z,1509052262.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:02.494Z,1509052262.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:02.569Z,1509052262.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:02.912Z,1509052262.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:03.346Z,1509052263.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:03.367Z,1509052263.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:03.697Z,1509052263.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:03.772Z,1509052263.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:04.130Z,1509052264.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:04.495Z,1509052264.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:04.569Z,1509052264.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:05.003Z,1509052265.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:05.340Z,1509052265.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:05.368Z,1509052265.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:05.764Z,1509052265.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:05.779Z,1509052265.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:06.110Z,1509052266.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:06.498Z,1509052266.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:06.896Z,1509052266.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:07.299Z,1509052267.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:07.469Z,1509052267.469 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:07.657Z,1509052267.657 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:11:07.708Z,1509052267.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:08.120Z,1509052268.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:08.266Z,1509052268.266 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:08.510Z,1509052268.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:08.671Z,1509052268.671 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:08.913Z,1509052268.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:09.313Z,1509052269.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:09.464Z,1509052269.464 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:09.695Z,1509052269.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:09.869Z,1509052269.869 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:10.095Z,1509052270.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:10.499Z,1509052270.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:10.578Z,1509052270.578 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:10.922Z,1509052270.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:11.372Z,1509052271.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:11.386Z,1509052271.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:11.712Z,1509052271.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:11.787Z,1509052271.787 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:12.093Z,1509052272.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:12.492Z,1509052272.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:12.573Z,1509052272.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:12.906Z,1509052272.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:13.310Z,1509052273.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:13.368Z,1509052273.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:13.747Z,1509052273.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:14.100Z,1509052274.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:14.143Z,1509052274.143 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:14.507Z,1509052274.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:14.574Z,1509052274.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:14.921Z,1509052274.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:15.311Z,1509052275.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:15.365Z,1509052275.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:15.759Z,1509052275.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:16.096Z,1509052276.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:16.126Z,1509052276.126 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:16.504Z,1509052276.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:16.602Z,1509052276.602 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:16.913Z,1509052276.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:17.326Z,1509052277.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:17.397Z,1509052277.397 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:17.695Z,1509052277.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:17.804Z,1509052277.804 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:18.132Z,1509052278.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:18.501Z,1509052278.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:18.591Z,1509052278.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:18.925Z,1509052278.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:19.344Z,1509052279.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:19.387Z,1509052279.387 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:19.701Z,1509052279.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:19.792Z,1509052279.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:20.112Z,1509052280.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:20.527Z,1509052280.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:20.577Z,1509052280.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:20.912Z,1509052280.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:21.319Z,1509052281.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:21.371Z,1509052281.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:21.719Z,1509052281.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:21.775Z,1509052281.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:22.133Z,1509052282.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:22.499Z,1509052282.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:22.569Z,1509052282.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:22.897Z,1509052282.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:23.298Z,1509052283.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:23.366Z,1509052283.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:23.708Z,1509052283.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:23.770Z,1509052283.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:24.109Z,1509052284.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:24.515Z,1509052284.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:24.566Z,1509052284.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:24.890Z,1509052284.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:25.367Z,1509052285.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:25.403Z,1509052285.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:25.698Z,1509052285.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:25.780Z,1509052285.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:26.112Z,1509052286.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:26.507Z,1509052286.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:26.575Z,1509052286.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:26.912Z,1509052286.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:27.323Z,1509052287.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:27.374Z,1509052287.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:27.718Z,1509052287.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:27.785Z,1509052287.785 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:28.114Z,1509052288.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:28.518Z,1509052288.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:28.578Z,1509052288.578 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:28.905Z,1509052288.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:29.304Z,1509052289.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:29.375Z,1509052289.375 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:29.724Z,1509052289.724 [BPC1](ERROR): Failed to parse message.
2017-10-26T21:11:29.724Z,1509052289.724 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T21:11:29.724Z,1509052289.724 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:11:29.724Z,1509052289.724 [BPC1](ERROR): Data Fault
2017-10-26T21:11:29.737Z,1509052289.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:29.780Z,1509052289.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:29.849Z,1509052289.849 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:11:30.102Z,1509052290.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:30.505Z,1509052290.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:30.576Z,1509052290.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:30.896Z,1509052290.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:31.030Z,1509052291.030 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:11:31.030Z,1509052291.030 [BPC1] No Fault, FailCount= 1
2017-10-26T21:11:31.372Z,1509052291.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:31.382Z,1509052291.382 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:31.701Z,1509052291.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:31.789Z,1509052291.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:32.159Z,1509052292.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:32.501Z,1509052292.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:32.588Z,1509052292.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:32.921Z,1509052292.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:33.311Z,1509052293.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:33.382Z,1509052293.382 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:33.695Z,1509052293.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:33.794Z,1509052293.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:34.121Z,1509052294.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:34.501Z,1509052294.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:34.587Z,1509052294.587 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:34.926Z,1509052294.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:35.312Z,1509052295.312 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:35.312Z,1509052295.312 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 28
2017-10-26T21:11:35.312Z,1509052295.312 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:11:35.319Z,1509052295.319 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:35.319Z,1509052295.319 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 28
2017-10-26T21:11:35.319Z,1509052295.319 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:11:35.381Z,1509052295.381 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:35.400Z,1509052295.400 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:11:35.400Z,1509052295.400 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:11:35.781Z,1509052295.781 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:11:35.782Z,1509052295.782 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 28
2017-10-26T21:11:35.782Z,1509052295.782 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:11:35.782Z,1509052295.782 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 28
2017-10-26T21:11:35.785Z,1509052295.785 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:36.110Z,1509052296.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:11:36.110Z,1509052296.110 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:11:36.110Z,1509052296.110 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:11:36.120Z,1509052296.120 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:11:36.125Z,1509052296.125 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:11:36.125Z,1509052296.125 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:11:36.504Z,1509052296.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:36.574Z,1509052296.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:36.991Z,1509052296.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:37.315Z,1509052297.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:37.369Z,1509052297.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:37.709Z,1509052297.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:37.776Z,1509052297.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:38.088Z,1509052298.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:38.526Z,1509052298.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:38.576Z,1509052298.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:38.959Z,1509052298.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:39.326Z,1509052299.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:39.371Z,1509052299.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:39.719Z,1509052299.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:39.775Z,1509052299.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:40.094Z,1509052300.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:40.498Z,1509052300.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:40.571Z,1509052300.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:40.896Z,1509052300.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:41.318Z,1509052301.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:41.370Z,1509052301.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:41.696Z,1509052301.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:41.777Z,1509052301.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:42.094Z,1509052302.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:42.504Z,1509052302.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:42.575Z,1509052302.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:43.022Z,1509052303.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:43.304Z,1509052303.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:43.375Z,1509052303.375 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:43.714Z,1509052303.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:43.781Z,1509052303.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:44.182Z,1509052304.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:44.519Z,1509052304.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:44.579Z,1509052304.579 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:44.000Z,1509052305.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:45.315Z,1509052305.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:45.376Z,1509052305.376 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:45.726Z,1509052305.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:45.780Z,1509052305.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:46.199Z,1509052306.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:46.525Z,1509052306.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:46.575Z,1509052306.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:46.980Z,1509052306.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:47.296Z,1509052307.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:47.367Z,1509052307.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:47.696Z,1509052307.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:47.771Z,1509052307.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:48.096Z,1509052308.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:48.533Z,1509052308.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:48.567Z,1509052308.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:48.901Z,1509052308.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:49.366Z,1509052309.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:49.495Z,1509052309.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:49.772Z,1509052309.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:49.895Z,1509052309.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:50.286Z,1509052310.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:50.572Z,1509052310.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:50.685Z,1509052310.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:51.088Z,1509052311.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:51.380Z,1509052311.380 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:51.505Z,1509052311.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:51.790Z,1509052311.790 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:51.888Z,1509052311.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:52.285Z,1509052312.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:52.694Z,1509052312.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:53.089Z,1509052313.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:53.388Z,1509052313.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:53.484Z,1509052313.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:53.888Z,1509052313.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:54.193Z,1509052314.193 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:54.282Z,1509052314.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:54.689Z,1509052314.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:54.993Z,1509052314.993 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:55.089Z,1509052315.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:55.475Z,1509052315.475 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:55.503Z,1509052315.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:55.889Z,1509052315.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:56.273Z,1509052316.273 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:56.286Z,1509052316.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:56.678Z,1509052316.678 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:56.710Z,1509052316.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:57.109Z,1509052317.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:57.378Z,1509052317.378 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:57.490Z,1509052317.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:57.873Z,1509052317.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:58.176Z,1509052318.176 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:58.303Z,1509052318.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:58.580Z,1509052318.580 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:58.713Z,1509052318.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:59.102Z,1509052319.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:59.380Z,1509052319.380 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:59.520Z,1509052319.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:11:59.786Z,1509052319.786 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:11:59.889Z,1509052319.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:00.317Z,1509052320.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:00.571Z,1509052320.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:00.682Z,1509052320.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:01.210Z,1509052321.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:01.366Z,1509052321.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:01.571Z,1509052321.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:01.773Z,1509052321.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:01.972Z,1509052321.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:02.383Z,1509052322.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:02.566Z,1509052322.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:02.787Z,1509052322.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:03.195Z,1509052323.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:03.388Z,1509052323.388 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:03.570Z,1509052323.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:03.792Z,1509052323.792 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:03.969Z,1509052323.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:04.366Z,1509052324.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:04.585Z,1509052324.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:04.772Z,1509052324.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:05.196Z,1509052325.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:05.379Z,1509052325.379 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:05.586Z,1509052325.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:05.783Z,1509052325.783 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:05.979Z,1509052325.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:06.374Z,1509052326.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:06.577Z,1509052326.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:06.795Z,1509052326.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:07.205Z,1509052327.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:07.370Z,1509052327.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:07.570Z,1509052327.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:07.778Z,1509052327.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:07.937Z,1509052327.937 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:12:07.973Z,1509052327.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:08.380Z,1509052328.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:08.572Z,1509052328.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:08.776Z,1509052328.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:09.189Z,1509052329.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:09.371Z,1509052329.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:09.579Z,1509052329.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:09.773Z,1509052329.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:09.984Z,1509052329.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:10.374Z,1509052330.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:10.577Z,1509052330.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:10.791Z,1509052330.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:11.199Z,1509052331.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:11.376Z,1509052331.376 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:11.570Z,1509052331.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:11.782Z,1509052331.782 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:12.025Z,1509052332.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:12.388Z,1509052332.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:12.574Z,1509052332.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:12.778Z,1509052332.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:13.231Z,1509052333.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:13.367Z,1509052333.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:13.576Z,1509052333.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:13.774Z,1509052333.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:13.977Z,1509052333.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:14.403Z,1509052334.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:14.569Z,1509052334.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:14.768Z,1509052334.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:15.212Z,1509052335.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:15.368Z,1509052335.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:15.619Z,1509052335.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:15.775Z,1509052335.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:15.994Z,1509052335.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:16.382Z,1509052336.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:16.568Z,1509052336.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:16.784Z,1509052336.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:17.200Z,1509052337.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:17.373Z,1509052337.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:17.570Z,1509052337.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:17.778Z,1509052337.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:18.007Z,1509052338.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:18.405Z,1509052338.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:18.573Z,1509052338.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:18.770Z,1509052338.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:19.200Z,1509052339.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:19.364Z,1509052339.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:19.567Z,1509052339.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:19.988Z,1509052339.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:20.110Z,1509052340.110 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:20.379Z,1509052340.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:20.793Z,1509052340.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:20.907Z,1509052340.907 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:21.198Z,1509052341.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:21.412Z,1509052341.412 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:21.581Z,1509052341.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:21.971Z,1509052341.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:22.209Z,1509052342.209 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:22.370Z,1509052342.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:22.784Z,1509052342.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:23.006Z,1509052343.006 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:23.207Z,1509052343.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:23.423Z,1509052343.423 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:23.586Z,1509052343.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:23.978Z,1509052343.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:24.220Z,1509052344.220 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:24.389Z,1509052344.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:24.787Z,1509052344.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:25.018Z,1509052345.018 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:25.204Z,1509052345.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:25.422Z,1509052345.422 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:25.568Z,1509052345.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:25.970Z,1509052345.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:26.220Z,1509052346.220 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:26.418Z,1509052346.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:26.769Z,1509052346.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:27.017Z,1509052347.017 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:27.190Z,1509052347.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:27.433Z,1509052347.433 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:27.624Z,1509052347.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:27.966Z,1509052347.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:28.231Z,1509052348.231 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:28.385Z,1509052348.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:28.635Z,1509052348.635 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:28.801Z,1509052348.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:29.185Z,1509052349.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:29.428Z,1509052349.428 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:29.603Z,1509052349.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:29.833Z,1509052349.833 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:30.011Z,1509052350.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:30.394Z,1509052350.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:30.578Z,1509052350.578 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:30.773Z,1509052350.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:31.184Z,1509052351.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:31.372Z,1509052351.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:31.579Z,1509052351.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:31.780Z,1509052351.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:31.969Z,1509052351.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:32.387Z,1509052352.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:32.573Z,1509052352.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:32.777Z,1509052352.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:33.189Z,1509052353.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:33.368Z,1509052353.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:33.583Z,1509052353.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:33.775Z,1509052353.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:33.987Z,1509052353.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:34.387Z,1509052354.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:34.578Z,1509052354.578 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:34.765Z,1509052354.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:35.199Z,1509052355.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:35.374Z,1509052355.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:35.608Z,1509052355.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:35.778Z,1509052355.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:35.974Z,1509052355.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:36.381Z,1509052356.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:36.774Z,1509052356.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:37.188Z,1509052357.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:37.497Z,1509052357.497 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:37.571Z,1509052357.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:37.977Z,1509052357.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:38.294Z,1509052358.294 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:38.389Z,1509052358.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:38.698Z,1509052358.698 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:38.784Z,1509052358.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:39.189Z,1509052359.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:39.492Z,1509052359.492 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:39.570Z,1509052359.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:39.896Z,1509052359.896 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:39.969Z,1509052359.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:40.378Z,1509052360.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:40.569Z,1509052360.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:40.778Z,1509052360.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:41.197Z,1509052361.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:41.365Z,1509052361.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:41.580Z,1509052361.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:42.021Z,1509052362.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:42.116Z,1509052362.116 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:42.411Z,1509052362.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:42.568Z,1509052362.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:42.783Z,1509052362.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:43.223Z,1509052363.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:43.362Z,1509052363.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:43.578Z,1509052363.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:44.013Z,1509052364.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:44.107Z,1509052364.107 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:44.409Z,1509052364.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:44.572Z,1509052364.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:44.767Z,1509052364.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:45.195Z,1509052365.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:45.369Z,1509052365.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:45.594Z,1509052365.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:45.776Z,1509052365.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:45.972Z,1509052365.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:46.370Z,1509052366.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:46.571Z,1509052366.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:46.777Z,1509052366.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:47.189Z,1509052367.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:47.368Z,1509052367.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:47.593Z,1509052367.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:47.773Z,1509052367.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:47.992Z,1509052367.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:48.365Z,1509052368.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:48.566Z,1509052368.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:48.771Z,1509052368.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:49.190Z,1509052369.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:49.365Z,1509052369.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:49.600Z,1509052369.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:49.772Z,1509052369.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:49.978Z,1509052369.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:50.381Z,1509052370.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:50.570Z,1509052370.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:50.779Z,1509052370.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:51.230Z,1509052371.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:51.374Z,1509052371.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:51.585Z,1509052371.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:51.780Z,1509052371.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:51.986Z,1509052371.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:52.403Z,1509052372.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:52.764Z,1509052372.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:53.194Z,1509052373.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:53.392Z,1509052373.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:53.576Z,1509052373.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:53.979Z,1509052373.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:54.187Z,1509052374.187 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:54.382Z,1509052374.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:54.591Z,1509052374.591 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:54.781Z,1509052374.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:55.208Z,1509052375.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:55.379Z,1509052375.379 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:55.584Z,1509052375.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:55.987Z,1509052375.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:56.178Z,1509052376.178 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:56.409Z,1509052376.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:56.593Z,1509052376.593 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:56.819Z,1509052376.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:57.206Z,1509052377.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:57.375Z,1509052377.375 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:57.618Z,1509052377.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:57.977Z,1509052377.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:58.173Z,1509052378.173 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:58.399Z,1509052378.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:58.580Z,1509052378.580 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:58.799Z,1509052378.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:59.188Z,1509052379.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:59.370Z,1509052379.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:59.585Z,1509052379.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:12:59.776Z,1509052379.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:12:59.966Z,1509052379.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:00.370Z,1509052380.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:00.571Z,1509052380.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:00.775Z,1509052380.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:01.198Z,1509052381.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:01.362Z,1509052381.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:01.572Z,1509052381.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:01.766Z,1509052381.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:01.993Z,1509052381.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:02.379Z,1509052382.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:02.561Z,1509052382.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:02.778Z,1509052382.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:03.221Z,1509052383.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:03.357Z,1509052383.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:03.577Z,1509052383.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:03.763Z,1509052383.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:03.976Z,1509052383.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:04.365Z,1509052384.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:04.559Z,1509052384.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:04.770Z,1509052384.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:05.198Z,1509052385.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:05.360Z,1509052385.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:05.573Z,1509052385.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:05.764Z,1509052385.764 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:05.980Z,1509052385.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:06.372Z,1509052386.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:06.562Z,1509052386.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:06.777Z,1509052386.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:07.195Z,1509052387.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:07.360Z,1509052387.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:07.590Z,1509052387.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:07.764Z,1509052387.764 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:07.990Z,1509052387.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:08.329Z,1509052388.329 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:13:08.381Z,1509052388.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:08.561Z,1509052388.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:08.792Z,1509052388.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:08.978Z,1509052388.978 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:09.188Z,1509052389.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:09.394Z,1509052389.394 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:09.569Z,1509052389.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:09.993Z,1509052389.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:10.191Z,1509052390.191 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:10.372Z,1509052390.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:10.596Z,1509052390.596 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:10.811Z,1509052390.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:11.211Z,1509052391.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:11.389Z,1509052391.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:11.572Z,1509052391.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:11.794Z,1509052391.794 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:11.972Z,1509052391.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:12.409Z,1509052392.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:12.571Z,1509052392.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:12.778Z,1509052392.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:13.222Z,1509052393.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:13.367Z,1509052393.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:13.611Z,1509052393.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:13.777Z,1509052393.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:13.971Z,1509052393.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:14.393Z,1509052394.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:14.570Z,1509052394.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:14.780Z,1509052394.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:15.195Z,1509052395.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:15.375Z,1509052395.375 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:15.586Z,1509052395.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:15.780Z,1509052395.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:15.992Z,1509052395.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:16.379Z,1509052396.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:16.572Z,1509052396.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:16.776Z,1509052396.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:17.203Z,1509052397.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:17.363Z,1509052397.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:17.577Z,1509052397.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:17.767Z,1509052397.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:17.978Z,1509052397.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:18.511Z,1509052398.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:18.562Z,1509052398.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:19.005Z,1509052399.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:19.300Z,1509052399.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:19.358Z,1509052399.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:19.728Z,1509052399.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:19.764Z,1509052399.764 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:20.126Z,1509052400.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:20.506Z,1509052400.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:20.559Z,1509052400.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:20.904Z,1509052400.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:21.311Z,1509052401.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:21.370Z,1509052401.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:21.709Z,1509052401.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:21.777Z,1509052401.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:22.111Z,1509052402.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:22.528Z,1509052402.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:22.571Z,1509052402.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:22.898Z,1509052402.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:23.326Z,1509052403.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:23.369Z,1509052403.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:23.707Z,1509052403.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:23.776Z,1509052403.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:24.102Z,1509052404.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:24.532Z,1509052404.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:24.571Z,1509052404.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:24.979Z,1509052404.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:25.318Z,1509052405.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:25.367Z,1509052405.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:25.766Z,1509052405.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:25.773Z,1509052405.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:26.109Z,1509052406.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:26.535Z,1509052406.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:26.565Z,1509052406.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:26.915Z,1509052406.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:27.352Z,1509052407.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:27.362Z,1509052407.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:27.750Z,1509052407.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:27.769Z,1509052407.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:28.112Z,1509052408.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:28.518Z,1509052408.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:28.564Z,1509052408.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:28.907Z,1509052408.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:29.327Z,1509052409.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:29.362Z,1509052409.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:29.712Z,1509052409.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:29.778Z,1509052409.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:30.106Z,1509052410.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:30.522Z,1509052410.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:30.572Z,1509052410.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:30.985Z,1509052410.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:31.323Z,1509052411.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:31.365Z,1509052411.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:31.714Z,1509052411.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:31.769Z,1509052411.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:32.104Z,1509052412.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:32.563Z,1509052412.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:32.661Z,1509052412.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:33.064Z,1509052413.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:33.364Z,1509052413.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:33.463Z,1509052413.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:33.768Z,1509052413.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:33.867Z,1509052413.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:34.266Z,1509052414.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:34.562Z,1509052414.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:34.683Z,1509052414.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:35.091Z,1509052415.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:35.358Z,1509052415.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:35.481Z,1509052415.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:35.765Z,1509052415.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:35.885Z,1509052415.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:36.267Z,1509052416.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:36.560Z,1509052416.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:36.669Z,1509052416.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:37.083Z,1509052417.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:37.357Z,1509052417.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:37.481Z,1509052417.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:37.762Z,1509052417.762 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:37.864Z,1509052417.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:38.269Z,1509052418.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:38.559Z,1509052418.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:38.669Z,1509052418.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:39.101Z,1509052419.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:39.359Z,1509052419.359 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:39.504Z,1509052419.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:39.769Z,1509052419.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:39.924Z,1509052419.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:40.266Z,1509052420.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:40.568Z,1509052420.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:40.667Z,1509052420.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:41.109Z,1509052421.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:41.364Z,1509052421.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:41.478Z,1509052421.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:41.768Z,1509052421.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:41.890Z,1509052421.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:42.296Z,1509052422.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:42.562Z,1509052422.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:42.675Z,1509052422.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:43.108Z,1509052423.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:43.359Z,1509052423.359 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:43.470Z,1509052423.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:43.766Z,1509052423.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:43.867Z,1509052423.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:44.271Z,1509052424.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:44.561Z,1509052424.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:44.707Z,1509052424.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:45.071Z,1509052425.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:45.358Z,1509052425.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:45.475Z,1509052425.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:45.763Z,1509052425.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:45.887Z,1509052425.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:46.262Z,1509052426.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:46.560Z,1509052426.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:46.691Z,1509052426.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:47.087Z,1509052427.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:47.358Z,1509052427.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:47.460Z,1509052427.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:47.766Z,1509052427.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:47.859Z,1509052427.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:48.267Z,1509052428.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:48.570Z,1509052428.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:48.684Z,1509052428.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:49.074Z,1509052429.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:49.368Z,1509052429.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:49.461Z,1509052429.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:49.776Z,1509052429.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:49.866Z,1509052429.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:50.259Z,1509052430.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:50.570Z,1509052430.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:50.668Z,1509052430.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:51.095Z,1509052431.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:51.367Z,1509052431.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:51.474Z,1509052431.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:51.773Z,1509052431.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:51.881Z,1509052431.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:52.259Z,1509052432.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:52.571Z,1509052432.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:52.693Z,1509052432.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:53.098Z,1509052433.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:53.369Z,1509052433.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:53.469Z,1509052433.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:53.779Z,1509052433.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:53.888Z,1509052433.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:54.310Z,1509052434.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:54.575Z,1509052434.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:54.668Z,1509052434.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:55.075Z,1509052435.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:55.373Z,1509052435.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:55.512Z,1509052435.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:55.778Z,1509052435.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:55.899Z,1509052435.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:56.305Z,1509052436.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:56.572Z,1509052436.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:56.702Z,1509052436.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:57.097Z,1509052437.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:57.365Z,1509052437.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:57.468Z,1509052437.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:57.769Z,1509052437.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:57.880Z,1509052437.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:58.265Z,1509052438.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:58.567Z,1509052438.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:58.673Z,1509052438.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:59.171Z,1509052439.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:59.364Z,1509052439.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:59.484Z,1509052439.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:13:59.771Z,1509052439.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:13:59.922Z,1509052439.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:00.259Z,1509052440.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:00.566Z,1509052440.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:00.678Z,1509052440.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:01.079Z,1509052441.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:01.369Z,1509052441.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:01.518Z,1509052441.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:01.775Z,1509052441.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:01.870Z,1509052441.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:02.259Z,1509052442.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:02.569Z,1509052442.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:02.670Z,1509052442.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:03.072Z,1509052443.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:03.363Z,1509052443.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:03.474Z,1509052443.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:03.873Z,1509052443.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:04.075Z,1509052444.075 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:04.266Z,1509052444.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:04.580Z,1509052444.580 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:04.664Z,1509052444.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:05.071Z,1509052445.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:05.373Z,1509052445.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:05.462Z,1509052445.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:05.863Z,1509052445.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:06.074Z,1509052446.074 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:06.272Z,1509052446.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:06.575Z,1509052446.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:06.672Z,1509052446.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:07.093Z,1509052447.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:07.374Z,1509052447.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:07.472Z,1509052447.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:07.781Z,1509052447.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:07.863Z,1509052447.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:08.216Z,1509052448.216 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:14:08.268Z,1509052448.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:08.570Z,1509052448.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:08.732Z,1509052448.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:09.085Z,1509052449.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:09.369Z,1509052449.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:09.465Z,1509052449.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:09.776Z,1509052449.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:09.910Z,1509052449.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:10.279Z,1509052450.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:10.569Z,1509052450.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:10.708Z,1509052450.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:11.112Z,1509052451.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:11.366Z,1509052451.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:11.465Z,1509052451.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:11.771Z,1509052451.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:11.876Z,1509052451.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:12.274Z,1509052452.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:12.567Z,1509052452.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:12.711Z,1509052452.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:13.173Z,1509052453.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:13.366Z,1509052453.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:13.481Z,1509052453.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:13.770Z,1509052453.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:13.864Z,1509052453.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:14.254Z,1509052454.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:14.563Z,1509052454.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:14.666Z,1509052454.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:15.061Z,1509052455.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:15.361Z,1509052455.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:15.469Z,1509052455.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:15.768Z,1509052455.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:15.868Z,1509052455.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:16.285Z,1509052456.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:16.566Z,1509052456.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:16.713Z,1509052456.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:17.070Z,1509052457.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:17.372Z,1509052457.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:17.502Z,1509052457.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:18.055Z,1509052458.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:18.073Z,1509052458.073 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:18.460Z,1509052458.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:18.576Z,1509052458.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:18.861Z,1509052458.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:19.270Z,1509052459.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:19.367Z,1509052459.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:19.733Z,1509052459.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:20.055Z,1509052460.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:20.150Z,1509052460.150 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:20.453Z,1509052460.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:20.571Z,1509052460.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:20.863Z,1509052460.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:20.978Z,1509052460.978 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T21:14:21.270Z,1509052461.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:21.370Z,1509052461.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:21.670Z,1509052461.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:21.777Z,1509052461.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:22.049Z,1509052462.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:22.470Z,1509052462.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:22.576Z,1509052462.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:22.902Z,1509052462.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:23.310Z,1509052463.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:23.382Z,1509052463.382 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:23.657Z,1509052463.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:23.789Z,1509052463.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:24.053Z,1509052464.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:24.497Z,1509052464.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:24.571Z,1509052464.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:24.869Z,1509052464.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:25.281Z,1509052465.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:25.365Z,1509052465.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:25.691Z,1509052465.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:25.773Z,1509052465.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:26.052Z,1509052466.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:26.449Z,1509052466.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:26.566Z,1509052466.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:26.853Z,1509052466.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:27.257Z,1509052467.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:27.364Z,1509052467.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:27.677Z,1509052467.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:27.768Z,1509052467.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:28.057Z,1509052468.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:28.458Z,1509052468.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:28.567Z,1509052468.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:28.869Z,1509052468.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:29.270Z,1509052469.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:29.367Z,1509052469.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:29.645Z,1509052469.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:29.771Z,1509052469.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:30.053Z,1509052470.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:30.457Z,1509052470.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:30.568Z,1509052470.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:30.854Z,1509052470.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:31.259Z,1509052471.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:31.366Z,1509052471.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:31.730Z,1509052471.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:31.772Z,1509052471.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:32.121Z,1509052472.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:32.524Z,1509052472.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:32.567Z,1509052472.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:32.924Z,1509052472.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:33.335Z,1509052473.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:33.370Z,1509052473.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:33.727Z,1509052473.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:33.778Z,1509052473.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:34.118Z,1509052474.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:34.525Z,1509052474.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:35.010Z,1509052475.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:35.319Z,1509052475.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:35.428Z,1509052475.428 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:35.720Z,1509052475.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:36.121Z,1509052476.121 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:36.121Z,1509052476.121 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 29
2017-10-26T21:14:36.121Z,1509052476.121 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:14:36.125Z,1509052476.125 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:36.125Z,1509052476.125 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 29
2017-10-26T21:14:36.125Z,1509052476.125 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:14:36.184Z,1509052476.184 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:14:36.184Z,1509052476.184 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:14:36.225Z,1509052476.225 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:36.631Z,1509052476.631 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:36.654Z,1509052476.654 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:14:36.654Z,1509052476.654 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 29
2017-10-26T21:14:36.654Z,1509052476.654 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:14:36.654Z,1509052476.654 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 29
2017-10-26T21:14:36.000Z,1509052477.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:14:37.000Z,1509052477.000 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:14:37.000Z,1509052477.000 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:14:37.007Z,1509052477.007 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:14:37.008Z,1509052477.008 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:14:37.008Z,1509052477.008 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:14:37.322Z,1509052477.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:37.415Z,1509052477.415 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:37.763Z,1509052477.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:38.186Z,1509052478.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:38.212Z,1509052478.212 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:38.529Z,1509052478.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:38.617Z,1509052478.617 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:38.998Z,1509052478.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:39.360Z,1509052479.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:39.410Z,1509052479.410 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:39.723Z,1509052479.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:39.814Z,1509052479.814 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:40.188Z,1509052480.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:40.544Z,1509052480.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:40.572Z,1509052480.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:40.959Z,1509052480.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:41.316Z,1509052481.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:41.367Z,1509052481.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:41.721Z,1509052481.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:41.777Z,1509052481.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:42.114Z,1509052482.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:42.520Z,1509052482.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:42.571Z,1509052482.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:42.927Z,1509052482.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:43.310Z,1509052483.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:43.364Z,1509052483.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:43.750Z,1509052483.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:43.770Z,1509052483.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:44.119Z,1509052484.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:44.516Z,1509052484.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:44.563Z,1509052484.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:44.921Z,1509052484.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:45.329Z,1509052485.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:45.363Z,1509052485.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:45.744Z,1509052485.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:45.768Z,1509052485.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:46.151Z,1509052486.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:46.521Z,1509052486.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:46.563Z,1509052486.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:47.009Z,1509052487.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:47.318Z,1509052487.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:47.358Z,1509052487.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:47.732Z,1509052487.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:47.764Z,1509052487.764 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:48.144Z,1509052488.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:48.507Z,1509052488.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:48.560Z,1509052488.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:49.004Z,1509052489.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:49.312Z,1509052489.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:49.361Z,1509052489.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:49.722Z,1509052489.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:49.771Z,1509052489.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:50.122Z,1509052490.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:50.522Z,1509052490.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:50.567Z,1509052490.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:50.979Z,1509052490.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:51.327Z,1509052491.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:51.364Z,1509052491.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:51.719Z,1509052491.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:51.769Z,1509052491.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:52.122Z,1509052492.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:52.572Z,1509052492.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:52.588Z,1509052492.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:53.013Z,1509052493.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:53.319Z,1509052493.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:53.368Z,1509052493.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:53.760Z,1509052493.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:53.773Z,1509052493.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:54.123Z,1509052494.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:54.540Z,1509052494.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:54.569Z,1509052494.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:55.178Z,1509052495.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:55.366Z,1509052495.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:55.529Z,1509052495.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:55.772Z,1509052495.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:55.937Z,1509052495.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:56.310Z,1509052496.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:56.572Z,1509052496.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:56.713Z,1509052496.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:57.113Z,1509052497.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:57.371Z,1509052497.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:57.518Z,1509052497.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:57.779Z,1509052497.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:57.924Z,1509052497.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:58.322Z,1509052498.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:58.705Z,1509052498.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:59.109Z,1509052499.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:59.437Z,1509052499.437 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:14:59.517Z,1509052499.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:14:59.906Z,1509052499.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:00.234Z,1509052500.234 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:00.323Z,1509052500.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:00.639Z,1509052500.639 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:00.714Z,1509052500.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:01.120Z,1509052501.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:01.386Z,1509052501.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:01.528Z,1509052501.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:01.899Z,1509052501.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:02.181Z,1509052502.181 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:02.337Z,1509052502.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:02.586Z,1509052502.586 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:02.712Z,1509052502.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:03.112Z,1509052503.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:03.382Z,1509052503.382 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:03.509Z,1509052503.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:03.788Z,1509052503.788 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:03.908Z,1509052503.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:04.319Z,1509052504.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:04.569Z,1509052504.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:04.714Z,1509052504.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:05.126Z,1509052505.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:05.369Z,1509052505.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:05.515Z,1509052505.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:05.775Z,1509052505.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:05.934Z,1509052505.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:06.308Z,1509052506.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:06.574Z,1509052506.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:06.712Z,1509052506.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:07.199Z,1509052507.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:07.369Z,1509052507.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:07.560Z,1509052507.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:07.774Z,1509052507.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:07.913Z,1509052507.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:08.355Z,1509052508.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:08.572Z,1509052508.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:08.659Z,1509052508.659 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:15:08.722Z,1509052508.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:09.144Z,1509052509.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:09.368Z,1509052509.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:09.546Z,1509052509.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:09.776Z,1509052509.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:09.908Z,1509052509.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:10.311Z,1509052510.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:10.574Z,1509052510.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:10.708Z,1509052510.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:11.107Z,1509052511.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:11.367Z,1509052511.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:11.519Z,1509052511.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:11.773Z,1509052511.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:11.913Z,1509052511.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:12.320Z,1509052512.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:12.565Z,1509052512.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:12.718Z,1509052512.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:13.186Z,1509052513.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:13.365Z,1509052513.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:13.512Z,1509052513.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:13.775Z,1509052513.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:13.910Z,1509052513.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:14.311Z,1509052514.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:14.569Z,1509052514.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:14.716Z,1509052514.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:15.111Z,1509052515.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:15.363Z,1509052515.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:15.520Z,1509052515.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:15.766Z,1509052515.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:15.918Z,1509052515.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:16.315Z,1509052516.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:16.559Z,1509052516.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:16.714Z,1509052516.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:17.115Z,1509052517.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:17.357Z,1509052517.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:17.513Z,1509052517.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:17.761Z,1509052517.761 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:17.918Z,1509052517.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:18.318Z,1509052518.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:18.557Z,1509052518.557 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:18.721Z,1509052518.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:19.100Z,1509052519.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:19.352Z,1509052519.352 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:19.530Z,1509052519.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:19.756Z,1509052519.756 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:19.917Z,1509052519.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:20.325Z,1509052520.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:20.550Z,1509052520.550 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:20.707Z,1509052520.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:21.097Z,1509052521.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:21.347Z,1509052521.347 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:21.686Z,1509052521.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:21.753Z,1509052521.753 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:22.046Z,1509052522.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:22.446Z,1509052522.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:22.549Z,1509052522.549 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:22.850Z,1509052522.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:23.244Z,1509052523.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:23.352Z,1509052523.352 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:23.638Z,1509052523.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:23.759Z,1509052523.759 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:24.047Z,1509052524.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:24.449Z,1509052524.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:24.556Z,1509052524.556 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:24.836Z,1509052524.836 [BPC1](ERROR): Failed to receive battery data
2017-10-26T21:15:24.836Z,1509052524.836 [BPC1] Communications Fault, FailCount= 1
2017-10-26T21:15:24.836Z,1509052524.836 [BPC1](ERROR): Communications Fault
2017-10-26T21:15:24.846Z,1509052524.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:24.964Z,1509052524.964 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T21:15:25.242Z,1509052525.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:25.353Z,1509052525.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:25.652Z,1509052525.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:25.758Z,1509052525.758 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:26.060Z,1509052526.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:26.178Z,1509052526.178 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:15:26.178Z,1509052526.178 [BPC1] No Fault, FailCount= 1
2017-10-26T21:15:26.505Z,1509052526.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:26.558Z,1509052526.558 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:26.855Z,1509052526.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:26.964Z,1509052526.964 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:27.237Z,1509052527.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:27.408Z,1509052527.408 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:27.642Z,1509052527.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:28.044Z,1509052528.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:28.206Z,1509052528.206 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:28.457Z,1509052528.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:28.610Z,1509052528.610 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:28.851Z,1509052528.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:29.254Z,1509052529.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:29.404Z,1509052529.404 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:29.650Z,1509052529.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:29.808Z,1509052529.808 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:30.032Z,1509052530.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:30.441Z,1509052530.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:30.569Z,1509052530.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:30.852Z,1509052530.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:31.257Z,1509052531.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:31.367Z,1509052531.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:31.642Z,1509052531.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:31.771Z,1509052531.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:32.051Z,1509052532.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:32.452Z,1509052532.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:32.567Z,1509052532.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:32.833Z,1509052532.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:33.240Z,1509052533.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:33.366Z,1509052533.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:33.640Z,1509052533.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:33.770Z,1509052533.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:34.045Z,1509052534.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:34.441Z,1509052534.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:34.564Z,1509052534.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:34.845Z,1509052534.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:35.345Z,1509052535.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:35.361Z,1509052535.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:35.767Z,1509052535.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:35.786Z,1509052535.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:36.183Z,1509052536.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:36.538Z,1509052536.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:36.559Z,1509052536.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:37.042Z,1509052537.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:37.356Z,1509052537.356 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:37.392Z,1509052537.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:37.762Z,1509052537.762 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:37.777Z,1509052537.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:38.204Z,1509052538.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:38.557Z,1509052538.557 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:38.565Z,1509052538.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:39.010Z,1509052539.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:39.357Z,1509052539.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:39.389Z,1509052539.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:39.748Z,1509052539.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:39.764Z,1509052539.764 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:40.194Z,1509052540.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:40.564Z,1509052540.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:40.586Z,1509052540.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:41.043Z,1509052541.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:41.362Z,1509052541.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:41.368Z,1509052541.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:41.760Z,1509052541.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:41.767Z,1509052541.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:42.241Z,1509052542.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:42.564Z,1509052542.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:42.590Z,1509052542.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:43.034Z,1509052543.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:43.361Z,1509052543.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:43.403Z,1509052543.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:43.767Z,1509052543.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:43.786Z,1509052543.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:44.213Z,1509052544.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:44.568Z,1509052544.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:44.613Z,1509052544.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:45.033Z,1509052545.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:45.366Z,1509052545.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:45.379Z,1509052545.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:45.777Z,1509052545.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:45.795Z,1509052545.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:46.200Z,1509052546.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:46.570Z,1509052546.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:46.584Z,1509052546.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:47.047Z,1509052547.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:47.363Z,1509052547.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:47.382Z,1509052547.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:47.759Z,1509052547.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:47.768Z,1509052547.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:48.198Z,1509052548.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:48.561Z,1509052548.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:48.560Z,1509052548.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:49.030Z,1509052549.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:49.362Z,1509052549.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:49.357Z,1509052549.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:49.750Z,1509052549.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:49.767Z,1509052549.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:50.197Z,1509052550.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:50.564Z,1509052550.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:50.568Z,1509052550.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:51.042Z,1509052551.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:51.361Z,1509052551.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:51.391Z,1509052551.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:51.759Z,1509052551.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:51.768Z,1509052551.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:52.205Z,1509052552.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:52.563Z,1509052552.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:52.574Z,1509052552.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:53.056Z,1509052553.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:53.371Z,1509052553.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:53.384Z,1509052553.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:53.777Z,1509052553.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:53.784Z,1509052553.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:54.209Z,1509052554.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:54.566Z,1509052554.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:54.571Z,1509052554.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:55.009Z,1509052555.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:55.372Z,1509052555.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:55.614Z,1509052555.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:55.778Z,1509052555.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:55.974Z,1509052555.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:56.367Z,1509052556.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:56.572Z,1509052556.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:56.812Z,1509052556.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:57.181Z,1509052557.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:57.367Z,1509052557.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:57.573Z,1509052557.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:57.772Z,1509052557.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:57.997Z,1509052557.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:58.361Z,1509052558.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:58.565Z,1509052558.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:58.780Z,1509052558.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:59.216Z,1509052559.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:59.362Z,1509052559.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:59.569Z,1509052559.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:15:59.769Z,1509052559.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:15:59.961Z,1509052559.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:00.369Z,1509052560.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:00.560Z,1509052560.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:00.807Z,1509052560.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:01.211Z,1509052561.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:01.357Z,1509052561.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:01.568Z,1509052561.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:01.763Z,1509052561.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:01.967Z,1509052561.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:02.385Z,1509052562.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:02.559Z,1509052562.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:02.762Z,1509052562.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:03.188Z,1509052563.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:03.358Z,1509052563.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:03.569Z,1509052563.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:03.769Z,1509052563.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:03.968Z,1509052563.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:04.366Z,1509052564.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:04.563Z,1509052564.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:04.778Z,1509052564.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:04.971Z,1509052564.971 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:05.194Z,1509052565.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:05.389Z,1509052565.389 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:05.560Z,1509052565.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:05.955Z,1509052565.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:06.185Z,1509052566.185 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:06.359Z,1509052566.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:06.589Z,1509052566.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:06.768Z,1509052566.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:07.203Z,1509052567.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:07.386Z,1509052567.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:07.581Z,1509052567.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:07.791Z,1509052567.791 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:08.011Z,1509052568.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:08.367Z,1509052568.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:08.568Z,1509052568.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:08.717Z,1509052568.717 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:16:08.773Z,1509052568.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:09.196Z,1509052569.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:09.361Z,1509052569.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:09.596Z,1509052569.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:09.770Z,1509052569.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:09.966Z,1509052569.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:10.355Z,1509052570.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:10.563Z,1509052570.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:10.755Z,1509052570.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:11.203Z,1509052571.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:11.363Z,1509052571.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:11.614Z,1509052571.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:11.769Z,1509052571.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:11.964Z,1509052571.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:12.401Z,1509052572.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:12.565Z,1509052572.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:12.768Z,1509052572.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:13.225Z,1509052573.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:13.368Z,1509052573.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:13.623Z,1509052573.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:13.774Z,1509052573.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:13.972Z,1509052573.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:14.374Z,1509052574.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:14.569Z,1509052574.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:14.790Z,1509052574.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:15.161Z,1509052575.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:15.367Z,1509052575.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:15.573Z,1509052575.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:15.773Z,1509052575.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:15.966Z,1509052575.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:16.387Z,1509052576.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:16.569Z,1509052576.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:16.766Z,1509052576.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:17.195Z,1509052577.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:17.374Z,1509052577.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:17.575Z,1509052577.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:17.779Z,1509052577.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:17.976Z,1509052577.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:18.376Z,1509052578.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:18.758Z,1509052578.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:19.189Z,1509052579.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:19.429Z,1509052579.429 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:19.566Z,1509052579.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:19.962Z,1509052579.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:20.226Z,1509052580.226 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:20.383Z,1509052580.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:20.765Z,1509052580.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:21.024Z,1509052581.024 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:21.192Z,1509052581.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:21.428Z,1509052581.428 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:21.581Z,1509052581.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:21.977Z,1509052581.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:22.225Z,1509052582.225 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:22.382Z,1509052582.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:22.631Z,1509052582.631 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:22.772Z,1509052582.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:23.185Z,1509052583.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:23.423Z,1509052583.423 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:23.588Z,1509052583.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:23.828Z,1509052583.828 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:23.967Z,1509052583.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:24.429Z,1509052584.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:24.569Z,1509052584.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:24.776Z,1509052584.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:25.182Z,1509052585.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:25.364Z,1509052585.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:25.593Z,1509052585.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:25.775Z,1509052585.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:25.958Z,1509052585.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:26.377Z,1509052586.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:26.568Z,1509052586.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:26.783Z,1509052586.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:27.186Z,1509052587.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:27.363Z,1509052587.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:27.662Z,1509052587.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:27.997Z,1509052587.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:28.114Z,1509052588.114 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:28.373Z,1509052588.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:28.572Z,1509052588.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:28.771Z,1509052588.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:29.190Z,1509052589.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:29.364Z,1509052589.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:29.570Z,1509052589.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:29.968Z,1509052589.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:30.102Z,1509052590.102 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:30.375Z,1509052590.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:30.575Z,1509052590.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:30.769Z,1509052590.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:31.195Z,1509052591.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:31.372Z,1509052591.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:31.580Z,1509052591.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:31.780Z,1509052591.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:31.974Z,1509052591.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:32.355Z,1509052592.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:32.570Z,1509052592.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:32.754Z,1509052592.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:33.185Z,1509052593.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:33.365Z,1509052593.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:33.588Z,1509052593.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:33.779Z,1509052593.779 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:33.973Z,1509052593.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:34.368Z,1509052594.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:34.568Z,1509052594.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:34.769Z,1509052594.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:35.182Z,1509052595.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:35.363Z,1509052595.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:35.576Z,1509052595.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:35.766Z,1509052595.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:35.985Z,1509052595.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:36.355Z,1509052596.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:36.560Z,1509052596.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:36.757Z,1509052596.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:37.186Z,1509052597.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:37.361Z,1509052597.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:37.561Z,1509052597.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:37.766Z,1509052597.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:37.962Z,1509052597.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:38.369Z,1509052598.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:38.561Z,1509052598.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:38.821Z,1509052598.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:39.170Z,1509052599.170 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T21:16:39.170Z,1509052599.170 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:16:39.170Z,1509052599.170 [BPC1](ERROR): Data Fault
2017-10-26T21:16:39.179Z,1509052599.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:39.298Z,1509052599.298 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:16:39.356Z,1509052599.356 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:39.584Z,1509052599.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:39.761Z,1509052599.761 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:39.974Z,1509052599.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:40.378Z,1509052600.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:40.498Z,1509052600.498 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:16:40.499Z,1509052600.499 [BPC1] No Fault, FailCount= 1
2017-10-26T21:16:40.562Z,1509052600.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:40.837Z,1509052600.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:41.194Z,1509052601.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:41.359Z,1509052601.359 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:41.564Z,1509052601.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:41.764Z,1509052601.764 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:41.976Z,1509052601.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:42.373Z,1509052602.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:42.561Z,1509052602.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:42.778Z,1509052602.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:43.189Z,1509052603.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:43.360Z,1509052603.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:43.567Z,1509052603.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:43.771Z,1509052603.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:43.975Z,1509052603.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:44.520Z,1509052604.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:44.566Z,1509052604.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:44.999Z,1509052604.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:45.329Z,1509052605.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:45.365Z,1509052605.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:45.731Z,1509052605.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:45.770Z,1509052605.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:46.149Z,1509052606.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:46.509Z,1509052606.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:46.568Z,1509052606.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:46.919Z,1509052606.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:47.325Z,1509052607.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:47.365Z,1509052607.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:47.722Z,1509052607.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:47.772Z,1509052607.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:48.126Z,1509052608.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:48.524Z,1509052608.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:48.571Z,1509052608.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:48.994Z,1509052608.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:49.315Z,1509052609.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:49.365Z,1509052609.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:49.728Z,1509052609.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:49.772Z,1509052609.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:50.122Z,1509052610.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:50.521Z,1509052610.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:50.569Z,1509052610.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:51.022Z,1509052611.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:51.344Z,1509052611.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:51.363Z,1509052611.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:51.715Z,1509052611.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:51.768Z,1509052611.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:52.117Z,1509052612.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:52.571Z,1509052612.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:52.584Z,1509052612.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:53.008Z,1509052613.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:53.347Z,1509052613.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:53.370Z,1509052613.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:53.768Z,1509052613.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:53.777Z,1509052613.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:54.121Z,1509052614.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:54.571Z,1509052614.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:54.575Z,1509052614.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:54.989Z,1509052614.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:55.346Z,1509052615.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:55.369Z,1509052615.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:55.748Z,1509052615.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:55.773Z,1509052615.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:56.170Z,1509052616.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:56.529Z,1509052616.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:56.572Z,1509052616.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:57.065Z,1509052617.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:57.322Z,1509052617.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:57.374Z,1509052617.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:57.724Z,1509052617.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:57.781Z,1509052617.781 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:58.166Z,1509052618.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:58.671Z,1509052618.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:59.117Z,1509052619.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:59.478Z,1509052619.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:16:59.487Z,1509052619.487 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:16:59.902Z,1509052619.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:00.284Z,1509052620.284 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:00.328Z,1509052620.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:00.672Z,1509052620.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:00.689Z,1509052620.689 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:01.126Z,1509052621.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:01.482Z,1509052621.482 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:01.495Z,1509052621.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:01.895Z,1509052621.895 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:01.912Z,1509052621.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:02.285Z,1509052622.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:02.576Z,1509052622.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:02.677Z,1509052622.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:03.091Z,1509052623.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:03.369Z,1509052623.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:03.469Z,1509052623.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:03.774Z,1509052623.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:03.878Z,1509052623.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:04.263Z,1509052624.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:04.574Z,1509052624.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:04.688Z,1509052624.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:05.091Z,1509052625.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:05.370Z,1509052625.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:05.498Z,1509052625.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:05.777Z,1509052625.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:05.919Z,1509052625.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:06.284Z,1509052626.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:06.570Z,1509052626.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:06.685Z,1509052626.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:07.168Z,1509052627.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:07.363Z,1509052627.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:07.481Z,1509052627.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:07.768Z,1509052627.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:07.927Z,1509052627.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:08.286Z,1509052628.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:08.567Z,1509052628.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:08.677Z,1509052628.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:09.034Z,1509052629.034 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:17:09.129Z,1509052629.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:09.363Z,1509052629.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:09.488Z,1509052629.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:09.768Z,1509052629.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:09.909Z,1509052629.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:10.326Z,1509052630.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:10.562Z,1509052630.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:10.673Z,1509052630.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:11.076Z,1509052631.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:11.358Z,1509052631.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:11.486Z,1509052631.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:11.770Z,1509052631.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:11.893Z,1509052631.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:12.307Z,1509052632.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:12.563Z,1509052632.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:12.694Z,1509052632.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:13.109Z,1509052633.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:13.366Z,1509052633.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:13.511Z,1509052633.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:13.883Z,1509052633.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:14.090Z,1509052634.090 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:14.298Z,1509052634.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:14.567Z,1509052634.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:14.677Z,1509052634.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:15.078Z,1509052635.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:15.364Z,1509052635.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:15.481Z,1509052635.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:15.768Z,1509052635.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:15.878Z,1509052635.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:16.284Z,1509052636.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:16.562Z,1509052636.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:16.676Z,1509052636.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:17.109Z,1509052637.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:17.363Z,1509052637.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:17.473Z,1509052637.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:17.767Z,1509052637.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:17.908Z,1509052637.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:18.283Z,1509052638.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:18.565Z,1509052638.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:18.728Z,1509052638.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:18.972Z,1509052638.972 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:19.103Z,1509052639.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:19.489Z,1509052639.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:19.514Z,1509052639.514 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:19.883Z,1509052639.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:20.290Z,1509052640.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:20.312Z,1509052640.312 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:20.707Z,1509052640.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:20.716Z,1509052640.716 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:21.195Z,1509052641.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:21.490Z,1509052641.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:21.511Z,1509052641.511 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:21.884Z,1509052641.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:21.927Z,1509052641.927 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:22.272Z,1509052642.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:22.567Z,1509052642.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:22.714Z,1509052642.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:23.072Z,1509052643.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:23.362Z,1509052643.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:23.523Z,1509052643.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:23.769Z,1509052643.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:23.877Z,1509052643.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:24.299Z,1509052644.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:24.563Z,1509052644.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:24.716Z,1509052644.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:25.080Z,1509052645.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:25.359Z,1509052645.359 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:25.485Z,1509052645.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:25.886Z,1509052645.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:26.072Z,1509052646.072 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:26.303Z,1509052646.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:26.673Z,1509052646.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:26.870Z,1509052646.870 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:27.086Z,1509052647.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:27.485Z,1509052647.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:27.567Z,1509052647.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:27.890Z,1509052647.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:28.294Z,1509052648.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:28.569Z,1509052648.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:28.699Z,1509052648.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:29.098Z,1509052649.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:29.368Z,1509052649.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:29.478Z,1509052649.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:29.774Z,1509052649.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:29.912Z,1509052649.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:30.313Z,1509052650.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:30.567Z,1509052650.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:30.689Z,1509052650.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:31.091Z,1509052651.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:31.362Z,1509052651.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:31.488Z,1509052651.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:31.765Z,1509052651.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:31.890Z,1509052651.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:32.289Z,1509052652.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:32.558Z,1509052652.558 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:32.685Z,1509052652.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:33.105Z,1509052653.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:33.360Z,1509052653.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:33.480Z,1509052653.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:33.764Z,1509052653.764 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:33.926Z,1509052653.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:34.273Z,1509052654.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:34.560Z,1509052654.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:34.688Z,1509052654.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:35.091Z,1509052655.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:35.360Z,1509052655.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:35.557Z,1509052655.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:35.765Z,1509052655.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:35.892Z,1509052655.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:36.275Z,1509052656.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:36.561Z,1509052656.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:36.670Z,1509052656.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:37.103Z,1509052657.103 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:37.103Z,1509052657.103 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 30
2017-10-26T21:17:37.104Z,1509052657.104 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:17:37.112Z,1509052657.112 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:37.112Z,1509052657.112 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 30
2017-10-26T21:17:37.112Z,1509052657.112 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:17:37.231Z,1509052657.231 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:17:37.231Z,1509052657.231 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:17:37.358Z,1509052657.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:37.603Z,1509052657.603 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:17:37.603Z,1509052657.603 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 30
2017-10-26T21:17:37.604Z,1509052657.604 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:17:37.604Z,1509052657.604 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 30
2017-10-26T21:17:37.763Z,1509052657.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:37.877Z,1509052657.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:17:37.877Z,1509052657.877 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:17:37.878Z,1509052657.878 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:17:37.880Z,1509052657.880 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:17:37.881Z,1509052657.881 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:17:37.881Z,1509052657.881 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:17:38.310Z,1509052658.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:38.556Z,1509052658.556 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:38.685Z,1509052658.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:39.107Z,1509052659.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:39.355Z,1509052659.355 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:39.540Z,1509052659.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:39.762Z,1509052659.762 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:39.892Z,1509052659.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:40.269Z,1509052660.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:40.559Z,1509052660.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:40.673Z,1509052660.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:40.964Z,1509052660.964 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:41.081Z,1509052661.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:41.380Z,1509052661.380 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:41.482Z,1509052661.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:41.891Z,1509052661.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:42.177Z,1509052662.177 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:42.265Z,1509052662.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:42.582Z,1509052662.582 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:42.696Z,1509052662.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:43.091Z,1509052663.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:43.377Z,1509052663.377 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:43.486Z,1509052663.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:43.910Z,1509052663.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:44.173Z,1509052664.173 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:44.267Z,1509052664.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:44.577Z,1509052664.577 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:44.670Z,1509052664.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:45.098Z,1509052665.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:45.372Z,1509052665.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:45.486Z,1509052665.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:45.775Z,1509052665.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:45.875Z,1509052665.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:46.286Z,1509052666.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:46.568Z,1509052666.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:46.709Z,1509052666.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:47.092Z,1509052667.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:47.363Z,1509052667.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:47.475Z,1509052667.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:47.766Z,1509052667.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:47.877Z,1509052667.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:48.275Z,1509052668.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:48.559Z,1509052668.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:48.682Z,1509052668.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:49.085Z,1509052669.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:49.361Z,1509052669.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:49.493Z,1509052669.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:49.765Z,1509052669.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:49.881Z,1509052669.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:50.317Z,1509052670.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:50.560Z,1509052670.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:50.717Z,1509052670.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:51.089Z,1509052671.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:51.356Z,1509052671.356 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:51.526Z,1509052671.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:51.760Z,1509052671.760 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:51.884Z,1509052671.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:52.328Z,1509052672.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:52.564Z,1509052672.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:52.685Z,1509052672.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:53.128Z,1509052673.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:53.359Z,1509052673.359 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:53.505Z,1509052673.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:53.763Z,1509052673.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:53.893Z,1509052673.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:54.295Z,1509052674.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:54.561Z,1509052674.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:54.668Z,1509052674.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:55.068Z,1509052675.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:55.367Z,1509052675.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:55.475Z,1509052675.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:55.770Z,1509052675.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:55.881Z,1509052675.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:56.290Z,1509052676.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:56.566Z,1509052676.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:56.681Z,1509052676.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:56.977Z,1509052676.977 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:57.091Z,1509052677.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:57.393Z,1509052677.393 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:57.485Z,1509052677.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:57.873Z,1509052677.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:58.190Z,1509052678.190 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:58.274Z,1509052678.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:58.595Z,1509052678.595 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:58.678Z,1509052678.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:59.074Z,1509052679.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:59.380Z,1509052679.380 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:17:59.507Z,1509052679.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:17:59.875Z,1509052679.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:00.178Z,1509052680.178 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:00.279Z,1509052680.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:00.583Z,1509052680.583 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:00.680Z,1509052680.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:01.086Z,1509052681.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:01.379Z,1509052681.379 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:01.485Z,1509052681.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:01.784Z,1509052681.784 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:01.905Z,1509052681.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:02.297Z,1509052682.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:02.569Z,1509052682.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:02.676Z,1509052682.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:03.100Z,1509052683.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:03.363Z,1509052683.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:03.523Z,1509052683.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:03.767Z,1509052683.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:03.901Z,1509052683.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:04.290Z,1509052684.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:04.561Z,1509052684.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:04.679Z,1509052684.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:05.283Z,1509052685.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:05.362Z,1509052685.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:05.688Z,1509052685.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:05.766Z,1509052685.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:06.051Z,1509052686.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:06.458Z,1509052686.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:06.561Z,1509052686.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:06.886Z,1509052686.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:07.297Z,1509052687.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:07.357Z,1509052687.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:07.700Z,1509052687.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:07.761Z,1509052687.761 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:08.107Z,1509052688.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:08.473Z,1509052688.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:08.558Z,1509052688.558 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:08.878Z,1509052688.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:09.236Z,1509052689.236 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:18:09.300Z,1509052689.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:09.356Z,1509052689.356 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:09.684Z,1509052689.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:09.765Z,1509052689.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:10.086Z,1509052690.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:10.494Z,1509052690.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:10.563Z,1509052690.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:10.879Z,1509052690.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:11.283Z,1509052691.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:11.364Z,1509052691.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:11.682Z,1509052691.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:11.767Z,1509052691.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:12.091Z,1509052692.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:12.486Z,1509052692.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:12.561Z,1509052692.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:12.864Z,1509052692.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:13.298Z,1509052693.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:13.366Z,1509052693.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:13.678Z,1509052693.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:13.771Z,1509052693.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:14.073Z,1509052694.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:14.479Z,1509052694.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:14.568Z,1509052694.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:14.880Z,1509052694.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:15.267Z,1509052695.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:15.366Z,1509052695.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:15.671Z,1509052695.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:15.772Z,1509052695.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:16.072Z,1509052696.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:16.504Z,1509052696.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:16.567Z,1509052696.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:16.873Z,1509052696.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:17.275Z,1509052697.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:17.366Z,1509052697.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:17.694Z,1509052697.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:17.777Z,1509052697.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:18.065Z,1509052698.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:18.491Z,1509052698.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:18.574Z,1509052698.574 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:18.875Z,1509052698.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:19.281Z,1509052699.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:19.367Z,1509052699.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:19.680Z,1509052699.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:19.772Z,1509052699.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:20.127Z,1509052700.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:20.538Z,1509052700.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:20.566Z,1509052700.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:20.880Z,1509052700.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:21.281Z,1509052701.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:21.366Z,1509052701.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:21.771Z,1509052701.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:21.867Z,1509052701.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:22.240Z,1509052702.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:22.568Z,1509052702.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:22.657Z,1509052702.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:23.095Z,1509052703.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:23.365Z,1509052703.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:23.440Z,1509052703.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:23.772Z,1509052703.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:23.844Z,1509052703.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:24.220Z,1509052704.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:24.568Z,1509052704.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:24.644Z,1509052704.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:25.065Z,1509052705.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:25.375Z,1509052705.375 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:25.479Z,1509052705.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:25.777Z,1509052705.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:25.830Z,1509052705.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:26.238Z,1509052706.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:26.575Z,1509052706.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:26.657Z,1509052706.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:27.033Z,1509052707.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:27.367Z,1509052707.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:27.431Z,1509052707.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:27.777Z,1509052707.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:27.834Z,1509052707.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:28.230Z,1509052708.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:28.572Z,1509052708.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:28.632Z,1509052708.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:29.051Z,1509052709.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:29.362Z,1509052709.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:29.427Z,1509052709.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:29.768Z,1509052709.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:29.823Z,1509052709.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:30.223Z,1509052710.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:30.562Z,1509052710.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:30.624Z,1509052710.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:31.101Z,1509052711.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:31.358Z,1509052711.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:31.427Z,1509052711.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:31.763Z,1509052711.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:31.821Z,1509052711.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:32.224Z,1509052712.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:32.560Z,1509052712.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:32.628Z,1509052712.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:33.090Z,1509052713.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:33.370Z,1509052713.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:33.455Z,1509052713.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:33.782Z,1509052713.782 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:33.828Z,1509052713.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:34.233Z,1509052714.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:34.571Z,1509052714.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:34.634Z,1509052714.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:35.105Z,1509052715.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:35.364Z,1509052715.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:35.439Z,1509052715.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:35.870Z,1509052715.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:36.158Z,1509052716.158 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:36.236Z,1509052716.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:36.572Z,1509052716.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:36.658Z,1509052716.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:37.115Z,1509052717.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:37.363Z,1509052717.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:37.449Z,1509052717.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:37.768Z,1509052717.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:37.832Z,1509052717.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:38.230Z,1509052718.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:38.563Z,1509052718.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:38.634Z,1509052718.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:39.096Z,1509052719.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:39.358Z,1509052719.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:39.425Z,1509052719.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:39.765Z,1509052719.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:39.847Z,1509052719.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:40.248Z,1509052720.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:40.556Z,1509052720.556 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:40.610Z,1509052720.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:41.078Z,1509052721.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:41.353Z,1509052721.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:41.444Z,1509052721.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:41.760Z,1509052721.760 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:41.847Z,1509052721.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:42.261Z,1509052722.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:42.551Z,1509052722.551 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:42.623Z,1509052722.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:43.103Z,1509052723.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:43.348Z,1509052723.348 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:43.430Z,1509052723.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:43.753Z,1509052723.753 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:43.837Z,1509052723.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:44.232Z,1509052724.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:44.546Z,1509052724.546 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:44.619Z,1509052724.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:45.102Z,1509052725.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:45.343Z,1509052725.343 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:45.436Z,1509052725.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:45.748Z,1509052725.748 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:45.835Z,1509052725.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:46.237Z,1509052726.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:46.541Z,1509052726.541 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:46.622Z,1509052726.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:47.046Z,1509052727.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:47.340Z,1509052727.340 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:47.445Z,1509052727.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:47.743Z,1509052727.743 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:47.823Z,1509052727.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:48.227Z,1509052728.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:48.536Z,1509052728.536 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:48.621Z,1509052728.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:49.090Z,1509052729.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:49.334Z,1509052729.334 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:49.420Z,1509052729.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:49.738Z,1509052729.738 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:49.841Z,1509052729.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:50.228Z,1509052730.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:50.531Z,1509052730.531 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:50.648Z,1509052730.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:51.015Z,1509052731.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:51.329Z,1509052731.329 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:51.470Z,1509052731.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:51.733Z,1509052731.733 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:51.819Z,1509052731.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:52.226Z,1509052732.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:52.527Z,1509052732.527 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:52.641Z,1509052732.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:53.086Z,1509052733.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:53.325Z,1509052733.325 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:53.455Z,1509052733.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:53.728Z,1509052733.728 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:53.837Z,1509052733.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:54.231Z,1509052734.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:54.526Z,1509052734.526 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:54.622Z,1509052734.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:54.931Z,1509052734.931 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:55.082Z,1509052735.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:55.428Z,1509052735.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:55.471Z,1509052735.471 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:55.813Z,1509052735.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:56.248Z,1509052736.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:56.269Z,1509052736.269 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:56.634Z,1509052736.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:56.673Z,1509052736.673 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:57.125Z,1509052737.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:57.428Z,1509052737.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:57.466Z,1509052737.466 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:57.853Z,1509052737.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:57.871Z,1509052737.871 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:58.269Z,1509052738.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:58.573Z,1509052738.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:58.653Z,1509052738.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:59.086Z,1509052739.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:59.365Z,1509052739.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:59.432Z,1509052739.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:18:59.770Z,1509052739.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:18:59.976Z,1509052739.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:00.375Z,1509052740.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:00.564Z,1509052740.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:00.778Z,1509052740.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:01.205Z,1509052741.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:01.361Z,1509052741.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:01.593Z,1509052741.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:01.765Z,1509052741.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:01.990Z,1509052741.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:02.372Z,1509052742.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:02.561Z,1509052742.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:02.765Z,1509052742.765 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T21:19:02.765Z,1509052742.765 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:19:02.766Z,1509052742.766 [BPC1](ERROR): Data Fault
2017-10-26T21:19:02.776Z,1509052742.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:02.896Z,1509052742.896 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:19:03.220Z,1509052743.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:03.360Z,1509052743.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:03.661Z,1509052743.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:03.767Z,1509052743.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:03.997Z,1509052743.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:04.097Z,1509052744.097 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:19:04.098Z,1509052744.098 [BPC1] No Fault, FailCount= 1
2017-10-26T21:19:04.437Z,1509052744.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:04.561Z,1509052744.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:04.776Z,1509052744.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:05.225Z,1509052745.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:05.359Z,1509052745.359 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:05.577Z,1509052745.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:05.763Z,1509052745.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:05.982Z,1509052745.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:06.386Z,1509052746.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:06.556Z,1509052746.556 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:06.785Z,1509052746.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:07.199Z,1509052747.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:07.355Z,1509052747.355 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:07.579Z,1509052747.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:07.762Z,1509052747.762 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:07.985Z,1509052747.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:08.403Z,1509052748.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:08.560Z,1509052748.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:08.782Z,1509052748.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:08.967Z,1509052748.967 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:09.201Z,1509052749.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:09.425Z,1509052749.425 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:09.533Z,1509052749.533 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:19:09.590Z,1509052749.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:09.973Z,1509052749.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:10.222Z,1509052750.222 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:10.441Z,1509052750.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:10.628Z,1509052750.628 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:10.778Z,1509052750.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:11.199Z,1509052751.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:11.420Z,1509052751.420 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:11.581Z,1509052751.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:11.825Z,1509052751.825 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:12.077Z,1509052752.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:12.496Z,1509052752.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:12.570Z,1509052752.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:12.904Z,1509052752.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:13.289Z,1509052753.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:13.365Z,1509052753.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:13.698Z,1509052753.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:13.771Z,1509052753.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:14.093Z,1509052754.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:14.519Z,1509052754.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:14.565Z,1509052754.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:14.959Z,1509052754.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:15.338Z,1509052755.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:15.363Z,1509052755.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:15.681Z,1509052755.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:15.793Z,1509052755.793 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:16.109Z,1509052756.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:16.502Z,1509052756.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:16.571Z,1509052756.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:16.895Z,1509052756.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:17.327Z,1509052757.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:17.365Z,1509052757.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:17.735Z,1509052757.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:18.125Z,1509052758.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:18.136Z,1509052758.136 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:18.486Z,1509052758.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:18.905Z,1509052758.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:18.932Z,1509052758.932 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:19.315Z,1509052759.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:19.569Z,1509052759.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:19.741Z,1509052759.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:20.080Z,1509052760.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:20.483Z,1509052760.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:20.570Z,1509052760.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:20.886Z,1509052760.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:21.293Z,1509052761.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:21.367Z,1509052761.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:21.672Z,1509052761.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:21.776Z,1509052761.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:22.078Z,1509052762.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:22.484Z,1509052762.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:22.569Z,1509052762.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:22.874Z,1509052762.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:23.294Z,1509052763.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:23.363Z,1509052763.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:23.699Z,1509052763.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:23.767Z,1509052763.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:24.079Z,1509052764.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:24.487Z,1509052764.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:24.560Z,1509052764.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:24.874Z,1509052764.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:25.285Z,1509052765.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:25.362Z,1509052765.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:25.691Z,1509052765.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:25.766Z,1509052765.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:26.081Z,1509052766.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:26.492Z,1509052766.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:26.562Z,1509052766.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:26.882Z,1509052766.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:27.279Z,1509052767.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:27.357Z,1509052767.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:27.688Z,1509052767.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:27.762Z,1509052767.762 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:28.086Z,1509052768.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:28.488Z,1509052768.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:28.559Z,1509052768.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:28.881Z,1509052768.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:29.279Z,1509052769.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:29.356Z,1509052769.356 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:29.680Z,1509052769.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:29.762Z,1509052769.762 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:30.083Z,1509052770.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:30.558Z,1509052770.558 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:30.630Z,1509052770.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:31.064Z,1509052771.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:31.356Z,1509052771.356 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:31.502Z,1509052771.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:31.768Z,1509052771.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:31.839Z,1509052771.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:32.229Z,1509052772.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:32.561Z,1509052772.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:32.647Z,1509052772.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:32.965Z,1509052772.965 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:33.044Z,1509052773.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:33.437Z,1509052773.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:33.446Z,1509052773.446 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:33.843Z,1509052773.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:34.214Z,1509052774.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:34.243Z,1509052774.243 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:34.612Z,1509052774.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:34.648Z,1509052774.648 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:35.049Z,1509052775.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:35.423Z,1509052775.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:35.430Z,1509052775.430 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:35.809Z,1509052775.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:36.227Z,1509052776.227 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:36.232Z,1509052776.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:36.624Z,1509052776.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:36.631Z,1509052776.631 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:37.083Z,1509052777.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:37.420Z,1509052777.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:37.424Z,1509052777.424 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:37.805Z,1509052777.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:37.829Z,1509052777.829 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:38.221Z,1509052778.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:38.566Z,1509052778.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:38.611Z,1509052778.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:39.033Z,1509052779.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:39.360Z,1509052779.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:39.422Z,1509052779.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:39.768Z,1509052779.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:39.825Z,1509052779.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:40.225Z,1509052780.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:40.561Z,1509052780.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:40.616Z,1509052780.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:41.119Z,1509052781.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:41.363Z,1509052781.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:41.413Z,1509052781.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:41.770Z,1509052781.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:41.824Z,1509052781.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:42.239Z,1509052782.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:42.562Z,1509052782.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:42.640Z,1509052782.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:43.089Z,1509052783.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:43.357Z,1509052783.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:43.426Z,1509052783.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:43.763Z,1509052783.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:43.809Z,1509052783.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:44.221Z,1509052784.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:44.555Z,1509052784.555 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:44.612Z,1509052784.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:45.057Z,1509052785.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:45.352Z,1509052785.352 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:45.462Z,1509052785.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:45.759Z,1509052785.759 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:45.810Z,1509052785.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:46.229Z,1509052786.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:46.550Z,1509052786.550 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:46.636Z,1509052786.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:47.037Z,1509052787.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:47.348Z,1509052787.348 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:47.407Z,1509052787.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:47.752Z,1509052787.752 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:47.841Z,1509052787.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:48.256Z,1509052788.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:48.549Z,1509052788.549 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:48.625Z,1509052788.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:49.033Z,1509052789.033 [BPC1](ERROR): Failed to receive battery data
2017-10-26T21:19:49.033Z,1509052789.033 [BPC1] Communications Fault, FailCount= 1
2017-10-26T21:19:49.033Z,1509052789.033 [BPC1](ERROR): Communications Fault
2017-10-26T21:19:49.070Z,1509052789.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:49.186Z,1509052789.186 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T21:19:49.351Z,1509052789.351 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:49.426Z,1509052789.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:49.755Z,1509052789.755 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:49.820Z,1509052789.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:50.239Z,1509052790.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:50.353Z,1509052790.353 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:19:50.353Z,1509052790.353 [BPC1] No Fault, FailCount= 1
2017-10-26T21:19:50.554Z,1509052790.554 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:50.660Z,1509052790.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:51.038Z,1509052791.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:51.350Z,1509052791.350 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:51.416Z,1509052791.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:51.754Z,1509052791.754 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:51.848Z,1509052791.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:52.234Z,1509052792.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:52.552Z,1509052792.552 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:52.631Z,1509052792.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:52.958Z,1509052792.958 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:53.083Z,1509052793.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:53.427Z,1509052793.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:53.497Z,1509052793.497 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:53.818Z,1509052793.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:54.233Z,1509052794.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:54.295Z,1509052794.295 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:54.638Z,1509052794.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:54.699Z,1509052794.699 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:55.185Z,1509052795.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:55.380Z,1509052795.380 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:55.549Z,1509052795.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:55.955Z,1509052795.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:56.179Z,1509052796.179 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:56.357Z,1509052796.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:56.586Z,1509052796.586 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:56.754Z,1509052796.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:57.189Z,1509052797.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:57.379Z,1509052797.379 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:57.554Z,1509052797.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:57.784Z,1509052797.784 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:57.948Z,1509052797.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:58.359Z,1509052798.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:58.573Z,1509052798.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:58.767Z,1509052798.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:59.189Z,1509052799.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:59.366Z,1509052799.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:59.572Z,1509052799.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:19:59.773Z,1509052799.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:19:59.945Z,1509052799.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:00.350Z,1509052800.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:00.564Z,1509052800.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:00.749Z,1509052800.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:01.187Z,1509052801.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:01.362Z,1509052801.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:01.565Z,1509052801.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:01.770Z,1509052801.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:01.961Z,1509052801.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:02.365Z,1509052802.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:02.563Z,1509052802.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:02.782Z,1509052802.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:03.185Z,1509052803.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:03.362Z,1509052803.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:03.583Z,1509052803.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:03.765Z,1509052803.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:03.973Z,1509052803.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:04.387Z,1509052804.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:04.564Z,1509052804.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:04.793Z,1509052804.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:05.184Z,1509052805.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:05.364Z,1509052805.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:05.560Z,1509052805.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:05.769Z,1509052805.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:05.966Z,1509052805.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:06.362Z,1509052806.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:06.564Z,1509052806.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:06.755Z,1509052806.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:07.180Z,1509052807.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:07.363Z,1509052807.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:07.554Z,1509052807.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:07.770Z,1509052807.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:07.949Z,1509052807.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:08.359Z,1509052808.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:08.565Z,1509052808.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:08.760Z,1509052808.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:09.157Z,1509052809.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:09.362Z,1509052809.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:09.551Z,1509052809.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:09.766Z,1509052809.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:10.055Z,1509052810.055 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:20:10.112Z,1509052810.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:10.518Z,1509052810.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:10.564Z,1509052810.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:11.008Z,1509052811.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:11.307Z,1509052811.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:11.368Z,1509052811.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:11.720Z,1509052811.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:11.774Z,1509052811.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:12.107Z,1509052812.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:12.525Z,1509052812.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:12.570Z,1509052812.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:12.985Z,1509052812.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:13.304Z,1509052813.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:13.364Z,1509052813.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:13.711Z,1509052813.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:13.769Z,1509052813.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:14.119Z,1509052814.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:14.510Z,1509052814.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:14.563Z,1509052814.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:15.004Z,1509052815.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:15.351Z,1509052815.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:15.359Z,1509052815.359 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:15.720Z,1509052815.720 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T21:20:15.720Z,1509052815.720 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:20:15.720Z,1509052815.720 [BPC1](ERROR): Data Fault
2017-10-26T21:20:15.735Z,1509052815.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:15.768Z,1509052815.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:15.853Z,1509052815.853 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:20:16.108Z,1509052816.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:16.508Z,1509052816.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:16.566Z,1509052816.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:17.051Z,1509052817.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:17.119Z,1509052817.119 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:20:17.119Z,1509052817.119 [BPC1] No Fault, FailCount= 1
2017-10-26T21:20:17.365Z,1509052817.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:17.385Z,1509052817.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:17.741Z,1509052817.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:17.771Z,1509052817.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:18.108Z,1509052818.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:18.512Z,1509052818.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:18.569Z,1509052818.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:18.989Z,1509052818.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:19.294Z,1509052819.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:19.366Z,1509052819.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:19.714Z,1509052819.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:19.770Z,1509052819.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:20.099Z,1509052820.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:20.503Z,1509052820.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:20.566Z,1509052820.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:20.992Z,1509052820.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:21.315Z,1509052821.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:21.368Z,1509052821.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:21.738Z,1509052821.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:21.775Z,1509052821.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:22.109Z,1509052822.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:22.504Z,1509052822.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:22.573Z,1509052822.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:22.927Z,1509052822.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:23.318Z,1509052823.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:23.368Z,1509052823.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:23.717Z,1509052823.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:23.773Z,1509052823.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:24.115Z,1509052824.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:24.515Z,1509052824.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:24.565Z,1509052824.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:24.956Z,1509052824.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:25.305Z,1509052825.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:25.364Z,1509052825.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:25.711Z,1509052825.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:25.780Z,1509052825.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:26.112Z,1509052826.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:26.522Z,1509052826.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:26.575Z,1509052826.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:26.989Z,1509052826.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:27.311Z,1509052827.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:27.370Z,1509052827.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:27.708Z,1509052827.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:27.775Z,1509052827.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:28.111Z,1509052828.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:28.546Z,1509052828.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:28.570Z,1509052828.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:28.981Z,1509052828.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:29.311Z,1509052829.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:29.365Z,1509052829.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:29.755Z,1509052829.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:29.770Z,1509052829.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:30.104Z,1509052830.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:30.511Z,1509052830.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:30.563Z,1509052830.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:31.009Z,1509052831.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:31.292Z,1509052831.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:31.360Z,1509052831.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:31.742Z,1509052831.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:31.767Z,1509052831.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:32.138Z,1509052832.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:32.505Z,1509052832.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:32.570Z,1509052832.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:32.998Z,1509052832.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:33.307Z,1509052833.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:33.369Z,1509052833.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:33.706Z,1509052833.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:33.776Z,1509052833.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:34.124Z,1509052834.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:34.518Z,1509052834.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:34.569Z,1509052834.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:34.960Z,1509052834.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:35.315Z,1509052835.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:35.363Z,1509052835.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:35.715Z,1509052835.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:35.767Z,1509052835.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:36.119Z,1509052836.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:36.530Z,1509052836.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:36.560Z,1509052836.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:37.102Z,1509052837.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:37.357Z,1509052837.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:37.476Z,1509052837.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:37.762Z,1509052837.762 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:37.840Z,1509052837.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:38.247Z,1509052838.247 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:38.248Z,1509052838.248 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 31
2017-10-26T21:20:38.248Z,1509052838.248 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:20:38.252Z,1509052838.252 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:38.252Z,1509052838.252 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 31
2017-10-26T21:20:38.252Z,1509052838.252 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:20:38.315Z,1509052838.315 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:20:38.316Z,1509052838.316 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:20:38.560Z,1509052838.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:38.779Z,1509052838.779 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:20:38.779Z,1509052838.779 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 31
2017-10-26T21:20:38.780Z,1509052838.780 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:20:38.780Z,1509052838.780 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 31
2017-10-26T21:20:39.065Z,1509052839.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:20:39.066Z,1509052839.066 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:20:39.066Z,1509052839.066 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:20:39.069Z,1509052839.069 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:20:39.069Z,1509052839.069 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:20:39.070Z,1509052839.070 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:20:39.356Z,1509052839.356 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:39.447Z,1509052839.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:39.761Z,1509052839.761 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:39.837Z,1509052839.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:40.238Z,1509052840.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:40.570Z,1509052840.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:40.644Z,1509052840.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:41.110Z,1509052841.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:41.370Z,1509052841.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:41.439Z,1509052841.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:41.776Z,1509052841.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:41.852Z,1509052841.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:42.226Z,1509052842.226 [BPC1](ERROR): Failed to parse message.
2017-10-26T21:20:42.226Z,1509052842.226 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T21:20:42.226Z,1509052842.226 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:20:42.226Z,1509052842.226 [BPC1](ERROR): Data Fault
2017-10-26T21:20:42.252Z,1509052842.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:42.298Z,1509052842.298 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:20:42.565Z,1509052842.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:42.640Z,1509052842.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:43.034Z,1509052843.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:43.360Z,1509052843.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:43.441Z,1509052843.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:43.532Z,1509052843.532 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:20:43.532Z,1509052843.532 [BPC1] No Fault, FailCount= 1
2017-10-26T21:20:43.767Z,1509052843.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:43.898Z,1509052843.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:44.257Z,1509052844.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:44.560Z,1509052844.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:44.649Z,1509052844.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:45.053Z,1509052845.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:45.362Z,1509052845.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:45.476Z,1509052845.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:45.766Z,1509052845.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:45.841Z,1509052845.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:46.241Z,1509052846.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:46.562Z,1509052846.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:46.642Z,1509052846.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:47.039Z,1509052847.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:47.357Z,1509052847.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:47.441Z,1509052847.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:47.761Z,1509052847.761 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:47.884Z,1509052847.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:48.238Z,1509052848.238 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:48.294Z,1509052848.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:48.663Z,1509052848.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:49.036Z,1509052849.036 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:49.058Z,1509052849.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:49.450Z,1509052849.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:49.568Z,1509052849.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:49.863Z,1509052849.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:50.262Z,1509052850.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:50.362Z,1509052850.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:50.639Z,1509052850.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:51.066Z,1509052851.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:51.168Z,1509052851.168 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:51.465Z,1509052851.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:51.571Z,1509052851.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:51.898Z,1509052851.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:52.276Z,1509052852.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:52.369Z,1509052852.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:52.641Z,1509052852.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:52.773Z,1509052852.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:53.057Z,1509052853.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:53.406Z,1509052853.406 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:53.497Z,1509052853.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:53.835Z,1509052853.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:54.204Z,1509052854.204 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:54.261Z,1509052854.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:54.608Z,1509052854.608 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:54.643Z,1509052854.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:55.039Z,1509052855.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:55.369Z,1509052855.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:55.445Z,1509052855.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:55.840Z,1509052855.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:56.167Z,1509052856.167 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:56.295Z,1509052856.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:56.571Z,1509052856.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:56.667Z,1509052856.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:57.042Z,1509052857.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:57.367Z,1509052857.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:57.479Z,1509052857.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:57.777Z,1509052857.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:57.845Z,1509052857.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:58.238Z,1509052858.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:58.566Z,1509052858.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:58.665Z,1509052858.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:59.047Z,1509052859.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:59.361Z,1509052859.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:59.478Z,1509052859.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:20:59.769Z,1509052859.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:20:59.870Z,1509052859.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:00.247Z,1509052860.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:00.565Z,1509052860.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:00.647Z,1509052860.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:01.079Z,1509052861.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:01.367Z,1509052861.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:01.451Z,1509052861.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:01.771Z,1509052861.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:01.838Z,1509052861.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:02.243Z,1509052862.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:02.564Z,1509052862.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:02.651Z,1509052862.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:03.068Z,1509052863.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:03.362Z,1509052863.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:03.463Z,1509052863.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:03.769Z,1509052863.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:03.835Z,1509052863.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:04.243Z,1509052864.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:04.568Z,1509052864.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:04.688Z,1509052864.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:05.099Z,1509052865.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:05.385Z,1509052865.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:05.462Z,1509052865.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:05.789Z,1509052865.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:05.847Z,1509052865.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:06.285Z,1509052866.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:06.649Z,1509052866.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:07.089Z,1509052867.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:07.448Z,1509052867.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:07.489Z,1509052867.489 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:07.850Z,1509052867.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:08.251Z,1509052868.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:08.286Z,1509052868.286 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:08.675Z,1509052868.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:08.690Z,1509052868.690 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:09.117Z,1509052869.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:09.465Z,1509052869.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:09.483Z,1509052869.483 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:09.792Z,1509052869.792 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:21:09.868Z,1509052869.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:09.888Z,1509052869.888 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:10.327Z,1509052870.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:10.589Z,1509052870.589 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:10.647Z,1509052870.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:11.059Z,1509052871.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:11.383Z,1509052871.383 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:11.466Z,1509052871.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:11.787Z,1509052871.787 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:11.871Z,1509052871.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:12.235Z,1509052872.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:12.568Z,1509052872.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:12.678Z,1509052872.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:13.051Z,1509052873.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:13.361Z,1509052873.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:13.480Z,1509052873.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:13.868Z,1509052873.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:14.074Z,1509052874.074 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:14.258Z,1509052874.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:14.567Z,1509052874.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:14.672Z,1509052874.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:15.038Z,1509052875.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:15.362Z,1509052875.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:15.438Z,1509052875.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:15.850Z,1509052875.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:16.065Z,1509052876.065 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:16.249Z,1509052876.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:16.588Z,1509052876.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:16.639Z,1509052876.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:17.073Z,1509052877.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:17.379Z,1509052877.379 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:17.648Z,1509052877.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:17.784Z,1509052877.784 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:18.057Z,1509052878.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:18.442Z,1509052878.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:18.569Z,1509052878.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:18.846Z,1509052878.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:19.261Z,1509052879.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:19.362Z,1509052879.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:19.637Z,1509052879.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:19.769Z,1509052879.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:20.041Z,1509052880.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:20.440Z,1509052880.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:20.560Z,1509052880.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:20.849Z,1509052880.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:21.246Z,1509052881.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:21.358Z,1509052881.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:21.652Z,1509052881.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:21.763Z,1509052881.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:22.057Z,1509052882.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:22.442Z,1509052882.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:22.555Z,1509052882.555 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:22.856Z,1509052882.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:23.241Z,1509052883.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:23.355Z,1509052883.355 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:23.664Z,1509052883.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:23.762Z,1509052883.761 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:24.047Z,1509052884.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:24.473Z,1509052884.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:24.560Z,1509052884.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:24.870Z,1509052884.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:25.242Z,1509052885.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:25.356Z,1509052885.356 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:25.640Z,1509052885.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:25.760Z,1509052885.760 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:26.083Z,1509052886.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:26.451Z,1509052886.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:26.561Z,1509052886.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:26.856Z,1509052886.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:27.261Z,1509052887.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:27.363Z,1509052887.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:27.650Z,1509052887.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:27.770Z,1509052887.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:28.059Z,1509052888.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:28.476Z,1509052888.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:28.565Z,1509052888.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:28.840Z,1509052888.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:29.242Z,1509052889.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:29.362Z,1509052889.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:29.648Z,1509052889.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:29.767Z,1509052889.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:30.049Z,1509052890.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:30.461Z,1509052890.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:30.564Z,1509052890.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:30.843Z,1509052890.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:31.249Z,1509052891.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:31.362Z,1509052891.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:31.647Z,1509052891.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:31.766Z,1509052891.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:32.054Z,1509052892.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:32.521Z,1509052892.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:32.568Z,1509052892.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:32.918Z,1509052892.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:33.332Z,1509052893.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:33.368Z,1509052893.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:33.725Z,1509052893.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:33.774Z,1509052893.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:34.136Z,1509052894.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:34.512Z,1509052894.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:34.566Z,1509052894.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:34.908Z,1509052894.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:35.319Z,1509052895.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:35.363Z,1509052895.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:35.723Z,1509052895.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:35.772Z,1509052895.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:36.127Z,1509052896.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:36.527Z,1509052896.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:36.570Z,1509052896.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:36.928Z,1509052896.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:37.355Z,1509052897.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:37.372Z,1509052897.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:37.728Z,1509052897.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:37.807Z,1509052897.807 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:38.137Z,1509052898.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:38.527Z,1509052898.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:38.921Z,1509052898.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:39.348Z,1509052899.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:39.566Z,1509052899.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:39.781Z,1509052899.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:40.171Z,1509052900.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:40.511Z,1509052900.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:40.570Z,1509052900.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:40.946Z,1509052900.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:41.320Z,1509052901.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:41.361Z,1509052901.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:41.783Z,1509052901.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:42.062Z,1509052902.062 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:42.127Z,1509052902.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:42.572Z,1509052902.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:42.862Z,1509052902.862 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:43.013Z,1509052903.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:43.313Z,1509052903.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:43.464Z,1509052903.464 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:43.712Z,1509052903.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:44.116Z,1509052904.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:44.261Z,1509052904.261 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:44.516Z,1509052904.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:44.921Z,1509052904.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:45.059Z,1509052905.059 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:45.323Z,1509052905.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:45.467Z,1509052905.467 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:45.714Z,1509052905.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:46.119Z,1509052906.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:46.264Z,1509052906.264 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:46.519Z,1509052906.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:46.923Z,1509052906.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:47.061Z,1509052907.061 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:47.314Z,1509052907.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:47.466Z,1509052907.466 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:47.714Z,1509052907.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:48.116Z,1509052908.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:48.264Z,1509052908.264 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:48.535Z,1509052908.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:48.923Z,1509052908.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:49.062Z,1509052909.062 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:49.329Z,1509052909.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:49.507Z,1509052909.507 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:49.732Z,1509052909.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:50.130Z,1509052910.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:50.302Z,1509052910.302 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:50.521Z,1509052910.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:50.708Z,1509052910.708 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:50.922Z,1509052910.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:51.350Z,1509052911.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:51.500Z,1509052911.500 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:51.724Z,1509052911.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:51.905Z,1509052911.905 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:52.119Z,1509052912.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:52.515Z,1509052912.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:52.570Z,1509052912.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:52.914Z,1509052912.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:53.326Z,1509052913.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:53.366Z,1509052913.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:53.770Z,1509052913.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:54.060Z,1509052914.060 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:54.131Z,1509052914.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:54.530Z,1509052914.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:54.566Z,1509052914.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:54.923Z,1509052914.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:55.360Z,1509052915.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:55.388Z,1509052915.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:55.732Z,1509052915.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:56.068Z,1509052916.068 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:56.126Z,1509052916.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:56.564Z,1509052916.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:56.609Z,1509052916.609 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:56.947Z,1509052916.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:57.375Z,1509052917.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:57.402Z,1509052917.402 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:57.761Z,1509052917.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:57.806Z,1509052917.806 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:58.121Z,1509052918.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:58.523Z,1509052918.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:58.572Z,1509052918.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:58.924Z,1509052918.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:59.313Z,1509052919.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:59.365Z,1509052919.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:21:59.736Z,1509052919.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:21:59.771Z,1509052919.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:00.118Z,1509052920.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:00.518Z,1509052920.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:00.563Z,1509052920.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:01.012Z,1509052921.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:01.317Z,1509052921.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:01.360Z,1509052921.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:01.724Z,1509052921.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:01.764Z,1509052921.764 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:02.169Z,1509052922.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:02.532Z,1509052922.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:02.558Z,1509052922.558 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:03.004Z,1509052923.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:03.337Z,1509052923.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:03.357Z,1509052923.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:03.730Z,1509052923.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:03.763Z,1509052923.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:04.117Z,1509052924.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:04.539Z,1509052924.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:04.561Z,1509052924.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:05.001Z,1509052925.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:05.332Z,1509052925.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:05.363Z,1509052925.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:05.723Z,1509052925.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:05.767Z,1509052925.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:06.125Z,1509052926.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:06.537Z,1509052926.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:06.562Z,1509052926.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:06.968Z,1509052926.968 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:06.975Z,1509052926.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:07.323Z,1509052927.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:07.565Z,1509052927.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:07.728Z,1509052927.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:08.120Z,1509052928.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:08.359Z,1509052928.359 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:08.520Z,1509052928.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:08.763Z,1509052928.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:09.006Z,1509052929.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:09.309Z,1509052929.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:09.444Z,1509052929.444 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:09.718Z,1509052929.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:10.073Z,1509052930.073 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:22:10.173Z,1509052930.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:10.242Z,1509052930.242 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:10.531Z,1509052930.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:10.646Z,1509052930.646 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:10.991Z,1509052930.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:11.318Z,1509052931.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:11.439Z,1509052931.439 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:11.719Z,1509052931.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:11.844Z,1509052931.844 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:12.116Z,1509052932.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:12.523Z,1509052932.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:12.585Z,1509052932.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:12.926Z,1509052932.926 [BPC1](ERROR): Failed to receive battery data
2017-10-26T21:22:12.927Z,1509052932.927 [BPC1] Communications Fault, FailCount= 1
2017-10-26T21:22:12.927Z,1509052932.927 [BPC1](ERROR): Communications Fault
2017-10-26T21:22:12.968Z,1509052932.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:13.091Z,1509052933.091 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T21:22:13.325Z,1509052933.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:13.378Z,1509052933.378 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:13.730Z,1509052933.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:13.784Z,1509052933.784 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:14.122Z,1509052934.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:14.272Z,1509052934.272 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:22:14.272Z,1509052934.272 [BPC1] No Fault, FailCount= 1
2017-10-26T21:22:14.572Z,1509052934.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:14.589Z,1509052934.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:15.008Z,1509052935.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:15.310Z,1509052935.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:15.365Z,1509052935.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:15.729Z,1509052935.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:15.773Z,1509052935.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:16.173Z,1509052936.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:16.515Z,1509052936.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:16.567Z,1509052936.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:16.998Z,1509052936.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:17.314Z,1509052937.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:17.367Z,1509052937.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:17.721Z,1509052937.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:17.774Z,1509052937.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:18.120Z,1509052938.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:18.515Z,1509052938.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:18.566Z,1509052938.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:19.010Z,1509052939.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:19.333Z,1509052939.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:19.362Z,1509052939.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:19.722Z,1509052939.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:19.769Z,1509052939.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:20.129Z,1509052940.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:20.519Z,1509052940.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:20.561Z,1509052940.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:20.912Z,1509052940.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:21.320Z,1509052941.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:21.359Z,1509052941.359 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:21.725Z,1509052941.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:21.764Z,1509052941.764 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:22.122Z,1509052942.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:22.526Z,1509052942.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:22.563Z,1509052942.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:22.927Z,1509052942.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:23.312Z,1509052943.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:23.363Z,1509052943.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:23.720Z,1509052943.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:23.768Z,1509052943.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:24.123Z,1509052944.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:24.517Z,1509052944.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:24.565Z,1509052944.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:25.001Z,1509052945.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:25.342Z,1509052945.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:25.363Z,1509052945.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:25.729Z,1509052945.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:25.790Z,1509052945.790 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:26.119Z,1509052946.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:26.515Z,1509052946.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:26.567Z,1509052946.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:27.002Z,1509052947.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:27.334Z,1509052947.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:27.362Z,1509052947.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:27.727Z,1509052947.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:27.769Z,1509052947.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:28.125Z,1509052948.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:28.563Z,1509052948.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:28.580Z,1509052948.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:29.022Z,1509052949.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:29.363Z,1509052949.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:29.377Z,1509052949.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:29.735Z,1509052949.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:29.768Z,1509052949.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:30.189Z,1509052950.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:30.539Z,1509052950.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:30.563Z,1509052950.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:30.920Z,1509052950.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:31.345Z,1509052951.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:31.359Z,1509052951.359 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:31.722Z,1509052951.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:31.765Z,1509052951.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:32.130Z,1509052952.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:32.532Z,1509052952.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:32.561Z,1509052952.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:32.916Z,1509052952.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:33.320Z,1509052953.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:33.358Z,1509052953.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:33.730Z,1509052953.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:33.763Z,1509052953.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:34.126Z,1509052954.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:34.528Z,1509052954.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:34.559Z,1509052954.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:34.925Z,1509052954.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:35.320Z,1509052955.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:35.364Z,1509052955.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:35.716Z,1509052955.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:35.769Z,1509052955.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:36.135Z,1509052956.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:36.519Z,1509052956.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:36.565Z,1509052956.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:36.993Z,1509052956.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:37.319Z,1509052957.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:37.368Z,1509052957.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:37.720Z,1509052957.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:37.774Z,1509052957.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:38.159Z,1509052958.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:38.521Z,1509052958.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:38.565Z,1509052958.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:38.925Z,1509052958.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:39.329Z,1509052959.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:39.363Z,1509052959.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:39.739Z,1509052959.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:39.770Z,1509052959.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:40.119Z,1509052960.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:40.521Z,1509052960.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:40.565Z,1509052960.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:41.005Z,1509052961.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:41.314Z,1509052961.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:41.368Z,1509052961.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:41.724Z,1509052961.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:41.775Z,1509052961.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:42.126Z,1509052962.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:42.568Z,1509052962.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:42.738Z,1509052962.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:43.101Z,1509052963.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:43.365Z,1509052963.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:43.500Z,1509052963.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:43.769Z,1509052963.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:43.857Z,1509052963.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:44.277Z,1509052964.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:44.565Z,1509052964.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:44.689Z,1509052964.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:45.086Z,1509052965.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:45.368Z,1509052965.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:45.457Z,1509052965.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:45.774Z,1509052965.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:45.846Z,1509052965.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:46.278Z,1509052966.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:46.570Z,1509052966.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:46.648Z,1509052966.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:47.077Z,1509052967.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:47.363Z,1509052967.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:47.471Z,1509052967.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:47.771Z,1509052967.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:47.852Z,1509052967.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:48.333Z,1509052968.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:48.565Z,1509052968.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:48.651Z,1509052968.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:49.059Z,1509052969.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:49.363Z,1509052969.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:49.453Z,1509052969.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:49.771Z,1509052969.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:49.848Z,1509052969.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:50.257Z,1509052970.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:50.564Z,1509052970.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:50.655Z,1509052970.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:51.108Z,1509052971.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:51.363Z,1509052971.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:51.455Z,1509052971.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:51.766Z,1509052971.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:51.853Z,1509052971.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:52.269Z,1509052972.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:52.559Z,1509052972.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:52.646Z,1509052972.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:53.069Z,1509052973.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:53.361Z,1509052973.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:53.453Z,1509052973.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:53.765Z,1509052973.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:53.853Z,1509052973.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:54.252Z,1509052974.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:54.561Z,1509052974.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:54.655Z,1509052974.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:55.105Z,1509052975.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:55.360Z,1509052975.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:55.483Z,1509052975.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:55.765Z,1509052975.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:55.852Z,1509052975.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:56.309Z,1509052976.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:56.569Z,1509052976.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:56.918Z,1509052976.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:57.275Z,1509052977.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:57.368Z,1509052977.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:57.656Z,1509052977.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:57.775Z,1509052977.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:58.087Z,1509052978.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:58.483Z,1509052978.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:58.568Z,1509052978.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:58.925Z,1509052978.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:59.277Z,1509052979.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:59.363Z,1509052979.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:22:59.668Z,1509052979.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:22:59.766Z,1509052979.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:00.057Z,1509052980.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:00.463Z,1509052980.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:00.559Z,1509052980.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:00.871Z,1509052980.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:01.262Z,1509052981.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:01.361Z,1509052981.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:01.663Z,1509052981.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:01.765Z,1509052981.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:02.068Z,1509052982.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:02.455Z,1509052982.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:02.563Z,1509052982.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:02.861Z,1509052982.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:03.245Z,1509052983.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:03.363Z,1509052983.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:03.651Z,1509052983.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:03.771Z,1509052983.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:04.054Z,1509052984.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:04.464Z,1509052984.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:04.562Z,1509052984.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:04.860Z,1509052984.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:04.967Z,1509052984.967 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:05.271Z,1509052985.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:05.415Z,1509052985.415 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:05.673Z,1509052985.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:06.058Z,1509052986.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:06.212Z,1509052986.212 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:06.459Z,1509052986.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:06.617Z,1509052986.617 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:06.861Z,1509052986.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:07.260Z,1509052987.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:07.414Z,1509052987.414 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:07.678Z,1509052987.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:07.819Z,1509052987.819 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:08.050Z,1509052988.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:08.454Z,1509052988.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:08.566Z,1509052988.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:08.850Z,1509052988.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:09.253Z,1509052989.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:09.357Z,1509052989.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:09.697Z,1509052989.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:09.762Z,1509052989.762 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:10.063Z,1509052990.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:10.415Z,1509052990.415 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:23:10.469Z,1509052990.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:10.564Z,1509052990.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:10.874Z,1509052990.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:11.306Z,1509052991.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:11.361Z,1509052991.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:11.705Z,1509052991.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:11.768Z,1509052991.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:12.056Z,1509052992.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:12.500Z,1509052992.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:12.562Z,1509052992.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:12.863Z,1509052992.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:13.302Z,1509052993.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:13.360Z,1509052993.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:13.709Z,1509052993.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:13.765Z,1509052993.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:14.042Z,1509052994.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:14.468Z,1509052994.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:14.562Z,1509052994.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:14.867Z,1509052994.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:15.255Z,1509052995.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:15.365Z,1509052995.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:15.670Z,1509052995.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:15.772Z,1509052995.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:16.065Z,1509052996.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:16.480Z,1509052996.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:16.567Z,1509052996.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:16.871Z,1509052996.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:17.271Z,1509052997.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:17.366Z,1509052997.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:17.648Z,1509052997.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:17.770Z,1509052997.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:18.047Z,1509052998.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:18.466Z,1509052998.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:18.568Z,1509052998.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:18.883Z,1509052998.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:19.267Z,1509052999.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:19.361Z,1509052999.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:19.669Z,1509052999.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:19.768Z,1509052999.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:20.070Z,1509053000.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:20.471Z,1509053000.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:20.563Z,1509053000.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:20.889Z,1509053000.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:21.268Z,1509053001.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:21.360Z,1509053001.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:21.664Z,1509053001.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:21.765Z,1509053001.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:22.083Z,1509053002.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:22.452Z,1509053002.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:22.558Z,1509053002.558 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:22.899Z,1509053002.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:23.269Z,1509053003.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:23.361Z,1509053003.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:23.660Z,1509053003.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:23.768Z,1509053003.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:24.062Z,1509053004.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:24.473Z,1509053004.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:24.571Z,1509053004.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:24.866Z,1509053004.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:25.260Z,1509053005.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:25.366Z,1509053005.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:25.717Z,1509053005.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:25.771Z,1509053005.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:26.064Z,1509053006.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:26.456Z,1509053006.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:26.568Z,1509053006.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:26.896Z,1509053006.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:27.272Z,1509053007.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:27.365Z,1509053007.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:27.688Z,1509053007.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:27.772Z,1509053007.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:28.093Z,1509053008.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:28.455Z,1509053008.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:28.563Z,1509053008.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:28.864Z,1509053008.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:29.263Z,1509053009.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:29.360Z,1509053009.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:29.663Z,1509053009.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:29.765Z,1509053009.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:30.078Z,1509053010.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:30.454Z,1509053010.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:30.558Z,1509053010.558 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:30.856Z,1509053010.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:31.258Z,1509053011.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:31.357Z,1509053011.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:31.662Z,1509053011.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:31.764Z,1509053011.764 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:32.073Z,1509053012.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:32.465Z,1509053012.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:32.561Z,1509053012.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:32.844Z,1509053012.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:33.360Z,1509053013.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:33.374Z,1509053013.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:33.657Z,1509053013.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:33.799Z,1509053013.799 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:34.056Z,1509053014.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:34.476Z,1509053014.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:34.572Z,1509053014.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:34.862Z,1509053014.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:35.261Z,1509053015.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:35.366Z,1509053015.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:35.712Z,1509053015.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:36.058Z,1509053016.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:36.137Z,1509053016.137 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:36.460Z,1509053016.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:36.567Z,1509053016.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:36.862Z,1509053016.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:37.261Z,1509053017.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:37.361Z,1509053017.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:37.698Z,1509053017.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:38.069Z,1509053018.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:38.143Z,1509053018.143 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:38.448Z,1509053018.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:38.570Z,1509053018.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:38.852Z,1509053018.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:39.300Z,1509053019.300 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:39.300Z,1509053019.300 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 32
2017-10-26T21:23:39.300Z,1509053019.300 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:23:39.305Z,1509053019.305 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:39.305Z,1509053019.305 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 32
2017-10-26T21:23:39.305Z,1509053019.305 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:23:39.364Z,1509053019.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:39.397Z,1509053019.397 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:23:39.397Z,1509053019.397 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:23:39.749Z,1509053019.749 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:23:39.749Z,1509053019.749 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 32
2017-10-26T21:23:39.750Z,1509053019.750 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:23:39.750Z,1509053019.750 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 32
2017-10-26T21:23:39.768Z,1509053019.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:40.105Z,1509053020.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:23:40.105Z,1509053020.105 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:23:40.106Z,1509053020.106 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:23:40.112Z,1509053020.112 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:23:40.113Z,1509053020.113 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:23:40.113Z,1509053020.113 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:23:40.481Z,1509053020.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:40.562Z,1509053020.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:40.850Z,1509053020.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:41.294Z,1509053021.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:41.363Z,1509053021.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:41.660Z,1509053021.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:41.767Z,1509053021.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:42.079Z,1509053022.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:42.483Z,1509053022.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:42.563Z,1509053022.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:42.854Z,1509053022.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:43.281Z,1509053023.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:43.358Z,1509053023.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:43.668Z,1509053023.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:43.765Z,1509053023.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:44.057Z,1509053024.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:44.459Z,1509053024.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:44.560Z,1509053024.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:44.860Z,1509053024.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:45.273Z,1509053025.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:45.357Z,1509053025.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:45.659Z,1509053025.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:45.763Z,1509053025.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:46.058Z,1509053026.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:46.459Z,1509053026.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:46.555Z,1509053026.555 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:46.872Z,1509053026.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:47.266Z,1509053027.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:47.353Z,1509053027.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:47.663Z,1509053027.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:47.761Z,1509053027.761 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:48.095Z,1509053028.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:48.462Z,1509053028.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:48.559Z,1509053028.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:48.856Z,1509053028.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:49.269Z,1509053029.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:49.356Z,1509053029.356 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:49.664Z,1509053029.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:49.760Z,1509053029.760 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:50.064Z,1509053030.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:50.465Z,1509053030.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:50.560Z,1509053030.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:50.864Z,1509053030.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:51.250Z,1509053031.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:51.359Z,1509053031.359 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:51.657Z,1509053031.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:51.772Z,1509053031.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:52.055Z,1509053032.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:52.468Z,1509053032.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:52.564Z,1509053032.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:52.859Z,1509053032.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:53.284Z,1509053033.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:53.361Z,1509053033.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:53.684Z,1509053033.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:53.770Z,1509053033.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:54.045Z,1509053034.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:54.533Z,1509053034.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:54.568Z,1509053034.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:54.894Z,1509053034.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:55.255Z,1509053035.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:55.362Z,1509053035.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:55.660Z,1509053035.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:55.765Z,1509053035.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:56.084Z,1509053036.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:56.563Z,1509053036.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:56.646Z,1509053036.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:57.090Z,1509053037.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:57.364Z,1509053037.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:57.497Z,1509053037.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:57.768Z,1509053037.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:57.851Z,1509053037.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:58.251Z,1509053038.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:58.563Z,1509053038.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:58.654Z,1509053038.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:59.064Z,1509053039.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:59.359Z,1509053039.359 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:59.437Z,1509053039.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:23:59.766Z,1509053039.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:23:59.846Z,1509053039.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:00.247Z,1509053040.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:00.568Z,1509053040.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:00.659Z,1509053040.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:01.041Z,1509053041.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:01.368Z,1509053041.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:01.446Z,1509053041.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:01.782Z,1509053041.782 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:01.846Z,1509053041.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:02.248Z,1509053042.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:02.667Z,1509053042.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:03.059Z,1509053043.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:03.385Z,1509053043.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:03.460Z,1509053043.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:03.857Z,1509053043.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:04.184Z,1509053044.184 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:04.251Z,1509053044.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:04.599Z,1509053044.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:04.680Z,1509053044.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:05.046Z,1509053045.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:05.390Z,1509053045.390 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:05.473Z,1509053045.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:05.853Z,1509053045.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:06.198Z,1509053046.198 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:06.260Z,1509053046.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:06.604Z,1509053046.604 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:06.647Z,1509053046.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:07.186Z,1509053047.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:07.381Z,1509053047.381 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:07.553Z,1509053047.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:07.975Z,1509053047.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:08.177Z,1509053048.177 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:08.359Z,1509053048.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:08.581Z,1509053048.581 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:08.773Z,1509053048.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:09.176Z,1509053049.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:09.374Z,1509053049.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:09.577Z,1509053049.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:09.780Z,1509053049.780 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:10.001Z,1509053050.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:10.340Z,1509053050.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:10.564Z,1509053050.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:10.697Z,1509053050.697 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:24:10.790Z,1509053050.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:11.168Z,1509053051.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:11.360Z,1509053051.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:11.580Z,1509053051.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:11.766Z,1509053051.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:11.997Z,1509053051.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:12.344Z,1509053052.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:12.559Z,1509053052.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:12.746Z,1509053052.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:13.176Z,1509053053.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:13.361Z,1509053053.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:13.549Z,1509053053.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:13.765Z,1509053053.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:13.956Z,1509053053.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:14.365Z,1509053054.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:14.561Z,1509053054.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:14.738Z,1509053054.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:15.173Z,1509053055.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:15.360Z,1509053055.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:15.552Z,1509053055.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:15.766Z,1509053055.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:15.955Z,1509053055.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:16.356Z,1509053056.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:16.565Z,1509053056.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:16.750Z,1509053056.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:17.169Z,1509053057.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:17.373Z,1509053057.373 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:17.558Z,1509053057.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:17.775Z,1509053057.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:17.960Z,1509053057.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:18.349Z,1509053058.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:18.564Z,1509053058.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:18.749Z,1509053058.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:19.177Z,1509053059.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:19.360Z,1509053059.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:19.565Z,1509053059.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:19.766Z,1509053059.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:19.963Z,1509053059.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:20.346Z,1509053060.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:20.560Z,1509053060.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:20.762Z,1509053060.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:21.180Z,1509053061.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:21.298Z,1509053061.298 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T21:24:21.357Z,1509053061.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:21.558Z,1509053061.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:21.761Z,1509053061.761 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:21.958Z,1509053061.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:22.340Z,1509053062.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:22.561Z,1509053062.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:22.739Z,1509053062.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:23.179Z,1509053063.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:23.364Z,1509053063.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:23.594Z,1509053063.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:23.771Z,1509053063.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:23.947Z,1509053063.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:24.380Z,1509053064.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:24.566Z,1509053064.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:24.769Z,1509053064.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:25.154Z,1509053065.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:25.359Z,1509053065.359 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:25.595Z,1509053065.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:25.764Z,1509053065.764 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:25.947Z,1509053065.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:26.414Z,1509053066.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:26.557Z,1509053066.557 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:26.765Z,1509053066.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:27.180Z,1509053067.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:27.363Z,1509053067.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:27.547Z,1509053067.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:27.767Z,1509053067.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:27.944Z,1509053067.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:28.354Z,1509053068.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:28.561Z,1509053068.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:28.755Z,1509053068.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:29.192Z,1509053069.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:29.361Z,1509053069.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:29.555Z,1509053069.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:29.766Z,1509053069.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:29.933Z,1509053069.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:30.363Z,1509053070.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:30.562Z,1509053070.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:30.741Z,1509053070.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:31.181Z,1509053071.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:31.360Z,1509053071.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:31.550Z,1509053071.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:31.768Z,1509053071.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:31.950Z,1509053071.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:32.347Z,1509053072.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:32.568Z,1509053072.568 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:32.751Z,1509053072.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:33.202Z,1509053073.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:33.366Z,1509053073.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:33.541Z,1509053073.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:33.772Z,1509053073.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:33.943Z,1509053073.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:34.342Z,1509053074.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:34.566Z,1509053074.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:34.742Z,1509053074.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:35.181Z,1509053075.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:35.360Z,1509053075.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:35.565Z,1509053075.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:35.767Z,1509053075.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:35.947Z,1509053075.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:36.362Z,1509053076.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:36.561Z,1509053076.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:36.755Z,1509053076.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:37.178Z,1509053077.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:37.364Z,1509053077.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:37.588Z,1509053077.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:37.766Z,1509053077.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:37.943Z,1509053077.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:38.350Z,1509053078.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:38.564Z,1509053078.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:38.730Z,1509053078.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:38.826Z,1509053078.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:39.124Z,1509053079.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:39.180Z,1509053079.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:39.364Z,1509053079.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:39.514Z,1509053079.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:39.552Z,1509053079.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:39.773Z,1509053079.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:39.930Z,1509053079.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:39.984Z,1509053079.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:40.317Z,1509053080.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:40.347Z,1509053080.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:40.567Z,1509053080.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:40.717Z,1509053080.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:40.773Z,1509053080.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:41.117Z,1509053081.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:41.183Z,1509053081.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:41.366Z,1509053081.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:41.522Z,1509053081.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:41.574Z,1509053081.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:41.773Z,1509053081.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:41.916Z,1509053081.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:41.953Z,1509053081.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:42.327Z,1509053082.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:42.358Z,1509053082.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:42.566Z,1509053082.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:42.720Z,1509053082.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:42.756Z,1509053082.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:43.136Z,1509053083.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:43.188Z,1509053083.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:43.361Z,1509053083.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:43.528Z,1509053083.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:43.544Z,1509053083.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:43.768Z,1509053083.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:43.926Z,1509053083.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:43.942Z,1509053083.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:44.340Z,1509053084.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:44.377Z,1509053084.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:44.561Z,1509053084.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:44.728Z,1509053084.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:44.744Z,1509053084.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:45.115Z,1509053085.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:45.168Z,1509053085.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:45.358Z,1509053085.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:45.543Z,1509053085.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:45.567Z,1509053085.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:45.763Z,1509053085.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:45.919Z,1509053085.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:45.958Z,1509053085.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:46.332Z,1509053086.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:46.377Z,1509053086.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:46.562Z,1509053086.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:46.727Z,1509053086.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:46.763Z,1509053086.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:47.123Z,1509053087.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:47.143Z,1509053087.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:47.362Z,1509053087.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:47.518Z,1509053087.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:47.545Z,1509053087.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:47.778Z,1509053087.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:47.933Z,1509053087.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:47.949Z,1509053087.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:48.316Z,1509053088.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:48.353Z,1509053088.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:48.567Z,1509053088.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:48.725Z,1509053088.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:48.754Z,1509053088.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:49.123Z,1509053089.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:49.192Z,1509053089.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:49.367Z,1509053089.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:49.522Z,1509053089.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:49.559Z,1509053089.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:49.778Z,1509053089.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:49.923Z,1509053089.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:49.939Z,1509053089.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:50.325Z,1509053090.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:50.342Z,1509053090.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:50.727Z,1509053090.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:50.743Z,1509053090.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:51.145Z,1509053091.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:51.184Z,1509053091.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:51.380Z,1509053091.380 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:51.537Z,1509053091.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:51.558Z,1509053091.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:51.931Z,1509053091.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:51.948Z,1509053091.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:52.179Z,1509053092.179 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:52.314Z,1509053092.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:52.347Z,1509053092.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:52.585Z,1509053092.585 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:52.719Z,1509053092.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:52.780Z,1509053092.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:53.130Z,1509053093.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:53.177Z,1509053093.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:53.379Z,1509053093.379 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:53.533Z,1509053093.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:53.593Z,1509053093.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:53.784Z,1509053093.784 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:53.935Z,1509053093.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:53.952Z,1509053093.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:54.317Z,1509053094.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:54.353Z,1509053094.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:54.565Z,1509053094.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:54.727Z,1509053094.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:54.784Z,1509053094.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:55.129Z,1509053095.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:55.180Z,1509053095.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:55.358Z,1509053095.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:55.536Z,1509053095.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:55.592Z,1509053095.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:55.768Z,1509053095.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:55.935Z,1509053095.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:55.985Z,1509053095.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:56.332Z,1509053096.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:56.349Z,1509053096.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:56.564Z,1509053096.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:56.732Z,1509053096.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:56.758Z,1509053096.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:57.141Z,1509053097.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:57.187Z,1509053097.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:57.361Z,1509053097.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:57.518Z,1509053097.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:57.564Z,1509053097.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:57.765Z,1509053097.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:57.933Z,1509053097.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:57.957Z,1509053097.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:58.330Z,1509053098.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:58.374Z,1509053098.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:58.559Z,1509053098.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:58.725Z,1509053098.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:58.742Z,1509053098.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:59.128Z,1509053099.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:59.176Z,1509053099.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:59.358Z,1509053099.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:59.524Z,1509053099.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:59.541Z,1509053099.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:24:59.768Z,1509053099.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:59.934Z,1509053099.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:24:59.974Z,1509053099.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:00.329Z,1509053100.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:00.350Z,1509053100.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:00.562Z,1509053100.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:00.714Z,1509053100.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:00.757Z,1509053100.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:00.971Z,1509053100.971 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:01.122Z,1509053101.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:01.186Z,1509053101.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:01.375Z,1509053101.375 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:01.523Z,1509053101.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:01.555Z,1509053101.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:01.932Z,1509053101.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:01.948Z,1509053101.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:02.173Z,1509053102.173 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:02.322Z,1509053102.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:02.347Z,1509053102.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:02.726Z,1509053102.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:02.764Z,1509053102.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:02.970Z,1509053102.970 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:03.116Z,1509053103.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:03.181Z,1509053103.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:03.376Z,1509053103.376 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:03.531Z,1509053103.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:03.572Z,1509053103.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:03.928Z,1509053103.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:03.944Z,1509053103.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:04.171Z,1509053104.171 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:04.326Z,1509053104.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:04.370Z,1509053104.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:04.576Z,1509053104.576 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:04.742Z,1509053104.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:04.778Z,1509053104.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:05.157Z,1509053105.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:05.193Z,1509053105.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:05.374Z,1509053105.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:05.531Z,1509053105.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:05.564Z,1509053105.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:05.778Z,1509053105.778 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:05.920Z,1509053105.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:05.945Z,1509053105.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:06.330Z,1509053106.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:06.347Z,1509053106.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:06.563Z,1509053106.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:06.730Z,1509053106.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:06.752Z,1509053106.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:07.137Z,1509053107.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:07.183Z,1509053107.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:07.358Z,1509053107.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:07.535Z,1509053107.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:07.551Z,1509053107.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:07.765Z,1509053107.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:07.919Z,1509053107.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:07.949Z,1509053107.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:08.321Z,1509053108.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:08.376Z,1509053108.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:08.558Z,1509053108.558 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:08.724Z,1509053108.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:08.757Z,1509053108.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:09.154Z,1509053109.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:09.182Z,1509053109.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:09.355Z,1509053109.355 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:09.525Z,1509053109.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:09.562Z,1509053109.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:09.760Z,1509053109.760 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:09.926Z,1509053109.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:09.955Z,1509053109.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:10.329Z,1509053110.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:10.361Z,1509053110.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:10.555Z,1509053110.555 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:10.698Z,1509053110.698 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:25:10.731Z,1509053110.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:10.768Z,1509053110.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:11.139Z,1509053111.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:11.179Z,1509053111.179 [BPC1](ERROR): Failed to receive battery data
2017-10-26T21:25:11.179Z,1509053111.179 [BPC1] Communications Fault, FailCount= 1
2017-10-26T21:25:11.179Z,1509053111.179 [BPC1](ERROR): Communications Fault
2017-10-26T21:25:11.200Z,1509053111.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:11.303Z,1509053111.303 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T21:25:11.350Z,1509053111.350 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:11.516Z,1509053111.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:11.549Z,1509053111.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:11.755Z,1509053111.755 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:11.923Z,1509053111.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:11.948Z,1509053111.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:12.330Z,1509053112.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:12.365Z,1509053112.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:12.457Z,1509053112.457 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:25:12.457Z,1509053112.457 [BPC1] No Fault, FailCount= 1
2017-10-26T21:25:12.549Z,1509053112.549 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:12.722Z,1509053112.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:12.807Z,1509053112.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:13.122Z,1509053113.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:13.190Z,1509053113.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:13.347Z,1509053113.347 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:13.525Z,1509053113.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:13.541Z,1509053113.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:13.750Z,1509053113.750 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:13.929Z,1509053113.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:13.962Z,1509053113.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:14.328Z,1509053114.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:14.344Z,1509053114.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:14.547Z,1509053114.547 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:14.730Z,1509053114.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:14.745Z,1509053114.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:15.125Z,1509053115.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:15.175Z,1509053115.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:15.349Z,1509053115.349 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:15.522Z,1509053115.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:15.554Z,1509053115.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:15.753Z,1509053115.753 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:15.921Z,1509053115.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:15.964Z,1509053115.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:16.327Z,1509053116.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:16.365Z,1509053116.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:16.553Z,1509053116.553 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:16.724Z,1509053116.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:16.774Z,1509053116.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:16.958Z,1509053116.958 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:17.133Z,1509053117.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:17.189Z,1509053117.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:17.404Z,1509053117.404 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:17.518Z,1509053117.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:17.555Z,1509053117.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:17.925Z,1509053117.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:17.955Z,1509053117.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:18.201Z,1509053118.201 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:18.324Z,1509053118.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:18.350Z,1509053118.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:18.606Z,1509053118.606 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:18.721Z,1509053118.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:18.737Z,1509053118.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:19.123Z,1509053119.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:19.174Z,1509053119.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:19.371Z,1509053119.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:19.528Z,1509053119.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:19.549Z,1509053119.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:19.931Z,1509053119.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:19.947Z,1509053119.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:20.168Z,1509053120.168 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:20.321Z,1509053120.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:20.345Z,1509053120.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:20.573Z,1509053120.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:20.865Z,1509053120.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:20.960Z,1509053120.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:21.272Z,1509053121.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:21.304Z,1509053121.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:21.368Z,1509053121.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:21.672Z,1509053121.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:21.709Z,1509053121.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:21.775Z,1509053121.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:22.084Z,1509053122.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:22.119Z,1509053122.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:22.481Z,1509053122.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:22.509Z,1509053122.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:22.564Z,1509053122.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:22.871Z,1509053122.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:22.887Z,1509053122.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:23.284Z,1509053123.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:23.299Z,1509053123.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:23.359Z,1509053123.359 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:23.668Z,1509053123.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:23.704Z,1509053123.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:23.770Z,1509053123.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:24.075Z,1509053124.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:24.121Z,1509053124.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:24.480Z,1509053124.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:24.496Z,1509053124.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:24.566Z,1509053124.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:24.877Z,1509053124.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:24.964Z,1509053124.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:25.274Z,1509053125.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:25.304Z,1509053125.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:25.364Z,1509053125.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:25.675Z,1509053125.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:25.703Z,1509053125.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:25.769Z,1509053125.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:26.091Z,1509053126.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:26.146Z,1509053126.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:26.475Z,1509053126.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:26.492Z,1509053126.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:26.563Z,1509053126.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:26.873Z,1509053126.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:26.923Z,1509053126.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:27.277Z,1509053127.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:27.306Z,1509053127.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:27.360Z,1509053127.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:27.669Z,1509053127.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:27.734Z,1509053127.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:27.767Z,1509053127.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:28.074Z,1509053128.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:28.114Z,1509053128.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:28.474Z,1509053128.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:28.491Z,1509053128.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:28.565Z,1509053128.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:28.880Z,1509053128.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:28.986Z,1509053128.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:29.282Z,1509053129.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:29.298Z,1509053129.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:29.364Z,1509053129.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:29.682Z,1509053129.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:29.741Z,1509053129.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:29.771Z,1509053129.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:30.086Z,1509053130.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:30.102Z,1509053130.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:30.483Z,1509053130.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:30.542Z,1509053130.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:30.569Z,1509053130.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:30.875Z,1509053130.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:30.997Z,1509053130.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:31.269Z,1509053131.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:31.301Z,1509053131.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:31.363Z,1509053131.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:31.667Z,1509053131.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:31.716Z,1509053131.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:31.767Z,1509053131.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:32.076Z,1509053132.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:32.113Z,1509053132.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:32.476Z,1509053132.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:32.493Z,1509053132.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:32.566Z,1509053132.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:33.045Z,1509053133.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:33.073Z,1509053133.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:33.365Z,1509053133.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:33.434Z,1509053133.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:33.463Z,1509053133.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:33.769Z,1509053133.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:33.835Z,1509053133.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:33.852Z,1509053133.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:34.248Z,1509053134.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:34.272Z,1509053134.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:34.567Z,1509053134.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:34.642Z,1509053134.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:34.659Z,1509053134.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:35.031Z,1509053135.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:35.110Z,1509053135.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:35.360Z,1509053135.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:35.447Z,1509053135.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:35.480Z,1509053135.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:35.767Z,1509053135.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:35.830Z,1509053135.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:35.846Z,1509053135.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:36.243Z,1509053136.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:36.278Z,1509053136.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:36.562Z,1509053136.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:36.631Z,1509053136.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:36.654Z,1509053136.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:37.044Z,1509053137.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:37.061Z,1509053137.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:37.359Z,1509053137.359 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:37.429Z,1509053137.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:37.481Z,1509053137.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:37.764Z,1509053137.764 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:37.837Z,1509053137.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:37.853Z,1509053137.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:38.228Z,1509053138.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:38.246Z,1509053138.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:38.557Z,1509053138.557 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:38.631Z,1509053138.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:38.654Z,1509053138.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:39.032Z,1509053139.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:39.048Z,1509053139.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:39.355Z,1509053139.355 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:39.430Z,1509053139.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:39.458Z,1509053139.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:39.763Z,1509053139.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:39.829Z,1509053139.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:39.853Z,1509053139.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:40.236Z,1509053140.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:40.397Z,1509053140.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:40.562Z,1509053140.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:40.632Z,1509053140.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:40.655Z,1509053140.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:41.046Z,1509053141.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:41.063Z,1509053141.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:41.357Z,1509053141.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:41.428Z,1509053141.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:41.484Z,1509053141.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:41.762Z,1509053141.762 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:41.827Z,1509053141.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:41.876Z,1509053141.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:42.231Z,1509053142.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:42.294Z,1509053142.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:42.557Z,1509053142.557 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:42.634Z,1509053142.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:42.650Z,1509053142.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:43.034Z,1509053143.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:43.054Z,1509053143.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:43.352Z,1509053143.352 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:43.438Z,1509053143.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:43.491Z,1509053143.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:43.757Z,1509053143.757 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:43.844Z,1509053143.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:43.861Z,1509053143.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:44.238Z,1509053144.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:44.295Z,1509053144.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:44.554Z,1509053144.554 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:44.635Z,1509053144.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:44.659Z,1509053144.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:45.024Z,1509053145.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:45.078Z,1509053145.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:45.351Z,1509053145.351 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:45.441Z,1509053145.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:45.475Z,1509053145.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:45.758Z,1509053145.758 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:45.837Z,1509053145.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:45.853Z,1509053145.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:46.234Z,1509053146.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:46.250Z,1509053146.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:46.559Z,1509053146.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:46.645Z,1509053146.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:46.661Z,1509053146.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:47.043Z,1509053147.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:47.064Z,1509053147.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:47.356Z,1509053147.356 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:47.450Z,1509053147.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:47.473Z,1509053147.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:47.763Z,1509053147.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:47.841Z,1509053147.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:47.866Z,1509053147.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:48.232Z,1509053148.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:48.249Z,1509053148.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:48.556Z,1509053148.556 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:48.640Z,1509053148.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:48.672Z,1509053148.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:49.043Z,1509053149.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:49.060Z,1509053149.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:49.353Z,1509053149.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:49.448Z,1509053149.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:49.480Z,1509053149.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:49.758Z,1509053149.758 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:49.835Z,1509053149.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:49.857Z,1509053149.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:50.242Z,1509053150.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:50.259Z,1509053150.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:50.558Z,1509053150.558 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:50.636Z,1509053150.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:50.659Z,1509053150.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:51.033Z,1509053151.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:51.077Z,1509053151.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:51.352Z,1509053151.352 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:51.431Z,1509053151.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:51.455Z,1509053151.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:51.757Z,1509053151.757 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:51.838Z,1509053151.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:51.854Z,1509053151.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:52.234Z,1509053152.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:52.266Z,1509053152.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:52.555Z,1509053152.555 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:52.631Z,1509053152.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:52.655Z,1509053152.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:52.959Z,1509053152.959 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:53.025Z,1509053153.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:53.053Z,1509053153.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:53.370Z,1509053153.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:53.438Z,1509053153.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:53.458Z,1509053153.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:53.836Z,1509053153.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:53.852Z,1509053153.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:54.169Z,1509053154.169 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:54.243Z,1509053154.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:54.281Z,1509053154.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:54.575Z,1509053154.575 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:54.646Z,1509053154.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:54.664Z,1509053154.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:55.034Z,1509053155.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:55.050Z,1509053155.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:55.371Z,1509053155.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:55.427Z,1509053155.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:55.460Z,1509053155.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:55.775Z,1509053155.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:55.825Z,1509053155.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:55.885Z,1509053155.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:56.222Z,1509053156.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:56.259Z,1509053156.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:56.567Z,1509053156.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:56.639Z,1509053156.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:56.676Z,1509053156.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:57.028Z,1509053157.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:57.080Z,1509053157.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:57.362Z,1509053157.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:57.428Z,1509053157.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:57.461Z,1509053157.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:57.767Z,1509053157.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:57.841Z,1509053157.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:57.889Z,1509053157.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:58.225Z,1509053158.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:58.253Z,1509053158.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:58.562Z,1509053158.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:58.627Z,1509053158.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:58.695Z,1509053158.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:59.054Z,1509053159.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:59.111Z,1509053159.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:59.361Z,1509053159.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:59.430Z,1509053159.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:59.455Z,1509053159.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:25:59.768Z,1509053159.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:59.837Z,1509053159.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:25:59.865Z,1509053159.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:00.228Z,1509053160.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:00.270Z,1509053160.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:00.563Z,1509053160.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:00.633Z,1509053160.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:00.650Z,1509053160.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:01.047Z,1509053161.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:01.082Z,1509053161.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:01.360Z,1509053161.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:01.434Z,1509053161.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:01.452Z,1509053161.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:01.765Z,1509053161.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:01.837Z,1509053161.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:01.855Z,1509053161.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:02.241Z,1509053162.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:02.257Z,1509053162.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:02.562Z,1509053162.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:02.636Z,1509053162.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:02.666Z,1509053162.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:03.024Z,1509053163.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:03.053Z,1509053163.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:03.366Z,1509053163.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:03.433Z,1509053163.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:03.462Z,1509053163.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:03.772Z,1509053163.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:03.844Z,1509053163.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:03.861Z,1509053163.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:04.238Z,1509053164.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:04.254Z,1509053164.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:04.571Z,1509053164.571 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:04.633Z,1509053164.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:04.650Z,1509053164.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:05.023Z,1509053165.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:05.052Z,1509053165.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:05.362Z,1509053165.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:05.445Z,1509053165.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:05.465Z,1509053165.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:05.767Z,1509053165.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:05.836Z,1509053165.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:05.883Z,1509053165.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:06.234Z,1509053166.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:06.267Z,1509053166.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:06.562Z,1509053166.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:06.631Z,1509053166.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:06.683Z,1509053166.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:07.051Z,1509053167.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:07.078Z,1509053167.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:07.357Z,1509053167.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:07.434Z,1509053167.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:07.450Z,1509053167.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:07.762Z,1509053167.762 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:07.851Z,1509053167.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:07.892Z,1509053167.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:08.238Z,1509053168.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:08.255Z,1509053168.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:08.559Z,1509053168.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:08.641Z,1509053168.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:08.658Z,1509053168.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:09.053Z,1509053169.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:09.069Z,1509053169.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:09.357Z,1509053169.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:09.447Z,1509053169.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:09.464Z,1509053169.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:09.763Z,1509053169.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:09.828Z,1509053169.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:09.895Z,1509053169.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:10.225Z,1509053170.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:10.242Z,1509053170.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:10.558Z,1509053170.558 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:10.634Z,1509053170.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:10.667Z,1509053170.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:11.031Z,1509053171.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:11.099Z,1509053171.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:11.368Z,1509053171.368 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:11.404Z,1509053171.404 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:26:11.443Z,1509053171.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:11.472Z,1509053171.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:11.775Z,1509053171.775 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:11.835Z,1509053171.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:11.894Z,1509053171.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:12.226Z,1509053172.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:12.264Z,1509053172.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:12.624Z,1509053172.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:12.703Z,1509053172.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:13.050Z,1509053173.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:13.106Z,1509053173.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:13.441Z,1509053173.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:13.463Z,1509053173.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:13.831Z,1509053173.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:13.848Z,1509053173.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:14.234Z,1509053174.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:14.251Z,1509053174.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:14.639Z,1509053174.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:14.655Z,1509053174.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:15.035Z,1509053175.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:15.069Z,1509053175.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:15.437Z,1509053175.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:15.466Z,1509053175.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:15.834Z,1509053175.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:15.850Z,1509053175.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:16.236Z,1509053176.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:16.252Z,1509053176.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:16.637Z,1509053176.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:16.653Z,1509053176.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:17.042Z,1509053177.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:17.105Z,1509053177.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:17.440Z,1509053177.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:17.456Z,1509053177.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:17.836Z,1509053177.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:17.853Z,1509053177.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:18.238Z,1509053178.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:18.255Z,1509053178.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:18.636Z,1509053178.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:18.653Z,1509053178.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:19.025Z,1509053179.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:19.065Z,1509053179.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:19.439Z,1509053179.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:19.472Z,1509053179.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:19.826Z,1509053179.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:19.847Z,1509053179.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:20.239Z,1509053180.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:20.272Z,1509053180.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:20.640Z,1509053180.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:20.657Z,1509053180.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:21.033Z,1509053181.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:21.049Z,1509053181.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:21.447Z,1509053181.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:21.463Z,1509053181.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:21.838Z,1509053181.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:21.855Z,1509053181.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:22.240Z,1509053182.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:22.256Z,1509053182.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:22.623Z,1509053182.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:22.660Z,1509053182.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:23.212Z,1509053183.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:23.228Z,1509053183.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:23.614Z,1509053183.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:23.631Z,1509053183.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:24.003Z,1509053184.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:24.062Z,1509053184.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:24.397Z,1509053184.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:24.428Z,1509053184.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:24.796Z,1509053184.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:24.821Z,1509053184.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:25.201Z,1509053185.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:25.260Z,1509053185.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:25.597Z,1509053185.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:25.613Z,1509053185.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:25.996Z,1509053185.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:26.012Z,1509053186.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:26.394Z,1509053186.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:26.446Z,1509053186.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:26.796Z,1509053186.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:26.811Z,1509053186.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:27.209Z,1509053187.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:27.262Z,1509053187.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:27.603Z,1509053187.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:27.658Z,1509053187.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:27.998Z,1509053187.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:28.018Z,1509053188.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:28.392Z,1509053188.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:28.429Z,1509053188.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:28.786Z,1509053188.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:28.826Z,1509053188.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:29.205Z,1509053189.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:29.260Z,1509053189.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:29.599Z,1509053189.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:29.616Z,1509053189.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:29.998Z,1509053189.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:30.014Z,1509053190.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:30.406Z,1509053190.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:30.423Z,1509053190.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:30.798Z,1509053190.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:30.819Z,1509053190.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:31.207Z,1509053191.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:31.244Z,1509053191.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:31.600Z,1509053191.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:31.636Z,1509053191.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:31.998Z,1509053191.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:32.015Z,1509053192.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:32.399Z,1509053192.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:32.422Z,1509053192.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:32.822Z,1509053192.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:32.863Z,1509053192.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:33.211Z,1509053193.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:33.244Z,1509053193.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:33.591Z,1509053193.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:33.624Z,1509053193.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:33.994Z,1509053193.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:34.030Z,1509053194.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:34.400Z,1509053194.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:34.432Z,1509053194.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:34.801Z,1509053194.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:34.818Z,1509053194.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:35.204Z,1509053195.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:35.220Z,1509053195.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:35.604Z,1509053195.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:35.620Z,1509053195.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:36.085Z,1509053196.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:36.118Z,1509053196.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:36.488Z,1509053196.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:36.525Z,1509053196.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:36.889Z,1509053196.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:36.982Z,1509053196.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:37.294Z,1509053197.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:37.345Z,1509053197.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:37.709Z,1509053197.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:37.725Z,1509053197.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:38.107Z,1509053198.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:38.183Z,1509053198.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:38.487Z,1509053198.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:38.524Z,1509053198.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:38.917Z,1509053198.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:39.002Z,1509053199.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:39.296Z,1509053199.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:39.341Z,1509053199.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:39.704Z,1509053199.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:39.721Z,1509053199.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:40.102Z,1509053200.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:40.180Z,1509053200.180 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:40.180Z,1509053200.180 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 33
2017-10-26T21:26:40.180Z,1509053200.180 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:26:40.189Z,1509053200.189 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:40.189Z,1509053200.189 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 33
2017-10-26T21:26:40.189Z,1509053200.189 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:26:40.224Z,1509053200.224 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:26:40.224Z,1509053200.224 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:26:40.508Z,1509053200.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:40.576Z,1509053200.576 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:26:40.576Z,1509053200.576 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 33
2017-10-26T21:26:40.577Z,1509053200.577 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:26:40.577Z,1509053200.577 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 33
2017-10-26T21:26:40.922Z,1509053200.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:41.015Z,1509053201.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:26:41.015Z,1509053201.015 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:26:41.016Z,1509053201.016 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:26:41.023Z,1509053201.023 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:26:41.024Z,1509053201.024 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:26:41.024Z,1509053201.024 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:26:41.288Z,1509053201.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:41.348Z,1509053201.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:41.751Z,1509053201.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:41.766Z,1509053201.766 [PNI_TCM](ERROR): CRC does not match. Expected:0x49618 got:0x19446
2017-10-26T21:26:41.809Z,1509053201.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:42.102Z,1509053202.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:42.169Z,1509053202.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:42.505Z,1509053202.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:42.527Z,1509053202.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:42.890Z,1509053202.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:42.997Z,1509053202.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:43.294Z,1509053203.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:43.310Z,1509053203.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:43.702Z,1509053203.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:43.719Z,1509053203.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:44.101Z,1509053204.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:44.118Z,1509053204.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:44.511Z,1509053204.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:44.533Z,1509053204.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:44.932Z,1509053204.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:45.021Z,1509053205.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:45.296Z,1509053205.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:45.331Z,1509053205.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:45.698Z,1509053205.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:45.722Z,1509053205.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:46.095Z,1509053206.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:46.177Z,1509053206.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:46.500Z,1509053206.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:46.538Z,1509053206.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:46.902Z,1509053206.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:46.918Z,1509053206.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:47.291Z,1509053207.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:47.330Z,1509053207.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:47.690Z,1509053207.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:47.723Z,1509053207.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:48.095Z,1509053208.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:48.131Z,1509053208.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:48.494Z,1509053208.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:48.515Z,1509053208.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:48.910Z,1509053208.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:49.008Z,1509053209.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:49.304Z,1509053209.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:49.348Z,1509053209.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:49.703Z,1509053209.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:49.720Z,1509053209.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:50.100Z,1509053210.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:50.122Z,1509053210.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:50.492Z,1509053210.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:50.520Z,1509053210.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:50.925Z,1509053210.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:51.009Z,1509053211.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:51.293Z,1509053211.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:51.339Z,1509053211.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:51.698Z,1509053211.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:51.726Z,1509053211.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:52.088Z,1509053212.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:52.171Z,1509053212.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:52.494Z,1509053212.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:52.511Z,1509053212.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:52.937Z,1509053212.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:53.010Z,1509053213.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:53.307Z,1509053213.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:53.383Z,1509053213.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:53.710Z,1509053213.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:53.741Z,1509053213.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:54.122Z,1509053214.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:54.194Z,1509053214.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:54.490Z,1509053214.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:54.506Z,1509053214.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:54.940Z,1509053214.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:55.031Z,1509053215.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:55.303Z,1509053215.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:55.319Z,1509053215.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:55.709Z,1509053215.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:55.763Z,1509053215.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:56.096Z,1509053216.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:56.118Z,1509053216.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:56.501Z,1509053216.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:56.516Z,1509053216.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:56.923Z,1509053216.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:56.995Z,1509053216.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:57.294Z,1509053217.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:57.311Z,1509053217.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:57.699Z,1509053217.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:57.721Z,1509053217.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:58.101Z,1509053218.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:58.118Z,1509053218.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:58.693Z,1509053218.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:58.709Z,1509053218.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:59.065Z,1509053219.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:59.081Z,1509053219.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:59.465Z,1509053219.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:59.481Z,1509053219.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:26:59.870Z,1509053219.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:26:59.887Z,1509053219.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:00.261Z,1509053220.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:00.289Z,1509053220.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:00.662Z,1509053220.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:00.690Z,1509053220.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:01.085Z,1509053221.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:01.101Z,1509053221.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:01.463Z,1509053221.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:01.492Z,1509053221.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:01.871Z,1509053221.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:01.919Z,1509053221.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:02.266Z,1509053222.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:02.282Z,1509053222.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:02.667Z,1509053222.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:02.690Z,1509053222.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:03.081Z,1509053223.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:03.102Z,1509053223.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:03.463Z,1509053223.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:03.492Z,1509053223.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:03.885Z,1509053223.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:03.906Z,1509053223.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:04.271Z,1509053224.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:04.295Z,1509053224.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:04.661Z,1509053224.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:04.690Z,1509053224.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:05.069Z,1509053225.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:05.107Z,1509053225.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:05.472Z,1509053225.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:05.488Z,1509053225.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:05.856Z,1509053225.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:05.894Z,1509053225.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:06.252Z,1509053226.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:06.311Z,1509053226.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:06.655Z,1509053226.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:06.692Z,1509053226.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:07.060Z,1509053227.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:07.097Z,1509053227.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:07.464Z,1509053227.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:07.506Z,1509053227.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:07.865Z,1509053227.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:07.882Z,1509053227.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:08.258Z,1509053228.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:08.283Z,1509053228.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:08.681Z,1509053228.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:08.738Z,1509053228.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:09.082Z,1509053229.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:09.098Z,1509053229.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:09.463Z,1509053229.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:09.531Z,1509053229.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:09.867Z,1509053229.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:09.897Z,1509053229.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:10.269Z,1509053230.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:10.326Z,1509053230.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:10.662Z,1509053230.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:10.678Z,1509053230.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:11.060Z,1509053231.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:11.093Z,1509053231.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:11.437Z,1509053231.437 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:27:11.476Z,1509053231.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:11.493Z,1509053231.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:11.872Z,1509053231.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:11.889Z,1509053231.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:12.256Z,1509053232.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:12.285Z,1509053232.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:12.658Z,1509053232.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:12.695Z,1509053232.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:13.061Z,1509053233.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:13.103Z,1509053233.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:13.466Z,1509053233.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:13.498Z,1509053233.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:13.866Z,1509053233.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:13.907Z,1509053233.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:14.264Z,1509053234.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:14.291Z,1509053234.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:14.669Z,1509053234.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:14.686Z,1509053234.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:15.072Z,1509053235.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:15.093Z,1509053235.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:15.480Z,1509053235.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:15.504Z,1509053235.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:15.869Z,1509053235.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:15.886Z,1509053235.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:16.254Z,1509053236.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:16.291Z,1509053236.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:16.663Z,1509053236.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:16.691Z,1509053236.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:17.067Z,1509053237.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:17.099Z,1509053237.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:17.468Z,1509053237.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:17.498Z,1509053237.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:17.868Z,1509053237.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:17.901Z,1509053237.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:18.269Z,1509053238.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:18.286Z,1509053238.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:18.667Z,1509053238.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:18.684Z,1509053238.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:19.063Z,1509053239.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:19.079Z,1509053239.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:19.473Z,1509053239.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:19.490Z,1509053239.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:19.864Z,1509053239.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:19.893Z,1509053239.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:20.260Z,1509053240.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:20.295Z,1509053240.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:20.657Z,1509053240.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:20.695Z,1509053240.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:21.068Z,1509053241.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:21.127Z,1509053241.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:21.466Z,1509053241.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:21.482Z,1509053241.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:21.865Z,1509053241.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:21.881Z,1509053241.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:22.272Z,1509053242.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:22.324Z,1509053242.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:22.665Z,1509053242.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:22.681Z,1509053242.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:23.075Z,1509053243.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:23.144Z,1509053243.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:23.463Z,1509053243.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:23.499Z,1509053243.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:23.858Z,1509053243.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:23.915Z,1509053243.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:24.261Z,1509053244.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:24.311Z,1509053244.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:24.670Z,1509053244.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:24.686Z,1509053244.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:25.067Z,1509053245.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:25.083Z,1509053245.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:25.457Z,1509053245.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:25.496Z,1509053245.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:25.875Z,1509053245.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:25.891Z,1509053245.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:26.281Z,1509053246.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:26.298Z,1509053246.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:26.656Z,1509053246.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:26.690Z,1509053246.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:27.053Z,1509053247.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:27.093Z,1509053247.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:27.461Z,1509053247.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:27.490Z,1509053247.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:27.871Z,1509053247.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:27.899Z,1509053247.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:28.276Z,1509053248.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:28.299Z,1509053248.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:28.657Z,1509053248.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:28.695Z,1509053248.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:29.059Z,1509053249.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:29.087Z,1509053249.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:29.481Z,1509053249.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:29.498Z,1509053249.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:29.857Z,1509053249.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:29.893Z,1509053249.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:30.267Z,1509053250.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:30.318Z,1509053250.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:30.663Z,1509053250.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:30.681Z,1509053250.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:31.069Z,1509053251.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:31.107Z,1509053251.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:31.468Z,1509053251.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:31.485Z,1509053251.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:31.863Z,1509053251.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:31.879Z,1509053251.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:32.410Z,1509053252.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:32.443Z,1509053252.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:32.799Z,1509053252.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:32.836Z,1509053252.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:33.212Z,1509053253.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:33.238Z,1509053253.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:33.606Z,1509053253.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:33.626Z,1509053253.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:34.004Z,1509053254.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:34.032Z,1509053254.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:34.413Z,1509053254.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:34.441Z,1509053254.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:34.807Z,1509053254.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:34.876Z,1509053254.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:35.208Z,1509053255.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:35.224Z,1509053255.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:35.608Z,1509053255.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:35.625Z,1509053255.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:36.008Z,1509053256.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:36.073Z,1509053256.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:36.417Z,1509053256.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:36.439Z,1509053256.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:36.818Z,1509053256.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:36.837Z,1509053256.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:37.208Z,1509053257.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:37.283Z,1509053257.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:37.607Z,1509053257.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:37.630Z,1509053257.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:38.045Z,1509053258.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:38.120Z,1509053258.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:38.416Z,1509053258.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:38.491Z,1509053258.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:38.831Z,1509053258.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:38.847Z,1509053258.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:39.210Z,1509053259.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:39.243Z,1509053259.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:39.610Z,1509053259.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:39.627Z,1509053259.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:40.015Z,1509053260.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:40.032Z,1509053260.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:40.404Z,1509053260.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:40.426Z,1509053260.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:40.810Z,1509053260.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:40.827Z,1509053260.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:41.227Z,1509053261.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:41.244Z,1509053261.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:41.623Z,1509053261.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:41.640Z,1509053261.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:42.041Z,1509053262.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:42.062Z,1509053262.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:42.412Z,1509053262.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:42.429Z,1509053262.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:42.811Z,1509053262.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:42.828Z,1509053262.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:43.224Z,1509053263.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:43.240Z,1509053263.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:43.642Z,1509053263.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:43.701Z,1509053263.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:44.017Z,1509053264.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:44.044Z,1509053264.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:44.410Z,1509053264.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:44.426Z,1509053264.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:44.814Z,1509053264.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:44.842Z,1509053264.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:45.375Z,1509053265.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:45.403Z,1509053265.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:45.786Z,1509053265.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:45.805Z,1509053265.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:46.192Z,1509053266.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:46.210Z,1509053266.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:46.582Z,1509053266.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:46.614Z,1509053266.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:47.043Z,1509053267.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:47.095Z,1509053267.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:47.386Z,1509053267.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:47.407Z,1509053267.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:47.767Z,1509053267.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:47.814Z,1509053267.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:48.202Z,1509053268.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:48.218Z,1509053268.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:48.579Z,1509053268.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:48.615Z,1509053268.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:48.998Z,1509053268.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:49.044Z,1509053269.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:49.394Z,1509053269.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:49.427Z,1509053269.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:49.771Z,1509053269.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:49.803Z,1509053269.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:50.196Z,1509053270.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:50.233Z,1509053270.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:50.572Z,1509053270.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:50.588Z,1509053270.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:51.013Z,1509053271.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:51.029Z,1509053271.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:51.376Z,1509053271.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:51.441Z,1509053271.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:51.788Z,1509053271.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:51.813Z,1509053271.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:52.193Z,1509053272.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:52.243Z,1509053272.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:52.575Z,1509053272.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:52.638Z,1509053272.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:53.016Z,1509053273.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:53.065Z,1509053273.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:53.397Z,1509053273.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:53.426Z,1509053273.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:53.799Z,1509053273.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:53.832Z,1509053273.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:54.180Z,1509053274.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:54.219Z,1509053274.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:54.575Z,1509053274.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:54.618Z,1509053274.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:55.026Z,1509053275.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:55.066Z,1509053275.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:55.380Z,1509053275.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:55.410Z,1509053275.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:55.793Z,1509053275.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:55.824Z,1509053275.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:56.191Z,1509053276.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:56.220Z,1509053276.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:56.581Z,1509053276.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:56.605Z,1509053276.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:57.022Z,1509053277.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:57.064Z,1509053277.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:57.376Z,1509053277.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:57.408Z,1509053277.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:57.765Z,1509053277.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:57.815Z,1509053277.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:58.193Z,1509053278.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:58.210Z,1509053278.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:58.584Z,1509053278.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:58.609Z,1509053278.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:59.001Z,1509053279.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:59.053Z,1509053279.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:59.384Z,1509053279.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:59.416Z,1509053279.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:27:59.778Z,1509053279.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:27:59.825Z,1509053279.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:00.187Z,1509053280.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:00.214Z,1509053280.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:00.579Z,1509053280.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:00.617Z,1509053280.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:01.027Z,1509053281.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:01.050Z,1509053281.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:01.387Z,1509053281.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:01.403Z,1509053281.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:01.786Z,1509053281.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:01.806Z,1509053281.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:02.194Z,1509053282.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:02.214Z,1509053282.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:02.565Z,1509053282.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:02.611Z,1509053282.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:03.029Z,1509053283.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:03.070Z,1509053283.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:03.396Z,1509053283.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:03.412Z,1509053283.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:03.783Z,1509053283.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:03.807Z,1509053283.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:04.190Z,1509053284.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:04.245Z,1509053284.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:04.591Z,1509053284.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:04.647Z,1509053284.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:05.010Z,1509053285.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:05.067Z,1509053285.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:05.369Z,1509053285.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:05.405Z,1509053285.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:05.864Z,1509053285.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:05.883Z,1509053285.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:06.262Z,1509053286.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:06.322Z,1509053286.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:06.666Z,1509053286.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:06.682Z,1509053286.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:07.069Z,1509053287.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:07.117Z,1509053287.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:07.471Z,1509053287.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:07.488Z,1509053287.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:07.873Z,1509053287.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:07.923Z,1509053287.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:08.275Z,1509053288.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:08.291Z,1509053288.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:08.672Z,1509053288.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:08.689Z,1509053288.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:09.076Z,1509053289.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:09.095Z,1509053289.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:09.471Z,1509053289.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:09.496Z,1509053289.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:09.861Z,1509053289.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:09.898Z,1509053289.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:10.260Z,1509053290.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:10.295Z,1509053290.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:10.662Z,1509053290.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:10.692Z,1509053290.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:11.069Z,1509053291.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:11.090Z,1509053291.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:11.463Z,1509053291.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:11.491Z,1509053291.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:11.839Z,1509053291.839 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:28:11.882Z,1509053291.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:11.899Z,1509053291.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:12.257Z,1509053292.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:12.290Z,1509053292.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:12.657Z,1509053292.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:12.698Z,1509053292.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:13.060Z,1509053293.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:13.097Z,1509053293.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:13.470Z,1509053293.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:13.494Z,1509053293.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:13.867Z,1509053293.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:13.884Z,1509053293.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:14.260Z,1509053294.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:14.289Z,1509053294.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:14.665Z,1509053294.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:14.682Z,1509053294.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:15.070Z,1509053295.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:15.087Z,1509053295.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:15.468Z,1509053295.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:15.493Z,1509053295.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:15.860Z,1509053295.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:15.888Z,1509053295.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:16.255Z,1509053296.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:16.292Z,1509053296.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:16.662Z,1509053296.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:16.694Z,1509053296.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:17.068Z,1509053297.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:17.100Z,1509053297.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:17.473Z,1509053297.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:17.502Z,1509053297.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:17.870Z,1509053297.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:17.887Z,1509053297.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:18.266Z,1509053298.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:18.287Z,1509053298.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:18.668Z,1509053298.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:18.684Z,1509053298.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:19.059Z,1509053299.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:19.087Z,1509053299.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:19.456Z,1509053299.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:19.493Z,1509053299.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:19.865Z,1509053299.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:19.950Z,1509053299.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:20.268Z,1509053300.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:20.301Z,1509053300.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:20.659Z,1509053300.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:20.676Z,1509053300.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:21.067Z,1509053301.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:21.119Z,1509053301.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:21.470Z,1509053301.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:21.486Z,1509053301.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:21.865Z,1509053301.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:21.920Z,1509053301.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:22.271Z,1509053302.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:22.321Z,1509053302.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:22.676Z,1509053302.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:22.715Z,1509053302.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:23.054Z,1509053303.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:23.094Z,1509053303.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:23.454Z,1509053303.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:23.495Z,1509053303.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:23.857Z,1509053303.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:23.893Z,1509053303.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:24.271Z,1509053304.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:24.313Z,1509053304.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:24.668Z,1509053304.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:24.684Z,1509053304.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:25.066Z,1509053305.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:25.082Z,1509053305.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:25.471Z,1509053305.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:25.492Z,1509053305.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:25.862Z,1509053305.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:25.890Z,1509053305.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:26.277Z,1509053306.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:26.299Z,1509053306.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:26.661Z,1509053306.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:26.698Z,1509053306.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:27.060Z,1509053307.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:27.093Z,1509053307.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:27.456Z,1509053307.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:27.473Z,1509053307.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:27.865Z,1509053307.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:27.897Z,1509053307.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:28.259Z,1509053308.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:28.275Z,1509053308.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:28.660Z,1509053308.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:28.676Z,1509053308.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:29.064Z,1509053309.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:29.080Z,1509053309.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:29.464Z,1509053309.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:29.493Z,1509053309.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:29.869Z,1509053309.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:29.901Z,1509053309.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:30.257Z,1509053310.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:30.298Z,1509053310.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:30.669Z,1509053310.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:30.701Z,1509053310.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:31.068Z,1509053311.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:31.124Z,1509053311.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:31.470Z,1509053311.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:31.487Z,1509053311.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:31.867Z,1509053311.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:31.883Z,1509053311.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:32.271Z,1509053312.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:32.289Z,1509053312.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:32.673Z,1509053312.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:32.690Z,1509053312.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:33.061Z,1509053313.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:33.089Z,1509053313.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:33.481Z,1509053313.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:33.497Z,1509053313.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:33.862Z,1509053313.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:33.898Z,1509053313.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:34.263Z,1509053314.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:34.304Z,1509053314.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:34.663Z,1509053314.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:34.737Z,1509053314.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:35.063Z,1509053315.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:35.087Z,1509053315.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:35.483Z,1509053315.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:35.530Z,1509053315.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:35.864Z,1509053315.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:35.889Z,1509053315.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:36.266Z,1509053316.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:36.325Z,1509053316.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:36.659Z,1509053316.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:36.728Z,1509053316.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:37.057Z,1509053317.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:37.089Z,1509053317.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:37.460Z,1509053317.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:37.508Z,1509053317.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:37.866Z,1509053317.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:37.896Z,1509053317.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:38.259Z,1509053318.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:38.284Z,1509053318.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:38.657Z,1509053318.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:38.674Z,1509053318.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:39.065Z,1509053319.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:39.082Z,1509053319.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:39.465Z,1509053319.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:39.482Z,1509053319.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:39.871Z,1509053319.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:39.888Z,1509053319.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:40.269Z,1509053320.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:40.285Z,1509053320.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:40.671Z,1509053320.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:40.686Z,1509053320.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:41.054Z,1509053321.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:41.082Z,1509053321.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:41.483Z,1509053321.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:41.499Z,1509053321.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:41.866Z,1509053321.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:41.890Z,1509053321.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:42.266Z,1509053322.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:42.294Z,1509053322.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:42.671Z,1509053322.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:42.695Z,1509053322.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:43.061Z,1509053323.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:43.082Z,1509053323.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:43.462Z,1509053323.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:43.498Z,1509053323.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:43.868Z,1509053323.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:43.884Z,1509053323.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:44.276Z,1509053324.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:44.292Z,1509053324.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:44.686Z,1509053324.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:44.707Z,1509053324.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:45.076Z,1509053325.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:45.113Z,1509053325.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:45.469Z,1509053325.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:45.500Z,1509053325.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:45.870Z,1509053325.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:45.903Z,1509053325.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:46.265Z,1509053326.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:46.282Z,1509053326.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:46.671Z,1509053326.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:46.717Z,1509053326.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:47.059Z,1509053327.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:47.099Z,1509053327.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:47.464Z,1509053327.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:47.492Z,1509053327.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:47.873Z,1509053327.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:47.912Z,1509053327.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:48.274Z,1509053328.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:48.341Z,1509053328.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:48.661Z,1509053328.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:48.730Z,1509053328.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:49.064Z,1509053329.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:49.084Z,1509053329.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:49.475Z,1509053329.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:49.523Z,1509053329.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:49.865Z,1509053329.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:49.906Z,1509053329.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:50.264Z,1509053330.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:50.332Z,1509053330.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:50.664Z,1509053330.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:50.735Z,1509053330.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:51.104Z,1509053331.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:51.171Z,1509053331.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:51.467Z,1509053331.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:51.484Z,1509053331.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:51.865Z,1509053331.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:51.882Z,1509053331.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:52.272Z,1509053332.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:52.288Z,1509053332.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:52.669Z,1509053332.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:52.686Z,1509053332.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:53.075Z,1509053333.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:53.091Z,1509053333.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:53.461Z,1509053333.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:53.495Z,1509053333.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:53.861Z,1509053333.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:53.900Z,1509053333.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:54.255Z,1509053334.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:54.271Z,1509053334.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:54.666Z,1509053334.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:54.694Z,1509053334.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:55.067Z,1509053335.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:55.084Z,1509053335.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:55.473Z,1509053335.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:55.490Z,1509053335.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:55.863Z,1509053335.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:55.912Z,1509053335.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:56.257Z,1509053336.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:56.292Z,1509053336.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:56.658Z,1509053336.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:56.690Z,1509053336.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:57.054Z,1509053337.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:57.095Z,1509053337.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:57.457Z,1509053337.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:57.473Z,1509053337.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:57.867Z,1509053337.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:57.889Z,1509053337.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:58.266Z,1509053338.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:58.295Z,1509053338.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:58.667Z,1509053338.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:58.684Z,1509053338.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:59.072Z,1509053339.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:59.091Z,1509053339.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:59.470Z,1509053339.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:59.496Z,1509053339.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:28:59.887Z,1509053339.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:28:59.914Z,1509053339.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:00.274Z,1509053340.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:00.301Z,1509053340.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:00.673Z,1509053340.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:00.689Z,1509053340.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:01.080Z,1509053341.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:01.097Z,1509053341.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:01.465Z,1509053341.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:01.498Z,1509053341.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:01.862Z,1509053341.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:01.895Z,1509053341.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:02.263Z,1509053342.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:02.279Z,1509053342.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:02.661Z,1509053342.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:02.736Z,1509053342.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:03.081Z,1509053343.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:03.114Z,1509053343.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:03.473Z,1509053343.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:03.490Z,1509053343.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:03.861Z,1509053343.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:03.924Z,1509053343.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:04.265Z,1509053344.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:04.295Z,1509053344.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:04.658Z,1509053344.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:04.704Z,1509053344.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:05.062Z,1509053345.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:05.155Z,1509053345.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:05.467Z,1509053345.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:05.499Z,1509053345.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:05.861Z,1509053345.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:05.894Z,1509053345.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:06.268Z,1509053346.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:06.284Z,1509053346.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:06.662Z,1509053346.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:06.678Z,1509053346.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:07.075Z,1509053347.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:07.109Z,1509053347.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:07.470Z,1509053347.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:07.487Z,1509053347.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:07.857Z,1509053347.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:07.926Z,1509053347.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:08.256Z,1509053348.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:08.289Z,1509053348.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:08.656Z,1509053348.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:08.693Z,1509053348.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:09.061Z,1509053349.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:09.109Z,1509053349.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:09.469Z,1509053349.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:09.497Z,1509053349.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:09.866Z,1509053349.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:09.882Z,1509053349.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:10.265Z,1509053350.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:10.281Z,1509053350.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:10.668Z,1509053350.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:10.685Z,1509053350.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:11.065Z,1509053351.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:11.081Z,1509053351.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:11.463Z,1509053351.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:11.502Z,1509053351.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:11.844Z,1509053351.844 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:29:11.869Z,1509053351.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:11.906Z,1509053351.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:12.262Z,1509053352.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:12.296Z,1509053352.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:12.656Z,1509053352.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:12.678Z,1509053352.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:13.076Z,1509053353.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:13.108Z,1509053353.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:13.471Z,1509053353.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:13.488Z,1509053353.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:13.866Z,1509053353.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:13.895Z,1509053353.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:14.276Z,1509053354.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:14.298Z,1509053354.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:14.658Z,1509053354.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:14.688Z,1509053354.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:15.087Z,1509053355.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:15.104Z,1509053355.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:15.463Z,1509053355.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:15.491Z,1509053355.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:15.857Z,1509053355.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:15.874Z,1509053355.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:16.272Z,1509053356.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:16.305Z,1509053356.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:16.666Z,1509053356.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:16.683Z,1509053356.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:17.063Z,1509053357.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:17.168Z,1509053357.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:17.464Z,1509053357.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:17.488Z,1509053357.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:17.856Z,1509053357.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:17.884Z,1509053357.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:18.264Z,1509053358.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:18.341Z,1509053358.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:18.657Z,1509053358.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:18.694Z,1509053358.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:19.249Z,1509053359.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:19.306Z,1509053359.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:19.651Z,1509053359.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:19.702Z,1509053359.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:20.032Z,1509053360.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:20.061Z,1509053360.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:20.435Z,1509053360.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:20.467Z,1509053360.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:20.833Z,1509053360.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:20.866Z,1509053360.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:21.250Z,1509053361.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:21.299Z,1509053361.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:21.640Z,1509053361.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:21.656Z,1509053361.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:22.043Z,1509053362.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:22.059Z,1509053362.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:22.448Z,1509053362.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:22.465Z,1509053362.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:22.849Z,1509053362.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:22.873Z,1509053362.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:23.231Z,1509053363.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:23.248Z,1509053363.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:23.648Z,1509053363.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:23.685Z,1509053363.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:24.054Z,1509053364.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:24.070Z,1509053364.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:24.444Z,1509053364.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:24.468Z,1509053364.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:24.836Z,1509053364.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:24.879Z,1509053364.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:25.246Z,1509053365.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:25.272Z,1509053365.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:25.643Z,1509053365.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:25.671Z,1509053365.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:26.043Z,1509053366.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:26.079Z,1509053366.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:26.436Z,1509053366.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:26.476Z,1509053366.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:26.843Z,1509053366.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:26.859Z,1509053366.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:27.251Z,1509053367.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:27.267Z,1509053367.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:27.644Z,1509053367.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:27.665Z,1509053367.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:28.045Z,1509053368.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:28.062Z,1509053368.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:28.451Z,1509053368.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:28.497Z,1509053368.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:28.832Z,1509053368.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:28.865Z,1509053368.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:29.239Z,1509053369.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:29.267Z,1509053369.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:29.638Z,1509053369.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:29.667Z,1509053369.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:30.046Z,1509053370.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:30.071Z,1509053370.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:30.447Z,1509053370.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:30.490Z,1509053370.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:31.012Z,1509053371.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:31.059Z,1509053371.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:31.392Z,1509053371.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:31.427Z,1509053371.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:31.795Z,1509053371.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:31.873Z,1509053371.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:32.203Z,1509053372.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:32.219Z,1509053372.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:32.602Z,1509053372.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:32.618Z,1509053372.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:33.037Z,1509053373.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:33.099Z,1509053373.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:33.402Z,1509053373.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:33.435Z,1509053373.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:33.804Z,1509053373.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:33.864Z,1509053373.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:34.206Z,1509053374.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:34.264Z,1509053374.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:34.606Z,1509053374.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:34.622Z,1509053374.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:35.025Z,1509053375.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:35.066Z,1509053375.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:35.392Z,1509053375.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:35.427Z,1509053375.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:35.799Z,1509053375.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:35.832Z,1509053375.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:36.203Z,1509053376.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:36.229Z,1509053376.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:36.611Z,1509053376.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:36.632Z,1509053376.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:37.007Z,1509053377.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:37.049Z,1509053377.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:37.407Z,1509053377.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:37.439Z,1509053377.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:37.802Z,1509053377.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:37.818Z,1509053377.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:38.203Z,1509053378.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:38.219Z,1509053378.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:38.606Z,1509053378.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:38.646Z,1509053378.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:39.005Z,1509053379.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:39.023Z,1509053379.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:39.399Z,1509053379.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:39.441Z,1509053379.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:39.796Z,1509053379.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:39.841Z,1509053379.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:40.193Z,1509053380.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:40.221Z,1509053380.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:40.611Z,1509053380.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:40.633Z,1509053380.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:41.025Z,1509053381.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:41.054Z,1509053381.054 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:41.054Z,1509053381.054 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 34
2017-10-26T21:29:41.054Z,1509053381.054 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:29:41.067Z,1509053381.067 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:41.067Z,1509053381.067 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 34
2017-10-26T21:29:41.067Z,1509053381.067 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:29:41.180Z,1509053381.180 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:29:41.181Z,1509053381.181 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:29:41.406Z,1509053381.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:41.499Z,1509053381.499 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:29:41.499Z,1509053381.499 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 34
2017-10-26T21:29:41.500Z,1509053381.500 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:29:41.500Z,1509053381.500 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 34
2017-10-26T21:29:41.801Z,1509053381.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:41.829Z,1509053381.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:29:41.830Z,1509053381.830 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:29:41.830Z,1509053381.830 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:29:41.833Z,1509053381.833 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:29:41.833Z,1509053381.833 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:29:41.834Z,1509053381.834 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:29:42.203Z,1509053382.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:42.237Z,1509053382.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:42.596Z,1509053382.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:42.613Z,1509053382.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:43.030Z,1509053383.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:43.050Z,1509053383.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:43.406Z,1509053383.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:43.443Z,1509053383.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:43.485Z,1509053383.485 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:43.806Z,1509053383.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:43.822Z,1509053383.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:44.118Z,1509053384.118 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:44.213Z,1509053384.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:44.254Z,1509053384.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:44.579Z,1509053384.579 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:44.599Z,1509053384.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:44.653Z,1509053384.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:45.028Z,1509053385.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:45.063Z,1509053385.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:45.374Z,1509053385.374 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:45.415Z,1509053385.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:45.447Z,1509053385.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:45.782Z,1509053385.782 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:45.801Z,1509053385.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:45.838Z,1509053385.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:46.214Z,1509053386.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:46.279Z,1509053386.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:46.569Z,1509053386.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:46.613Z,1509053386.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:46.630Z,1509053386.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:47.006Z,1509053387.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:47.034Z,1509053387.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:47.364Z,1509053387.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:47.388Z,1509053387.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:47.461Z,1509053387.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:47.767Z,1509053387.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:47.806Z,1509053387.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:47.840Z,1509053387.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:48.212Z,1509053388.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:48.270Z,1509053388.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:48.561Z,1509053388.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:48.598Z,1509053388.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:48.666Z,1509053388.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:48.965Z,1509053388.965 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:49.024Z,1509053389.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:49.044Z,1509053389.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:49.410Z,1509053389.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:49.434Z,1509053389.434 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:49.438Z,1509053389.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:49.796Z,1509053389.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:49.837Z,1509053389.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:50.204Z,1509053390.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:50.219Z,1509053390.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:50.231Z,1509053390.231 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:50.593Z,1509053390.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:50.626Z,1509053390.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:50.636Z,1509053390.636 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:51.017Z,1509053391.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:51.046Z,1509053391.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:51.403Z,1509053391.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:51.429Z,1509053391.429 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:51.438Z,1509053391.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:51.799Z,1509053391.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:51.834Z,1509053391.834 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:51.844Z,1509053391.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:52.207Z,1509053392.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:52.243Z,1509053392.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:52.594Z,1509053392.594 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:52.601Z,1509053392.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:52.617Z,1509053392.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:53.005Z,1509053393.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:53.038Z,1509053393.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:53.384Z,1509053393.384 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:53.411Z,1509053393.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:53.432Z,1509053393.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:53.789Z,1509053393.789 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:53.804Z,1509053393.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:53.825Z,1509053393.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:54.201Z,1509053394.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:54.233Z,1509053394.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:54.562Z,1509053394.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:54.595Z,1509053394.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:54.627Z,1509053394.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:54.990Z,1509053394.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:55.033Z,1509053395.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:55.357Z,1509053395.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:55.391Z,1509053395.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:55.430Z,1509053395.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:55.768Z,1509053395.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:55.794Z,1509053395.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:55.830Z,1509053395.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:56.195Z,1509053396.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:56.237Z,1509053396.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:56.561Z,1509053396.561 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:56.596Z,1509053396.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:56.629Z,1509053396.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:57.050Z,1509053397.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:57.108Z,1509053397.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:57.370Z,1509053397.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:57.674Z,1509053397.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:57.711Z,1509053397.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:57.777Z,1509053397.777 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:58.077Z,1509053398.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:58.106Z,1509053398.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:58.476Z,1509053398.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:58.508Z,1509053398.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:58.564Z,1509053398.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:58.882Z,1509053398.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:58.990Z,1509053398.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:59.287Z,1509053399.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:59.304Z,1509053399.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:59.358Z,1509053399.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:59.688Z,1509053399.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:29:59.749Z,1509053399.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:29:59.762Z,1509053399.762 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:00.080Z,1509053400.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:00.125Z,1509053400.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:00.481Z,1509053400.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:00.541Z,1509053400.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:00.555Z,1509053400.555 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:00.883Z,1509053400.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:00.900Z,1509053400.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:01.280Z,1509053401.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:01.341Z,1509053401.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:01.353Z,1509053401.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:01.680Z,1509053401.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:01.712Z,1509053401.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:01.759Z,1509053401.759 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:02.087Z,1509053402.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:02.172Z,1509053402.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:02.484Z,1509053402.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:02.540Z,1509053402.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:02.554Z,1509053402.554 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:02.874Z,1509053402.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:02.929Z,1509053402.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:03.279Z,1509053403.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:03.307Z,1509053403.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:03.352Z,1509053403.352 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:03.687Z,1509053403.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:03.704Z,1509053403.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:03.756Z,1509053403.756 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:04.093Z,1509053404.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:04.115Z,1509053404.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:04.475Z,1509053404.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:04.526Z,1509053404.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:04.554Z,1509053404.554 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:04.880Z,1509053404.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:04.985Z,1509053404.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:05.294Z,1509053405.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:05.311Z,1509053405.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:05.351Z,1509053405.351 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:05.699Z,1509053405.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:05.716Z,1509053405.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:05.756Z,1509053405.756 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:06.081Z,1509053406.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:06.137Z,1509053406.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:06.505Z,1509053406.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:06.535Z,1509053406.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:06.558Z,1509053406.558 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:06.904Z,1509053406.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:06.963Z,1509053406.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:07.276Z,1509053407.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:07.304Z,1509053407.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:07.354Z,1509053407.354 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:07.680Z,1509053407.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:07.705Z,1509053407.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:07.759Z,1509053407.759 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:08.080Z,1509053408.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:08.113Z,1509053408.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:08.477Z,1509053408.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:08.507Z,1509053408.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:08.552Z,1509053408.552 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:08.882Z,1509053408.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:08.993Z,1509053408.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:09.282Z,1509053409.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:09.298Z,1509053409.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:09.349Z,1509053409.349 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:09.685Z,1509053409.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:09.708Z,1509053409.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:09.755Z,1509053409.755 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:10.084Z,1509053410.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:10.101Z,1509053410.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:10.547Z,1509053410.547 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:10.647Z,1509053410.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:10.664Z,1509053410.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:11.041Z,1509053411.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:11.062Z,1509053411.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:11.344Z,1509053411.344 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:11.435Z,1509053411.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:11.468Z,1509053411.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:11.749Z,1509053411.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:11.831Z,1509053411.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:11.869Z,1509053411.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:12.210Z,1509053412.210 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:30:12.240Z,1509053412.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:12.288Z,1509053412.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:12.546Z,1509053412.546 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:12.635Z,1509053412.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:12.644Z,1509053412.644 [BPC1](ERROR): Failed to parse message.
2017-10-26T21:30:12.644Z,1509053412.644 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T21:30:12.644Z,1509053412.644 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:30:12.644Z,1509053412.644 [BPC1](ERROR): Data Fault
2017-10-26T21:30:12.662Z,1509053412.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:12.785Z,1509053412.785 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:30:13.044Z,1509053413.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:13.077Z,1509053413.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:13.343Z,1509053413.343 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:13.439Z,1509053413.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:13.459Z,1509053413.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:13.748Z,1509053413.748 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:13.845Z,1509053413.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:13.862Z,1509053413.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:13.929Z,1509053413.929 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:30:13.929Z,1509053413.929 [BPC1] No Fault, FailCount= 1
2017-10-26T21:30:14.242Z,1509053414.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:14.335Z,1509053414.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:14.545Z,1509053414.545 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:14.650Z,1509053414.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:14.666Z,1509053414.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:14.952Z,1509053414.952 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:15.030Z,1509053415.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:15.073Z,1509053415.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:15.437Z,1509053415.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:15.470Z,1509053415.470 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:15.488Z,1509053415.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:15.839Z,1509053415.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:15.881Z,1509053415.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:16.245Z,1509053416.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:16.268Z,1509053416.268 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:16.300Z,1509053416.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:16.636Z,1509053416.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:16.653Z,1509053416.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:16.672Z,1509053416.672 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:17.040Z,1509053417.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:17.069Z,1509053417.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:17.378Z,1509053417.378 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:17.448Z,1509053417.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:17.464Z,1509053417.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:17.829Z,1509053417.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:17.857Z,1509053417.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:18.175Z,1509053418.175 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:18.233Z,1509053418.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:18.281Z,1509053418.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:18.582Z,1509053418.582 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:18.627Z,1509053418.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:18.656Z,1509053418.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:19.030Z,1509053419.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:19.070Z,1509053419.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:19.376Z,1509053419.376 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:19.434Z,1509053419.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:19.473Z,1509053419.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:19.843Z,1509053419.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:19.870Z,1509053419.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:20.175Z,1509053420.175 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:20.237Z,1509053420.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:20.265Z,1509053420.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:20.582Z,1509053420.582 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:20.632Z,1509053420.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:20.661Z,1509053420.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:21.039Z,1509053421.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:21.071Z,1509053421.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:21.385Z,1509053421.385 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:21.431Z,1509053421.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:21.471Z,1509053421.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:21.816Z,1509053421.816 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:21.837Z,1509053421.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:21.853Z,1509053421.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:22.236Z,1509053422.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:22.252Z,1509053422.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:22.570Z,1509053422.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:22.642Z,1509053422.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:22.664Z,1509053422.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:23.038Z,1509053423.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:23.055Z,1509053423.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:23.363Z,1509053423.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:23.432Z,1509053423.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:23.465Z,1509053423.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:23.770Z,1509053423.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:23.841Z,1509053423.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:23.865Z,1509053423.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:24.235Z,1509053424.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:24.252Z,1509053424.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:24.564Z,1509053424.564 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:24.642Z,1509053424.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:24.658Z,1509053424.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:25.040Z,1509053425.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:25.064Z,1509053425.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:25.362Z,1509053425.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:25.447Z,1509053425.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:25.479Z,1509053425.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:25.766Z,1509053425.766 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:25.843Z,1509053425.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:25.859Z,1509053425.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:26.243Z,1509053426.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:26.310Z,1509053426.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:26.560Z,1509053426.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:26.640Z,1509053426.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:26.661Z,1509053426.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:27.042Z,1509053427.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:27.071Z,1509053427.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:27.367Z,1509053427.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:27.445Z,1509053427.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:27.483Z,1509053427.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:27.769Z,1509053427.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:27.837Z,1509053427.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:27.896Z,1509053427.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:28.253Z,1509053428.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:28.270Z,1509053428.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:28.563Z,1509053428.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:28.637Z,1509053428.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:28.663Z,1509053428.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:28.972Z,1509053428.972 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:29.057Z,1509053429.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:29.118Z,1509053429.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:29.442Z,1509053429.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:29.474Z,1509053429.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:29.481Z,1509053429.481 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:29.831Z,1509053429.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:29.891Z,1509053429.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:30.236Z,1509053430.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:30.272Z,1509053430.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:30.278Z,1509053430.278 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:30.636Z,1509053430.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:30.688Z,1509053430.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:31.035Z,1509053431.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:31.050Z,1509053431.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:31.075Z,1509053431.075 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:31.432Z,1509053431.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:31.458Z,1509053431.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:31.481Z,1509053431.481 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:31.841Z,1509053431.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:31.857Z,1509053431.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:32.241Z,1509053432.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:32.263Z,1509053432.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:32.277Z,1509053432.277 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:32.645Z,1509053432.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:32.662Z,1509053432.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:32.681Z,1509053432.681 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:33.204Z,1509053433.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:33.224Z,1509053433.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:33.372Z,1509053433.372 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:33.615Z,1509053433.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:33.646Z,1509053433.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:34.008Z,1509053434.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:34.024Z,1509053434.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:34.168Z,1509053434.168 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:34.399Z,1509053434.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:34.424Z,1509053434.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:34.572Z,1509053434.572 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:34.813Z,1509053434.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:34.838Z,1509053434.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:35.202Z,1509053435.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:35.232Z,1509053435.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:35.369Z,1509053435.369 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:35.619Z,1509053435.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:35.639Z,1509053435.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:35.774Z,1509053435.774 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:36.018Z,1509053436.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:36.035Z,1509053436.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:36.413Z,1509053436.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:36.430Z,1509053436.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:36.563Z,1509053436.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:36.823Z,1509053436.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:36.839Z,1509053436.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:37.249Z,1509053437.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:37.299Z,1509053437.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:37.356Z,1509053437.356 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:37.638Z,1509053437.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:37.662Z,1509053437.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:37.761Z,1509053437.761 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:38.011Z,1509053438.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:38.044Z,1509053438.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:38.419Z,1509053438.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:38.448Z,1509053438.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:38.556Z,1509053438.556 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:38.816Z,1509053438.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:38.837Z,1509053438.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:39.218Z,1509053439.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:39.248Z,1509053439.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:39.352Z,1509053439.352 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:39.618Z,1509053439.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:39.644Z,1509053439.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:39.756Z,1509053439.756 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:40.009Z,1509053440.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:40.026Z,1509053440.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:40.409Z,1509053440.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:40.425Z,1509053440.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:40.549Z,1509053440.549 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:40.816Z,1509053440.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:40.840Z,1509053440.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:41.241Z,1509053441.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:41.281Z,1509053441.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:41.347Z,1509053441.347 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:41.609Z,1509053441.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:41.661Z,1509053441.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:41.752Z,1509053441.752 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:42.017Z,1509053442.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:42.050Z,1509053442.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:42.418Z,1509053442.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:42.449Z,1509053442.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:42.548Z,1509053442.548 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:42.845Z,1509053442.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:42.956Z,1509053442.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:43.210Z,1509053443.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:43.235Z,1509053443.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:43.346Z,1509053443.346 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:43.613Z,1509053443.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:43.635Z,1509053443.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:43.751Z,1509053443.751 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:44.035Z,1509053444.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:44.081Z,1509053444.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:44.420Z,1509053444.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:44.437Z,1509053444.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:44.548Z,1509053444.548 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:44.827Z,1509053444.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:44.879Z,1509053444.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:44.956Z,1509053444.956 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:45.227Z,1509053445.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:45.279Z,1509053445.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:45.441Z,1509053445.441 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:45.613Z,1509053445.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:45.637Z,1509053445.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:46.018Z,1509053446.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:46.035Z,1509053446.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:46.238Z,1509053446.238 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:46.482Z,1509053446.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:46.498Z,1509053446.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:46.643Z,1509053446.643 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:46.881Z,1509053446.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:46.996Z,1509053446.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:47.283Z,1509053447.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:47.299Z,1509053447.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:47.436Z,1509053447.436 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:47.678Z,1509053447.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:47.703Z,1509053447.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:47.841Z,1509053447.841 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:48.089Z,1509053448.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:48.105Z,1509053448.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:48.486Z,1509053448.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:48.506Z,1509053448.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:48.570Z,1509053448.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:48.895Z,1509053448.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:48.917Z,1509053448.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:49.278Z,1509053449.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:49.302Z,1509053449.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:49.364Z,1509053449.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:49.692Z,1509053449.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:49.725Z,1509053449.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:49.772Z,1509053449.772 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:50.089Z,1509053450.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:50.105Z,1509053450.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:50.493Z,1509053450.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:50.510Z,1509053450.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:50.565Z,1509053450.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:50.887Z,1509053450.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:50.999Z,1509053450.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:51.274Z,1509053451.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:51.290Z,1509053451.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:51.360Z,1509053451.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:51.710Z,1509053451.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:51.727Z,1509053451.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:51.767Z,1509053451.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:52.089Z,1509053452.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:52.123Z,1509053452.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:52.482Z,1509053452.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:52.499Z,1509053452.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:52.560Z,1509053452.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:52.883Z,1509053452.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:52.992Z,1509053452.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:53.294Z,1509053453.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:53.311Z,1509053453.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:53.357Z,1509053453.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:53.693Z,1509053453.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:53.710Z,1509053453.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:53.762Z,1509053453.762 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:54.076Z,1509053454.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:54.175Z,1509053454.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:54.473Z,1509053454.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:54.517Z,1509053454.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:54.558Z,1509053454.558 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:54.875Z,1509053454.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:54.892Z,1509053454.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:55.293Z,1509053455.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:55.330Z,1509053455.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:55.363Z,1509053455.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:55.678Z,1509053455.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:55.714Z,1509053455.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:55.768Z,1509053455.768 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:56.072Z,1509053456.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:56.168Z,1509053456.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:56.477Z,1509053456.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:56.501Z,1509053456.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:56.570Z,1509053456.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:56.882Z,1509053456.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:56.986Z,1509053456.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:57.284Z,1509053457.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:57.342Z,1509053457.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:57.370Z,1509053457.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:57.682Z,1509053457.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:57.702Z,1509053457.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:57.776Z,1509053457.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:58.099Z,1509053458.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:58.117Z,1509053458.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:58.493Z,1509053458.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:58.551Z,1509053458.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:58.565Z,1509053458.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:58.876Z,1509053458.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:58.908Z,1509053458.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:59.283Z,1509053459.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:59.321Z,1509053459.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:59.364Z,1509053459.364 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:59.677Z,1509053459.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:30:59.719Z,1509053459.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:30:59.771Z,1509053459.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:00.092Z,1509053460.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:00.113Z,1509053460.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:00.486Z,1509053460.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:00.502Z,1509053460.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:00.567Z,1509053460.567 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:00.918Z,1509053460.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:01.006Z,1509053461.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:01.279Z,1509053461.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:01.328Z,1509053461.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:01.362Z,1509053461.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:01.680Z,1509053461.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:01.717Z,1509053461.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:01.767Z,1509053461.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:02.082Z,1509053462.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:02.127Z,1509053462.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:02.481Z,1509053462.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:02.497Z,1509053462.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:02.562Z,1509053462.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:02.888Z,1509053462.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:02.904Z,1509053462.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:03.274Z,1509053463.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:03.309Z,1509053463.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:03.361Z,1509053463.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:03.675Z,1509053463.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:03.716Z,1509053463.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:03.767Z,1509053463.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:04.076Z,1509053464.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:04.139Z,1509053464.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:04.483Z,1509053464.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:04.499Z,1509053464.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:04.563Z,1509053464.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:04.878Z,1509053464.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:04.952Z,1509053464.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:05.289Z,1509053465.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:05.305Z,1509053465.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:05.360Z,1509053465.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:05.695Z,1509053465.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:05.711Z,1509053465.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:05.765Z,1509053465.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:06.075Z,1509053466.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:06.108Z,1509053466.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:06.479Z,1509053466.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:06.514Z,1509053466.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:06.562Z,1509053466.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:06.884Z,1509053466.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:06.904Z,1509053466.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:07.284Z,1509053467.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:07.317Z,1509053467.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:07.365Z,1509053467.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:07.700Z,1509053467.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:07.718Z,1509053467.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:07.773Z,1509053467.773 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:08.086Z,1509053468.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:08.102Z,1509053468.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:08.480Z,1509053468.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:08.518Z,1509053468.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:08.879Z,1509053468.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:08.912Z,1509053468.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:09.293Z,1509053469.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:09.309Z,1509053469.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:09.454Z,1509053469.454 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:09.685Z,1509053469.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:09.702Z,1509053469.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:10.082Z,1509053470.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:10.200Z,1509053470.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:10.252Z,1509053470.252 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:10.480Z,1509053470.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:10.523Z,1509053470.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:10.656Z,1509053470.656 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:10.886Z,1509053470.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:10.996Z,1509053470.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:11.296Z,1509053471.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:11.313Z,1509053471.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:11.429Z,1509053471.429 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:11.672Z,1509053471.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:11.717Z,1509053471.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:12.074Z,1509053472.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:12.102Z,1509053472.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:12.227Z,1509053472.227 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:12.459Z,1509053472.459 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:31:12.485Z,1509053472.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:12.554Z,1509053472.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:12.632Z,1509053472.632 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:12.881Z,1509053472.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:12.914Z,1509053472.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:13.289Z,1509053473.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:13.340Z,1509053473.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:13.424Z,1509053473.424 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:13.682Z,1509053473.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:13.747Z,1509053473.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:13.829Z,1509053473.829 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:14.082Z,1509053474.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:14.100Z,1509053474.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:14.493Z,1509053474.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:14.520Z,1509053474.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:14.563Z,1509053474.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:14.887Z,1509053474.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:14.905Z,1509053474.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:15.276Z,1509053475.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:15.323Z,1509053475.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:15.357Z,1509053475.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:15.683Z,1509053475.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:15.714Z,1509053475.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:15.765Z,1509053475.765 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:16.079Z,1509053476.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:16.099Z,1509053476.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:16.487Z,1509053476.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:16.503Z,1509053476.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:16.557Z,1509053476.557 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:16.886Z,1509053476.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:16.915Z,1509053476.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:17.284Z,1509053477.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:17.304Z,1509053477.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:17.355Z,1509053477.355 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:17.674Z,1509053477.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:17.690Z,1509053477.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:18.083Z,1509053478.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:18.099Z,1509053478.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:18.152Z,1509053478.152 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:18.487Z,1509053478.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:18.509Z,1509053478.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:18.565Z,1509053478.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:18.886Z,1509053478.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:18.902Z,1509053478.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:19.303Z,1509053479.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:19.319Z,1509053479.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:19.358Z,1509053479.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:19.683Z,1509053479.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:19.715Z,1509053479.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:19.763Z,1509053479.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:20.081Z,1509053480.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:20.125Z,1509053480.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:20.473Z,1509053480.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:20.510Z,1509053480.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:20.555Z,1509053480.555 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:20.879Z,1509053480.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:20.908Z,1509053480.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:21.301Z,1509053481.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:21.318Z,1509053481.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:21.353Z,1509053481.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:21.679Z,1509053481.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:21.704Z,1509053481.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:21.759Z,1509053481.759 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:22.089Z,1509053482.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:22.105Z,1509053482.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:22.494Z,1509053482.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:22.511Z,1509053482.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:22.551Z,1509053482.551 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:22.873Z,1509053482.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:22.911Z,1509053482.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:23.283Z,1509053483.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:23.299Z,1509053483.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:23.348Z,1509053483.348 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:23.678Z,1509053483.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:23.703Z,1509053483.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:23.753Z,1509053483.753 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:24.086Z,1509053484.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:24.164Z,1509053484.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:24.495Z,1509053484.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:24.517Z,1509053484.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:24.550Z,1509053484.550 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:24.889Z,1509053484.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:24.905Z,1509053484.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:25.313Z,1509053485.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:25.338Z,1509053485.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:25.347Z,1509053485.347 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:25.685Z,1509053485.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:25.752Z,1509053485.752 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:25.752Z,1509053485.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:26.078Z,1509053486.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:26.123Z,1509053486.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:26.493Z,1509053486.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:26.545Z,1509053486.545 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:26.549Z,1509053486.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:26.894Z,1509053486.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:26.919Z,1509053486.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:27.274Z,1509053487.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:27.325Z,1509053487.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:27.342Z,1509053487.342 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:27.680Z,1509053487.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:27.747Z,1509053487.747 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:27.752Z,1509053487.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:28.079Z,1509053488.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:28.103Z,1509053488.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:28.487Z,1509053488.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:28.504Z,1509053488.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:28.541Z,1509053488.541 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:28.889Z,1509053488.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:28.911Z,1509053488.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:29.283Z,1509053489.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:29.300Z,1509053489.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:29.338Z,1509053489.338 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:29.673Z,1509053489.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:29.710Z,1509053489.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:29.742Z,1509053489.742 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:30.072Z,1509053490.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:30.108Z,1509053490.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:30.188Z,1509053490.188 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:30.485Z,1509053490.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:30.502Z,1509053490.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:30.891Z,1509053490.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:30.907Z,1509053490.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:30.986Z,1509053490.986 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:31.274Z,1509053491.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:31.313Z,1509053491.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:31.493Z,1509053491.493 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:31.679Z,1509053491.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:31.713Z,1509053491.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:32.080Z,1509053492.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:32.096Z,1509053492.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:32.290Z,1509053492.290 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:32.483Z,1509053492.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:32.530Z,1509053492.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:32.694Z,1509053492.694 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:32.883Z,1509053492.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:32.899Z,1509053492.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:33.272Z,1509053493.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:33.288Z,1509053493.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:33.487Z,1509053493.487 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:33.681Z,1509053493.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:33.725Z,1509053493.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:33.892Z,1509053493.892 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:34.085Z,1509053494.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:34.103Z,1509053494.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:34.485Z,1509053494.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:34.501Z,1509053494.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:34.884Z,1509053494.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:34.974Z,1509053494.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:35.285Z,1509053495.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:35.302Z,1509053495.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:35.693Z,1509053495.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:35.721Z,1509053495.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:36.081Z,1509053496.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:36.111Z,1509053496.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:36.482Z,1509053496.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:36.510Z,1509053496.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:36.560Z,1509053496.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:36.882Z,1509053496.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:36.970Z,1509053496.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:37.287Z,1509053497.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:37.304Z,1509053497.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:37.358Z,1509053497.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:37.682Z,1509053497.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:37.708Z,1509053497.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:37.764Z,1509053497.764 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:38.090Z,1509053498.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:38.105Z,1509053498.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:38.473Z,1509053498.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:38.522Z,1509053498.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:38.555Z,1509053498.555 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:38.885Z,1509053498.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:38.981Z,1509053498.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:39.294Z,1509053499.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:39.319Z,1509053499.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:39.353Z,1509053499.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:39.688Z,1509053499.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:39.754Z,1509053499.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:39.762Z,1509053499.762 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:40.073Z,1509053500.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:40.112Z,1509053500.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:40.482Z,1509053500.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:40.516Z,1509053500.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:40.555Z,1509053500.555 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:40.878Z,1509053500.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:40.984Z,1509053500.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:41.273Z,1509053501.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:41.314Z,1509053501.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:41.352Z,1509053501.352 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:41.675Z,1509053501.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:41.728Z,1509053501.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:41.757Z,1509053501.757 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:42.081Z,1509053502.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:42.174Z,1509053502.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:42.480Z,1509053502.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:42.504Z,1509053502.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:42.551Z,1509053502.551 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:42.919Z,1509053502.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:42.972Z,1509053502.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:43.272Z,1509053503.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:43.309Z,1509053503.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:43.363Z,1509053503.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:43.677Z,1509053503.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:43.709Z,1509053503.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:43.769Z,1509053503.769 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:44.073Z,1509053504.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:44.094Z,1509053504.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:44.486Z,1509053504.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:44.502Z,1509053504.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:44.565Z,1509053504.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:44.953Z,1509053504.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:45.007Z,1509053505.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:45.282Z,1509053505.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:45.299Z,1509053505.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:45.363Z,1509053505.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:45.681Z,1509053505.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:45.697Z,1509053505.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:45.767Z,1509053505.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:46.091Z,1509053506.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:46.107Z,1509053506.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:46.480Z,1509053506.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:46.508Z,1509053506.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:46.565Z,1509053506.565 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:46.876Z,1509053506.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:46.949Z,1509053506.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:47.293Z,1509053507.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:47.309Z,1509053507.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:47.363Z,1509053507.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:47.688Z,1509053507.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:47.708Z,1509053507.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:47.770Z,1509053507.770 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:48.080Z,1509053508.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:48.109Z,1509053508.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:48.480Z,1509053508.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:48.513Z,1509053508.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:48.881Z,1509053508.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:48.969Z,1509053508.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:49.278Z,1509053509.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:49.338Z,1509053509.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:49.436Z,1509053509.436 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:49.688Z,1509053509.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:49.712Z,1509053509.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:50.077Z,1509053510.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:50.109Z,1509053510.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:50.233Z,1509053510.233 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:50.476Z,1509053510.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:50.518Z,1509053510.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:50.638Z,1509053510.638 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:50.880Z,1509053510.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:50.912Z,1509053510.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:51.291Z,1509053511.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:51.308Z,1509053511.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:51.696Z,1509053511.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:51.713Z,1509053511.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:52.093Z,1509053512.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:52.109Z,1509053512.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:52.479Z,1509053512.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:52.512Z,1509053512.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:52.883Z,1509053512.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:52.986Z,1509053512.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:53.284Z,1509053513.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:53.300Z,1509053513.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:53.686Z,1509053513.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:53.709Z,1509053513.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:54.089Z,1509053514.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:54.167Z,1509053514.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:54.492Z,1509053514.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:54.508Z,1509053514.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:54.883Z,1509053514.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:54.984Z,1509053514.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:55.293Z,1509053515.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:55.309Z,1509053515.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:55.684Z,1509053515.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:55.700Z,1509053515.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:56.092Z,1509053516.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:56.113Z,1509053516.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:56.477Z,1509053516.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:56.517Z,1509053516.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:56.875Z,1509053516.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:56.925Z,1509053516.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:57.290Z,1509053517.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:57.311Z,1509053517.311 [BPC1](ERROR): Failed to receive battery data
2017-10-26T21:31:57.312Z,1509053517.312 [BPC1] Communications Fault, FailCount= 1
2017-10-26T21:31:57.312Z,1509053517.312 [BPC1](ERROR): Communications Fault
2017-10-26T21:31:57.337Z,1509053517.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:57.437Z,1509053517.437 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T21:31:57.683Z,1509053517.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:57.716Z,1509053517.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:58.076Z,1509053518.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:58.097Z,1509053518.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:58.494Z,1509053518.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:58.511Z,1509053518.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:58.608Z,1509053518.608 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:31:58.608Z,1509053518.608 [BPC1] No Fault, FailCount= 1
2017-10-26T21:31:58.877Z,1509053518.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:59.096Z,1509053519.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:59.331Z,1509053519.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:59.371Z,1509053519.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:31:59.888Z,1509053519.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:31:59.929Z,1509053519.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:00.287Z,1509053520.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:00.328Z,1509053520.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:00.700Z,1509053520.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:00.766Z,1509053520.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:01.096Z,1509053521.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:01.113Z,1509053521.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:01.504Z,1509053521.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:01.522Z,1509053521.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:01.892Z,1509053521.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:01.916Z,1509053521.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:02.294Z,1509053522.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:02.323Z,1509053522.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:02.693Z,1509053522.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:02.710Z,1509053522.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:03.099Z,1509053523.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:03.116Z,1509053523.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:03.499Z,1509053523.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:03.515Z,1509053523.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:03.898Z,1509053523.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:03.915Z,1509053523.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:04.303Z,1509053524.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:04.326Z,1509053524.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:04.706Z,1509053524.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:04.722Z,1509053524.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:05.090Z,1509053525.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:05.118Z,1509053525.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:05.493Z,1509053525.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:05.531Z,1509053525.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:05.887Z,1509053525.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:05.924Z,1509053525.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:06.299Z,1509053526.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:06.340Z,1509053526.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:06.701Z,1509053526.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:06.727Z,1509053526.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:07.089Z,1509053527.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:07.105Z,1509053527.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:07.503Z,1509053527.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:07.536Z,1509053527.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:07.900Z,1509053527.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:07.916Z,1509053527.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:08.308Z,1509053528.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:08.325Z,1509053528.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:08.705Z,1509053528.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:08.721Z,1509053528.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:09.102Z,1509053529.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:09.119Z,1509053529.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:09.493Z,1509053529.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:09.530Z,1509053529.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:09.894Z,1509053529.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:09.922Z,1509053529.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:10.309Z,1509053530.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:10.335Z,1509053530.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:10.695Z,1509053530.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:10.723Z,1509053530.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:11.088Z,1509053531.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:11.116Z,1509053531.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:11.501Z,1509053531.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:11.518Z,1509053531.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:12.005Z,1509053532.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:12.064Z,1509053532.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:12.384Z,1509053532.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:12.416Z,1509053532.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:12.757Z,1509053532.757 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:32:12.784Z,1509053532.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:12.871Z,1509053532.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:13.186Z,1509053533.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:13.244Z,1509053533.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:13.593Z,1509053533.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:13.619Z,1509053533.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:13.986Z,1509053533.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:14.051Z,1509053534.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:14.392Z,1509053534.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:14.423Z,1509053534.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:14.794Z,1509053534.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:14.854Z,1509053534.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:15.225Z,1509053535.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:15.275Z,1509053535.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:15.598Z,1509053535.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:15.644Z,1509053535.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:15.994Z,1509053535.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:16.011Z,1509053536.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:16.392Z,1509053536.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:16.438Z,1509053536.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:16.776Z,1509053536.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:16.810Z,1509053536.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:17.197Z,1509053537.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:17.226Z,1509053537.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:17.600Z,1509053537.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:17.632Z,1509053537.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:17.986Z,1509053537.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:18.001Z,1509053538.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:18.402Z,1509053538.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:18.438Z,1509053538.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:18.801Z,1509053538.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:18.835Z,1509053538.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:19.223Z,1509053539.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:19.246Z,1509053539.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:19.582Z,1509053539.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:19.610Z,1509053539.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:19.995Z,1509053539.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:20.020Z,1509053540.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:20.407Z,1509053540.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:20.423Z,1509053540.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:20.809Z,1509053540.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:20.858Z,1509053540.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:21.196Z,1509053541.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:21.233Z,1509053541.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:21.593Z,1509053541.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:21.609Z,1509053541.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:21.995Z,1509053541.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:22.011Z,1509053542.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:22.391Z,1509053542.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:22.407Z,1509053542.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:22.789Z,1509053542.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:22.815Z,1509053542.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:23.198Z,1509053543.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:23.221Z,1509053543.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:23.602Z,1509053543.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:23.618Z,1509053543.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:23.985Z,1509053543.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:24.014Z,1509053544.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:24.387Z,1509053544.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:24.420Z,1509053544.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:24.780Z,1509053544.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:24.818Z,1509053544.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:25.192Z,1509053545.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:25.209Z,1509053545.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:25.589Z,1509053545.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:25.619Z,1509053545.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:25.999Z,1509053545.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:26.015Z,1509053546.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:26.398Z,1509053546.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:26.415Z,1509053546.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:26.787Z,1509053546.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:26.814Z,1509053546.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:27.200Z,1509053547.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:27.222Z,1509053547.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:27.605Z,1509053547.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:27.658Z,1509053547.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:27.991Z,1509053547.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:28.042Z,1509053548.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:28.386Z,1509053548.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:28.402Z,1509053548.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:28.792Z,1509053548.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:28.840Z,1509053548.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:29.195Z,1509053549.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:29.211Z,1509053549.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:29.590Z,1509053549.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:29.655Z,1509053549.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:30.004Z,1509053550.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:30.061Z,1509053550.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:30.385Z,1509053550.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:30.413Z,1509053550.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:30.784Z,1509053550.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:30.823Z,1509053550.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:31.199Z,1509053551.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:31.217Z,1509053551.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:31.593Z,1509053551.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:31.618Z,1509053551.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:31.999Z,1509053551.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:32.040Z,1509053552.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:32.408Z,1509053552.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:32.454Z,1509053552.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:32.792Z,1509053552.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:32.815Z,1509053552.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:33.203Z,1509053553.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:33.219Z,1509053553.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:33.583Z,1509053553.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:33.612Z,1509053553.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:33.987Z,1509053553.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:34.028Z,1509053554.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:34.390Z,1509053554.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:34.426Z,1509053554.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:34.791Z,1509053554.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:34.818Z,1509053554.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:35.178Z,1509053555.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:35.224Z,1509053555.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:35.606Z,1509053555.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:35.632Z,1509053555.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:36.021Z,1509053556.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:36.042Z,1509053556.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:36.381Z,1509053556.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:36.420Z,1509053556.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:36.811Z,1509053556.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:36.845Z,1509053556.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:37.206Z,1509053557.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:37.237Z,1509053557.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:37.636Z,1509053557.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:37.660Z,1509053557.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:37.992Z,1509053557.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:38.022Z,1509053558.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:38.392Z,1509053558.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:38.415Z,1509053558.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:38.793Z,1509053558.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:38.822Z,1509053558.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:39.196Z,1509053559.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:39.221Z,1509053559.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:39.596Z,1509053559.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:39.628Z,1509053559.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:39.993Z,1509053559.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:40.026Z,1509053560.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:40.389Z,1509053560.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:40.405Z,1509053560.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:40.789Z,1509053560.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:40.805Z,1509053560.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:41.184Z,1509053561.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:41.217Z,1509053561.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:41.587Z,1509053561.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:41.616Z,1509053561.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:41.987Z,1509053561.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:42.068Z,1509053562.068 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:42.069Z,1509053562.069 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 35
2017-10-26T21:32:42.069Z,1509053562.069 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:32:42.082Z,1509053562.082 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:42.082Z,1509053562.082 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 35
2017-10-26T21:32:42.082Z,1509053562.082 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:32:42.179Z,1509053562.179 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:32:42.179Z,1509053562.179 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:32:42.397Z,1509053562.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:42.535Z,1509053562.535 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:32:42.535Z,1509053562.535 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 35
2017-10-26T21:32:42.536Z,1509053562.536 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:32:42.536Z,1509053562.536 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 35
2017-10-26T21:32:42.792Z,1509053562.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:42.807Z,1509053562.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:32:42.808Z,1509053562.808 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:32:42.808Z,1509053562.808 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:32:42.811Z,1509053562.811 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:32:42.811Z,1509053562.811 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:32:42.811Z,1509053562.811 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:32:43.205Z,1509053563.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:43.256Z,1509053563.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:43.580Z,1509053563.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:43.611Z,1509053563.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:43.988Z,1509053563.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:44.054Z,1509053564.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:44.393Z,1509053564.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:44.445Z,1509053564.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:44.790Z,1509053564.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:44.809Z,1509053564.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:45.201Z,1509053565.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:45.218Z,1509053565.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:45.596Z,1509053565.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:45.613Z,1509053565.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:46.004Z,1509053566.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:46.025Z,1509053566.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:46.382Z,1509053566.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:46.415Z,1509053566.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:46.780Z,1509053566.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:46.816Z,1509053566.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:47.194Z,1509053567.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:47.226Z,1509053567.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:47.592Z,1509053567.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:47.608Z,1509053567.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:47.997Z,1509053567.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:48.039Z,1509053568.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:48.402Z,1509053568.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:48.418Z,1509053568.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:48.792Z,1509053568.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:48.841Z,1509053568.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:49.205Z,1509053569.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:49.257Z,1509053569.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:49.594Z,1509053569.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:49.616Z,1509053569.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:49.980Z,1509053569.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:50.022Z,1509053570.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:50.376Z,1509053570.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:50.417Z,1509053570.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:50.772Z,1509053570.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:50.788Z,1509053570.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:51.179Z,1509053571.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:51.223Z,1509053571.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:51.587Z,1509053571.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:51.619Z,1509053571.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:51.979Z,1509053571.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:51.000Z,1509053572.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:52.393Z,1509053572.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:52.410Z,1509053572.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:52.793Z,1509053572.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:52.810Z,1509053572.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:53.190Z,1509053573.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:53.219Z,1509053573.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:53.587Z,1509053573.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:53.604Z,1509053573.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:53.981Z,1509053573.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:54.013Z,1509053574.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:54.397Z,1509053574.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:54.414Z,1509053574.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:54.812Z,1509053574.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:54.829Z,1509053574.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:55.200Z,1509053575.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:55.216Z,1509053575.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:55.589Z,1509053575.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:55.606Z,1509053575.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:55.988Z,1509053575.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:56.017Z,1509053576.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:56.395Z,1509053576.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:56.479Z,1509053576.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:56.783Z,1509053576.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:56.812Z,1509053576.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:57.217Z,1509053577.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:57.234Z,1509053577.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:57.588Z,1509053577.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:57.644Z,1509053577.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:57.984Z,1509053577.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:58.000Z,1509053578.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:58.392Z,1509053578.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:58.445Z,1509053578.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:58.781Z,1509053578.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:58.838Z,1509053578.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:59.198Z,1509053579.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:59.219Z,1509053579.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:59.580Z,1509053579.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:32:59.617Z,1509053579.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:32:59.983Z,1509053579.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:00.011Z,1509053580.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:00.392Z,1509053580.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:00.429Z,1509053580.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:00.774Z,1509053580.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:00.791Z,1509053580.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:01.186Z,1509053581.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:01.220Z,1509053581.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:01.590Z,1509053581.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:01.623Z,1509053581.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:01.983Z,1509053581.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:02.019Z,1509053582.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:02.388Z,1509053582.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:02.417Z,1509053582.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:02.782Z,1509053582.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:02.810Z,1509053582.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:03.190Z,1509053583.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:03.232Z,1509053583.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:03.588Z,1509053583.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:03.605Z,1509053583.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:03.987Z,1509053583.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:04.004Z,1509053584.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:04.393Z,1509053584.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:04.408Z,1509053584.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:04.786Z,1509053584.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:04.819Z,1509053584.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:05.191Z,1509053585.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:05.207Z,1509053585.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:05.590Z,1509053585.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:05.606Z,1509053585.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:05.987Z,1509053585.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:06.003Z,1509053586.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:06.391Z,1509053586.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:06.413Z,1509053586.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:06.790Z,1509053586.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:06.806Z,1509053586.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:07.212Z,1509053587.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:07.231Z,1509053587.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:07.585Z,1509053587.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:07.622Z,1509053587.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:07.988Z,1509053587.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:08.021Z,1509053588.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:08.388Z,1509053588.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:08.421Z,1509053588.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:08.791Z,1509053588.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:08.807Z,1509053588.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:09.202Z,1509053589.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:09.218Z,1509053589.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:09.591Z,1509053589.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:09.619Z,1509053589.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:09.989Z,1509053589.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:10.006Z,1509053590.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:10.402Z,1509053590.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:10.418Z,1509053590.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:10.777Z,1509053590.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:10.829Z,1509053590.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:11.181Z,1509053591.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:11.273Z,1509053591.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:11.582Z,1509053591.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:11.612Z,1509053591.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:11.979Z,1509053591.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:12.019Z,1509053592.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:12.384Z,1509053592.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:12.421Z,1509053592.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:12.762Z,1509053592.762 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:33:12.792Z,1509053592.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:12.878Z,1509053592.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:13.191Z,1509053593.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:13.248Z,1509053593.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:13.589Z,1509053593.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:13.619Z,1509053593.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:13.997Z,1509053593.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:14.025Z,1509053594.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:14.394Z,1509053594.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:14.417Z,1509053594.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:14.782Z,1509053594.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:14.813Z,1509053594.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:15.198Z,1509053595.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:15.220Z,1509053595.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:15.588Z,1509053595.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:15.617Z,1509053595.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:15.982Z,1509053595.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:16.010Z,1509053596.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:16.389Z,1509053596.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:16.421Z,1509053596.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:16.785Z,1509053596.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:16.821Z,1509053596.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:17.199Z,1509053597.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:17.215Z,1509053597.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:17.591Z,1509053597.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:17.612Z,1509053597.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:17.993Z,1509053597.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:18.016Z,1509053598.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:18.384Z,1509053598.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:18.420Z,1509053598.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:18.788Z,1509053598.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:18.812Z,1509053598.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:19.192Z,1509053599.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:19.231Z,1509053599.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:19.606Z,1509053599.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:19.648Z,1509053599.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:19.987Z,1509053599.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:20.014Z,1509053600.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:20.387Z,1509053600.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:20.415Z,1509053600.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:20.913Z,1509053600.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:21.007Z,1509053601.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:21.296Z,1509053601.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:21.332Z,1509053601.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:21.694Z,1509053601.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:21.710Z,1509053601.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:22.116Z,1509053602.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:22.179Z,1509053602.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:22.522Z,1509053602.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:22.544Z,1509053602.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:22.947Z,1509053602.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:23.015Z,1509053603.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:23.311Z,1509053603.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:23.344Z,1509053603.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:23.694Z,1509053603.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:23.733Z,1509053603.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:24.105Z,1509053604.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:24.173Z,1509053604.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:24.506Z,1509053604.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:24.543Z,1509053604.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:24.972Z,1509053604.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:25.000Z,1509053605.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:25.292Z,1509053605.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:25.407Z,1509053605.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:25.700Z,1509053605.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:25.742Z,1509053605.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:26.101Z,1509053606.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:26.192Z,1509053606.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:26.507Z,1509053606.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:26.529Z,1509053606.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:26.908Z,1509053606.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:27.012Z,1509053607.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:27.303Z,1509053607.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:27.363Z,1509053607.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:27.723Z,1509053607.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:27.762Z,1509053607.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:28.106Z,1509053608.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:28.130Z,1509053608.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:28.491Z,1509053608.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:28.528Z,1509053608.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:28.925Z,1509053608.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:29.009Z,1509053609.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:29.299Z,1509053609.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:29.315Z,1509053609.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:29.701Z,1509053609.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:29.724Z,1509053609.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:30.096Z,1509053610.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:30.125Z,1509053610.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:30.501Z,1509053610.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:30.524Z,1509053610.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:30.915Z,1509053610.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:31.004Z,1509053611.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:31.295Z,1509053611.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:31.312Z,1509053611.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:31.705Z,1509053611.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:31.722Z,1509053611.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:32.107Z,1509053612.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:32.123Z,1509053612.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:32.501Z,1509053612.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:32.535Z,1509053612.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:32.898Z,1509053612.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:32.942Z,1509053612.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:33.303Z,1509053613.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:33.352Z,1509053613.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:33.697Z,1509053613.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:33.734Z,1509053613.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:34.096Z,1509053614.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:34.112Z,1509053614.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:34.503Z,1509053614.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:34.520Z,1509053614.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:34.905Z,1509053614.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:34.921Z,1509053614.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:35.296Z,1509053615.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:35.337Z,1509053615.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:35.695Z,1509053615.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:35.727Z,1509053615.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:36.095Z,1509053616.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:36.146Z,1509053616.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:36.509Z,1509053616.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:36.544Z,1509053616.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:36.921Z,1509053616.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:37.003Z,1509053617.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:37.297Z,1509053617.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:37.333Z,1509053617.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:37.710Z,1509053617.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:37.734Z,1509053617.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:38.099Z,1509053618.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:38.165Z,1509053618.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:38.497Z,1509053618.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:38.525Z,1509053618.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:38.984Z,1509053618.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:39.046Z,1509053619.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:39.305Z,1509053619.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:39.351Z,1509053619.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:39.705Z,1509053619.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:39.790Z,1509053619.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:40.110Z,1509053620.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:40.126Z,1509053620.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:40.506Z,1509053620.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:40.527Z,1509053620.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:40.918Z,1509053620.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:41.032Z,1509053621.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:41.305Z,1509053621.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:41.342Z,1509053621.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:41.704Z,1509053621.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:41.759Z,1509053621.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:42.117Z,1509053622.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:42.189Z,1509053622.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:42.512Z,1509053622.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:42.534Z,1509053622.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:42.982Z,1509053622.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:43.061Z,1509053623.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:43.305Z,1509053623.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:43.341Z,1509053623.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:43.703Z,1509053623.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:43.732Z,1509053623.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:44.111Z,1509053624.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:44.177Z,1509053624.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:44.511Z,1509053624.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:44.562Z,1509053624.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:44.910Z,1509053624.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:44.926Z,1509053624.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:45.299Z,1509053625.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:45.332Z,1509053625.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:45.695Z,1509053625.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:45.718Z,1509053625.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:46.108Z,1509053626.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:46.143Z,1509053626.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:46.513Z,1509053626.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:46.529Z,1509053626.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:46.907Z,1509053626.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:46.923Z,1509053626.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:47.299Z,1509053627.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:47.336Z,1509053627.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:47.708Z,1509053627.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:47.744Z,1509053627.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:48.110Z,1509053628.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:48.167Z,1509053628.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:48.505Z,1509053628.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:48.527Z,1509053628.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:48.908Z,1509053628.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:48.987Z,1509053628.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:49.304Z,1509053629.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:49.328Z,1509053629.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:49.707Z,1509053629.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:49.735Z,1509053629.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:50.109Z,1509053630.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:50.180Z,1509053630.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:50.514Z,1509053630.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:50.530Z,1509053630.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:50.893Z,1509053630.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:50.925Z,1509053630.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:51.304Z,1509053631.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:51.336Z,1509053631.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:51.695Z,1509053631.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:51.712Z,1509053631.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:52.110Z,1509053632.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:52.152Z,1509053632.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:52.513Z,1509053632.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:52.531Z,1509053632.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:52.897Z,1509053632.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:52.925Z,1509053632.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:53.303Z,1509053633.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:53.339Z,1509053633.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:53.706Z,1509053633.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:53.728Z,1509053633.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:54.104Z,1509053634.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:54.190Z,1509053634.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:54.490Z,1509053634.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:54.576Z,1509053634.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:54.899Z,1509053634.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:54.935Z,1509053634.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:55.345Z,1509053635.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:55.390Z,1509053635.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:55.748Z,1509053635.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:55.811Z,1509053635.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:56.112Z,1509053636.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:56.187Z,1509053636.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:56.509Z,1509053636.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:56.562Z,1509053636.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:56.914Z,1509053636.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:56.979Z,1509053636.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:57.316Z,1509053637.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:57.332Z,1509053637.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:57.723Z,1509053637.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:57.740Z,1509053637.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:58.104Z,1509053638.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:58.173Z,1509053638.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:58.501Z,1509053638.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:58.517Z,1509053638.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:58.917Z,1509053638.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:58.959Z,1509053638.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:59.316Z,1509053639.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:59.332Z,1509053639.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:33:59.751Z,1509053639.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:33:59.782Z,1509053639.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:00.104Z,1509053640.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:00.120Z,1509053640.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:00.519Z,1509053640.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:00.536Z,1509053640.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:00.895Z,1509053640.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:00.998Z,1509053640.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:01.322Z,1509053641.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:01.384Z,1509053641.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:01.703Z,1509053641.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:01.732Z,1509053641.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:02.098Z,1509053642.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:02.131Z,1509053642.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:02.517Z,1509053642.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:02.533Z,1509053642.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:02.909Z,1509053642.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:03.009Z,1509053643.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:03.328Z,1509053643.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:03.379Z,1509053643.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:03.709Z,1509053643.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:03.730Z,1509053643.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:04.095Z,1509053644.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:04.127Z,1509053644.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:04.498Z,1509053644.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:04.528Z,1509053644.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:04.936Z,1509053644.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:05.007Z,1509053645.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:05.304Z,1509053645.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:05.360Z,1509053645.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:05.708Z,1509053645.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:05.741Z,1509053645.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:06.109Z,1509053646.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:06.125Z,1509053646.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:06.515Z,1509053646.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:06.531Z,1509053646.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:06.931Z,1509053646.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:07.025Z,1509053647.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:07.295Z,1509053647.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:07.312Z,1509053647.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:07.705Z,1509053647.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:07.750Z,1509053647.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:08.113Z,1509053648.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:08.172Z,1509053648.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:08.513Z,1509053648.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:08.530Z,1509053648.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:08.937Z,1509053648.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:09.053Z,1509053649.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:09.307Z,1509053649.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:09.332Z,1509053649.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:09.705Z,1509053649.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:09.777Z,1509053649.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:10.102Z,1509053650.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:10.165Z,1509053650.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:10.500Z,1509053650.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:10.553Z,1509053650.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:10.938Z,1509053650.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:11.003Z,1509053651.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:11.288Z,1509053651.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:11.306Z,1509053651.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:11.702Z,1509053651.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:11.731Z,1509053651.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:12.104Z,1509053652.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:12.124Z,1509053652.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:12.526Z,1509053652.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:12.584Z,1509053652.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:12.884Z,1509053652.884 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:34:12.965Z,1509053652.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:13.006Z,1509053653.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:13.314Z,1509053653.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:13.347Z,1509053653.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:13.699Z,1509053653.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:13.753Z,1509053653.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:14.106Z,1509053654.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:14.177Z,1509053654.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:14.511Z,1509053654.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:14.545Z,1509053654.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:14.906Z,1509053654.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:14.983Z,1509053654.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:15.311Z,1509053655.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:15.327Z,1509053655.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:15.717Z,1509053655.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:15.734Z,1509053655.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:16.121Z,1509053656.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:16.176Z,1509053656.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:16.492Z,1509053656.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:16.605Z,1509053656.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:16.899Z,1509053656.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:16.971Z,1509053656.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:17.312Z,1509053657.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:17.348Z,1509053657.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:17.719Z,1509053657.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:17.744Z,1509053657.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:18.120Z,1509053658.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:18.173Z,1509053658.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:18.493Z,1509053658.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:18.526Z,1509053658.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:18.904Z,1509053658.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:18.996Z,1509053658.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:19.308Z,1509053659.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:19.343Z,1509053659.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:19.700Z,1509053659.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:19.716Z,1509053659.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:20.110Z,1509053660.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:20.159Z,1509053660.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:20.514Z,1509053660.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:20.531Z,1509053660.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:20.913Z,1509053660.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:20.972Z,1509053660.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:21.301Z,1509053661.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:21.337Z,1509053661.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:21.359Z,1509053661.359 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T21:34:21.701Z,1509053661.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:21.726Z,1509053661.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:22.102Z,1509053662.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:22.119Z,1509053662.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:22.506Z,1509053662.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:22.528Z,1509053662.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:22.911Z,1509053662.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:23.053Z,1509053663.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:23.299Z,1509053663.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:23.324Z,1509053663.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:23.716Z,1509053663.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:23.780Z,1509053663.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:24.106Z,1509053664.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:24.138Z,1509053664.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:24.488Z,1509053664.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:24.544Z,1509053664.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:24.897Z,1509053664.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:24.965Z,1509053664.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:25.323Z,1509053665.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:25.380Z,1509053665.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:25.699Z,1509053665.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:25.752Z,1509053665.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:26.108Z,1509053666.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:26.186Z,1509053666.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:26.495Z,1509053666.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:26.513Z,1509053666.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:26.900Z,1509053666.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:26.916Z,1509053666.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:27.300Z,1509053667.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:27.328Z,1509053667.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:27.708Z,1509053667.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:27.726Z,1509053667.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:28.113Z,1509053668.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:28.148Z,1509053668.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:28.512Z,1509053668.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:28.528Z,1509053668.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:28.907Z,1509053668.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:28.935Z,1509053668.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:29.320Z,1509053669.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:29.371Z,1509053669.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:29.692Z,1509053669.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:29.772Z,1509053669.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:30.097Z,1509053670.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:30.113Z,1509053670.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:30.505Z,1509053670.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:30.521Z,1509053670.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:30.906Z,1509053670.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:31.017Z,1509053671.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:31.307Z,1509053671.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:31.323Z,1509053671.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:31.699Z,1509053671.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:31.727Z,1509053671.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:32.090Z,1509053672.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:32.130Z,1509053672.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:32.509Z,1509053672.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:32.525Z,1509053672.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:32.916Z,1509053672.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:33.030Z,1509053673.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:33.294Z,1509053673.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:33.332Z,1509053673.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:33.700Z,1509053673.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:33.725Z,1509053673.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:34.112Z,1509053674.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:34.134Z,1509053674.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:34.492Z,1509053674.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:34.508Z,1509053674.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:34.954Z,1509053674.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:35.040Z,1509053675.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:35.297Z,1509053675.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:35.329Z,1509053675.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:35.704Z,1509053675.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:35.721Z,1509053675.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:36.104Z,1509053676.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:36.119Z,1509053676.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:36.493Z,1509053676.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:36.526Z,1509053676.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:36.932Z,1509053676.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:37.063Z,1509053677.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:37.294Z,1509053677.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:37.328Z,1509053677.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:37.708Z,1509053677.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:37.762Z,1509053677.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:38.104Z,1509053678.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:38.120Z,1509053678.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:38.514Z,1509053678.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:38.577Z,1509053678.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:38.924Z,1509053678.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:39.021Z,1509053679.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:39.301Z,1509053679.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:39.317Z,1509053679.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:39.699Z,1509053679.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:39.732Z,1509053679.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:40.103Z,1509053680.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:40.124Z,1509053680.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:40.506Z,1509053680.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:40.522Z,1509053680.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:40.937Z,1509053680.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:41.007Z,1509053681.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:41.302Z,1509053681.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:41.345Z,1509053681.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:41.701Z,1509053681.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:41.736Z,1509053681.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:42.108Z,1509053682.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:42.162Z,1509053682.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:42.502Z,1509053682.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:42.518Z,1509053682.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:42.928Z,1509053682.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:43.014Z,1509053683.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:43.303Z,1509053683.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:43.319Z,1509053683.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:43.702Z,1509053683.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:43.730Z,1509053683.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:44.113Z,1509053684.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:44.134Z,1509053684.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:44.495Z,1509053684.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:44.525Z,1509053684.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:44.921Z,1509053684.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:44.983Z,1509053684.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:45.311Z,1509053685.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:45.340Z,1509053685.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:45.693Z,1509053685.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:45.723Z,1509053685.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:46.101Z,1509053686.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:46.224Z,1509053686.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:46.505Z,1509053686.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:46.537Z,1509053686.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:46.967Z,1509053686.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:47.002Z,1509053687.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:47.298Z,1509053687.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:47.328Z,1509053687.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:47.703Z,1509053687.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:47.740Z,1509053687.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:48.101Z,1509053688.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:48.123Z,1509053688.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:48.506Z,1509053688.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:48.523Z,1509053688.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:48.892Z,1509053688.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:48.920Z,1509053688.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:49.308Z,1509053689.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:49.331Z,1509053689.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:49.698Z,1509053689.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:49.719Z,1509053689.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:50.111Z,1509053690.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:50.131Z,1509053690.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:50.499Z,1509053690.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:50.533Z,1509053690.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:50.956Z,1509053690.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:51.063Z,1509053691.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:51.299Z,1509053691.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:51.326Z,1509053691.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:51.701Z,1509053691.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:51.729Z,1509053691.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:52.096Z,1509053692.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:52.188Z,1509053692.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:52.505Z,1509053692.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:52.523Z,1509053692.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:52.953Z,1509053692.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:53.005Z,1509053693.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:53.291Z,1509053693.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:53.337Z,1509053693.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:53.693Z,1509053693.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:53.722Z,1509053693.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:54.092Z,1509053694.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:54.100Z,1509053694.100 [BPC1](ERROR): Failed to receive battery data
2017-10-26T21:34:54.100Z,1509053694.100 [BPC1] Communications Fault, FailCount= 1
2017-10-26T21:34:54.100Z,1509053694.100 [BPC1](ERROR): Communications Fault
2017-10-26T21:34:54.175Z,1509053694.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:54.276Z,1509053694.276 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T21:34:54.505Z,1509053694.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:54.521Z,1509053694.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:54.933Z,1509053694.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:54.994Z,1509053694.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:55.298Z,1509053695.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:55.333Z,1509053695.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:55.422Z,1509053695.422 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:34:55.422Z,1509053695.422 [BPC1] No Fault, FailCount= 1
2017-10-26T21:34:55.699Z,1509053695.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:55.788Z,1509053695.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:56.096Z,1509053696.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:56.170Z,1509053696.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:56.503Z,1509053696.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:56.519Z,1509053696.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:56.933Z,1509053696.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:56.985Z,1509053696.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:57.310Z,1509053697.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:57.326Z,1509053697.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:57.720Z,1509053697.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:57.737Z,1509053697.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:58.092Z,1509053698.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:58.125Z,1509053698.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:58.537Z,1509053698.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:58.598Z,1509053698.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:58.930Z,1509053698.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:58.997Z,1509053698.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:59.303Z,1509053699.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:59.346Z,1509053699.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:34:59.697Z,1509053699.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:34:59.730Z,1509053699.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:00.104Z,1509053700.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:00.178Z,1509053700.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:00.494Z,1509053700.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:00.532Z,1509053700.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:00.931Z,1509053700.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:00.997Z,1509053700.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:01.303Z,1509053701.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:01.347Z,1509053701.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:01.699Z,1509053701.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:01.715Z,1509053701.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:02.099Z,1509053702.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:02.115Z,1509053702.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:02.509Z,1509053702.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:02.529Z,1509053702.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:02.917Z,1509053702.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:03.022Z,1509053703.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:03.300Z,1509053703.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:03.323Z,1509053703.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:03.703Z,1509053703.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:03.720Z,1509053703.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:04.095Z,1509053704.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:04.120Z,1509053704.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:04.500Z,1509053704.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:04.543Z,1509053704.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:04.931Z,1509053704.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:05.009Z,1509053705.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:05.301Z,1509053705.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:05.317Z,1509053705.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:05.707Z,1509053705.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:05.737Z,1509053705.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:06.101Z,1509053706.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:06.117Z,1509053706.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:06.491Z,1509053706.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:06.528Z,1509053706.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:06.945Z,1509053706.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:07.035Z,1509053707.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:07.293Z,1509053707.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:07.338Z,1509053707.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:07.705Z,1509053707.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:07.743Z,1509053707.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:08.095Z,1509053708.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:08.123Z,1509053708.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:08.510Z,1509053708.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:08.529Z,1509053708.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:08.903Z,1509053708.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:09.002Z,1509053709.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:09.292Z,1509053709.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:09.326Z,1509053709.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:09.707Z,1509053709.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:09.732Z,1509053709.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:10.119Z,1509053710.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:10.177Z,1509053710.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:10.501Z,1509053710.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:10.558Z,1509053710.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:10.923Z,1509053710.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:11.016Z,1509053711.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:11.305Z,1509053711.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:11.326Z,1509053711.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:11.709Z,1509053711.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:11.726Z,1509053711.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:12.101Z,1509053712.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:12.117Z,1509053712.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:12.508Z,1509053712.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:12.589Z,1509053712.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:12.914Z,1509053712.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:12.994Z,1509053712.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:13.299Z,1509053713.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:13.349Z,1509053713.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:13.678Z,1509053713.678 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:35:13.710Z,1509053713.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:13.772Z,1509053713.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:14.108Z,1509053714.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:14.124Z,1509053714.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:14.506Z,1509053714.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:14.537Z,1509053714.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:14.951Z,1509053714.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:15.011Z,1509053715.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:15.301Z,1509053715.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:15.342Z,1509053715.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:15.701Z,1509053715.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:15.744Z,1509053715.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:16.101Z,1509053716.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:16.117Z,1509053716.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:16.512Z,1509053716.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:16.528Z,1509053716.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:16.926Z,1509053716.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:16.993Z,1509053716.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:17.291Z,1509053717.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:17.337Z,1509053717.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:17.705Z,1509053717.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:17.734Z,1509053717.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:18.106Z,1509053718.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:18.180Z,1509053718.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:18.496Z,1509053718.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:18.513Z,1509053718.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:18.971Z,1509053718.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:19.012Z,1509053719.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:19.305Z,1509053719.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:19.322Z,1509053719.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:19.715Z,1509053719.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:19.736Z,1509053719.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:20.099Z,1509053720.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:20.199Z,1509053720.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:20.497Z,1509053720.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:20.538Z,1509053720.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:20.910Z,1509053720.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:21.005Z,1509053721.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:21.296Z,1509053721.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:21.312Z,1509053721.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:21.711Z,1509053721.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:21.779Z,1509053721.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:22.107Z,1509053722.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:22.124Z,1509053722.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:22.520Z,1509053722.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:22.537Z,1509053722.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:22.943Z,1509053722.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:23.031Z,1509053723.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:23.298Z,1509053723.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:23.352Z,1509053723.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:23.703Z,1509053723.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:23.725Z,1509053723.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:24.110Z,1509053724.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:24.130Z,1509053724.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:24.494Z,1509053724.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:24.592Z,1509053724.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:24.950Z,1509053724.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:25.016Z,1509053725.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:25.309Z,1509053725.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:25.354Z,1509053725.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:25.693Z,1509053725.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:25.772Z,1509053725.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:26.095Z,1509053726.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:26.115Z,1509053726.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:26.500Z,1509053726.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:26.547Z,1509053726.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:26.926Z,1509053726.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:27.022Z,1509053727.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:27.304Z,1509053727.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:27.373Z,1509053727.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:27.692Z,1509053727.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:27.742Z,1509053727.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:28.093Z,1509053728.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:28.170Z,1509053728.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:28.498Z,1509053728.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:28.523Z,1509053728.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:28.950Z,1509053728.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:28.970Z,1509053728.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:29.304Z,1509053729.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:29.336Z,1509053729.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:29.696Z,1509053729.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:29.734Z,1509053729.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:30.097Z,1509053730.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:30.129Z,1509053730.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:30.493Z,1509053730.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:30.530Z,1509053730.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:30.974Z,1509053730.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:31.016Z,1509053731.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:31.301Z,1509053731.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:31.328Z,1509053731.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:31.707Z,1509053731.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:31.724Z,1509053731.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:32.102Z,1509053732.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:32.126Z,1509053732.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:32.503Z,1509053732.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:32.521Z,1509053732.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:32.911Z,1509053732.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:32.990Z,1509053732.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:33.299Z,1509053733.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:33.334Z,1509053733.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:33.706Z,1509053733.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:33.742Z,1509053733.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:34.101Z,1509053734.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:34.118Z,1509053734.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:34.497Z,1509053734.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:34.513Z,1509053734.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:34.946Z,1509053734.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:35.035Z,1509053735.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:35.303Z,1509053735.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:35.320Z,1509053735.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:35.710Z,1509053735.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:35.726Z,1509053735.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:36.114Z,1509053736.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:36.179Z,1509053736.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:36.508Z,1509053736.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:36.525Z,1509053736.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:36.942Z,1509053736.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:37.025Z,1509053737.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:37.295Z,1509053737.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:37.334Z,1509053737.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:37.700Z,1509053737.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:37.738Z,1509053737.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:38.105Z,1509053738.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:38.148Z,1509053738.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:38.503Z,1509053738.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:38.558Z,1509053738.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:38.950Z,1509053738.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:39.002Z,1509053739.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:39.296Z,1509053739.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:39.312Z,1509053739.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:39.704Z,1509053739.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:39.756Z,1509053739.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:40.111Z,1509053740.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:40.212Z,1509053740.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:40.496Z,1509053740.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:40.548Z,1509053740.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:40.948Z,1509053740.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:41.019Z,1509053741.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:41.309Z,1509053741.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:41.387Z,1509053741.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:41.709Z,1509053741.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:41.725Z,1509053741.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:42.095Z,1509053742.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:42.182Z,1509053742.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:42.501Z,1509053742.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:42.581Z,1509053742.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:42.916Z,1509053742.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:43.004Z,1509053743.004 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:43.004Z,1509053743.004 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 36
2017-10-26T21:35:43.005Z,1509053743.005 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:35:43.025Z,1509053743.025 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:43.025Z,1509053743.025 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 36
2017-10-26T21:35:43.025Z,1509053743.025 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:35:43.138Z,1509053743.138 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:35:43.141Z,1509053743.141 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:35:43.304Z,1509053743.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:43.392Z,1509053743.392 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:35:43.392Z,1509053743.392 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 36
2017-10-26T21:35:43.393Z,1509053743.393 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:35:43.393Z,1509053743.393 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 36
2017-10-26T21:35:43.703Z,1509053743.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:43.718Z,1509053743.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:35:43.718Z,1509053743.718 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:35:43.719Z,1509053743.719 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:35:43.721Z,1509053743.721 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:35:43.722Z,1509053743.722 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:35:43.722Z,1509053743.722 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:35:44.114Z,1509053744.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:44.174Z,1509053744.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:44.490Z,1509053744.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:44.525Z,1509053744.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:44.916Z,1509053744.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:44.994Z,1509053744.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:45.299Z,1509053745.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:45.323Z,1509053745.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:45.698Z,1509053745.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:45.714Z,1509053745.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:46.105Z,1509053746.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:46.121Z,1509053746.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:46.509Z,1509053746.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:46.526Z,1509053746.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:46.909Z,1509053746.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:47.000Z,1509053747.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:47.302Z,1509053747.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:47.340Z,1509053747.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:47.697Z,1509053747.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:47.713Z,1509053747.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:48.094Z,1509053748.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:48.110Z,1509053748.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:48.494Z,1509053748.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:48.526Z,1509053748.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:48.912Z,1509053748.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:48.995Z,1509053748.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:49.290Z,1509053749.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:49.329Z,1509053749.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:49.703Z,1509053749.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:49.729Z,1509053749.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:50.107Z,1509053750.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:50.162Z,1509053750.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:50.496Z,1509053750.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:50.517Z,1509053750.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:51.048Z,1509053751.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:51.064Z,1509053751.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:51.446Z,1509053751.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:51.462Z,1509053751.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:51.842Z,1509053751.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:51.871Z,1509053751.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:52.253Z,1509053752.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:52.275Z,1509053752.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:52.650Z,1509053752.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:52.660Z,1509053752.660 [BPC1](ERROR): Failed to parse message.
2017-10-26T21:35:52.660Z,1509053752.660 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T21:35:52.660Z,1509053752.660 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:35:52.660Z,1509053752.660 [BPC1](ERROR): Data Fault
2017-10-26T21:35:52.669Z,1509053752.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:52.878Z,1509053752.878 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:35:53.051Z,1509053753.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:53.089Z,1509053753.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:53.460Z,1509053753.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:53.481Z,1509053753.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:53.835Z,1509053753.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:53.867Z,1509053753.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:53.980Z,1509053753.980 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:35:53.981Z,1509053753.981 [BPC1] No Fault, FailCount= 1
2017-10-26T21:35:54.241Z,1509053754.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:54.339Z,1509053754.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:54.642Z,1509053754.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:54.680Z,1509053754.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:55.037Z,1509053755.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:55.091Z,1509053755.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:55.434Z,1509053755.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:55.480Z,1509053755.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:55.840Z,1509053755.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:55.868Z,1509053755.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:56.233Z,1509053756.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:56.275Z,1509053756.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:56.641Z,1509053756.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:56.677Z,1509053756.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:57.038Z,1509053757.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:57.055Z,1509053757.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:57.443Z,1509053757.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:57.479Z,1509053757.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:57.849Z,1509053757.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:57.865Z,1509053757.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:58.241Z,1509053758.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:58.285Z,1509053758.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:58.638Z,1509053758.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:58.668Z,1509053758.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:59.033Z,1509053759.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:59.074Z,1509053759.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:59.446Z,1509053759.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:59.474Z,1509053759.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:35:59.836Z,1509053759.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:35:59.853Z,1509053759.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:00.238Z,1509053760.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:00.259Z,1509053760.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:00.642Z,1509053760.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:00.665Z,1509053760.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:01.041Z,1509053761.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:01.061Z,1509053761.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:01.450Z,1509053761.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:01.476Z,1509053761.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:01.843Z,1509053761.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:01.860Z,1509053761.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:02.240Z,1509053762.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:02.256Z,1509053762.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:02.646Z,1509053762.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:02.662Z,1509053762.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:03.042Z,1509053763.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:03.113Z,1509053763.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:03.436Z,1509053763.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:03.482Z,1509053763.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:03.841Z,1509053763.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:03.874Z,1509053763.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:04.241Z,1509053764.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:04.274Z,1509053764.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:04.640Z,1509053764.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:04.672Z,1509053764.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:05.044Z,1509053765.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:05.095Z,1509053765.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:05.436Z,1509053765.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:05.464Z,1509053765.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:05.841Z,1509053765.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:05.904Z,1509053765.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:06.246Z,1509053766.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:06.263Z,1509053766.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:06.638Z,1509053766.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:06.670Z,1509053766.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:07.040Z,1509053767.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:07.069Z,1509053767.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:07.430Z,1509053767.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:07.498Z,1509053767.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:07.833Z,1509053767.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:07.869Z,1509053767.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:08.235Z,1509053768.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:08.284Z,1509053768.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:08.644Z,1509053768.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:08.685Z,1509053768.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:09.044Z,1509053769.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:09.098Z,1509053769.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:09.429Z,1509053769.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:09.466Z,1509053769.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:09.832Z,1509053769.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:09.888Z,1509053769.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:10.234Z,1509053770.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:10.266Z,1509053770.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:10.643Z,1509053770.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:10.671Z,1509053770.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:11.096Z,1509053771.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:11.159Z,1509053771.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:11.441Z,1509053771.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:11.474Z,1509053771.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:11.846Z,1509053771.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:11.879Z,1509053771.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:12.239Z,1509053772.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:12.272Z,1509053772.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:12.649Z,1509053772.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:12.670Z,1509053772.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:13.047Z,1509053773.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:13.066Z,1509053773.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:13.418Z,1509053773.418 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:36:13.456Z,1509053773.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:13.514Z,1509053773.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:13.840Z,1509053773.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:13.861Z,1509053773.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:14.246Z,1509053774.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:14.262Z,1509053774.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:14.649Z,1509053774.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:14.698Z,1509053774.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:15.033Z,1509053775.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:15.062Z,1509053775.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:15.440Z,1509053775.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:15.473Z,1509053775.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:15.837Z,1509053775.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:15.868Z,1509053775.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:16.244Z,1509053776.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:16.271Z,1509053776.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:16.645Z,1509053776.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:16.688Z,1509053776.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:17.044Z,1509053777.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:17.061Z,1509053777.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:17.441Z,1509053777.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:17.458Z,1509053777.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:17.845Z,1509053777.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:17.869Z,1509053777.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:18.237Z,1509053778.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:18.273Z,1509053778.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:18.632Z,1509053778.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:18.669Z,1509053778.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:19.034Z,1509053779.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:19.080Z,1509053779.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:19.442Z,1509053779.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:19.471Z,1509053779.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:19.844Z,1509053779.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:19.860Z,1509053779.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:20.233Z,1509053780.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:20.287Z,1509053780.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:20.630Z,1509053780.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:20.666Z,1509053780.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:21.045Z,1509053781.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:21.075Z,1509053781.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:21.435Z,1509053781.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:21.465Z,1509053781.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:21.839Z,1509053781.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:21.898Z,1509053781.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:22.241Z,1509053782.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:22.285Z,1509053782.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:22.643Z,1509053782.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:22.676Z,1509053782.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:23.037Z,1509053783.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:23.099Z,1509053783.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:23.446Z,1509053783.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:23.470Z,1509053783.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:23.839Z,1509053783.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:23.899Z,1509053783.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:24.240Z,1509053784.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:24.296Z,1509053784.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:24.643Z,1509053784.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:24.659Z,1509053784.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:25.088Z,1509053785.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:25.144Z,1509053785.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:25.436Z,1509053785.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:25.453Z,1509053785.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:25.843Z,1509053785.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:25.903Z,1509053785.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:26.246Z,1509053786.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:26.264Z,1509053786.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:26.647Z,1509053786.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:26.663Z,1509053786.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:27.039Z,1509053787.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:27.068Z,1509053787.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:27.462Z,1509053787.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:27.478Z,1509053787.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:27.834Z,1509053787.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:27.862Z,1509053787.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:28.242Z,1509053788.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:28.258Z,1509053788.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:28.638Z,1509053788.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:28.654Z,1509053788.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:29.055Z,1509053789.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:29.072Z,1509053789.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:29.443Z,1509053789.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:29.469Z,1509053789.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:29.846Z,1509053789.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:29.862Z,1509053789.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:30.234Z,1509053790.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:30.269Z,1509053790.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:30.634Z,1509053790.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:30.663Z,1509053790.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:31.038Z,1509053791.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:31.077Z,1509053791.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:31.435Z,1509053791.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:31.472Z,1509053791.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:31.990Z,1509053791.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:32.033Z,1509053792.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:32.394Z,1509053792.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:32.431Z,1509053792.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:32.790Z,1509053792.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:32.827Z,1509053792.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:33.202Z,1509053793.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:33.240Z,1509053793.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:33.599Z,1509053793.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:33.640Z,1509053793.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:33.000Z,1509053794.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:34.021Z,1509053794.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:34.392Z,1509053794.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:34.414Z,1509053794.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:34.801Z,1509053794.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:34.854Z,1509053794.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:35.218Z,1509053795.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:35.238Z,1509053795.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:35.589Z,1509053795.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:35.622Z,1509053795.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:35.998Z,1509053795.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:36.029Z,1509053796.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:36.399Z,1509053796.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:36.460Z,1509053796.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:36.794Z,1509053796.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:36.810Z,1509053796.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:37.198Z,1509053797.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:37.249Z,1509053797.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:37.600Z,1509053797.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:37.616Z,1509053797.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:38.005Z,1509053798.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:38.063Z,1509053798.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:38.391Z,1509053798.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:38.459Z,1509053798.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:38.802Z,1509053798.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:38.830Z,1509053798.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:39.216Z,1509053799.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:39.232Z,1509053799.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:39.601Z,1509053799.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:39.633Z,1509053799.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:39.998Z,1509053799.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:40.036Z,1509053800.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:40.394Z,1509053800.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:40.426Z,1509053800.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:40.794Z,1509053800.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:40.814Z,1509053800.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:41.206Z,1509053801.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:41.319Z,1509053801.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:41.592Z,1509053801.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:41.637Z,1509053801.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:41.993Z,1509053801.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:42.009Z,1509053802.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:42.393Z,1509053802.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:42.409Z,1509053802.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:42.790Z,1509053802.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:42.812Z,1509053802.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:43.204Z,1509053803.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:43.225Z,1509053803.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:43.635Z,1509053803.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:43.692Z,1509053803.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:43.991Z,1509053803.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:44.028Z,1509053804.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:44.391Z,1509053804.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:44.412Z,1509053804.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:44.801Z,1509053804.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:44.842Z,1509053804.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:45.299Z,1509053805.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:45.330Z,1509053805.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:45.694Z,1509053805.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:45.731Z,1509053805.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:46.094Z,1509053806.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:46.123Z,1509053806.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:46.495Z,1509053806.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:46.532Z,1509053806.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:46.904Z,1509053806.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:46.952Z,1509053806.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:47.290Z,1509053807.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:47.333Z,1509053807.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:47.701Z,1509053807.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:47.733Z,1509053807.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:48.102Z,1509053808.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:48.179Z,1509053808.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:48.492Z,1509053808.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:48.527Z,1509053808.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:48.903Z,1509053808.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:48.919Z,1509053808.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:49.300Z,1509053809.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:49.346Z,1509053809.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:49.696Z,1509053809.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:49.737Z,1509053809.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:50.102Z,1509053810.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:50.169Z,1509053810.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:50.510Z,1509053810.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:50.572Z,1509053810.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:50.889Z,1509053810.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:50.917Z,1509053810.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:51.299Z,1509053811.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:51.329Z,1509053811.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:51.706Z,1509053811.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:51.761Z,1509053811.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:52.103Z,1509053812.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:52.120Z,1509053812.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:52.488Z,1509053812.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:52.553Z,1509053812.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:52.905Z,1509053812.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:52.972Z,1509053812.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:53.298Z,1509053813.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:53.350Z,1509053813.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:53.701Z,1509053813.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:53.718Z,1509053813.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:54.100Z,1509053814.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:54.117Z,1509053814.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:54.506Z,1509053814.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:54.523Z,1509053814.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:54.899Z,1509053814.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:54.915Z,1509053814.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:55.322Z,1509053815.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:55.405Z,1509053815.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:55.691Z,1509053815.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:55.724Z,1509053815.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:56.093Z,1509053816.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:56.128Z,1509053816.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:56.502Z,1509053816.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:56.519Z,1509053816.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:56.903Z,1509053816.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:56.920Z,1509053816.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:57.291Z,1509053817.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:57.321Z,1509053817.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:57.701Z,1509053817.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:57.747Z,1509053817.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:58.090Z,1509053818.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:58.128Z,1509053818.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:58.501Z,1509053818.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:58.517Z,1509053818.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:58.904Z,1509053818.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:58.920Z,1509053818.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:59.290Z,1509053819.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:59.331Z,1509053819.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:36:59.694Z,1509053819.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:36:59.734Z,1509053819.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:00.094Z,1509053820.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:00.110Z,1509053820.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:00.499Z,1509053820.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:00.528Z,1509053820.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:00.901Z,1509053820.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:00.957Z,1509053820.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:01.294Z,1509053821.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:01.321Z,1509053821.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:01.692Z,1509053821.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:01.732Z,1509053821.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:02.099Z,1509053822.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:02.116Z,1509053822.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:02.506Z,1509053822.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:02.527Z,1509053822.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:02.909Z,1509053822.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:03.001Z,1509053823.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:03.301Z,1509053823.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:03.333Z,1509053823.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:03.700Z,1509053823.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:03.729Z,1509053823.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:04.107Z,1509053824.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:04.192Z,1509053824.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:04.497Z,1509053824.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:04.523Z,1509053824.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:04.906Z,1509053824.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:05.056Z,1509053825.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:05.291Z,1509053825.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:05.322Z,1509053825.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:05.701Z,1509053825.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:05.775Z,1509053825.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:06.100Z,1509053826.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:06.116Z,1509053826.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:06.504Z,1509053826.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:06.573Z,1509053826.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:06.892Z,1509053826.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:07.022Z,1509053827.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:07.292Z,1509053827.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:07.308Z,1509053827.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:07.703Z,1509053827.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:07.747Z,1509053827.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:08.099Z,1509053828.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:08.115Z,1509053828.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:08.514Z,1509053828.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:08.531Z,1509053828.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:08.889Z,1509053828.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:08.995Z,1509053828.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:09.307Z,1509053829.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:09.346Z,1509053829.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:09.697Z,1509053829.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:09.722Z,1509053829.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:10.100Z,1509053830.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:10.131Z,1509053830.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:10.500Z,1509053830.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:10.517Z,1509053830.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:10.929Z,1509053830.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:11.002Z,1509053831.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:11.289Z,1509053831.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:11.322Z,1509053831.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:11.703Z,1509053831.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:11.741Z,1509053831.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:12.098Z,1509053832.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:12.114Z,1509053832.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:12.496Z,1509053832.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:12.512Z,1509053832.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:12.903Z,1509053832.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:12.919Z,1509053832.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:13.302Z,1509053833.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:13.328Z,1509053833.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:13.680Z,1509053833.680 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:37:13.709Z,1509053833.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:13.748Z,1509053833.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:14.100Z,1509053834.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:14.169Z,1509053834.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:14.500Z,1509053834.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:14.517Z,1509053834.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:14.909Z,1509053834.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:14.925Z,1509053834.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:15.295Z,1509053835.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:15.321Z,1509053835.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:15.701Z,1509053835.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:15.754Z,1509053835.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:16.116Z,1509053836.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:16.176Z,1509053836.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:16.491Z,1509053836.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:16.520Z,1509053836.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:16.898Z,1509053836.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:16.928Z,1509053836.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:17.302Z,1509053837.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:17.337Z,1509053837.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:17.700Z,1509053837.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:17.772Z,1509053837.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:18.101Z,1509053838.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:18.117Z,1509053838.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:18.501Z,1509053838.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:18.521Z,1509053838.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:18.951Z,1509053838.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:19.043Z,1509053839.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:19.295Z,1509053839.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:19.333Z,1509053839.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:19.703Z,1509053839.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:19.808Z,1509053839.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:20.099Z,1509053840.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:20.115Z,1509053840.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:20.493Z,1509053840.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:20.551Z,1509053840.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:20.948Z,1509053840.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:21.033Z,1509053841.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:21.300Z,1509053841.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:21.316Z,1509053841.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:21.710Z,1509053841.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:21.728Z,1509053841.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:22.096Z,1509053842.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:22.169Z,1509053842.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:22.500Z,1509053842.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:22.531Z,1509053842.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:22.918Z,1509053842.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:22.999Z,1509053842.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:23.292Z,1509053843.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:23.321Z,1509053843.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:23.689Z,1509053843.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:23.713Z,1509053843.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:24.097Z,1509053844.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:24.163Z,1509053844.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:24.496Z,1509053844.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:24.512Z,1509053844.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:24.906Z,1509053844.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:25.010Z,1509053845.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:25.305Z,1509053845.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:25.351Z,1509053845.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:25.705Z,1509053845.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:25.721Z,1509053845.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:26.090Z,1509053846.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:26.132Z,1509053846.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:26.491Z,1509053846.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:26.582Z,1509053846.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:26.905Z,1509053846.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:27.026Z,1509053847.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:27.293Z,1509053847.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:27.322Z,1509053847.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:27.705Z,1509053847.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:27.734Z,1509053847.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:28.096Z,1509053848.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:28.126Z,1509053848.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:28.493Z,1509053848.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:28.526Z,1509053848.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:28.937Z,1509053848.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:29.020Z,1509053849.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:29.304Z,1509053849.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:29.326Z,1509053849.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:29.703Z,1509053849.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:29.720Z,1509053849.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:30.111Z,1509053850.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:30.131Z,1509053850.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:30.495Z,1509053850.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:30.523Z,1509053850.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:30.932Z,1509053850.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:31.011Z,1509053851.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:31.302Z,1509053851.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:31.341Z,1509053851.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:31.706Z,1509053851.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:31.723Z,1509053851.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:32.113Z,1509053852.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:32.189Z,1509053852.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:32.492Z,1509053852.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:32.559Z,1509053852.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:32.891Z,1509053852.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:32.907Z,1509053852.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:33.301Z,1509053853.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:33.344Z,1509053853.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:33.693Z,1509053853.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:33.748Z,1509053853.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:34.093Z,1509053854.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:34.176Z,1509053854.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:34.503Z,1509053854.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:34.559Z,1509053854.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:34.915Z,1509053854.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:35.020Z,1509053855.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:35.300Z,1509053855.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:35.316Z,1509053855.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:35.705Z,1509053855.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:35.722Z,1509053855.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:36.092Z,1509053856.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:36.132Z,1509053856.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:36.490Z,1509053856.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:36.523Z,1509053856.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:36.898Z,1509053856.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:36.914Z,1509053856.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:37.303Z,1509053857.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:37.325Z,1509053857.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:37.690Z,1509053857.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:37.731Z,1509053857.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:38.101Z,1509053858.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:38.117Z,1509053858.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:38.491Z,1509053858.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:38.512Z,1509053858.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:38.906Z,1509053858.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:38.996Z,1509053858.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:39.296Z,1509053859.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:39.318Z,1509053859.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:39.706Z,1509053859.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:39.722Z,1509053859.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:40.092Z,1509053860.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:40.139Z,1509053860.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:40.498Z,1509053860.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:40.514Z,1509053860.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:40.931Z,1509053860.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:41.005Z,1509053861.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:41.292Z,1509053861.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:41.334Z,1509053861.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:41.691Z,1509053861.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:41.708Z,1509053861.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:42.095Z,1509053862.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:42.111Z,1509053862.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:42.501Z,1509053862.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:42.517Z,1509053862.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:42.915Z,1509053862.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:43.009Z,1509053863.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:43.308Z,1509053863.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:43.324Z,1509053863.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:43.688Z,1509053863.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:43.720Z,1509053863.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:44.092Z,1509053864.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:44.120Z,1509053864.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:44.491Z,1509053864.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:44.523Z,1509053864.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:44.929Z,1509053864.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:45.006Z,1509053865.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:45.305Z,1509053865.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:45.321Z,1509053865.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:45.714Z,1509053865.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:45.730Z,1509053865.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:46.099Z,1509053866.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:46.121Z,1509053866.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:46.495Z,1509053866.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:46.524Z,1509053866.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:46.917Z,1509053866.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:47.047Z,1509053867.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:47.309Z,1509053867.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:47.375Z,1509053867.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:47.698Z,1509053867.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:47.729Z,1509053867.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:48.097Z,1509053868.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:48.162Z,1509053868.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:48.499Z,1509053868.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:48.556Z,1509053868.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:48.935Z,1509053868.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:49.003Z,1509053869.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:49.295Z,1509053869.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:49.409Z,1509053869.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:49.717Z,1509053869.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:49.744Z,1509053869.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:50.103Z,1509053870.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:50.194Z,1509053870.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:50.504Z,1509053870.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:50.521Z,1509053870.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:50.924Z,1509053870.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:51.002Z,1509053871.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:51.293Z,1509053871.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:51.340Z,1509053871.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:51.700Z,1509053871.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:51.728Z,1509053871.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:52.106Z,1509053872.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:52.122Z,1509053872.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:52.503Z,1509053872.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:52.536Z,1509053872.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:52.924Z,1509053872.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:53.027Z,1509053873.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:53.301Z,1509053873.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:53.323Z,1509053873.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:53.706Z,1509053873.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:53.723Z,1509053873.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:54.106Z,1509053874.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:54.123Z,1509053874.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:54.492Z,1509053874.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:54.521Z,1509053874.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:54.949Z,1509053874.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:55.012Z,1509053875.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:55.304Z,1509053875.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:55.320Z,1509053875.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:55.701Z,1509053875.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:55.725Z,1509053875.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:56.099Z,1509053876.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:56.128Z,1509053876.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:56.512Z,1509053876.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:56.530Z,1509053876.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:56.896Z,1509053876.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:57.010Z,1509053877.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:57.294Z,1509053877.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:57.311Z,1509053877.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:57.701Z,1509053877.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:57.718Z,1509053877.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:58.100Z,1509053878.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:58.122Z,1509053878.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:58.494Z,1509053878.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:58.546Z,1509053878.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:58.952Z,1509053878.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:58.982Z,1509053878.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:59.294Z,1509053879.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:59.323Z,1509053879.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:37:59.707Z,1509053879.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:37:59.725Z,1509053879.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:00.105Z,1509053880.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:00.123Z,1509053880.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:00.494Z,1509053880.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:00.536Z,1509053880.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:00.914Z,1509053880.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:01.005Z,1509053881.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:01.299Z,1509053881.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:01.335Z,1509053881.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:01.703Z,1509053881.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:01.771Z,1509053881.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:02.101Z,1509053882.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:02.169Z,1509053882.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:02.502Z,1509053882.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:02.518Z,1509053882.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:02.925Z,1509053882.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:03.026Z,1509053883.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:03.294Z,1509053883.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:03.332Z,1509053883.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:03.698Z,1509053883.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:03.746Z,1509053883.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:04.096Z,1509053884.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:04.182Z,1509053884.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:04.504Z,1509053884.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:04.525Z,1509053884.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:05.019Z,1509053885.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:05.062Z,1509053885.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:05.422Z,1509053885.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:05.439Z,1509053885.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:05.827Z,1509053885.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:05.843Z,1509053885.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:06.237Z,1509053886.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:06.253Z,1509053886.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:06.615Z,1509053886.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:06.654Z,1509053886.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:07.014Z,1509053887.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:07.050Z,1509053887.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:07.419Z,1509053887.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:07.444Z,1509053887.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:07.837Z,1509053887.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:07.853Z,1509053887.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:08.248Z,1509053888.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:08.274Z,1509053888.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:08.624Z,1509053888.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:08.640Z,1509053888.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:09.026Z,1509053889.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:09.043Z,1509053889.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:09.429Z,1509053889.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:09.446Z,1509053889.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:09.833Z,1509053889.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:09.884Z,1509053889.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:10.227Z,1509053890.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:10.244Z,1509053890.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:10.622Z,1509053890.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:10.651Z,1509053890.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:11.040Z,1509053891.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:11.083Z,1509053891.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:11.429Z,1509053891.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:11.457Z,1509053891.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:11.834Z,1509053891.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:11.851Z,1509053891.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:12.222Z,1509053892.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:12.241Z,1509053892.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:12.606Z,1509053892.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:12.643Z,1509053892.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:13.041Z,1509053893.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:13.087Z,1509053893.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:13.429Z,1509053893.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:13.450Z,1509053893.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:13.798Z,1509053893.798 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:38:13.821Z,1509053893.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:13.879Z,1509053893.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:14.221Z,1509053894.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:14.250Z,1509053894.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:14.621Z,1509053894.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:14.641Z,1509053894.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:15.033Z,1509053895.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:15.054Z,1509053895.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:15.413Z,1509053895.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:15.450Z,1509053895.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:15.822Z,1509053895.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:15.908Z,1509053895.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:16.222Z,1509053896.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:16.291Z,1509053896.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:16.620Z,1509053896.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:16.649Z,1509053896.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:17.012Z,1509053897.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:17.064Z,1509053897.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:17.526Z,1509053897.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:17.559Z,1509053897.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:17.934Z,1509053897.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:18.004Z,1509053898.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:18.337Z,1509053898.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:18.408Z,1509053898.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:18.734Z,1509053898.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:18.770Z,1509053898.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:19.147Z,1509053899.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:19.183Z,1509053899.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:19.538Z,1509053899.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:19.555Z,1509053899.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:19.945Z,1509053899.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:19.986Z,1509053899.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:20.337Z,1509053900.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:20.354Z,1509053900.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:20.740Z,1509053900.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:20.756Z,1509053900.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:21.143Z,1509053901.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:21.186Z,1509053901.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:21.544Z,1509053901.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:21.561Z,1509053901.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:21.955Z,1509053901.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:21.977Z,1509053901.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:22.336Z,1509053902.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:22.367Z,1509053902.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:22.728Z,1509053902.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:22.776Z,1509053902.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:23.133Z,1509053903.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:23.186Z,1509053903.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:23.537Z,1509053903.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:23.554Z,1509053903.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:23.935Z,1509053903.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:23.951Z,1509053903.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:24.345Z,1509053904.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:24.362Z,1509053904.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:24.743Z,1509053904.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:24.760Z,1509053904.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:25.159Z,1509053905.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:25.185Z,1509053905.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:25.544Z,1509053905.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:25.561Z,1509053905.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:25.925Z,1509053905.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:25.964Z,1509053905.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:26.353Z,1509053906.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:26.370Z,1509053906.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:26.738Z,1509053906.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:26.765Z,1509053906.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:27.132Z,1509053907.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:27.167Z,1509053907.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:27.532Z,1509053907.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:27.548Z,1509053907.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:27.938Z,1509053907.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:27.971Z,1509053907.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:28.335Z,1509053908.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:28.370Z,1509053908.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:28.741Z,1509053908.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:28.768Z,1509053908.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:29.145Z,1509053909.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:29.179Z,1509053909.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:29.539Z,1509053909.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:29.575Z,1509053909.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:29.939Z,1509053909.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:29.992Z,1509053909.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:30.343Z,1509053910.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:30.401Z,1509053910.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:30.734Z,1509053910.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:30.751Z,1509053910.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:31.165Z,1509053911.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:31.239Z,1509053911.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:31.530Z,1509053911.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:31.558Z,1509053911.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:31.940Z,1509053911.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:31.995Z,1509053911.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:32.332Z,1509053912.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:32.395Z,1509053912.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:32.732Z,1509053912.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:32.775Z,1509053912.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:33.168Z,1509053913.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:33.211Z,1509053913.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:33.536Z,1509053913.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:33.553Z,1509053913.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:33.933Z,1509053913.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:33.949Z,1509053913.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:34.341Z,1509053914.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:34.358Z,1509053914.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:34.740Z,1509053914.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:34.757Z,1509053914.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:35.146Z,1509053915.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:35.199Z,1509053915.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:35.532Z,1509053915.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:35.574Z,1509053915.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:35.937Z,1509053915.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:35.965Z,1509053915.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:36.333Z,1509053916.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:36.356Z,1509053916.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:36.726Z,1509053916.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:36.742Z,1509053916.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:37.135Z,1509053917.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:37.201Z,1509053917.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:37.539Z,1509053917.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:37.580Z,1509053917.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:37.932Z,1509053917.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:37.961Z,1509053917.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:38.334Z,1509053918.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:38.376Z,1509053918.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:38.734Z,1509053918.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:38.767Z,1509053918.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:39.132Z,1509053919.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:39.203Z,1509053919.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:39.544Z,1509053919.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:39.568Z,1509053919.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:39.935Z,1509053919.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:39.964Z,1509053919.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:40.336Z,1509053920.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:40.368Z,1509053920.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:40.733Z,1509053920.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:40.769Z,1509053920.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:41.146Z,1509053921.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:41.187Z,1509053921.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:41.542Z,1509053921.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:41.572Z,1509053921.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:41.942Z,1509053921.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:41.958Z,1509053921.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:42.341Z,1509053922.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:42.357Z,1509053922.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:42.740Z,1509053922.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:42.764Z,1509053922.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:43.131Z,1509053923.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:43.178Z,1509053923.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:43.532Z,1509053923.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:43.571Z,1509053923.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:43.937Z,1509053923.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:43.963Z,1509053923.963 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:43.964Z,1509053923.964 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 37
2017-10-26T21:38:43.964Z,1509053923.964 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:38:43.968Z,1509053923.968 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:43.968Z,1509053923.968 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 37
2017-10-26T21:38:43.968Z,1509053923.968 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:38:44.018Z,1509053924.018 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:38:44.018Z,1509053924.018 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:38:44.366Z,1509053924.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:44.485Z,1509053924.485 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:38:44.485Z,1509053924.485 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 37
2017-10-26T21:38:44.486Z,1509053924.486 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:38:44.486Z,1509053924.486 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 37
2017-10-26T21:38:44.739Z,1509053924.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:44.790Z,1509053924.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:38:44.790Z,1509053924.790 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:38:44.791Z,1509053924.791 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:38:44.797Z,1509053924.797 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:38:44.798Z,1509053924.798 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:38:44.798Z,1509053924.798 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:38:45.140Z,1509053925.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:45.184Z,1509053925.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:45.543Z,1509053925.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:45.567Z,1509053925.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:45.945Z,1509053925.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:46.001Z,1509053926.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:46.341Z,1509053926.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:46.374Z,1509053926.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:46.731Z,1509053926.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:46.798Z,1509053926.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:47.147Z,1509053927.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:47.217Z,1509053927.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:47.531Z,1509053927.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:47.552Z,1509053927.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:47.932Z,1509053927.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:47.955Z,1509053927.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:48.340Z,1509053928.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:48.361Z,1509053928.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:48.747Z,1509053928.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:48.763Z,1509053928.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:49.125Z,1509053929.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:49.178Z,1509053929.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:49.528Z,1509053929.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:49.567Z,1509053929.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:49.951Z,1509053929.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:49.981Z,1509053929.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:50.339Z,1509053930.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:50.376Z,1509053930.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:50.740Z,1509053930.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:50.776Z,1509053930.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:51.152Z,1509053931.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:51.194Z,1509053931.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:51.535Z,1509053931.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:51.559Z,1509053931.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:51.944Z,1509053931.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:51.960Z,1509053931.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:52.343Z,1509053932.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:52.360Z,1509053932.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:52.731Z,1509053932.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:52.761Z,1509053932.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:53.130Z,1509053933.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:53.184Z,1509053933.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:53.538Z,1509053933.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:53.574Z,1509053933.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:53.937Z,1509053933.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:53.974Z,1509053933.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:54.333Z,1509053934.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:54.378Z,1509053934.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:54.735Z,1509053934.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:54.760Z,1509053934.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:55.147Z,1509053935.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:55.192Z,1509053935.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:55.551Z,1509053935.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:55.609Z,1509053935.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:55.942Z,1509053935.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:55.958Z,1509053935.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:56.331Z,1509053936.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:56.357Z,1509053936.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:56.756Z,1509053936.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:56.773Z,1509053936.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:57.139Z,1509053937.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:57.184Z,1509053937.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:57.534Z,1509053937.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:57.585Z,1509053937.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:57.935Z,1509053937.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:57.960Z,1509053937.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:58.335Z,1509053938.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:58.377Z,1509053938.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:58.736Z,1509053938.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:58.757Z,1509053938.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:59.150Z,1509053939.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:59.245Z,1509053939.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:59.539Z,1509053939.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:59.556Z,1509053939.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:38:59.938Z,1509053939.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:38:59.954Z,1509053939.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:00.344Z,1509053940.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:00.381Z,1509053940.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:00.728Z,1509053940.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:00.758Z,1509053940.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:01.160Z,1509053941.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:01.183Z,1509053941.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:01.531Z,1509053941.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:01.572Z,1509053941.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:01.936Z,1509053941.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:01.965Z,1509053941.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:02.334Z,1509053942.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:02.346Z,1509053942.346 [BPC1](ERROR): Failed to receive battery data
2017-10-26T21:39:02.346Z,1509053942.346 [BPC1] Communications Fault, FailCount= 1
2017-10-26T21:39:02.346Z,1509053942.346 [BPC1](ERROR): Communications Fault
2017-10-26T21:39:02.375Z,1509053942.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:02.437Z,1509053942.437 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T21:39:02.736Z,1509053942.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:02.769Z,1509053942.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:03.142Z,1509053943.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:03.191Z,1509053943.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:03.532Z,1509053943.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:03.566Z,1509053943.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:03.672Z,1509053943.672 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:39:03.672Z,1509053943.672 [BPC1] No Fault, FailCount= 1
2017-10-26T21:39:03.937Z,1509053943.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:04.021Z,1509053944.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:04.330Z,1509053944.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:04.364Z,1509053944.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:04.741Z,1509053944.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:04.775Z,1509053944.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:05.134Z,1509053945.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:05.182Z,1509053945.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:05.535Z,1509053945.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:05.579Z,1509053945.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:05.934Z,1509053945.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:05.951Z,1509053945.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:06.336Z,1509053946.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:06.353Z,1509053946.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:06.736Z,1509053946.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:06.776Z,1509053946.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:07.160Z,1509053947.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:07.199Z,1509053947.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:07.536Z,1509053947.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:07.553Z,1509053947.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:07.929Z,1509053947.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:07.963Z,1509053947.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:08.341Z,1509053948.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:08.400Z,1509053948.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:08.746Z,1509053948.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:08.768Z,1509053948.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:09.159Z,1509053949.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:09.199Z,1509053949.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:09.543Z,1509053949.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:09.559Z,1509053949.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:09.940Z,1509053949.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:09.957Z,1509053949.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:10.339Z,1509053950.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:10.355Z,1509053950.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:10.743Z,1509053950.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:10.760Z,1509053950.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:11.130Z,1509053951.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:11.176Z,1509053951.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:11.536Z,1509053951.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:11.564Z,1509053951.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:12.072Z,1509053952.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:12.088Z,1509053952.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:12.479Z,1509053952.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:12.505Z,1509053952.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:12.883Z,1509053952.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:13.000Z,1509053953.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:13.282Z,1509053953.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:13.298Z,1509053953.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:13.675Z,1509053953.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:13.712Z,1509053953.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:14.052Z,1509053954.052 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:39:14.072Z,1509053954.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:14.089Z,1509053954.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:14.476Z,1509053954.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:14.492Z,1509053954.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:14.868Z,1509053954.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:14.985Z,1509053954.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:15.277Z,1509053955.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:15.306Z,1509053955.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:15.676Z,1509053955.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:15.692Z,1509053955.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:16.079Z,1509053956.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:16.095Z,1509053956.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:16.485Z,1509053956.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:16.502Z,1509053956.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:16.877Z,1509053956.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:16.000Z,1509053957.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:17.277Z,1509053957.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:17.293Z,1509053957.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:17.680Z,1509053957.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:17.697Z,1509053957.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:18.081Z,1509053958.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:18.097Z,1509053958.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:18.478Z,1509053958.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:18.500Z,1509053958.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:18.870Z,1509053958.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:18.899Z,1509053958.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:19.271Z,1509053959.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:19.333Z,1509053959.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:19.678Z,1509053959.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:19.695Z,1509053959.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:20.084Z,1509053960.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:20.101Z,1509053960.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:20.474Z,1509053960.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:20.542Z,1509053960.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:20.874Z,1509053960.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:20.903Z,1509053960.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:21.271Z,1509053961.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:21.317Z,1509053961.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:21.676Z,1509053961.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:21.729Z,1509053961.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:22.078Z,1509053962.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:22.109Z,1509053962.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:22.627Z,1509053962.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:22.659Z,1509053962.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:23.032Z,1509053963.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:23.070Z,1509053963.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:23.423Z,1509053963.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:23.439Z,1509053963.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:23.831Z,1509053963.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:23.880Z,1509053963.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:24.229Z,1509053964.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:24.246Z,1509053964.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:24.619Z,1509053964.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:24.643Z,1509053964.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:25.011Z,1509053965.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:25.049Z,1509053965.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:25.419Z,1509053965.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:25.451Z,1509053965.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:25.816Z,1509053965.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:25.845Z,1509053965.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:26.221Z,1509053966.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:26.249Z,1509053966.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:26.620Z,1509053966.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:26.644Z,1509053966.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:27.025Z,1509053967.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:27.041Z,1509053967.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:27.423Z,1509053967.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:27.446Z,1509053967.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:27.809Z,1509053967.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:27.847Z,1509053967.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:28.242Z,1509053968.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:28.269Z,1509053968.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:28.626Z,1509053968.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:28.656Z,1509053968.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:29.019Z,1509053969.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:29.055Z,1509053969.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:29.435Z,1509053969.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:29.477Z,1509053969.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:29.823Z,1509053969.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:29.840Z,1509053969.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:30.237Z,1509053970.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:30.254Z,1509053970.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:30.625Z,1509053970.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:30.641Z,1509053970.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:31.038Z,1509053971.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:31.059Z,1509053971.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:31.411Z,1509053971.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:31.448Z,1509053971.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:31.825Z,1509053971.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:31.870Z,1509053971.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:32.228Z,1509053972.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:32.262Z,1509053972.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:32.618Z,1509053972.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:32.673Z,1509053972.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:33.027Z,1509053973.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:33.057Z,1509053973.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:33.439Z,1509053973.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:33.475Z,1509053973.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:33.821Z,1509053973.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:33.887Z,1509053973.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:34.231Z,1509053974.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:34.252Z,1509053974.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:34.631Z,1509053974.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:34.648Z,1509053974.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:35.025Z,1509053975.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:35.088Z,1509053975.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:35.433Z,1509053975.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:35.449Z,1509053975.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:35.818Z,1509053975.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:35.886Z,1509053975.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:36.230Z,1509053976.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:36.285Z,1509053976.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:36.619Z,1509053976.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:36.651Z,1509053976.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:37.034Z,1509053977.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:37.069Z,1509053977.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:37.416Z,1509053977.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:37.449Z,1509053977.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:37.819Z,1509053977.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:37.836Z,1509053977.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:38.224Z,1509053978.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:38.254Z,1509053978.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:38.626Z,1509053978.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:38.642Z,1509053978.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:39.019Z,1509053979.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:39.051Z,1509053979.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:39.429Z,1509053979.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:39.446Z,1509053979.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:39.827Z,1509053979.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:39.855Z,1509053979.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:40.214Z,1509053980.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:40.250Z,1509053980.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:40.617Z,1509053980.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:40.641Z,1509053980.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:41.018Z,1509053981.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:41.038Z,1509053981.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:41.419Z,1509053981.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:41.455Z,1509053981.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:41.834Z,1509053981.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:41.851Z,1509053981.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:42.220Z,1509053982.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:42.237Z,1509053982.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:42.627Z,1509053982.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:42.644Z,1509053982.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:43.029Z,1509053983.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:43.058Z,1509053983.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:43.426Z,1509053983.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:43.455Z,1509053983.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:43.821Z,1509053983.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:43.837Z,1509053983.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:44.222Z,1509053984.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:44.243Z,1509053984.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:44.633Z,1509053984.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:44.678Z,1509053984.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:45.044Z,1509053985.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:45.061Z,1509053985.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:45.419Z,1509053985.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:45.452Z,1509053985.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:45.820Z,1509053985.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:45.837Z,1509053985.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:46.224Z,1509053986.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:46.240Z,1509053986.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:46.625Z,1509053986.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:46.687Z,1509053986.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:47.019Z,1509053987.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:47.043Z,1509053987.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:47.422Z,1509053987.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:47.465Z,1509053987.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:47.824Z,1509053987.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:47.840Z,1509053987.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:48.218Z,1509053988.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:48.290Z,1509053988.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:48.635Z,1509053988.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:48.684Z,1509053988.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:49.024Z,1509053989.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:49.041Z,1509053989.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:49.427Z,1509053989.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:49.488Z,1509053989.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:49.828Z,1509053989.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:49.844Z,1509053989.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:50.231Z,1509053990.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:50.289Z,1509053990.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:50.606Z,1509053990.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:50.667Z,1509053990.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:51.013Z,1509053991.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:51.050Z,1509053991.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:51.428Z,1509053991.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:51.444Z,1509053991.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:51.816Z,1509053991.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:51.854Z,1509053991.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:52.215Z,1509053992.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:52.252Z,1509053992.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:52.622Z,1509053992.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:52.662Z,1509053992.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:53.017Z,1509053993.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:53.045Z,1509053993.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:53.415Z,1509053993.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:53.443Z,1509053993.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:53.817Z,1509053993.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:53.841Z,1509053993.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:54.235Z,1509053994.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:54.251Z,1509053994.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:54.633Z,1509053994.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:54.650Z,1509053994.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:55.022Z,1509053995.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:55.047Z,1509053995.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:55.410Z,1509053995.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:55.447Z,1509053995.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:55.816Z,1509053995.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:55.851Z,1509053995.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:56.220Z,1509053996.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:56.245Z,1509053996.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:56.626Z,1509053996.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:56.658Z,1509053996.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:57.023Z,1509053997.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:57.055Z,1509053997.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:57.420Z,1509053997.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:57.448Z,1509053997.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:57.830Z,1509053997.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:57.846Z,1509053997.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:58.212Z,1509053998.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:58.245Z,1509053998.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:58.617Z,1509053998.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:58.660Z,1509053998.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:59.031Z,1509053999.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:59.051Z,1509053999.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:59.418Z,1509053999.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:59.435Z,1509053999.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:39:59.817Z,1509053999.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:39:59.859Z,1509053999.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:00.224Z,1509054000.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:00.240Z,1509054000.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:00.626Z,1509054000.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:00.642Z,1509054000.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:01.022Z,1509054001.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:01.073Z,1509054001.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:01.430Z,1509054001.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:01.476Z,1509054001.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:01.829Z,1509054001.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:01.845Z,1509054001.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:02.228Z,1509054002.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:02.244Z,1509054002.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:02.627Z,1509054002.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:02.643Z,1509054002.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:03.046Z,1509054003.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:03.105Z,1509054003.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:03.421Z,1509054003.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:03.450Z,1509054003.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:03.825Z,1509054003.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:03.878Z,1509054003.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:04.227Z,1509054004.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:04.243Z,1509054004.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:04.626Z,1509054004.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:04.679Z,1509054004.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:05.019Z,1509054005.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:05.083Z,1509054005.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:05.437Z,1509054005.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:05.468Z,1509054005.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:05.814Z,1509054005.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:05.859Z,1509054005.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:06.215Z,1509054006.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:06.254Z,1509054006.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:06.620Z,1509054006.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:06.666Z,1509054006.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:07.031Z,1509054007.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:07.080Z,1509054007.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:07.426Z,1509054007.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:07.443Z,1509054007.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:07.816Z,1509054007.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:07.853Z,1509054007.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:08.220Z,1509054008.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:08.252Z,1509054008.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:08.623Z,1509054008.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:08.652Z,1509054008.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:09.034Z,1509054009.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:09.063Z,1509054009.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:09.423Z,1509054009.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:09.439Z,1509054009.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:09.829Z,1509054009.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:09.848Z,1509054009.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:10.228Z,1509054010.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:10.244Z,1509054010.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:10.610Z,1509054010.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:10.648Z,1509054010.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:11.030Z,1509054011.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:11.070Z,1509054011.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:11.421Z,1509054011.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:11.458Z,1509054011.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:11.821Z,1509054011.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:11.837Z,1509054011.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:12.223Z,1509054012.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:12.247Z,1509054012.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:12.623Z,1509054012.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:12.640Z,1509054012.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:13.038Z,1509054013.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:13.079Z,1509054013.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:13.436Z,1509054013.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:13.452Z,1509054013.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:13.816Z,1509054013.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:13.852Z,1509054013.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:14.219Z,1509054014.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:14.248Z,1509054014.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:14.593Z,1509054014.593 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:40:14.619Z,1509054014.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:14.664Z,1509054014.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:15.052Z,1509054015.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:15.105Z,1509054015.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:15.438Z,1509054015.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:15.480Z,1509054015.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:15.821Z,1509054015.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:15.846Z,1509054015.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:16.222Z,1509054016.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:16.239Z,1509054016.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:16.622Z,1509054016.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:16.642Z,1509054016.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:17.032Z,1509054017.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:17.055Z,1509054017.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:17.421Z,1509054017.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:17.483Z,1509054017.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:17.819Z,1509054017.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:17.846Z,1509054017.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:18.249Z,1509054018.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:18.300Z,1509054018.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:18.635Z,1509054018.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:18.652Z,1509054018.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:19.042Z,1509054019.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:19.112Z,1509054019.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:19.424Z,1509054019.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:19.474Z,1509054019.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:19.827Z,1509054019.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:19.843Z,1509054019.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:20.357Z,1509054020.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:20.400Z,1509054020.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:20.758Z,1509054020.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:20.792Z,1509054020.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:21.185Z,1509054021.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:21.201Z,1509054021.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:21.558Z,1509054021.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:21.582Z,1509054021.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:21.965Z,1509054021.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:22.002Z,1509054022.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:22.368Z,1509054022.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:22.417Z,1509054022.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:22.765Z,1509054022.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:22.781Z,1509054022.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:23.181Z,1509054023.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:23.210Z,1509054023.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:23.574Z,1509054023.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:23.590Z,1509054023.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:23.965Z,1509054023.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:23.985Z,1509054023.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:24.374Z,1509054024.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:24.390Z,1509054024.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:24.775Z,1509054024.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:24.791Z,1509054024.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:25.173Z,1509054025.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:25.205Z,1509054025.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:25.564Z,1509054025.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:25.595Z,1509054025.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:25.965Z,1509054025.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:25.998Z,1509054025.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:26.357Z,1509054026.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:26.401Z,1509054026.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:26.762Z,1509054026.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:26.778Z,1509054026.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:27.180Z,1509054027.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:27.230Z,1509054027.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:27.569Z,1509054027.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:27.585Z,1509054027.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:27.970Z,1509054027.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:28.048Z,1509054028.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:28.375Z,1509054028.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:28.393Z,1509054028.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:28.767Z,1509054028.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:28.784Z,1509054028.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:29.167Z,1509054029.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:29.240Z,1509054029.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:29.561Z,1509054029.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:29.590Z,1509054029.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:29.966Z,1509054029.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:30.022Z,1509054030.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:30.369Z,1509054030.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:30.385Z,1509054030.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:30.765Z,1509054030.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:30.782Z,1509054030.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:31.182Z,1509054031.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:31.231Z,1509054031.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:31.569Z,1509054031.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:31.637Z,1509054031.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:31.975Z,1509054031.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:31.991Z,1509054031.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:32.371Z,1509054032.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:32.434Z,1509054032.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:32.762Z,1509054032.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:32.791Z,1509054032.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:33.185Z,1509054033.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:33.252Z,1509054033.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:33.561Z,1509054033.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:33.599Z,1509054033.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:33.960Z,1509054033.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:34.033Z,1509054034.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:34.364Z,1509054034.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:34.396Z,1509054034.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:34.765Z,1509054034.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:34.821Z,1509054034.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:35.405Z,1509054035.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:35.440Z,1509054035.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:35.762Z,1509054035.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:35.811Z,1509054035.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:36.195Z,1509054036.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:36.211Z,1509054036.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:36.573Z,1509054036.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:36.606Z,1509054036.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:37.004Z,1509054037.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:37.024Z,1509054037.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:37.383Z,1509054037.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:37.426Z,1509054037.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:37.766Z,1509054037.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:37.803Z,1509054037.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:38.204Z,1509054038.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:38.240Z,1509054038.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:38.581Z,1509054038.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:38.618Z,1509054038.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:39.030Z,1509054039.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:39.083Z,1509054039.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:39.370Z,1509054039.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:39.412Z,1509054039.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:39.796Z,1509054039.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:39.812Z,1509054039.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:40.204Z,1509054040.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:40.220Z,1509054040.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:40.595Z,1509054040.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:40.632Z,1509054040.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:40.998Z,1509054040.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:41.036Z,1509054041.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:41.365Z,1509054041.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:41.424Z,1509054041.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:41.780Z,1509054041.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:41.805Z,1509054041.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:42.191Z,1509054042.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:42.213Z,1509054042.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:42.587Z,1509054042.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:42.614Z,1509054042.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:43.011Z,1509054043.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:43.031Z,1509054043.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:43.377Z,1509054043.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:43.408Z,1509054043.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:43.778Z,1509054043.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:43.820Z,1509054043.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:44.192Z,1509054044.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:44.225Z,1509054044.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:44.561Z,1509054044.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:44.609Z,1509054044.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:45.009Z,1509054045.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:45.074Z,1509054045.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:45.368Z,1509054045.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:45.409Z,1509054045.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:45.770Z,1509054045.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:45.851Z,1509054045.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:46.202Z,1509054046.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:46.224Z,1509054046.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:46.579Z,1509054046.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:46.628Z,1509054046.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:47.054Z,1509054047.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:47.080Z,1509054047.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:47.371Z,1509054047.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:47.433Z,1509054047.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:47.769Z,1509054047.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:47.834Z,1509054047.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:48.199Z,1509054048.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:48.216Z,1509054048.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:48.600Z,1509054048.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:48.617Z,1509054048.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:49.037Z,1509054049.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:49.061Z,1509054049.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:49.383Z,1509054049.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:49.411Z,1509054049.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:49.776Z,1509054049.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:49.808Z,1509054049.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:50.177Z,1509054050.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:50.214Z,1509054050.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:50.600Z,1509054050.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:50.624Z,1509054050.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:51.002Z,1509054051.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:51.029Z,1509054051.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:51.388Z,1509054051.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:51.424Z,1509054051.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:51.813Z,1509054051.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:51.854Z,1509054051.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:52.171Z,1509054052.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:52.231Z,1509054052.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:52.575Z,1509054052.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:52.616Z,1509054052.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:53.047Z,1509054053.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:53.096Z,1509054053.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:53.377Z,1509054053.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:53.422Z,1509054053.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:53.782Z,1509054053.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:53.815Z,1509054053.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:54.188Z,1509054054.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:54.211Z,1509054054.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:54.586Z,1509054054.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:54.610Z,1509054054.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:55.055Z,1509054055.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:55.101Z,1509054055.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:55.386Z,1509054055.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:55.413Z,1509054055.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:55.808Z,1509054055.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:55.840Z,1509054055.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:56.190Z,1509054056.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:56.243Z,1509054056.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:56.587Z,1509054056.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:56.622Z,1509054056.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:57.015Z,1509054057.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:57.057Z,1509054057.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:57.405Z,1509054057.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:57.450Z,1509054057.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:57.794Z,1509054057.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:57.824Z,1509054057.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:58.184Z,1509054058.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:58.246Z,1509054058.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:58.589Z,1509054058.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:58.613Z,1509054058.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:59.027Z,1509054059.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:59.069Z,1509054059.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:59.384Z,1509054059.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:59.420Z,1509054059.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:40:59.775Z,1509054059.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:40:59.857Z,1509054059.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:00.189Z,1509054060.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:00.200Z,1509054060.200 [PNI_TCM](ERROR): CRC does not match. Expected:0x2066 got:0x46528
2017-10-26T21:41:00.232Z,1509054060.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:00.568Z,1509054060.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:00.603Z,1509054060.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:01.030Z,1509054061.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:01.090Z,1509054061.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:01.383Z,1509054061.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:01.418Z,1509054061.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:01.762Z,1509054061.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:01.848Z,1509054061.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:02.195Z,1509054062.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:02.253Z,1509054062.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:02.571Z,1509054062.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:02.602Z,1509054062.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:03.045Z,1509054063.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:03.097Z,1509054063.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:03.373Z,1509054063.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:03.413Z,1509054063.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:03.779Z,1509054063.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:03.819Z,1509054063.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:04.190Z,1509054064.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:04.218Z,1509054064.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:04.580Z,1509054064.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:04.627Z,1509054064.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:05.034Z,1509054065.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:05.040Z,1509054065.040 [PNI_TCM](ERROR): CRC does not match. Expected:0x9561 got:0x7489
2017-10-26T21:41:05.077Z,1509054065.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:05.383Z,1509054065.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:05.425Z,1509054065.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:05.778Z,1509054065.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:05.802Z,1509054065.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:06.196Z,1509054066.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:06.216Z,1509054066.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:06.569Z,1509054066.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:06.608Z,1509054066.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:06.980Z,1509054066.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:07.079Z,1509054067.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:07.383Z,1509054067.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:07.408Z,1509054067.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:07.764Z,1509054067.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:07.809Z,1509054067.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:08.192Z,1509054068.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:08.216Z,1509054068.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:08.605Z,1509054068.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:08.660Z,1509054068.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:08.989Z,1509054068.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:09.032Z,1509054069.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:09.379Z,1509054069.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:09.418Z,1509054069.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:09.790Z,1509054069.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:09.822Z,1509054069.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:10.194Z,1509054070.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:10.215Z,1509054070.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:10.588Z,1509054070.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:10.618Z,1509054070.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:10.977Z,1509054070.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:11.016Z,1509054071.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:11.373Z,1509054071.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:11.412Z,1509054071.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:11.799Z,1509054071.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:11.816Z,1509054071.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:12.200Z,1509054072.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:12.220Z,1509054072.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:12.564Z,1509054072.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:12.632Z,1509054072.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:12.966Z,1509054072.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:13.044Z,1509054073.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:13.394Z,1509054073.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:13.419Z,1509054073.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:13.790Z,1509054073.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:13.815Z,1509054073.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:14.226Z,1509054074.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:14.284Z,1509054074.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:14.541Z,1509054074.541 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:41:14.576Z,1509054074.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:14.625Z,1509054074.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:15.055Z,1509054075.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:15.103Z,1509054075.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:15.406Z,1509054075.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:15.465Z,1509054075.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:15.771Z,1509054075.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:15.822Z,1509054075.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:16.189Z,1509054076.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:16.258Z,1509054076.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:16.593Z,1509054076.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:16.618Z,1509054076.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:17.016Z,1509054077.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:17.090Z,1509054077.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:17.358Z,1509054077.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:17.399Z,1509054077.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:17.761Z,1509054077.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:17.811Z,1509054077.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:18.193Z,1509054078.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:18.210Z,1509054078.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:18.572Z,1509054078.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:18.605Z,1509054078.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:19.001Z,1509054079.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:19.026Z,1509054079.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:19.382Z,1509054079.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:19.417Z,1509054079.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:19.759Z,1509054079.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:19.796Z,1509054079.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:20.199Z,1509054080.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:20.216Z,1509054080.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:20.566Z,1509054080.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:20.606Z,1509054080.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:20.998Z,1509054080.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:21.059Z,1509054081.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:21.384Z,1509054081.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:21.409Z,1509054081.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:21.771Z,1509054081.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:21.804Z,1509054081.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:22.210Z,1509054082.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:22.234Z,1509054082.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:22.560Z,1509054082.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:22.600Z,1509054082.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:23.016Z,1509054083.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:23.048Z,1509054083.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:23.391Z,1509054083.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:23.408Z,1509054083.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:23.780Z,1509054083.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:23.820Z,1509054083.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:24.205Z,1509054084.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:24.227Z,1509054084.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:24.579Z,1509054084.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:24.615Z,1509054084.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:25.014Z,1509054085.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:25.039Z,1509054085.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:25.399Z,1509054085.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:25.436Z,1509054085.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:25.806Z,1509054085.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:25.826Z,1509054085.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:26.324Z,1509054086.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:26.362Z,1509054086.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:26.725Z,1509054086.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:26.753Z,1509054086.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:27.123Z,1509054087.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:27.178Z,1509054087.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:27.535Z,1509054087.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:27.607Z,1509054087.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:27.916Z,1509054087.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:27.952Z,1509054087.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:28.314Z,1509054088.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:28.351Z,1509054088.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:28.718Z,1509054088.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:28.780Z,1509054088.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:29.125Z,1509054089.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:29.171Z,1509054089.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:29.526Z,1509054089.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:29.579Z,1509054089.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:29.920Z,1509054089.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:29.936Z,1509054089.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:30.328Z,1509054090.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:30.384Z,1509054090.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:30.722Z,1509054090.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:30.745Z,1509054090.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:31.125Z,1509054091.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:31.229Z,1509054091.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:31.527Z,1509054091.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:31.556Z,1509054091.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:31.918Z,1509054091.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:31.946Z,1509054091.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:32.330Z,1509054092.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:32.362Z,1509054092.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:32.724Z,1509054092.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:32.754Z,1509054092.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:33.115Z,1509054093.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:33.168Z,1509054093.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:33.526Z,1509054093.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:33.554Z,1509054093.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:33.927Z,1509054093.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:33.943Z,1509054093.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:34.334Z,1509054094.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:34.375Z,1509054094.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:34.718Z,1509054094.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:34.755Z,1509054094.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:35.157Z,1509054095.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:35.189Z,1509054095.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:35.520Z,1509054095.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:35.548Z,1509054095.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:35.926Z,1509054095.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:35.942Z,1509054095.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:36.326Z,1509054096.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:36.346Z,1509054096.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:36.727Z,1509054096.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:36.763Z,1509054096.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:37.118Z,1509054097.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:37.179Z,1509054097.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:37.518Z,1509054097.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:37.554Z,1509054097.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:37.942Z,1509054097.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:37.962Z,1509054097.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:38.321Z,1509054098.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:38.350Z,1509054098.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:38.724Z,1509054098.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:38.748Z,1509054098.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:39.283Z,1509054099.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:39.327Z,1509054099.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:39.690Z,1509054099.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:39.723Z,1509054099.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:40.084Z,1509054100.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:40.101Z,1509054100.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:40.498Z,1509054100.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:40.534Z,1509054100.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:40.907Z,1509054100.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:41.010Z,1509054101.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:41.280Z,1509054101.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:41.324Z,1509054101.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:41.688Z,1509054101.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:41.717Z,1509054101.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:42.087Z,1509054102.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:42.161Z,1509054102.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:42.497Z,1509054102.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:42.535Z,1509054102.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:42.879Z,1509054102.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:43.010Z,1509054103.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:43.286Z,1509054103.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:43.315Z,1509054103.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:43.682Z,1509054103.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:43.709Z,1509054103.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:44.081Z,1509054104.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:44.171Z,1509054104.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:44.480Z,1509054104.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:44.512Z,1509054104.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:44.878Z,1509054104.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:44.989Z,1509054104.989 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:44.990Z,1509054104.990 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 38
2017-10-26T21:41:44.990Z,1509054104.990 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:41:45.002Z,1509054105.002 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:45.002Z,1509054105.002 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 38
2017-10-26T21:41:45.002Z,1509054105.002 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:41:45.078Z,1509054105.078 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:41:45.078Z,1509054105.078 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:41:45.291Z,1509054105.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:45.386Z,1509054105.386 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:41:45.387Z,1509054105.387 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 38
2017-10-26T21:41:45.387Z,1509054105.387 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:41:45.387Z,1509054105.387 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 38
2017-10-26T21:41:45.695Z,1509054105.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:45.710Z,1509054105.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:41:45.710Z,1509054105.710 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:41:45.711Z,1509054105.711 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:41:45.713Z,1509054105.713 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:41:45.714Z,1509054105.714 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:41:45.714Z,1509054105.714 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:41:46.092Z,1509054106.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:46.136Z,1509054106.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:46.485Z,1509054106.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:46.501Z,1509054106.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:46.884Z,1509054106.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:46.909Z,1509054106.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:47.277Z,1509054107.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:47.315Z,1509054107.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:47.684Z,1509054107.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:47.717Z,1509054107.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:48.092Z,1509054108.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:48.183Z,1509054108.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:48.489Z,1509054108.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:48.513Z,1509054108.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:48.945Z,1509054108.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:49.016Z,1509054109.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:49.284Z,1509054109.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:49.326Z,1509054109.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:49.687Z,1509054109.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:49.716Z,1509054109.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:50.090Z,1509054110.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:50.106Z,1509054110.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:50.495Z,1509054110.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:50.512Z,1509054110.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:50.898Z,1509054110.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:50.915Z,1509054110.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:51.285Z,1509054111.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:51.301Z,1509054111.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:51.692Z,1509054111.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:51.729Z,1509054111.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:52.085Z,1509054112.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:52.106Z,1509054112.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:52.491Z,1509054112.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:52.506Z,1509054112.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:52.897Z,1509054112.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:52.914Z,1509054112.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:53.280Z,1509054113.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:53.316Z,1509054113.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:53.689Z,1509054113.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:53.744Z,1509054113.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:54.081Z,1509054114.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:54.101Z,1509054114.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:54.486Z,1509054114.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:54.503Z,1509054114.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:54.891Z,1509054114.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:54.908Z,1509054114.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:55.291Z,1509054115.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:55.321Z,1509054115.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:55.692Z,1509054115.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:55.730Z,1509054115.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:56.090Z,1509054116.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:56.119Z,1509054116.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:56.489Z,1509054116.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:56.506Z,1509054116.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:56.900Z,1509054116.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:57.014Z,1509054117.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:57.279Z,1509054117.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:57.337Z,1509054117.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:57.686Z,1509054117.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:57.718Z,1509054117.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:58.085Z,1509054118.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:58.181Z,1509054118.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:58.481Z,1509054118.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:58.497Z,1509054118.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:58.898Z,1509054118.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:59.021Z,1509054119.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:59.284Z,1509054119.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:59.349Z,1509054119.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:41:59.690Z,1509054119.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:41:59.707Z,1509054119.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:00.096Z,1509054120.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:00.113Z,1509054120.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:00.482Z,1509054120.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:00.530Z,1509054120.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:00.885Z,1509054120.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:00.995Z,1509054120.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:01.293Z,1509054121.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:01.311Z,1509054121.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:01.697Z,1509054121.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:01.713Z,1509054121.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:02.085Z,1509054122.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:02.115Z,1509054122.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:02.486Z,1509054122.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:02.506Z,1509054122.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:02.892Z,1509054122.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:02.914Z,1509054122.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:03.282Z,1509054123.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:03.303Z,1509054123.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:03.690Z,1509054123.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:03.706Z,1509054123.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:04.089Z,1509054124.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:04.112Z,1509054124.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:04.478Z,1509054124.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:04.494Z,1509054124.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:04.884Z,1509054124.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:04.903Z,1509054124.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:05.283Z,1509054125.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:05.320Z,1509054125.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:05.680Z,1509054125.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:05.696Z,1509054125.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:06.086Z,1509054126.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:06.105Z,1509054126.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:06.489Z,1509054126.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:06.506Z,1509054126.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:06.886Z,1509054126.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:07.012Z,1509054127.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:07.293Z,1509054127.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:07.324Z,1509054127.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:07.686Z,1509054127.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:07.718Z,1509054127.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:08.086Z,1509054128.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:08.102Z,1509054128.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:08.488Z,1509054128.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:08.513Z,1509054128.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:08.893Z,1509054128.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:08.917Z,1509054128.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:09.284Z,1509054129.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:09.328Z,1509054129.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:09.685Z,1509054129.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:09.701Z,1509054129.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:10.088Z,1509054130.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:10.097Z,1509054130.097 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T21:42:10.097Z,1509054130.097 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:42:10.097Z,1509054130.097 [BPC1](ERROR): Data Fault
2017-10-26T21:42:10.106Z,1509054130.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:10.245Z,1509054130.245 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:42:10.485Z,1509054130.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:10.501Z,1509054130.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:10.891Z,1509054130.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:10.907Z,1509054130.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:11.279Z,1509054131.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:11.314Z,1509054131.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:11.410Z,1509054131.410 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:42:11.410Z,1509054131.410 [BPC1] No Fault, FailCount= 1
2017-10-26T21:42:11.684Z,1509054131.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:11.774Z,1509054131.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:12.085Z,1509054132.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:12.151Z,1509054132.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:12.479Z,1509054132.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:12.498Z,1509054132.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:12.887Z,1509054132.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:12.999Z,1509054132.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:13.284Z,1509054133.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:13.322Z,1509054133.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:13.687Z,1509054133.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:13.723Z,1509054133.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:14.095Z,1509054134.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:14.178Z,1509054134.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:14.487Z,1509054134.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:14.503Z,1509054134.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:14.907Z,1509054134.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:15.005Z,1509054135.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:15.260Z,1509054135.260 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:42:15.300Z,1509054135.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:15.316Z,1509054135.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:15.690Z,1509054135.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:15.716Z,1509054135.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:16.088Z,1509054136.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:16.109Z,1509054136.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:16.487Z,1509054136.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:16.519Z,1509054136.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:16.898Z,1509054136.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:16.985Z,1509054136.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:17.291Z,1509054137.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:17.307Z,1509054137.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:17.681Z,1509054137.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:17.709Z,1509054137.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:18.099Z,1509054138.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:18.116Z,1509054138.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:18.485Z,1509054138.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:18.521Z,1509054138.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:18.880Z,1509054138.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:18.954Z,1509054138.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:19.290Z,1509054139.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:19.306Z,1509054139.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:19.692Z,1509054139.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:19.733Z,1509054139.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:20.079Z,1509054140.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:20.096Z,1509054140.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:20.479Z,1509054140.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:20.520Z,1509054140.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:20.902Z,1509054140.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:21.012Z,1509054141.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:21.290Z,1509054141.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:21.318Z,1509054141.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:21.688Z,1509054141.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:21.704Z,1509054141.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:22.093Z,1509054142.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:22.115Z,1509054142.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:22.495Z,1509054142.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:22.511Z,1509054142.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:22.877Z,1509054142.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:22.932Z,1509054142.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:23.285Z,1509054143.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:23.322Z,1509054143.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:23.688Z,1509054143.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:23.705Z,1509054143.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:24.089Z,1509054144.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:24.219Z,1509054144.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:24.494Z,1509054144.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:24.510Z,1509054144.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:24.888Z,1509054144.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:24.904Z,1509054144.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:25.293Z,1509054145.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:25.350Z,1509054145.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:25.690Z,1509054145.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:25.711Z,1509054145.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:26.095Z,1509054146.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:26.182Z,1509054146.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:26.495Z,1509054146.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:26.547Z,1509054146.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:26.897Z,1509054146.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:26.913Z,1509054146.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:27.296Z,1509054147.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:27.332Z,1509054147.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:27.681Z,1509054147.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:27.702Z,1509054147.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:28.094Z,1509054148.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:28.111Z,1509054148.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:28.490Z,1509054148.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:28.506Z,1509054148.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:28.917Z,1509054148.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:28.993Z,1509054148.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:29.302Z,1509054149.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:29.332Z,1509054149.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:29.684Z,1509054149.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:29.720Z,1509054149.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:30.093Z,1509054150.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:30.131Z,1509054150.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:30.489Z,1509054150.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:30.505Z,1509054150.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:30.947Z,1509054150.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:31.004Z,1509054151.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:31.291Z,1509054151.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:31.308Z,1509054151.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:31.678Z,1509054151.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:31.715Z,1509054151.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:32.101Z,1509054152.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:32.208Z,1509054152.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:32.484Z,1509054152.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:32.521Z,1509054152.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:32.908Z,1509054152.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:32.996Z,1509054152.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:33.287Z,1509054153.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:33.304Z,1509054153.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:33.686Z,1509054153.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:33.716Z,1509054153.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:34.078Z,1509054154.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:34.111Z,1509054154.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:34.491Z,1509054154.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:34.532Z,1509054154.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:34.904Z,1509054154.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:35.007Z,1509054155.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:35.293Z,1509054155.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:35.309Z,1509054155.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:35.692Z,1509054155.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:35.716Z,1509054155.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:36.083Z,1509054156.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:36.120Z,1509054156.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:36.494Z,1509054156.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:36.530Z,1509054156.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:36.899Z,1509054156.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:37.003Z,1509054157.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:37.287Z,1509054157.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:37.320Z,1509054157.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:37.701Z,1509054157.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:37.732Z,1509054157.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:38.081Z,1509054158.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:38.109Z,1509054158.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:38.481Z,1509054158.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:38.586Z,1509054158.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:38.924Z,1509054158.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:38.976Z,1509054158.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:39.283Z,1509054159.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:39.299Z,1509054159.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:39.695Z,1509054159.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:39.747Z,1509054159.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:40.090Z,1509054160.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:40.106Z,1509054160.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:40.497Z,1509054160.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:40.557Z,1509054160.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:40.892Z,1509054160.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:41.011Z,1509054161.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:41.289Z,1509054161.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:41.307Z,1509054161.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:41.693Z,1509054161.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:41.710Z,1509054161.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:42.090Z,1509054162.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:42.111Z,1509054162.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:42.487Z,1509054162.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:42.515Z,1509054162.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:42.885Z,1509054162.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:42.914Z,1509054162.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:43.281Z,1509054163.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:43.301Z,1509054163.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:43.799Z,1509054163.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:43.832Z,1509054163.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:44.210Z,1509054164.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:44.239Z,1509054164.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:44.618Z,1509054164.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:44.653Z,1509054164.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:45.023Z,1509054165.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:45.072Z,1509054165.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:45.397Z,1509054165.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:45.429Z,1509054165.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:45.805Z,1509054165.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:45.836Z,1509054165.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:46.202Z,1509054166.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:46.226Z,1509054166.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:46.602Z,1509054166.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:46.638Z,1509054166.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:47.011Z,1509054167.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:47.033Z,1509054167.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:47.410Z,1509054167.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:47.427Z,1509054167.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:47.811Z,1509054167.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:47.835Z,1509054167.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:48.223Z,1509054168.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:48.242Z,1509054168.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:48.637Z,1509054168.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:48.700Z,1509054168.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:49.039Z,1509054169.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:49.057Z,1509054169.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:49.410Z,1509054169.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:49.439Z,1509054169.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:49.810Z,1509054169.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:49.841Z,1509054169.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:50.201Z,1509054170.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:50.224Z,1509054170.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:50.612Z,1509054170.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:50.628Z,1509054170.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:51.009Z,1509054171.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:51.025Z,1509054171.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:51.402Z,1509054171.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:51.425Z,1509054171.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:51.823Z,1509054171.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:51.840Z,1509054171.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:52.218Z,1509054172.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:52.227Z,1509054172.227 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T21:42:52.227Z,1509054172.227 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:42:52.227Z,1509054172.227 [BPC1](ERROR): Data Fault
2017-10-26T21:42:52.237Z,1509054172.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:52.345Z,1509054172.345 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:42:52.636Z,1509054172.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:52.679Z,1509054172.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:52.999Z,1509054172.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:53.027Z,1509054173.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:53.400Z,1509054173.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:53.438Z,1509054173.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:53.491Z,1509054173.491 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:42:53.491Z,1509054173.491 [BPC1] No Fault, FailCount= 1
2017-10-26T21:42:53.821Z,1509054173.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:53.910Z,1509054173.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:54.235Z,1509054174.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:54.271Z,1509054174.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:54.628Z,1509054174.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:54.660Z,1509054174.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:54.997Z,1509054174.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:55.056Z,1509054175.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:55.401Z,1509054175.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:55.437Z,1509054175.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:55.812Z,1509054175.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:55.845Z,1509054175.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:56.207Z,1509054176.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:56.235Z,1509054176.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:56.605Z,1509054176.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:56.626Z,1509054176.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:57.029Z,1509054177.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:57.059Z,1509054177.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:57.405Z,1509054177.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:57.435Z,1509054177.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:57.808Z,1509054177.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:57.824Z,1509054177.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:58.208Z,1509054178.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:58.228Z,1509054178.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:58.613Z,1509054178.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:58.637Z,1509054178.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:59.006Z,1509054179.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:59.030Z,1509054179.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:59.398Z,1509054179.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:59.414Z,1509054179.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:42:59.805Z,1509054179.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:42:59.821Z,1509054179.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:00.224Z,1509054180.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:00.249Z,1509054180.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:00.603Z,1509054180.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:00.636Z,1509054180.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:01.043Z,1509054181.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:01.087Z,1509054181.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:01.416Z,1509054181.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:01.441Z,1509054181.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:01.809Z,1509054181.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:01.830Z,1509054181.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:02.367Z,1509054182.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:02.383Z,1509054182.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:02.761Z,1509054182.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:02.778Z,1509054182.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:03.179Z,1509054183.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:03.195Z,1509054183.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:03.569Z,1509054183.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:03.586Z,1509054183.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:03.973Z,1509054183.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:03.996Z,1509054183.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:04.355Z,1509054184.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:04.385Z,1509054184.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:04.782Z,1509054184.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:04.798Z,1509054184.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:05.185Z,1509054185.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:05.201Z,1509054185.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:05.556Z,1509054185.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:05.591Z,1509054185.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:05.970Z,1509054185.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:05.986Z,1509054185.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:06.371Z,1509054186.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:06.393Z,1509054186.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:06.770Z,1509054186.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:06.835Z,1509054186.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:07.190Z,1509054187.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:07.216Z,1509054187.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:07.578Z,1509054187.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:07.635Z,1509054187.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:07.968Z,1509054187.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:07.984Z,1509054187.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:08.373Z,1509054188.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:08.424Z,1509054188.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:08.773Z,1509054188.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:08.789Z,1509054188.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:09.172Z,1509054189.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:09.223Z,1509054189.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:09.574Z,1509054189.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:09.591Z,1509054189.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:09.954Z,1509054189.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:09.987Z,1509054189.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:10.369Z,1509054190.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:10.410Z,1509054190.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:10.762Z,1509054190.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:10.791Z,1509054190.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:11.175Z,1509054191.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:11.198Z,1509054191.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:11.577Z,1509054191.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:11.603Z,1509054191.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:11.959Z,1509054191.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:11.987Z,1509054191.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:12.368Z,1509054192.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:12.390Z,1509054192.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:12.766Z,1509054192.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:12.783Z,1509054192.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:13.183Z,1509054193.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:13.211Z,1509054193.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:13.574Z,1509054193.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:13.590Z,1509054193.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:13.973Z,1509054193.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:13.989Z,1509054193.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:14.361Z,1509054194.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:14.396Z,1509054194.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:14.761Z,1509054194.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:14.788Z,1509054194.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:15.142Z,1509054195.142 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:43:15.190Z,1509054195.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:15.222Z,1509054195.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:15.566Z,1509054195.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:15.594Z,1509054195.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:15.967Z,1509054195.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:15.984Z,1509054195.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:16.372Z,1509054196.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:16.389Z,1509054196.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:16.765Z,1509054196.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:16.781Z,1509054196.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:17.195Z,1509054197.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:17.228Z,1509054197.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:17.555Z,1509054197.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:17.588Z,1509054197.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:17.952Z,1509054197.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:17.969Z,1509054197.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:18.368Z,1509054198.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:18.401Z,1509054198.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:18.768Z,1509054198.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:18.809Z,1509054198.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:19.177Z,1509054199.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:19.224Z,1509054199.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:19.567Z,1509054199.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:19.600Z,1509054199.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:19.964Z,1509054199.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:19.982Z,1509054199.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:20.373Z,1509054200.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:20.390Z,1509054200.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:20.755Z,1509054200.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:20.792Z,1509054200.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:21.181Z,1509054201.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:21.250Z,1509054201.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:21.562Z,1509054201.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:21.590Z,1509054201.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:21.970Z,1509054201.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:22.025Z,1509054202.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:22.371Z,1509054202.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:22.388Z,1509054202.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:22.761Z,1509054202.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:22.826Z,1509054202.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:23.180Z,1509054203.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:23.226Z,1509054203.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:23.555Z,1509054203.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:23.594Z,1509054203.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:23.958Z,1509054203.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:23.987Z,1509054203.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:24.365Z,1509054204.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:24.397Z,1509054204.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:24.766Z,1509054204.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:24.796Z,1509054204.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:25.192Z,1509054205.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:25.209Z,1509054205.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:25.566Z,1509054205.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:25.598Z,1509054205.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:25.962Z,1509054205.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:25.986Z,1509054205.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:26.371Z,1509054206.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:26.411Z,1509054206.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:26.767Z,1509054206.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:26.783Z,1509054206.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:27.170Z,1509054207.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:27.213Z,1509054207.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:27.561Z,1509054207.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:27.577Z,1509054207.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:27.963Z,1509054207.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:27.979Z,1509054207.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:28.371Z,1509054208.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:28.422Z,1509054208.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:28.759Z,1509054208.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:28.791Z,1509054208.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:29.180Z,1509054209.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:29.196Z,1509054209.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:29.625Z,1509054209.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:29.682Z,1509054209.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:29.972Z,1509054209.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:29.988Z,1509054209.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:30.354Z,1509054210.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:30.397Z,1509054210.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:30.754Z,1509054210.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:30.782Z,1509054210.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:31.179Z,1509054211.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:31.202Z,1509054211.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:31.574Z,1509054211.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:31.669Z,1509054211.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:31.965Z,1509054211.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:31.981Z,1509054211.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:32.367Z,1509054212.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:32.383Z,1509054212.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:32.771Z,1509054212.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:32.788Z,1509054212.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:33.181Z,1509054213.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:33.203Z,1509054213.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:33.573Z,1509054213.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:33.589Z,1509054213.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:33.959Z,1509054213.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:33.987Z,1509054213.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:34.356Z,1509054214.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:34.389Z,1509054214.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:34.764Z,1509054214.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:34.795Z,1509054214.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:35.189Z,1509054215.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:35.254Z,1509054215.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:35.568Z,1509054215.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:35.623Z,1509054215.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:35.967Z,1509054215.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:35.984Z,1509054215.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:36.372Z,1509054216.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:36.401Z,1509054216.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:36.770Z,1509054216.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:36.817Z,1509054216.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:37.176Z,1509054217.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:37.219Z,1509054217.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:37.580Z,1509054217.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:37.634Z,1509054217.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:37.972Z,1509054217.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:37.988Z,1509054217.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:38.492Z,1509054218.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:38.550Z,1509054218.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:38.902Z,1509054218.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:38.919Z,1509054218.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:39.297Z,1509054219.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:39.331Z,1509054219.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:39.722Z,1509054219.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:39.747Z,1509054219.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:40.104Z,1509054220.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:40.159Z,1509054220.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:40.495Z,1509054220.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:40.525Z,1509054220.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:40.898Z,1509054220.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:40.923Z,1509054220.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:41.326Z,1509054221.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:41.362Z,1509054221.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:41.704Z,1509054221.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:41.737Z,1509054221.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:42.106Z,1509054222.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:42.122Z,1509054222.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:42.496Z,1509054222.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:42.534Z,1509054222.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:42.897Z,1509054222.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:42.927Z,1509054222.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:43.295Z,1509054223.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:43.345Z,1509054223.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:43.719Z,1509054223.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:43.748Z,1509054223.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:44.103Z,1509054224.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:44.191Z,1509054224.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:44.501Z,1509054224.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:44.517Z,1509054224.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:44.903Z,1509054224.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:44.919Z,1509054224.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:45.305Z,1509054225.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:45.326Z,1509054225.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:45.713Z,1509054225.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:45.734Z,1509054225.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:46.092Z,1509054226.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:46.127Z,1509054226.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:46.496Z,1509054226.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:46.538Z,1509054226.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:46.893Z,1509054226.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:46.988Z,1509054226.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:47.298Z,1509054227.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:47.322Z,1509054227.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:47.708Z,1509054227.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:47.741Z,1509054227.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:48.095Z,1509054228.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:48.142Z,1509054228.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:48.500Z,1509054228.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:48.531Z,1509054228.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:48.923Z,1509054228.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:48.999Z,1509054228.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:49.308Z,1509054229.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:49.340Z,1509054229.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:49.696Z,1509054229.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:49.728Z,1509054229.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:50.096Z,1509054230.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:50.139Z,1509054230.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:50.506Z,1509054230.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:50.582Z,1509054230.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:50.907Z,1509054230.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:51.023Z,1509054231.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:51.290Z,1509054231.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:51.335Z,1509054231.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:51.703Z,1509054231.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:51.731Z,1509054231.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:52.199Z,1509054232.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:52.256Z,1509054232.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:52.568Z,1509054232.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:52.641Z,1509054232.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:53.032Z,1509054233.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:53.065Z,1509054233.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:53.391Z,1509054233.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:53.432Z,1509054233.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:53.790Z,1509054233.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:53.807Z,1509054233.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:54.189Z,1509054234.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:54.223Z,1509054234.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:54.592Z,1509054234.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:54.624Z,1509054234.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:55.048Z,1509054235.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:55.125Z,1509054235.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:55.378Z,1509054235.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:55.419Z,1509054235.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:55.780Z,1509054235.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:55.812Z,1509054235.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:56.192Z,1509054236.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:56.198Z,1509054236.198 [PNI_TCM](ERROR): CRC does not match. Expected:0x20682 got:0x36635
2017-10-26T21:43:56.230Z,1509054236.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:56.603Z,1509054236.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:56.633Z,1509054236.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:57.010Z,1509054237.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:57.055Z,1509054237.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:57.370Z,1509054237.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:57.420Z,1509054237.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:57.784Z,1509054237.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:57.816Z,1509054237.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:58.196Z,1509054238.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:58.221Z,1509054238.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:58.599Z,1509054238.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:58.630Z,1509054238.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:59.029Z,1509054239.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:59.086Z,1509054239.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:59.394Z,1509054239.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:59.418Z,1509054239.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:43:59.803Z,1509054239.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:43:59.824Z,1509054239.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:00.205Z,1509054240.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:00.238Z,1509054240.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:00.604Z,1509054240.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:00.648Z,1509054240.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:01.011Z,1509054241.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:01.060Z,1509054241.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:01.389Z,1509054241.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:01.418Z,1509054241.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:01.792Z,1509054241.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:01.824Z,1509054241.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:02.195Z,1509054242.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:02.220Z,1509054242.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:02.586Z,1509054242.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:02.627Z,1509054242.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:03.020Z,1509054243.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:03.087Z,1509054243.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:03.390Z,1509054243.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:03.442Z,1509054243.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:03.777Z,1509054243.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:03.796Z,1509054243.796 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T21:44:03.796Z,1509054243.796 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:44:03.796Z,1509054243.796 [BPC1](ERROR): Data Fault
2017-10-26T21:44:03.836Z,1509054243.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:03.933Z,1509054243.933 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:44:04.188Z,1509054244.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:04.223Z,1509054244.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:04.588Z,1509054244.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:04.628Z,1509054244.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:05.031Z,1509054245.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:05.052Z,1509054245.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:05.187Z,1509054245.187 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:44:05.187Z,1509054245.187 [BPC1] No Fault, FailCount= 1
2017-10-26T21:44:05.398Z,1509054245.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:05.481Z,1509054245.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:05.789Z,1509054245.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:05.805Z,1509054245.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:06.190Z,1509054246.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:06.262Z,1509054246.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:06.592Z,1509054246.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:06.615Z,1509054246.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:07.025Z,1509054247.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:07.072Z,1509054247.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:07.392Z,1509054247.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:07.417Z,1509054247.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:07.788Z,1509054247.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:07.820Z,1509054247.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:08.197Z,1509054248.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:08.216Z,1509054248.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:08.583Z,1509054248.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:08.608Z,1509054248.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:09.002Z,1509054249.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:09.060Z,1509054249.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:09.389Z,1509054249.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:09.414Z,1509054249.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:09.786Z,1509054249.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:09.819Z,1509054249.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:10.209Z,1509054250.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:10.237Z,1509054250.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:10.573Z,1509054250.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:10.615Z,1509054250.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:11.001Z,1509054251.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:11.034Z,1509054251.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:11.392Z,1509054251.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:11.421Z,1509054251.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:11.821Z,1509054251.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:11.856Z,1509054251.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:12.194Z,1509054252.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:12.242Z,1509054252.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:12.598Z,1509054252.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:12.630Z,1509054252.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:12.998Z,1509054252.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:13.038Z,1509054253.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:13.393Z,1509054253.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:13.412Z,1509054253.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:13.799Z,1509054253.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:13.824Z,1509054253.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:14.204Z,1509054254.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:14.242Z,1509054254.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:14.579Z,1509054254.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:14.619Z,1509054254.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:15.026Z,1509054255.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:15.071Z,1509054255.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:15.346Z,1509054255.346 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:44:15.408Z,1509054255.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:15.436Z,1509054255.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:15.815Z,1509054255.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:15.848Z,1509054255.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:16.194Z,1509054256.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:16.233Z,1509054256.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:16.583Z,1509054256.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:16.623Z,1509054256.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:17.017Z,1509054257.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:17.054Z,1509054257.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:17.415Z,1509054257.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:17.460Z,1509054257.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:17.791Z,1509054257.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:17.823Z,1509054257.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:18.182Z,1509054258.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:18.296Z,1509054258.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:18.590Z,1509054258.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:18.615Z,1509054258.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:18.999Z,1509054258.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:19.038Z,1509054259.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:19.393Z,1509054259.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:19.434Z,1509054259.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:19.773Z,1509054259.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:19.843Z,1509054259.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:20.207Z,1509054260.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:20.267Z,1509054260.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:20.585Z,1509054260.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:20.615Z,1509054260.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:21.020Z,1509054261.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:21.073Z,1509054261.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:21.400Z,1509054261.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:21.433Z,1509054261.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:21.532Z,1509054261.532 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T21:44:21.791Z,1509054261.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:21.808Z,1509054261.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:22.194Z,1509054262.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:22.219Z,1509054262.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:22.603Z,1509054262.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:22.628Z,1509054262.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:23.028Z,1509054263.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:23.068Z,1509054263.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:23.407Z,1509054263.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:23.427Z,1509054263.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:23.787Z,1509054263.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:23.811Z,1509054263.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:24.194Z,1509054264.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:24.211Z,1509054264.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:24.583Z,1509054264.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:24.625Z,1509054264.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:24.995Z,1509054264.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:25.037Z,1509054265.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:25.392Z,1509054265.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:25.431Z,1509054265.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:25.796Z,1509054265.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:25.833Z,1509054265.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:26.182Z,1509054266.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:26.210Z,1509054266.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:26.592Z,1509054266.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:26.617Z,1509054266.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:26.994Z,1509054266.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:27.025Z,1509054267.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:27.376Z,1509054267.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:27.418Z,1509054267.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:27.785Z,1509054267.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:27.813Z,1509054267.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:28.209Z,1509054268.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:28.243Z,1509054268.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:28.616Z,1509054268.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:28.648Z,1509054268.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:29.035Z,1509054269.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:29.087Z,1509054269.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:29.398Z,1509054269.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:29.431Z,1509054269.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:29.774Z,1509054269.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:29.817Z,1509054269.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:30.203Z,1509054270.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:30.219Z,1509054270.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:30.602Z,1509054270.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:30.619Z,1509054270.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:30.984Z,1509054270.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:31.029Z,1509054271.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:31.387Z,1509054271.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:31.416Z,1509054271.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:31.799Z,1509054271.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:31.828Z,1509054271.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:32.200Z,1509054272.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:32.288Z,1509054272.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:32.610Z,1509054272.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:32.650Z,1509054272.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:33.034Z,1509054273.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:33.075Z,1509054273.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:33.402Z,1509054273.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:33.452Z,1509054273.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:33.796Z,1509054273.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:33.831Z,1509054273.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:34.208Z,1509054274.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:34.262Z,1509054274.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:34.584Z,1509054274.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:34.650Z,1509054274.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:35.027Z,1509054275.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:35.076Z,1509054275.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:35.396Z,1509054275.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:35.433Z,1509054275.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:35.774Z,1509054275.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:35.822Z,1509054275.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:36.190Z,1509054276.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:36.243Z,1509054276.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:36.587Z,1509054276.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:36.629Z,1509054276.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:37.016Z,1509054277.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:37.032Z,1509054277.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:37.381Z,1509054277.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:37.430Z,1509054277.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:37.786Z,1509054277.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:37.793Z,1509054277.793 [PNI_TCM](ERROR): CRC does not match. Expected:0x1550 got:0x16829
2017-10-26T21:44:37.823Z,1509054277.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:38.202Z,1509054278.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:38.240Z,1509054278.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:38.587Z,1509054278.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:38.607Z,1509054278.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:39.025Z,1509054279.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:39.076Z,1509054279.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:39.389Z,1509054279.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:39.418Z,1509054279.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:39.778Z,1509054279.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:39.834Z,1509054279.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:40.198Z,1509054280.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:40.214Z,1509054280.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:40.602Z,1509054280.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:40.634Z,1509054280.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:41.001Z,1509054281.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:41.028Z,1509054281.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:41.396Z,1509054281.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:41.412Z,1509054281.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:41.785Z,1509054281.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:41.809Z,1509054281.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:42.197Z,1509054282.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:42.226Z,1509054282.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:42.593Z,1509054282.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:42.609Z,1509054282.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:42.991Z,1509054282.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:43.028Z,1509054283.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:43.396Z,1509054283.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:43.413Z,1509054283.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:43.777Z,1509054283.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:43.812Z,1509054283.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:44.186Z,1509054284.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:44.240Z,1509054284.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.428865 seconds old.
2017-10-26T21:44:44.241Z,1509054284.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:44.247Z,1509054284.247 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.433578 seconds old.
2017-10-26T21:44:44.249Z,1509054284.249 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.433772 seconds old.
2017-10-26T21:44:44.577Z,1509054284.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:44.604Z,1509054284.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.792931 seconds old.
2017-10-26T21:44:44.605Z,1509054284.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:44.611Z,1509054284.611 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.793331 seconds old.
2017-10-26T21:44:44.613Z,1509054284.613 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.797838 seconds old.
2017-10-26T21:44:45.002Z,1509054285.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:45.043Z,1509054285.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.231309 seconds old.
2017-10-26T21:44:45.044Z,1509054285.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:45.045Z,1509054285.045 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.232015 seconds old.
2017-10-26T21:44:45.047Z,1509054285.047 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.232215 seconds old.
2017-10-26T21:44:45.400Z,1509054285.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:45.439Z,1509054285.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.627624 seconds old.
2017-10-26T21:44:45.448Z,1509054285.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:45.449Z,1509054285.449 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.636343 seconds old.
2017-10-26T21:44:45.460Z,1509054285.460 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.636537 seconds old.
2017-10-26T21:44:45.798Z,1509054285.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:45.839Z,1509054285.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.027746 seconds old.
2017-10-26T21:44:45.841Z,1509054285.841 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:45.841Z,1509054285.841 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 39
2017-10-26T21:44:45.841Z,1509054285.841 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:44:45.843Z,1509054285.843 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.029952 seconds old.
2017-10-26T21:44:45.846Z,1509054285.846 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.030752 seconds old.
2017-10-26T21:44:45.847Z,1509054285.847 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:45.847Z,1509054285.847 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 39
2017-10-26T21:44:45.847Z,1509054285.847 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:44:45.915Z,1509054285.915 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:44:45.915Z,1509054285.915 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:44:46.200Z,1509054286.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:46.231Z,1509054286.231 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.418355 seconds old.
2017-10-26T21:44:46.283Z,1509054286.283 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:44:46.283Z,1509054286.283 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 39
2017-10-26T21:44:46.284Z,1509054286.284 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:44:46.284Z,1509054286.284 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 39
2017-10-26T21:44:46.584Z,1509054286.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:46.641Z,1509054286.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:44:46.641Z,1509054286.641 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:44:46.641Z,1509054286.641 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:44:46.642Z,1509054286.642 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.829196 seconds old.
2017-10-26T21:44:46.644Z,1509054286.644 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:44:46.645Z,1509054286.645 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:44:46.645Z,1509054286.645 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:44:46.984Z,1509054286.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:47.039Z,1509054287.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.227611 seconds old.
2017-10-26T21:44:47.040Z,1509054287.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:47.041Z,1509054287.041 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.228111 seconds old.
2017-10-26T21:44:47.052Z,1509054287.052 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.236624 seconds old.
2017-10-26T21:44:47.389Z,1509054287.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:47.421Z,1509054287.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.609602 seconds old.
2017-10-26T21:44:47.422Z,1509054287.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:47.427Z,1509054287.427 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.614314 seconds old.
2017-10-26T21:44:47.430Z,1509054287.430 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.614508 seconds old.
2017-10-26T21:44:47.803Z,1509054287.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:47.859Z,1509054287.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.047980 seconds old.
2017-10-26T21:44:47.861Z,1509054287.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:47.862Z,1509054287.862 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.049286 seconds old.
2017-10-26T21:44:47.866Z,1509054287.866 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.050586 seconds old.
2017-10-26T21:44:48.205Z,1509054288.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:48.219Z,1509054288.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.408039 seconds old.
2017-10-26T21:44:48.221Z,1509054288.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:48.222Z,1509054288.222 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.408745 seconds old.
2017-10-26T21:44:48.224Z,1509054288.224 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.408939 seconds old.
2017-10-26T21:44:48.604Z,1509054288.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:48.652Z,1509054288.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 4.840611 seconds old.
2017-10-26T21:44:48.653Z,1509054288.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:48.654Z,1509054288.654 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 4.841317 seconds old.
2017-10-26T21:44:48.657Z,1509054288.657 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 4.841511 seconds old.
2017-10-26T21:44:49.007Z,1509054289.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:49.050Z,1509054289.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.239232 seconds old.
2017-10-26T21:44:49.052Z,1509054289.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:49.053Z,1509054289.053 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.239632 seconds old.
2017-10-26T21:44:49.055Z,1509054289.055 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.239932 seconds old.
2017-10-26T21:44:49.413Z,1509054289.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:49.436Z,1509054289.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 5.624729 seconds old.
2017-10-26T21:44:49.437Z,1509054289.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:49.462Z,1509054289.462 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 5.649273 seconds old.
2017-10-26T21:44:49.465Z,1509054289.465 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 5.649567 seconds old.
2017-10-26T21:44:49.789Z,1509054289.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:49.813Z,1509054289.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.001914 seconds old.
2017-10-26T21:44:49.815Z,1509054289.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:49.816Z,1509054289.816 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.002720 seconds old.
2017-10-26T21:44:49.818Z,1509054289.818 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.002814 seconds old.
2017-10-26T21:44:50.198Z,1509054290.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:50.220Z,1509054290.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.408748 seconds old.
2017-10-26T21:44:50.221Z,1509054290.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:50.222Z,1509054290.222 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.409148 seconds old.
2017-10-26T21:44:50.225Z,1509054290.225 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.409448 seconds old.
2017-10-26T21:44:50.601Z,1509054290.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:50.623Z,1509054290.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 6.812269 seconds old.
2017-10-26T21:44:50.625Z,1509054290.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:50.626Z,1509054290.626 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 6.813076 seconds old.
2017-10-26T21:44:50.629Z,1509054290.629 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 6.813476 seconds old.
2017-10-26T21:44:51.025Z,1509054291.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:51.056Z,1509054291.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.244541 seconds old.
2017-10-26T21:44:51.081Z,1509054291.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:51.082Z,1509054291.082 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.269384 seconds old.
2017-10-26T21:44:51.085Z,1509054291.085 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.269785 seconds old.
2017-10-26T21:44:51.397Z,1509054291.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:51.412Z,1509054291.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.600694 seconds old.
2017-10-26T21:44:51.414Z,1509054291.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:51.415Z,1509054291.415 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.601700 seconds old.
2017-10-26T21:44:51.417Z,1509054291.417 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 7.601894 seconds old.
2017-10-26T21:44:51.796Z,1509054291.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:51.811Z,1509054291.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 7.999516 seconds old.
2017-10-26T21:44:51.812Z,1509054291.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:51.813Z,1509054291.813 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 7.999916 seconds old.
2017-10-26T21:44:51.816Z,1509054291.816 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.000516 seconds old.
2017-10-26T21:44:52.204Z,1509054292.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:52.228Z,1509054292.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.417163 seconds old.
2017-10-26T21:44:52.230Z,1509054292.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:52.239Z,1509054292.239 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.425881 seconds old.
2017-10-26T21:44:52.241Z,1509054292.241 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.426075 seconds old.
2017-10-26T21:44:52.577Z,1509054292.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:52.605Z,1509054292.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 8.793247 seconds old.
2017-10-26T21:44:52.606Z,1509054292.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:52.607Z,1509054292.607 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 8.793747 seconds old.
2017-10-26T21:44:52.609Z,1509054292.609 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 8.794147 seconds old.
2017-10-26T21:44:53.005Z,1509054293.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:53.036Z,1509054293.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.224818 seconds old.
2017-10-26T21:44:53.037Z,1509054293.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:53.038Z,1509054293.038 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.225318 seconds old.
2017-10-26T21:44:53.049Z,1509054293.049 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.234031 seconds old.
2017-10-26T21:44:53.398Z,1509054293.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:53.418Z,1509054293.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 9.606709 seconds old.
2017-10-26T21:44:53.419Z,1509054293.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:53.436Z,1509054293.436 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 9.607109 seconds old.
2017-10-26T21:44:53.439Z,1509054293.439 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 9.623634 seconds old.
2017-10-26T21:44:53.772Z,1509054293.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:53.813Z,1509054293.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.001725 seconds old.
2017-10-26T21:44:53.814Z,1509054293.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:53.815Z,1509054293.815 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.002325 seconds old.
2017-10-26T21:44:53.822Z,1509054293.822 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.006831 seconds old.
2017-10-26T21:44:54.195Z,1509054294.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:54.222Z,1509054294.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.410659 seconds old.
2017-10-26T21:44:54.223Z,1509054294.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:54.224Z,1509054294.224 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.411159 seconds old.
2017-10-26T21:44:54.231Z,1509054294.231 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.415765 seconds old.
2017-10-26T21:44:54.594Z,1509054294.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:54.617Z,1509054294.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 10.805268 seconds old.
2017-10-26T21:44:54.618Z,1509054294.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:54.619Z,1509054294.619 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 10.806074 seconds old.
2017-10-26T21:44:54.622Z,1509054294.622 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 10.806368 seconds old.
2017-10-26T21:44:54.988Z,1509054294.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:55.053Z,1509054295.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.241546 seconds old.
2017-10-26T21:44:55.054Z,1509054295.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:55.055Z,1509054295.055 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.242252 seconds old.
2017-10-26T21:44:55.058Z,1509054295.058 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.242446 seconds old.
2017-10-26T21:44:55.388Z,1509054295.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:55.410Z,1509054295.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 11.599099 seconds old.
2017-10-26T21:44:55.416Z,1509054295.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:55.417Z,1509054295.417 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 11.603811 seconds old.
2017-10-26T21:44:55.424Z,1509054295.424 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 11.604105 seconds old.
2017-10-26T21:44:55.797Z,1509054295.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:55.812Z,1509054295.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 12.001127 seconds old.
2017-10-26T21:44:55.814Z,1509054295.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:55.815Z,1509054295.815 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.001627 seconds old.
2017-10-26T21:44:55.817Z,1509054295.817 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.002027 seconds old.
2017-10-26T21:44:56.196Z,1509054296.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:56.216Z,1509054296.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 12.404949 seconds old.
2017-10-26T21:44:56.218Z,1509054296.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:56.219Z,1509054296.219 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.405655 seconds old.
2017-10-26T21:44:56.221Z,1509054296.221 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.406155 seconds old.
2017-10-26T21:44:56.572Z,1509054296.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:56.615Z,1509054296.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 12.803570 seconds old.
2017-10-26T21:44:56.616Z,1509054296.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:56.622Z,1509054296.622 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 12.804070 seconds old.
2017-10-26T21:44:56.624Z,1509054296.624 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 12.808777 seconds old.
2017-10-26T21:44:57.010Z,1509054297.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:57.064Z,1509054297.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:57.390Z,1509054297.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:57.417Z,1509054297.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:57.793Z,1509054297.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:57.818Z,1509054297.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:58.199Z,1509054298.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:58.225Z,1509054298.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:58.593Z,1509054298.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:58.641Z,1509054298.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:59.015Z,1509054299.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:59.061Z,1509054299.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:59.393Z,1509054299.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:59.418Z,1509054299.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:44:59.797Z,1509054299.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:44:59.849Z,1509054299.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:00.198Z,1509054300.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:00.222Z,1509054300.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:00.578Z,1509054300.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:00.608Z,1509054300.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:01.025Z,1509054301.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:01.111Z,1509054301.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:01.379Z,1509054301.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:01.420Z,1509054301.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:01.787Z,1509054301.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:01.794Z,1509054301.794 [PNI_TCM](ERROR): CRC does not match. Expected:0x38714 got:0x6336
2017-10-26T21:45:01.825Z,1509054301.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:02.197Z,1509054302.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:02.261Z,1509054302.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:02.607Z,1509054302.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:02.629Z,1509054302.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:03.009Z,1509054303.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:03.059Z,1509054303.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:03.391Z,1509054303.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:03.460Z,1509054303.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:03.792Z,1509054303.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:03.816Z,1509054303.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:04.217Z,1509054304.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:04.233Z,1509054304.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:04.582Z,1509054304.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:04.618Z,1509054304.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:04.992Z,1509054304.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:05.035Z,1509054305.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:05.393Z,1509054305.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:05.435Z,1509054305.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:05.800Z,1509054305.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:05.832Z,1509054305.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:06.279Z,1509054306.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:06.316Z,1509054306.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:06.593Z,1509054306.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:06.621Z,1509054306.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:07.048Z,1509054307.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:07.080Z,1509054307.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:07.406Z,1509054307.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:07.439Z,1509054307.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:07.817Z,1509054307.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:07.862Z,1509054307.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:08.422Z,1509054308.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:08.438Z,1509054308.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:08.820Z,1509054308.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:08.837Z,1509054308.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:09.224Z,1509054309.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:09.254Z,1509054309.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:09.615Z,1509054309.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:09.640Z,1509054309.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:10.016Z,1509054310.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:10.057Z,1509054310.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:10.416Z,1509054310.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:10.433Z,1509054310.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:10.815Z,1509054310.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:10.831Z,1509054310.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:11.221Z,1509054311.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:11.243Z,1509054311.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:11.610Z,1509054311.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:11.642Z,1509054311.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:12.019Z,1509054312.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:12.036Z,1509054312.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:12.416Z,1509054312.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:12.471Z,1509054312.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:12.817Z,1509054312.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:12.857Z,1509054312.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:13.218Z,1509054313.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:13.251Z,1509054313.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:13.624Z,1509054313.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:13.686Z,1509054313.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:14.015Z,1509054314.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:14.043Z,1509054314.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:14.437Z,1509054314.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:14.456Z,1509054314.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:14.816Z,1509054314.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:14.844Z,1509054314.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:15.223Z,1509054315.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:15.245Z,1509054315.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:15.596Z,1509054315.596 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:45:15.625Z,1509054315.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:15.682Z,1509054315.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:16.020Z,1509054316.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:16.044Z,1509054316.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:16.428Z,1509054316.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:16.484Z,1509054316.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:16.823Z,1509054316.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:16.849Z,1509054316.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:17.217Z,1509054317.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:17.265Z,1509054317.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:17.619Z,1509054317.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:17.669Z,1509054317.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:18.022Z,1509054318.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:18.064Z,1509054318.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:18.412Z,1509054318.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:18.450Z,1509054318.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:18.823Z,1509054318.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:18.840Z,1509054318.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:19.215Z,1509054319.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:19.239Z,1509054319.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:19.614Z,1509054319.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:19.636Z,1509054319.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:20.020Z,1509054320.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:20.047Z,1509054320.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:20.550Z,1509054320.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:20.586Z,1509054320.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:20.983Z,1509054320.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:21.034Z,1509054321.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:21.361Z,1509054321.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:21.418Z,1509054321.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:21.747Z,1509054321.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:21.811Z,1509054321.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:22.147Z,1509054322.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:22.214Z,1509054322.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:22.548Z,1509054322.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:22.594Z,1509054322.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:23.020Z,1509054323.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:23.068Z,1509054323.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:23.380Z,1509054323.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:23.414Z,1509054323.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:23.744Z,1509054323.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:23.810Z,1509054323.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:24.152Z,1509054324.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:24.222Z,1509054324.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:24.549Z,1509054324.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:24.609Z,1509054324.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:24.998Z,1509054324.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:25.044Z,1509054325.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:25.351Z,1509054325.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:25.409Z,1509054325.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:25.751Z,1509054325.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:25.788Z,1509054325.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:26.183Z,1509054326.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:26.211Z,1509054326.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:26.551Z,1509054326.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:26.594Z,1509054326.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:27.024Z,1509054327.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:27.061Z,1509054327.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:27.351Z,1509054327.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:27.399Z,1509054327.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:27.747Z,1509054327.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:27.763Z,1509054327.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:28.180Z,1509054328.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:28.217Z,1509054328.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:28.562Z,1509054328.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:28.622Z,1509054328.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:28.981Z,1509054328.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:29.047Z,1509054329.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:29.351Z,1509054329.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:29.397Z,1509054329.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:29.764Z,1509054329.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:29.825Z,1509054329.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:30.168Z,1509054330.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:30.217Z,1509054330.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:30.574Z,1509054330.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:30.623Z,1509054330.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:30.994Z,1509054330.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:31.077Z,1509054331.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:31.352Z,1509054331.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:31.390Z,1509054331.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:31.750Z,1509054331.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:31.810Z,1509054331.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:32.183Z,1509054332.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:32.240Z,1509054332.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:32.559Z,1509054332.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:32.612Z,1509054332.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:32.959Z,1509054332.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:32.976Z,1509054332.976 [PNI_TCM](ERROR): CRC does not match. Expected:0x57116 got:0x18893
2017-10-26T21:45:33.082Z,1509054333.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:33.344Z,1509054333.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:33.410Z,1509054333.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:33.746Z,1509054333.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:33.785Z,1509054333.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:34.186Z,1509054334.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:34.215Z,1509054334.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:34.560Z,1509054334.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:34.582Z,1509054334.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:34.963Z,1509054334.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:35.005Z,1509054335.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:35.362Z,1509054335.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:35.423Z,1509054335.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:35.746Z,1509054335.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:35.801Z,1509054335.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:36.175Z,1509054336.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:36.205Z,1509054336.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:36.543Z,1509054336.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:36.601Z,1509054336.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:36.957Z,1509054336.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:37.015Z,1509054337.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:37.355Z,1509054337.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:37.398Z,1509054337.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:37.749Z,1509054337.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:37.780Z,1509054337.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:38.164Z,1509054338.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:38.207Z,1509054338.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:38.561Z,1509054338.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:38.608Z,1509054338.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:38.945Z,1509054338.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:38.998Z,1509054338.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:39.348Z,1509054339.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:39.413Z,1509054339.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:39.754Z,1509054339.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:39.802Z,1509054339.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:40.200Z,1509054340.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:40.229Z,1509054340.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:40.545Z,1509054340.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:40.612Z,1509054340.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:41.032Z,1509054341.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:41.073Z,1509054341.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:41.343Z,1509054341.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:41.403Z,1509054341.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:41.750Z,1509054341.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:41.805Z,1509054341.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:42.185Z,1509054342.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:42.209Z,1509054342.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:42.559Z,1509054342.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:42.615Z,1509054342.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:42.979Z,1509054342.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:43.045Z,1509054343.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:43.348Z,1509054343.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:43.397Z,1509054343.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:43.752Z,1509054343.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:43.793Z,1509054343.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:44.187Z,1509054344.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:44.258Z,1509054344.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:44.556Z,1509054344.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:44.607Z,1509054344.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:44.987Z,1509054344.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:45.037Z,1509054345.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:45.343Z,1509054345.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:45.428Z,1509054345.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:45.747Z,1509054345.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:45.794Z,1509054345.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:46.176Z,1509054346.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:46.218Z,1509054346.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:46.561Z,1509054346.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:46.613Z,1509054346.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:46.986Z,1509054346.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:47.038Z,1509054347.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:47.354Z,1509054347.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:47.398Z,1509054347.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:47.745Z,1509054347.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:47.796Z,1509054347.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:48.172Z,1509054348.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:48.203Z,1509054348.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:48.561Z,1509054348.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:48.587Z,1509054348.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:48.988Z,1509054348.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:49.050Z,1509054349.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:49.352Z,1509054349.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:49.411Z,1509054349.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:49.750Z,1509054349.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:49.792Z,1509054349.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:50.294Z,1509054350.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:50.310Z,1509054350.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:50.689Z,1509054350.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:50.706Z,1509054350.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:51.104Z,1509054351.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:51.164Z,1509054351.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:51.482Z,1509054351.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:51.519Z,1509054351.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:51.893Z,1509054351.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:51.926Z,1509054351.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:52.295Z,1509054352.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:52.335Z,1509054352.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:52.688Z,1509054352.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:52.703Z,1509054352.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:53.089Z,1509054353.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:53.105Z,1509054353.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:53.484Z,1509054353.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:53.508Z,1509054353.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:53.893Z,1509054353.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:53.929Z,1509054353.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:54.293Z,1509054354.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:54.330Z,1509054354.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:54.690Z,1509054354.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:54.705Z,1509054354.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:55.106Z,1509054355.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:55.195Z,1509054355.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:55.489Z,1509054355.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:55.505Z,1509054355.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:55.889Z,1509054355.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:55.906Z,1509054355.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:56.295Z,1509054356.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:56.311Z,1509054356.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:56.695Z,1509054356.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:56.712Z,1509054356.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:57.105Z,1509054357.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:57.174Z,1509054357.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:57.509Z,1509054357.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:57.525Z,1509054357.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:57.887Z,1509054357.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:57.922Z,1509054357.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:58.281Z,1509054358.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:58.320Z,1509054358.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:58.685Z,1509054358.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:58.756Z,1509054358.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:59.085Z,1509054359.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:59.126Z,1509054359.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:59.505Z,1509054359.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:59.556Z,1509054359.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:45:59.877Z,1509054359.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:45:59.915Z,1509054359.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:00.278Z,1509054360.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:00.326Z,1509054360.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:00.683Z,1509054360.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:00.732Z,1509054360.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:01.091Z,1509054361.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:01.162Z,1509054361.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:01.492Z,1509054361.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:01.513Z,1509054361.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:01.887Z,1509054361.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:01.923Z,1509054361.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:02.286Z,1509054362.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:02.322Z,1509054362.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:02.680Z,1509054362.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:02.697Z,1509054362.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:03.198Z,1509054363.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:03.229Z,1509054363.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:03.575Z,1509054363.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:03.592Z,1509054363.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:03.963Z,1509054363.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:03.988Z,1509054363.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:04.379Z,1509054364.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:04.395Z,1509054364.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:04.767Z,1509054364.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:04.799Z,1509054364.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:05.199Z,1509054365.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:05.221Z,1509054365.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:05.571Z,1509054365.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:05.600Z,1509054365.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:05.967Z,1509054365.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:05.984Z,1509054365.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:06.371Z,1509054366.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:06.388Z,1509054366.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:06.768Z,1509054366.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:06.784Z,1509054366.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:07.173Z,1509054367.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:07.226Z,1509054367.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:07.580Z,1509054367.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:07.597Z,1509054367.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:07.980Z,1509054367.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:07.997Z,1509054367.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:08.359Z,1509054368.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:08.396Z,1509054368.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:08.767Z,1509054368.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:08.796Z,1509054368.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:09.172Z,1509054369.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:09.205Z,1509054369.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:09.572Z,1509054369.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:09.596Z,1509054369.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:09.973Z,1509054369.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:09.990Z,1509054369.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:10.373Z,1509054370.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:10.389Z,1509054370.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:10.777Z,1509054370.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:10.820Z,1509054370.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:11.180Z,1509054371.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:11.196Z,1509054371.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:11.568Z,1509054371.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:11.626Z,1509054371.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:12.002Z,1509054372.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:12.022Z,1509054372.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:12.377Z,1509054372.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:12.398Z,1509054372.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:12.776Z,1509054372.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:12.799Z,1509054372.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:13.179Z,1509054373.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:13.235Z,1509054373.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:13.559Z,1509054373.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:13.692Z,1509054373.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:13.976Z,1509054373.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:14.007Z,1509054374.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:14.377Z,1509054374.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:14.433Z,1509054374.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:14.770Z,1509054374.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:14.786Z,1509054374.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:15.175Z,1509054375.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:15.226Z,1509054375.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:15.602Z,1509054375.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:15.691Z,1509054375.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:15.941Z,1509054375.941 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:46:15.980Z,1509054375.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:15.997Z,1509054375.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:16.383Z,1509054376.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:16.409Z,1509054376.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:16.777Z,1509054376.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:16.794Z,1509054376.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:17.189Z,1509054377.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:17.205Z,1509054377.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:17.580Z,1509054377.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:17.613Z,1509054377.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:17.966Z,1509054377.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:18.004Z,1509054378.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:18.366Z,1509054378.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:18.413Z,1509054378.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:18.775Z,1509054378.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:18.807Z,1509054378.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:19.168Z,1509054379.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:19.198Z,1509054379.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:19.577Z,1509054379.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:19.597Z,1509054379.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:19.977Z,1509054379.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:19.994Z,1509054379.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:20.361Z,1509054380.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:20.389Z,1509054380.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:20.766Z,1509054380.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:20.801Z,1509054380.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:21.173Z,1509054381.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:21.209Z,1509054381.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:21.566Z,1509054381.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:21.594Z,1509054381.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:21.965Z,1509054381.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:21.981Z,1509054381.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:22.373Z,1509054382.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:22.389Z,1509054382.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:22.769Z,1509054382.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:22.786Z,1509054382.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:23.189Z,1509054383.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:23.222Z,1509054383.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:23.580Z,1509054383.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:23.598Z,1509054383.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:23.971Z,1509054383.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:23.988Z,1509054383.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:24.367Z,1509054384.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:24.395Z,1509054384.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:24.775Z,1509054384.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:24.800Z,1509054384.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:25.184Z,1509054385.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:25.212Z,1509054385.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:25.574Z,1509054385.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:25.608Z,1509054385.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:25.964Z,1509054385.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:25.980Z,1509054385.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:26.370Z,1509054386.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:26.417Z,1509054386.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:26.770Z,1509054386.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:26.786Z,1509054386.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:27.180Z,1509054387.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:27.197Z,1509054387.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:27.579Z,1509054387.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:27.600Z,1509054387.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:27.976Z,1509054387.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:28.034Z,1509054388.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:28.361Z,1509054388.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:28.399Z,1509054388.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:28.766Z,1509054388.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:28.805Z,1509054388.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:29.175Z,1509054389.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:29.231Z,1509054389.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:29.565Z,1509054389.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:29.601Z,1509054389.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:29.984Z,1509054389.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:30.037Z,1509054390.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:30.369Z,1509054390.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:30.426Z,1509054390.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:30.778Z,1509054390.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:30.794Z,1509054390.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:31.180Z,1509054391.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:31.197Z,1509054391.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:31.575Z,1509054391.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:31.596Z,1509054391.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:31.959Z,1509054391.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:31.995Z,1509054391.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:32.364Z,1509054392.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:32.396Z,1509054392.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:32.769Z,1509054392.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:32.801Z,1509054392.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:33.176Z,1509054393.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:33.193Z,1509054393.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:33.572Z,1509054393.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:33.595Z,1509054393.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:33.976Z,1509054393.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:33.993Z,1509054393.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:34.377Z,1509054394.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:34.394Z,1509054394.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:34.783Z,1509054394.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:34.800Z,1509054394.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:35.182Z,1509054395.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:35.198Z,1509054395.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:35.563Z,1509054395.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:35.615Z,1509054395.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:35.966Z,1509054395.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:36.001Z,1509054396.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:36.371Z,1509054396.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:36.399Z,1509054396.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:36.767Z,1509054396.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:36.814Z,1509054396.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:37.175Z,1509054397.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:37.201Z,1509054397.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:37.576Z,1509054397.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:37.613Z,1509054397.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:37.963Z,1509054397.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:37.979Z,1509054397.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:38.372Z,1509054398.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:38.410Z,1509054398.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:38.767Z,1509054398.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:38.804Z,1509054398.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:39.187Z,1509054399.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:39.203Z,1509054399.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:39.574Z,1509054399.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:39.590Z,1509054399.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:39.970Z,1509054399.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:39.991Z,1509054399.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:40.381Z,1509054400.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:40.398Z,1509054400.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:40.776Z,1509054400.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:40.797Z,1509054400.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:41.192Z,1509054401.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:41.251Z,1509054401.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:41.567Z,1509054401.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:41.587Z,1509054401.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:41.966Z,1509054401.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:41.982Z,1509054401.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:42.375Z,1509054402.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:42.397Z,1509054402.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:42.772Z,1509054402.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:42.830Z,1509054402.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:43.172Z,1509054403.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:43.209Z,1509054403.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:43.585Z,1509054403.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:43.638Z,1509054403.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:43.975Z,1509054403.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:43.991Z,1509054403.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:44.372Z,1509054404.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:44.431Z,1509054404.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:44.772Z,1509054404.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:44.824Z,1509054404.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:45.180Z,1509054405.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:45.205Z,1509054405.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:45.572Z,1509054405.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:45.608Z,1509054405.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:45.976Z,1509054405.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:46.019Z,1509054406.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:46.374Z,1509054406.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:46.416Z,1509054406.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:46.770Z,1509054406.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:46.786Z,1509054406.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:47.181Z,1509054407.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:47.204Z,1509054407.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:47.578Z,1509054407.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:47.594Z,1509054407.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:47.997Z,1509054407.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:48.021Z,1509054408.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:48.369Z,1509054408.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:48.398Z,1509054408.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:48.778Z,1509054408.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:48.803Z,1509054408.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:49.189Z,1509054409.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:49.217Z,1509054409.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:49.586Z,1509054409.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:49.603Z,1509054409.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:49.966Z,1509054409.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:49.994Z,1509054409.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:50.367Z,1509054410.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:50.383Z,1509054410.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:50.766Z,1509054410.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:50.782Z,1509054410.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:51.179Z,1509054411.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:51.212Z,1509054411.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:51.572Z,1509054411.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:51.588Z,1509054411.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:51.973Z,1509054411.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:51.989Z,1509054411.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:52.373Z,1509054412.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:52.394Z,1509054412.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:52.764Z,1509054412.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:52.799Z,1509054412.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:53.181Z,1509054413.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:53.198Z,1509054413.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:53.561Z,1509054413.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:53.597Z,1509054413.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:53.963Z,1509054413.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:54.003Z,1509054414.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:54.366Z,1509054414.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:54.399Z,1509054414.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:54.772Z,1509054414.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:54.801Z,1509054414.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:55.185Z,1509054415.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:55.210Z,1509054415.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:55.577Z,1509054415.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:55.637Z,1509054415.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:55.972Z,1509054415.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:55.992Z,1509054415.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:56.361Z,1509054416.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:56.397Z,1509054416.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:56.780Z,1509054416.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:56.839Z,1509054416.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:57.180Z,1509054417.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:57.202Z,1509054417.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:57.576Z,1509054417.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:57.593Z,1509054417.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:57.975Z,1509054417.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:58.030Z,1509054418.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:58.360Z,1509054418.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:58.401Z,1509054418.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:58.765Z,1509054418.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:58.839Z,1509054418.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:59.182Z,1509054419.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:59.216Z,1509054419.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:46:59.749Z,1509054419.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:46:59.803Z,1509054419.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:00.200Z,1509054420.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:00.229Z,1509054420.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:00.554Z,1509054420.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:00.601Z,1509054420.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:01.026Z,1509054421.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:01.052Z,1509054421.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:01.352Z,1509054421.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:01.413Z,1509054421.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:01.752Z,1509054421.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:01.791Z,1509054421.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:02.200Z,1509054422.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:02.245Z,1509054422.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:02.591Z,1509054422.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:02.607Z,1509054422.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:03.016Z,1509054423.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:03.061Z,1509054423.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:03.360Z,1509054423.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:03.412Z,1509054423.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:03.769Z,1509054423.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:03.814Z,1509054423.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:04.188Z,1509054424.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:04.231Z,1509054424.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:04.550Z,1509054424.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:04.600Z,1509054424.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:04.986Z,1509054424.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:05.026Z,1509054425.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:05.380Z,1509054425.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:05.404Z,1509054425.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:05.768Z,1509054425.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:05.799Z,1509054425.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:06.169Z,1509054426.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:06.201Z,1509054426.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:06.562Z,1509054426.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:06.601Z,1509054426.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:07.014Z,1509054427.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:07.077Z,1509054427.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:07.377Z,1509054427.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:07.399Z,1509054427.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:07.756Z,1509054427.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:07.798Z,1509054427.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:08.191Z,1509054428.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:08.221Z,1509054428.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:08.565Z,1509054428.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:08.604Z,1509054428.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:09.015Z,1509054429.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:09.039Z,1509054429.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:09.375Z,1509054429.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:09.422Z,1509054429.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:09.767Z,1509054429.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:09.815Z,1509054429.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:10.192Z,1509054430.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:10.222Z,1509054430.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:10.587Z,1509054430.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:10.615Z,1509054430.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:10.983Z,1509054430.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:11.061Z,1509054431.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:11.361Z,1509054431.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:11.409Z,1509054431.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:11.942Z,1509054431.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:11.996Z,1509054431.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:12.337Z,1509054432.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:12.380Z,1509054432.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:12.733Z,1509054432.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:12.803Z,1509054432.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:13.147Z,1509054433.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:13.177Z,1509054433.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:13.539Z,1509054433.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:13.592Z,1509054433.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:13.941Z,1509054433.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:13.957Z,1509054433.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:14.347Z,1509054434.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:14.424Z,1509054434.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:14.736Z,1509054434.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:14.753Z,1509054434.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:15.150Z,1509054435.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:15.186Z,1509054435.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:15.541Z,1509054435.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:15.562Z,1509054435.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:15.941Z,1509054435.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:15.958Z,1509054435.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:16.311Z,1509054436.311 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:47:16.331Z,1509054436.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:16.364Z,1509054436.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:16.733Z,1509054436.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:16.762Z,1509054436.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:17.129Z,1509054437.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:17.170Z,1509054437.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:17.542Z,1509054437.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:17.558Z,1509054437.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:17.939Z,1509054437.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:17.963Z,1509054437.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:18.327Z,1509054438.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:18.364Z,1509054438.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:18.732Z,1509054438.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:18.765Z,1509054438.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:19.138Z,1509054439.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:19.175Z,1509054439.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:19.537Z,1509054439.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:19.576Z,1509054439.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:19.941Z,1509054439.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:19.957Z,1509054439.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:20.339Z,1509054440.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:20.355Z,1509054440.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:20.743Z,1509054440.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:20.759Z,1509054440.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:21.147Z,1509054441.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:21.176Z,1509054441.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:21.560Z,1509054441.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:21.582Z,1509054441.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:21.936Z,1509054441.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:21.960Z,1509054441.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:22.338Z,1509054442.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:22.354Z,1509054442.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:22.731Z,1509054442.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:22.747Z,1509054442.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:23.141Z,1509054443.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:23.182Z,1509054443.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:23.544Z,1509054443.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:23.567Z,1509054443.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:23.942Z,1509054443.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:23.963Z,1509054443.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:24.329Z,1509054444.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:24.357Z,1509054444.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:24.731Z,1509054444.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:24.765Z,1509054444.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:25.176Z,1509054445.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:25.219Z,1509054445.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:25.539Z,1509054445.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:25.574Z,1509054445.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:25.939Z,1509054445.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:25.999Z,1509054445.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:26.341Z,1509054446.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:26.401Z,1509054446.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:26.735Z,1509054446.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:26.752Z,1509054446.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:27.154Z,1509054447.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:27.210Z,1509054447.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:27.533Z,1509054447.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:27.560Z,1509054447.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:27.945Z,1509054447.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:27.999Z,1509054447.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:28.327Z,1509054448.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:28.380Z,1509054448.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:28.755Z,1509054448.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:28.774Z,1509054448.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:29.132Z,1509054449.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:29.182Z,1509054449.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:29.529Z,1509054449.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:29.561Z,1509054449.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:29.931Z,1509054449.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:29.960Z,1509054449.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:30.338Z,1509054450.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:30.355Z,1509054450.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:30.742Z,1509054450.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:30.771Z,1509054450.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:31.133Z,1509054451.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:31.179Z,1509054451.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:31.536Z,1509054451.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:31.564Z,1509054451.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:31.932Z,1509054451.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:31.974Z,1509054451.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:32.334Z,1509054452.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:32.350Z,1509054452.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:32.733Z,1509054452.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:32.754Z,1509054452.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:33.163Z,1509054453.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:33.191Z,1509054453.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:33.538Z,1509054453.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:33.559Z,1509054453.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:33.932Z,1509054453.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:33.964Z,1509054453.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:34.328Z,1509054454.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:34.365Z,1509054454.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:34.733Z,1509054454.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:34.760Z,1509054454.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:35.157Z,1509054455.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:35.174Z,1509054455.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:35.530Z,1509054455.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:35.567Z,1509054455.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:35.931Z,1509054455.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:35.970Z,1509054455.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:36.331Z,1509054456.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:36.364Z,1509054456.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:36.732Z,1509054456.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:36.764Z,1509054456.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:37.145Z,1509054457.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:37.177Z,1509054457.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:37.537Z,1509054457.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:37.580Z,1509054457.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:37.931Z,1509054457.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:37.963Z,1509054457.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:38.334Z,1509054458.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:38.350Z,1509054458.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:38.744Z,1509054458.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:38.761Z,1509054458.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:39.155Z,1509054459.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:39.187Z,1509054459.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:39.538Z,1509054459.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:39.555Z,1509054459.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:39.944Z,1509054459.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:39.981Z,1509054459.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:40.329Z,1509054460.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:40.410Z,1509054460.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:40.730Z,1509054460.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:40.763Z,1509054460.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:41.130Z,1509054461.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:41.176Z,1509054461.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:41.535Z,1509054461.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:41.588Z,1509054461.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:41.939Z,1509054461.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:41.984Z,1509054461.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:42.336Z,1509054462.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:42.393Z,1509054462.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:42.737Z,1509054462.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:42.794Z,1509054462.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:43.154Z,1509054463.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:43.186Z,1509054463.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:43.535Z,1509054463.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:43.567Z,1509054463.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:43.926Z,1509054463.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:43.950Z,1509054463.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:44.342Z,1509054464.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:44.389Z,1509054464.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:44.732Z,1509054464.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:44.752Z,1509054464.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:45.148Z,1509054465.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:45.185Z,1509054465.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:45.545Z,1509054465.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:45.614Z,1509054465.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:45.933Z,1509054465.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:45.971Z,1509054465.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:46.331Z,1509054466.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:46.368Z,1509054466.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:46.735Z,1509054466.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:46.772Z,1509054466.772 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:46.773Z,1509054466.773 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 40
2017-10-26T21:47:46.773Z,1509054466.773 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:47:46.785Z,1509054466.785 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:46.785Z,1509054466.785 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 40
2017-10-26T21:47:46.785Z,1509054466.785 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:47:46.847Z,1509054466.847 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:47:46.847Z,1509054466.847 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:47:47.141Z,1509054467.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:47.299Z,1509054467.299 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:47:47.299Z,1509054467.299 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 40
2017-10-26T21:47:47.300Z,1509054467.300 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:47:47.300Z,1509054467.300 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 40
2017-10-26T21:47:47.550Z,1509054467.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:47.629Z,1509054467.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:47:47.639Z,1509054467.639 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:47:47.639Z,1509054467.639 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:47:47.642Z,1509054467.642 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:47:47.642Z,1509054467.642 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:47:47.651Z,1509054467.651 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:47:47.934Z,1509054467.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:47.963Z,1509054467.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:48.334Z,1509054468.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:48.350Z,1509054468.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:48.735Z,1509054468.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:48.752Z,1509054468.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:49.155Z,1509054469.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:49.187Z,1509054469.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:49.542Z,1509054469.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:49.558Z,1509054469.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:49.943Z,1509054469.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:49.959Z,1509054469.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:50.333Z,1509054470.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:50.364Z,1509054470.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:50.726Z,1509054470.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:50.765Z,1509054470.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:51.181Z,1509054471.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:51.223Z,1509054471.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:51.539Z,1509054471.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:51.576Z,1509054471.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:51.940Z,1509054471.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:51.977Z,1509054471.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:52.345Z,1509054472.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:52.371Z,1509054472.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:52.735Z,1509054472.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:52.752Z,1509054472.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:53.140Z,1509054473.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:53.197Z,1509054473.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:53.534Z,1509054473.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:53.576Z,1509054473.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:53.931Z,1509054473.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:53.969Z,1509054473.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:54.329Z,1509054474.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:54.360Z,1509054474.360 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T21:47:54.360Z,1509054474.360 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:47:54.360Z,1509054474.360 [BPC1](ERROR): Data Fault
2017-10-26T21:47:54.375Z,1509054474.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:54.443Z,1509054474.443 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:47:54.728Z,1509054474.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:54.749Z,1509054474.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:55.148Z,1509054475.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:55.188Z,1509054475.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:55.536Z,1509054475.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:55.552Z,1509054475.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:55.669Z,1509054475.669 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:47:55.669Z,1509054475.669 [BPC1] No Fault, FailCount= 1
2017-10-26T21:47:55.935Z,1509054475.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:56.022Z,1509054476.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:56.338Z,1509054476.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:56.399Z,1509054476.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:56.736Z,1509054476.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:56.783Z,1509054476.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:57.156Z,1509054477.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:57.199Z,1509054477.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:57.543Z,1509054477.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:57.559Z,1509054477.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:58.090Z,1509054478.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:58.111Z,1509054478.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:58.493Z,1509054478.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:58.509Z,1509054478.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:58.922Z,1509054478.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:58.986Z,1509054478.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:59.291Z,1509054479.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:59.307Z,1509054479.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:47:59.689Z,1509054479.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:47:59.706Z,1509054479.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:00.093Z,1509054480.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:00.109Z,1509054480.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:00.481Z,1509054480.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:00.514Z,1509054480.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:00.918Z,1509054480.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:00.974Z,1509054480.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:01.301Z,1509054481.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:01.335Z,1509054481.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:01.695Z,1509054481.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:01.712Z,1509054481.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:02.093Z,1509054482.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:02.110Z,1509054482.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:02.499Z,1509054482.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:02.516Z,1509054482.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:02.908Z,1509054482.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:02.988Z,1509054482.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:03.286Z,1509054483.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:03.334Z,1509054483.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:03.686Z,1509054483.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:03.724Z,1509054483.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:04.089Z,1509054484.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:04.105Z,1509054484.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:04.489Z,1509054484.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:04.518Z,1509054484.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:04.915Z,1509054484.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:04.975Z,1509054484.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:05.308Z,1509054485.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:05.330Z,1509054485.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:05.683Z,1509054485.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:05.714Z,1509054485.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:06.101Z,1509054486.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:06.159Z,1509054486.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:06.486Z,1509054486.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:06.519Z,1509054486.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:06.954Z,1509054486.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:06.996Z,1509054486.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:07.287Z,1509054487.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:07.334Z,1509054487.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:07.695Z,1509054487.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:07.711Z,1509054487.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:08.092Z,1509054488.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:08.117Z,1509054488.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:08.500Z,1509054488.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:08.551Z,1509054488.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:08.921Z,1509054488.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:09.034Z,1509054489.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:09.287Z,1509054489.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:09.308Z,1509054489.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:09.687Z,1509054489.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:09.716Z,1509054489.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:10.092Z,1509054490.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:10.164Z,1509054490.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:10.498Z,1509054490.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:10.531Z,1509054490.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:11.024Z,1509054491.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:11.067Z,1509054491.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:11.398Z,1509054491.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:11.472Z,1509054491.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:11.810Z,1509054491.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:11.841Z,1509054491.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:12.212Z,1509054492.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:12.249Z,1509054492.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:12.611Z,1509054492.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:12.644Z,1509054492.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:13.014Z,1509054493.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:13.047Z,1509054493.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:13.415Z,1509054493.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:13.459Z,1509054493.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:13.816Z,1509054493.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:13.832Z,1509054493.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:14.214Z,1509054494.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:14.231Z,1509054494.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:14.610Z,1509054494.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:14.626Z,1509054494.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:15.028Z,1509054495.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:15.069Z,1509054495.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:15.422Z,1509054495.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:15.462Z,1509054495.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:15.807Z,1509054495.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:15.839Z,1509054495.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:16.217Z,1509054496.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:16.234Z,1509054496.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:16.573Z,1509054496.573 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:48:16.615Z,1509054496.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:16.635Z,1509054496.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:17.014Z,1509054497.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:17.048Z,1509054497.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:17.424Z,1509054497.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:17.457Z,1509054497.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:17.811Z,1509054497.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:17.828Z,1509054497.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:18.222Z,1509054498.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:18.248Z,1509054498.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:18.608Z,1509054498.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:18.638Z,1509054498.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:19.029Z,1509054499.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:19.046Z,1509054499.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:19.432Z,1509054499.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:19.466Z,1509054499.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:19.830Z,1509054499.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:19.858Z,1509054499.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:20.212Z,1509054500.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:20.247Z,1509054500.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:20.627Z,1509054500.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:20.661Z,1509054500.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:20.997Z,1509054500.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:21.032Z,1509054501.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:21.422Z,1509054501.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:21.454Z,1509054501.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:21.818Z,1509054501.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:21.835Z,1509054501.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:22.230Z,1509054502.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:22.279Z,1509054502.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:22.596Z,1509054502.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:22.662Z,1509054502.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:23.039Z,1509054503.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:23.120Z,1509054503.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:23.426Z,1509054503.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:23.507Z,1509054503.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:23.813Z,1509054503.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:23.853Z,1509054503.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:24.220Z,1509054504.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:24.278Z,1509054504.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:24.644Z,1509054504.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:24.687Z,1509054504.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:25.064Z,1509054505.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:25.155Z,1509054505.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:25.409Z,1509054505.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:25.475Z,1509054505.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:25.803Z,1509054505.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:25.828Z,1509054505.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:26.210Z,1509054506.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:26.243Z,1509054506.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:26.615Z,1509054506.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:26.647Z,1509054506.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:27.027Z,1509054507.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:27.081Z,1509054507.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:27.409Z,1509054507.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:27.448Z,1509054507.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:27.818Z,1509054507.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:27.835Z,1509054507.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:28.219Z,1509054508.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:28.241Z,1509054508.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:28.601Z,1509054508.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:28.634Z,1509054508.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:29.012Z,1509054509.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:29.030Z,1509054509.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:29.402Z,1509054509.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:29.431Z,1509054509.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:29.817Z,1509054509.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:29.847Z,1509054509.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:30.209Z,1509054510.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:30.247Z,1509054510.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:30.614Z,1509054510.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:30.642Z,1509054510.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:31.019Z,1509054511.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:31.043Z,1509054511.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:31.413Z,1509054511.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:31.430Z,1509054511.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:31.824Z,1509054511.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:31.846Z,1509054511.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:32.192Z,1509054512.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:32.239Z,1509054512.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:32.601Z,1509054512.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:32.633Z,1509054512.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:33.038Z,1509054513.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:33.080Z,1509054513.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:33.407Z,1509054513.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:33.432Z,1509054513.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:33.835Z,1509054513.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:33.857Z,1509054513.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:34.210Z,1509054514.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:34.243Z,1509054514.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:34.618Z,1509054514.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:34.650Z,1509054514.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:35.026Z,1509054515.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:35.067Z,1509054515.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:35.415Z,1509054515.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:35.436Z,1509054515.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:35.817Z,1509054515.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:35.848Z,1509054515.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:36.248Z,1509054516.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:36.292Z,1509054516.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:36.613Z,1509054516.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:36.652Z,1509054516.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:37.017Z,1509054517.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:37.066Z,1509054517.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:37.407Z,1509054517.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:37.494Z,1509054517.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:37.819Z,1509054517.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:37.844Z,1509054517.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:38.206Z,1509054518.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:38.253Z,1509054518.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:38.609Z,1509054518.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:38.625Z,1509054518.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:39.024Z,1509054519.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:39.081Z,1509054519.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:39.422Z,1509054519.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:39.472Z,1509054519.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:39.853Z,1509054519.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:39.879Z,1509054519.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:40.194Z,1509054520.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:40.238Z,1509054520.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:40.615Z,1509054520.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:40.646Z,1509054520.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:41.027Z,1509054521.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:41.055Z,1509054521.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:41.425Z,1509054521.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:41.467Z,1509054521.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:41.815Z,1509054521.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:41.831Z,1509054521.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:42.211Z,1509054522.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:42.231Z,1509054522.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:42.609Z,1509054522.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:42.635Z,1509054522.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:43.022Z,1509054523.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:43.065Z,1509054523.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:43.408Z,1509054523.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:43.444Z,1509054523.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:43.815Z,1509054523.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:43.856Z,1509054523.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:44.208Z,1509054524.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:44.236Z,1509054524.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:44.607Z,1509054524.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:44.623Z,1509054524.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:45.005Z,1509054525.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:45.022Z,1509054525.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:45.417Z,1509054525.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:45.452Z,1509054525.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:45.811Z,1509054525.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:45.839Z,1509054525.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:46.223Z,1509054526.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:46.239Z,1509054526.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:46.604Z,1509054526.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:46.636Z,1509054526.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:47.004Z,1509054527.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:47.037Z,1509054527.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:47.421Z,1509054527.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:47.449Z,1509054527.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:47.815Z,1509054527.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:47.831Z,1509054527.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:48.205Z,1509054528.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:48.234Z,1509054528.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:48.622Z,1509054528.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:48.658Z,1509054528.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:49.021Z,1509054529.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:49.037Z,1509054529.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:49.408Z,1509054529.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:49.438Z,1509054529.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:49.809Z,1509054529.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:49.866Z,1509054529.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:50.224Z,1509054530.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:50.248Z,1509054530.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:50.610Z,1509054530.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:50.640Z,1509054530.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:51.018Z,1509054531.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:51.034Z,1509054531.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:51.423Z,1509054531.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:51.488Z,1509054531.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:51.796Z,1509054531.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:51.835Z,1509054531.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:52.220Z,1509054532.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:52.274Z,1509054532.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:52.628Z,1509054532.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:52.659Z,1509054532.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:52.996Z,1509054532.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:53.076Z,1509054533.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:53.414Z,1509054533.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:53.453Z,1509054533.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:53.805Z,1509054533.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:53.878Z,1509054533.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:54.219Z,1509054534.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:54.268Z,1509054534.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:54.608Z,1509054534.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:54.644Z,1509054534.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:55.011Z,1509054535.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:55.050Z,1509054535.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:55.431Z,1509054535.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:55.461Z,1509054535.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:55.815Z,1509054535.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:55.836Z,1509054535.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:56.235Z,1509054536.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:56.309Z,1509054536.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:56.617Z,1509054536.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:56.664Z,1509054536.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:56.998Z,1509054536.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:57.037Z,1509054537.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:57.426Z,1509054537.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:57.442Z,1509054537.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:57.838Z,1509054537.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:57.882Z,1509054537.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:58.211Z,1509054538.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:58.247Z,1509054538.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:58.611Z,1509054538.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:58.637Z,1509054538.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:59.014Z,1509054539.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:59.042Z,1509054539.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:59.412Z,1509054539.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:59.432Z,1509054539.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:48:59.812Z,1509054539.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:48:59.847Z,1509054539.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:00.217Z,1509054540.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:00.233Z,1509054540.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:00.616Z,1509054540.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:00.639Z,1509054540.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:01.017Z,1509054541.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:01.063Z,1509054541.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:01.423Z,1509054541.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:01.439Z,1509054541.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:01.820Z,1509054541.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:01.837Z,1509054541.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:02.211Z,1509054542.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:02.243Z,1509054542.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:02.608Z,1509054542.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:02.644Z,1509054542.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:03.035Z,1509054543.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:03.052Z,1509054543.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:03.416Z,1509054543.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:03.440Z,1509054543.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:03.813Z,1509054543.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:03.850Z,1509054543.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:04.207Z,1509054544.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:04.228Z,1509054544.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:04.622Z,1509054544.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:04.669Z,1509054544.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:05.017Z,1509054545.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:05.034Z,1509054545.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:05.425Z,1509054545.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:05.444Z,1509054545.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:05.798Z,1509054545.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:05.871Z,1509054545.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:06.203Z,1509054546.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:06.232Z,1509054546.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:06.613Z,1509054546.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:06.662Z,1509054546.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:07.012Z,1509054547.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:07.041Z,1509054547.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:07.423Z,1509054547.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:07.479Z,1509054547.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:07.814Z,1509054547.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:07.864Z,1509054547.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:08.218Z,1509054548.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:08.239Z,1509054548.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:08.622Z,1509054548.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:08.643Z,1509054548.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:09.028Z,1509054549.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:09.064Z,1509054549.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:09.432Z,1509054549.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:09.486Z,1509054549.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:09.807Z,1509054549.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:09.837Z,1509054549.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:10.209Z,1509054550.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:10.247Z,1509054550.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:10.597Z,1509054550.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:10.621Z,1509054550.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:11.012Z,1509054551.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:11.042Z,1509054551.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:11.418Z,1509054551.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:11.448Z,1509054551.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:11.812Z,1509054551.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:11.829Z,1509054551.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:12.219Z,1509054552.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:12.237Z,1509054552.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:12.618Z,1509054552.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:12.640Z,1509054552.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:13.040Z,1509054553.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:13.069Z,1509054553.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:13.403Z,1509054553.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:13.456Z,1509054553.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:13.830Z,1509054553.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:13.868Z,1509054553.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:14.223Z,1509054554.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:14.239Z,1509054554.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:14.646Z,1509054554.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:14.704Z,1509054554.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:15.020Z,1509054555.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:15.048Z,1509054555.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:15.409Z,1509054555.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:15.433Z,1509054555.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:15.810Z,1509054555.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:15.834Z,1509054555.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:16.217Z,1509054556.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:16.233Z,1509054556.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:16.582Z,1509054556.582 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:49:16.634Z,1509054556.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:16.665Z,1509054556.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:17.026Z,1509054557.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:17.072Z,1509054557.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:17.416Z,1509054557.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:17.444Z,1509054557.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:17.812Z,1509054557.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:17.842Z,1509054557.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:18.213Z,1509054558.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:18.229Z,1509054558.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:18.610Z,1509054558.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:18.681Z,1509054558.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:18.000Z,1509054559.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:19.029Z,1509054559.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:19.409Z,1509054559.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:19.464Z,1509054559.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:19.810Z,1509054559.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:19.839Z,1509054559.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:20.213Z,1509054560.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:20.238Z,1509054560.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:20.617Z,1509054560.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:20.665Z,1509054560.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:21.006Z,1509054561.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:21.046Z,1509054561.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:21.398Z,1509054561.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:21.464Z,1509054561.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:21.799Z,1509054561.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:21.867Z,1509054561.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:22.221Z,1509054562.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:22.238Z,1509054562.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:22.621Z,1509054562.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:22.637Z,1509054562.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:23.012Z,1509054563.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:23.038Z,1509054563.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:23.406Z,1509054563.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:23.422Z,1509054563.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:23.816Z,1509054563.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:23.852Z,1509054563.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:24.213Z,1509054564.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:24.230Z,1509054564.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:24.617Z,1509054564.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:24.634Z,1509054564.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:25.014Z,1509054565.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:25.055Z,1509054565.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:25.424Z,1509054565.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:25.453Z,1509054565.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:25.830Z,1509054565.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:25.869Z,1509054565.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:26.359Z,1509054566.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:26.375Z,1509054566.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:26.760Z,1509054566.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:26.782Z,1509054566.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:27.178Z,1509054567.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:27.196Z,1509054567.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:27.556Z,1509054567.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:27.587Z,1509054567.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:27.956Z,1509054567.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:27.984Z,1509054567.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:28.353Z,1509054568.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:28.374Z,1509054568.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:28.750Z,1509054568.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:28.766Z,1509054568.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:29.174Z,1509054569.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:29.220Z,1509054569.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:29.553Z,1509054569.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:29.569Z,1509054569.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:29.948Z,1509054569.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:29.979Z,1509054569.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:30.351Z,1509054570.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:30.393Z,1509054570.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:30.762Z,1509054570.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:30.778Z,1509054570.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:31.172Z,1509054571.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:31.191Z,1509054571.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:31.554Z,1509054571.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:31.583Z,1509054571.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:31.959Z,1509054571.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:31.976Z,1509054571.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:32.351Z,1509054572.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:32.416Z,1509054572.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:32.747Z,1509054572.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:32.779Z,1509054572.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:33.179Z,1509054573.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:33.195Z,1509054573.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:33.545Z,1509054573.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:33.606Z,1509054573.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:33.950Z,1509054573.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:33.992Z,1509054573.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:34.353Z,1509054574.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:34.370Z,1509054574.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:34.747Z,1509054574.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:34.792Z,1509054574.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:35.173Z,1509054575.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:35.206Z,1509054575.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:35.544Z,1509054575.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:35.603Z,1509054575.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:35.968Z,1509054575.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:36.026Z,1509054576.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:36.343Z,1509054576.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:36.381Z,1509054576.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:36.746Z,1509054576.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:36.775Z,1509054576.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:37.171Z,1509054577.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:37.203Z,1509054577.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:37.546Z,1509054577.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:37.571Z,1509054577.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:37.949Z,1509054577.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:37.965Z,1509054577.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:38.451Z,1509054578.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:38.486Z,1509054578.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:38.848Z,1509054578.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:38.865Z,1509054578.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:39.259Z,1509054579.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:39.276Z,1509054579.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:39.657Z,1509054579.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:39.673Z,1509054579.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:40.042Z,1509054580.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:40.088Z,1509054580.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:40.447Z,1509054580.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:40.480Z,1509054580.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:40.849Z,1509054580.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:40.866Z,1509054580.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:41.254Z,1509054581.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:41.270Z,1509054581.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:41.660Z,1509054581.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:41.677Z,1509054581.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:42.053Z,1509054582.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:42.075Z,1509054582.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:42.450Z,1509054582.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:42.467Z,1509054582.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:42.844Z,1509054582.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:42.869Z,1509054582.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:43.254Z,1509054583.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:43.270Z,1509054583.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:43.650Z,1509054583.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:43.666Z,1509054583.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:44.047Z,1509054584.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:44.072Z,1509054584.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:44.438Z,1509054584.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:44.477Z,1509054584.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:44.843Z,1509054584.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:44.880Z,1509054584.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:45.251Z,1509054585.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:45.267Z,1509054585.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:45.650Z,1509054585.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:45.666Z,1509054585.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:46.049Z,1509054586.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:46.065Z,1509054586.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:46.445Z,1509054586.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:46.518Z,1509054586.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:46.848Z,1509054586.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:46.864Z,1509054586.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:47.259Z,1509054587.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:47.298Z,1509054587.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:47.653Z,1509054587.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:47.670Z,1509054587.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:48.056Z,1509054588.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:48.158Z,1509054588.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:48.452Z,1509054588.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:48.476Z,1509054588.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:48.845Z,1509054588.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:48.881Z,1509054588.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:49.259Z,1509054589.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:49.303Z,1509054589.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:49.648Z,1509054589.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:49.677Z,1509054589.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:50.050Z,1509054590.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:50.111Z,1509054590.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:50.459Z,1509054590.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:50.512Z,1509054590.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:50.840Z,1509054590.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:50.912Z,1509054590.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:51.250Z,1509054591.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:51.283Z,1509054591.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:51.649Z,1509054591.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:51.689Z,1509054591.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:52.050Z,1509054592.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:52.074Z,1509054592.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:52.457Z,1509054592.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:52.474Z,1509054592.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:52.851Z,1509054592.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:52.871Z,1509054592.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:53.250Z,1509054593.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:53.285Z,1509054593.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:53.643Z,1509054593.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:53.668Z,1509054593.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:54.046Z,1509054594.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:54.062Z,1509054594.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:54.449Z,1509054594.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:54.466Z,1509054594.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:54.846Z,1509054594.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:54.869Z,1509054594.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:55.263Z,1509054595.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:55.286Z,1509054595.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:55.647Z,1509054595.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:55.681Z,1509054595.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:56.043Z,1509054596.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:56.065Z,1509054596.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:56.445Z,1509054596.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:56.474Z,1509054596.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:56.851Z,1509054596.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:56.868Z,1509054596.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:57.251Z,1509054597.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:57.269Z,1509054597.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:57.639Z,1509054597.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:57.676Z,1509054597.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:58.039Z,1509054598.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:58.077Z,1509054598.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:58.446Z,1509054598.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:58.489Z,1509054598.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:58.843Z,1509054598.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:58.859Z,1509054598.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:59.242Z,1509054599.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:59.275Z,1509054599.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:49:59.655Z,1509054599.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:49:59.692Z,1509054599.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:00.051Z,1509054600.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:00.068Z,1509054600.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:00.439Z,1509054600.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:00.481Z,1509054600.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:00.840Z,1509054600.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:00.878Z,1509054600.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:01.241Z,1509054601.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:01.253Z,1509054601.253 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T21:50:01.253Z,1509054601.253 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:50:01.253Z,1509054601.253 [BPC1](ERROR): Data Fault
2017-10-26T21:50:01.265Z,1509054601.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:01.336Z,1509054601.336 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:50:01.641Z,1509054601.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:01.670Z,1509054601.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:02.055Z,1509054602.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:02.071Z,1509054602.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:02.452Z,1509054602.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:02.474Z,1509054602.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:02.531Z,1509054602.531 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:50:02.531Z,1509054602.531 [BPC1] No Fault, FailCount= 1
2017-10-26T21:50:02.849Z,1509054602.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:02.996Z,1509054602.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:03.240Z,1509054603.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:03.292Z,1509054603.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:03.654Z,1509054603.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:03.670Z,1509054603.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:04.053Z,1509054604.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:04.070Z,1509054604.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:04.454Z,1509054604.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:04.477Z,1509054604.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:04.840Z,1509054604.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:04.870Z,1509054604.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:05.250Z,1509054605.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:05.288Z,1509054605.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:05.651Z,1509054605.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:05.667Z,1509054605.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:06.045Z,1509054606.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:06.062Z,1509054606.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:06.461Z,1509054606.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:06.499Z,1509054606.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:06.848Z,1509054606.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:06.870Z,1509054606.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:07.238Z,1509054607.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:07.282Z,1509054607.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:07.650Z,1509054607.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:07.674Z,1509054607.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:08.044Z,1509054608.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:08.072Z,1509054608.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:08.451Z,1509054608.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:08.494Z,1509054608.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:08.852Z,1509054608.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:08.873Z,1509054608.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:09.237Z,1509054609.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:09.278Z,1509054609.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:09.641Z,1509054609.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:09.678Z,1509054609.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:10.043Z,1509054610.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:10.067Z,1509054610.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:10.445Z,1509054610.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:10.481Z,1509054610.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:10.842Z,1509054610.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:10.858Z,1509054610.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:11.246Z,1509054611.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:11.285Z,1509054611.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:11.645Z,1509054611.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:11.681Z,1509054611.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:12.041Z,1509054612.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:12.081Z,1509054612.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:12.447Z,1509054612.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:12.464Z,1509054612.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:12.853Z,1509054612.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:12.869Z,1509054612.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:13.239Z,1509054613.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:13.276Z,1509054613.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:13.664Z,1509054613.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:13.683Z,1509054613.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:14.048Z,1509054614.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:14.079Z,1509054614.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:14.443Z,1509054614.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:14.505Z,1509054614.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:14.852Z,1509054614.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:14.868Z,1509054614.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:15.252Z,1509054615.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:15.268Z,1509054615.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:15.654Z,1509054615.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:15.727Z,1509054615.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:16.039Z,1509054616.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:16.060Z,1509054616.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:16.452Z,1509054616.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:16.494Z,1509054616.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:16.842Z,1509054616.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:16.959Z,1509054616.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:17.220Z,1509054617.220 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:50:17.266Z,1509054617.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:17.304Z,1509054617.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:17.654Z,1509054617.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:17.723Z,1509054617.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:18.054Z,1509054618.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:18.115Z,1509054618.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:18.443Z,1509054618.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:18.471Z,1509054618.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:18.862Z,1509054618.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:18.950Z,1509054618.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:19.248Z,1509054619.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:19.264Z,1509054619.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:19.649Z,1509054619.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:19.666Z,1509054619.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:20.045Z,1509054620.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:20.081Z,1509054620.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:20.451Z,1509054620.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:20.475Z,1509054620.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:20.849Z,1509054620.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:20.877Z,1509054620.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:21.239Z,1509054621.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:21.272Z,1509054621.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:21.658Z,1509054621.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:21.674Z,1509054621.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:22.036Z,1509054622.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:22.073Z,1509054622.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:22.449Z,1509054622.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:22.482Z,1509054622.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:22.850Z,1509054622.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:22.872Z,1509054622.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:23.238Z,1509054623.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:23.279Z,1509054623.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:23.643Z,1509054623.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:23.675Z,1509054623.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:24.048Z,1509054624.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:24.088Z,1509054624.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:24.456Z,1509054624.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:24.478Z,1509054624.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:24.857Z,1509054624.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:24.880Z,1509054624.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:25.238Z,1509054625.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:25.278Z,1509054625.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:25.645Z,1509054625.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:25.669Z,1509054625.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:26.047Z,1509054626.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:26.063Z,1509054626.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:26.449Z,1509054626.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:26.465Z,1509054626.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:26.853Z,1509054626.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:26.915Z,1509054626.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:27.248Z,1509054627.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:27.273Z,1509054627.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:27.654Z,1509054627.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:27.670Z,1509054627.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:28.046Z,1509054628.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:28.055Z,1509054628.055 [BPC1](ERROR): Failed to parse message.
2017-10-26T21:50:28.055Z,1509054628.055 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T21:50:28.056Z,1509054628.056 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:50:28.056Z,1509054628.056 [BPC1](ERROR): Data Fault
2017-10-26T21:50:28.074Z,1509054628.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:28.190Z,1509054628.190 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:50:28.442Z,1509054628.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:28.483Z,1509054628.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:28.844Z,1509054628.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:28.859Z,1509054628.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:29.258Z,1509054629.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:29.274Z,1509054629.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:29.327Z,1509054629.327 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:50:29.327Z,1509054629.327 [BPC1] No Fault, FailCount= 1
2017-10-26T21:50:29.636Z,1509054629.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:29.725Z,1509054629.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:30.041Z,1509054630.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:30.089Z,1509054630.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:30.442Z,1509054630.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:30.458Z,1509054630.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:30.844Z,1509054630.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:30.860Z,1509054630.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:31.265Z,1509054631.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:31.320Z,1509054631.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:31.642Z,1509054631.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:31.658Z,1509054631.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:32.207Z,1509054632.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:32.239Z,1509054632.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:32.615Z,1509054632.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:32.646Z,1509054632.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:33.038Z,1509054633.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:33.070Z,1509054633.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:33.431Z,1509054633.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:33.448Z,1509054633.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:33.827Z,1509054633.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:33.844Z,1509054633.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:34.242Z,1509054634.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:34.286Z,1509054634.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:34.635Z,1509054634.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:34.652Z,1509054634.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:35.043Z,1509054635.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:35.081Z,1509054635.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:35.431Z,1509054635.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:35.462Z,1509054635.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:35.845Z,1509054635.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:35.883Z,1509054635.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:36.224Z,1509054636.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:36.252Z,1509054636.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:36.623Z,1509054636.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:36.639Z,1509054636.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:37.024Z,1509054637.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:37.067Z,1509054637.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:37.428Z,1509054637.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:37.460Z,1509054637.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:37.819Z,1509054637.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:37.845Z,1509054637.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:38.227Z,1509054638.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:38.243Z,1509054638.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:38.624Z,1509054638.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:38.641Z,1509054638.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:39.015Z,1509054639.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:39.045Z,1509054639.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:39.420Z,1509054639.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:39.453Z,1509054639.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:39.815Z,1509054639.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:39.839Z,1509054639.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:40.216Z,1509054640.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:40.262Z,1509054640.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:40.622Z,1509054640.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:40.646Z,1509054640.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:41.026Z,1509054641.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:41.042Z,1509054641.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:41.422Z,1509054641.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:41.443Z,1509054641.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:41.819Z,1509054641.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:41.848Z,1509054641.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:42.225Z,1509054642.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:42.301Z,1509054642.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:42.622Z,1509054642.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:42.654Z,1509054642.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:43.015Z,1509054643.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:43.075Z,1509054643.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:43.420Z,1509054643.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:43.448Z,1509054643.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:43.906Z,1509054643.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:43.959Z,1509054643.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:44.309Z,1509054644.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:44.333Z,1509054644.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:44.703Z,1509054644.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:44.761Z,1509054644.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:45.107Z,1509054645.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:45.171Z,1509054645.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:45.501Z,1509054645.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:45.533Z,1509054645.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:45.905Z,1509054645.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:45.948Z,1509054645.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:46.303Z,1509054646.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:46.336Z,1509054646.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:46.700Z,1509054646.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:46.717Z,1509054646.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:47.111Z,1509054647.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:47.174Z,1509054647.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:47.511Z,1509054647.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:47.533Z,1509054647.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:47.915Z,1509054647.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:47.932Z,1509054647.932 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:47.932Z,1509054647.932 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 41
2017-10-26T21:50:47.932Z,1509054647.932 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:50:47.936Z,1509054647.936 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:47.936Z,1509054647.936 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 41
2017-10-26T21:50:47.937Z,1509054647.937 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:50:47.975Z,1509054647.975 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:50:47.976Z,1509054647.976 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:50:48.315Z,1509054648.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:48.377Z,1509054648.377 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:50:48.377Z,1509054648.377 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 41
2017-10-26T21:50:48.378Z,1509054648.378 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:50:48.378Z,1509054648.378 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 41
2017-10-26T21:50:48.702Z,1509054648.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:48.730Z,1509054648.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:50:48.730Z,1509054648.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:50:48.730Z,1509054648.730 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:50:48.733Z,1509054648.733 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:50:48.734Z,1509054648.734 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:50:48.734Z,1509054648.734 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:50:49.095Z,1509054649.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:49.119Z,1509054649.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:49.501Z,1509054649.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:49.538Z,1509054649.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:49.900Z,1509054649.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:49.928Z,1509054649.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:50.303Z,1509054650.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:50.339Z,1509054650.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:50.701Z,1509054650.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:50.722Z,1509054650.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:51.103Z,1509054651.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:51.119Z,1509054651.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:51.502Z,1509054651.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:51.540Z,1509054651.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:51.908Z,1509054651.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:51.925Z,1509054651.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:52.323Z,1509054652.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:52.343Z,1509054652.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:52.698Z,1509054652.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:52.740Z,1509054652.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:53.101Z,1509054653.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:53.163Z,1509054653.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:53.506Z,1509054653.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:53.537Z,1509054653.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:53.910Z,1509054653.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:53.936Z,1509054653.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:54.306Z,1509054654.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:54.347Z,1509054654.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:54.703Z,1509054654.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:54.719Z,1509054654.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:55.103Z,1509054655.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:55.160Z,1509054655.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:55.508Z,1509054655.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:55.561Z,1509054655.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:55.910Z,1509054655.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:55.926Z,1509054655.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:56.308Z,1509054656.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:56.327Z,1509054656.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:56.692Z,1509054656.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:56.730Z,1509054656.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:57.101Z,1509054657.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:57.204Z,1509054657.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:57.500Z,1509054657.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:57.536Z,1509054657.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:57.904Z,1509054657.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:57.947Z,1509054657.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:58.311Z,1509054658.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:58.350Z,1509054658.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:58.707Z,1509054658.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:58.736Z,1509054658.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:59.102Z,1509054659.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:59.169Z,1509054659.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:59.508Z,1509054659.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:59.563Z,1509054659.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:50:59.909Z,1509054659.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:50:59.925Z,1509054659.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:00.314Z,1509054660.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:00.330Z,1509054660.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:00.715Z,1509054660.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:00.731Z,1509054660.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:01.101Z,1509054661.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:01.154Z,1509054661.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:01.518Z,1509054661.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:01.535Z,1509054661.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:01.902Z,1509054661.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:01.930Z,1509054661.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:02.303Z,1509054662.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:02.340Z,1509054662.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:02.693Z,1509054662.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:02.709Z,1509054662.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:03.096Z,1509054663.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:03.117Z,1509054663.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:03.512Z,1509054663.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:03.549Z,1509054663.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:03.916Z,1509054663.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:03.953Z,1509054663.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:04.307Z,1509054664.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:04.323Z,1509054664.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:04.713Z,1509054664.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:04.729Z,1509054664.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:05.099Z,1509054665.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:05.131Z,1509054665.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:05.525Z,1509054665.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:05.547Z,1509054665.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:05.905Z,1509054665.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:05.936Z,1509054665.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:06.297Z,1509054666.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:06.334Z,1509054666.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:06.710Z,1509054666.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:06.741Z,1509054666.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:07.102Z,1509054667.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:07.118Z,1509054667.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:07.503Z,1509054667.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:07.519Z,1509054667.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:07.903Z,1509054667.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:07.932Z,1509054667.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:08.305Z,1509054668.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:08.321Z,1509054668.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:08.703Z,1509054668.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:08.726Z,1509054668.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:09.102Z,1509054669.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:09.155Z,1509054669.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:09.503Z,1509054669.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:09.519Z,1509054669.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:09.910Z,1509054669.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:09.926Z,1509054669.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:10.309Z,1509054670.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:10.381Z,1509054670.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:10.717Z,1509054670.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:10.733Z,1509054670.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:11.110Z,1509054671.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:11.182Z,1509054671.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:11.514Z,1509054671.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:11.532Z,1509054671.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:11.894Z,1509054671.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:11.933Z,1509054671.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:12.303Z,1509054672.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:12.367Z,1509054672.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:12.703Z,1509054672.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:12.738Z,1509054672.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:13.101Z,1509054673.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:13.181Z,1509054673.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:13.502Z,1509054673.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:13.545Z,1509054673.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:13.908Z,1509054673.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:13.924Z,1509054673.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:14.305Z,1509054674.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:14.325Z,1509054674.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:14.714Z,1509054674.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:14.735Z,1509054674.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:15.123Z,1509054675.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:15.167Z,1509054675.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:15.501Z,1509054675.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:15.529Z,1509054675.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:15.898Z,1509054675.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:15.936Z,1509054675.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:16.303Z,1509054676.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:16.351Z,1509054676.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:16.705Z,1509054676.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:16.746Z,1509054676.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:17.106Z,1509054677.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:17.167Z,1509054677.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:17.479Z,1509054677.479 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:51:17.507Z,1509054677.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:17.523Z,1509054677.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:17.903Z,1509054677.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:17.919Z,1509054677.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:18.310Z,1509054678.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:18.326Z,1509054678.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:18.710Z,1509054678.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:18.727Z,1509054678.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:19.100Z,1509054679.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:19.146Z,1509054679.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:19.503Z,1509054679.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:19.587Z,1509054679.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:19.906Z,1509054679.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:19.939Z,1509054679.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:20.300Z,1509054680.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:20.316Z,1509054680.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:20.708Z,1509054680.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:20.724Z,1509054680.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:21.110Z,1509054681.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:21.155Z,1509054681.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:21.509Z,1509054681.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:21.525Z,1509054681.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:21.909Z,1509054681.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:21.933Z,1509054681.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:22.298Z,1509054682.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:22.326Z,1509054682.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:22.699Z,1509054682.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:22.732Z,1509054682.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:23.113Z,1509054683.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:23.176Z,1509054683.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:23.505Z,1509054683.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:23.521Z,1509054683.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:23.910Z,1509054683.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:23.947Z,1509054683.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:24.308Z,1509054684.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:24.327Z,1509054684.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:24.711Z,1509054684.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:24.727Z,1509054684.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:25.111Z,1509054685.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:25.165Z,1509054685.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:25.508Z,1509054685.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:25.568Z,1509054685.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:25.897Z,1509054685.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:25.943Z,1509054685.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:26.304Z,1509054686.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:26.334Z,1509054686.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:26.703Z,1509054686.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:26.775Z,1509054686.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:27.102Z,1509054687.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:27.142Z,1509054687.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:27.505Z,1509054687.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:27.558Z,1509054687.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:27.902Z,1509054687.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:27.954Z,1509054687.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:28.305Z,1509054688.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:28.330Z,1509054688.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:28.716Z,1509054688.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:28.737Z,1509054688.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:29.113Z,1509054689.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:29.170Z,1509054689.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:29.516Z,1509054689.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:29.532Z,1509054689.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:29.907Z,1509054689.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:29.938Z,1509054689.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:30.306Z,1509054690.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:30.332Z,1509054690.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:30.708Z,1509054690.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:30.745Z,1509054690.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:31.112Z,1509054691.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:31.156Z,1509054691.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:31.509Z,1509054691.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:31.526Z,1509054691.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:31.904Z,1509054691.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:31.929Z,1509054691.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:32.293Z,1509054692.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:32.330Z,1509054692.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:32.698Z,1509054692.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:32.734Z,1509054692.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:33.130Z,1509054693.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:33.161Z,1509054693.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:33.500Z,1509054693.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:33.532Z,1509054693.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:33.901Z,1509054693.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:33.925Z,1509054693.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:34.307Z,1509054694.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:34.324Z,1509054694.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:34.709Z,1509054694.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:34.726Z,1509054694.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:35.115Z,1509054695.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:35.171Z,1509054695.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:35.520Z,1509054695.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:35.545Z,1509054695.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:35.920Z,1509054695.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:35.947Z,1509054695.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:36.308Z,1509054696.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:36.324Z,1509054696.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:36.709Z,1509054696.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:36.725Z,1509054696.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:37.117Z,1509054697.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:37.175Z,1509054697.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:37.509Z,1509054697.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:37.525Z,1509054697.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:37.911Z,1509054697.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:37.928Z,1509054697.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:38.320Z,1509054698.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:38.336Z,1509054698.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:38.699Z,1509054698.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:38.728Z,1509054698.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:39.104Z,1509054699.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:39.176Z,1509054699.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:39.505Z,1509054699.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:39.544Z,1509054699.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:39.901Z,1509054699.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:39.981Z,1509054699.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:40.305Z,1509054700.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:40.322Z,1509054700.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:40.704Z,1509054700.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:40.757Z,1509054700.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:41.111Z,1509054701.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:41.164Z,1509054701.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:41.509Z,1509054701.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:41.564Z,1509054701.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:41.910Z,1509054701.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:41.965Z,1509054701.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:42.309Z,1509054702.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:42.346Z,1509054702.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:42.696Z,1509054702.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:42.733Z,1509054702.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:43.094Z,1509054703.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:43.171Z,1509054703.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:43.507Z,1509054703.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:43.540Z,1509054703.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:43.904Z,1509054703.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:43.941Z,1509054703.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:44.300Z,1509054704.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:44.340Z,1509054704.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:44.699Z,1509054704.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:44.739Z,1509054704.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:45.097Z,1509054705.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:45.114Z,1509054705.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:45.496Z,1509054705.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:45.512Z,1509054705.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:45.900Z,1509054705.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:45.916Z,1509054705.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:46.305Z,1509054706.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:46.322Z,1509054706.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:46.706Z,1509054706.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:46.722Z,1509054706.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:47.110Z,1509054707.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:47.159Z,1509054707.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:47.501Z,1509054707.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:47.534Z,1509054707.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:47.903Z,1509054707.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:47.943Z,1509054707.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:48.298Z,1509054708.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:48.339Z,1509054708.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:48.697Z,1509054708.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:48.733Z,1509054708.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:49.149Z,1509054709.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:49.184Z,1509054709.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:49.496Z,1509054709.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:49.537Z,1509054709.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:49.901Z,1509054709.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:49.922Z,1509054709.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:50.306Z,1509054710.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:50.345Z,1509054710.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:50.709Z,1509054710.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:50.726Z,1509054710.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:51.127Z,1509054711.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:51.173Z,1509054711.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:51.514Z,1509054711.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:51.543Z,1509054711.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:51.902Z,1509054711.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:51.929Z,1509054711.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:52.300Z,1509054712.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:52.345Z,1509054712.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:52.701Z,1509054712.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:52.740Z,1509054712.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:53.100Z,1509054713.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:53.146Z,1509054713.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:53.514Z,1509054713.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:53.556Z,1509054713.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:53.901Z,1509054713.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:53.963Z,1509054713.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:54.304Z,1509054714.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:54.370Z,1509054714.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:54.699Z,1509054714.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:54.737Z,1509054714.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:55.098Z,1509054715.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:55.178Z,1509054715.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:55.502Z,1509054715.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:55.539Z,1509054715.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:55.902Z,1509054715.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:55.970Z,1509054715.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:56.314Z,1509054716.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:56.353Z,1509054716.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:56.707Z,1509054716.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:56.737Z,1509054716.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:57.100Z,1509054717.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:57.165Z,1509054717.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:57.513Z,1509054717.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:57.538Z,1509054717.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:57.902Z,1509054717.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:57.918Z,1509054717.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:58.392Z,1509054718.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:58.415Z,1509054718.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:58.791Z,1509054718.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:58.820Z,1509054718.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:59.205Z,1509054719.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:59.229Z,1509054719.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:59.588Z,1509054719.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:51:59.627Z,1509054719.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:51:59.987Z,1509054719.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:00.029Z,1509054720.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:00.382Z,1509054720.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:00.399Z,1509054720.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:00.793Z,1509054720.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:00.809Z,1509054720.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:01.190Z,1509054721.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:01.211Z,1509054721.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:01.597Z,1509054721.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:01.622Z,1509054721.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:01.994Z,1509054721.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:02.010Z,1509054722.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:02.388Z,1509054722.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:02.412Z,1509054722.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:02.797Z,1509054722.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:02.828Z,1509054722.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:03.192Z,1509054723.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:03.220Z,1509054723.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:03.594Z,1509054723.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:03.629Z,1509054723.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:03.994Z,1509054723.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:04.019Z,1509054724.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:04.391Z,1509054724.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:04.407Z,1509054724.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:04.796Z,1509054724.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:04.845Z,1509054724.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:05.189Z,1509054725.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:05.222Z,1509054725.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:05.602Z,1509054725.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:05.624Z,1509054725.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:06.004Z,1509054726.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:06.021Z,1509054726.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:06.400Z,1509054726.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:06.417Z,1509054726.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:06.785Z,1509054726.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:06.820Z,1509054726.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:07.196Z,1509054727.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:07.227Z,1509054727.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:07.590Z,1509054727.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:07.619Z,1509054727.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:07.988Z,1509054727.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:08.054Z,1509054728.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:08.398Z,1509054728.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:08.439Z,1509054728.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:08.797Z,1509054728.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:08.814Z,1509054728.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:09.202Z,1509054729.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:09.250Z,1509054729.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:09.597Z,1509054729.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:09.617Z,1509054729.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:10.002Z,1509054730.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:10.059Z,1509054730.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:10.391Z,1509054730.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:10.449Z,1509054730.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:10.791Z,1509054730.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:10.808Z,1509054730.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:11.190Z,1509054731.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:11.217Z,1509054731.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:11.593Z,1509054731.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:11.628Z,1509054731.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:12.094Z,1509054732.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:12.119Z,1509054732.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:12.492Z,1509054732.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:12.513Z,1509054732.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:12.947Z,1509054732.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:13.006Z,1509054733.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:13.297Z,1509054733.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:13.330Z,1509054733.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:13.686Z,1509054733.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:13.719Z,1509054733.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:14.084Z,1509054734.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:14.117Z,1509054734.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:14.491Z,1509054734.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:14.508Z,1509054734.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:14.931Z,1509054734.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:15.007Z,1509054735.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:15.293Z,1509054735.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:15.310Z,1509054735.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:15.698Z,1509054735.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:15.714Z,1509054735.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:16.182Z,1509054736.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:16.213Z,1509054736.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:16.495Z,1509054736.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:16.539Z,1509054736.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:16.892Z,1509054736.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:16.982Z,1509054736.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:17.298Z,1509054737.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:17.314Z,1509054737.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:17.667Z,1509054737.667 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:52:17.702Z,1509054737.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:17.725Z,1509054737.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:18.103Z,1509054738.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:18.157Z,1509054738.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:18.502Z,1509054738.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:18.519Z,1509054738.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:18.915Z,1509054738.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:18.981Z,1509054738.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:19.294Z,1509054739.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:19.325Z,1509054739.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:19.691Z,1509054739.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:19.708Z,1509054739.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:20.095Z,1509054740.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:20.112Z,1509054740.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:20.492Z,1509054740.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:20.508Z,1509054740.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:20.935Z,1509054740.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:21.007Z,1509054741.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:21.299Z,1509054741.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:21.356Z,1509054741.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:21.691Z,1509054741.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:21.732Z,1509054741.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:22.109Z,1509054742.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:22.144Z,1509054742.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:22.491Z,1509054742.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:22.588Z,1509054742.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:22.931Z,1509054742.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:23.006Z,1509054743.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:23.293Z,1509054743.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:23.357Z,1509054743.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:23.703Z,1509054743.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:23.720Z,1509054743.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:24.108Z,1509054744.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:24.181Z,1509054744.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:24.486Z,1509054744.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:24.555Z,1509054744.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:24.918Z,1509054744.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:24.997Z,1509054744.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:25.288Z,1509054745.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:25.328Z,1509054745.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:25.697Z,1509054745.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:25.730Z,1509054745.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:26.088Z,1509054746.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:26.159Z,1509054746.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:26.491Z,1509054746.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:26.527Z,1509054746.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:26.900Z,1509054746.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:26.979Z,1509054746.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:27.295Z,1509054747.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:27.315Z,1509054747.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:27.687Z,1509054747.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:27.711Z,1509054747.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:28.118Z,1509054748.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:28.162Z,1509054748.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:28.514Z,1509054748.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:28.530Z,1509054748.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:28.942Z,1509054748.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:28.985Z,1509054748.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:29.290Z,1509054749.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:29.319Z,1509054749.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:29.698Z,1509054749.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:29.715Z,1509054749.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:30.097Z,1509054750.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:30.158Z,1509054750.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:30.499Z,1509054750.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:30.516Z,1509054750.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:30.913Z,1509054750.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:30.978Z,1509054750.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:31.285Z,1509054751.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:31.332Z,1509054751.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:31.694Z,1509054751.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:31.730Z,1509054751.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:32.095Z,1509054752.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:32.172Z,1509054752.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:32.497Z,1509054752.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:32.513Z,1509054752.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:32.894Z,1509054752.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:32.910Z,1509054752.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:33.290Z,1509054753.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:33.326Z,1509054753.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:33.690Z,1509054753.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:33.719Z,1509054753.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:34.087Z,1509054754.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:34.156Z,1509054754.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:34.493Z,1509054754.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:34.509Z,1509054754.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:34.893Z,1509054754.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:34.909Z,1509054754.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:35.283Z,1509054755.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:35.316Z,1509054755.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:35.692Z,1509054755.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:35.725Z,1509054755.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:36.086Z,1509054756.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:36.103Z,1509054756.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:36.500Z,1509054756.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:36.561Z,1509054756.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:36.896Z,1509054756.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:36.999Z,1509054756.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:37.282Z,1509054757.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:37.319Z,1509054757.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:37.691Z,1509054757.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:37.744Z,1509054757.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:38.092Z,1509054758.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:38.108Z,1509054758.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:38.502Z,1509054758.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:38.553Z,1509054758.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:38.899Z,1509054758.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:39.015Z,1509054759.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:39.296Z,1509054759.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:39.312Z,1509054759.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:39.694Z,1509054759.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:39.714Z,1509054759.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:40.104Z,1509054760.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:40.171Z,1509054760.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:40.521Z,1509054760.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:40.538Z,1509054760.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:40.902Z,1509054760.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:40.919Z,1509054760.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:41.285Z,1509054761.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:41.322Z,1509054761.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:41.685Z,1509054761.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:41.722Z,1509054761.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:42.084Z,1509054762.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:42.112Z,1509054762.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:42.494Z,1509054762.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:42.510Z,1509054762.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:42.889Z,1509054762.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:42.905Z,1509054762.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:43.327Z,1509054763.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:43.364Z,1509054763.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:43.697Z,1509054763.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:43.713Z,1509054763.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:44.089Z,1509054764.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:44.118Z,1509054764.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:44.494Z,1509054764.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:44.524Z,1509054764.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:44.880Z,1509054764.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:44.904Z,1509054764.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:45.289Z,1509054765.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:45.335Z,1509054765.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:45.697Z,1509054765.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:45.722Z,1509054765.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:46.102Z,1509054766.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:46.121Z,1509054766.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:46.508Z,1509054766.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:46.539Z,1509054766.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:46.887Z,1509054766.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:46.919Z,1509054766.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:47.290Z,1509054767.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:47.334Z,1509054767.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:47.719Z,1509054767.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:47.740Z,1509054767.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:48.094Z,1509054768.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:48.112Z,1509054768.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:48.496Z,1509054768.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:48.514Z,1509054768.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:48.898Z,1509054768.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:48.977Z,1509054768.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:49.289Z,1509054769.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:49.324Z,1509054769.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:49.694Z,1509054769.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:49.736Z,1509054769.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:50.088Z,1509054770.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:50.104Z,1509054770.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:50.497Z,1509054770.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:50.515Z,1509054770.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:50.896Z,1509054770.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:51.037Z,1509054771.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:51.290Z,1509054771.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:51.341Z,1509054771.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:51.692Z,1509054771.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:51.708Z,1509054771.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:52.091Z,1509054772.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:52.160Z,1509054772.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:52.504Z,1509054772.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:52.521Z,1509054772.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:52.900Z,1509054772.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:52.991Z,1509054772.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:53.301Z,1509054773.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:53.346Z,1509054773.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:53.691Z,1509054773.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:53.708Z,1509054773.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:54.196Z,1509054774.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:54.230Z,1509054774.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:54.609Z,1509054774.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:54.630Z,1509054774.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:55.004Z,1509054775.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:55.036Z,1509054775.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:55.412Z,1509054775.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:55.428Z,1509054775.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:55.806Z,1509054775.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:55.835Z,1509054775.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:56.191Z,1509054776.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:56.235Z,1509054776.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:56.584Z,1509054776.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:56.675Z,1509054776.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:56.991Z,1509054776.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:57.037Z,1509054777.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:57.408Z,1509054777.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:57.432Z,1509054777.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:57.809Z,1509054777.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:57.838Z,1509054777.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:58.215Z,1509054778.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:58.237Z,1509054778.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:58.620Z,1509054778.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:58.638Z,1509054778.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:59.018Z,1509054779.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:59.058Z,1509054779.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:59.418Z,1509054779.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:59.443Z,1509054779.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:52:59.820Z,1509054779.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:52:59.841Z,1509054779.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:00.193Z,1509054780.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:00.266Z,1509054780.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:00.613Z,1509054780.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:00.650Z,1509054780.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:01.017Z,1509054781.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:01.041Z,1509054781.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:01.416Z,1509054781.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:01.444Z,1509054781.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:01.827Z,1509054781.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:01.868Z,1509054781.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:02.194Z,1509054782.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:02.227Z,1509054782.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:02.603Z,1509054782.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:02.640Z,1509054782.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:03.032Z,1509054783.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:03.065Z,1509054783.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:03.407Z,1509054783.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:03.448Z,1509054783.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:03.794Z,1509054783.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:03.831Z,1509054783.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:04.195Z,1509054784.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:04.224Z,1509054784.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:04.607Z,1509054784.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:04.636Z,1509054784.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:05.010Z,1509054785.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:05.042Z,1509054785.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:05.413Z,1509054785.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:05.491Z,1509054785.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:05.801Z,1509054785.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:05.830Z,1509054785.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:06.221Z,1509054786.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:06.254Z,1509054786.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:06.603Z,1509054786.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:06.664Z,1509054786.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:07.008Z,1509054787.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:07.025Z,1509054787.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:07.405Z,1509054787.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:07.462Z,1509054787.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:07.794Z,1509054787.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:07.859Z,1509054787.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:08.216Z,1509054788.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:08.233Z,1509054788.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:08.689Z,1509054788.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:08.735Z,1509054788.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:09.118Z,1509054789.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:09.164Z,1509054789.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:09.499Z,1509054789.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:09.533Z,1509054789.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:09.897Z,1509054789.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:09.935Z,1509054789.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:10.298Z,1509054790.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:10.327Z,1509054790.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:10.703Z,1509054790.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:10.719Z,1509054790.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:11.090Z,1509054791.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:11.158Z,1509054791.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:11.508Z,1509054791.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:11.525Z,1509054791.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:11.899Z,1509054791.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:11.926Z,1509054791.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:12.297Z,1509054792.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:12.331Z,1509054792.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:12.708Z,1509054792.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:12.733Z,1509054792.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:13.090Z,1509054793.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:13.131Z,1509054793.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:13.509Z,1509054793.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:13.534Z,1509054793.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:13.903Z,1509054793.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:13.928Z,1509054793.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:14.301Z,1509054794.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:14.317Z,1509054794.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:14.705Z,1509054794.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:14.741Z,1509054794.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:15.120Z,1509054795.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:15.168Z,1509054795.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:15.509Z,1509054795.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:15.538Z,1509054795.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:15.894Z,1509054795.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:15.942Z,1509054795.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:16.294Z,1509054796.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:16.331Z,1509054796.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:16.707Z,1509054796.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:16.734Z,1509054796.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:17.099Z,1509054797.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:17.148Z,1509054797.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:17.503Z,1509054797.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:17.519Z,1509054797.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:17.872Z,1509054797.872 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:53:17.907Z,1509054797.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:17.943Z,1509054797.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:18.308Z,1509054798.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:18.325Z,1509054798.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:18.691Z,1509054798.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:18.719Z,1509054798.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:19.095Z,1509054799.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:19.162Z,1509054799.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:19.496Z,1509054799.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:19.549Z,1509054799.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:19.892Z,1509054799.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:19.952Z,1509054799.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:20.295Z,1509054800.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:20.332Z,1509054800.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:20.700Z,1509054800.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:20.747Z,1509054800.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:21.102Z,1509054801.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:21.118Z,1509054801.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:21.503Z,1509054801.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:21.564Z,1509054801.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:21.902Z,1509054801.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:21.955Z,1509054801.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:22.303Z,1509054802.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:22.332Z,1509054802.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:22.703Z,1509054802.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:22.735Z,1509054802.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:23.096Z,1509054803.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:23.140Z,1509054803.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:23.499Z,1509054803.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:23.535Z,1509054803.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:23.897Z,1509054803.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:23.921Z,1509054803.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:24.299Z,1509054804.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:24.315Z,1509054804.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:24.694Z,1509054804.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:24.710Z,1509054804.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:25.105Z,1509054805.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:25.154Z,1509054805.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:25.509Z,1509054805.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:25.525Z,1509054805.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:25.900Z,1509054805.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:25.917Z,1509054805.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:26.304Z,1509054806.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:26.326Z,1509054806.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:26.704Z,1509054806.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:26.722Z,1509054806.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:27.099Z,1509054807.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:27.167Z,1509054807.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:27.499Z,1509054807.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:27.528Z,1509054807.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:27.898Z,1509054807.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:27.914Z,1509054807.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:28.303Z,1509054808.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:28.339Z,1509054808.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:28.703Z,1509054808.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:28.719Z,1509054808.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:29.115Z,1509054809.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:29.180Z,1509054809.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:29.507Z,1509054809.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:29.528Z,1509054809.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:29.892Z,1509054809.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:29.929Z,1509054809.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:30.301Z,1509054810.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:30.330Z,1509054810.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:30.701Z,1509054810.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:30.730Z,1509054810.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:31.100Z,1509054811.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:31.165Z,1509054811.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:31.502Z,1509054811.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:31.534Z,1509054811.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:31.901Z,1509054811.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:31.917Z,1509054811.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:32.303Z,1509054812.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:32.319Z,1509054812.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:32.701Z,1509054812.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:32.725Z,1509054812.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:33.101Z,1509054813.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:33.118Z,1509054813.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:33.507Z,1509054813.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:33.529Z,1509054813.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:33.903Z,1509054813.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:33.978Z,1509054813.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:34.294Z,1509054814.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:34.354Z,1509054814.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:34.704Z,1509054814.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:34.732Z,1509054814.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:35.097Z,1509054815.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:35.145Z,1509054815.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:35.505Z,1509054815.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:35.540Z,1509054815.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:35.898Z,1509054815.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:35.950Z,1509054815.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:36.294Z,1509054816.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:36.343Z,1509054816.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:36.696Z,1509054816.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:36.712Z,1509054816.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:37.108Z,1509054817.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:37.158Z,1509054817.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:37.514Z,1509054817.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:37.530Z,1509054817.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:37.903Z,1509054817.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:37.920Z,1509054817.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:38.311Z,1509054818.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:38.332Z,1509054818.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:38.692Z,1509054818.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:38.728Z,1509054818.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:39.096Z,1509054819.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:39.153Z,1509054819.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:39.517Z,1509054819.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:39.535Z,1509054819.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:39.895Z,1509054819.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:39.932Z,1509054819.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:40.304Z,1509054820.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:40.343Z,1509054820.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:40.701Z,1509054820.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:40.734Z,1509054820.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:41.107Z,1509054821.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:41.142Z,1509054821.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:41.509Z,1509054821.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:41.526Z,1509054821.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:41.907Z,1509054821.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:41.924Z,1509054821.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:42.307Z,1509054822.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:42.337Z,1509054822.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:42.696Z,1509054822.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:42.725Z,1509054822.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:43.096Z,1509054823.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:43.156Z,1509054823.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:43.501Z,1509054823.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:43.533Z,1509054823.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:43.898Z,1509054823.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:43.914Z,1509054823.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:44.295Z,1509054824.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:44.312Z,1509054824.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:44.698Z,1509054824.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:44.714Z,1509054824.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:45.098Z,1509054825.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:45.157Z,1509054825.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:45.507Z,1509054825.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:45.523Z,1509054825.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:45.902Z,1509054825.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:45.919Z,1509054825.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:46.309Z,1509054826.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:46.326Z,1509054826.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:46.703Z,1509054826.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:46.727Z,1509054826.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:47.117Z,1509054827.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:47.170Z,1509054827.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:47.492Z,1509054827.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:47.520Z,1509054827.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:47.894Z,1509054827.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:47.924Z,1509054827.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:48.301Z,1509054828.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:48.354Z,1509054828.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:48.701Z,1509054828.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:48.782Z,1509054828.782 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:48.782Z,1509054828.782 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 42
2017-10-26T21:53:48.782Z,1509054828.782 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:53:48.786Z,1509054828.786 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:48.787Z,1509054828.787 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 42
2017-10-26T21:53:48.787Z,1509054828.787 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:53:48.853Z,1509054828.853 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:53:48.853Z,1509054828.853 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:53:49.100Z,1509054829.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:49.206Z,1509054829.206 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:53:49.206Z,1509054829.206 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 42
2017-10-26T21:53:49.207Z,1509054829.207 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:53:49.207Z,1509054829.207 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 42
2017-10-26T21:53:49.510Z,1509054829.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:49.562Z,1509054829.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:53:49.562Z,1509054829.562 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:53:49.562Z,1509054829.562 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:53:49.565Z,1509054829.565 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:53:49.566Z,1509054829.566 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:53:49.566Z,1509054829.566 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:53:49.900Z,1509054829.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:49.916Z,1509054829.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:50.295Z,1509054830.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:50.350Z,1509054830.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:50.707Z,1509054830.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:50.770Z,1509054830.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:51.093Z,1509054831.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:51.160Z,1509054831.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:51.498Z,1509054831.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:51.541Z,1509054831.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:51.895Z,1509054831.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:51.944Z,1509054831.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:52.299Z,1509054832.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:52.332Z,1509054832.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:52.699Z,1509054832.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:52.736Z,1509054832.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:53.106Z,1509054833.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:53.144Z,1509054833.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:53.504Z,1509054833.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:53.526Z,1509054833.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:53.908Z,1509054833.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:53.930Z,1509054833.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:54.307Z,1509054834.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:54.323Z,1509054834.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:54.710Z,1509054834.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:54.726Z,1509054834.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:55.095Z,1509054835.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:55.132Z,1509054835.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:55.497Z,1509054835.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:55.526Z,1509054835.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:55.898Z,1509054835.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:55.935Z,1509054835.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:56.301Z,1509054836.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:56.329Z,1509054836.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:56.693Z,1509054836.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:56.731Z,1509054836.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:57.100Z,1509054837.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:57.117Z,1509054837.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:57.500Z,1509054837.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:57.517Z,1509054837.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:57.907Z,1509054837.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:57.924Z,1509054837.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:58.297Z,1509054838.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:58.325Z,1509054838.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:58.720Z,1509054838.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:58.737Z,1509054838.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:59.109Z,1509054839.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:59.164Z,1509054839.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:59.496Z,1509054839.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:59.529Z,1509054839.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:53:59.899Z,1509054839.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:53:59.923Z,1509054839.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:00.300Z,1509054840.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:00.316Z,1509054840.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:00.707Z,1509054840.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:00.739Z,1509054840.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:01.125Z,1509054841.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:01.199Z,1509054841.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:01.498Z,1509054841.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:01.530Z,1509054841.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:01.902Z,1509054841.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:01.924Z,1509054841.924 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T21:54:01.924Z,1509054841.924 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:54:01.924Z,1509054841.924 [BPC1](ERROR): Data Fault
2017-10-26T21:54:01.933Z,1509054841.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:01.967Z,1509054841.967 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:54:02.296Z,1509054842.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:02.329Z,1509054842.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:02.701Z,1509054842.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:02.746Z,1509054842.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:03.226Z,1509054843.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:03.254Z,1509054843.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:03.421Z,1509054843.421 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:54:03.421Z,1509054843.421 [BPC1] No Fault, FailCount= 1
2017-10-26T21:54:03.609Z,1509054843.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:03.694Z,1509054843.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:04.011Z,1509054844.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:04.043Z,1509054844.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:04.414Z,1509054844.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:04.487Z,1509054844.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:04.837Z,1509054844.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:04.853Z,1509054844.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:05.228Z,1509054845.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:05.259Z,1509054845.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:05.613Z,1509054845.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:05.630Z,1509054845.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:06.020Z,1509054846.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:06.037Z,1509054846.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:06.415Z,1509054846.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:06.444Z,1509054846.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:06.829Z,1509054846.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:06.861Z,1509054846.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:07.218Z,1509054847.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:07.251Z,1509054847.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:07.614Z,1509054847.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:07.630Z,1509054847.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:08.013Z,1509054848.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:08.042Z,1509054848.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:08.418Z,1509054848.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:08.434Z,1509054848.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:08.828Z,1509054848.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:08.852Z,1509054848.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:09.214Z,1509054849.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:09.254Z,1509054849.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:09.616Z,1509054849.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:09.655Z,1509054849.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:10.022Z,1509054850.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:10.050Z,1509054850.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:10.407Z,1509054850.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:10.428Z,1509054850.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:10.807Z,1509054850.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:10.837Z,1509054850.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:11.217Z,1509054851.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:11.247Z,1509054851.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:11.618Z,1509054851.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:11.651Z,1509054851.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:12.013Z,1509054852.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:12.038Z,1509054852.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:12.419Z,1509054852.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:12.443Z,1509054852.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:12.807Z,1509054852.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:12.836Z,1509054852.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:13.216Z,1509054853.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:13.252Z,1509054853.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:13.618Z,1509054853.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:13.650Z,1509054853.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:14.017Z,1509054854.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:14.048Z,1509054854.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:14.413Z,1509054854.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:14.448Z,1509054854.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:14.809Z,1509054854.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:14.848Z,1509054854.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:15.212Z,1509054855.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:15.249Z,1509054855.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:15.614Z,1509054855.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:15.657Z,1509054855.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:16.019Z,1509054856.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:16.101Z,1509054856.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:16.416Z,1509054856.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:16.432Z,1509054856.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:16.812Z,1509054856.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:16.863Z,1509054856.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:17.213Z,1509054857.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:17.254Z,1509054857.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:17.620Z,1509054857.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:17.636Z,1509054857.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:18.078Z,1509054858.078 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:54:18.104Z,1509054858.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:18.198Z,1509054858.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:18.497Z,1509054858.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:18.532Z,1509054858.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:18.896Z,1509054858.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:19.018Z,1509054859.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:19.306Z,1509054859.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:19.354Z,1509054859.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:19.707Z,1509054859.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:19.723Z,1509054859.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:20.135Z,1509054860.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:20.169Z,1509054860.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:20.498Z,1509054860.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:20.528Z,1509054860.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:20.895Z,1509054860.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:21.003Z,1509054861.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:21.296Z,1509054861.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:21.321Z,1509054861.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:21.698Z,1509054861.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:21.731Z,1509054861.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:21.770Z,1509054861.770 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T21:54:22.149Z,1509054862.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:22.177Z,1509054862.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:22.509Z,1509054862.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:22.533Z,1509054862.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:22.967Z,1509054862.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:23.003Z,1509054863.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:23.299Z,1509054863.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:23.335Z,1509054863.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:23.704Z,1509054863.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:23.736Z,1509054863.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:24.107Z,1509054864.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:24.179Z,1509054864.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:24.510Z,1509054864.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:24.570Z,1509054864.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:24.957Z,1509054864.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:25.026Z,1509054865.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:25.306Z,1509054865.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:25.354Z,1509054865.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:25.696Z,1509054865.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:25.718Z,1509054865.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:26.107Z,1509054866.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:26.161Z,1509054866.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:26.513Z,1509054866.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:26.534Z,1509054866.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:26.949Z,1509054866.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:26.992Z,1509054866.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:27.299Z,1509054867.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:27.336Z,1509054867.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:27.704Z,1509054867.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:27.746Z,1509054867.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:28.110Z,1509054868.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:28.179Z,1509054868.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:28.510Z,1509054868.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:28.527Z,1509054868.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:28.909Z,1509054868.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:28.991Z,1509054868.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:29.296Z,1509054869.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:29.337Z,1509054869.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:29.699Z,1509054869.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:29.715Z,1509054869.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:30.106Z,1509054870.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:30.155Z,1509054870.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:30.503Z,1509054870.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:30.529Z,1509054870.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:30.949Z,1509054870.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:31.009Z,1509054871.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:31.299Z,1509054871.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:31.365Z,1509054871.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:31.705Z,1509054871.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:31.721Z,1509054871.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:32.106Z,1509054872.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:32.164Z,1509054872.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:32.518Z,1509054872.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:32.570Z,1509054872.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:32.942Z,1509054872.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:32.971Z,1509054872.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:33.299Z,1509054873.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:33.355Z,1509054873.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:33.705Z,1509054873.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:33.721Z,1509054873.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:34.101Z,1509054874.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:34.172Z,1509054874.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:34.506Z,1509054874.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:34.528Z,1509054874.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:34.907Z,1509054874.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:34.945Z,1509054874.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:35.316Z,1509054875.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:35.331Z,1509054875.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:35.702Z,1509054875.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:35.735Z,1509054875.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:36.099Z,1509054876.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:36.151Z,1509054876.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:36.507Z,1509054876.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:36.522Z,1509054876.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:36.903Z,1509054876.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:36.919Z,1509054876.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:37.328Z,1509054877.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:37.351Z,1509054877.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:37.699Z,1509054877.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:37.732Z,1509054877.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:38.098Z,1509054878.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:38.162Z,1509054878.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:38.511Z,1509054878.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:38.551Z,1509054878.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:38.943Z,1509054878.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:38.976Z,1509054878.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:39.295Z,1509054879.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:39.345Z,1509054879.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:39.704Z,1509054879.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:39.729Z,1509054879.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:40.110Z,1509054880.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:40.168Z,1509054880.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:40.514Z,1509054880.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:40.544Z,1509054880.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:40.971Z,1509054880.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:41.021Z,1509054881.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:41.303Z,1509054881.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:41.337Z,1509054881.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:41.704Z,1509054881.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:41.725Z,1509054881.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:42.106Z,1509054882.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:42.152Z,1509054882.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:42.510Z,1509054882.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:42.526Z,1509054882.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:42.910Z,1509054882.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:42.992Z,1509054882.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:43.303Z,1509054883.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:43.339Z,1509054883.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:43.704Z,1509054883.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:43.720Z,1509054883.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:44.107Z,1509054884.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:44.161Z,1509054884.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:44.513Z,1509054884.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:44.533Z,1509054884.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:44.920Z,1509054884.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:45.020Z,1509054885.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:45.297Z,1509054885.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:45.373Z,1509054885.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:45.706Z,1509054885.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:45.748Z,1509054885.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:46.105Z,1509054886.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:46.187Z,1509054886.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:46.516Z,1509054886.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:46.543Z,1509054886.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:46.906Z,1509054886.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:46.923Z,1509054886.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:47.296Z,1509054887.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:47.342Z,1509054887.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:47.708Z,1509054887.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:47.732Z,1509054887.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:48.107Z,1509054888.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:48.168Z,1509054888.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:48.517Z,1509054888.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:48.578Z,1509054888.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:48.910Z,1509054888.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:48.990Z,1509054888.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:49.301Z,1509054889.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:49.330Z,1509054889.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:49.706Z,1509054889.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:49.722Z,1509054889.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:50.113Z,1509054890.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:50.167Z,1509054890.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:50.506Z,1509054890.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:50.532Z,1509054890.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:50.907Z,1509054890.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:50.923Z,1509054890.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:51.293Z,1509054891.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:51.318Z,1509054891.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:51.702Z,1509054891.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:51.736Z,1509054891.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:52.103Z,1509054892.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:52.148Z,1509054892.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:52.511Z,1509054892.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:52.528Z,1509054892.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:52.908Z,1509054892.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:52.930Z,1509054892.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:53.306Z,1509054893.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:53.335Z,1509054893.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:53.706Z,1509054893.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:53.736Z,1509054893.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:54.101Z,1509054894.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:54.158Z,1509054894.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:54.497Z,1509054894.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:54.513Z,1509054894.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:54.902Z,1509054894.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:54.927Z,1509054894.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:55.317Z,1509054895.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:55.357Z,1509054895.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:55.721Z,1509054895.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:55.737Z,1509054895.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:56.113Z,1509054896.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:56.181Z,1509054896.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:56.517Z,1509054896.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:56.533Z,1509054896.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:56.899Z,1509054896.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:56.946Z,1509054896.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:57.309Z,1509054897.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:57.353Z,1509054897.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:57.730Z,1509054897.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:57.769Z,1509054897.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:58.111Z,1509054898.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:58.167Z,1509054898.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:58.501Z,1509054898.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:58.526Z,1509054898.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:58.908Z,1509054898.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:58.917Z,1509054898.917 [BPC1](ERROR): Failed to parse message.
2017-10-26T21:54:58.917Z,1509054898.917 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T21:54:58.917Z,1509054898.917 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:54:58.917Z,1509054898.917 [BPC1](ERROR): Data Fault
2017-10-26T21:54:58.928Z,1509054898.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:59.014Z,1509054899.014 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:54:59.303Z,1509054899.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:59.350Z,1509054899.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:54:59.697Z,1509054899.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:54:59.730Z,1509054899.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:00.103Z,1509054900.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:00.120Z,1509054900.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:00.271Z,1509054900.271 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:55:00.272Z,1509054900.272 [BPC1] No Fault, FailCount= 1
2017-10-26T21:55:00.509Z,1509054900.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:00.579Z,1509054900.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:00.929Z,1509054900.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:01.016Z,1509054901.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:01.298Z,1509054901.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:01.367Z,1509054901.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:01.707Z,1509054901.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:01.737Z,1509054901.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:02.105Z,1509054902.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:02.155Z,1509054902.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:02.501Z,1509054902.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:02.517Z,1509054902.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:02.977Z,1509054902.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:03.039Z,1509054903.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:03.307Z,1509054903.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:03.352Z,1509054903.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:03.711Z,1509054903.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:03.727Z,1509054903.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:04.104Z,1509054904.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:04.170Z,1509054904.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:04.517Z,1509054904.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:04.533Z,1509054904.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:04.901Z,1509054904.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:05.006Z,1509054905.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:05.312Z,1509054905.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:05.329Z,1509054905.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:05.709Z,1509054905.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:05.726Z,1509054905.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:06.116Z,1509054906.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:06.165Z,1509054906.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:06.512Z,1509054906.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:06.528Z,1509054906.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:06.940Z,1509054906.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:07.044Z,1509054907.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:07.297Z,1509054907.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:07.345Z,1509054907.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:07.708Z,1509054907.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:07.741Z,1509054907.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:08.108Z,1509054908.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:08.158Z,1509054908.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:08.514Z,1509054908.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:08.530Z,1509054908.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:08.954Z,1509054908.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:08.998Z,1509054908.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:09.295Z,1509054909.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:09.343Z,1509054909.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:09.717Z,1509054909.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:09.746Z,1509054909.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:10.105Z,1509054910.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:10.162Z,1509054910.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:10.500Z,1509054910.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:10.534Z,1509054910.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:10.977Z,1509054910.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:11.090Z,1509054911.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:11.304Z,1509054911.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:11.358Z,1509054911.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:11.893Z,1509054911.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:11.957Z,1509054911.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:12.311Z,1509054912.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:12.328Z,1509054912.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:12.700Z,1509054912.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:12.730Z,1509054912.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:13.102Z,1509054913.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:13.161Z,1509054913.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:13.498Z,1509054913.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:13.527Z,1509054913.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:13.901Z,1509054913.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:13.962Z,1509054913.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:14.291Z,1509054914.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:14.324Z,1509054914.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:14.691Z,1509054914.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:14.735Z,1509054914.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:15.093Z,1509054915.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:15.164Z,1509054915.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:15.501Z,1509054915.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:15.529Z,1509054915.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:15.900Z,1509054915.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:15.974Z,1509054915.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:16.301Z,1509054916.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:16.353Z,1509054916.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:16.696Z,1509054916.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:16.737Z,1509054916.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:17.105Z,1509054917.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:17.159Z,1509054917.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:17.496Z,1509054917.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:17.533Z,1509054917.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:17.908Z,1509054917.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:17.926Z,1509054917.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:18.279Z,1509054918.279 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:55:18.308Z,1509054918.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:18.348Z,1509054918.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:18.692Z,1509054918.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:18.746Z,1509054918.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:19.105Z,1509054919.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:19.162Z,1509054919.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:19.502Z,1509054919.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:19.531Z,1509054919.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:19.898Z,1509054919.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:19.930Z,1509054919.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:20.301Z,1509054920.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:20.338Z,1509054920.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:20.703Z,1509054920.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:20.728Z,1509054920.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:21.115Z,1509054921.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:21.136Z,1509054921.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:21.493Z,1509054921.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:21.529Z,1509054921.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:21.894Z,1509054921.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:21.926Z,1509054921.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:22.295Z,1509054922.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:22.345Z,1509054922.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:22.696Z,1509054922.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:22.721Z,1509054922.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:23.104Z,1509054923.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:23.166Z,1509054923.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:23.497Z,1509054923.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:23.525Z,1509054923.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:23.907Z,1509054923.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:23.923Z,1509054923.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:24.289Z,1509054924.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:24.328Z,1509054924.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:24.793Z,1509054924.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:24.829Z,1509054924.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:25.208Z,1509054925.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:25.247Z,1509054925.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:25.596Z,1509054925.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:25.638Z,1509054925.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:26.011Z,1509054926.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:26.027Z,1509054926.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:26.415Z,1509054926.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:26.438Z,1509054926.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:26.801Z,1509054926.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:26.834Z,1509054926.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:27.236Z,1509054927.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:27.295Z,1509054927.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:27.607Z,1509054927.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:27.644Z,1509054927.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:28.007Z,1509054928.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:28.024Z,1509054928.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:28.407Z,1509054928.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:28.424Z,1509054928.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:28.803Z,1509054928.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:28.861Z,1509054928.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:29.257Z,1509054929.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:29.318Z,1509054929.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:29.607Z,1509054929.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:29.660Z,1509054929.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:30.009Z,1509054930.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:30.054Z,1509054930.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:30.399Z,1509054930.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:30.444Z,1509054930.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:30.808Z,1509054930.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:30.882Z,1509054930.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:31.205Z,1509054931.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:31.237Z,1509054931.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:31.656Z,1509054931.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:31.696Z,1509054931.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:31.999Z,1509054931.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:32.036Z,1509054932.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:32.396Z,1509054932.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:32.432Z,1509054932.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:32.800Z,1509054932.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:32.816Z,1509054932.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:33.207Z,1509054933.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:33.245Z,1509054933.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:33.657Z,1509054933.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:33.702Z,1509054933.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:33.998Z,1509054933.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:34.026Z,1509054934.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:34.401Z,1509054934.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:34.438Z,1509054934.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:34.802Z,1509054934.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:34.830Z,1509054934.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:35.200Z,1509054935.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:35.232Z,1509054935.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:35.595Z,1509054935.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:35.649Z,1509054935.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:36.004Z,1509054936.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:36.035Z,1509054936.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:36.413Z,1509054936.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:36.438Z,1509054936.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:36.807Z,1509054936.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:36.839Z,1509054936.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:37.204Z,1509054937.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:37.240Z,1509054937.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:37.603Z,1509054937.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:37.644Z,1509054937.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:38.003Z,1509054938.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:38.035Z,1509054938.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:38.408Z,1509054938.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:38.450Z,1509054938.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:38.809Z,1509054938.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:38.849Z,1509054938.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:39.209Z,1509054939.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:39.225Z,1509054939.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:39.611Z,1509054939.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:39.632Z,1509054939.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:39.998Z,1509054939.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:40.026Z,1509054940.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:40.426Z,1509054940.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:40.448Z,1509054940.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:40.803Z,1509054940.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:40.832Z,1509054940.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:41.208Z,1509054941.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:41.216Z,1509054941.216 [BPC1](ERROR): Failed to parse message.
2017-10-26T21:55:41.217Z,1509054941.217 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T21:55:41.217Z,1509054941.217 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:55:41.217Z,1509054941.217 [BPC1](ERROR): Data Fault
2017-10-26T21:55:41.267Z,1509054941.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:41.336Z,1509054941.336 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:55:41.597Z,1509054941.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:41.633Z,1509054941.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:42.005Z,1509054942.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:42.033Z,1509054942.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:42.406Z,1509054942.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:42.455Z,1509054942.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:42.577Z,1509054942.577 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:55:42.577Z,1509054942.577 [BPC1] No Fault, FailCount= 1
2017-10-26T21:55:42.802Z,1509054942.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:42.880Z,1509054942.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:43.200Z,1509054943.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:43.216Z,1509054943.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:43.619Z,1509054943.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:43.651Z,1509054943.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:44.006Z,1509054944.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:44.057Z,1509054944.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:44.440Z,1509054944.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:44.457Z,1509054944.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:44.812Z,1509054944.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:44.828Z,1509054944.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:45.202Z,1509054945.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:45.240Z,1509054945.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:45.603Z,1509054945.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:45.627Z,1509054945.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:46.007Z,1509054946.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:46.042Z,1509054946.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:46.404Z,1509054946.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:46.419Z,1509054946.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:46.808Z,1509054946.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:46.851Z,1509054946.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:47.200Z,1509054947.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:47.232Z,1509054947.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:47.618Z,1509054947.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:47.652Z,1509054947.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:47.996Z,1509054947.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:48.043Z,1509054948.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:48.399Z,1509054948.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:48.427Z,1509054948.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:48.803Z,1509054948.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:48.832Z,1509054948.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:49.214Z,1509054949.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:49.231Z,1509054949.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:49.612Z,1509054949.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:49.642Z,1509054949.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:50.002Z,1509054950.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:50.033Z,1509054950.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:50.402Z,1509054950.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:50.434Z,1509054950.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:50.796Z,1509054950.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:50.813Z,1509054950.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:51.201Z,1509054951.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:51.218Z,1509054951.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:51.608Z,1509054951.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:51.629Z,1509054951.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:52.008Z,1509054952.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:52.024Z,1509054952.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:52.409Z,1509054952.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:52.436Z,1509054952.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:52.794Z,1509054952.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:52.831Z,1509054952.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:53.206Z,1509054953.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:53.235Z,1509054953.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:53.622Z,1509054953.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:53.639Z,1509054953.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:54.007Z,1509054954.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:54.039Z,1509054954.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:54.402Z,1509054954.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:54.419Z,1509054954.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:54.817Z,1509054954.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:54.890Z,1509054954.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:55.197Z,1509054955.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:55.225Z,1509054955.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:55.602Z,1509054955.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:55.630Z,1509054955.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:56.008Z,1509054956.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:56.064Z,1509054956.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:56.409Z,1509054956.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:56.428Z,1509054956.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:56.818Z,1509054956.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:56.864Z,1509054956.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:57.197Z,1509054957.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:57.237Z,1509054957.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:57.603Z,1509054957.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:57.669Z,1509054957.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:58.005Z,1509054958.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:58.037Z,1509054958.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:58.405Z,1509054958.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:58.451Z,1509054958.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:58.811Z,1509054958.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:58.848Z,1509054958.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:59.207Z,1509054959.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:59.237Z,1509054959.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:55:59.603Z,1509054959.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:55:59.641Z,1509054959.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:00.005Z,1509054960.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:00.021Z,1509054960.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:00.406Z,1509054960.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:00.442Z,1509054960.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:00.810Z,1509054960.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:00.845Z,1509054960.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:01.195Z,1509054961.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:01.232Z,1509054961.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:01.598Z,1509054961.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:01.631Z,1509054961.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:02.001Z,1509054962.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:02.037Z,1509054962.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:02.400Z,1509054962.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:02.442Z,1509054962.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:02.807Z,1509054962.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:02.837Z,1509054962.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:03.207Z,1509054963.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:03.223Z,1509054963.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:03.609Z,1509054963.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:03.625Z,1509054963.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:04.013Z,1509054964.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:04.030Z,1509054964.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:04.417Z,1509054964.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:04.433Z,1509054964.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:04.801Z,1509054964.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:04.829Z,1509054964.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:05.204Z,1509054965.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:05.221Z,1509054965.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:05.604Z,1509054965.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:05.620Z,1509054965.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:06.006Z,1509054966.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:06.022Z,1509054966.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:06.409Z,1509054966.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:06.425Z,1509054966.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:06.809Z,1509054966.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:06.825Z,1509054966.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:07.207Z,1509054967.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:07.245Z,1509054967.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:07.603Z,1509054967.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:07.639Z,1509054967.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:08.010Z,1509054968.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:08.045Z,1509054968.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:08.412Z,1509054968.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:08.428Z,1509054968.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:08.809Z,1509054968.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:08.825Z,1509054968.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:09.195Z,1509054969.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:09.255Z,1509054969.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:09.604Z,1509054969.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:09.641Z,1509054969.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:10.003Z,1509054970.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:10.052Z,1509054970.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:10.406Z,1509054970.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:10.439Z,1509054970.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:10.804Z,1509054970.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:10.927Z,1509054970.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:11.222Z,1509054971.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:11.250Z,1509054971.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:11.628Z,1509054971.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:11.684Z,1509054971.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:12.002Z,1509054972.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:12.042Z,1509054972.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:12.406Z,1509054972.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:12.446Z,1509054972.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:12.802Z,1509054972.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:12.855Z,1509054972.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:13.203Z,1509054973.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:13.237Z,1509054973.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:13.602Z,1509054973.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:13.634Z,1509054973.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:14.003Z,1509054974.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:14.040Z,1509054974.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:14.407Z,1509054974.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:14.432Z,1509054974.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:14.806Z,1509054974.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:14.822Z,1509054974.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:15.208Z,1509054975.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:15.232Z,1509054975.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:15.602Z,1509054975.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:15.626Z,1509054975.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:16.007Z,1509054976.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:16.027Z,1509054976.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:16.396Z,1509054976.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:16.433Z,1509054976.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:16.808Z,1509054976.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:16.824Z,1509054976.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:17.209Z,1509054977.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:17.225Z,1509054977.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:17.596Z,1509054977.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:17.633Z,1509054977.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:18.001Z,1509054978.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:18.029Z,1509054978.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:18.380Z,1509054978.380 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:56:18.400Z,1509054978.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:18.436Z,1509054978.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:18.806Z,1509054978.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:18.831Z,1509054978.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:19.213Z,1509054979.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:19.242Z,1509054979.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:19.617Z,1509054979.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:19.655Z,1509054979.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:20.010Z,1509054980.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:20.027Z,1509054980.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:20.410Z,1509054980.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:20.436Z,1509054980.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:20.818Z,1509054980.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:20.834Z,1509054980.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:21.219Z,1509054981.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:21.236Z,1509054981.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:21.603Z,1509054981.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:21.632Z,1509054981.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:21.995Z,1509054981.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:22.032Z,1509054982.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:22.404Z,1509054982.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:22.434Z,1509054982.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:22.802Z,1509054982.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:22.827Z,1509054982.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:23.291Z,1509054983.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:23.358Z,1509054983.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:23.686Z,1509054983.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:23.714Z,1509054983.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:24.082Z,1509054984.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:24.186Z,1509054984.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:24.485Z,1509054984.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:24.514Z,1509054984.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:24.937Z,1509054984.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:25.012Z,1509054985.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:25.293Z,1509054985.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:25.319Z,1509054985.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:25.683Z,1509054985.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:25.737Z,1509054985.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:26.086Z,1509054986.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:26.164Z,1509054986.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:26.483Z,1509054986.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:26.503Z,1509054986.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:26.888Z,1509054986.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:26.905Z,1509054986.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:27.284Z,1509054987.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:27.330Z,1509054987.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:27.688Z,1509054987.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:27.719Z,1509054987.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:28.082Z,1509054988.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:28.098Z,1509054988.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:28.486Z,1509054988.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:28.501Z,1509054988.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:28.945Z,1509054988.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:28.997Z,1509054988.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:29.298Z,1509054989.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:29.319Z,1509054989.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:29.693Z,1509054989.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:29.708Z,1509054989.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:30.084Z,1509054990.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:30.123Z,1509054990.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:30.484Z,1509054990.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:30.514Z,1509054990.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:30.939Z,1509054990.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:30.983Z,1509054990.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:31.279Z,1509054991.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:31.298Z,1509054991.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:31.689Z,1509054991.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:31.711Z,1509054991.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:32.091Z,1509054992.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:32.108Z,1509054992.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:32.495Z,1509054992.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:32.511Z,1509054992.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:32.893Z,1509054992.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:32.958Z,1509054992.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:33.289Z,1509054993.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:33.305Z,1509054993.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:33.689Z,1509054993.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:33.705Z,1509054993.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:34.094Z,1509054994.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:34.111Z,1509054994.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:34.490Z,1509054994.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:34.506Z,1509054994.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:34.912Z,1509054994.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:34.993Z,1509054994.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:35.292Z,1509054995.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:35.327Z,1509054995.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:35.682Z,1509054995.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:35.707Z,1509054995.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:36.077Z,1509054996.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:36.110Z,1509054996.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:36.501Z,1509054996.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:36.547Z,1509054996.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:36.930Z,1509054996.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:37.015Z,1509054997.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:37.296Z,1509054997.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:37.312Z,1509054997.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:37.693Z,1509054997.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:37.722Z,1509054997.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:38.083Z,1509054998.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:38.159Z,1509054998.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:38.481Z,1509054998.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:38.514Z,1509054998.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:38.918Z,1509054998.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:39.001Z,1509054999.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:39.286Z,1509054999.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:39.301Z,1509054999.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:39.685Z,1509054999.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:39.736Z,1509054999.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:40.080Z,1509055000.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:40.149Z,1509055000.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:40.496Z,1509055000.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:40.528Z,1509055000.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:40.889Z,1509055000.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:40.905Z,1509055000.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:41.287Z,1509055001.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:41.303Z,1509055001.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:41.693Z,1509055001.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:41.709Z,1509055001.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:42.089Z,1509055002.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:42.105Z,1509055002.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:42.495Z,1509055002.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:42.514Z,1509055002.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:42.921Z,1509055002.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:42.986Z,1509055002.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:43.293Z,1509055003.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:43.331Z,1509055003.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:43.680Z,1509055003.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:43.713Z,1509055003.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:44.090Z,1509055004.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:44.107Z,1509055004.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:44.487Z,1509055004.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:44.519Z,1509055004.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:44.890Z,1509055004.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:44.988Z,1509055004.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:45.494Z,1509055005.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:45.512Z,1509055005.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:45.893Z,1509055005.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:45.909Z,1509055005.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:46.292Z,1509055006.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:46.309Z,1509055006.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:46.701Z,1509055006.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:46.753Z,1509055006.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:47.095Z,1509055007.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:47.112Z,1509055007.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:47.497Z,1509055007.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:47.513Z,1509055007.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:47.887Z,1509055007.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:47.918Z,1509055007.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:48.284Z,1509055008.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:48.329Z,1509055008.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:48.699Z,1509055008.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:48.737Z,1509055008.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:49.090Z,1509055009.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:49.115Z,1509055009.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:49.492Z,1509055009.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:49.516Z,1509055009.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:49.897Z,1509055009.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:49.913Z,1509055009.913 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:49.913Z,1509055009.913 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 43
2017-10-26T21:56:49.914Z,1509055009.914 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:56:49.918Z,1509055009.918 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:49.918Z,1509055009.918 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 43
2017-10-26T21:56:49.918Z,1509055009.918 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:56:50.014Z,1509055010.014 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:56:50.014Z,1509055010.014 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:56:50.279Z,1509055010.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:50.378Z,1509055010.378 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:56:50.379Z,1509055010.379 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 43
2017-10-26T21:56:50.379Z,1509055010.379 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:56:50.379Z,1509055010.379 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 43
2017-10-26T21:56:50.687Z,1509055010.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:50.723Z,1509055010.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:56:50.724Z,1509055010.724 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:56:50.724Z,1509055010.724 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:56:50.728Z,1509055010.728 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:56:50.729Z,1509055010.729 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:56:50.729Z,1509055010.729 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:56:51.107Z,1509055011.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:51.172Z,1509055011.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:51.493Z,1509055011.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:51.524Z,1509055011.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:51.889Z,1509055011.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:51.914Z,1509055011.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:52.295Z,1509055012.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:52.371Z,1509055012.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:52.695Z,1509055012.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:52.745Z,1509055012.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:53.085Z,1509055013.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:53.108Z,1509055013.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:53.499Z,1509055013.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:53.516Z,1509055013.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:53.898Z,1509055013.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:53.919Z,1509055013.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:54.296Z,1509055014.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:54.312Z,1509055014.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:54.703Z,1509055014.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:54.719Z,1509055014.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:55.082Z,1509055015.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:55.126Z,1509055015.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:55.485Z,1509055015.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:55.508Z,1509055015.508 [BPC1](ERROR): Failed to receive battery data
2017-10-26T21:56:55.508Z,1509055015.508 [BPC1] Communications Fault, FailCount= 1
2017-10-26T21:56:55.508Z,1509055015.508 [BPC1](ERROR): Communications Fault
2017-10-26T21:56:55.517Z,1509055015.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:55.611Z,1509055015.611 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T21:56:55.888Z,1509055015.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:55.921Z,1509055015.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:56.290Z,1509055016.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:56.306Z,1509055016.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:56.691Z,1509055016.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:56.707Z,1509055016.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:56.837Z,1509055016.837 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:56:56.838Z,1509055016.838 [BPC1] No Fault, FailCount= 1
2017-10-26T21:56:57.097Z,1509055017.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:57.199Z,1509055017.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:57.497Z,1509055017.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:57.513Z,1509055017.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:57.898Z,1509055017.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:57.931Z,1509055017.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:58.287Z,1509055018.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:58.316Z,1509055018.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:58.682Z,1509055018.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:58.736Z,1509055018.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:59.113Z,1509055019.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:59.169Z,1509055019.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:59.490Z,1509055019.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:59.535Z,1509055019.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:56:59.898Z,1509055019.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:56:59.935Z,1509055019.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:00.288Z,1509055020.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:00.317Z,1509055020.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:00.696Z,1509055020.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:00.712Z,1509055020.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:01.090Z,1509055021.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:01.105Z,1509055021.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:01.480Z,1509055021.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:01.517Z,1509055021.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:01.881Z,1509055021.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:01.933Z,1509055021.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:02.286Z,1509055022.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:02.318Z,1509055022.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:02.684Z,1509055022.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:02.720Z,1509055022.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:03.087Z,1509055023.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:03.158Z,1509055023.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:03.488Z,1509055023.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:03.509Z,1509055023.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:03.891Z,1509055023.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:03.913Z,1509055023.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:04.297Z,1509055024.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:04.313Z,1509055024.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:04.697Z,1509055024.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:04.739Z,1509055024.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:05.082Z,1509055025.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:05.150Z,1509055025.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:05.496Z,1509055025.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:05.529Z,1509055025.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:05.897Z,1509055025.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:05.914Z,1509055025.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:06.295Z,1509055026.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:06.313Z,1509055026.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:06.699Z,1509055026.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:06.716Z,1509055026.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:07.099Z,1509055027.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:07.164Z,1509055027.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:07.488Z,1509055027.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:07.517Z,1509055027.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:07.886Z,1509055027.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:07.923Z,1509055027.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:08.286Z,1509055028.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:08.323Z,1509055028.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:08.686Z,1509055028.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:08.702Z,1509055028.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:09.092Z,1509055029.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:09.144Z,1509055029.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:09.488Z,1509055029.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:09.526Z,1509055029.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:09.885Z,1509055029.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:09.918Z,1509055029.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:10.290Z,1509055030.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:10.336Z,1509055030.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:10.691Z,1509055030.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:10.732Z,1509055030.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:11.087Z,1509055031.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:11.109Z,1509055031.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:11.496Z,1509055031.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:11.517Z,1509055031.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:11.893Z,1509055031.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:11.941Z,1509055031.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:12.290Z,1509055032.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:12.316Z,1509055032.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:12.693Z,1509055032.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:12.746Z,1509055032.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:13.091Z,1509055033.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:13.152Z,1509055033.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:13.491Z,1509055033.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:13.543Z,1509055033.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:13.896Z,1509055033.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:13.913Z,1509055033.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:14.294Z,1509055034.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:14.311Z,1509055034.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:14.698Z,1509055034.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:14.714Z,1509055034.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:15.088Z,1509055035.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:15.133Z,1509055035.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:15.486Z,1509055035.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:15.519Z,1509055035.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:15.900Z,1509055035.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:15.944Z,1509055035.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:16.288Z,1509055036.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:16.304Z,1509055036.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:16.687Z,1509055036.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:16.703Z,1509055036.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:17.094Z,1509055037.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:17.133Z,1509055037.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:17.486Z,1509055037.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:17.510Z,1509055037.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:17.897Z,1509055037.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:17.917Z,1509055037.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:18.299Z,1509055038.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:18.319Z,1509055038.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:18.684Z,1509055038.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:18.712Z,1509055038.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:19.165Z,1509055039.165 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:57:19.206Z,1509055039.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:19.237Z,1509055039.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:19.593Z,1509055039.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:19.623Z,1509055039.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:19.991Z,1509055039.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:20.028Z,1509055040.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:20.394Z,1509055040.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:20.434Z,1509055040.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:20.796Z,1509055040.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:20.829Z,1509055040.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:21.195Z,1509055041.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:21.236Z,1509055041.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:21.603Z,1509055041.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:21.640Z,1509055041.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:21.998Z,1509055041.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:22.015Z,1509055042.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:22.404Z,1509055042.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:22.421Z,1509055042.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:22.807Z,1509055042.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:22.824Z,1509055042.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:23.208Z,1509055043.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:23.230Z,1509055043.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:23.589Z,1509055043.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:23.628Z,1509055043.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:23.992Z,1509055043.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:24.021Z,1509055044.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:24.395Z,1509055044.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:24.424Z,1509055044.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:24.796Z,1509055044.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:24.812Z,1509055044.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:25.194Z,1509055045.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:25.280Z,1509055045.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:25.597Z,1509055045.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:25.613Z,1509055045.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:25.996Z,1509055045.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:26.025Z,1509055046.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:26.402Z,1509055046.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:26.460Z,1509055046.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:26.798Z,1509055046.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:26.814Z,1509055046.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:27.200Z,1509055047.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:27.260Z,1509055047.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:27.599Z,1509055047.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:27.658Z,1509055047.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:28.002Z,1509055048.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:28.019Z,1509055048.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:28.422Z,1509055048.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:28.445Z,1509055048.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:28.790Z,1509055048.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:28.819Z,1509055048.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:29.198Z,1509055049.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:29.237Z,1509055049.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:29.604Z,1509055049.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:29.621Z,1509055049.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:29.998Z,1509055049.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:30.015Z,1509055050.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:30.401Z,1509055050.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:30.436Z,1509055050.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:30.798Z,1509055050.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:30.827Z,1509055050.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:31.320Z,1509055051.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:31.392Z,1509055051.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:31.695Z,1509055051.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:31.728Z,1509055051.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:32.097Z,1509055052.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:32.115Z,1509055052.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:32.504Z,1509055052.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:32.521Z,1509055052.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:32.908Z,1509055052.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:32.924Z,1509055052.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:33.299Z,1509055053.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:33.317Z,1509055053.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:33.714Z,1509055053.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:33.739Z,1509055053.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:34.091Z,1509055054.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:34.143Z,1509055054.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:34.494Z,1509055054.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:34.534Z,1509055054.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:34.895Z,1509055054.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:34.932Z,1509055054.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:35.289Z,1509055055.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:35.310Z,1509055055.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:35.702Z,1509055055.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:35.731Z,1509055055.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:36.100Z,1509055056.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:36.117Z,1509055056.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:36.510Z,1509055056.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:36.532Z,1509055056.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:36.887Z,1509055056.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:36.981Z,1509055056.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:37.300Z,1509055057.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:37.331Z,1509055057.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:37.694Z,1509055057.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:37.723Z,1509055057.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:38.093Z,1509055058.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:38.115Z,1509055058.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:38.505Z,1509055058.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:38.549Z,1509055058.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:38.899Z,1509055058.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:39.006Z,1509055059.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:39.295Z,1509055059.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:39.346Z,1509055059.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:39.707Z,1509055059.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:39.728Z,1509055059.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:40.102Z,1509055060.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:40.165Z,1509055060.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:40.485Z,1509055060.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:40.525Z,1509055060.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:40.890Z,1509055060.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:40.940Z,1509055060.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:41.290Z,1509055061.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:41.345Z,1509055061.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:41.688Z,1509055061.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:41.725Z,1509055061.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:42.088Z,1509055062.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:42.156Z,1509055062.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:42.489Z,1509055062.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:42.505Z,1509055062.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:42.893Z,1509055062.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:42.948Z,1509055062.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:43.290Z,1509055063.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:43.314Z,1509055063.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:43.705Z,1509055063.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:43.721Z,1509055063.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:44.097Z,1509055064.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:44.112Z,1509055064.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:44.505Z,1509055064.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:44.521Z,1509055064.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:44.884Z,1509055064.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:44.920Z,1509055064.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:45.325Z,1509055065.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:45.387Z,1509055065.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:45.704Z,1509055065.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:45.726Z,1509055065.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:46.088Z,1509055066.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:46.139Z,1509055066.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:46.493Z,1509055066.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:46.524Z,1509055066.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:46.887Z,1509055066.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:46.928Z,1509055066.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:47.291Z,1509055067.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:47.334Z,1509055067.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:47.701Z,1509055067.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:47.735Z,1509055067.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:48.086Z,1509055068.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:48.140Z,1509055068.140 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:48.491Z,1509055068.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:48.523Z,1509055068.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:48.898Z,1509055068.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:48.933Z,1509055068.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:49.290Z,1509055069.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:49.306Z,1509055069.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:49.703Z,1509055069.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:49.736Z,1509055069.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:50.095Z,1509055070.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:50.112Z,1509055070.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:50.501Z,1509055070.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:50.518Z,1509055070.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:50.899Z,1509055070.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:51.012Z,1509055071.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:51.296Z,1509055071.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:51.313Z,1509055071.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:51.686Z,1509055071.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:51.723Z,1509055071.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:52.095Z,1509055072.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:52.167Z,1509055072.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:52.490Z,1509055072.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:52.528Z,1509055072.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:52.898Z,1509055072.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:52.994Z,1509055072.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:53.289Z,1509055073.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:53.305Z,1509055073.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:53.697Z,1509055073.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:53.733Z,1509055073.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:54.094Z,1509055074.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:54.110Z,1509055074.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:54.497Z,1509055074.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:54.513Z,1509055074.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:54.926Z,1509055074.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:55.049Z,1509055075.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:55.296Z,1509055075.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:55.334Z,1509055075.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:55.693Z,1509055075.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:55.755Z,1509055075.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:56.097Z,1509055076.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:56.158Z,1509055076.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:56.497Z,1509055076.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:56.549Z,1509055076.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:56.912Z,1509055076.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:57.037Z,1509055077.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:57.290Z,1509055077.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:57.320Z,1509055077.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:57.688Z,1509055077.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:57.723Z,1509055077.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:58.091Z,1509055078.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:58.108Z,1509055078.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:58.498Z,1509055078.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:58.515Z,1509055078.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:58.943Z,1509055078.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:58.998Z,1509055078.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:59.286Z,1509055079.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:59.307Z,1509055079.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:57:59.699Z,1509055079.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:57:59.735Z,1509055079.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:00.092Z,1509055080.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:00.149Z,1509055080.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:00.482Z,1509055080.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:00.510Z,1509055080.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:00.982Z,1509055080.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:01.041Z,1509055081.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:01.296Z,1509055081.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:01.332Z,1509055081.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:01.691Z,1509055081.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:01.707Z,1509055081.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:02.097Z,1509055082.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:02.113Z,1509055082.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:02.493Z,1509055082.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:02.508Z,1509055082.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:02.919Z,1509055082.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:02.981Z,1509055082.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:03.288Z,1509055083.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:03.303Z,1509055083.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:03.697Z,1509055083.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:03.713Z,1509055083.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:04.100Z,1509055084.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:04.150Z,1509055084.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:04.490Z,1509055084.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:04.532Z,1509055084.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:04.954Z,1509055084.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:05.019Z,1509055085.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:05.290Z,1509055085.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:05.335Z,1509055085.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:05.689Z,1509055085.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:05.714Z,1509055085.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:06.100Z,1509055086.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:06.152Z,1509055086.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:06.498Z,1509055086.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:06.522Z,1509055086.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:06.935Z,1509055086.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:07.004Z,1509055087.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:07.294Z,1509055087.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:07.310Z,1509055087.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:07.693Z,1509055087.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:07.710Z,1509055087.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:08.107Z,1509055088.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:08.178Z,1509055088.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:08.484Z,1509055088.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:08.523Z,1509055088.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:08.951Z,1509055088.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:09.000Z,1509055089.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:09.297Z,1509055089.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:09.390Z,1509055089.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:09.686Z,1509055089.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:09.720Z,1509055089.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:10.093Z,1509055090.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:10.206Z,1509055090.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:10.495Z,1509055090.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:10.519Z,1509055090.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:10.884Z,1509055090.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:11.002Z,1509055091.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:11.303Z,1509055091.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:11.376Z,1509055091.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:11.687Z,1509055091.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:11.716Z,1509055091.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:12.094Z,1509055092.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:12.129Z,1509055092.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:12.489Z,1509055092.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:12.517Z,1509055092.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:12.934Z,1509055092.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:12.991Z,1509055092.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:13.295Z,1509055093.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:13.341Z,1509055093.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:13.697Z,1509055093.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:13.714Z,1509055093.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:14.098Z,1509055094.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:14.114Z,1509055094.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:14.494Z,1509055094.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:14.510Z,1509055094.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:14.911Z,1509055094.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:14.968Z,1509055094.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:15.291Z,1509055095.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:15.323Z,1509055095.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:15.695Z,1509055095.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:15.748Z,1509055095.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:16.092Z,1509055096.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:16.112Z,1509055096.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:16.503Z,1509055096.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:16.519Z,1509055096.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:16.940Z,1509055096.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:17.000Z,1509055097.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:17.288Z,1509055097.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:17.304Z,1509055097.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:17.699Z,1509055097.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:17.715Z,1509055097.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:18.093Z,1509055098.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:18.109Z,1509055098.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:18.502Z,1509055098.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:18.520Z,1509055098.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:18.948Z,1509055098.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:18.992Z,1509055098.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:19.268Z,1509055099.268 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:58:19.301Z,1509055099.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:19.330Z,1509055099.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:19.693Z,1509055099.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:19.714Z,1509055099.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:20.086Z,1509055100.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:20.135Z,1509055100.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:20.491Z,1509055100.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:20.524Z,1509055100.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:20.912Z,1509055100.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:20.979Z,1509055100.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:21.299Z,1509055101.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:21.350Z,1509055101.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:21.697Z,1509055101.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:21.725Z,1509055101.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:22.096Z,1509055102.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:22.112Z,1509055102.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:22.513Z,1509055102.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:22.538Z,1509055102.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:22.914Z,1509055102.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:23.000Z,1509055103.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:23.287Z,1509055103.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:23.367Z,1509055103.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:23.693Z,1509055103.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:23.720Z,1509055103.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:24.097Z,1509055104.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:24.113Z,1509055104.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:24.495Z,1509055104.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:24.522Z,1509055104.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:24.939Z,1509055104.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:24.970Z,1509055104.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:25.291Z,1509055105.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:25.319Z,1509055105.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:25.702Z,1509055105.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:25.718Z,1509055105.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:26.098Z,1509055106.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:26.114Z,1509055106.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:26.495Z,1509055106.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:26.510Z,1509055106.510 [BPC1](ERROR): Failed to receive battery data
2017-10-26T21:58:26.510Z,1509055106.510 [BPC1] Communications Fault, FailCount= 1
2017-10-26T21:58:26.510Z,1509055106.510 [BPC1](ERROR): Communications Fault
2017-10-26T21:58:26.532Z,1509055106.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:26.569Z,1509055106.569 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T21:58:26.899Z,1509055106.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:26.981Z,1509055106.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:27.292Z,1509055107.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:27.343Z,1509055107.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:27.693Z,1509055107.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:27.708Z,1509055107.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:27.754Z,1509055107.754 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:58:27.754Z,1509055107.754 [BPC1] No Fault, FailCount= 1
2017-10-26T21:58:28.092Z,1509055108.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:28.212Z,1509055108.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:28.500Z,1509055108.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:28.516Z,1509055108.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:28.933Z,1509055108.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:29.011Z,1509055109.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:29.287Z,1509055109.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:29.341Z,1509055109.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:29.694Z,1509055109.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:29.726Z,1509055109.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:30.091Z,1509055110.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:30.158Z,1509055110.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:30.506Z,1509055110.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:30.543Z,1509055110.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:30.915Z,1509055110.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:30.979Z,1509055110.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:31.285Z,1509055111.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:31.321Z,1509055111.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:31.692Z,1509055111.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:31.729Z,1509055111.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:32.091Z,1509055112.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:32.107Z,1509055112.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:32.500Z,1509055112.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:32.561Z,1509055112.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:32.902Z,1509055112.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:32.918Z,1509055112.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:33.291Z,1509055113.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:33.322Z,1509055113.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:33.700Z,1509055113.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:33.728Z,1509055113.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:34.089Z,1509055114.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:34.105Z,1509055114.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:34.490Z,1509055114.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:34.508Z,1509055114.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:35.013Z,1509055115.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:35.060Z,1509055115.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:35.392Z,1509055115.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:35.430Z,1509055115.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:35.803Z,1509055115.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:35.835Z,1509055115.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:36.205Z,1509055116.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:36.235Z,1509055116.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:36.613Z,1509055116.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:36.653Z,1509055116.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:37.017Z,1509055117.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:37.035Z,1509055117.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:37.403Z,1509055117.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:37.439Z,1509055117.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:37.811Z,1509055117.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:37.860Z,1509055117.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:38.194Z,1509055118.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:38.251Z,1509055118.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:38.599Z,1509055118.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:38.643Z,1509055118.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:39.021Z,1509055119.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:39.042Z,1509055119.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:39.411Z,1509055119.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:39.452Z,1509055119.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:39.805Z,1509055119.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:39.822Z,1509055119.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:40.208Z,1509055120.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:40.226Z,1509055120.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:40.615Z,1509055120.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:40.655Z,1509055120.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:40.995Z,1509055120.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:41.024Z,1509055121.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:41.400Z,1509055121.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:41.447Z,1509055121.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:41.800Z,1509055121.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:41.844Z,1509055121.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:42.211Z,1509055122.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:42.241Z,1509055122.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:42.604Z,1509055122.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:42.640Z,1509055122.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:42.994Z,1509055122.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:43.036Z,1509055123.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:43.411Z,1509055123.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:43.475Z,1509055123.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:43.802Z,1509055123.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:43.840Z,1509055123.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:44.203Z,1509055124.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:44.234Z,1509055124.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:44.605Z,1509055124.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:44.654Z,1509055124.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:44.000Z,1509055125.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:45.035Z,1509055125.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:45.417Z,1509055125.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:45.479Z,1509055125.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:45.817Z,1509055125.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:45.871Z,1509055125.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:46.215Z,1509055126.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:46.251Z,1509055126.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:46.602Z,1509055126.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:46.647Z,1509055126.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:47.000Z,1509055127.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:47.037Z,1509055127.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:47.406Z,1509055127.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:47.437Z,1509055127.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:47.814Z,1509055127.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:47.858Z,1509055127.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:48.202Z,1509055128.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:48.243Z,1509055128.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:48.605Z,1509055128.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:48.628Z,1509055128.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:49.011Z,1509055129.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:49.034Z,1509055129.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:49.413Z,1509055129.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:49.432Z,1509055129.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:49.797Z,1509055129.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:49.836Z,1509055129.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:50.199Z,1509055130.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:50.230Z,1509055130.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:50.605Z,1509055130.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:50.634Z,1509055130.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:51.023Z,1509055131.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:51.042Z,1509055131.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:51.407Z,1509055131.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:51.435Z,1509055131.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:51.815Z,1509055131.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:51.856Z,1509055131.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:52.208Z,1509055132.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:52.241Z,1509055132.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:52.607Z,1509055132.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:52.626Z,1509055132.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:53.014Z,1509055133.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:53.060Z,1509055133.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:53.397Z,1509055133.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:53.440Z,1509055133.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:53.802Z,1509055133.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:53.831Z,1509055133.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:54.201Z,1509055134.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:54.246Z,1509055134.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:54.613Z,1509055134.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:54.674Z,1509055134.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:55.021Z,1509055135.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:55.062Z,1509055135.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:55.411Z,1509055135.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:55.444Z,1509055135.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:55.808Z,1509055135.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:55.828Z,1509055135.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:56.207Z,1509055136.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:56.223Z,1509055136.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:56.609Z,1509055136.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:56.634Z,1509055136.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:57.013Z,1509055137.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:57.077Z,1509055137.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:57.405Z,1509055137.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:57.477Z,1509055137.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:57.791Z,1509055137.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:57.808Z,1509055137.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:58.200Z,1509055138.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:58.217Z,1509055138.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:58.611Z,1509055138.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:58.666Z,1509055138.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:59.062Z,1509055139.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:59.110Z,1509055139.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:59.408Z,1509055139.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:59.480Z,1509055139.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:58:59.813Z,1509055139.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:58:59.888Z,1509055139.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:00.435Z,1509055140.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:00.451Z,1509055140.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:00.852Z,1509055140.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:00.909Z,1509055140.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:01.250Z,1509055141.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:01.271Z,1509055141.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:01.648Z,1509055141.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:01.672Z,1509055141.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:02.049Z,1509055142.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:02.071Z,1509055142.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:02.441Z,1509055142.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:02.465Z,1509055142.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:02.840Z,1509055142.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:02.857Z,1509055142.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:03.253Z,1509055143.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:03.269Z,1509055143.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:03.647Z,1509055143.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:03.664Z,1509055143.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:04.049Z,1509055144.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:04.081Z,1509055144.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:04.441Z,1509055144.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:04.474Z,1509055144.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:04.838Z,1509055144.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:04.854Z,1509055144.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:05.249Z,1509055145.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:05.273Z,1509055145.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:05.646Z,1509055145.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:05.662Z,1509055145.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:06.052Z,1509055146.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:06.068Z,1509055146.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:06.440Z,1509055146.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:06.487Z,1509055146.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:06.839Z,1509055146.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:06.868Z,1509055146.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:07.243Z,1509055147.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:07.259Z,1509055147.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:07.643Z,1509055147.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:07.667Z,1509055147.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:08.045Z,1509055148.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:08.061Z,1509055148.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:08.438Z,1509055148.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:08.476Z,1509055148.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:08.836Z,1509055148.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:08.873Z,1509055148.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:09.241Z,1509055149.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:09.273Z,1509055149.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:09.638Z,1509055149.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:09.659Z,1509055149.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:10.046Z,1509055150.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:10.071Z,1509055150.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:10.441Z,1509055150.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:10.501Z,1509055150.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:10.845Z,1509055150.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:10.922Z,1509055150.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:11.251Z,1509055151.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:11.291Z,1509055151.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:11.644Z,1509055151.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:11.699Z,1509055151.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:12.047Z,1509055152.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:12.064Z,1509055152.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:12.431Z,1509055152.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:12.471Z,1509055152.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:12.840Z,1509055152.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:12.909Z,1509055152.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:13.267Z,1509055153.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:13.287Z,1509055153.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:13.645Z,1509055153.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:13.698Z,1509055153.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:14.039Z,1509055154.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:14.098Z,1509055154.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:14.446Z,1509055154.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:14.462Z,1509055154.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:14.845Z,1509055154.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:14.862Z,1509055154.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:15.261Z,1509055155.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:15.283Z,1509055155.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:15.640Z,1509055155.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:15.668Z,1509055155.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:16.041Z,1509055156.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:16.057Z,1509055156.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:16.445Z,1509055156.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:16.461Z,1509055156.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:16.843Z,1509055156.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:16.868Z,1509055156.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:17.244Z,1509055157.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:17.265Z,1509055157.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:17.635Z,1509055157.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:17.671Z,1509055157.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:18.049Z,1509055158.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:18.065Z,1509055158.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:18.441Z,1509055158.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:18.470Z,1509055158.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:18.833Z,1509055158.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:18.913Z,1509055158.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:19.213Z,1509055159.213 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T21:59:19.247Z,1509055159.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:19.263Z,1509055159.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:19.653Z,1509055159.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:19.669Z,1509055159.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:20.050Z,1509055160.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:20.066Z,1509055160.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:20.436Z,1509055160.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:20.465Z,1509055160.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:20.837Z,1509055160.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:20.877Z,1509055160.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:21.247Z,1509055161.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:21.264Z,1509055161.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:21.648Z,1509055161.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:21.664Z,1509055161.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:22.044Z,1509055162.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:22.061Z,1509055162.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:22.446Z,1509055162.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:22.479Z,1509055162.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:22.834Z,1509055162.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:22.865Z,1509055162.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:23.248Z,1509055163.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:23.273Z,1509055163.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:23.644Z,1509055163.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:23.677Z,1509055163.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:24.035Z,1509055164.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:24.044Z,1509055164.044 [BPC1](ERROR): Failed to parse message.
2017-10-26T21:59:24.044Z,1509055164.044 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T21:59:24.044Z,1509055164.044 [BPC1] Data Fault, FailCount= 1
2017-10-26T21:59:24.044Z,1509055164.044 [BPC1](ERROR): Data Fault
2017-10-26T21:59:24.053Z,1509055164.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:24.190Z,1509055164.190 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T21:59:24.447Z,1509055164.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:24.489Z,1509055164.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:24.848Z,1509055164.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:24.864Z,1509055164.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:25.235Z,1509055165.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:25.272Z,1509055165.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:25.319Z,1509055165.319 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T21:59:25.319Z,1509055165.319 [BPC1] No Fault, FailCount= 1
2017-10-26T21:59:25.647Z,1509055165.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:25.741Z,1509055165.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:26.037Z,1509055166.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:26.053Z,1509055166.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:26.440Z,1509055166.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:26.479Z,1509055166.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:26.849Z,1509055166.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:26.907Z,1509055166.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:27.239Z,1509055167.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:27.275Z,1509055167.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:27.644Z,1509055167.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:27.676Z,1509055167.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:28.040Z,1509055168.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:28.071Z,1509055168.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:28.440Z,1509055168.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:28.478Z,1509055168.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:28.841Z,1509055168.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:28.856Z,1509055168.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:29.243Z,1509055169.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:29.259Z,1509055169.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:29.646Z,1509055169.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:29.688Z,1509055169.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:30.040Z,1509055170.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:30.056Z,1509055170.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:30.444Z,1509055170.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:30.460Z,1509055170.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:30.836Z,1509055170.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:30.869Z,1509055170.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:31.293Z,1509055171.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:31.342Z,1509055171.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:31.647Z,1509055171.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:31.664Z,1509055171.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:32.044Z,1509055172.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:32.072Z,1509055172.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:32.449Z,1509055172.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:32.476Z,1509055172.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:32.933Z,1509055172.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:32.981Z,1509055172.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:33.340Z,1509055173.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:33.369Z,1509055173.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:33.764Z,1509055173.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:33.789Z,1509055173.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:34.150Z,1509055174.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:34.189Z,1509055174.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:34.546Z,1509055174.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:34.586Z,1509055174.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:34.942Z,1509055174.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:34.958Z,1509055174.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:35.345Z,1509055175.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:35.362Z,1509055175.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:35.740Z,1509055175.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:35.791Z,1509055175.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:36.174Z,1509055176.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:36.190Z,1509055176.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:36.541Z,1509055176.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:36.588Z,1509055176.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:37.009Z,1509055177.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:37.052Z,1509055177.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:37.349Z,1509055177.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:37.397Z,1509055177.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:37.755Z,1509055177.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:37.793Z,1509055177.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:38.155Z,1509055178.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:38.224Z,1509055178.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:38.536Z,1509055178.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:38.597Z,1509055178.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:39.014Z,1509055179.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:39.062Z,1509055179.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:39.341Z,1509055179.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:39.394Z,1509055179.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:39.747Z,1509055179.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:39.811Z,1509055179.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:40.163Z,1509055180.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:40.190Z,1509055180.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:40.541Z,1509055180.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:40.596Z,1509055180.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:40.953Z,1509055180.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:41.064Z,1509055181.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:41.346Z,1509055181.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:41.421Z,1509055181.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:41.742Z,1509055181.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:41.790Z,1509055181.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:42.175Z,1509055182.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:42.192Z,1509055182.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:42.547Z,1509055182.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:42.597Z,1509055182.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:42.947Z,1509055182.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:43.064Z,1509055183.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:43.346Z,1509055183.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:43.363Z,1509055183.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:43.752Z,1509055183.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:43.795Z,1509055183.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:44.149Z,1509055184.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:44.180Z,1509055184.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:44.538Z,1509055184.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:44.574Z,1509055184.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:44.952Z,1509055184.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:44.993Z,1509055184.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:45.335Z,1509055185.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:45.395Z,1509055185.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:45.744Z,1509055185.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:45.781Z,1509055185.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:46.167Z,1509055186.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:46.207Z,1509055186.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:46.537Z,1509055186.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:46.562Z,1509055186.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:47.049Z,1509055187.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:47.096Z,1509055187.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:47.470Z,1509055187.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:47.495Z,1509055187.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:47.829Z,1509055187.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:47.857Z,1509055187.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:48.248Z,1509055188.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:48.276Z,1509055188.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:48.642Z,1509055188.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:48.667Z,1509055188.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:49.024Z,1509055189.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:49.092Z,1509055189.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:49.434Z,1509055189.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:49.469Z,1509055189.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:49.831Z,1509055189.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:49.866Z,1509055189.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:50.232Z,1509055190.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:50.258Z,1509055190.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:50.637Z,1509055190.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:50.674Z,1509055190.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:51.047Z,1509055191.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:51.084Z,1509055191.084 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:51.084Z,1509055191.084 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 44
2017-10-26T21:59:51.084Z,1509055191.084 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T21:59:51.090Z,1509055191.090 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:51.090Z,1509055191.090 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 44
2017-10-26T21:59:51.090Z,1509055191.090 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T21:59:51.153Z,1509055191.153 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T21:59:51.153Z,1509055191.153 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T21:59:51.436Z,1509055191.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:51.498Z,1509055191.498 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T21:59:51.498Z,1509055191.498 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 44
2017-10-26T21:59:51.499Z,1509055191.499 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T21:59:51.499Z,1509055191.499 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 44
2017-10-26T21:59:51.830Z,1509055191.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:51.889Z,1509055191.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T21:59:51.889Z,1509055191.889 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:59:51.889Z,1509055191.889 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:59:51.896Z,1509055191.896 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T21:59:51.896Z,1509055191.896 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T21:59:51.897Z,1509055191.897 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T21:59:52.221Z,1509055192.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:52.258Z,1509055192.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:52.630Z,1509055192.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:52.663Z,1509055192.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:53.043Z,1509055193.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:53.093Z,1509055193.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:53.437Z,1509055193.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:53.454Z,1509055193.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:53.844Z,1509055193.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:53.861Z,1509055193.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:54.239Z,1509055194.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:54.293Z,1509055194.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:54.640Z,1509055194.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:54.656Z,1509055194.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:55.048Z,1509055195.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:55.100Z,1509055195.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:55.427Z,1509055195.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:55.456Z,1509055195.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:55.823Z,1509055195.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:55.873Z,1509055195.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:56.224Z,1509055196.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:56.261Z,1509055196.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:56.634Z,1509055196.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:56.660Z,1509055196.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:57.038Z,1509055197.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:57.125Z,1509055197.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:57.435Z,1509055197.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:57.467Z,1509055197.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:57.836Z,1509055197.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:57.870Z,1509055197.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:58.230Z,1509055198.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:58.247Z,1509055198.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:58.638Z,1509055198.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:58.670Z,1509055198.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:59.039Z,1509055199.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:59.087Z,1509055199.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:59.444Z,1509055199.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:59.478Z,1509055199.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T21:59:59.837Z,1509055199.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T21:59:59.884Z,1509055199.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:00.274Z,1509055200.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:00.308Z,1509055200.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:00.638Z,1509055200.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:00.674Z,1509055200.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:01.041Z,1509055201.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:01.079Z,1509055201.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:01.433Z,1509055201.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:01.462Z,1509055201.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:01.838Z,1509055201.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:01.854Z,1509055201.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:02.245Z,1509055202.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:02.261Z,1509055202.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:02.536Z,1509055202.536 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:02.641Z,1509055202.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:02.657Z,1509055202.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:03.054Z,1509055203.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:03.075Z,1509055203.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:03.333Z,1509055203.333 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:03.445Z,1509055203.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:03.469Z,1509055203.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:03.738Z,1509055203.738 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:03.843Z,1509055203.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:03.859Z,1509055203.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:04.270Z,1509055204.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:04.305Z,1509055204.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:04.531Z,1509055204.531 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:04.636Z,1509055204.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:04.653Z,1509055204.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:05.047Z,1509055205.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:05.063Z,1509055205.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:05.328Z,1509055205.328 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:05.442Z,1509055205.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:05.475Z,1509055205.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:05.733Z,1509055205.733 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:05.851Z,1509055205.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:05.888Z,1509055205.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:06.260Z,1509055206.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:06.312Z,1509055206.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:06.527Z,1509055206.527 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:06.624Z,1509055206.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:06.664Z,1509055206.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:07.044Z,1509055207.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:07.062Z,1509055207.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:07.323Z,1509055207.323 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:07.445Z,1509055207.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:07.466Z,1509055207.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:07.728Z,1509055207.728 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:07.830Z,1509055207.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:07.863Z,1509055207.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:08.238Z,1509055208.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:08.311Z,1509055208.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:08.521Z,1509055208.521 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:08.633Z,1509055208.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:08.667Z,1509055208.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:09.023Z,1509055209.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:09.080Z,1509055209.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:09.319Z,1509055209.319 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:09.435Z,1509055209.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:09.460Z,1509055209.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:09.723Z,1509055209.723 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:09.836Z,1509055209.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:09.894Z,1509055209.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:10.245Z,1509055210.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:10.302Z,1509055210.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:10.520Z,1509055210.520 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:10.634Z,1509055210.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:10.665Z,1509055210.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:11.037Z,1509055211.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:11.053Z,1509055211.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:11.317Z,1509055211.317 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:11.438Z,1509055211.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:11.462Z,1509055211.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:11.722Z,1509055211.722 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:11.828Z,1509055211.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:11.872Z,1509055211.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:12.229Z,1509055212.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:12.279Z,1509055212.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:12.629Z,1509055212.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:12.646Z,1509055212.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:13.031Z,1509055213.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:13.048Z,1509055213.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:13.441Z,1509055213.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:13.457Z,1509055213.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:13.837Z,1509055213.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:13.854Z,1509055213.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:14.238Z,1509055214.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:14.260Z,1509055214.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:14.640Z,1509055214.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:14.657Z,1509055214.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:15.024Z,1509055215.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:15.055Z,1509055215.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:15.429Z,1509055215.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:15.462Z,1509055215.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:15.828Z,1509055215.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:15.865Z,1509055215.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:16.238Z,1509055216.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:16.266Z,1509055216.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:16.637Z,1509055216.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:16.670Z,1509055216.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:17.063Z,1509055217.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:17.091Z,1509055217.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:17.439Z,1509055217.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:17.472Z,1509055217.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:17.827Z,1509055217.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:17.864Z,1509055217.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:18.243Z,1509055218.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:18.263Z,1509055218.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:18.652Z,1509055218.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:18.681Z,1509055218.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:19.010Z,1509055219.010 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:00:19.032Z,1509055219.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:19.066Z,1509055219.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:19.450Z,1509055219.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:19.489Z,1509055219.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:19.844Z,1509055219.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:19.881Z,1509055219.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:20.245Z,1509055220.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:20.282Z,1509055220.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:20.661Z,1509055220.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:20.710Z,1509055220.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:21.022Z,1509055221.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:21.059Z,1509055221.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:21.451Z,1509055221.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:21.484Z,1509055221.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:21.842Z,1509055221.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:21.871Z,1509055221.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:22.258Z,1509055222.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:22.337Z,1509055222.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:22.641Z,1509055222.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:22.657Z,1509055222.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:23.041Z,1509055223.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:23.057Z,1509055223.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:23.433Z,1509055223.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:23.506Z,1509055223.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:23.829Z,1509055223.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:23.873Z,1509055223.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:24.231Z,1509055224.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:24.276Z,1509055224.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:24.637Z,1509055224.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:24.692Z,1509055224.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:25.023Z,1509055225.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:25.065Z,1509055225.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:25.432Z,1509055225.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:25.460Z,1509055225.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:25.822Z,1509055225.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:25.865Z,1509055225.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:26.234Z,1509055226.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:26.263Z,1509055226.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:26.640Z,1509055226.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:26.665Z,1509055226.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:27.023Z,1509055227.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:27.042Z,1509055227.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:27.434Z,1509055227.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:27.467Z,1509055227.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:27.835Z,1509055227.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:27.878Z,1509055227.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:28.236Z,1509055228.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:28.252Z,1509055228.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:28.644Z,1509055228.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:28.660Z,1509055228.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:29.034Z,1509055229.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:29.050Z,1509055229.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:29.442Z,1509055229.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:29.458Z,1509055229.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:29.830Z,1509055229.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:29.859Z,1509055229.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:30.222Z,1509055230.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:30.257Z,1509055230.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:30.630Z,1509055230.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:30.668Z,1509055230.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:31.043Z,1509055231.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:31.075Z,1509055231.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:31.426Z,1509055231.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:31.447Z,1509055231.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:31.831Z,1509055231.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:31.860Z,1509055231.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:32.239Z,1509055232.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:32.260Z,1509055232.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:32.641Z,1509055232.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:32.675Z,1509055232.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:33.043Z,1509055233.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:33.064Z,1509055233.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:33.460Z,1509055233.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:33.481Z,1509055233.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:33.846Z,1509055233.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:33.883Z,1509055233.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:34.239Z,1509055234.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:34.255Z,1509055234.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:34.638Z,1509055234.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:34.655Z,1509055234.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:35.035Z,1509055235.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:35.059Z,1509055235.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:35.426Z,1509055235.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:35.485Z,1509055235.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:35.838Z,1509055235.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:35.880Z,1509055235.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:36.237Z,1509055236.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:36.284Z,1509055236.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:36.638Z,1509055236.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:36.678Z,1509055236.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:37.048Z,1509055237.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:37.065Z,1509055237.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:37.446Z,1509055237.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:37.502Z,1509055237.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:37.838Z,1509055237.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:37.871Z,1509055237.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:38.257Z,1509055238.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:38.317Z,1509055238.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:38.638Z,1509055238.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:38.705Z,1509055238.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:39.046Z,1509055239.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:39.095Z,1509055239.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:39.443Z,1509055239.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:39.463Z,1509055239.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:39.835Z,1509055239.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:39.866Z,1509055239.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:40.244Z,1509055240.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:40.269Z,1509055240.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:40.635Z,1509055240.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:40.659Z,1509055240.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:41.022Z,1509055241.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:41.063Z,1509055241.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:41.428Z,1509055241.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:41.457Z,1509055241.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:41.835Z,1509055241.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:41.875Z,1509055241.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:42.338Z,1509055242.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:42.384Z,1509055242.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:42.758Z,1509055242.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:42.774Z,1509055242.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:43.166Z,1509055243.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:43.182Z,1509055243.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:43.545Z,1509055243.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:43.569Z,1509055243.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:43.950Z,1509055243.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:43.973Z,1509055243.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:44.340Z,1509055244.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:44.371Z,1509055244.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:44.760Z,1509055244.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:44.776Z,1509055244.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:45.173Z,1509055245.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:45.200Z,1509055245.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:45.544Z,1509055245.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:45.577Z,1509055245.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:45.948Z,1509055245.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:45.977Z,1509055245.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:46.349Z,1509055246.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:46.365Z,1509055246.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:46.747Z,1509055246.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:46.763Z,1509055246.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:47.167Z,1509055247.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:47.201Z,1509055247.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:47.549Z,1509055247.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:47.566Z,1509055247.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:47.965Z,1509055247.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:48.007Z,1509055248.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:48.355Z,1509055248.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:48.372Z,1509055248.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:48.758Z,1509055248.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:48.774Z,1509055248.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:49.168Z,1509055249.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:49.185Z,1509055249.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:49.542Z,1509055249.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:49.607Z,1509055249.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:49.941Z,1509055249.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:49.974Z,1509055249.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:50.340Z,1509055250.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:50.392Z,1509055250.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:50.747Z,1509055250.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:50.797Z,1509055250.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:51.173Z,1509055251.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:51.197Z,1509055251.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:51.542Z,1509055251.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:51.598Z,1509055251.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:51.952Z,1509055251.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:51.977Z,1509055251.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:52.334Z,1509055252.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:52.399Z,1509055252.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:52.743Z,1509055252.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:52.811Z,1509055252.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:53.174Z,1509055253.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:53.190Z,1509055253.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:53.549Z,1509055253.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:53.593Z,1509055253.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:53.947Z,1509055253.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:53.983Z,1509055253.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:54.350Z,1509055254.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:54.367Z,1509055254.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:54.752Z,1509055254.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:54.773Z,1509055254.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:55.180Z,1509055255.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:55.206Z,1509055255.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:55.554Z,1509055255.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:55.571Z,1509055255.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:55.958Z,1509055255.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:55.975Z,1509055255.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:56.356Z,1509055256.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:56.372Z,1509055256.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:56.755Z,1509055256.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:56.772Z,1509055256.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:57.174Z,1509055257.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:57.195Z,1509055257.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:57.547Z,1509055257.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:57.577Z,1509055257.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:57.943Z,1509055257.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:57.989Z,1509055257.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:58.349Z,1509055258.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:58.382Z,1509055258.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:58.754Z,1509055258.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:58.769Z,1509055258.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:59.171Z,1509055259.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:59.218Z,1509055259.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:59.542Z,1509055259.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:59.572Z,1509055259.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:00:59.943Z,1509055259.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:00:59.980Z,1509055259.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:00.347Z,1509055260.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:00.379Z,1509055260.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:00.740Z,1509055260.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:00.779Z,1509055260.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:01.182Z,1509055261.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:01.213Z,1509055261.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:01.550Z,1509055261.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:01.579Z,1509055261.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:01.949Z,1509055261.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:01.971Z,1509055261.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:02.352Z,1509055262.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:02.368Z,1509055262.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:02.756Z,1509055262.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:02.772Z,1509055262.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:03.244Z,1509055263.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:03.278Z,1509055263.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:03.649Z,1509055263.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:03.678Z,1509055263.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:04.043Z,1509055264.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:04.080Z,1509055264.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:04.446Z,1509055264.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:04.462Z,1509055264.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:04.853Z,1509055264.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:05.002Z,1509055265.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:05.261Z,1509055265.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:05.294Z,1509055265.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:05.653Z,1509055265.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:05.707Z,1509055265.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:06.060Z,1509055266.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:06.081Z,1509055266.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:06.440Z,1509055266.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:06.504Z,1509055266.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:06.842Z,1509055266.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:06.871Z,1509055266.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:07.246Z,1509055267.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:07.303Z,1509055267.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:07.648Z,1509055267.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:07.664Z,1509055267.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:08.049Z,1509055268.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:08.065Z,1509055268.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:08.450Z,1509055268.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:08.475Z,1509055268.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:08.852Z,1509055268.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:08.868Z,1509055268.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:09.253Z,1509055269.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:09.287Z,1509055269.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:09.652Z,1509055269.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:09.685Z,1509055269.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:10.054Z,1509055270.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:10.070Z,1509055270.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:10.453Z,1509055270.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:10.475Z,1509055270.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:10.855Z,1509055270.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:10.872Z,1509055270.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:11.252Z,1509055271.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:11.292Z,1509055271.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:11.665Z,1509055271.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:11.690Z,1509055271.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:12.051Z,1509055272.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:12.083Z,1509055272.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:12.454Z,1509055272.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:12.469Z,1509055272.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:12.856Z,1509055272.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:12.873Z,1509055272.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:13.243Z,1509055273.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:13.259Z,1509055273.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:13.645Z,1509055273.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:13.662Z,1509055273.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:14.045Z,1509055274.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:14.061Z,1509055274.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:14.457Z,1509055274.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:14.478Z,1509055274.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:14.855Z,1509055274.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:14.872Z,1509055274.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:15.257Z,1509055275.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:15.273Z,1509055275.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:15.643Z,1509055275.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:15.678Z,1509055275.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:16.044Z,1509055276.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:16.072Z,1509055276.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:16.452Z,1509055276.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:16.484Z,1509055276.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:16.851Z,1509055276.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:16.867Z,1509055276.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:17.261Z,1509055277.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:17.291Z,1509055277.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:17.646Z,1509055277.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:17.682Z,1509055277.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:18.046Z,1509055278.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:18.079Z,1509055278.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:18.450Z,1509055278.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:18.495Z,1509055278.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:18.848Z,1509055278.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:18.864Z,1509055278.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:19.227Z,1509055279.227 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:01:19.261Z,1509055279.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:19.337Z,1509055279.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:19.649Z,1509055279.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:19.678Z,1509055279.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:20.042Z,1509055280.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:20.094Z,1509055280.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:20.444Z,1509055280.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:20.460Z,1509055280.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:20.845Z,1509055280.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:20.957Z,1509055280.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:21.248Z,1509055281.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:21.304Z,1509055281.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:21.654Z,1509055281.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:21.671Z,1509055281.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:22.041Z,1509055282.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:22.073Z,1509055282.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:22.446Z,1509055282.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:22.482Z,1509055282.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:22.842Z,1509055282.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:22.947Z,1509055282.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:23.255Z,1509055283.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:23.297Z,1509055283.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:23.656Z,1509055283.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:23.684Z,1509055283.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:24.058Z,1509055284.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:24.074Z,1509055284.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:24.441Z,1509055284.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:24.469Z,1509055284.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:24.841Z,1509055284.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:24.890Z,1509055284.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:25.251Z,1509055285.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:25.267Z,1509055285.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:25.659Z,1509055285.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:25.675Z,1509055285.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:26.052Z,1509055286.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:26.068Z,1509055286.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:26.439Z,1509055286.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:26.467Z,1509055286.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:26.844Z,1509055286.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:26.877Z,1509055286.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:27.247Z,1509055287.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:27.271Z,1509055287.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:27.658Z,1509055287.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:27.700Z,1509055287.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:28.057Z,1509055288.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:28.074Z,1509055288.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:28.456Z,1509055288.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:28.473Z,1509055288.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:28.839Z,1509055288.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:28.872Z,1509055288.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:29.252Z,1509055289.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:29.267Z,1509055289.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:29.654Z,1509055289.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:29.697Z,1509055289.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:30.059Z,1509055290.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:30.076Z,1509055290.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:30.457Z,1509055290.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:30.473Z,1509055290.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:30.863Z,1509055290.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:30.891Z,1509055290.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:31.251Z,1509055291.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:31.283Z,1509055291.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:31.654Z,1509055291.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:31.671Z,1509055291.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:32.048Z,1509055292.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:32.068Z,1509055292.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:32.455Z,1509055292.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:32.471Z,1509055292.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:32.859Z,1509055292.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:32.956Z,1509055292.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:33.248Z,1509055293.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:33.323Z,1509055293.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:33.647Z,1509055293.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:33.663Z,1509055293.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:34.046Z,1509055294.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:34.088Z,1509055294.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:34.452Z,1509055294.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:34.468Z,1509055294.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:34.853Z,1509055294.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:34.949Z,1509055294.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:35.249Z,1509055295.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:35.284Z,1509055295.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:35.642Z,1509055295.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:35.694Z,1509055295.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:36.044Z,1509055296.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:36.077Z,1509055296.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:36.453Z,1509055296.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:36.492Z,1509055296.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:36.852Z,1509055296.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:36.955Z,1509055296.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:37.259Z,1509055297.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:37.276Z,1509055297.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:37.648Z,1509055297.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:37.681Z,1509055297.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:38.061Z,1509055298.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:38.077Z,1509055298.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:38.448Z,1509055298.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:38.480Z,1509055298.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:38.855Z,1509055298.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:38.953Z,1509055298.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:39.247Z,1509055299.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:39.296Z,1509055299.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:39.652Z,1509055299.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:39.694Z,1509055299.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:40.048Z,1509055300.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:40.064Z,1509055300.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:40.451Z,1509055300.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:40.467Z,1509055300.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:40.852Z,1509055300.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:40.871Z,1509055300.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:41.248Z,1509055301.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:41.289Z,1509055301.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:41.644Z,1509055301.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:41.672Z,1509055301.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:42.049Z,1509055302.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:42.097Z,1509055302.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:42.452Z,1509055302.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:42.489Z,1509055302.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:42.848Z,1509055302.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:42.864Z,1509055302.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:43.242Z,1509055303.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:43.271Z,1509055303.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:43.643Z,1509055303.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:43.683Z,1509055303.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:44.052Z,1509055304.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:44.068Z,1509055304.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:44.450Z,1509055304.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:44.475Z,1509055304.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:44.850Z,1509055304.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:44.867Z,1509055304.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:45.241Z,1509055305.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:45.279Z,1509055305.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:45.646Z,1509055305.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:45.662Z,1509055305.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:46.053Z,1509055306.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:46.081Z,1509055306.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:46.453Z,1509055306.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:46.469Z,1509055306.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:46.985Z,1509055306.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:47.063Z,1509055307.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:47.389Z,1509055307.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:47.444Z,1509055307.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:47.782Z,1509055307.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:47.850Z,1509055307.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:48.195Z,1509055308.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:48.201Z,1509055308.201 [PNI_TCM](ERROR): CRC does not match. Expected:0x21463 got:0x49538
2017-10-26T22:01:48.238Z,1509055308.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:48.604Z,1509055308.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:48.637Z,1509055308.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:49.016Z,1509055309.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:49.072Z,1509055309.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:49.398Z,1509055309.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:49.452Z,1509055309.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:49.770Z,1509055309.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:49.814Z,1509055309.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:50.177Z,1509055310.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:50.239Z,1509055310.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:50.573Z,1509055310.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:50.622Z,1509055310.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:50.972Z,1509055310.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:51.031Z,1509055311.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:51.393Z,1509055311.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:51.417Z,1509055311.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:51.793Z,1509055311.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:51.829Z,1509055311.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:52.194Z,1509055312.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:52.234Z,1509055312.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:52.568Z,1509055312.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:52.605Z,1509055312.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:52.988Z,1509055312.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:53.022Z,1509055313.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:53.383Z,1509055313.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:53.411Z,1509055313.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:53.787Z,1509055313.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:53.819Z,1509055313.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:54.195Z,1509055314.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:54.257Z,1509055314.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:54.582Z,1509055314.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:54.619Z,1509055314.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:55.023Z,1509055315.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:55.087Z,1509055315.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:55.374Z,1509055315.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:55.416Z,1509055315.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:55.773Z,1509055315.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:55.821Z,1509055315.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:56.203Z,1509055316.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:56.236Z,1509055316.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:56.579Z,1509055316.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:56.599Z,1509055316.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:57.013Z,1509055317.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:57.061Z,1509055317.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:57.380Z,1509055317.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:57.421Z,1509055317.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:57.796Z,1509055317.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:57.812Z,1509055317.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:58.185Z,1509055318.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:58.234Z,1509055318.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:58.582Z,1509055318.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:58.611Z,1509055318.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:58.998Z,1509055318.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:59.039Z,1509055319.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:59.375Z,1509055319.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:59.437Z,1509055319.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:01:59.783Z,1509055319.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:01:59.820Z,1509055319.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:00.301Z,1509055320.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:00.338Z,1509055320.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:00.685Z,1509055320.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:00.702Z,1509055320.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:01.088Z,1509055321.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:01.104Z,1509055321.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:01.493Z,1509055321.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:01.515Z,1509055321.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:01.893Z,1509055321.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:01.910Z,1509055321.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:02.299Z,1509055322.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:02.315Z,1509055322.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:02.694Z,1509055322.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:02.765Z,1509055322.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:03.097Z,1509055323.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:03.113Z,1509055323.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:03.500Z,1509055323.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:03.554Z,1509055323.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:03.886Z,1509055323.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:03.916Z,1509055323.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:04.291Z,1509055324.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:04.363Z,1509055324.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:04.693Z,1509055324.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:04.754Z,1509055324.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:05.123Z,1509055325.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:05.167Z,1509055325.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:05.486Z,1509055325.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:05.515Z,1509055325.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:05.893Z,1509055325.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:05.914Z,1509055325.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:06.298Z,1509055326.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:06.349Z,1509055326.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:06.694Z,1509055326.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:06.710Z,1509055326.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:07.098Z,1509055327.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:07.114Z,1509055327.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:07.494Z,1509055327.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:07.511Z,1509055327.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:07.882Z,1509055327.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:07.910Z,1509055327.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:08.288Z,1509055328.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:08.323Z,1509055328.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:08.681Z,1509055328.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:08.721Z,1509055328.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:09.087Z,1509055329.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:09.160Z,1509055329.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:09.484Z,1509055329.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:09.501Z,1509055329.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:09.891Z,1509055329.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:09.907Z,1509055329.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:10.289Z,1509055330.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:10.306Z,1509055330.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:10.692Z,1509055330.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:10.708Z,1509055330.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:11.085Z,1509055331.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:11.114Z,1509055331.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:11.495Z,1509055331.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:11.535Z,1509055331.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:11.890Z,1509055331.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:11.911Z,1509055331.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:12.292Z,1509055332.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:12.325Z,1509055332.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:12.692Z,1509055332.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:12.708Z,1509055332.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:13.095Z,1509055333.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:13.117Z,1509055333.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:13.504Z,1509055333.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:13.520Z,1509055333.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:13.881Z,1509055333.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:13.909Z,1509055333.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:14.290Z,1509055334.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:14.319Z,1509055334.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:14.682Z,1509055334.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:14.707Z,1509055334.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:15.111Z,1509055335.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:15.178Z,1509055335.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:15.490Z,1509055335.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:15.535Z,1509055335.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:15.905Z,1509055335.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:15.947Z,1509055335.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:16.291Z,1509055336.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:16.315Z,1509055336.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:16.694Z,1509055336.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:16.783Z,1509055336.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:17.099Z,1509055337.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:17.115Z,1509055337.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:17.498Z,1509055337.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:17.527Z,1509055337.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:17.888Z,1509055337.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:17.952Z,1509055337.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:18.309Z,1509055338.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:18.325Z,1509055338.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:18.693Z,1509055338.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:18.760Z,1509055338.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:19.093Z,1509055339.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:19.161Z,1509055339.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:19.469Z,1509055339.469 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:02:19.489Z,1509055339.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:19.522Z,1509055339.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:19.891Z,1509055339.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:19.931Z,1509055339.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:20.291Z,1509055340.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:20.324Z,1509055340.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:20.692Z,1509055340.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:20.709Z,1509055340.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:21.091Z,1509055341.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:21.107Z,1509055341.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:21.491Z,1509055341.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:21.534Z,1509055341.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:21.885Z,1509055341.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:21.913Z,1509055341.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:22.286Z,1509055342.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:22.319Z,1509055342.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:22.691Z,1509055342.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:22.723Z,1509055342.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:23.092Z,1509055343.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:23.149Z,1509055343.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:23.485Z,1509055343.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:23.501Z,1509055343.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:23.892Z,1509055343.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:23.921Z,1509055343.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:24.290Z,1509055344.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:24.306Z,1509055344.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:24.692Z,1509055344.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:24.723Z,1509055344.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:25.089Z,1509055345.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:25.118Z,1509055345.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:25.496Z,1509055345.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:25.512Z,1509055345.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:25.891Z,1509055345.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:25.914Z,1509055345.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:26.298Z,1509055346.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:26.314Z,1509055346.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:26.700Z,1509055346.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:26.730Z,1509055346.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:27.087Z,1509055347.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:27.130Z,1509055347.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:27.486Z,1509055347.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:27.524Z,1509055347.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:27.892Z,1509055347.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:27.933Z,1509055347.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:28.311Z,1509055348.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:28.341Z,1509055348.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:28.697Z,1509055348.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:28.719Z,1509055348.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:29.091Z,1509055349.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:29.114Z,1509055349.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:29.499Z,1509055349.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:29.515Z,1509055349.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:29.889Z,1509055349.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:29.917Z,1509055349.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:30.301Z,1509055350.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:30.317Z,1509055350.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:30.681Z,1509055350.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:30.745Z,1509055350.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:31.096Z,1509055351.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:31.185Z,1509055351.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:31.492Z,1509055351.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:31.521Z,1509055351.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:31.890Z,1509055351.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:31.919Z,1509055351.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:32.286Z,1509055352.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:32.327Z,1509055352.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:32.688Z,1509055352.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:32.704Z,1509055352.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:33.100Z,1509055353.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:33.176Z,1509055353.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:33.499Z,1509055353.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:33.560Z,1509055353.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:33.902Z,1509055353.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:33.941Z,1509055353.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:34.295Z,1509055354.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:34.312Z,1509055354.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:34.688Z,1509055354.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:34.718Z,1509055354.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:35.087Z,1509055355.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:35.153Z,1509055355.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:35.491Z,1509055355.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:35.529Z,1509055355.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:35.887Z,1509055355.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:35.925Z,1509055355.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:36.287Z,1509055356.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:36.304Z,1509055356.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:36.687Z,1509055356.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:36.703Z,1509055356.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:37.092Z,1509055357.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:37.109Z,1509055357.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:37.495Z,1509055357.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:37.511Z,1509055357.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:37.888Z,1509055357.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:37.921Z,1509055357.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:38.279Z,1509055358.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:38.312Z,1509055358.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:38.694Z,1509055358.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:38.717Z,1509055358.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:39.080Z,1509055359.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:39.125Z,1509055359.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:39.489Z,1509055359.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:39.521Z,1509055359.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:39.888Z,1509055359.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:39.904Z,1509055359.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:40.293Z,1509055360.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:40.309Z,1509055360.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:40.703Z,1509055360.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:40.719Z,1509055360.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:41.093Z,1509055361.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:41.115Z,1509055361.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:41.493Z,1509055361.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:41.510Z,1509055361.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:41.882Z,1509055361.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:41.914Z,1509055361.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:42.282Z,1509055362.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:42.314Z,1509055362.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:42.690Z,1509055362.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:42.718Z,1509055362.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:43.088Z,1509055363.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:43.150Z,1509055363.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:43.488Z,1509055363.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:43.521Z,1509055363.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:43.886Z,1509055363.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:43.909Z,1509055363.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:44.296Z,1509055364.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:44.343Z,1509055364.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:44.691Z,1509055364.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:44.707Z,1509055364.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:45.100Z,1509055365.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:45.202Z,1509055365.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:45.495Z,1509055365.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:45.557Z,1509055365.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:45.899Z,1509055365.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:45.916Z,1509055365.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:46.293Z,1509055366.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:46.356Z,1509055366.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:46.698Z,1509055366.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:46.715Z,1509055366.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:47.103Z,1509055367.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:47.173Z,1509055367.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:47.481Z,1509055367.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:47.550Z,1509055367.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:47.900Z,1509055367.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:47.931Z,1509055367.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:48.287Z,1509055368.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:48.327Z,1509055368.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:48.683Z,1509055368.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:48.715Z,1509055368.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:49.116Z,1509055369.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:49.139Z,1509055369.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:49.493Z,1509055369.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:49.526Z,1509055369.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:49.893Z,1509055369.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:49.925Z,1509055369.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:50.294Z,1509055370.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:50.311Z,1509055370.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:50.687Z,1509055370.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:50.703Z,1509055370.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:51.115Z,1509055371.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:51.190Z,1509055371.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:51.496Z,1509055371.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:51.513Z,1509055371.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:51.884Z,1509055371.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:51.912Z,1509055371.912 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:51.912Z,1509055371.912 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 45
2017-10-26T22:02:51.912Z,1509055371.912 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:02:51.917Z,1509055371.917 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:51.917Z,1509055371.917 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 45
2017-10-26T22:02:51.917Z,1509055371.917 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:02:52.004Z,1509055372.004 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:02:52.004Z,1509055372.004 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:02:52.286Z,1509055372.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:52.416Z,1509055372.416 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:02:52.416Z,1509055372.416 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 45
2017-10-26T22:02:52.417Z,1509055372.417 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:02:52.417Z,1509055372.417 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 45
2017-10-26T22:02:52.548Z,1509055372.548 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:52.686Z,1509055372.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:52.717Z,1509055372.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:02:52.717Z,1509055372.717 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:02:52.718Z,1509055372.718 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:02:52.720Z,1509055372.720 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:02:52.721Z,1509055372.721 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:02:52.721Z,1509055372.721 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:02:53.115Z,1509055373.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:53.169Z,1509055373.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:53.346Z,1509055373.346 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:53.487Z,1509055373.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:53.526Z,1509055373.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:53.749Z,1509055373.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:53.887Z,1509055373.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:53.924Z,1509055373.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:54.287Z,1509055374.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:54.312Z,1509055374.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:54.543Z,1509055374.543 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:54.693Z,1509055374.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:54.729Z,1509055374.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:55.092Z,1509055375.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:55.159Z,1509055375.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:55.340Z,1509055375.340 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:55.494Z,1509055375.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:55.515Z,1509055375.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:55.744Z,1509055375.744 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:55.896Z,1509055375.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:55.913Z,1509055375.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:56.290Z,1509055376.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:56.306Z,1509055376.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:56.538Z,1509055376.538 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:56.696Z,1509055376.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:56.713Z,1509055376.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:57.080Z,1509055377.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:57.108Z,1509055377.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:57.335Z,1509055377.335 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:57.485Z,1509055377.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:57.524Z,1509055377.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:57.740Z,1509055377.740 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:57.883Z,1509055377.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:57.920Z,1509055377.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:58.292Z,1509055378.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:58.324Z,1509055378.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:58.690Z,1509055378.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:58.737Z,1509055378.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:59.088Z,1509055379.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:59.105Z,1509055379.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:59.495Z,1509055379.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:59.581Z,1509055379.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:02:59.895Z,1509055379.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:02:59.915Z,1509055379.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:00.303Z,1509055380.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:00.322Z,1509055380.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:00.701Z,1509055380.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:00.770Z,1509055380.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:01.134Z,1509055381.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:01.175Z,1509055381.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:01.639Z,1509055381.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:01.681Z,1509055381.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:02.037Z,1509055382.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:02.097Z,1509055382.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:02.439Z,1509055382.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:02.463Z,1509055382.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:02.827Z,1509055382.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:02.863Z,1509055382.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:03.243Z,1509055383.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:03.276Z,1509055383.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:03.627Z,1509055383.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:03.656Z,1509055383.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:04.040Z,1509055384.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:04.056Z,1509055384.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:04.424Z,1509055384.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:04.463Z,1509055384.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:04.832Z,1509055384.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:04.860Z,1509055384.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:05.230Z,1509055385.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:05.246Z,1509055385.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:05.637Z,1509055385.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:05.653Z,1509055385.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:06.036Z,1509055386.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:06.052Z,1509055386.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:06.438Z,1509055386.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:06.454Z,1509055386.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:06.836Z,1509055386.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:06.852Z,1509055386.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:07.230Z,1509055387.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:07.246Z,1509055387.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:07.636Z,1509055387.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:07.652Z,1509055387.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:08.030Z,1509055388.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:08.046Z,1509055388.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:08.441Z,1509055388.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:08.482Z,1509055388.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:08.837Z,1509055388.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:08.857Z,1509055388.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:09.229Z,1509055389.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:09.253Z,1509055389.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:09.628Z,1509055389.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:09.644Z,1509055389.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:10.039Z,1509055390.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:10.079Z,1509055390.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:10.433Z,1509055390.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:10.459Z,1509055390.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:10.536Z,1509055390.536 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:10.830Z,1509055390.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:10.872Z,1509055390.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:11.242Z,1509055391.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:11.259Z,1509055391.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:11.333Z,1509055391.333 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:11.631Z,1509055391.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:11.660Z,1509055391.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:11.738Z,1509055391.738 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:12.031Z,1509055392.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:12.059Z,1509055392.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:12.430Z,1509055392.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:12.454Z,1509055392.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:12.535Z,1509055392.535 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:12.836Z,1509055392.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:12.864Z,1509055392.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:12.940Z,1509055392.940 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:13.230Z,1509055393.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:13.247Z,1509055393.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:13.420Z,1509055393.420 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:13.641Z,1509055393.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:13.657Z,1509055393.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:14.035Z,1509055394.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:14.157Z,1509055394.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:14.217Z,1509055394.217 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:14.428Z,1509055394.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:14.448Z,1509055394.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:14.622Z,1509055394.622 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:14.830Z,1509055394.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:14.946Z,1509055394.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:15.236Z,1509055395.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:15.252Z,1509055395.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:15.395Z,1509055395.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:15.653Z,1509055395.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:15.702Z,1509055395.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:16.035Z,1509055396.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:16.093Z,1509055396.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:16.192Z,1509055396.192 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:16.597Z,1509055396.597 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:16.627Z,1509055396.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:16.693Z,1509055396.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:17.023Z,1509055397.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:17.060Z,1509055397.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:17.392Z,1509055397.392 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:17.427Z,1509055397.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:17.451Z,1509055397.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:17.799Z,1509055397.799 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:17.817Z,1509055397.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:17.837Z,1509055397.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:18.218Z,1509055398.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:18.234Z,1509055398.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:18.552Z,1509055398.552 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:18.621Z,1509055398.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:18.643Z,1509055398.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:19.008Z,1509055399.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:19.047Z,1509055399.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:19.345Z,1509055399.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:19.408Z,1509055399.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:19.453Z,1509055399.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:19.750Z,1509055399.750 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:19.786Z,1509055399.786 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:03:19.809Z,1509055399.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:19.849Z,1509055399.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:20.217Z,1509055400.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:20.233Z,1509055400.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:20.543Z,1509055400.543 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:20.619Z,1509055400.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:20.657Z,1509055400.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:21.033Z,1509055401.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:21.049Z,1509055401.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:21.340Z,1509055401.340 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:21.411Z,1509055401.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:21.440Z,1509055401.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:21.745Z,1509055401.745 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:21.805Z,1509055401.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:21.824Z,1509055401.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:22.220Z,1509055402.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:22.252Z,1509055402.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:22.538Z,1509055402.538 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:22.620Z,1509055402.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:22.648Z,1509055402.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:23.025Z,1509055403.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:23.060Z,1509055403.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:23.335Z,1509055403.335 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:23.405Z,1509055403.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:23.441Z,1509055403.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:23.741Z,1509055403.741 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:23.825Z,1509055403.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:23.841Z,1509055403.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:24.219Z,1509055404.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:24.236Z,1509055404.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:24.537Z,1509055404.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:24.624Z,1509055404.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:24.647Z,1509055404.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:24.942Z,1509055404.942 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:25.003Z,1509055405.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:25.043Z,1509055405.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:25.359Z,1509055405.359 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:25.417Z,1509055405.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:25.450Z,1509055405.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:25.824Z,1509055405.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:25.854Z,1509055405.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:26.156Z,1509055406.156 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:26.221Z,1509055406.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:26.237Z,1509055406.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:26.562Z,1509055406.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:26.616Z,1509055406.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:26.625Z,1509055406.625 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T22:03:26.625Z,1509055406.625 [BPC1] Data Fault, FailCount= 1
2017-10-26T22:03:26.625Z,1509055406.625 [BPC1](ERROR): Data Fault
2017-10-26T22:03:26.634Z,1509055406.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:26.768Z,1509055406.768 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T22:03:27.024Z,1509055407.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:27.041Z,1509055407.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:27.354Z,1509055407.354 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:27.412Z,1509055407.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:27.444Z,1509055407.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:27.758Z,1509055407.758 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:27.832Z,1509055407.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:27.853Z,1509055407.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:27.936Z,1509055407.936 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:03:27.936Z,1509055407.936 [BPC1] No Fault, FailCount= 1
2017-10-26T22:03:28.204Z,1509055408.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:28.289Z,1509055408.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:28.551Z,1509055408.551 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:28.603Z,1509055408.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:28.636Z,1509055408.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:29.012Z,1509055409.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:29.060Z,1509055409.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:29.345Z,1509055409.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:29.420Z,1509055409.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:29.451Z,1509055409.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:29.749Z,1509055409.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:29.813Z,1509055409.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:29.843Z,1509055409.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:30.226Z,1509055410.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:30.242Z,1509055410.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:30.542Z,1509055410.542 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:30.621Z,1509055410.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:30.638Z,1509055410.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:31.025Z,1509055411.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:31.058Z,1509055411.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:31.340Z,1509055411.340 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:31.424Z,1509055411.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:31.463Z,1509055411.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:31.744Z,1509055411.744 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:31.812Z,1509055411.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:31.842Z,1509055411.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:32.231Z,1509055412.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:32.248Z,1509055412.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:32.538Z,1509055412.538 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:32.623Z,1509055412.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:32.643Z,1509055412.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:33.028Z,1509055413.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:33.061Z,1509055413.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:33.335Z,1509055413.335 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:33.422Z,1509055413.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:33.447Z,1509055413.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:33.739Z,1509055413.739 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:33.840Z,1509055413.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:33.856Z,1509055413.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:34.217Z,1509055414.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:34.233Z,1509055414.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:34.533Z,1509055414.533 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:34.612Z,1509055414.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:34.629Z,1509055414.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:35.036Z,1509055415.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:35.082Z,1509055415.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:35.334Z,1509055415.334 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:35.415Z,1509055415.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:35.435Z,1509055415.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:35.738Z,1509055415.738 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:35.804Z,1509055415.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:35.841Z,1509055415.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:36.206Z,1509055416.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:36.239Z,1509055416.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:36.536Z,1509055416.536 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:36.615Z,1509055416.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:36.651Z,1509055416.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:37.053Z,1509055417.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:37.153Z,1509055417.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:37.333Z,1509055417.333 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:37.417Z,1509055417.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:37.433Z,1509055417.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:37.738Z,1509055417.738 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:37.817Z,1509055417.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:37.834Z,1509055417.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:38.230Z,1509055418.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:38.247Z,1509055418.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:38.535Z,1509055418.535 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:38.618Z,1509055418.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:38.634Z,1509055418.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:38.942Z,1509055418.942 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:39.039Z,1509055419.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:39.166Z,1509055419.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:39.413Z,1509055419.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:39.442Z,1509055419.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:39.521Z,1509055419.521 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:39.818Z,1509055419.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:39.836Z,1509055419.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:40.218Z,1509055420.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:40.234Z,1509055420.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:40.318Z,1509055420.318 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:40.620Z,1509055420.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:40.665Z,1509055420.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:40.723Z,1509055420.723 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:41.052Z,1509055421.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:41.152Z,1509055421.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:41.420Z,1509055421.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:41.484Z,1509055421.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:41.517Z,1509055421.517 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:41.818Z,1509055421.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:41.835Z,1509055421.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:41.923Z,1509055421.923 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:42.219Z,1509055422.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:42.235Z,1509055422.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:42.549Z,1509055422.549 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:42.616Z,1509055422.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:42.671Z,1509055422.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:43.011Z,1509055423.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:43.035Z,1509055423.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:43.343Z,1509055423.343 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:43.426Z,1509055423.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:43.485Z,1509055423.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:43.747Z,1509055423.747 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:43.809Z,1509055423.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:43.867Z,1509055423.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:44.210Z,1509055424.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:44.241Z,1509055424.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:44.540Z,1509055424.540 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:44.617Z,1509055424.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:44.646Z,1509055424.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:45.025Z,1509055425.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:45.053Z,1509055425.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:45.337Z,1509055425.337 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:45.421Z,1509055425.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:45.437Z,1509055425.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:45.812Z,1509055425.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:45.828Z,1509055425.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:46.136Z,1509055426.136 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:46.202Z,1509055426.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:46.240Z,1509055426.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:46.551Z,1509055426.551 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:46.615Z,1509055426.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:46.638Z,1509055426.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:47.007Z,1509055427.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:47.036Z,1509055427.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:47.345Z,1509055427.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:47.406Z,1509055427.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:47.443Z,1509055427.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:47.825Z,1509055427.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:47.841Z,1509055427.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:48.050Z,1509055428.050 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:48.232Z,1509055428.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:48.253Z,1509055428.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:48.616Z,1509055428.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:48.653Z,1509055428.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:48.847Z,1509055428.847 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:49.009Z,1509055429.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:49.062Z,1509055429.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:49.426Z,1509055429.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:49.448Z,1509055429.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:49.453Z,1509055429.453 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:49.817Z,1509055429.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:49.839Z,1509055429.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:50.218Z,1509055430.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:50.246Z,1509055430.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:50.249Z,1509055430.249 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:50.608Z,1509055430.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:50.651Z,1509055430.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:50.654Z,1509055430.654 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:51.038Z,1509055431.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:51.069Z,1509055431.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:51.421Z,1509055431.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:51.439Z,1509055431.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:51.447Z,1509055431.447 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:51.826Z,1509055431.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:51.848Z,1509055431.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:51.852Z,1509055431.852 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:52.224Z,1509055432.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:52.245Z,1509055432.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:52.553Z,1509055432.553 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:52.616Z,1509055432.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:52.633Z,1509055432.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:53.020Z,1509055433.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:53.036Z,1509055433.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:53.346Z,1509055433.346 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:53.417Z,1509055433.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:53.450Z,1509055433.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:53.751Z,1509055433.751 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:53.812Z,1509055433.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:53.833Z,1509055433.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:54.213Z,1509055434.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:54.255Z,1509055434.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:54.544Z,1509055434.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:54.619Z,1509055434.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:54.635Z,1509055434.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:55.019Z,1509055435.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:55.028Z,1509055435.028 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T22:03:55.028Z,1509055435.028 [BPC1] Data Fault, FailCount= 1
2017-10-26T22:03:55.028Z,1509055435.028 [BPC1](ERROR): Data Fault
2017-10-26T22:03:55.045Z,1509055435.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:55.170Z,1509055435.170 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T22:03:55.345Z,1509055435.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:55.422Z,1509055435.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:55.443Z,1509055435.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:55.750Z,1509055435.750 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:55.814Z,1509055435.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:55.850Z,1509055435.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:56.213Z,1509055436.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:56.280Z,1509055436.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:56.403Z,1509055436.403 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:03:56.404Z,1509055436.404 [BPC1] No Fault, FailCount= 1
2017-10-26T22:03:56.543Z,1509055436.543 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:56.614Z,1509055436.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:56.698Z,1509055436.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:57.010Z,1509055437.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:57.062Z,1509055437.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:57.341Z,1509055437.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:57.409Z,1509055437.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:57.433Z,1509055437.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:57.745Z,1509055437.745 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:57.820Z,1509055437.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:57.836Z,1509055437.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:58.226Z,1509055438.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:58.242Z,1509055438.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:58.542Z,1509055438.542 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:58.604Z,1509055438.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:58.641Z,1509055438.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:59.039Z,1509055439.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:59.064Z,1509055439.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:59.339Z,1509055439.339 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:59.421Z,1509055439.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:59.450Z,1509055439.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:03:59.744Z,1509055439.744 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:59.813Z,1509055439.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:03:59.835Z,1509055439.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:00.216Z,1509055440.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:00.232Z,1509055440.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:00.541Z,1509055440.541 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:00.623Z,1509055440.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:00.639Z,1509055440.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:00.948Z,1509055440.948 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:01.034Z,1509055441.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:01.080Z,1509055441.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:01.416Z,1509055441.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:01.445Z,1509055441.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:01.446Z,1509055441.446 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:01.805Z,1509055441.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:01.832Z,1509055441.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:02.221Z,1509055442.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:02.237Z,1509055442.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:02.244Z,1509055442.244 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:02.619Z,1509055442.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:02.643Z,1509055442.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:02.649Z,1509055442.649 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:03.014Z,1509055443.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:03.046Z,1509055443.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:03.353Z,1509055443.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:03.435Z,1509055443.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:03.466Z,1509055443.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:03.824Z,1509055443.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:03.840Z,1509055443.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:04.151Z,1509055444.151 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:04.219Z,1509055444.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:04.240Z,1509055444.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:04.555Z,1509055444.555 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:04.610Z,1509055444.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:04.643Z,1509055444.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:05.185Z,1509055445.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:05.202Z,1509055445.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:05.349Z,1509055445.349 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:05.599Z,1509055445.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:05.615Z,1509055445.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:05.753Z,1509055445.753 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:05.982Z,1509055445.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:06.015Z,1509055446.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:06.406Z,1509055446.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:06.424Z,1509055446.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:06.547Z,1509055446.547 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:06.804Z,1509055446.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:06.826Z,1509055446.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:07.190Z,1509055447.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:07.212Z,1509055447.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:07.348Z,1509055447.348 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:07.590Z,1509055447.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:07.607Z,1509055447.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:07.752Z,1509055447.752 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:07.996Z,1509055447.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:08.013Z,1509055448.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:08.396Z,1509055448.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:08.413Z,1509055448.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:08.546Z,1509055448.546 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:08.794Z,1509055448.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:08.823Z,1509055448.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:09.178Z,1509055449.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:09.229Z,1509055449.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:09.343Z,1509055449.343 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:09.593Z,1509055449.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:09.614Z,1509055449.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:09.748Z,1509055449.748 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:09.994Z,1509055449.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:10.010Z,1509055450.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:10.391Z,1509055450.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:10.407Z,1509055450.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:10.541Z,1509055450.541 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:10.792Z,1509055450.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:10.814Z,1509055450.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:11.210Z,1509055451.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:11.228Z,1509055451.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:11.338Z,1509055451.338 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:11.584Z,1509055451.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:11.625Z,1509055451.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:11.742Z,1509055451.742 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:11.985Z,1509055451.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:12.037Z,1509055452.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:12.382Z,1509055452.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:12.391Z,1509055452.391 [BPC1](ERROR): Failed to receive battery data
2017-10-26T22:04:12.391Z,1509055452.391 [BPC1] Communications Fault, FailCount= 2
2017-10-26T22:04:12.391Z,1509055452.391 [BPC1](ERROR): Communications Fault
2017-10-26T22:04:12.428Z,1509055452.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:12.528Z,1509055452.528 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T22:04:12.540Z,1509055452.540 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:12.780Z,1509055452.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:12.796Z,1509055452.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:13.189Z,1509055453.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:13.218Z,1509055453.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:13.337Z,1509055453.337 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:13.598Z,1509055453.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:13.646Z,1509055453.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:13.742Z,1509055453.742 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:13.748Z,1509055453.748 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:04:13.748Z,1509055453.748 [BPC1] No Fault, FailCount= 2
2017-10-26T22:04:13.984Z,1509055453.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:14.069Z,1509055454.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:14.385Z,1509055454.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:14.413Z,1509055454.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:14.539Z,1509055454.539 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:14.795Z,1509055454.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:14.811Z,1509055454.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:14.944Z,1509055454.944 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:15.193Z,1509055455.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:15.244Z,1509055455.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:15.386Z,1509055455.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:15.586Z,1509055455.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:15.632Z,1509055455.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:15.990Z,1509055455.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:16.022Z,1509055456.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:16.181Z,1509055456.181 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:16.385Z,1509055456.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:16.401Z,1509055456.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:16.787Z,1509055456.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:16.817Z,1509055456.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:16.990Z,1509055456.990 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:17.197Z,1509055457.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:17.214Z,1509055457.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:17.395Z,1509055457.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:17.594Z,1509055457.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:17.610Z,1509055457.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:17.986Z,1509055457.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:18.021Z,1509055458.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:18.194Z,1509055458.194 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:18.382Z,1509055458.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:18.409Z,1509055458.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:18.601Z,1509055458.601 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:18.964Z,1509055458.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:19.019Z,1509055459.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:19.321Z,1509055459.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:19.373Z,1509055459.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:19.395Z,1509055459.395 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:19.729Z,1509055459.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:19.753Z,1509055459.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:19.799Z,1509055459.799 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:20.088Z,1509055460.088 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:04:20.130Z,1509055460.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:20.189Z,1509055460.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:20.519Z,1509055460.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:20.536Z,1509055460.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:20.552Z,1509055460.552 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:20.919Z,1509055460.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:21.030Z,1509055461.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:21.321Z,1509055461.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:21.349Z,1509055461.349 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:21.375Z,1509055461.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:21.727Z,1509055461.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:21.755Z,1509055461.755 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:21.756Z,1509055461.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:21.820Z,1509055461.820 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T22:04:22.116Z,1509055462.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:22.186Z,1509055462.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:22.509Z,1509055462.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:22.547Z,1509055462.547 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:22.555Z,1509055462.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:22.969Z,1509055462.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:23.014Z,1509055463.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:23.327Z,1509055463.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:23.344Z,1509055463.344 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:23.362Z,1509055463.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:23.715Z,1509055463.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:23.744Z,1509055463.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:23.749Z,1509055463.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:24.116Z,1509055464.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:24.188Z,1509055464.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:24.517Z,1509055464.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:24.542Z,1509055464.542 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:24.543Z,1509055464.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:24.965Z,1509055464.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:25.030Z,1509055465.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:25.317Z,1509055465.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:25.340Z,1509055465.340 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:25.354Z,1509055465.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:25.718Z,1509055465.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:25.744Z,1509055465.744 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:25.747Z,1509055465.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:26.123Z,1509055466.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:26.183Z,1509055466.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:26.523Z,1509055466.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:26.537Z,1509055466.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:26.566Z,1509055466.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:26.922Z,1509055466.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:27.053Z,1509055467.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:27.306Z,1509055467.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:27.335Z,1509055467.335 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:27.343Z,1509055467.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:27.715Z,1509055467.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:27.739Z,1509055467.739 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:27.762Z,1509055467.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:28.124Z,1509055468.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:28.172Z,1509055468.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:28.513Z,1509055468.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:28.536Z,1509055468.536 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:28.557Z,1509055468.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:28.970Z,1509055468.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:29.036Z,1509055469.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:29.314Z,1509055469.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:29.338Z,1509055469.338 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:29.375Z,1509055469.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:29.713Z,1509055469.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:29.729Z,1509055469.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:29.743Z,1509055469.743 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:30.128Z,1509055470.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:30.182Z,1509055470.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:30.518Z,1509055470.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:30.534Z,1509055470.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:30.541Z,1509055470.541 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:30.915Z,1509055470.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:31.019Z,1509055471.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:31.311Z,1509055471.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:31.337Z,1509055471.337 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:31.346Z,1509055471.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:31.716Z,1509055471.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:31.733Z,1509055471.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:31.742Z,1509055471.742 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:32.127Z,1509055472.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:32.175Z,1509055472.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:32.525Z,1509055472.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:32.535Z,1509055472.535 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:32.542Z,1509055472.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:32.919Z,1509055472.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:33.026Z,1509055473.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:33.319Z,1509055473.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:33.332Z,1509055473.332 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:33.351Z,1509055473.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:33.723Z,1509055473.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:33.737Z,1509055473.737 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:33.740Z,1509055473.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:34.123Z,1509055474.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:34.172Z,1509055474.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:34.505Z,1509055474.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:34.534Z,1509055474.534 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:34.547Z,1509055474.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:34.916Z,1509055474.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:35.009Z,1509055475.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:35.318Z,1509055475.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:35.331Z,1509055475.331 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:35.345Z,1509055475.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:35.715Z,1509055475.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:35.736Z,1509055475.736 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:35.756Z,1509055475.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:36.118Z,1509055476.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:36.190Z,1509055476.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:36.511Z,1509055476.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:36.533Z,1509055476.533 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:36.567Z,1509055476.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:36.940Z,1509055476.940 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:36.954Z,1509055476.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:37.009Z,1509055477.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:37.315Z,1509055477.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:37.364Z,1509055477.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:37.431Z,1509055477.431 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:37.720Z,1509055477.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:37.759Z,1509055477.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:38.132Z,1509055478.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:38.166Z,1509055478.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:38.228Z,1509055478.228 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:38.515Z,1509055478.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:38.568Z,1509055478.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:38.632Z,1509055478.632 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:39.029Z,1509055479.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:39.142Z,1509055479.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:39.370Z,1509055479.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:39.439Z,1509055479.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:39.476Z,1509055479.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:39.844Z,1509055479.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:39.909Z,1509055479.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:40.168Z,1509055480.168 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:40.245Z,1509055480.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:40.281Z,1509055480.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:40.583Z,1509055480.583 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:40.651Z,1509055480.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:40.667Z,1509055480.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:41.053Z,1509055481.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:41.141Z,1509055481.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:41.365Z,1509055481.365 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:41.446Z,1509055481.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:41.476Z,1509055481.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:41.843Z,1509055481.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:41.921Z,1509055481.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:42.162Z,1509055482.162 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:42.251Z,1509055482.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:42.275Z,1509055482.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:42.566Z,1509055482.566 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:42.648Z,1509055482.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:42.697Z,1509055482.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:43.042Z,1509055483.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:43.155Z,1509055483.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:43.362Z,1509055483.362 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:43.446Z,1509055483.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:43.475Z,1509055483.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:43.776Z,1509055483.776 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:43.849Z,1509055483.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:43.866Z,1509055483.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:44.254Z,1509055484.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:44.270Z,1509055484.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:44.554Z,1509055484.554 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:44.647Z,1509055484.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:44.663Z,1509055484.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:45.035Z,1509055485.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:45.077Z,1509055485.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:45.347Z,1509055485.347 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:45.446Z,1509055485.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:45.466Z,1509055485.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:45.751Z,1509055485.751 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:45.854Z,1509055485.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:45.883Z,1509055485.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:46.252Z,1509055486.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:46.268Z,1509055486.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:46.544Z,1509055486.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:46.648Z,1509055486.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:46.665Z,1509055486.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:47.062Z,1509055487.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:47.097Z,1509055487.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:47.346Z,1509055487.346 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:47.440Z,1509055487.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:47.472Z,1509055487.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:47.750Z,1509055487.750 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:47.840Z,1509055487.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:47.857Z,1509055487.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:48.249Z,1509055488.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:48.266Z,1509055488.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:48.544Z,1509055488.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:48.643Z,1509055488.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:48.660Z,1509055488.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:49.047Z,1509055489.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:49.063Z,1509055489.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:49.341Z,1509055489.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:49.451Z,1509055489.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:49.472Z,1509055489.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:49.745Z,1509055489.745 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:49.839Z,1509055489.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:49.866Z,1509055489.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:50.240Z,1509055490.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:50.280Z,1509055490.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:50.539Z,1509055490.539 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:50.640Z,1509055490.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:50.673Z,1509055490.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:51.037Z,1509055491.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:51.081Z,1509055491.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:51.340Z,1509055491.340 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:51.451Z,1509055491.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:51.489Z,1509055491.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:51.745Z,1509055491.745 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:51.850Z,1509055491.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:51.883Z,1509055491.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:52.255Z,1509055492.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:52.295Z,1509055492.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:52.542Z,1509055492.542 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:52.655Z,1509055492.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:52.680Z,1509055492.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:53.046Z,1509055493.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:53.062Z,1509055493.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:53.339Z,1509055493.339 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:53.452Z,1509055493.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:53.468Z,1509055493.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:53.744Z,1509055493.744 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:53.855Z,1509055493.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:53.914Z,1509055493.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:54.246Z,1509055494.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:54.310Z,1509055494.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:54.541Z,1509055494.541 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:54.638Z,1509055494.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:54.662Z,1509055494.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:54.947Z,1509055494.947 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:55.046Z,1509055495.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:55.178Z,1509055495.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:55.453Z,1509055495.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:55.500Z,1509055495.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:55.551Z,1509055495.551 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:55.853Z,1509055495.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:55.870Z,1509055495.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:56.252Z,1509055496.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:56.316Z,1509055496.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:56.348Z,1509055496.348 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:56.638Z,1509055496.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:56.677Z,1509055496.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:56.752Z,1509055496.752 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:57.038Z,1509055497.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:57.114Z,1509055497.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:57.350Z,1509055497.350 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:57.443Z,1509055497.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:57.506Z,1509055497.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:57.852Z,1509055497.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:57.880Z,1509055497.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:58.147Z,1509055498.147 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:58.259Z,1509055498.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:58.284Z,1509055498.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:58.551Z,1509055498.551 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:58.644Z,1509055498.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:58.678Z,1509055498.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:59.046Z,1509055499.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:59.067Z,1509055499.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:59.349Z,1509055499.349 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:59.442Z,1509055499.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:59.475Z,1509055499.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:04:59.753Z,1509055499.753 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:59.847Z,1509055499.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:04:59.875Z,1509055499.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:00.260Z,1509055500.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:00.276Z,1509055500.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:00.546Z,1509055500.546 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:00.660Z,1509055500.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:00.677Z,1509055500.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:01.051Z,1509055501.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:01.177Z,1509055501.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:01.344Z,1509055501.344 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:01.449Z,1509055501.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:01.488Z,1509055501.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:01.748Z,1509055501.748 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:01.850Z,1509055501.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:01.874Z,1509055501.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:02.246Z,1509055502.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:02.263Z,1509055502.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:02.541Z,1509055502.541 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:02.646Z,1509055502.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:02.663Z,1509055502.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:03.056Z,1509055503.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:03.073Z,1509055503.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:03.339Z,1509055503.339 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:03.448Z,1509055503.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:03.490Z,1509055503.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:03.743Z,1509055503.743 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:03.852Z,1509055503.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:03.886Z,1509055503.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:04.254Z,1509055504.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:04.270Z,1509055504.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:04.537Z,1509055504.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:04.638Z,1509055504.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:04.675Z,1509055504.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:05.047Z,1509055505.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:05.079Z,1509055505.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:05.334Z,1509055505.334 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:05.463Z,1509055505.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:05.480Z,1509055505.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:05.738Z,1509055505.738 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:05.846Z,1509055505.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:05.875Z,1509055505.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:06.241Z,1509055506.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:06.274Z,1509055506.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:06.536Z,1509055506.536 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:06.652Z,1509055506.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:06.669Z,1509055506.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:06.940Z,1509055506.940 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:07.047Z,1509055507.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:07.071Z,1509055507.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:07.353Z,1509055507.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:07.452Z,1509055507.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:07.469Z,1509055507.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:07.837Z,1509055507.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:07.874Z,1509055507.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:08.151Z,1509055508.151 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:08.248Z,1509055508.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:08.301Z,1509055508.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:08.555Z,1509055508.555 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:08.646Z,1509055508.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:08.673Z,1509055508.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:09.047Z,1509055509.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:09.063Z,1509055509.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:09.348Z,1509055509.348 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:09.448Z,1509055509.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:09.518Z,1509055509.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:09.848Z,1509055509.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:09.881Z,1509055509.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:10.149Z,1509055510.149 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:10.252Z,1509055510.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:10.269Z,1509055510.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:10.554Z,1509055510.554 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:10.649Z,1509055510.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:10.713Z,1509055510.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:11.042Z,1509055511.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:11.072Z,1509055511.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:11.347Z,1509055511.347 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:11.449Z,1509055511.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:11.518Z,1509055511.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:11.845Z,1509055511.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:11.898Z,1509055511.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:12.145Z,1509055512.145 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:12.275Z,1509055512.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:12.300Z,1509055512.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:12.553Z,1509055512.553 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:12.654Z,1509055512.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:12.690Z,1509055512.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:13.059Z,1509055513.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:13.102Z,1509055513.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:13.346Z,1509055513.346 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:13.448Z,1509055513.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:13.465Z,1509055513.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:13.751Z,1509055513.751 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:13.855Z,1509055513.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:13.872Z,1509055513.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:14.241Z,1509055514.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:14.270Z,1509055514.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:14.544Z,1509055514.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:14.791Z,1509055514.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:14.833Z,1509055514.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:15.209Z,1509055515.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:15.234Z,1509055515.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:15.341Z,1509055515.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:15.609Z,1509055515.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:15.628Z,1509055515.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:15.747Z,1509055515.747 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:16.012Z,1509055516.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:16.028Z,1509055516.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:16.405Z,1509055516.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:16.422Z,1509055516.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:16.539Z,1509055516.539 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:16.809Z,1509055516.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:16.827Z,1509055516.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:17.210Z,1509055517.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:17.239Z,1509055517.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:17.336Z,1509055517.336 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:17.602Z,1509055517.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:17.631Z,1509055517.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:17.741Z,1509055517.741 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:18.021Z,1509055518.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:18.038Z,1509055518.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:18.393Z,1509055518.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:18.421Z,1509055518.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:18.534Z,1509055518.534 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:18.816Z,1509055518.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:18.835Z,1509055518.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:19.204Z,1509055519.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:19.226Z,1509055519.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:19.331Z,1509055519.331 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:19.598Z,1509055519.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:19.630Z,1509055519.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:19.736Z,1509055519.736 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:19.981Z,1509055519.981 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:05:20.014Z,1509055520.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:20.035Z,1509055520.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:20.405Z,1509055520.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:20.421Z,1509055520.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:20.533Z,1509055520.533 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:20.807Z,1509055520.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:20.845Z,1509055520.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:21.198Z,1509055521.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:21.234Z,1509055521.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:21.331Z,1509055521.331 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:21.598Z,1509055521.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:21.616Z,1509055521.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:21.735Z,1509055521.735 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:22.006Z,1509055522.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:22.022Z,1509055522.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:22.400Z,1509055522.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:22.466Z,1509055522.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:22.532Z,1509055522.532 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:22.804Z,1509055522.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:22.821Z,1509055522.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:23.218Z,1509055523.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:23.240Z,1509055523.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:23.330Z,1509055523.330 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:23.600Z,1509055523.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:23.627Z,1509055523.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:23.734Z,1509055523.734 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:23.999Z,1509055523.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:24.061Z,1509055524.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:24.405Z,1509055524.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:24.421Z,1509055524.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:24.532Z,1509055524.532 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:24.805Z,1509055524.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:24.868Z,1509055524.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:24.937Z,1509055524.937 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:25.198Z,1509055525.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:25.227Z,1509055525.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:25.409Z,1509055525.409 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:25.600Z,1509055525.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:25.659Z,1509055525.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:25.999Z,1509055525.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:26.056Z,1509055526.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:26.206Z,1509055526.206 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:26.404Z,1509055526.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:26.429Z,1509055526.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:26.611Z,1509055526.611 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:26.809Z,1509055526.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:26.826Z,1509055526.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:27.193Z,1509055527.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:27.209Z,1509055527.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:27.396Z,1509055527.396 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:27.597Z,1509055527.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:27.613Z,1509055527.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:28.010Z,1509055528.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:28.034Z,1509055528.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:28.193Z,1509055528.193 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:28.405Z,1509055528.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:28.455Z,1509055528.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:28.599Z,1509055528.599 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:28.816Z,1509055528.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:28.832Z,1509055528.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:29.391Z,1509055529.391 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:29.419Z,1509055529.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:29.445Z,1509055529.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:29.798Z,1509055529.798 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:29.833Z,1509055529.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:29.852Z,1509055529.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:30.211Z,1509055530.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:30.255Z,1509055530.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:30.549Z,1509055530.549 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:30.607Z,1509055530.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:30.647Z,1509055530.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:31.030Z,1509055531.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:31.072Z,1509055531.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:31.342Z,1509055531.342 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:31.405Z,1509055531.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:31.441Z,1509055531.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:31.747Z,1509055531.747 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:31.817Z,1509055531.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:31.850Z,1509055531.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:32.227Z,1509055532.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:32.263Z,1509055532.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:32.540Z,1509055532.540 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:32.613Z,1509055532.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:32.637Z,1509055532.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:33.020Z,1509055533.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:33.050Z,1509055533.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:33.337Z,1509055533.337 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:33.426Z,1509055533.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:33.448Z,1509055533.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:33.742Z,1509055533.742 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:33.808Z,1509055533.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:33.844Z,1509055533.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:34.209Z,1509055534.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:34.292Z,1509055534.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:34.535Z,1509055534.535 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:34.605Z,1509055534.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:34.645Z,1509055534.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:35.033Z,1509055535.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:35.057Z,1509055535.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:35.332Z,1509055535.332 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:35.426Z,1509055535.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:35.476Z,1509055535.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:35.738Z,1509055535.738 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:35.808Z,1509055535.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:35.842Z,1509055535.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:36.216Z,1509055536.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:36.233Z,1509055536.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:36.530Z,1509055536.530 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:36.618Z,1509055536.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:36.669Z,1509055536.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:37.028Z,1509055537.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:37.060Z,1509055537.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:37.327Z,1509055537.327 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:37.422Z,1509055537.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:37.452Z,1509055537.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:37.732Z,1509055537.732 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:37.814Z,1509055537.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:37.831Z,1509055537.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:38.219Z,1509055538.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:38.267Z,1509055538.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:38.529Z,1509055538.529 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:38.621Z,1509055538.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:38.637Z,1509055538.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:38.936Z,1509055538.936 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:39.028Z,1509055539.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:39.082Z,1509055539.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:39.423Z,1509055539.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:39.447Z,1509055539.447 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:39.481Z,1509055539.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:39.825Z,1509055539.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:39.842Z,1509055539.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:40.228Z,1509055540.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:40.244Z,1509055540.244 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:40.290Z,1509055540.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:40.608Z,1509055540.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:40.649Z,1509055540.649 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:40.678Z,1509055540.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:41.008Z,1509055541.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:41.045Z,1509055541.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:41.350Z,1509055541.350 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:41.425Z,1509055541.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:41.454Z,1509055541.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:41.817Z,1509055541.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:41.833Z,1509055541.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:42.148Z,1509055542.148 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:42.232Z,1509055542.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:42.248Z,1509055542.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:42.559Z,1509055542.559 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:42.624Z,1509055542.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:42.641Z,1509055542.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:43.025Z,1509055543.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:43.054Z,1509055543.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:43.353Z,1509055543.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:43.416Z,1509055543.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:43.448Z,1509055543.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:43.757Z,1509055543.757 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:43.809Z,1509055543.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:43.841Z,1509055543.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:44.216Z,1509055544.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:44.255Z,1509055544.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:44.550Z,1509055544.550 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:44.621Z,1509055544.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:44.658Z,1509055544.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:45.009Z,1509055545.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:45.036Z,1509055545.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:45.344Z,1509055545.344 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:45.418Z,1509055545.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:45.447Z,1509055545.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:45.748Z,1509055545.748 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:45.810Z,1509055545.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:45.827Z,1509055545.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:46.219Z,1509055546.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:46.266Z,1509055546.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:46.542Z,1509055546.542 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:46.617Z,1509055546.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:46.659Z,1509055546.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:47.030Z,1509055547.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:47.081Z,1509055547.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:47.339Z,1509055547.339 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:47.419Z,1509055547.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:47.446Z,1509055547.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:47.743Z,1509055547.743 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:47.825Z,1509055547.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:47.854Z,1509055547.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:48.210Z,1509055548.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:48.252Z,1509055548.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:48.537Z,1509055548.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:48.607Z,1509055548.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:48.624Z,1509055548.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:49.163Z,1509055549.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:49.201Z,1509055549.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:49.334Z,1509055549.334 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:49.556Z,1509055549.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:49.577Z,1509055549.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:49.739Z,1509055549.739 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:49.974Z,1509055549.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:50.010Z,1509055550.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:50.365Z,1509055550.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:50.386Z,1509055550.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:50.532Z,1509055550.532 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:50.748Z,1509055550.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:50.769Z,1509055550.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:51.149Z,1509055551.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:51.185Z,1509055551.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:51.330Z,1509055551.330 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:51.541Z,1509055551.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:51.599Z,1509055551.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:51.734Z,1509055551.734 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:51.949Z,1509055551.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:51.966Z,1509055551.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:52.361Z,1509055552.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:52.400Z,1509055552.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:52.531Z,1509055552.531 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:52.753Z,1509055552.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:52.817Z,1509055552.817 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:52.817Z,1509055552.817 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 46
2017-10-26T22:05:52.817Z,1509055552.817 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:05:52.826Z,1509055552.826 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:52.826Z,1509055552.826 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 46
2017-10-26T22:05:52.826Z,1509055552.826 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:05:52.861Z,1509055552.861 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:05:52.861Z,1509055552.861 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:05:53.170Z,1509055553.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:53.225Z,1509055553.225 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:05:53.225Z,1509055553.225 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 46
2017-10-26T22:05:53.225Z,1509055553.225 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:05:53.225Z,1509055553.225 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 46
2017-10-26T22:05:53.329Z,1509055553.329 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:53.545Z,1509055553.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:53.570Z,1509055553.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:05:53.570Z,1509055553.570 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:05:53.571Z,1509055553.571 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:05:53.577Z,1509055553.577 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:05:53.578Z,1509055553.578 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:05:53.578Z,1509055553.578 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:05:53.733Z,1509055553.733 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:53.946Z,1509055553.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:54.003Z,1509055554.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:54.338Z,1509055554.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:54.387Z,1509055554.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:54.530Z,1509055554.530 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:54.740Z,1509055554.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:54.793Z,1509055554.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:54.936Z,1509055554.936 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:55.168Z,1509055555.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:55.222Z,1509055555.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:55.355Z,1509055555.355 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:55.544Z,1509055555.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:55.561Z,1509055555.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:55.949Z,1509055555.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:55.971Z,1509055555.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:56.153Z,1509055556.153 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:56.379Z,1509055556.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:56.409Z,1509055556.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:56.557Z,1509055556.557 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:56.753Z,1509055556.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:56.769Z,1509055556.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:57.143Z,1509055557.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:57.177Z,1509055557.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:57.350Z,1509055557.350 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:57.538Z,1509055557.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:57.570Z,1509055557.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:57.755Z,1509055557.755 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:57.957Z,1509055557.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:57.980Z,1509055557.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:58.348Z,1509055558.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:58.378Z,1509055558.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:58.552Z,1509055558.552 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:58.743Z,1509055558.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:58.772Z,1509055558.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:59.171Z,1509055559.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:59.202Z,1509055559.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:59.350Z,1509055559.350 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:59.548Z,1509055559.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:59.580Z,1509055559.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:05:59.754Z,1509055559.754 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:59.948Z,1509055559.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:05:59.965Z,1509055559.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:00.350Z,1509055560.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:00.366Z,1509055560.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:00.548Z,1509055560.548 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:00.749Z,1509055560.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:00.765Z,1509055560.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:01.211Z,1509055561.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:01.255Z,1509055561.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:01.345Z,1509055561.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:01.568Z,1509055561.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:01.607Z,1509055561.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:01.749Z,1509055561.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:01.939Z,1509055561.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:01.968Z,1509055561.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:02.346Z,1509055562.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:02.372Z,1509055562.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:02.543Z,1509055562.543 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:02.743Z,1509055562.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:02.779Z,1509055562.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:03.178Z,1509055563.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:03.204Z,1509055563.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:03.340Z,1509055563.340 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:03.550Z,1509055563.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:03.596Z,1509055563.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:03.744Z,1509055563.744 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:03.948Z,1509055563.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:03.965Z,1509055563.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:04.354Z,1509055564.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:04.370Z,1509055564.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:04.542Z,1509055564.542 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:04.751Z,1509055564.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:04.795Z,1509055564.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:05.181Z,1509055565.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:05.217Z,1509055565.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:05.339Z,1509055565.339 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:05.538Z,1509055565.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:05.584Z,1509055565.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:05.743Z,1509055565.743 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:05.961Z,1509055565.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:05.978Z,1509055565.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:06.364Z,1509055566.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:06.430Z,1509055566.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:06.542Z,1509055566.542 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:06.769Z,1509055566.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:06.822Z,1509055566.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:07.166Z,1509055567.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:07.195Z,1509055567.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:07.338Z,1509055567.338 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:07.539Z,1509055567.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:07.586Z,1509055567.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:07.743Z,1509055567.743 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:07.950Z,1509055567.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:07.985Z,1509055567.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:08.348Z,1509055568.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:08.385Z,1509055568.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:08.540Z,1509055568.540 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:08.749Z,1509055568.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:08.803Z,1509055568.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:09.162Z,1509055569.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:09.202Z,1509055569.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:09.337Z,1509055569.337 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:09.549Z,1509055569.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:09.600Z,1509055569.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:09.742Z,1509055569.742 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:09.952Z,1509055569.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:09.000Z,1509055570.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:10.343Z,1509055570.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:10.364Z,1509055570.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:10.535Z,1509055570.535 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:10.757Z,1509055570.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:10.774Z,1509055570.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:11.169Z,1509055571.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:11.185Z,1509055571.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:11.332Z,1509055571.332 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:11.554Z,1509055571.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:11.583Z,1509055571.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:11.737Z,1509055571.737 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:11.935Z,1509055571.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:11.976Z,1509055571.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:12.346Z,1509055572.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:12.374Z,1509055572.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:12.534Z,1509055572.534 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:12.752Z,1509055572.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:12.789Z,1509055572.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:13.166Z,1509055573.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:13.193Z,1509055573.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:13.331Z,1509055573.331 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:13.550Z,1509055573.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:13.566Z,1509055573.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:13.736Z,1509055573.736 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:13.951Z,1509055573.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:13.967Z,1509055573.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:14.353Z,1509055574.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:14.370Z,1509055574.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:14.535Z,1509055574.535 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:14.741Z,1509055574.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:14.782Z,1509055574.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:14.940Z,1509055574.940 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:15.142Z,1509055575.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:15.178Z,1509055575.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:15.423Z,1509055575.423 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:15.546Z,1509055575.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:15.583Z,1509055575.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:15.947Z,1509055575.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:15.979Z,1509055575.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:16.220Z,1509055576.220 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:16.340Z,1509055576.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:16.370Z,1509055576.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:16.624Z,1509055576.624 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:16.746Z,1509055576.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:16.763Z,1509055576.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:17.185Z,1509055577.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:17.209Z,1509055577.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:17.406Z,1509055577.406 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:17.552Z,1509055577.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:17.568Z,1509055577.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:17.975Z,1509055577.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:18.007Z,1509055578.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:18.203Z,1509055578.203 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:18.362Z,1509055578.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:18.385Z,1509055578.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:18.608Z,1509055578.608 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:18.736Z,1509055578.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:18.772Z,1509055578.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:19.162Z,1509055579.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:19.186Z,1509055579.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:19.363Z,1509055579.363 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:19.542Z,1509055579.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:19.578Z,1509055579.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:19.921Z,1509055579.921 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:06:19.949Z,1509055579.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:19.993Z,1509055579.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:20.158Z,1509055580.158 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:20.343Z,1509055580.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:20.360Z,1509055580.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:20.562Z,1509055580.562 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:20.744Z,1509055580.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:20.816Z,1509055580.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:21.168Z,1509055581.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:21.191Z,1509055581.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:21.360Z,1509055581.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:21.550Z,1509055581.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:21.582Z,1509055581.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:21.764Z,1509055581.764 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:21.977Z,1509055581.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:22.059Z,1509055582.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:22.339Z,1509055582.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:22.356Z,1509055582.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:22.550Z,1509055582.550 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:22.746Z,1509055582.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:22.784Z,1509055582.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:23.341Z,1509055583.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:23.343Z,1509055583.343 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:23.401Z,1509055583.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:23.733Z,1509055583.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:23.747Z,1509055583.747 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:23.755Z,1509055583.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:24.133Z,1509055584.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:24.199Z,1509055584.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:24.522Z,1509055584.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:24.541Z,1509055584.541 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:24.595Z,1509055584.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:24.945Z,1509055584.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:25.051Z,1509055585.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:25.328Z,1509055585.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:25.338Z,1509055585.338 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:25.361Z,1509055585.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:25.729Z,1509055585.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:25.743Z,1509055585.743 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:25.746Z,1509055585.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:26.140Z,1509055586.140 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:26.199Z,1509055586.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:26.517Z,1509055586.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:26.536Z,1509055586.536 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:26.554Z,1509055586.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:26.944Z,1509055586.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:27.030Z,1509055587.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:27.333Z,1509055587.333 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:27.339Z,1509055587.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:27.382Z,1509055587.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:27.719Z,1509055587.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:27.738Z,1509055587.738 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:27.759Z,1509055587.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:28.123Z,1509055588.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:28.176Z,1509055588.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:28.526Z,1509055588.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:28.535Z,1509055588.535 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:28.563Z,1509055588.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:28.969Z,1509055588.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:29.030Z,1509055589.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:29.323Z,1509055589.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:29.332Z,1509055589.332 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:29.368Z,1509055589.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:29.724Z,1509055589.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:29.737Z,1509055589.737 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:29.741Z,1509055589.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:30.139Z,1509055590.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:30.180Z,1509055590.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:30.530Z,1509055590.530 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:30.530Z,1509055590.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:30.546Z,1509055590.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:30.963Z,1509055590.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:31.007Z,1509055591.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:31.317Z,1509055591.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:31.327Z,1509055591.327 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:31.360Z,1509055591.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:31.717Z,1509055591.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:31.732Z,1509055591.732 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:31.757Z,1509055591.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:32.130Z,1509055592.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:32.190Z,1509055592.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:32.527Z,1509055592.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:32.529Z,1509055592.529 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:32.565Z,1509055592.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:32.992Z,1509055592.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:33.030Z,1509055593.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:33.323Z,1509055593.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:33.330Z,1509055593.330 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:33.388Z,1509055593.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:33.725Z,1509055593.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:33.735Z,1509055593.735 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:33.743Z,1509055593.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:34.153Z,1509055594.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:34.212Z,1509055594.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:34.529Z,1509055594.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:34.532Z,1509055594.532 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:34.567Z,1509055594.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:34.939Z,1509055594.939 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:34.966Z,1509055594.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:35.031Z,1509055595.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:35.333Z,1509055595.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:35.389Z,1509055595.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:35.458Z,1509055595.458 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:35.717Z,1509055595.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:35.747Z,1509055595.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:36.151Z,1509055596.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:36.180Z,1509055596.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:36.255Z,1509055596.255 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:36.528Z,1509055596.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:36.585Z,1509055596.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:36.660Z,1509055596.660 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:36.969Z,1509055596.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:37.011Z,1509055597.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:37.326Z,1509055597.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:37.376Z,1509055597.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:37.407Z,1509055597.407 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:37.731Z,1509055597.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:37.764Z,1509055597.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:38.143Z,1509055598.143 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:38.190Z,1509055598.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:38.210Z,1509055598.210 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:38.524Z,1509055598.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:38.546Z,1509055598.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:38.615Z,1509055598.615 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:38.969Z,1509055598.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:39.005Z,1509055599.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:39.323Z,1509055599.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:39.346Z,1509055599.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:39.408Z,1509055599.408 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:39.744Z,1509055599.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:39.752Z,1509055599.752 [BPC1](ERROR): Failed to receive battery data
2017-10-26T22:06:39.752Z,1509055599.752 [BPC1] Communications Fault, FailCount= 1
2017-10-26T22:06:39.752Z,1509055599.752 [BPC1](ERROR): Communications Fault
2017-10-26T22:06:39.762Z,1509055599.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:39.813Z,1509055599.813 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:39.869Z,1509055599.869 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T22:06:40.131Z,1509055600.131 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:40.196Z,1509055600.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:40.522Z,1509055600.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:40.553Z,1509055600.553 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:40.569Z,1509055600.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:40.953Z,1509055600.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:41.004Z,1509055601.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:41.079Z,1509055601.079 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:06:41.079Z,1509055601.079 [BPC1] No Fault, FailCount= 1
2017-10-26T22:06:41.316Z,1509055601.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:41.347Z,1509055601.347 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:41.429Z,1509055601.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:41.719Z,1509055601.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:41.736Z,1509055601.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:41.751Z,1509055601.751 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:42.136Z,1509055602.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:42.169Z,1509055602.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:42.524Z,1509055602.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:42.545Z,1509055602.545 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:42.562Z,1509055602.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:42.981Z,1509055602.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:43.047Z,1509055603.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:43.327Z,1509055603.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:43.343Z,1509055603.343 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:43.382Z,1509055603.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:43.729Z,1509055603.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:43.745Z,1509055603.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:43.746Z,1509055603.746 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:44.116Z,1509055604.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:44.184Z,1509055604.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:44.524Z,1509055604.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:44.540Z,1509055604.540 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:44.557Z,1509055604.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:44.978Z,1509055604.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:44.999Z,1509055604.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:45.334Z,1509055605.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:45.338Z,1509055605.338 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:45.383Z,1509055605.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:45.729Z,1509055605.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:45.742Z,1509055605.742 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:45.746Z,1509055605.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:46.139Z,1509055606.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:46.184Z,1509055606.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:46.531Z,1509055606.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:46.539Z,1509055606.539 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:46.577Z,1509055606.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:46.966Z,1509055606.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:47.006Z,1509055607.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:47.334Z,1509055607.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:47.336Z,1509055607.336 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:47.396Z,1509055607.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:47.729Z,1509055607.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:47.741Z,1509055607.741 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:47.746Z,1509055607.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:48.155Z,1509055608.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:48.184Z,1509055608.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:48.532Z,1509055608.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:48.538Z,1509055608.538 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:48.582Z,1509055608.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:48.943Z,1509055608.943 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:48.961Z,1509055608.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:49.009Z,1509055609.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:49.342Z,1509055609.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:49.396Z,1509055609.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:49.439Z,1509055609.439 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:49.731Z,1509055609.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:49.747Z,1509055609.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:50.146Z,1509055610.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:50.167Z,1509055610.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:50.237Z,1509055610.237 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:50.522Z,1509055610.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:50.554Z,1509055610.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:50.643Z,1509055610.643 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:51.067Z,1509055611.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:51.084Z,1509055611.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:51.371Z,1509055611.371 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:51.477Z,1509055611.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:51.494Z,1509055611.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:51.877Z,1509055611.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:51.894Z,1509055611.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:52.168Z,1509055612.168 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:52.278Z,1509055612.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:52.302Z,1509055612.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:52.573Z,1509055612.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:52.662Z,1509055612.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:52.705Z,1509055612.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:53.065Z,1509055613.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:53.099Z,1509055613.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:53.353Z,1509055613.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:53.465Z,1509055613.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:53.508Z,1509055613.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:53.872Z,1509055613.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:53.896Z,1509055613.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:54.152Z,1509055614.152 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:54.270Z,1509055614.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:54.299Z,1509055614.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:54.555Z,1509055614.555 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:54.666Z,1509055614.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:54.699Z,1509055614.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:55.072Z,1509055615.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:55.187Z,1509055615.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:55.348Z,1509055615.348 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:55.479Z,1509055615.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:55.521Z,1509055615.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:55.753Z,1509055615.753 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:55.874Z,1509055615.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:55.951Z,1509055615.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:56.273Z,1509055616.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:56.290Z,1509055616.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:56.546Z,1509055616.546 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:56.678Z,1509055616.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:56.735Z,1509055616.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:57.062Z,1509055617.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:57.151Z,1509055617.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:57.343Z,1509055617.343 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:57.462Z,1509055617.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:57.502Z,1509055617.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:57.750Z,1509055617.750 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:57.862Z,1509055617.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:57.903Z,1509055617.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:58.263Z,1509055618.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:58.300Z,1509055618.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:58.541Z,1509055618.541 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:58.670Z,1509055618.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:58.686Z,1509055618.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:59.067Z,1509055619.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:59.088Z,1509055619.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:59.339Z,1509055619.339 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:59.498Z,1509055619.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:59.537Z,1509055619.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:06:59.743Z,1509055619.743 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:59.879Z,1509055619.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:06:59.896Z,1509055619.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:00.270Z,1509055620.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:00.298Z,1509055620.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:00.541Z,1509055620.541 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:00.666Z,1509055620.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:00.696Z,1509055620.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:00.945Z,1509055620.945 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:01.086Z,1509055621.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:01.102Z,1509055621.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:01.354Z,1509055621.354 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:01.472Z,1509055621.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:01.508Z,1509055621.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:01.871Z,1509055621.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:01.888Z,1509055621.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:02.151Z,1509055622.151 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:02.273Z,1509055622.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:02.309Z,1509055622.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:02.556Z,1509055622.556 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:02.677Z,1509055622.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:02.694Z,1509055622.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:03.075Z,1509055623.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:03.091Z,1509055623.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:03.349Z,1509055623.349 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:03.480Z,1509055623.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:03.497Z,1509055623.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:03.754Z,1509055623.754 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:03.869Z,1509055623.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:03.896Z,1509055623.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:04.278Z,1509055624.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:04.295Z,1509055624.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:04.547Z,1509055624.547 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:04.685Z,1509055624.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:04.708Z,1509055624.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:05.065Z,1509055625.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:05.101Z,1509055625.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:05.344Z,1509055625.344 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:05.467Z,1509055625.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:05.504Z,1509055625.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:05.748Z,1509055625.748 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:06.007Z,1509055626.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:06.023Z,1509055626.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:06.403Z,1509055626.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:06.420Z,1509055626.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:06.546Z,1509055626.546 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:06.797Z,1509055626.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:06.829Z,1509055626.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:07.209Z,1509055627.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:07.252Z,1509055627.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:07.343Z,1509055627.343 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:07.600Z,1509055627.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:07.622Z,1509055627.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:07.748Z,1509055627.748 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:08.002Z,1509055628.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:08.023Z,1509055628.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:08.408Z,1509055628.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:08.425Z,1509055628.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:08.545Z,1509055628.545 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:08.806Z,1509055628.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:08.836Z,1509055628.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:09.192Z,1509055629.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:09.288Z,1509055629.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:09.347Z,1509055629.347 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:09.597Z,1509055629.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:09.633Z,1509055629.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:09.751Z,1509055629.751 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:09.996Z,1509055629.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:10.045Z,1509055630.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:10.400Z,1509055630.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:10.438Z,1509055630.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:10.544Z,1509055630.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:10.808Z,1509055630.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:10.942Z,1509055630.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:11.202Z,1509055631.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:11.219Z,1509055631.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:11.341Z,1509055631.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:11.610Z,1509055631.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:11.660Z,1509055631.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:11.746Z,1509055631.746 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:11.995Z,1509055631.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:12.029Z,1509055632.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:12.417Z,1509055632.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:12.463Z,1509055632.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:12.542Z,1509055632.542 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:12.816Z,1509055632.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:12.840Z,1509055632.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:13.201Z,1509055633.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:13.226Z,1509055633.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:13.340Z,1509055633.340 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:13.601Z,1509055633.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:13.626Z,1509055633.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:13.745Z,1509055633.745 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:13.999Z,1509055633.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:14.016Z,1509055634.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:14.402Z,1509055634.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:14.419Z,1509055634.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:14.542Z,1509055634.542 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:14.802Z,1509055634.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:14.820Z,1509055634.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:15.193Z,1509055635.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:15.231Z,1509055635.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:15.339Z,1509055635.339 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:15.598Z,1509055635.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:15.634Z,1509055635.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:15.744Z,1509055635.744 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:15.998Z,1509055635.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:16.015Z,1509055636.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:16.394Z,1509055636.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:16.410Z,1509055636.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:16.542Z,1509055636.542 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:16.801Z,1509055636.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:16.818Z,1509055636.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:17.198Z,1509055637.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:17.229Z,1509055637.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:17.339Z,1509055637.339 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:17.596Z,1509055637.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:17.625Z,1509055637.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:17.743Z,1509055637.743 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:17.993Z,1509055637.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:18.032Z,1509055638.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:18.400Z,1509055638.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:18.432Z,1509055638.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:18.536Z,1509055638.536 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:18.802Z,1509055638.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:18.838Z,1509055638.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:19.197Z,1509055639.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:19.230Z,1509055639.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:19.338Z,1509055639.338 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:19.598Z,1509055639.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:19.638Z,1509055639.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:19.742Z,1509055639.742 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:20.005Z,1509055640.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:20.041Z,1509055640.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:20.371Z,1509055640.371 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:07:20.393Z,1509055640.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:20.433Z,1509055640.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:20.540Z,1509055640.540 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:20.801Z,1509055640.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:20.837Z,1509055640.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:21.202Z,1509055641.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:21.234Z,1509055641.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:21.337Z,1509055641.337 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:21.595Z,1509055641.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:21.620Z,1509055641.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:21.741Z,1509055641.741 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:22.006Z,1509055642.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:22.051Z,1509055642.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:22.407Z,1509055642.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:22.423Z,1509055642.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:22.541Z,1509055642.541 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:22.804Z,1509055642.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:22.825Z,1509055642.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:23.207Z,1509055643.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:23.274Z,1509055643.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:23.341Z,1509055643.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:23.744Z,1509055643.744 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:23.814Z,1509055643.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:23.894Z,1509055643.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:24.220Z,1509055644.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:24.250Z,1509055644.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:24.538Z,1509055644.538 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:24.615Z,1509055644.615 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:24.651Z,1509055644.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:25.012Z,1509055645.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:25.051Z,1509055645.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:25.339Z,1509055645.339 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:25.421Z,1509055645.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:25.482Z,1509055645.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:25.744Z,1509055645.744 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:25.821Z,1509055645.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:25.838Z,1509055645.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:26.220Z,1509055646.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:26.279Z,1509055646.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:26.537Z,1509055646.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:26.611Z,1509055646.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:26.678Z,1509055646.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:27.016Z,1509055647.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:27.056Z,1509055647.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:27.334Z,1509055647.334 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:27.430Z,1509055647.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:27.461Z,1509055647.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:27.739Z,1509055647.739 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:27.823Z,1509055647.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:27.840Z,1509055647.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:28.230Z,1509055648.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:28.255Z,1509055648.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:28.536Z,1509055648.536 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:28.625Z,1509055648.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:28.642Z,1509055648.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:29.025Z,1509055649.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:29.067Z,1509055649.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:29.333Z,1509055649.333 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:29.420Z,1509055649.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:29.456Z,1509055649.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:29.738Z,1509055649.738 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:29.822Z,1509055649.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:29.838Z,1509055649.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:30.224Z,1509055650.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:30.241Z,1509055650.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:30.535Z,1509055650.535 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:30.626Z,1509055650.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:30.643Z,1509055650.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:30.940Z,1509055650.940 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:31.019Z,1509055651.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:31.035Z,1509055651.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:31.356Z,1509055651.356 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:31.422Z,1509055651.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:31.451Z,1509055651.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:31.822Z,1509055651.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:31.852Z,1509055651.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:32.154Z,1509055652.154 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:32.219Z,1509055652.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:32.248Z,1509055652.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:32.558Z,1509055652.558 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:32.616Z,1509055652.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:32.633Z,1509055652.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:33.028Z,1509055653.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:33.062Z,1509055653.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:33.351Z,1509055653.351 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:33.422Z,1509055653.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:33.438Z,1509055653.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:33.756Z,1509055653.756 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:33.836Z,1509055653.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:33.862Z,1509055653.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:34.227Z,1509055654.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:34.244Z,1509055654.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:34.553Z,1509055654.553 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:34.628Z,1509055654.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:34.645Z,1509055654.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:35.030Z,1509055655.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:35.060Z,1509055655.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:35.347Z,1509055655.347 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:35.420Z,1509055655.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:35.459Z,1509055655.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:35.751Z,1509055655.751 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:35.816Z,1509055655.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:35.857Z,1509055655.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:36.225Z,1509055656.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:36.260Z,1509055656.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:36.544Z,1509055656.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:36.622Z,1509055656.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:36.639Z,1509055656.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:37.031Z,1509055657.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:37.047Z,1509055657.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:37.342Z,1509055657.342 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:37.421Z,1509055657.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:37.454Z,1509055657.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:37.746Z,1509055657.746 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:37.828Z,1509055657.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:37.845Z,1509055657.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:38.229Z,1509055658.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:38.306Z,1509055658.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:38.539Z,1509055658.539 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:38.630Z,1509055658.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:38.694Z,1509055658.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:39.041Z,1509055659.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:39.070Z,1509055659.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:39.337Z,1509055659.337 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:39.427Z,1509055659.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:39.487Z,1509055659.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:39.741Z,1509055659.741 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:39.825Z,1509055659.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:39.841Z,1509055659.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:40.232Z,1509055660.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:40.286Z,1509055660.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:40.539Z,1509055660.539 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:40.619Z,1509055660.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:40.673Z,1509055660.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:41.017Z,1509055661.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:41.046Z,1509055661.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:41.336Z,1509055661.336 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:41.432Z,1509055661.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:41.464Z,1509055661.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:41.740Z,1509055661.740 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:41.818Z,1509055661.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:41.838Z,1509055661.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:42.217Z,1509055662.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:42.233Z,1509055662.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:42.538Z,1509055662.538 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:42.618Z,1509055662.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:42.642Z,1509055662.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:42.944Z,1509055662.944 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:43.037Z,1509055663.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:43.081Z,1509055663.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:43.422Z,1509055663.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:43.446Z,1509055663.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:43.451Z,1509055663.451 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:43.822Z,1509055663.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:43.838Z,1509055663.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:44.221Z,1509055664.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:44.242Z,1509055664.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:44.248Z,1509055664.248 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:44.632Z,1509055664.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:44.649Z,1509055664.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:44.653Z,1509055664.653 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:45.023Z,1509055665.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:45.039Z,1509055665.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:45.358Z,1509055665.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:45.424Z,1509055665.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:45.456Z,1509055665.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:45.815Z,1509055665.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:45.843Z,1509055665.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:46.155Z,1509055666.155 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:46.240Z,1509055666.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:46.282Z,1509055666.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:46.560Z,1509055666.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:46.614Z,1509055666.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:46.650Z,1509055666.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:47.029Z,1509055667.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:47.069Z,1509055667.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:47.354Z,1509055667.354 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:47.425Z,1509055667.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:47.461Z,1509055667.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:47.758Z,1509055667.758 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:47.829Z,1509055667.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:47.846Z,1509055667.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:48.229Z,1509055668.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:48.246Z,1509055668.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:48.551Z,1509055668.551 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:48.620Z,1509055668.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:48.646Z,1509055668.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:49.015Z,1509055669.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:49.042Z,1509055669.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:49.360Z,1509055669.360 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:49.434Z,1509055669.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:49.457Z,1509055669.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:49.816Z,1509055669.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:49.854Z,1509055669.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:50.153Z,1509055670.153 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:50.217Z,1509055670.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:50.250Z,1509055670.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:50.623Z,1509055670.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:50.678Z,1509055670.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:50.953Z,1509055670.953 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:51.029Z,1509055671.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:51.075Z,1509055671.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:51.430Z,1509055671.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:51.451Z,1509055671.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:51.472Z,1509055671.472 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:51.810Z,1509055671.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:51.856Z,1509055671.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:51.964Z,1509055671.964 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:52.214Z,1509055672.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:52.251Z,1509055672.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:52.619Z,1509055672.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:52.684Z,1509055672.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:52.757Z,1509055672.757 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:53.024Z,1509055673.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:53.089Z,1509055673.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:53.359Z,1509055673.359 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:53.426Z,1509055673.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:53.455Z,1509055673.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:53.828Z,1509055673.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:53.845Z,1509055673.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:54.156Z,1509055674.156 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:54.235Z,1509055674.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:54.290Z,1509055674.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:54.626Z,1509055674.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:54.642Z,1509055674.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:54.645Z,1509055674.645 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:55.011Z,1509055675.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:55.079Z,1509055675.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:55.354Z,1509055675.354 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:55.411Z,1509055675.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:55.464Z,1509055675.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:55.824Z,1509055675.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:55.861Z,1509055675.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:56.151Z,1509055676.151 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:56.227Z,1509055676.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:56.252Z,1509055676.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:56.556Z,1509055676.556 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:56.634Z,1509055676.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:56.650Z,1509055676.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:57.031Z,1509055677.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:57.060Z,1509055677.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:57.353Z,1509055677.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:57.415Z,1509055677.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:57.447Z,1509055677.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:57.757Z,1509055677.757 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:57.818Z,1509055677.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:57.850Z,1509055677.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:58.217Z,1509055678.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:58.241Z,1509055678.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:58.551Z,1509055678.551 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:58.631Z,1509055678.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:58.685Z,1509055678.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:59.028Z,1509055679.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:59.056Z,1509055679.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:59.344Z,1509055679.344 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:59.423Z,1509055679.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:59.440Z,1509055679.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:07:59.748Z,1509055679.748 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:59.829Z,1509055679.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:07:59.852Z,1509055679.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:00.225Z,1509055680.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:00.241Z,1509055680.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:00.542Z,1509055680.542 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:00.636Z,1509055680.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:00.657Z,1509055680.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:01.036Z,1509055681.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:01.052Z,1509055681.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:01.339Z,1509055681.339 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:01.418Z,1509055681.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:01.442Z,1509055681.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:01.743Z,1509055681.743 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:01.820Z,1509055681.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:01.836Z,1509055681.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:02.220Z,1509055682.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:02.248Z,1509055682.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:02.537Z,1509055682.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:02.627Z,1509055682.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:02.643Z,1509055682.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:03.026Z,1509055683.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:03.051Z,1509055683.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:03.334Z,1509055683.334 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:03.432Z,1509055683.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:03.469Z,1509055683.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:03.739Z,1509055683.739 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:03.828Z,1509055683.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:03.844Z,1509055683.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:04.229Z,1509055684.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:04.249Z,1509055684.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:04.532Z,1509055684.532 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:04.609Z,1509055684.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:04.643Z,1509055684.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:05.036Z,1509055685.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:05.065Z,1509055685.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:05.333Z,1509055685.333 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:05.430Z,1509055685.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:05.464Z,1509055685.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:05.738Z,1509055685.738 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:05.827Z,1509055685.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:05.843Z,1509055685.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:06.222Z,1509055686.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:06.245Z,1509055686.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:06.535Z,1509055686.535 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:06.617Z,1509055686.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:06.650Z,1509055686.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:06.940Z,1509055686.940 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:07.033Z,1509055687.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:07.054Z,1509055687.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:07.356Z,1509055687.356 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:07.420Z,1509055687.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:07.469Z,1509055687.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:07.819Z,1509055687.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:07.853Z,1509055687.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:08.154Z,1509055688.154 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:08.232Z,1509055688.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:08.265Z,1509055688.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:08.558Z,1509055688.558 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:08.628Z,1509055688.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:08.644Z,1509055688.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:09.028Z,1509055689.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:09.044Z,1509055689.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:09.351Z,1509055689.351 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:09.426Z,1509055689.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:09.443Z,1509055689.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:09.756Z,1509055689.756 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:09.829Z,1509055689.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:09.857Z,1509055689.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:10.232Z,1509055690.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:10.256Z,1509055690.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:10.549Z,1509055690.549 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:10.614Z,1509055690.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:10.631Z,1509055690.631 [BPC1](ERROR): Failed to receive battery data
2017-10-26T22:08:10.631Z,1509055690.631 [BPC1] Communications Fault, FailCount= 1
2017-10-26T22:08:10.631Z,1509055690.631 [BPC1](ERROR): Communications Fault
2017-10-26T22:08:10.649Z,1509055690.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:10.718Z,1509055690.718 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T22:08:11.014Z,1509055691.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:11.060Z,1509055691.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:11.342Z,1509055691.342 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:11.432Z,1509055691.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:11.465Z,1509055691.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:11.749Z,1509055691.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:11.829Z,1509055691.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:11.864Z,1509055691.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:11.976Z,1509055691.976 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:08:11.976Z,1509055691.976 [BPC1] No Fault, FailCount= 1
2017-10-26T22:08:12.227Z,1509055692.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:12.313Z,1509055692.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:12.540Z,1509055692.540 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:12.618Z,1509055692.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:12.647Z,1509055692.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:13.011Z,1509055693.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:13.052Z,1509055693.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:13.341Z,1509055693.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:13.427Z,1509055693.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:13.460Z,1509055693.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:13.746Z,1509055693.746 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:13.818Z,1509055693.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:13.834Z,1509055693.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:14.216Z,1509055694.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:14.236Z,1509055694.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:14.539Z,1509055694.539 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:14.643Z,1509055694.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:14.668Z,1509055694.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:15.028Z,1509055695.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:15.059Z,1509055695.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:15.336Z,1509055695.336 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:15.426Z,1509055695.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:15.443Z,1509055695.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:15.741Z,1509055695.741 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:15.828Z,1509055695.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:15.845Z,1509055695.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:16.230Z,1509055696.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:16.247Z,1509055696.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:16.534Z,1509055696.534 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:16.619Z,1509055696.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:16.651Z,1509055696.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:17.024Z,1509055697.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:17.081Z,1509055697.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:17.332Z,1509055697.332 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:17.424Z,1509055697.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:17.454Z,1509055697.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:17.736Z,1509055697.736 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:17.832Z,1509055697.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:17.856Z,1509055697.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:18.225Z,1509055698.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:18.249Z,1509055698.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:18.534Z,1509055698.534 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:18.630Z,1509055698.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:18.646Z,1509055698.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:19.034Z,1509055699.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:19.064Z,1509055699.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:19.331Z,1509055699.331 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:19.421Z,1509055699.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:19.450Z,1509055699.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:19.735Z,1509055699.735 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:19.827Z,1509055699.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:19.843Z,1509055699.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:20.305Z,1509055700.305 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:08:20.336Z,1509055700.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:20.373Z,1509055700.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:20.533Z,1509055700.533 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:20.738Z,1509055700.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:20.754Z,1509055700.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:20.939Z,1509055700.939 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:21.159Z,1509055701.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:21.202Z,1509055701.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:21.386Z,1509055701.386 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:21.543Z,1509055701.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:21.560Z,1509055701.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:21.924Z,1509055701.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:21.959Z,1509055701.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:22.183Z,1509055702.183 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:22.337Z,1509055702.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:22.371Z,1509055702.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:22.588Z,1509055702.588 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:22.724Z,1509055702.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:22.742Z,1509055702.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:23.146Z,1509055703.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:23.175Z,1509055703.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:23.357Z,1509055703.357 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:23.539Z,1509055703.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:23.590Z,1509055703.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:23.942Z,1509055703.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:23.961Z,1509055703.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:24.155Z,1509055704.155 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:24.343Z,1509055704.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:24.360Z,1509055704.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:24.560Z,1509055704.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:24.744Z,1509055704.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:24.761Z,1509055704.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:25.160Z,1509055705.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:25.176Z,1509055705.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:25.352Z,1509055705.352 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:25.533Z,1509055705.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:25.563Z,1509055705.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:25.757Z,1509055705.757 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:25.937Z,1509055705.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:25.963Z,1509055705.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:26.338Z,1509055706.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:26.366Z,1509055706.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:26.550Z,1509055706.550 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:26.738Z,1509055706.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:26.772Z,1509055706.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:27.150Z,1509055707.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:27.182Z,1509055707.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:27.347Z,1509055707.347 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:27.536Z,1509055707.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:27.561Z,1509055707.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:27.752Z,1509055707.752 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:27.943Z,1509055707.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:28.003Z,1509055708.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:28.327Z,1509055708.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:28.359Z,1509055708.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:28.545Z,1509055708.545 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:28.746Z,1509055708.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:28.803Z,1509055708.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:29.189Z,1509055709.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:29.234Z,1509055709.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:29.342Z,1509055709.342 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:29.564Z,1509055709.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:29.649Z,1509055709.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:29.747Z,1509055709.747 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:29.942Z,1509055709.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:29.987Z,1509055709.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:30.340Z,1509055710.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:30.376Z,1509055710.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:30.544Z,1509055710.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:30.738Z,1509055710.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:30.755Z,1509055710.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:31.147Z,1509055711.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:31.200Z,1509055711.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:31.345Z,1509055711.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:31.540Z,1509055711.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:31.557Z,1509055711.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:31.750Z,1509055711.750 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:31.946Z,1509055711.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:31.962Z,1509055711.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:32.448Z,1509055712.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:32.480Z,1509055712.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:32.544Z,1509055712.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:32.833Z,1509055712.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:32.853Z,1509055712.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:33.244Z,1509055713.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:33.265Z,1509055713.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:33.342Z,1509055713.342 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:33.626Z,1509055713.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:33.670Z,1509055713.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:33.749Z,1509055713.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:34.027Z,1509055714.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:34.060Z,1509055714.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:34.428Z,1509055714.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:34.463Z,1509055714.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:34.546Z,1509055714.546 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:34.836Z,1509055714.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:34.864Z,1509055714.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:35.231Z,1509055715.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:35.268Z,1509055715.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:35.344Z,1509055715.344 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:35.637Z,1509055715.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:35.653Z,1509055715.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:35.748Z,1509055715.748 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:36.035Z,1509055716.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:36.052Z,1509055716.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:36.441Z,1509055716.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:36.457Z,1509055716.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:36.546Z,1509055716.546 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:36.841Z,1509055716.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:36.856Z,1509055716.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:37.228Z,1509055717.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:37.248Z,1509055717.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:37.344Z,1509055717.344 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:37.625Z,1509055717.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:37.664Z,1509055717.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:37.747Z,1509055717.747 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:38.033Z,1509055718.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:38.062Z,1509055718.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:38.434Z,1509055718.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:38.450Z,1509055718.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:38.544Z,1509055718.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:38.836Z,1509055718.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:38.878Z,1509055718.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:38.949Z,1509055718.949 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:39.246Z,1509055719.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:39.263Z,1509055719.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:39.414Z,1509055719.414 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:39.627Z,1509055719.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:39.663Z,1509055719.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:40.041Z,1509055720.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:40.059Z,1509055720.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:40.211Z,1509055720.211 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:40.437Z,1509055720.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:40.474Z,1509055720.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:40.616Z,1509055720.616 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:40.833Z,1509055720.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:40.950Z,1509055720.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:41.232Z,1509055721.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:41.268Z,1509055721.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:41.409Z,1509055721.409 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:41.635Z,1509055721.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:41.671Z,1509055721.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:41.814Z,1509055721.814 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:42.036Z,1509055722.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:42.100Z,1509055722.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:42.426Z,1509055722.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:42.463Z,1509055722.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:42.551Z,1509055722.551 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:42.833Z,1509055722.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:42.865Z,1509055722.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:43.235Z,1509055723.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:43.286Z,1509055723.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:43.344Z,1509055723.344 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:43.629Z,1509055723.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:43.661Z,1509055723.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:43.749Z,1509055723.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:44.042Z,1509055724.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:44.102Z,1509055724.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:44.431Z,1509055724.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:44.489Z,1509055724.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:44.542Z,1509055724.542 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:44.826Z,1509055724.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:44.876Z,1509055724.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:45.233Z,1509055725.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:45.287Z,1509055725.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:45.339Z,1509055725.339 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:45.636Z,1509055725.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:45.694Z,1509055725.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:45.744Z,1509055725.744 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:46.041Z,1509055726.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:46.069Z,1509055726.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:46.450Z,1509055726.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:46.472Z,1509055726.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:46.537Z,1509055726.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:46.841Z,1509055726.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:46.863Z,1509055726.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:47.240Z,1509055727.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:47.275Z,1509055727.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:47.334Z,1509055727.334 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:47.639Z,1509055727.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:47.655Z,1509055727.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:47.739Z,1509055727.739 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:48.038Z,1509055728.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:48.054Z,1509055728.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:48.438Z,1509055728.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:48.457Z,1509055728.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:48.537Z,1509055728.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:48.841Z,1509055728.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:48.857Z,1509055728.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:49.232Z,1509055729.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:49.247Z,1509055729.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:49.338Z,1509055729.338 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:49.634Z,1509055729.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:49.651Z,1509055729.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:49.746Z,1509055729.746 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:50.030Z,1509055730.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:50.046Z,1509055730.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:50.433Z,1509055730.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:50.449Z,1509055730.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:50.544Z,1509055730.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:50.825Z,1509055730.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:50.858Z,1509055730.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:50.949Z,1509055730.949 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:51.238Z,1509055731.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:51.255Z,1509055731.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:51.429Z,1509055731.429 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:51.648Z,1509055731.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:51.665Z,1509055731.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:52.040Z,1509055732.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:52.057Z,1509055732.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:52.227Z,1509055732.227 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:52.436Z,1509055732.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:52.454Z,1509055732.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:52.631Z,1509055732.631 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:52.828Z,1509055732.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:52.865Z,1509055732.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:53.235Z,1509055733.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:53.252Z,1509055733.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:53.424Z,1509055733.424 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:53.644Z,1509055733.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:53.661Z,1509055733.661 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:53.661Z,1509055733.661 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 47
2017-10-26T22:08:53.661Z,1509055733.661 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:08:53.678Z,1509055733.678 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:53.678Z,1509055733.678 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 47
2017-10-26T22:08:53.678Z,1509055733.678 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:08:53.773Z,1509055733.773 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:08:53.773Z,1509055733.773 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:08:54.039Z,1509055734.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:54.114Z,1509055734.114 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:08:54.114Z,1509055734.114 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 47
2017-10-26T22:08:54.114Z,1509055734.114 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:08:54.114Z,1509055734.114 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 47
2017-10-26T22:08:54.221Z,1509055734.221 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:54.431Z,1509055734.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:54.466Z,1509055734.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:08:54.467Z,1509055734.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:08:54.467Z,1509055734.467 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:08:54.474Z,1509055734.474 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:08:54.475Z,1509055734.475 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:08:54.475Z,1509055734.475 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:08:54.626Z,1509055734.626 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:54.833Z,1509055734.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:54.858Z,1509055734.858 [BPC1](ERROR): Failed to parse message.
2017-10-26T22:08:54.858Z,1509055734.858 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T22:08:54.858Z,1509055734.858 [BPC1] Data Fault, FailCount= 1
2017-10-26T22:08:54.858Z,1509055734.858 [BPC1](ERROR): Data Fault
2017-10-26T22:08:54.867Z,1509055734.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:54.977Z,1509055734.977 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T22:08:55.234Z,1509055735.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:55.250Z,1509055735.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:55.419Z,1509055735.419 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:55.640Z,1509055735.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:55.661Z,1509055735.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:55.824Z,1509055735.824 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:56.039Z,1509055736.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:56.055Z,1509055736.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:56.162Z,1509055736.162 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:08:56.162Z,1509055736.162 [BPC1] No Fault, FailCount= 1
2017-10-26T22:08:56.443Z,1509055736.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:56.515Z,1509055736.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:56.553Z,1509055736.553 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:56.827Z,1509055736.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:56.867Z,1509055736.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:57.231Z,1509055737.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:57.283Z,1509055737.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:57.346Z,1509055737.346 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:57.630Z,1509055737.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:57.682Z,1509055737.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:57.750Z,1509055737.750 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:58.040Z,1509055738.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:58.056Z,1509055738.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:58.443Z,1509055738.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:58.459Z,1509055738.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:58.544Z,1509055738.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:58.840Z,1509055738.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:58.856Z,1509055738.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:59.341Z,1509055739.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:59.406Z,1509055739.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:59.431Z,1509055739.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:08:59.746Z,1509055739.746 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:59.807Z,1509055739.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:08:59.823Z,1509055739.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:00.208Z,1509055740.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:00.224Z,1509055740.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:00.539Z,1509055740.539 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:00.608Z,1509055740.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:00.681Z,1509055740.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:01.009Z,1509055741.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:01.026Z,1509055741.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:01.336Z,1509055741.336 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:01.417Z,1509055741.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:01.433Z,1509055741.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:01.741Z,1509055741.741 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:01.821Z,1509055741.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:01.862Z,1509055741.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:02.217Z,1509055742.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:02.233Z,1509055742.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:02.534Z,1509055742.534 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:02.597Z,1509055742.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:02.630Z,1509055742.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:03.004Z,1509055743.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:03.036Z,1509055743.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:03.331Z,1509055743.331 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:03.403Z,1509055743.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:03.431Z,1509055743.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:03.736Z,1509055743.736 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:03.812Z,1509055743.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:03.849Z,1509055743.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:04.206Z,1509055744.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:04.222Z,1509055744.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:04.529Z,1509055744.529 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:04.602Z,1509055744.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:04.636Z,1509055744.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:05.013Z,1509055745.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:05.067Z,1509055745.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:05.326Z,1509055745.326 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:05.401Z,1509055745.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:05.437Z,1509055745.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:05.731Z,1509055745.731 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:05.803Z,1509055745.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:05.841Z,1509055745.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:06.205Z,1509055746.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:06.230Z,1509055746.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:06.528Z,1509055746.528 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:06.606Z,1509055746.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:06.632Z,1509055746.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:06.935Z,1509055746.935 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:07.025Z,1509055747.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:07.062Z,1509055747.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:07.414Z,1509055747.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:07.449Z,1509055747.449 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:07.491Z,1509055747.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:07.812Z,1509055747.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:07.849Z,1509055747.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:08.210Z,1509055748.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:08.229Z,1509055748.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:08.251Z,1509055748.251 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:08.611Z,1509055748.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:08.655Z,1509055748.655 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:08.670Z,1509055748.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:09.037Z,1509055749.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:09.085Z,1509055749.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:09.417Z,1509055749.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:09.448Z,1509055749.448 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:09.463Z,1509055749.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:09.808Z,1509055749.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:09.836Z,1509055749.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:09.853Z,1509055749.853 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:10.201Z,1509055750.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:10.234Z,1509055750.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:10.550Z,1509055750.550 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:10.608Z,1509055750.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:10.664Z,1509055750.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:11.035Z,1509055751.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:11.149Z,1509055751.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:11.343Z,1509055751.343 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:11.396Z,1509055751.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:11.466Z,1509055751.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:11.748Z,1509055751.748 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:11.798Z,1509055751.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:11.864Z,1509055751.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:12.201Z,1509055752.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:12.236Z,1509055752.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:12.541Z,1509055752.541 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:12.603Z,1509055752.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:12.628Z,1509055752.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:13.016Z,1509055753.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:13.051Z,1509055753.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:13.339Z,1509055753.339 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:13.413Z,1509055753.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:13.429Z,1509055753.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:13.743Z,1509055753.743 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:13.813Z,1509055753.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:13.834Z,1509055753.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:14.219Z,1509055754.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:14.239Z,1509055754.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:14.536Z,1509055754.536 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:14.607Z,1509055754.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:14.624Z,1509055754.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:15.015Z,1509055755.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:15.036Z,1509055755.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:15.334Z,1509055755.334 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:15.410Z,1509055755.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:15.431Z,1509055755.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:15.831Z,1509055755.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:15.848Z,1509055755.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:16.047Z,1509055756.047 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:16.208Z,1509055756.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:16.233Z,1509055756.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:16.605Z,1509055756.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:16.626Z,1509055756.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:16.844Z,1509055756.844 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:17.004Z,1509055757.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:17.024Z,1509055757.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:17.406Z,1509055757.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:17.430Z,1509055757.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:17.553Z,1509055757.553 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:17.810Z,1509055757.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:17.831Z,1509055757.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:18.212Z,1509055758.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:18.257Z,1509055758.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:18.551Z,1509055758.551 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:18.600Z,1509055758.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:18.640Z,1509055758.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:19.047Z,1509055759.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:19.094Z,1509055759.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:19.344Z,1509055759.344 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:19.411Z,1509055759.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:19.448Z,1509055759.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:19.748Z,1509055759.748 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:19.816Z,1509055759.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:19.852Z,1509055759.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:20.203Z,1509055760.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:20.224Z,1509055760.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:20.542Z,1509055760.542 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:20.570Z,1509055760.570 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:09:20.610Z,1509055760.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:20.632Z,1509055760.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:21.017Z,1509055761.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:21.055Z,1509055761.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:21.343Z,1509055761.343 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:21.416Z,1509055761.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:21.448Z,1509055761.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:21.748Z,1509055761.748 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:21.810Z,1509055761.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:21.827Z,1509055761.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:22.206Z,1509055762.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:22.259Z,1509055762.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:22.545Z,1509055762.545 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:22.612Z,1509055762.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:22.630Z,1509055762.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:22.995Z,1509055762.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:23.023Z,1509055763.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:23.346Z,1509055763.346 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:23.421Z,1509055763.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:23.446Z,1509055763.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:23.751Z,1509055763.751 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:23.926Z,1509055763.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:23.990Z,1509055763.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:24.346Z,1509055764.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:24.391Z,1509055764.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:24.544Z,1509055764.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:24.735Z,1509055764.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:24.794Z,1509055764.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:25.182Z,1509055765.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:25.215Z,1509055765.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:25.345Z,1509055765.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:25.542Z,1509055765.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:25.585Z,1509055765.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:25.750Z,1509055765.750 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:25.937Z,1509055765.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:25.990Z,1509055765.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:26.343Z,1509055766.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:26.361Z,1509055766.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:26.543Z,1509055766.543 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:26.743Z,1509055766.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:26.761Z,1509055766.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:27.170Z,1509055767.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:27.208Z,1509055767.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:27.340Z,1509055767.340 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:27.545Z,1509055767.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:27.578Z,1509055767.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:27.745Z,1509055767.745 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:27.931Z,1509055767.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:27.961Z,1509055767.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:28.336Z,1509055768.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:28.377Z,1509055768.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:28.538Z,1509055768.538 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:28.733Z,1509055768.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:28.749Z,1509055768.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:29.164Z,1509055769.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:29.187Z,1509055769.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:29.335Z,1509055769.335 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:29.534Z,1509055769.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:29.567Z,1509055769.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:29.740Z,1509055769.740 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:29.937Z,1509055769.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:29.987Z,1509055769.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:30.345Z,1509055770.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:30.372Z,1509055770.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:30.533Z,1509055770.533 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:30.748Z,1509055770.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:30.772Z,1509055770.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:31.132Z,1509055771.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:31.185Z,1509055771.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:31.331Z,1509055771.331 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:31.540Z,1509055771.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:31.567Z,1509055771.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:31.735Z,1509055771.735 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:31.939Z,1509055771.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:31.958Z,1509055771.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:32.345Z,1509055772.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:32.364Z,1509055772.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:32.532Z,1509055772.532 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:32.735Z,1509055772.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:32.775Z,1509055772.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:32.937Z,1509055772.937 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:33.159Z,1509055773.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:33.191Z,1509055773.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:33.366Z,1509055773.366 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:33.532Z,1509055773.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:33.569Z,1509055773.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:33.932Z,1509055773.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:33.965Z,1509055773.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:34.163Z,1509055774.163 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:34.341Z,1509055774.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:34.407Z,1509055774.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:34.570Z,1509055774.570 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:34.739Z,1509055774.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:34.767Z,1509055774.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:35.134Z,1509055775.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:35.194Z,1509055775.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:35.361Z,1509055775.361 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:35.539Z,1509055775.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:35.579Z,1509055775.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:35.933Z,1509055775.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:35.974Z,1509055775.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:36.158Z,1509055776.158 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:36.339Z,1509055776.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:36.394Z,1509055776.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:36.563Z,1509055776.563 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:36.747Z,1509055776.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:36.805Z,1509055776.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:37.356Z,1509055777.356 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:37.386Z,1509055777.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:37.415Z,1509055777.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:37.750Z,1509055777.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:37.763Z,1509055777.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:37.791Z,1509055777.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:38.160Z,1509055778.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:38.251Z,1509055778.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:38.551Z,1509055778.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:38.554Z,1509055778.554 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:38.604Z,1509055778.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:39.015Z,1509055779.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:39.079Z,1509055779.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:39.342Z,1509055779.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:39.347Z,1509055779.347 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:39.396Z,1509055779.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:39.751Z,1509055779.751 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:39.754Z,1509055779.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:39.829Z,1509055779.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:40.178Z,1509055780.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:40.242Z,1509055780.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:40.545Z,1509055780.545 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:40.550Z,1509055780.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:40.598Z,1509055780.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:40.984Z,1509055780.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:41.025Z,1509055781.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:41.345Z,1509055781.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:41.358Z,1509055781.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:41.416Z,1509055781.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:41.753Z,1509055781.753 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:41.765Z,1509055781.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:41.810Z,1509055781.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:42.169Z,1509055782.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:42.205Z,1509055782.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:42.544Z,1509055782.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:42.558Z,1509055782.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:42.606Z,1509055782.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:42.968Z,1509055782.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:43.010Z,1509055783.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:43.341Z,1509055783.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:43.368Z,1509055783.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:43.410Z,1509055783.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:43.746Z,1509055783.746 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:43.769Z,1509055783.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:43.793Z,1509055783.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:44.179Z,1509055784.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:44.211Z,1509055784.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:44.543Z,1509055784.543 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:44.549Z,1509055784.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:44.586Z,1509055784.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:44.988Z,1509055784.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:45.013Z,1509055785.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:45.343Z,1509055785.343 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:45.360Z,1509055785.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:45.410Z,1509055785.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:45.753Z,1509055785.753 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:45.773Z,1509055785.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:45.801Z,1509055785.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:46.167Z,1509055786.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:46.204Z,1509055786.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:46.547Z,1509055786.547 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:46.571Z,1509055786.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:46.613Z,1509055786.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:46.964Z,1509055786.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:46.993Z,1509055786.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:47.346Z,1509055787.346 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:47.360Z,1509055787.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:47.408Z,1509055787.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:47.756Z,1509055787.756 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:47.781Z,1509055787.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:47.816Z,1509055787.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:48.166Z,1509055788.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:48.207Z,1509055788.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:48.554Z,1509055788.554 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:48.570Z,1509055788.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:48.615Z,1509055788.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:48.979Z,1509055788.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:49.021Z,1509055789.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:49.347Z,1509055789.347 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:49.374Z,1509055789.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:49.417Z,1509055789.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:49.751Z,1509055789.751 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:49.772Z,1509055789.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:49.796Z,1509055789.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:50.176Z,1509055790.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:50.202Z,1509055790.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:50.544Z,1509055790.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:50.556Z,1509055790.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:50.605Z,1509055790.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:50.979Z,1509055790.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:51.064Z,1509055791.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:51.341Z,1509055791.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:51.365Z,1509055791.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:51.420Z,1509055791.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:51.747Z,1509055791.747 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:51.760Z,1509055791.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:51.807Z,1509055791.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:52.176Z,1509055792.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:52.201Z,1509055792.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:52.543Z,1509055792.543 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:52.556Z,1509055792.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:52.641Z,1509055792.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:52.989Z,1509055792.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:53.016Z,1509055793.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:53.341Z,1509055793.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:53.366Z,1509055793.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:53.431Z,1509055793.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:53.745Z,1509055793.745 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:53.771Z,1509055793.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:53.799Z,1509055793.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:54.176Z,1509055794.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:54.240Z,1509055794.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:54.544Z,1509055794.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:54.700Z,1509055794.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:54.784Z,1509055794.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:55.103Z,1509055795.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:55.166Z,1509055795.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:55.340Z,1509055795.340 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:55.503Z,1509055795.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:55.519Z,1509055795.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:55.745Z,1509055795.745 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:55.922Z,1509055795.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:55.946Z,1509055795.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:56.312Z,1509055796.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:56.328Z,1509055796.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:56.538Z,1509055796.538 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:56.708Z,1509055796.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:56.731Z,1509055796.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:57.106Z,1509055797.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:57.163Z,1509055797.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:57.335Z,1509055797.335 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:57.505Z,1509055797.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:57.533Z,1509055797.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:57.740Z,1509055797.740 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:57.903Z,1509055797.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:57.936Z,1509055797.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:58.300Z,1509055798.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:58.332Z,1509055798.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:58.537Z,1509055798.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:58.707Z,1509055798.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:58.737Z,1509055798.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:59.100Z,1509055799.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:59.155Z,1509055799.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:59.334Z,1509055799.334 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:59.509Z,1509055799.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:59.525Z,1509055799.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:09:59.738Z,1509055799.738 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:59.914Z,1509055799.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:09:59.931Z,1509055799.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:00.297Z,1509055800.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:00.330Z,1509055800.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:00.532Z,1509055800.532 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:00.703Z,1509055800.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:00.732Z,1509055800.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:01.098Z,1509055801.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:01.156Z,1509055801.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:01.329Z,1509055801.329 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:01.507Z,1509055801.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:01.547Z,1509055801.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:01.734Z,1509055801.734 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:01.910Z,1509055801.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:01.927Z,1509055801.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:02.318Z,1509055802.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:02.335Z,1509055802.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:02.531Z,1509055802.531 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:02.701Z,1509055802.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:02.742Z,1509055802.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:02.936Z,1509055802.936 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:03.099Z,1509055803.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:03.149Z,1509055803.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:03.352Z,1509055803.352 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:03.514Z,1509055803.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:03.541Z,1509055803.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:03.913Z,1509055803.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:03.939Z,1509055803.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:04.150Z,1509055804.150 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:04.309Z,1509055804.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:04.330Z,1509055804.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:04.554Z,1509055804.554 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:04.701Z,1509055804.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:04.730Z,1509055804.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:05.114Z,1509055805.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:05.198Z,1509055805.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:05.347Z,1509055805.347 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:05.502Z,1509055805.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:05.531Z,1509055805.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:05.752Z,1509055805.752 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:05.906Z,1509055805.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:05.944Z,1509055805.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:06.307Z,1509055806.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:06.337Z,1509055806.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:06.545Z,1509055806.545 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:06.700Z,1509055806.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:06.716Z,1509055806.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:07.106Z,1509055807.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:07.233Z,1509055807.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:07.343Z,1509055807.343 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:07.499Z,1509055807.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:07.531Z,1509055807.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:07.747Z,1509055807.747 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:07.901Z,1509055807.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:07.992Z,1509055807.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:08.308Z,1509055808.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:08.341Z,1509055808.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:08.540Z,1509055808.540 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:08.711Z,1509055808.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:08.763Z,1509055808.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:09.113Z,1509055809.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:09.202Z,1509055809.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:09.341Z,1509055809.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:09.506Z,1509055809.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:09.532Z,1509055809.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:09.746Z,1509055809.746 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:09.912Z,1509055809.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:09.929Z,1509055809.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:10.315Z,1509055810.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:10.332Z,1509055810.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:10.540Z,1509055810.540 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:10.697Z,1509055810.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:10.735Z,1509055810.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:11.102Z,1509055811.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:11.157Z,1509055811.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:11.337Z,1509055811.337 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:11.507Z,1509055811.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:11.543Z,1509055811.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:11.741Z,1509055811.741 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:11.911Z,1509055811.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:11.943Z,1509055811.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:12.307Z,1509055812.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:12.323Z,1509055812.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:12.534Z,1509055812.534 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:12.706Z,1509055812.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:12.723Z,1509055812.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:13.128Z,1509055813.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:13.163Z,1509055813.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:13.332Z,1509055813.332 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:13.516Z,1509055813.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:13.561Z,1509055813.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:13.736Z,1509055813.736 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:13.914Z,1509055813.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:13.947Z,1509055813.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:14.303Z,1509055814.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:14.336Z,1509055814.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:14.534Z,1509055814.534 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:14.695Z,1509055814.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:14.719Z,1509055814.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:14.938Z,1509055814.938 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:15.104Z,1509055815.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:15.159Z,1509055815.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:15.351Z,1509055815.351 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:15.508Z,1509055815.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:15.525Z,1509055815.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:15.910Z,1509055815.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:15.937Z,1509055815.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:16.148Z,1509055816.148 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:16.308Z,1509055816.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:16.325Z,1509055816.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:16.553Z,1509055816.553 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:16.711Z,1509055816.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:16.728Z,1509055816.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:17.114Z,1509055817.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:17.142Z,1509055817.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:17.346Z,1509055817.346 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:17.502Z,1509055817.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:17.535Z,1509055817.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:17.751Z,1509055817.751 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:17.902Z,1509055817.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:17.934Z,1509055817.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:18.306Z,1509055818.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:18.322Z,1509055818.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:18.544Z,1509055818.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:18.710Z,1509055818.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:18.726Z,1509055818.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:19.113Z,1509055819.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:19.171Z,1509055819.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:19.341Z,1509055819.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:19.509Z,1509055819.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:19.525Z,1509055819.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:19.746Z,1509055819.746 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:19.905Z,1509055819.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:19.964Z,1509055819.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:20.311Z,1509055820.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:20.328Z,1509055820.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:20.539Z,1509055820.539 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:20.681Z,1509055820.681 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:10:20.727Z,1509055820.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:20.795Z,1509055820.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:21.101Z,1509055821.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:21.172Z,1509055821.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:21.336Z,1509055821.336 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:21.504Z,1509055821.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:21.543Z,1509055821.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:21.741Z,1509055821.741 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:21.899Z,1509055821.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:21.947Z,1509055821.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:22.307Z,1509055822.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:22.335Z,1509055822.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:22.538Z,1509055822.538 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:22.700Z,1509055822.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:22.741Z,1509055822.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:22.943Z,1509055822.943 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:23.104Z,1509055823.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:23.170Z,1509055823.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:23.367Z,1509055823.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:23.512Z,1509055823.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:23.529Z,1509055823.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:23.901Z,1509055823.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:23.930Z,1509055823.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:24.168Z,1509055824.168 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:24.306Z,1509055824.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:24.336Z,1509055824.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:24.573Z,1509055824.573 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:24.707Z,1509055824.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:24.736Z,1509055824.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:25.111Z,1509055825.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:25.190Z,1509055825.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:25.358Z,1509055825.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:25.507Z,1509055825.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:25.531Z,1509055825.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:25.897Z,1509055825.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:25.934Z,1509055825.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:26.156Z,1509055826.156 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:26.307Z,1509055826.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:26.349Z,1509055826.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:26.560Z,1509055826.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:26.706Z,1509055826.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:26.733Z,1509055826.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:27.104Z,1509055827.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:27.154Z,1509055827.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:27.349Z,1509055827.349 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:27.504Z,1509055827.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:27.533Z,1509055827.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:27.905Z,1509055827.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:27.921Z,1509055827.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:28.147Z,1509055828.147 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:28.314Z,1509055828.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:28.330Z,1509055828.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:28.551Z,1509055828.551 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:28.710Z,1509055828.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:28.726Z,1509055828.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:29.097Z,1509055829.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:29.162Z,1509055829.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:29.345Z,1509055829.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:29.506Z,1509055829.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:29.536Z,1509055829.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:29.749Z,1509055829.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:29.899Z,1509055829.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:29.932Z,1509055829.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:30.307Z,1509055830.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:30.343Z,1509055830.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:30.542Z,1509055830.542 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:30.711Z,1509055830.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:30.736Z,1509055830.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:31.103Z,1509055831.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:31.156Z,1509055831.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:31.340Z,1509055831.340 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:31.503Z,1509055831.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:31.540Z,1509055831.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:31.744Z,1509055831.744 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:31.911Z,1509055831.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:31.927Z,1509055831.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:32.301Z,1509055832.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:32.339Z,1509055832.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:32.537Z,1509055832.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:32.697Z,1509055832.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:32.733Z,1509055832.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:33.113Z,1509055833.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:33.163Z,1509055833.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:33.335Z,1509055833.335 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:33.509Z,1509055833.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:33.536Z,1509055833.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:33.739Z,1509055833.739 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:33.911Z,1509055833.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:33.928Z,1509055833.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:34.302Z,1509055834.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:34.323Z,1509055834.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:34.537Z,1509055834.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:34.717Z,1509055834.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:34.733Z,1509055834.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:35.094Z,1509055835.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:35.144Z,1509055835.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:35.334Z,1509055835.334 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:35.496Z,1509055835.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:35.552Z,1509055835.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:35.738Z,1509055835.738 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:35.904Z,1509055835.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:35.932Z,1509055835.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:36.303Z,1509055836.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:36.334Z,1509055836.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:36.536Z,1509055836.536 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:36.709Z,1509055836.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:36.735Z,1509055836.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:36.941Z,1509055836.941 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:37.104Z,1509055837.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:37.150Z,1509055837.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:37.353Z,1509055837.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:37.511Z,1509055837.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:37.544Z,1509055837.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:37.905Z,1509055837.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:37.922Z,1509055837.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:38.150Z,1509055838.150 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:38.308Z,1509055838.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:38.316Z,1509055838.316 [BPC1](ERROR): Failed to receive battery data
2017-10-26T22:10:38.316Z,1509055838.316 [BPC1] Communications Fault, FailCount= 1
2017-10-26T22:10:38.316Z,1509055838.316 [BPC1](ERROR): Communications Fault
2017-10-26T22:10:38.326Z,1509055838.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:38.453Z,1509055838.453 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T22:10:38.555Z,1509055838.555 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:38.710Z,1509055838.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:38.736Z,1509055838.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:39.112Z,1509055839.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:39.128Z,1509055839.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:39.356Z,1509055839.356 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:39.511Z,1509055839.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:39.539Z,1509055839.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:39.605Z,1509055839.605 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:10:39.605Z,1509055839.605 [BPC1] No Fault, FailCount= 1
2017-10-26T22:10:39.763Z,1509055839.763 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:39.903Z,1509055839.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:40.029Z,1509055840.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:40.327Z,1509055840.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:40.343Z,1509055840.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:40.550Z,1509055840.550 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:40.705Z,1509055840.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:40.738Z,1509055840.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:41.110Z,1509055841.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:41.163Z,1509055841.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:41.343Z,1509055841.343 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:41.521Z,1509055841.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:41.556Z,1509055841.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:41.748Z,1509055841.748 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:42.088Z,1509055842.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:42.192Z,1509055842.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:42.494Z,1509055842.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:42.529Z,1509055842.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:42.541Z,1509055842.541 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:42.894Z,1509055842.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:42.975Z,1509055842.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:43.303Z,1509055843.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:43.320Z,1509055843.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:43.338Z,1509055843.338 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:43.700Z,1509055843.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:43.716Z,1509055843.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:43.743Z,1509055843.743 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:44.102Z,1509055844.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:44.126Z,1509055844.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:44.507Z,1509055844.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:44.524Z,1509055844.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:44.537Z,1509055844.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:44.890Z,1509055844.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:44.997Z,1509055844.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:45.313Z,1509055845.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:45.329Z,1509055845.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:45.333Z,1509055845.333 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:45.701Z,1509055845.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:45.723Z,1509055845.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:45.738Z,1509055845.738 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:46.106Z,1509055846.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:46.141Z,1509055846.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:46.490Z,1509055846.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:46.527Z,1509055846.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:46.531Z,1509055846.531 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:46.958Z,1509055846.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:46.986Z,1509055846.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:47.284Z,1509055847.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:47.317Z,1509055847.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:47.329Z,1509055847.329 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:47.693Z,1509055847.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:47.725Z,1509055847.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:47.734Z,1509055847.734 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:48.089Z,1509055848.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:48.134Z,1509055848.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:48.492Z,1509055848.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:48.526Z,1509055848.526 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:48.528Z,1509055848.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:48.934Z,1509055848.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:49.015Z,1509055849.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:49.302Z,1509055849.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:49.318Z,1509055849.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:49.324Z,1509055849.324 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:49.715Z,1509055849.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:49.728Z,1509055849.728 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:49.734Z,1509055849.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:50.085Z,1509055850.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:50.109Z,1509055850.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:50.499Z,1509055850.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:50.525Z,1509055850.525 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:50.531Z,1509055850.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:50.969Z,1509055850.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:51.012Z,1509055851.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:51.304Z,1509055851.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:51.323Z,1509055851.323 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:51.357Z,1509055851.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:51.711Z,1509055851.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:51.728Z,1509055851.728 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:51.734Z,1509055851.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:52.089Z,1509055852.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:52.110Z,1509055852.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:52.498Z,1509055852.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:52.515Z,1509055852.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:52.524Z,1509055852.524 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:52.931Z,1509055852.931 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:52.948Z,1509055852.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:52.996Z,1509055852.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:53.296Z,1509055853.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:53.316Z,1509055853.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:53.442Z,1509055853.442 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:53.688Z,1509055853.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:53.727Z,1509055853.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:54.092Z,1509055854.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:54.192Z,1509055854.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:54.240Z,1509055854.240 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:54.492Z,1509055854.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:54.586Z,1509055854.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:54.644Z,1509055854.644 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:54.898Z,1509055854.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:55.001Z,1509055855.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:55.286Z,1509055855.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:55.314Z,1509055855.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:55.433Z,1509055855.433 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:55.689Z,1509055855.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:55.743Z,1509055855.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:56.090Z,1509055856.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:56.157Z,1509055856.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:56.230Z,1509055856.230 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:56.635Z,1509055856.635 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:56.636Z,1509055856.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:56.693Z,1509055856.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:57.033Z,1509055857.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:57.085Z,1509055857.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:57.428Z,1509055857.428 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:57.433Z,1509055857.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:57.461Z,1509055857.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:57.833Z,1509055857.833 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:57.861Z,1509055857.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:57.901Z,1509055857.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:58.241Z,1509055858.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:58.257Z,1509055858.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:58.550Z,1509055858.550 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:58.623Z,1509055858.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:58.665Z,1509055858.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:59.027Z,1509055859.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:59.069Z,1509055859.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:59.343Z,1509055859.343 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:59.425Z,1509055859.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:59.441Z,1509055859.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:10:59.748Z,1509055859.748 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:59.828Z,1509055859.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:10:59.849Z,1509055859.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:00.238Z,1509055860.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:00.259Z,1509055860.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:00.541Z,1509055860.541 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:00.639Z,1509055860.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:00.656Z,1509055860.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:01.034Z,1509055861.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:01.067Z,1509055861.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:01.338Z,1509055861.338 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:01.433Z,1509055861.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:01.449Z,1509055861.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:01.743Z,1509055861.743 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:01.831Z,1509055861.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:01.847Z,1509055861.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:02.232Z,1509055862.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:02.254Z,1509055862.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:02.536Z,1509055862.536 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:02.635Z,1509055862.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:02.652Z,1509055862.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:03.046Z,1509055863.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:03.075Z,1509055863.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:03.339Z,1509055863.339 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:03.424Z,1509055863.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:03.462Z,1509055863.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:03.742Z,1509055863.742 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:03.819Z,1509055863.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:03.866Z,1509055863.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:04.232Z,1509055864.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:04.260Z,1509055864.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:04.539Z,1509055864.539 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:04.629Z,1509055864.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:04.667Z,1509055864.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:05.032Z,1509055865.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:05.068Z,1509055865.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:05.336Z,1509055865.336 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:05.426Z,1509055865.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:05.463Z,1509055865.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:05.741Z,1509055865.741 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:05.827Z,1509055865.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:05.867Z,1509055865.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:06.230Z,1509055866.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:06.256Z,1509055866.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:06.538Z,1509055866.538 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:06.629Z,1509055866.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:06.666Z,1509055866.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:06.943Z,1509055866.943 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:07.037Z,1509055867.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:07.071Z,1509055867.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:07.370Z,1509055867.370 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:07.440Z,1509055867.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:07.465Z,1509055867.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:07.835Z,1509055867.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:07.851Z,1509055867.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:08.166Z,1509055868.166 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:08.230Z,1509055868.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:08.251Z,1509055868.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:08.569Z,1509055868.569 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:08.636Z,1509055868.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:08.653Z,1509055868.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:09.040Z,1509055869.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:09.167Z,1509055869.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:09.367Z,1509055869.367 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:09.432Z,1509055869.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:09.499Z,1509055869.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:09.771Z,1509055869.771 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:09.830Z,1509055869.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:09.951Z,1509055869.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:10.229Z,1509055870.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:10.281Z,1509055870.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:10.552Z,1509055870.552 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:10.639Z,1509055870.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:10.664Z,1509055870.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:11.029Z,1509055871.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:11.090Z,1509055871.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:11.346Z,1509055871.346 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:11.436Z,1509055871.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:11.467Z,1509055871.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:11.750Z,1509055871.750 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:11.834Z,1509055871.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:11.886Z,1509055871.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:12.236Z,1509055872.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:12.253Z,1509055872.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:12.544Z,1509055872.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:12.636Z,1509055872.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:12.652Z,1509055872.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:13.035Z,1509055873.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:13.052Z,1509055873.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:13.341Z,1509055873.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:13.437Z,1509055873.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:13.456Z,1509055873.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:13.745Z,1509055873.745 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:13.823Z,1509055873.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:13.861Z,1509055873.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:14.229Z,1509055874.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:14.260Z,1509055874.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:14.539Z,1509055874.539 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:14.624Z,1509055874.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:14.648Z,1509055874.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:15.023Z,1509055875.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:15.076Z,1509055875.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:15.336Z,1509055875.336 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:15.433Z,1509055875.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:15.449Z,1509055875.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:15.740Z,1509055875.740 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:15.831Z,1509055875.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:15.847Z,1509055875.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:16.237Z,1509055876.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:16.253Z,1509055876.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:16.538Z,1509055876.538 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:16.632Z,1509055876.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:16.648Z,1509055876.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:16.942Z,1509055876.942 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:17.020Z,1509055877.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:17.055Z,1509055877.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:17.355Z,1509055877.355 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:17.429Z,1509055877.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:17.470Z,1509055877.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:17.831Z,1509055877.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:17.848Z,1509055877.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:18.153Z,1509055878.153 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:18.238Z,1509055878.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:18.254Z,1509055878.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:18.557Z,1509055878.557 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:18.633Z,1509055878.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:18.649Z,1509055878.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:19.041Z,1509055879.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:19.089Z,1509055879.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:19.354Z,1509055879.354 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:19.429Z,1509055879.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:19.462Z,1509055879.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:19.759Z,1509055879.759 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:19.820Z,1509055879.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:19.859Z,1509055879.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:20.229Z,1509055880.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:20.267Z,1509055880.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:20.552Z,1509055880.552 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:20.630Z,1509055880.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:20.658Z,1509055880.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:21.021Z,1509055881.021 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:11:21.053Z,1509055881.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:21.070Z,1509055881.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:21.345Z,1509055881.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:21.427Z,1509055881.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:21.443Z,1509055881.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:21.750Z,1509055881.750 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:21.828Z,1509055881.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:21.844Z,1509055881.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:22.234Z,1509055882.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:22.271Z,1509055882.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:22.543Z,1509055882.543 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:22.625Z,1509055882.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:22.654Z,1509055882.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:23.036Z,1509055883.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:23.069Z,1509055883.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:23.340Z,1509055883.340 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:23.430Z,1509055883.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:23.460Z,1509055883.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:23.745Z,1509055883.745 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:23.832Z,1509055883.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:23.943Z,1509055883.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:24.230Z,1509055884.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:24.275Z,1509055884.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:24.538Z,1509055884.538 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:24.627Z,1509055884.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:24.666Z,1509055884.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:25.037Z,1509055885.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:25.085Z,1509055885.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:25.340Z,1509055885.340 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:25.435Z,1509055885.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:25.467Z,1509055885.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:25.744Z,1509055885.744 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:25.828Z,1509055885.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:25.882Z,1509055885.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:26.228Z,1509055886.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:26.293Z,1509055886.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:26.537Z,1509055886.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:26.630Z,1509055886.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:26.646Z,1509055886.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:27.038Z,1509055887.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:27.080Z,1509055887.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:27.335Z,1509055887.335 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:27.431Z,1509055887.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:27.452Z,1509055887.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:27.739Z,1509055887.739 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:27.838Z,1509055887.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:27.854Z,1509055887.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:28.239Z,1509055888.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:28.255Z,1509055888.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:28.536Z,1509055888.536 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:28.645Z,1509055888.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:28.661Z,1509055888.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:29.022Z,1509055889.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:29.062Z,1509055889.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:29.334Z,1509055889.334 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:29.572Z,1509055889.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:29.593Z,1509055889.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:29.738Z,1509055889.738 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:29.970Z,1509055889.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:29.993Z,1509055889.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:30.377Z,1509055890.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:30.415Z,1509055890.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:30.536Z,1509055890.536 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:30.771Z,1509055890.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:30.790Z,1509055890.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:30.942Z,1509055890.942 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:31.176Z,1509055891.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:31.201Z,1509055891.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:31.405Z,1509055891.405 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:31.561Z,1509055891.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:31.609Z,1509055891.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:31.963Z,1509055891.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:32.032Z,1509055892.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:32.202Z,1509055892.202 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:32.368Z,1509055892.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:32.414Z,1509055892.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:32.607Z,1509055892.607 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:32.764Z,1509055892.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:32.797Z,1509055892.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:33.173Z,1509055893.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:33.212Z,1509055893.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:33.402Z,1509055893.402 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:33.570Z,1509055893.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:33.630Z,1509055893.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:33.809Z,1509055893.809 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:33.978Z,1509055893.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:34.033Z,1509055894.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:34.365Z,1509055894.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:34.383Z,1509055894.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:34.554Z,1509055894.554 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:34.765Z,1509055894.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:34.787Z,1509055894.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:35.173Z,1509055895.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:35.194Z,1509055895.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:35.351Z,1509055895.351 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:35.593Z,1509055895.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:35.617Z,1509055895.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:35.755Z,1509055895.755 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:35.976Z,1509055895.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:35.994Z,1509055895.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:36.358Z,1509055896.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:36.388Z,1509055896.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:36.549Z,1509055896.549 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:36.763Z,1509055896.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:36.797Z,1509055896.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:37.158Z,1509055897.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:37.207Z,1509055897.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:37.347Z,1509055897.347 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:37.570Z,1509055897.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:37.607Z,1509055897.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:37.755Z,1509055897.755 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:37.962Z,1509055897.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:37.981Z,1509055897.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:38.366Z,1509055898.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:38.446Z,1509055898.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:38.552Z,1509055898.552 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:38.773Z,1509055898.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:38.791Z,1509055898.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:39.168Z,1509055899.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:39.238Z,1509055899.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:39.349Z,1509055899.349 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:39.571Z,1509055899.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:39.614Z,1509055899.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:39.754Z,1509055899.754 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:39.963Z,1509055899.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:40.016Z,1509055900.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:40.358Z,1509055900.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:40.377Z,1509055900.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:40.547Z,1509055900.547 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:40.775Z,1509055900.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:40.829Z,1509055900.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:41.170Z,1509055901.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:41.213Z,1509055901.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:41.344Z,1509055901.344 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:41.570Z,1509055901.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:41.611Z,1509055901.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:41.749Z,1509055901.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:41.967Z,1509055901.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:41.985Z,1509055901.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:42.366Z,1509055902.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:42.384Z,1509055902.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:42.546Z,1509055902.546 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:42.771Z,1509055902.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:42.789Z,1509055902.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:43.172Z,1509055903.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:43.202Z,1509055903.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:43.343Z,1509055903.343 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:43.566Z,1509055903.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:43.585Z,1509055903.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:43.751Z,1509055903.751 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:43.970Z,1509055903.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:43.989Z,1509055903.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:44.371Z,1509055904.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:44.394Z,1509055904.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:44.549Z,1509055904.549 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:44.770Z,1509055904.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:44.829Z,1509055904.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:45.161Z,1509055905.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:45.208Z,1509055905.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:45.342Z,1509055905.342 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:45.601Z,1509055905.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:45.685Z,1509055905.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:45.748Z,1509055905.748 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:46.002Z,1509055906.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:46.028Z,1509055906.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:46.353Z,1509055906.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:46.412Z,1509055906.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:46.540Z,1509055906.540 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:46.773Z,1509055906.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:46.791Z,1509055906.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:47.174Z,1509055907.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:47.193Z,1509055907.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:47.338Z,1509055907.338 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:47.577Z,1509055907.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:47.673Z,1509055907.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:47.744Z,1509055907.744 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:47.968Z,1509055907.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:47.985Z,1509055907.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:48.367Z,1509055908.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:48.394Z,1509055908.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:48.535Z,1509055908.535 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:48.778Z,1509055908.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:48.839Z,1509055908.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:49.178Z,1509055909.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:49.195Z,1509055909.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:49.333Z,1509055909.333 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:49.567Z,1509055909.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:49.593Z,1509055909.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:49.738Z,1509055909.738 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:49.966Z,1509055909.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:50.001Z,1509055910.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:50.373Z,1509055910.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:50.429Z,1509055910.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:50.535Z,1509055910.535 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:50.760Z,1509055910.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:50.827Z,1509055910.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:50.941Z,1509055910.941 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:51.177Z,1509055911.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:51.215Z,1509055911.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:51.436Z,1509055911.436 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:51.572Z,1509055911.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:51.594Z,1509055911.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:51.973Z,1509055911.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:51.992Z,1509055911.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:52.233Z,1509055912.233 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:52.493Z,1509055912.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:52.587Z,1509055912.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:52.638Z,1509055912.638 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:52.898Z,1509055912.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:53.001Z,1509055913.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:53.302Z,1509055913.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:53.381Z,1509055913.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:53.432Z,1509055913.432 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:53.707Z,1509055913.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:53.723Z,1509055913.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:53.836Z,1509055913.836 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:54.114Z,1509055914.114 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:54.211Z,1509055914.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:54.496Z,1509055914.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:54.557Z,1509055914.557 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:54.571Z,1509055914.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:54.571Z,1509055914.571 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 48
2017-10-26T22:11:54.571Z,1509055914.571 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:11:54.586Z,1509055914.586 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:54.586Z,1509055914.586 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 48
2017-10-26T22:11:54.586Z,1509055914.586 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:11:54.650Z,1509055914.650 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:11:54.650Z,1509055914.650 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:11:54.901Z,1509055914.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:55.075Z,1509055915.075 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:11:55.075Z,1509055915.075 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 48
2017-10-26T22:11:55.075Z,1509055915.075 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:11:55.076Z,1509055915.076 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 48
2017-10-26T22:11:55.295Z,1509055915.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:55.333Z,1509055915.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:11:55.334Z,1509055915.334 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:11:55.334Z,1509055915.334 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:11:55.336Z,1509055915.336 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:11:55.337Z,1509055915.337 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:11:55.337Z,1509055915.337 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:11:55.354Z,1509055915.354 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:55.696Z,1509055915.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:55.735Z,1509055915.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:55.767Z,1509055915.767 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:56.105Z,1509055916.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:56.161Z,1509055916.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:56.508Z,1509055916.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:56.552Z,1509055916.552 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:56.555Z,1509055916.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:56.903Z,1509055916.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:56.974Z,1509055916.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:57.292Z,1509055917.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:57.340Z,1509055917.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:57.349Z,1509055917.349 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:57.697Z,1509055917.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:57.730Z,1509055917.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:57.754Z,1509055917.754 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:58.115Z,1509055918.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:58.165Z,1509055918.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:58.497Z,1509055918.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:58.534Z,1509055918.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:58.547Z,1509055918.547 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:58.909Z,1509055918.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:58.950Z,1509055918.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:59.309Z,1509055919.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:59.325Z,1509055919.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:59.344Z,1509055919.344 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:59.708Z,1509055919.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:11:59.724Z,1509055919.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:11:59.749Z,1509055919.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:00.109Z,1509055920.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:00.163Z,1509055920.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:00.516Z,1509055920.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:00.532Z,1509055920.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:00.542Z,1509055920.542 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:00.902Z,1509055920.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:00.941Z,1509055920.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:01.306Z,1509055921.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:01.339Z,1509055921.339 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:01.365Z,1509055921.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:01.707Z,1509055921.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:01.744Z,1509055921.744 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:01.759Z,1509055921.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:02.104Z,1509055922.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:02.155Z,1509055922.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:02.507Z,1509055922.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:02.524Z,1509055922.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:02.537Z,1509055922.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:02.906Z,1509055922.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:02.922Z,1509055922.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:03.327Z,1509055923.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:03.335Z,1509055923.335 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:03.347Z,1509055923.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:03.715Z,1509055923.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:03.734Z,1509055923.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:03.739Z,1509055923.739 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:04.103Z,1509055924.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:04.135Z,1509055924.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:04.518Z,1509055924.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:04.532Z,1509055924.532 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:04.535Z,1509055924.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:04.911Z,1509055924.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:04.941Z,1509055924.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:05.305Z,1509055925.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:05.329Z,1509055925.329 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:05.345Z,1509055925.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:05.703Z,1509055925.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:05.727Z,1509055925.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:05.734Z,1509055925.734 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:06.224Z,1509055926.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:06.241Z,1509055926.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:06.527Z,1509055926.527 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:06.625Z,1509055926.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:06.710Z,1509055926.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:07.026Z,1509055927.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:07.046Z,1509055927.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:07.325Z,1509055927.325 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:07.454Z,1509055927.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:07.516Z,1509055927.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:07.729Z,1509055927.729 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:07.838Z,1509055927.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:07.864Z,1509055927.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:08.219Z,1509055928.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:08.272Z,1509055928.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:08.522Z,1509055928.522 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:08.625Z,1509055928.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:08.678Z,1509055928.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:09.026Z,1509055929.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:09.082Z,1509055929.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:09.320Z,1509055929.320 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:09.417Z,1509055929.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:09.456Z,1509055929.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:09.726Z,1509055929.726 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:09.822Z,1509055929.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:09.850Z,1509055929.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:10.227Z,1509055930.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:10.260Z,1509055930.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:10.522Z,1509055930.522 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:10.620Z,1509055930.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:10.646Z,1509055930.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:10.928Z,1509055930.928 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:11.026Z,1509055931.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:11.079Z,1509055931.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:11.427Z,1509055931.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:11.444Z,1509055931.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:11.479Z,1509055931.479 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:11.826Z,1509055931.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:11.842Z,1509055931.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:12.230Z,1509055932.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:12.246Z,1509055932.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:12.276Z,1509055932.276 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:12.625Z,1509055932.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:12.641Z,1509055932.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:12.681Z,1509055932.681 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:13.091Z,1509055933.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:13.154Z,1509055933.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:13.423Z,1509055933.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:13.468Z,1509055933.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:13.474Z,1509055933.474 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:13.821Z,1509055933.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:13.859Z,1509055933.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:13.879Z,1509055933.879 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:14.223Z,1509055934.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:14.247Z,1509055934.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:14.552Z,1509055934.552 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:14.629Z,1509055934.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:14.659Z,1509055934.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:15.027Z,1509055935.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:15.066Z,1509055935.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:15.345Z,1509055935.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:15.425Z,1509055935.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:15.442Z,1509055935.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:15.750Z,1509055935.750 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:15.821Z,1509055935.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:15.838Z,1509055935.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:16.224Z,1509055936.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:16.253Z,1509055936.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:16.543Z,1509055936.543 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:16.626Z,1509055936.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:16.654Z,1509055936.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:17.024Z,1509055937.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:17.057Z,1509055937.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:17.340Z,1509055937.340 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:17.418Z,1509055937.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:17.459Z,1509055937.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:17.823Z,1509055937.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:17.860Z,1509055937.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:18.069Z,1509055938.069 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:18.246Z,1509055938.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:18.270Z,1509055938.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:18.626Z,1509055938.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:18.662Z,1509055938.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:18.867Z,1509055938.867 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:19.028Z,1509055939.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:19.076Z,1509055939.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:19.428Z,1509055939.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:19.445Z,1509055939.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:19.551Z,1509055939.551 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:19.827Z,1509055939.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:19.844Z,1509055939.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:20.247Z,1509055940.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:20.279Z,1509055940.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:20.549Z,1509055940.549 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:20.727Z,1509055940.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:20.780Z,1509055940.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:21.136Z,1509055941.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:21.242Z,1509055941.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:21.346Z,1509055941.346 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:21.511Z,1509055941.511 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:12:21.544Z,1509055941.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:21.560Z,1509055941.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:21.751Z,1509055941.751 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:21.937Z,1509055941.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:21.998Z,1509055941.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:22.341Z,1509055942.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:22.357Z,1509055942.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:22.544Z,1509055942.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:22.733Z,1509055942.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:22.830Z,1509055942.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:23.128Z,1509055943.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:23.211Z,1509055943.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:23.342Z,1509055943.342 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:23.529Z,1509055943.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:23.572Z,1509055943.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:23.746Z,1509055943.746 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:23.926Z,1509055943.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:23.962Z,1509055943.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:24.328Z,1509055944.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:24.366Z,1509055944.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:24.543Z,1509055944.543 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:24.740Z,1509055944.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:24.765Z,1509055944.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:25.138Z,1509055945.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:25.194Z,1509055945.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:25.341Z,1509055945.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:25.537Z,1509055945.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:25.553Z,1509055945.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:25.745Z,1509055945.745 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:25.927Z,1509055945.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:25.952Z,1509055945.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:26.339Z,1509055946.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:26.360Z,1509055946.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:26.543Z,1509055946.543 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:26.724Z,1509055946.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:26.752Z,1509055946.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:26.948Z,1509055946.948 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:27.152Z,1509055947.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:27.169Z,1509055947.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:27.476Z,1509055947.476 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:27.530Z,1509055947.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:27.564Z,1509055947.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:27.920Z,1509055947.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:27.937Z,1509055947.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:28.273Z,1509055948.273 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:28.340Z,1509055948.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:28.374Z,1509055948.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:28.678Z,1509055948.678 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:28.744Z,1509055948.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:28.761Z,1509055948.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:29.147Z,1509055949.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:29.169Z,1509055949.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:29.471Z,1509055949.471 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:29.541Z,1509055949.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:29.574Z,1509055949.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:29.876Z,1509055949.876 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:29.937Z,1509055949.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:29.958Z,1509055949.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:30.334Z,1509055950.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:30.385Z,1509055950.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:30.549Z,1509055950.549 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:30.723Z,1509055950.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:30.763Z,1509055950.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:31.150Z,1509055951.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:31.171Z,1509055951.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:31.342Z,1509055951.342 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:31.543Z,1509055951.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:31.632Z,1509055951.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:31.929Z,1509055951.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:31.961Z,1509055951.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:32.099Z,1509055952.099 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:32.339Z,1509055952.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:32.359Z,1509055952.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:32.552Z,1509055952.552 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:32.726Z,1509055952.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:32.763Z,1509055952.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:33.139Z,1509055953.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:33.172Z,1509055953.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:33.345Z,1509055953.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:33.533Z,1509055953.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:33.635Z,1509055953.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:33.942Z,1509055953.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:33.959Z,1509055953.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:34.098Z,1509055954.098 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:34.328Z,1509055954.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:34.361Z,1509055954.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:34.551Z,1509055954.551 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:34.733Z,1509055954.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:34.798Z,1509055954.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:35.149Z,1509055955.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:35.195Z,1509055955.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:35.348Z,1509055955.348 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:35.541Z,1509055955.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:35.597Z,1509055955.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:35.753Z,1509055955.753 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:35.938Z,1509055955.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:35.954Z,1509055955.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:36.337Z,1509055956.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:36.392Z,1509055956.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:36.546Z,1509055956.546 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:36.728Z,1509055956.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:36.763Z,1509055956.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:37.159Z,1509055957.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:37.217Z,1509055957.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:37.343Z,1509055957.343 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:37.530Z,1509055957.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:37.562Z,1509055957.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:37.748Z,1509055957.748 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:37.937Z,1509055957.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:37.999Z,1509055957.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:38.338Z,1509055958.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:38.370Z,1509055958.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:38.541Z,1509055958.541 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:38.730Z,1509055958.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:38.747Z,1509055958.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:39.149Z,1509055959.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:39.219Z,1509055959.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:39.343Z,1509055959.343 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:39.534Z,1509055959.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:39.558Z,1509055959.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:39.747Z,1509055959.747 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:39.928Z,1509055959.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:39.952Z,1509055959.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:40.342Z,1509055960.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:40.359Z,1509055960.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:40.544Z,1509055960.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:40.741Z,1509055960.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:40.760Z,1509055960.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:41.127Z,1509055961.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:41.165Z,1509055961.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:41.345Z,1509055961.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:41.535Z,1509055961.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:41.563Z,1509055961.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:41.750Z,1509055961.750 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:41.935Z,1509055961.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:41.964Z,1509055961.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:42.330Z,1509055962.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:42.346Z,1509055962.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:42.543Z,1509055962.543 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:42.738Z,1509055962.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:42.785Z,1509055962.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:43.139Z,1509055963.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:43.170Z,1509055963.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:43.341Z,1509055963.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:43.523Z,1509055963.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:43.563Z,1509055963.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:43.745Z,1509055963.745 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:43.927Z,1509055963.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:43.971Z,1509055963.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:44.336Z,1509055964.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:44.369Z,1509055964.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:44.538Z,1509055964.538 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:44.738Z,1509055964.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:44.775Z,1509055964.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:45.137Z,1509055965.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:45.173Z,1509055965.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:45.336Z,1509055965.336 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:45.535Z,1509055965.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:45.552Z,1509055965.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:45.928Z,1509055965.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:45.965Z,1509055965.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:46.093Z,1509055966.093 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:46.328Z,1509055966.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:46.359Z,1509055966.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:46.752Z,1509055966.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:46.774Z,1509055966.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:46.891Z,1509055966.891 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:47.128Z,1509055967.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:47.169Z,1509055967.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:47.541Z,1509055967.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:47.558Z,1509055967.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:47.587Z,1509055967.587 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:47.933Z,1509055967.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:47.963Z,1509055967.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:48.325Z,1509055968.325 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:48.369Z,1509055968.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:48.553Z,1509055968.553 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:48.728Z,1509055968.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:48.745Z,1509055968.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:49.150Z,1509055969.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:49.186Z,1509055969.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:49.346Z,1509055969.346 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:49.547Z,1509055969.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:49.569Z,1509055969.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:49.751Z,1509055969.751 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:49.943Z,1509055969.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:50.017Z,1509055970.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:50.329Z,1509055970.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:50.369Z,1509055970.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:50.544Z,1509055970.544 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:50.735Z,1509055970.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:50.808Z,1509055970.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:51.153Z,1509055971.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:51.186Z,1509055971.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:51.341Z,1509055971.341 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:51.540Z,1509055971.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:51.598Z,1509055971.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:51.745Z,1509055971.745 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:51.939Z,1509055971.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:52.002Z,1509055972.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:52.337Z,1509055972.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:52.353Z,1509055972.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:52.539Z,1509055972.539 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:52.728Z,1509055972.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:52.756Z,1509055972.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:53.148Z,1509055973.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:53.189Z,1509055973.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:53.336Z,1509055973.336 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:53.526Z,1509055973.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:53.559Z,1509055973.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:53.741Z,1509055973.741 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:53.926Z,1509055973.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:53.963Z,1509055973.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:54.335Z,1509055974.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:54.352Z,1509055974.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:54.534Z,1509055974.534 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:54.730Z,1509055974.730 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:54.754Z,1509055974.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:55.153Z,1509055975.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:55.203Z,1509055975.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:55.331Z,1509055975.331 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:55.525Z,1509055975.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:55.562Z,1509055975.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:55.736Z,1509055975.736 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:55.938Z,1509055975.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:55.972Z,1509055975.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:56.330Z,1509055976.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:56.375Z,1509055976.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:56.533Z,1509055976.533 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:56.731Z,1509055976.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:56.763Z,1509055976.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:57.141Z,1509055977.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:57.172Z,1509055977.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:57.330Z,1509055977.330 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:57.536Z,1509055977.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:57.569Z,1509055977.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:57.735Z,1509055977.735 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:57.933Z,1509055977.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:57.951Z,1509055977.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:58.333Z,1509055978.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:58.354Z,1509055978.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:58.533Z,1509055978.533 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:58.732Z,1509055978.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:58.760Z,1509055978.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:58.939Z,1509055978.939 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:59.137Z,1509055979.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:59.164Z,1509055979.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:59.353Z,1509055979.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:59.544Z,1509055979.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:59.560Z,1509055979.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:12:59.933Z,1509055979.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:12:59.949Z,1509055979.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:00.151Z,1509055980.151 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:00.331Z,1509055980.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:00.357Z,1509055980.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:00.555Z,1509055980.555 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:00.731Z,1509055980.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:00.759Z,1509055980.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:01.151Z,1509055981.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:01.173Z,1509055981.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:01.352Z,1509055981.352 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:01.550Z,1509055981.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:01.566Z,1509055981.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:01.757Z,1509055981.757 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:01.940Z,1509055981.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:01.977Z,1509055981.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:02.331Z,1509055982.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:02.348Z,1509055982.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:02.732Z,1509055982.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:02.748Z,1509055982.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:03.159Z,1509055983.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:03.194Z,1509055983.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:03.546Z,1509055983.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:03.563Z,1509055983.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:03.936Z,1509055983.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:03.995Z,1509055983.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:04.331Z,1509055984.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:04.403Z,1509055984.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:04.739Z,1509055984.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:04.765Z,1509055984.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:05.176Z,1509055985.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:05.237Z,1509055985.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:05.527Z,1509055985.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:05.543Z,1509055985.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:06.096Z,1509055986.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:06.201Z,1509055986.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:06.502Z,1509055986.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:06.554Z,1509055986.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:06.942Z,1509055986.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:06.987Z,1509055986.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:07.299Z,1509055987.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:07.338Z,1509055987.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:07.700Z,1509055987.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:07.731Z,1509055987.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:08.096Z,1509055988.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:08.139Z,1509055988.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:08.500Z,1509055988.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:08.515Z,1509055988.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:08.892Z,1509055988.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:08.993Z,1509055988.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:09.309Z,1509055989.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:09.325Z,1509055989.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:09.705Z,1509055989.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:09.721Z,1509055989.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:10.108Z,1509055990.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:10.167Z,1509055990.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:10.500Z,1509055990.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:10.530Z,1509055990.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:10.898Z,1509055990.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:11.008Z,1509055991.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:11.301Z,1509055991.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:11.317Z,1509055991.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:11.698Z,1509055991.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:11.715Z,1509055991.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:12.109Z,1509055992.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:12.157Z,1509055992.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:12.503Z,1509055992.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:12.524Z,1509055992.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:12.949Z,1509055992.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:12.997Z,1509055992.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:13.302Z,1509055993.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:13.336Z,1509055993.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:13.703Z,1509055993.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:13.720Z,1509055993.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:14.101Z,1509055994.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:14.149Z,1509055994.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:14.509Z,1509055994.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:14.529Z,1509055994.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:14.899Z,1509055994.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:14.000Z,1509055995.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:15.296Z,1509055995.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:15.327Z,1509055995.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:15.698Z,1509055995.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:15.749Z,1509055995.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:16.097Z,1509055996.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:16.154Z,1509055996.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:16.496Z,1509055996.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:16.536Z,1509055996.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:16.902Z,1509055996.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:16.988Z,1509055996.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:17.297Z,1509055997.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:17.335Z,1509055997.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:17.713Z,1509055997.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:17.728Z,1509055997.728 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T22:13:17.728Z,1509055997.728 [BPC1] Data Fault, FailCount= 1
2017-10-26T22:13:17.728Z,1509055997.728 [BPC1](ERROR): Data Fault
2017-10-26T22:13:17.750Z,1509055997.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:17.859Z,1509055997.859 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T22:13:18.105Z,1509055998.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:18.151Z,1509055998.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:18.507Z,1509055998.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:18.524Z,1509055998.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:18.551Z,1509055998.551 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:18.907Z,1509055998.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:19.008Z,1509055999.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:19.138Z,1509055999.138 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:13:19.138Z,1509055999.138 [BPC1] No Fault, FailCount= 1
2017-10-26T22:13:19.294Z,1509055999.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:19.345Z,1509055999.345 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:19.423Z,1509055999.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:19.699Z,1509055999.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:19.732Z,1509055999.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:19.749Z,1509055999.749 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:20.095Z,1509056000.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:20.160Z,1509056000.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:20.498Z,1509056000.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:20.514Z,1509056000.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:20.542Z,1509056000.542 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:20.899Z,1509056000.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:20.988Z,1509056000.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:21.293Z,1509056001.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:21.337Z,1509056001.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:21.340Z,1509056001.340 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:21.676Z,1509056001.676 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:13:21.696Z,1509056001.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:21.732Z,1509056001.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:21.744Z,1509056001.744 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:22.220Z,1509056002.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:22.257Z,1509056002.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:22.537Z,1509056002.537 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:22.631Z,1509056002.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:22.648Z,1509056002.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:23.033Z,1509056003.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:23.086Z,1509056003.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:23.339Z,1509056003.339 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:23.421Z,1509056003.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:23.465Z,1509056003.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:23.743Z,1509056003.743 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:23.828Z,1509056003.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:23.850Z,1509056003.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:24.212Z,1509056004.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:24.248Z,1509056004.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:24.536Z,1509056004.536 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:24.611Z,1509056004.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:24.631Z,1509056004.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:25.026Z,1509056005.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:25.066Z,1509056005.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:25.334Z,1509056005.334 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:25.428Z,1509056005.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:25.483Z,1509056005.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:25.738Z,1509056005.738 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:25.818Z,1509056005.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:25.834Z,1509056005.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:26.216Z,1509056006.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:26.251Z,1509056006.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:26.536Z,1509056006.536 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:26.618Z,1509056006.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:26.642Z,1509056006.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:27.029Z,1509056007.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:27.074Z,1509056007.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:27.333Z,1509056007.333 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:27.430Z,1509056007.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:27.451Z,1509056007.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:27.737Z,1509056007.737 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:27.832Z,1509056007.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:27.858Z,1509056007.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:28.216Z,1509056008.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:28.244Z,1509056008.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:28.535Z,1509056008.535 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:28.621Z,1509056008.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:28.656Z,1509056008.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:28.942Z,1509056008.942 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:29.028Z,1509056009.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:29.070Z,1509056009.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:29.424Z,1509056009.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:29.440Z,1509056009.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:29.476Z,1509056009.476 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:29.811Z,1509056009.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:29.847Z,1509056009.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:30.219Z,1509056010.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:30.252Z,1509056010.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:30.290Z,1509056010.290 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:30.619Z,1509056010.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:30.659Z,1509056010.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:30.694Z,1509056010.694 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:31.027Z,1509056011.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:31.066Z,1509056011.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:31.421Z,1509056011.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:31.437Z,1509056011.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:31.459Z,1509056011.459 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:31.830Z,1509056011.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:31.882Z,1509056011.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:32.250Z,1509056012.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:32.256Z,1509056012.256 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:32.327Z,1509056012.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:32.632Z,1509056012.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:32.649Z,1509056012.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:32.661Z,1509056012.661 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:33.018Z,1509056013.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:33.078Z,1509056013.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:33.358Z,1509056013.358 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:33.422Z,1509056013.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:33.447Z,1509056013.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:33.826Z,1509056013.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:33.875Z,1509056013.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:34.156Z,1509056014.156 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:34.208Z,1509056014.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:34.262Z,1509056014.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:34.560Z,1509056014.560 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:34.632Z,1509056014.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:34.668Z,1509056014.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:35.020Z,1509056015.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:35.068Z,1509056015.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:35.353Z,1509056015.353 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:35.425Z,1509056015.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:35.449Z,1509056015.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:35.760Z,1509056015.760 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:35.826Z,1509056015.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:35.854Z,1509056015.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:36.227Z,1509056016.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:36.249Z,1509056016.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:36.554Z,1509056016.554 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:36.628Z,1509056016.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:36.671Z,1509056016.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:37.028Z,1509056017.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:37.073Z,1509056017.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:37.348Z,1509056017.348 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:37.419Z,1509056017.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:37.448Z,1509056017.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:37.753Z,1509056017.753 [CTD_Seabird](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:37.826Z,1509056017.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:37.863Z,1509056017.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:38.220Z,1509056018.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:38.252Z,1509056018.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:38.621Z,1509056018.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:38.637Z,1509056018.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:39.030Z,1509056019.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:39.056Z,1509056019.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:39.409Z,1509056019.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:39.445Z,1509056019.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:39.819Z,1509056019.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:39.860Z,1509056019.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:40.216Z,1509056020.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:40.247Z,1509056020.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:40.623Z,1509056020.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:40.659Z,1509056020.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:41.018Z,1509056021.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:41.041Z,1509056021.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:41.437Z,1509056021.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:41.470Z,1509056021.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:41.828Z,1509056021.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:41.844Z,1509056021.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:42.224Z,1509056022.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:42.240Z,1509056022.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:42.610Z,1509056022.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:42.643Z,1509056022.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:43.040Z,1509056023.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:43.085Z,1509056023.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:43.420Z,1509056023.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:43.447Z,1509056023.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:43.824Z,1509056023.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:43.859Z,1509056023.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:44.221Z,1509056024.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:44.241Z,1509056024.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:44.732Z,1509056024.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:44.783Z,1509056024.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:45.155Z,1509056025.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:45.180Z,1509056025.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:45.538Z,1509056025.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:45.554Z,1509056025.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:45.940Z,1509056025.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:45.969Z,1509056025.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:46.342Z,1509056026.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:46.430Z,1509056026.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:46.739Z,1509056026.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:46.761Z,1509056026.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:47.160Z,1509056027.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:47.222Z,1509056027.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:47.531Z,1509056027.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:47.556Z,1509056027.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:47.933Z,1509056027.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:47.995Z,1509056027.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:48.328Z,1509056028.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:48.344Z,1509056028.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:48.733Z,1509056028.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:48.785Z,1509056028.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:49.169Z,1509056029.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:49.185Z,1509056029.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:49.545Z,1509056029.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:49.588Z,1509056029.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:49.944Z,1509056029.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:49.980Z,1509056029.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:50.338Z,1509056030.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:50.367Z,1509056030.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:50.739Z,1509056030.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:50.755Z,1509056030.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:51.127Z,1509056031.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:51.186Z,1509056031.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:51.533Z,1509056031.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:51.573Z,1509056031.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:51.937Z,1509056031.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:51.976Z,1509056031.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:52.333Z,1509056032.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:52.365Z,1509056032.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:52.739Z,1509056032.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:52.768Z,1509056032.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:53.161Z,1509056033.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:53.194Z,1509056033.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:53.534Z,1509056033.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:53.559Z,1509056033.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:53.927Z,1509056033.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:53.995Z,1509056033.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:54.332Z,1509056034.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:54.367Z,1509056034.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:54.733Z,1509056034.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:54.754Z,1509056034.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:55.144Z,1509056035.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:55.180Z,1509056035.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:55.551Z,1509056035.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:55.584Z,1509056035.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:55.938Z,1509056035.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:55.954Z,1509056035.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:56.341Z,1509056036.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:56.366Z,1509056036.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:56.736Z,1509056036.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:56.764Z,1509056036.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:57.166Z,1509056037.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:57.189Z,1509056037.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:57.541Z,1509056037.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:57.567Z,1509056037.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:57.932Z,1509056037.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:57.960Z,1509056037.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:58.344Z,1509056038.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:58.376Z,1509056038.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:58.739Z,1509056038.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:58.772Z,1509056038.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:59.168Z,1509056039.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:59.190Z,1509056039.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:59.534Z,1509056039.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:59.562Z,1509056039.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:13:59.936Z,1509056039.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:13:59.952Z,1509056039.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:00.343Z,1509056040.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:00.396Z,1509056040.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:00.731Z,1509056040.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:00.756Z,1509056040.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:01.157Z,1509056041.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:01.212Z,1509056041.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:01.532Z,1509056041.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:01.556Z,1509056041.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:01.940Z,1509056041.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:01.997Z,1509056041.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:02.343Z,1509056042.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:02.398Z,1509056042.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:02.725Z,1509056042.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:02.766Z,1509056042.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:03.136Z,1509056043.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:03.178Z,1509056043.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:03.537Z,1509056043.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:03.562Z,1509056043.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:03.942Z,1509056043.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:03.976Z,1509056043.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:04.335Z,1509056044.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:04.351Z,1509056044.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:04.740Z,1509056044.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:04.785Z,1509056044.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:05.161Z,1509056045.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:05.194Z,1509056045.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:05.541Z,1509056045.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:05.570Z,1509056045.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:05.933Z,1509056045.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:05.951Z,1509056045.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:06.333Z,1509056046.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:06.370Z,1509056046.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:06.733Z,1509056046.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:06.750Z,1509056046.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:07.156Z,1509056047.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:07.190Z,1509056047.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:07.540Z,1509056047.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:07.635Z,1509056047.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:07.926Z,1509056047.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:07.962Z,1509056047.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:08.334Z,1509056048.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:08.364Z,1509056048.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:08.733Z,1509056048.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:08.772Z,1509056048.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:09.162Z,1509056049.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:09.183Z,1509056049.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:09.535Z,1509056049.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:09.629Z,1509056049.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:09.938Z,1509056049.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:09.955Z,1509056049.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:10.338Z,1509056050.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:10.362Z,1509056050.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:10.743Z,1509056050.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:10.760Z,1509056050.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:11.156Z,1509056051.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:11.172Z,1509056051.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:11.535Z,1509056051.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:11.566Z,1509056051.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:11.932Z,1509056051.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:11.964Z,1509056051.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:12.340Z,1509056052.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:12.368Z,1509056052.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:12.737Z,1509056052.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:12.754Z,1509056052.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:13.154Z,1509056053.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:13.210Z,1509056053.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:13.540Z,1509056053.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:13.556Z,1509056053.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:13.927Z,1509056053.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:13.963Z,1509056053.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:14.331Z,1509056054.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:14.404Z,1509056054.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:14.732Z,1509056054.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:14.768Z,1509056054.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:15.147Z,1509056055.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:15.172Z,1509056055.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:15.537Z,1509056055.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:15.597Z,1509056055.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:15.943Z,1509056055.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:15.959Z,1509056055.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:16.342Z,1509056056.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:16.419Z,1509056056.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:16.735Z,1509056056.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:16.768Z,1509056056.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:17.148Z,1509056057.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:17.202Z,1509056057.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:17.544Z,1509056057.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:17.568Z,1509056057.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:17.935Z,1509056057.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:17.951Z,1509056057.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:18.342Z,1509056058.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:18.364Z,1509056058.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:18.740Z,1509056058.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:18.766Z,1509056058.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:19.135Z,1509056059.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:19.177Z,1509056059.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:19.536Z,1509056059.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:19.561Z,1509056059.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:19.942Z,1509056059.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:19.960Z,1509056059.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:20.342Z,1509056060.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:20.359Z,1509056060.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:20.740Z,1509056060.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:20.768Z,1509056060.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:21.159Z,1509056061.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:21.179Z,1509056061.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:21.527Z,1509056061.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:21.602Z,1509056061.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:21.917Z,1509056061.917 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:14:21.936Z,1509056061.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:21.985Z,1509056061.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:22.083Z,1509056062.083 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T22:14:22.334Z,1509056062.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:22.358Z,1509056062.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:22.740Z,1509056062.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:22.757Z,1509056062.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:23.256Z,1509056063.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:23.272Z,1509056063.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:23.669Z,1509056063.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:23.722Z,1509056063.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:24.057Z,1509056064.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:24.073Z,1509056064.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:24.467Z,1509056064.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:24.490Z,1509056064.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:24.850Z,1509056064.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:24.887Z,1509056064.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:25.250Z,1509056065.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:25.273Z,1509056065.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:25.655Z,1509056065.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:25.671Z,1509056065.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:26.055Z,1509056066.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:26.071Z,1509056066.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:26.461Z,1509056066.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:26.500Z,1509056066.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:26.847Z,1509056066.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:26.880Z,1509056066.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:27.255Z,1509056067.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:27.292Z,1509056067.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:27.664Z,1509056067.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:27.700Z,1509056067.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:28.081Z,1509056068.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:28.162Z,1509056068.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:28.476Z,1509056068.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:28.517Z,1509056068.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:28.854Z,1509056068.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:28.949Z,1509056068.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:29.250Z,1509056069.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:29.311Z,1509056069.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:29.660Z,1509056069.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:29.697Z,1509056069.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:30.058Z,1509056070.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:30.103Z,1509056070.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:30.456Z,1509056070.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:30.491Z,1509056070.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:30.853Z,1509056070.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:30.954Z,1509056070.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:31.268Z,1509056071.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:31.323Z,1509056071.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:31.666Z,1509056071.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:31.699Z,1509056071.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:32.085Z,1509056072.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:32.157Z,1509056072.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:32.455Z,1509056072.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:32.492Z,1509056072.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:32.860Z,1509056072.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:32.954Z,1509056072.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:33.278Z,1509056073.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:33.294Z,1509056073.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:33.694Z,1509056073.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:33.745Z,1509056073.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:34.052Z,1509056074.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:34.092Z,1509056074.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:34.455Z,1509056074.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:34.492Z,1509056074.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:34.851Z,1509056074.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:34.938Z,1509056074.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:35.260Z,1509056075.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:35.285Z,1509056075.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:35.662Z,1509056075.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:35.685Z,1509056075.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:36.059Z,1509056076.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:36.076Z,1509056076.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:36.548Z,1509056076.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:36.596Z,1509056076.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:36.977Z,1509056076.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:37.026Z,1509056077.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:37.357Z,1509056077.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:37.419Z,1509056077.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:37.773Z,1509056077.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:37.821Z,1509056077.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:38.181Z,1509056078.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:38.215Z,1509056078.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:38.572Z,1509056078.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:38.589Z,1509056078.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:38.979Z,1509056078.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:39.022Z,1509056079.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:39.357Z,1509056079.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:39.403Z,1509056079.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:39.763Z,1509056079.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:39.819Z,1509056079.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:40.169Z,1509056080.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:40.200Z,1509056080.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:40.560Z,1509056080.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:40.609Z,1509056080.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:40.978Z,1509056080.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:41.036Z,1509056081.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:41.365Z,1509056081.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:41.402Z,1509056081.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:41.757Z,1509056081.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:41.779Z,1509056081.779 [PNI_TCM](ERROR): CRC does not match. Expected:0x61927 got:0x1797
2017-10-26T22:14:41.842Z,1509056081.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:42.177Z,1509056082.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:42.216Z,1509056082.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:42.556Z,1509056082.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:42.595Z,1509056082.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:42.987Z,1509056082.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:43.053Z,1509056083.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:43.376Z,1509056083.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:43.421Z,1509056083.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:43.750Z,1509056083.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:43.820Z,1509056083.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:44.176Z,1509056084.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:44.231Z,1509056084.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:44.568Z,1509056084.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:44.604Z,1509056084.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:44.995Z,1509056084.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:45.052Z,1509056085.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:45.360Z,1509056085.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:45.418Z,1509056085.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:45.768Z,1509056085.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:45.804Z,1509056085.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:46.171Z,1509056086.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:46.205Z,1509056086.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:46.566Z,1509056086.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:46.596Z,1509056086.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:46.988Z,1509056086.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:47.040Z,1509056087.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:47.355Z,1509056087.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:47.398Z,1509056087.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:47.754Z,1509056087.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:47.803Z,1509056087.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:48.178Z,1509056088.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:48.211Z,1509056088.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:48.559Z,1509056088.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:48.612Z,1509056088.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:48.969Z,1509056088.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:49.046Z,1509056089.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:49.386Z,1509056089.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:49.418Z,1509056089.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:49.762Z,1509056089.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:49.785Z,1509056089.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:50.183Z,1509056090.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:50.227Z,1509056090.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:50.562Z,1509056090.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:50.595Z,1509056090.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:50.973Z,1509056090.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:51.032Z,1509056091.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:51.372Z,1509056091.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:51.400Z,1509056091.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:51.756Z,1509056091.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:51.811Z,1509056091.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:52.168Z,1509056092.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:52.194Z,1509056092.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:52.562Z,1509056092.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:52.586Z,1509056092.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:53.071Z,1509056093.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:53.149Z,1509056093.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:53.366Z,1509056093.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:53.413Z,1509056093.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:53.863Z,1509056093.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:53.888Z,1509056093.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:54.273Z,1509056094.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:54.289Z,1509056094.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:54.685Z,1509056094.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:54.702Z,1509056094.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:55.059Z,1509056095.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:55.115Z,1509056095.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:55.459Z,1509056095.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:55.496Z,1509056095.496 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:55.496Z,1509056095.496 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 49
2017-10-26T22:14:55.496Z,1509056095.496 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:14:55.509Z,1509056095.509 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:55.509Z,1509056095.509 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 49
2017-10-26T22:14:55.509Z,1509056095.509 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:14:55.666Z,1509056095.666 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:14:55.666Z,1509056095.666 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:14:55.856Z,1509056095.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:55.918Z,1509056095.918 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:14:55.918Z,1509056095.918 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 49
2017-10-26T22:14:55.918Z,1509056095.918 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:14:55.918Z,1509056095.918 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 49
2017-10-26T22:14:56.264Z,1509056096.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:56.304Z,1509056096.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:14:56.305Z,1509056096.305 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:14:56.305Z,1509056096.305 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:14:56.312Z,1509056096.312 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:14:56.312Z,1509056096.312 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:14:56.313Z,1509056096.313 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:14:56.661Z,1509056096.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:56.677Z,1509056096.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:57.070Z,1509056097.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:57.093Z,1509056097.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:57.464Z,1509056097.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:57.527Z,1509056097.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:57.869Z,1509056097.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:57.888Z,1509056097.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:58.255Z,1509056098.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:58.319Z,1509056098.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:58.652Z,1509056098.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:58.689Z,1509056098.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:59.094Z,1509056099.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:59.164Z,1509056099.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:59.461Z,1509056099.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:59.494Z,1509056099.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:14:59.862Z,1509056099.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:14:59.908Z,1509056099.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:00.268Z,1509056100.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:00.303Z,1509056100.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:00.664Z,1509056100.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:00.680Z,1509056100.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:01.081Z,1509056101.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:01.155Z,1509056101.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:01.470Z,1509056101.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:01.496Z,1509056101.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:01.855Z,1509056101.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:01.895Z,1509056101.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:02.262Z,1509056102.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:02.293Z,1509056102.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:02.666Z,1509056102.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:02.692Z,1509056102.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:03.055Z,1509056103.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:03.071Z,1509056103.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:03.467Z,1509056103.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:03.484Z,1509056103.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:03.861Z,1509056103.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:03.877Z,1509056103.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:04.275Z,1509056104.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:04.331Z,1509056104.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:04.662Z,1509056104.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:04.678Z,1509056104.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:05.061Z,1509056105.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:05.086Z,1509056105.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:05.457Z,1509056105.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:05.473Z,1509056105.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:05.857Z,1509056105.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:05.873Z,1509056105.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:06.260Z,1509056106.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:06.289Z,1509056106.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:06.670Z,1509056106.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:06.699Z,1509056106.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:07.070Z,1509056107.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:07.109Z,1509056107.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:07.458Z,1509056107.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:07.483Z,1509056107.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:07.867Z,1509056107.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:07.887Z,1509056107.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:08.276Z,1509056108.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:08.313Z,1509056108.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:08.666Z,1509056108.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:08.683Z,1509056108.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:09.052Z,1509056109.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:09.089Z,1509056109.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:09.457Z,1509056109.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:09.497Z,1509056109.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:09.856Z,1509056109.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:09.888Z,1509056109.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:10.264Z,1509056110.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:10.311Z,1509056110.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:10.664Z,1509056110.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:10.712Z,1509056110.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:11.061Z,1509056111.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:11.077Z,1509056111.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:11.474Z,1509056111.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:11.490Z,1509056111.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:11.856Z,1509056111.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:11.909Z,1509056111.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:12.261Z,1509056112.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:12.291Z,1509056112.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:12.662Z,1509056112.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:12.710Z,1509056112.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:13.061Z,1509056113.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:13.111Z,1509056113.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:13.464Z,1509056113.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:13.493Z,1509056113.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:13.870Z,1509056113.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:13.920Z,1509056113.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:14.258Z,1509056114.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:14.303Z,1509056114.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:14.669Z,1509056114.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:14.685Z,1509056114.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:15.068Z,1509056115.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:15.090Z,1509056115.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:15.461Z,1509056115.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:15.489Z,1509056115.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:15.856Z,1509056115.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:15.885Z,1509056115.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:16.261Z,1509056116.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:16.331Z,1509056116.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:16.656Z,1509056116.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:16.695Z,1509056116.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:17.080Z,1509056117.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:17.098Z,1509056117.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:17.461Z,1509056117.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:17.501Z,1509056117.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:17.855Z,1509056117.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:17.872Z,1509056117.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:18.266Z,1509056118.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:18.282Z,1509056118.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:18.662Z,1509056118.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:18.679Z,1509056118.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:19.061Z,1509056119.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:19.078Z,1509056119.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:19.488Z,1509056119.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:19.528Z,1509056119.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:19.868Z,1509056119.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:19.884Z,1509056119.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:20.267Z,1509056120.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:20.284Z,1509056120.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:20.656Z,1509056120.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:20.693Z,1509056120.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:21.061Z,1509056121.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:21.089Z,1509056121.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:21.456Z,1509056121.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:21.489Z,1509056121.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:21.835Z,1509056121.835 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:15:21.862Z,1509056121.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:21.895Z,1509056121.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:22.266Z,1509056122.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:22.282Z,1509056122.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:22.665Z,1509056122.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:22.681Z,1509056122.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:23.063Z,1509056123.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:23.079Z,1509056123.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:23.468Z,1509056123.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:23.485Z,1509056123.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:23.862Z,1509056123.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:23.886Z,1509056123.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:24.258Z,1509056124.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:24.286Z,1509056124.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:24.652Z,1509056124.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:24.709Z,1509056124.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:25.053Z,1509056125.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:25.096Z,1509056125.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:25.470Z,1509056125.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:25.496Z,1509056125.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:25.866Z,1509056125.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:25.919Z,1509056125.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:26.263Z,1509056126.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:26.295Z,1509056126.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:26.659Z,1509056126.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:26.688Z,1509056126.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:27.060Z,1509056127.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:27.109Z,1509056127.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:27.466Z,1509056127.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:27.483Z,1509056127.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:27.867Z,1509056127.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:27.918Z,1509056127.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:28.267Z,1509056128.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:28.323Z,1509056128.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:28.675Z,1509056128.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:28.704Z,1509056128.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:29.068Z,1509056129.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:29.092Z,1509056129.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:29.456Z,1509056129.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:29.485Z,1509056129.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:29.856Z,1509056129.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:29.894Z,1509056129.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:30.257Z,1509056130.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:30.285Z,1509056130.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:30.660Z,1509056130.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:30.702Z,1509056130.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:31.054Z,1509056131.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:31.095Z,1509056131.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:31.457Z,1509056131.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:31.474Z,1509056131.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:31.858Z,1509056131.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:31.900Z,1509056131.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:32.261Z,1509056132.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:32.277Z,1509056132.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:32.662Z,1509056132.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:32.677Z,1509056132.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:33.072Z,1509056133.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:33.116Z,1509056133.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:33.467Z,1509056133.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:33.483Z,1509056133.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:33.872Z,1509056133.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:33.888Z,1509056133.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:34.272Z,1509056134.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:34.289Z,1509056134.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:34.656Z,1509056134.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:34.693Z,1509056134.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:35.083Z,1509056135.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:35.099Z,1509056135.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:35.468Z,1509056135.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:35.499Z,1509056135.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:35.859Z,1509056135.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:35.879Z,1509056135.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:36.261Z,1509056136.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:36.278Z,1509056136.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:36.662Z,1509056136.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:36.683Z,1509056136.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:37.067Z,1509056137.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:37.089Z,1509056137.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:37.456Z,1509056137.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:37.500Z,1509056137.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:37.861Z,1509056137.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:37.894Z,1509056137.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:38.258Z,1509056138.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:38.290Z,1509056138.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:38.658Z,1509056138.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:38.719Z,1509056138.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:39.067Z,1509056139.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:39.084Z,1509056139.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:39.460Z,1509056139.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:39.493Z,1509056139.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:39.875Z,1509056139.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:39.897Z,1509056139.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:40.266Z,1509056140.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:40.326Z,1509056140.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:40.657Z,1509056140.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:40.685Z,1509056140.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:41.078Z,1509056141.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:41.103Z,1509056141.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:41.467Z,1509056141.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:41.524Z,1509056141.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:41.868Z,1509056141.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:41.889Z,1509056141.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:42.270Z,1509056142.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:42.318Z,1509056142.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:42.669Z,1509056142.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:42.725Z,1509056142.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:43.080Z,1509056143.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:43.096Z,1509056143.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:43.471Z,1509056143.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:43.488Z,1509056143.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:43.849Z,1509056143.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:43.877Z,1509056143.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:44.282Z,1509056144.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:44.301Z,1509056144.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:44.657Z,1509056144.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:44.689Z,1509056144.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:45.076Z,1509056145.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:45.093Z,1509056145.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:45.457Z,1509056145.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:45.482Z,1509056145.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:45.863Z,1509056145.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:45.879Z,1509056145.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:46.270Z,1509056146.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:46.286Z,1509056146.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:46.663Z,1509056146.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:46.679Z,1509056146.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:47.077Z,1509056147.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:47.142Z,1509056147.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:47.463Z,1509056147.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:47.479Z,1509056147.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:47.857Z,1509056147.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:47.881Z,1509056147.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:48.264Z,1509056148.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:48.288Z,1509056148.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:48.752Z,1509056148.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:48.800Z,1509056148.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:49.165Z,1509056149.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:49.203Z,1509056149.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:49.559Z,1509056149.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:49.580Z,1509056149.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:49.961Z,1509056149.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:49.984Z,1509056149.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:50.367Z,1509056150.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:50.384Z,1509056150.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:50.766Z,1509056150.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:50.782Z,1509056150.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:51.167Z,1509056151.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:51.205Z,1509056151.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:51.558Z,1509056151.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:51.591Z,1509056151.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:51.957Z,1509056151.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:51.974Z,1509056151.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:52.360Z,1509056152.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:52.385Z,1509056152.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:52.766Z,1509056152.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:52.786Z,1509056152.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:53.178Z,1509056153.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:53.194Z,1509056153.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:53.559Z,1509056153.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:53.614Z,1509056153.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:53.962Z,1509056153.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:53.983Z,1509056153.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:54.350Z,1509056154.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:54.383Z,1509056154.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:54.759Z,1509056154.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:54.812Z,1509056154.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:55.162Z,1509056155.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:55.208Z,1509056155.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:55.569Z,1509056155.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:55.625Z,1509056155.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:55.965Z,1509056155.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:55.982Z,1509056155.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:56.372Z,1509056156.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:56.434Z,1509056156.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:56.762Z,1509056156.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:56.827Z,1509056156.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:57.169Z,1509056157.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:57.216Z,1509056157.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:57.571Z,1509056157.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:57.588Z,1509056157.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:57.960Z,1509056157.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:57.989Z,1509056157.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:58.361Z,1509056158.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:58.390Z,1509056158.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:58.762Z,1509056158.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:58.789Z,1509056158.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:59.180Z,1509056159.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:59.228Z,1509056159.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:59.562Z,1509056159.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:59.578Z,1509056159.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:15:59.964Z,1509056159.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:15:59.980Z,1509056159.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:00.364Z,1509056160.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:00.385Z,1509056160.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:00.762Z,1509056160.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:00.778Z,1509056160.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:01.162Z,1509056161.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:01.210Z,1509056161.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:01.747Z,1509056161.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:01.767Z,1509056161.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:02.156Z,1509056162.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:02.209Z,1509056162.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:02.555Z,1509056162.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:02.572Z,1509056162.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:03.009Z,1509056163.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:03.042Z,1509056163.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:03.341Z,1509056163.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:03.397Z,1509056163.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:03.740Z,1509056163.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:03.762Z,1509056163.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:04.172Z,1509056164.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:04.196Z,1509056164.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:04.550Z,1509056164.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:04.597Z,1509056164.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:04.995Z,1509056164.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:05.016Z,1509056165.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:05.354Z,1509056165.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:05.408Z,1509056165.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:05.755Z,1509056165.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:05.777Z,1509056165.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:06.169Z,1509056166.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:06.213Z,1509056166.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:06.529Z,1509056166.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:06.588Z,1509056166.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:06.969Z,1509056166.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:07.023Z,1509056167.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:07.349Z,1509056167.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:07.395Z,1509056167.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:07.742Z,1509056167.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:07.808Z,1509056167.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:08.163Z,1509056168.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:08.194Z,1509056168.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:08.546Z,1509056168.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:08.619Z,1509056168.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:08.972Z,1509056168.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:09.001Z,1509056169.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:09.361Z,1509056169.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:09.428Z,1509056169.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:09.737Z,1509056169.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:09.777Z,1509056169.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:10.155Z,1509056170.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:10.227Z,1509056170.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:10.541Z,1509056170.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:10.607Z,1509056170.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:10.971Z,1509056170.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:11.028Z,1509056171.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:11.343Z,1509056171.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:11.405Z,1509056171.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:11.736Z,1509056171.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:11.782Z,1509056171.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:12.154Z,1509056172.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:12.199Z,1509056172.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:12.548Z,1509056172.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:12.573Z,1509056172.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:12.963Z,1509056172.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:13.014Z,1509056173.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:13.340Z,1509056173.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:13.370Z,1509056173.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:13.752Z,1509056173.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:13.768Z,1509056173.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:14.155Z,1509056174.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:14.193Z,1509056174.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:14.530Z,1509056174.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:14.577Z,1509056174.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:14.989Z,1509056174.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:15.045Z,1509056175.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:15.340Z,1509056175.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:15.376Z,1509056175.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:15.737Z,1509056175.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:15.785Z,1509056175.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:16.164Z,1509056176.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:16.205Z,1509056176.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:16.532Z,1509056176.532 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:16.570Z,1509056176.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:16.976Z,1509056176.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:17.032Z,1509056177.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:17.334Z,1509056177.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:17.374Z,1509056177.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:17.738Z,1509056177.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:17.774Z,1509056177.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:18.164Z,1509056178.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:18.188Z,1509056178.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:18.555Z,1509056178.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:18.593Z,1509056178.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:18.995Z,1509056178.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:19.069Z,1509056179.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:19.341Z,1509056179.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:19.389Z,1509056179.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:19.739Z,1509056179.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:19.757Z,1509056179.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:20.153Z,1509056180.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:20.196Z,1509056180.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:20.553Z,1509056180.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:20.599Z,1509056180.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:20.982Z,1509056180.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:21.070Z,1509056181.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:21.338Z,1509056181.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:21.371Z,1509056181.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:21.735Z,1509056181.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:21.760Z,1509056181.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:22.108Z,1509056182.108 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:16:22.159Z,1509056182.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:22.211Z,1509056182.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:22.530Z,1509056182.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:22.627Z,1509056182.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:22.973Z,1509056182.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:23.003Z,1509056183.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:23.339Z,1509056183.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:23.375Z,1509056183.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:23.751Z,1509056183.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:23.792Z,1509056183.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:24.154Z,1509056184.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:24.195Z,1509056184.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:24.533Z,1509056184.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:24.579Z,1509056184.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:25.002Z,1509056185.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:25.026Z,1509056185.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:25.333Z,1509056185.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:25.395Z,1509056185.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:25.740Z,1509056185.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:25.749Z,1509056185.749 [BPC1](ERROR): Failed to receive battery data
2017-10-26T22:16:25.749Z,1509056185.749 [BPC1] Communications Fault, FailCount= 1
2017-10-26T22:16:25.749Z,1509056185.749 [BPC1](ERROR): Communications Fault
2017-10-26T22:16:25.778Z,1509056185.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:25.904Z,1509056185.904 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T22:16:26.167Z,1509056186.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:26.190Z,1509056186.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:26.539Z,1509056186.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:26.556Z,1509056186.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:26.971Z,1509056186.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:27.049Z,1509056187.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:27.501Z,1509056187.501 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:16:27.501Z,1509056187.501 [BPC1] No Fault, FailCount= 1
2017-10-26T22:16:27.537Z,1509056187.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:27.635Z,1509056187.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:27.939Z,1509056187.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:27.970Z,1509056187.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:28.335Z,1509056188.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:28.372Z,1509056188.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:28.744Z,1509056188.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:28.781Z,1509056188.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:29.171Z,1509056189.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:29.225Z,1509056189.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:29.539Z,1509056189.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:29.575Z,1509056189.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:29.945Z,1509056189.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:29.977Z,1509056189.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:30.346Z,1509056190.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:30.368Z,1509056190.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:30.751Z,1509056190.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:30.789Z,1509056190.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:31.176Z,1509056191.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:31.202Z,1509056191.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:31.539Z,1509056191.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:31.564Z,1509056191.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:31.944Z,1509056191.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:31.976Z,1509056191.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:32.350Z,1509056192.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:32.367Z,1509056192.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:32.761Z,1509056192.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:32.806Z,1509056192.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:33.173Z,1509056193.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:33.207Z,1509056193.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:33.541Z,1509056193.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:33.566Z,1509056193.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:33.948Z,1509056193.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:33.972Z,1509056193.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:34.347Z,1509056194.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:34.364Z,1509056194.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:34.752Z,1509056194.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:34.772Z,1509056194.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:35.163Z,1509056195.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:35.188Z,1509056195.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:35.546Z,1509056195.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:35.563Z,1509056195.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:35.942Z,1509056195.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:35.958Z,1509056195.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:36.345Z,1509056196.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:36.362Z,1509056196.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:36.754Z,1509056196.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:36.771Z,1509056196.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:37.165Z,1509056197.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:37.182Z,1509056197.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:37.544Z,1509056197.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:37.569Z,1509056197.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:37.941Z,1509056197.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:37.975Z,1509056197.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:38.343Z,1509056198.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:38.389Z,1509056198.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:38.744Z,1509056198.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:38.760Z,1509056198.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:39.164Z,1509056199.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:39.198Z,1509056199.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:39.553Z,1509056199.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:39.582Z,1509056199.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:39.949Z,1509056199.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:39.987Z,1509056199.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:40.346Z,1509056200.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:40.377Z,1509056200.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:40.746Z,1509056200.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:40.771Z,1509056200.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:41.145Z,1509056201.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:41.248Z,1509056201.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:41.551Z,1509056201.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:41.567Z,1509056201.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:41.948Z,1509056201.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:41.969Z,1509056201.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:42.337Z,1509056202.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:42.402Z,1509056202.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:42.754Z,1509056202.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:42.771Z,1509056202.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:43.178Z,1509056203.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:43.231Z,1509056203.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:43.547Z,1509056203.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:43.583Z,1509056203.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:43.947Z,1509056203.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:44.002Z,1509056204.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:44.344Z,1509056204.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:44.365Z,1509056204.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:44.747Z,1509056204.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:44.763Z,1509056204.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:45.181Z,1509056205.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:45.214Z,1509056205.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:45.552Z,1509056205.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:45.577Z,1509056205.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:45.934Z,1509056205.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:45.973Z,1509056205.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:46.347Z,1509056206.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:46.380Z,1509056206.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:46.746Z,1509056206.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:46.775Z,1509056206.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:47.173Z,1509056207.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:47.190Z,1509056207.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:47.549Z,1509056207.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:47.581Z,1509056207.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:47.944Z,1509056207.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:47.960Z,1509056207.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:48.349Z,1509056208.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:48.364Z,1509056208.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:48.749Z,1509056208.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:48.765Z,1509056208.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:49.166Z,1509056209.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:49.195Z,1509056209.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:49.541Z,1509056209.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:49.569Z,1509056209.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:49.941Z,1509056209.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:49.970Z,1509056209.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:50.342Z,1509056210.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:50.374Z,1509056210.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:50.748Z,1509056210.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:50.764Z,1509056210.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:51.164Z,1509056211.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:51.197Z,1509056211.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:51.551Z,1509056211.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:51.567Z,1509056211.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:51.956Z,1509056211.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:51.980Z,1509056211.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:52.356Z,1509056212.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:52.372Z,1509056212.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:52.756Z,1509056212.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:52.772Z,1509056212.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:53.186Z,1509056213.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:53.220Z,1509056213.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:53.546Z,1509056213.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:53.581Z,1509056213.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:53.941Z,1509056213.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:53.974Z,1509056213.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:54.340Z,1509056214.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:54.377Z,1509056214.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:54.743Z,1509056214.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:54.759Z,1509056214.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:55.186Z,1509056215.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:55.208Z,1509056215.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:55.553Z,1509056215.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:55.569Z,1509056215.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:55.951Z,1509056215.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:56.031Z,1509056216.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:56.334Z,1509056216.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:56.370Z,1509056216.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:56.747Z,1509056216.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:56.800Z,1509056216.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:57.184Z,1509056217.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:57.207Z,1509056217.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:57.557Z,1509056217.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:57.610Z,1509056217.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:57.950Z,1509056217.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:58.004Z,1509056218.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:58.354Z,1509056218.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:58.371Z,1509056218.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:58.741Z,1509056218.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:58.778Z,1509056218.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:59.170Z,1509056219.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:59.188Z,1509056219.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:59.541Z,1509056219.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:59.556Z,1509056219.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:16:59.945Z,1509056219.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:16:59.961Z,1509056219.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:00.348Z,1509056220.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:00.364Z,1509056220.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:00.746Z,1509056220.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:00.762Z,1509056220.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:01.170Z,1509056221.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:01.191Z,1509056221.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:01.540Z,1509056221.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:01.572Z,1509056221.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:01.945Z,1509056221.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:01.962Z,1509056221.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:02.350Z,1509056222.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:02.367Z,1509056222.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:02.748Z,1509056222.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:02.764Z,1509056222.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:03.141Z,1509056223.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:03.209Z,1509056223.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:03.538Z,1509056223.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:03.579Z,1509056223.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:03.935Z,1509056223.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:03.955Z,1509056223.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:04.352Z,1509056224.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:04.379Z,1509056224.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:04.748Z,1509056224.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:04.764Z,1509056224.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:05.163Z,1509056225.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:05.187Z,1509056225.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:05.540Z,1509056225.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:05.565Z,1509056225.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:05.955Z,1509056225.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:05.971Z,1509056225.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:06.342Z,1509056226.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:06.388Z,1509056226.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:06.739Z,1509056226.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:06.779Z,1509056226.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:07.169Z,1509056227.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:07.190Z,1509056227.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:07.549Z,1509056227.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:07.577Z,1509056227.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:07.947Z,1509056227.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:07.963Z,1509056227.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:08.351Z,1509056228.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:08.370Z,1509056228.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:08.753Z,1509056228.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:08.769Z,1509056228.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:09.162Z,1509056229.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:09.178Z,1509056229.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:09.550Z,1509056229.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:09.569Z,1509056229.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:10.076Z,1509056230.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:10.193Z,1509056230.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:10.492Z,1509056230.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:10.529Z,1509056230.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:10.910Z,1509056230.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:10.983Z,1509056230.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:11.290Z,1509056231.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:11.351Z,1509056231.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:11.701Z,1509056231.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:11.717Z,1509056231.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:12.091Z,1509056232.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:12.177Z,1509056232.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:12.484Z,1509056232.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:12.548Z,1509056232.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:12.913Z,1509056232.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:12.973Z,1509056232.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:13.287Z,1509056233.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:13.312Z,1509056233.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:13.693Z,1509056233.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:13.709Z,1509056233.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:14.095Z,1509056234.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:14.111Z,1509056234.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:14.511Z,1509056234.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:14.557Z,1509056234.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:14.938Z,1509056234.938 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:14.989Z,1509056234.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:15.293Z,1509056235.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:15.329Z,1509056235.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:15.698Z,1509056235.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:15.731Z,1509056235.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:16.087Z,1509056236.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:16.104Z,1509056236.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:16.486Z,1509056236.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:16.503Z,1509056236.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:16.950Z,1509056236.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:17.007Z,1509056237.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:17.287Z,1509056237.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:17.318Z,1509056237.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:17.684Z,1509056237.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:17.709Z,1509056237.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:18.097Z,1509056238.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:18.113Z,1509056238.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:18.497Z,1509056238.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:18.514Z,1509056238.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:18.886Z,1509056238.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:18.967Z,1509056238.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:19.292Z,1509056239.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:19.309Z,1509056239.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:19.695Z,1509056239.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:19.711Z,1509056239.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:20.096Z,1509056240.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:20.154Z,1509056240.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:20.498Z,1509056240.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:20.515Z,1509056240.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:20.898Z,1509056240.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:20.914Z,1509056240.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:21.295Z,1509056241.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:21.326Z,1509056241.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:21.700Z,1509056241.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:21.723Z,1509056241.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:22.079Z,1509056242.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:22.135Z,1509056242.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:22.462Z,1509056242.462 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:17:22.482Z,1509056242.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:22.522Z,1509056242.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:22.993Z,1509056242.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:23.045Z,1509056243.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:23.413Z,1509056243.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:23.433Z,1509056243.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:23.806Z,1509056243.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:23.836Z,1509056243.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:24.219Z,1509056244.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:24.237Z,1509056244.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:24.601Z,1509056244.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:24.676Z,1509056244.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:25.022Z,1509056245.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:25.108Z,1509056245.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:25.414Z,1509056245.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:25.431Z,1509056245.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:25.811Z,1509056245.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:25.836Z,1509056245.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:26.208Z,1509056246.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:26.266Z,1509056246.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:26.598Z,1509056246.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:26.637Z,1509056246.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:27.090Z,1509056247.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:27.162Z,1509056247.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:27.491Z,1509056247.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:27.537Z,1509056247.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:27.899Z,1509056247.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:27.932Z,1509056247.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:28.292Z,1509056248.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:28.313Z,1509056248.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:28.694Z,1509056248.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:28.718Z,1509056248.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:29.100Z,1509056249.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:29.151Z,1509056249.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:29.494Z,1509056249.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:29.523Z,1509056249.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:29.901Z,1509056249.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:29.917Z,1509056249.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:30.295Z,1509056250.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:30.319Z,1509056250.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:30.700Z,1509056250.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:30.717Z,1509056250.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:31.090Z,1509056251.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:31.159Z,1509056251.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:31.497Z,1509056251.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:31.525Z,1509056251.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:31.901Z,1509056251.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:31.933Z,1509056251.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:32.298Z,1509056252.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:32.327Z,1509056252.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:32.695Z,1509056252.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:32.724Z,1509056252.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:33.094Z,1509056253.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:33.151Z,1509056253.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:33.502Z,1509056253.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:33.519Z,1509056253.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:33.893Z,1509056253.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:33.951Z,1509056253.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:34.290Z,1509056254.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:34.329Z,1509056254.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:34.694Z,1509056254.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:34.727Z,1509056254.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:35.091Z,1509056255.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:35.156Z,1509056255.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:35.497Z,1509056255.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:35.513Z,1509056255.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:35.912Z,1509056255.912 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:35.954Z,1509056255.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:36.306Z,1509056256.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:36.323Z,1509056256.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:36.702Z,1509056256.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:36.718Z,1509056256.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:37.108Z,1509056257.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:37.158Z,1509056257.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:37.491Z,1509056257.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:37.519Z,1509056257.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:37.898Z,1509056257.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:37.929Z,1509056257.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:38.297Z,1509056258.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:38.322Z,1509056258.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:38.698Z,1509056258.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:38.714Z,1509056258.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:39.107Z,1509056259.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:39.194Z,1509056259.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:39.503Z,1509056259.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:39.519Z,1509056259.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:39.894Z,1509056259.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:39.948Z,1509056259.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:40.289Z,1509056260.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:40.313Z,1509056260.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:40.689Z,1509056260.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:40.705Z,1509056260.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:41.099Z,1509056261.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:41.172Z,1509056261.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:41.491Z,1509056261.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:41.509Z,1509056261.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:41.894Z,1509056261.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:41.939Z,1509056261.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:42.305Z,1509056262.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:42.348Z,1509056262.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:42.700Z,1509056262.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:42.737Z,1509056262.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:43.107Z,1509056263.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:43.159Z,1509056263.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:43.500Z,1509056263.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:43.526Z,1509056263.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:43.900Z,1509056263.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:43.932Z,1509056263.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:44.301Z,1509056264.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:44.334Z,1509056264.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:44.697Z,1509056264.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:44.713Z,1509056264.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:45.106Z,1509056265.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:45.154Z,1509056265.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:45.498Z,1509056265.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:45.514Z,1509056265.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:45.893Z,1509056265.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:45.909Z,1509056265.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:46.300Z,1509056266.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:46.328Z,1509056266.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:46.692Z,1509056266.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:46.712Z,1509056266.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:47.105Z,1509056267.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:47.169Z,1509056267.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:47.492Z,1509056267.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:47.524Z,1509056267.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:47.895Z,1509056267.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:47.930Z,1509056267.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:48.295Z,1509056268.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:48.331Z,1509056268.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:48.693Z,1509056268.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:48.709Z,1509056268.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:49.093Z,1509056269.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:49.156Z,1509056269.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:49.498Z,1509056269.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:49.527Z,1509056269.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:49.892Z,1509056269.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:49.928Z,1509056269.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:50.296Z,1509056270.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:50.333Z,1509056270.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:50.691Z,1509056270.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:50.707Z,1509056270.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:51.093Z,1509056271.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:51.110Z,1509056271.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:51.503Z,1509056271.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:51.520Z,1509056271.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:51.903Z,1509056271.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:51.919Z,1509056271.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:52.307Z,1509056272.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:52.324Z,1509056272.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:52.702Z,1509056272.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:52.718Z,1509056272.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:53.087Z,1509056273.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:53.114Z,1509056273.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:53.489Z,1509056273.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:53.548Z,1509056273.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:53.892Z,1509056273.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:53.943Z,1509056273.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:54.300Z,1509056274.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:54.358Z,1509056274.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:54.691Z,1509056274.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:54.708Z,1509056274.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:55.107Z,1509056275.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:55.156Z,1509056275.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:55.506Z,1509056275.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:55.523Z,1509056275.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:55.900Z,1509056275.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:55.945Z,1509056275.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:56.309Z,1509056276.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:56.365Z,1509056276.365 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:56.365Z,1509056276.365 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 50
2017-10-26T22:17:56.365Z,1509056276.365 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:17:56.369Z,1509056276.369 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:56.369Z,1509056276.369 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 50
2017-10-26T22:17:56.370Z,1509056276.370 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:17:56.467Z,1509056276.467 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:17:56.468Z,1509056276.468 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:17:56.702Z,1509056276.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:56.823Z,1509056276.823 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:17:56.824Z,1509056276.824 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 50
2017-10-26T22:17:56.824Z,1509056276.824 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:17:56.824Z,1509056276.824 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 50
2017-10-26T22:17:57.105Z,1509056277.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:57.142Z,1509056277.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:17:57.146Z,1509056277.146 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:17:57.146Z,1509056277.146 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:17:57.165Z,1509056277.165 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:17:57.165Z,1509056277.165 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:17:57.166Z,1509056277.165 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:17:57.494Z,1509056277.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:57.527Z,1509056277.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:57.892Z,1509056277.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:57.933Z,1509056277.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:58.296Z,1509056278.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:58.334Z,1509056278.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:58.700Z,1509056278.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:58.733Z,1509056278.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:59.093Z,1509056279.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:59.148Z,1509056279.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:59.502Z,1509056279.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:59.519Z,1509056279.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:17:59.906Z,1509056279.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:17:59.923Z,1509056279.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:00.309Z,1509056280.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:00.331Z,1509056280.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:00.691Z,1509056280.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:00.731Z,1509056280.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:01.092Z,1509056281.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:01.158Z,1509056281.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:01.500Z,1509056281.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:01.560Z,1509056281.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:01.893Z,1509056281.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:01.913Z,1509056281.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:02.299Z,1509056282.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:02.315Z,1509056282.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:02.702Z,1509056282.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:02.723Z,1509056282.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:03.095Z,1509056283.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:03.135Z,1509056283.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:03.505Z,1509056283.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:03.522Z,1509056283.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:03.887Z,1509056283.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:03.927Z,1509056283.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:04.305Z,1509056284.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:04.322Z,1509056284.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:04.689Z,1509056284.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:04.726Z,1509056284.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:05.089Z,1509056285.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:05.154Z,1509056285.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:05.508Z,1509056285.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:05.525Z,1509056285.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:05.887Z,1509056285.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:05.920Z,1509056285.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:06.293Z,1509056286.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:06.334Z,1509056286.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:06.695Z,1509056286.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:06.724Z,1509056286.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:07.105Z,1509056287.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:07.192Z,1509056287.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:07.503Z,1509056287.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:07.537Z,1509056287.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:07.900Z,1509056287.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:07.916Z,1509056287.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:08.301Z,1509056288.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:08.355Z,1509056288.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:08.701Z,1509056288.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:08.718Z,1509056288.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:09.113Z,1509056289.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:09.161Z,1509056289.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:09.513Z,1509056289.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:09.573Z,1509056289.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:09.897Z,1509056289.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:09.927Z,1509056289.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:10.294Z,1509056290.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:10.350Z,1509056290.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:10.694Z,1509056290.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:10.768Z,1509056290.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:11.092Z,1509056291.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:11.148Z,1509056291.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:11.493Z,1509056291.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:11.522Z,1509056291.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:11.899Z,1509056291.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:11.927Z,1509056291.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:12.297Z,1509056292.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:12.313Z,1509056292.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:12.701Z,1509056292.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:12.717Z,1509056292.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:13.120Z,1509056293.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:13.164Z,1509056293.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:13.504Z,1509056293.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:13.521Z,1509056293.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:13.890Z,1509056293.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:13.915Z,1509056293.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:14.310Z,1509056294.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:14.326Z,1509056294.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:14.702Z,1509056294.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:14.718Z,1509056294.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:15.091Z,1509056295.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:15.167Z,1509056295.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:15.490Z,1509056295.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:15.519Z,1509056295.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:15.894Z,1509056295.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:15.924Z,1509056295.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:16.295Z,1509056296.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:16.323Z,1509056296.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:16.702Z,1509056296.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:16.726Z,1509056296.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:17.094Z,1509056297.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:17.146Z,1509056297.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:17.501Z,1509056297.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:17.517Z,1509056297.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:17.897Z,1509056297.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:17.913Z,1509056297.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:18.298Z,1509056298.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:18.314Z,1509056298.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:18.709Z,1509056298.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:18.758Z,1509056298.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:19.102Z,1509056299.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:19.136Z,1509056299.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:19.501Z,1509056299.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:19.518Z,1509056299.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:19.915Z,1509056299.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:19.938Z,1509056299.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:20.293Z,1509056300.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:20.326Z,1509056300.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:20.698Z,1509056300.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:20.737Z,1509056300.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:21.101Z,1509056301.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:21.163Z,1509056301.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:21.498Z,1509056301.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:21.514Z,1509056301.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:21.899Z,1509056301.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:21.929Z,1509056301.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:22.296Z,1509056302.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:22.324Z,1509056302.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:22.687Z,1509056302.687 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:18:22.721Z,1509056302.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:22.792Z,1509056302.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:23.092Z,1509056303.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:23.152Z,1509056303.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:23.494Z,1509056303.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:23.523Z,1509056303.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:23.890Z,1509056303.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:23.947Z,1509056303.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:24.289Z,1509056304.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:24.321Z,1509056304.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:24.692Z,1509056304.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:24.744Z,1509056304.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:25.098Z,1509056305.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:25.154Z,1509056305.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:25.510Z,1509056305.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:25.541Z,1509056305.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:25.904Z,1509056305.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:25.920Z,1509056305.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:26.303Z,1509056306.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:26.324Z,1509056306.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:26.691Z,1509056306.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:26.733Z,1509056306.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:27.093Z,1509056307.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:27.152Z,1509056307.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:27.517Z,1509056307.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:27.538Z,1509056307.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:27.894Z,1509056307.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:27.930Z,1509056307.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:28.297Z,1509056308.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:28.338Z,1509056308.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:28.702Z,1509056308.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:28.718Z,1509056308.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:29.102Z,1509056309.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:29.148Z,1509056309.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:29.496Z,1509056309.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:29.512Z,1509056309.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:29.895Z,1509056309.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:29.924Z,1509056309.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:30.306Z,1509056310.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:30.322Z,1509056310.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:30.701Z,1509056310.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:30.717Z,1509056310.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:31.112Z,1509056311.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:31.166Z,1509056311.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:31.505Z,1509056311.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:31.534Z,1509056311.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:31.895Z,1509056311.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:31.937Z,1509056311.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:32.305Z,1509056312.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:32.334Z,1509056312.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:32.693Z,1509056312.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:32.725Z,1509056312.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:33.107Z,1509056313.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:33.154Z,1509056313.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:33.494Z,1509056313.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:33.526Z,1509056313.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:33.904Z,1509056313.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:33.920Z,1509056313.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:34.287Z,1509056314.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:34.326Z,1509056314.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:34.695Z,1509056314.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:34.725Z,1509056314.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:35.088Z,1509056315.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:35.163Z,1509056315.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:35.497Z,1509056315.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:35.535Z,1509056315.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:35.897Z,1509056315.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:35.965Z,1509056315.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:36.290Z,1509056316.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:36.306Z,1509056316.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:36.691Z,1509056316.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:36.708Z,1509056316.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:37.120Z,1509056317.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:37.197Z,1509056317.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:37.505Z,1509056317.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:37.529Z,1509056317.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:37.910Z,1509056317.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:37.930Z,1509056317.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:38.307Z,1509056318.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:38.364Z,1509056318.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:38.699Z,1509056318.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:38.736Z,1509056318.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:39.109Z,1509056319.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:39.191Z,1509056319.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:39.508Z,1509056319.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:39.571Z,1509056319.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:39.894Z,1509056319.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:39.927Z,1509056319.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:40.303Z,1509056320.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:40.319Z,1509056320.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:40.706Z,1509056320.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:40.723Z,1509056320.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:41.110Z,1509056321.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:41.164Z,1509056321.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:41.509Z,1509056321.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:41.526Z,1509056321.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:41.890Z,1509056321.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:41.927Z,1509056321.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:42.295Z,1509056322.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:42.323Z,1509056322.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:42.696Z,1509056322.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:42.720Z,1509056322.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:43.099Z,1509056323.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:43.160Z,1509056323.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:43.500Z,1509056323.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:43.516Z,1509056323.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:43.899Z,1509056323.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:43.916Z,1509056323.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:44.301Z,1509056324.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:44.323Z,1509056324.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:44.699Z,1509056324.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:44.716Z,1509056324.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:45.099Z,1509056325.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:45.162Z,1509056325.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:45.492Z,1509056325.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:45.526Z,1509056325.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:45.910Z,1509056325.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:45.930Z,1509056325.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:46.293Z,1509056326.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:46.322Z,1509056326.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:46.696Z,1509056326.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:46.728Z,1509056326.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:47.095Z,1509056327.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:47.150Z,1509056327.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:47.496Z,1509056327.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:47.538Z,1509056327.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:47.890Z,1509056327.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:47.906Z,1509056327.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:48.295Z,1509056328.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:48.312Z,1509056328.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:48.697Z,1509056328.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:48.718Z,1509056328.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:49.099Z,1509056329.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:49.128Z,1509056329.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:49.508Z,1509056329.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:49.525Z,1509056329.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:49.900Z,1509056329.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:49.916Z,1509056329.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:50.330Z,1509056330.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:50.385Z,1509056330.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:50.690Z,1509056330.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:50.723Z,1509056330.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:51.093Z,1509056331.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:51.149Z,1509056331.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:51.498Z,1509056331.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:51.522Z,1509056331.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:51.902Z,1509056331.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:51.970Z,1509056331.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:52.300Z,1509056332.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:52.329Z,1509056332.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:52.698Z,1509056332.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:52.730Z,1509056332.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:53.088Z,1509056333.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:53.155Z,1509056333.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:53.491Z,1509056333.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:53.523Z,1509056333.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:53.897Z,1509056333.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:53.950Z,1509056333.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:54.298Z,1509056334.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:54.343Z,1509056334.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:54.702Z,1509056334.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:54.730Z,1509056334.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:55.101Z,1509056335.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:55.151Z,1509056335.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:55.488Z,1509056335.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:55.523Z,1509056335.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:55.888Z,1509056335.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:55.931Z,1509056335.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:56.296Z,1509056336.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:56.332Z,1509056336.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:56.691Z,1509056336.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:56.732Z,1509056336.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:57.094Z,1509056337.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:57.150Z,1509056337.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:57.499Z,1509056337.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:57.535Z,1509056337.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:57.900Z,1509056337.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:57.917Z,1509056337.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:58.293Z,1509056338.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:58.317Z,1509056338.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:58.699Z,1509056338.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:58.716Z,1509056338.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:59.097Z,1509056339.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:59.114Z,1509056339.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:59.500Z,1509056339.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:59.532Z,1509056339.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:18:59.901Z,1509056339.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:18:59.918Z,1509056339.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:00.303Z,1509056340.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:00.324Z,1509056340.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:00.688Z,1509056340.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:00.725Z,1509056340.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:01.088Z,1509056341.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:01.158Z,1509056341.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:01.489Z,1509056341.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:01.528Z,1509056341.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:01.898Z,1509056341.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:01.930Z,1509056341.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:02.302Z,1509056342.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:02.339Z,1509056342.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:02.698Z,1509056342.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:02.737Z,1509056342.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:03.100Z,1509056343.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:03.146Z,1509056343.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:03.509Z,1509056343.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:03.526Z,1509056343.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:03.905Z,1509056343.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:03.922Z,1509056343.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:04.305Z,1509056344.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:04.322Z,1509056344.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:04.705Z,1509056344.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:04.726Z,1509056344.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:05.090Z,1509056345.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:05.176Z,1509056345.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:05.693Z,1509056345.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:05.719Z,1509056345.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:06.100Z,1509056346.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:06.156Z,1509056346.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:06.494Z,1509056346.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:06.600Z,1509056346.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:06.900Z,1509056346.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:07.009Z,1509056347.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:07.299Z,1509056347.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:07.354Z,1509056347.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:07.701Z,1509056347.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:07.717Z,1509056347.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:08.098Z,1509056348.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:08.158Z,1509056348.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:08.504Z,1509056348.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:08.562Z,1509056348.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:08.923Z,1509056348.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:09.006Z,1509056349.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:09.293Z,1509056349.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:09.323Z,1509056349.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:09.698Z,1509056349.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:09.730Z,1509056349.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:10.093Z,1509056350.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:10.149Z,1509056350.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:10.499Z,1509056350.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:10.515Z,1509056350.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:10.899Z,1509056350.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:10.997Z,1509056350.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:11.292Z,1509056351.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:11.321Z,1509056351.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:11.714Z,1509056351.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:11.756Z,1509056351.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:12.093Z,1509056352.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:12.110Z,1509056352.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:12.498Z,1509056352.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:12.515Z,1509056352.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:12.896Z,1509056352.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:13.002Z,1509056353.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:13.294Z,1509056353.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:13.310Z,1509056353.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:13.706Z,1509056353.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:13.733Z,1509056353.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:14.101Z,1509056354.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:14.151Z,1509056354.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:14.500Z,1509056354.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:14.516Z,1509056354.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:14.907Z,1509056354.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:15.010Z,1509056355.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:15.291Z,1509056355.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:15.323Z,1509056355.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:15.695Z,1509056355.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:15.742Z,1509056355.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:16.094Z,1509056356.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:16.147Z,1509056356.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:16.501Z,1509056356.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:16.517Z,1509056356.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:17.065Z,1509056357.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:17.160Z,1509056357.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:17.434Z,1509056357.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:17.466Z,1509056357.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:17.821Z,1509056357.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:17.837Z,1509056357.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:18.217Z,1509056358.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:18.234Z,1509056358.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:18.621Z,1509056358.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:18.638Z,1509056358.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:19.026Z,1509056359.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:19.042Z,1509056359.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:19.421Z,1509056359.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:19.478Z,1509056359.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:19.833Z,1509056359.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:19.853Z,1509056359.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:20.218Z,1509056360.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:20.271Z,1509056360.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:20.621Z,1509056360.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:20.649Z,1509056360.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:21.023Z,1509056361.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:21.097Z,1509056361.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:21.424Z,1509056361.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:21.455Z,1509056361.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:21.821Z,1509056361.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:21.877Z,1509056361.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:22.218Z,1509056362.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:22.270Z,1509056362.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:22.623Z,1509056362.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:22.639Z,1509056362.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:23.031Z,1509056363.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:23.079Z,1509056363.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:23.390Z,1509056363.390 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:19:23.429Z,1509056363.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:23.445Z,1509056363.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:23.840Z,1509056363.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:23.862Z,1509056363.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:24.231Z,1509056364.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:24.252Z,1509056364.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:24.617Z,1509056364.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:24.648Z,1509056364.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:25.026Z,1509056365.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:25.052Z,1509056365.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:25.419Z,1509056365.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:25.448Z,1509056365.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:25.820Z,1509056365.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:25.836Z,1509056365.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:26.224Z,1509056366.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:26.252Z,1509056366.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:26.608Z,1509056366.608 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:26.636Z,1509056366.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:27.013Z,1509056367.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:27.054Z,1509056367.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:27.421Z,1509056367.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:27.454Z,1509056367.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:27.816Z,1509056367.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:27.849Z,1509056367.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:28.220Z,1509056368.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:28.249Z,1509056368.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:28.634Z,1509056368.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:28.686Z,1509056368.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:29.032Z,1509056369.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:29.062Z,1509056369.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:29.417Z,1509056369.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:29.440Z,1509056369.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:29.819Z,1509056369.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:29.844Z,1509056369.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:30.230Z,1509056370.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:30.247Z,1509056370.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:30.633Z,1509056370.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:30.649Z,1509056370.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:31.039Z,1509056371.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:31.066Z,1509056371.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:31.420Z,1509056371.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:31.444Z,1509056371.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:31.829Z,1509056371.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:31.845Z,1509056371.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:32.226Z,1509056372.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:32.243Z,1509056372.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:32.614Z,1509056372.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:32.639Z,1509056372.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:33.040Z,1509056373.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:33.106Z,1509056373.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:33.426Z,1509056373.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:33.443Z,1509056373.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:33.829Z,1509056373.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:33.845Z,1509056373.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:34.223Z,1509056374.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:34.241Z,1509056374.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:34.612Z,1509056374.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:34.669Z,1509056374.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:35.027Z,1509056375.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:35.050Z,1509056375.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:35.434Z,1509056375.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:35.455Z,1509056375.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:35.824Z,1509056375.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:35.879Z,1509056375.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:36.378Z,1509056376.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:36.408Z,1509056376.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:36.781Z,1509056376.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:36.825Z,1509056376.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:37.174Z,1509056377.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:37.223Z,1509056377.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:37.586Z,1509056377.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:37.602Z,1509056377.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:37.990Z,1509056377.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:38.006Z,1509056378.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:38.380Z,1509056378.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:38.405Z,1509056378.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:38.773Z,1509056378.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:38.820Z,1509056378.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:39.196Z,1509056379.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:39.246Z,1509056379.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:39.589Z,1509056379.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:39.605Z,1509056379.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:39.993Z,1509056379.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:40.010Z,1509056380.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:40.373Z,1509056380.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:40.410Z,1509056380.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:40.778Z,1509056380.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:40.814Z,1509056380.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:41.179Z,1509056381.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:41.219Z,1509056381.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:41.589Z,1509056381.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:41.605Z,1509056381.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:41.988Z,1509056381.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:42.005Z,1509056382.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:42.391Z,1509056382.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:42.408Z,1509056382.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:42.773Z,1509056382.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:42.801Z,1509056382.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:43.180Z,1509056383.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:43.213Z,1509056383.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:43.578Z,1509056383.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:43.611Z,1509056383.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:43.983Z,1509056383.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:44.016Z,1509056384.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:44.383Z,1509056384.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:44.399Z,1509056384.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:44.780Z,1509056384.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:44.801Z,1509056384.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:45.196Z,1509056385.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:45.218Z,1509056385.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:45.585Z,1509056385.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:45.610Z,1509056385.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:45.992Z,1509056385.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:46.008Z,1509056386.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:46.383Z,1509056386.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:46.414Z,1509056386.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:46.792Z,1509056386.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:46.821Z,1509056386.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:47.195Z,1509056387.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:47.237Z,1509056387.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:47.591Z,1509056387.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:47.607Z,1509056387.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:47.990Z,1509056387.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:48.053Z,1509056388.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:48.393Z,1509056388.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:48.409Z,1509056388.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:48.778Z,1509056388.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:48.813Z,1509056388.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:49.184Z,1509056389.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:49.254Z,1509056389.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:49.583Z,1509056389.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:49.611Z,1509056389.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:49.977Z,1509056389.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:50.033Z,1509056390.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:50.383Z,1509056390.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:50.415Z,1509056390.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:50.786Z,1509056390.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:50.841Z,1509056390.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:51.196Z,1509056391.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:51.273Z,1509056391.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:51.586Z,1509056391.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:51.602Z,1509056391.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:51.982Z,1509056391.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:51.999Z,1509056391.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:52.400Z,1509056392.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:52.421Z,1509056392.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:52.784Z,1509056392.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:52.809Z,1509056392.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:53.197Z,1509056393.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:53.221Z,1509056393.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:53.578Z,1509056393.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:53.607Z,1509056393.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:53.985Z,1509056393.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:54.002Z,1509056394.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:54.395Z,1509056394.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:54.414Z,1509056394.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:54.787Z,1509056394.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:54.803Z,1509056394.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:55.197Z,1509056395.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:55.213Z,1509056395.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:55.581Z,1509056395.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:55.611Z,1509056395.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:55.979Z,1509056395.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:56.008Z,1509056396.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:56.386Z,1509056396.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:56.407Z,1509056396.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:56.787Z,1509056396.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:56.805Z,1509056396.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:57.188Z,1509056397.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:57.205Z,1509056397.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:57.572Z,1509056397.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:57.606Z,1509056397.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:57.977Z,1509056397.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:58.007Z,1509056398.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:58.380Z,1509056398.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:58.429Z,1509056398.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:58.775Z,1509056398.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:58.820Z,1509056398.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:59.180Z,1509056399.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:59.217Z,1509056399.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:59.578Z,1509056399.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:59.595Z,1509056399.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:19:59.983Z,1509056399.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:19:59.999Z,1509056399.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:00.374Z,1509056400.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:00.407Z,1509056400.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:00.777Z,1509056400.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:00.806Z,1509056400.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:01.193Z,1509056401.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:01.293Z,1509056401.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:01.832Z,1509056401.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:01.866Z,1509056401.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:02.249Z,1509056402.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:02.308Z,1509056402.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:02.640Z,1509056402.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:02.669Z,1509056402.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:03.034Z,1509056403.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:03.067Z,1509056403.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:03.437Z,1509056403.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:03.494Z,1509056403.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:03.848Z,1509056403.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:03.864Z,1509056403.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:04.234Z,1509056404.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:04.267Z,1509056404.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:04.639Z,1509056404.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:04.714Z,1509056404.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:05.039Z,1509056405.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:05.068Z,1509056405.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:05.440Z,1509056405.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:05.496Z,1509056405.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:05.856Z,1509056405.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:05.899Z,1509056405.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:06.248Z,1509056406.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:06.264Z,1509056406.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:06.654Z,1509056406.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:06.670Z,1509056406.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:07.063Z,1509056407.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:07.079Z,1509056407.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:07.437Z,1509056407.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:07.466Z,1509056407.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:07.844Z,1509056407.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:07.879Z,1509056407.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:08.242Z,1509056408.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:08.270Z,1509056408.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:08.649Z,1509056408.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:08.670Z,1509056408.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:09.041Z,1509056409.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:09.056Z,1509056409.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:09.429Z,1509056409.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:09.453Z,1509056409.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:09.835Z,1509056409.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:09.864Z,1509056409.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:10.253Z,1509056410.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:10.269Z,1509056410.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:10.637Z,1509056410.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:10.679Z,1509056410.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:11.034Z,1509056411.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:11.077Z,1509056411.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:11.433Z,1509056411.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:11.450Z,1509056411.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:11.837Z,1509056411.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:11.854Z,1509056411.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:12.239Z,1509056412.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:12.264Z,1509056412.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:12.647Z,1509056412.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:12.701Z,1509056412.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:13.075Z,1509056413.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:13.108Z,1509056413.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:13.437Z,1509056413.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:13.474Z,1509056413.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:13.841Z,1509056413.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:13.857Z,1509056413.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:14.238Z,1509056414.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:14.255Z,1509056414.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:14.643Z,1509056414.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:14.659Z,1509056414.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:15.031Z,1509056415.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:15.064Z,1509056415.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:15.448Z,1509056415.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:15.464Z,1509056415.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:15.850Z,1509056415.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:15.866Z,1509056415.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:16.233Z,1509056416.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:16.269Z,1509056416.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:16.646Z,1509056416.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:16.674Z,1509056416.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:17.050Z,1509056417.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:17.147Z,1509056417.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:17.441Z,1509056417.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:17.458Z,1509056417.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:17.846Z,1509056417.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:17.900Z,1509056417.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:18.236Z,1509056418.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:18.288Z,1509056418.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:18.638Z,1509056418.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:18.677Z,1509056418.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:19.045Z,1509056419.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:19.098Z,1509056419.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:19.436Z,1509056419.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:19.465Z,1509056419.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:19.846Z,1509056419.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:19.903Z,1509056419.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:20.243Z,1509056420.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:20.302Z,1509056420.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:20.635Z,1509056420.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:20.664Z,1509056420.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:21.032Z,1509056421.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:21.061Z,1509056421.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:21.439Z,1509056421.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:21.467Z,1509056421.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:21.838Z,1509056421.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:21.870Z,1509056421.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:22.238Z,1509056422.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:22.263Z,1509056422.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:22.639Z,1509056422.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:22.671Z,1509056422.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:23.047Z,1509056423.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:23.081Z,1509056423.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:23.419Z,1509056423.419 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:20:23.445Z,1509056423.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:23.482Z,1509056423.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:23.843Z,1509056423.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:23.859Z,1509056423.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:24.251Z,1509056424.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:24.268Z,1509056424.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:24.642Z,1509056424.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:24.658Z,1509056424.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:25.055Z,1509056425.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:25.092Z,1509056425.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:25.439Z,1509056425.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:25.468Z,1509056425.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:25.834Z,1509056425.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:25.874Z,1509056425.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:26.244Z,1509056426.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:26.274Z,1509056426.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:26.641Z,1509056426.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:26.673Z,1509056426.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:27.184Z,1509056427.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:27.200Z,1509056427.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:27.584Z,1509056427.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:27.601Z,1509056427.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:27.986Z,1509056427.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:28.025Z,1509056428.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:28.384Z,1509056428.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:28.424Z,1509056428.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:28.777Z,1509056428.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:28.805Z,1509056428.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:29.174Z,1509056429.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:29.239Z,1509056429.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:29.581Z,1509056429.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:29.611Z,1509056429.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:29.983Z,1509056429.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:29.999Z,1509056429.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:30.385Z,1509056430.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:30.425Z,1509056430.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:30.777Z,1509056430.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:30.806Z,1509056430.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:31.177Z,1509056431.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:31.214Z,1509056431.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:31.644Z,1509056431.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:31.684Z,1509056431.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:31.992Z,1509056431.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:32.009Z,1509056432.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:32.381Z,1509056432.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:32.466Z,1509056432.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:32.784Z,1509056432.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:32.856Z,1509056432.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:33.187Z,1509056433.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:33.203Z,1509056433.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:33.631Z,1509056433.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:33.727Z,1509056433.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:33.972Z,1509056433.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:34.000Z,1509056434.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:34.396Z,1509056434.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:34.453Z,1509056434.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:34.790Z,1509056434.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:34.859Z,1509056434.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:35.200Z,1509056435.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:35.225Z,1509056435.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:35.589Z,1509056435.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:35.606Z,1509056435.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:36.106Z,1509056436.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:36.175Z,1509056436.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:36.502Z,1509056436.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:36.536Z,1509056436.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:36.916Z,1509056436.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:37.006Z,1509056437.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:37.297Z,1509056437.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:37.345Z,1509056437.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:37.705Z,1509056437.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:37.741Z,1509056437.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:38.102Z,1509056438.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:38.163Z,1509056438.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:38.505Z,1509056438.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:38.523Z,1509056438.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:38.897Z,1509056438.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:38.981Z,1509056438.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:39.298Z,1509056439.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:39.314Z,1509056439.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:39.702Z,1509056439.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:39.738Z,1509056439.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:40.104Z,1509056440.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:40.161Z,1509056440.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:40.509Z,1509056440.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:40.526Z,1509056440.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:40.898Z,1509056440.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:40.926Z,1509056440.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:41.310Z,1509056441.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:41.326Z,1509056441.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:41.712Z,1509056441.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:41.733Z,1509056441.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:42.096Z,1509056442.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:42.161Z,1509056442.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:42.498Z,1509056442.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:42.531Z,1509056442.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:42.907Z,1509056442.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:42.923Z,1509056442.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:43.326Z,1509056443.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:43.382Z,1509056443.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:43.699Z,1509056443.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:43.735Z,1509056443.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:44.103Z,1509056444.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:44.154Z,1509056444.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:44.533Z,1509056444.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:44.569Z,1509056444.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:44.913Z,1509056444.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:44.942Z,1509056444.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:45.327Z,1509056445.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:45.344Z,1509056445.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:45.727Z,1509056445.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:45.743Z,1509056445.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:46.102Z,1509056446.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:46.160Z,1509056446.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:46.509Z,1509056446.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:46.578Z,1509056446.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:46.905Z,1509056446.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:46.922Z,1509056446.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:47.317Z,1509056447.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:47.378Z,1509056447.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:47.717Z,1509056447.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:47.747Z,1509056447.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:48.113Z,1509056448.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:48.191Z,1509056448.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:48.536Z,1509056448.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:48.578Z,1509056448.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:48.894Z,1509056448.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:49.003Z,1509056449.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:49.309Z,1509056449.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:49.385Z,1509056449.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:49.716Z,1509056449.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:49.747Z,1509056449.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:50.153Z,1509056450.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:50.191Z,1509056450.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:50.752Z,1509056450.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:50.789Z,1509056450.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:51.171Z,1509056451.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:51.200Z,1509056451.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:51.558Z,1509056451.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:51.575Z,1509056451.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:51.958Z,1509056451.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:51.974Z,1509056451.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:52.360Z,1509056452.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:52.382Z,1509056452.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:52.760Z,1509056452.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:52.776Z,1509056452.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:53.151Z,1509056453.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:53.190Z,1509056453.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:53.551Z,1509056453.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:53.581Z,1509056453.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:53.947Z,1509056453.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:53.981Z,1509056453.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:54.362Z,1509056454.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:54.394Z,1509056454.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:54.756Z,1509056454.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:54.772Z,1509056454.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:55.167Z,1509056455.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:55.202Z,1509056455.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:55.561Z,1509056455.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:55.577Z,1509056455.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:55.956Z,1509056455.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:55.973Z,1509056455.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:56.360Z,1509056456.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:56.376Z,1509056456.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:56.763Z,1509056456.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:56.780Z,1509056456.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:57.177Z,1509056457.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:57.196Z,1509056457.196 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:57.196Z,1509056457.196 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 51
2017-10-26T22:20:57.196Z,1509056457.196 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:20:57.243Z,1509056457.243 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:57.243Z,1509056457.243 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 51
2017-10-26T22:20:57.244Z,1509056457.244 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:20:57.349Z,1509056457.349 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:20:57.349Z,1509056457.349 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:20:57.558Z,1509056457.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:57.630Z,1509056457.630 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:20:57.630Z,1509056457.630 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 51
2017-10-26T22:20:57.630Z,1509056457.630 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:20:57.630Z,1509056457.630 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 51
2017-10-26T22:20:57.958Z,1509056457.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:57.988Z,1509056457.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:20:57.988Z,1509056457.988 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:20:57.988Z,1509056457.988 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:20:57.991Z,1509056457.991 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:20:57.992Z,1509056457.992 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:20:57.992Z,1509056457.992 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:20:58.358Z,1509056458.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:58.395Z,1509056458.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:58.758Z,1509056458.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:58.790Z,1509056458.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:59.164Z,1509056459.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:59.205Z,1509056459.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:59.575Z,1509056459.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:20:59.652Z,1509056459.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:20:59.974Z,1509056459.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:00.000Z,1509056460.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:00.349Z,1509056460.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:00.373Z,1509056460.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:00.760Z,1509056460.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:00.777Z,1509056460.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:01.171Z,1509056461.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:01.235Z,1509056461.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:01.551Z,1509056461.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:01.708Z,1509056461.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:01.960Z,1509056461.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:01.975Z,1509056461.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:02.358Z,1509056462.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:02.374Z,1509056462.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:02.760Z,1509056462.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:02.814Z,1509056462.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:03.158Z,1509056463.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:03.179Z,1509056463.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:03.563Z,1509056463.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:03.625Z,1509056463.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:03.951Z,1509056463.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:04.015Z,1509056464.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:04.351Z,1509056464.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:04.388Z,1509056464.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:04.748Z,1509056464.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:04.785Z,1509056464.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:05.153Z,1509056465.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:05.198Z,1509056465.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:05.557Z,1509056465.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:05.597Z,1509056465.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:05.953Z,1509056465.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:05.985Z,1509056465.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:06.345Z,1509056466.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:06.361Z,1509056466.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:06.766Z,1509056466.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:06.810Z,1509056466.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:07.169Z,1509056467.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:07.185Z,1509056467.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:07.566Z,1509056467.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:07.582Z,1509056467.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:07.961Z,1509056467.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:07.982Z,1509056467.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:08.346Z,1509056468.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:08.383Z,1509056468.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:08.754Z,1509056468.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:08.787Z,1509056468.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:09.159Z,1509056469.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:09.188Z,1509056469.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:09.554Z,1509056469.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:09.583Z,1509056469.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:09.952Z,1509056469.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:09.981Z,1509056469.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:10.353Z,1509056470.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:10.390Z,1509056470.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:10.767Z,1509056470.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:10.789Z,1509056470.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:11.169Z,1509056471.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:11.186Z,1509056471.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:11.547Z,1509056471.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:11.586Z,1509056471.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:11.950Z,1509056471.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:11.982Z,1509056471.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:12.376Z,1509056472.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:12.394Z,1509056472.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:12.758Z,1509056472.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:12.798Z,1509056472.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:13.161Z,1509056473.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:13.193Z,1509056473.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:13.559Z,1509056473.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:13.595Z,1509056473.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:13.956Z,1509056473.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:13.977Z,1509056473.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:14.467Z,1509056474.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:14.484Z,1509056474.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:14.907Z,1509056474.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:15.002Z,1509056475.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:15.273Z,1509056475.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:15.292Z,1509056475.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:15.675Z,1509056475.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:15.693Z,1509056475.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:16.086Z,1509056476.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:16.184Z,1509056476.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:16.460Z,1509056476.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:16.496Z,1509056476.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:16.922Z,1509056476.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:16.998Z,1509056476.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:17.271Z,1509056477.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:17.319Z,1509056477.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:17.672Z,1509056477.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:17.721Z,1509056477.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:18.084Z,1509056478.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:18.157Z,1509056478.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:18.468Z,1509056478.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:18.539Z,1509056478.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:18.864Z,1509056478.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:18.959Z,1509056478.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:19.270Z,1509056479.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:19.302Z,1509056479.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:19.673Z,1509056479.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:19.692Z,1509056479.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:20.083Z,1509056480.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:20.102Z,1509056480.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:20.469Z,1509056480.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:20.486Z,1509056480.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:20.868Z,1509056480.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:20.999Z,1509056480.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:21.279Z,1509056481.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:21.296Z,1509056481.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:21.668Z,1509056481.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:21.751Z,1509056481.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:22.071Z,1509056482.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:22.088Z,1509056482.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:22.478Z,1509056482.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:22.524Z,1509056482.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:22.928Z,1509056482.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:23.015Z,1509056483.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:23.262Z,1509056483.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:23.278Z,1509056483.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:23.654Z,1509056483.654 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:21:23.681Z,1509056483.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:23.755Z,1509056483.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:24.080Z,1509056484.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:24.103Z,1509056484.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:24.477Z,1509056484.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:24.495Z,1509056484.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:24.863Z,1509056484.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:24.954Z,1509056484.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:25.272Z,1509056485.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:25.289Z,1509056485.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:25.672Z,1509056485.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:25.704Z,1509056485.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:26.076Z,1509056486.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:26.125Z,1509056486.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:26.477Z,1509056486.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:26.495Z,1509056486.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:26.868Z,1509056486.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:26.955Z,1509056486.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:27.271Z,1509056487.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:27.303Z,1509056487.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:27.668Z,1509056487.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:27.697Z,1509056487.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:28.075Z,1509056488.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:28.165Z,1509056488.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:28.475Z,1509056488.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:28.497Z,1509056488.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:28.878Z,1509056488.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:28.896Z,1509056488.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:29.265Z,1509056489.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:29.311Z,1509056489.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:29.669Z,1509056489.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:29.701Z,1509056489.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:30.078Z,1509056490.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:30.157Z,1509056490.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:30.479Z,1509056490.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:30.549Z,1509056490.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:30.871Z,1509056490.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:31.003Z,1509056491.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:31.261Z,1509056491.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:31.293Z,1509056491.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:31.672Z,1509056491.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:31.715Z,1509056491.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:32.068Z,1509056492.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:32.090Z,1509056492.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:32.475Z,1509056492.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:32.524Z,1509056492.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:32.874Z,1509056492.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:32.998Z,1509056492.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:33.266Z,1509056493.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:33.314Z,1509056493.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:33.667Z,1509056493.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:33.701Z,1509056493.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:34.070Z,1509056494.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:34.109Z,1509056494.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:34.471Z,1509056494.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:34.514Z,1509056494.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:34.872Z,1509056494.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:34.955Z,1509056494.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:35.279Z,1509056495.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:35.307Z,1509056495.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:35.668Z,1509056495.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:35.708Z,1509056495.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:36.071Z,1509056496.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:36.108Z,1509056496.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:36.468Z,1509056496.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:36.484Z,1509056496.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:36.880Z,1509056496.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:36.914Z,1509056496.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:37.273Z,1509056497.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:37.304Z,1509056497.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:37.676Z,1509056497.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:37.693Z,1509056497.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:38.081Z,1509056498.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:38.097Z,1509056498.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:38.468Z,1509056498.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:38.505Z,1509056498.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:38.865Z,1509056498.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:38.899Z,1509056498.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:39.273Z,1509056499.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:39.306Z,1509056499.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:39.672Z,1509056499.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:39.688Z,1509056499.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:40.069Z,1509056500.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:40.085Z,1509056500.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:40.477Z,1509056500.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:40.493Z,1509056500.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:40.875Z,1509056500.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:40.891Z,1509056500.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:41.320Z,1509056501.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:41.358Z,1509056501.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:41.679Z,1509056501.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:41.716Z,1509056501.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:42.064Z,1509056502.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:42.105Z,1509056502.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:42.470Z,1509056502.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:42.486Z,1509056502.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:42.874Z,1509056502.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:42.890Z,1509056502.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:43.272Z,1509056503.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:43.293Z,1509056503.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:43.678Z,1509056503.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:43.706Z,1509056503.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:44.082Z,1509056504.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:44.099Z,1509056504.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:44.484Z,1509056504.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:44.500Z,1509056504.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:44.865Z,1509056504.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:44.893Z,1509056504.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:45.269Z,1509056505.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:45.367Z,1509056505.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:45.683Z,1509056505.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:45.718Z,1509056505.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:46.071Z,1509056506.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:46.144Z,1509056506.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:46.477Z,1509056506.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:46.493Z,1509056506.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:46.884Z,1509056506.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:46.998Z,1509056506.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:47.284Z,1509056507.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:47.351Z,1509056507.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:47.667Z,1509056507.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:47.695Z,1509056507.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:48.067Z,1509056508.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:48.100Z,1509056508.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:48.479Z,1509056508.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:48.495Z,1509056508.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:48.874Z,1509056508.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:48.890Z,1509056508.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:49.271Z,1509056509.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:49.308Z,1509056509.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:49.677Z,1509056509.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:49.713Z,1509056509.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:50.072Z,1509056510.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:50.089Z,1509056510.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:50.481Z,1509056510.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:50.498Z,1509056510.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:50.889Z,1509056510.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:50.981Z,1509056510.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:51.281Z,1509056511.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:51.325Z,1509056511.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:51.679Z,1509056511.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:51.694Z,1509056511.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:52.069Z,1509056512.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:52.095Z,1509056512.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:52.466Z,1509056512.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:52.519Z,1509056512.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:52.860Z,1509056512.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:52.941Z,1509056512.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:53.271Z,1509056513.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:53.291Z,1509056513.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:53.678Z,1509056513.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:53.694Z,1509056513.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:54.082Z,1509056514.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:54.137Z,1509056514.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:54.474Z,1509056514.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:54.512Z,1509056514.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:54.869Z,1509056514.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:54.953Z,1509056514.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:55.268Z,1509056515.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:55.285Z,1509056515.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:55.679Z,1509056515.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:55.695Z,1509056515.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:56.078Z,1509056516.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:56.095Z,1509056516.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:56.482Z,1509056516.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:56.499Z,1509056516.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:56.881Z,1509056516.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:56.898Z,1509056516.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:57.278Z,1509056517.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:57.294Z,1509056517.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:57.674Z,1509056517.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:57.710Z,1509056517.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:58.074Z,1509056518.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:58.096Z,1509056518.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:58.663Z,1509056518.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:58.688Z,1509056518.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:59.050Z,1509056519.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:59.156Z,1509056519.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:59.455Z,1509056519.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:59.473Z,1509056519.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:21:59.871Z,1509056519.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:21:59.918Z,1509056519.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:00.256Z,1509056520.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:00.274Z,1509056520.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:00.666Z,1509056520.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:00.727Z,1509056520.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:01.048Z,1509056521.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:01.079Z,1509056521.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:01.444Z,1509056521.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:01.489Z,1509056521.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:01.848Z,1509056521.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:01.886Z,1509056521.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:02.249Z,1509056522.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:02.286Z,1509056522.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:02.653Z,1509056522.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:02.691Z,1509056522.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:03.047Z,1509056523.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:03.076Z,1509056523.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:03.443Z,1509056523.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:03.475Z,1509056523.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:03.840Z,1509056523.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:03.881Z,1509056523.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:04.265Z,1509056524.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:04.283Z,1509056524.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:04.643Z,1509056524.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:04.680Z,1509056524.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:05.047Z,1509056525.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:05.080Z,1509056525.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:05.448Z,1509056525.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:05.473Z,1509056525.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:05.877Z,1509056525.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:05.913Z,1509056525.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:06.237Z,1509056526.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:06.269Z,1509056526.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:06.644Z,1509056526.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:06.675Z,1509056526.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:07.045Z,1509056527.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:07.080Z,1509056527.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:07.454Z,1509056527.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:07.522Z,1509056527.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:07.847Z,1509056527.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:07.892Z,1509056527.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:08.251Z,1509056528.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:08.284Z,1509056528.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:08.649Z,1509056528.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:08.691Z,1509056528.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:09.056Z,1509056529.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:09.095Z,1509056529.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:09.449Z,1509056529.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:09.492Z,1509056529.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:09.861Z,1509056529.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:09.901Z,1509056529.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:10.252Z,1509056530.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:10.292Z,1509056530.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:10.647Z,1509056530.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:10.690Z,1509056530.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:11.063Z,1509056531.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:11.148Z,1509056531.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:11.448Z,1509056531.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:11.477Z,1509056531.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:11.858Z,1509056531.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:11.902Z,1509056531.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:12.253Z,1509056532.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:12.285Z,1509056532.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:12.654Z,1509056532.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:12.699Z,1509056532.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:13.062Z,1509056533.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:13.086Z,1509056533.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:13.466Z,1509056533.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:13.544Z,1509056533.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:14.035Z,1509056534.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:14.064Z,1509056534.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:14.439Z,1509056534.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:14.478Z,1509056534.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:14.835Z,1509056534.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:14.851Z,1509056534.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:15.229Z,1509056535.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:15.278Z,1509056535.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:15.641Z,1509056535.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:15.693Z,1509056535.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:16.028Z,1509056536.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:16.066Z,1509056536.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:16.439Z,1509056536.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:16.470Z,1509056536.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:16.840Z,1509056536.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:17.007Z,1509056537.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:17.247Z,1509056537.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:17.263Z,1509056537.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:17.639Z,1509056537.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:17.656Z,1509056537.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:18.048Z,1509056538.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:18.064Z,1509056538.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:18.430Z,1509056538.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:18.468Z,1509056538.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:18.829Z,1509056538.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:18.875Z,1509056538.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:19.242Z,1509056539.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:19.258Z,1509056539.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:19.645Z,1509056539.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:19.661Z,1509056539.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:20.057Z,1509056540.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:20.080Z,1509056540.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:20.432Z,1509056540.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:20.463Z,1509056540.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:20.843Z,1509056540.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:20.871Z,1509056540.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:21.243Z,1509056541.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:21.273Z,1509056541.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:21.633Z,1509056541.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:21.650Z,1509056541.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:22.040Z,1509056542.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:22.078Z,1509056542.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:22.441Z,1509056542.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:22.457Z,1509056542.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:22.847Z,1509056542.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:22.863Z,1509056542.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:23.234Z,1509056543.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:23.267Z,1509056543.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:23.647Z,1509056543.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:23.678Z,1509056543.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:24.006Z,1509056544.006 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:22:24.045Z,1509056544.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:24.092Z,1509056544.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:24.436Z,1509056544.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:24.452Z,1509056544.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:24.837Z,1509056544.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:24.853Z,1509056544.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:25.237Z,1509056545.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:25.276Z,1509056545.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:25.641Z,1509056545.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:25.683Z,1509056545.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:26.041Z,1509056546.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:26.077Z,1509056546.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:26.439Z,1509056546.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:26.455Z,1509056546.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:26.843Z,1509056546.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:26.859Z,1509056546.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:27.241Z,1509056547.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:27.257Z,1509056547.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:27.646Z,1509056547.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:27.702Z,1509056547.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:28.037Z,1509056548.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:28.094Z,1509056548.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:28.441Z,1509056548.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:28.463Z,1509056548.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:28.848Z,1509056548.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:28.864Z,1509056548.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:29.239Z,1509056549.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:29.296Z,1509056549.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:29.641Z,1509056549.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:29.667Z,1509056549.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:30.041Z,1509056550.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:30.129Z,1509056550.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:30.438Z,1509056550.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:30.494Z,1509056550.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:30.836Z,1509056550.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:30.852Z,1509056550.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:31.246Z,1509056551.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:31.262Z,1509056551.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:31.629Z,1509056551.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:31.661Z,1509056551.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:32.029Z,1509056552.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:32.059Z,1509056552.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:32.576Z,1509056552.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:32.612Z,1509056552.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:32.980Z,1509056552.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:33.035Z,1509056553.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:33.379Z,1509056553.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:33.411Z,1509056553.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:33.783Z,1509056553.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:33.811Z,1509056553.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:34.187Z,1509056554.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:34.221Z,1509056554.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:34.573Z,1509056554.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:34.620Z,1509056554.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:35.013Z,1509056555.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:35.050Z,1509056555.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:35.382Z,1509056555.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:35.415Z,1509056555.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:35.786Z,1509056555.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:35.832Z,1509056555.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:36.189Z,1509056556.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:36.205Z,1509056556.205 [PNI_TCM](ERROR): CRC does not match. Expected:0x11715 got:0x49294
2017-10-26T22:22:36.245Z,1509056556.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:36.571Z,1509056556.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:36.610Z,1509056556.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:36.981Z,1509056556.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:37.013Z,1509056557.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:37.380Z,1509056557.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:37.423Z,1509056557.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:37.787Z,1509056557.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:37.828Z,1509056557.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:38.192Z,1509056558.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:38.209Z,1509056558.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:38.596Z,1509056558.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:38.613Z,1509056558.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:39.003Z,1509056559.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:39.040Z,1509056559.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:39.397Z,1509056559.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:39.422Z,1509056559.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:39.788Z,1509056559.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:39.824Z,1509056559.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:40.204Z,1509056560.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:40.221Z,1509056560.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:40.587Z,1509056560.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:40.619Z,1509056560.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:40.977Z,1509056560.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:41.036Z,1509056561.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:41.403Z,1509056561.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:41.418Z,1509056561.418 [PNI_TCM](ERROR): CRC does not match. Expected:0x53355 got:0x65049
2017-10-26T22:22:41.451Z,1509056561.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:41.799Z,1509056561.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:41.839Z,1509056561.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:42.186Z,1509056562.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:42.231Z,1509056562.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:42.602Z,1509056562.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:42.613Z,1509056562.613 [PNI_TCM](ERROR): CRC does not match. Expected:0x16713 got:0x36041
2017-10-26T22:22:42.701Z,1509056562.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:42.971Z,1509056562.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:43.030Z,1509056563.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:43.382Z,1509056563.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:43.454Z,1509056563.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:43.783Z,1509056563.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:43.822Z,1509056563.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:44.202Z,1509056564.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:44.262Z,1509056564.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:44.589Z,1509056564.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:44.662Z,1509056564.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:44.993Z,1509056564.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:45.027Z,1509056565.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:45.377Z,1509056565.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:45.425Z,1509056565.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:45.773Z,1509056565.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:45.823Z,1509056565.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:46.199Z,1509056566.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:46.216Z,1509056566.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:46.596Z,1509056566.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:46.613Z,1509056566.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:47.022Z,1509056567.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:47.101Z,1509056567.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:47.381Z,1509056567.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:47.409Z,1509056567.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:47.780Z,1509056567.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:47.812Z,1509056567.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:48.196Z,1509056568.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:48.231Z,1509056568.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:48.577Z,1509056568.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:48.618Z,1509056568.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:49.043Z,1509056569.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:49.070Z,1509056569.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:49.380Z,1509056569.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:49.419Z,1509056569.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:49.779Z,1509056569.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:49.812Z,1509056569.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:50.182Z,1509056570.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:50.224Z,1509056570.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:50.576Z,1509056570.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:50.612Z,1509056570.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:51.018Z,1509056571.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:51.048Z,1509056571.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:51.379Z,1509056571.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:51.395Z,1509056571.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:51.780Z,1509056571.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:51.813Z,1509056571.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:52.193Z,1509056572.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:52.215Z,1509056572.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:52.592Z,1509056572.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:52.626Z,1509056572.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:52.988Z,1509056572.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:53.021Z,1509056573.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:53.374Z,1509056573.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:53.429Z,1509056573.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:53.769Z,1509056573.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:53.815Z,1509056573.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:54.194Z,1509056574.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:54.211Z,1509056574.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:54.593Z,1509056574.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:54.638Z,1509056574.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:55.004Z,1509056575.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:55.038Z,1509056575.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:55.381Z,1509056575.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:55.406Z,1509056575.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:55.787Z,1509056575.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:55.812Z,1509056575.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:56.190Z,1509056576.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:56.223Z,1509056576.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:56.586Z,1509056576.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:56.691Z,1509056576.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:56.995Z,1509056576.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:57.002Z,1509056577.002 [PNI_TCM](ERROR): CRC does not match. Expected:0x12248 got:0x8503
2017-10-26T22:22:57.038Z,1509056577.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:57.395Z,1509056577.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:57.447Z,1509056577.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:57.796Z,1509056577.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:57.812Z,1509056577.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:58.170Z,1509056578.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:58.243Z,1509056578.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:58.592Z,1509056578.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:58.647Z,1509056578.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:58.982Z,1509056578.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:59.026Z,1509056579.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:59.374Z,1509056579.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:59.406Z,1509056579.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:22:59.779Z,1509056579.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:22:59.814Z,1509056579.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:00.177Z,1509056580.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:00.207Z,1509056580.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:00.590Z,1509056580.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:00.627Z,1509056580.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:00.995Z,1509056580.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:01.043Z,1509056581.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:01.373Z,1509056581.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:01.425Z,1509056581.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:01.793Z,1509056581.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:01.819Z,1509056581.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:02.194Z,1509056582.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:02.210Z,1509056582.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:02.585Z,1509056582.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:02.628Z,1509056582.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:02.991Z,1509056582.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:03.025Z,1509056583.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:03.374Z,1509056583.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:03.416Z,1509056583.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:03.820Z,1509056583.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:03.852Z,1509056583.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:04.199Z,1509056584.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:04.216Z,1509056584.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:04.571Z,1509056584.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:04.623Z,1509056584.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:04.971Z,1509056584.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:05.022Z,1509056585.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:05.383Z,1509056585.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:05.416Z,1509056585.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:05.791Z,1509056585.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:05.839Z,1509056585.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:06.187Z,1509056586.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:06.241Z,1509056586.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:06.579Z,1509056586.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:06.596Z,1509056586.596 [PNI_TCM](ERROR): CRC does not match. Expected:0x57579 got:0x24974
2017-10-26T22:23:06.626Z,1509056586.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:06.993Z,1509056586.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:07.010Z,1509056587.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:07.404Z,1509056587.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:07.436Z,1509056587.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:07.789Z,1509056587.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:07.816Z,1509056587.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:08.173Z,1509056588.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:08.220Z,1509056588.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:08.587Z,1509056588.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:08.613Z,1509056588.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:09.006Z,1509056589.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:09.022Z,1509056589.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:09.383Z,1509056589.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:09.431Z,1509056589.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:09.789Z,1509056589.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:09.798Z,1509056589.798 [PNI_TCM](ERROR): CRC does not match. Expected:0x29103 got:0x1857
2017-10-26T22:23:09.835Z,1509056589.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:10.197Z,1509056590.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:10.230Z,1509056590.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:10.591Z,1509056590.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:10.620Z,1509056590.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:11.020Z,1509056591.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:11.124Z,1509056591.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:11.377Z,1509056591.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:11.420Z,1509056591.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:11.784Z,1509056591.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:11.834Z,1509056591.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:12.189Z,1509056592.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:12.218Z,1509056592.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:12.584Z,1509056592.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:12.636Z,1509056592.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:13.042Z,1509056593.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:13.146Z,1509056593.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:13.390Z,1509056593.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:13.415Z,1509056593.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:13.792Z,1509056593.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:13.808Z,1509056593.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:14.209Z,1509056594.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:14.238Z,1509056594.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:14.597Z,1509056594.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:14.622Z,1509056594.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:14.999Z,1509056594.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:15.042Z,1509056595.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:15.384Z,1509056595.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:15.425Z,1509056595.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:15.772Z,1509056595.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:15.824Z,1509056595.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:16.190Z,1509056596.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:16.223Z,1509056596.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:16.590Z,1509056596.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:16.618Z,1509056596.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:16.988Z,1509056596.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:17.022Z,1509056597.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:17.385Z,1509056597.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:17.425Z,1509056597.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:17.799Z,1509056597.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:17.815Z,1509056597.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:18.191Z,1509056598.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:18.216Z,1509056598.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:18.587Z,1509056598.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:18.616Z,1509056598.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:18.976Z,1509056598.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:19.029Z,1509056599.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:19.375Z,1509056599.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:19.409Z,1509056599.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:19.791Z,1509056599.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:19.820Z,1509056599.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:20.194Z,1509056600.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:20.227Z,1509056600.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:20.591Z,1509056600.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:20.625Z,1509056600.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:20.994Z,1509056600.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:21.023Z,1509056601.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:21.398Z,1509056601.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:21.427Z,1509056601.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:21.780Z,1509056601.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:21.817Z,1509056601.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:22.177Z,1509056602.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:22.225Z,1509056602.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:22.590Z,1509056602.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:22.626Z,1509056602.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:22.989Z,1509056602.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:23.014Z,1509056603.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:23.393Z,1509056603.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:23.410Z,1509056603.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:23.751Z,1509056603.751 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:23:23.776Z,1509056603.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:23.826Z,1509056603.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:24.204Z,1509056604.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:24.225Z,1509056604.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:24.572Z,1509056604.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:24.608Z,1509056604.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:24.999Z,1509056604.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:25.063Z,1509056605.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:25.399Z,1509056605.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:25.467Z,1509056605.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:25.780Z,1509056605.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:25.805Z,1509056605.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:26.192Z,1509056606.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:26.248Z,1509056606.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:26.589Z,1509056606.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:26.605Z,1509056606.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:26.990Z,1509056606.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:27.047Z,1509056607.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:27.394Z,1509056607.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:27.441Z,1509056607.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:27.783Z,1509056607.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:27.816Z,1509056607.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:28.194Z,1509056608.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:28.226Z,1509056608.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:28.580Z,1509056608.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:28.623Z,1509056608.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:28.980Z,1509056608.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:29.014Z,1509056609.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:29.405Z,1509056609.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:29.434Z,1509056609.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:29.788Z,1509056609.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:29.824Z,1509056609.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:30.189Z,1509056610.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:30.235Z,1509056610.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:30.589Z,1509056610.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:30.605Z,1509056610.605 [PNI_TCM](ERROR): CRC does not match. Expected:0x37756 got:0x46592
2017-10-26T22:23:30.625Z,1509056610.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:30.989Z,1509056610.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:31.010Z,1509056611.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:31.400Z,1509056611.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:31.425Z,1509056611.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:31.787Z,1509056611.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:31.821Z,1509056611.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:32.196Z,1509056612.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:32.205Z,1509056612.205 [PNI_TCM](ERROR): CRC does not match. Expected:0x54859 got:0x54552
2017-10-26T22:23:32.245Z,1509056612.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:32.569Z,1509056612.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:32.613Z,1509056612.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:33.008Z,1509056613.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:33.015Z,1509056613.015 [PNI_TCM](ERROR): CRC does not match. Expected:0x14013 got:0x1857
2017-10-26T22:23:33.041Z,1509056613.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:33.380Z,1509056613.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:33.420Z,1509056613.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:33.779Z,1509056613.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:33.819Z,1509056613.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:34.181Z,1509056614.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:34.215Z,1509056614.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:34.594Z,1509056614.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:34.627Z,1509056614.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:34.992Z,1509056614.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:35.036Z,1509056615.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:35.386Z,1509056615.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:35.415Z,1509056615.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:35.779Z,1509056615.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:35.817Z,1509056615.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:36.182Z,1509056616.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:36.213Z,1509056616.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:36.580Z,1509056616.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:36.625Z,1509056616.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:36.992Z,1509056616.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:37.025Z,1509056617.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:37.386Z,1509056617.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:37.415Z,1509056617.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:37.784Z,1509056617.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:37.829Z,1509056617.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:38.189Z,1509056618.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:38.214Z,1509056618.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:38.594Z,1509056618.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:38.622Z,1509056618.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:38.996Z,1509056618.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:39.031Z,1509056619.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:39.407Z,1509056619.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:39.454Z,1509056619.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:39.772Z,1509056619.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:39.814Z,1509056619.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:40.199Z,1509056620.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:40.215Z,1509056620.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:40.584Z,1509056620.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:40.617Z,1509056620.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:40.987Z,1509056620.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:41.019Z,1509056621.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:41.383Z,1509056621.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:41.419Z,1509056621.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:41.776Z,1509056621.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:41.812Z,1509056621.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:42.196Z,1509056622.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:42.226Z,1509056622.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:42.591Z,1509056622.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:42.603Z,1509056622.603 [BPC1](ERROR): Failed to receive battery data
2017-10-26T22:23:42.603Z,1509056622.603 [BPC1] Communications Fault, FailCount= 1
2017-10-26T22:23:42.604Z,1509056622.604 [BPC1](ERROR): Communications Fault
2017-10-26T22:23:42.617Z,1509056622.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:42.689Z,1509056622.689 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T22:23:42.977Z,1509056622.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:43.016Z,1509056623.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:43.375Z,1509056623.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:43.421Z,1509056623.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:43.789Z,1509056623.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:43.816Z,1509056623.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:43.877Z,1509056623.877 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:23:43.878Z,1509056623.878 [BPC1] No Fault, FailCount= 1
2017-10-26T22:23:44.193Z,1509056624.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:44.280Z,1509056624.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:44.581Z,1509056624.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:44.617Z,1509056624.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:44.980Z,1509056624.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:45.006Z,1509056625.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:45.387Z,1509056625.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:45.438Z,1509056625.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:45.792Z,1509056625.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:45.839Z,1509056625.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:46.203Z,1509056626.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:46.220Z,1509056626.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:46.593Z,1509056626.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:46.622Z,1509056626.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:47.015Z,1509056627.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:47.065Z,1509056627.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:47.381Z,1509056627.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:47.422Z,1509056627.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:47.983Z,1509056627.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:48.028Z,1509056628.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:48.368Z,1509056628.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:48.385Z,1509056628.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:48.766Z,1509056628.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:48.791Z,1509056628.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:49.180Z,1509056629.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:49.224Z,1509056629.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:49.579Z,1509056629.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:49.624Z,1509056629.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:49.966Z,1509056629.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:49.988Z,1509056629.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:50.368Z,1509056630.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:50.388Z,1509056630.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:50.758Z,1509056630.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:50.794Z,1509056630.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:51.166Z,1509056631.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:51.194Z,1509056631.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:51.567Z,1509056631.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:51.605Z,1509056631.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:51.960Z,1509056631.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:52.005Z,1509056632.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:52.368Z,1509056632.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:52.404Z,1509056632.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:52.765Z,1509056632.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:52.799Z,1509056632.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:53.179Z,1509056633.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:53.196Z,1509056633.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:53.566Z,1509056633.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:53.618Z,1509056633.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:53.966Z,1509056633.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:53.989Z,1509056633.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:54.376Z,1509056634.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:54.393Z,1509056634.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:54.764Z,1509056634.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:54.801Z,1509056634.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:55.184Z,1509056635.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:55.200Z,1509056635.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:55.562Z,1509056635.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:55.602Z,1509056635.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:55.963Z,1509056635.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:56.022Z,1509056636.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:56.372Z,1509056636.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:56.389Z,1509056636.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:56.865Z,1509056636.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:56.949Z,1509056636.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:57.252Z,1509056637.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:57.289Z,1509056637.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:57.671Z,1509056637.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:57.732Z,1509056637.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:58.061Z,1509056638.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:58.099Z,1509056638.099 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:58.099Z,1509056638.099 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 52
2017-10-26T22:23:58.100Z,1509056638.100 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:23:58.106Z,1509056638.106 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:58.106Z,1509056638.106 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 52
2017-10-26T22:23:58.106Z,1509056638.106 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:23:58.205Z,1509056638.205 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:23:58.205Z,1509056638.205 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:23:58.457Z,1509056638.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:58.717Z,1509056638.717 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:23:58.718Z,1509056638.718 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 52
2017-10-26T22:23:58.718Z,1509056638.718 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:23:58.718Z,1509056638.718 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 52
2017-10-26T22:23:58.848Z,1509056638.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:58.949Z,1509056638.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:23:58.950Z,1509056638.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:23:58.950Z,1509056638.950 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:23:58.961Z,1509056638.961 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:23:58.961Z,1509056638.961 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:23:58.962Z,1509056638.962 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:23:59.267Z,1509056639.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:59.285Z,1509056639.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:23:59.668Z,1509056639.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:23:59.685Z,1509056639.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:00.067Z,1509056640.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:00.083Z,1509056640.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:00.468Z,1509056640.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:00.489Z,1509056640.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:00.900Z,1509056640.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:00.961Z,1509056640.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:01.254Z,1509056641.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:01.270Z,1509056641.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:01.656Z,1509056641.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:01.673Z,1509056641.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:02.062Z,1509056642.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:02.079Z,1509056642.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:02.464Z,1509056642.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:02.480Z,1509056642.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:02.880Z,1509056642.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:02.960Z,1509056642.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:03.264Z,1509056643.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:03.280Z,1509056643.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:03.666Z,1509056643.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:03.687Z,1509056643.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:04.058Z,1509056644.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:04.088Z,1509056644.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:04.463Z,1509056644.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:04.494Z,1509056644.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:04.866Z,1509056644.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:04.905Z,1509056644.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:05.259Z,1509056645.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:05.282Z,1509056645.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:05.653Z,1509056645.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:05.681Z,1509056645.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:06.056Z,1509056646.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:06.092Z,1509056646.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:06.454Z,1509056646.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:06.490Z,1509056646.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:06.860Z,1509056646.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:06.901Z,1509056646.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:07.267Z,1509056647.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:07.283Z,1509056647.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:07.663Z,1509056647.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:07.679Z,1509056647.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:08.071Z,1509056648.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:08.087Z,1509056648.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:08.470Z,1509056648.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:08.486Z,1509056648.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:08.871Z,1509056648.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:08.887Z,1509056648.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:09.266Z,1509056649.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:09.290Z,1509056649.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:09.661Z,1509056649.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:09.712Z,1509056649.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:10.059Z,1509056650.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:10.075Z,1509056650.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:10.463Z,1509056650.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:10.488Z,1509056650.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:10.865Z,1509056650.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:10.976Z,1509056650.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:11.253Z,1509056651.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:11.275Z,1509056651.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:11.664Z,1509056651.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:11.715Z,1509056651.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:12.074Z,1509056652.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:12.107Z,1509056652.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:12.455Z,1509056652.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:12.512Z,1509056652.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:12.876Z,1509056652.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:12.924Z,1509056652.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:13.454Z,1509056653.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:13.476Z,1509056653.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:13.850Z,1509056653.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:13.873Z,1509056653.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:14.253Z,1509056654.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:14.271Z,1509056654.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:14.656Z,1509056654.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:14.678Z,1509056654.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:15.067Z,1509056655.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:15.100Z,1509056655.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:15.452Z,1509056655.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:15.468Z,1509056655.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:15.854Z,1509056655.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:15.873Z,1509056655.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:16.246Z,1509056656.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:16.266Z,1509056656.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:16.642Z,1509056656.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:16.687Z,1509056656.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:17.044Z,1509056657.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:17.083Z,1509056657.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:17.441Z,1509056657.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:17.458Z,1509056657.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:17.852Z,1509056657.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:17.869Z,1509056657.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:18.250Z,1509056658.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:18.291Z,1509056658.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:18.645Z,1509056658.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:18.677Z,1509056658.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:19.050Z,1509056659.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:19.099Z,1509056659.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:19.445Z,1509056659.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:19.462Z,1509056659.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:19.843Z,1509056659.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:19.871Z,1509056659.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:20.259Z,1509056660.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:20.275Z,1509056660.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:20.668Z,1509056660.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:20.689Z,1509056660.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:21.040Z,1509056661.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:21.061Z,1509056661.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:21.440Z,1509056661.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:21.465Z,1509056661.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:21.846Z,1509056661.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:21.908Z,1509056661.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:22.240Z,1509056662.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:22.256Z,1509056662.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:22.342Z,1509056662.342 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T22:24:22.644Z,1509056662.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:22.661Z,1509056662.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:23.048Z,1509056663.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:23.065Z,1509056663.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:23.449Z,1509056663.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:23.525Z,1509056663.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:23.858Z,1509056663.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:23.874Z,1509056663.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:24.220Z,1509056664.220 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:24:24.246Z,1509056664.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:24.284Z,1509056664.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:24.640Z,1509056664.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:24.699Z,1509056664.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:25.043Z,1509056665.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:25.076Z,1509056665.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:25.451Z,1509056665.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:25.497Z,1509056665.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:25.849Z,1509056665.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:25.865Z,1509056665.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:26.248Z,1509056666.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:26.314Z,1509056666.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:26.649Z,1509056666.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:26.698Z,1509056666.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:27.046Z,1509056667.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:27.062Z,1509056667.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:27.465Z,1509056667.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:27.494Z,1509056667.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:27.841Z,1509056667.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:27.871Z,1509056667.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:28.252Z,1509056668.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:28.288Z,1509056668.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:28.641Z,1509056668.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:28.677Z,1509056668.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:29.053Z,1509056669.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:29.088Z,1509056669.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:29.444Z,1509056669.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:29.460Z,1509056669.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:29.847Z,1509056669.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:29.879Z,1509056669.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:30.252Z,1509056670.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:30.284Z,1509056670.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:30.641Z,1509056670.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:30.671Z,1509056670.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:31.044Z,1509056671.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:31.077Z,1509056671.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:31.449Z,1509056671.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:31.473Z,1509056671.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:31.843Z,1509056671.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:31.859Z,1509056671.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:32.246Z,1509056672.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:32.262Z,1509056672.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:32.649Z,1509056672.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:32.669Z,1509056672.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:33.055Z,1509056673.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:33.089Z,1509056673.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:33.454Z,1509056673.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:33.480Z,1509056673.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:33.839Z,1509056673.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:33.870Z,1509056673.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:34.243Z,1509056674.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:34.282Z,1509056674.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:34.643Z,1509056674.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:34.672Z,1509056674.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:35.061Z,1509056675.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:35.144Z,1509056675.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:35.451Z,1509056675.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:35.472Z,1509056675.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:35.850Z,1509056675.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:35.866Z,1509056675.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:36.256Z,1509056676.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:36.272Z,1509056676.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:36.647Z,1509056676.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:36.672Z,1509056676.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:37.038Z,1509056677.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:37.066Z,1509056677.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:37.446Z,1509056677.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:37.507Z,1509056677.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:37.841Z,1509056677.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:37.891Z,1509056677.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:38.244Z,1509056678.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:38.292Z,1509056678.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:38.649Z,1509056678.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:38.719Z,1509056678.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:39.041Z,1509056679.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:39.101Z,1509056679.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:39.457Z,1509056679.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:39.506Z,1509056679.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:39.849Z,1509056679.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:39.896Z,1509056679.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:40.251Z,1509056680.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:40.343Z,1509056680.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:40.644Z,1509056680.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:40.660Z,1509056680.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:41.052Z,1509056681.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:41.136Z,1509056681.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:41.442Z,1509056681.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:41.506Z,1509056681.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:41.841Z,1509056681.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:41.873Z,1509056681.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:42.254Z,1509056682.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:42.285Z,1509056682.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:42.645Z,1509056682.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:42.674Z,1509056682.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:43.084Z,1509056683.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:43.144Z,1509056683.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:43.447Z,1509056683.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:43.467Z,1509056683.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:43.848Z,1509056683.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:43.872Z,1509056683.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:44.249Z,1509056684.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:44.266Z,1509056684.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:44.646Z,1509056684.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:44.676Z,1509056684.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:45.033Z,1509056685.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:45.049Z,1509056685.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:45.453Z,1509056685.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:45.492Z,1509056685.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:45.846Z,1509056685.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:45.864Z,1509056685.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:46.248Z,1509056686.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:46.264Z,1509056686.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:46.661Z,1509056686.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:46.690Z,1509056686.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:47.051Z,1509056687.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:47.066Z,1509056687.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:47.458Z,1509056687.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:47.475Z,1509056687.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:47.861Z,1509056687.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:47.877Z,1509056687.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:48.257Z,1509056688.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:48.273Z,1509056688.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:48.657Z,1509056688.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:48.693Z,1509056688.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:49.042Z,1509056689.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:49.085Z,1509056689.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:49.435Z,1509056689.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:49.452Z,1509056689.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:49.838Z,1509056689.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:49.878Z,1509056689.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:50.247Z,1509056690.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:50.271Z,1509056690.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:50.656Z,1509056690.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:50.677Z,1509056690.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:51.049Z,1509056691.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:51.066Z,1509056691.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:51.457Z,1509056691.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:51.473Z,1509056691.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:51.842Z,1509056691.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:51.878Z,1509056691.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:52.248Z,1509056692.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:52.329Z,1509056692.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:52.643Z,1509056692.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:52.661Z,1509056692.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:53.062Z,1509056693.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:53.144Z,1509056693.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:53.449Z,1509056693.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:53.512Z,1509056693.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:53.849Z,1509056693.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:53.867Z,1509056693.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:54.257Z,1509056694.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:54.300Z,1509056694.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:54.654Z,1509056694.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:54.671Z,1509056694.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:55.051Z,1509056695.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:55.114Z,1509056695.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:55.443Z,1509056695.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:55.472Z,1509056695.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:55.844Z,1509056695.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:55.907Z,1509056695.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:56.249Z,1509056696.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:56.266Z,1509056696.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:56.655Z,1509056696.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:56.673Z,1509056696.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:57.041Z,1509056697.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:57.074Z,1509056697.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:57.459Z,1509056697.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:57.476Z,1509056697.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:57.846Z,1509056697.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:57.900Z,1509056697.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:58.437Z,1509056698.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:58.453Z,1509056698.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:58.839Z,1509056698.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:58.903Z,1509056698.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:59.233Z,1509056699.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:59.249Z,1509056699.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:24:59.634Z,1509056699.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:24:59.651Z,1509056699.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:00.036Z,1509056700.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:00.052Z,1509056700.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:00.436Z,1509056700.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:00.452Z,1509056700.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:00.846Z,1509056700.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:00.937Z,1509056700.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:01.231Z,1509056701.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:01.277Z,1509056701.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:01.636Z,1509056701.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:01.652Z,1509056701.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:02.033Z,1509056702.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:02.053Z,1509056702.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:02.435Z,1509056702.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:02.468Z,1509056702.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:02.836Z,1509056702.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:02.858Z,1509056702.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:03.227Z,1509056703.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:03.266Z,1509056703.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:03.635Z,1509056703.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:03.663Z,1509056703.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:04.036Z,1509056704.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:04.067Z,1509056704.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:04.434Z,1509056704.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:04.467Z,1509056704.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:04.841Z,1509056704.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:04.925Z,1509056704.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:05.245Z,1509056705.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:05.266Z,1509056705.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:05.643Z,1509056705.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:05.659Z,1509056705.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:06.045Z,1509056706.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:06.062Z,1509056706.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:06.441Z,1509056706.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:06.503Z,1509056706.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:06.830Z,1509056706.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:06.860Z,1509056706.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:07.228Z,1509056707.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:07.250Z,1509056707.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:07.641Z,1509056707.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:07.698Z,1509056707.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:08.051Z,1509056708.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:08.100Z,1509056708.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:08.435Z,1509056708.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:08.456Z,1509056708.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:08.843Z,1509056708.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:08.944Z,1509056708.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:09.233Z,1509056709.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:09.265Z,1509056709.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:09.638Z,1509056709.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:09.697Z,1509056709.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:10.039Z,1509056710.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:10.098Z,1509056710.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:10.436Z,1509056710.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:10.458Z,1509056710.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:10.839Z,1509056710.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:10.855Z,1509056710.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:11.239Z,1509056711.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:11.264Z,1509056711.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:11.637Z,1509056711.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:11.670Z,1509056711.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:12.040Z,1509056712.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:12.086Z,1509056712.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:12.428Z,1509056712.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:12.470Z,1509056712.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:12.836Z,1509056712.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:12.864Z,1509056712.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:13.232Z,1509056713.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:13.264Z,1509056713.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:13.645Z,1509056713.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:13.687Z,1509056713.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:14.038Z,1509056714.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:14.055Z,1509056714.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:14.427Z,1509056714.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:14.463Z,1509056714.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:14.840Z,1509056714.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:14.864Z,1509056714.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:15.231Z,1509056715.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:15.263Z,1509056715.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:15.804Z,1509056715.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:15.837Z,1509056715.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:16.204Z,1509056716.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:16.240Z,1509056716.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:16.607Z,1509056716.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:16.639Z,1509056716.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:17.004Z,1509056717.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:17.050Z,1509056717.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:17.392Z,1509056717.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:17.443Z,1509056717.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:17.811Z,1509056717.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:17.834Z,1509056717.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:18.211Z,1509056718.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:18.239Z,1509056718.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:18.606Z,1509056718.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:18.622Z,1509056718.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:19.017Z,1509056719.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:19.046Z,1509056719.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:19.400Z,1509056719.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:19.425Z,1509056719.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:19.804Z,1509056719.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:19.840Z,1509056719.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:20.211Z,1509056720.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:20.242Z,1509056720.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:20.610Z,1509056720.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:20.634Z,1509056720.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:21.002Z,1509056721.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:21.070Z,1509056721.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:21.419Z,1509056721.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:21.435Z,1509056721.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:21.810Z,1509056721.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:21.826Z,1509056721.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:22.207Z,1509056722.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:22.276Z,1509056722.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:22.594Z,1509056722.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:22.626Z,1509056722.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:23.001Z,1509056723.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:23.054Z,1509056723.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:23.440Z,1509056723.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:23.467Z,1509056723.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:23.814Z,1509056723.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:23.856Z,1509056723.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:24.217Z,1509056724.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:24.274Z,1509056724.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:24.576Z,1509056724.576 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:25:24.614Z,1509056724.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:24.648Z,1509056724.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:25.006Z,1509056725.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:25.022Z,1509056725.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:25.417Z,1509056725.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:25.449Z,1509056725.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:25.800Z,1509056725.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:25.846Z,1509056725.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:26.198Z,1509056726.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:26.231Z,1509056726.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:26.607Z,1509056726.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:26.629Z,1509056726.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:27.010Z,1509056727.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:27.042Z,1509056727.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:27.398Z,1509056727.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:27.430Z,1509056727.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:27.799Z,1509056727.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:27.828Z,1509056727.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:28.213Z,1509056728.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:28.230Z,1509056728.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:28.606Z,1509056728.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:28.635Z,1509056728.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:29.015Z,1509056729.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:29.040Z,1509056729.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:29.410Z,1509056729.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:29.448Z,1509056729.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:29.804Z,1509056729.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:29.828Z,1509056729.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:30.197Z,1509056730.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:30.237Z,1509056730.237 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:30.600Z,1509056730.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:30.641Z,1509056730.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:31.006Z,1509056731.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:31.035Z,1509056731.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:31.409Z,1509056731.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:31.442Z,1509056731.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:31.796Z,1509056731.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:31.831Z,1509056731.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:32.209Z,1509056732.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:32.226Z,1509056732.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:32.611Z,1509056732.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:32.627Z,1509056732.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:33.001Z,1509056733.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:33.029Z,1509056733.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:33.407Z,1509056733.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:33.437Z,1509056733.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:33.802Z,1509056733.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:33.830Z,1509056733.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:34.214Z,1509056734.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:34.230Z,1509056734.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:34.611Z,1509056734.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:34.628Z,1509056734.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:34.991Z,1509056734.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:35.047Z,1509056735.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:35.395Z,1509056735.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:35.431Z,1509056735.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:35.804Z,1509056735.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:35.839Z,1509056735.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:36.228Z,1509056736.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:36.289Z,1509056736.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:36.609Z,1509056736.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:36.626Z,1509056736.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:37.018Z,1509056737.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:37.068Z,1509056737.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:37.409Z,1509056737.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:37.425Z,1509056737.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:37.806Z,1509056737.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:37.864Z,1509056737.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:38.328Z,1509056738.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:38.371Z,1509056738.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:38.738Z,1509056738.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:38.767Z,1509056738.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:39.163Z,1509056739.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:39.191Z,1509056739.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:39.546Z,1509056739.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:39.575Z,1509056739.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:39.927Z,1509056739.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:39.963Z,1509056739.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:40.348Z,1509056740.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:40.368Z,1509056740.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:40.739Z,1509056740.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:40.779Z,1509056740.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:41.167Z,1509056741.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:41.190Z,1509056741.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:41.546Z,1509056741.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:41.591Z,1509056741.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:41.942Z,1509056741.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:41.963Z,1509056741.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:42.338Z,1509056742.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:42.354Z,1509056742.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:42.746Z,1509056742.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:42.763Z,1509056742.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:43.153Z,1509056743.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:43.169Z,1509056743.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:43.547Z,1509056743.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:43.564Z,1509056743.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:43.935Z,1509056743.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:43.968Z,1509056743.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:44.353Z,1509056744.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:44.383Z,1509056744.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:44.727Z,1509056744.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:44.766Z,1509056744.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:45.162Z,1509056745.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:45.179Z,1509056745.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:45.534Z,1509056745.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:45.569Z,1509056745.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:45.935Z,1509056745.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:45.976Z,1509056745.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:46.344Z,1509056746.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:46.379Z,1509056746.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:46.742Z,1509056746.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:46.780Z,1509056746.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:47.159Z,1509056747.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:47.181Z,1509056747.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:47.544Z,1509056747.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:47.577Z,1509056747.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:47.944Z,1509056747.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:47.961Z,1509056747.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:48.342Z,1509056748.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:48.359Z,1509056748.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:48.749Z,1509056748.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:48.769Z,1509056748.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:49.168Z,1509056749.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:49.281Z,1509056749.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:49.540Z,1509056749.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:49.576Z,1509056749.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:49.936Z,1509056749.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:49.965Z,1509056749.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:50.337Z,1509056750.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:50.400Z,1509056750.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:50.748Z,1509056750.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:50.783Z,1509056750.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:51.154Z,1509056751.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:51.218Z,1509056751.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:51.546Z,1509056751.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:51.629Z,1509056751.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:51.934Z,1509056751.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:51.994Z,1509056751.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:52.333Z,1509056752.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:52.391Z,1509056752.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:52.738Z,1509056752.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:52.783Z,1509056752.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:53.161Z,1509056753.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:53.198Z,1509056753.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:53.547Z,1509056753.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:53.630Z,1509056753.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:53.928Z,1509056753.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:53.970Z,1509056753.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:54.353Z,1509056754.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:54.371Z,1509056754.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:54.732Z,1509056754.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:54.765Z,1509056754.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:55.173Z,1509056755.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:55.189Z,1509056755.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:55.537Z,1509056755.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:55.554Z,1509056755.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:55.939Z,1509056755.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:55.956Z,1509056755.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:56.341Z,1509056756.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:56.357Z,1509056756.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:56.742Z,1509056756.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:56.759Z,1509056756.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:57.164Z,1509056757.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:57.197Z,1509056757.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:57.543Z,1509056757.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:57.559Z,1509056757.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:57.943Z,1509056757.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:57.968Z,1509056757.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:58.327Z,1509056758.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:58.356Z,1509056758.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:58.744Z,1509056758.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:58.773Z,1509056758.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:59.154Z,1509056759.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:59.183Z,1509056759.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:59.535Z,1509056759.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:59.563Z,1509056759.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:25:59.943Z,1509056759.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:25:59.981Z,1509056759.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:00.339Z,1509056760.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:00.380Z,1509056760.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:00.734Z,1509056760.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:00.751Z,1509056760.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:01.164Z,1509056761.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:01.196Z,1509056761.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:01.529Z,1509056761.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:01.557Z,1509056761.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:01.940Z,1509056761.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:01.977Z,1509056761.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:02.330Z,1509056762.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:02.363Z,1509056762.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:02.748Z,1509056762.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:02.781Z,1509056762.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:03.136Z,1509056763.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:03.224Z,1509056763.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:03.536Z,1509056763.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:03.564Z,1509056763.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:03.929Z,1509056763.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:03.949Z,1509056763.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:04.337Z,1509056764.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:04.389Z,1509056764.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:04.740Z,1509056764.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:04.756Z,1509056764.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:05.163Z,1509056765.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:05.201Z,1509056765.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:05.534Z,1509056765.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:05.607Z,1509056765.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:05.932Z,1509056765.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:05.976Z,1509056765.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:06.333Z,1509056766.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:06.385Z,1509056766.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:06.733Z,1509056766.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:06.782Z,1509056766.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:07.166Z,1509056767.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:07.182Z,1509056767.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:07.542Z,1509056767.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:07.578Z,1509056767.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:07.936Z,1509056767.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:07.953Z,1509056767.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:08.343Z,1509056768.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:08.359Z,1509056768.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:08.742Z,1509056768.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:08.758Z,1509056768.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:09.158Z,1509056769.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:09.195Z,1509056769.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:09.537Z,1509056769.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:09.566Z,1509056769.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:09.932Z,1509056769.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:09.964Z,1509056769.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:10.334Z,1509056770.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:10.350Z,1509056770.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:10.739Z,1509056770.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:10.755Z,1509056770.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:11.168Z,1509056771.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:11.197Z,1509056771.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:11.528Z,1509056771.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:11.557Z,1509056771.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:11.942Z,1509056771.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:11.958Z,1509056771.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:12.338Z,1509056772.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:12.372Z,1509056772.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:12.738Z,1509056772.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:12.767Z,1509056772.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:13.141Z,1509056773.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:13.186Z,1509056773.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:13.527Z,1509056773.527 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:13.556Z,1509056773.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:13.935Z,1509056773.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:13.975Z,1509056773.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:14.329Z,1509056774.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:14.365Z,1509056774.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:14.743Z,1509056774.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:14.760Z,1509056774.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:15.170Z,1509056775.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:15.209Z,1509056775.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:15.550Z,1509056775.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:15.566Z,1509056775.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:15.931Z,1509056775.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:15.960Z,1509056775.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:16.334Z,1509056776.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:16.370Z,1509056776.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:16.735Z,1509056776.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:16.764Z,1509056776.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:17.150Z,1509056777.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:17.201Z,1509056777.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:17.541Z,1509056777.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:17.558Z,1509056777.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:17.971Z,1509056777.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:18.004Z,1509056778.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:18.339Z,1509056778.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:18.356Z,1509056778.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:18.738Z,1509056778.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:18.813Z,1509056778.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:19.164Z,1509056779.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:19.198Z,1509056779.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:19.548Z,1509056779.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:19.576Z,1509056779.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:19.937Z,1509056779.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:20.004Z,1509056780.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:20.334Z,1509056780.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:20.375Z,1509056780.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:20.731Z,1509056780.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:20.787Z,1509056780.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:21.136Z,1509056781.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:21.215Z,1509056781.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:21.528Z,1509056781.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:21.549Z,1509056781.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:21.933Z,1509056781.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:21.949Z,1509056781.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:22.335Z,1509056782.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:22.364Z,1509056782.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:22.736Z,1509056782.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:22.774Z,1509056782.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:23.154Z,1509056783.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:23.179Z,1509056783.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:23.555Z,1509056783.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:23.590Z,1509056783.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:23.939Z,1509056783.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:23.955Z,1509056783.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:24.341Z,1509056784.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:24.369Z,1509056784.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:24.712Z,1509056784.712 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:26:24.753Z,1509056784.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:24.778Z,1509056784.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:25.154Z,1509056785.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:25.175Z,1509056785.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:25.538Z,1509056785.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:25.624Z,1509056785.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:25.930Z,1509056785.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:25.968Z,1509056785.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:26.339Z,1509056786.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:26.373Z,1509056786.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:26.737Z,1509056786.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:26.759Z,1509056786.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:27.163Z,1509056787.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:27.183Z,1509056787.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:27.549Z,1509056787.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:27.653Z,1509056787.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:27.930Z,1509056787.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:27.959Z,1509056787.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:28.338Z,1509056788.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:28.375Z,1509056788.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:28.735Z,1509056788.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:28.769Z,1509056788.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:29.156Z,1509056789.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:29.196Z,1509056789.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:29.540Z,1509056789.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:29.557Z,1509056789.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:29.936Z,1509056789.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:29.953Z,1509056789.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:30.345Z,1509056790.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:30.362Z,1509056790.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:30.737Z,1509056790.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:30.782Z,1509056790.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:31.148Z,1509056791.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:31.170Z,1509056791.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:31.536Z,1509056791.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:31.576Z,1509056791.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:31.936Z,1509056791.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:31.971Z,1509056791.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:32.333Z,1509056792.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:32.367Z,1509056792.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:32.738Z,1509056792.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:32.763Z,1509056792.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:33.170Z,1509056793.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:33.255Z,1509056793.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:33.550Z,1509056793.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:33.567Z,1509056793.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:33.948Z,1509056793.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:33.965Z,1509056793.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:34.349Z,1509056794.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:34.408Z,1509056794.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:34.733Z,1509056794.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:34.777Z,1509056794.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:35.162Z,1509056795.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:35.210Z,1509056795.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:35.554Z,1509056795.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:35.592Z,1509056795.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:35.946Z,1509056795.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:36.011Z,1509056796.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:36.353Z,1509056796.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:36.382Z,1509056796.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:36.731Z,1509056796.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:36.764Z,1509056796.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:37.159Z,1509056797.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:37.188Z,1509056797.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:37.552Z,1509056797.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:37.589Z,1509056797.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:37.946Z,1509056797.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:37.962Z,1509056797.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:38.345Z,1509056798.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:38.361Z,1509056798.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:38.726Z,1509056798.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:38.765Z,1509056798.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:39.135Z,1509056799.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:39.184Z,1509056799.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:39.536Z,1509056799.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:39.647Z,1509056799.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:39.940Z,1509056799.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:39.956Z,1509056799.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:40.345Z,1509056800.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:40.361Z,1509056800.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:40.741Z,1509056800.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:40.765Z,1509056800.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:41.151Z,1509056801.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:41.171Z,1509056801.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:41.531Z,1509056801.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:41.639Z,1509056801.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:41.939Z,1509056801.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:41.960Z,1509056801.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:42.341Z,1509056802.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:42.357Z,1509056802.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:42.752Z,1509056802.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:42.790Z,1509056802.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:43.161Z,1509056803.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:43.189Z,1509056803.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:43.545Z,1509056803.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:43.561Z,1509056803.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:43.943Z,1509056803.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:43.960Z,1509056803.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:44.327Z,1509056804.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:44.364Z,1509056804.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:44.735Z,1509056804.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:44.769Z,1509056804.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:45.170Z,1509056805.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:45.186Z,1509056805.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:45.541Z,1509056805.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:45.577Z,1509056805.577 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:45.941Z,1509056805.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:45.957Z,1509056805.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:46.335Z,1509056806.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:46.359Z,1509056806.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:46.746Z,1509056806.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:46.780Z,1509056806.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:47.139Z,1509056807.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:47.171Z,1509056807.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:47.560Z,1509056807.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:47.601Z,1509056807.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:47.929Z,1509056807.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:48.021Z,1509056808.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:48.345Z,1509056808.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:48.379Z,1509056808.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:48.743Z,1509056808.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:48.764Z,1509056808.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:49.150Z,1509056809.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:49.193Z,1509056809.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:49.552Z,1509056809.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:49.569Z,1509056809.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:49.932Z,1509056809.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:49.996Z,1509056809.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:50.330Z,1509056810.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:50.386Z,1509056810.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:50.750Z,1509056810.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:50.767Z,1509056810.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:51.144Z,1509056811.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:51.181Z,1509056811.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:51.547Z,1509056811.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:51.591Z,1509056811.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:51.937Z,1509056811.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:51.973Z,1509056811.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:52.346Z,1509056812.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:52.363Z,1509056812.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:52.742Z,1509056812.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:52.764Z,1509056812.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:53.187Z,1509056813.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:53.211Z,1509056813.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:53.543Z,1509056813.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:53.612Z,1509056813.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:54.186Z,1509056814.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:54.219Z,1509056814.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:54.594Z,1509056814.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:54.628Z,1509056814.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:54.986Z,1509056814.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:55.033Z,1509056815.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:55.403Z,1509056815.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:55.427Z,1509056815.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:55.806Z,1509056815.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:55.842Z,1509056815.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:56.204Z,1509056816.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:56.220Z,1509056816.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:56.598Z,1509056816.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:56.623Z,1509056816.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:57.027Z,1509056817.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:57.068Z,1509056817.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:57.404Z,1509056817.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:57.437Z,1509056817.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:57.806Z,1509056817.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:57.823Z,1509056817.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:58.185Z,1509056818.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:58.233Z,1509056818.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:58.595Z,1509056818.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:58.628Z,1509056818.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:59.014Z,1509056819.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:59.059Z,1509056819.059 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:59.064Z,1509056819.064 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 53
2017-10-26T22:26:59.064Z,1509056819.064 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:26:59.082Z,1509056819.082 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:26:59.083Z,1509056819.083 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 53
2017-10-26T22:26:59.083Z,1509056819.083 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:26:59.218Z,1509056819.218 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:26:59.218Z,1509056819.218 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:26:59.404Z,1509056819.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:59.530Z,1509056819.530 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:26:59.530Z,1509056819.530 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 53
2017-10-26T22:26:59.530Z,1509056819.530 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:26:59.531Z,1509056819.531 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 53
2017-10-26T22:26:59.802Z,1509056819.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:26:59.818Z,1509056819.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:26:59.819Z,1509056819.819 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:26:59.819Z,1509056819.819 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:26:59.838Z,1509056819.838 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:26:59.839Z,1509056819.839 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:26:59.839Z,1509056819.839 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:27:00.202Z,1509056820.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:00.225Z,1509056820.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:00.597Z,1509056820.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:00.621Z,1509056820.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:01.026Z,1509056821.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:01.088Z,1509056821.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:01.390Z,1509056821.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:01.428Z,1509056821.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:01.796Z,1509056821.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:01.828Z,1509056821.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:02.194Z,1509056822.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:02.218Z,1509056822.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:02.599Z,1509056822.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:02.673Z,1509056822.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:03.184Z,1509056823.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:03.205Z,1509056823.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:03.590Z,1509056823.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:03.649Z,1509056823.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:03.988Z,1509056823.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:04.011Z,1509056824.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:04.394Z,1509056824.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:04.463Z,1509056824.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:04.787Z,1509056824.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:04.852Z,1509056824.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:05.189Z,1509056825.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:05.302Z,1509056825.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:05.602Z,1509056825.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:05.626Z,1509056825.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:05.984Z,1509056825.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:06.005Z,1509056826.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:06.392Z,1509056826.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:06.413Z,1509056826.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:06.790Z,1509056826.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:06.807Z,1509056826.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:07.195Z,1509056827.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:07.212Z,1509056827.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:07.603Z,1509056827.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:07.665Z,1509056827.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:07.982Z,1509056827.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:07.998Z,1509056827.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:08.389Z,1509056828.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:08.404Z,1509056828.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:08.792Z,1509056828.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:08.810Z,1509056828.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:09.196Z,1509056829.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:09.224Z,1509056829.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:09.622Z,1509056829.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:09.670Z,1509056829.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:09.982Z,1509056829.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:09.998Z,1509056829.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:10.379Z,1509056830.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:10.395Z,1509056830.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:10.786Z,1509056830.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:10.803Z,1509056830.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:11.196Z,1509056831.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:11.212Z,1509056831.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:11.578Z,1509056831.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:11.616Z,1509056831.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:11.993Z,1509056831.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:12.022Z,1509056832.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:12.381Z,1509056832.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:12.406Z,1509056832.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:12.782Z,1509056832.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:12.798Z,1509056832.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:13.232Z,1509056833.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:13.261Z,1509056833.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:13.582Z,1509056833.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:13.616Z,1509056833.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:13.986Z,1509056833.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:14.017Z,1509056834.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:14.379Z,1509056834.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:14.408Z,1509056834.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:14.781Z,1509056834.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:14.798Z,1509056834.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:15.198Z,1509056835.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:15.236Z,1509056835.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:15.590Z,1509056835.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:15.607Z,1509056835.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:15.984Z,1509056835.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:16.006Z,1509056836.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:16.391Z,1509056836.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:16.409Z,1509056836.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:16.777Z,1509056836.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:16.842Z,1509056836.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:17.174Z,1509056837.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:17.225Z,1509056837.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:17.582Z,1509056837.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:17.598Z,1509056837.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:17.984Z,1509056837.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:18.000Z,1509056838.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:18.383Z,1509056838.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:18.428Z,1509056838.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:19.007Z,1509056839.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:19.051Z,1509056839.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:19.351Z,1509056839.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:19.414Z,1509056839.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:19.748Z,1509056839.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:19.771Z,1509056839.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:20.157Z,1509056840.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:20.220Z,1509056840.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:20.572Z,1509056840.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:20.629Z,1509056840.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:21.018Z,1509056841.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:21.072Z,1509056841.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:21.356Z,1509056841.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:21.401Z,1509056841.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:21.735Z,1509056841.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:21.778Z,1509056841.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:22.155Z,1509056842.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:22.209Z,1509056842.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:22.546Z,1509056842.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:22.564Z,1509056842.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:22.944Z,1509056842.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:22.960Z,1509056842.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:23.354Z,1509056843.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:23.416Z,1509056843.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:23.740Z,1509056843.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:23.779Z,1509056843.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:24.165Z,1509056844.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:24.195Z,1509056844.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:24.544Z,1509056844.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:24.569Z,1509056844.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:24.913Z,1509056844.913 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:27:24.934Z,1509056844.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:24.975Z,1509056844.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:25.345Z,1509056845.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:25.418Z,1509056845.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:25.741Z,1509056845.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:25.774Z,1509056845.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:26.159Z,1509056846.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:26.192Z,1509056846.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:26.549Z,1509056846.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:26.568Z,1509056846.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:26.948Z,1509056846.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:26.964Z,1509056846.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:27.347Z,1509056847.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:27.376Z,1509056847.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:27.762Z,1509056847.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:27.788Z,1509056847.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:28.173Z,1509056848.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:28.198Z,1509056848.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:28.544Z,1509056848.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:28.592Z,1509056848.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:28.955Z,1509056848.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:28.985Z,1509056848.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:29.353Z,1509056849.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:29.371Z,1509056849.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:29.750Z,1509056849.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:29.780Z,1509056849.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:30.165Z,1509056850.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:30.186Z,1509056850.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:30.539Z,1509056850.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:30.596Z,1509056850.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:30.996Z,1509056850.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:31.025Z,1509056851.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:31.337Z,1509056851.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:31.388Z,1509056851.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:31.749Z,1509056851.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:31.766Z,1509056851.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:32.162Z,1509056852.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:32.228Z,1509056852.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:32.557Z,1509056852.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:32.607Z,1509056852.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:33.014Z,1509056853.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:33.042Z,1509056853.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:33.330Z,1509056853.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:33.369Z,1509056853.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:33.745Z,1509056853.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:33.775Z,1509056853.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:34.154Z,1509056854.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:34.191Z,1509056854.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:34.534Z,1509056854.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:34.602Z,1509056854.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:34.954Z,1509056854.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:35.006Z,1509056855.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:35.350Z,1509056855.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:35.358Z,1509056855.358 [BPC1](ERROR): Failed to receive battery data
2017-10-26T22:27:35.358Z,1509056855.358 [BPC1] Communications Fault, FailCount= 1
2017-10-26T22:27:35.358Z,1509056855.358 [BPC1](ERROR): Communications Fault
2017-10-26T22:27:35.400Z,1509056855.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:35.470Z,1509056855.470 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T22:27:35.756Z,1509056855.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:35.799Z,1509056855.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:36.161Z,1509056856.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:36.196Z,1509056856.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:36.541Z,1509056856.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:36.590Z,1509056856.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:36.711Z,1509056856.711 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:27:36.711Z,1509056856.711 [BPC1] No Fault, FailCount= 1
2017-10-26T22:27:37.015Z,1509056857.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:37.152Z,1509056857.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:37.341Z,1509056857.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:37.394Z,1509056857.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:37.737Z,1509056857.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:37.775Z,1509056857.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:38.164Z,1509056858.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:38.220Z,1509056858.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:38.547Z,1509056858.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:38.563Z,1509056858.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:38.958Z,1509056858.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:38.976Z,1509056858.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:39.358Z,1509056859.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:39.409Z,1509056859.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:39.740Z,1509056859.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:39.790Z,1509056859.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:40.168Z,1509056860.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:40.187Z,1509056860.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:40.548Z,1509056860.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:40.583Z,1509056860.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:40.960Z,1509056860.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:41.002Z,1509056861.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:41.367Z,1509056861.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:41.415Z,1509056861.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:41.755Z,1509056861.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:41.779Z,1509056861.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:42.165Z,1509056862.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:42.208Z,1509056862.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:42.555Z,1509056862.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:42.599Z,1509056862.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:42.971Z,1509056862.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:43.017Z,1509056863.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:43.354Z,1509056863.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:43.370Z,1509056863.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:43.754Z,1509056863.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:43.803Z,1509056863.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:44.159Z,1509056864.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:44.196Z,1509056864.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:44.537Z,1509056864.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:44.575Z,1509056864.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:44.968Z,1509056864.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:45.008Z,1509056865.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:45.337Z,1509056865.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:45.367Z,1509056865.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:45.737Z,1509056865.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:45.775Z,1509056865.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:46.156Z,1509056866.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:46.191Z,1509056866.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:46.537Z,1509056866.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:46.553Z,1509056866.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:46.996Z,1509056866.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:47.032Z,1509056867.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:47.340Z,1509056867.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:47.422Z,1509056867.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:47.746Z,1509056867.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:47.762Z,1509056867.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:48.171Z,1509056868.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:48.207Z,1509056868.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:48.541Z,1509056868.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:48.586Z,1509056868.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:48.979Z,1509056868.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:49.043Z,1509056869.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:49.335Z,1509056869.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:49.390Z,1509056869.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:49.738Z,1509056869.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:49.758Z,1509056869.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:50.166Z,1509056870.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:50.197Z,1509056870.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:50.555Z,1509056870.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:50.619Z,1509056870.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:51.008Z,1509056871.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:51.049Z,1509056871.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:51.338Z,1509056871.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:51.408Z,1509056871.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:51.736Z,1509056871.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:51.790Z,1509056871.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:52.175Z,1509056872.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:52.192Z,1509056872.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:52.538Z,1509056872.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:52.580Z,1509056872.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:52.958Z,1509056872.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:53.012Z,1509056873.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:53.358Z,1509056873.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:53.389Z,1509056873.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:53.760Z,1509056873.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:53.806Z,1509056873.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:54.160Z,1509056874.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:54.190Z,1509056874.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:54.546Z,1509056874.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:54.569Z,1509056874.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:54.988Z,1509056874.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:55.047Z,1509056875.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:55.351Z,1509056875.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:55.390Z,1509056875.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:55.750Z,1509056875.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:55.766Z,1509056875.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:56.173Z,1509056876.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:56.205Z,1509056876.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:56.549Z,1509056876.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:56.596Z,1509056876.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:56.994Z,1509056876.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:57.044Z,1509056877.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:57.346Z,1509056877.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:57.406Z,1509056877.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:57.755Z,1509056877.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:57.772Z,1509056877.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:58.167Z,1509056878.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:58.205Z,1509056878.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:58.537Z,1509056878.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:58.578Z,1509056878.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:58.995Z,1509056878.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:59.064Z,1509056879.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:59.340Z,1509056879.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:59.411Z,1509056879.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:27:59.737Z,1509056879.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:27:59.754Z,1509056879.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:00.168Z,1509056880.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:00.199Z,1509056880.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:00.551Z,1509056880.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:00.591Z,1509056880.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:01.009Z,1509056881.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:01.077Z,1509056881.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:01.342Z,1509056881.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:01.392Z,1509056881.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:01.881Z,1509056881.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:01.905Z,1509056881.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:02.284Z,1509056882.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:02.352Z,1509056882.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:02.684Z,1509056882.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:02.700Z,1509056882.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:03.096Z,1509056883.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:03.146Z,1509056883.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:03.493Z,1509056883.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:03.547Z,1509056883.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:03.874Z,1509056883.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:03.928Z,1509056883.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:04.286Z,1509056884.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:04.310Z,1509056884.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:04.681Z,1509056884.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:04.734Z,1509056884.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:05.091Z,1509056885.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:05.167Z,1509056885.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:05.485Z,1509056885.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:05.538Z,1509056885.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:05.884Z,1509056885.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:05.938Z,1509056885.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:06.289Z,1509056886.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:06.306Z,1509056886.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:06.685Z,1509056886.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:06.701Z,1509056886.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:07.092Z,1509056887.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:07.147Z,1509056887.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:07.476Z,1509056887.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:07.506Z,1509056887.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:07.891Z,1509056887.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:07.908Z,1509056887.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:08.277Z,1509056888.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:08.310Z,1509056888.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:08.680Z,1509056888.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:08.712Z,1509056888.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:09.075Z,1509056889.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:09.148Z,1509056889.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:09.479Z,1509056889.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:09.526Z,1509056889.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:09.880Z,1509056889.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:09.901Z,1509056889.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:10.292Z,1509056890.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:10.328Z,1509056890.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:10.690Z,1509056890.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:10.706Z,1509056890.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:11.088Z,1509056891.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:11.104Z,1509056891.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:11.486Z,1509056891.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:11.506Z,1509056891.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:11.880Z,1509056891.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:11.909Z,1509056891.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:12.281Z,1509056892.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:12.314Z,1509056892.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:12.687Z,1509056892.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:12.703Z,1509056892.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:13.086Z,1509056893.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:13.103Z,1509056893.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:13.481Z,1509056893.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:13.505Z,1509056893.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:13.886Z,1509056893.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:13.902Z,1509056893.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:14.286Z,1509056894.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:14.326Z,1509056894.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:14.683Z,1509056894.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:14.699Z,1509056894.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:15.089Z,1509056895.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:15.105Z,1509056895.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:15.485Z,1509056895.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:15.508Z,1509056895.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:15.877Z,1509056895.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:15.905Z,1509056895.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:16.301Z,1509056896.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:16.343Z,1509056896.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:16.679Z,1509056896.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:16.740Z,1509056896.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:17.082Z,1509056897.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:17.123Z,1509056897.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:17.486Z,1509056897.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:17.524Z,1509056897.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:17.878Z,1509056897.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:17.895Z,1509056897.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:18.280Z,1509056898.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:18.356Z,1509056898.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:18.899Z,1509056898.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:19.007Z,1509056899.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:19.305Z,1509056899.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:19.362Z,1509056899.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:19.718Z,1509056899.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:19.761Z,1509056899.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:20.110Z,1509056900.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:20.161Z,1509056900.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:20.512Z,1509056900.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:20.573Z,1509056900.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:20.944Z,1509056900.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:21.041Z,1509056901.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:21.306Z,1509056901.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:21.334Z,1509056901.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:21.702Z,1509056901.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:21.732Z,1509056901.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:22.100Z,1509056902.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:22.153Z,1509056902.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:22.515Z,1509056902.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:22.532Z,1509056902.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:22.947Z,1509056902.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:22.983Z,1509056902.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:23.313Z,1509056903.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:23.419Z,1509056903.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:23.705Z,1509056903.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:23.737Z,1509056903.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:24.099Z,1509056904.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:24.145Z,1509056904.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:24.503Z,1509056904.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:24.535Z,1509056904.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:24.919Z,1509056904.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:25.028Z,1509056905.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:25.275Z,1509056905.275 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:28:25.319Z,1509056905.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:25.361Z,1509056905.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:25.700Z,1509056905.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:25.736Z,1509056905.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:26.097Z,1509056906.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:26.154Z,1509056906.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:26.502Z,1509056906.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:26.550Z,1509056906.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:26.921Z,1509056906.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:27.009Z,1509056907.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:27.306Z,1509056907.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:27.356Z,1509056907.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:27.703Z,1509056907.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:27.731Z,1509056907.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:28.098Z,1509056908.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:28.162Z,1509056908.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:28.501Z,1509056908.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:28.557Z,1509056908.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:28.914Z,1509056908.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:29.017Z,1509056909.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:29.305Z,1509056909.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:29.355Z,1509056909.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:29.704Z,1509056909.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:29.734Z,1509056909.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:30.121Z,1509056910.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:30.164Z,1509056910.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:30.512Z,1509056910.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:30.530Z,1509056910.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:30.896Z,1509056910.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:31.007Z,1509056911.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:31.304Z,1509056911.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:31.324Z,1509056911.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:31.700Z,1509056911.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:31.758Z,1509056911.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:32.138Z,1509056912.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:32.180Z,1509056912.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:32.504Z,1509056912.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:32.538Z,1509056912.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:32.951Z,1509056912.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:33.029Z,1509056913.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:33.303Z,1509056913.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:33.325Z,1509056913.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:33.712Z,1509056913.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:33.794Z,1509056913.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:34.105Z,1509056914.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:34.160Z,1509056914.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:34.505Z,1509056914.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:34.559Z,1509056914.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:34.900Z,1509056914.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:35.028Z,1509056915.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:35.303Z,1509056915.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:35.328Z,1509056915.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:35.723Z,1509056915.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:35.752Z,1509056915.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:36.112Z,1509056916.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:36.165Z,1509056916.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:36.631Z,1509056916.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:36.664Z,1509056916.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:37.050Z,1509056917.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:37.082Z,1509056917.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:37.439Z,1509056917.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:37.456Z,1509056917.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:37.832Z,1509056917.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:37.852Z,1509056917.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:38.232Z,1509056918.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:38.273Z,1509056918.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:38.630Z,1509056918.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:38.647Z,1509056918.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:39.035Z,1509056919.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:39.051Z,1509056919.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:39.426Z,1509056919.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:39.455Z,1509056919.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:39.838Z,1509056919.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:39.855Z,1509056919.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:40.238Z,1509056920.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:40.254Z,1509056920.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:40.644Z,1509056920.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:40.661Z,1509056920.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:41.044Z,1509056921.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:41.060Z,1509056921.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:41.431Z,1509056921.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:41.454Z,1509056921.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:41.840Z,1509056921.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:41.879Z,1509056921.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:42.249Z,1509056922.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:42.277Z,1509056922.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:42.635Z,1509056922.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:42.663Z,1509056922.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:43.039Z,1509056923.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:43.060Z,1509056923.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:43.428Z,1509056923.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:43.461Z,1509056923.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:43.851Z,1509056923.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:43.872Z,1509056923.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:44.234Z,1509056924.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:44.267Z,1509056924.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:44.630Z,1509056924.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:44.662Z,1509056924.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:45.039Z,1509056925.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:45.078Z,1509056925.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:45.435Z,1509056925.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:45.467Z,1509056925.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:45.830Z,1509056925.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:45.911Z,1509056925.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:46.240Z,1509056926.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:46.257Z,1509056926.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:46.634Z,1509056926.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:46.650Z,1509056926.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:47.054Z,1509056927.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:47.091Z,1509056927.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:47.423Z,1509056927.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:47.451Z,1509056927.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:47.836Z,1509056927.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:47.875Z,1509056927.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:48.234Z,1509056928.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:48.284Z,1509056928.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:48.630Z,1509056928.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:48.646Z,1509056928.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:49.040Z,1509056929.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:49.093Z,1509056929.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:49.431Z,1509056929.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:49.549Z,1509056929.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:49.843Z,1509056929.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:49.860Z,1509056929.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:50.239Z,1509056930.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:50.255Z,1509056930.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:50.641Z,1509056930.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:50.657Z,1509056930.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:51.033Z,1509056931.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:51.063Z,1509056931.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:51.424Z,1509056931.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:51.441Z,1509056931.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:51.835Z,1509056931.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:51.867Z,1509056931.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:52.237Z,1509056932.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:52.252Z,1509056932.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:52.635Z,1509056932.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:52.651Z,1509056932.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:53.037Z,1509056933.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:53.084Z,1509056933.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:53.433Z,1509056933.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:53.463Z,1509056933.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:53.832Z,1509056933.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:53.863Z,1509056933.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:54.236Z,1509056934.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:54.264Z,1509056934.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:54.639Z,1509056934.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:54.665Z,1509056934.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:55.043Z,1509056935.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:55.085Z,1509056935.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:55.435Z,1509056935.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:55.455Z,1509056935.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:55.841Z,1509056935.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:55.858Z,1509056935.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:56.236Z,1509056936.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:56.257Z,1509056936.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:56.646Z,1509056936.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:56.662Z,1509056936.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:57.027Z,1509056937.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:57.089Z,1509056937.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:57.435Z,1509056937.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:57.460Z,1509056937.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:57.838Z,1509056937.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:57.859Z,1509056937.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:58.240Z,1509056938.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:58.256Z,1509056938.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:58.634Z,1509056938.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:58.651Z,1509056938.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:59.039Z,1509056939.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:59.056Z,1509056939.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:59.434Z,1509056939.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:59.459Z,1509056939.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:28:59.838Z,1509056939.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:28:59.859Z,1509056939.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:00.227Z,1509056940.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:00.287Z,1509056940.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:00.639Z,1509056940.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:00.656Z,1509056940.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:01.045Z,1509056941.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:01.062Z,1509056941.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:01.440Z,1509056941.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:01.501Z,1509056941.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:01.832Z,1509056941.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:01.854Z,1509056941.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:02.234Z,1509056942.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:02.258Z,1509056942.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:02.640Z,1509056942.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:02.694Z,1509056942.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:03.036Z,1509056943.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:03.051Z,1509056943.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:03.435Z,1509056943.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:03.502Z,1509056943.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:03.832Z,1509056943.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:03.885Z,1509056943.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:04.233Z,1509056944.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:04.263Z,1509056944.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:04.635Z,1509056944.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:04.664Z,1509056944.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:05.038Z,1509056945.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:05.069Z,1509056945.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:05.431Z,1509056945.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:05.463Z,1509056945.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:05.833Z,1509056945.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:05.849Z,1509056945.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:06.243Z,1509056946.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:06.259Z,1509056946.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:06.641Z,1509056946.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:06.657Z,1509056946.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:07.036Z,1509056947.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:07.069Z,1509056947.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:07.429Z,1509056947.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:07.471Z,1509056947.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:07.838Z,1509056947.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:07.855Z,1509056947.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:08.241Z,1509056948.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:08.278Z,1509056948.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:08.635Z,1509056948.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:08.664Z,1509056948.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:09.047Z,1509056949.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:09.064Z,1509056949.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:09.447Z,1509056949.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:09.463Z,1509056949.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:09.829Z,1509056949.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:09.863Z,1509056949.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:10.234Z,1509056950.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:10.273Z,1509056950.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:10.627Z,1509056950.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:10.659Z,1509056950.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:11.034Z,1509056951.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:11.054Z,1509056951.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:11.437Z,1509056951.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:11.466Z,1509056951.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:11.841Z,1509056951.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:11.857Z,1509056951.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:12.242Z,1509056952.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:12.259Z,1509056952.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:12.651Z,1509056952.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:12.676Z,1509056952.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:13.027Z,1509056953.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:13.076Z,1509056953.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:13.431Z,1509056953.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:13.448Z,1509056953.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:13.831Z,1509056953.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:13.847Z,1509056953.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:14.234Z,1509056954.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:14.251Z,1509056954.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:14.633Z,1509056954.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:14.691Z,1509056954.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:15.056Z,1509056955.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:15.098Z,1509056955.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:15.438Z,1509056955.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:15.475Z,1509056955.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:15.830Z,1509056955.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:15.891Z,1509056955.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:16.229Z,1509056956.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:16.246Z,1509056956.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:16.635Z,1509056956.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:16.690Z,1509056956.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:17.030Z,1509056957.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:17.059Z,1509056957.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:17.443Z,1509056957.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:17.498Z,1509056957.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:17.837Z,1509056957.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:17.894Z,1509056957.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:18.232Z,1509056958.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:18.248Z,1509056958.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:18.629Z,1509056958.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:18.657Z,1509056958.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:19.036Z,1509056959.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:19.056Z,1509056959.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:19.458Z,1509056959.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:19.499Z,1509056959.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:19.826Z,1509056959.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:19.859Z,1509056959.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:20.235Z,1509056960.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:20.272Z,1509056960.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:20.642Z,1509056960.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:20.670Z,1509056960.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:21.032Z,1509056961.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:21.049Z,1509056961.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:21.440Z,1509056961.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:21.461Z,1509056961.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:21.840Z,1509056961.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:21.856Z,1509056961.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:22.237Z,1509056962.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:22.253Z,1509056962.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:22.644Z,1509056962.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:22.661Z,1509056962.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:23.030Z,1509056963.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:23.058Z,1509056963.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:23.422Z,1509056963.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:23.439Z,1509056963.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:23.834Z,1509056963.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:23.867Z,1509056963.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:24.231Z,1509056964.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:24.272Z,1509056964.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:24.633Z,1509056964.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:24.649Z,1509056964.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:25.038Z,1509056965.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:25.077Z,1509056965.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:25.408Z,1509056965.408 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:29:25.444Z,1509056965.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:25.462Z,1509056965.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:25.842Z,1509056965.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:25.859Z,1509056965.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:26.245Z,1509056966.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:26.262Z,1509056966.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:26.640Z,1509056966.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:26.663Z,1509056966.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:27.042Z,1509056967.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:27.058Z,1509056967.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:27.429Z,1509056967.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:27.461Z,1509056967.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:27.829Z,1509056967.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:27.845Z,1509056967.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:28.237Z,1509056968.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:28.254Z,1509056968.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:28.638Z,1509056968.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:28.703Z,1509056968.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:29.030Z,1509056969.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:29.051Z,1509056969.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:29.428Z,1509056969.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:29.452Z,1509056969.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:29.842Z,1509056969.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:29.904Z,1509056969.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:30.242Z,1509056970.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:30.259Z,1509056970.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:30.630Z,1509056970.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:30.668Z,1509056970.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:31.032Z,1509056971.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:31.097Z,1509056971.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:31.434Z,1509056971.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:31.465Z,1509056971.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:31.843Z,1509056971.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:31.916Z,1509056971.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:32.229Z,1509056972.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:32.280Z,1509056972.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:32.636Z,1509056972.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:32.677Z,1509056972.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:33.037Z,1509056973.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:33.077Z,1509056973.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:33.436Z,1509056973.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:33.453Z,1509056973.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:33.838Z,1509056973.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:33.854Z,1509056973.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:34.241Z,1509056974.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:34.257Z,1509056974.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:34.640Z,1509056974.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:34.656Z,1509056974.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:35.042Z,1509056975.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:35.057Z,1509056975.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:35.430Z,1509056975.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:35.459Z,1509056975.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:35.830Z,1509056975.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:35.860Z,1509056975.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:36.234Z,1509056976.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:36.261Z,1509056976.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:36.632Z,1509056976.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:36.662Z,1509056976.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:37.030Z,1509056977.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:37.066Z,1509056977.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:37.078Z,1509056977.078 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:G.Wait] Running Loop=1
2017-10-26T22:29:37.079Z,1509056977.079 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:G.Wait](DEBUG): Initialize Wait Component.
2017-10-26T22:29:37.432Z,1509056977.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:37.448Z,1509056977.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:37.840Z,1509056977.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:37.871Z,1509056977.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:38.238Z,1509056978.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:38.263Z,1509056978.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:38.637Z,1509056978.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:38.666Z,1509056978.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:39.048Z,1509056979.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:39.093Z,1509056979.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:39.432Z,1509056979.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:39.473Z,1509056979.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:39.854Z,1509056979.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:39.876Z,1509056979.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:40.232Z,1509056980.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:40.248Z,1509056980.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:40.636Z,1509056980.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:40.652Z,1509056980.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:41.040Z,1509056981.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:41.057Z,1509056981.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:41.442Z,1509056981.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:41.458Z,1509056981.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:41.840Z,1509056981.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:41.861Z,1509056981.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:42.223Z,1509056982.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:42.262Z,1509056982.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:42.632Z,1509056982.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:42.661Z,1509056982.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:43.035Z,1509056983.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:43.076Z,1509056983.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:43.442Z,1509056983.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:43.495Z,1509056983.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:43.840Z,1509056983.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:43.857Z,1509056983.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:44.241Z,1509056984.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:44.275Z,1509056984.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:44.629Z,1509056984.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:44.684Z,1509056984.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:45.025Z,1509056985.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:45.085Z,1509056985.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:45.433Z,1509056985.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:45.465Z,1509056985.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:45.831Z,1509056985.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:45.881Z,1509056985.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:46.240Z,1509056986.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:46.280Z,1509056986.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:46.632Z,1509056986.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:46.687Z,1509056986.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:47.033Z,1509056987.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:47.098Z,1509056987.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:47.435Z,1509056987.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:47.452Z,1509056987.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:47.834Z,1509056987.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:47.850Z,1509056987.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:48.236Z,1509056988.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:48.252Z,1509056988.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:48.636Z,1509056988.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:48.652Z,1509056988.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:49.193Z,1509056989.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:49.209Z,1509056989.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:49.606Z,1509056989.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:49.622Z,1509056989.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:50.006Z,1509056990.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:50.028Z,1509056990.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:50.429Z,1509056990.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:50.466Z,1509056990.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:50.781Z,1509056990.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:50.797Z,1509056990.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:51.201Z,1509056991.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:51.230Z,1509056991.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:51.632Z,1509056991.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:51.659Z,1509056991.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:52.019Z,1509056992.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:52.076Z,1509056992.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:52.395Z,1509056992.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:52.420Z,1509056992.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:52.790Z,1509056992.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:52.807Z,1509056992.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:53.201Z,1509056993.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:53.308Z,1509056993.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:53.590Z,1509056993.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:53.630Z,1509056993.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:53.986Z,1509056993.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:54.022Z,1509056994.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:54.396Z,1509056994.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:54.423Z,1509056994.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:54.796Z,1509056994.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:54.812Z,1509056994.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:55.192Z,1509056995.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:55.209Z,1509056995.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:55.629Z,1509056995.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:55.666Z,1509056995.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:55.994Z,1509056995.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:56.022Z,1509056996.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:56.384Z,1509056996.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:56.412Z,1509056996.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:56.801Z,1509056996.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:56.819Z,1509056996.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:57.201Z,1509056997.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:57.217Z,1509056997.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:57.659Z,1509056997.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:57.675Z,1509056997.675 [BPC1](ERROR): Failed to parse message.
2017-10-26T22:29:57.676Z,1509056997.676 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T22:29:57.676Z,1509056997.676 [BPC1] Data Fault, FailCount= 1
2017-10-26T22:29:57.676Z,1509056997.676 [BPC1](ERROR): Data Fault
2017-10-26T22:29:57.694Z,1509056997.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:57.838Z,1509056997.838 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T22:29:57.991Z,1509056997.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:58.008Z,1509056998.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:58.401Z,1509056998.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:58.418Z,1509056998.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:58.792Z,1509056998.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:58.809Z,1509056998.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:59.238Z,1509056999.238 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:29:59.238Z,1509056999.238 [BPC1] No Fault, FailCount= 1
2017-10-26T22:29:59.271Z,1509056999.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:59.383Z,1509056999.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:29:59.676Z,1509056999.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:29:59.712Z,1509056999.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:00.084Z,1509057000.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:00.172Z,1509057000.172 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:00.172Z,1509057000.172 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 54
2017-10-26T22:30:00.177Z,1509057000.177 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:30:00.183Z,1509057000.183 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:00.183Z,1509057000.183 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 54
2017-10-26T22:30:00.183Z,1509057000.183 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:30:00.331Z,1509057000.331 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:30:00.331Z,1509057000.331 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:30:00.487Z,1509057000.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:00.655Z,1509057000.655 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:30:00.655Z,1509057000.655 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 54
2017-10-26T22:30:00.655Z,1509057000.655 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:30:00.655Z,1509057000.655 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 54
2017-10-26T22:30:00.886Z,1509057000.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:00.901Z,1509057000.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:30:00.902Z,1509057000.902 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:30:00.902Z,1509057000.902 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:30:00.935Z,1509057000.935 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:30:00.937Z,1509057000.937 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:30:00.947Z,1509057000.947 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:30:01.277Z,1509057001.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:01.321Z,1509057001.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:01.675Z,1509057001.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:01.692Z,1509057001.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:02.086Z,1509057002.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:02.133Z,1509057002.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:02.483Z,1509057002.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:02.508Z,1509057002.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:02.887Z,1509057002.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:02.903Z,1509057002.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:03.288Z,1509057003.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:03.340Z,1509057003.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:03.682Z,1509057003.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:03.699Z,1509057003.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:04.082Z,1509057004.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:04.098Z,1509057004.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:04.491Z,1509057004.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:04.507Z,1509057004.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:04.874Z,1509057004.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:04.912Z,1509057004.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:05.282Z,1509057005.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:05.314Z,1509057005.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:05.684Z,1509057005.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:05.721Z,1509057005.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:06.081Z,1509057006.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:06.129Z,1509057006.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:06.481Z,1509057006.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:06.497Z,1509057006.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:06.883Z,1509057006.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:06.900Z,1509057006.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:07.309Z,1509057007.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:07.356Z,1509057007.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:07.677Z,1509057007.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:07.710Z,1509057007.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:08.079Z,1509057008.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:08.147Z,1509057008.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:08.478Z,1509057008.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:08.494Z,1509057008.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:08.878Z,1509057008.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:08.894Z,1509057008.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:09.284Z,1509057009.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:09.305Z,1509057009.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:09.695Z,1509057009.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:09.714Z,1509057009.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:10.086Z,1509057010.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:10.103Z,1509057010.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:10.494Z,1509057010.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:10.511Z,1509057010.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:10.880Z,1509057010.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:10.918Z,1509057010.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:11.278Z,1509057011.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:11.323Z,1509057011.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:11.704Z,1509057011.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:11.735Z,1509057011.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:12.089Z,1509057012.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:12.171Z,1509057012.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:12.476Z,1509057012.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:12.540Z,1509057012.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:12.877Z,1509057012.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:12.977Z,1509057012.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:13.283Z,1509057013.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:13.332Z,1509057013.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:13.834Z,1509057013.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:13.850Z,1509057013.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:14.231Z,1509057014.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:14.289Z,1509057014.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:14.633Z,1509057014.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:14.694Z,1509057014.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:15.038Z,1509057015.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:15.060Z,1509057015.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:15.434Z,1509057015.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:15.477Z,1509057015.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:15.846Z,1509057015.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:15.862Z,1509057015.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:16.224Z,1509057016.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:16.256Z,1509057016.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:16.669Z,1509057016.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:16.703Z,1509057016.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:17.029Z,1509057017.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:17.062Z,1509057017.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:17.428Z,1509057017.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:17.446Z,1509057017.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:17.830Z,1509057017.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:17.846Z,1509057017.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:18.233Z,1509057018.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:18.249Z,1509057018.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:18.638Z,1509057018.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:18.654Z,1509057018.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:19.020Z,1509057019.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:19.048Z,1509057019.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:19.421Z,1509057019.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:19.449Z,1509057019.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:19.837Z,1509057019.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:19.860Z,1509057019.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:20.235Z,1509057020.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:20.264Z,1509057020.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:20.628Z,1509057020.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:20.660Z,1509057020.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:21.028Z,1509057021.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:21.044Z,1509057021.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:21.439Z,1509057021.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:21.460Z,1509057021.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:21.837Z,1509057021.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:21.853Z,1509057021.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:22.236Z,1509057022.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:22.257Z,1509057022.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:22.649Z,1509057022.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:22.666Z,1509057022.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:23.039Z,1509057023.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:23.117Z,1509057023.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:23.427Z,1509057023.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:23.448Z,1509057023.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:23.831Z,1509057023.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:23.848Z,1509057023.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:24.230Z,1509057024.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:24.253Z,1509057024.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:24.642Z,1509057024.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:24.679Z,1509057024.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:25.046Z,1509057025.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:25.083Z,1509057025.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:25.405Z,1509057025.405 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:30:25.425Z,1509057025.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:25.465Z,1509057025.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:25.830Z,1509057025.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:25.854Z,1509057025.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:26.232Z,1509057026.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:26.248Z,1509057026.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:26.632Z,1509057026.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:26.708Z,1509057026.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:27.028Z,1509057027.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:27.090Z,1509057027.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:27.430Z,1509057027.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:27.450Z,1509057027.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:27.833Z,1509057027.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:27.849Z,1509057027.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:28.239Z,1509057028.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:28.284Z,1509057028.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:28.633Z,1509057028.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:28.650Z,1509057028.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:29.045Z,1509057029.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:29.097Z,1509057029.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:29.433Z,1509057029.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:29.464Z,1509057029.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:29.839Z,1509057029.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:29.897Z,1509057029.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:30.240Z,1509057030.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:30.256Z,1509057030.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:30.637Z,1509057030.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:30.653Z,1509057030.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:31.026Z,1509057031.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:31.060Z,1509057031.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:31.430Z,1509057031.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:31.466Z,1509057031.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:31.838Z,1509057031.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:31.863Z,1509057031.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:32.237Z,1509057032.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:32.261Z,1509057032.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:32.630Z,1509057032.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:32.646Z,1509057032.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:33.037Z,1509057033.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:33.053Z,1509057033.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:33.428Z,1509057033.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:33.444Z,1509057033.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:33.828Z,1509057033.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:33.878Z,1509057033.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:34.228Z,1509057034.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:34.258Z,1509057034.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:34.629Z,1509057034.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:34.657Z,1509057034.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:35.026Z,1509057035.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:35.066Z,1509057035.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:35.430Z,1509057035.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:35.452Z,1509057035.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:35.840Z,1509057035.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:35.884Z,1509057035.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:36.234Z,1509057036.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:36.250Z,1509057036.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:36.630Z,1509057036.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:36.645Z,1509057036.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:37.029Z,1509057037.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:37.053Z,1509057037.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:37.425Z,1509057037.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:37.467Z,1509057037.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:37.819Z,1509057037.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:37.862Z,1509057037.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:38.229Z,1509057038.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:38.247Z,1509057038.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:38.632Z,1509057038.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:38.649Z,1509057038.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:39.031Z,1509057039.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:39.047Z,1509057039.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:39.434Z,1509057039.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:39.451Z,1509057039.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:39.835Z,1509057039.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:39.910Z,1509057039.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:40.241Z,1509057040.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:40.257Z,1509057040.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:40.650Z,1509057040.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:40.692Z,1509057040.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:41.046Z,1509057041.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:41.062Z,1509057041.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:41.435Z,1509057041.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:41.463Z,1509057041.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:41.835Z,1509057041.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:41.909Z,1509057041.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:42.235Z,1509057042.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:42.251Z,1509057042.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:42.637Z,1509057042.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:42.653Z,1509057042.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:43.037Z,1509057043.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:43.104Z,1509057043.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:43.430Z,1509057043.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:43.447Z,1509057043.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:43.834Z,1509057043.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:43.880Z,1509057043.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:44.235Z,1509057044.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:44.292Z,1509057044.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:44.630Z,1509057044.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:44.652Z,1509057044.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:45.039Z,1509057045.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:45.093Z,1509057045.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:45.436Z,1509057045.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:45.453Z,1509057045.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:45.832Z,1509057045.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:45.849Z,1509057045.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:46.239Z,1509057046.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:46.275Z,1509057046.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:46.621Z,1509057046.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:46.652Z,1509057046.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:47.055Z,1509057047.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:47.076Z,1509057047.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:47.434Z,1509057047.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:47.469Z,1509057047.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:47.831Z,1509057047.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:47.847Z,1509057047.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:48.223Z,1509057048.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:48.241Z,1509057048.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:48.630Z,1509057048.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:48.659Z,1509057048.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:49.051Z,1509057049.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:49.093Z,1509057049.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:49.421Z,1509057049.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:49.457Z,1509057049.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:49.828Z,1509057049.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:49.856Z,1509057049.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:50.227Z,1509057050.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:50.259Z,1509057050.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:50.629Z,1509057050.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:50.676Z,1509057050.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:51.029Z,1509057051.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:51.045Z,1509057051.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:51.434Z,1509057051.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:51.450Z,1509057051.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:51.833Z,1509057051.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:51.850Z,1509057051.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:52.240Z,1509057052.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:52.256Z,1509057052.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:52.633Z,1509057052.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:52.649Z,1509057052.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:53.049Z,1509057053.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:53.070Z,1509057053.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:53.438Z,1509057053.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:53.468Z,1509057053.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:53.831Z,1509057053.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:53.848Z,1509057053.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:54.234Z,1509057054.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:54.252Z,1509057054.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:54.630Z,1509057054.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:54.646Z,1509057054.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:55.043Z,1509057055.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:55.060Z,1509057055.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:55.436Z,1509057055.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:55.460Z,1509057055.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:55.826Z,1509057055.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:55.854Z,1509057055.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:56.236Z,1509057056.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:56.298Z,1509057056.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:56.632Z,1509057056.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:56.688Z,1509057056.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:57.025Z,1509057057.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:57.070Z,1509057057.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:57.435Z,1509057057.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:57.489Z,1509057057.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:57.830Z,1509057057.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:57.847Z,1509057057.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:58.241Z,1509057058.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:58.294Z,1509057058.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:58.638Z,1509057058.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:58.695Z,1509057058.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:59.031Z,1509057059.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:59.056Z,1509057059.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:59.438Z,1509057059.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:59.454Z,1509057059.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:30:59.845Z,1509057059.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:30:59.861Z,1509057059.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:00.243Z,1509057060.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:00.265Z,1509057060.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:00.629Z,1509057060.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:00.659Z,1509057060.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:01.022Z,1509057061.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:01.070Z,1509057061.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:01.434Z,1509057061.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:01.467Z,1509057061.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:01.833Z,1509057061.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:01.856Z,1509057061.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:02.235Z,1509057062.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:02.256Z,1509057062.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:02.634Z,1509057062.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:02.650Z,1509057062.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:03.034Z,1509057063.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:03.049Z,1509057063.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:03.430Z,1509057063.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:03.454Z,1509057063.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:03.831Z,1509057063.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:03.847Z,1509057063.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:04.236Z,1509057064.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:04.252Z,1509057064.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:04.635Z,1509057064.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:04.656Z,1509057064.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:05.036Z,1509057065.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:05.057Z,1509057065.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:05.438Z,1509057065.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:05.470Z,1509057065.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:05.829Z,1509057065.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:05.846Z,1509057065.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:06.231Z,1509057066.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:06.255Z,1509057066.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:06.634Z,1509057066.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:06.650Z,1509057066.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:07.028Z,1509057067.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:07.052Z,1509057067.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:07.435Z,1509057067.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:07.452Z,1509057067.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:07.833Z,1509057067.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:07.861Z,1509057067.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:08.242Z,1509057068.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:08.259Z,1509057068.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:08.625Z,1509057068.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:08.658Z,1509057068.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:09.053Z,1509057069.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:09.069Z,1509057069.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:09.438Z,1509057069.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:09.481Z,1509057069.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:09.832Z,1509057069.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:09.848Z,1509057069.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:10.232Z,1509057070.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:10.249Z,1509057070.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:10.780Z,1509057070.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:10.858Z,1509057070.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:11.183Z,1509057071.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:11.209Z,1509057071.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:11.594Z,1509057071.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:11.657Z,1509057071.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:12.002Z,1509057072.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:12.030Z,1509057072.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:12.382Z,1509057072.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:12.435Z,1509057072.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:12.787Z,1509057072.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:12.832Z,1509057072.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:13.201Z,1509057073.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:13.218Z,1509057073.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:13.573Z,1509057073.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:13.644Z,1509057073.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:13.970Z,1509057073.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:14.015Z,1509057074.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:14.366Z,1509057074.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:14.385Z,1509057074.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:14.781Z,1509057074.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:14.806Z,1509057074.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:15.187Z,1509057075.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:15.203Z,1509057075.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:15.583Z,1509057075.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:15.605Z,1509057075.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:15.966Z,1509057075.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:16.005Z,1509057076.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:16.374Z,1509057076.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:16.407Z,1509057076.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:16.779Z,1509057076.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:16.808Z,1509057076.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:17.184Z,1509057077.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:17.217Z,1509057077.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:17.592Z,1509057077.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:17.627Z,1509057077.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:17.980Z,1509057077.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:17.997Z,1509057077.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:18.380Z,1509057078.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:18.396Z,1509057078.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:18.773Z,1509057078.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:18.806Z,1509057078.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:19.169Z,1509057079.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:19.204Z,1509057079.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:19.580Z,1509057079.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:19.618Z,1509057079.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:19.972Z,1509057079.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:20.006Z,1509057080.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:20.375Z,1509057080.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:20.413Z,1509057080.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:20.773Z,1509057080.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:20.789Z,1509057080.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:21.183Z,1509057081.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:21.231Z,1509057081.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:21.581Z,1509057081.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:21.604Z,1509057081.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:21.978Z,1509057081.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:22.006Z,1509057082.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:22.393Z,1509057082.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:22.409Z,1509057082.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:22.770Z,1509057082.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:22.808Z,1509057082.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:23.183Z,1509057083.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:23.215Z,1509057083.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:23.579Z,1509057083.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:23.595Z,1509057083.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:23.980Z,1509057083.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:23.996Z,1509057083.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:24.385Z,1509057084.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:24.407Z,1509057084.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:24.803Z,1509057084.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:24.941Z,1509057084.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:25.177Z,1509057085.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:25.277Z,1509057085.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:25.550Z,1509057085.550 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:31:25.570Z,1509057085.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:25.588Z,1509057085.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:25.973Z,1509057085.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:25.990Z,1509057085.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:26.371Z,1509057086.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:26.429Z,1509057086.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:26.784Z,1509057086.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:26.814Z,1509057086.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:27.179Z,1509057087.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:27.245Z,1509057087.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:27.579Z,1509057087.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:27.646Z,1509057087.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:28.177Z,1509057088.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:28.222Z,1509057088.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:28.571Z,1509057088.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:28.616Z,1509057088.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:29.020Z,1509057089.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:29.088Z,1509057089.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:29.381Z,1509057089.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:29.416Z,1509057089.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:29.785Z,1509057089.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:29.811Z,1509057089.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:30.180Z,1509057090.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:30.241Z,1509057090.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:30.567Z,1509057090.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:30.613Z,1509057090.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:31.005Z,1509057091.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:31.054Z,1509057091.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:31.387Z,1509057091.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:31.418Z,1509057091.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:31.778Z,1509057091.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:31.824Z,1509057091.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:32.177Z,1509057092.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:32.217Z,1509057092.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:32.566Z,1509057092.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:32.604Z,1509057092.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:33.012Z,1509057093.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:33.048Z,1509057093.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:33.372Z,1509057093.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:33.405Z,1509057093.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:33.770Z,1509057093.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:33.806Z,1509057093.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:34.175Z,1509057094.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:34.217Z,1509057094.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:34.585Z,1509057094.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:34.618Z,1509057094.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:34.989Z,1509057094.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:35.034Z,1509057095.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:35.379Z,1509057095.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:35.421Z,1509057095.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:35.781Z,1509057095.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:35.795Z,1509057095.795 [PNI_TCM](ERROR): CRC does not match. Expected:0x9740 got:0x38817
2017-10-26T22:31:35.832Z,1509057095.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:36.179Z,1509057096.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:36.212Z,1509057096.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:36.566Z,1509057096.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:36.599Z,1509057096.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:37.016Z,1509057097.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:37.041Z,1509057097.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:37.374Z,1509057097.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:37.414Z,1509057097.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:37.778Z,1509057097.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:37.793Z,1509057097.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:38.181Z,1509057098.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:38.223Z,1509057098.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:38.578Z,1509057098.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:38.603Z,1509057098.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:38.983Z,1509057098.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:39.039Z,1509057099.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:39.390Z,1509057099.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:39.446Z,1509057099.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:39.770Z,1509057099.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:39.858Z,1509057099.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:40.171Z,1509057100.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:40.216Z,1509057100.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:40.567Z,1509057100.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:40.640Z,1509057100.640 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:41.035Z,1509057101.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:41.084Z,1509057101.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:41.377Z,1509057101.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:41.441Z,1509057101.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:41.782Z,1509057101.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:41.869Z,1509057101.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:42.186Z,1509057102.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:42.222Z,1509057102.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:42.583Z,1509057102.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:42.601Z,1509057102.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:42.983Z,1509057102.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:43.053Z,1509057103.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:43.368Z,1509057103.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:43.410Z,1509057103.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:43.777Z,1509057103.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:43.821Z,1509057103.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:44.179Z,1509057104.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:44.214Z,1509057104.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:44.578Z,1509057104.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:44.613Z,1509057104.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:45.005Z,1509057105.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:45.077Z,1509057105.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:45.378Z,1509057105.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:45.413Z,1509057105.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:45.783Z,1509057105.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:45.807Z,1509057105.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:46.180Z,1509057106.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:46.213Z,1509057106.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:46.666Z,1509057106.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:46.700Z,1509057106.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:47.095Z,1509057107.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:47.159Z,1509057107.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:47.493Z,1509057107.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:47.509Z,1509057107.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:47.884Z,1509057107.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:47.912Z,1509057107.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:48.298Z,1509057108.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:48.320Z,1509057108.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:48.671Z,1509057108.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:48.712Z,1509057108.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:49.080Z,1509057109.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:49.153Z,1509057109.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:49.484Z,1509057109.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:49.509Z,1509057109.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:49.884Z,1509057109.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:49.901Z,1509057109.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:50.290Z,1509057110.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:50.311Z,1509057110.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:50.679Z,1509057110.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:50.716Z,1509057110.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:51.079Z,1509057111.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:51.146Z,1509057111.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:51.481Z,1509057111.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:51.513Z,1509057111.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:51.883Z,1509057111.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:51.899Z,1509057111.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:52.285Z,1509057112.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:52.313Z,1509057112.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:52.687Z,1509057112.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:52.711Z,1509057112.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:53.090Z,1509057113.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:53.114Z,1509057113.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:53.488Z,1509057113.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:53.520Z,1509057113.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:53.886Z,1509057113.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:53.922Z,1509057113.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:54.283Z,1509057114.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:54.357Z,1509057114.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:54.677Z,1509057114.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:54.706Z,1509057114.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:55.073Z,1509057115.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:55.148Z,1509057115.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:55.481Z,1509057115.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:55.518Z,1509057115.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:55.879Z,1509057115.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:55.931Z,1509057115.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:56.283Z,1509057116.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:56.336Z,1509057116.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:56.677Z,1509057116.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:56.694Z,1509057116.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:57.085Z,1509057117.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:57.101Z,1509057117.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:57.484Z,1509057117.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:57.501Z,1509057117.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:57.891Z,1509057117.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:57.936Z,1509057117.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:58.295Z,1509057118.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:58.316Z,1509057118.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:58.690Z,1509057118.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:58.706Z,1509057118.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:59.088Z,1509057119.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:59.105Z,1509057119.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:59.491Z,1509057119.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:59.513Z,1509057119.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:31:59.881Z,1509057119.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:31:59.909Z,1509057119.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:00.280Z,1509057120.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:00.318Z,1509057120.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:00.688Z,1509057120.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:00.721Z,1509057120.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:01.081Z,1509057121.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:01.125Z,1509057121.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:01.486Z,1509057121.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:01.508Z,1509057121.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:01.889Z,1509057121.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:01.905Z,1509057121.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:02.285Z,1509057122.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:02.303Z,1509057122.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:02.679Z,1509057122.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:02.707Z,1509057122.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:03.078Z,1509057123.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:03.133Z,1509057123.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:03.478Z,1509057123.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:03.517Z,1509057123.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:03.883Z,1509057123.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:03.911Z,1509057123.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:04.277Z,1509057124.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:04.306Z,1509057124.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:04.680Z,1509057124.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:04.696Z,1509057124.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:05.097Z,1509057125.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:05.147Z,1509057125.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:05.485Z,1509057125.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:05.505Z,1509057125.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:05.884Z,1509057125.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:05.901Z,1509057125.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:06.285Z,1509057126.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:06.311Z,1509057126.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:06.683Z,1509057126.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:06.705Z,1509057126.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:07.101Z,1509057127.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:07.149Z,1509057127.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:07.486Z,1509057127.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:07.519Z,1509057127.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:07.879Z,1509057127.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:07.907Z,1509057127.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:08.286Z,1509057128.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:08.347Z,1509057128.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:08.690Z,1509057128.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:08.747Z,1509057128.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:09.086Z,1509057129.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:09.112Z,1509057129.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:09.480Z,1509057129.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:09.535Z,1509057129.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:09.895Z,1509057129.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:09.994Z,1509057129.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:10.291Z,1509057130.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:10.348Z,1509057130.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:10.692Z,1509057130.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:10.748Z,1509057130.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:11.078Z,1509057131.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:11.114Z,1509057131.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:11.477Z,1509057131.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:11.527Z,1509057131.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:11.877Z,1509057131.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:11.902Z,1509057131.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:12.282Z,1509057132.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:12.299Z,1509057132.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:12.683Z,1509057132.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:12.700Z,1509057132.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:13.086Z,1509057133.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:13.134Z,1509057133.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:13.474Z,1509057133.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:13.509Z,1509057133.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:13.879Z,1509057133.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:13.910Z,1509057133.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:14.299Z,1509057134.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:14.323Z,1509057134.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:14.684Z,1509057134.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:14.715Z,1509057134.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:15.088Z,1509057135.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:15.115Z,1509057135.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:15.478Z,1509057135.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:15.494Z,1509057135.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:15.886Z,1509057135.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:15.927Z,1509057135.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:16.284Z,1509057136.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:16.301Z,1509057136.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:16.689Z,1509057136.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:16.705Z,1509057136.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:17.089Z,1509057137.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:17.105Z,1509057137.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:17.492Z,1509057137.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:17.509Z,1509057137.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:17.889Z,1509057137.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:17.910Z,1509057137.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:18.290Z,1509057138.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:18.306Z,1509057138.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:18.694Z,1509057138.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:18.727Z,1509057138.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:19.079Z,1509057139.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:19.147Z,1509057139.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:19.484Z,1509057139.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:19.501Z,1509057139.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:19.885Z,1509057139.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:19.902Z,1509057139.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:20.283Z,1509057140.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:20.299Z,1509057140.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:20.705Z,1509057140.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:20.747Z,1509057140.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:21.102Z,1509057141.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:21.154Z,1509057141.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:21.476Z,1509057141.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:21.509Z,1509057141.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:21.875Z,1509057141.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:21.896Z,1509057141.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:22.276Z,1509057142.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:22.305Z,1509057142.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:22.678Z,1509057142.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:22.756Z,1509057142.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:23.088Z,1509057143.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:23.105Z,1509057143.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:23.487Z,1509057143.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:23.542Z,1509057143.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:23.892Z,1509057143.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:23.909Z,1509057143.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:24.292Z,1509057144.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:24.355Z,1509057144.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:24.693Z,1509057144.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:24.750Z,1509057144.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:25.072Z,1509057145.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:25.100Z,1509057145.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:25.484Z,1509057145.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:25.508Z,1509057145.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:25.860Z,1509057145.860 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:32:25.888Z,1509057145.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:25.922Z,1509057145.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:26.288Z,1509057146.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:26.305Z,1509057146.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:26.704Z,1509057146.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:26.740Z,1509057146.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:27.092Z,1509057147.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:27.107Z,1509057147.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:27.476Z,1509057147.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:27.505Z,1509057147.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:27.897Z,1509057147.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:27.925Z,1509057147.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:28.274Z,1509057148.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:28.310Z,1509057148.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:28.674Z,1509057148.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:28.691Z,1509057148.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:29.086Z,1509057149.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:29.138Z,1509057149.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:29.487Z,1509057149.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:29.503Z,1509057149.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:29.888Z,1509057149.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:29.926Z,1509057149.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:30.283Z,1509057150.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:30.313Z,1509057150.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:30.688Z,1509057150.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:30.704Z,1509057150.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:31.074Z,1509057151.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:31.148Z,1509057151.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:31.483Z,1509057151.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:31.520Z,1509057151.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:31.880Z,1509057151.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:31.931Z,1509057151.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:32.292Z,1509057152.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:32.321Z,1509057152.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:32.684Z,1509057152.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:32.702Z,1509057152.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:33.084Z,1509057153.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:33.100Z,1509057153.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:33.493Z,1509057153.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:33.510Z,1509057153.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:33.888Z,1509057153.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:33.908Z,1509057153.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:34.274Z,1509057154.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:34.316Z,1509057154.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:34.681Z,1509057154.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:34.710Z,1509057154.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:35.093Z,1509057155.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:35.147Z,1509057155.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:35.479Z,1509057155.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:35.495Z,1509057155.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:35.887Z,1509057155.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:35.903Z,1509057155.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:36.283Z,1509057156.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:36.299Z,1509057156.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:36.687Z,1509057156.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:36.703Z,1509057156.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:37.077Z,1509057157.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:37.172Z,1509057157.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:37.483Z,1509057157.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:37.520Z,1509057157.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:37.885Z,1509057157.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:37.957Z,1509057157.957 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:38.276Z,1509057158.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:38.293Z,1509057158.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:38.685Z,1509057158.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:38.770Z,1509057158.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:39.089Z,1509057159.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:39.142Z,1509057159.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:39.484Z,1509057159.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:39.539Z,1509057159.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:39.881Z,1509057159.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:39.900Z,1509057159.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:40.283Z,1509057160.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:40.300Z,1509057160.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:40.682Z,1509057160.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:40.698Z,1509057160.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:41.104Z,1509057161.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:41.137Z,1509057161.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:41.476Z,1509057161.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:41.501Z,1509057161.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:41.880Z,1509057161.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:41.908Z,1509057161.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:42.290Z,1509057162.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:42.306Z,1509057162.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:42.679Z,1509057162.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:42.707Z,1509057162.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:43.082Z,1509057163.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:43.156Z,1509057163.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:43.485Z,1509057163.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:43.522Z,1509057163.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:43.879Z,1509057163.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:43.911Z,1509057163.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:44.286Z,1509057164.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:44.321Z,1509057164.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:44.683Z,1509057164.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:44.723Z,1509057164.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:45.089Z,1509057165.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:45.109Z,1509057165.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:45.483Z,1509057165.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:45.509Z,1509057165.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:45.872Z,1509057165.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:45.913Z,1509057165.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:46.273Z,1509057166.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:46.310Z,1509057166.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:46.687Z,1509057166.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:46.704Z,1509057166.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:47.074Z,1509057167.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:47.106Z,1509057167.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:47.480Z,1509057167.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:47.513Z,1509057167.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:47.877Z,1509057167.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:47.910Z,1509057167.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:48.283Z,1509057168.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:48.315Z,1509057168.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:48.678Z,1509057168.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:48.694Z,1509057168.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:49.081Z,1509057169.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:49.098Z,1509057169.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:49.483Z,1509057169.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:49.515Z,1509057169.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:49.890Z,1509057169.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:49.911Z,1509057169.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:50.288Z,1509057170.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:50.312Z,1509057170.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:50.689Z,1509057170.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:50.706Z,1509057170.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:51.072Z,1509057171.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:51.167Z,1509057171.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:51.481Z,1509057171.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:51.534Z,1509057171.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:51.881Z,1509057171.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:51.897Z,1509057171.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:52.290Z,1509057172.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:52.347Z,1509057172.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:52.680Z,1509057172.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:52.718Z,1509057172.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:53.078Z,1509057173.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:53.147Z,1509057173.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:53.494Z,1509057173.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:53.548Z,1509057173.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:53.887Z,1509057173.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:53.909Z,1509057173.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:54.293Z,1509057174.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:54.314Z,1509057174.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:54.682Z,1509057174.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:54.715Z,1509057174.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:55.101Z,1509057175.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:55.172Z,1509057175.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:55.479Z,1509057175.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:55.520Z,1509057175.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:55.878Z,1509057175.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:55.900Z,1509057175.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:56.292Z,1509057176.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:56.329Z,1509057176.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:56.691Z,1509057176.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:56.708Z,1509057176.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:57.095Z,1509057177.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:57.115Z,1509057177.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:57.475Z,1509057177.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:57.491Z,1509057177.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:57.884Z,1509057177.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:57.917Z,1509057177.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:58.284Z,1509057178.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:58.300Z,1509057178.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:58.680Z,1509057178.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:58.708Z,1509057178.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:59.084Z,1509057179.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:59.101Z,1509057179.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:59.493Z,1509057179.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:59.509Z,1509057179.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:32:59.878Z,1509057179.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:32:59.906Z,1509057179.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:00.407Z,1509057180.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:00.456Z,1509057180.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:00.807Z,1509057180.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:00.823Z,1509057180.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:01.196Z,1509057181.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:01.224Z,1509057181.224 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:01.224Z,1509057181.224 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 55
2017-10-26T22:33:01.224Z,1509057181.224 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:33:01.229Z,1509057181.229 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:01.229Z,1509057181.229 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 55
2017-10-26T22:33:01.229Z,1509057181.229 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:33:01.319Z,1509057181.319 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:33:01.320Z,1509057181.320 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:33:01.649Z,1509057181.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:01.808Z,1509057181.808 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:33:01.808Z,1509057181.808 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 55
2017-10-26T22:33:01.809Z,1509057181.809 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:33:01.809Z,1509057181.809 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 55
2017-10-26T22:33:02.000Z,1509057182.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:02.020Z,1509057182.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:33:02.020Z,1509057182.020 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:33:02.020Z,1509057182.020 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:33:02.023Z,1509057182.023 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:33:02.024Z,1509057182.024 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:33:02.024Z,1509057182.024 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:33:02.411Z,1509057182.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:02.457Z,1509057182.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:02.791Z,1509057182.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:02.827Z,1509057182.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:03.202Z,1509057183.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:03.234Z,1509057183.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:03.599Z,1509057183.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:03.615Z,1509057183.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:03.999Z,1509057183.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:04.016Z,1509057184.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:04.401Z,1509057184.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:04.419Z,1509057184.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:04.794Z,1509057184.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:04.831Z,1509057184.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:05.200Z,1509057185.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:05.217Z,1509057185.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:05.602Z,1509057185.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:05.703Z,1509057185.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:05.000Z,1509057186.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:06.028Z,1509057186.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:06.394Z,1509057186.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:06.427Z,1509057186.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:06.793Z,1509057186.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:06.838Z,1509057186.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:07.214Z,1509057187.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:07.234Z,1509057187.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:07.602Z,1509057187.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:07.658Z,1509057187.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:07.993Z,1509057187.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:08.052Z,1509057188.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:08.401Z,1509057188.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:08.434Z,1509057188.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:08.801Z,1509057188.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:08.817Z,1509057188.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:09.308Z,1509057189.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:09.324Z,1509057189.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:09.708Z,1509057189.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:09.725Z,1509057189.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:10.106Z,1509057190.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:10.157Z,1509057190.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:10.497Z,1509057190.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:10.529Z,1509057190.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:10.900Z,1509057190.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:10.929Z,1509057190.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:11.310Z,1509057191.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:11.353Z,1509057191.353 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:11.705Z,1509057191.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:11.734Z,1509057191.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:12.105Z,1509057192.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:12.163Z,1509057192.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:12.506Z,1509057192.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:12.535Z,1509057192.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:12.910Z,1509057192.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:12.935Z,1509057192.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:13.312Z,1509057193.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:13.337Z,1509057193.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:13.696Z,1509057193.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:13.794Z,1509057193.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:14.109Z,1509057194.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:14.168Z,1509057194.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:14.499Z,1509057194.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:14.536Z,1509057194.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:14.899Z,1509057194.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:14.940Z,1509057194.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:15.310Z,1509057195.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:15.348Z,1509057195.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:15.714Z,1509057195.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:15.736Z,1509057195.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:16.108Z,1509057196.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:16.164Z,1509057196.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:16.498Z,1509057196.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:16.527Z,1509057196.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:16.977Z,1509057196.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:17.002Z,1509057197.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:17.301Z,1509057197.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:17.354Z,1509057197.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:17.706Z,1509057197.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:17.758Z,1509057197.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:18.107Z,1509057198.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:18.158Z,1509057198.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:18.539Z,1509057198.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:18.605Z,1509057198.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:18.971Z,1509057198.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:19.058Z,1509057199.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:19.317Z,1509057199.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:19.345Z,1509057199.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:19.708Z,1509057199.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:19.737Z,1509057199.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:20.240Z,1509057200.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:20.303Z,1509057200.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:20.650Z,1509057200.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:20.678Z,1509057200.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:21.059Z,1509057201.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:21.085Z,1509057201.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:21.452Z,1509057201.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:21.468Z,1509057201.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:21.862Z,1509057201.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:21.898Z,1509057201.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:22.252Z,1509057202.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:22.273Z,1509057202.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:22.655Z,1509057202.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:22.672Z,1509057202.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:23.056Z,1509057203.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:23.064Z,1509057203.064 [BPC1](ERROR): Failed to receive battery data
2017-10-26T22:33:23.064Z,1509057203.064 [BPC1] Communications Fault, FailCount= 1
2017-10-26T22:33:23.064Z,1509057203.064 [BPC1](ERROR): Communications Fault
2017-10-26T22:33:23.073Z,1509057203.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:23.151Z,1509057203.151 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T22:33:23.448Z,1509057203.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:23.477Z,1509057203.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:23.852Z,1509057203.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:23.893Z,1509057203.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:24.248Z,1509057204.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:24.284Z,1509057204.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:24.395Z,1509057204.395 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:33:24.395Z,1509057204.395 [BPC1] No Fault, FailCount= 1
2017-10-26T22:33:24.653Z,1509057204.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:24.738Z,1509057204.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:25.076Z,1509057205.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:25.092Z,1509057205.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:25.455Z,1509057205.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:25.491Z,1509057205.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:25.855Z,1509057205.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:25.891Z,1509057205.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:26.226Z,1509057206.226 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:33:26.255Z,1509057206.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:26.283Z,1509057206.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:26.661Z,1509057206.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:26.678Z,1509057206.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:27.048Z,1509057207.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:27.079Z,1509057207.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:27.499Z,1509057207.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:27.526Z,1509057207.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:27.854Z,1509057207.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:27.884Z,1509057207.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:28.252Z,1509057208.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:28.288Z,1509057208.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:28.652Z,1509057208.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:28.687Z,1509057208.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:29.059Z,1509057209.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:29.117Z,1509057209.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:29.459Z,1509057209.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:29.476Z,1509057209.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:29.857Z,1509057209.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:29.874Z,1509057209.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:30.255Z,1509057210.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:30.276Z,1509057210.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:30.646Z,1509057210.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:30.686Z,1509057210.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:31.057Z,1509057211.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:31.083Z,1509057211.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:31.447Z,1509057211.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:31.484Z,1509057211.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:31.846Z,1509057211.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:31.862Z,1509057211.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:32.255Z,1509057212.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:32.272Z,1509057212.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:32.649Z,1509057212.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:32.689Z,1509057212.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:33.071Z,1509057213.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:33.102Z,1509057213.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:33.463Z,1509057213.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:33.479Z,1509057213.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:33.845Z,1509057213.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:33.873Z,1509057213.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:34.251Z,1509057214.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:34.283Z,1509057214.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:34.652Z,1509057214.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:34.669Z,1509057214.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:35.070Z,1509057215.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:35.176Z,1509057215.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:35.457Z,1509057215.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:35.486Z,1509057215.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:35.857Z,1509057215.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:35.874Z,1509057215.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:36.262Z,1509057216.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:36.279Z,1509057216.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:36.643Z,1509057216.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:36.673Z,1509057216.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:37.071Z,1509057217.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:37.092Z,1509057217.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:37.445Z,1509057217.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:37.477Z,1509057217.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:37.851Z,1509057217.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:37.887Z,1509057217.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:38.257Z,1509057218.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:38.290Z,1509057218.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:38.657Z,1509057218.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:38.673Z,1509057218.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:39.054Z,1509057219.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:39.076Z,1509057219.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:39.463Z,1509057219.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:39.480Z,1509057219.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:39.865Z,1509057219.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:39.890Z,1509057219.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:40.269Z,1509057220.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:40.337Z,1509057220.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:40.648Z,1509057220.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:40.682Z,1509057220.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:41.046Z,1509057221.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:41.144Z,1509057221.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:41.448Z,1509057221.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:41.484Z,1509057221.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:41.848Z,1509057221.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:41.903Z,1509057221.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:42.251Z,1509057222.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:42.301Z,1509057222.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:42.652Z,1509057222.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:42.689Z,1509057222.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:43.057Z,1509057223.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:43.074Z,1509057223.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:43.446Z,1509057223.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:43.484Z,1509057223.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:43.851Z,1509057223.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:43.881Z,1509057223.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:44.254Z,1509057224.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:44.279Z,1509057224.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:44.652Z,1509057224.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:44.669Z,1509057224.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:45.064Z,1509057225.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:45.100Z,1509057225.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:45.451Z,1509057225.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:45.474Z,1509057225.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:45.858Z,1509057225.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:45.875Z,1509057225.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:46.262Z,1509057226.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:46.278Z,1509057226.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:46.667Z,1509057226.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:46.684Z,1509057226.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:47.058Z,1509057227.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:47.080Z,1509057227.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:47.444Z,1509057227.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:47.481Z,1509057227.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:47.847Z,1509057227.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:47.868Z,1509057227.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:48.266Z,1509057228.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:48.284Z,1509057228.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:48.655Z,1509057228.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:48.678Z,1509057228.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:49.063Z,1509057229.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:49.080Z,1509057229.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:49.449Z,1509057229.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:49.482Z,1509057229.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:49.848Z,1509057229.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:49.886Z,1509057229.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:50.272Z,1509057230.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:50.294Z,1509057230.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:50.651Z,1509057230.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:50.684Z,1509057230.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:51.055Z,1509057231.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:51.094Z,1509057231.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:51.460Z,1509057231.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:51.508Z,1509057231.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:51.860Z,1509057231.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:51.876Z,1509057231.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:52.259Z,1509057232.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:52.306Z,1509057232.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:52.662Z,1509057232.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:52.679Z,1509057232.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:53.067Z,1509057233.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:53.089Z,1509057233.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:53.453Z,1509057233.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:53.522Z,1509057233.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:53.848Z,1509057233.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:53.888Z,1509057233.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:54.254Z,1509057234.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:54.311Z,1509057234.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:54.648Z,1509057234.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:54.684Z,1509057234.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:55.048Z,1509057235.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:55.128Z,1509057235.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:55.467Z,1509057235.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:55.483Z,1509057235.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:55.860Z,1509057235.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:55.917Z,1509057235.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:56.259Z,1509057236.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:56.314Z,1509057236.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:56.650Z,1509057236.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:56.678Z,1509057236.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:57.043Z,1509057237.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:57.076Z,1509057237.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:57.467Z,1509057237.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:57.488Z,1509057237.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:57.852Z,1509057237.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:57.893Z,1509057237.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:58.251Z,1509057238.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:58.270Z,1509057238.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:58.656Z,1509057238.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:58.672Z,1509057238.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:59.062Z,1509057239.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:59.081Z,1509057239.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:59.464Z,1509057239.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:59.487Z,1509057239.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:33:59.847Z,1509057239.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:33:59.886Z,1509057239.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:00.244Z,1509057240.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:00.277Z,1509057240.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:00.646Z,1509057240.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:00.683Z,1509057240.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:01.056Z,1509057241.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:01.080Z,1509057241.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:01.459Z,1509057241.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:01.505Z,1509057241.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:01.854Z,1509057241.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:01.885Z,1509057241.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:02.256Z,1509057242.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:02.272Z,1509057242.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:02.656Z,1509057242.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:02.672Z,1509057242.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:03.058Z,1509057243.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:03.074Z,1509057243.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:03.461Z,1509057243.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:03.479Z,1509057243.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:03.864Z,1509057243.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:03.880Z,1509057243.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:04.246Z,1509057244.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:04.275Z,1509057244.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:04.648Z,1509057244.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:04.699Z,1509057244.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:05.074Z,1509057245.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:05.093Z,1509057245.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:05.444Z,1509057245.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:05.480Z,1509057245.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:05.857Z,1509057245.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:05.889Z,1509057245.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:06.259Z,1509057246.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:06.275Z,1509057246.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:06.647Z,1509057246.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:06.686Z,1509057246.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:07.047Z,1509057247.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:07.091Z,1509057247.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:07.459Z,1509057247.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:07.523Z,1509057247.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:07.849Z,1509057247.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:07.894Z,1509057247.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:08.259Z,1509057248.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:08.329Z,1509057248.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:08.666Z,1509057248.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:08.699Z,1509057248.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:09.054Z,1509057249.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:09.093Z,1509057249.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:09.451Z,1509057249.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:09.499Z,1509057249.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:09.850Z,1509057249.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:09.875Z,1509057249.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:10.256Z,1509057250.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:10.316Z,1509057250.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:10.661Z,1509057250.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:10.721Z,1509057250.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:11.057Z,1509057251.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:11.073Z,1509057251.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:11.458Z,1509057251.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:11.492Z,1509057251.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:11.846Z,1509057251.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:11.886Z,1509057251.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:12.246Z,1509057252.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:12.283Z,1509057252.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:12.659Z,1509057252.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:12.698Z,1509057252.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:13.059Z,1509057253.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:13.092Z,1509057253.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:13.453Z,1509057253.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:13.477Z,1509057253.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:13.852Z,1509057253.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:13.877Z,1509057253.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:14.253Z,1509057254.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:14.273Z,1509057254.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:14.661Z,1509057254.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:14.677Z,1509057254.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:15.050Z,1509057255.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:15.080Z,1509057255.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:15.459Z,1509057255.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:15.491Z,1509057255.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:15.851Z,1509057255.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:15.880Z,1509057255.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:16.250Z,1509057256.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:16.273Z,1509057256.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:16.655Z,1509057256.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:16.678Z,1509057256.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:17.061Z,1509057257.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:17.087Z,1509057257.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:17.462Z,1509057257.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:17.478Z,1509057257.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:17.865Z,1509057257.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:17.881Z,1509057257.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:18.249Z,1509057258.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:18.287Z,1509057258.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:18.651Z,1509057258.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:18.681Z,1509057258.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:19.081Z,1509057259.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:19.097Z,1509057259.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:19.455Z,1509057259.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:19.487Z,1509057259.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:19.859Z,1509057259.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:19.896Z,1509057259.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:20.254Z,1509057260.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:20.271Z,1509057260.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:20.655Z,1509057260.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:20.672Z,1509057260.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:21.060Z,1509057261.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:21.081Z,1509057261.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:21.462Z,1509057261.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:21.479Z,1509057261.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:21.860Z,1509057261.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:21.936Z,1509057261.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:22.250Z,1509057262.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:22.290Z,1509057262.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:22.385Z,1509057262.385 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T22:34:22.645Z,1509057262.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:22.710Z,1509057262.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:23.059Z,1509057263.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:23.075Z,1509057263.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:23.462Z,1509057263.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:23.520Z,1509057263.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:23.865Z,1509057263.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:23.886Z,1509057263.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:24.245Z,1509057264.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:24.294Z,1509057264.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:24.658Z,1509057264.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:24.734Z,1509057264.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:25.058Z,1509057265.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:25.082Z,1509057265.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:25.455Z,1509057265.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:25.483Z,1509057265.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:25.852Z,1509057265.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:25.868Z,1509057265.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:26.235Z,1509057266.235 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:34:26.264Z,1509057266.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:26.294Z,1509057266.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:26.658Z,1509057266.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:26.675Z,1509057266.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:27.057Z,1509057267.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:27.073Z,1509057267.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:27.460Z,1509057267.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:27.492Z,1509057267.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:27.855Z,1509057267.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:27.880Z,1509057267.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:28.270Z,1509057268.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:28.288Z,1509057268.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:28.656Z,1509057268.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:28.688Z,1509057268.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:29.061Z,1509057269.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:29.096Z,1509057269.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:29.450Z,1509057269.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:29.486Z,1509057269.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:29.859Z,1509057269.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:29.876Z,1509057269.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:30.260Z,1509057270.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:30.276Z,1509057270.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:30.654Z,1509057270.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:30.687Z,1509057270.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:31.048Z,1509057271.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:31.086Z,1509057271.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:31.449Z,1509057271.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:31.492Z,1509057271.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:31.853Z,1509057271.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:31.883Z,1509057271.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:32.245Z,1509057272.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:32.286Z,1509057272.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:32.648Z,1509057272.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:32.681Z,1509057272.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:33.055Z,1509057273.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:33.097Z,1509057273.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:33.452Z,1509057273.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:33.477Z,1509057273.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:33.853Z,1509057273.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:33.873Z,1509057273.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:34.256Z,1509057274.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:34.273Z,1509057274.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:34.654Z,1509057274.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:34.671Z,1509057274.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:35.061Z,1509057275.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:35.082Z,1509057275.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:35.466Z,1509057275.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:35.523Z,1509057275.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:35.851Z,1509057275.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:35.879Z,1509057275.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:36.270Z,1509057276.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:36.297Z,1509057276.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:36.649Z,1509057276.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:36.705Z,1509057276.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:37.054Z,1509057277.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:37.072Z,1509057277.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:37.457Z,1509057277.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:37.499Z,1509057277.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:37.861Z,1509057277.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:37.877Z,1509057277.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:38.259Z,1509057278.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:38.315Z,1509057278.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:38.657Z,1509057278.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:38.674Z,1509057278.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:39.052Z,1509057279.052 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:39.150Z,1509057279.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:39.677Z,1509057279.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:39.713Z,1509057279.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:40.080Z,1509057280.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:40.158Z,1509057280.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:40.492Z,1509057280.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:40.510Z,1509057280.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:40.941Z,1509057280.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:40.982Z,1509057280.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:41.279Z,1509057281.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:41.295Z,1509057281.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:41.683Z,1509057281.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:41.700Z,1509057281.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:42.082Z,1509057282.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:42.099Z,1509057282.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:42.489Z,1509057282.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:42.517Z,1509057282.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:42.887Z,1509057282.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:42.956Z,1509057282.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:43.285Z,1509057283.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:43.302Z,1509057283.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:43.685Z,1509057283.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:43.702Z,1509057283.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:44.109Z,1509057284.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:44.207Z,1509057284.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:44.484Z,1509057284.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:44.500Z,1509057284.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:44.956Z,1509057284.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:44.994Z,1509057284.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:45.297Z,1509057285.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:45.352Z,1509057285.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:45.678Z,1509057285.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:45.707Z,1509057285.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:46.081Z,1509057286.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:46.097Z,1509057286.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:46.483Z,1509057286.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:46.507Z,1509057286.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:46.904Z,1509057286.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:46.973Z,1509057286.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:47.279Z,1509057287.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:47.336Z,1509057287.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:47.685Z,1509057287.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:47.724Z,1509057287.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:48.086Z,1509057288.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:48.103Z,1509057288.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:48.485Z,1509057288.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:48.502Z,1509057288.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:48.935Z,1509057288.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:48.971Z,1509057288.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:49.285Z,1509057289.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:49.333Z,1509057289.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:49.858Z,1509057289.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:49.887Z,1509057289.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:50.265Z,1509057290.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:50.334Z,1509057290.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:50.670Z,1509057290.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:50.687Z,1509057290.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:51.065Z,1509057291.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:51.156Z,1509057291.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:51.474Z,1509057291.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:51.490Z,1509057291.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:51.873Z,1509057291.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:51.926Z,1509057291.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:52.269Z,1509057292.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:52.297Z,1509057292.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:52.670Z,1509057292.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:52.727Z,1509057292.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:53.076Z,1509057293.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:53.155Z,1509057293.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:53.466Z,1509057293.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:53.498Z,1509057293.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:53.874Z,1509057293.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:53.890Z,1509057293.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:54.270Z,1509057294.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:54.296Z,1509057294.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:54.671Z,1509057294.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:54.700Z,1509057294.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:55.061Z,1509057295.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:55.094Z,1509057295.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:55.478Z,1509057295.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:55.512Z,1509057295.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:55.860Z,1509057295.860 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:55.908Z,1509057295.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:56.267Z,1509057296.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:56.300Z,1509057296.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:56.664Z,1509057296.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:56.691Z,1509057296.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:57.066Z,1509057297.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:57.093Z,1509057297.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:57.471Z,1509057297.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:57.493Z,1509057297.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:57.875Z,1509057297.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:57.891Z,1509057297.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:58.258Z,1509057298.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:58.287Z,1509057298.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:58.652Z,1509057298.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:58.685Z,1509057298.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:59.086Z,1509057299.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:59.102Z,1509057299.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:59.468Z,1509057299.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:59.505Z,1509057299.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:34:59.867Z,1509057299.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:34:59.896Z,1509057299.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:00.269Z,1509057300.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:00.311Z,1509057300.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:00.670Z,1509057300.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:00.710Z,1509057300.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:01.096Z,1509057301.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:01.151Z,1509057301.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:01.469Z,1509057301.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:01.486Z,1509057301.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:01.972Z,1509057301.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:02.000Z,1509057302.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:02.378Z,1509057302.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:02.394Z,1509057302.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:02.776Z,1509057302.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:02.792Z,1509057302.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:03.186Z,1509057303.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:03.203Z,1509057303.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:03.574Z,1509057303.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:03.655Z,1509057303.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:03.968Z,1509057303.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:04.010Z,1509057304.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:04.375Z,1509057304.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:04.402Z,1509057304.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:04.775Z,1509057304.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:04.799Z,1509057304.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:05.171Z,1509057305.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:05.225Z,1509057305.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:05.588Z,1509057305.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:05.624Z,1509057305.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:05.968Z,1509057305.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:06.023Z,1509057306.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:06.368Z,1509057306.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:06.404Z,1509057306.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:06.773Z,1509057306.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:06.831Z,1509057306.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:07.178Z,1509057307.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:07.230Z,1509057307.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:07.580Z,1509057307.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:07.596Z,1509057307.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:07.981Z,1509057307.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:08.002Z,1509057308.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:08.382Z,1509057308.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:08.399Z,1509057308.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:08.784Z,1509057308.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:08.801Z,1509057308.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:09.183Z,1509057309.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:09.209Z,1509057309.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:09.569Z,1509057309.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:09.593Z,1509057309.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:09.975Z,1509057309.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:10.003Z,1509057310.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:10.371Z,1509057310.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:10.399Z,1509057310.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:10.784Z,1509057310.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:10.801Z,1509057310.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:11.201Z,1509057311.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:11.224Z,1509057311.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:11.575Z,1509057311.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:11.591Z,1509057311.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:11.974Z,1509057311.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:11.990Z,1509057311.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:12.382Z,1509057312.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:12.421Z,1509057312.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:12.785Z,1509057312.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:12.835Z,1509057312.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:13.176Z,1509057313.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:13.201Z,1509057313.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:13.569Z,1509057313.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:13.590Z,1509057313.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:13.971Z,1509057313.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:13.987Z,1509057313.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:14.372Z,1509057314.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:14.396Z,1509057314.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:14.778Z,1509057314.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:14.800Z,1509057314.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:15.168Z,1509057315.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:15.205Z,1509057315.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:15.573Z,1509057315.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:15.602Z,1509057315.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:15.965Z,1509057315.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:15.998Z,1509057315.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:16.372Z,1509057316.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:16.403Z,1509057316.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:16.775Z,1509057316.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:16.807Z,1509057316.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:17.190Z,1509057317.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:17.206Z,1509057317.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:17.578Z,1509057317.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:17.595Z,1509057317.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:17.990Z,1509057317.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:18.041Z,1509057318.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:18.377Z,1509057318.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:18.394Z,1509057318.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:18.775Z,1509057318.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:18.791Z,1509057318.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:19.182Z,1509057319.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:19.215Z,1509057319.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:19.580Z,1509057319.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:19.647Z,1509057319.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:19.974Z,1509057319.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:20.004Z,1509057320.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:20.372Z,1509057320.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:20.429Z,1509057320.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:20.765Z,1509057320.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:20.806Z,1509057320.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:21.181Z,1509057321.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:21.230Z,1509057321.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:21.578Z,1509057321.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:21.630Z,1509057321.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:21.977Z,1509057321.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:22.018Z,1509057322.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:22.374Z,1509057322.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:22.390Z,1509057322.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:22.774Z,1509057322.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:22.790Z,1509057322.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:23.181Z,1509057323.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:23.198Z,1509057323.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:23.565Z,1509057323.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:23.615Z,1509057323.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:23.967Z,1509057323.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:24.004Z,1509057324.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:24.370Z,1509057324.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:24.400Z,1509057324.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:24.775Z,1509057324.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:24.811Z,1509057324.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:25.170Z,1509057325.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:25.193Z,1509057325.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:25.575Z,1509057325.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:25.592Z,1509057325.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:25.976Z,1509057325.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:25.995Z,1509057325.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:26.348Z,1509057326.348 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:35:26.388Z,1509057326.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:26.405Z,1509057326.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:26.774Z,1509057326.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:26.802Z,1509057326.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:27.172Z,1509057327.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:27.203Z,1509057327.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:27.568Z,1509057327.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:27.589Z,1509057327.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:27.973Z,1509057327.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:27.989Z,1509057327.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:28.372Z,1509057328.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:28.396Z,1509057328.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:28.783Z,1509057328.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:28.799Z,1509057328.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:29.178Z,1509057329.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:29.211Z,1509057329.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:29.570Z,1509057329.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:29.606Z,1509057329.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:29.969Z,1509057329.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:30.001Z,1509057330.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:30.381Z,1509057330.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:30.417Z,1509057330.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:30.780Z,1509057330.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:30.816Z,1509057330.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:31.181Z,1509057331.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:31.216Z,1509057331.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:31.576Z,1509057331.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:31.618Z,1509057331.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:32.195Z,1509057332.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:32.233Z,1509057332.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:32.569Z,1509057332.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:32.647Z,1509057332.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:32.984Z,1509057332.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:33.021Z,1509057333.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:33.392Z,1509057333.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:33.445Z,1509057333.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:33.772Z,1509057333.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:33.846Z,1509057333.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:34.194Z,1509057334.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:34.227Z,1509057334.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:34.582Z,1509057334.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:34.631Z,1509057334.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:34.982Z,1509057334.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:35.036Z,1509057335.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:35.376Z,1509057335.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:35.436Z,1509057335.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:35.778Z,1509057335.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:35.837Z,1509057335.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:36.183Z,1509057336.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:36.209Z,1509057336.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:36.572Z,1509057336.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:36.605Z,1509057336.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:37.026Z,1509057337.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:37.062Z,1509057337.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:37.384Z,1509057337.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:37.418Z,1509057337.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:37.779Z,1509057337.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:37.808Z,1509057337.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:38.195Z,1509057338.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:38.242Z,1509057338.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:38.569Z,1509057338.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:38.613Z,1509057338.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:39.020Z,1509057339.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:39.066Z,1509057339.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:39.384Z,1509057339.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:39.413Z,1509057339.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:39.781Z,1509057339.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:39.831Z,1509057339.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:40.181Z,1509057340.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:40.221Z,1509057340.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:40.574Z,1509057340.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:40.607Z,1509057340.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:41.021Z,1509057341.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:41.057Z,1509057341.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:41.366Z,1509057341.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:41.417Z,1509057341.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:41.773Z,1509057341.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:41.813Z,1509057341.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:42.173Z,1509057342.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:42.214Z,1509057342.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:42.579Z,1509057342.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:42.607Z,1509057342.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:43.016Z,1509057343.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:43.057Z,1509057343.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:43.369Z,1509057343.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:43.404Z,1509057343.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:43.775Z,1509057343.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:43.819Z,1509057343.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:44.183Z,1509057344.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:44.199Z,1509057344.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:44.584Z,1509057344.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:44.630Z,1509057344.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:44.986Z,1509057344.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:45.097Z,1509057345.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:45.370Z,1509057345.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:45.415Z,1509057345.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:45.765Z,1509057345.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:45.805Z,1509057345.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:46.204Z,1509057346.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:46.265Z,1509057346.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:46.604Z,1509057346.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:46.673Z,1509057346.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:46.968Z,1509057346.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:47.014Z,1509057347.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:47.401Z,1509057347.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:47.426Z,1509057347.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:47.775Z,1509057347.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:47.821Z,1509057347.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:48.175Z,1509057348.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:48.240Z,1509057348.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:48.585Z,1509057348.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:48.620Z,1509057348.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:48.984Z,1509057348.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:49.034Z,1509057349.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:49.390Z,1509057349.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:49.436Z,1509057349.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:49.795Z,1509057349.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:49.821Z,1509057349.821 [PNI_TCM](ERROR): CRC does not match. Expected:0x64150 got:0x42051
2017-10-26T22:35:49.883Z,1509057349.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:50.189Z,1509057350.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:50.239Z,1509057350.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:50.583Z,1509057350.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:50.622Z,1509057350.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:50.966Z,1509057350.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:51.008Z,1509057351.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:51.397Z,1509057351.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:51.456Z,1509057351.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:51.774Z,1509057351.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:51.825Z,1509057351.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:52.190Z,1509057352.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:52.219Z,1509057352.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:52.571Z,1509057352.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:52.620Z,1509057352.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:52.982Z,1509057352.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:53.026Z,1509057353.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:53.377Z,1509057353.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:53.418Z,1509057353.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:53.781Z,1509057353.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:53.814Z,1509057353.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:54.174Z,1509057354.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:54.215Z,1509057354.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:54.569Z,1509057354.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:54.608Z,1509057354.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:55.029Z,1509057355.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:55.066Z,1509057355.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:55.374Z,1509057355.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:55.406Z,1509057355.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:55.774Z,1509057355.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:55.851Z,1509057355.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:56.354Z,1509057356.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:56.394Z,1509057356.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:56.761Z,1509057356.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:56.789Z,1509057356.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:57.173Z,1509057357.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:57.206Z,1509057357.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:57.573Z,1509057357.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:57.609Z,1509057357.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:57.956Z,1509057357.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:57.997Z,1509057357.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:58.357Z,1509057358.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:58.385Z,1509057358.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:58.764Z,1509057358.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:58.796Z,1509057358.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:59.167Z,1509057359.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:59.185Z,1509057359.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:59.565Z,1509057359.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:59.607Z,1509057359.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:35:59.972Z,1509057359.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:35:59.995Z,1509057359.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:00.374Z,1509057360.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:00.395Z,1509057360.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:00.765Z,1509057360.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:00.786Z,1509057360.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:01.167Z,1509057361.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:01.197Z,1509057361.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:01.562Z,1509057361.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:01.600Z,1509057361.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:01.972Z,1509057361.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:02.025Z,1509057362.025 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:02.025Z,1509057362.025 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 56
2017-10-26T22:36:02.025Z,1509057362.025 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:36:02.046Z,1509057362.046 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:02.046Z,1509057362.046 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 56
2017-10-26T22:36:02.046Z,1509057362.046 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:36:02.109Z,1509057362.109 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:36:02.109Z,1509057362.109 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:36:02.371Z,1509057362.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:02.481Z,1509057362.481 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:36:02.481Z,1509057362.481 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 56
2017-10-26T22:36:02.482Z,1509057362.482 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:36:02.482Z,1509057362.482 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 56
2017-10-26T22:36:02.768Z,1509057362.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:02.784Z,1509057362.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:36:02.785Z,1509057362.785 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:36:02.785Z,1509057362.785 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:36:02.788Z,1509057362.788 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:36:02.788Z,1509057362.788 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:36:02.789Z,1509057362.789 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:36:03.186Z,1509057363.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:03.236Z,1509057363.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:03.561Z,1509057363.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:03.594Z,1509057363.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:03.964Z,1509057363.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:04.038Z,1509057364.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:04.366Z,1509057364.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:04.421Z,1509057364.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:04.769Z,1509057364.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:04.784Z,1509057364.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:05.167Z,1509057365.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:05.184Z,1509057365.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:05.566Z,1509057365.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:05.587Z,1509057365.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:05.970Z,1509057365.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:05.987Z,1509057365.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:06.379Z,1509057366.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:06.396Z,1509057366.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:06.764Z,1509057366.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:06.802Z,1509057366.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:07.179Z,1509057367.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:07.195Z,1509057367.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:07.605Z,1509057367.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:07.664Z,1509057367.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:07.971Z,1509057367.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:07.992Z,1509057367.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:08.372Z,1509057368.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:08.389Z,1509057368.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:08.783Z,1509057368.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:08.826Z,1509057368.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:09.163Z,1509057369.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:09.196Z,1509057369.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:09.589Z,1509057369.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:09.700Z,1509057369.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:09.969Z,1509057369.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:10.012Z,1509057370.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:10.367Z,1509057370.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:10.383Z,1509057370.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:10.763Z,1509057370.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:10.781Z,1509057370.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:11.183Z,1509057371.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:11.218Z,1509057371.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:11.573Z,1509057371.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:11.589Z,1509057371.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:11.965Z,1509057371.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:11.981Z,1509057371.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:12.377Z,1509057372.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:12.394Z,1509057372.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:12.773Z,1509057372.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:12.790Z,1509057372.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:13.157Z,1509057373.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:13.203Z,1509057373.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:13.560Z,1509057373.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:13.592Z,1509057373.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:13.967Z,1509057373.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:13.991Z,1509057373.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:14.377Z,1509057374.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:14.410Z,1509057374.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:14.764Z,1509057374.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:14.788Z,1509057374.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:15.191Z,1509057375.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:15.220Z,1509057375.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:15.571Z,1509057375.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:15.593Z,1509057375.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:15.974Z,1509057375.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:16.039Z,1509057376.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:16.359Z,1509057376.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:16.431Z,1509057376.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:16.770Z,1509057376.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:16.795Z,1509057376.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:17.161Z,1509057377.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:17.231Z,1509057377.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:17.561Z,1509057377.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:17.589Z,1509057377.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:17.966Z,1509057377.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:18.025Z,1509057378.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:18.361Z,1509057378.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:18.414Z,1509057378.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:18.899Z,1509057378.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:18.915Z,1509057378.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:19.311Z,1509057379.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:19.386Z,1509057379.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:19.689Z,1509057379.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:19.705Z,1509057379.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:20.090Z,1509057380.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:20.145Z,1509057380.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:20.494Z,1509057380.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:20.511Z,1509057380.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:20.895Z,1509057380.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:20.911Z,1509057380.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:21.280Z,1509057381.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:21.317Z,1509057381.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:21.683Z,1509057381.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:21.708Z,1509057381.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:22.083Z,1509057382.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:22.113Z,1509057382.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:22.481Z,1509057382.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:22.505Z,1509057382.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:22.891Z,1509057382.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:22.908Z,1509057382.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:23.289Z,1509057383.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:23.305Z,1509057383.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:23.695Z,1509057383.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:23.711Z,1509057383.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:24.097Z,1509057384.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:24.145Z,1509057384.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:24.505Z,1509057384.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:24.523Z,1509057384.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:24.885Z,1509057384.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:25.008Z,1509057385.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:25.281Z,1509057385.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:25.298Z,1509057385.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:25.688Z,1509057385.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:25.724Z,1509057385.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:26.096Z,1509057386.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:26.151Z,1509057386.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:26.458Z,1509057386.458 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:36:26.499Z,1509057386.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:26.516Z,1509057386.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:26.918Z,1509057386.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:27.004Z,1509057387.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:27.287Z,1509057387.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:27.304Z,1509057387.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:27.681Z,1509057387.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:27.705Z,1509057387.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:28.094Z,1509057388.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:28.144Z,1509057388.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:28.479Z,1509057388.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:28.518Z,1509057388.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:28.880Z,1509057388.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:28.912Z,1509057388.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:29.283Z,1509057389.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:29.312Z,1509057389.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:29.689Z,1509057389.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:29.706Z,1509057389.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:30.092Z,1509057390.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:30.151Z,1509057390.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:30.495Z,1509057390.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:30.558Z,1509057390.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:30.877Z,1509057390.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:30.996Z,1509057390.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:31.284Z,1509057391.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:31.323Z,1509057391.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:31.683Z,1509057391.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:31.716Z,1509057391.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:32.080Z,1509057392.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:32.164Z,1509057392.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:32.487Z,1509057392.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:32.503Z,1509057392.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:32.888Z,1509057392.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:33.015Z,1509057393.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:33.296Z,1509057393.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:33.313Z,1509057393.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:33.690Z,1509057393.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:33.762Z,1509057393.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:34.086Z,1509057394.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:34.156Z,1509057394.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:34.483Z,1509057394.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:34.507Z,1509057394.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:34.888Z,1509057394.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:34.998Z,1509057394.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:35.289Z,1509057395.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:35.333Z,1509057395.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:35.691Z,1509057395.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:35.707Z,1509057395.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:36.077Z,1509057396.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:36.110Z,1509057396.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:36.489Z,1509057396.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:36.505Z,1509057396.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:36.890Z,1509057396.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:36.912Z,1509057396.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:37.279Z,1509057397.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:37.318Z,1509057397.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:37.684Z,1509057397.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:37.712Z,1509057397.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:38.090Z,1509057398.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:38.146Z,1509057398.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:38.496Z,1509057398.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:38.512Z,1509057398.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:38.888Z,1509057398.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:38.906Z,1509057398.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:39.311Z,1509057399.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:39.361Z,1509057399.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:39.679Z,1509057399.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:39.708Z,1509057399.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:40.100Z,1509057400.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:40.152Z,1509057400.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:40.480Z,1509057400.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:40.517Z,1509057400.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:40.877Z,1509057400.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:40.894Z,1509057400.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:41.284Z,1509057401.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:41.321Z,1509057401.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:41.694Z,1509057401.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:41.726Z,1509057401.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:42.084Z,1509057402.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:42.146Z,1509057402.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:42.496Z,1509057402.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:42.516Z,1509057402.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:42.891Z,1509057402.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:42.907Z,1509057402.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:43.291Z,1509057403.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:43.308Z,1509057403.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:43.698Z,1509057403.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:43.722Z,1509057403.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:44.080Z,1509057404.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:44.110Z,1509057404.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:44.479Z,1509057404.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:44.509Z,1509057404.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:44.887Z,1509057404.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:44.994Z,1509057404.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:45.278Z,1509057405.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:45.307Z,1509057405.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:45.681Z,1509057405.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:45.745Z,1509057405.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:46.082Z,1509057406.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:46.151Z,1509057406.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:46.488Z,1509057406.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:46.512Z,1509057406.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:46.884Z,1509057406.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:46.967Z,1509057406.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:47.289Z,1509057407.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:47.361Z,1509057407.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:47.676Z,1509057407.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:47.697Z,1509057407.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:48.084Z,1509057408.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:48.166Z,1509057408.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:48.488Z,1509057408.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:48.545Z,1509057408.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:48.952Z,1509057408.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:48.975Z,1509057408.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:49.299Z,1509057409.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:49.319Z,1509057409.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:49.686Z,1509057409.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:49.710Z,1509057409.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:50.081Z,1509057410.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:50.098Z,1509057410.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:50.493Z,1509057410.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:50.523Z,1509057410.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:50.926Z,1509057410.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:50.975Z,1509057410.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:51.278Z,1509057411.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:51.330Z,1509057411.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:51.685Z,1509057411.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:51.701Z,1509057411.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:52.084Z,1509057412.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:52.101Z,1509057412.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:52.488Z,1509057412.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:52.508Z,1509057412.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:52.926Z,1509057412.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:52.970Z,1509057412.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:53.281Z,1509057413.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:53.298Z,1509057413.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:53.685Z,1509057413.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:53.701Z,1509057413.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:54.087Z,1509057414.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:54.104Z,1509057414.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:54.491Z,1509057414.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:54.507Z,1509057414.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:54.908Z,1509057414.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:54.973Z,1509057414.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:55.283Z,1509057415.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:55.300Z,1509057415.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:55.686Z,1509057415.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:55.706Z,1509057415.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:56.089Z,1509057416.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:56.146Z,1509057416.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:56.491Z,1509057416.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:56.508Z,1509057416.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:56.931Z,1509057416.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:56.968Z,1509057416.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:57.284Z,1509057417.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:57.308Z,1509057417.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:57.692Z,1509057417.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:57.717Z,1509057417.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:58.087Z,1509057418.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:58.104Z,1509057418.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:58.494Z,1509057418.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:58.511Z,1509057418.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:58.946Z,1509057418.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:58.993Z,1509057418.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:59.283Z,1509057419.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:59.299Z,1509057419.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:36:59.692Z,1509057419.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:36:59.733Z,1509057419.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:00.085Z,1509057420.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:00.121Z,1509057420.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:00.478Z,1509057420.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:00.591Z,1509057420.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:00.889Z,1509057420.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:00.987Z,1509057420.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:01.295Z,1509057421.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:01.365Z,1509057421.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:01.706Z,1509057421.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:01.730Z,1509057421.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:02.080Z,1509057422.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:02.156Z,1509057422.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:02.475Z,1509057422.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:02.521Z,1509057422.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:02.928Z,1509057422.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:02.971Z,1509057422.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:03.293Z,1509057423.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:03.323Z,1509057423.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:03.680Z,1509057423.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:03.711Z,1509057423.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:04.085Z,1509057424.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:04.147Z,1509057424.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:04.479Z,1509057424.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:04.495Z,1509057424.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:04.921Z,1509057424.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:04.981Z,1509057424.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:05.286Z,1509057425.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:05.307Z,1509057425.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:05.678Z,1509057425.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:05.707Z,1509057425.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:06.086Z,1509057426.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:06.113Z,1509057426.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:06.493Z,1509057426.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:06.510Z,1509057426.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:06.934Z,1509057426.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:06.992Z,1509057426.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:07.278Z,1509057427.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:07.331Z,1509057427.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:07.872Z,1509057427.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:07.901Z,1509057427.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:08.258Z,1509057428.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:08.274Z,1509057428.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:08.665Z,1509057428.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:08.688Z,1509057428.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:09.066Z,1509057429.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:09.098Z,1509057429.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:09.463Z,1509057429.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:09.482Z,1509057429.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:09.854Z,1509057429.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:09.903Z,1509057429.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:10.248Z,1509057430.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:10.301Z,1509057430.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:10.647Z,1509057430.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:10.719Z,1509057430.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:11.059Z,1509057431.059 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:11.075Z,1509057431.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:11.459Z,1509057431.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:11.475Z,1509057431.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:11.870Z,1509057431.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:11.933Z,1509057431.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:12.258Z,1509057432.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:12.276Z,1509057432.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:12.660Z,1509057432.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:12.691Z,1509057432.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:13.047Z,1509057433.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:13.078Z,1509057433.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:13.469Z,1509057433.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:13.491Z,1509057433.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:13.848Z,1509057433.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:13.857Z,1509057433.857 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T22:37:13.857Z,1509057433.857 [BPC1] Data Fault, FailCount= 1
2017-10-26T22:37:13.857Z,1509057433.857 [BPC1](ERROR): Data Fault
2017-10-26T22:37:13.896Z,1509057433.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:14.015Z,1509057434.015 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T22:37:14.264Z,1509057434.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:14.293Z,1509057434.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:14.662Z,1509057434.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:14.694Z,1509057434.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:15.051Z,1509057435.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:15.097Z,1509057435.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:15.201Z,1509057435.201 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:37:15.201Z,1509057435.201 [BPC1] No Fault, FailCount= 1
2017-10-26T22:37:15.452Z,1509057435.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:15.540Z,1509057435.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:15.861Z,1509057435.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:15.879Z,1509057435.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:16.256Z,1509057436.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:16.303Z,1509057436.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:16.653Z,1509057436.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:16.680Z,1509057436.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:17.069Z,1509057437.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:17.088Z,1509057437.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:17.450Z,1509057437.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:17.495Z,1509057437.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:17.849Z,1509057437.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:17.878Z,1509057437.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:18.259Z,1509057438.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:18.287Z,1509057438.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:18.656Z,1509057438.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:18.695Z,1509057438.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:19.064Z,1509057439.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:19.110Z,1509057439.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:19.465Z,1509057439.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:19.488Z,1509057439.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:19.856Z,1509057439.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:19.876Z,1509057439.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:20.257Z,1509057440.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:20.282Z,1509057440.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:20.651Z,1509057440.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:20.681Z,1509057440.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:21.072Z,1509057441.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:21.096Z,1509057441.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:21.452Z,1509057441.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:21.491Z,1509057441.491 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:21.853Z,1509057441.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:21.891Z,1509057441.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:22.255Z,1509057442.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:22.297Z,1509057442.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:22.644Z,1509057442.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:22.660Z,1509057442.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:23.054Z,1509057443.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:23.095Z,1509057443.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:23.463Z,1509057443.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:23.511Z,1509057443.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:23.857Z,1509057443.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:23.909Z,1509057443.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:24.264Z,1509057444.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:24.297Z,1509057444.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:24.663Z,1509057444.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:24.684Z,1509057444.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:25.077Z,1509057445.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:25.144Z,1509057445.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:25.455Z,1509057445.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:25.479Z,1509057445.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:25.858Z,1509057445.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:25.884Z,1509057445.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:26.257Z,1509057446.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:26.294Z,1509057446.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:26.627Z,1509057446.627 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:37:26.666Z,1509057446.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:26.675Z,1509057446.675 [BPC1](ERROR): Failed to parse message.
2017-10-26T22:37:26.675Z,1509057446.675 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T22:37:26.675Z,1509057446.675 [BPC1] Data Fault, FailCount= 2
2017-10-26T22:37:26.675Z,1509057446.675 [BPC1](ERROR): Data Fault
2017-10-26T22:37:26.707Z,1509057446.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:26.818Z,1509057446.818 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T22:37:27.062Z,1509057447.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:27.095Z,1509057447.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:27.701Z,1509057447.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:27.758Z,1509057447.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:28.096Z,1509057448.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:28.153Z,1509057448.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:28.270Z,1509057448.270 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:37:28.270Z,1509057448.270 [BPC1] No Fault, FailCount= 2
2017-10-26T22:37:28.499Z,1509057448.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:28.587Z,1509057448.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:28.911Z,1509057448.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:29.012Z,1509057449.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:29.284Z,1509057449.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:29.317Z,1509057449.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:29.687Z,1509057449.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:29.745Z,1509057449.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:30.087Z,1509057450.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:30.156Z,1509057450.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:30.488Z,1509057450.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:30.529Z,1509057450.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:30.952Z,1509057450.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:30.998Z,1509057450.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:31.296Z,1509057451.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:31.312Z,1509057451.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:31.694Z,1509057451.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:31.710Z,1509057451.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:32.094Z,1509057452.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:32.111Z,1509057452.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:32.487Z,1509057452.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:32.516Z,1509057452.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:32.954Z,1509057452.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:32.998Z,1509057452.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:33.295Z,1509057453.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:33.341Z,1509057453.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:33.689Z,1509057453.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:33.706Z,1509057453.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:34.089Z,1509057454.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:34.142Z,1509057454.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:34.498Z,1509057454.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:34.527Z,1509057454.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:34.945Z,1509057454.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:34.986Z,1509057454.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:35.301Z,1509057455.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:35.343Z,1509057455.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:35.694Z,1509057455.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:35.712Z,1509057455.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:36.095Z,1509057456.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:36.115Z,1509057456.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:36.493Z,1509057456.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:36.518Z,1509057456.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:36.891Z,1509057456.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:36.999Z,1509057456.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:37.307Z,1509057457.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:37.349Z,1509057457.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:37.704Z,1509057457.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:37.720Z,1509057457.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:38.098Z,1509057458.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:38.153Z,1509057458.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:38.501Z,1509057458.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:38.518Z,1509057458.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:39.009Z,1509057459.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:39.048Z,1509057459.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:39.415Z,1509057459.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:39.438Z,1509057459.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:39.798Z,1509057459.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:39.834Z,1509057459.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:40.229Z,1509057460.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:40.245Z,1509057460.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:40.606Z,1509057460.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:40.666Z,1509057460.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:41.015Z,1509057461.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:41.050Z,1509057461.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:41.407Z,1509057461.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:41.476Z,1509057461.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:41.819Z,1509057461.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:41.840Z,1509057461.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:42.206Z,1509057462.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:42.239Z,1509057462.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:42.618Z,1509057462.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:42.673Z,1509057462.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:43.005Z,1509057463.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:43.036Z,1509057463.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:43.414Z,1509057463.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:43.503Z,1509057463.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:43.802Z,1509057463.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:43.857Z,1509057463.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:44.203Z,1509057464.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:44.231Z,1509057464.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:44.610Z,1509057464.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:44.638Z,1509057464.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:45.009Z,1509057465.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:45.047Z,1509057465.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:45.410Z,1509057465.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:45.439Z,1509057465.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:45.820Z,1509057465.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:45.837Z,1509057465.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:46.208Z,1509057466.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:46.236Z,1509057466.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:46.605Z,1509057466.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:46.638Z,1509057466.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:47.005Z,1509057467.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:47.042Z,1509057467.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:47.414Z,1509057467.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:47.440Z,1509057467.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:47.807Z,1509057467.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:47.841Z,1509057467.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:48.219Z,1509057468.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:48.247Z,1509057468.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:48.618Z,1509057468.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:48.639Z,1509057468.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:49.015Z,1509057469.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:49.036Z,1509057469.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:49.410Z,1509057469.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:49.439Z,1509057469.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:49.805Z,1509057469.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:49.836Z,1509057469.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:50.218Z,1509057470.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:50.247Z,1509057470.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:50.613Z,1509057470.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:50.646Z,1509057470.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:51.032Z,1509057471.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:51.049Z,1509057471.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:51.416Z,1509057471.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:51.453Z,1509057471.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:51.815Z,1509057471.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:51.836Z,1509057471.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:52.213Z,1509057472.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:52.229Z,1509057472.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:52.618Z,1509057472.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:52.657Z,1509057472.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:53.017Z,1509057473.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:53.038Z,1509057473.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:53.413Z,1509057473.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:53.431Z,1509057473.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:53.946Z,1509057473.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:53.979Z,1509057473.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:54.343Z,1509057474.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:54.400Z,1509057474.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:54.745Z,1509057474.745 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:54.770Z,1509057474.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:55.165Z,1509057475.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:55.247Z,1509057475.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:55.547Z,1509057475.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:55.570Z,1509057475.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:55.942Z,1509057475.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:56.010Z,1509057476.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:56.348Z,1509057476.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:56.373Z,1509057476.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:56.739Z,1509057476.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:56.810Z,1509057476.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:57.172Z,1509057477.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:57.189Z,1509057477.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:57.548Z,1509057477.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:57.604Z,1509057477.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:57.944Z,1509057477.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:58.001Z,1509057478.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:58.345Z,1509057478.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:58.361Z,1509057478.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:58.750Z,1509057478.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:58.788Z,1509057478.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:59.162Z,1509057479.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:59.197Z,1509057479.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:59.553Z,1509057479.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:59.570Z,1509057479.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:37:59.936Z,1509057479.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:37:59.985Z,1509057479.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:00.365Z,1509057480.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:00.389Z,1509057480.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:00.744Z,1509057480.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:00.795Z,1509057480.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:01.154Z,1509057481.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:01.191Z,1509057481.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:01.542Z,1509057481.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:01.575Z,1509057481.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:01.939Z,1509057481.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:01.970Z,1509057481.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:02.331Z,1509057482.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:02.355Z,1509057482.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:02.737Z,1509057482.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:02.783Z,1509057482.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:03.178Z,1509057483.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:03.194Z,1509057483.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:03.548Z,1509057483.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:03.565Z,1509057483.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:03.949Z,1509057483.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:03.966Z,1509057483.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:04.350Z,1509057484.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:04.366Z,1509057484.366 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:04.754Z,1509057484.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:04.770Z,1509057484.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:05.165Z,1509057485.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:05.190Z,1509057485.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:05.546Z,1509057485.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:05.563Z,1509057485.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:05.962Z,1509057485.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:05.997Z,1509057485.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:06.349Z,1509057486.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:06.367Z,1509057486.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:06.734Z,1509057486.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:06.765Z,1509057486.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:07.181Z,1509057487.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:07.206Z,1509057487.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:07.548Z,1509057487.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:07.582Z,1509057487.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:07.952Z,1509057487.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:07.989Z,1509057487.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:08.352Z,1509057488.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:08.369Z,1509057488.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:08.746Z,1509057488.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:08.810Z,1509057488.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:09.169Z,1509057489.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:09.186Z,1509057489.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:09.551Z,1509057489.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:09.568Z,1509057489.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:09.939Z,1509057489.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:09.986Z,1509057489.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:10.344Z,1509057490.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:10.432Z,1509057490.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:10.744Z,1509057490.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:10.773Z,1509057490.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:11.167Z,1509057491.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:11.184Z,1509057491.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:11.540Z,1509057491.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:11.588Z,1509057491.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:11.940Z,1509057491.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:11.966Z,1509057491.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:12.347Z,1509057492.347 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:12.431Z,1509057492.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:12.750Z,1509057492.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:12.804Z,1509057492.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:13.162Z,1509057493.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:13.179Z,1509057493.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:13.537Z,1509057493.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:13.576Z,1509057493.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:13.941Z,1509057493.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:13.965Z,1509057493.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:14.350Z,1509057494.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:14.374Z,1509057494.374 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:14.747Z,1509057494.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:14.777Z,1509057494.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:15.164Z,1509057495.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:15.192Z,1509057495.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:15.546Z,1509057495.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:15.562Z,1509057495.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:15.947Z,1509057495.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:15.963Z,1509057495.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:16.360Z,1509057496.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:16.401Z,1509057496.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:16.974Z,1509057496.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:17.037Z,1509057497.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:17.370Z,1509057497.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:17.404Z,1509057497.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:17.754Z,1509057497.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:17.796Z,1509057497.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:18.163Z,1509057498.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:18.193Z,1509057498.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:18.562Z,1509057498.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:18.592Z,1509057498.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:19.001Z,1509057499.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:19.042Z,1509057499.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:19.363Z,1509057499.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:19.401Z,1509057499.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:19.759Z,1509057499.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:19.819Z,1509057499.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:20.170Z,1509057500.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:20.200Z,1509057500.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:20.554Z,1509057500.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:20.594Z,1509057500.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:21.000Z,1509057501.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:21.033Z,1509057501.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:21.364Z,1509057501.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:21.416Z,1509057501.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:21.779Z,1509057501.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:21.809Z,1509057501.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:22.178Z,1509057502.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:22.208Z,1509057502.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:22.557Z,1509057502.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:22.609Z,1509057502.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:22.980Z,1509057502.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:23.037Z,1509057503.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:23.365Z,1509057503.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:23.421Z,1509057503.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:23.765Z,1509057503.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:23.802Z,1509057503.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:24.179Z,1509057504.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:24.209Z,1509057504.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:24.559Z,1509057504.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:24.596Z,1509057504.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:24.962Z,1509057504.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:25.055Z,1509057505.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:25.370Z,1509057505.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:25.394Z,1509057505.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:25.775Z,1509057505.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:25.829Z,1509057505.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:26.176Z,1509057506.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:26.226Z,1509057506.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:26.555Z,1509057506.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:26.622Z,1509057506.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:26.936Z,1509057506.936 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:38:26.959Z,1509057506.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:27.035Z,1509057507.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:27.356Z,1509057507.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:27.408Z,1509057507.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:27.765Z,1509057507.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:27.803Z,1509057507.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:28.165Z,1509057508.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:28.184Z,1509057508.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:28.569Z,1509057508.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:28.603Z,1509057508.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:28.966Z,1509057508.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:29.031Z,1509057509.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:29.391Z,1509057509.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:29.420Z,1509057509.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:29.766Z,1509057509.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:29.802Z,1509057509.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:30.170Z,1509057510.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:30.199Z,1509057510.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:30.565Z,1509057510.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:30.589Z,1509057510.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:30.975Z,1509057510.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:31.029Z,1509057511.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:31.364Z,1509057511.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:31.388Z,1509057511.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:31.764Z,1509057511.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:31.793Z,1509057511.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:32.183Z,1509057512.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:32.199Z,1509057512.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:32.576Z,1509057512.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:32.626Z,1509057512.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:33.012Z,1509057513.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:33.062Z,1509057513.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:33.377Z,1509057513.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:33.416Z,1509057513.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:33.764Z,1509057513.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:33.812Z,1509057513.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:34.186Z,1509057514.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:34.229Z,1509057514.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:34.567Z,1509057514.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:34.584Z,1509057514.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:35.011Z,1509057515.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:35.073Z,1509057515.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:35.367Z,1509057515.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:35.407Z,1509057515.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:35.754Z,1509057515.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:35.784Z,1509057515.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:36.160Z,1509057516.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:36.188Z,1509057516.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:36.557Z,1509057516.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:36.594Z,1509057516.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:36.968Z,1509057516.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:37.025Z,1509057517.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:37.370Z,1509057517.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:37.424Z,1509057517.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:37.764Z,1509057517.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:37.837Z,1509057517.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:38.168Z,1509057518.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:38.193Z,1509057518.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:38.575Z,1509057518.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:38.595Z,1509057518.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:38.985Z,1509057518.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:39.053Z,1509057519.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:39.368Z,1509057519.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:39.386Z,1509057519.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:39.776Z,1509057519.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:39.819Z,1509057519.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:40.167Z,1509057520.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:40.238Z,1509057520.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:40.576Z,1509057520.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:40.627Z,1509057520.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:41.012Z,1509057521.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:41.086Z,1509057521.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:41.364Z,1509057521.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:41.455Z,1509057521.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:41.764Z,1509057521.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:41.804Z,1509057521.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:42.167Z,1509057522.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:42.201Z,1509057522.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:42.573Z,1509057522.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:42.601Z,1509057522.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:43.025Z,1509057523.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:43.076Z,1509057523.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:43.359Z,1509057523.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:43.395Z,1509057523.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:43.760Z,1509057523.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:43.818Z,1509057523.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:44.180Z,1509057524.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:44.208Z,1509057524.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:44.568Z,1509057524.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:44.604Z,1509057524.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:44.961Z,1509057524.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:45.022Z,1509057525.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:45.360Z,1509057525.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:45.533Z,1509057525.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:45.766Z,1509057525.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:45.815Z,1509057525.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:46.168Z,1509057526.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:46.192Z,1509057526.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:46.589Z,1509057526.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:46.629Z,1509057526.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:46.970Z,1509057526.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:47.024Z,1509057527.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:47.357Z,1509057527.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:47.399Z,1509057527.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:47.763Z,1509057527.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:47.792Z,1509057527.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:48.163Z,1509057528.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:48.211Z,1509057528.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:48.556Z,1509057528.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:48.588Z,1509057528.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:48.964Z,1509057528.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:49.021Z,1509057529.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:49.358Z,1509057529.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:49.406Z,1509057529.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:49.753Z,1509057529.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:49.799Z,1509057529.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:50.174Z,1509057530.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:50.198Z,1509057530.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:50.566Z,1509057530.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:50.603Z,1509057530.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:50.974Z,1509057530.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:51.023Z,1509057531.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:51.381Z,1509057531.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:51.414Z,1509057531.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:51.774Z,1509057531.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:51.828Z,1509057531.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:52.159Z,1509057532.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:52.238Z,1509057532.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:52.564Z,1509057532.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:52.597Z,1509057532.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:52.982Z,1509057532.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:53.013Z,1509057533.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:53.376Z,1509057533.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:53.460Z,1509057533.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:53.777Z,1509057533.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:53.814Z,1509057533.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:54.174Z,1509057534.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:54.241Z,1509057534.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:54.555Z,1509057534.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:54.593Z,1509057534.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:54.959Z,1509057534.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:55.041Z,1509057535.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:55.354Z,1509057535.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:55.403Z,1509057535.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:55.759Z,1509057535.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:55.815Z,1509057535.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:56.169Z,1509057536.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:56.207Z,1509057536.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:56.559Z,1509057536.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:56.604Z,1509057536.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:56.979Z,1509057536.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:57.030Z,1509057537.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:57.354Z,1509057537.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:57.392Z,1509057537.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:57.754Z,1509057537.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:57.819Z,1509057537.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:58.173Z,1509057538.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:58.204Z,1509057538.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:58.563Z,1509057538.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:58.579Z,1509057538.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:59.020Z,1509057539.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:59.060Z,1509057539.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:59.355Z,1509057539.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:59.412Z,1509057539.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:38:59.757Z,1509057539.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:38:59.828Z,1509057539.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:00.169Z,1509057540.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:00.189Z,1509057540.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:00.574Z,1509057540.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:00.609Z,1509057540.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:01.026Z,1509057541.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:01.063Z,1509057541.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:01.360Z,1509057541.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:01.396Z,1509057541.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:01.757Z,1509057541.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:01.786Z,1509057541.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:02.189Z,1509057542.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:02.205Z,1509057542.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:02.565Z,1509057542.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:02.599Z,1509057542.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:02.973Z,1509057542.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:03.016Z,1509057543.016 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:03.017Z,1509057543.017 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 57
2017-10-26T22:39:03.017Z,1509057543.017 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:39:03.021Z,1509057543.021 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:03.021Z,1509057543.021 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 57
2017-10-26T22:39:03.021Z,1509057543.021 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:39:03.134Z,1509057543.134 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:39:03.135Z,1509057543.135 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:39:03.378Z,1509057543.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:03.478Z,1509057543.478 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:39:03.479Z,1509057543.479 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 57
2017-10-26T22:39:03.479Z,1509057543.479 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:39:03.479Z,1509057543.479 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 57
2017-10-26T22:39:03.773Z,1509057543.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:03.796Z,1509057543.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:39:03.805Z,1509057543.805 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:39:03.805Z,1509057543.805 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:39:03.808Z,1509057543.808 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:39:03.808Z,1509057543.808 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:39:03.813Z,1509057543.813 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:39:04.166Z,1509057544.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:04.200Z,1509057544.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:04.567Z,1509057544.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:04.628Z,1509057544.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:05.014Z,1509057545.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:05.052Z,1509057545.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:05.371Z,1509057545.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:05.409Z,1509057545.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:05.782Z,1509057545.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:05.798Z,1509057545.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:06.175Z,1509057546.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:06.219Z,1509057546.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:06.552Z,1509057546.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:06.619Z,1509057546.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:07.008Z,1509057547.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:07.051Z,1509057547.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:07.372Z,1509057547.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:07.409Z,1509057547.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:07.757Z,1509057547.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:07.829Z,1509057547.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:08.175Z,1509057548.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:08.198Z,1509057548.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:08.691Z,1509057548.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:08.747Z,1509057548.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:09.110Z,1509057549.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:09.162Z,1509057549.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:09.504Z,1509057549.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:09.564Z,1509057549.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:09.895Z,1509057549.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:09.958Z,1509057549.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:10.288Z,1509057550.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:10.322Z,1509057550.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:10.685Z,1509057550.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:10.718Z,1509057550.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:11.095Z,1509057551.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:11.117Z,1509057551.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:11.505Z,1509057551.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:11.521Z,1509057551.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:11.904Z,1509057551.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:11.920Z,1509057551.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:12.306Z,1509057552.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:12.322Z,1509057552.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:12.686Z,1509057552.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:12.723Z,1509057552.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:13.096Z,1509057553.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:13.172Z,1509057553.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:13.499Z,1509057553.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:13.525Z,1509057553.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:13.890Z,1509057553.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:13.914Z,1509057553.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:14.297Z,1509057554.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:14.329Z,1509057554.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:14.690Z,1509057554.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:14.713Z,1509057554.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:15.100Z,1509057555.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:15.149Z,1509057555.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:15.500Z,1509057555.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:15.524Z,1509057555.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:15.889Z,1509057555.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:15.922Z,1509057555.922 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:16.282Z,1509057556.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:16.323Z,1509057556.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:16.694Z,1509057556.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:16.726Z,1509057556.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:17.099Z,1509057557.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:17.166Z,1509057557.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:17.501Z,1509057557.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:17.517Z,1509057557.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:17.911Z,1509057557.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:17.927Z,1509057557.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:18.326Z,1509057558.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:18.350Z,1509057558.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:18.871Z,1509057558.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:18.895Z,1509057558.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:19.286Z,1509057559.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:19.302Z,1509057559.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:19.670Z,1509057559.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:19.699Z,1509057559.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:20.062Z,1509057560.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:20.119Z,1509057560.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:20.473Z,1509057560.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:20.535Z,1509057560.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:20.865Z,1509057560.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:20.894Z,1509057560.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:21.266Z,1509057561.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:21.295Z,1509057561.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:21.664Z,1509057561.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:21.740Z,1509057561.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:22.069Z,1509057562.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:22.103Z,1509057562.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:22.474Z,1509057562.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:22.507Z,1509057562.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:22.872Z,1509057562.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:22.996Z,1509057562.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:23.278Z,1509057563.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:23.297Z,1509057563.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:23.672Z,1509057563.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:23.711Z,1509057563.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:24.066Z,1509057564.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:24.147Z,1509057564.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:24.463Z,1509057564.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:24.500Z,1509057564.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:24.865Z,1509057564.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:24.961Z,1509057564.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:25.278Z,1509057565.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:25.312Z,1509057565.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:25.673Z,1509057565.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:25.689Z,1509057565.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:26.077Z,1509057566.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:26.094Z,1509057566.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:26.478Z,1509057566.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:26.495Z,1509057566.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:26.909Z,1509057566.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:26.970Z,1509057566.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:27.238Z,1509057567.238 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:39:27.262Z,1509057567.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:27.308Z,1509057567.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:27.672Z,1509057567.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:27.688Z,1509057567.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:28.065Z,1509057568.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:28.083Z,1509057568.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:28.475Z,1509057568.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:28.492Z,1509057568.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:28.902Z,1509057568.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:28.965Z,1509057568.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:29.284Z,1509057569.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:29.341Z,1509057569.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:29.663Z,1509057569.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:29.700Z,1509057569.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:30.061Z,1509057570.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:30.102Z,1509057570.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:30.639Z,1509057570.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:30.677Z,1509057570.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:31.054Z,1509057571.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:31.071Z,1509057571.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:31.442Z,1509057571.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:31.479Z,1509057571.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:31.847Z,1509057571.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:31.875Z,1509057571.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:32.243Z,1509057572.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:32.290Z,1509057572.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:32.648Z,1509057572.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:32.663Z,1509057572.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:33.048Z,1509057573.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:33.069Z,1509057573.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:33.446Z,1509057573.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:33.486Z,1509057573.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:33.849Z,1509057573.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:33.877Z,1509057573.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:34.242Z,1509057574.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:34.280Z,1509057574.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:34.655Z,1509057574.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:34.744Z,1509057574.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:35.057Z,1509057575.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:35.100Z,1509057575.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:35.449Z,1509057575.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:35.480Z,1509057575.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:35.851Z,1509057575.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:35.925Z,1509057575.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:36.251Z,1509057576.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:36.296Z,1509057576.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:36.652Z,1509057576.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:36.668Z,1509057576.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:37.049Z,1509057577.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:37.114Z,1509057577.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:37.450Z,1509057577.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:37.509Z,1509057577.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:37.526Z,1509057577.526 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:G.Wait](INFO): Done Waiting.
2017-10-26T22:39:37.527Z,1509057577.527 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:G.Wait] Stopped
2017-10-26T22:39:37.527Z,1509057577.527 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:G.Wait](DEBUG): Uninitialize Wait Component.
2017-10-26T22:39:37.527Z,1509057577.527 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:H.] Running Loop=1
2017-10-26T22:39:37.527Z,1509057577.527 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:H.](INFO): Initializing BallastAndTrim.
2017-10-26T22:39:37.848Z,1509057577.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:37.947Z,1509057577.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:38.248Z,1509057578.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:38.319Z,1509057578.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:38.642Z,1509057578.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:38.680Z,1509057578.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:39.053Z,1509057579.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:39.081Z,1509057579.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:39.512Z,1509057579.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:39.565Z,1509057579.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:39.856Z,1509057579.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:39.873Z,1509057579.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:40.254Z,1509057580.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:40.274Z,1509057580.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:40.662Z,1509057580.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:40.699Z,1509057580.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:41.067Z,1509057581.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:41.124Z,1509057581.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:41.444Z,1509057581.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:41.477Z,1509057581.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:41.847Z,1509057581.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:41.879Z,1509057581.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:42.243Z,1509057582.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:42.259Z,1509057582.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:42.658Z,1509057582.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:42.693Z,1509057582.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:43.053Z,1509057583.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:43.069Z,1509057583.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:43.441Z,1509057583.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:43.497Z,1509057583.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:43.846Z,1509057583.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:43.887Z,1509057583.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:44.246Z,1509057584.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:44.286Z,1509057584.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:44.659Z,1509057584.659 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:44.686Z,1509057584.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:45.054Z,1509057585.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:45.070Z,1509057585.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:45.458Z,1509057585.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:45.475Z,1509057585.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:45.859Z,1509057585.859 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:45.875Z,1509057585.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:46.261Z,1509057586.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:46.277Z,1509057586.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:46.644Z,1509057586.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:46.690Z,1509057586.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:47.042Z,1509057587.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:47.079Z,1509057587.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:47.459Z,1509057587.459 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:47.497Z,1509057587.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:47.851Z,1509057587.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:47.868Z,1509057587.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:48.250Z,1509057588.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:48.267Z,1509057588.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:48.660Z,1509057588.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:48.716Z,1509057588.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:49.045Z,1509057589.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:49.077Z,1509057589.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:49.446Z,1509057589.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:49.471Z,1509057589.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:49.851Z,1509057589.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:49.886Z,1509057589.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:50.250Z,1509057590.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:50.266Z,1509057590.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:50.655Z,1509057590.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:50.770Z,1509057590.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:51.042Z,1509057591.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:51.083Z,1509057591.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:51.453Z,1509057591.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:51.536Z,1509057591.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:51.851Z,1509057591.851 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:51.884Z,1509057591.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:52.258Z,1509057592.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:52.311Z,1509057592.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:52.652Z,1509057592.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:52.697Z,1509057592.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:53.053Z,1509057593.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:53.101Z,1509057593.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:53.444Z,1509057593.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:53.478Z,1509057593.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:53.846Z,1509057593.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:53.884Z,1509057593.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:54.392Z,1509057594.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:54.429Z,1509057594.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:54.794Z,1509057594.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:54.833Z,1509057594.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:55.202Z,1509057595.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:55.218Z,1509057595.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:55.602Z,1509057595.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:55.618Z,1509057595.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:55.999Z,1509057595.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:56.015Z,1509057596.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:56.391Z,1509057596.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:56.422Z,1509057596.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:56.790Z,1509057596.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:56.827Z,1509057596.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:57.193Z,1509057597.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:57.219Z,1509057597.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:57.605Z,1509057597.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:57.633Z,1509057597.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:57.992Z,1509057597.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:58.024Z,1509057598.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:58.400Z,1509057598.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:58.416Z,1509057598.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:58.803Z,1509057598.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:58.848Z,1509057598.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:59.193Z,1509057599.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:59.226Z,1509057599.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:59.593Z,1509057599.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:39:59.622Z,1509057599.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:39:59.995Z,1509057599.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:00.028Z,1509057600.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:00.397Z,1509057600.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:00.413Z,1509057600.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:00.797Z,1509057600.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:00.813Z,1509057600.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:01.194Z,1509057601.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:01.227Z,1509057601.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:01.597Z,1509057601.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:01.638Z,1509057601.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:02.004Z,1509057602.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:02.029Z,1509057602.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:02.404Z,1509057602.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:02.420Z,1509057602.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:02.803Z,1509057602.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:02.818Z,1509057602.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:03.191Z,1509057603.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:03.244Z,1509057603.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:03.596Z,1509057603.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:03.624Z,1509057603.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:03.995Z,1509057603.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:04.033Z,1509057604.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:04.394Z,1509057604.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:04.422Z,1509057604.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:04.791Z,1509057604.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:04.870Z,1509057604.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:05.211Z,1509057605.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:05.227Z,1509057605.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:05.593Z,1509057605.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:05.651Z,1509057605.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:05.994Z,1509057605.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:06.030Z,1509057606.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:06.388Z,1509057606.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:06.437Z,1509057606.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:06.791Z,1509057606.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:06.841Z,1509057606.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:07.196Z,1509057607.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:07.213Z,1509057607.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:07.614Z,1509057607.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:07.631Z,1509057607.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:07.997Z,1509057607.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:08.024Z,1509057608.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:08.387Z,1509057608.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:08.416Z,1509057608.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:08.787Z,1509057608.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:08.803Z,1509057608.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:09.203Z,1509057609.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:09.219Z,1509057609.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:09.603Z,1509057609.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:09.619Z,1509057609.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:10.009Z,1509057610.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:10.025Z,1509057610.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:10.408Z,1509057610.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:10.425Z,1509057610.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:10.804Z,1509057610.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:10.820Z,1509057610.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:11.191Z,1509057611.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:11.220Z,1509057611.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:11.596Z,1509057611.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:11.624Z,1509057611.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:11.993Z,1509057611.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:12.025Z,1509057612.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:12.397Z,1509057612.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:12.433Z,1509057612.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:12.792Z,1509057612.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:12.824Z,1509057612.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:13.213Z,1509057613.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:13.229Z,1509057613.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:13.603Z,1509057613.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:13.636Z,1509057613.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:13.996Z,1509057613.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:14.028Z,1509057614.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:14.395Z,1509057614.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:14.412Z,1509057614.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:14.800Z,1509057614.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:14.816Z,1509057614.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:15.187Z,1509057615.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:15.220Z,1509057615.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:15.606Z,1509057615.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:15.651Z,1509057615.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:15.992Z,1509057615.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:16.025Z,1509057616.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:16.398Z,1509057616.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:16.416Z,1509057616.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:16.803Z,1509057616.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:16.820Z,1509057616.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:17.199Z,1509057617.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:17.230Z,1509057617.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:17.598Z,1509057617.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:17.626Z,1509057617.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:17.998Z,1509057617.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:18.029Z,1509057618.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:18.397Z,1509057618.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:18.414Z,1509057618.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:18.796Z,1509057618.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:18.860Z,1509057618.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:19.200Z,1509057619.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:19.273Z,1509057619.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:19.604Z,1509057619.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:19.636Z,1509057619.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:20.001Z,1509057620.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:20.018Z,1509057620.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:20.401Z,1509057620.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:20.450Z,1509057620.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:20.803Z,1509057620.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:20.823Z,1509057620.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:21.184Z,1509057621.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:21.261Z,1509057621.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:21.588Z,1509057621.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:21.630Z,1509057621.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:21.992Z,1509057621.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:22.021Z,1509057622.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:22.415Z,1509057622.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:22.447Z,1509057622.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:22.793Z,1509057622.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:22.837Z,1509057622.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:23.208Z,1509057623.208 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:23.260Z,1509057623.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:23.605Z,1509057623.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:23.621Z,1509057623.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:23.987Z,1509057623.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:24.025Z,1509057624.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:24.393Z,1509057624.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:24.425Z,1509057624.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:24.788Z,1509057624.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:24.829Z,1509057624.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:25.201Z,1509057625.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:25.217Z,1509057625.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:25.602Z,1509057625.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:25.619Z,1509057625.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:26.118Z,1509057626.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:26.158Z,1509057626.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:26.519Z,1509057626.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:26.562Z,1509057626.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:26.976Z,1509057626.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:27.031Z,1509057627.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:27.287Z,1509057627.287 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:40:27.342Z,1509057627.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:27.392Z,1509057627.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:27.713Z,1509057627.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:27.742Z,1509057627.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:28.118Z,1509057628.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:28.155Z,1509057628.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:28.514Z,1509057628.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:28.530Z,1509057628.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:28.964Z,1509057628.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:29.030Z,1509057629.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:29.326Z,1509057629.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:29.376Z,1509057629.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:29.722Z,1509057629.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:29.749Z,1509057629.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:30.136Z,1509057630.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:30.170Z,1509057630.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:30.509Z,1509057630.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:30.548Z,1509057630.548 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:30.956Z,1509057630.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:31.018Z,1509057631.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:31.319Z,1509057631.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:31.340Z,1509057631.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:31.721Z,1509057631.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:31.745Z,1509057631.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:32.116Z,1509057632.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:32.164Z,1509057632.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:32.513Z,1509057632.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:32.575Z,1509057632.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:32.983Z,1509057632.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:33.016Z,1509057633.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:33.307Z,1509057633.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:33.323Z,1509057633.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:33.718Z,1509057633.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:33.795Z,1509057633.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:34.124Z,1509057634.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:34.163Z,1509057634.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:34.517Z,1509057634.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:34.580Z,1509057634.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:34.954Z,1509057634.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:35.008Z,1509057635.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:35.308Z,1509057635.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:35.355Z,1509057635.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:35.717Z,1509057635.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:35.760Z,1509057635.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:36.127Z,1509057636.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:36.167Z,1509057636.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:36.519Z,1509057636.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:36.566Z,1509057636.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:36.960Z,1509057636.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:37.007Z,1509057637.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:37.310Z,1509057637.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:37.352Z,1509057637.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:37.721Z,1509057637.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:37.753Z,1509057637.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:38.121Z,1509057638.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:38.178Z,1509057638.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:38.516Z,1509057638.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:38.538Z,1509057638.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:38.964Z,1509057638.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:39.015Z,1509057639.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:39.330Z,1509057639.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:39.349Z,1509057639.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:39.712Z,1509057639.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:39.742Z,1509057639.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:40.108Z,1509057640.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:40.195Z,1509057640.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:40.513Z,1509057640.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:40.553Z,1509057640.553 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:40.959Z,1509057640.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:41.004Z,1509057641.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:41.318Z,1509057641.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:41.338Z,1509057641.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:41.722Z,1509057641.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:41.747Z,1509057641.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:42.138Z,1509057642.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:42.160Z,1509057642.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:42.512Z,1509057642.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:42.529Z,1509057642.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:43.049Z,1509057643.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:43.074Z,1509057643.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:43.437Z,1509057643.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:43.466Z,1509057643.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:43.857Z,1509057643.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:43.873Z,1509057643.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:44.231Z,1509057644.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:44.247Z,1509057644.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:44.635Z,1509057644.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:44.676Z,1509057644.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:45.037Z,1509057645.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:45.090Z,1509057645.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:45.445Z,1509057645.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:45.472Z,1509057645.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:45.841Z,1509057645.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:45.872Z,1509057645.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:46.242Z,1509057646.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:46.279Z,1509057646.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:46.634Z,1509057646.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:46.655Z,1509057646.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:47.035Z,1509057647.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:47.056Z,1509057647.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:47.437Z,1509057647.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:47.493Z,1509057647.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:47.832Z,1509057647.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:47.909Z,1509057647.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:48.229Z,1509057648.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:48.266Z,1509057648.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:48.641Z,1509057648.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:48.674Z,1509057648.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:49.037Z,1509057649.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:49.095Z,1509057649.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:49.443Z,1509057649.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:49.487Z,1509057649.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:49.847Z,1509057649.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:49.904Z,1509057649.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:50.242Z,1509057650.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:50.297Z,1509057650.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:50.636Z,1509057650.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:50.669Z,1509057650.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:51.029Z,1509057651.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:51.059Z,1509057651.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:51.434Z,1509057651.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:51.463Z,1509057651.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:51.845Z,1509057651.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:51.877Z,1509057651.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:52.237Z,1509057652.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:52.265Z,1509057652.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:52.636Z,1509057652.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:52.652Z,1509057652.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:53.036Z,1509057653.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:53.052Z,1509057653.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:53.444Z,1509057653.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:53.460Z,1509057653.460 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:53.834Z,1509057653.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:53.865Z,1509057653.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:54.227Z,1509057654.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:54.267Z,1509057654.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:54.636Z,1509057654.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:54.674Z,1509057654.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:55.035Z,1509057655.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:55.057Z,1509057655.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:55.441Z,1509057655.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:55.457Z,1509057655.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:55.844Z,1509057655.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:55.866Z,1509057655.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:56.245Z,1509057656.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:56.278Z,1509057656.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:56.634Z,1509057656.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:56.667Z,1509057656.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:57.057Z,1509057657.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:57.073Z,1509057657.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:57.432Z,1509057657.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:57.448Z,1509057657.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:57.830Z,1509057657.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:57.846Z,1509057657.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:58.242Z,1509057658.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:58.279Z,1509057658.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:58.639Z,1509057658.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:58.656Z,1509057658.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:59.038Z,1509057659.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:59.075Z,1509057659.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:59.445Z,1509057659.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:59.461Z,1509057659.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:40:59.841Z,1509057659.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:40:59.857Z,1509057659.857 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:00.254Z,1509057660.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:00.270Z,1509057660.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:00.628Z,1509057660.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:00.667Z,1509057660.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:01.040Z,1509057661.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:01.072Z,1509057661.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:01.460Z,1509057661.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:01.476Z,1509057661.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:01.842Z,1509057661.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:01.907Z,1509057661.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:02.238Z,1509057662.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:02.285Z,1509057662.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:02.631Z,1509057662.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:02.671Z,1509057662.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:03.051Z,1509057663.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:03.089Z,1509057663.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:03.431Z,1509057663.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:03.493Z,1509057663.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:03.837Z,1509057663.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:03.866Z,1509057663.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:04.238Z,1509057664.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:04.305Z,1509057664.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:04.636Z,1509057664.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:04.695Z,1509057664.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:05.041Z,1509057665.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:05.063Z,1509057665.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:05.427Z,1509057665.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:05.452Z,1509057665.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:05.830Z,1509057665.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:05.861Z,1509057665.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:06.230Z,1509057666.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:06.258Z,1509057666.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:06.775Z,1509057666.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:06.808Z,1509057666.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:07.182Z,1509057667.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:07.222Z,1509057667.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:07.585Z,1509057667.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:07.602Z,1509057667.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:07.978Z,1509057667.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:07.995Z,1509057667.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:08.387Z,1509057668.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:08.405Z,1509057668.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:08.766Z,1509057668.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:08.794Z,1509057668.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:09.173Z,1509057669.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:09.206Z,1509057669.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:09.571Z,1509057669.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:09.591Z,1509057669.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:09.976Z,1509057669.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:09.992Z,1509057669.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:10.379Z,1509057670.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:10.395Z,1509057670.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:10.771Z,1509057670.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:10.805Z,1509057670.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:11.187Z,1509057671.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:11.209Z,1509057671.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:11.573Z,1509057671.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:11.609Z,1509057671.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:11.982Z,1509057671.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:12.011Z,1509057672.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:12.366Z,1509057672.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:12.405Z,1509057672.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:12.802Z,1509057672.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:12.818Z,1509057672.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:13.193Z,1509057673.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:13.223Z,1509057673.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:13.590Z,1509057673.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:13.606Z,1509057673.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:13.984Z,1509057673.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:14.000Z,1509057674.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:14.365Z,1509057674.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:14.398Z,1509057674.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:14.768Z,1509057674.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:14.798Z,1509057674.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:15.183Z,1509057675.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:15.218Z,1509057675.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:15.582Z,1509057675.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:15.599Z,1509057675.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:15.980Z,1509057675.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:15.997Z,1509057675.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:16.375Z,1509057676.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:16.392Z,1509057676.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:16.765Z,1509057676.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:16.818Z,1509057676.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:17.175Z,1509057677.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:17.257Z,1509057677.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:17.574Z,1509057677.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:17.590Z,1509057677.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:17.984Z,1509057677.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:18.000Z,1509057678.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:18.372Z,1509057678.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:18.441Z,1509057678.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:18.789Z,1509057678.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:18.817Z,1509057678.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:19.175Z,1509057679.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:19.226Z,1509057679.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:19.583Z,1509057679.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:19.630Z,1509057679.630 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:19.976Z,1509057679.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:19.997Z,1509057679.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:20.371Z,1509057680.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:20.408Z,1509057680.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:20.771Z,1509057680.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:20.799Z,1509057680.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:21.190Z,1509057681.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:21.207Z,1509057681.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:21.569Z,1509057681.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:21.598Z,1509057681.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:21.973Z,1509057681.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:22.000Z,1509057682.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:22.377Z,1509057682.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:22.409Z,1509057682.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:22.778Z,1509057682.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:22.804Z,1509057682.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:23.177Z,1509057683.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:23.192Z,1509057683.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:23.583Z,1509057683.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:23.599Z,1509057683.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:23.982Z,1509057683.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:23.998Z,1509057683.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:24.390Z,1509057684.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:24.425Z,1509057684.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:24.771Z,1509057684.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:24.802Z,1509057684.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:25.169Z,1509057685.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:25.199Z,1509057685.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:25.590Z,1509057685.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:25.618Z,1509057685.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:25.974Z,1509057685.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:26.011Z,1509057686.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:26.377Z,1509057686.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:26.416Z,1509057686.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:26.780Z,1509057686.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:26.796Z,1509057686.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:27.275Z,1509057687.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:27.291Z,1509057687.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:27.645Z,1509057687.645 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:41:27.685Z,1509057687.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:27.702Z,1509057687.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:28.081Z,1509057688.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:28.097Z,1509057688.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:28.470Z,1509057688.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:28.514Z,1509057688.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:28.921Z,1509057688.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:28.967Z,1509057688.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:29.309Z,1509057689.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:29.362Z,1509057689.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:29.690Z,1509057689.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:29.725Z,1509057689.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:30.085Z,1509057690.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:30.101Z,1509057690.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:30.492Z,1509057690.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:30.513Z,1509057690.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:30.914Z,1509057690.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:30.968Z,1509057690.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:31.282Z,1509057691.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:31.325Z,1509057691.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:31.684Z,1509057691.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:31.757Z,1509057691.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:32.078Z,1509057692.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:32.095Z,1509057692.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:32.492Z,1509057692.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:32.554Z,1509057692.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:32.895Z,1509057692.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:32.968Z,1509057692.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:33.306Z,1509057693.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:33.361Z,1509057693.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:33.672Z,1509057693.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:33.728Z,1509057693.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:34.082Z,1509057694.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:34.105Z,1509057694.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:34.472Z,1509057694.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:34.509Z,1509057694.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:34.968Z,1509057694.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:35.023Z,1509057695.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:35.279Z,1509057695.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:35.296Z,1509057695.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:35.695Z,1509057695.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:35.728Z,1509057695.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:36.084Z,1509057696.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:36.101Z,1509057696.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:36.482Z,1509057696.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:36.516Z,1509057696.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:36.909Z,1509057696.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:36.972Z,1509057696.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:37.265Z,1509057697.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:37.293Z,1509057697.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:37.679Z,1509057697.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:37.712Z,1509057697.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:38.077Z,1509057698.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:38.093Z,1509057698.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:38.480Z,1509057698.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:38.497Z,1509057698.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:38.916Z,1509057698.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:38.956Z,1509057698.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:39.275Z,1509057699.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:39.291Z,1509057699.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:39.677Z,1509057699.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:39.708Z,1509057699.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:40.067Z,1509057700.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:40.092Z,1509057700.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:40.485Z,1509057700.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:40.502Z,1509057700.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:40.866Z,1509057700.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:40.896Z,1509057700.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:41.272Z,1509057701.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:41.318Z,1509057701.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:41.677Z,1509057701.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:41.711Z,1509057701.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:42.082Z,1509057702.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:42.099Z,1509057702.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:42.490Z,1509057702.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:42.506Z,1509057702.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:42.866Z,1509057702.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:42.898Z,1509057702.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:43.272Z,1509057703.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:43.289Z,1509057703.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:43.677Z,1509057703.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:43.726Z,1509057703.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:44.079Z,1509057704.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:44.095Z,1509057704.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:44.473Z,1509057704.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:44.496Z,1509057704.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:44.872Z,1509057704.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:44.893Z,1509057704.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:45.264Z,1509057705.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:45.304Z,1509057705.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:45.678Z,1509057705.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:45.731Z,1509057705.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:46.111Z,1509057706.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:46.240Z,1509057706.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:46.480Z,1509057706.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:46.523Z,1509057706.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:46.928Z,1509057706.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:47.019Z,1509057707.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:47.274Z,1509057707.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:47.291Z,1509057707.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:47.675Z,1509057707.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:47.727Z,1509057707.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:48.077Z,1509057708.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:48.143Z,1509057708.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:48.464Z,1509057708.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:48.508Z,1509057708.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:48.924Z,1509057708.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:49.002Z,1509057709.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:49.281Z,1509057709.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:49.310Z,1509057709.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:49.688Z,1509057709.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:49.721Z,1509057709.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:50.105Z,1509057710.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:50.171Z,1509057710.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:50.466Z,1509057710.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:50.501Z,1509057710.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:50.937Z,1509057710.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:50.969Z,1509057710.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:51.282Z,1509057711.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:51.298Z,1509057711.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:51.749Z,1509057711.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:51.798Z,1509057711.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:52.075Z,1509057712.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:52.104Z,1509057712.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:52.472Z,1509057712.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:52.488Z,1509057712.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:52.922Z,1509057712.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:53.001Z,1509057713.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:53.276Z,1509057713.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:53.304Z,1509057713.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:53.679Z,1509057713.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:53.727Z,1509057713.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:54.073Z,1509057714.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:54.089Z,1509057714.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:54.477Z,1509057714.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:54.500Z,1509057714.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:54.927Z,1509057714.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:54.973Z,1509057714.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:55.277Z,1509057715.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:55.294Z,1509057715.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:55.675Z,1509057715.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:55.693Z,1509057715.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:56.080Z,1509057716.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:56.096Z,1509057716.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:56.481Z,1509057716.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:56.497Z,1509057716.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:56.895Z,1509057716.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:56.958Z,1509057716.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:57.273Z,1509057717.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:57.289Z,1509057717.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:57.669Z,1509057717.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:57.711Z,1509057717.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:58.080Z,1509057718.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:58.097Z,1509057718.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:58.483Z,1509057718.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:58.506Z,1509057718.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:58.902Z,1509057718.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:58.967Z,1509057718.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:59.275Z,1509057719.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:59.307Z,1509057719.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:41:59.678Z,1509057719.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:41:59.722Z,1509057719.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:00.087Z,1509057720.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:00.152Z,1509057720.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:00.485Z,1509057720.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:00.542Z,1509057720.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:00.889Z,1509057720.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:00.955Z,1509057720.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:01.274Z,1509057721.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:01.331Z,1509057721.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:01.671Z,1509057721.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:01.700Z,1509057721.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:02.080Z,1509057722.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:02.139Z,1509057722.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:02.487Z,1509057722.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:02.541Z,1509057722.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:02.948Z,1509057722.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:02.992Z,1509057722.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:03.278Z,1509057723.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:03.331Z,1509057723.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:03.676Z,1509057723.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:03.724Z,1509057723.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:04.076Z,1509057724.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:04.112Z,1509057724.112 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:04.112Z,1509057724.112 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 58
2017-10-26T22:42:04.126Z,1509057724.126 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:42:04.152Z,1509057724.152 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:04.152Z,1509057724.152 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 58
2017-10-26T22:42:04.153Z,1509057724.153 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:42:04.259Z,1509057724.259 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:42:04.259Z,1509057724.259 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:42:04.463Z,1509057724.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:04.558Z,1509057724.558 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:42:04.559Z,1509057724.559 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 58
2017-10-26T22:42:04.559Z,1509057724.559 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:42:04.559Z,1509057724.559 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 58
2017-10-26T22:42:04.877Z,1509057724.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:04.987Z,1509057724.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:42:04.988Z,1509057724.988 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:42:04.989Z,1509057724.989 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:42:05.011Z,1509057725.011 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:42:05.011Z,1509057725.011 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:42:05.011Z,1509057725.011 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:42:05.279Z,1509057725.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:05.296Z,1509057725.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:05.673Z,1509057725.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:05.689Z,1509057725.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:06.073Z,1509057726.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:06.097Z,1509057726.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:06.481Z,1509057726.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:06.498Z,1509057726.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:06.942Z,1509057726.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:07.022Z,1509057727.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:07.267Z,1509057727.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:07.292Z,1509057727.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:07.673Z,1509057727.673 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:07.705Z,1509057727.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:08.067Z,1509057728.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:08.090Z,1509057728.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:08.472Z,1509057728.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:08.488Z,1509057728.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:08.895Z,1509057728.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:08.984Z,1509057728.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:09.276Z,1509057729.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:09.292Z,1509057729.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:09.680Z,1509057729.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:09.697Z,1509057729.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:10.078Z,1509057730.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:10.094Z,1509057730.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:10.471Z,1509057730.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:10.496Z,1509057730.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:10.876Z,1509057730.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:10.960Z,1509057730.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:11.280Z,1509057731.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:11.296Z,1509057731.296 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:11.679Z,1509057731.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:11.695Z,1509057731.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:12.077Z,1509057732.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:12.093Z,1509057732.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:12.464Z,1509057732.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:12.500Z,1509057732.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:12.876Z,1509057732.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:12.983Z,1509057732.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:13.281Z,1509057733.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:13.310Z,1509057733.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:13.671Z,1509057733.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:13.688Z,1509057733.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:14.081Z,1509057734.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:14.098Z,1509057734.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:14.481Z,1509057734.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:14.551Z,1509057734.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:14.916Z,1509057734.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:15.016Z,1509057735.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:15.279Z,1509057735.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:15.313Z,1509057735.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:15.658Z,1509057735.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:15.701Z,1509057735.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:16.073Z,1509057736.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:16.101Z,1509057736.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:16.470Z,1509057736.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:16.524Z,1509057736.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:16.879Z,1509057736.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:16.985Z,1509057736.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:17.277Z,1509057737.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:17.315Z,1509057737.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:17.683Z,1509057737.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:17.700Z,1509057737.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:18.074Z,1509057738.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:18.090Z,1509057738.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:18.461Z,1509057738.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:18.499Z,1509057738.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:18.866Z,1509057738.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:18.898Z,1509057738.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:19.272Z,1509057739.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:19.301Z,1509057739.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:19.682Z,1509057739.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:19.706Z,1509057739.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:20.078Z,1509057740.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:20.094Z,1509057740.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:20.483Z,1509057740.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:20.499Z,1509057740.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:21.013Z,1509057741.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:21.043Z,1509057741.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:21.416Z,1509057741.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:21.452Z,1509057741.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:21.811Z,1509057741.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:21.827Z,1509057741.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:22.214Z,1509057742.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:22.230Z,1509057742.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:22.610Z,1509057742.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:22.627Z,1509057742.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:23.035Z,1509057743.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:23.098Z,1509057743.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:23.404Z,1509057743.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:23.448Z,1509057743.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:23.799Z,1509057743.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:23.830Z,1509057743.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:24.224Z,1509057744.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:24.256Z,1509057744.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:24.609Z,1509057744.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:24.635Z,1509057744.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:25.011Z,1509057745.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:25.028Z,1509057745.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:25.415Z,1509057745.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:25.435Z,1509057745.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:25.815Z,1509057745.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:25.852Z,1509057745.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:26.216Z,1509057746.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:26.247Z,1509057746.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:26.602Z,1509057746.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:26.637Z,1509057746.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:27.007Z,1509057747.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:27.036Z,1509057747.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:27.407Z,1509057747.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:27.435Z,1509057747.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:27.786Z,1509057747.786 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:42:27.822Z,1509057747.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:27.850Z,1509057747.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:28.213Z,1509057748.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:28.252Z,1509057748.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:28.611Z,1509057748.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:28.627Z,1509057748.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:29.022Z,1509057749.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:29.090Z,1509057749.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:29.398Z,1509057749.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:29.429Z,1509057749.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:29.930Z,1509057749.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:29.984Z,1509057749.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:30.332Z,1509057750.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:30.349Z,1509057750.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:30.735Z,1509057750.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:30.792Z,1509057750.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:31.149Z,1509057751.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:31.205Z,1509057751.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:31.529Z,1509057751.529 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:31.562Z,1509057751.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:31.925Z,1509057751.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:31.950Z,1509057751.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:32.328Z,1509057752.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:32.360Z,1509057752.360 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:32.731Z,1509057752.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:32.767Z,1509057752.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:33.138Z,1509057753.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:33.179Z,1509057753.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:33.533Z,1509057753.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:33.549Z,1509057753.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:33.936Z,1509057753.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:33.961Z,1509057753.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:34.323Z,1509057754.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:34.355Z,1509057754.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:34.727Z,1509057754.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:34.757Z,1509057754.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:35.153Z,1509057755.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:35.173Z,1509057755.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:35.543Z,1509057755.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:35.567Z,1509057755.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:35.932Z,1509057755.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:35.967Z,1509057755.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:36.332Z,1509057756.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:36.348Z,1509057756.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:36.739Z,1509057756.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:36.772Z,1509057756.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:37.138Z,1509057757.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:37.175Z,1509057757.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:37.535Z,1509057757.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:37.551Z,1509057757.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:37.937Z,1509057757.937 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:37.953Z,1509057757.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:38.340Z,1509057758.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:38.357Z,1509057758.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:38.741Z,1509057758.741 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:38.779Z,1509057758.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:39.126Z,1509057759.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:39.191Z,1509057759.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:39.530Z,1509057759.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:39.556Z,1509057759.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:39.934Z,1509057759.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:39.979Z,1509057759.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:40.327Z,1509057760.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:40.364Z,1509057760.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:40.733Z,1509057760.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:40.778Z,1509057760.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:41.159Z,1509057761.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:41.179Z,1509057761.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:41.526Z,1509057761.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:41.558Z,1509057761.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:41.931Z,1509057761.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:41.948Z,1509057761.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:42.487Z,1509057762.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:42.503Z,1509057762.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:42.893Z,1509057762.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:42.910Z,1509057762.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:43.283Z,1509057763.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:43.373Z,1509057763.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:43.685Z,1509057763.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:43.714Z,1509057763.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:44.089Z,1509057764.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:44.158Z,1509057764.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:44.487Z,1509057764.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:44.527Z,1509057764.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:44.881Z,1509057764.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:44.983Z,1509057764.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:45.275Z,1509057765.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:45.308Z,1509057765.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:45.677Z,1509057765.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:45.728Z,1509057765.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:46.084Z,1509057766.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:46.143Z,1509057766.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:46.484Z,1509057766.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:46.500Z,1509057766.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:46.889Z,1509057766.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:46.981Z,1509057766.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:47.277Z,1509057767.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:47.307Z,1509057767.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:47.679Z,1509057767.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:47.707Z,1509057767.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:48.083Z,1509057768.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:48.144Z,1509057768.144 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:48.482Z,1509057768.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:48.522Z,1509057768.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:48.948Z,1509057768.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:49.011Z,1509057769.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:49.289Z,1509057769.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:49.310Z,1509057769.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:49.674Z,1509057769.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:49.704Z,1509057769.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:50.100Z,1509057770.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:50.160Z,1509057770.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:50.476Z,1509057770.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:50.499Z,1509057770.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:50.887Z,1509057770.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:50.903Z,1509057770.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:51.284Z,1509057771.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:51.313Z,1509057771.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:51.684Z,1509057771.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:51.712Z,1509057771.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:52.071Z,1509057772.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:52.087Z,1509057772.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:52.476Z,1509057772.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:52.492Z,1509057772.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:52.955Z,1509057772.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:53.013Z,1509057773.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:53.282Z,1509057773.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:53.316Z,1509057773.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:53.675Z,1509057773.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:53.708Z,1509057773.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:54.082Z,1509057774.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:54.130Z,1509057774.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:54.481Z,1509057774.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:54.518Z,1509057774.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:54.881Z,1509057774.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:54.981Z,1509057774.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:55.278Z,1509057775.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:55.307Z,1509057775.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:55.683Z,1509057775.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:55.721Z,1509057775.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:56.095Z,1509057776.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:56.148Z,1509057776.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:56.488Z,1509057776.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:56.505Z,1509057776.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:56.894Z,1509057776.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:56.989Z,1509057776.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:57.292Z,1509057777.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:57.377Z,1509057777.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:57.691Z,1509057777.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:57.708Z,1509057777.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:58.081Z,1509057778.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:58.151Z,1509057778.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:58.483Z,1509057778.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:58.536Z,1509057778.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:58.890Z,1509057778.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:58.906Z,1509057778.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:59.288Z,1509057779.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:59.343Z,1509057779.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:42:59.683Z,1509057779.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:42:59.699Z,1509057779.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:00.093Z,1509057780.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:00.173Z,1509057780.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:00.487Z,1509057780.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:00.503Z,1509057780.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:00.941Z,1509057780.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:01.016Z,1509057781.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:01.281Z,1509057781.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:01.297Z,1509057781.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:01.691Z,1509057781.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:01.709Z,1509057781.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:02.097Z,1509057782.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:02.167Z,1509057782.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:02.479Z,1509057782.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:02.526Z,1509057782.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:03.069Z,1509057783.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:03.087Z,1509057783.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:03.477Z,1509057783.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:03.513Z,1509057783.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:03.876Z,1509057783.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:03.892Z,1509057783.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:04.278Z,1509057784.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:04.294Z,1509057784.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:04.675Z,1509057784.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:04.692Z,1509057784.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:05.073Z,1509057785.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:05.089Z,1509057785.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:05.474Z,1509057785.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:05.495Z,1509057785.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:05.875Z,1509057785.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:05.901Z,1509057785.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:06.274Z,1509057786.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:06.291Z,1509057786.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:06.664Z,1509057786.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:06.693Z,1509057786.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:07.093Z,1509057787.093 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:07.109Z,1509057787.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:07.468Z,1509057787.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:07.497Z,1509057787.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:07.869Z,1509057787.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:07.893Z,1509057787.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:08.275Z,1509057788.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:08.303Z,1509057788.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:08.670Z,1509057788.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:08.691Z,1509057788.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:09.074Z,1509057789.074 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:09.090Z,1509057789.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:09.468Z,1509057789.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:09.505Z,1509057789.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:09.874Z,1509057789.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:09.910Z,1509057789.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:10.265Z,1509057790.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:10.299Z,1509057790.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:10.670Z,1509057790.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:10.716Z,1509057790.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:11.072Z,1509057791.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:11.089Z,1509057791.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:11.473Z,1509057791.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:11.516Z,1509057791.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:11.874Z,1509057791.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:11.948Z,1509057791.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:12.287Z,1509057792.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:12.308Z,1509057792.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:12.706Z,1509057792.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:12.758Z,1509057792.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:13.062Z,1509057793.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:13.100Z,1509057793.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:13.466Z,1509057793.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:13.540Z,1509057793.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:13.875Z,1509057793.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:13.945Z,1509057793.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:14.268Z,1509057794.268 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:14.311Z,1509057794.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:14.669Z,1509057794.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:14.712Z,1509057794.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:15.086Z,1509057795.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:15.159Z,1509057795.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:15.466Z,1509057795.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:15.498Z,1509057795.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:15.866Z,1509057795.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:15.901Z,1509057795.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:16.267Z,1509057796.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:16.304Z,1509057796.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:16.667Z,1509057796.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:16.683Z,1509057796.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:17.086Z,1509057797.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:17.111Z,1509057797.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:17.475Z,1509057797.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:17.514Z,1509057797.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:17.878Z,1509057797.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:17.894Z,1509057797.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:18.288Z,1509057798.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:18.306Z,1509057798.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:18.670Z,1509057798.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:18.700Z,1509057798.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:19.063Z,1509057799.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:19.096Z,1509057799.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:19.485Z,1509057799.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:19.508Z,1509057799.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:19.879Z,1509057799.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:19.896Z,1509057799.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:20.275Z,1509057800.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:20.292Z,1509057800.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:20.671Z,1509057800.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:20.693Z,1509057800.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:21.078Z,1509057801.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:21.099Z,1509057801.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:21.466Z,1509057801.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:21.503Z,1509057801.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:21.865Z,1509057801.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:21.882Z,1509057801.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:22.275Z,1509057802.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:22.304Z,1509057802.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:22.677Z,1509057802.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:22.693Z,1509057802.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:23.079Z,1509057803.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:23.096Z,1509057803.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:23.466Z,1509057803.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:23.512Z,1509057803.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:23.881Z,1509057803.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:23.905Z,1509057803.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:24.284Z,1509057804.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:24.340Z,1509057804.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:24.667Z,1509057804.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:24.703Z,1509057804.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:25.073Z,1509057805.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:25.098Z,1509057805.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:25.475Z,1509057805.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:25.500Z,1509057805.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:25.864Z,1509057805.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:25.924Z,1509057805.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:26.284Z,1509057806.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:26.316Z,1509057806.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:26.692Z,1509057806.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:26.712Z,1509057806.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:27.083Z,1509057807.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:27.156Z,1509057807.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:27.471Z,1509057807.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:27.499Z,1509057807.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:27.847Z,1509057807.847 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:43:27.878Z,1509057807.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:27.929Z,1509057807.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:28.267Z,1509057808.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:28.321Z,1509057808.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:28.668Z,1509057808.668 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:28.691Z,1509057808.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:29.071Z,1509057809.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:29.095Z,1509057809.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:29.466Z,1509057809.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:29.500Z,1509057809.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:29.884Z,1509057809.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:29.955Z,1509057809.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:30.281Z,1509057810.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:30.299Z,1509057810.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:30.667Z,1509057810.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:30.710Z,1509057810.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:31.102Z,1509057811.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:31.156Z,1509057811.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:31.471Z,1509057811.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:31.513Z,1509057811.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:31.871Z,1509057811.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:31.900Z,1509057811.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:32.275Z,1509057812.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:32.291Z,1509057812.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:32.685Z,1509057812.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:32.724Z,1509057812.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:33.075Z,1509057813.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:33.107Z,1509057813.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:33.463Z,1509057813.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:33.496Z,1509057813.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:33.870Z,1509057813.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:33.904Z,1509057813.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:34.267Z,1509057814.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:34.299Z,1509057814.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:34.667Z,1509057814.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:34.718Z,1509057814.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:35.071Z,1509057815.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:35.087Z,1509057815.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:35.476Z,1509057815.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:35.493Z,1509057815.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:35.876Z,1509057815.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:35.893Z,1509057815.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:36.393Z,1509057816.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:36.417Z,1509057816.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:36.791Z,1509057816.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:36.837Z,1509057816.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:37.196Z,1509057817.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:37.213Z,1509057817.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:37.587Z,1509057817.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:37.614Z,1509057817.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:37.983Z,1509057817.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:38.014Z,1509057818.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:38.382Z,1509057818.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:38.410Z,1509057818.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:38.789Z,1509057818.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:38.837Z,1509057818.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:39.194Z,1509057819.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:39.255Z,1509057819.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:39.593Z,1509057819.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:39.615Z,1509057819.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:39.984Z,1509057819.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:40.021Z,1509057820.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:40.381Z,1509057820.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:40.451Z,1509057820.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:40.790Z,1509057820.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:40.835Z,1509057820.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:41.202Z,1509057821.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:41.218Z,1509057821.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:41.600Z,1509057821.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:41.659Z,1509057821.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:42.006Z,1509057822.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:42.023Z,1509057822.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:42.384Z,1509057822.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:42.456Z,1509057822.456 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:42.781Z,1509057822.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:42.855Z,1509057822.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:43.192Z,1509057823.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:43.228Z,1509057823.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:43.584Z,1509057823.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:43.601Z,1509057823.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:43.983Z,1509057823.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:44.004Z,1509057824.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:44.387Z,1509057824.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:44.405Z,1509057824.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:44.788Z,1509057824.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:44.805Z,1509057824.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:45.183Z,1509057825.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:45.211Z,1509057825.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:45.601Z,1509057825.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:45.618Z,1509057825.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:46.005Z,1509057826.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:46.022Z,1509057826.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:46.377Z,1509057826.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:46.416Z,1509057826.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:46.786Z,1509057826.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:46.822Z,1509057826.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:47.194Z,1509057827.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:47.210Z,1509057827.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:47.604Z,1509057827.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:47.633Z,1509057827.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:47.996Z,1509057827.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:48.018Z,1509057828.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:48.396Z,1509057828.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:48.412Z,1509057828.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:48.793Z,1509057828.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:48.810Z,1509057828.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:49.182Z,1509057829.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:49.219Z,1509057829.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:49.583Z,1509057829.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:49.615Z,1509057829.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:49.991Z,1509057829.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:50.029Z,1509057830.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:50.393Z,1509057830.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:50.422Z,1509057830.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:50.794Z,1509057830.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:50.809Z,1509057830.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:51.192Z,1509057831.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:51.220Z,1509057831.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:51.589Z,1509057831.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:51.610Z,1509057831.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:51.985Z,1509057831.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:52.002Z,1509057832.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:52.383Z,1509057832.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:52.411Z,1509057832.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:52.796Z,1509057832.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:52.812Z,1509057832.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:53.194Z,1509057833.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:53.217Z,1509057833.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:53.601Z,1509057833.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:53.618Z,1509057833.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:53.979Z,1509057833.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:54.037Z,1509057834.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:54.388Z,1509057834.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:54.430Z,1509057834.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:54.787Z,1509057834.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:54.818Z,1509057834.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:55.195Z,1509057835.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:55.267Z,1509057835.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:55.594Z,1509057835.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:55.617Z,1509057835.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:55.988Z,1509057835.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:56.059Z,1509057836.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:56.393Z,1509057836.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:56.418Z,1509057836.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:56.784Z,1509057836.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:56.834Z,1509057836.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:57.189Z,1509057837.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:57.236Z,1509057837.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:57.592Z,1509057837.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:57.609Z,1509057837.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:57.994Z,1509057837.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:58.016Z,1509057838.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:58.391Z,1509057838.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:58.413Z,1509057838.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:58.981Z,1509057838.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:59.057Z,1509057839.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:59.396Z,1509057839.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:59.447Z,1509057839.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:43:59.790Z,1509057839.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:43:59.824Z,1509057839.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:00.207Z,1509057840.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:00.240Z,1509057840.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:00.591Z,1509057840.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:00.623Z,1509057840.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:01.027Z,1509057841.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:01.063Z,1509057841.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:01.386Z,1509057841.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:01.425Z,1509057841.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:01.809Z,1509057841.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:01.836Z,1509057841.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:02.186Z,1509057842.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:02.247Z,1509057842.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:02.585Z,1509057842.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:02.646Z,1509057842.646 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:03.007Z,1509057843.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:03.043Z,1509057843.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:03.420Z,1509057843.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:03.444Z,1509057843.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:03.789Z,1509057843.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:03.834Z,1509057843.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:04.230Z,1509057844.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:04.281Z,1509057844.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:04.591Z,1509057844.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:04.639Z,1509057844.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:04.994Z,1509057844.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:05.030Z,1509057845.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:05.387Z,1509057845.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:05.431Z,1509057845.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:05.785Z,1509057845.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:05.819Z,1509057845.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:06.192Z,1509057846.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:06.239Z,1509057846.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:06.593Z,1509057846.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:06.625Z,1509057846.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:06.978Z,1509057846.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:07.019Z,1509057847.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:07.380Z,1509057847.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:07.430Z,1509057847.430 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:07.790Z,1509057847.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:07.817Z,1509057847.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:08.211Z,1509057848.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:08.275Z,1509057848.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:08.588Z,1509057848.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:08.636Z,1509057848.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:08.981Z,1509057848.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:09.034Z,1509057849.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:09.406Z,1509057849.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:09.462Z,1509057849.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:09.783Z,1509057849.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:09.827Z,1509057849.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:10.187Z,1509057850.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:10.251Z,1509057850.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:10.588Z,1509057850.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:10.631Z,1509057850.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:11.023Z,1509057851.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:11.082Z,1509057851.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:11.403Z,1509057851.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:11.429Z,1509057851.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:11.796Z,1509057851.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:11.861Z,1509057851.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:12.203Z,1509057852.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:12.224Z,1509057852.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:12.578Z,1509057852.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:12.619Z,1509057852.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:12.985Z,1509057852.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:13.014Z,1509057853.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:13.402Z,1509057853.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:13.448Z,1509057853.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:13.791Z,1509057853.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:13.817Z,1509057853.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:14.198Z,1509057854.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:14.232Z,1509057854.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:14.596Z,1509057854.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:14.614Z,1509057854.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:14.978Z,1509057854.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:15.021Z,1509057855.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:15.384Z,1509057855.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:15.465Z,1509057855.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:15.827Z,1509057855.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:15.848Z,1509057855.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:16.186Z,1509057856.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:16.219Z,1509057856.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:16.586Z,1509057856.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:16.643Z,1509057856.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:17.174Z,1509057857.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:17.202Z,1509057857.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:17.566Z,1509057857.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:17.582Z,1509057857.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:17.961Z,1509057857.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:17.977Z,1509057857.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:18.366Z,1509057858.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:18.382Z,1509057858.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:18.767Z,1509057858.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:18.783Z,1509057858.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:19.180Z,1509057859.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:19.208Z,1509057859.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:19.574Z,1509057859.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:19.592Z,1509057859.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:19.970Z,1509057859.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:19.987Z,1509057859.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:20.375Z,1509057860.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:20.392Z,1509057860.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:20.759Z,1509057860.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:20.793Z,1509057860.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:21.171Z,1509057861.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:21.204Z,1509057861.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:21.568Z,1509057861.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:21.601Z,1509057861.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:21.960Z,1509057861.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:21.988Z,1509057861.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:22.366Z,1509057862.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:22.382Z,1509057862.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:22.453Z,1509057862.453 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T22:44:22.757Z,1509057862.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:22.807Z,1509057862.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:23.168Z,1509057863.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:23.184Z,1509057863.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:23.573Z,1509057863.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:23.596Z,1509057863.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:23.966Z,1509057863.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:24.029Z,1509057864.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:24.360Z,1509057864.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:24.389Z,1509057864.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:24.761Z,1509057864.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:24.813Z,1509057864.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:25.181Z,1509057865.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:25.242Z,1509057865.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:25.558Z,1509057865.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:25.609Z,1509057865.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:25.972Z,1509057865.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:26.023Z,1509057866.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:26.366Z,1509057866.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:26.419Z,1509057866.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:26.767Z,1509057866.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:26.784Z,1509057866.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:27.158Z,1509057867.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:27.187Z,1509057867.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:27.571Z,1509057867.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:27.587Z,1509057867.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:27.979Z,1509057867.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:27.995Z,1509057867.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:28.333Z,1509057868.333 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:44:28.359Z,1509057868.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:28.403Z,1509057868.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:28.770Z,1509057868.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:28.820Z,1509057868.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:29.168Z,1509057869.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:29.183Z,1509057869.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:29.573Z,1509057869.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:29.589Z,1509057869.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:29.971Z,1509057869.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:29.988Z,1509057869.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:30.357Z,1509057870.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:30.393Z,1509057870.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:30.759Z,1509057870.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:30.800Z,1509057870.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:31.167Z,1509057871.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:31.199Z,1509057871.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:31.573Z,1509057871.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:31.621Z,1509057871.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:31.958Z,1509057871.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:31.991Z,1509057871.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:32.365Z,1509057872.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:32.381Z,1509057872.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:32.769Z,1509057872.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:32.806Z,1509057872.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:33.162Z,1509057873.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:33.192Z,1509057873.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:33.567Z,1509057873.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:33.595Z,1509057873.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:33.972Z,1509057873.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:34.011Z,1509057874.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:34.463Z,1509057874.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:34.505Z,1509057874.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:34.871Z,1509057874.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:34.948Z,1509057874.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:35.271Z,1509057875.271 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:35.291Z,1509057875.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:35.671Z,1509057875.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:35.687Z,1509057875.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:36.090Z,1509057876.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:36.106Z,1509057876.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:36.457Z,1509057876.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:36.490Z,1509057876.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:36.867Z,1509057876.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:36.984Z,1509057876.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:37.265Z,1509057877.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:37.300Z,1509057877.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:37.667Z,1509057877.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:37.699Z,1509057877.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:38.072Z,1509057878.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:38.088Z,1509057878.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:38.462Z,1509057878.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:38.515Z,1509057878.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:38.866Z,1509057878.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:38.977Z,1509057878.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:39.266Z,1509057879.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:39.283Z,1509057879.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:39.666Z,1509057879.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:39.721Z,1509057879.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:40.072Z,1509057880.072 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:40.089Z,1509057880.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:40.471Z,1509057880.471 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:40.526Z,1509057880.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:40.872Z,1509057880.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:40.987Z,1509057880.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:41.262Z,1509057881.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:41.292Z,1509057881.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:41.676Z,1509057881.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:41.699Z,1509057881.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:42.058Z,1509057882.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:42.099Z,1509057882.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:42.465Z,1509057882.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:42.500Z,1509057882.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:42.865Z,1509057882.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:42.894Z,1509057882.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:43.269Z,1509057883.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:43.298Z,1509057883.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:43.658Z,1509057883.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:43.697Z,1509057883.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:44.057Z,1509057884.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:44.089Z,1509057884.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:44.461Z,1509057884.461 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:44.498Z,1509057884.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:44.865Z,1509057884.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:44.881Z,1509057884.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:45.274Z,1509057885.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:45.290Z,1509057885.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:45.664Z,1509057885.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:45.708Z,1509057885.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:46.080Z,1509057886.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:46.096Z,1509057886.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:46.460Z,1509057886.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:46.489Z,1509057886.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:46.867Z,1509057886.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:46.895Z,1509057886.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:47.266Z,1509057887.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:47.282Z,1509057887.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:47.667Z,1509057887.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:47.684Z,1509057887.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:48.073Z,1509057888.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:48.094Z,1509057888.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:48.477Z,1509057888.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:48.513Z,1509057888.513 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:48.858Z,1509057888.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:48.891Z,1509057888.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:49.266Z,1509057889.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:49.282Z,1509057889.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:49.670Z,1509057889.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:49.699Z,1509057889.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:50.076Z,1509057890.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:50.098Z,1509057890.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:50.462Z,1509057890.462 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:50.503Z,1509057890.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:50.855Z,1509057890.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:50.900Z,1509057890.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:51.262Z,1509057891.262 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:51.297Z,1509057891.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:51.667Z,1509057891.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:51.712Z,1509057891.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:52.091Z,1509057892.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:52.125Z,1509057892.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:52.467Z,1509057892.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:52.483Z,1509057892.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:52.861Z,1509057892.861 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:52.927Z,1509057892.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:53.306Z,1509057893.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:53.359Z,1509057893.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:53.667Z,1509057893.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:53.683Z,1509057893.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:54.065Z,1509057894.065 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:54.156Z,1509057894.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:54.477Z,1509057894.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:54.493Z,1509057894.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:54.872Z,1509057894.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:54.930Z,1509057894.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:55.274Z,1509057895.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:55.329Z,1509057895.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:55.701Z,1509057895.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:55.718Z,1509057895.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:56.084Z,1509057896.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:56.104Z,1509057896.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:56.467Z,1509057896.467 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:56.498Z,1509057896.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:56.873Z,1509057896.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:56.890Z,1509057896.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:57.274Z,1509057897.274 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:57.290Z,1509057897.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:57.658Z,1509057897.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:57.703Z,1509057897.703 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:58.064Z,1509057898.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:58.080Z,1509057898.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:58.453Z,1509057898.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:58.494Z,1509057898.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:58.909Z,1509057898.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:58.969Z,1509057898.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:59.260Z,1509057899.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:59.292Z,1509057899.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:44:59.669Z,1509057899.669 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:44:59.685Z,1509057899.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:00.068Z,1509057900.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:00.084Z,1509057900.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:00.464Z,1509057900.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:00.495Z,1509057900.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:00.885Z,1509057900.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:00.914Z,1509057900.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:01.282Z,1509057901.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:01.299Z,1509057901.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:01.666Z,1509057901.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:01.696Z,1509057901.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:02.060Z,1509057902.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:02.095Z,1509057902.095 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:02.463Z,1509057902.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:02.498Z,1509057902.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:02.867Z,1509057902.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:02.882Z,1509057902.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:03.264Z,1509057903.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:03.301Z,1509057903.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:03.660Z,1509057903.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:03.694Z,1509057903.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:04.064Z,1509057904.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:04.094Z,1509057904.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:04.458Z,1509057904.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:04.492Z,1509057904.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:04.863Z,1509057904.863 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:04.903Z,1509057904.903 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:05.275Z,1509057905.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:05.315Z,1509057905.315 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:05.315Z,1509057905.315 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 59
2017-10-26T22:45:05.316Z,1509057905.316 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:45:05.321Z,1509057905.321 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:05.322Z,1509057905.322 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 59
2017-10-26T22:45:05.322Z,1509057905.322 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:45:05.424Z,1509057905.424 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:45:05.425Z,1509057905.425 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:45:05.671Z,1509057905.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:05.796Z,1509057905.796 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:45:05.796Z,1509057905.796 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 59
2017-10-26T22:45:05.796Z,1509057905.796 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:45:05.796Z,1509057905.796 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 59
2017-10-26T22:45:06.070Z,1509057906.070 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:06.150Z,1509057906.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:45:06.150Z,1509057906.150 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:45:06.155Z,1509057906.155 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:45:06.157Z,1509057906.157 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:45:06.158Z,1509057906.158 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:45:06.158Z,1509057906.158 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:45:06.466Z,1509057906.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:06.502Z,1509057906.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:06.858Z,1509057906.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:06.879Z,1509057906.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:07.272Z,1509057907.272 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:07.343Z,1509057907.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:07.663Z,1509057907.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:07.705Z,1509057907.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:08.062Z,1509057908.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:08.099Z,1509057908.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:08.469Z,1509057908.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:08.522Z,1509057908.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:08.870Z,1509057908.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:08.890Z,1509057908.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:09.265Z,1509057909.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:09.322Z,1509057909.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:09.671Z,1509057909.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:09.727Z,1509057909.727 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:10.069Z,1509057910.069 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:10.086Z,1509057910.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:10.463Z,1509057910.463 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:10.495Z,1509057910.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:10.856Z,1509057910.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:10.892Z,1509057910.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:11.316Z,1509057911.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:11.369Z,1509057911.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:11.665Z,1509057911.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:11.694Z,1509057911.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:12.073Z,1509057912.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:12.090Z,1509057912.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:12.479Z,1509057912.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:12.499Z,1509057912.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:12.866Z,1509057912.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:12.890Z,1509057912.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:13.288Z,1509057913.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:13.304Z,1509057913.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:13.682Z,1509057913.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:13.715Z,1509057913.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:14.061Z,1509057914.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:14.098Z,1509057914.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:14.477Z,1509057914.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:14.518Z,1509057914.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:14.871Z,1509057914.871 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:14.887Z,1509057914.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:15.267Z,1509057915.267 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:15.284Z,1509057915.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:15.658Z,1509057915.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:15.707Z,1509057915.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:16.056Z,1509057916.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:16.098Z,1509057916.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:16.474Z,1509057916.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:16.493Z,1509057916.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:16.873Z,1509057916.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:16.889Z,1509057916.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:17.263Z,1509057917.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:17.299Z,1509057917.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:17.665Z,1509057917.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:17.698Z,1509057917.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:18.061Z,1509057918.061 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:18.081Z,1509057918.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:18.470Z,1509057918.470 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:18.487Z,1509057918.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:18.864Z,1509057918.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:18.888Z,1509057918.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:19.257Z,1509057919.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:19.286Z,1509057919.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:19.670Z,1509057919.670 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:19.694Z,1509057919.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:20.067Z,1509057920.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:20.147Z,1509057920.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:20.473Z,1509057920.473 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:20.492Z,1509057920.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:20.864Z,1509057920.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:20.896Z,1509057920.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:21.278Z,1509057921.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:21.321Z,1509057921.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:21.677Z,1509057921.677 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:21.714Z,1509057921.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:22.071Z,1509057922.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:22.145Z,1509057922.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:22.476Z,1509057922.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:22.493Z,1509057922.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:22.868Z,1509057922.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:22.885Z,1509057922.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:23.286Z,1509057923.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:23.343Z,1509057923.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:23.660Z,1509057923.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:23.701Z,1509057923.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:24.057Z,1509057924.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:24.103Z,1509057924.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:24.466Z,1509057924.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:24.514Z,1509057924.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:24.867Z,1509057924.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:24.900Z,1509057924.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:25.294Z,1509057925.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:25.341Z,1509057925.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:25.656Z,1509057925.656 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:25.715Z,1509057925.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:26.063Z,1509057926.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:26.088Z,1509057926.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:26.466Z,1509057926.466 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:26.483Z,1509057926.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:26.873Z,1509057926.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:26.899Z,1509057926.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:27.269Z,1509057927.269 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:27.294Z,1509057927.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:27.675Z,1509057927.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:27.730Z,1509057927.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:28.038Z,1509057928.038 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:45:28.076Z,1509057928.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:28.100Z,1509057928.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:28.472Z,1509057928.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:28.489Z,1509057928.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:28.875Z,1509057928.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:28.892Z,1509057928.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:29.265Z,1509057929.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:29.294Z,1509057929.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:29.682Z,1509057929.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:29.715Z,1509057929.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:30.060Z,1509057930.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:30.076Z,1509057930.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:30.640Z,1509057930.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:30.670Z,1509057930.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:31.044Z,1509057931.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:31.084Z,1509057931.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:31.445Z,1509057931.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:31.461Z,1509057931.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:31.854Z,1509057931.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:31.895Z,1509057931.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:32.253Z,1509057932.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:32.269Z,1509057932.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:32.652Z,1509057932.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:32.669Z,1509057932.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:33.058Z,1509057933.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:33.080Z,1509057933.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:33.464Z,1509057933.464 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:33.481Z,1509057933.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:33.853Z,1509057933.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:33.895Z,1509057933.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:34.257Z,1509057934.257 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:34.290Z,1509057934.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:34.658Z,1509057934.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:34.697Z,1509057934.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:35.048Z,1509057935.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:35.077Z,1509057935.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:35.451Z,1509057935.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:35.534Z,1509057935.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:35.853Z,1509057935.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:35.902Z,1509057935.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:36.250Z,1509057936.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:36.291Z,1509057936.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:36.649Z,1509057936.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:36.705Z,1509057936.705 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:37.085Z,1509057937.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:37.161Z,1509057937.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:37.455Z,1509057937.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:37.497Z,1509057937.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:37.854Z,1509057937.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:37.905Z,1509057937.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:38.250Z,1509057938.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:38.275Z,1509057938.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:38.655Z,1509057938.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:38.708Z,1509057938.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:39.048Z,1509057939.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:39.105Z,1509057939.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:39.651Z,1509057939.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:39.667Z,1509057939.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:40.057Z,1509057940.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:40.073Z,1509057940.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:40.443Z,1509057940.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:40.472Z,1509057940.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:40.843Z,1509057940.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:40.860Z,1509057940.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:41.247Z,1509057941.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:41.264Z,1509057941.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:41.650Z,1509057941.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:41.701Z,1509057941.701 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:42.060Z,1509057942.060 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:42.078Z,1509057942.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:42.442Z,1509057942.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:42.479Z,1509057942.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:42.846Z,1509057942.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:42.883Z,1509057942.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:43.246Z,1509057943.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:43.272Z,1509057943.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:43.664Z,1509057943.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:43.716Z,1509057943.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:44.055Z,1509057944.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:44.076Z,1509057944.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:44.455Z,1509057944.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:44.471Z,1509057944.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:44.842Z,1509057944.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:44.883Z,1509057944.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:45.244Z,1509057945.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:45.272Z,1509057945.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:45.647Z,1509057945.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:45.675Z,1509057945.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:46.043Z,1509057946.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:46.083Z,1509057946.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:46.448Z,1509057946.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:46.484Z,1509057946.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:46.847Z,1509057946.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:46.864Z,1509057946.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:47.243Z,1509057947.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:47.280Z,1509057947.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:47.646Z,1509057947.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:47.676Z,1509057947.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:48.038Z,1509057948.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:48.082Z,1509057948.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:48.445Z,1509057948.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:48.470Z,1509057948.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:48.850Z,1509057948.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:48.926Z,1509057948.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:49.252Z,1509057949.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:49.269Z,1509057949.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:49.644Z,1509057949.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:49.676Z,1509057949.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:50.037Z,1509057950.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:50.075Z,1509057950.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:50.438Z,1509057950.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:50.474Z,1509057950.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:50.842Z,1509057950.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:50.956Z,1509057950.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:51.251Z,1509057951.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:51.301Z,1509057951.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:51.750Z,1509057951.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:51.800Z,1509057951.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:52.186Z,1509057952.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:52.223Z,1509057952.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:52.553Z,1509057952.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:52.629Z,1509057952.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:52.956Z,1509057952.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:53.027Z,1509057953.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:53.359Z,1509057953.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:53.411Z,1509057953.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:53.757Z,1509057953.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:53.816Z,1509057953.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:54.171Z,1509057954.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:54.233Z,1509057954.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:54.565Z,1509057954.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:54.582Z,1509057954.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:54.965Z,1509057954.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:55.029Z,1509057955.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:55.370Z,1509057955.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:55.412Z,1509057955.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:55.761Z,1509057955.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:55.822Z,1509057955.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:56.178Z,1509057956.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:56.226Z,1509057956.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:56.565Z,1509057956.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:56.610Z,1509057956.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:56.968Z,1509057956.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:57.030Z,1509057957.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:57.355Z,1509057957.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:57.392Z,1509057957.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:57.756Z,1509057957.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:57.786Z,1509057957.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:58.170Z,1509057958.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:58.225Z,1509057958.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:58.567Z,1509057958.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:58.614Z,1509057958.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:58.966Z,1509057958.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:59.033Z,1509057959.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:59.356Z,1509057959.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:59.423Z,1509057959.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:45:59.763Z,1509057959.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:45:59.778Z,1509057959.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:00.166Z,1509057960.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:00.212Z,1509057960.212 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:00.565Z,1509057960.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:00.581Z,1509057960.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:01.007Z,1509057961.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:01.031Z,1509057961.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:01.372Z,1509057961.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:01.425Z,1509057961.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:01.779Z,1509057961.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:01.813Z,1509057961.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:02.171Z,1509057962.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:02.224Z,1509057962.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:02.554Z,1509057962.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:02.587Z,1509057962.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:02.972Z,1509057962.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:03.005Z,1509057963.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:03.381Z,1509057963.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:03.422Z,1509057963.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:03.759Z,1509057963.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:03.801Z,1509057963.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:04.171Z,1509057964.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:04.210Z,1509057964.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:04.572Z,1509057964.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:04.611Z,1509057964.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:04.971Z,1509057964.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:05.019Z,1509057965.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:05.359Z,1509057965.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:05.414Z,1509057965.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:05.777Z,1509057965.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:05.863Z,1509057965.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:06.175Z,1509057966.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:06.201Z,1509057966.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:06.559Z,1509057966.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:06.599Z,1509057966.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:06.953Z,1509057966.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:07.016Z,1509057967.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:07.354Z,1509057967.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:07.414Z,1509057967.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:07.760Z,1509057967.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:07.813Z,1509057967.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:08.165Z,1509057968.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:08.239Z,1509057968.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:08.569Z,1509057968.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:08.595Z,1509057968.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:08.967Z,1509057968.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:08.991Z,1509057968.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:09.369Z,1509057969.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:09.409Z,1509057969.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:09.756Z,1509057969.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:09.795Z,1509057969.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:10.164Z,1509057970.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:10.228Z,1509057970.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:10.562Z,1509057970.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:10.635Z,1509057970.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:10.960Z,1509057970.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:11.017Z,1509057971.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:11.381Z,1509057971.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:11.411Z,1509057971.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:11.773Z,1509057971.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:11.819Z,1509057971.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:12.183Z,1509057972.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:12.227Z,1509057972.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:12.565Z,1509057972.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:12.608Z,1509057972.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:12.964Z,1509057972.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:13.030Z,1509057973.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:13.374Z,1509057973.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:13.390Z,1509057973.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:13.766Z,1509057973.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:13.787Z,1509057973.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:14.182Z,1509057974.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:14.252Z,1509057974.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:14.559Z,1509057974.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:14.610Z,1509057974.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:14.962Z,1509057974.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:15.036Z,1509057975.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:15.366Z,1509057975.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:15.397Z,1509057975.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:15.761Z,1509057975.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:15.821Z,1509057975.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:16.214Z,1509057976.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:16.231Z,1509057976.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:16.570Z,1509057976.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:16.625Z,1509057976.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:16.982Z,1509057976.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:17.046Z,1509057977.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:17.360Z,1509057977.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:17.376Z,1509057977.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:17.764Z,1509057977.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:17.813Z,1509057977.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:18.168Z,1509057978.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:18.218Z,1509057978.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:18.567Z,1509057978.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:18.584Z,1509057978.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:19.020Z,1509057979.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:19.060Z,1509057979.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:19.383Z,1509057979.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:19.413Z,1509057979.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:19.772Z,1509057979.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:19.832Z,1509057979.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:20.172Z,1509057980.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:20.244Z,1509057980.244 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:20.555Z,1509057980.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:20.593Z,1509057980.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:20.962Z,1509057980.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:21.042Z,1509057981.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:21.368Z,1509057981.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:21.402Z,1509057981.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:21.775Z,1509057981.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:21.831Z,1509057981.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:22.173Z,1509057982.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:22.213Z,1509057982.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:22.559Z,1509057982.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:22.625Z,1509057982.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:23.016Z,1509057983.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:23.077Z,1509057983.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:23.359Z,1509057983.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:23.413Z,1509057983.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:23.774Z,1509057983.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:23.802Z,1509057983.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:24.190Z,1509057984.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:24.222Z,1509057984.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:24.563Z,1509057984.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:24.629Z,1509057984.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:24.958Z,1509057984.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:25.032Z,1509057985.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:25.358Z,1509057985.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:25.395Z,1509057985.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:25.764Z,1509057985.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:25.817Z,1509057985.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:26.169Z,1509057986.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:26.185Z,1509057986.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:26.575Z,1509057986.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:26.618Z,1509057986.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:27.029Z,1509057987.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:27.086Z,1509057987.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:27.362Z,1509057987.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:27.429Z,1509057987.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:27.760Z,1509057987.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:27.796Z,1509057987.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:28.161Z,1509057988.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:28.209Z,1509057988.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:28.540Z,1509057988.540 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:46:28.573Z,1509057988.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:28.612Z,1509057988.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:28.966Z,1509057988.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:29.028Z,1509057989.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:29.375Z,1509057989.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:29.418Z,1509057989.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:29.759Z,1509057989.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:29.793Z,1509057989.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:30.161Z,1509057990.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:30.213Z,1509057990.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:30.557Z,1509057990.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:30.617Z,1509057990.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:30.966Z,1509057990.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:31.018Z,1509057991.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:31.367Z,1509057991.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:31.397Z,1509057991.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:31.770Z,1509057991.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:31.795Z,1509057991.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:32.178Z,1509057992.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:32.250Z,1509057992.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:32.559Z,1509057992.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:32.614Z,1509057992.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:33.004Z,1509057993.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:33.058Z,1509057993.058 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:33.380Z,1509057993.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:33.434Z,1509057993.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:33.754Z,1509057993.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:33.809Z,1509057993.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:34.165Z,1509057994.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:34.220Z,1509057994.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:34.559Z,1509057994.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:34.607Z,1509057994.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:34.975Z,1509057994.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:35.083Z,1509057995.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:35.356Z,1509057995.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:35.408Z,1509057995.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:35.761Z,1509057995.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:35.816Z,1509057995.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:36.169Z,1509057996.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:36.186Z,1509057996.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:36.567Z,1509057996.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:36.614Z,1509057996.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:37.003Z,1509057997.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:37.081Z,1509057997.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:37.373Z,1509057997.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:37.420Z,1509057997.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:37.766Z,1509057997.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:37.782Z,1509057997.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:38.173Z,1509057998.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:38.197Z,1509057998.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:38.556Z,1509057998.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:38.593Z,1509057998.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:39.010Z,1509057999.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:39.054Z,1509057999.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:39.361Z,1509057999.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:39.414Z,1509057999.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:39.768Z,1509057999.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:39.798Z,1509057999.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:40.183Z,1509058000.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:40.202Z,1509058000.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:40.555Z,1509058000.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:40.588Z,1509058000.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:41.013Z,1509058001.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:41.092Z,1509058001.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:41.371Z,1509058001.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:41.406Z,1509058001.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:41.759Z,1509058001.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:41.793Z,1509058001.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:42.172Z,1509058002.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:42.203Z,1509058002.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:42.560Z,1509058002.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:42.603Z,1509058002.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:43.013Z,1509058003.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:43.061Z,1509058003.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:43.356Z,1509058003.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:43.472Z,1509058003.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:43.771Z,1509058003.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:43.793Z,1509058003.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:44.168Z,1509058004.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:44.189Z,1509058004.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:44.558Z,1509058004.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:44.605Z,1509058004.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:44.965Z,1509058004.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:45.019Z,1509058005.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:45.384Z,1509058005.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:45.419Z,1509058005.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:45.764Z,1509058005.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:45.780Z,1509058005.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:46.171Z,1509058006.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:46.225Z,1509058006.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:46.568Z,1509058006.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:46.592Z,1509058006.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:46.991Z,1509058006.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:47.072Z,1509058007.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:47.367Z,1509058007.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:47.416Z,1509058007.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:47.765Z,1509058007.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:47.789Z,1509058007.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:48.181Z,1509058008.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:48.222Z,1509058008.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:48.555Z,1509058008.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:48.590Z,1509058008.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:49.009Z,1509058009.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:49.064Z,1509058009.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:49.372Z,1509058009.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:49.442Z,1509058009.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:49.765Z,1509058009.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:49.789Z,1509058009.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:50.177Z,1509058010.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:50.235Z,1509058010.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:50.554Z,1509058010.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:50.609Z,1509058010.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:50.956Z,1509058010.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:51.031Z,1509058011.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:51.359Z,1509058011.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:51.429Z,1509058011.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:51.755Z,1509058011.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:51.790Z,1509058011.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:52.161Z,1509058012.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:52.180Z,1509058012.180 [BPC1](ERROR): Failed to receive battery data
2017-10-26T22:46:52.180Z,1509058012.180 [BPC1] Communications Fault, FailCount= 1
2017-10-26T22:46:52.180Z,1509058012.180 [BPC1](ERROR): Communications Fault
2017-10-26T22:46:52.213Z,1509058012.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:52.329Z,1509058012.329 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T22:46:52.567Z,1509058012.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:52.601Z,1509058012.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:52.999Z,1509058012.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:53.040Z,1509058013.040 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:53.359Z,1509058013.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:53.427Z,1509058013.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:53.527Z,1509058013.527 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:46:53.527Z,1509058013.527 [BPC1] No Fault, FailCount= 1
2017-10-26T22:46:53.753Z,1509058013.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:53.853Z,1509058013.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:54.162Z,1509058014.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:54.216Z,1509058014.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:54.560Z,1509058014.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:54.598Z,1509058014.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:54.981Z,1509058014.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:55.025Z,1509058015.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:55.368Z,1509058015.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:55.407Z,1509058015.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:55.760Z,1509058015.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:55.782Z,1509058015.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:56.176Z,1509058016.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:56.200Z,1509058016.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:56.554Z,1509058016.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:56.595Z,1509058016.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:56.973Z,1509058016.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:57.049Z,1509058017.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:57.375Z,1509058017.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:57.417Z,1509058017.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:57.761Z,1509058017.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:57.795Z,1509058017.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:58.169Z,1509058018.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:58.231Z,1509058018.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:58.558Z,1509058018.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:58.608Z,1509058018.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:59.008Z,1509058019.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:59.053Z,1509058019.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:59.384Z,1509058019.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:59.422Z,1509058019.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:46:59.773Z,1509058019.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:46:59.846Z,1509058019.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:00.169Z,1509058020.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:00.185Z,1509058020.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:00.569Z,1509058020.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:00.608Z,1509058020.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:00.984Z,1509058020.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:01.012Z,1509058021.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:01.373Z,1509058021.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:01.421Z,1509058021.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:01.768Z,1509058021.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:01.784Z,1509058021.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:02.169Z,1509058022.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:02.211Z,1509058022.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:02.566Z,1509058022.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:02.590Z,1509058022.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:02.966Z,1509058022.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:03.025Z,1509058023.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:03.356Z,1509058023.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:03.421Z,1509058023.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:03.754Z,1509058023.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:03.828Z,1509058023.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:04.165Z,1509058024.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:04.206Z,1509058024.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:04.567Z,1509058024.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:04.590Z,1509058024.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:05.016Z,1509058025.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:05.061Z,1509058025.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:05.365Z,1509058025.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:05.449Z,1509058025.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:05.763Z,1509058025.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:05.815Z,1509058025.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:06.174Z,1509058026.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:06.190Z,1509058026.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:06.567Z,1509058026.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:06.589Z,1509058026.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:07.003Z,1509058027.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:07.075Z,1509058027.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:07.356Z,1509058027.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:07.406Z,1509058027.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:07.754Z,1509058027.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:07.794Z,1509058027.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:08.167Z,1509058028.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:08.206Z,1509058028.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:08.568Z,1509058028.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:08.614Z,1509058028.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:09.003Z,1509058029.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:09.081Z,1509058029.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:09.358Z,1509058029.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:09.421Z,1509058029.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:09.765Z,1509058029.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:09.809Z,1509058029.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:10.163Z,1509058030.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:10.180Z,1509058030.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:10.583Z,1509058030.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:10.649Z,1509058030.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:10.994Z,1509058030.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:11.039Z,1509058031.039 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:11.363Z,1509058031.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:11.436Z,1509058031.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:11.753Z,1509058031.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:11.769Z,1509058031.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:12.162Z,1509058032.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:12.225Z,1509058032.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:12.571Z,1509058032.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:12.616Z,1509058032.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:13.019Z,1509058033.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:13.075Z,1509058033.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:13.367Z,1509058033.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:13.415Z,1509058033.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:13.757Z,1509058033.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:13.811Z,1509058033.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:14.172Z,1509058034.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:14.196Z,1509058034.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:14.564Z,1509058034.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:14.581Z,1509058034.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:14.957Z,1509058034.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:15.012Z,1509058035.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:15.360Z,1509058035.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:15.406Z,1509058035.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:15.757Z,1509058035.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:15.794Z,1509058035.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:16.194Z,1509058036.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:16.236Z,1509058036.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:16.559Z,1509058036.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:16.658Z,1509058036.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:16.961Z,1509058036.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:17.014Z,1509058037.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:17.373Z,1509058037.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:17.413Z,1509058037.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:17.769Z,1509058037.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:17.808Z,1509058037.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:18.171Z,1509058038.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:18.210Z,1509058038.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:18.566Z,1509058038.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:18.601Z,1509058038.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:18.966Z,1509058038.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:19.000Z,1509058039.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:19.350Z,1509058039.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:19.383Z,1509058039.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:19.765Z,1509058039.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:19.816Z,1509058039.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:20.240Z,1509058040.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:20.262Z,1509058040.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:20.556Z,1509058040.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:20.604Z,1509058040.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:20.966Z,1509058040.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:21.013Z,1509058041.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:21.367Z,1509058041.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:21.394Z,1509058041.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:21.760Z,1509058041.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:21.834Z,1509058041.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:22.395Z,1509058042.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:22.411Z,1509058042.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:22.797Z,1509058042.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:22.820Z,1509058042.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:23.189Z,1509058043.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:23.246Z,1509058043.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:23.590Z,1509058043.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:23.606Z,1509058043.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:23.994Z,1509058043.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:24.068Z,1509058044.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:24.378Z,1509058044.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:24.413Z,1509058044.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:24.795Z,1509058044.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:24.817Z,1509058044.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:25.204Z,1509058045.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:25.261Z,1509058045.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:25.588Z,1509058045.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:25.604Z,1509058045.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:25.997Z,1509058045.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:26.050Z,1509058046.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:26.386Z,1509058046.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:26.436Z,1509058046.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:26.780Z,1509058046.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:26.797Z,1509058046.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:27.188Z,1509058047.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:27.204Z,1509058047.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:27.589Z,1509058047.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:27.609Z,1509058047.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:27.992Z,1509058047.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:28.014Z,1509058048.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:28.391Z,1509058048.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:28.407Z,1509058048.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:28.757Z,1509058048.757 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:47:28.797Z,1509058048.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:28.814Z,1509058048.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:29.184Z,1509058049.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:29.220Z,1509058049.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:29.580Z,1509058049.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:29.613Z,1509058049.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:29.989Z,1509058049.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:30.020Z,1509058050.020 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:30.382Z,1509058050.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:30.398Z,1509058050.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:30.780Z,1509058050.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:30.796Z,1509058050.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:31.191Z,1509058051.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:31.223Z,1509058051.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:31.581Z,1509058051.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:31.618Z,1509058051.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:31.991Z,1509058051.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:32.030Z,1509058052.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:32.388Z,1509058052.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:32.405Z,1509058052.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:32.936Z,1509058052.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:33.066Z,1509058053.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:33.322Z,1509058053.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:33.358Z,1509058053.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:33.734Z,1509058053.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:33.759Z,1509058053.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:34.125Z,1509058054.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:34.163Z,1509058054.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:34.521Z,1509058054.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:34.559Z,1509058054.559 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:34.965Z,1509058054.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:34.996Z,1509058054.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:35.340Z,1509058055.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:35.387Z,1509058055.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:35.719Z,1509058055.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:35.757Z,1509058055.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:36.133Z,1509058056.133 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:36.169Z,1509058056.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:36.530Z,1509058056.530 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:36.556Z,1509058056.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:36.992Z,1509058056.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:37.064Z,1509058057.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:37.324Z,1509058057.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:37.406Z,1509058057.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:37.740Z,1509058057.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:37.756Z,1509058057.756 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:38.157Z,1509058058.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:38.186Z,1509058058.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:38.525Z,1509058058.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:38.575Z,1509058058.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:39.005Z,1509058059.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:39.021Z,1509058059.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:39.328Z,1509058059.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:39.398Z,1509058059.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:39.731Z,1509058059.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:39.747Z,1509058059.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:40.147Z,1509058060.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:40.209Z,1509058060.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:40.514Z,1509058060.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:40.563Z,1509058060.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:40.980Z,1509058060.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:41.051Z,1509058061.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:41.337Z,1509058061.337 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:41.385Z,1509058061.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:41.736Z,1509058061.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:41.753Z,1509058061.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:42.147Z,1509058062.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:42.180Z,1509058062.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:42.520Z,1509058062.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:42.549Z,1509058062.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:42.967Z,1509058062.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:42.998Z,1509058062.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:43.333Z,1509058063.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:43.349Z,1509058063.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:43.733Z,1509058063.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:43.750Z,1509058063.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:44.130Z,1509058064.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:44.184Z,1509058064.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:44.528Z,1509058064.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:44.569Z,1509058064.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:44.961Z,1509058064.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:45.024Z,1509058065.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:45.321Z,1509058065.321 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:45.337Z,1509058065.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:45.733Z,1509058065.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:45.771Z,1509058065.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:46.247Z,1509058066.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:46.283Z,1509058066.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:46.640Z,1509058066.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:46.683Z,1509058066.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:47.046Z,1509058067.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:47.062Z,1509058067.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:47.433Z,1509058067.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:47.470Z,1509058067.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:47.838Z,1509058067.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:47.866Z,1509058067.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:48.242Z,1509058068.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:48.280Z,1509058068.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:48.635Z,1509058068.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:48.664Z,1509058068.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:49.034Z,1509058069.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:49.055Z,1509058069.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:49.447Z,1509058069.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:49.464Z,1509058069.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:49.844Z,1509058069.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:49.861Z,1509058069.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:50.246Z,1509058070.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:50.284Z,1509058070.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:50.636Z,1509058070.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:50.667Z,1509058070.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:51.055Z,1509058071.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:51.074Z,1509058071.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:51.447Z,1509058071.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:51.477Z,1509058071.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:51.841Z,1509058071.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:51.902Z,1509058071.902 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:52.246Z,1509058072.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:52.302Z,1509058072.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:52.643Z,1509058072.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:52.690Z,1509058072.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:53.046Z,1509058073.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:53.062Z,1509058073.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:53.435Z,1509058073.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:53.485Z,1509058073.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:53.835Z,1509058073.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:53.871Z,1509058073.871 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:54.241Z,1509058074.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:54.289Z,1509058074.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:54.635Z,1509058074.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:54.664Z,1509058074.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:55.050Z,1509058075.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:55.104Z,1509058075.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:55.451Z,1509058075.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:55.467Z,1509058075.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:55.855Z,1509058075.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:55.872Z,1509058075.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:56.247Z,1509058076.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:56.273Z,1509058076.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:56.642Z,1509058076.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:56.672Z,1509058076.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:57.053Z,1509058077.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:57.085Z,1509058077.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:57.451Z,1509058077.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:57.481Z,1509058077.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:57.839Z,1509058077.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:57.883Z,1509058077.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:58.243Z,1509058078.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:58.259Z,1509058078.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:58.644Z,1509058078.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:58.660Z,1509058078.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:59.054Z,1509058079.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:59.070Z,1509058079.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:59.444Z,1509058079.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:59.484Z,1509058079.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:47:59.843Z,1509058079.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:47:59.859Z,1509058079.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:00.231Z,1509058080.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:00.264Z,1509058080.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:00.654Z,1509058080.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:00.670Z,1509058080.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:01.049Z,1509058081.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:01.069Z,1509058081.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:01.448Z,1509058081.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:01.486Z,1509058081.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:01.854Z,1509058081.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:01.870Z,1509058081.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:02.240Z,1509058082.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:02.270Z,1509058082.270 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:02.632Z,1509058082.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:02.660Z,1509058082.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:03.063Z,1509058083.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:03.084Z,1509058083.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:03.444Z,1509058083.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:03.487Z,1509058083.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:03.847Z,1509058083.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:03.883Z,1509058083.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:04.243Z,1509058084.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:04.260Z,1509058084.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:04.658Z,1509058084.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:04.694Z,1509058084.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:05.050Z,1509058085.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:05.066Z,1509058085.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:05.438Z,1509058085.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:05.467Z,1509058085.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:05.865Z,1509058085.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:05.882Z,1509058085.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:06.245Z,1509058086.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:06.297Z,1509058086.297 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:06.298Z,1509058086.298 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 60
2017-10-26T22:48:06.298Z,1509058086.298 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:48:06.302Z,1509058086.302 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:06.330Z,1509058086.330 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 60
2017-10-26T22:48:06.330Z,1509058086.330 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:48:06.392Z,1509058086.392 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:48:06.393Z,1509058086.393 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:48:06.642Z,1509058086.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:06.800Z,1509058086.800 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:48:06.800Z,1509058086.800 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 60
2017-10-26T22:48:06.801Z,1509058086.801 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:48:06.801Z,1509058086.801 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 60
2017-10-26T22:48:07.049Z,1509058087.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:07.068Z,1509058087.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:48:07.069Z,1509058087.069 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:48:07.069Z,1509058087.069 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:48:07.088Z,1509058087.088 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:48:07.088Z,1509058087.088 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:48:07.088Z,1509058087.088 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:48:07.430Z,1509058087.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:07.463Z,1509058087.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:07.839Z,1509058087.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:07.888Z,1509058087.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:08.236Z,1509058088.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:08.273Z,1509058088.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:08.655Z,1509058088.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:08.713Z,1509058088.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:09.039Z,1509058089.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:09.064Z,1509058089.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:09.439Z,1509058089.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:09.487Z,1509058089.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:09.838Z,1509058089.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:09.877Z,1509058089.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:10.249Z,1509058090.249 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:10.289Z,1509058090.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:10.644Z,1509058090.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:10.678Z,1509058090.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:11.048Z,1509058091.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:11.065Z,1509058091.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:11.441Z,1509058091.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:11.482Z,1509058091.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:11.856Z,1509058091.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:11.877Z,1509058091.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:12.243Z,1509058092.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:12.269Z,1509058092.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:12.644Z,1509058092.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:12.681Z,1509058092.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:13.040Z,1509058093.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:13.068Z,1509058093.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:13.457Z,1509058093.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:13.473Z,1509058093.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:13.839Z,1509058093.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:13.868Z,1509058093.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:14.237Z,1509058094.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:14.277Z,1509058094.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:14.633Z,1509058094.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:14.666Z,1509058094.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:15.085Z,1509058095.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:15.147Z,1509058095.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:15.437Z,1509058095.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:15.469Z,1509058095.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:15.839Z,1509058095.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:15.855Z,1509058095.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:16.242Z,1509058096.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:16.265Z,1509058096.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:16.643Z,1509058096.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:16.659Z,1509058096.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:17.044Z,1509058097.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:17.083Z,1509058097.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:17.442Z,1509058097.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:17.459Z,1509058097.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:17.848Z,1509058097.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:17.864Z,1509058097.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:18.250Z,1509058098.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:18.267Z,1509058098.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:18.650Z,1509058098.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:18.666Z,1509058098.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:19.041Z,1509058099.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:19.072Z,1509058099.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:19.445Z,1509058099.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:19.473Z,1509058099.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:19.850Z,1509058099.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:19.899Z,1509058099.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:20.239Z,1509058100.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:20.260Z,1509058100.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:20.642Z,1509058100.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:20.658Z,1509058100.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:21.051Z,1509058101.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:21.067Z,1509058101.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:21.434Z,1509058101.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:21.500Z,1509058101.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:21.846Z,1509058101.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:21.892Z,1509058101.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:22.245Z,1509058102.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:22.298Z,1509058102.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:22.647Z,1509058102.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:22.663Z,1509058102.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:23.053Z,1509058103.053 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:23.126Z,1509058103.126 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:23.431Z,1509058103.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:23.499Z,1509058103.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:23.858Z,1509058103.858 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:23.879Z,1509058103.879 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:24.233Z,1509058104.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:24.272Z,1509058104.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:24.639Z,1509058104.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:24.678Z,1509058104.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:25.049Z,1509058105.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:25.090Z,1509058105.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:25.444Z,1509058105.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:25.472Z,1509058105.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:25.845Z,1509058105.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:25.870Z,1509058105.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:26.254Z,1509058106.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:26.271Z,1509058106.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:26.641Z,1509058106.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:26.665Z,1509058106.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:27.035Z,1509058107.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:27.085Z,1509058107.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:27.447Z,1509058107.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:27.463Z,1509058107.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:27.845Z,1509058107.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:27.861Z,1509058107.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:28.247Z,1509058108.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:28.263Z,1509058108.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:28.614Z,1509058108.614 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:48:28.648Z,1509058108.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:28.665Z,1509058108.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:29.080Z,1509058109.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:29.143Z,1509058109.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:29.439Z,1509058109.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:29.481Z,1509058109.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:29.842Z,1509058109.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:29.858Z,1509058109.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:30.245Z,1509058110.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:30.262Z,1509058110.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:30.645Z,1509058110.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:30.673Z,1509058110.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:31.056Z,1509058111.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:31.078Z,1509058111.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:31.451Z,1509058111.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:31.467Z,1509058111.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:31.855Z,1509058111.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:31.877Z,1509058111.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:32.241Z,1509058112.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:32.271Z,1509058112.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:32.639Z,1509058112.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:32.676Z,1509058112.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:33.050Z,1509058113.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:33.084Z,1509058113.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:33.440Z,1509058113.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:33.463Z,1509058113.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:33.849Z,1509058113.849 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:33.865Z,1509058113.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:34.251Z,1509058114.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:34.318Z,1509058114.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:34.641Z,1509058114.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:34.671Z,1509058114.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:35.043Z,1509058115.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:35.151Z,1509058115.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:35.445Z,1509058115.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:35.475Z,1509058115.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:35.845Z,1509058115.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:35.907Z,1509058115.907 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:36.260Z,1509058116.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:36.276Z,1509058116.276 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:36.650Z,1509058116.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:36.697Z,1509058116.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:37.032Z,1509058117.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:37.104Z,1509058117.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:37.456Z,1509058117.456 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:37.476Z,1509058117.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:37.840Z,1509058117.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:37.876Z,1509058117.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:38.242Z,1509058118.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:38.274Z,1509058118.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:38.641Z,1509058118.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:38.658Z,1509058118.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:39.035Z,1509058119.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:39.069Z,1509058119.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:39.444Z,1509058119.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:39.475Z,1509058119.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:39.839Z,1509058119.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:39.880Z,1509058119.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:40.244Z,1509058120.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:40.268Z,1509058120.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:40.644Z,1509058120.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:40.677Z,1509058120.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:41.041Z,1509058121.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:41.066Z,1509058121.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:41.625Z,1509058121.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:41.655Z,1509058121.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:42.045Z,1509058122.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:42.062Z,1509058122.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:42.437Z,1509058122.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:42.473Z,1509058122.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:42.837Z,1509058122.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:42.853Z,1509058122.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:43.242Z,1509058123.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:43.263Z,1509058123.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:43.647Z,1509058123.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:43.664Z,1509058123.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:44.041Z,1509058124.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:44.057Z,1509058124.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:44.434Z,1509058124.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:44.474Z,1509058124.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:44.826Z,1509058124.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:44.842Z,1509058124.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:45.298Z,1509058125.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:45.352Z,1509058125.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:45.628Z,1509058125.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:45.664Z,1509058125.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:46.032Z,1509058126.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:46.061Z,1509058126.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:46.443Z,1509058126.443 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:46.467Z,1509058126.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:46.838Z,1509058126.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:46.875Z,1509058126.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:47.235Z,1509058127.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:47.285Z,1509058127.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:47.647Z,1509058127.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:47.736Z,1509058127.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:48.042Z,1509058128.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:48.059Z,1509058128.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:48.426Z,1509058128.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:48.465Z,1509058128.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:48.835Z,1509058128.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:48.880Z,1509058128.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:49.235Z,1509058129.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:49.265Z,1509058129.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:49.665Z,1509058129.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:49.724Z,1509058129.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:50.031Z,1509058130.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:50.046Z,1509058130.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:50.436Z,1509058130.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:50.494Z,1509058130.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:50.836Z,1509058130.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:50.895Z,1509058130.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:51.229Z,1509058131.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:51.263Z,1509058131.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:51.630Z,1509058131.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:51.658Z,1509058131.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:52.051Z,1509058132.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:52.068Z,1509058132.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:52.437Z,1509058132.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:52.468Z,1509058132.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:52.833Z,1509058132.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:52.862Z,1509058132.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:53.263Z,1509058133.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:53.280Z,1509058133.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:53.633Z,1509058133.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:53.662Z,1509058133.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:54.021Z,1509058134.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:54.046Z,1509058134.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:54.438Z,1509058134.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:54.465Z,1509058134.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:54.838Z,1509058134.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:54.948Z,1509058134.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:55.229Z,1509058135.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:55.265Z,1509058135.265 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:55.625Z,1509058135.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:55.662Z,1509058135.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:56.030Z,1509058136.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:56.069Z,1509058136.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:56.439Z,1509058136.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:56.486Z,1509058136.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:56.836Z,1509058136.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:56.864Z,1509058136.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:57.227Z,1509058137.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:57.267Z,1509058137.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:57.641Z,1509058137.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:57.673Z,1509058137.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:58.031Z,1509058138.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:58.063Z,1509058138.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:58.431Z,1509058138.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:58.497Z,1509058138.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:58.838Z,1509058138.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:58.937Z,1509058138.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:59.239Z,1509058139.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:59.268Z,1509058139.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:48:59.633Z,1509058139.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:48:59.677Z,1509058139.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:00.036Z,1509058140.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:00.069Z,1509058140.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:00.437Z,1509058140.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:00.481Z,1509058140.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:00.833Z,1509058140.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:00.869Z,1509058140.869 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:01.232Z,1509058141.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:01.264Z,1509058141.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:01.634Z,1509058141.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:01.676Z,1509058141.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:02.031Z,1509058142.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:02.052Z,1509058142.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:02.436Z,1509058142.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:02.465Z,1509058142.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:02.843Z,1509058142.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:02.909Z,1509058142.909 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:03.225Z,1509058143.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:03.246Z,1509058143.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:03.640Z,1509058143.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:03.690Z,1509058143.690 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:04.031Z,1509058144.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:04.048Z,1509058144.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:04.487Z,1509058144.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:04.543Z,1509058144.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:04.837Z,1509058144.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:04.954Z,1509058144.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:05.241Z,1509058145.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:05.258Z,1509058145.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:05.636Z,1509058145.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:05.669Z,1509058145.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:06.033Z,1509058146.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:06.049Z,1509058146.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:06.431Z,1509058146.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:06.459Z,1509058146.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:06.845Z,1509058146.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:06.862Z,1509058146.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:07.231Z,1509058147.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:07.272Z,1509058147.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:07.644Z,1509058147.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:07.681Z,1509058147.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:08.029Z,1509058148.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:08.054Z,1509058148.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:08.433Z,1509058148.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:08.453Z,1509058148.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:08.833Z,1509058148.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:08.853Z,1509058148.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:09.226Z,1509058149.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:09.247Z,1509058149.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:09.639Z,1509058149.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:09.672Z,1509058149.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:10.038Z,1509058150.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:10.072Z,1509058150.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:10.444Z,1509058150.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:10.482Z,1509058150.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:10.843Z,1509058150.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:10.859Z,1509058150.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:11.226Z,1509058151.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:11.268Z,1509058151.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:11.626Z,1509058151.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:11.656Z,1509058151.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:12.027Z,1509058152.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:12.064Z,1509058152.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:12.434Z,1509058152.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:12.470Z,1509058152.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:12.834Z,1509058152.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:12.850Z,1509058152.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:13.359Z,1509058153.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:13.413Z,1509058153.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:13.768Z,1509058153.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:13.826Z,1509058153.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:14.168Z,1509058154.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:14.206Z,1509058154.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:14.574Z,1509058154.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:14.590Z,1509058154.590 [BPC1](ERROR): Failed to parse message.
2017-10-26T22:49:14.591Z,1509058154.591 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T22:49:14.591Z,1509058154.591 [BPC1] Data Fault, FailCount= 1
2017-10-26T22:49:14.591Z,1509058154.591 [BPC1](ERROR): Data Fault
2017-10-26T22:49:14.620Z,1509058154.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:14.767Z,1509058154.767 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T22:49:15.019Z,1509058155.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:15.052Z,1509058155.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:15.373Z,1509058155.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:15.425Z,1509058155.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:15.769Z,1509058155.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:15.815Z,1509058155.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:15.931Z,1509058155.931 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:49:15.931Z,1509058155.931 [BPC1] No Fault, FailCount= 1
2017-10-26T22:49:16.181Z,1509058156.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:16.310Z,1509058156.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:16.561Z,1509058156.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:16.602Z,1509058156.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:17.014Z,1509058157.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:17.055Z,1509058157.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:17.376Z,1509058157.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:17.424Z,1509058157.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:17.773Z,1509058157.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:17.832Z,1509058157.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:18.178Z,1509058158.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:18.202Z,1509058158.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:18.569Z,1509058158.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:18.608Z,1509058158.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:19.021Z,1509058159.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:19.064Z,1509058159.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:19.368Z,1509058159.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:19.419Z,1509058159.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:19.773Z,1509058159.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:19.813Z,1509058159.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:20.186Z,1509058160.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:20.223Z,1509058160.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:20.573Z,1509058160.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:20.627Z,1509058160.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:21.023Z,1509058161.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:21.087Z,1509058161.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:21.380Z,1509058161.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:21.426Z,1509058161.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:21.764Z,1509058161.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:21.810Z,1509058161.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:22.171Z,1509058162.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:22.209Z,1509058162.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:22.564Z,1509058162.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:22.617Z,1509058162.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:22.979Z,1509058162.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:23.041Z,1509058163.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:23.381Z,1509058163.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:23.413Z,1509058163.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:23.765Z,1509058163.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:23.795Z,1509058163.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:24.193Z,1509058164.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:24.222Z,1509058164.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:24.572Z,1509058164.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:24.611Z,1509058164.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:24.984Z,1509058164.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:25.030Z,1509058165.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:25.361Z,1509058165.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:25.416Z,1509058165.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:25.772Z,1509058165.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:25.811Z,1509058165.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:26.172Z,1509058166.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:26.203Z,1509058166.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:26.567Z,1509058166.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:26.600Z,1509058166.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:26.983Z,1509058166.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:27.023Z,1509058167.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:27.359Z,1509058167.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:27.405Z,1509058167.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:27.760Z,1509058167.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:27.809Z,1509058167.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:28.171Z,1509058168.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:28.207Z,1509058168.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:28.574Z,1509058168.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:28.623Z,1509058168.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:28.975Z,1509058168.975 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:49:29.004Z,1509058169.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:29.072Z,1509058169.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:29.382Z,1509058169.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:29.412Z,1509058169.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:29.772Z,1509058169.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:29.835Z,1509058169.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:30.169Z,1509058170.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:30.221Z,1509058170.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:30.571Z,1509058170.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:30.612Z,1509058170.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:30.970Z,1509058170.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:31.049Z,1509058171.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:31.364Z,1509058171.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:31.397Z,1509058171.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:31.782Z,1509058171.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:31.838Z,1509058171.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:32.174Z,1509058172.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:32.247Z,1509058172.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:32.569Z,1509058172.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:32.613Z,1509058172.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:32.962Z,1509058172.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:33.004Z,1509058173.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:33.375Z,1509058173.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:33.391Z,1509058173.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:33.763Z,1509058173.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:33.811Z,1509058173.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:34.173Z,1509058174.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:34.219Z,1509058174.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:34.564Z,1509058174.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:34.611Z,1509058174.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:34.971Z,1509058174.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:35.027Z,1509058175.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:35.383Z,1509058175.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:35.420Z,1509058175.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:35.771Z,1509058175.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:35.800Z,1509058175.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:36.191Z,1509058176.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:36.208Z,1509058176.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:36.562Z,1509058176.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:36.611Z,1509058176.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:36.978Z,1509058176.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:37.027Z,1509058177.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:37.375Z,1509058177.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:37.405Z,1509058177.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:37.771Z,1509058177.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:37.810Z,1509058177.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:38.179Z,1509058178.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:38.224Z,1509058178.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:38.572Z,1509058178.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:38.589Z,1509058178.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:39.004Z,1509058179.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:39.036Z,1509058179.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:39.396Z,1509058179.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:39.425Z,1509058179.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:39.770Z,1509058179.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:39.817Z,1509058179.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:40.175Z,1509058180.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:40.233Z,1509058180.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:40.575Z,1509058180.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:40.606Z,1509058180.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:40.970Z,1509058180.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:41.025Z,1509058181.025 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:41.361Z,1509058181.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:41.422Z,1509058181.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:41.762Z,1509058181.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:41.790Z,1509058181.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:42.169Z,1509058182.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:42.219Z,1509058182.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:42.572Z,1509058182.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:42.604Z,1509058182.604 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:42.993Z,1509058182.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:43.029Z,1509058183.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:43.371Z,1509058183.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:43.387Z,1509058183.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:43.770Z,1509058183.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:43.806Z,1509058183.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:44.185Z,1509058184.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:44.289Z,1509058184.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:44.570Z,1509058184.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:44.602Z,1509058184.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:45.011Z,1509058185.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:45.067Z,1509058185.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:45.369Z,1509058185.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:45.404Z,1509058185.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:45.770Z,1509058185.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:45.853Z,1509058185.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:46.172Z,1509058186.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:46.221Z,1509058186.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:46.577Z,1509058186.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:46.593Z,1509058186.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:47.010Z,1509058187.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:47.050Z,1509058187.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:47.385Z,1509058187.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:47.419Z,1509058187.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:47.774Z,1509058187.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:47.823Z,1509058187.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:48.174Z,1509058188.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:48.211Z,1509058188.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:48.578Z,1509058188.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:48.603Z,1509058188.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:49.009Z,1509058189.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:49.050Z,1509058189.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:49.385Z,1509058189.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:49.431Z,1509058189.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:49.772Z,1509058189.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:49.789Z,1509058189.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:50.177Z,1509058190.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:50.201Z,1509058190.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:50.580Z,1509058190.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:50.602Z,1509058190.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:51.003Z,1509058191.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:51.055Z,1509058191.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:51.374Z,1509058191.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:51.413Z,1509058191.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:51.777Z,1509058191.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:51.815Z,1509058191.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:52.169Z,1509058192.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:52.209Z,1509058192.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:52.575Z,1509058192.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:52.591Z,1509058192.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:52.963Z,1509058192.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:53.007Z,1509058193.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:53.368Z,1509058193.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:53.387Z,1509058193.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:53.773Z,1509058193.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:53.809Z,1509058193.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:54.172Z,1509058194.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:54.223Z,1509058194.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:54.572Z,1509058194.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:54.588Z,1509058194.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:55.008Z,1509058195.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:55.044Z,1509058195.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:55.410Z,1509058195.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:55.426Z,1509058195.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:55.770Z,1509058195.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:55.819Z,1509058195.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:56.183Z,1509058196.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:56.215Z,1509058196.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:56.576Z,1509058196.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:56.609Z,1509058196.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:57.013Z,1509058197.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:57.062Z,1509058197.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:57.366Z,1509058197.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:57.426Z,1509058197.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:57.767Z,1509058197.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:57.783Z,1509058197.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:58.171Z,1509058198.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:58.263Z,1509058198.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:58.583Z,1509058198.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:58.615Z,1509058198.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:59.004Z,1509058199.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:59.077Z,1509058199.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:59.366Z,1509058199.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:59.410Z,1509058199.410 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:49:59.762Z,1509058199.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:49:59.821Z,1509058199.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:00.172Z,1509058200.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:00.234Z,1509058200.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:00.583Z,1509058200.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:00.633Z,1509058200.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:01.007Z,1509058201.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:01.044Z,1509058201.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:01.363Z,1509058201.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:01.408Z,1509058201.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:01.776Z,1509058201.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:01.799Z,1509058201.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:02.176Z,1509058202.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:02.227Z,1509058202.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:02.573Z,1509058202.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:02.595Z,1509058202.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:03.013Z,1509058203.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:03.079Z,1509058203.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:03.370Z,1509058203.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:03.419Z,1509058203.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:03.949Z,1509058203.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:03.956Z,1509058203.956 [PNI_TCM](ERROR): CRC does not match. Expected:0x11916 got:0x46464
2017-10-26T22:50:03.994Z,1509058203.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:04.358Z,1509058204.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:04.392Z,1509058204.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:04.763Z,1509058204.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:04.797Z,1509058204.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:05.162Z,1509058205.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:05.213Z,1509058205.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:05.557Z,1509058205.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:05.587Z,1509058205.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:05.970Z,1509058205.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:05.986Z,1509058205.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:06.360Z,1509058206.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:06.377Z,1509058206.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:06.758Z,1509058206.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:06.795Z,1509058206.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:07.168Z,1509058207.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:07.197Z,1509058207.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:07.570Z,1509058207.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:07.586Z,1509058207.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:07.965Z,1509058207.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:07.982Z,1509058207.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:08.362Z,1509058208.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:08.379Z,1509058208.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:08.771Z,1509058208.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:08.794Z,1509058208.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:09.172Z,1509058209.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:09.194Z,1509058209.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:09.583Z,1509058209.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:09.655Z,1509058209.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:09.956Z,1509058209.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:09.974Z,1509058209.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:10.361Z,1509058210.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:10.378Z,1509058210.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:10.757Z,1509058210.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:10.779Z,1509058210.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:11.167Z,1509058211.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:11.184Z,1509058211.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:11.589Z,1509058211.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:11.663Z,1509058211.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:11.955Z,1509058211.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:11.986Z,1509058211.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:12.348Z,1509058212.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:12.397Z,1509058212.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:12.753Z,1509058212.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:12.817Z,1509058212.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:13.173Z,1509058213.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:13.216Z,1509058213.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:13.573Z,1509058213.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:13.589Z,1509058213.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:13.951Z,1509058213.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:13.992Z,1509058213.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:14.357Z,1509058214.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:14.408Z,1509058214.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:14.759Z,1509058214.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:14.776Z,1509058214.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:15.156Z,1509058215.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:15.206Z,1509058215.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:15.562Z,1509058215.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:15.614Z,1509058215.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:15.967Z,1509058215.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:15.984Z,1509058215.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:16.371Z,1509058216.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:16.415Z,1509058216.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:16.781Z,1509058216.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:16.802Z,1509058216.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:17.161Z,1509058217.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:17.197Z,1509058217.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:17.551Z,1509058217.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:17.573Z,1509058217.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:17.964Z,1509058217.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:17.000Z,1509058218.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:18.368Z,1509058218.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:18.385Z,1509058218.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:18.748Z,1509058218.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:18.783Z,1509058218.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:19.154Z,1509058219.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:19.199Z,1509058219.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:19.559Z,1509058219.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:19.586Z,1509058219.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:19.980Z,1509058219.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:20.028Z,1509058220.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:20.388Z,1509058220.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:20.414Z,1509058220.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:20.755Z,1509058220.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:20.772Z,1509058220.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:21.314Z,1509058221.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:21.363Z,1509058221.363 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:21.695Z,1509058221.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:21.711Z,1509058221.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:22.098Z,1509058222.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:22.132Z,1509058222.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:22.486Z,1509058222.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:22.527Z,1509058222.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:22.886Z,1509058222.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:22.923Z,1509058222.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:23.285Z,1509058223.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:23.301Z,1509058223.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:23.710Z,1509058223.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:23.736Z,1509058223.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:24.095Z,1509058224.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:24.143Z,1509058224.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:24.497Z,1509058224.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:24.532Z,1509058224.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:24.888Z,1509058224.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:24.918Z,1509058224.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:25.288Z,1509058225.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:25.321Z,1509058225.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:25.701Z,1509058225.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:25.732Z,1509058225.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:26.098Z,1509058226.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:26.151Z,1509058226.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:26.492Z,1509058226.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:26.520Z,1509058226.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:26.889Z,1509058226.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:26.982Z,1509058226.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:27.287Z,1509058227.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:27.325Z,1509058227.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:27.692Z,1509058227.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:27.769Z,1509058227.769 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:28.096Z,1509058228.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:28.130Z,1509058228.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:28.491Z,1509058228.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:28.546Z,1509058228.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:28.896Z,1509058228.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:29.029Z,1509058229.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:29.269Z,1509058229.269 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:50:29.299Z,1509058229.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:29.344Z,1509058229.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:29.690Z,1509058229.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:29.716Z,1509058229.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:30.120Z,1509058230.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:30.204Z,1509058230.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:30.489Z,1509058230.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:30.519Z,1509058230.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:30.885Z,1509058230.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:30.983Z,1509058230.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:31.298Z,1509058231.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:31.315Z,1509058231.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:31.692Z,1509058231.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:31.709Z,1509058231.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:32.094Z,1509058232.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:32.157Z,1509058232.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:32.486Z,1509058232.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:32.523Z,1509058232.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:32.892Z,1509058232.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:32.920Z,1509058232.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:33.302Z,1509058233.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:33.346Z,1509058233.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:33.695Z,1509058233.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:33.711Z,1509058233.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:34.091Z,1509058234.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:34.107Z,1509058234.107 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:34.510Z,1509058234.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:34.526Z,1509058234.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:34.883Z,1509058234.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:34.911Z,1509058234.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:35.304Z,1509058235.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:35.325Z,1509058235.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:35.684Z,1509058235.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:35.725Z,1509058235.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:36.117Z,1509058236.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:36.146Z,1509058236.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:36.490Z,1509058236.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:36.518Z,1509058236.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:36.900Z,1509058236.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:36.938Z,1509058236.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:37.291Z,1509058237.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:37.312Z,1509058237.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:37.704Z,1509058237.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:37.741Z,1509058237.741 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:38.098Z,1509058238.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:38.145Z,1509058238.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:38.503Z,1509058238.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:38.521Z,1509058238.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:38.883Z,1509058238.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:38.912Z,1509058238.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:39.450Z,1509058239.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:39.467Z,1509058239.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:39.839Z,1509058239.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:39.874Z,1509058239.874 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:40.243Z,1509058240.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:40.291Z,1509058240.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:40.637Z,1509058240.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:40.671Z,1509058240.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:41.035Z,1509058241.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:41.051Z,1509058241.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:41.429Z,1509058241.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:41.466Z,1509058241.466 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:41.826Z,1509058241.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:41.861Z,1509058241.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:42.234Z,1509058242.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:42.303Z,1509058242.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:42.642Z,1509058242.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:42.659Z,1509058242.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:43.034Z,1509058243.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:43.089Z,1509058243.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:43.435Z,1509058243.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:43.459Z,1509058243.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:43.837Z,1509058243.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:43.893Z,1509058243.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:44.244Z,1509058244.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:44.302Z,1509058244.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:44.628Z,1509058244.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:44.666Z,1509058244.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:45.032Z,1509058245.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:45.064Z,1509058245.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:45.441Z,1509058245.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:45.471Z,1509058245.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:45.833Z,1509058245.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:45.872Z,1509058245.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:46.233Z,1509058246.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:46.275Z,1509058246.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:46.633Z,1509058246.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:46.649Z,1509058246.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:47.044Z,1509058247.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:47.085Z,1509058247.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:47.439Z,1509058247.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:47.479Z,1509058247.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:47.835Z,1509058247.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:47.852Z,1509058247.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:48.228Z,1509058248.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:48.251Z,1509058248.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:48.641Z,1509058248.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:48.658Z,1509058248.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:49.037Z,1509058249.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:49.053Z,1509058249.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:49.427Z,1509058249.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:49.461Z,1509058249.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:49.830Z,1509058249.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:49.860Z,1509058249.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:50.235Z,1509058250.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:50.262Z,1509058250.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:50.634Z,1509058250.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:50.666Z,1509058250.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:51.037Z,1509058251.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:51.069Z,1509058251.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:51.431Z,1509058251.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:51.447Z,1509058251.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:51.839Z,1509058251.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:51.868Z,1509058251.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:52.243Z,1509058252.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:52.259Z,1509058252.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:52.647Z,1509058252.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:52.684Z,1509058252.684 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:53.025Z,1509058253.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:53.056Z,1509058253.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:53.437Z,1509058253.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:53.470Z,1509058253.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:53.845Z,1509058253.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:53.862Z,1509058253.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:54.239Z,1509058254.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:54.264Z,1509058254.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:54.638Z,1509058254.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:54.670Z,1509058254.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:55.044Z,1509058255.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:55.075Z,1509058255.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:55.438Z,1509058255.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:55.454Z,1509058255.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:55.842Z,1509058255.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:55.859Z,1509058255.859 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:56.224Z,1509058256.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:56.285Z,1509058256.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:56.633Z,1509058256.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:56.694Z,1509058256.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:57.030Z,1509058257.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:57.065Z,1509058257.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:57.436Z,1509058257.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:57.487Z,1509058257.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:57.834Z,1509058257.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:57.850Z,1509058257.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:58.240Z,1509058258.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:58.298Z,1509058258.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:58.640Z,1509058258.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:58.689Z,1509058258.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:59.039Z,1509058259.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:59.055Z,1509058259.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:59.435Z,1509058259.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:59.475Z,1509058259.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:50:59.837Z,1509058259.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:50:59.870Z,1509058259.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:00.229Z,1509058260.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:00.268Z,1509058260.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:00.627Z,1509058260.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:00.667Z,1509058260.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:01.040Z,1509058261.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:01.071Z,1509058261.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:01.441Z,1509058261.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:01.470Z,1509058261.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:01.838Z,1509058261.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:01.854Z,1509058261.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:02.231Z,1509058262.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:02.255Z,1509058262.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:02.632Z,1509058262.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:02.648Z,1509058262.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:03.048Z,1509058263.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:03.064Z,1509058263.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:03.447Z,1509058263.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:03.463Z,1509058263.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:03.822Z,1509058263.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:03.861Z,1509058263.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:04.233Z,1509058264.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:04.262Z,1509058264.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:04.637Z,1509058264.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:04.678Z,1509058264.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:05.031Z,1509058265.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:05.065Z,1509058265.065 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:05.427Z,1509058265.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:05.495Z,1509058265.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:05.845Z,1509058265.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:05.880Z,1509058265.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:06.231Z,1509058266.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:06.272Z,1509058266.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:06.634Z,1509058266.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:06.674Z,1509058266.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:07.041Z,1509058267.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:07.068Z,1509058267.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:07.430Z,1509058267.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:07.451Z,1509058267.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:07.451Z,1509058267.451 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 61
2017-10-26T22:51:07.451Z,1509058267.451 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:51:07.480Z,1509058267.480 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:07.480Z,1509058267.480 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 61
2017-10-26T22:51:07.480Z,1509058267.480 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:51:07.949Z,1509058267.949 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:51:07.950Z,1509058267.950 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:51:07.998Z,1509058267.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:08.128Z,1509058268.128 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:51:08.128Z,1509058268.128 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 61
2017-10-26T22:51:08.129Z,1509058268.129 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:51:08.129Z,1509058268.129 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 61
2017-10-26T22:51:08.391Z,1509058268.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:08.408Z,1509058268.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:51:08.409Z,1509058268.409 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:51:08.410Z,1509058268.410 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:51:08.430Z,1509058268.430 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:51:08.431Z,1509058268.431 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:51:08.432Z,1509058268.432 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:51:08.803Z,1509058268.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:08.825Z,1509058268.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:09.189Z,1509058269.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:09.233Z,1509058269.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:09.602Z,1509058269.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:09.638Z,1509058269.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:09.994Z,1509058269.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:10.031Z,1509058270.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:10.398Z,1509058270.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:10.455Z,1509058270.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:10.796Z,1509058270.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:10.867Z,1509058270.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:11.200Z,1509058271.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:11.223Z,1509058271.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:11.584Z,1509058271.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:11.641Z,1509058271.641 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:11.989Z,1509058271.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:12.029Z,1509058272.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:12.389Z,1509058272.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:12.457Z,1509058272.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:12.788Z,1509058272.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:12.852Z,1509058272.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:13.197Z,1509058273.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:13.213Z,1509058273.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:13.599Z,1509058273.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:13.620Z,1509058273.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:14.000Z,1509058274.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:14.029Z,1509058274.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:14.384Z,1509058274.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:14.421Z,1509058274.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:14.787Z,1509058274.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:14.826Z,1509058274.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:15.210Z,1509058275.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:15.245Z,1509058275.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:15.599Z,1509058275.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:15.616Z,1509058275.616 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:16.002Z,1509058276.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:16.023Z,1509058276.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:16.397Z,1509058276.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:16.425Z,1509058276.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:16.803Z,1509058276.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:16.819Z,1509058276.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:17.197Z,1509058277.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:17.214Z,1509058277.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:17.602Z,1509058277.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:17.619Z,1509058277.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:18.004Z,1509058278.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:18.042Z,1509058278.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:18.398Z,1509058278.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:18.415Z,1509058278.415 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:18.797Z,1509058278.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:18.818Z,1509058278.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:19.184Z,1509058279.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:19.218Z,1509058279.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:19.590Z,1509058279.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:19.619Z,1509058279.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:19.985Z,1509058279.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:20.034Z,1509058280.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:20.390Z,1509058280.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:20.427Z,1509058280.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:20.790Z,1509058280.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:20.839Z,1509058280.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:21.198Z,1509058281.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:21.214Z,1509058281.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:21.601Z,1509058281.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:21.618Z,1509058281.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:21.998Z,1509058281.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:22.071Z,1509058282.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:22.389Z,1509058282.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:22.425Z,1509058282.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:22.786Z,1509058282.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:22.803Z,1509058282.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:23.195Z,1509058283.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:23.223Z,1509058283.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:23.591Z,1509058283.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:23.611Z,1509058283.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:24.000Z,1509058284.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:24.017Z,1509058284.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:24.390Z,1509058284.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:24.427Z,1509058284.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:24.793Z,1509058284.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:24.906Z,1509058284.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:25.191Z,1509058285.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:25.230Z,1509058285.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:25.593Z,1509058285.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:25.645Z,1509058285.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:25.987Z,1509058285.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:26.015Z,1509058286.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:26.386Z,1509058286.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:26.444Z,1509058286.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:26.798Z,1509058286.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:26.852Z,1509058286.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:27.185Z,1509058287.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:27.239Z,1509058287.239 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:27.589Z,1509058287.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:27.634Z,1509058287.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:27.993Z,1509058287.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:28.035Z,1509058288.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:28.401Z,1509058288.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:28.417Z,1509058288.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:28.799Z,1509058288.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:28.820Z,1509058288.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:29.163Z,1509058289.163 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:51:29.191Z,1509058289.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:29.229Z,1509058289.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:29.598Z,1509058289.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:29.624Z,1509058289.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:29.989Z,1509058289.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:30.026Z,1509058290.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:30.391Z,1509058290.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:30.424Z,1509058290.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:30.790Z,1509058290.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:30.805Z,1509058290.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:31.210Z,1509058291.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:31.248Z,1509058291.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:31.594Z,1509058291.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:31.611Z,1509058291.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:31.994Z,1509058291.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:32.010Z,1509058292.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:32.403Z,1509058292.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:32.419Z,1509058292.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:32.806Z,1509058292.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:32.822Z,1509058292.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:33.197Z,1509058293.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:33.253Z,1509058293.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:33.598Z,1509058293.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:33.619Z,1509058293.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:33.993Z,1509058293.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:34.016Z,1509058294.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:34.388Z,1509058294.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:34.425Z,1509058294.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:34.791Z,1509058294.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:34.825Z,1509058294.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:35.198Z,1509058295.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:35.232Z,1509058295.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:35.595Z,1509058295.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:35.624Z,1509058295.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:36.000Z,1509058296.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:36.016Z,1509058296.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:36.388Z,1509058296.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:36.424Z,1509058296.424 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:36.801Z,1509058296.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:36.818Z,1509058296.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:37.210Z,1509058297.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:37.226Z,1509058297.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:37.589Z,1509058297.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:37.624Z,1509058297.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:37.987Z,1509058297.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:38.026Z,1509058298.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:38.391Z,1509058298.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:38.435Z,1509058298.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:38.790Z,1509058298.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:38.852Z,1509058298.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:39.196Z,1509058299.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:39.248Z,1509058299.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:39.598Z,1509058299.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:39.618Z,1509058299.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:40.011Z,1509058300.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:40.069Z,1509058300.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:40.617Z,1509058300.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:40.645Z,1509058300.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:41.034Z,1509058301.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:41.092Z,1509058301.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:41.427Z,1509058301.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:41.497Z,1509058301.497 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:41.821Z,1509058301.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:41.853Z,1509058301.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:42.220Z,1509058302.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:42.268Z,1509058302.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:42.618Z,1509058302.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:42.638Z,1509058302.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:43.027Z,1509058303.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:43.048Z,1509058303.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:43.423Z,1509058303.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:43.473Z,1509058303.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:43.819Z,1509058303.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:43.849Z,1509058303.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:44.218Z,1509058304.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:44.247Z,1509058304.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:44.619Z,1509058304.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:44.648Z,1509058304.648 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:45.021Z,1509058305.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:45.037Z,1509058305.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:45.422Z,1509058305.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:45.445Z,1509058305.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:45.970Z,1509058305.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:45.990Z,1509058305.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:46.368Z,1509058306.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:46.384Z,1509058306.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:46.779Z,1509058306.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:46.804Z,1509058306.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:47.163Z,1509058307.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:47.179Z,1509058307.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:47.567Z,1509058307.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:47.596Z,1509058307.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:47.969Z,1509058307.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:47.990Z,1509058307.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:48.363Z,1509058308.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:48.380Z,1509058308.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:48.757Z,1509058308.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:48.777Z,1509058308.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:49.178Z,1509058309.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:49.195Z,1509058309.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:49.559Z,1509058309.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:49.600Z,1509058309.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:49.964Z,1509058309.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:49.995Z,1509058309.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:50.365Z,1509058310.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:50.401Z,1509058310.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:50.761Z,1509058310.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:50.786Z,1509058310.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:51.166Z,1509058311.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:51.187Z,1509058311.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:51.574Z,1509058311.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:51.610Z,1509058311.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:51.974Z,1509058311.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:51.990Z,1509058311.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:52.359Z,1509058312.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:52.406Z,1509058312.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:52.764Z,1509058312.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:52.795Z,1509058312.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:53.167Z,1509058313.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:53.226Z,1509058313.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:53.560Z,1509058313.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:53.633Z,1509058313.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:53.963Z,1509058313.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:53.993Z,1509058313.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:54.363Z,1509058314.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:54.393Z,1509058314.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:54.789Z,1509058314.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:54.854Z,1509058314.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:55.184Z,1509058315.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:55.229Z,1509058315.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:55.710Z,1509058315.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:55.790Z,1509058315.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:56.107Z,1509058316.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:56.190Z,1509058316.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:56.504Z,1509058316.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:56.542Z,1509058316.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:56.968Z,1509058316.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:57.011Z,1509058317.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:57.324Z,1509058317.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:57.343Z,1509058317.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:57.724Z,1509058317.724 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:57.748Z,1509058317.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:58.124Z,1509058318.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:58.167Z,1509058318.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:58.513Z,1509058318.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:58.543Z,1509058318.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:58.958Z,1509058318.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:59.026Z,1509058319.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:59.312Z,1509058319.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:59.331Z,1509058319.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:51:59.718Z,1509058319.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:51:59.757Z,1509058319.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:00.118Z,1509058320.118 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:00.164Z,1509058320.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:00.518Z,1509058320.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:00.535Z,1509058320.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:00.961Z,1509058320.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:01.021Z,1509058321.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:01.306Z,1509058321.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:01.338Z,1509058321.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:01.711Z,1509058321.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:01.749Z,1509058321.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:02.113Z,1509058322.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:02.160Z,1509058322.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:02.515Z,1509058322.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:02.561Z,1509058322.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:02.969Z,1509058322.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:03.023Z,1509058323.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:03.313Z,1509058323.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:03.336Z,1509058323.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:03.716Z,1509058323.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:03.745Z,1509058323.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:04.102Z,1509058324.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:04.151Z,1509058324.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:04.511Z,1509058324.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:04.550Z,1509058324.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:04.959Z,1509058324.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:05.003Z,1509058325.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:05.327Z,1509058325.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:05.343Z,1509058325.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:05.708Z,1509058325.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:05.746Z,1509058325.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:06.112Z,1509058326.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:06.168Z,1509058326.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:06.510Z,1509058326.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:06.529Z,1509058326.529 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T22:52:06.529Z,1509058326.529 [BPC1] Data Fault, FailCount= 1
2017-10-26T22:52:06.529Z,1509058326.529 [BPC1](ERROR): Data Fault
2017-10-26T22:52:06.538Z,1509058326.538 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:06.609Z,1509058326.609 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T22:52:06.962Z,1509058326.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:06.985Z,1509058326.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:07.323Z,1509058327.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:07.343Z,1509058327.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:07.722Z,1509058327.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:07.739Z,1509058327.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:07.831Z,1509058327.831 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:52:07.831Z,1509058327.831 [BPC1] No Fault, FailCount= 1
2017-10-26T22:52:08.128Z,1509058328.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:08.245Z,1509058328.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:08.515Z,1509058328.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:08.534Z,1509058328.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:08.961Z,1509058328.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:09.032Z,1509058329.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:09.320Z,1509058329.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:09.367Z,1509058329.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:09.708Z,1509058329.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:09.724Z,1509058329.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:10.108Z,1509058330.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:10.165Z,1509058330.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:10.517Z,1509058330.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:10.539Z,1509058330.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:10.968Z,1509058330.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:11.034Z,1509058331.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:11.309Z,1509058331.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:11.362Z,1509058331.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:11.718Z,1509058331.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:11.735Z,1509058331.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:12.124Z,1509058332.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:12.169Z,1509058332.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:12.511Z,1509058332.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:12.528Z,1509058332.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:12.958Z,1509058332.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:13.012Z,1509058333.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:13.311Z,1509058333.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:13.330Z,1509058333.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:13.714Z,1509058333.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:13.748Z,1509058333.747 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:14.132Z,1509058334.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:14.163Z,1509058334.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:14.692Z,1509058334.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:14.733Z,1509058334.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:15.109Z,1509058335.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:15.125Z,1509058335.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:15.512Z,1509058335.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:15.532Z,1509058335.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:15.909Z,1509058335.909 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:15.925Z,1509058335.925 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:16.297Z,1509058336.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:16.318Z,1509058336.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:16.698Z,1509058336.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:16.715Z,1509058336.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:17.109Z,1509058337.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:17.160Z,1509058337.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:17.512Z,1509058337.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:17.529Z,1509058337.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:17.903Z,1509058337.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:17.924Z,1509058337.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:18.297Z,1509058338.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:18.348Z,1509058338.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:18.699Z,1509058338.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:18.733Z,1509058338.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:19.097Z,1509058339.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:19.166Z,1509058339.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:19.502Z,1509058339.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:19.547Z,1509058339.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:19.897Z,1509058339.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:19.916Z,1509058339.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:20.300Z,1509058340.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:20.317Z,1509058340.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:20.705Z,1509058340.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:20.722Z,1509058340.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:21.117Z,1509058341.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:21.217Z,1509058341.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:21.510Z,1509058341.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:21.532Z,1509058341.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:21.907Z,1509058341.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:21.962Z,1509058341.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:22.312Z,1509058342.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:22.328Z,1509058342.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:22.711Z,1509058342.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:22.767Z,1509058342.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:23.104Z,1509058343.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:23.165Z,1509058343.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:23.500Z,1509058343.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:23.563Z,1509058343.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:23.904Z,1509058343.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:23.932Z,1509058343.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:24.302Z,1509058344.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:24.329Z,1509058344.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:24.708Z,1509058344.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:24.724Z,1509058344.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:25.137Z,1509058345.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:25.180Z,1509058345.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:25.511Z,1509058345.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:25.528Z,1509058345.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:25.907Z,1509058345.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:25.928Z,1509058345.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:26.319Z,1509058346.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:26.335Z,1509058346.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:26.701Z,1509058346.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:26.728Z,1509058346.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:27.106Z,1509058347.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:27.179Z,1509058347.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:27.505Z,1509058347.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:27.534Z,1509058347.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:27.923Z,1509058347.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:27.949Z,1509058347.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:28.300Z,1509058348.300 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:28.320Z,1509058348.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:28.706Z,1509058348.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:28.722Z,1509058348.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:29.115Z,1509058349.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:29.159Z,1509058349.159 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:29.476Z,1509058349.476 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:52:29.516Z,1509058349.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:29.533Z,1509058349.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:29.898Z,1509058349.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:29.935Z,1509058349.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:30.306Z,1509058350.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:30.327Z,1509058350.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:30.707Z,1509058350.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:30.748Z,1509058350.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:31.106Z,1509058351.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:31.151Z,1509058351.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:31.508Z,1509058351.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:31.530Z,1509058351.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:31.908Z,1509058351.908 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:31.937Z,1509058351.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:32.318Z,1509058352.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:32.336Z,1509058352.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:32.710Z,1509058352.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:32.726Z,1509058352.726 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:33.107Z,1509058353.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:33.152Z,1509058353.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:33.500Z,1509058353.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:33.520Z,1509058353.520 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:33.906Z,1509058353.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:33.923Z,1509058353.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:34.312Z,1509058354.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:34.333Z,1509058354.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:34.708Z,1509058354.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:34.724Z,1509058354.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:35.100Z,1509058355.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:35.191Z,1509058355.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:35.494Z,1509058355.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:35.541Z,1509058355.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:35.903Z,1509058355.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:35.920Z,1509058355.920 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:36.305Z,1509058356.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:36.365Z,1509058356.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:36.708Z,1509058356.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:36.729Z,1509058356.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:37.121Z,1509058357.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:37.182Z,1509058357.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:37.509Z,1509058357.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:37.567Z,1509058357.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:37.902Z,1509058357.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:37.931Z,1509058357.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:38.317Z,1509058358.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:38.334Z,1509058358.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:38.704Z,1509058358.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:38.732Z,1509058358.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:39.106Z,1509058359.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:39.155Z,1509058359.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:39.512Z,1509058359.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:39.550Z,1509058359.550 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:39.902Z,1509058359.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:39.958Z,1509058359.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:40.303Z,1509058360.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:40.320Z,1509058360.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:40.701Z,1509058360.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:40.717Z,1509058360.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:41.105Z,1509058361.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:41.166Z,1509058361.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:41.506Z,1509058361.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:41.535Z,1509058361.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:41.900Z,1509058361.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:41.933Z,1509058361.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:42.299Z,1509058362.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:42.341Z,1509058362.341 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:42.701Z,1509058362.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:42.733Z,1509058362.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:43.106Z,1509058363.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:43.162Z,1509058363.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:43.511Z,1509058363.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:43.555Z,1509058363.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:43.903Z,1509058363.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:43.919Z,1509058363.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:44.310Z,1509058364.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:44.326Z,1509058364.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:44.729Z,1509058364.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:44.757Z,1509058364.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:45.121Z,1509058365.121 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:45.160Z,1509058365.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:45.552Z,1509058365.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:45.595Z,1509058365.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:45.897Z,1509058365.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:45.913Z,1509058365.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:46.307Z,1509058366.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:46.343Z,1509058366.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:46.707Z,1509058366.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:46.739Z,1509058366.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:47.110Z,1509058367.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:47.155Z,1509058367.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:47.510Z,1509058367.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:47.526Z,1509058367.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:47.920Z,1509058367.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:47.937Z,1509058367.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:48.301Z,1509058368.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:48.335Z,1509058368.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:48.702Z,1509058368.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:48.731Z,1509058368.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:49.101Z,1509058369.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:49.149Z,1509058369.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:49.506Z,1509058369.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:49.539Z,1509058369.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:49.918Z,1509058369.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:49.974Z,1509058369.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:50.297Z,1509058370.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:50.325Z,1509058370.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:50.695Z,1509058370.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:50.732Z,1509058370.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:51.122Z,1509058371.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:51.158Z,1509058371.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:51.508Z,1509058371.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:51.534Z,1509058371.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:51.904Z,1509058371.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:51.935Z,1509058371.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:52.305Z,1509058372.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:52.321Z,1509058372.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:52.700Z,1509058372.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:52.716Z,1509058372.716 [BPC1](ERROR): Failed to receive battery data
2017-10-26T22:52:52.716Z,1509058372.716 [BPC1] Communications Fault, FailCount= 1
2017-10-26T22:52:52.716Z,1509058372.716 [BPC1](ERROR): Communications Fault
2017-10-26T22:52:52.746Z,1509058372.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:52.844Z,1509058372.844 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T22:52:53.110Z,1509058373.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:53.156Z,1509058373.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:53.515Z,1509058373.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:53.532Z,1509058373.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:53.903Z,1509058373.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:53.933Z,1509058373.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:54.030Z,1509058374.030 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:52:54.030Z,1509058374.030 [BPC1] No Fault, FailCount= 1
2017-10-26T22:52:54.303Z,1509058374.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:54.377Z,1509058374.377 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:54.708Z,1509058374.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:54.745Z,1509058374.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:55.128Z,1509058375.128 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:55.152Z,1509058375.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:55.505Z,1509058375.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:55.556Z,1509058375.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:55.904Z,1509058375.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:55.921Z,1509058375.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:56.308Z,1509058376.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:56.324Z,1509058376.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:56.713Z,1509058376.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:56.734Z,1509058376.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:57.115Z,1509058377.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:57.131Z,1509058377.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:57.503Z,1509058377.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:57.542Z,1509058377.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:57.904Z,1509058377.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:57.936Z,1509058377.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:58.302Z,1509058378.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:58.358Z,1509058378.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:58.699Z,1509058378.699 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:58.716Z,1509058378.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:59.106Z,1509058379.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:59.164Z,1509058379.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:59.508Z,1509058379.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:59.524Z,1509058379.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:52:59.903Z,1509058379.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:52:59.919Z,1509058379.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:00.305Z,1509058380.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:00.321Z,1509058380.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:00.711Z,1509058380.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:00.728Z,1509058380.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:01.105Z,1509058381.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:01.155Z,1509058381.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:01.501Z,1509058381.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:01.537Z,1509058381.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:01.899Z,1509058381.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:01.933Z,1509058381.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:02.302Z,1509058382.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:02.338Z,1509058382.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:02.700Z,1509058382.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:02.716Z,1509058382.716 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:03.103Z,1509058383.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:03.151Z,1509058383.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:03.515Z,1509058383.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:03.531Z,1509058383.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:03.907Z,1509058383.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:03.952Z,1509058383.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:04.299Z,1509058384.299 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:04.340Z,1509058384.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:04.704Z,1509058384.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:04.736Z,1509058384.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:05.241Z,1509058385.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:05.258Z,1509058385.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:05.657Z,1509058385.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:05.724Z,1509058385.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:06.029Z,1509058386.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:06.053Z,1509058386.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:06.425Z,1509058386.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:06.457Z,1509058386.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:06.843Z,1509058386.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:06.864Z,1509058386.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:07.242Z,1509058387.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:07.275Z,1509058387.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:07.646Z,1509058387.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:07.678Z,1509058387.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:08.034Z,1509058388.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:08.066Z,1509058388.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:08.434Z,1509058388.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:08.477Z,1509058388.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:08.832Z,1509058388.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:08.923Z,1509058388.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:09.238Z,1509058389.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:09.306Z,1509058389.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:09.638Z,1509058389.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:09.654Z,1509058389.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:10.043Z,1509058390.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:10.074Z,1509058390.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:10.444Z,1509058390.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:10.461Z,1509058390.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:10.833Z,1509058390.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:10.901Z,1509058390.901 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:11.231Z,1509058391.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:11.273Z,1509058391.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:11.638Z,1509058391.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:11.691Z,1509058391.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:12.043Z,1509058392.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:12.092Z,1509058392.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:12.447Z,1509058392.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:12.492Z,1509058392.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:12.845Z,1509058392.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:12.862Z,1509058392.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:13.241Z,1509058393.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:13.272Z,1509058393.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:13.640Z,1509058393.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:13.679Z,1509058393.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:14.035Z,1509058394.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:14.072Z,1509058394.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:14.434Z,1509058394.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:14.451Z,1509058394.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:14.839Z,1509058394.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:14.855Z,1509058394.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:15.242Z,1509058395.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:15.275Z,1509058395.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:15.633Z,1509058395.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:15.661Z,1509058395.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:16.038Z,1509058396.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:16.077Z,1509058396.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:16.436Z,1509058396.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:16.468Z,1509058396.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:16.847Z,1509058396.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:16.961Z,1509058396.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:17.227Z,1509058397.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:17.260Z,1509058397.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:17.641Z,1509058397.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:17.657Z,1509058397.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:18.041Z,1509058398.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:18.059Z,1509058398.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:18.449Z,1509058398.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:18.465Z,1509058398.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:18.834Z,1509058398.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:18.862Z,1509058398.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:19.239Z,1509058399.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:19.280Z,1509058399.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:19.631Z,1509058399.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:19.668Z,1509058399.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:20.035Z,1509058400.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:20.076Z,1509058400.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:20.437Z,1509058400.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:20.469Z,1509058400.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:20.839Z,1509058400.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:20.855Z,1509058400.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:21.229Z,1509058401.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:21.262Z,1509058401.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:21.630Z,1509058401.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:21.658Z,1509058401.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:22.035Z,1509058402.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:22.068Z,1509058402.068 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:22.439Z,1509058402.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:22.480Z,1509058402.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:22.838Z,1509058402.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:22.854Z,1509058402.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:23.248Z,1509058403.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:23.282Z,1509058403.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:23.777Z,1509058403.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:23.813Z,1509058403.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:24.177Z,1509058404.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:24.259Z,1509058404.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:24.573Z,1509058404.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:24.608Z,1509058404.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:25.016Z,1509058405.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:25.090Z,1509058405.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:25.371Z,1509058405.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:25.419Z,1509058405.419 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:25.771Z,1509058405.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:25.832Z,1509058405.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:26.181Z,1509058406.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:26.259Z,1509058406.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:26.582Z,1509058406.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:26.613Z,1509058406.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:26.978Z,1509058406.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:27.004Z,1509058407.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:27.374Z,1509058407.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:27.417Z,1509058407.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:27.782Z,1509058407.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:27.817Z,1509058407.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:28.189Z,1509058408.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:28.215Z,1509058408.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:28.573Z,1509058408.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:28.623Z,1509058408.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:28.974Z,1509058408.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:29.021Z,1509058409.021 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:29.396Z,1509058409.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:29.439Z,1509058409.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:29.746Z,1509058409.746 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:53:29.787Z,1509058409.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:29.823Z,1509058409.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:30.187Z,1509058410.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:30.235Z,1509058410.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:30.587Z,1509058410.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:30.626Z,1509058410.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:31.004Z,1509058411.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:31.037Z,1509058411.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:31.384Z,1509058411.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:31.414Z,1509058411.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:31.775Z,1509058411.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:31.823Z,1509058411.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:32.183Z,1509058412.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:32.230Z,1509058412.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:32.581Z,1509058412.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:32.618Z,1509058412.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:33.025Z,1509058413.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:33.063Z,1509058413.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:33.377Z,1509058413.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:33.455Z,1509058413.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:33.789Z,1509058413.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:33.842Z,1509058413.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:34.171Z,1509058414.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:34.214Z,1509058414.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:34.574Z,1509058414.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:34.611Z,1509058414.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:35.030Z,1509058415.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:35.071Z,1509058415.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:35.371Z,1509058415.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:35.436Z,1509058415.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:35.780Z,1509058415.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:35.817Z,1509058415.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:36.189Z,1509058416.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:36.217Z,1509058416.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:36.583Z,1509058416.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:36.650Z,1509058416.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:36.980Z,1509058416.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:37.029Z,1509058417.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:37.382Z,1509058417.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:37.446Z,1509058417.446 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T22:53:37.446Z,1509058417.446 [BPC1] Data Fault, FailCount= 1
2017-10-26T22:53:37.446Z,1509058417.446 [BPC1](ERROR): Data Fault
2017-10-26T22:53:37.483Z,1509058417.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:37.562Z,1509058417.562 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T22:53:37.785Z,1509058417.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:37.812Z,1509058417.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:38.178Z,1509058418.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:38.235Z,1509058418.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:38.580Z,1509058418.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:38.631Z,1509058418.631 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:38.716Z,1509058418.716 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:53:38.716Z,1509058418.716 [BPC1] No Fault, FailCount= 1
2017-10-26T22:53:38.981Z,1509058418.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:39.128Z,1509058419.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:39.386Z,1509058419.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:39.431Z,1509058419.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:39.774Z,1509058419.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:39.822Z,1509058419.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:40.209Z,1509058420.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:40.260Z,1509058420.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:40.576Z,1509058420.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:40.611Z,1509058420.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:40.983Z,1509058420.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:41.035Z,1509058421.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:41.365Z,1509058421.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:41.403Z,1509058421.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:41.788Z,1509058421.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:41.814Z,1509058421.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:42.324Z,1509058422.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:42.367Z,1509058422.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:42.731Z,1509058422.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:42.760Z,1509058422.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:43.164Z,1509058423.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:43.188Z,1509058423.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:43.538Z,1509058423.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:43.573Z,1509058423.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:43.932Z,1509058423.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:43.948Z,1509058423.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:44.334Z,1509058424.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:44.376Z,1509058424.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:44.738Z,1509058424.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:44.754Z,1509058424.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:45.182Z,1509058425.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:45.199Z,1509058425.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:45.535Z,1509058425.535 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:45.555Z,1509058425.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:45.939Z,1509058425.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:45.956Z,1509058425.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:46.343Z,1509058426.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:46.365Z,1509058426.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:46.746Z,1509058426.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:46.763Z,1509058426.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:47.148Z,1509058427.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:47.167Z,1509058427.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:47.548Z,1509058427.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:47.565Z,1509058427.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:47.935Z,1509058427.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:47.968Z,1509058427.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:48.327Z,1509058428.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:48.368Z,1509058428.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:48.736Z,1509058428.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:48.764Z,1509058428.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:49.165Z,1509058429.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:49.182Z,1509058429.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:49.538Z,1509058429.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:49.571Z,1509058429.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:49.941Z,1509058429.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:49.958Z,1509058429.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:50.344Z,1509058430.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:50.364Z,1509058430.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:50.751Z,1509058430.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:50.812Z,1509058430.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:51.158Z,1509058431.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:51.174Z,1509058431.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:51.541Z,1509058431.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:51.569Z,1509058431.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:51.943Z,1509058431.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:52.006Z,1509058432.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:52.327Z,1509058432.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:52.344Z,1509058432.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:52.743Z,1509058432.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:52.816Z,1509058432.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:53.160Z,1509058433.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:53.193Z,1509058433.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:53.539Z,1509058433.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:53.600Z,1509058433.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:53.943Z,1509058433.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:53.994Z,1509058433.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:54.336Z,1509058434.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:54.362Z,1509058434.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:54.729Z,1509058434.729 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:54.760Z,1509058434.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:55.160Z,1509058435.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:55.180Z,1509058435.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:55.553Z,1509058435.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:55.570Z,1509058435.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:55.939Z,1509058435.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:55.965Z,1509058435.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:56.333Z,1509058436.333 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:56.358Z,1509058436.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:56.740Z,1509058436.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:56.755Z,1509058436.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:57.148Z,1509058437.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:57.172Z,1509058437.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:57.548Z,1509058437.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:57.583Z,1509058437.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:57.930Z,1509058437.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:57.967Z,1509058437.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:58.331Z,1509058438.331 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:58.347Z,1509058438.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:58.737Z,1509058438.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:58.770Z,1509058438.770 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:59.154Z,1509058439.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:59.178Z,1509058439.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:59.548Z,1509058439.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:59.566Z,1509058439.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:53:59.945Z,1509058439.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:53:59.961Z,1509058439.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:00.326Z,1509058440.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:00.359Z,1509058440.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:00.731Z,1509058440.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:00.764Z,1509058440.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:01.173Z,1509058441.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:01.206Z,1509058441.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:01.539Z,1509058441.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:01.564Z,1509058441.564 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:01.940Z,1509058441.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:01.970Z,1509058441.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:02.341Z,1509058442.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:02.357Z,1509058442.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:02.736Z,1509058442.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:02.758Z,1509058442.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:03.174Z,1509058443.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:03.205Z,1509058443.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:03.545Z,1509058443.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:03.561Z,1509058443.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:03.939Z,1509058443.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:03.963Z,1509058443.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:04.348Z,1509058444.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:04.380Z,1509058444.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:04.740Z,1509058444.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:04.809Z,1509058444.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:05.134Z,1509058445.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:05.171Z,1509058445.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:05.531Z,1509058445.531 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:05.555Z,1509058445.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:05.935Z,1509058445.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:05.956Z,1509058445.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:06.344Z,1509058446.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:06.400Z,1509058446.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:06.746Z,1509058446.746 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:06.767Z,1509058446.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:07.164Z,1509058447.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:07.219Z,1509058447.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:07.537Z,1509058447.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:07.566Z,1509058447.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:07.928Z,1509058447.928 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:07.982Z,1509058447.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:08.334Z,1509058448.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:08.355Z,1509058448.355 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:08.739Z,1509058448.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:08.799Z,1509058448.799 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:08.800Z,1509058448.800 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 62
2017-10-26T22:54:08.800Z,1509058448.800 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:54:08.807Z,1509058448.807 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:08.808Z,1509058448.808 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 62
2017-10-26T22:54:08.808Z,1509058448.808 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:54:08.899Z,1509058448.899 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:54:08.899Z,1509058448.899 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:54:09.161Z,1509058449.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:09.322Z,1509058449.322 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:54:09.322Z,1509058449.322 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 62
2017-10-26T22:54:09.323Z,1509058449.323 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:54:09.323Z,1509058449.323 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 62
2017-10-26T22:54:09.541Z,1509058449.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:09.566Z,1509058449.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:54:09.567Z,1509058449.567 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:54:09.567Z,1509058449.567 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:54:09.570Z,1509058449.570 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:54:09.570Z,1509058449.570 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:54:09.571Z,1509058449.571 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:54:10.096Z,1509058450.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:10.155Z,1509058450.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:10.494Z,1509058450.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:10.510Z,1509058450.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:10.904Z,1509058450.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:10.979Z,1509058450.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:11.292Z,1509058451.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:11.309Z,1509058451.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:11.700Z,1509058451.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:11.717Z,1509058451.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:12.092Z,1509058452.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:12.153Z,1509058452.153 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:12.493Z,1509058452.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:12.510Z,1509058452.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:12.895Z,1509058452.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:12.982Z,1509058452.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:13.278Z,1509058453.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:13.323Z,1509058453.323 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:13.683Z,1509058453.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:13.720Z,1509058453.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:14.089Z,1509058454.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:14.157Z,1509058454.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:14.498Z,1509058454.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:14.531Z,1509058454.531 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:14.887Z,1509058454.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:14.972Z,1509058454.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:15.281Z,1509058455.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:15.298Z,1509058455.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:15.692Z,1509058455.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:15.729Z,1509058455.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:16.090Z,1509058456.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:16.129Z,1509058456.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:16.498Z,1509058456.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:16.514Z,1509058456.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:16.903Z,1509058456.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:16.967Z,1509058456.967 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:17.288Z,1509058457.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:17.333Z,1509058457.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:17.689Z,1509058457.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:17.734Z,1509058457.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:18.088Z,1509058458.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:18.104Z,1509058458.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:18.489Z,1509058458.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:18.505Z,1509058458.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:18.934Z,1509058458.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:19.003Z,1509058459.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:19.291Z,1509058459.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:19.308Z,1509058459.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:19.691Z,1509058459.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:19.761Z,1509058459.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:20.105Z,1509058460.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:20.176Z,1509058460.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:20.489Z,1509058460.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:20.562Z,1509058460.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:20.934Z,1509058460.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:20.976Z,1509058460.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:21.296Z,1509058461.296 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:21.319Z,1509058461.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:21.688Z,1509058461.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:21.768Z,1509058461.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:22.095Z,1509058462.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:22.120Z,1509058462.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:22.480Z,1509058462.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:22.545Z,1509058462.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:22.644Z,1509058462.644 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T22:54:22.968Z,1509058462.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:23.030Z,1509058463.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:23.309Z,1509058463.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:23.349Z,1509058463.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:23.692Z,1509058463.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:23.708Z,1509058463.708 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:24.090Z,1509058464.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:24.108Z,1509058464.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:24.499Z,1509058464.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:24.515Z,1509058464.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:24.898Z,1509058464.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:24.915Z,1509058464.915 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:25.292Z,1509058465.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:25.332Z,1509058465.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:25.690Z,1509058465.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:25.735Z,1509058465.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:26.083Z,1509058466.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:26.112Z,1509058466.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:26.498Z,1509058466.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:26.514Z,1509058466.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:26.884Z,1509058466.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:26.975Z,1509058466.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:27.283Z,1509058467.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:27.309Z,1509058467.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:27.696Z,1509058467.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:27.712Z,1509058467.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:28.096Z,1509058468.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:28.147Z,1509058468.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:28.486Z,1509058468.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:28.516Z,1509058468.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:28.889Z,1509058468.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:28.970Z,1509058468.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:29.285Z,1509058469.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:29.301Z,1509058469.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:29.658Z,1509058469.658 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:54:29.695Z,1509058469.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:29.711Z,1509058469.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:30.092Z,1509058470.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:30.110Z,1509058470.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:30.495Z,1509058470.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:30.517Z,1509058470.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:30.925Z,1509058470.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:30.985Z,1509058470.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:31.280Z,1509058471.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:31.321Z,1509058471.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:31.691Z,1509058471.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:31.715Z,1509058471.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:32.081Z,1509058472.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:32.098Z,1509058472.098 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:32.499Z,1509058472.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:32.540Z,1509058472.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:32.929Z,1509058472.929 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:33.001Z,1509058473.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:33.283Z,1509058473.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:33.315Z,1509058473.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:33.693Z,1509058473.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:33.717Z,1509058473.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:34.086Z,1509058474.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:34.143Z,1509058474.143 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T22:54:34.143Z,1509058474.143 [BPC1] Data Fault, FailCount= 1
2017-10-26T22:54:34.143Z,1509058474.143 [BPC1](ERROR): Data Fault
2017-10-26T22:54:34.173Z,1509058474.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:34.233Z,1509058474.233 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T22:54:34.496Z,1509058474.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:34.532Z,1509058474.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:34.952Z,1509058474.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:34.998Z,1509058474.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:35.280Z,1509058475.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:35.315Z,1509058475.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:35.356Z,1509058475.356 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:54:35.356Z,1509058475.356 [BPC1] No Fault, FailCount= 1
2017-10-26T22:54:35.689Z,1509058475.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:35.778Z,1509058475.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:36.090Z,1509058476.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:36.151Z,1509058476.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:36.489Z,1509058476.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:36.549Z,1509058476.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:36.903Z,1509058476.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:36.972Z,1509058476.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:37.284Z,1509058477.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:37.312Z,1509058477.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:37.698Z,1509058477.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:37.715Z,1509058477.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:38.097Z,1509058478.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:38.146Z,1509058478.146 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:38.489Z,1509058478.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:38.524Z,1509058478.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:38.889Z,1509058478.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:38.905Z,1509058478.905 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:39.294Z,1509058479.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:39.322Z,1509058479.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:39.694Z,1509058479.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:39.717Z,1509058479.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:40.088Z,1509058480.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:40.152Z,1509058480.152 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:40.478Z,1509058480.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:40.495Z,1509058480.495 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:40.894Z,1509058480.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:40.988Z,1509058480.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:41.291Z,1509058481.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:41.306Z,1509058481.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:41.684Z,1509058481.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:41.706Z,1509058481.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:42.090Z,1509058482.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:42.106Z,1509058482.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:42.492Z,1509058482.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:42.508Z,1509058482.508 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:42.940Z,1509058482.940 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:42.983Z,1509058482.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:43.290Z,1509058483.290 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:43.307Z,1509058483.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:43.694Z,1509058483.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:43.712Z,1509058483.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:44.094Z,1509058484.094 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:44.111Z,1509058484.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:44.496Z,1509058484.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:44.512Z,1509058484.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:44.939Z,1509058484.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:44.995Z,1509058484.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:45.288Z,1509058485.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:45.324Z,1509058485.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:45.688Z,1509058485.688 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:45.738Z,1509058485.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:46.089Z,1509058486.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:46.145Z,1509058486.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:46.500Z,1509058486.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:46.516Z,1509058486.516 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:47.077Z,1509058487.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:47.120Z,1509058487.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:47.472Z,1509058487.472 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:47.532Z,1509058487.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:47.852Z,1509058487.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:47.889Z,1509058487.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:48.261Z,1509058488.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:48.304Z,1509058488.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:48.655Z,1509058488.655 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:48.724Z,1509058488.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:49.057Z,1509058489.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:49.073Z,1509058489.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:49.469Z,1509058489.469 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:49.502Z,1509058489.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:49.867Z,1509058489.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:49.921Z,1509058489.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:50.270Z,1509058490.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:50.286Z,1509058490.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:50.666Z,1509058490.666 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:50.721Z,1509058490.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:51.077Z,1509058491.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:51.143Z,1509058491.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:51.450Z,1509058491.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:51.488Z,1509058491.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:51.876Z,1509058491.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:51.931Z,1509058491.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:52.256Z,1509058492.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:52.285Z,1509058492.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:52.652Z,1509058492.652 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:52.688Z,1509058492.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:53.056Z,1509058493.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:53.091Z,1509058493.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:53.468Z,1509058493.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:53.493Z,1509058493.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:53.869Z,1509058493.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:53.913Z,1509058493.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:54.255Z,1509058494.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:54.279Z,1509058494.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:54.657Z,1509058494.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:54.681Z,1509058494.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:55.076Z,1509058495.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:55.100Z,1509058495.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:55.497Z,1509058495.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:55.537Z,1509058495.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:55.864Z,1509058495.864 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:55.931Z,1509058495.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:56.270Z,1509058496.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:56.302Z,1509058496.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:56.799Z,1509058496.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:56.814Z,1509058496.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:57.205Z,1509058497.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:57.221Z,1509058497.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:57.591Z,1509058497.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:57.619Z,1509058497.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:58.010Z,1509058498.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:58.026Z,1509058498.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:58.386Z,1509058498.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:58.411Z,1509058498.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:58.804Z,1509058498.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:58.830Z,1509058498.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:59.199Z,1509058499.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:59.225Z,1509058499.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:54:59.603Z,1509058499.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:54:59.619Z,1509058499.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:00.008Z,1509058500.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:00.028Z,1509058500.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:00.392Z,1509058500.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:00.425Z,1509058500.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:00.800Z,1509058500.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:00.828Z,1509058500.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:01.192Z,1509058501.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:01.213Z,1509058501.213 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:01.593Z,1509058501.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:01.614Z,1509058501.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:02.002Z,1509058502.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:02.050Z,1509058502.050 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:02.394Z,1509058502.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:02.423Z,1509058502.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:02.787Z,1509058502.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:02.811Z,1509058502.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:03.188Z,1509058503.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:03.225Z,1509058503.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:03.593Z,1509058503.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:03.613Z,1509058503.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:04.002Z,1509058504.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:04.057Z,1509058504.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:04.400Z,1509058504.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:04.416Z,1509058504.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:04.816Z,1509058504.816 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:04.867Z,1509058504.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:05.209Z,1509058505.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:05.236Z,1509058505.236 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:05.600Z,1509058505.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:05.651Z,1509058505.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:06.000Z,1509058506.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:06.062Z,1509058506.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:06.399Z,1509058506.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:06.423Z,1509058506.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:07.022Z,1509058507.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:07.091Z,1509058507.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:07.411Z,1509058507.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:07.451Z,1509058507.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:07.802Z,1509058507.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:07.845Z,1509058507.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:08.214Z,1509058508.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:08.221Z,1509058508.221 [PNI_TCM](ERROR): CRC does not match. Expected:0x298 got:0x16292
2017-10-26T22:55:08.264Z,1509058508.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:08.614Z,1509058508.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:08.650Z,1509058508.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:09.024Z,1509058509.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:09.088Z,1509058509.088 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:09.388Z,1509058509.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:09.428Z,1509058509.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:09.795Z,1509058509.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:09.837Z,1509058509.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:10.198Z,1509058510.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:10.235Z,1509058510.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:10.605Z,1509058510.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:10.627Z,1509058510.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:11.018Z,1509058511.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:11.042Z,1509058511.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:11.404Z,1509058511.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:11.442Z,1509058511.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:11.797Z,1509058511.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:11.840Z,1509058511.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:12.214Z,1509058512.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:12.269Z,1509058512.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:12.603Z,1509058512.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:12.658Z,1509058512.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:13.023Z,1509058513.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:13.048Z,1509058513.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:13.410Z,1509058513.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:13.447Z,1509058513.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:13.805Z,1509058513.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:13.846Z,1509058513.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:14.201Z,1509058514.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:14.255Z,1509058514.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:14.604Z,1509058514.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:14.638Z,1509058514.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:15.038Z,1509058515.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:15.071Z,1509058515.071 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:15.395Z,1509058515.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:15.447Z,1509058515.447 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:15.800Z,1509058515.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:15.877Z,1509058515.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:16.206Z,1509058516.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:16.247Z,1509058516.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:16.597Z,1509058516.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:16.649Z,1509058516.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:17.000Z,1509058517.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:17.016Z,1509058517.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:17.390Z,1509058517.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:17.454Z,1509058517.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:17.805Z,1509058517.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:17.839Z,1509058517.839 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:18.224Z,1509058518.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:18.310Z,1509058518.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:18.613Z,1509058518.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:18.634Z,1509058518.634 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:18.994Z,1509058518.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:19.032Z,1509058519.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:19.389Z,1509058519.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:19.442Z,1509058519.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:19.795Z,1509058519.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:19.826Z,1509058519.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:20.211Z,1509058520.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:20.273Z,1509058520.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:20.603Z,1509058520.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:20.668Z,1509058520.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:21.021Z,1509058521.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:21.051Z,1509058521.051 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:21.416Z,1509058521.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:21.435Z,1509058521.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:21.795Z,1509058521.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:21.826Z,1509058521.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:22.220Z,1509058522.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:22.248Z,1509058522.248 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:22.606Z,1509058522.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:22.633Z,1509058522.633 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:23.030Z,1509058523.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:23.055Z,1509058523.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:23.401Z,1509058523.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:23.429Z,1509058523.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:23.803Z,1509058523.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:23.830Z,1509058523.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:24.196Z,1509058524.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:24.233Z,1509058524.233 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:24.598Z,1509058524.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:24.638Z,1509058524.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:25.018Z,1509058525.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:25.060Z,1509058525.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:25.409Z,1509058525.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:25.437Z,1509058525.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:25.817Z,1509058525.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:25.837Z,1509058525.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:26.199Z,1509058526.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:26.234Z,1509058526.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:26.719Z,1509058526.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:26.749Z,1509058526.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:27.125Z,1509058527.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:27.192Z,1509058527.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:27.519Z,1509058527.519 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:27.551Z,1509058527.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:27.918Z,1509058527.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:27.954Z,1509058527.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:28.312Z,1509058528.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:28.332Z,1509058528.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:28.719Z,1509058528.719 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:28.739Z,1509058528.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:29.104Z,1509058529.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:29.165Z,1509058529.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:29.514Z,1509058529.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:29.544Z,1509058529.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:29.896Z,1509058529.896 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:55:29.917Z,1509058529.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:29.953Z,1509058529.953 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:30.310Z,1509058530.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:30.326Z,1509058530.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:30.713Z,1509058530.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:30.730Z,1509058530.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:31.130Z,1509058531.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:31.169Z,1509058531.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:31.524Z,1509058531.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:31.555Z,1509058531.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:31.915Z,1509058531.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:31.931Z,1509058531.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:32.330Z,1509058532.330 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:32.390Z,1509058532.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:32.707Z,1509058532.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:32.743Z,1509058532.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:33.119Z,1509058533.119 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:33.165Z,1509058533.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:33.526Z,1509058533.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:33.571Z,1509058533.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:33.922Z,1509058533.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:33.948Z,1509058533.948 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:34.318Z,1509058534.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:34.373Z,1509058534.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:34.718Z,1509058534.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:34.777Z,1509058534.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:35.110Z,1509058535.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:35.167Z,1509058535.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:35.521Z,1509058535.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:35.554Z,1509058535.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:35.906Z,1509058535.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:35.952Z,1509058535.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:36.306Z,1509058536.306 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:36.322Z,1509058536.322 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:36.715Z,1509058536.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:36.731Z,1509058536.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:37.116Z,1509058537.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:37.163Z,1509058537.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:37.520Z,1509058537.520 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:37.536Z,1509058537.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:37.927Z,1509058537.927 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:37.959Z,1509058537.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:38.319Z,1509058538.319 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:38.335Z,1509058538.335 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:38.718Z,1509058538.718 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:38.733Z,1509058538.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:39.124Z,1509058539.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:39.162Z,1509058539.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:39.514Z,1509058539.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:39.530Z,1509058539.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:39.917Z,1509058539.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:39.934Z,1509058539.934 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:40.315Z,1509058540.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:40.347Z,1509058540.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:40.722Z,1509058540.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:40.746Z,1509058540.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:41.106Z,1509058541.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:41.156Z,1509058541.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:41.528Z,1509058541.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:41.544Z,1509058541.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:41.904Z,1509058541.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:41.943Z,1509058541.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:42.315Z,1509058542.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:42.339Z,1509058542.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:42.721Z,1509058542.721 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:42.762Z,1509058542.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:43.120Z,1509058543.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:43.155Z,1509058543.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:43.522Z,1509058543.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:43.561Z,1509058543.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:43.919Z,1509058543.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:43.939Z,1509058543.939 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:44.324Z,1509058544.324 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:44.340Z,1509058544.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:44.708Z,1509058544.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:44.760Z,1509058544.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:45.139Z,1509058545.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:45.172Z,1509058545.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:45.517Z,1509058545.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:45.533Z,1509058545.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:45.915Z,1509058545.915 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:45.947Z,1509058545.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:46.315Z,1509058546.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:46.332Z,1509058546.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:46.717Z,1509058546.717 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:46.733Z,1509058546.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:47.142Z,1509058547.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:47.221Z,1509058547.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:47.506Z,1509058547.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:47.535Z,1509058547.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:47.905Z,1509058547.905 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:47.946Z,1509058547.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:48.314Z,1509058548.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:48.346Z,1509058548.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:48.708Z,1509058548.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:48.763Z,1509058548.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:49.122Z,1509058549.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:49.188Z,1509058549.188 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:49.514Z,1509058549.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:49.530Z,1509058549.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:49.925Z,1509058549.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:49.961Z,1509058549.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:50.332Z,1509058550.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:50.349Z,1509058550.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:50.705Z,1509058550.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:50.734Z,1509058550.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:51.106Z,1509058551.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:51.171Z,1509058551.171 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:51.526Z,1509058551.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:51.547Z,1509058551.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:51.910Z,1509058551.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:51.940Z,1509058551.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:52.312Z,1509058552.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:52.333Z,1509058552.333 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:52.714Z,1509058552.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:52.731Z,1509058552.731 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:53.126Z,1509058553.126 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:53.162Z,1509058553.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:53.516Z,1509058553.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:53.532Z,1509058553.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:53.926Z,1509058553.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:53.947Z,1509058553.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:54.314Z,1509058554.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:54.337Z,1509058554.337 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:54.722Z,1509058554.722 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:54.738Z,1509058554.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:55.105Z,1509058555.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:55.158Z,1509058555.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:55.509Z,1509058555.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:55.546Z,1509058555.546 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:55.913Z,1509058555.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:55.961Z,1509058555.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:56.318Z,1509058556.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:56.334Z,1509058556.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:56.712Z,1509058556.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:56.729Z,1509058556.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:57.110Z,1509058557.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:57.170Z,1509058557.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:57.517Z,1509058557.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:57.534Z,1509058557.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:57.918Z,1509058557.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:57.935Z,1509058557.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:58.305Z,1509058558.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:58.334Z,1509058558.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:58.714Z,1509058558.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:58.743Z,1509058558.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:59.106Z,1509058559.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:59.167Z,1509058559.167 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:59.516Z,1509058559.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:59.532Z,1509058559.532 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:55:59.920Z,1509058559.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:55:59.936Z,1509058559.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:00.314Z,1509058560.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:00.330Z,1509058560.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:00.716Z,1509058560.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:00.732Z,1509058560.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:01.127Z,1509058561.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:01.191Z,1509058561.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:01.518Z,1509058561.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:01.592Z,1509058561.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:01.913Z,1509058561.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:01.929Z,1509058561.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:02.314Z,1509058562.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:02.331Z,1509058562.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:02.725Z,1509058562.725 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:02.773Z,1509058562.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:03.138Z,1509058563.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:03.165Z,1509058563.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:03.514Z,1509058563.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:03.570Z,1509058563.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:03.932Z,1509058563.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:03.982Z,1509058563.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:04.311Z,1509058564.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:04.351Z,1509058564.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:04.708Z,1509058564.708 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:04.744Z,1509058564.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:05.139Z,1509058565.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:05.160Z,1509058565.160 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:05.512Z,1509058565.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:05.541Z,1509058565.541 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:05.916Z,1509058565.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:05.960Z,1509058565.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:06.316Z,1509058566.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:06.340Z,1509058566.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:06.716Z,1509058566.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:06.732Z,1509058566.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:07.127Z,1509058567.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:07.168Z,1509058567.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:07.505Z,1509058567.505 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:07.534Z,1509058567.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:07.916Z,1509058567.916 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:07.932Z,1509058567.932 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:08.309Z,1509058568.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:08.357Z,1509058568.357 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:08.705Z,1509058568.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:08.740Z,1509058568.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:09.134Z,1509058569.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:09.187Z,1509058569.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:09.510Z,1509058569.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:09.555Z,1509058569.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:09.910Z,1509058569.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:09.938Z,1509058569.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:10.314Z,1509058570.314 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:10.343Z,1509058570.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:10.715Z,1509058570.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:10.733Z,1509058570.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:11.124Z,1509058571.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:11.170Z,1509058571.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:11.509Z,1509058571.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:11.547Z,1509058571.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:11.919Z,1509058571.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:11.936Z,1509058571.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:12.311Z,1509058572.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:12.342Z,1509058572.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:12.712Z,1509058572.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:12.740Z,1509058572.740 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:13.132Z,1509058573.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:13.155Z,1509058573.155 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:13.521Z,1509058573.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:13.545Z,1509058573.545 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:13.911Z,1509058573.911 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:13.940Z,1509058573.940 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:14.313Z,1509058574.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:14.330Z,1509058574.330 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:14.716Z,1509058574.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:14.732Z,1509058574.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:15.147Z,1509058575.147 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:15.179Z,1509058575.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:15.518Z,1509058575.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:15.535Z,1509058575.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:16.040Z,1509058576.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:16.164Z,1509058576.164 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:16.434Z,1509058576.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:16.459Z,1509058576.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:16.835Z,1509058576.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:16.886Z,1509058576.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:17.240Z,1509058577.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:17.266Z,1509058577.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:17.631Z,1509058577.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:17.683Z,1509058577.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:18.030Z,1509058578.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:18.046Z,1509058578.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:18.432Z,1509058578.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:18.488Z,1509058578.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:18.835Z,1509058578.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:18.851Z,1509058578.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:19.240Z,1509058579.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:19.264Z,1509058579.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:19.644Z,1509058579.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:19.671Z,1509058579.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:20.032Z,1509058580.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:20.060Z,1509058580.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:20.432Z,1509058580.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:20.461Z,1509058580.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:20.835Z,1509058580.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:20.851Z,1509058580.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:21.233Z,1509058581.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:21.249Z,1509058581.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:21.631Z,1509058581.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:21.660Z,1509058581.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:22.038Z,1509058582.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:22.073Z,1509058582.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:22.435Z,1509058582.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:22.465Z,1509058582.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:22.839Z,1509058582.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:22.866Z,1509058582.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:23.248Z,1509058583.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:23.268Z,1509058583.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:23.637Z,1509058583.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:23.653Z,1509058583.653 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:24.038Z,1509058584.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:24.054Z,1509058584.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:24.430Z,1509058584.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:24.476Z,1509058584.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:24.829Z,1509058584.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:24.865Z,1509058584.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:25.251Z,1509058585.251 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:25.272Z,1509058585.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:25.641Z,1509058585.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:25.667Z,1509058585.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:26.041Z,1509058586.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:26.057Z,1509058586.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:26.434Z,1509058586.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:26.473Z,1509058586.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:26.832Z,1509058586.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:26.933Z,1509058586.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:27.235Z,1509058587.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:27.268Z,1509058587.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:27.631Z,1509058587.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:27.660Z,1509058587.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:28.034Z,1509058588.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:28.063Z,1509058588.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:28.435Z,1509058588.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:28.451Z,1509058588.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:28.843Z,1509058588.843 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:28.893Z,1509058588.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:29.237Z,1509058589.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:29.262Z,1509058589.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:29.634Z,1509058589.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:29.643Z,1509058589.643 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T22:56:29.644Z,1509058589.644 [BPC1] Data Fault, FailCount= 1
2017-10-26T22:56:29.644Z,1509058589.644 [BPC1](ERROR): Data Fault
2017-10-26T22:56:29.661Z,1509058589.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:29.774Z,1509058589.774 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T22:56:30.005Z,1509058590.005 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:56:30.040Z,1509058590.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:30.063Z,1509058590.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:30.427Z,1509058590.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:30.461Z,1509058590.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:30.839Z,1509058590.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:30.863Z,1509058590.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:31.022Z,1509058591.022 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T22:56:31.022Z,1509058591.022 [BPC1] No Fault, FailCount= 1
2017-10-26T22:56:31.245Z,1509058591.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:31.342Z,1509058591.342 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:31.639Z,1509058591.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:31.671Z,1509058591.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:32.049Z,1509058592.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:32.102Z,1509058592.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:32.439Z,1509058592.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:32.459Z,1509058592.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:32.839Z,1509058592.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:32.856Z,1509058592.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:33.231Z,1509058593.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:33.260Z,1509058593.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:33.633Z,1509058593.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:33.676Z,1509058593.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:34.037Z,1509058594.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:34.075Z,1509058594.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:34.434Z,1509058594.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:34.451Z,1509058594.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:34.833Z,1509058594.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:34.850Z,1509058594.850 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:35.235Z,1509058595.235 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:35.259Z,1509058595.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:35.647Z,1509058595.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:35.668Z,1509058595.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:36.038Z,1509058596.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:36.054Z,1509058596.054 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:36.445Z,1509058596.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:36.461Z,1509058596.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:36.825Z,1509058596.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:36.878Z,1509058596.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:37.234Z,1509058597.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:37.251Z,1509058597.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:37.753Z,1509058597.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:37.791Z,1509058597.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:38.170Z,1509058598.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:38.202Z,1509058598.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:38.555Z,1509058598.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:38.588Z,1509058598.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:38.959Z,1509058598.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:38.992Z,1509058598.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:39.344Z,1509058599.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:39.386Z,1509058599.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:39.750Z,1509058599.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:39.798Z,1509058599.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:40.164Z,1509058600.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:40.199Z,1509058600.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:40.551Z,1509058600.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:40.599Z,1509058600.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:40.994Z,1509058600.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:41.064Z,1509058601.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:41.357Z,1509058601.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:41.386Z,1509058601.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:41.756Z,1509058601.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:41.793Z,1509058601.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:42.178Z,1509058602.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:42.203Z,1509058602.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:42.542Z,1509058602.542 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:42.575Z,1509058602.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:43.003Z,1509058603.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:43.046Z,1509058603.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:43.355Z,1509058603.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:43.400Z,1509058603.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:43.738Z,1509058603.738 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:43.818Z,1509058603.818 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:44.166Z,1509058604.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:44.199Z,1509058604.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:44.549Z,1509058604.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:44.566Z,1509058604.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:44.999Z,1509058604.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:45.078Z,1509058605.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:45.342Z,1509058605.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:45.390Z,1509058605.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:45.748Z,1509058605.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:45.796Z,1509058605.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:45.811Z,1509058605.811 [ballast_and_trim](INFO): Timed out from 2017-10-26T19:56:45.5Z
2017-10-26T22:56:45.811Z,1509058605.811 [MissionManager](INFO): ballast_and_trim is completed.
2017-10-26T22:56:45.811Z,1509058605.811 [MissionManager](INFO): Uninitializing Mission ballast_and_trim
2017-10-26T22:56:45.812Z,1509058605.812 [ballast_and_trim] Stopped
2017-10-26T22:56:45.812Z,1509058605.812 [ballast_and_trim](DEBUG): Aggregate::uninitialize ballast_and_trim
2017-10-26T22:56:45.812Z,1509058605.812 [ballast_and_trim:Science] Stopped
2017-10-26T22:56:45.812Z,1509058605.812 [ballast_and_trim:Science](DEBUG): Aggregate::uninitialize ballast_and_trim:Science
2017-10-26T22:56:45.812Z,1509058605.812 [ballast_and_trim:Science:A] Stopped
2017-10-26T22:56:45.812Z,1509058605.812 [ballast_and_trim:Science:C] Stopped
2017-10-26T22:56:45.812Z,1509058605.812 [ballast_and_trim:Science:F] Stopped
2017-10-26T22:56:45.812Z,1509058605.812 [ballast_and_trim:RunBallastAndTrim] Stopped
2017-10-26T22:56:45.813Z,1509058605.813 [ballast_and_trim:RunBallastAndTrim](DEBUG): Aggregate::uninitialize ballast_and_trim:RunBallastAndTrim
2017-10-26T22:56:45.813Z,1509058605.813 [ballast_and_trim:RunBallastAndTrim:Depth2] Stopped
2017-10-26T22:56:45.813Z,1509058605.813 [ballast_and_trim:RunBallastAndTrim:Depth2](DEBUG): Aggregate::uninitialize ballast_and_trim:RunBallastAndTrim:Depth2
2017-10-26T22:56:45.813Z,1509058605.813 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim] Stopped
2017-10-26T22:56:45.813Z,1509058605.813 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim](DEBUG): Aggregate::uninitialize ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim
2017-10-26T22:56:45.813Z,1509058605.813 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:A] Stopped
2017-10-26T22:56:45.813Z,1509058605.813 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:B] Stopped
2017-10-26T22:56:45.814Z,1509058605.814 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:C] Stopped
2017-10-26T22:56:45.814Z,1509058605.814 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:D] Stopped
2017-10-26T22:56:45.814Z,1509058605.814 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:E.SetSpeed] Stopped
2017-10-26T22:56:45.814Z,1509058605.814 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:E.SetSpeed](DEBUG): Uninitialize.
2017-10-26T22:56:45.814Z,1509058605.814 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:F.Pitch] Stopped
2017-10-26T22:56:45.814Z,1509058605.814 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:H.] Stopped
2017-10-26T22:56:45.814Z,1509058605.814 [ballast_and_trim:RunBallastAndTrim:Depth2:BallastAndTrim:H.](INFO): Uninitializing BallastAndTrim.
2017-10-26T22:56:45.965Z,1509058605.965 [WetLabsBB2FL](INFO): Powering down
2017-10-26T22:56:46.159Z,1509058606.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:46.215Z,1509058606.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:46.221Z,1509058606.221 [MissionManager](IMPORTANT): Started mission Default
2017-10-26T22:56:46.221Z,1509058606.221 [Default] Running Loop=1
2017-10-26T22:56:46.221Z,1509058606.221 [Default](DEBUG): Aggregate::initialize Default
2017-10-26T22:56:46.221Z,1509058606.221 [Default:B.GoToSurface] Running Loop=1
2017-10-26T22:56:46.221Z,1509058606.221 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2017-10-26T22:56:46.222Z,1509058606.222 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2017-10-26T22:56:46.222Z,1509058606.222 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2017-10-26T22:56:46.222Z,1509058606.222 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 1.000000 m/s.
2017-10-26T22:56:46.223Z,1509058606.223 [Default:B.GoToSurface](DEBUG): No pitch timeout specified. Using default value of 20.000000 seconds.
2017-10-26T22:56:46.223Z,1509058606.223 [Default:B.GoToSurface](DEBUG): No surface timeout specified. Using default value of 1000.000000 seconds.
2017-10-26T22:56:46.223Z,1509058606.223 [Default:A.Wait] Running Loop=1
2017-10-26T22:56:46.223Z,1509058606.223 [Default:A.Wait](DEBUG): Initialize Wait Component.
2017-10-26T22:56:46.225Z,1509058606.225 [Default:B.GoToSurface](ERROR): Altitude too low: -5.97
2017-10-26T22:56:46.438Z,1509058606.438 [Radio_Surface](INFO): Powering up
2017-10-26T22:56:46.509Z,1509058606.509 [Aanderaa_O2](INFO): Powering down
2017-10-26T22:56:46.536Z,1509058606.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:46.610Z,1509058606.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:46.625Z,1509058606.625 [Default:B.GoToSurface](ERROR): Altitude too low: -5.96
2017-10-26T22:56:46.788Z,1509058606.788 [CTD_Seabird](INFO): Stopping potential previous instance(s) of CTD_Seabird LCM interface
2017-10-26T22:56:46.790Z,1509058606.790 [CTD_Seabird](INFO): Powering down
2017-10-26T22:56:46.994Z,1509058606.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:47.049Z,1509058607.049 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:47.055Z,1509058607.055 [Default:B.GoToSurface](ERROR): Altitude too low: -5.96
2017-10-26T22:56:47.342Z,1509058607.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:47.358Z,1509058607.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:47.364Z,1509058607.364 [Default:B.GoToSurface](ERROR): Altitude too low: -5.95
2017-10-26T22:56:47.855Z,1509058607.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:47.872Z,1509058607.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:47.895Z,1509058607.895 [Default:B.GoToSurface](ERROR): Altitude too low: -5.93
2017-10-26T22:56:48.245Z,1509058608.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:48.275Z,1509058608.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:48.290Z,1509058608.290 [Default:B.GoToSurface](ERROR): Altitude too low: -5.91
2017-10-26T22:56:48.645Z,1509058608.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:48.691Z,1509058608.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:48.697Z,1509058608.697 [Default:B.GoToSurface](ERROR): Altitude too low: -5.91
2017-10-26T22:56:49.046Z,1509058609.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:49.078Z,1509058609.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:49.451Z,1509058609.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:49.481Z,1509058609.481 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:49.870Z,1509058609.870 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:49.949Z,1509058609.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:50.260Z,1509058610.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:50.284Z,1509058610.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:50.663Z,1509058610.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:50.691Z,1509058610.691 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:51.047Z,1509058611.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:51.072Z,1509058611.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:51.451Z,1509058611.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:51.471Z,1509058611.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:51.853Z,1509058611.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:51.881Z,1509058611.881 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:52.063Z,1509058612.063 [Radio_Surface](INFO): Powering down
2017-10-26T22:56:52.255Z,1509058612.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:52.271Z,1509058612.271 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:52.665Z,1509058612.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:52.697Z,1509058612.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:53.062Z,1509058613.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:53.078Z,1509058613.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:53.478Z,1509058613.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:53.535Z,1509058613.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:53.848Z,1509058613.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:53.876Z,1509058613.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:54.264Z,1509058614.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:54.280Z,1509058614.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:54.657Z,1509058614.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:54.685Z,1509058614.685 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:55.090Z,1509058615.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:55.134Z,1509058615.134 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:55.454Z,1509058615.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:55.489Z,1509058615.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:55.845Z,1509058615.845 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:55.861Z,1509058615.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:56.253Z,1509058616.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:56.269Z,1509058616.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:56.651Z,1509058616.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:56.709Z,1509058616.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:57.057Z,1509058617.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:57.073Z,1509058617.073 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:57.455Z,1509058617.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:57.471Z,1509058617.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:57.855Z,1509058617.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:57.870Z,1509058617.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:58.254Z,1509058618.254 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:58.288Z,1509058618.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:58.638Z,1509058618.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:58.662Z,1509058618.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:59.046Z,1509058619.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:59.086Z,1509058619.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:59.097Z,1509058619.097 [Default:B.GoToSurface](ERROR): Altitude too low: -5.71
2017-10-26T22:56:59.303Z,1509058619.303 [Radio_Surface](INFO): Powering up
2017-10-26T22:56:59.598Z,1509058619.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:56:59.645Z,1509058619.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:56:59.651Z,1509058619.651 [Default:B.GoToSurface](ERROR): Altitude too low: -5.75
2017-10-26T22:56:59.652Z,1509058619.652 [Default:A.Wait](INFO): Done Waiting.
2017-10-26T22:56:59.652Z,1509058619.652 [Default:A.Wait] Stopped
2017-10-26T22:56:59.652Z,1509058619.652 [Default:A.Wait](DEBUG): Uninitialize Wait Component.
2017-10-26T22:56:59.991Z,1509058619.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:00.007Z,1509058620.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:00.029Z,1509058620.029 [Default:B.GoToSurface](ERROR): Altitude too low: -5.71
2017-10-26T22:57:00.398Z,1509058620.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:00.448Z,1509058620.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:00.455Z,1509058620.455 [Default:B.GoToSurface](ERROR): Altitude too low: -5.72
2017-10-26T22:57:00.803Z,1509058620.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:00.845Z,1509058620.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:00.851Z,1509058620.851 [Default:B.GoToSurface](ERROR): Altitude too low: -5.69
2017-10-26T22:57:01.190Z,1509058621.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:01.222Z,1509058621.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:01.598Z,1509058621.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:01.614Z,1509058621.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:01.989Z,1509058621.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:02.016Z,1509058622.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:02.410Z,1509058622.410 [ThrusterServo](ERROR): Thruster uart error: serial timeout
2017-10-26T22:57:02.410Z,1509058622.410 [ThrusterServo] Communications Fault, FailCount= 1
2017-10-26T22:57:02.410Z,1509058622.410 [ThrusterServo](ERROR): Communications Fault
2017-10-26T22:57:02.414Z,1509058622.414 [CBIT](ERROR): Communications Fault in component: ThrusterServo
2017-10-26T22:57:02.477Z,1509058622.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:02.501Z,1509058622.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:02.587Z,1509058622.587 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2017-10-26T22:57:02.587Z,1509058622.587 [ThrusterServo](INFO): Powering down
2017-10-26T22:57:02.862Z,1509058622.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:02.956Z,1509058622.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:03.265Z,1509058623.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:03.281Z,1509058623.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:03.346Z,1509058623.346 [ThrusterServo](DEBUG): Initializing EZServoServo.
2017-10-26T22:57:03.465Z,1509058623.465 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2017-10-26T22:57:03.469Z,1509058623.469 [CBIT](INFO): Clearing failed state for component ThrusterServo
2017-10-26T22:57:03.469Z,1509058623.469 [ThrusterServo] No Fault, FailCount= 1
2017-10-26T22:57:03.664Z,1509058623.664 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:03.679Z,1509058623.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:04.047Z,1509058624.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:04.084Z,1509058624.084 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:04.445Z,1509058624.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:04.476Z,1509058624.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:04.842Z,1509058624.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:04.858Z,1509058624.858 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:04.947Z,1509058624.947 [Radio_Surface](INFO): Powering down
2017-10-26T22:57:05.258Z,1509058625.258 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:05.279Z,1509058625.279 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:05.653Z,1509058625.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:05.668Z,1509058625.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:06.050Z,1509058626.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:06.066Z,1509058626.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:06.446Z,1509058626.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:06.467Z,1509058626.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:06.474Z,1509058626.474 [Default:B.GoToSurface](ERROR): Pitch down timeout. Pitch: -6.62
2017-10-26T22:57:06.872Z,1509058626.872 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:06.964Z,1509058626.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:07.291Z,1509058627.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:07.311Z,1509058627.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:07.697Z,1509058627.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:07.734Z,1509058627.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:08.099Z,1509058628.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:08.170Z,1509058628.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:08.781Z,1509058628.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:08.797Z,1509058628.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:09.179Z,1509058629.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:09.200Z,1509058629.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:09.580Z,1509058629.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:09.600Z,1509058629.600 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:09.600Z,1509058629.600 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 63
2017-10-26T22:57:09.600Z,1509058629.600 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T22:57:09.605Z,1509058629.605 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:09.605Z,1509058629.605 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 63
2017-10-26T22:57:09.605Z,1509058629.605 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T22:57:09.727Z,1509058629.727 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T22:57:09.727Z,1509058629.727 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T22:57:09.981Z,1509058629.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:10.075Z,1509058630.075 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T22:57:10.075Z,1509058630.075 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 63
2017-10-26T22:57:10.076Z,1509058630.076 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T22:57:10.076Z,1509058630.076 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 63
2017-10-26T22:57:10.380Z,1509058630.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:10.399Z,1509058630.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T22:57:10.399Z,1509058630.399 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:57:10.400Z,1509058630.400 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:57:10.402Z,1509058630.402 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T22:57:10.403Z,1509058630.403 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T22:57:10.403Z,1509058630.403 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T22:57:10.769Z,1509058630.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:10.804Z,1509058630.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:10.988Z,1509058630.988 [Radio_Surface](INFO): Powering up
2017-10-26T22:57:11.170Z,1509058631.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:11.207Z,1509058631.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:11.572Z,1509058631.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:11.628Z,1509058631.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:11.979Z,1509058631.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:12.010Z,1509058632.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:12.376Z,1509058632.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:12.408Z,1509058632.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:12.776Z,1509058632.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:12.817Z,1509058632.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:13.185Z,1509058633.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:13.249Z,1509058633.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:13.574Z,1509058633.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:13.591Z,1509058633.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:13.972Z,1509058633.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:13.987Z,1509058633.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:14.372Z,1509058634.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:14.455Z,1509058634.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:14.779Z,1509058634.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:14.795Z,1509058634.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:15.179Z,1509058635.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:15.231Z,1509058635.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:15.569Z,1509058635.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:15.619Z,1509058635.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:15.973Z,1509058635.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:16.001Z,1509058636.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:16.390Z,1509058636.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:16.405Z,1509058636.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:16.771Z,1509058636.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:16.810Z,1509058636.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:17.171Z,1509058637.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:17.209Z,1509058637.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:17.572Z,1509058637.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:17.610Z,1509058637.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:17.980Z,1509058637.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:18.007Z,1509058638.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:18.374Z,1509058638.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:18.406Z,1509058638.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:18.777Z,1509058638.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:18.801Z,1509058638.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:19.284Z,1509058639.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:19.328Z,1509058639.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:19.691Z,1509058639.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:19.719Z,1509058639.719 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:20.088Z,1509058640.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:20.109Z,1509058640.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:20.486Z,1509058640.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:20.501Z,1509058640.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:20.901Z,1509058640.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:20.993Z,1509058640.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:21.288Z,1509058641.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:21.316Z,1509058641.316 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:21.686Z,1509058641.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:21.723Z,1509058641.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:22.091Z,1509058642.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:22.118Z,1509058642.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:22.492Z,1509058642.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:22.524Z,1509058642.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:22.892Z,1509058642.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:22.984Z,1509058642.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:23.298Z,1509058643.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:23.314Z,1509058643.314 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:23.702Z,1509058643.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:23.742Z,1509058643.742 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:24.097Z,1509058644.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:24.113Z,1509058644.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:24.502Z,1509058644.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:24.523Z,1509058644.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:24.887Z,1509058644.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:24.921Z,1509058644.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:25.288Z,1509058645.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:25.309Z,1509058645.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:25.697Z,1509058645.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:25.733Z,1509058645.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:26.099Z,1509058646.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:26.163Z,1509058646.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:26.491Z,1509058646.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:26.506Z,1509058646.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:26.900Z,1509058646.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:26.917Z,1509058646.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:27.305Z,1509058647.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:27.358Z,1509058647.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:27.698Z,1509058647.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:27.766Z,1509058647.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:28.106Z,1509058648.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:28.122Z,1509058648.122 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:28.500Z,1509058648.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:28.557Z,1509058648.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:29.058Z,1509058649.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:29.074Z,1509058649.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:29.457Z,1509058649.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:29.512Z,1509058649.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:29.855Z,1509058649.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:29.912Z,1509058649.912 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:30.220Z,1509058650.220 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:57:30.253Z,1509058650.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:30.269Z,1509058650.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:30.651Z,1509058650.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:30.673Z,1509058650.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:31.050Z,1509058651.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:31.066Z,1509058651.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:31.452Z,1509058651.452 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:31.468Z,1509058651.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:31.850Z,1509058651.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:31.873Z,1509058651.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:32.265Z,1509058652.265 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:32.281Z,1509058652.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:32.645Z,1509058652.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:32.680Z,1509058652.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:33.042Z,1509058653.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:33.075Z,1509058653.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:33.451Z,1509058653.451 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:33.479Z,1509058653.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:33.850Z,1509058653.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:33.865Z,1509058653.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:34.250Z,1509058654.250 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:34.266Z,1509058654.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:34.650Z,1509058654.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:34.665Z,1509058654.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:35.062Z,1509058655.062 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:35.094Z,1509058655.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:35.453Z,1509058655.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:35.470Z,1509058655.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:35.844Z,1509058655.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:35.928Z,1509058655.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:36.243Z,1509058656.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:36.259Z,1509058656.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:36.649Z,1509058656.649 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:36.665Z,1509058656.665 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:37.063Z,1509058657.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:37.094Z,1509058657.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:37.455Z,1509058657.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:37.472Z,1509058657.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:37.856Z,1509058657.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:37.873Z,1509058657.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:38.288Z,1509058658.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:38.324Z,1509058658.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:38.667Z,1509058658.667 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:38.686Z,1509058658.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:39.080Z,1509058659.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:39.117Z,1509058659.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:39.468Z,1509058659.468 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:39.484Z,1509058659.484 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:39.848Z,1509058659.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:39.877Z,1509058659.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:40.371Z,1509058660.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:40.387Z,1509058660.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:40.771Z,1509058660.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:40.833Z,1509058660.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:41.171Z,1509058661.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:41.194Z,1509058661.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:41.573Z,1509058661.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:41.589Z,1509058661.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:41.967Z,1509058661.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:41.983Z,1509058661.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:42.368Z,1509058662.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:42.416Z,1509058662.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:42.771Z,1509058662.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:42.787Z,1509058662.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:43.167Z,1509058663.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:43.229Z,1509058663.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:43.586Z,1509058663.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:43.670Z,1509058663.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:43.965Z,1509058663.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:44.018Z,1509058664.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:44.366Z,1509058664.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:44.418Z,1509058664.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:44.763Z,1509058664.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:44.801Z,1509058664.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:45.171Z,1509058665.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:45.199Z,1509058665.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:45.616Z,1509058665.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:45.671Z,1509058665.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:45.968Z,1509058665.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:45.985Z,1509058665.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:46.379Z,1509058666.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:46.395Z,1509058666.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:46.778Z,1509058666.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:46.798Z,1509058666.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:47.162Z,1509058667.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:47.197Z,1509058667.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:47.583Z,1509058667.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:47.607Z,1509058667.607 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:47.967Z,1509058667.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:47.995Z,1509058667.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:48.359Z,1509058668.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:48.393Z,1509058668.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:48.781Z,1509058668.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:48.805Z,1509058668.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:49.165Z,1509058669.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:49.193Z,1509058669.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:49.560Z,1509058669.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:49.575Z,1509058669.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:49.965Z,1509058669.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:50.004Z,1509058670.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:50.363Z,1509058670.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:50.400Z,1509058670.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:50.765Z,1509058670.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:50.793Z,1509058670.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:51.200Z,1509058671.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:51.216Z,1509058671.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:51.696Z,1509058671.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:51.711Z,1509058671.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:52.098Z,1509058672.098 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:52.114Z,1509058672.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:52.499Z,1509058672.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:52.515Z,1509058672.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:52.884Z,1509058672.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:52.911Z,1509058672.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:53.291Z,1509058673.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:53.319Z,1509058673.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:53.695Z,1509058673.695 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:53.711Z,1509058673.711 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:54.092Z,1509058674.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:54.108Z,1509058674.108 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:54.492Z,1509058674.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:54.514Z,1509058674.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:54.886Z,1509058674.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:54.914Z,1509058674.914 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:55.294Z,1509058675.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:55.378Z,1509058675.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:55.687Z,1509058675.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:55.724Z,1509058675.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:56.108Z,1509058676.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:56.129Z,1509058676.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:56.484Z,1509058676.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:56.517Z,1509058676.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:56.893Z,1509058676.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:56.951Z,1509058676.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:57.289Z,1509058677.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:57.315Z,1509058677.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:57.686Z,1509058677.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:57.718Z,1509058677.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:58.104Z,1509058678.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:58.161Z,1509058678.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:58.487Z,1509058678.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:58.521Z,1509058678.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:58.892Z,1509058678.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:58.933Z,1509058678.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:59.292Z,1509058679.292 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:59.339Z,1509058679.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:57:59.705Z,1509058679.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:57:59.732Z,1509058679.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:00.097Z,1509058680.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:00.129Z,1509058680.129 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:00.495Z,1509058680.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:00.511Z,1509058680.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:00.895Z,1509058680.895 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:00.985Z,1509058680.985 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:01.284Z,1509058681.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:01.311Z,1509058681.311 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:01.684Z,1509058681.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:01.721Z,1509058681.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:02.108Z,1509058682.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:02.124Z,1509058682.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:02.489Z,1509058682.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:02.524Z,1509058682.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:03.038Z,1509058683.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:03.078Z,1509058683.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:03.426Z,1509058683.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:03.444Z,1509058683.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:03.827Z,1509058683.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:03.849Z,1509058683.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:04.230Z,1509058684.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:04.247Z,1509058684.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:04.626Z,1509058684.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:04.644Z,1509058684.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:05.016Z,1509058685.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:05.046Z,1509058685.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:05.408Z,1509058685.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:05.450Z,1509058685.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:05.853Z,1509058685.853 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:05.876Z,1509058685.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:06.226Z,1509058686.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:06.252Z,1509058686.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:06.617Z,1509058686.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:06.649Z,1509058686.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:07.084Z,1509058687.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:07.116Z,1509058687.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:07.424Z,1509058687.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:07.458Z,1509058687.458 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:07.832Z,1509058687.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:07.847Z,1509058687.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:08.231Z,1509058688.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:08.281Z,1509058688.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:08.620Z,1509058688.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:08.655Z,1509058688.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:09.017Z,1509058689.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:09.047Z,1509058689.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:09.436Z,1509058689.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:09.457Z,1509058689.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:09.820Z,1509058689.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:09.890Z,1509058689.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:10.219Z,1509058690.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:10.249Z,1509058690.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:10.618Z,1509058690.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:10.661Z,1509058690.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:11.017Z,1509058691.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:11.086Z,1509058691.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:11.420Z,1509058691.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:11.477Z,1509058691.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:11.818Z,1509058691.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:11.862Z,1509058691.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:12.218Z,1509058692.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:12.273Z,1509058692.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:12.621Z,1509058692.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:12.663Z,1509058692.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:13.026Z,1509058693.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:13.100Z,1509058693.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:13.106Z,1509058693.106 [Default:CheckIn] Running Loop=1
2017-10-26T22:58:13.106Z,1509058693.106 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-26T22:58:13.106Z,1509058693.106 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-26T22:58:13.426Z,1509058693.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:13.473Z,1509058693.473 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:13.812Z,1509058693.812 [NAL9602](INFO): Powering up
2017-10-26T22:58:13.839Z,1509058693.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:13.867Z,1509058693.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:14.222Z,1509058694.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:14.264Z,1509058694.264 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:14.621Z,1509058694.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:14.694Z,1509058694.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:15.164Z,1509058695.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:15.180Z,1509058695.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:15.557Z,1509058695.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:15.581Z,1509058695.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:15.967Z,1509058695.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:15.982Z,1509058695.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:16.355Z,1509058696.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:16.381Z,1509058696.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:16.756Z,1509058696.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:16.783Z,1509058696.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:17.152Z,1509058697.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:17.186Z,1509058697.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:17.553Z,1509058697.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:17.586Z,1509058697.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:17.955Z,1509058697.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:17.987Z,1509058697.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:18.354Z,1509058698.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:18.391Z,1509058698.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:18.752Z,1509058698.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:18.790Z,1509058698.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:19.173Z,1509058699.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:19.196Z,1509058699.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:19.561Z,1509058699.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:19.589Z,1509058699.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:19.959Z,1509058699.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:19.992Z,1509058699.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:20.358Z,1509058700.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:20.391Z,1509058700.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:20.755Z,1509058700.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:20.772Z,1509058700.772 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:21.197Z,1509058701.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:21.218Z,1509058701.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:21.557Z,1509058701.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:21.594Z,1509058701.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:21.953Z,1509058701.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:21.968Z,1509058701.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:22.354Z,1509058702.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:22.369Z,1509058702.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:22.765Z,1509058702.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:22.807Z,1509058702.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:23.158Z,1509058703.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:23.175Z,1509058703.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:23.562Z,1509058703.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:23.578Z,1509058703.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:23.976Z,1509058703.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:23.992Z,1509058703.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:24.374Z,1509058704.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:24.396Z,1509058704.396 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:24.740Z,1509058704.740 [NAL9602](INFO): NAL9602 initialized
2017-10-26T22:58:24.769Z,1509058704.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:24.824Z,1509058704.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:25.174Z,1509058705.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:25.214Z,1509058705.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:25.549Z,1509058705.549 [NAL9602](FAULT): GPS failed to acquire within timeout.
2017-10-26T22:58:25.549Z,1509058705.549 [NAL9602] Data Fault, FailCount= 1
2017-10-26T22:58:25.549Z,1509058705.549 [NAL9602](ERROR): Data Fault
2017-10-26T22:58:25.597Z,1509058705.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:25.671Z,1509058705.671 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:25.761Z,1509058705.761 [CBIT](ERROR): Data Fault in component: NAL9602
2017-10-26T22:58:25.949Z,1509058705.949 [NAL9602](INFO): Powering down
2017-10-26T22:58:25.967Z,1509058705.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:26.009Z,1509058706.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:26.363Z,1509058706.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:26.420Z,1509058706.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:26.756Z,1509058706.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:26.771Z,1509058706.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:26.851Z,1509058706.851 [CBIT](INFO): Clearing failed state for component NAL9602
2017-10-26T22:58:26.851Z,1509058706.851 [NAL9602] No Fault, FailCount= 1
2017-10-26T22:58:27.157Z,1509058707.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:27.209Z,1509058707.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:27.568Z,1509058707.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:27.714Z,1509058707.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:27.961Z,1509058707.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:27.977Z,1509058707.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:28.361Z,1509058708.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:28.381Z,1509058708.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:28.774Z,1509058708.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:28.791Z,1509058708.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:29.155Z,1509058709.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:29.190Z,1509058709.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:29.571Z,1509058709.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:29.591Z,1509058709.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:29.952Z,1509058709.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:29.990Z,1509058709.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:30.332Z,1509058710.332 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:58:30.353Z,1509058710.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:30.390Z,1509058710.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:30.753Z,1509058710.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:30.786Z,1509058710.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:31.154Z,1509058711.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:31.189Z,1509058711.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:31.563Z,1509058711.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:31.590Z,1509058711.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:31.956Z,1509058711.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:31.994Z,1509058711.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:32.353Z,1509058712.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:32.389Z,1509058712.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:32.757Z,1509058712.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:32.797Z,1509058712.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:33.153Z,1509058713.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:33.196Z,1509058713.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:33.554Z,1509058713.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:33.578Z,1509058713.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:33.958Z,1509058713.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:33.999Z,1509058713.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:34.359Z,1509058714.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:34.393Z,1509058714.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:34.760Z,1509058714.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:34.795Z,1509058714.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:35.188Z,1509058715.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:35.205Z,1509058715.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:35.565Z,1509058715.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:35.598Z,1509058715.598 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:35.953Z,1509058715.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:35.995Z,1509058715.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:36.362Z,1509058716.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:36.398Z,1509058716.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:36.759Z,1509058716.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:36.774Z,1509058716.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:37.159Z,1509058717.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:37.175Z,1509058717.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:37.556Z,1509058717.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:37.579Z,1509058717.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:37.964Z,1509058717.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:37.979Z,1509058717.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:38.365Z,1509058718.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:38.381Z,1509058718.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:38.767Z,1509058718.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:38.830Z,1509058718.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:39.167Z,1509058719.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:39.182Z,1509058719.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:39.598Z,1509058719.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:39.692Z,1509058719.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:39.972Z,1509058719.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:39.992Z,1509058719.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:40.352Z,1509058720.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:40.385Z,1509058720.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:40.753Z,1509058720.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:40.802Z,1509058720.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:41.158Z,1509058721.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:41.190Z,1509058721.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:41.552Z,1509058721.552 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:41.692Z,1509058721.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:41.960Z,1509058721.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:42.012Z,1509058722.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:42.362Z,1509058722.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:42.400Z,1509058722.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:42.753Z,1509058722.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:42.768Z,1509058722.768 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:43.162Z,1509058723.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:43.178Z,1509058723.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:43.562Z,1509058723.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:43.606Z,1509058723.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:43.962Z,1509058723.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:43.983Z,1509058723.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:44.366Z,1509058724.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:44.382Z,1509058724.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:44.763Z,1509058724.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:44.778Z,1509058724.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:45.160Z,1509058725.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:45.180Z,1509058725.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:45.564Z,1509058725.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:45.580Z,1509058725.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:45.966Z,1509058725.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:45.986Z,1509058725.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:46.365Z,1509058726.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:46.380Z,1509058726.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:46.760Z,1509058726.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:46.776Z,1509058726.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:47.169Z,1509058727.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:47.185Z,1509058727.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:47.563Z,1509058727.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:47.579Z,1509058727.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:47.958Z,1509058727.958 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:47.975Z,1509058727.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:48.369Z,1509058728.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:48.385Z,1509058728.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:48.761Z,1509058728.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:48.777Z,1509058728.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:49.162Z,1509058729.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:49.183Z,1509058729.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:49.568Z,1509058729.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:49.584Z,1509058729.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:49.967Z,1509058729.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:49.982Z,1509058729.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:50.360Z,1509058730.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:50.376Z,1509058730.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:50.761Z,1509058730.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:50.781Z,1509058730.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:51.159Z,1509058731.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:51.180Z,1509058731.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:51.561Z,1509058731.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:51.585Z,1509058731.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:51.967Z,1509058731.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:51.983Z,1509058731.983 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:52.368Z,1509058732.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:52.383Z,1509058732.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:52.762Z,1509058732.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:52.783Z,1509058732.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:53.163Z,1509058733.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:53.220Z,1509058733.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:53.565Z,1509058733.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:53.581Z,1509058733.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:53.954Z,1509058733.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:54.014Z,1509058734.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:54.359Z,1509058734.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:54.386Z,1509058734.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:54.759Z,1509058734.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:54.812Z,1509058734.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:55.156Z,1509058735.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:55.184Z,1509058735.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:55.561Z,1509058735.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:55.628Z,1509058735.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:55.952Z,1509058735.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:55.994Z,1509058735.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:56.348Z,1509058736.348 [NAL9602](INFO): Powering up NAL9602
2017-10-26T22:58:56.367Z,1509058736.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:56.407Z,1509058736.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:56.762Z,1509058736.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:56.783Z,1509058736.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:57.164Z,1509058737.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:57.197Z,1509058737.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:57.560Z,1509058737.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:57.576Z,1509058737.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:57.968Z,1509058737.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:57.989Z,1509058737.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:58.363Z,1509058738.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:58.381Z,1509058738.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:58.765Z,1509058738.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:58.781Z,1509058738.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:59.166Z,1509058739.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:59.182Z,1509058739.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:59.561Z,1509058739.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:59.588Z,1509058739.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:58:59.963Z,1509058739.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:58:59.991Z,1509058739.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:00.356Z,1509058740.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:00.383Z,1509058740.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:00.752Z,1509058740.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:00.781Z,1509058740.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:01.153Z,1509058741.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:01.214Z,1509058741.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:01.584Z,1509058741.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:01.672Z,1509058741.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:01.959Z,1509058741.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:01.974Z,1509058741.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:02.362Z,1509058742.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:02.378Z,1509058742.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:02.767Z,1509058742.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:02.788Z,1509058742.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:03.164Z,1509058743.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:03.179Z,1509058743.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:03.575Z,1509058743.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:03.664Z,1509058743.664 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:03.966Z,1509058743.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:03.982Z,1509058743.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:04.366Z,1509058744.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:04.381Z,1509058744.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:04.762Z,1509058744.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:04.778Z,1509058744.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:05.168Z,1509058745.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:05.190Z,1509058745.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:05.572Z,1509058745.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:05.592Z,1509058745.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:05.965Z,1509058745.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:05.980Z,1509058745.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:06.369Z,1509058746.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:06.390Z,1509058746.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:06.762Z,1509058746.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:06.777Z,1509058746.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:07.174Z,1509058747.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:07.190Z,1509058747.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:07.546Z,1509058747.546 [NAL9602](INFO): NAL9602 initialized
2017-10-26T22:59:07.575Z,1509058747.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:07.591Z,1509058747.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:07.963Z,1509058747.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:08.017Z,1509058748.017 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:08.375Z,1509058748.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:08.391Z,1509058748.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:08.782Z,1509058748.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:08.834Z,1509058748.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:09.174Z,1509058749.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:09.194Z,1509058749.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:09.554Z,1509058749.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:09.621Z,1509058749.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:09.976Z,1509058749.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:10.031Z,1509058750.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:10.356Z,1509058750.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:10.384Z,1509058750.384 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:10.743Z,1509058750.743 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2017-10-26T22:59:10.771Z,1509058750.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:10.795Z,1509058750.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:11.152Z,1509058751.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:11.180Z,1509058751.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:11.581Z,1509058751.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:11.601Z,1509058751.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:11.982Z,1509058751.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:12.006Z,1509058752.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:12.385Z,1509058752.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:12.407Z,1509058752.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:12.756Z,1509058752.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:12.795Z,1509058752.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:13.157Z,1509058753.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:13.194Z,1509058753.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:13.561Z,1509058753.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:13.593Z,1509058753.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:13.975Z,1509058753.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:14.001Z,1509058754.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:14.372Z,1509058754.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:14.400Z,1509058754.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:14.788Z,1509058754.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:14.804Z,1509058754.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:15.167Z,1509058755.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:15.205Z,1509058755.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:15.606Z,1509058755.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:15.655Z,1509058755.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:15.965Z,1509058755.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:15.989Z,1509058755.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:16.374Z,1509058756.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:16.389Z,1509058756.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:16.766Z,1509058756.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:16.782Z,1509058756.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:17.177Z,1509058757.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:17.194Z,1509058757.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:17.601Z,1509058757.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:17.652Z,1509058757.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:17.981Z,1509058757.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:17.997Z,1509058757.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:18.355Z,1509058758.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:18.371Z,1509058758.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:18.757Z,1509058758.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:18.801Z,1509058758.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:19.162Z,1509058759.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:19.206Z,1509058759.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:19.562Z,1509058759.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:19.582Z,1509058759.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:19.977Z,1509058759.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:20.015Z,1509058760.015 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:20.381Z,1509058760.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:20.408Z,1509058760.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:20.766Z,1509058760.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:20.788Z,1509058760.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:21.159Z,1509058761.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:21.183Z,1509058761.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:21.561Z,1509058761.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:21.625Z,1509058761.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:21.969Z,1509058761.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:22.034Z,1509058762.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:22.355Z,1509058762.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:22.390Z,1509058762.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:22.754Z,1509058762.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:22.817Z,1509058762.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:23.175Z,1509058763.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:23.190Z,1509058763.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:23.582Z,1509058763.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:23.623Z,1509058763.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:23.976Z,1509058763.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:24.032Z,1509058764.032 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:24.374Z,1509058764.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:24.393Z,1509058764.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:24.768Z,1509058764.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:24.783Z,1509058764.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:25.156Z,1509058765.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:25.184Z,1509058765.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:25.572Z,1509058765.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:25.587Z,1509058765.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:25.979Z,1509058765.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:25.000Z,1509058766.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:26.380Z,1509058766.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:26.401Z,1509058766.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:26.776Z,1509058766.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:26.797Z,1509058766.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:27.158Z,1509058767.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:27.194Z,1509058767.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:27.559Z,1509058767.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:27.575Z,1509058767.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:27.960Z,1509058767.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:27.988Z,1509058767.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:28.365Z,1509058768.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:28.381Z,1509058768.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:28.765Z,1509058768.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:28.788Z,1509058768.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:29.167Z,1509058769.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:29.182Z,1509058769.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:29.616Z,1509058769.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:29.649Z,1509058769.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:29.968Z,1509058769.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:29.984Z,1509058769.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:30.337Z,1509058770.337 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T22:59:30.369Z,1509058770.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:30.394Z,1509058770.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:30.769Z,1509058770.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:30.784Z,1509058770.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:31.169Z,1509058771.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:31.185Z,1509058771.185 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:31.620Z,1509058771.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:31.657Z,1509058771.657 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:31.964Z,1509058771.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:32.005Z,1509058772.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:32.385Z,1509058772.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:32.406Z,1509058772.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:32.772Z,1509058772.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:32.802Z,1509058772.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:33.159Z,1509058773.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:33.175Z,1509058773.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:33.563Z,1509058773.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:33.600Z,1509058773.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:33.961Z,1509058773.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:33.977Z,1509058773.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:34.356Z,1509058774.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:34.400Z,1509058774.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:34.760Z,1509058774.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:34.776Z,1509058774.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:35.165Z,1509058775.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:35.181Z,1509058775.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:35.585Z,1509058775.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:35.619Z,1509058775.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:35.966Z,1509058775.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:36.031Z,1509058776.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:36.368Z,1509058776.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:36.425Z,1509058776.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:36.777Z,1509058776.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:36.793Z,1509058776.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:37.175Z,1509058777.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:37.229Z,1509058777.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:37.570Z,1509058777.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:37.585Z,1509058777.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:37.976Z,1509058777.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:38.027Z,1509058778.027 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:38.376Z,1509058778.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:38.428Z,1509058778.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:38.777Z,1509058778.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:38.800Z,1509058778.800 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:39.166Z,1509058779.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:39.187Z,1509058779.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:39.553Z,1509058779.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:39.585Z,1509058779.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:39.957Z,1509058779.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:39.989Z,1509058779.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:40.370Z,1509058780.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:40.386Z,1509058780.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:40.749Z,1509058780.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:40.781Z,1509058780.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:41.171Z,1509058781.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:41.193Z,1509058781.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:41.591Z,1509058781.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:41.612Z,1509058781.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:41.967Z,1509058781.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:41.999Z,1509058781.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:42.353Z,1509058782.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:42.368Z,1509058782.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:42.764Z,1509058782.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:42.796Z,1509058782.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:43.161Z,1509058783.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:43.177Z,1509058783.177 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:43.622Z,1509058783.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:43.670Z,1509058783.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:43.974Z,1509058783.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:44.005Z,1509058784.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:44.379Z,1509058784.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:44.401Z,1509058784.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:44.763Z,1509058784.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:44.785Z,1509058784.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:45.173Z,1509058785.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:45.209Z,1509058785.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:45.572Z,1509058785.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:45.642Z,1509058785.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:45.977Z,1509058785.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:45.994Z,1509058785.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:46.378Z,1509058786.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:46.394Z,1509058786.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:46.775Z,1509058786.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:46.791Z,1509058786.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:47.152Z,1509058787.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:47.189Z,1509058787.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:47.555Z,1509058787.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:47.587Z,1509058787.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:47.954Z,1509058787.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:48.002Z,1509058788.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:48.387Z,1509058788.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:48.411Z,1509058788.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:48.783Z,1509058788.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:48.799Z,1509058788.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:49.166Z,1509058789.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:49.194Z,1509058789.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:49.556Z,1509058789.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:49.572Z,1509058789.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:49.962Z,1509058789.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:49.994Z,1509058789.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:50.358Z,1509058790.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:50.417Z,1509058790.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:50.772Z,1509058790.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:50.854Z,1509058790.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:51.170Z,1509058791.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:51.191Z,1509058791.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:51.570Z,1509058791.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:51.620Z,1509058791.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:51.966Z,1509058791.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:51.981Z,1509058791.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:52.370Z,1509058792.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:52.417Z,1509058792.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:52.762Z,1509058792.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:52.821Z,1509058792.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:53.166Z,1509058793.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:53.186Z,1509058793.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:53.569Z,1509058793.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:53.591Z,1509058793.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:53.978Z,1509058793.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:53.000Z,1509058794.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:54.380Z,1509058794.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:54.395Z,1509058794.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:54.777Z,1509058794.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:54.793Z,1509058794.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:55.171Z,1509058795.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:55.187Z,1509058795.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:55.566Z,1509058795.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:55.595Z,1509058795.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:55.955Z,1509058795.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:55.992Z,1509058795.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:56.363Z,1509058796.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:56.394Z,1509058796.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:56.786Z,1509058796.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:56.806Z,1509058796.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:57.171Z,1509058797.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:57.207Z,1509058797.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:57.622Z,1509058797.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:57.652Z,1509058797.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:57.959Z,1509058797.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:57.982Z,1509058797.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:58.360Z,1509058798.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:58.376Z,1509058798.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:58.760Z,1509058798.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:58.793Z,1509058798.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:59.166Z,1509058799.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:59.181Z,1509058799.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:59.602Z,1509058799.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T22:59:59.654Z,1509058799.654 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T22:59:59.972Z,1509058799.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:00.001Z,1509058800.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:00.383Z,1509058800.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:00.399Z,1509058800.399 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:00.772Z,1509058800.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:00.802Z,1509058800.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:01.159Z,1509058801.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:01.195Z,1509058801.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:01.560Z,1509058801.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:01.589Z,1509058801.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:01.967Z,1509058801.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:01.988Z,1509058801.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:02.369Z,1509058802.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:02.385Z,1509058802.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:02.779Z,1509058802.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:02.795Z,1509058802.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:03.184Z,1509058803.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:03.206Z,1509058803.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:03.581Z,1509058803.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:03.596Z,1509058803.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:03.954Z,1509058803.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:03.993Z,1509058803.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:04.378Z,1509058804.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:04.394Z,1509058804.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:04.764Z,1509058804.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:04.852Z,1509058804.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:05.161Z,1509058805.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:05.189Z,1509058805.189 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:05.563Z,1509058805.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:05.579Z,1509058805.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:05.972Z,1509058805.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:06.018Z,1509058806.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:06.372Z,1509058806.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:06.395Z,1509058806.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:06.769Z,1509058806.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:06.817Z,1509058806.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:07.167Z,1509058807.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:07.220Z,1509058807.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:07.568Z,1509058807.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:07.589Z,1509058807.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:07.964Z,1509058807.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:07.980Z,1509058807.980 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:08.354Z,1509058808.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:08.391Z,1509058808.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:08.773Z,1509058808.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:08.794Z,1509058808.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:09.181Z,1509058809.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:09.263Z,1509058809.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:09.578Z,1509058809.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:09.608Z,1509058809.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:09.968Z,1509058809.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:10.006Z,1509058810.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:10.353Z,1509058810.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:10.369Z,1509058810.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:10.766Z,1509058810.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:10.786Z,1509058810.786 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:10.786Z,1509058810.786 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 64
2017-10-26T23:00:10.786Z,1509058810.786 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T23:00:10.806Z,1509058810.806 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:10.806Z,1509058810.806 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 64
2017-10-26T23:00:10.806Z,1509058810.806 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T23:00:10.836Z,1509058810.836 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T23:00:10.837Z,1509058810.837 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T23:00:11.173Z,1509058811.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:11.227Z,1509058811.227 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T23:00:11.227Z,1509058811.227 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 64
2017-10-26T23:00:11.232Z,1509058811.232 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T23:00:11.232Z,1509058811.232 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 64
2017-10-26T23:00:11.583Z,1509058811.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:11.643Z,1509058811.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T23:00:11.644Z,1509058811.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T23:00:11.644Z,1509058811.644 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T23:00:11.650Z,1509058811.650 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T23:00:11.651Z,1509058811.651 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T23:00:11.651Z,1509058811.651 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T23:00:11.966Z,1509058811.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:11.998Z,1509058811.998 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:12.379Z,1509058812.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:12.412Z,1509058812.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:12.769Z,1509058812.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:12.805Z,1509058812.805 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:13.154Z,1509058813.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:13.178Z,1509058813.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:13.576Z,1509058813.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:13.659Z,1509058813.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:13.961Z,1509058813.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:13.977Z,1509058813.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:14.368Z,1509058814.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:14.429Z,1509058814.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:14.770Z,1509058814.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:14.804Z,1509058814.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:15.170Z,1509058815.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:15.196Z,1509058815.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:15.571Z,1509058815.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:15.605Z,1509058815.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:15.965Z,1509058815.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:15.997Z,1509058815.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:16.354Z,1509058816.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:16.370Z,1509058816.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:16.760Z,1509058816.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:16.776Z,1509058816.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:17.166Z,1509058817.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:17.182Z,1509058817.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:17.563Z,1509058817.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:17.582Z,1509058817.582 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:17.966Z,1509058817.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:17.989Z,1509058817.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:18.372Z,1509058818.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:18.388Z,1509058818.388 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:18.772Z,1509058818.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:18.794Z,1509058818.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:19.163Z,1509058819.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:19.242Z,1509058819.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:19.571Z,1509058819.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:19.587Z,1509058819.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:19.957Z,1509058819.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:19.000Z,1509058820.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:20.368Z,1509058820.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:20.438Z,1509058820.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:20.771Z,1509058820.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:20.801Z,1509058820.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:21.172Z,1509058821.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:21.226Z,1509058821.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:21.569Z,1509058821.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:21.626Z,1509058821.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:21.962Z,1509058821.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:21.997Z,1509058821.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:22.363Z,1509058822.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:22.378Z,1509058822.378 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:22.765Z,1509058822.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:22.781Z,1509058822.781 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:23.167Z,1509058823.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:23.183Z,1509058823.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:23.553Z,1509058823.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:23.591Z,1509058823.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:23.977Z,1509058823.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:23.993Z,1509058823.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:24.379Z,1509058824.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:24.436Z,1509058824.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:24.767Z,1509058824.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:24.815Z,1509058824.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:25.218Z,1509058825.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:25.249Z,1509058825.249 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:25.597Z,1509058825.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:25.722Z,1509058825.722 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:26.015Z,1509058826.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:26.100Z,1509058826.100 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:26.389Z,1509058826.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:26.434Z,1509058826.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:26.775Z,1509058826.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:26.814Z,1509058826.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:27.175Z,1509058827.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:27.211Z,1509058827.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:27.622Z,1509058827.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:27.663Z,1509058827.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:27.965Z,1509058827.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:27.000Z,1509058828.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:28.367Z,1509058828.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:28.394Z,1509058828.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:28.760Z,1509058828.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:28.808Z,1509058828.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:29.215Z,1509058829.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:29.312Z,1509058829.312 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:29.601Z,1509058829.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:29.649Z,1509058829.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:30.040Z,1509058830.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:30.089Z,1509058830.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:30.341Z,1509058830.341 [DataOverHttps](INFO): Exceeded connect timeout, disconnecting.
2017-10-26T23:00:30.407Z,1509058830.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:30.468Z,1509058830.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:30.774Z,1509058830.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:30.829Z,1509058830.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:31.174Z,1509058831.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:31.255Z,1509058831.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:31.577Z,1509058831.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:31.638Z,1509058831.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:31.971Z,1509058831.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:31.988Z,1509058831.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:32.374Z,1509058832.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:32.439Z,1509058832.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:32.782Z,1509058832.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:32.804Z,1509058832.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:33.183Z,1509058833.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:33.200Z,1509058833.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:33.563Z,1509058833.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:33.649Z,1509058833.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:33.961Z,1509058833.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:33.992Z,1509058833.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:34.359Z,1509058834.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:34.402Z,1509058834.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:34.760Z,1509058834.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:34.791Z,1509058834.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:35.170Z,1509058835.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:35.241Z,1509058835.241 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:35.564Z,1509058835.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:35.609Z,1509058835.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:35.967Z,1509058835.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:36.001Z,1509058836.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:36.375Z,1509058836.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:36.402Z,1509058836.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:36.776Z,1509058836.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:36.806Z,1509058836.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:37.160Z,1509058837.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:37.176Z,1509058837.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:37.558Z,1509058837.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:37.578Z,1509058837.578 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:37.966Z,1509058837.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:37.982Z,1509058837.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:38.357Z,1509058838.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:38.380Z,1509058838.380 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:38.772Z,1509058838.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:38.787Z,1509058838.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:39.172Z,1509058839.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:39.187Z,1509058839.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:39.594Z,1509058839.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:39.660Z,1509058839.660 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:39.962Z,1509058839.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:39.990Z,1509058839.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:40.355Z,1509058840.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:40.391Z,1509058840.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:40.755Z,1509058840.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:40.796Z,1509058840.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:41.162Z,1509058841.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:41.194Z,1509058841.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:41.581Z,1509058841.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:41.656Z,1509058841.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:41.972Z,1509058841.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:42.000Z,1509058842.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:42.373Z,1509058842.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:42.401Z,1509058842.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:42.777Z,1509058842.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:42.814Z,1509058842.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:43.159Z,1509058843.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:43.187Z,1509058843.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:43.564Z,1509058843.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:43.589Z,1509058843.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:43.965Z,1509058843.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:43.981Z,1509058843.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:44.355Z,1509058844.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:44.408Z,1509058844.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:44.773Z,1509058844.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:44.811Z,1509058844.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:45.196Z,1509058845.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:45.230Z,1509058845.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:45.576Z,1509058845.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:45.625Z,1509058845.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:45.990Z,1509058845.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:46.014Z,1509058846.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:46.363Z,1509058846.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:46.432Z,1509058846.432 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:46.755Z,1509058846.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:46.801Z,1509058846.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:47.158Z,1509058847.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:47.207Z,1509058847.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:47.556Z,1509058847.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:47.698Z,1509058847.698 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:47.828Z,1509058847.828 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-10-26T23:00:47.828Z,1509058847.828 [Rowe_600LCM] Communications Fault, FailCount= 1
2017-10-26T23:00:47.828Z,1509058847.828 [Rowe_600LCM](ERROR): Communications Fault
2017-10-26T23:00:47.969Z,1509058847.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:48.001Z,1509058848.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.3 s old, using for 20.0 s.
2017-10-26T23:00:48.002Z,1509058848.002 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:48.039Z,1509058848.039 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-10-26T23:00:48.233Z,1509058848.233 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-10-26T23:00:48.386Z,1509058848.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:48.485Z,1509058848.485 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-10-26T23:00:48.506Z,1509058848.506 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:48.636Z,1509058848.636 [Rowe_600LCM](INFO): Powering down
2017-10-26T23:00:48.777Z,1509058848.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:48.824Z,1509058848.824 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.1 s old, using for 20.0 s.
2017-10-26T23:00:48.825Z,1509058848.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:49.161Z,1509058849.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:49.217Z,1509058849.217 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s.
2017-10-26T23:00:49.231Z,1509058849.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:49.569Z,1509058849.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:49.668Z,1509058849.668 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-10-26T23:00:49.669Z,1509058849.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:49.967Z,1509058849.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:49.991Z,1509058849.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2017-10-26T23:00:49.992Z,1509058849.992 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:50.065Z,1509058850.065 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-10-26T23:00:50.065Z,1509058850.065 [Rowe_600LCM] No Fault, FailCount= 1
2017-10-26T23:00:50.244Z,1509058850.244 [Rowe_600LCM](INFO): Initializing
2017-10-26T23:00:50.245Z,1509058850.245 [Rowe_600LCM](INFO): Checking LCM
2017-10-26T23:00:50.245Z,1509058850.245 [Rowe_600LCM](INFO): LCM OK
2017-10-26T23:00:50.245Z,1509058850.245 [Rowe_600LCM](INFO): Powering up
2017-10-26T23:00:50.366Z,1509058850.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:50.391Z,1509058850.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.7 s old, using for 20.0 s.
2017-10-26T23:00:50.421Z,1509058850.421 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:50.776Z,1509058850.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:50.825Z,1509058850.825 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.1 s old, using for 20.0 s.
2017-10-26T23:00:50.826Z,1509058850.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:51.181Z,1509058851.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:51.227Z,1509058851.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2017-10-26T23:00:51.228Z,1509058851.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:51.573Z,1509058851.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:51.593Z,1509058851.593 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-10-26T23:00:51.599Z,1509058851.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:51.997Z,1509058851.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:52.061Z,1509058852.061 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-10-26T23:00:52.096Z,1509058852.096 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:52.397Z,1509058852.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:52.478Z,1509058852.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-10-26T23:00:52.479Z,1509058852.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:52.793Z,1509058852.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:52.845Z,1509058852.845 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-10-26T23:00:52.846Z,1509058852.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:53.184Z,1509058853.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:53.208Z,1509058853.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-10-26T23:00:53.209Z,1509058853.209 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:53.581Z,1509058853.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:53.655Z,1509058853.655 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-10-26T23:00:53.656Z,1509058853.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:53.972Z,1509058853.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:54.008Z,1509058854.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.3 s old, using for 20.0 s.
2017-10-26T23:00:54.009Z,1509058854.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:54.379Z,1509058854.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:54.443Z,1509058854.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.7 s old, using for 20.0 s.
2017-10-26T23:00:54.444Z,1509058854.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:54.623Z,1509058854.623 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-10-26T23:00:54.742Z,1509058854.742 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-10-26T23:00:54.744Z,1509058854.744 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-10-26T23:00:54.745Z,1509058854.745 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-10-26T23:00:54.746Z,1509058854.746 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-10-26T23:00:54.766Z,1509058854.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:54.846Z,1509058854.846 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.1 s old, using for 20.0 s.
2017-10-26T23:00:54.847Z,1509058854.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:55.166Z,1509058855.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:55.220Z,1509058855.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:55.571Z,1509058855.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:55.669Z,1509058855.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:56.013Z,1509058856.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:56.047Z,1509058856.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:56.363Z,1509058856.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:56.392Z,1509058856.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:56.797Z,1509058856.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:56.836Z,1509058856.836 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:57.172Z,1509058857.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:57.199Z,1509058857.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:57.565Z,1509058857.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:57.597Z,1509058857.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:58.039Z,1509058858.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:58.109Z,1509058858.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:58.391Z,1509058858.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:58.435Z,1509058858.435 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:58.759Z,1509058858.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:58.797Z,1509058858.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:59.181Z,1509058859.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:59.229Z,1509058859.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:00:59.584Z,1509058859.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:00:59.625Z,1509058859.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:00.018Z,1509058860.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:00.047Z,1509058860.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:00.384Z,1509058860.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:00.400Z,1509058860.400 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:00.788Z,1509058860.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:00.811Z,1509058860.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:04.202Z,1509058864.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:04.284Z,1509058864.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:04.388Z,1509058864.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:04.422Z,1509058864.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:04.779Z,1509058864.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:04.797Z,1509058864.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:05.143Z,1509058865.143 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.002506
2017-10-26T23:01:05.188Z,1509058865.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:05.246Z,1509058865.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:05.578Z,1509058865.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:05.599Z,1509058865.599 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:06.002Z,1509058866.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:06.066Z,1509058866.066 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:06.376Z,1509058866.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:06.392Z,1509058866.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:06.778Z,1509058866.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:06.833Z,1509058866.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:07.176Z,1509058867.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:07.192Z,1509058867.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:07.573Z,1509058867.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:07.589Z,1509058867.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:07.977Z,1509058867.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:08.001Z,1509058868.001 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:08.385Z,1509058868.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:08.401Z,1509058868.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:08.782Z,1509058868.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:08.798Z,1509058868.798 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:09.184Z,1509058869.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:09.200Z,1509058869.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:09.573Z,1509058869.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:09.589Z,1509058869.589 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:09.975Z,1509058869.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:10.004Z,1509058870.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:10.372Z,1509058870.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:10.398Z,1509058870.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:10.781Z,1509058870.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:10.808Z,1509058870.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:11.182Z,1509058871.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:11.201Z,1509058871.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:11.591Z,1509058871.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:11.606Z,1509058871.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:11.964Z,1509058871.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:11.997Z,1509058871.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:12.364Z,1509058872.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:12.397Z,1509058872.397 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:12.765Z,1509058872.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:12.802Z,1509058872.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:13.168Z,1509058873.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:13.183Z,1509058873.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:13.563Z,1509058873.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:13.603Z,1509058873.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:13.987Z,1509058873.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:14.028Z,1509058874.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:14.387Z,1509058874.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:14.413Z,1509058874.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:14.783Z,1509058874.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:14.813Z,1509058874.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:15.178Z,1509058875.178 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:15.210Z,1509058875.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:15.571Z,1509058875.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:15.586Z,1509058875.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:15.979Z,1509058875.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:15.995Z,1509058875.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:16.379Z,1509058876.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:16.405Z,1509058876.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:16.778Z,1509058876.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:16.796Z,1509058876.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:17.179Z,1509058877.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:17.195Z,1509058877.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:17.579Z,1509058877.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:17.595Z,1509058877.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:17.973Z,1509058877.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:17.994Z,1509058877.994 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:18.366Z,1509058878.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:18.387Z,1509058878.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:18.764Z,1509058878.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:18.827Z,1509058878.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:19.170Z,1509058879.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:19.186Z,1509058879.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:19.565Z,1509058879.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:19.612Z,1509058879.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:19.986Z,1509058879.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:20.006Z,1509058880.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:20.379Z,1509058880.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:20.418Z,1509058880.418 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:20.825Z,1509058880.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:20.894Z,1509058880.894 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:21.166Z,1509058881.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:21.187Z,1509058881.187 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:21.565Z,1509058881.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:21.580Z,1509058881.580 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:21.979Z,1509058881.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:22.024Z,1509058882.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:22.364Z,1509058882.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:22.393Z,1509058882.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:22.775Z,1509058882.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:22.814Z,1509058882.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:23.182Z,1509058883.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:23.203Z,1509058883.203 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:23.581Z,1509058883.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:23.601Z,1509058883.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:24.002Z,1509058884.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:24.053Z,1509058884.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:24.367Z,1509058884.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:24.394Z,1509058884.394 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:24.764Z,1509058884.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:24.797Z,1509058884.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:25.167Z,1509058885.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:25.199Z,1509058885.199 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:25.581Z,1509058885.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:25.597Z,1509058885.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:26.019Z,1509058886.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:26.052Z,1509058886.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:26.391Z,1509058886.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:26.416Z,1509058886.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:26.782Z,1509058886.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:26.802Z,1509058886.802 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:27.168Z,1509058887.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:27.196Z,1509058887.196 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:27.565Z,1509058887.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:27.597Z,1509058887.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:28.001Z,1509058888.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:28.045Z,1509058888.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:28.372Z,1509058888.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:28.404Z,1509058888.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:28.785Z,1509058888.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:28.812Z,1509058888.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:29.190Z,1509058889.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:29.223Z,1509058889.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:29.579Z,1509058889.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:29.611Z,1509058889.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:29.973Z,1509058889.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:29.996Z,1509058889.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:30.374Z,1509058890.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:30.414Z,1509058890.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:30.775Z,1509058890.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:30.792Z,1509058890.792 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:31.177Z,1509058891.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:31.193Z,1509058891.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:31.575Z,1509058891.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:31.591Z,1509058891.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:31.981Z,1509058891.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:31.997Z,1509058891.997 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:32.382Z,1509058892.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:32.404Z,1509058892.404 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:32.775Z,1509058892.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:32.868Z,1509058892.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:33.169Z,1509058893.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:33.206Z,1509058893.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:33.568Z,1509058893.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:33.600Z,1509058893.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:33.973Z,1509058893.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:34.035Z,1509058894.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:34.396Z,1509058894.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:34.518Z,1509058894.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:34.782Z,1509058894.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:34.829Z,1509058894.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:35.183Z,1509058895.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:35.229Z,1509058895.229 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:35.588Z,1509058895.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:35.612Z,1509058895.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:35.972Z,1509058895.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:36.037Z,1509058896.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:36.366Z,1509058896.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:36.398Z,1509058896.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:36.766Z,1509058896.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:36.794Z,1509058896.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:37.184Z,1509058897.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:37.200Z,1509058897.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:37.565Z,1509058897.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:37.597Z,1509058897.597 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:37.997Z,1509058897.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:38.019Z,1509058898.019 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:38.389Z,1509058898.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:38.405Z,1509058898.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:38.773Z,1509058898.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:38.806Z,1509058898.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:39.166Z,1509058899.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:39.195Z,1509058899.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:39.568Z,1509058899.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:39.584Z,1509058899.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:39.998Z,1509058899.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:40.028Z,1509058900.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:40.369Z,1509058900.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:40.386Z,1509058900.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:40.784Z,1509058900.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:40.817Z,1509058900.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:41.185Z,1509058901.185 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:41.211Z,1509058901.211 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:41.584Z,1509058901.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:41.615Z,1509058901.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:41.980Z,1509058901.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:42.045Z,1509058902.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:42.369Z,1509058902.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:42.385Z,1509058902.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:42.771Z,1509058902.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:42.786Z,1509058902.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:43.180Z,1509058903.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:43.195Z,1509058903.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:43.572Z,1509058903.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:43.588Z,1509058903.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:43.992Z,1509058903.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:44.024Z,1509058904.024 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:44.377Z,1509058904.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:44.393Z,1509058904.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:44.780Z,1509058904.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:44.796Z,1509058904.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:45.170Z,1509058905.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:45.192Z,1509058905.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:45.578Z,1509058905.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:45.595Z,1509058905.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:45.977Z,1509058905.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:45.993Z,1509058905.993 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:46.375Z,1509058906.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:46.390Z,1509058906.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:46.778Z,1509058906.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:46.806Z,1509058906.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:47.186Z,1509058907.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:47.268Z,1509058907.268 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:47.583Z,1509058907.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:47.603Z,1509058907.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:47.968Z,1509058907.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:47.996Z,1509058907.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:48.365Z,1509058908.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:48.417Z,1509058908.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:48.773Z,1509058908.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:48.809Z,1509058908.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:49.176Z,1509058909.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:49.223Z,1509058909.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:49.570Z,1509058909.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:49.627Z,1509058909.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:50.017Z,1509058910.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:50.033Z,1509058910.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:50.387Z,1509058910.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:50.414Z,1509058910.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:50.783Z,1509058910.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:50.807Z,1509058910.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:51.177Z,1509058911.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:51.208Z,1509058911.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:51.570Z,1509058911.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:51.585Z,1509058911.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:51.987Z,1509058911.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:52.023Z,1509058912.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:52.375Z,1509058912.375 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:52.407Z,1509058912.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:52.782Z,1509058912.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:52.815Z,1509058912.815 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:53.179Z,1509058913.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:53.215Z,1509058913.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:53.583Z,1509058913.583 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:53.615Z,1509058913.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:54.004Z,1509058914.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:54.035Z,1509058914.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:54.371Z,1509058914.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:54.387Z,1509058914.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:54.769Z,1509058914.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:54.785Z,1509058914.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:55.175Z,1509058915.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:55.190Z,1509058915.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:55.575Z,1509058915.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:55.609Z,1509058915.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:56.019Z,1509058916.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:56.036Z,1509058916.036 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:56.387Z,1509058916.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:56.439Z,1509058916.439 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:56.777Z,1509058916.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:56.796Z,1509058916.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:57.166Z,1509058917.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:57.190Z,1509058917.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:57.573Z,1509058917.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:57.596Z,1509058917.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:57.975Z,1509058917.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:57.000Z,1509058918.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:58.374Z,1509058918.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:58.390Z,1509058918.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:58.788Z,1509058918.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:58.809Z,1509058918.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:59.188Z,1509058919.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:59.204Z,1509058919.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:59.592Z,1509058919.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:01:59.608Z,1509058919.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:01:59.982Z,1509058919.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:00.003Z,1509058920.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:00.382Z,1509058920.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:00.398Z,1509058920.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:00.795Z,1509058920.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:00.811Z,1509058920.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:04.310Z,1509058924.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:04.383Z,1509058924.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:04.489Z,1509058924.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:04.526Z,1509058924.526 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:04.869Z,1509058924.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:04.885Z,1509058924.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:05.273Z,1509058925.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:05.313Z,1509058925.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:05.674Z,1509058925.674 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:05.692Z,1509058925.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:06.049Z,1509058926.049 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:06.115Z,1509058926.115 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:06.449Z,1509058926.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:06.507Z,1509058926.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:06.850Z,1509058926.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:06.890Z,1509058926.890 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:07.253Z,1509058927.253 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:07.286Z,1509058927.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:07.646Z,1509058927.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:07.683Z,1509058927.683 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:08.077Z,1509058928.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:08.094Z,1509058928.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:08.484Z,1509058928.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:08.504Z,1509058928.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:08.874Z,1509058928.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:08.891Z,1509058928.891 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:09.246Z,1509058929.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:09.262Z,1509058929.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:09.657Z,1509058929.657 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:09.694Z,1509058929.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:10.073Z,1509058930.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:10.097Z,1509058930.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:10.455Z,1509058930.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:10.479Z,1509058930.479 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:10.866Z,1509058930.866 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:10.893Z,1509058930.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:11.266Z,1509058931.266 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:11.290Z,1509058931.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:11.663Z,1509058931.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:11.689Z,1509058931.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:12.057Z,1509058932.057 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:12.092Z,1509058932.092 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:12.455Z,1509058932.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:12.477Z,1509058932.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:12.852Z,1509058932.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:12.867Z,1509058932.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:13.263Z,1509058933.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:13.284Z,1509058933.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:13.661Z,1509058933.661 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:13.676Z,1509058933.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:14.066Z,1509058934.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:14.082Z,1509058934.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:14.507Z,1509058934.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:14.540Z,1509058934.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:14.869Z,1509058934.869 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:14.889Z,1509058934.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:15.246Z,1509058935.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:15.274Z,1509058935.274 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:15.651Z,1509058935.651 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:15.679Z,1509058935.679 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:16.050Z,1509058936.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:16.079Z,1509058936.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:16.511Z,1509058936.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:16.544Z,1509058936.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:16.876Z,1509058936.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:16.892Z,1509058936.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:17.260Z,1509058937.260 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:17.288Z,1509058937.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:17.665Z,1509058937.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:17.694Z,1509058937.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:18.056Z,1509058938.056 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:18.072Z,1509058938.072 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:18.455Z,1509058938.455 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:18.476Z,1509058938.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:18.855Z,1509058938.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:18.924Z,1509058938.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:19.264Z,1509058939.264 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:19.285Z,1509058939.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:19.658Z,1509058939.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:19.706Z,1509058939.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:20.058Z,1509058940.058 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:20.094Z,1509058940.094 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:20.465Z,1509058940.465 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:20.515Z,1509058940.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:20.865Z,1509058940.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:20.910Z,1509058940.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:21.256Z,1509058941.256 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:21.272Z,1509058941.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:21.665Z,1509058941.665 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:21.680Z,1509058941.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:22.063Z,1509058942.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:22.079Z,1509058942.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:22.460Z,1509058942.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:22.475Z,1509058942.475 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:22.868Z,1509058942.868 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:22.884Z,1509058942.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:02:23.237Z,1509058943.237 [NAL9602](INFO): GPS fix at 20171026T230123: (36.802817, -121.787979)
2017-10-26T23:02:23.273Z,1509058943.273 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:23.295Z,1509058943.295 [Default:CheckIn:Read_GPS] Stopped
2017-10-26T23:02:23.296Z,1509058943.296 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-26T23:02:23.662Z,1509058943.662 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:24.588Z,1509058944.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:24.716Z,1509058944.716 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:25.104Z,1509058945.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:28.684Z,1509058948.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:28.789Z,1509058948.789 [DataOverHttps](INFO): Sending 230 bytes from file Logs/20171026T194410/Courier0008.lzma
2017-10-26T23:02:28.827Z,1509058948.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:29.190Z,1509058949.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:29.560Z,1509058949.560 [DataOverHttps](INFO): Moved sent file to Logs/20171026T194410/Courier0008.lzma.bak
2017-10-26T23:02:29.560Z,1509058949.560 [DataOverHttps](INFO): SBD MOMSN=5171647
2017-10-26T23:02:29.599Z,1509058949.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:30.082Z,1509058950.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:30.395Z,1509058950.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:33.767Z,1509058953.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:33.976Z,1509058953.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:34.288Z,1509058954.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:34.705Z,1509058954.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:35.100Z,1509058955.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:35.489Z,1509058955.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:39.068Z,1509058959.068 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:39.077Z,1509058959.077 [BPC1](ERROR): Failed to receive battery data
2017-10-26T23:02:39.077Z,1509058959.077 [BPC1] Communications Fault, FailCount= 1
2017-10-26T23:02:39.077Z,1509058959.077 [BPC1](ERROR): Communications Fault
2017-10-26T23:02:39.139Z,1509058959.139 [CBIT](ERROR): Communications Fault in component: BPC1
2017-10-26T23:02:39.217Z,1509058959.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:39.558Z,1509058959.558 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20171026T194410/Courier0012.lzma
2017-10-26T23:02:39.597Z,1509058959.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:39.980Z,1509058959.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:40.024Z,1509058960.024 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T23:02:40.024Z,1509058960.024 [BPC1] No Fault, FailCount= 1
2017-10-26T23:02:41.787Z,1509058961.787 [DataOverHttps](INFO): Moved sent file to Logs/20171026T194410/Courier0012.lzma.bak
2017-10-26T23:02:41.787Z,1509058961.787 [DataOverHttps](INFO): SBD MOMSN=5171650
2017-10-26T23:02:41.824Z,1509058961.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:42.496Z,1509058962.496 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:42.734Z,1509058962.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:47.284Z,1509058967.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:47.410Z,1509058967.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:47.804Z,1509058967.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:48.197Z,1509058968.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:48.603Z,1509058968.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:48.995Z,1509058968.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:49.005Z,1509058969.005 [PNI_TCM](ERROR): CRC does not match. Expected:0x26568 got:0x63459
2017-10-26T23:02:49.391Z,1509058969.391 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:49.400Z,1509058969.400 [PNI_TCM](ERROR): CRC does not match. Expected:0x17724 got:0x7596
2017-10-26T23:02:52.965Z,1509058972.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:53.102Z,1509058973.102 [DataOverHttps](INFO): Sending 1917 bytes from file Logs/20171026T194410/Express0009.lzma
2017-10-26T23:02:53.142Z,1509058973.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:53.518Z,1509058973.518 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:53.890Z,1509058973.890 [DataOverHttps](INFO): Moved sent file to Logs/20171026T194410/Express0009.lzma.bak
2017-10-26T23:02:53.890Z,1509058973.890 [DataOverHttps](INFO): SBD MOMSN=5171652
2017-10-26T23:02:53.921Z,1509058973.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:54.500Z,1509058974.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:54.715Z,1509058974.715 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:58.312Z,1509058978.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:58.521Z,1509058978.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:58.825Z,1509058978.825 [NAL9602](INFO): Powering down
2017-10-26T23:02:58.852Z,1509058978.852 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:59.261Z,1509058979.261 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:02:59.644Z,1509058979.644 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:00.043Z,1509058980.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:03.543Z,1509058983.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:03.651Z,1509058983.651 [DataOverHttps](INFO): Sending 25 bytes from file Logs/20171026T194410/Express0013.lzma
2017-10-26T23:03:03.685Z,1509058983.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:04.035Z,1509058984.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:04.403Z,1509058984.403 [DataOverHttps](INFO): Moved sent file to Logs/20171026T194410/Express0013.lzma.bak
2017-10-26T23:03:04.403Z,1509058984.403 [DataOverHttps](INFO): SBD MOMSN=5171684
2017-10-26T23:03:04.444Z,1509058984.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:05.011Z,1509058985.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:05.043Z,1509058985.043 [Default:CheckIn:Read_Iridium] Stopped
2017-10-26T23:03:05.043Z,1509058985.043 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-26T23:03:05.043Z,1509058985.043 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-26T23:03:05.245Z,1509058985.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:08.693Z,1509058988.693 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:08.820Z,1509058988.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:09.203Z,1509058989.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:09.605Z,1509058989.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:09.613Z,1509058989.613 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T23:03:09.614Z,1509058989.614 [BPC1] Data Fault, FailCount= 1
2017-10-26T23:03:09.614Z,1509058989.614 [BPC1](ERROR): Data Fault
2017-10-26T23:03:09.678Z,1509058989.678 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T23:03:09.999Z,1509058989.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:10.395Z,1509058990.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:10.788Z,1509058990.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:10.843Z,1509058990.843 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T23:03:10.843Z,1509058990.843 [BPC1] No Fault, FailCount= 1
2017-10-26T23:03:11.189Z,1509058991.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:11.589Z,1509058991.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:11.990Z,1509058991.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:12.388Z,1509058992.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:12.796Z,1509058992.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:13.200Z,1509058993.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:13.596Z,1509058993.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:14.004Z,1509058994.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:14.384Z,1509058994.384 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:14.790Z,1509058994.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:15.199Z,1509058995.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:15.588Z,1509058995.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:16.003Z,1509058996.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:16.394Z,1509058996.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:16.815Z,1509058996.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:17.198Z,1509058997.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:17.599Z,1509058997.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:18.005Z,1509058998.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:18.407Z,1509058998.407 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:18.796Z,1509058998.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:19.202Z,1509058999.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:19.598Z,1509058999.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:20.030Z,1509059000.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:20.398Z,1509059000.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:20.794Z,1509059000.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:21.195Z,1509059001.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:21.597Z,1509059001.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:21.655Z,1509059001.655 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-10-26T23:03:21.655Z,1509059001.655 [Rowe_600LCM] Communications Fault, FailCount= 2
2017-10-26T23:03:21.655Z,1509059001.655 [Rowe_600LCM](ERROR): Communications Fault
2017-10-26T23:03:21.667Z,1509059001.667 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-10-26T23:03:21.989Z,1509059001.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:22.026Z,1509059002.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-10-26T23:03:22.041Z,1509059002.041 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:03:22.041Z,1509059002.041 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-26T23:03:22.041Z,1509059002.041 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T23:03:22.060Z,1509059002.060 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-10-26T23:03:22.088Z,1509059002.088 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T23:03:22.301Z,1509059002.301 [Rowe_600LCM](INFO): Powering down
2017-10-26T23:03:22.399Z,1509059002.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:22.472Z,1509059002.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-10-26T23:03:22.517Z,1509059002.517 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T23:03:22.517Z,1509059002.517 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-26T23:03:22.803Z,1509059002.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:22.823Z,1509059002.823 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-10-26T23:03:22.828Z,1509059002.828 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T23:03:22.828Z,1509059002.828 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T23:03:22.829Z,1509059002.829 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T23:03:23.191Z,1509059003.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:23.218Z,1509059003.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-10-26T23:03:23.603Z,1509059003.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:23.624Z,1509059003.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-10-26T23:03:23.667Z,1509059003.667 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-10-26T23:03:23.667Z,1509059003.667 [Rowe_600LCM] No Fault, FailCount= 2
2017-10-26T23:03:23.906Z,1509059003.906 [Rowe_600LCM](INFO): Initializing
2017-10-26T23:03:23.907Z,1509059003.907 [Rowe_600LCM](INFO): Checking LCM
2017-10-26T23:03:23.907Z,1509059003.907 [Rowe_600LCM](INFO): LCM OK
2017-10-26T23:03:23.907Z,1509059003.907 [Rowe_600LCM](INFO): Powering up
2017-10-26T23:03:23.993Z,1509059003.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:24.018Z,1509059004.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-10-26T23:03:24.389Z,1509059004.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:24.450Z,1509059004.450 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-10-26T23:03:24.802Z,1509059004.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:24.833Z,1509059004.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-10-26T23:03:25.194Z,1509059005.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:25.255Z,1509059005.255 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-10-26T23:03:25.593Z,1509059005.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:25.608Z,1509059005.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-10-26T23:03:25.000Z,1509059006.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:26.056Z,1509059006.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-10-26T23:03:26.396Z,1509059006.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:26.452Z,1509059006.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-10-26T23:03:26.797Z,1509059006.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:26.812Z,1509059006.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-10-26T23:03:27.198Z,1509059007.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:27.218Z,1509059007.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-10-26T23:03:27.598Z,1509059007.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:27.613Z,1509059007.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-10-26T23:03:28.011Z,1509059008.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:28.057Z,1509059008.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-10-26T23:03:28.155Z,1509059008.155 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-10-26T23:03:28.228Z,1509059008.228 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-10-26T23:03:28.229Z,1509059008.229 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-10-26T23:03:28.230Z,1509059008.230 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-10-26T23:03:28.231Z,1509059008.231 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-10-26T23:03:28.390Z,1509059008.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:28.425Z,1509059008.425 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-10-26T23:03:28.808Z,1509059008.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:29.189Z,1509059009.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:29.606Z,1509059009.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:29.990Z,1509059009.990 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:30.388Z,1509059010.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:30.808Z,1509059010.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:31.188Z,1509059011.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:31.586Z,1509059011.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:31.989Z,1509059011.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:32.405Z,1509059012.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:32.790Z,1509059012.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:33.212Z,1509059013.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:33.587Z,1509059013.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:33.989Z,1509059013.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:34.408Z,1509059014.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:34.789Z,1509059014.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:35.190Z,1509059015.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:35.599Z,1509059015.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:35.989Z,1509059015.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:36.388Z,1509059016.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:36.396Z,1509059016.396 [BPC1](ERROR): Failed to parse message.
2017-10-26T23:03:36.396Z,1509059016.396 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T23:03:36.396Z,1509059016.396 [BPC1] Data Fault, FailCount= 1
2017-10-26T23:03:36.396Z,1509059016.396 [BPC1](ERROR): Data Fault
2017-10-26T23:03:36.460Z,1509059016.460 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T23:03:36.797Z,1509059016.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:37.195Z,1509059017.195 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:37.590Z,1509059017.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:37.647Z,1509059017.647 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T23:03:37.647Z,1509059017.647 [BPC1] No Fault, FailCount= 1
2017-10-26T23:03:37.997Z,1509059017.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:38.399Z,1509059018.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:38.794Z,1509059018.794 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:39.196Z,1509059019.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:39.600Z,1509059019.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:40.036Z,1509059020.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:40.398Z,1509059020.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:40.797Z,1509059020.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:41.197Z,1509059021.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:41.601Z,1509059021.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:41.995Z,1509059021.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:42.398Z,1509059022.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:42.798Z,1509059022.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:43.198Z,1509059023.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:43.597Z,1509059023.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:43.995Z,1509059023.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:44.405Z,1509059024.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:44.796Z,1509059024.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:45.193Z,1509059025.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:45.595Z,1509059025.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:45.995Z,1509059025.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:46.397Z,1509059026.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:46.808Z,1509059026.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:47.205Z,1509059027.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:47.589Z,1509059027.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:48.013Z,1509059028.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:48.408Z,1509059028.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:48.791Z,1509059028.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:49.188Z,1509059029.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:49.588Z,1509059029.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:49.993Z,1509059029.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:50.394Z,1509059030.394 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:50.811Z,1509059030.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:51.199Z,1509059031.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:51.592Z,1509059031.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:51.989Z,1509059031.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:52.389Z,1509059032.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:52.789Z,1509059032.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:53.191Z,1509059033.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:53.598Z,1509059033.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:54.032Z,1509059034.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:54.400Z,1509059034.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:54.796Z,1509059034.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:55.194Z,1509059035.194 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:55.598Z,1509059035.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:55.998Z,1509059035.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:56.399Z,1509059036.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:56.796Z,1509059036.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:57.196Z,1509059037.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:57.606Z,1509059037.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:57.997Z,1509059037.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:58.399Z,1509059038.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:58.790Z,1509059038.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:59.191Z,1509059039.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:59.596Z,1509059039.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:03:59.992Z,1509059039.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:00.393Z,1509059040.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:00.802Z,1509059040.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:01.202Z,1509059041.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:01.596Z,1509059041.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:01.989Z,1509059041.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:02.404Z,1509059042.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:02.798Z,1509059042.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:03.197Z,1509059043.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:03.607Z,1509059043.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:04.007Z,1509059044.007 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:04.387Z,1509059044.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:04.804Z,1509059044.804 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:05.192Z,1509059045.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:05.589Z,1509059045.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:09.063Z,1509059049.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:09.216Z,1509059049.216 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:09.599Z,1509059049.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:09.000Z,1509059050.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:10.393Z,1509059050.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:10.801Z,1509059050.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:11.198Z,1509059051.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:11.598Z,1509059051.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:11.999Z,1509059051.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:12.400Z,1509059052.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:12.791Z,1509059052.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:13.202Z,1509059053.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:13.602Z,1509059053.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:13.000Z,1509059054.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:14.405Z,1509059054.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:14.810Z,1509059054.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:15.190Z,1509059055.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:15.594Z,1509059055.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:15.991Z,1509059055.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:16.388Z,1509059056.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:16.791Z,1509059056.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:17.191Z,1509059057.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:17.596Z,1509059057.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:18.011Z,1509059058.011 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:18.397Z,1509059058.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:18.795Z,1509059058.795 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:19.200Z,1509059059.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:19.597Z,1509059059.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:20.009Z,1509059060.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:20.409Z,1509059060.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:20.812Z,1509059060.812 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:21.207Z,1509059061.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:21.613Z,1509059061.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:22.029Z,1509059062.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:22.393Z,1509059062.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:22.793Z,1509059062.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:22.847Z,1509059062.847 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T23:04:23.188Z,1509059063.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:23.587Z,1509059063.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:23.998Z,1509059063.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:24.399Z,1509059064.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:24.797Z,1509059064.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:25.198Z,1509059065.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:25.606Z,1509059065.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:26.001Z,1509059066.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:26.397Z,1509059066.397 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:26.790Z,1509059066.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:27.199Z,1509059067.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:27.598Z,1509059067.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:27.999Z,1509059067.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:28.386Z,1509059068.386 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:28.797Z,1509059068.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:29.198Z,1509059069.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:29.596Z,1509059069.596 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:30.005Z,1509059070.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:30.405Z,1509059070.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:30.800Z,1509059070.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:31.198Z,1509059071.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:31.598Z,1509059071.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:32.023Z,1509059072.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:32.399Z,1509059072.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:32.799Z,1509059072.799 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:33.207Z,1509059073.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:33.588Z,1509059073.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:34.018Z,1509059074.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:34.390Z,1509059074.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:34.790Z,1509059074.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:35.191Z,1509059075.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:35.604Z,1509059075.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:36.022Z,1509059076.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:36.389Z,1509059076.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:36.798Z,1509059076.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:37.198Z,1509059077.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:37.598Z,1509059077.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:37.999Z,1509059077.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:38.402Z,1509059078.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:38.797Z,1509059078.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:39.201Z,1509059079.201 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:39.598Z,1509059079.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:40.003Z,1509059080.003 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:40.406Z,1509059080.406 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:40.791Z,1509059080.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:41.204Z,1509059081.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:41.599Z,1509059081.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:41.991Z,1509059081.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:42.427Z,1509059082.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:42.791Z,1509059082.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:43.198Z,1509059083.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:43.603Z,1509059083.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:43.998Z,1509059083.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:44.389Z,1509059084.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:44.798Z,1509059084.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:45.188Z,1509059085.188 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:45.591Z,1509059085.591 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:45.994Z,1509059085.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:46.396Z,1509059086.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:46.797Z,1509059086.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:47.196Z,1509059087.196 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:47.599Z,1509059087.599 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:48.010Z,1509059088.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:48.402Z,1509059088.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:48.802Z,1509059088.802 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:49.202Z,1509059089.202 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:49.604Z,1509059089.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:50.006Z,1509059090.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:50.400Z,1509059090.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:50.803Z,1509059090.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:51.200Z,1509059091.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:51.601Z,1509059091.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:52.006Z,1509059092.006 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:52.399Z,1509059092.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:52.798Z,1509059092.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:53.203Z,1509059093.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:53.600Z,1509059093.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:53.988Z,1509059093.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:54.401Z,1509059094.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:54.789Z,1509059094.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:55.190Z,1509059095.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:55.595Z,1509059095.595 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:55.991Z,1509059095.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:56.396Z,1509059096.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:56.793Z,1509059096.793 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:57.198Z,1509059097.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:57.598Z,1509059097.598 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:58.008Z,1509059098.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:58.404Z,1509059098.404 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:58.800Z,1509059098.800 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:59.206Z,1509059099.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:04:59.597Z,1509059099.597 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:00.015Z,1509059100.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:00.405Z,1509059100.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:00.808Z,1509059100.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:01.206Z,1509059101.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:01.609Z,1509059101.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:01.000Z,1509059102.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:02.390Z,1509059102.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:02.791Z,1509059102.791 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:03.191Z,1509059103.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:03.592Z,1509059103.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:04.044Z,1509059104.044 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:04.398Z,1509059104.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:04.789Z,1509059104.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:05.190Z,1509059105.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:05.594Z,1509059105.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:09.192Z,1509059109.192 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:09.326Z,1509059109.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:09.692Z,1509059109.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:10.086Z,1509059110.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:10.515Z,1509059110.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:10.894Z,1509059110.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:11.287Z,1509059111.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:11.685Z,1509059111.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:12.087Z,1509059112.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:12.491Z,1509059112.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:12.886Z,1509059112.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:13.286Z,1509059113.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:13.676Z,1509059113.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:14.075Z,1509059114.075 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:14.476Z,1509059114.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:14.874Z,1509059114.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:15.277Z,1509059115.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:15.678Z,1509059115.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:16.084Z,1509059116.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:16.483Z,1509059116.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:16.883Z,1509059116.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:17.282Z,1509059117.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:17.684Z,1509059117.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:18.091Z,1509059118.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:18.486Z,1509059118.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:18.894Z,1509059118.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:19.275Z,1509059119.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:19.676Z,1509059119.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:20.088Z,1509059120.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:20.477Z,1509059120.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:20.878Z,1509059120.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:21.282Z,1509059121.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:21.683Z,1509059121.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:22.084Z,1509059122.084 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:22.537Z,1509059122.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:22.877Z,1509059122.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:23.277Z,1509059123.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:23.682Z,1509059123.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:24.079Z,1509059124.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:24.101Z,1509059124.101 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-10-26T23:05:24.101Z,1509059124.101 [Rowe_600LCM] Communications Fault, FailCount= 3
2017-10-26T23:05:24.101Z,1509059124.101 [Rowe_600LCM](ERROR): Communications Fault
2017-10-26T23:05:24.106Z,1509059124.106 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.3 s old, using for 20.0 s.
2017-10-26T23:05:24.124Z,1509059124.124 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-10-26T23:05:24.506Z,1509059124.506 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-10-26T23:05:24.545Z,1509059124.545 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:24.636Z,1509059124.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.9 s old, using for 20.0 s.
2017-10-26T23:05:24.741Z,1509059124.741 [Rowe_600LCM](INFO): Powering down
2017-10-26T23:05:24.884Z,1509059124.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:24.945Z,1509059124.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-10-26T23:05:25.285Z,1509059125.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:25.300Z,1509059125.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.5 s old, using for 20.0 s.
2017-10-26T23:05:25.679Z,1509059125.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:25.694Z,1509059125.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.9 s old, using for 20.0 s.
2017-10-26T23:05:26.086Z,1509059126.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:26.102Z,1509059126.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.3 s old, using for 20.0 s.
2017-10-26T23:05:26.137Z,1509059126.137 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-10-26T23:05:26.137Z,1509059126.137 [Rowe_600LCM] No Fault, FailCount= 3
2017-10-26T23:05:26.344Z,1509059126.344 [Rowe_600LCM](INFO): Initializing
2017-10-26T23:05:26.345Z,1509059126.345 [Rowe_600LCM](INFO): Checking LCM
2017-10-26T23:05:26.345Z,1509059126.345 [Rowe_600LCM](INFO): LCM OK
2017-10-26T23:05:26.345Z,1509059126.345 [Rowe_600LCM](INFO): Powering up
2017-10-26T23:05:26.487Z,1509059126.487 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:26.502Z,1509059126.502 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.7 s old, using for 20.0 s.
2017-10-26T23:05:26.884Z,1509059126.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:26.899Z,1509059126.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.1 s old, using for 20.0 s.
2017-10-26T23:05:27.284Z,1509059127.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:27.300Z,1509059127.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.5 s old, using for 20.0 s.
2017-10-26T23:05:27.689Z,1509059127.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:27.704Z,1509059127.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.9 s old, using for 20.0 s.
2017-10-26T23:05:28.077Z,1509059128.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:28.111Z,1509059128.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-10-26T23:05:28.478Z,1509059128.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:28.515Z,1509059128.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-10-26T23:05:28.879Z,1509059128.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:28.906Z,1509059128.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.1 s old, using for 20.0 s.
2017-10-26T23:05:29.280Z,1509059129.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:29.306Z,1509059129.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.5 s old, using for 20.0 s.
2017-10-26T23:05:29.676Z,1509059129.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:29.704Z,1509059129.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.9 s old, using for 20.0 s.
2017-10-26T23:05:30.077Z,1509059130.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:30.109Z,1509059130.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-10-26T23:05:30.447Z,1509059130.447 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-10-26T23:05:30.524Z,1509059130.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:30.568Z,1509059130.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-10-26T23:05:30.631Z,1509059130.631 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-10-26T23:05:30.633Z,1509059130.633 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-10-26T23:05:30.634Z,1509059130.634 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-10-26T23:05:30.635Z,1509059130.635 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-10-26T23:05:30.890Z,1509059130.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:30.931Z,1509059130.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-10-26T23:05:31.286Z,1509059131.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:31.686Z,1509059131.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:32.088Z,1509059132.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:32.489Z,1509059132.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:32.886Z,1509059132.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:33.280Z,1509059133.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:33.681Z,1509059133.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:34.087Z,1509059134.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:34.492Z,1509059134.492 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:34.892Z,1509059134.892 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:35.280Z,1509059135.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:35.690Z,1509059135.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:36.078Z,1509059136.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:36.478Z,1509059136.478 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:36.878Z,1509059136.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:37.279Z,1509059137.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:37.676Z,1509059137.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:38.081Z,1509059138.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:38.477Z,1509059138.477 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:38.875Z,1509059138.875 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:39.283Z,1509059139.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:39.683Z,1509059139.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:40.076Z,1509059140.076 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:40.485Z,1509059140.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:40.889Z,1509059140.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:41.289Z,1509059141.289 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:41.686Z,1509059141.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:42.095Z,1509059142.095 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:42.475Z,1509059142.475 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:42.876Z,1509059142.876 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:43.277Z,1509059143.277 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:43.675Z,1509059143.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:44.086Z,1509059144.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:44.479Z,1509059144.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:44.879Z,1509059144.879 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:45.276Z,1509059145.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:45.694Z,1509059145.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:46.092Z,1509059146.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:46.509Z,1509059146.509 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:46.882Z,1509059146.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:47.280Z,1509059147.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:47.676Z,1509059147.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:48.077Z,1509059148.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:48.508Z,1509059148.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:48.883Z,1509059148.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:49.278Z,1509059149.278 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:49.687Z,1509059149.687 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:50.087Z,1509059150.087 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:50.482Z,1509059150.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:50.889Z,1509059150.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:51.285Z,1509059151.285 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:51.694Z,1509059151.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:52.078Z,1509059152.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:52.476Z,1509059152.476 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:52.880Z,1509059152.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:53.284Z,1509059153.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:53.685Z,1509059153.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:54.090Z,1509059154.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:54.483Z,1509059154.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:54.887Z,1509059154.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:55.284Z,1509059155.284 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:55.676Z,1509059155.676 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:56.077Z,1509059156.077 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:56.498Z,1509059156.498 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:56.878Z,1509059156.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:57.276Z,1509059157.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:57.679Z,1509059157.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:58.080Z,1509059158.080 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:58.485Z,1509059158.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:58.897Z,1509059158.897 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:59.275Z,1509059159.275 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:05:59.678Z,1509059159.678 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:00.079Z,1509059160.079 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:00.515Z,1509059160.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:00.877Z,1509059160.877 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:01.286Z,1509059161.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:01.685Z,1509059161.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:02.092Z,1509059162.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:02.516Z,1509059162.516 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:02.893Z,1509059162.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:03.276Z,1509059163.276 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:03.689Z,1509059163.689 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:04.086Z,1509059164.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:04.494Z,1509059164.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:04.878Z,1509059164.878 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:05.283Z,1509059165.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:05.679Z,1509059165.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:09.055Z,1509059169.055 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:09.252Z,1509059169.252 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:09.614Z,1509059169.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:10.035Z,1509059170.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:10.418Z,1509059170.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:10.825Z,1509059170.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:11.221Z,1509059171.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:11.621Z,1509059171.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:12.021Z,1509059172.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:12.427Z,1509059172.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:12.823Z,1509059172.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:13.211Z,1509059173.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:13.628Z,1509059173.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:14.025Z,1509059174.025 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:14.429Z,1509059174.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:14.809Z,1509059174.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:15.223Z,1509059175.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:15.632Z,1509059175.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:16.028Z,1509059176.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:16.410Z,1509059176.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:16.825Z,1509059176.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:17.213Z,1509059177.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:17.604Z,1509059177.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:18.026Z,1509059178.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:18.421Z,1509059178.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:18.819Z,1509059178.819 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:19.226Z,1509059179.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:19.621Z,1509059179.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:20.024Z,1509059180.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:20.424Z,1509059180.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:20.824Z,1509059180.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:21.222Z,1509059181.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:21.630Z,1509059181.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:22.028Z,1509059182.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:22.413Z,1509059182.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:22.814Z,1509059182.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:22.846Z,1509059182.846 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:06:22.847Z,1509059182.847 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-26T23:06:22.847Z,1509059182.847 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T23:06:22.860Z,1509059182.860 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T23:06:23.222Z,1509059183.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:23.316Z,1509059183.316 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T23:06:23.316Z,1509059183.316 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-26T23:06:23.618Z,1509059183.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:23.650Z,1509059183.650 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T23:06:23.650Z,1509059183.650 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T23:06:23.650Z,1509059183.650 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T23:06:24.037Z,1509059184.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:24.423Z,1509059184.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:24.820Z,1509059184.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:25.220Z,1509059185.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:25.621Z,1509059185.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:26.022Z,1509059186.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:26.427Z,1509059186.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:26.820Z,1509059186.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:27.227Z,1509059187.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:27.619Z,1509059187.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:28.019Z,1509059188.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:28.418Z,1509059188.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:28.811Z,1509059188.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:29.212Z,1509059189.212 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:29.610Z,1509059189.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:30.017Z,1509059190.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:30.410Z,1509059190.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:30.811Z,1509059190.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:31.215Z,1509059191.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:31.620Z,1509059191.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:32.021Z,1509059192.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:32.430Z,1509059192.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:32.810Z,1509059192.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:33.217Z,1509059193.217 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:33.619Z,1509059193.619 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:34.020Z,1509059194.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:34.412Z,1509059194.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:34.821Z,1509059194.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:35.220Z,1509059195.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:35.618Z,1509059195.618 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:36.027Z,1509059196.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:36.418Z,1509059196.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:36.820Z,1509059196.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:37.220Z,1509059197.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:37.622Z,1509059197.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:38.041Z,1509059198.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:38.414Z,1509059198.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:38.824Z,1509059198.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:39.224Z,1509059199.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:39.612Z,1509059199.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:40.037Z,1509059200.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:40.413Z,1509059200.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:40.810Z,1509059200.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:41.210Z,1509059201.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:41.631Z,1509059201.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:42.048Z,1509059202.048 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:42.423Z,1509059202.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:42.824Z,1509059202.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:43.222Z,1509059203.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:43.620Z,1509059203.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:44.019Z,1509059204.019 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:44.419Z,1509059204.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:44.824Z,1509059204.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:45.213Z,1509059205.213 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:45.628Z,1509059205.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:46.047Z,1509059206.047 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:46.411Z,1509059206.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:46.811Z,1509059206.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:47.223Z,1509059207.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:47.612Z,1509059207.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:48.013Z,1509059208.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:48.410Z,1509059208.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:48.810Z,1509059208.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:49.211Z,1509059209.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:49.612Z,1509059209.612 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:50.013Z,1509059210.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:50.417Z,1509059210.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:50.822Z,1509059210.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:51.210Z,1509059211.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:51.616Z,1509059211.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:52.016Z,1509059212.016 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:52.416Z,1509059212.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:52.820Z,1509059212.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:53.221Z,1509059213.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:53.613Z,1509059213.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:54.024Z,1509059214.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:54.424Z,1509059214.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:54.818Z,1509059214.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:55.223Z,1509059215.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:55.625Z,1509059215.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:56.024Z,1509059216.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:56.410Z,1509059216.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:56.813Z,1509059216.813 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:57.211Z,1509059217.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:57.613Z,1509059217.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:58.017Z,1509059218.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:58.415Z,1509059218.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:58.807Z,1509059218.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:59.215Z,1509059219.215 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:06:59.622Z,1509059219.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:00.035Z,1509059220.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:00.416Z,1509059220.416 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:00.814Z,1509059220.814 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:01.206Z,1509059221.206 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:01.617Z,1509059221.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:02.020Z,1509059222.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:02.426Z,1509059222.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:02.817Z,1509059222.817 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:03.221Z,1509059223.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:03.632Z,1509059223.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:04.017Z,1509059224.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:04.420Z,1509059224.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:04.811Z,1509059224.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:05.224Z,1509059225.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:05.613Z,1509059225.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:05.633Z,1509059225.633 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T23:07:05.633Z,1509059225.633 [BPC1] Data Fault, FailCount= 1
2017-10-26T23:07:05.633Z,1509059225.633 [BPC1](ERROR): Data Fault
2017-10-26T23:07:05.659Z,1509059225.659 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T23:07:06.013Z,1509059226.013 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:09.454Z,1509059229.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:09.575Z,1509059229.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:09.631Z,1509059229.631 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T23:07:09.631Z,1509059229.631 [BPC1] No Fault, FailCount= 1
2017-10-26T23:07:09.978Z,1509059229.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:10.366Z,1509059230.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:10.762Z,1509059230.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:11.161Z,1509059231.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:11.563Z,1509059231.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:11.987Z,1509059231.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:12.367Z,1509059232.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:12.773Z,1509059232.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:13.164Z,1509059233.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:13.565Z,1509059233.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:14.004Z,1509059234.004 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:14.362Z,1509059234.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:14.767Z,1509059234.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:15.160Z,1509059235.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:15.549Z,1509059235.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:15.965Z,1509059235.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:16.360Z,1509059236.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:16.756Z,1509059236.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:17.148Z,1509059237.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:17.551Z,1509059237.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:17.952Z,1509059237.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:18.352Z,1509059238.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:18.753Z,1509059238.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:19.154Z,1509059239.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:19.550Z,1509059239.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:19.959Z,1509059239.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:20.351Z,1509059240.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:20.765Z,1509059240.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:21.161Z,1509059241.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:21.553Z,1509059241.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:21.977Z,1509059241.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:22.360Z,1509059242.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:22.759Z,1509059242.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:23.160Z,1509059243.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:23.569Z,1509059243.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:23.970Z,1509059243.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:24.366Z,1509059244.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:24.763Z,1509059244.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:25.163Z,1509059245.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:25.559Z,1509059245.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:25.988Z,1509059245.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:26.361Z,1509059246.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:26.762Z,1509059246.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:27.163Z,1509059247.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:27.559Z,1509059247.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:27.988Z,1509059247.988 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:28.365Z,1509059248.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:28.751Z,1509059248.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:29.154Z,1509059249.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:29.555Z,1509059249.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:29.952Z,1509059249.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:30.351Z,1509059250.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:30.756Z,1509059250.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:31.152Z,1509059251.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:31.561Z,1509059251.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:31.953Z,1509059251.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:32.358Z,1509059252.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:32.750Z,1509059252.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:33.156Z,1509059253.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:33.557Z,1509059253.557 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:33.957Z,1509059253.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:34.362Z,1509059254.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:34.756Z,1509059254.756 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:35.163Z,1509059255.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:35.567Z,1509059255.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:35.978Z,1509059255.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:36.352Z,1509059256.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:36.753Z,1509059256.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:37.153Z,1509059257.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:37.550Z,1509059257.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:37.974Z,1509059257.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:38.363Z,1509059258.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:38.760Z,1509059258.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:39.151Z,1509059259.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:39.554Z,1509059259.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:39.997Z,1509059259.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:40.359Z,1509059260.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:40.760Z,1509059260.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:41.157Z,1509059261.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:41.560Z,1509059261.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:41.970Z,1509059261.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:42.366Z,1509059262.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:42.748Z,1509059262.748 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:43.158Z,1509059263.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:43.559Z,1509059263.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:43.949Z,1509059263.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:44.361Z,1509059264.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:44.761Z,1509059264.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:45.162Z,1509059265.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:45.563Z,1509059265.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:45.959Z,1509059265.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:46.360Z,1509059266.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:46.752Z,1509059266.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:47.153Z,1509059267.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:47.553Z,1509059267.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:47.954Z,1509059267.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:48.351Z,1509059268.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:48.767Z,1509059268.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:49.160Z,1509059269.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:49.553Z,1509059269.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:49.971Z,1509059269.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:50.358Z,1509059270.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:50.750Z,1509059270.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:51.163Z,1509059271.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:51.563Z,1509059271.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:51.983Z,1509059271.983 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:52.369Z,1509059272.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:52.754Z,1509059272.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:53.150Z,1509059273.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:53.548Z,1509059273.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:53.987Z,1509059273.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:54.352Z,1509059274.352 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:54.757Z,1509059274.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:55.157Z,1509059275.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:55.550Z,1509059275.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:55.950Z,1509059275.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:56.357Z,1509059276.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:56.757Z,1509059276.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:57.156Z,1509059277.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:57.558Z,1509059277.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:57.961Z,1509059277.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:58.358Z,1509059278.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:58.764Z,1509059278.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:59.160Z,1509059279.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:59.561Z,1509059279.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:07:59.967Z,1509059279.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:00.362Z,1509059280.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:00.750Z,1509059280.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:01.159Z,1509059281.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:01.551Z,1509059281.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:01.956Z,1509059281.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:02.357Z,1509059282.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:02.782Z,1509059282.782 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:03.159Z,1509059283.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:03.561Z,1509059283.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:03.974Z,1509059283.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:04.358Z,1509059284.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:04.763Z,1509059284.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:05.160Z,1509059285.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:05.562Z,1509059285.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:05.588Z,1509059285.588 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-26T23:08:05.588Z,1509059285.588 [Default:CheckIn:C.Wait] Stopped
2017-10-26T23:08:05.588Z,1509059285.588 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-26T23:08:05.588Z,1509059285.588 [Default:CheckIn:D] Running Loop=1
2017-10-26T23:08:05.975Z,1509059285.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:06.060Z,1509059286.060 [Default:CheckIn:D] Stopped
2017-10-26T23:08:06.064Z,1509059286.064 [Default:CheckIn:E] Running Loop=1
2017-10-26T23:08:06.359Z,1509059286.359 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:06.394Z,1509059286.394 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 11.330642 min 
2017-10-26T23:08:06.395Z,1509059286.395 [Default:CheckIn:E] Stopped
2017-10-26T23:08:06.395Z,1509059286.395 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-26T23:08:06.395Z,1509059286.395 [Default:CheckIn] Stopped
2017-10-26T23:08:06.395Z,1509059286.395 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-26T23:08:06.395Z,1509059286.395 [Default:CheckIn](INFO): Running loop #2
2017-10-26T23:08:06.395Z,1509059286.395 [Default:CheckIn] Running Loop=2
2017-10-26T23:08:06.395Z,1509059286.395 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-26T23:08:06.396Z,1509059286.396 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-26T23:08:09.777Z,1509059289.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:09.924Z,1509059289.924 [NAL9602](INFO): Powering up
2017-10-26T23:08:09.941Z,1509059289.941 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:10.291Z,1509059290.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:10.697Z,1509059290.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:11.082Z,1509059291.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:11.483Z,1509059291.483 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:11.883Z,1509059291.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:12.280Z,1509059292.280 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:12.680Z,1509059292.680 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:13.078Z,1509059293.078 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:13.499Z,1509059293.499 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:13.882Z,1509059293.882 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:14.283Z,1509059294.283 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:14.679Z,1509059294.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:15.101Z,1509059295.101 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:15.481Z,1509059295.481 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:15.881Z,1509059295.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:16.282Z,1509059296.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:16.683Z,1509059296.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:17.082Z,1509059297.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:17.480Z,1509059297.480 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:17.880Z,1509059297.880 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:18.281Z,1509059298.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:18.682Z,1509059298.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:19.086Z,1509059299.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:19.479Z,1509059299.479 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:19.884Z,1509059299.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:20.288Z,1509059300.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:20.692Z,1509059300.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:21.069Z,1509059301.069 [NAL9602](INFO): NAL9602 initialized
2017-10-26T23:08:21.086Z,1509059301.086 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:21.488Z,1509059301.488 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:21.898Z,1509059301.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:22.297Z,1509059302.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:22.694Z,1509059302.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:23.090Z,1509059303.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:23.482Z,1509059303.482 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:23.887Z,1509059303.887 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:24.297Z,1509059304.297 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:24.702Z,1509059304.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:25.090Z,1509059305.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:25.497Z,1509059305.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:25.886Z,1509059305.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:26.312Z,1509059306.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:26.683Z,1509059306.683 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:27.083Z,1509059307.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:27.484Z,1509059307.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:27.890Z,1509059307.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:28.288Z,1509059308.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:28.690Z,1509059308.690 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:29.105Z,1509059309.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:29.494Z,1509059309.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:29.898Z,1509059309.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:30.304Z,1509059310.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:30.694Z,1509059310.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:31.091Z,1509059311.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:31.501Z,1509059311.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:31.884Z,1509059311.884 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:32.288Z,1509059312.288 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:32.684Z,1509059312.684 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:33.081Z,1509059313.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:33.489Z,1509059313.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:33.890Z,1509059313.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:34.309Z,1509059314.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:34.709Z,1509059314.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:35.106Z,1509059315.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:35.494Z,1509059315.494 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:35.894Z,1509059315.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:36.024Z,1509059316.024 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-10-26T23:08:36.024Z,1509059316.024 [Rowe_600LCM] Communications Fault, FailCount= 4
2017-10-26T23:08:36.024Z,1509059316.024 [Rowe_600LCM](ERROR): Communications Fault
2017-10-26T23:08:36.282Z,1509059316.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:36.334Z,1509059316.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-10-26T23:08:36.368Z,1509059316.368 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-10-26T23:08:36.428Z,1509059316.428 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-10-26T23:08:36.536Z,1509059316.536 [Rowe_600LCM](INFO): Powering down
2017-10-26T23:08:36.691Z,1509059316.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:36.721Z,1509059316.721 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-10-26T23:08:37.083Z,1509059317.083 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:37.118Z,1509059317.118 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.2 s old, using for 20.0 s.
2017-10-26T23:08:37.484Z,1509059317.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:37.543Z,1509059317.543 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-10-26T23:08:37.888Z,1509059317.888 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:37.918Z,1509059317.918 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-10-26T23:08:37.937Z,1509059317.937 [CBIT](INFO): Clearing failed state for component Rowe_600LCM
2017-10-26T23:08:37.937Z,1509059317.937 [Rowe_600LCM] No Fault, FailCount= 4
2017-10-26T23:08:38.154Z,1509059318.154 [Rowe_600LCM](INFO): Initializing
2017-10-26T23:08:38.155Z,1509059318.155 [Rowe_600LCM](INFO): Checking LCM
2017-10-26T23:08:38.155Z,1509059318.155 [Rowe_600LCM](INFO): LCM OK
2017-10-26T23:08:38.155Z,1509059318.155 [Rowe_600LCM](INFO): Powering up
2017-10-26T23:08:38.286Z,1509059318.286 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:38.349Z,1509059318.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-10-26T23:08:38.697Z,1509059318.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:38.724Z,1509059318.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.8 s old, using for 20.0 s.
2017-10-26T23:08:39.082Z,1509059319.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:39.127Z,1509059319.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.2 s old, using for 20.0 s.
2017-10-26T23:08:39.493Z,1509059319.493 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:39.547Z,1509059319.547 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-10-26T23:08:39.898Z,1509059319.898 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:39.931Z,1509059319.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-10-26T23:08:40.332Z,1509059320.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:40.352Z,1509059320.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-10-26T23:08:40.701Z,1509059320.701 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:40.723Z,1509059320.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-10-26T23:08:41.096Z,1509059321.096 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:41.120Z,1509059321.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-10-26T23:08:41.484Z,1509059321.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:41.523Z,1509059321.523 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-10-26T23:08:41.883Z,1509059321.883 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:41.931Z,1509059321.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-10-26T23:08:42.287Z,1509059322.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:42.347Z,1509059322.347 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.4 s old, using for 20.0 s.
2017-10-26T23:08:42.504Z,1509059322.504 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of Rowe LCM interface
2017-10-26T23:08:42.696Z,1509059322.696 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:42.713Z,1509059322.713 [Rowe_600LCM](INFO): Started Rowe LCM interface with command:nohup ./lrauv-framework/onboard/bin/roweadcp -ldir /mnt/mmc/LRAUV/Logs/latest/ -dev /dev/ttyB4 -b 38400 >& /dev/null &
2017-10-26T23:08:42.714Z,1509059322.714 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.bottom_track
2017-10-26T23:08:42.716Z,1509059322.716 [Rowe_600LCM](INFO): LCM subscribed to channel:Rowe_600LCM.adcp_dvl.vehicle_water_velocity
2017-10-26T23:08:42.716Z,1509059322.716 [Rowe_600LCM](INFO): LCM subscribed to channel:rowe_dvl.rowe
2017-10-26T23:08:42.790Z,1509059322.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.8 s old, using for 20.0 s.
2017-10-26T23:08:43.085Z,1509059323.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:43.484Z,1509059323.484 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:43.893Z,1509059323.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:44.301Z,1509059324.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:44.703Z,1509059324.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:45.102Z,1509059325.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:45.500Z,1509059325.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:45.902Z,1509059325.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:46.281Z,1509059326.281 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:46.682Z,1509059326.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:47.106Z,1509059327.106 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:47.486Z,1509059327.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:47.894Z,1509059327.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:48.291Z,1509059328.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:48.681Z,1509059328.681 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:49.081Z,1509059329.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:49.489Z,1509059329.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:49.931Z,1509059329.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:50.302Z,1509059330.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:50.703Z,1509059330.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:51.103Z,1509059331.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:51.485Z,1509059331.485 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:51.891Z,1509059331.891 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:52.294Z,1509059332.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:52.692Z,1509059332.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:53.089Z,1509059333.089 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:53.497Z,1509059333.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:53.889Z,1509059333.889 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:54.295Z,1509059334.295 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:54.682Z,1509059334.682 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:55.103Z,1509059335.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:55.507Z,1509059335.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:55.906Z,1509059335.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:56.304Z,1509059336.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:56.679Z,1509059336.679 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:57.082Z,1509059337.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:57.486Z,1509059337.486 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:57.881Z,1509059337.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:58.287Z,1509059338.287 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:58.685Z,1509059338.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:59.081Z,1509059339.081 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:59.489Z,1509059339.489 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:08:59.886Z,1509059339.886 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:00.293Z,1509059340.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:00.694Z,1509059340.694 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:01.111Z,1509059341.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:01.511Z,1509059341.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:01.894Z,1509059341.894 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:02.294Z,1509059342.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:02.685Z,1509059342.685 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:03.085Z,1509059343.085 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:03.511Z,1509059343.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:03.885Z,1509059343.885 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:04.282Z,1509059344.282 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:04.686Z,1509059344.686 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:05.088Z,1509059345.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:05.526Z,1509059345.526 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:05.903Z,1509059345.903 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:06.310Z,1509059346.310 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:06.704Z,1509059346.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:10.127Z,1509059350.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:10.259Z,1509059350.259 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:10.617Z,1509059350.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:11.067Z,1509059351.067 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:11.428Z,1509059351.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:11.820Z,1509059351.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:12.219Z,1509059352.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:12.625Z,1509059352.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:13.071Z,1509059353.071 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:13.409Z,1509059353.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:13.808Z,1509059353.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:14.234Z,1509059354.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:14.638Z,1509059354.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:15.082Z,1509059355.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:15.409Z,1509059355.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:15.856Z,1509059355.856 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:16.234Z,1509059356.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:16.675Z,1509059356.675 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:17.028Z,1509059357.028 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:17.422Z,1509059357.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:17.836Z,1509059357.836 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:18.220Z,1509059358.220 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:18.604Z,1509059358.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:19.027Z,1509059359.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:19.412Z,1509059359.412 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:19.818Z,1509059359.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:20.211Z,1509059360.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:20.623Z,1509059360.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:21.042Z,1509059361.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:21.415Z,1509059361.415 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:21.827Z,1509059361.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:22.238Z,1509059362.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:22.634Z,1509059362.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:23.033Z,1509059363.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:23.411Z,1509059363.411 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:23.810Z,1509059363.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:23.874Z,1509059363.874 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:09:23.874Z,1509059363.874 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2017-10-26T23:09:23.874Z,1509059363.874 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T23:09:23.920Z,1509059363.920 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T23:09:24.214Z,1509059364.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:24.306Z,1509059364.306 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T23:09:24.306Z,1509059364.306 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2017-10-26T23:09:24.601Z,1509059364.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:24.621Z,1509059364.621 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T23:09:24.622Z,1509059364.622 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T23:09:24.630Z,1509059364.630 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T23:09:25.012Z,1509059365.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:25.399Z,1509059365.399 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:25.801Z,1509059365.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:26.211Z,1509059366.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:26.620Z,1509059366.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:27.012Z,1509059367.012 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:27.430Z,1509059367.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:27.854Z,1509059367.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:28.204Z,1509059368.204 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:28.643Z,1509059368.643 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:29.046Z,1509059369.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:29.445Z,1509059369.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:29.862Z,1509059369.862 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:30.245Z,1509059370.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:30.623Z,1509059370.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:31.017Z,1509059371.017 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:31.434Z,1509059371.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:31.837Z,1509059371.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:32.225Z,1509059372.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:32.647Z,1509059372.647 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:33.030Z,1509059373.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:33.427Z,1509059373.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:33.835Z,1509059373.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:34.225Z,1509059374.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:34.617Z,1509059374.617 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:35.005Z,1509059375.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:35.425Z,1509059375.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:35.811Z,1509059375.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:36.229Z,1509059376.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:36.623Z,1509059376.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:37.082Z,1509059377.082 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:37.446Z,1509059377.446 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:37.840Z,1509059377.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:38.227Z,1509059378.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:38.256Z,1509059378.256 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T23:09:38.256Z,1509059378.256 [BPC1] Data Fault, FailCount= 1
2017-10-26T23:09:38.256Z,1509059378.256 [BPC1](ERROR): Data Fault
2017-10-26T23:09:38.336Z,1509059378.336 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T23:09:38.620Z,1509059378.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:39.018Z,1509059379.018 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:39.431Z,1509059379.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:39.535Z,1509059379.535 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T23:09:39.535Z,1509059379.535 [BPC1] No Fault, FailCount= 1
2017-10-26T23:09:39.807Z,1509059379.807 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:40.199Z,1509059380.199 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:40.614Z,1509059380.614 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:41.063Z,1509059381.063 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:41.429Z,1509059381.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:41.830Z,1509059381.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:42.231Z,1509059382.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:42.634Z,1509059382.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:43.064Z,1509059383.064 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:43.402Z,1509059383.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:43.825Z,1509059383.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:44.227Z,1509059384.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:44.653Z,1509059384.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:45.015Z,1509059385.015 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:45.402Z,1509059385.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:45.833Z,1509059385.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:46.207Z,1509059386.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:46.605Z,1509059386.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:47.042Z,1509059387.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:47.417Z,1509059387.417 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:47.838Z,1509059387.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:48.226Z,1509059388.226 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:48.601Z,1509059388.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:49.005Z,1509059389.005 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:49.408Z,1509059389.408 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:49.801Z,1509059389.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:49.822Z,1509059389.822 [PNI_TCM](ERROR): CRC does not match. Expected:0x21292 got:0x1857
2017-10-26T23:09:50.214Z,1509059390.214 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:50.600Z,1509059390.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:51.008Z,1509059391.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:51.426Z,1509059391.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:51.815Z,1509059391.815 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:52.230Z,1509059392.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:52.607Z,1509059392.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:53.021Z,1509059393.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:53.027Z,1509059393.027 [PNI_TCM](ERROR): CRC does not match. Expected:0x55334 got:0x7490
2017-10-26T23:09:53.413Z,1509059393.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:53.805Z,1509059393.805 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:54.210Z,1509059394.210 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:54.611Z,1509059394.611 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:55.010Z,1509059395.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:55.413Z,1509059395.413 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:55.811Z,1509059395.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:56.205Z,1509059396.205 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:56.607Z,1509059396.607 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:57.034Z,1509059397.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:57.427Z,1509059397.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:57.827Z,1509059397.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:58.209Z,1509059398.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:58.627Z,1509059398.627 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:59.002Z,1509059399.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:59.401Z,1509059399.401 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:59.446Z,1509059399.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.409835 seconds old.
2017-10-26T23:09:59.457Z,1509059399.457 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.418653 seconds old.
2017-10-26T23:09:59.459Z,1509059399.459 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.419046 seconds old.
2017-10-26T23:09:59.810Z,1509059399.810 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:09:59.840Z,1509059399.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 0.803544 seconds old.
2017-10-26T23:09:59.847Z,1509059399.847 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 0.808256 seconds old.
2017-10-26T23:09:59.849Z,1509059399.849 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 0.808755 seconds old.
2017-10-26T23:10:00.209Z,1509059400.209 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:00.223Z,1509059400.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.186241 seconds old.
2017-10-26T23:10:00.225Z,1509059400.225 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.186641 seconds old.
2017-10-26T23:10:00.227Z,1509059400.227 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.187040 seconds old.
2017-10-26T23:10:00.604Z,1509059400.604 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:00.628Z,1509059400.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.592169 seconds old.
2017-10-26T23:10:00.635Z,1509059400.635 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.596881 seconds old.
2017-10-26T23:10:00.638Z,1509059400.638 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.597174 seconds old.
2017-10-26T23:10:01.008Z,1509059401.008 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:01.022Z,1509059401.022 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 1.985878 seconds old.
2017-10-26T23:10:01.025Z,1509059401.025 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 1.986284 seconds old.
2017-10-26T23:10:01.027Z,1509059401.027 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 1.986783 seconds old.
2017-10-26T23:10:01.410Z,1509059401.410 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:01.426Z,1509059401.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.389206 seconds old.
2017-10-26T23:10:01.456Z,1509059401.456 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.417856 seconds old.
2017-10-26T23:10:01.473Z,1509059401.473 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.432073 seconds old.
2017-10-26T23:10:01.806Z,1509059401.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:01.820Z,1509059401.820 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 2.784221 seconds old.
2017-10-26T23:10:01.823Z,1509059401.823 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 2.784621 seconds old.
2017-10-26T23:10:01.826Z,1509059401.826 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 2.785121 seconds old.
2017-10-26T23:10:02.198Z,1509059402.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:02.226Z,1509059402.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Most recent orientation data is 3.189649 seconds old.
2017-10-26T23:10:02.233Z,1509059402.233 [DeadReckonUsingSpeedCalculator](DEBUG): Most recent orientation data is 3.190049 seconds old.
2017-10-26T23:10:02.235Z,1509059402.235 [DeadReckonWithRespectToSeafloor](DEBUG): Most recent orientation data is 3.194755 seconds old.
2017-10-26T23:10:02.622Z,1509059402.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:03.020Z,1509059403.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:03.420Z,1509059403.420 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:03.808Z,1509059403.808 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:04.198Z,1509059404.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:04.605Z,1509059404.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:04.611Z,1509059404.611 [PNI_TCM](ERROR): CRC does not match. Expected:0x16585 got:0x46464
2017-10-26T23:10:05.001Z,1509059405.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:05.405Z,1509059405.405 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:05.811Z,1509059405.811 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:05.817Z,1509059405.817 [PNI_TCM](ERROR): CRC does not match. Expected:0x40096 got:0x27611
2017-10-26T23:10:06.211Z,1509059406.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:06.609Z,1509059406.609 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:07.014Z,1509059407.014 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:10.364Z,1509059410.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:10.579Z,1509059410.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:10.923Z,1509059410.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:11.332Z,1509059411.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:11.705Z,1509059411.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:12.120Z,1509059412.120 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:12.521Z,1509059412.521 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:12.907Z,1509059412.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:13.308Z,1509059413.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:13.723Z,1509059413.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:14.102Z,1509059414.102 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:14.506Z,1509059414.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:14.920Z,1509059414.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:15.329Z,1509059415.329 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:15.723Z,1509059415.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:16.129Z,1509059416.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:16.525Z,1509059416.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:16.901Z,1509059416.901 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:17.302Z,1509059417.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:17.707Z,1509059417.707 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:18.112Z,1509059418.112 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:18.512Z,1509059418.512 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:18.921Z,1509059418.921 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:19.301Z,1509059419.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:19.705Z,1509059419.705 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:20.108Z,1509059420.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:20.525Z,1509059420.525 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:20.952Z,1509059420.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:21.326Z,1509059421.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:21.733Z,1509059421.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:22.129Z,1509059422.129 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:22.502Z,1509059422.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:22.967Z,1509059422.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:23.304Z,1509059423.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:23.710Z,1509059423.710 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:24.116Z,1509059424.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:24.511Z,1509059424.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:24.906Z,1509059424.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:25.307Z,1509059425.307 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:25.726Z,1509059425.726 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:26.124Z,1509059426.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:26.524Z,1509059426.524 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:26.926Z,1509059426.926 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:27.302Z,1509059427.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:27.702Z,1509059427.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:28.107Z,1509059428.107 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:28.508Z,1509059428.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:28.924Z,1509059428.924 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:29.305Z,1509059429.305 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:29.702Z,1509059429.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:30.122Z,1509059430.122 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:30.503Z,1509059430.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:30.922Z,1509059430.922 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:31.327Z,1509059431.327 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:31.727Z,1509059431.727 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:32.124Z,1509059432.124 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:32.501Z,1509059432.501 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:32.967Z,1509059432.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:33.301Z,1509059433.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:33.712Z,1509059433.712 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:34.116Z,1509059434.116 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:34.513Z,1509059434.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:34.956Z,1509059434.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:35.316Z,1509059435.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:35.711Z,1509059435.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:36.123Z,1509059436.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:36.523Z,1509059436.523 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:36.967Z,1509059436.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:37.318Z,1509059437.318 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:37.702Z,1509059437.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:38.103Z,1509059438.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:38.503Z,1509059438.503 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:38.621Z,1509059438.621 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time.
2017-10-26T23:10:38.621Z,1509059438.621 [Rowe_600LCM] Communications Fault, FailCount= 5
2017-10-26T23:10:38.621Z,1509059438.621 [Rowe_600LCM](ERROR): Communications Fault
2017-10-26T23:10:38.904Z,1509059438.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:38.936Z,1509059438.936 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.4 s old, using for 20.0 s.
2017-10-26T23:10:39.026Z,1509059439.026 [Rowe_600LCM](INFO): Stopping potential previous instance(s) of roweadcp LCM interface
2017-10-26T23:10:39.061Z,1509059439.061 [CBIT](ERROR): Communications Fault in component: Rowe_600LCM
2017-10-26T23:10:39.067Z,1509059439.067 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM
2017-10-26T23:10:39.263Z,1509059439.263 [Rowe_600LCM](INFO): Powering down
2017-10-26T23:10:39.339Z,1509059439.339 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:39.356Z,1509059439.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 0.8 s old, using for 20.0 s.
2017-10-26T23:10:39.709Z,1509059439.709 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:39.826Z,1509059439.826 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.3 s old, using for 20.0 s.
2017-10-26T23:10:40.111Z,1509059440.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:40.150Z,1509059440.150 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 1.6 s old, using for 20.0 s.
2017-10-26T23:10:40.506Z,1509059440.506 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:40.558Z,1509059440.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.0 s old, using for 20.0 s.
2017-10-26T23:10:40.930Z,1509059440.930 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:40.958Z,1509059440.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.4 s old, using for 20.0 s.
2017-10-26T23:10:41.320Z,1509059441.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:41.402Z,1509059441.402 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 2.9 s old, using for 20.0 s.
2017-10-26T23:10:41.731Z,1509059441.731 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:41.794Z,1509059441.794 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.3 s old, using for 20.0 s.
2017-10-26T23:10:42.130Z,1509059442.130 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:42.149Z,1509059442.149 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 3.6 s old, using for 20.0 s.
2017-10-26T23:10:42.534Z,1509059442.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:42.585Z,1509059442.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.0 s old, using for 20.0 s.
2017-10-26T23:10:42.907Z,1509059442.907 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:42.923Z,1509059442.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.4 s old, using for 20.0 s.
2017-10-26T23:10:43.317Z,1509059443.317 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:43.345Z,1509059443.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 4.8 s old, using for 20.0 s.
2017-10-26T23:10:43.711Z,1509059443.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:43.744Z,1509059443.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.2 s old, using for 20.0 s.
2017-10-26T23:10:44.117Z,1509059444.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:44.157Z,1509059444.157 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 5.6 s old, using for 20.0 s.
2017-10-26T23:10:44.540Z,1509059444.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:44.573Z,1509059444.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.0 s old, using for 20.0 s.
2017-10-26T23:10:44.964Z,1509059444.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:45.014Z,1509059445.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.5 s old, using for 20.0 s.
2017-10-26T23:10:45.322Z,1509059445.322 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:45.414Z,1509059445.414 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 6.9 s old, using for 20.0 s.
2017-10-26T23:10:45.728Z,1509059445.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:45.744Z,1509059445.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.2 s old, using for 20.0 s.
2017-10-26T23:10:46.123Z,1509059446.123 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:46.141Z,1509059446.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 7.6 s old, using for 20.0 s.
2017-10-26T23:10:46.562Z,1509059446.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:46.601Z,1509059446.601 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.1 s old, using for 20.0 s.
2017-10-26T23:10:46.923Z,1509059446.923 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:46.958Z,1509059446.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.4 s old, using for 20.0 s.
2017-10-26T23:10:47.342Z,1509059447.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:47.367Z,1509059447.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 8.8 s old, using for 20.0 s.
2017-10-26T23:10:47.732Z,1509059447.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:47.785Z,1509059447.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.3 s old, using for 20.0 s.
2017-10-26T23:10:48.125Z,1509059448.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:48.151Z,1509059448.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 9.6 s old, using for 20.0 s.
2017-10-26T23:10:48.554Z,1509059448.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:48.587Z,1509059448.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.1 s old, using for 20.0 s.
2017-10-26T23:10:48.906Z,1509059448.906 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:48.941Z,1509059448.941 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.4 s old, using for 20.0 s.
2017-10-26T23:10:49.315Z,1509059449.315 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:49.352Z,1509059449.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 10.8 s old, using for 20.0 s.
2017-10-26T23:10:49.713Z,1509059449.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:49.753Z,1509059449.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.2 s old, using for 20.0 s.
2017-10-26T23:10:50.109Z,1509059450.109 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:50.125Z,1509059450.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 11.6 s old, using for 20.0 s.
2017-10-26T23:10:50.511Z,1509059450.511 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:50.527Z,1509059450.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.0 s old, using for 20.0 s.
2017-10-26T23:10:50.917Z,1509059450.917 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:50.933Z,1509059450.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.4 s old, using for 20.0 s.
2017-10-26T23:10:51.320Z,1509059451.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:51.346Z,1509059451.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 12.8 s old, using for 20.0 s.
2017-10-26T23:10:51.733Z,1509059451.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:51.793Z,1509059451.793 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.3 s old, using for 20.0 s.
2017-10-26T23:10:52.136Z,1509059452.136 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:52.184Z,1509059452.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 13.6 s old, using for 20.0 s.
2017-10-26T23:10:52.522Z,1509059452.522 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:52.565Z,1509059452.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.0 s old, using for 20.0 s.
2017-10-26T23:10:52.942Z,1509059452.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:52.974Z,1509059452.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.4 s old, using for 20.0 s.
2017-10-26T23:10:53.316Z,1509059453.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:53.346Z,1509059453.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 14.8 s old, using for 20.0 s.
2017-10-26T23:10:53.736Z,1509059453.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:53.760Z,1509059453.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.2 s old, using for 20.0 s.
2017-10-26T23:10:54.110Z,1509059454.110 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:54.252Z,1509059454.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 15.7 s old, using for 20.0 s.
2017-10-26T23:10:54.504Z,1509059454.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:54.554Z,1509059454.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.0 s old, using for 20.0 s.
2017-10-26T23:10:54.918Z,1509059454.918 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:55.000Z,1509059455.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.5 s old, using for 20.0 s.
2017-10-26T23:10:55.326Z,1509059455.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:55.350Z,1509059455.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 16.8 s old, using for 20.0 s.
2017-10-26T23:10:55.723Z,1509059455.723 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:55.777Z,1509059455.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.2 s old, using for 20.0 s.
2017-10-26T23:10:56.108Z,1509059456.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:56.166Z,1509059456.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 17.6 s old, using for 20.0 s.
2017-10-26T23:10:56.514Z,1509059456.514 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:56.536Z,1509059456.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.0 s old, using for 20.0 s.
2017-10-26T23:10:56.931Z,1509059456.931 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:56.946Z,1509059456.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.4 s old, using for 20.0 s.
2017-10-26T23:10:57.326Z,1509059457.326 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:57.372Z,1509059457.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 18.8 s old, using for 20.0 s.
2017-10-26T23:10:57.736Z,1509059457.736 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:57.764Z,1509059457.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.2 s old, using for 20.0 s.
2017-10-26T23:10:58.127Z,1509059458.127 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:58.162Z,1509059458.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 19.6 s old, using for 20.0 s.
2017-10-26T23:10:58.507Z,1509059458.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:58.536Z,1509059458.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Bottom track data is 20.0 s old, using for 20.0 s.
2017-10-26T23:10:58.538Z,1509059458.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Will not write estimated position: allowance for input measurements to start up has expired, velocity or orientation is invalid, and horizontal path length since last fix is nonzero.
2017-10-26T23:10:58.538Z,1509059458.538 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2017-10-26T23:10:58.538Z,1509059458.538 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2017-10-26T23:10:58.617Z,1509059458.617 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2017-10-26T23:10:58.904Z,1509059458.904 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:58.964Z,1509059458.964 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2017-10-26T23:10:58.965Z,1509059458.965 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2017-10-26T23:10:59.304Z,1509059459.304 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:10:59.318Z,1509059459.318 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2017-10-26T23:10:59.319Z,1509059459.319 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T23:10:59.319Z,1509059459.319 [DeadReckonUsingMultipleVelocitySources](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T23:10:59.714Z,1509059459.714 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:00.111Z,1509059460.111 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:00.510Z,1509059460.510 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:00.913Z,1509059460.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:01.316Z,1509059461.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:01.706Z,1509059461.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:02.115Z,1509059462.115 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:02.541Z,1509059462.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:02.920Z,1509059462.920 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:03.342Z,1509059463.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:03.706Z,1509059463.706 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:04.113Z,1509059464.113 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:04.515Z,1509059464.515 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:04.913Z,1509059464.913 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:05.313Z,1509059465.313 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:05.711Z,1509059465.711 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:06.125Z,1509059466.125 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:06.533Z,1509059466.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:06.925Z,1509059466.925 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:07.332Z,1509059467.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:07.728Z,1509059467.728 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:08.135Z,1509059468.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:12.022Z,1509059472.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:12.211Z,1509059472.211 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:12.613Z,1509059472.613 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:12.997Z,1509059472.997 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:13.393Z,1509059473.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:13.789Z,1509059473.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:14.189Z,1509059474.189 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:14.592Z,1509059474.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:14.993Z,1509059474.993 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:15.387Z,1509059475.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:15.784Z,1509059475.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:16.190Z,1509059476.190 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:16.603Z,1509059476.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:16.982Z,1509059476.982 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:17.421Z,1509059477.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:17.809Z,1509059477.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:18.200Z,1509059478.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:18.603Z,1509059478.603 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:18.987Z,1509059478.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:19.377Z,1509059479.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:19.798Z,1509059479.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:20.193Z,1509059480.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:20.601Z,1509059480.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:21.010Z,1509059481.010 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:21.393Z,1509059481.393 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:21.779Z,1509059481.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:22.179Z,1509059482.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:22.610Z,1509059482.610 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:22.999Z,1509059482.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:23.390Z,1509059483.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:23.792Z,1509059483.792 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:24.200Z,1509059484.200 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:24.592Z,1509059484.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:24.998Z,1509059484.998 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:25.387Z,1509059485.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:25.406Z,1509059485.406 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T23:11:25.406Z,1509059485.406 [BPC1] Data Fault, FailCount= 1
2017-10-26T23:11:25.406Z,1509059485.406 [BPC1](ERROR): Data Fault
2017-10-26T23:11:25.471Z,1509059485.471 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T23:11:25.776Z,1509059485.776 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:26.197Z,1509059486.197 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:26.578Z,1509059486.578 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:26.624Z,1509059486.624 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T23:11:26.624Z,1509059486.624 [BPC1] No Fault, FailCount= 1
2017-10-26T23:11:26.978Z,1509059486.978 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:27.409Z,1509059487.409 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:27.801Z,1509059487.801 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:28.181Z,1509059488.181 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:28.581Z,1509059488.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:28.981Z,1509059488.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:29.403Z,1509059489.403 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:29.784Z,1509059489.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:30.180Z,1509059490.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:30.585Z,1509059490.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:30.976Z,1509059490.976 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:31.390Z,1509059491.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:31.803Z,1509059491.803 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:32.186Z,1509059492.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:32.592Z,1509059492.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:32.980Z,1509059492.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:33.377Z,1509059493.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:33.789Z,1509059493.789 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:34.191Z,1509059494.191 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:34.588Z,1509059494.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:34.979Z,1509059494.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:35.383Z,1509059495.383 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:35.780Z,1509059495.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:36.187Z,1509059496.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:36.600Z,1509059496.600 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:37.001Z,1509059497.001 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:37.392Z,1509059497.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:37.788Z,1509059497.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:38.187Z,1509059498.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:38.592Z,1509059498.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:38.986Z,1509059498.986 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:39.389Z,1509059499.389 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:39.781Z,1509059499.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:40.198Z,1509059500.198 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:40.602Z,1509059500.602 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:41.002Z,1509059501.002 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:41.400Z,1509059501.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:41.781Z,1509059501.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:42.182Z,1509059502.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:42.579Z,1509059502.579 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:42.979Z,1509059502.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:43.380Z,1509059503.380 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:43.780Z,1509059503.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:44.177Z,1509059504.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:44.582Z,1509059504.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:44.989Z,1509059504.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:45.390Z,1509059505.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:45.780Z,1509059505.780 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:46.180Z,1509059506.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:46.581Z,1509059506.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:46.977Z,1509059506.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:47.378Z,1509059507.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:47.783Z,1509059507.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:48.183Z,1509059508.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:48.605Z,1509059508.605 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:48.989Z,1509059508.989 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:49.392Z,1509059509.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:49.806Z,1509059509.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:49.813Z,1509059509.813 [PNI_TCM](ERROR): CRC does not match. Expected:0x19082 got:0x54348
2017-10-26T23:11:50.179Z,1509059510.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:50.584Z,1509059510.584 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:50.987Z,1509059510.987 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:51.385Z,1509059511.385 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:51.785Z,1509059511.785 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:52.183Z,1509059512.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:52.585Z,1509059512.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:52.991Z,1509059512.991 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:53.398Z,1509059513.398 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:53.806Z,1509059513.806 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:54.203Z,1509059514.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:54.594Z,1509059514.594 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:54.601Z,1509059514.601 [PNI_TCM](ERROR): CRC does not match. Expected:0x35720 got:0x1346
2017-10-26T23:11:54.975Z,1509059514.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:55.379Z,1509059515.379 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:55.787Z,1509059515.787 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:56.187Z,1509059516.187 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:56.590Z,1509059516.590 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:56.992Z,1509059516.992 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:57.396Z,1509059517.396 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:57.796Z,1509059517.796 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:58.203Z,1509059518.203 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:58.601Z,1509059518.601 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:58.996Z,1509059518.996 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:59.381Z,1509059519.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:11:59.777Z,1509059519.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:00.207Z,1509059520.207 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:00.581Z,1509059520.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:00.994Z,1509059520.994 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:01.381Z,1509059521.381 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:01.784Z,1509059521.784 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:02.179Z,1509059522.179 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:02.592Z,1509059522.592 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:02.999Z,1509059522.999 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:03.395Z,1509059523.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:03.798Z,1509059523.798 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:04.193Z,1509059524.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:04.587Z,1509059524.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:04.995Z,1509059524.995 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:05.392Z,1509059525.392 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:05.790Z,1509059525.790 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:06.186Z,1509059526.186 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:06.585Z,1509059526.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:06.977Z,1509059526.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:07.377Z,1509059527.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:10.672Z,1509059530.672 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:10.881Z,1509059530.881 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:11.255Z,1509059531.255 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:11.660Z,1509059531.660 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:12.036Z,1509059532.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:12.433Z,1509059532.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:12.833Z,1509059532.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:13.234Z,1509059533.234 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:13.635Z,1509059533.635 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:14.035Z,1509059534.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:14.432Z,1509059534.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:14.832Z,1509059534.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:15.233Z,1509059535.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:15.658Z,1509059535.658 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:16.045Z,1509059536.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:16.460Z,1509059536.460 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:16.842Z,1509059536.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:17.244Z,1509059537.244 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:17.633Z,1509059537.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:18.034Z,1509059538.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:18.442Z,1509059538.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:18.835Z,1509059538.835 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:19.236Z,1509059539.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:19.636Z,1509059539.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:20.033Z,1509059540.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:20.433Z,1509059540.433 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:20.848Z,1509059540.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:21.245Z,1509059541.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:21.654Z,1509059541.654 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:22.050Z,1509059542.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:22.441Z,1509059542.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:22.841Z,1509059542.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:23.246Z,1509059543.246 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:23.645Z,1509059543.645 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:24.039Z,1509059544.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:24.454Z,1509059544.454 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:24.833Z,1509059544.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:24.898Z,1509059544.898 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:12:24.898Z,1509059544.898 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 4
2017-10-26T23:12:24.898Z,1509059544.898 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T23:12:24.923Z,1509059544.923 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T23:12:25.233Z,1509059545.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:25.309Z,1509059545.309 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T23:12:25.309Z,1509059545.309 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 4
2017-10-26T23:12:25.637Z,1509059545.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:25.697Z,1509059545.697 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T23:12:25.697Z,1509059545.697 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T23:12:25.697Z,1509059545.697 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T23:12:26.066Z,1509059546.066 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:26.445Z,1509059546.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:26.865Z,1509059546.865 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:27.242Z,1509059547.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:27.640Z,1509059547.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:28.041Z,1509059548.041 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:28.439Z,1509059548.439 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:28.842Z,1509059548.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:29.240Z,1509059549.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:29.637Z,1509059549.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:30.040Z,1509059550.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:30.445Z,1509059550.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:30.844Z,1509059550.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:31.248Z,1509059551.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:31.653Z,1509059551.653 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:32.045Z,1509059552.045 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:32.450Z,1509059552.450 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:32.857Z,1509059552.857 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:33.233Z,1509059553.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:33.634Z,1509059553.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:34.034Z,1509059554.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:34.435Z,1509059554.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:34.832Z,1509059554.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:35.240Z,1509059555.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:35.638Z,1509059555.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:36.037Z,1509059556.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:36.444Z,1509059556.444 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:36.847Z,1509059556.847 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:37.247Z,1509059557.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:37.639Z,1509059557.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:38.042Z,1509059558.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:38.442Z,1509059558.442 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:38.850Z,1509059558.850 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:39.248Z,1509059559.248 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:39.648Z,1509059559.648 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:40.050Z,1509059560.050 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:40.434Z,1509059560.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:40.855Z,1509059560.855 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:41.291Z,1509059561.291 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:41.636Z,1509059561.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:42.037Z,1509059562.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:42.449Z,1509059562.449 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:42.842Z,1509059562.842 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:43.247Z,1509059563.247 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:43.671Z,1509059563.671 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:44.054Z,1509059564.054 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:44.435Z,1509059564.435 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:44.846Z,1509059564.846 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:45.232Z,1509059565.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:45.630Z,1509059565.630 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:46.033Z,1509059566.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:46.438Z,1509059566.438 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:46.834Z,1509059566.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:47.241Z,1509059567.241 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:47.639Z,1509059567.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:48.051Z,1509059568.051 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:48.445Z,1509059568.445 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:48.837Z,1509059568.837 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:49.242Z,1509059569.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:49.640Z,1509059569.640 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:50.043Z,1509059570.043 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:50.440Z,1509059570.440 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:50.840Z,1509059570.840 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:51.242Z,1509059571.242 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:51.646Z,1509059571.646 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:52.042Z,1509059572.042 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:52.453Z,1509059572.453 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:52.832Z,1509059572.832 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:53.236Z,1509059573.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:53.650Z,1509059573.650 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:54.033Z,1509059574.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:54.434Z,1509059574.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:54.839Z,1509059574.839 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:55.233Z,1509059575.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:55.636Z,1509059575.636 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:56.037Z,1509059576.037 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:56.434Z,1509059576.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:56.834Z,1509059576.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:57.239Z,1509059577.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:57.634Z,1509059577.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:58.040Z,1509059578.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:58.436Z,1509059578.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:58.831Z,1509059578.831 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:59.233Z,1509059579.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:12:59.638Z,1509059579.638 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:00.035Z,1509059580.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:00.447Z,1509059580.447 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:00.848Z,1509059580.848 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:01.238Z,1509059581.238 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:01.625Z,1509059581.625 [NAL9602](INFO): SBD MO Status=0, MOMSN=2551, MT Status=0, MTMSN=0
2017-10-26T23:13:01.626Z,1509059581.626 [NAL9602](INFO): No messages in MT queue
2017-10-26T23:13:01.642Z,1509059581.642 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:02.046Z,1509059582.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:02.457Z,1509059582.457 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:02.822Z,1509059582.822 [NAL9602](INFO): GPS fix at 20171026T231202: (36.802713, -121.788104)
2017-10-26T23:13:02.854Z,1509059582.854 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:02.870Z,1509059582.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): horizontalPathLengthSinceLastFix_ = 1029.95, recording fix residuals...
2017-10-26T23:13:02.898Z,1509059582.898 [UniversalFixResidualReporter](INFO): Fix residual: 98.3 %DT, over the last 1030.0 m. Residual distance 1012.6 m at bearing -172.0 degrees. Fix at (36.8027, -121.7881) with 16.0 m made good.
2017-10-26T23:13:02.899Z,1509059582.899 [Default:CheckIn:Read_GPS] Stopped
2017-10-26T23:13:02.899Z,1509059582.899 [Default:CheckIn:Read_Iridium] Running Loop=1
2017-10-26T23:13:03.263Z,1509059583.263 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:03.733Z,1509059583.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:04.046Z,1509059584.046 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:07.323Z,1509059587.323 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:07.523Z,1509059587.523 [DataOverHttps](INFO): Sending 212 bytes from file Logs/20171026T194410/Courier0016.lzma
2017-10-26T23:13:07.588Z,1509059587.588 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:07.873Z,1509059587.873 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:08.251Z,1509059588.251 [DataOverHttps](INFO): Moved sent file to Logs/20171026T194410/Courier0016.lzma.bak
2017-10-26T23:13:08.251Z,1509059588.251 [DataOverHttps](INFO): SBD MOMSN=5171696
2017-10-26T23:13:08.279Z,1509059588.279 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:08.867Z,1509059588.867 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:09.073Z,1509059589.073 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:12.344Z,1509059592.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:12.474Z,1509059592.474 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:12.818Z,1509059592.818 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:13.224Z,1509059593.224 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:13.616Z,1509059593.616 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:14.020Z,1509059594.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:17.270Z,1509059597.270 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:17.380Z,1509059597.380 [DataOverHttps](INFO): Sending 320 bytes from file Logs/20171026T194410/Express0017.lzma
2017-10-26T23:13:17.402Z,1509059597.402 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:17.777Z,1509059597.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:18.151Z,1509059598.151 [DataOverHttps](INFO): Moved sent file to Logs/20171026T194410/Express0017.lzma.bak
2017-10-26T23:13:18.151Z,1509059598.151 [DataOverHttps](INFO): SBD MOMSN=5171699
2017-10-26T23:13:18.193Z,1509059598.193 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:18.766Z,1509059598.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:18.789Z,1509059598.789 [Default:CheckIn:Read_Iridium] Stopped
2017-10-26T23:13:18.789Z,1509059598.789 [Default:CheckIn:C.Wait] Running Loop=1
2017-10-26T23:13:18.789Z,1509059598.789 [Default:CheckIn:C.Wait](DEBUG): Initialize Wait Component.
2017-10-26T23:13:18.977Z,1509059598.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:22.458Z,1509059602.458 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:22.637Z,1509059602.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:23.026Z,1509059603.026 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:23.423Z,1509059603.423 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:23.833Z,1509059603.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:24.221Z,1509059604.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:24.625Z,1509059604.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:25.030Z,1509059605.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:25.429Z,1509059605.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:25.829Z,1509059605.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:26.227Z,1509059606.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:26.629Z,1509059606.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:27.027Z,1509059607.027 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:27.431Z,1509059607.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:27.829Z,1509059607.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:28.227Z,1509059608.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:28.641Z,1509059608.641 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:29.020Z,1509059609.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:29.418Z,1509059609.418 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:29.833Z,1509059609.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:30.239Z,1509059610.239 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:30.631Z,1509059610.631 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:31.040Z,1509059611.040 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:31.432Z,1509059611.432 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:31.830Z,1509059611.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:32.231Z,1509059612.231 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:32.621Z,1509059612.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:33.022Z,1509059613.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:33.437Z,1509059613.437 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:33.824Z,1509059613.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:34.227Z,1509059614.227 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:34.624Z,1509059614.624 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:35.030Z,1509059615.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:35.429Z,1509059615.429 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:35.826Z,1509059615.826 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:36.243Z,1509059616.243 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:36.632Z,1509059616.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:37.029Z,1509059617.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:37.417Z,1509059617.417 [NAL9602](INFO): Powering down
2017-10-26T23:13:37.436Z,1509059617.436 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:37.821Z,1509059617.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:38.223Z,1509059618.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:38.639Z,1509059618.639 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:39.023Z,1509059619.023 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:39.424Z,1509059619.424 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:39.841Z,1509059619.841 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:40.222Z,1509059620.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:40.621Z,1509059620.621 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:41.022Z,1509059621.022 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:41.422Z,1509059621.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:41.829Z,1509059621.829 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:42.228Z,1509059622.228 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:42.626Z,1509059622.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:43.032Z,1509059623.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:43.430Z,1509059623.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:43.827Z,1509059623.827 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:44.229Z,1509059624.229 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:44.628Z,1509059624.628 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:45.030Z,1509059625.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:45.428Z,1509059625.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:45.838Z,1509059625.838 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:46.237Z,1509059626.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:46.634Z,1509059626.634 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:47.020Z,1509059627.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:47.434Z,1509059627.434 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:47.823Z,1509059627.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:48.222Z,1509059628.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:48.622Z,1509059628.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:49.036Z,1509059629.036 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:49.448Z,1509059629.448 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:49.825Z,1509059629.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:50.222Z,1509059630.222 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:50.629Z,1509059630.629 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:51.024Z,1509059631.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:51.426Z,1509059631.426 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:51.824Z,1509059631.824 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:52.219Z,1509059632.219 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:52.622Z,1509059632.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:53.033Z,1509059633.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:53.430Z,1509059633.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:53.833Z,1509059633.833 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:54.240Z,1509059634.240 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:54.632Z,1509059634.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:55.020Z,1509059635.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:55.441Z,1509059635.441 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:55.820Z,1509059635.820 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:56.221Z,1509059636.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:56.626Z,1509059636.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:57.039Z,1509059637.039 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:57.419Z,1509059637.419 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:57.825Z,1509059637.825 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:58.218Z,1509059638.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:58.622Z,1509059638.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:59.035Z,1509059639.035 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:59.428Z,1509059639.428 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:13:59.828Z,1509059639.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:00.233Z,1509059640.233 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:00.625Z,1509059640.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:01.034Z,1509059641.034 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:01.425Z,1509059641.425 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:01.830Z,1509059641.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:02.237Z,1509059642.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:02.637Z,1509059642.637 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:03.020Z,1509059643.020 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:03.421Z,1509059643.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:03.844Z,1509059643.844 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:04.223Z,1509059644.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:04.623Z,1509059644.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:05.038Z,1509059645.038 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:05.421Z,1509059645.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:05.822Z,1509059645.822 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:06.225Z,1509059646.225 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:06.626Z,1509059646.626 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:07.030Z,1509059647.030 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:07.431Z,1509059647.431 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:07.828Z,1509059647.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:08.230Z,1509059648.230 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:08.633Z,1509059648.633 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:09.031Z,1509059649.031 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:09.430Z,1509059649.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:09.823Z,1509059649.823 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:10.221Z,1509059650.221 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:10.620Z,1509059650.620 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:11.029Z,1509059651.029 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:11.421Z,1509059651.421 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:11.821Z,1509059651.821 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:12.223Z,1509059652.223 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:12.623Z,1509059652.623 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:13.024Z,1509059653.024 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:13.422Z,1509059653.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:13.828Z,1509059653.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:14.232Z,1509059654.232 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:14.632Z,1509059654.632 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:15.033Z,1509059655.033 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:15.430Z,1509059655.430 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:15.834Z,1509059655.834 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:16.237Z,1509059656.237 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:16.625Z,1509059656.625 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:17.032Z,1509059657.032 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:17.427Z,1509059657.427 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:17.828Z,1509059657.828 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:18.236Z,1509059658.236 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:18.622Z,1509059658.622 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:19.021Z,1509059659.021 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:19.422Z,1509059659.422 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:22.663Z,1509059662.663 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:22.809Z,1509059662.809 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:22.868Z,1509059662.868 [CBIT](DEBUG): EFC running - data check-sum false
2017-10-26T23:14:23.170Z,1509059663.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:23.572Z,1509059663.572 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:23.969Z,1509059663.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:24.370Z,1509059664.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:24.767Z,1509059664.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:25.172Z,1509059665.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:25.577Z,1509059665.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:25.972Z,1509059665.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:26.373Z,1509059666.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:26.779Z,1509059666.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:27.174Z,1509059667.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:27.560Z,1509059667.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:27.966Z,1509059667.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:28.376Z,1509059668.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:28.774Z,1509059668.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:29.182Z,1509059669.182 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:29.580Z,1509059669.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:29.959Z,1509059669.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:30.367Z,1509059670.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:30.764Z,1509059670.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:31.165Z,1509059671.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:31.565Z,1509059671.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:31.962Z,1509059671.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:32.362Z,1509059672.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:32.767Z,1509059672.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:33.166Z,1509059673.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:33.568Z,1509059673.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:33.973Z,1509059673.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:34.370Z,1509059674.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:34.770Z,1509059674.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:35.169Z,1509059675.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:35.568Z,1509059675.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:35.969Z,1509059675.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:36.372Z,1509059676.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:36.773Z,1509059676.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:37.169Z,1509059677.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:37.570Z,1509059677.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:37.970Z,1509059677.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:38.370Z,1509059678.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:38.771Z,1509059678.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:39.172Z,1509059679.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:39.577Z,1509059679.577 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:39.961Z,1509059679.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:40.374Z,1509059680.374 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:40.775Z,1509059680.775 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:41.163Z,1509059681.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:41.582Z,1509059681.582 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:41.975Z,1509059681.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:42.400Z,1509059682.400 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:42.765Z,1509059682.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:43.164Z,1509059683.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:43.563Z,1509059683.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:43.984Z,1509059683.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:44.366Z,1509059684.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:44.788Z,1509059684.788 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:45.162Z,1509059685.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:45.574Z,1509059685.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:45.975Z,1509059685.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:46.373Z,1509059686.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:46.773Z,1509059686.773 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:47.172Z,1509059687.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:47.565Z,1509059687.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:47.962Z,1509059687.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:48.362Z,1509059688.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:48.771Z,1509059688.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:49.169Z,1509059689.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:49.568Z,1509059689.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:49.962Z,1509059689.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:50.367Z,1509059690.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:50.772Z,1509059690.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:51.173Z,1509059691.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:51.571Z,1509059691.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:51.971Z,1509059691.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:52.378Z,1509059692.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:52.770Z,1509059692.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:53.170Z,1509059693.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:53.575Z,1509059693.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:53.961Z,1509059693.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:54.376Z,1509059694.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:54.777Z,1509059694.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:55.161Z,1509059695.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:55.561Z,1509059695.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:55.979Z,1509059695.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:56.361Z,1509059696.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:56.768Z,1509059696.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:57.168Z,1509059697.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:57.558Z,1509059697.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:57.963Z,1509059697.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:58.366Z,1509059698.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:58.767Z,1509059698.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:59.167Z,1509059699.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:59.576Z,1509059699.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:14:59.969Z,1509059699.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:00.367Z,1509059700.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:00.766Z,1509059700.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:01.171Z,1509059701.171 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:01.568Z,1509059701.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:01.974Z,1509059701.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:02.366Z,1509059702.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:02.874Z,1509059702.874 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:03.162Z,1509059703.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:03.576Z,1509059703.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:03.974Z,1509059703.974 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:04.364Z,1509059704.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:04.830Z,1509059704.830 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:05.167Z,1509059705.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:05.564Z,1509059705.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:05.963Z,1509059705.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:06.370Z,1509059706.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:06.765Z,1509059706.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:07.168Z,1509059707.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:07.564Z,1509059707.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:07.961Z,1509059707.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:08.362Z,1509059708.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:08.766Z,1509059708.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:09.184Z,1509059709.184 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:09.580Z,1509059709.580 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:09.980Z,1509059709.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:10.382Z,1509059710.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:10.765Z,1509059710.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:11.163Z,1509059711.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:11.564Z,1509059711.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:11.969Z,1509059711.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:12.377Z,1509059712.377 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:12.777Z,1509059712.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:13.175Z,1509059713.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:13.606Z,1509059713.606 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:13.981Z,1509059713.981 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:14.388Z,1509059714.388 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:14.769Z,1509059714.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:15.176Z,1509059715.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:15.585Z,1509059715.585 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:16.000Z,1509059716.000 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:16.371Z,1509059716.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:16.769Z,1509059716.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:17.176Z,1509059717.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:17.587Z,1509059717.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:17.980Z,1509059717.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:18.373Z,1509059718.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:18.786Z,1509059718.786 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:19.167Z,1509059719.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:19.575Z,1509059719.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:19.984Z,1509059719.984 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:24.009Z,1509059724.009 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:24.176Z,1509059724.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:24.536Z,1509059724.536 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:24.947Z,1509059724.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:25.349Z,1509059725.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:25.764Z,1509059725.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:25.803Z,1509059725.803 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:15:25.804Z,1509059725.804 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2017-10-26T23:15:25.804Z,1509059725.804 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T23:15:25.852Z,1509059725.852 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T23:15:26.132Z,1509059726.132 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:26.209Z,1509059726.209 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T23:15:26.209Z,1509059726.209 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2017-10-26T23:15:26.534Z,1509059726.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:26.575Z,1509059726.575 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T23:15:26.608Z,1509059726.608 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T23:15:26.609Z,1509059726.609 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T23:15:26.950Z,1509059726.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:27.341Z,1509059727.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:27.742Z,1509059727.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:28.139Z,1509059728.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:28.539Z,1509059728.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:28.945Z,1509059728.945 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:29.343Z,1509059729.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:29.744Z,1509059729.744 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:30.145Z,1509059730.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:30.534Z,1509059730.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:30.934Z,1509059730.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:31.341Z,1509059731.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:31.739Z,1509059731.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:32.150Z,1509059732.150 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:32.548Z,1509059732.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:32.947Z,1509059732.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:33.348Z,1509059733.348 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:33.740Z,1509059733.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:34.139Z,1509059734.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:34.538Z,1509059734.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:34.955Z,1509059734.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:35.340Z,1509059735.340 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:35.733Z,1509059735.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:36.137Z,1509059736.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:36.547Z,1509059736.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:36.944Z,1509059736.944 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:37.335Z,1509059737.335 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:37.765Z,1509059737.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:38.141Z,1509059738.141 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:38.537Z,1509059738.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:38.942Z,1509059738.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:39.336Z,1509059739.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:39.797Z,1509059739.797 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:40.183Z,1509059740.183 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:40.560Z,1509059740.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:40.949Z,1509059740.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:41.353Z,1509059741.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:41.735Z,1509059741.735 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:42.158Z,1509059742.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:42.549Z,1509059742.549 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:42.939Z,1509059742.939 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:43.360Z,1509059743.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:43.743Z,1509059743.743 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:44.167Z,1509059744.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:44.534Z,1509059744.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:44.947Z,1509059744.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:45.350Z,1509059745.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:45.742Z,1509059745.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:46.142Z,1509059746.142 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:46.546Z,1509059746.546 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:46.934Z,1509059746.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:47.360Z,1509059747.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:47.759Z,1509059747.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:48.139Z,1509059748.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:48.593Z,1509059748.593 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:48.979Z,1509059748.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:49.342Z,1509059749.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:49.742Z,1509059749.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:50.148Z,1509059750.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:50.553Z,1509059750.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:50.932Z,1509059750.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:51.332Z,1509059751.332 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:51.753Z,1509059751.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:52.134Z,1509059752.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:52.533Z,1509059752.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:52.951Z,1509059752.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:53.336Z,1509059753.336 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:53.732Z,1509059753.732 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:54.162Z,1509059754.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:54.540Z,1509059754.540 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:54.935Z,1509059754.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:55.351Z,1509059755.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:55.747Z,1509059755.747 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:56.145Z,1509059756.145 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:56.539Z,1509059756.539 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:56.949Z,1509059756.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:57.349Z,1509059757.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:57.734Z,1509059757.734 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:58.144Z,1509059758.144 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:58.533Z,1509059758.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:58.947Z,1509059758.947 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:59.345Z,1509059759.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:15:59.739Z,1509059759.739 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:00.146Z,1509059760.146 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:00.543Z,1509059760.543 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:00.933Z,1509059760.933 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:01.344Z,1509059761.344 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:01.759Z,1509059761.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:02.138Z,1509059762.138 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:02.534Z,1509059762.534 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:02.936Z,1509059762.936 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:03.338Z,1509059763.338 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:03.740Z,1509059763.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:04.139Z,1509059764.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:04.541Z,1509059764.541 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:04.943Z,1509059764.943 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:05.350Z,1509059765.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:05.740Z,1509059765.740 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:06.156Z,1509059766.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:06.538Z,1509059766.538 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:06.935Z,1509059766.935 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:07.343Z,1509059767.343 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:07.762Z,1509059767.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:08.137Z,1509059768.137 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:08.544Z,1509059768.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:08.951Z,1509059768.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:09.342Z,1509059769.342 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:09.742Z,1509059769.742 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:10.134Z,1509059770.134 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:10.528Z,1509059770.528 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:10.942Z,1509059770.942 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:11.351Z,1509059771.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:11.737Z,1509059771.737 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:12.149Z,1509059772.149 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:12.548Z,1509059772.548 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:12.934Z,1509059772.934 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:13.334Z,1509059773.334 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:13.762Z,1509059773.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:14.139Z,1509059774.139 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:14.547Z,1509059774.547 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:14.946Z,1509059774.946 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:15.346Z,1509059775.346 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:15.749Z,1509059775.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:16.135Z,1509059776.135 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:16.533Z,1509059776.533 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:16.932Z,1509059776.932 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:17.341Z,1509059777.341 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:17.733Z,1509059777.733 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:18.153Z,1509059778.153 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:18.544Z,1509059778.544 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:18.948Z,1509059778.948 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:19.345Z,1509059779.345 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:19.750Z,1509059779.750 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:20.154Z,1509059780.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:24.245Z,1509059784.245 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:24.390Z,1509059784.390 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:24.774Z,1509059784.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:25.162Z,1509059785.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:25.561Z,1509059785.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:25.967Z,1509059785.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:26.365Z,1509059786.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:26.767Z,1509059786.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:27.167Z,1509059787.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:27.562Z,1509059787.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:27.966Z,1509059787.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:28.367Z,1509059788.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:28.774Z,1509059788.774 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:29.174Z,1509059789.174 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:29.576Z,1509059789.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:29.977Z,1509059789.977 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:30.373Z,1509059790.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:30.779Z,1509059790.779 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:31.160Z,1509059791.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:31.562Z,1509059791.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:31.969Z,1509059791.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:32.387Z,1509059792.387 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:32.765Z,1509059792.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:33.166Z,1509059793.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:33.589Z,1509059793.589 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:33.975Z,1509059793.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:34.366Z,1509059794.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:34.783Z,1509059794.783 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:35.180Z,1509059795.180 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:35.561Z,1509059795.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:35.961Z,1509059795.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:36.366Z,1509059796.366 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:36.767Z,1509059796.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:37.167Z,1509059797.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:37.567Z,1509059797.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:37.970Z,1509059797.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:38.367Z,1509059798.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:38.778Z,1509059798.778 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:39.177Z,1509059799.177 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:39.575Z,1509059799.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:39.980Z,1509059799.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:40.395Z,1509059800.395 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:40.763Z,1509059800.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:41.163Z,1509059801.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:41.586Z,1509059801.586 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:41.985Z,1509059801.985 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:42.382Z,1509059802.382 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:42.770Z,1509059802.770 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:43.170Z,1509059803.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:43.570Z,1509059803.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:43.975Z,1509059803.975 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:44.371Z,1509059804.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:44.771Z,1509059804.771 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:45.176Z,1509059805.176 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:45.560Z,1509059805.560 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:45.979Z,1509059805.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:46.378Z,1509059806.378 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:46.765Z,1509059806.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:47.163Z,1509059807.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:47.568Z,1509059807.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:47.964Z,1509059807.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:48.361Z,1509059808.361 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:48.766Z,1509059808.766 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:49.170Z,1509059809.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:49.567Z,1509059809.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:49.968Z,1509059809.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:50.376Z,1509059810.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:50.769Z,1509059810.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:51.167Z,1509059811.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:51.566Z,1509059811.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:51.972Z,1509059811.972 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:52.369Z,1509059812.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:52.768Z,1509059812.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:53.173Z,1509059813.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:53.575Z,1509059813.575 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:53.970Z,1509059813.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:54.371Z,1509059814.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:54.777Z,1509059814.777 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:55.167Z,1509059815.167 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:55.571Z,1509059815.571 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:55.961Z,1509059815.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:56.365Z,1509059816.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:56.762Z,1509059816.762 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:57.163Z,1509059817.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:57.563Z,1509059817.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:57.964Z,1509059817.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:58.369Z,1509059818.369 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:58.769Z,1509059818.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:59.170Z,1509059819.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:59.570Z,1509059819.570 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:16:59.971Z,1509059819.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:00.370Z,1509059820.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:00.769Z,1509059820.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:01.169Z,1509059821.169 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:01.569Z,1509059821.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:01.970Z,1509059821.970 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:02.365Z,1509059822.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:02.772Z,1509059822.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:03.173Z,1509059823.173 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:03.581Z,1509059823.581 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:03.962Z,1509059823.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:04.362Z,1509059824.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:04.781Z,1509059824.781 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:05.175Z,1509059825.175 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:05.563Z,1509059825.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:05.583Z,1509059825.583 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T23:17:05.583Z,1509059825.583 [BPC1] Data Fault, FailCount= 1
2017-10-26T23:17:05.583Z,1509059825.583 [BPC1](ERROR): Data Fault
2017-10-26T23:17:05.609Z,1509059825.609 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T23:17:05.971Z,1509059825.971 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:06.373Z,1509059826.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:06.761Z,1509059826.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:06.809Z,1509059826.809 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T23:17:06.809Z,1509059826.809 [BPC1] No Fault, FailCount= 1
2017-10-26T23:17:07.162Z,1509059827.162 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:07.587Z,1509059827.587 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:07.979Z,1509059827.979 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:08.376Z,1509059828.376 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:08.761Z,1509059828.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:09.165Z,1509059829.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:09.566Z,1509059829.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:09.962Z,1509059829.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:10.368Z,1509059830.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:10.769Z,1509059830.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:11.172Z,1509059831.172 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:11.573Z,1509059831.573 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:11.973Z,1509059831.973 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:12.372Z,1509059832.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:12.772Z,1509059832.772 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:13.164Z,1509059833.164 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:13.565Z,1509059833.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:13.969Z,1509059833.969 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:14.371Z,1509059834.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:14.768Z,1509059834.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:15.170Z,1509059835.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:15.576Z,1509059835.576 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:15.980Z,1509059835.980 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:16.364Z,1509059836.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:16.765Z,1509059836.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:17.161Z,1509059837.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:17.562Z,1509059837.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:17.963Z,1509059837.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:18.367Z,1509059838.367 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:18.387Z,1509059838.387 [BPC1](ERROR): Failed to parse message.
2017-10-26T23:17:18.387Z,1509059838.387 [BPC1](ERROR): Failed to parse bank B battery data
2017-10-26T23:17:18.387Z,1509059838.387 [BPC1] Data Fault, FailCount= 2
2017-10-26T23:17:18.387Z,1509059838.387 [BPC1](ERROR): Data Fault
2017-10-26T23:17:18.413Z,1509059838.413 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T23:17:18.764Z,1509059838.764 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:19.165Z,1509059839.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:19.561Z,1509059839.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:19.614Z,1509059839.614 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T23:17:19.615Z,1509059839.615 [BPC1] No Fault, FailCount= 2
2017-10-26T23:17:19.961Z,1509059839.961 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:23.218Z,1509059843.218 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:23.373Z,1509059843.373 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:23.760Z,1509059843.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:24.160Z,1509059844.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:24.561Z,1509059844.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:24.959Z,1509059844.959 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:25.362Z,1509059845.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:25.759Z,1509059845.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:26.160Z,1509059846.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:26.561Z,1509059846.561 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:26.965Z,1509059846.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:27.358Z,1509059847.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:27.763Z,1509059847.763 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:28.158Z,1509059848.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:28.568Z,1509059848.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:28.962Z,1509059848.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:29.353Z,1509059849.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:29.754Z,1509059849.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:30.166Z,1509059850.166 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:30.564Z,1509059850.564 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:30.951Z,1509059850.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:31.365Z,1509059851.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:31.752Z,1509059851.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:32.165Z,1509059852.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:32.565Z,1509059852.565 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:32.954Z,1509059852.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:33.363Z,1509059853.363 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:33.767Z,1509059853.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:34.160Z,1509059854.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:34.569Z,1509059854.569 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:34.957Z,1509059854.957 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:35.370Z,1509059855.370 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:35.752Z,1509059855.752 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:36.159Z,1509059856.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:36.559Z,1509059856.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:36.950Z,1509059856.950 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:37.357Z,1509059857.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:37.753Z,1509059857.753 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:38.158Z,1509059858.158 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:38.559Z,1509059858.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:38.956Z,1509059858.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:39.357Z,1509059859.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:39.765Z,1509059859.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:40.161Z,1509059860.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:40.562Z,1509059860.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:40.967Z,1509059860.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:41.360Z,1509059861.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:41.749Z,1509059861.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:42.161Z,1509059862.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:42.562Z,1509059862.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:42.951Z,1509059862.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:43.371Z,1509059863.371 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:43.751Z,1509059863.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:44.155Z,1509059864.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:44.556Z,1509059864.556 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:44.952Z,1509059864.952 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:45.353Z,1509059865.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:45.754Z,1509059865.754 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:46.154Z,1509059866.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:46.559Z,1509059866.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:46.956Z,1509059866.956 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:47.356Z,1509059867.356 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:47.757Z,1509059867.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:48.156Z,1509059868.156 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:48.558Z,1509059868.558 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:48.965Z,1509059868.965 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:49.365Z,1509059869.365 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:49.758Z,1509059869.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:50.160Z,1509059870.160 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:50.567Z,1509059870.567 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:50.963Z,1509059870.963 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:51.357Z,1509059871.357 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:51.759Z,1509059871.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:52.161Z,1509059872.161 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:52.563Z,1509059872.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:52.964Z,1509059872.964 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:53.372Z,1509059873.372 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:53.767Z,1509059873.767 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:54.148Z,1509059874.148 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:54.555Z,1509059874.555 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:54.949Z,1509059874.949 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:55.350Z,1509059875.350 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:55.757Z,1509059875.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:56.151Z,1509059876.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:56.551Z,1509059876.551 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:56.955Z,1509059876.955 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:57.349Z,1509059877.349 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:57.757Z,1509059877.757 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:58.170Z,1509059878.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:58.554Z,1509059878.554 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:58.967Z,1509059878.967 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:59.351Z,1509059879.351 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:17:59.768Z,1509059879.768 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:00.152Z,1509059880.152 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:00.568Z,1509059880.568 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:00.954Z,1509059880.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:01.354Z,1509059881.354 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:01.751Z,1509059881.751 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:02.168Z,1509059882.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:02.553Z,1509059882.553 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:02.954Z,1509059882.954 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:03.358Z,1509059883.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:03.755Z,1509059883.755 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:04.154Z,1509059884.154 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:04.559Z,1509059884.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:04.960Z,1509059884.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:05.360Z,1509059885.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:05.761Z,1509059885.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:06.159Z,1509059886.159 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:06.566Z,1509059886.566 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:06.960Z,1509059886.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:07.360Z,1509059887.360 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:07.769Z,1509059887.769 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:08.157Z,1509059888.157 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:08.562Z,1509059888.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:08.962Z,1509059888.962 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:09.358Z,1509059889.358 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:09.749Z,1509059889.749 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:10.168Z,1509059890.168 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:10.550Z,1509059890.550 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:10.951Z,1509059890.951 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:11.353Z,1509059891.353 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:11.758Z,1509059891.758 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:12.155Z,1509059892.155 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:12.563Z,1509059892.563 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:12.960Z,1509059892.960 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:13.362Z,1509059893.362 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:13.761Z,1509059893.761 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:14.163Z,1509059894.163 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:14.559Z,1509059894.559 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:14.968Z,1509059894.968 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:15.364Z,1509059895.364 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:15.765Z,1509059895.765 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:16.170Z,1509059896.170 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:16.562Z,1509059896.562 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:16.966Z,1509059896.966 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:17.368Z,1509059897.368 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:17.760Z,1509059897.760 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:18.165Z,1509059898.165 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:18.574Z,1509059898.574 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:18.953Z,1509059898.953 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:19.355Z,1509059899.355 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:19.393Z,1509059899.393 [Default:CheckIn:C.Wait](INFO): Done Waiting.
2017-10-26T23:18:19.393Z,1509059899.393 [Default:CheckIn:C.Wait] Stopped
2017-10-26T23:18:19.393Z,1509059899.393 [Default:CheckIn:C.Wait](DEBUG): Uninitialize Wait Component.
2017-10-26T23:18:19.394Z,1509059899.394 [Default:CheckIn:D] Running Loop=1
2017-10-26T23:18:19.759Z,1509059899.759 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:19.834Z,1509059899.834 [Default:CheckIn:D] Stopped
2017-10-26T23:18:19.834Z,1509059899.834 [Default:CheckIn:E] Running Loop=1
2017-10-26T23:18:20.151Z,1509059900.151 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:20.207Z,1509059900.207 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 21.560213 min 
2017-10-26T23:18:20.207Z,1509059900.207 [Default:CheckIn:E] Stopped
2017-10-26T23:18:20.207Z,1509059900.207 [Default:CheckIn](INFO): Completed Default:CheckIn
2017-10-26T23:18:20.207Z,1509059900.207 [Default:CheckIn] Stopped
2017-10-26T23:18:20.208Z,1509059900.208 [Default:CheckIn](DEBUG): Aggregate::uninitialize Default:CheckIn
2017-10-26T23:18:20.208Z,1509059900.208 [Default:CheckIn](INFO): Running loop #3
2017-10-26T23:18:20.208Z,1509059900.208 [Default:CheckIn] Running Loop=3
2017-10-26T23:18:20.208Z,1509059900.208 [Default:CheckIn](DEBUG): Aggregate::initialize Default:CheckIn
2017-10-26T23:18:20.208Z,1509059900.208 [Default:CheckIn:Read_GPS] Running Loop=1
2017-10-26T23:18:23.414Z,1509059903.414 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:23.518Z,1509059903.518 [NAL9602](INFO): Powering up
2017-10-26T23:18:23.537Z,1509059903.537 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:23.902Z,1509059903.902 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:24.301Z,1509059904.301 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:24.704Z,1509059904.704 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:25.105Z,1509059905.105 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:25.504Z,1509059905.504 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:25.900Z,1509059905.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:26.293Z,1509059906.293 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:26.702Z,1509059906.702 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:26.722Z,1509059906.722 [DeadReckonWithRespectToSeafloor](ERROR): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2017-10-26T23:18:26.722Z,1509059906.722 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2017-10-26T23:18:26.722Z,1509059906.722 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2017-10-26T23:18:26.736Z,1509059906.736 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2017-10-26T23:18:27.090Z,1509059907.090 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:27.139Z,1509059907.139 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2017-10-26T23:18:27.139Z,1509059907.139 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2017-10-26T23:18:27.495Z,1509059907.495 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:27.534Z,1509059907.534 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2017-10-26T23:18:27.535Z,1509059907.535 [DeadReckonWithRespectToSeafloor](INFO): Will consider orientation measurement stale after 120s.
2017-10-26T23:18:27.535Z,1509059907.535 [DeadReckonWithRespectToSeafloor](INFO): Will consider velocity measurement stale after 20s.
2017-10-26T23:18:27.893Z,1509059907.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:28.303Z,1509059908.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:28.698Z,1509059908.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:29.100Z,1509059909.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:29.502Z,1509059909.502 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:29.890Z,1509059909.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:30.328Z,1509059910.328 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:30.692Z,1509059910.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:31.088Z,1509059911.088 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:31.497Z,1509059911.497 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:31.899Z,1509059911.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:32.298Z,1509059912.298 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:32.691Z,1509059912.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:33.104Z,1509059913.104 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:33.500Z,1509059913.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:33.896Z,1509059913.896 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:34.312Z,1509059914.312 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:34.682Z,1509059914.682 [NAL9602](INFO): NAL9602 initialized
2017-10-26T23:18:34.700Z,1509059914.700 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:35.100Z,1509059915.100 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:35.507Z,1509059915.507 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:35.910Z,1509059915.910 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:36.320Z,1509059916.320 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:36.703Z,1509059916.703 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:37.091Z,1509059917.091 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:37.513Z,1509059917.513 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:37.919Z,1509059917.919 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:38.311Z,1509059918.311 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:38.692Z,1509059918.692 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:39.097Z,1509059919.097 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:39.490Z,1509059919.490 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:39.890Z,1509059919.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:40.308Z,1509059920.308 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:40.697Z,1509059920.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:41.103Z,1509059921.103 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:41.500Z,1509059921.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:41.899Z,1509059921.899 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:42.309Z,1509059922.309 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:42.713Z,1509059922.713 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:43.117Z,1509059923.117 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:43.517Z,1509059923.517 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:43.893Z,1509059923.893 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:44.302Z,1509059924.302 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:44.697Z,1509059924.697 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:45.099Z,1509059925.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:45.500Z,1509059925.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:45.900Z,1509059925.900 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:45.908Z,1509059925.908 [BPC1](ERROR): Failed to parse bank A battery data
2017-10-26T23:18:45.908Z,1509059925.908 [BPC1] Data Fault, FailCount= 1
2017-10-26T23:18:45.908Z,1509059925.908 [BPC1](ERROR): Data Fault
2017-10-26T23:18:45.989Z,1509059925.989 [CBIT](ERROR): Data Fault in component: BPC1
2017-10-26T23:18:46.303Z,1509059926.303 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:46.698Z,1509059926.698 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:47.099Z,1509059927.099 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:47.132Z,1509059927.132 [CBIT](INFO): Clearing failed state for component BPC1
2017-10-26T23:18:47.132Z,1509059927.132 [BPC1] No Fault, FailCount= 1
2017-10-26T23:18:47.508Z,1509059927.508 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:47.914Z,1509059927.914 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:48.316Z,1509059928.316 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:48.720Z,1509059928.720 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:49.108Z,1509059929.108 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:49.491Z,1509059929.491 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:49.890Z,1509059929.890 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:50.294Z,1509059930.294 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:50.691Z,1509059930.691 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:51.092Z,1509059931.092 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.
2017-10-26T23:18:51.500Z,1509059931.500 [PNI_TCM](DEBUG): LCB error: Software Overcurrent.