2016-06-27T03:52:57.354Z,1466999577.354 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg 2016-06-27T03:53:04.378Z,1466999584.378 [SBIT](IMPORTANT): git: 2015-11-13-11-g036008f 2016-06-27T03:53:04.379Z,1466999584.379 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8 2016-06-27T03:53:04.379Z,1466999584.379 [SBIT](IMPORTANT): Kernel Version:#639 PREEMPT Wed Mar 12 12:53:33 PDT 2014 2016-06-27T03:53:04.382Z,1466999584.382 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL. 2016-06-27T03:53:04.382Z,1466999584.382 [CBIT](CRITICAL): LAST REBOOT DUE TO WATCHDOG TIMER RESET. 2016-06-27T03:53:04.535Z,1466999584.535 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T03:53:05.987Z,1466999585.987 [CommandLine](FAULT): Scheduling is paused 2016-06-27T03:53:06.833Z,1466999586.833 [BuoyancyServo](FAULT): Buoyancy failed to initialize 2016-06-27T03:53:17.907Z,1466999597.907 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T03:53:32.291Z,1466999612.291 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T03:53:46.700Z,1466999626.700 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T03:54:01.111Z,1466999641.111 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T03:54:07.924Z,1466999647.924 [SBIT](IMPORTANT): Beginning Startup BIT 2016-06-27T03:54:07.926Z,1466999647.926 [CBIT](IMPORTANT): Beginning GF scan 2016-06-27T03:54:23.793Z,1466999663.793 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-27T03:54:23.928Z,1466999663.928 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T03:54:34.252Z,1466999674.252 [CBIT](IMPORTANT): No ground fault detected 2016-06-27T03:55:01.761Z,1466999701.761 [SBIT](IMPORTANT): SBIT PASSED 2016-06-27T03:55:02.129Z,1466999702.129 [MissionManager](IMPORTANT): Started mission Startup 2016-06-27T03:55:04.527Z,1466999704.527 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T03:55:04.529Z,1466999704.529 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T03:55:04.728Z,1466999704.728 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T03:55:06.738Z,1466999706.738 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T03:56:48.801Z,1466999808.801 [MissionManager](IMPORTANT): Started mission Default 2016-06-27T03:57:05.334Z,1466999825.334 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T03:57:05.336Z,1466999825.336 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T03:57:07.070Z,1466999827.070 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T03:57:09.080Z,1466999829.080 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T03:58:20.612Z,1466999900.612 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session. 2016-06-27T03:59:06.364Z,1466999946.364 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T03:59:06.366Z,1466999946.366 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T03:59:09.420Z,1466999949.420 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T03:59:11.430Z,1466999951.430 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T03:59:36.771Z,1466999976.771 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T03:59:52.800Z,1466999992.800 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:00:06.869Z,1467000006.869 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:00:21.270Z,1467000021.270 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:00:35.653Z,1467000035.653 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:00:35.673Z,1467000035.673 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T04:01:07.454Z,1467000067.454 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:01:07.456Z,1467000067.456 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:01:11.450Z,1467000071.450 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T04:01:13.463Z,1467000073.463 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T04:03:08.606Z,1467000188.606 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:03:08.607Z,1467000188.607 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:03:13.751Z,1467000193.751 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T04:03:13.775Z,1467000193.775 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T04:03:19.736Z,1467000199.736 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T04:05:09.607Z,1467000309.607 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:05:09.609Z,1467000309.609 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:05:48.788Z,1467000348.788 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:06:03.171Z,1467000363.171 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:06:17.564Z,1467000377.564 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:06:34.493Z,1467000394.493 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:06:48.886Z,1467000408.886 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:06:48.905Z,1467000408.905 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T04:07:10.488Z,1467000430.488 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:07:10.490Z,1467000430.490 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:07:20.147Z,1467000440.147 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 10.515291 min 2016-06-27T04:09:11.450Z,1467000551.450 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:09:11.452Z,1467000551.452 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:11:12.564Z,1467000672.564 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:11:12.566Z,1467000672.566 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:12:01.536Z,1467000721.536 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:12:15.544Z,1467000735.544 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:12:29.561Z,1467000749.561 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:12:49.566Z,1467000769.566 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:13:03.963Z,1467000783.963 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:13:03.982Z,1467000783.982 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T04:13:13.575Z,1467000793.575 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:13:13.578Z,1467000793.578 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:13:14.377Z,1467000794.377 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T04:13:40.519Z,1467000820.519 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T04:15:14.688Z,1467000914.688 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:15:14.690Z,1467000914.690 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:15:14.736Z,1467000914.736 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T04:15:16.746Z,1467000916.746 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T04:17:15.850Z,1467001035.850 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:17:15.852Z,1467001035.852 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:17:16.786Z,1467001036.786 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T04:17:18.796Z,1467001038.796 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T04:17:37.495Z,1467001057.495 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 20.804319 min 2016-06-27T04:18:16.881Z,1467001096.881 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:18:31.294Z,1467001111.294 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:18:45.390Z,1467001125.390 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:18:59.414Z,1467001139.414 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:19:13.796Z,1467001153.796 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:19:13.814Z,1467001153.814 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T04:19:17.003Z,1467001157.003 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:19:17.005Z,1467001157.005 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:19:19.108Z,1467001159.108 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T04:19:21.117Z,1467001161.117 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T04:21:18.020Z,1467001278.020 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:21:18.023Z,1467001278.023 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:21:21.441Z,1467001281.441 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T04:21:23.451Z,1467001283.451 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T04:23:18.970Z,1467001398.970 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:23:18.972Z,1467001398.972 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:23:23.847Z,1467001403.847 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T04:23:24.218Z,1467001404.218 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T04:23:58.289Z,1467001438.289 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T04:24:27.934Z,1467001467.934 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-27T04:24:43.507Z,1467001483.507 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-27T04:24:57.520Z,1467001497.520 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:25:11.218Z,1467001511.218 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:25:20.083Z,1467001520.083 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:25:20.084Z,1467001520.084 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:25:25.610Z,1467001525.610 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:25:25.630Z,1467001525.630 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T04:27:20.993Z,1467001640.993 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:27:20.994Z,1467001640.994 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:27:54.613Z,1467001674.613 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 31.090173 min 2016-06-27T04:29:21.965Z,1467001761.965 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:29:21.967Z,1467001761.967 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:30:38.414Z,1467001838.414 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:30:52.847Z,1467001852.847 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:31:09.354Z,1467001869.354 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:31:22.958Z,1467001882.958 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:31:22.961Z,1467001882.961 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:31:23.731Z,1467001883.731 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:31:38.139Z,1467001898.139 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:31:38.159Z,1467001898.159 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T04:33:23.808Z,1467002003.808 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:33:23.810Z,1467002003.810 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:33:24.469Z,1467002004.469 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T04:34:17.164Z,1467002057.164 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T04:35:24.852Z,1467002124.852 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T04:35:24.947Z,1467002124.947 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:35:24.949Z,1467002124.949 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:35:26.870Z,1467002126.870 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T04:36:51.095Z,1467002211.095 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:37:05.494Z,1467002225.494 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:37:19.604Z,1467002239.604 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:37:26.024Z,1467002246.024 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:37:26.026Z,1467002246.026 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:37:27.082Z,1467002247.082 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T04:37:29.096Z,1467002249.096 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T04:37:34.004Z,1467002254.004 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:37:48.409Z,1467002268.409 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:37:48.427Z,1467002268.427 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T04:38:11.633Z,1467002291.633 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 41.374593 min 2016-06-27T04:39:27.083Z,1467002367.083 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:39:27.085Z,1467002367.085 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:39:29.475Z,1467002369.475 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T04:39:31.489Z,1467002371.489 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T04:41:28.157Z,1467002488.157 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:41:28.159Z,1467002488.159 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:41:31.882Z,1467002491.882 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T04:41:33.892Z,1467002493.892 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T04:43:01.466Z,1467002581.466 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:43:15.800Z,1467002595.800 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:43:31.046Z,1467002611.046 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:43:31.048Z,1467002611.048 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:43:31.933Z,1467002611.933 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:43:34.187Z,1467002614.187 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T04:43:34.356Z,1467002614.356 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T04:43:45.927Z,1467002625.927 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:44:00.309Z,1467002640.309 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:44:00.381Z,1467002640.381 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T04:44:36.007Z,1467002676.007 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T04:44:36.071Z,1467002676.071 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T04:45:33.752Z,1467002733.752 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:45:33.754Z,1467002733.754 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:47:34.503Z,1467002854.503 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:47:34.505Z,1467002854.505 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:48:28.940Z,1467002908.940 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 51.661666 min 2016-06-27T04:49:13.050Z,1467002953.050 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:49:27.433Z,1467002967.433 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:49:35.563Z,1467002975.563 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:49:35.564Z,1467002975.564 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:49:44.347Z,1467002984.347 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:49:58.759Z,1467002998.759 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:50:13.167Z,1467003013.167 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:50:13.185Z,1467003013.185 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T04:51:36.353Z,1467003096.353 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:51:36.355Z,1467003096.355 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:53:34.373Z,1467003214.373 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T04:53:38.581Z,1467003218.581 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:53:38.615Z,1467003218.615 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:55:26.144Z,1467003326.144 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:55:34.756Z,1467003334.756 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T04:55:36.766Z,1467003336.766 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T04:55:39.358Z,1467003339.358 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:55:39.360Z,1467003339.360 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:55:40.526Z,1467003340.526 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:55:54.628Z,1467003354.628 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:56:09.028Z,1467003369.028 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:56:23.429Z,1467003383.429 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T04:56:23.474Z,1467003383.474 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T04:56:51.106Z,1467003411.106 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T04:57:37.134Z,1467003457.134 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T04:57:39.144Z,1467003459.144 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T04:57:40.342Z,1467003460.342 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:57:40.343Z,1467003460.343 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:58:46.477Z,1467003526.477 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 61.954163 min 2016-06-27T04:59:39.504Z,1467003579.504 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T04:59:41.394Z,1467003581.394 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:59:41.395Z,1467003581.395 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T04:59:41.514Z,1467003581.514 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T05:01:36.422Z,1467003696.422 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:01:41.847Z,1467003701.847 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T05:01:42.436Z,1467003702.436 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:01:42.438Z,1467003702.438 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:01:43.855Z,1467003703.855 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T05:01:50.466Z,1467003710.466 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:02:04.825Z,1467003724.825 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:02:19.217Z,1467003739.217 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:02:33.647Z,1467003753.647 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:02:33.666Z,1467003753.666 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T05:03:43.369Z,1467003823.369 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:03:43.371Z,1467003823.371 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:03:43.935Z,1467003823.935 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T05:03:44.195Z,1467003824.195 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T05:05:44.304Z,1467003944.304 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:05:44.306Z,1467003944.306 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:07:08.833Z,1467004028.833 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T05:07:45.264Z,1467004065.264 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:07:45.265Z,1467004065.265 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:07:46.442Z,1467004066.442 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:08:00.854Z,1467004080.854 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:08:17.744Z,1467004097.744 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:08:32.131Z,1467004112.131 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:08:46.161Z,1467004126.161 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:08:46.180Z,1467004126.180 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T05:09:03.341Z,1467004143.341 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 72.235636 min 2016-06-27T05:09:46.283Z,1467004186.283 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:09:46.285Z,1467004186.285 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:11:47.358Z,1467004307.358 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:11:47.360Z,1467004307.360 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:13:44.144Z,1467004424.144 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T05:13:48.431Z,1467004428.431 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:13:48.433Z,1467004428.433 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:13:59.170Z,1467004439.170 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:14:13.303Z,1467004453.303 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:14:32.943Z,1467004472.943 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:14:46.962Z,1467004486.962 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:15:01.332Z,1467004501.332 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:15:01.352Z,1467004501.352 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T05:15:44.487Z,1467004544.487 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T05:15:46.502Z,1467004546.502 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T05:15:49.562Z,1467004549.562 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:15:49.564Z,1467004549.564 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:17:28.655Z,1467004648.655 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T05:17:46.834Z,1467004666.834 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T05:17:48.844Z,1467004668.844 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T05:17:50.690Z,1467004670.690 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:17:50.692Z,1467004670.692 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:19:20.497Z,1467004760.497 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 82.521802 min 2016-06-27T05:19:49.211Z,1467004789.211 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T05:19:51.225Z,1467004791.225 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T05:19:51.843Z,1467004791.843 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:19:51.845Z,1467004791.845 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:20:14.187Z,1467004814.187 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:20:28.564Z,1467004828.564 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:20:42.936Z,1467004842.936 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:20:56.970Z,1467004856.970 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:21:11.340Z,1467004871.340 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:21:11.358Z,1467004871.358 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T05:21:51.621Z,1467004911.621 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T05:21:52.649Z,1467004912.649 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:21:52.651Z,1467004912.651 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:21:53.631Z,1467004913.631 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T05:23:53.750Z,1467005033.750 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:23:53.752Z,1467005033.752 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:23:53.903Z,1467005033.903 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T05:23:54.199Z,1467005034.199 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T05:25:54.592Z,1467005154.592 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:25:54.594Z,1467005154.594 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:26:24.194Z,1467005184.194 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:26:40.630Z,1467005200.630 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:26:54.778Z,1467005214.778 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:27:09.168Z,1467005229.168 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:27:23.556Z,1467005243.556 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:27:23.574Z,1467005243.574 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T05:27:47.655Z,1467005267.655 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T05:27:55.693Z,1467005275.693 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:27:55.695Z,1467005275.695 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:29:37.820Z,1467005377.820 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 92.810262 min 2016-06-27T05:29:56.703Z,1467005396.703 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:29:56.706Z,1467005396.706 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:31:57.657Z,1467005517.657 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:31:57.659Z,1467005517.659 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:32:36.458Z,1467005556.458 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:32:53.360Z,1467005573.360 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:33:07.738Z,1467005587.738 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:33:22.137Z,1467005602.137 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:33:36.157Z,1467005616.157 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:33:36.208Z,1467005616.208 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T05:33:54.100Z,1467005634.100 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T05:33:58.732Z,1467005638.732 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:33:58.734Z,1467005638.734 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:35:54.468Z,1467005754.468 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T05:35:57.684Z,1467005757.684 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T05:35:59.649Z,1467005759.649 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:35:59.651Z,1467005759.651 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:37:58.015Z,1467005878.015 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T05:38:00.026Z,1467005880.026 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T05:38:00.658Z,1467005880.658 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:38:00.659Z,1467005880.659 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:38:06.245Z,1467005886.245 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T05:38:06.310Z,1467005886.310 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T05:38:49.051Z,1467005929.051 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:39:03.181Z,1467005943.181 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:39:17.580Z,1467005957.580 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:39:31.982Z,1467005971.982 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:39:46.388Z,1467005986.388 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:39:46.407Z,1467005986.407 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T05:39:54.799Z,1467005994.799 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 103.093343 min 2016-06-27T05:40:00.381Z,1467006000.381 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T05:40:01.755Z,1467006001.755 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:40:01.756Z,1467006001.756 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:40:02.391Z,1467006002.391 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T05:42:02.426Z,1467006122.426 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T05:42:02.796Z,1467006122.796 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:42:02.798Z,1467006122.798 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:42:04.476Z,1467006124.476 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T05:44:03.948Z,1467006243.948 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:44:03.962Z,1467006243.962 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:44:04.756Z,1467006244.756 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T05:44:05.132Z,1467006245.132 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T05:45:00.867Z,1467006300.867 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-27T05:45:21.082Z,1467006321.082 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-27T05:45:36.631Z,1467006336.631 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-27T05:45:51.046Z,1467006351.046 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:46:05.036Z,1467006365.036 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:46:05.078Z,1467006365.078 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:46:05.080Z,1467006365.080 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:46:05.092Z,1467006365.092 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T05:48:06.075Z,1467006486.075 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:48:06.077Z,1467006486.077 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:50:07.044Z,1467006607.044 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:50:07.046Z,1467006607.046 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:50:11.888Z,1467006611.888 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 113.377360 min 2016-06-27T05:50:19.934Z,1467006619.934 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T05:51:17.709Z,1467006677.709 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:51:31.708Z,1467006691.708 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:51:46.078Z,1467006706.078 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:52:00.479Z,1467006720.479 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:52:08.105Z,1467006728.105 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:52:08.106Z,1467006728.106 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:52:15.304Z,1467006735.304 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:52:15.414Z,1467006735.414 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T05:54:04.949Z,1467006844.949 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T05:54:09.275Z,1467006849.275 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:54:09.281Z,1467006849.281 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:56:05.301Z,1467006965.301 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T05:56:07.311Z,1467006967.311 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T05:56:10.028Z,1467006970.028 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:56:10.030Z,1467006970.030 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:57:28.161Z,1467007048.161 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:57:42.352Z,1467007062.352 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:57:56.365Z,1467007076.365 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:58:07.655Z,1467007087.655 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T05:58:09.669Z,1467007089.669 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T05:58:10.750Z,1467007090.750 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:58:11.275Z,1467007091.275 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:58:11.278Z,1467007091.278 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T05:58:25.146Z,1467007105.146 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T05:58:25.203Z,1467007105.203 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T06:00:09.969Z,1467007209.969 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T06:00:11.978Z,1467007211.978 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T06:00:12.220Z,1467007212.220 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:00:12.221Z,1467007212.221 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:00:35.445Z,1467007235.445 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 123.770597 min 2016-06-27T06:00:39.510Z,1467007239.510 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T06:02:12.278Z,1467007332.278 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T06:02:13.229Z,1467007333.229 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:02:13.231Z,1467007333.231 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:02:14.288Z,1467007334.288 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T06:03:39.388Z,1467007419.388 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:03:53.472Z,1467007433.472 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:04:07.859Z,1467007447.859 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:04:14.261Z,1467007454.261 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:04:14.279Z,1467007454.279 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:04:14.650Z,1467007454.650 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T06:04:14.705Z,1467007454.705 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T06:04:21.879Z,1467007461.879 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:04:36.278Z,1467007476.278 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:04:36.333Z,1467007476.333 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T06:06:15.219Z,1467007575.219 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:06:15.220Z,1467007575.220 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:08:16.188Z,1467007696.188 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:08:16.190Z,1467007696.190 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:09:49.468Z,1467007789.468 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:10:06.415Z,1467007806.415 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:10:17.183Z,1467007817.183 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:10:17.186Z,1467007817.186 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:10:20.781Z,1467007820.781 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:10:35.182Z,1467007835.182 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:10:49.586Z,1467007849.586 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:10:49.634Z,1467007849.634 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T06:10:52.398Z,1467007852.398 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 134.053410 min 2016-06-27T06:10:58.078Z,1467007858.078 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T06:12:18.212Z,1467007938.212 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:12:18.214Z,1467007938.214 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:14:14.886Z,1467008054.886 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T06:14:19.225Z,1467008059.225 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:14:19.228Z,1467008059.228 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:16:02.457Z,1467008162.457 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:16:15.245Z,1467008175.245 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T06:16:17.255Z,1467008177.255 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T06:16:20.171Z,1467008180.171 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:16:20.173Z,1467008180.173 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:16:22.126Z,1467008182.126 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:16:36.123Z,1467008196.123 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:16:50.128Z,1467008210.128 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:17:04.522Z,1467008224.522 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:17:04.542Z,1467008224.542 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T06:18:17.287Z,1467008297.287 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T06:18:19.300Z,1467008299.300 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T06:18:21.157Z,1467008301.157 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:18:21.158Z,1467008301.158 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:20:19.615Z,1467008419.615 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T06:20:21.630Z,1467008421.630 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T06:20:22.294Z,1467008422.294 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:20:22.296Z,1467008422.296 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:21:09.536Z,1467008469.536 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 144.338037 min 2016-06-27T06:21:15.951Z,1467008475.951 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T06:22:17.292Z,1467008537.292 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:22:21.802Z,1467008541.802 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T06:22:23.292Z,1467008543.292 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:22:23.295Z,1467008543.295 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:22:23.811Z,1467008543.811 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T06:22:31.700Z,1467008551.700 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:22:45.720Z,1467008565.720 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:23:00.105Z,1467008580.105 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:23:14.187Z,1467008594.187 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:23:14.207Z,1467008594.207 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T06:24:24.163Z,1467008664.163 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T06:24:24.382Z,1467008664.382 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:24:24.384Z,1467008664.384 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:24:24.425Z,1467008664.425 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T06:26:25.439Z,1467008785.439 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:26:25.441Z,1467008785.441 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:28:29.254Z,1467008909.254 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:28:29.260Z,1467008909.260 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:28:29.263Z,1467008909.263 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:28:43.298Z,1467008923.298 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:28:57.328Z,1467008937.328 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:29:11.717Z,1467008951.717 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:29:26.109Z,1467008966.109 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:29:26.129Z,1467008966.129 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T06:30:31.342Z,1467009031.342 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:30:31.365Z,1467009031.365 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:31:26.655Z,1467009086.655 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 154.623958 min 2016-06-27T06:31:35.548Z,1467009095.548 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T06:31:35.605Z,1467009095.605 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T06:32:32.010Z,1467009152.010 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:32:32.012Z,1467009152.012 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:34:24.369Z,1467009264.369 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T06:34:32.959Z,1467009272.959 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:34:32.962Z,1467009272.962 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:34:41.751Z,1467009281.751 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:34:56.164Z,1467009296.164 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:35:10.570Z,1467009310.570 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:35:24.973Z,1467009324.973 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:35:45.212Z,1467009345.212 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:35:45.264Z,1467009345.264 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T06:36:24.412Z,1467009384.412 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T06:36:26.822Z,1467009386.822 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T06:36:36.047Z,1467009396.047 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:36:36.049Z,1467009396.049 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:38:26.934Z,1467009506.934 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T06:38:28.944Z,1467009508.944 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T06:38:36.649Z,1467009516.649 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:38:36.651Z,1467009516.651 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:40:29.318Z,1467009629.318 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T06:40:31.330Z,1467009631.330 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T06:40:37.760Z,1467009637.760 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:40:37.762Z,1467009637.762 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:40:59.472Z,1467009659.472 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:41:13.862Z,1467009673.862 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:41:27.895Z,1467009687.895 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:41:42.286Z,1467009702.286 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:41:43.884Z,1467009703.884 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 164.911296 min 2016-06-27T06:41:59.589Z,1467009719.589 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:41:59.607Z,1467009719.607 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T06:42:31.356Z,1467009751.356 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T06:42:33.367Z,1467009753.367 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T06:42:38.771Z,1467009758.771 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:42:38.773Z,1467009758.773 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:43:49.414Z,1467009829.414 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T06:44:33.686Z,1467009873.686 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T06:44:33.890Z,1467009873.890 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T06:44:39.845Z,1467009879.845 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:44:39.847Z,1467009879.847 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:46:40.890Z,1467010000.890 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:46:40.892Z,1467010000.892 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:47:14.423Z,1467010034.423 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:47:28.807Z,1467010048.807 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:47:43.202Z,1467010063.202 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:47:57.604Z,1467010077.604 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:48:14.157Z,1467010094.157 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:48:14.178Z,1467010094.178 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T06:48:41.752Z,1467010121.752 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:48:41.754Z,1467010121.754 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:50:42.740Z,1467010242.740 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:50:42.745Z,1467010242.745 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:52:00.802Z,1467010320.802 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 175.193327 min 2016-06-27T06:52:43.665Z,1467010363.665 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:52:43.666Z,1467010363.666 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:53:27.326Z,1467010407.326 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:53:41.717Z,1467010421.717 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:53:56.120Z,1467010436.120 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:54:07.019Z,1467010447.019 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T06:54:10.221Z,1467010450.221 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:54:24.638Z,1467010464.638 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:54:24.657Z,1467010464.657 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T06:54:33.911Z,1467010473.911 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T06:54:44.650Z,1467010484.650 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:54:44.652Z,1467010484.652 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:56:34.244Z,1467010594.244 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T06:56:36.253Z,1467010596.253 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T06:56:45.749Z,1467010605.749 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:56:45.751Z,1467010605.751 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:58:36.581Z,1467010716.581 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T06:58:38.591Z,1467010718.591 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T06:58:46.703Z,1467010726.703 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:58:46.706Z,1467010726.706 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T06:59:37.581Z,1467010777.581 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T06:59:51.591Z,1467010791.591 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:00:05.988Z,1467010805.988 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:00:21.172Z,1467010821.172 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:00:35.325Z,1467010835.325 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:00:35.430Z,1467010835.430 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T07:00:38.614Z,1467010838.614 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T07:00:40.625Z,1467010840.625 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T07:00:47.743Z,1467010847.743 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:00:47.745Z,1467010847.745 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:02:17.861Z,1467010937.861 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 185.477132 min 2016-06-27T07:02:40.959Z,1467010960.959 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T07:02:42.974Z,1467010962.974 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T07:02:48.847Z,1467010968.847 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:02:48.849Z,1467010968.849 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:04:26.595Z,1467011066.595 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T07:04:43.353Z,1467011083.353 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T07:04:43.429Z,1467011083.429 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T07:04:49.803Z,1467011089.803 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:04:49.805Z,1467011089.805 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:05:49.630Z,1467011149.630 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-27T07:06:04.810Z,1467011164.810 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-27T07:06:21.626Z,1467011181.626 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:06:35.749Z,1467011195.749 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:06:50.160Z,1467011210.160 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:06:50.239Z,1467011210.239 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T07:06:50.683Z,1467011210.683 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:06:50.684Z,1467011210.684 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:08:51.402Z,1467011331.402 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:08:51.421Z,1467011331.421 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:10:52.447Z,1467011452.447 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:10:52.461Z,1467011452.461 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:12:02.915Z,1467011522.915 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:12:17.330Z,1467011537.330 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:12:31.708Z,1467011551.708 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:12:34.918Z,1467011554.918 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 195.762288 min 2016-06-27T07:12:48.618Z,1467011568.618 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:12:53.398Z,1467011573.398 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:12:53.399Z,1467011573.399 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:13:03.022Z,1467011583.022 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:13:03.070Z,1467011583.070 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T07:14:43.948Z,1467011683.948 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T07:14:43.972Z,1467011683.972 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T07:14:54.347Z,1467011694.347 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:14:54.349Z,1467011694.349 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:14:54.382Z,1467011694.382 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-06-27T07:14:54.382Z,1467011694.382 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-06-27T07:16:44.291Z,1467011804.291 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T07:16:46.301Z,1467011806.301 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T07:18:15.994Z,1467011895.994 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:18:30.011Z,1467011910.011 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:18:44.396Z,1467011924.396 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:18:46.693Z,1467011926.693 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T07:18:48.703Z,1467011928.703 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T07:18:58.466Z,1467011938.466 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:19:12.861Z,1467011952.861 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:19:12.879Z,1467011952.879 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T07:20:48.711Z,1467012048.711 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T07:20:50.721Z,1467012050.721 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T07:22:50.768Z,1467012170.768 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T07:22:51.967Z,1467012171.967 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 206.046045 min 2016-06-27T07:22:52.785Z,1467012172.785 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T07:24:25.816Z,1467012265.816 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:24:40.187Z,1467012280.187 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:24:53.188Z,1467012293.188 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T07:24:55.868Z,1467012295.868 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:24:55.886Z,1467012295.886 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T07:25:01.899Z,1467012301.899 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T07:25:01.949Z,1467012301.949 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T07:25:09.908Z,1467012309.908 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:25:24.315Z,1467012324.315 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:25:24.379Z,1467012324.379 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T07:30:37.099Z,1467012637.099 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:30:51.535Z,1467012651.535 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:31:05.929Z,1467012665.929 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:31:22.784Z,1467012682.784 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:31:37.189Z,1467012697.189 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:31:37.237Z,1467012697.237 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T07:31:55.195Z,1467012715.195 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:31:55.197Z,1467012715.197 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:33:08.893Z,1467012788.893 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 216.328971 min 2016-06-27T07:33:56.193Z,1467012836.193 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:33:56.195Z,1467012836.195 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:34:53.836Z,1467012893.836 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T07:35:57.189Z,1467012957.189 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:35:57.191Z,1467012957.191 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:36:50.082Z,1467013010.082 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:36:53.843Z,1467013013.843 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T07:36:55.853Z,1467013015.853 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T07:37:04.108Z,1467013024.108 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:37:14.593Z,1467013034.593 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T07:37:18.198Z,1467013038.198 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:37:32.615Z,1467013052.615 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:37:47.018Z,1467013067.018 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:37:47.061Z,1467013067.061 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T07:37:58.225Z,1467013078.225 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:37:58.227Z,1467013078.227 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:38:56.160Z,1467013136.160 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T07:38:58.170Z,1467013138.170 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T07:39:59.326Z,1467013199.326 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:39:59.328Z,1467013199.328 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:40:58.534Z,1467013258.534 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T07:41:00.544Z,1467013260.544 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T07:42:00.469Z,1467013320.469 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:42:00.470Z,1467013320.470 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:42:59.775Z,1467013379.775 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:43:00.871Z,1467013380.871 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T07:43:02.882Z,1467013382.882 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T07:43:14.150Z,1467013394.150 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:43:25.754Z,1467013405.754 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 226.609310 min 2016-06-27T07:43:29.403Z,1467013409.403 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:43:43.479Z,1467013423.479 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:43:57.854Z,1467013437.854 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:43:57.873Z,1467013437.873 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T07:44:01.476Z,1467013441.476 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:44:01.478Z,1467013441.478 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:45:02.913Z,1467013502.913 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T07:45:03.213Z,1467013503.213 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T07:46:02.489Z,1467013562.489 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:46:02.492Z,1467013562.492 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:47:34.329Z,1467013654.329 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T07:48:03.545Z,1467013683.545 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:48:03.546Z,1467013683.546 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:49:10.879Z,1467013750.879 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:49:24.904Z,1467013764.904 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:49:39.306Z,1467013779.306 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:49:56.187Z,1467013796.187 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:50:04.594Z,1467013804.594 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:50:04.596Z,1467013804.596 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:50:10.596Z,1467013810.596 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:50:10.615Z,1467013810.615 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T07:52:05.683Z,1467013925.683 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:52:05.685Z,1467013925.685 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:53:43.001Z,1467014023.001 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 236.896566 min 2016-06-27T07:54:06.712Z,1467014046.712 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:54:06.713Z,1467014046.713 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:55:03.111Z,1467014103.111 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T07:55:23.331Z,1467014123.331 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:55:37.685Z,1467014137.685 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:55:51.848Z,1467014151.848 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:56:06.226Z,1467014166.226 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:56:07.822Z,1467014167.822 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:56:07.824Z,1467014167.824 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:56:20.625Z,1467014180.625 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T07:56:20.645Z,1467014180.645 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T07:57:03.514Z,1467014223.514 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T07:57:05.524Z,1467014225.524 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T07:57:52.145Z,1467014272.145 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T07:58:08.967Z,1467014288.967 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:58:08.969Z,1467014288.969 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T07:59:05.895Z,1467014345.895 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T07:59:07.906Z,1467014347.906 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T08:00:09.947Z,1467014409.947 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:00:09.948Z,1467014409.948 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:01:08.233Z,1467014468.233 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T08:01:10.244Z,1467014470.244 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T08:01:33.255Z,1467014493.255 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:01:47.632Z,1467014507.632 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:02:03.284Z,1467014523.284 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:02:10.953Z,1467014530.953 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:02:10.955Z,1467014530.955 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:02:17.349Z,1467014537.349 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:02:31.776Z,1467014551.776 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:02:31.796Z,1467014551.796 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T08:03:10.571Z,1467014590.571 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T08:03:12.582Z,1467014592.582 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T08:04:00.334Z,1467014640.334 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 247.185384 min 2016-06-27T08:04:11.961Z,1467014651.961 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:04:11.963Z,1467014651.963 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:05:12.621Z,1467014712.621 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T08:05:12.912Z,1467014712.912 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T08:06:13.004Z,1467014773.004 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:06:13.006Z,1467014773.006 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:07:44.675Z,1467014864.675 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:07:59.075Z,1467014879.075 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:08:11.110Z,1467014891.110 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T08:08:13.921Z,1467014893.921 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:08:13.923Z,1467014893.923 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:08:16.314Z,1467014896.314 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:08:30.736Z,1467014910.736 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:08:45.143Z,1467014925.143 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:08:45.186Z,1467014925.186 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T08:10:15.040Z,1467015015.040 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:10:15.042Z,1467015015.042 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:12:16.121Z,1467015136.121 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:12:16.122Z,1467015136.122 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:13:58.165Z,1467015238.165 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:14:12.555Z,1467015252.555 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:14:16.982Z,1467015256.982 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:14:16.984Z,1467015256.984 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:14:20.205Z,1467015260.205 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 257.470150 min 2016-06-27T08:14:26.637Z,1467015266.637 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:14:41.039Z,1467015281.039 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:14:55.069Z,1467015295.069 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:14:55.116Z,1467015295.116 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T08:15:12.838Z,1467015312.838 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T08:16:20.553Z,1467015380.553 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:16:20.555Z,1467015380.555 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:17:13.165Z,1467015433.165 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T08:17:15.175Z,1467015435.175 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T08:18:21.206Z,1467015501.206 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:18:21.208Z,1467015501.208 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:18:29.969Z,1467015509.969 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T08:18:30.036Z,1467015510.036 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T08:19:15.259Z,1467015555.259 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T08:19:17.268Z,1467015557.268 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T08:20:08.134Z,1467015608.134 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:20:22.197Z,1467015622.197 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:20:22.198Z,1467015622.198 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:20:22.537Z,1467015622.537 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:20:36.581Z,1467015636.581 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:20:52.695Z,1467015652.695 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:21:07.085Z,1467015667.085 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:21:07.137Z,1467015667.137 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T08:21:17.316Z,1467015677.316 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T08:21:19.326Z,1467015679.326 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T08:22:23.165Z,1467015743.165 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:22:23.167Z,1467015743.167 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:23:19.682Z,1467015799.682 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T08:23:22.092Z,1467015802.092 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T08:24:24.337Z,1467015864.337 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:24:24.339Z,1467015864.339 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:24:39.092Z,1467015879.092 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 267.832764 min 2016-06-27T08:25:22.436Z,1467015922.436 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T08:25:22.497Z,1467015922.497 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T08:26:20.932Z,1467015980.932 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-27T08:26:25.368Z,1467015985.368 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:26:25.381Z,1467015985.381 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:26:36.109Z,1467015996.109 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-27T08:26:52.957Z,1467016012.957 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:27:07.371Z,1467016027.371 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:27:21.754Z,1467016041.754 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:27:21.805Z,1467016041.805 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T08:28:26.193Z,1467016106.193 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:28:26.194Z,1467016106.194 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:30:27.026Z,1467016227.026 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:30:27.032Z,1467016227.032 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:30:43.786Z,1467016243.786 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T08:32:27.946Z,1467016347.946 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:32:27.948Z,1467016347.948 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:32:34.752Z,1467016354.752 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:32:49.145Z,1467016369.145 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:33:03.267Z,1467016383.267 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:33:17.673Z,1467016397.673 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:33:32.079Z,1467016412.079 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:33:32.098Z,1467016412.098 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T08:34:29.006Z,1467016469.006 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:34:29.008Z,1467016469.008 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:34:59.089Z,1467016499.089 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 278.117057 min 2016-06-27T08:35:22.706Z,1467016522.706 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T08:36:30.140Z,1467016590.140 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:36:30.142Z,1467016590.142 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:37:22.750Z,1467016642.750 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T08:37:24.759Z,1467016644.759 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T08:38:31.206Z,1467016711.206 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:38:31.208Z,1467016711.208 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:38:45.205Z,1467016725.205 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:38:59.636Z,1467016739.636 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:39:13.678Z,1467016753.678 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:39:25.062Z,1467016765.062 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T08:39:27.073Z,1467016767.073 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T08:39:28.085Z,1467016768.085 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:39:42.117Z,1467016782.117 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:39:42.136Z,1467016782.136 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T08:40:32.190Z,1467016832.190 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:40:32.193Z,1467016832.193 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:41:01.681Z,1467016861.681 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T08:41:27.424Z,1467016887.424 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T08:41:29.451Z,1467016889.451 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T08:42:33.133Z,1467016953.133 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:42:33.135Z,1467016953.135 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:43:29.803Z,1467017009.803 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T08:43:31.816Z,1467017011.816 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T08:44:34.113Z,1467017074.113 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:44:34.114Z,1467017074.114 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:44:54.887Z,1467017094.887 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:45:09.317Z,1467017109.317 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:45:17.729Z,1467017117.729 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 288.475326 min 2016-06-27T08:45:23.412Z,1467017123.412 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:45:32.161Z,1467017132.161 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T08:45:32.488Z,1467017132.488 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T08:45:37.232Z,1467017137.232 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:45:51.603Z,1467017151.603 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:45:51.702Z,1467017151.702 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T08:46:34.959Z,1467017194.959 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:46:34.962Z,1467017194.962 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:48:35.886Z,1467017315.886 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:48:35.888Z,1467017315.888 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:50:38.398Z,1467017438.398 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:50:38.400Z,1467017438.400 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:51:04.499Z,1467017464.499 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:51:18.906Z,1467017478.906 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:51:23.294Z,1467017483.294 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T08:51:33.297Z,1467017493.297 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:51:47.385Z,1467017507.385 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:52:01.783Z,1467017521.783 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:52:01.803Z,1467017521.803 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T08:52:39.019Z,1467017559.019 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:52:39.022Z,1467017559.022 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:54:39.945Z,1467017679.945 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:54:39.947Z,1467017679.947 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:55:32.777Z,1467017732.777 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T08:55:42.082Z,1467017742.082 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 298.880469 min 2016-06-27T08:56:40.935Z,1467017800.935 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:56:40.937Z,1467017800.937 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:57:14.288Z,1467017834.288 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:57:28.660Z,1467017848.660 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:57:32.809Z,1467017852.809 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T08:57:34.823Z,1467017854.823 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T08:57:45.554Z,1467017865.554 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:57:59.656Z,1467017879.656 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:58:13.677Z,1467017893.677 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T08:58:13.733Z,1467017893.733 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T08:58:42.104Z,1467017922.104 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:58:42.106Z,1467017922.106 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T08:59:35.186Z,1467017975.186 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T08:59:37.197Z,1467017977.197 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T09:00:46.237Z,1467018046.237 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:00:46.239Z,1467018046.239 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:01:37.581Z,1467018097.581 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T09:01:39.591Z,1467018099.591 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T09:01:41.876Z,1467018101.876 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T09:02:46.856Z,1467018166.856 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:02:46.858Z,1467018166.858 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:03:26.618Z,1467018206.618 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:03:39.910Z,1467018219.910 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T09:03:41.018Z,1467018221.018 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:03:41.921Z,1467018221.921 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T09:03:55.047Z,1467018235.047 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:04:09.220Z,1467018249.220 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:04:23.627Z,1467018263.627 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:04:23.675Z,1467018263.675 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T09:04:48.039Z,1467018288.039 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:04:48.040Z,1467018288.040 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:05:42.267Z,1467018342.267 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T09:05:42.564Z,1467018342.564 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T09:05:59.315Z,1467018359.315 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 309.168587 min 2016-06-27T09:06:49.011Z,1467018409.011 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:06:49.012Z,1467018409.012 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:08:50.007Z,1467018530.007 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:08:50.009Z,1467018530.009 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:09:36.475Z,1467018576.475 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:09:50.866Z,1467018590.866 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:10:05.007Z,1467018605.007 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:10:19.402Z,1467018619.402 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:10:33.801Z,1467018633.801 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:10:33.892Z,1467018633.892 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T09:10:51.002Z,1467018651.002 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:10:51.004Z,1467018651.004 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:12:03.708Z,1467018723.708 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T09:12:03.756Z,1467018723.756 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T09:12:51.867Z,1467018771.867 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:12:51.869Z,1467018771.869 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:14:52.906Z,1467018892.906 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:14:52.912Z,1467018892.912 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:15:42.878Z,1467018942.878 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T09:15:46.623Z,1467018946.623 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:16:01.016Z,1467018961.016 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:16:15.438Z,1467018975.438 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:16:16.253Z,1467018976.253 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 319.452507 min 2016-06-27T09:16:31.942Z,1467018991.942 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:16:46.323Z,1467019006.323 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:16:46.410Z,1467019006.410 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T09:16:53.929Z,1467019013.929 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:16:53.931Z,1467019013.931 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:17:43.264Z,1467019063.264 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T09:17:45.680Z,1467019065.680 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T09:18:54.959Z,1467019134.959 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:18:54.961Z,1467019134.961 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:19:45.992Z,1467019185.992 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T09:19:48.006Z,1467019188.006 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T09:20:56.091Z,1467019256.091 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:20:56.093Z,1467019256.093 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:21:48.305Z,1467019308.305 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T09:21:50.315Z,1467019310.315 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T09:21:59.336Z,1467019319.336 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:22:13.738Z,1467019333.738 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:22:28.137Z,1467019348.137 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:22:42.331Z,1467019362.331 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:22:56.741Z,1467019376.741 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:22:56.760Z,1467019376.760 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T09:22:57.248Z,1467019377.248 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:22:57.250Z,1467019377.250 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:23:50.635Z,1467019430.635 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T09:23:52.645Z,1467019432.645 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T09:24:21.664Z,1467019461.664 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T09:24:58.231Z,1467019498.231 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:24:58.233Z,1467019498.233 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:25:53.001Z,1467019553.001 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T09:25:53.137Z,1467019553.137 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T09:26:33.516Z,1467019593.516 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 329.738672 min 2016-06-27T09:26:59.181Z,1467019619.181 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:26:59.183Z,1467019619.183 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:28:09.742Z,1467019689.742 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:28:23.764Z,1467019703.764 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:28:37.851Z,1467019717.851 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:28:51.826Z,1467019731.826 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:29:00.228Z,1467019740.228 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:29:00.230Z,1467019740.230 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:29:06.218Z,1467019746.218 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:29:06.293Z,1467019746.293 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T09:31:01.152Z,1467019861.152 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:31:01.154Z,1467019861.154 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:33:02.175Z,1467019982.175 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:33:02.177Z,1467019982.177 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:34:19.114Z,1467020059.114 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:34:33.499Z,1467020073.499 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:34:40.279Z,1467020080.279 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T09:34:47.892Z,1467020087.892 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:35:03.232Z,1467020103.232 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:35:03.234Z,1467020103.234 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:35:04.788Z,1467020104.788 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:35:19.227Z,1467020119.227 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:35:19.298Z,1467020119.298 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T09:35:54.044Z,1467020154.044 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T09:36:50.629Z,1467020210.629 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 340.023145 min 2016-06-27T09:37:04.293Z,1467020224.293 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:37:04.294Z,1467020224.294 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:37:54.063Z,1467020274.063 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T09:37:56.077Z,1467020276.077 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T09:39:05.339Z,1467020345.339 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:39:05.341Z,1467020345.341 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:39:56.413Z,1467020396.413 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T09:39:58.423Z,1467020398.423 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T09:40:32.337Z,1467020432.337 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:40:46.695Z,1467020446.695 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:41:00.878Z,1467020460.878 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:41:06.484Z,1467020466.484 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:41:06.486Z,1467020466.486 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:41:15.271Z,1467020475.271 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:41:29.273Z,1467020489.273 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:41:29.326Z,1467020489.326 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T09:41:58.798Z,1467020518.798 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T09:42:00.812Z,1467020520.812 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T09:43:07.424Z,1467020587.424 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:43:07.426Z,1467020587.426 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:44:00.984Z,1467020640.984 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T09:44:02.993Z,1467020642.993 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T09:44:58.122Z,1467020698.122 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T09:45:10.999Z,1467020710.999 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:45:11.001Z,1467020711.001 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T09:46:03.297Z,1467020763.297 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T09:46:03.530Z,1467020763.530 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T09:46:42.364Z,1467020802.364 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T09:46:57.579Z,1467020817.579 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-27T09:47:07.996Z,1467020827.996 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 350.313346 min 2016-06-27T09:48:11.593Z,1467020891.593 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T09:48:11.595Z,1467020891.595 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T09:51:12.403Z,1467021072.403 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T09:51:12.406Z,1467021072.406 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T09:54:13.414Z,1467021253.414 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T09:54:13.416Z,1467021253.416 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T09:54:34.402Z,1467021274.402 [CBIT](IMPORTANT): Beginning GF scan 2016-06-27T09:55:16.728Z,1467021316.728 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T09:56:03.611Z,1467021363.611 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T09:57:14.485Z,1467021434.485 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T09:57:14.487Z,1467021434.487 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T09:57:24.910Z,1467021444.910 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 360.595215 min 2016-06-27T09:58:03.946Z,1467021483.946 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T09:58:05.956Z,1467021485.956 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T10:00:06.292Z,1467021606.292 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T10:00:08.302Z,1467021608.302 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T10:00:15.356Z,1467021615.356 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:00:15.358Z,1467021615.358 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:02:08.702Z,1467021728.702 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T10:02:10.716Z,1467021730.716 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T10:03:16.243Z,1467021796.243 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:03:16.245Z,1467021796.245 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:04:11.088Z,1467021851.088 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T10:04:13.098Z,1467021853.098 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T10:05:35.327Z,1467021935.327 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T10:05:35.434Z,1467021935.434 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T10:06:13.114Z,1467021973.114 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T10:06:13.194Z,1467021973.194 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T10:06:17.104Z,1467021977.104 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:06:17.106Z,1467021977.106 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:07:42.779Z,1467022062.779 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 370.892741 min 2016-06-27T10:09:18.256Z,1467022158.256 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:09:18.258Z,1467022158.258 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:12:19.401Z,1467022339.401 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:12:19.408Z,1467022339.408 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:15:20.486Z,1467022520.486 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:15:20.490Z,1467022520.490 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:16:13.779Z,1467022573.779 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T10:17:48.303Z,1467022668.303 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T10:17:59.930Z,1467022679.930 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 381.178809 min 2016-06-27T10:18:13.795Z,1467022693.795 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T10:18:15.808Z,1467022695.808 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T10:18:21.334Z,1467022701.334 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:18:21.336Z,1467022701.336 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:20:16.140Z,1467022816.140 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T10:20:18.158Z,1467022818.158 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T10:21:22.211Z,1467022882.211 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:21:22.213Z,1467022882.213 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:22:18.225Z,1467022938.225 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T10:22:20.236Z,1467022940.236 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T10:24:20.583Z,1467023060.583 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T10:24:22.593Z,1467023062.593 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T10:24:23.266Z,1467023063.266 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:24:23.268Z,1467023063.268 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:26:22.939Z,1467023182.939 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T10:26:22.996Z,1467023182.996 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T10:27:24.307Z,1467023244.307 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:27:24.309Z,1467023244.309 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:28:05.868Z,1467023285.868 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T10:28:17.102Z,1467023297.102 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 391.464974 min 2016-06-27T10:30:25.336Z,1467023425.336 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:30:25.338Z,1467023425.338 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:33:26.735Z,1467023606.735 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:33:26.762Z,1467023606.762 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:36:23.206Z,1467023783.206 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T10:36:27.464Z,1467023787.464 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:36:27.470Z,1467023787.470 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:38:23.582Z,1467023903.582 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T10:38:24.492Z,1467023904.492 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T10:38:25.592Z,1467023905.592 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T10:38:34.565Z,1467023914.565 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 401.755208 min 2016-06-27T10:39:28.291Z,1467023968.291 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:39:28.293Z,1467023968.293 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:40:25.672Z,1467024025.672 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T10:40:27.685Z,1467024027.685 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T10:42:27.833Z,1467024147.833 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T10:42:29.284Z,1467024149.284 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:42:29.286Z,1467024149.286 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:42:29.843Z,1467024149.843 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T10:44:30.167Z,1467024270.167 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T10:44:32.176Z,1467024272.176 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T10:45:30.220Z,1467024330.220 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:45:30.222Z,1467024330.222 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:46:32.220Z,1467024392.220 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T10:46:32.316Z,1467024392.316 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T10:48:31.346Z,1467024511.346 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:48:31.364Z,1467024511.364 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:48:43.323Z,1467024523.323 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T10:48:51.754Z,1467024531.754 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 412.042676 min 2016-06-27T10:51:32.189Z,1467024692.189 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:51:32.223Z,1467024692.223 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:54:33.197Z,1467024873.197 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:54:33.199Z,1467024873.199 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:56:32.406Z,1467024992.406 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T10:57:34.019Z,1467025054.019 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:57:34.025Z,1467025054.025 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T10:58:32.780Z,1467025112.780 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T10:58:34.791Z,1467025114.791 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T10:59:02.952Z,1467025142.952 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T10:59:02.985Z,1467025142.985 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T10:59:08.974Z,1467025148.974 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 422.329395 min 2016-06-27T11:00:34.936Z,1467025234.936 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:00:34.941Z,1467025234.941 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:00:35.163Z,1467025235.163 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T11:00:37.183Z,1467025237.183 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T11:02:37.272Z,1467025357.272 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T11:02:39.286Z,1467025359.286 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T11:03:36.145Z,1467025416.145 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:03:36.147Z,1467025416.147 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:04:39.638Z,1467025479.638 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T11:04:41.659Z,1467025481.659 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T11:06:37.351Z,1467025597.351 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:06:37.353Z,1467025597.353 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:06:41.995Z,1467025601.995 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T11:06:42.197Z,1467025602.197 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T11:09:26.392Z,1467025766.392 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 432.619824 min 2016-06-27T11:09:38.417Z,1467025778.417 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:09:38.419Z,1467025778.419 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:11:16.993Z,1467025876.993 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T11:12:39.602Z,1467025959.602 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:12:39.604Z,1467025959.604 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:15:40.554Z,1467026140.554 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:15:40.556Z,1467026140.556 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:16:42.578Z,1467026202.578 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T11:18:41.659Z,1467026321.659 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:18:41.666Z,1467026321.666 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:18:42.616Z,1467026322.616 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T11:18:46.630Z,1467026326.630 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T11:19:43.382Z,1467026383.382 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 442.902539 min 2016-06-27T11:20:46.929Z,1467026446.929 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T11:20:48.939Z,1467026448.939 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T11:21:35.591Z,1467026495.591 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T11:21:42.800Z,1467026502.800 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:21:42.837Z,1467026502.837 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:22:49.270Z,1467026569.270 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T11:22:51.281Z,1467026571.281 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T11:24:43.998Z,1467026683.998 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:24:44.004Z,1467026684.004 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:24:44.025Z,1467026684.025 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-06-27T11:24:44.025Z,1467026684.025 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-06-27T11:24:51.676Z,1467026691.676 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T11:24:53.686Z,1467026693.686 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T11:26:53.778Z,1467026813.778 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T11:26:53.803Z,1467026813.803 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T11:30:00.956Z,1467027000.956 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 453.195215 min 2016-06-27T11:31:55.483Z,1467027115.483 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T11:36:54.444Z,1467027414.444 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T11:38:54.848Z,1467027534.848 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T11:38:56.858Z,1467027536.858 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T11:40:18.208Z,1467027618.208 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 463.483366 min 2016-06-27T11:40:57.198Z,1467027657.198 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T11:40:59.208Z,1467027659.208 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T11:42:13.095Z,1467027733.095 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T11:42:44.879Z,1467027764.879 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:42:44.881Z,1467027764.881 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:42:59.543Z,1467027779.543 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T11:43:01.553Z,1467027781.553 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T11:45:01.621Z,1467027901.621 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T11:45:03.631Z,1467027903.631 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T11:45:47.607Z,1467027947.607 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:45:47.609Z,1467027947.609 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:47:03.963Z,1467028023.963 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T11:47:04.230Z,1467028024.230 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T11:48:48.327Z,1467028128.327 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:48:48.329Z,1467028128.329 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:50:45.327Z,1467028245.327 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 473.934701 min 2016-06-27T11:51:49.083Z,1467028309.083 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:51:49.085Z,1467028309.085 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:52:31.049Z,1467028351.049 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T11:52:31.103Z,1467028351.103 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T11:54:50.081Z,1467028490.081 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:54:50.083Z,1467028490.083 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:57:04.965Z,1467028624.965 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T11:57:50.942Z,1467028670.942 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:57:50.944Z,1467028670.944 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T11:59:05.316Z,1467028745.316 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T11:59:07.327Z,1467028747.327 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T12:00:51.774Z,1467028851.774 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:00:51.776Z,1467028851.776 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:01:02.189Z,1467028862.189 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 484.216016 min 2016-06-27T12:01:07.702Z,1467028867.702 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T12:01:09.713Z,1467028869.713 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T12:03:10.068Z,1467028990.068 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T12:03:12.082Z,1467028992.082 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T12:03:52.627Z,1467029032.627 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:03:52.645Z,1467029032.645 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:04:43.569Z,1467029083.569 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T12:05:12.117Z,1467029112.117 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T12:05:14.135Z,1467029114.135 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T12:06:53.537Z,1467029213.537 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:06:53.539Z,1467029213.539 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:07:14.503Z,1467029234.503 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T12:07:14.748Z,1467029234.748 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T12:09:54.680Z,1467029394.680 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:09:54.702Z,1467029394.702 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:11:19.681Z,1467029479.681 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 494.507422 min 2016-06-27T12:12:55.567Z,1467029575.567 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:12:55.569Z,1467029575.569 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:15:02.487Z,1467029702.487 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T12:15:56.656Z,1467029756.656 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:15:56.658Z,1467029756.658 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:17:14.744Z,1467029834.744 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T12:18:57.765Z,1467029937.765 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:18:57.768Z,1467029937.768 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:19:15.128Z,1467029955.128 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T12:19:17.142Z,1467029957.142 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T12:21:17.489Z,1467030077.489 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T12:21:19.500Z,1467030079.500 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T12:21:36.861Z,1467030096.861 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 504.794336 min 2016-06-27T12:21:58.650Z,1467030118.650 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:21:58.652Z,1467030118.652 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:23:19.503Z,1467030199.503 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T12:23:21.513Z,1467030201.513 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T12:24:59.563Z,1467030299.563 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:24:59.582Z,1467030299.582 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:25:20.310Z,1467030320.310 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T12:25:21.556Z,1467030321.556 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T12:25:23.570Z,1467030323.570 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T12:27:23.609Z,1467030443.609 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T12:27:23.684Z,1467030443.684 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T12:28:00.556Z,1467030480.556 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:28:00.559Z,1467030480.559 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:31:01.664Z,1467030661.664 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:31:01.666Z,1467030661.666 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:31:54.100Z,1467030714.100 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 515.082096 min 2016-06-27T12:34:02.741Z,1467030842.741 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:34:02.743Z,1467030842.743 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:35:41.614Z,1467030941.614 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T12:37:03.624Z,1467031023.624 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:37:03.626Z,1467031023.626 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:37:23.883Z,1467031043.883 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T12:39:24.266Z,1467031164.266 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T12:39:26.276Z,1467031166.276 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T12:40:04.420Z,1467031204.420 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:40:04.422Z,1467031204.422 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:41:26.656Z,1467031286.656 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T12:41:28.667Z,1467031288.667 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T12:42:11.163Z,1467031331.163 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 525.366081 min 2016-06-27T12:43:05.247Z,1467031385.247 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:43:05.249Z,1467031385.249 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:43:28.698Z,1467031408.698 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T12:43:30.708Z,1467031410.708 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T12:45:31.052Z,1467031531.052 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T12:45:33.075Z,1467031533.075 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T12:45:59.211Z,1467031559.211 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T12:45:59.279Z,1467031559.279 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T12:46:06.432Z,1467031566.432 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:46:06.434Z,1467031566.434 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:47:33.297Z,1467031653.297 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T12:47:33.450Z,1467031653.450 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T12:49:07.575Z,1467031747.575 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:49:07.578Z,1467031747.578 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:52:08.377Z,1467031928.377 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:52:08.384Z,1467031928.384 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:52:28.413Z,1467031948.413 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 535.652930 min 2016-06-27T12:55:09.205Z,1467032109.205 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:55:09.211Z,1467032109.211 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:57:33.551Z,1467032253.551 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T12:58:10.286Z,1467032290.286 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:58:10.292Z,1467032290.292 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T12:58:11.823Z,1467032291.823 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T12:59:33.582Z,1467032373.582 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T12:59:35.592Z,1467032375.592 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T13:01:11.130Z,1467032471.130 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:01:11.132Z,1467032471.132 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:01:35.636Z,1467032495.636 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T13:01:37.645Z,1467032497.645 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T13:02:46.118Z,1467032566.118 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 545.948600 min 2016-06-27T13:03:37.969Z,1467032617.969 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T13:03:40.379Z,1467032620.379 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T13:04:12.043Z,1467032652.043 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:04:12.045Z,1467032652.045 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:05:40.682Z,1467032740.682 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T13:05:42.697Z,1467032742.697 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T13:07:13.032Z,1467032833.032 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:07:13.035Z,1467032833.035 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:07:43.056Z,1467032863.056 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T13:07:43.070Z,1467032863.070 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T13:08:30.426Z,1467032910.426 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T13:10:13.955Z,1467033013.955 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:10:13.957Z,1467033013.957 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:13:03.340Z,1467033183.340 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 556.235547 min 2016-06-27T13:13:15.058Z,1467033195.058 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:13:15.060Z,1467033195.060 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:16:16.151Z,1467033376.151 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:16:16.153Z,1467033376.153 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:17:43.270Z,1467033463.270 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T13:18:50.059Z,1467033530.059 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T13:19:17.294Z,1467033557.294 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:19:17.297Z,1467033557.297 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:19:43.657Z,1467033583.657 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T13:19:45.668Z,1467033585.668 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T13:21:45.976Z,1467033705.976 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T13:21:47.985Z,1467033707.985 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T13:22:18.466Z,1467033738.466 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:22:18.492Z,1467033738.492 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:23:20.624Z,1467033800.624 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 566.523698 min 2016-06-27T13:23:48.017Z,1467033828.017 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T13:23:50.027Z,1467033830.027 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T13:25:19.568Z,1467033919.568 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:25:19.579Z,1467033919.579 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:25:50.381Z,1467033950.381 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T13:25:52.409Z,1467033952.409 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T13:27:52.788Z,1467034072.788 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T13:27:53.145Z,1467034073.145 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T13:28:20.326Z,1467034100.326 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:28:20.328Z,1467034100.328 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:29:08.022Z,1467034148.022 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T13:31:21.417Z,1467034281.417 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:31:21.434Z,1467034281.434 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:33:38.026Z,1467034418.026 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 576.813802 min 2016-06-27T13:34:22.538Z,1467034462.538 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:34:22.540Z,1467034462.540 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:37:23.723Z,1467034643.723 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:37:23.733Z,1467034643.733 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:37:53.006Z,1467034673.006 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T13:39:27.473Z,1467034767.473 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T13:39:27.507Z,1467034767.507 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T13:39:53.317Z,1467034793.317 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T13:39:58.132Z,1467034798.132 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T13:40:24.882Z,1467034824.882 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:40:24.884Z,1467034824.884 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:41:58.470Z,1467034918.470 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T13:42:00.481Z,1467034920.481 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T13:43:25.717Z,1467035005.717 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:43:25.719Z,1467035005.719 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:43:55.322Z,1467035035.322 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 587.101888 min 2016-06-27T13:44:00.797Z,1467035040.797 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T13:44:02.807Z,1467035042.807 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T13:46:03.159Z,1467035163.159 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T13:46:05.169Z,1467035165.169 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T13:46:26.886Z,1467035186.886 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:46:26.888Z,1467035186.888 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:48:05.524Z,1467035285.524 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T13:48:05.645Z,1467035285.645 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T13:49:28.072Z,1467035368.072 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:49:28.074Z,1467035368.074 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:51:41.135Z,1467035501.135 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T13:52:29.274Z,1467035549.274 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:52:29.281Z,1467035549.281 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:54:12.665Z,1467035652.665 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 597.390560 min 2016-06-27T13:55:30.473Z,1467035730.473 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:55:30.475Z,1467035730.475 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:58:06.190Z,1467035886.190 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T13:58:31.309Z,1467035911.309 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T13:58:31.311Z,1467035911.311 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:00:06.218Z,1467036006.218 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T14:00:08.228Z,1467036008.228 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T14:01:32.888Z,1467036092.888 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:01:32.890Z,1467036092.890 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:01:59.726Z,1467036119.726 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T14:02:08.611Z,1467036128.611 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T14:02:10.622Z,1467036130.622 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T14:04:10.925Z,1467036250.925 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T14:04:12.939Z,1467036252.939 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T14:04:29.742Z,1467036269.742 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 607.674870 min 2016-06-27T14:04:33.526Z,1467036273.526 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:04:33.528Z,1467036273.528 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:06:13.331Z,1467036373.331 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T14:06:15.345Z,1467036375.345 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T14:07:34.669Z,1467036454.669 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:07:34.671Z,1467036454.671 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:08:15.725Z,1467036495.725 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T14:08:15.872Z,1467036495.872 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T14:10:35.877Z,1467036635.877 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:10:35.880Z,1467036635.880 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:12:17.568Z,1467036737.568 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T14:13:36.906Z,1467036816.906 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:13:36.907Z,1467036816.907 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:14:47.094Z,1467036887.094 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 617.964779 min 2016-06-27T14:16:37.768Z,1467036997.768 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:16:37.770Z,1467036997.770 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:18:15.946Z,1467037095.946 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T14:19:38.841Z,1467037178.841 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:19:38.859Z,1467037178.859 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:20:16.278Z,1467037216.278 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T14:20:18.688Z,1467037218.688 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T14:22:18.820Z,1467037338.820 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T14:22:20.829Z,1467037340.829 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T14:22:37.258Z,1467037357.258 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T14:22:39.698Z,1467037359.698 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:22:39.700Z,1467037359.700 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:24:20.893Z,1467037460.893 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T14:24:22.903Z,1467037462.903 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T14:25:04.436Z,1467037504.436 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 628.254688 min 2016-06-27T14:25:40.638Z,1467037540.638 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:25:40.645Z,1467037540.645 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:26:23.219Z,1467037583.219 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T14:26:25.228Z,1467037585.228 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T14:28:25.577Z,1467037705.577 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T14:28:25.862Z,1467037705.862 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T14:28:41.818Z,1467037721.818 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:28:41.820Z,1467037721.820 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:31:42.982Z,1467037902.982 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:31:42.985Z,1467037902.985 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:32:55.102Z,1467037975.102 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T14:32:55.136Z,1467037975.136 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T14:34:44.147Z,1467038084.147 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:34:44.150Z,1467038084.150 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:35:21.861Z,1467038121.861 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 638.542969 min 2016-06-27T14:37:44.958Z,1467038264.958 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:37:44.961Z,1467038264.961 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:38:26.170Z,1467038306.170 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T14:40:26.218Z,1467038426.218 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T14:40:30.243Z,1467038430.243 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T14:40:46.165Z,1467038446.165 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:40:46.175Z,1467038446.175 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:42:30.442Z,1467038550.442 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T14:42:32.457Z,1467038552.457 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T14:43:46.842Z,1467038626.842 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:43:46.844Z,1467038626.844 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:44:32.804Z,1467038672.804 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T14:44:34.814Z,1467038674.814 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T14:45:07.398Z,1467038707.398 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T14:45:49.835Z,1467038749.835 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 649.010482 min 2016-06-27T14:46:34.922Z,1467038794.922 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T14:46:36.931Z,1467038796.931 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T14:46:47.958Z,1467038807.958 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:46:47.961Z,1467038807.961 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:48:37.311Z,1467038917.311 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T14:48:37.543Z,1467038917.543 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T14:49:48.855Z,1467038988.855 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:49:48.857Z,1467038988.857 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:52:49.946Z,1467039169.946 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:52:49.948Z,1467039169.948 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:55:26.153Z,1467039326.153 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T14:55:50.987Z,1467039350.987 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:55:50.988Z,1467039350.988 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:56:06.994Z,1467039366.994 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 659.296680 min 2016-06-27T14:58:37.909Z,1467039517.909 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T14:58:52.018Z,1467039532.018 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T14:58:52.020Z,1467039532.020 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:00:37.981Z,1467039637.981 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T15:00:39.998Z,1467039639.998 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T15:01:53.053Z,1467039713.053 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:01:53.055Z,1467039713.055 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:02:40.225Z,1467039760.225 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T15:02:42.236Z,1467039762.236 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T15:04:42.243Z,1467039882.243 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T15:04:44.257Z,1467039884.257 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T15:04:53.976Z,1467039893.976 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:04:53.978Z,1467039893.978 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:05:45.041Z,1467039945.041 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T15:06:24.276Z,1467039984.276 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 669.584635 min 2016-06-27T15:06:44.260Z,1467040004.260 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T15:06:46.270Z,1467040006.270 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T15:07:54.995Z,1467040074.995 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:07:54.997Z,1467040074.997 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:08:46.674Z,1467040126.674 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T15:08:46.795Z,1467040126.795 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T15:10:55.925Z,1467040255.925 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:10:55.927Z,1467040255.927 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:13:57.037Z,1467040437.037 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:13:57.039Z,1467040437.039 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:16:02.919Z,1467040562.919 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T15:16:41.752Z,1467040601.752 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 679.876628 min 2016-06-27T15:16:57.920Z,1467040617.920 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:16:57.921Z,1467040617.921 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:18:47.304Z,1467040727.304 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T15:19:58.985Z,1467040798.985 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:19:58.991Z,1467040798.991 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:20:47.651Z,1467040847.651 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T15:20:49.662Z,1467040849.662 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T15:22:49.985Z,1467040969.985 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T15:22:52.003Z,1467040972.003 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T15:23:01.818Z,1467040981.818 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:23:01.820Z,1467040981.820 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:24:52.383Z,1467041092.383 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T15:24:54.393Z,1467041094.393 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T15:26:02.331Z,1467041162.331 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:26:02.333Z,1467041162.333 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:26:21.862Z,1467041181.862 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T15:26:21.924Z,1467041181.924 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T15:26:54.754Z,1467041214.754 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T15:26:56.763Z,1467041216.763 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T15:26:59.093Z,1467041219.093 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 690.164909 min 2016-06-27T15:28:56.810Z,1467041336.810 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T15:28:56.998Z,1467041336.998 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T15:29:03.450Z,1467041343.450 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:29:03.452Z,1467041343.452 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:32:04.000Z,1467041525.000 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:32:05.002Z,1467041525.002 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:35:08.687Z,1467041708.687 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:35:08.714Z,1467041708.714 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:37:16.123Z,1467041836.123 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 700.447786 min 2016-06-27T15:38:09.784Z,1467041889.784 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:38:09.786Z,1467041889.786 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:38:35.856Z,1467041915.856 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T15:38:57.505Z,1467041937.505 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T15:40:57.516Z,1467042057.516 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T15:40:59.525Z,1467042059.525 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T15:41:10.641Z,1467042070.641 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:41:10.643Z,1467042070.643 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:42:59.825Z,1467042179.825 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T15:43:01.836Z,1467042181.836 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T15:44:11.493Z,1467042251.493 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:44:11.495Z,1467042251.495 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:45:02.203Z,1467042302.203 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T15:45:04.213Z,1467042304.213 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T15:47:04.560Z,1467042424.560 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T15:47:06.570Z,1467042426.570 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T15:47:12.434Z,1467042432.434 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:47:12.436Z,1467042432.436 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:47:33.657Z,1467042453.657 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 710.740885 min 2016-06-27T15:48:53.578Z,1467042533.578 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T15:49:06.883Z,1467042546.883 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T15:49:07.259Z,1467042547.259 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T15:50:13.339Z,1467042613.339 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:50:13.341Z,1467042613.341 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T15:50:30.522Z,1467042630.522 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-27T15:50:50.902Z,1467042650.902 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T15:51:05.315Z,1467042665.315 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T15:51:19.714Z,1467042679.714 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T15:51:34.114Z,1467042694.114 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T15:51:34.135Z,1467042694.135 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T15:52:30.297Z,1467042750.297 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T15:52:30.299Z,1467042750.299 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T15:54:31.437Z,1467042871.437 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T15:54:31.439Z,1467042871.439 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T15:55:00.855Z,1467042900.855 [CBIT](IMPORTANT): Beginning GF scan 2016-06-27T15:56:32.580Z,1467042992.580 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T15:56:32.582Z,1467042992.582 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T15:56:46.985Z,1467043006.985 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T15:57:03.851Z,1467043023.851 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T15:57:18.253Z,1467043038.253 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T15:57:32.629Z,1467043052.629 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T15:57:47.034Z,1467043067.034 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T15:57:47.053Z,1467043067.053 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T15:57:50.648Z,1467043070.648 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 721.024544 min 2016-06-27T15:58:33.495Z,1467043113.495 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T15:58:33.497Z,1467043113.497 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T15:59:07.524Z,1467043147.524 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T15:59:11.585Z,1467043151.585 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T16:00:34.506Z,1467043234.506 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:00:34.545Z,1467043234.545 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:01:07.571Z,1467043267.571 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T16:01:09.582Z,1467043269.582 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T16:02:35.525Z,1467043355.525 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:02:35.527Z,1467043355.527 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:02:59.983Z,1467043379.983 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:03:09.897Z,1467043389.897 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T16:03:11.911Z,1467043391.911 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T16:03:16.153Z,1467043396.153 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:03:30.535Z,1467043410.535 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:03:44.914Z,1467043424.914 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:03:59.321Z,1467043439.321 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:03:59.339Z,1467043439.339 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T16:04:36.708Z,1467043476.708 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:04:36.710Z,1467043476.710 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:05:12.215Z,1467043512.215 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T16:05:14.225Z,1467043514.225 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T16:06:37.822Z,1467043597.822 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:06:37.824Z,1467043597.824 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:07:14.565Z,1467043634.565 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T16:07:16.574Z,1467043636.574 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T16:08:07.993Z,1467043687.993 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 731.312500 min 2016-06-27T16:08:38.877Z,1467043718.877 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:08:38.879Z,1467043718.879 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:09:11.792Z,1467043751.792 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:09:16.938Z,1467043756.938 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T16:09:17.031Z,1467043757.031 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T16:09:26.178Z,1467043766.178 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:09:30.154Z,1467043770.154 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T16:09:40.560Z,1467043780.560 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:09:54.582Z,1467043794.582 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:10:11.384Z,1467043811.384 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:10:11.402Z,1467043811.402 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T16:10:39.870Z,1467043839.870 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:10:39.872Z,1467043839.872 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:12:40.781Z,1467043960.781 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:12:40.783Z,1467043960.783 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:14:41.672Z,1467044081.672 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:14:41.674Z,1467044081.674 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:15:24.036Z,1467044124.036 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:15:41.728Z,1467044141.728 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:15:55.741Z,1467044155.741 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:16:10.128Z,1467044170.128 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:16:24.519Z,1467044184.519 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:16:24.539Z,1467044184.539 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T16:16:42.801Z,1467044202.801 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:16:42.803Z,1467044202.803 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:18:24.861Z,1467044304.861 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 741.594336 min 2016-06-27T16:18:43.746Z,1467044323.746 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:18:43.749Z,1467044323.749 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:19:17.204Z,1467044357.204 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T16:19:49.027Z,1467044389.027 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T16:19:49.075Z,1467044389.075 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T16:20:44.697Z,1467044444.697 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:20:44.703Z,1467044444.703 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:21:17.280Z,1467044477.280 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T16:21:19.289Z,1467044479.289 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T16:21:39.570Z,1467044499.570 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:21:53.977Z,1467044513.977 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:22:07.998Z,1467044527.998 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:22:22.370Z,1467044542.370 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:22:39.292Z,1467044559.292 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:22:39.336Z,1467044559.336 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T16:22:45.730Z,1467044565.730 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:22:45.732Z,1467044565.732 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:23:19.677Z,1467044599.677 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T16:23:21.691Z,1467044601.691 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T16:24:46.596Z,1467044686.596 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:24:46.598Z,1467044686.598 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:24:46.610Z,1467044686.610 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-06-27T16:24:46.610Z,1467044686.610 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-06-27T16:25:21.798Z,1467044721.798 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T16:25:23.828Z,1467044723.828 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T16:27:23.926Z,1467044843.926 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T16:27:25.938Z,1467044845.938 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T16:27:51.957Z,1467044871.957 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:28:05.982Z,1467044885.982 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:28:20.379Z,1467044900.379 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:28:34.390Z,1467044914.390 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:28:42.380Z,1467044922.380 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 751.886328 min 2016-06-27T16:28:48.487Z,1467044928.487 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:28:48.506Z,1467044928.506 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T16:29:26.249Z,1467044966.249 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T16:29:26.513Z,1467044966.513 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T16:32:01.262Z,1467045121.262 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T16:34:03.099Z,1467045243.099 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:34:17.483Z,1467045257.483 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:34:31.896Z,1467045271.896 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:34:46.298Z,1467045286.298 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:35:02.294Z,1467045302.294 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:35:02.392Z,1467045302.392 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T16:38:59.518Z,1467045539.518 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 762.171615 min 2016-06-27T16:39:26.530Z,1467045566.530 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T16:40:15.348Z,1467045615.348 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:40:29.771Z,1467045629.771 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:40:44.178Z,1467045644.178 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:40:58.556Z,1467045658.556 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:41:15.474Z,1467045675.474 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:41:15.494Z,1467045675.494 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T16:41:26.850Z,1467045686.850 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T16:41:28.860Z,1467045688.860 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T16:41:47.481Z,1467045707.481 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:41:47.483Z,1467045707.483 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:42:18.863Z,1467045738.863 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T16:43:29.196Z,1467045809.196 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T16:43:31.206Z,1467045811.206 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T16:43:48.703Z,1467045828.703 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:43:48.706Z,1467045828.706 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:45:31.526Z,1467045931.526 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T16:45:33.544Z,1467045933.544 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T16:45:49.629Z,1467045949.629 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:45:49.631Z,1467045949.631 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:46:30.539Z,1467045990.539 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:46:44.916Z,1467046004.916 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:46:59.326Z,1467046019.326 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:47:13.723Z,1467046033.723 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:47:30.664Z,1467046050.664 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:47:30.708Z,1467046050.708 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T16:47:33.771Z,1467046053.771 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T16:47:35.785Z,1467046055.785 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T16:47:50.694Z,1467046070.694 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:47:50.696Z,1467046070.696 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:49:16.810Z,1467046156.810 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 772.459570 min 2016-06-27T16:49:35.793Z,1467046175.793 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T16:49:36.153Z,1467046176.153 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T16:49:51.756Z,1467046191.756 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:49:51.758Z,1467046191.758 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:51:52.729Z,1467046312.729 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:51:52.730Z,1467046312.730 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:52:37.610Z,1467046357.610 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T16:52:43.613Z,1467046363.613 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:52:58.031Z,1467046378.031 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:53:12.423Z,1467046392.423 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:53:26.515Z,1467046406.515 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:53:40.536Z,1467046420.536 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:53:40.554Z,1467046420.554 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T16:53:53.720Z,1467046433.720 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:53:53.722Z,1467046433.722 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:55:54.575Z,1467046554.575 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:55:54.578Z,1467046554.578 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:57:55.612Z,1467046675.612 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:57:55.614Z,1467046675.614 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:58:53.298Z,1467046733.298 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:59:07.670Z,1467046747.670 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:59:22.075Z,1467046762.075 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:59:33.726Z,1467046773.726 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 782.741667 min 2016-06-27T16:59:36.876Z,1467046776.876 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:59:37.275Z,1467046777.275 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T16:59:50.968Z,1467046790.968 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T16:59:51.011Z,1467046791.011 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T16:59:56.578Z,1467046796.578 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T16:59:56.580Z,1467046796.580 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:01:37.300Z,1467046897.300 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T17:01:39.313Z,1467046899.313 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T17:01:57.383Z,1467046917.383 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:01:57.385Z,1467046917.385 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:02:55.453Z,1467046975.453 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T17:03:39.428Z,1467047019.428 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T17:03:41.438Z,1467047021.438 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T17:03:58.459Z,1467047038.459 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:03:58.461Z,1467047038.461 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:05:05.411Z,1467047105.411 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:05:19.803Z,1467047119.803 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:05:34.217Z,1467047134.217 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:05:41.466Z,1467047141.466 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T17:05:43.487Z,1467047143.487 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T17:05:48.591Z,1467047148.591 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:05:59.618Z,1467047159.618 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:05:59.621Z,1467047159.621 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:06:04.831Z,1467047164.831 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:06:04.851Z,1467047164.851 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T17:07:43.859Z,1467047263.859 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T17:07:45.873Z,1467047265.873 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T17:08:00.625Z,1467047280.625 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:08:00.627Z,1467047280.627 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:09:46.181Z,1467047386.181 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T17:09:46.309Z,1467047386.309 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T17:09:51.142Z,1467047391.142 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 793.031315 min 2016-06-27T17:10:01.554Z,1467047401.554 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:10:01.556Z,1467047401.556 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:11:17.645Z,1467047477.645 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:11:32.054Z,1467047492.054 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:11:46.068Z,1467047506.068 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:12:00.142Z,1467047520.142 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:12:02.563Z,1467047522.563 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:12:02.565Z,1467047522.565 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:12:14.540Z,1467047534.540 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:12:14.592Z,1467047534.592 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T17:13:14.625Z,1467047594.625 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T17:13:14.681Z,1467047594.681 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T17:14:03.518Z,1467047643.518 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:14:03.520Z,1467047643.520 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:16:04.565Z,1467047764.565 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:16:04.567Z,1467047764.567 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:17:27.530Z,1467047847.530 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:17:41.929Z,1467047861.929 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:17:55.968Z,1467047875.968 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:18:05.553Z,1467047885.553 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:18:05.583Z,1467047885.583 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:18:10.764Z,1467047890.764 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:18:24.423Z,1467047904.423 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:18:24.442Z,1467047904.442 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T17:19:46.807Z,1467047986.807 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T17:20:06.565Z,1467048006.565 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:20:06.567Z,1467048006.567 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:20:10.990Z,1467048010.990 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 803.316927 min 2016-06-27T17:21:46.830Z,1467048106.830 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T17:21:48.841Z,1467048108.841 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T17:22:07.381Z,1467048127.381 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:22:07.383Z,1467048127.383 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:23:37.218Z,1467048217.218 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:23:48.897Z,1467048228.897 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T17:23:50.909Z,1467048230.909 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T17:23:51.585Z,1467048231.585 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:24:05.991Z,1467048245.991 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:24:08.465Z,1467048248.465 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:24:08.467Z,1467048248.467 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:24:22.913Z,1467048262.913 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:24:37.292Z,1467048277.292 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:24:37.349Z,1467048277.349 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T17:25:32.041Z,1467048332.041 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T17:25:51.257Z,1467048351.257 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T17:25:53.275Z,1467048353.275 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T17:26:11.856Z,1467048371.856 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:26:11.858Z,1467048371.858 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:27:53.302Z,1467048473.302 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T17:27:55.316Z,1467048475.316 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T17:28:12.908Z,1467048492.908 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:28:12.910Z,1467048492.910 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:29:50.844Z,1467048590.844 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:29:55.717Z,1467048595.717 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T17:29:56.052Z,1467048596.052 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T17:30:05.212Z,1467048605.212 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:30:14.019Z,1467048614.019 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:30:14.022Z,1467048614.022 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:30:19.624Z,1467048619.624 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:30:34.045Z,1467048634.045 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:30:35.706Z,1467048635.706 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 813.774154 min 2016-06-27T17:30:55.301Z,1467048655.301 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-27T17:30:55.322Z,1467048655.322 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T17:32:55.174Z,1467048775.174 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:32:55.176Z,1467048775.176 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:34:56.170Z,1467048896.170 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:34:56.171Z,1467048896.171 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:35:55.518Z,1467048955.518 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T17:36:10.731Z,1467048970.731 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:36:25.161Z,1467048985.161 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:36:39.536Z,1467048999.536 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:36:53.934Z,1467049013.934 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:36:57.138Z,1467049017.138 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:36:57.140Z,1467049017.140 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:37:08.053Z,1467049028.053 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:37:08.102Z,1467049028.102 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T17:38:58.134Z,1467049138.134 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:38:58.136Z,1467049138.136 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:39:55.934Z,1467049195.934 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T17:40:59.263Z,1467049259.263 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:40:59.265Z,1467049259.265 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:41:02.890Z,1467049262.890 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 824.227148 min 2016-06-27T17:41:56.326Z,1467049316.326 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T17:41:58.336Z,1467049318.336 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T17:42:21.081Z,1467049341.081 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:42:35.449Z,1467049355.449 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:42:49.854Z,1467049369.854 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:43:00.280Z,1467049380.280 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:43:00.282Z,1467049380.282 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:43:06.295Z,1467049386.295 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:43:19.988Z,1467049399.988 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:43:20.061Z,1467049400.061 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T17:43:58.663Z,1467049438.663 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T17:44:00.673Z,1467049440.673 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T17:45:01.134Z,1467049501.134 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:45:01.136Z,1467049501.136 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:46:00.761Z,1467049560.761 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T17:46:02.770Z,1467049562.770 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T17:46:13.693Z,1467049573.693 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T17:47:02.122Z,1467049622.122 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:47:02.124Z,1467049622.124 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:48:02.862Z,1467049682.862 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T17:48:04.871Z,1467049684.871 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T17:48:35.538Z,1467049715.538 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:48:49.932Z,1467049729.932 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:49:03.115Z,1467049743.115 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:49:03.116Z,1467049743.116 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:49:04.306Z,1467049744.306 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:49:18.713Z,1467049758.713 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:49:36.032Z,1467049776.032 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:49:36.051Z,1467049776.051 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T17:50:05.223Z,1467049805.223 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T17:50:05.304Z,1467049805.304 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T17:51:04.070Z,1467049864.070 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:51:04.071Z,1467049864.071 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:51:23.680Z,1467049883.680 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 834.527539 min 2016-06-27T17:53:05.090Z,1467049985.090 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:53:05.092Z,1467049985.092 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:54:48.816Z,1467050088.816 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:55:02.834Z,1467050102.834 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:55:06.066Z,1467050106.066 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:55:06.067Z,1467050106.067 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:55:17.213Z,1467050117.213 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:55:37.836Z,1467050137.836 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:55:52.215Z,1467050152.215 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T17:55:52.259Z,1467050152.259 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T17:56:34.338Z,1467050194.338 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T17:57:07.171Z,1467050227.171 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:57:07.173Z,1467050227.173 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:59:08.144Z,1467050348.144 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T17:59:08.145Z,1467050348.145 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:00:05.445Z,1467050405.445 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T18:01:04.990Z,1467050464.990 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:01:09.027Z,1467050469.027 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:01:09.029Z,1467050469.029 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:01:19.009Z,1467050479.009 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:01:33.388Z,1467050493.388 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:01:45.055Z,1467050505.055 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 844.883268 min 2016-06-27T18:01:47.510Z,1467050507.510 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:02:01.909Z,1467050521.909 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:02:01.978Z,1467050521.978 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T18:02:05.828Z,1467050525.828 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T18:02:07.839Z,1467050527.839 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T18:03:10.058Z,1467050590.058 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:03:10.060Z,1467050590.060 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:04:08.230Z,1467050648.230 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T18:04:10.241Z,1467050650.241 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T18:05:11.111Z,1467050711.111 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:05:11.113Z,1467050711.113 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:06:10.629Z,1467050770.629 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T18:06:12.638Z,1467050772.638 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T18:06:51.610Z,1467050811.610 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T18:06:51.677Z,1467050811.677 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T18:07:11.991Z,1467050831.991 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:07:11.993Z,1467050831.993 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:07:17.171Z,1467050837.171 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:07:31.570Z,1467050851.570 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:07:45.971Z,1467050865.971 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:08:00.375Z,1467050880.375 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:08:13.002Z,1467050893.002 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T18:08:15.013Z,1467050895.013 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T18:08:17.278Z,1467050897.278 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:08:17.298Z,1467050897.298 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T18:09:13.018Z,1467050953.018 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:09:13.020Z,1467050953.020 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:10:15.300Z,1467051015.300 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T18:10:15.608Z,1467051015.608 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T18:11:14.101Z,1467051074.101 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:11:14.103Z,1467051074.103 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:12:03.727Z,1467051123.727 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 855.242188 min 2016-06-27T18:13:15.087Z,1467051195.087 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:13:15.089Z,1467051195.089 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:13:30.264Z,1467051210.264 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:13:44.658Z,1467051224.658 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:13:59.078Z,1467051239.078 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:14:13.202Z,1467051253.202 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:14:27.579Z,1467051267.579 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:14:27.598Z,1467051267.598 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T18:15:16.118Z,1467051316.118 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:15:16.120Z,1467051316.120 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:17:17.880Z,1467051437.880 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:17:17.882Z,1467051437.882 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:19:07.168Z,1467051547.168 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T18:19:18.380Z,1467051558.380 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:19:18.382Z,1467051558.382 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:19:40.537Z,1467051580.537 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:19:54.935Z,1467051594.935 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:20:09.313Z,1467051609.313 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:20:15.513Z,1467051615.513 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T18:20:27.589Z,1467051627.589 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:20:41.772Z,1467051641.772 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:20:41.846Z,1467051641.846 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T18:21:19.360Z,1467051679.360 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:21:19.362Z,1467051679.362 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:22:15.516Z,1467051735.516 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T18:22:17.526Z,1467051737.526 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T18:22:20.720Z,1467051740.720 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 865.525521 min 2016-06-27T18:23:20.443Z,1467051800.443 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:23:20.445Z,1467051800.445 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:24:17.622Z,1467051857.622 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T18:24:19.632Z,1467051859.632 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T18:25:27.928Z,1467051927.928 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:25:27.930Z,1467051927.930 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:25:54.790Z,1467051954.790 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:26:09.200Z,1467051969.200 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:26:19.692Z,1467051979.692 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T18:26:21.705Z,1467051981.705 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T18:26:24.813Z,1467051984.813 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:26:38.871Z,1467051998.871 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:26:53.261Z,1467052013.261 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:26:53.308Z,1467052013.308 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T18:27:30.301Z,1467052050.301 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:27:30.302Z,1467052050.302 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:28:22.069Z,1467052102.069 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T18:28:24.079Z,1467052104.079 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T18:29:26.593Z,1467052166.593 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T18:29:30.998Z,1467052170.998 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:29:30.999Z,1467052170.999 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:30:24.435Z,1467052224.435 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T18:30:24.777Z,1467052224.777 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T18:31:32.070Z,1467052292.070 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:31:32.072Z,1467052292.072 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:32:06.170Z,1467052326.170 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:32:20.584Z,1467052340.584 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:32:34.975Z,1467052354.975 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:32:38.179Z,1467052358.179 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 875.816732 min 2016-06-27T18:32:51.885Z,1467052371.885 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:33:06.283Z,1467052386.283 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:33:06.301Z,1467052386.301 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T18:33:33.094Z,1467052413.094 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:33:33.096Z,1467052413.096 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:35:34.065Z,1467052534.065 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:35:34.067Z,1467052534.067 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:37:34.897Z,1467052654.897 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:37:34.899Z,1467052654.899 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:38:19.337Z,1467052699.337 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:38:33.331Z,1467052713.331 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:38:47.712Z,1467052727.712 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:39:01.869Z,1467052741.869 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:39:02.673Z,1467052742.673 [PNI_TCM](FAULT): LCB fault: Current Limiter Activated. 2016-06-27T18:39:15.895Z,1467052755.895 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:39:15.968Z,1467052755.968 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T18:39:35.886Z,1467052775.886 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:39:35.888Z,1467052775.888 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:39:45.468Z,1467052785.468 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T18:40:24.708Z,1467052824.708 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T18:41:37.004Z,1467052897.004 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:41:37.005Z,1467052897.005 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:42:24.772Z,1467052944.772 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T18:42:26.781Z,1467052946.781 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T18:42:55.512Z,1467052975.512 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 886.104948 min 2016-06-27T18:43:38.013Z,1467053018.013 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:43:38.015Z,1467053018.015 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:44:27.144Z,1467053067.144 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T18:44:28.966Z,1467053068.966 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:44:29.155Z,1467053069.155 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T18:44:43.358Z,1467053083.358 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:44:59.017Z,1467053099.017 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:45:13.080Z,1467053113.080 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:45:27.120Z,1467053127.120 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:45:27.206Z,1467053127.206 [CBIT](CRITICAL): Data Fault in component: PNI_TCM 2016-06-27T18:45:39.191Z,1467053139.191 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:45:39.195Z,1467053139.195 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:46:29.500Z,1467053189.500 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T18:46:31.509Z,1467053191.509 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T18:47:40.103Z,1467053260.103 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:47:40.104Z,1467053260.104 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:48:31.556Z,1467053311.556 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T18:48:33.569Z,1467053313.569 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T18:49:41.151Z,1467053381.151 [DeadReckonUsingMultipleVelocitySources](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:49:41.153Z,1467053381.153 [DeadReckonUsingSpeedCalculator](FAULT): Unable to read the rotation from vehicle frame to navigation frame for more than 120 seconds. 2016-06-27T18:50:03.132Z,1467053403.132 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T18:50:33.901Z,1467053433.901 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T18:50:34.181Z,1467053434.181 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T18:50:40.138Z,1467053440.138 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:50:54.518Z,1467053454.518 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:51:08.905Z,1467053468.905 [PNI_TCM](FAULT): Failed to set parameters during initialization. 2016-06-27T18:51:27.029Z,1467053487.029 [PNI_TCM](FAULT): Failed to acquire valid data within timeout. 2016-06-27T18:52:41.973Z,1467053561.973 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T18:52:41.975Z,1467053561.975 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T18:53:12.799Z,1467053592.799 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 896.393490 min 2016-06-27T18:55:43.151Z,1467053743.151 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T18:55:43.157Z,1467053743.157 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T18:58:44.271Z,1467053924.271 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T18:58:44.273Z,1467053924.273 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:00:20.773Z,1467054020.773 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T19:00:20.861Z,1467054020.861 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T19:00:34.115Z,1467054034.115 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T19:01:45.287Z,1467054105.287 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:01:45.289Z,1467054105.289 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:02:34.482Z,1467054154.482 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T19:02:36.493Z,1467054156.493 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T19:03:29.840Z,1467054209.840 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 906.677409 min 2016-06-27T19:04:36.537Z,1467054276.537 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T19:04:38.554Z,1467054278.554 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T19:04:46.454Z,1467054286.454 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:04:46.456Z,1467054286.456 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:06:38.926Z,1467054398.926 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T19:06:40.940Z,1467054400.940 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T19:07:47.497Z,1467054467.497 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:07:47.503Z,1467054467.503 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:08:41.328Z,1467054521.328 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T19:08:44.539Z,1467054524.539 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T19:10:44.599Z,1467054644.599 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T19:10:44.780Z,1467054644.780 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T19:10:50.285Z,1467054650.285 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:10:50.287Z,1467054650.287 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:12:35.283Z,1467054755.283 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T19:13:47.402Z,1467054827.402 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 916.970573 min 2016-06-27T19:13:50.746Z,1467054830.746 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:13:50.749Z,1467054830.749 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:16:51.827Z,1467055011.827 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:16:51.828Z,1467055011.828 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:19:52.916Z,1467055192.916 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:19:52.919Z,1467055192.919 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:20:44.840Z,1467055244.840 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T19:22:44.896Z,1467055364.896 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T19:22:46.913Z,1467055366.913 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T19:22:54.058Z,1467055374.058 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T19:22:54.105Z,1467055374.105 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:22:54.108Z,1467055374.108 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:24:04.643Z,1467055444.643 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 927.257422 min 2016-06-27T19:24:47.249Z,1467055487.249 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T19:24:49.259Z,1467055489.259 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T19:25:54.971Z,1467055554.971 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:25:54.973Z,1467055554.973 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:26:49.607Z,1467055609.607 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T19:26:51.625Z,1467055611.625 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T19:28:51.980Z,1467055731.980 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T19:28:53.990Z,1467055733.990 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T19:28:55.843Z,1467055735.843 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:28:55.845Z,1467055735.845 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:30:54.294Z,1467055854.294 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T19:30:54.410Z,1467055854.410 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T19:31:56.874Z,1467055916.874 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:31:56.878Z,1467055916.878 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:33:12.645Z,1467055992.645 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T19:34:22.025Z,1467056062.025 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 937.547070 min 2016-06-27T19:34:57.744Z,1467056097.744 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:34:57.746Z,1467056097.746 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:37:58.709Z,1467056278.709 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:37:58.711Z,1467056278.711 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:40:54.956Z,1467056454.956 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T19:40:59.894Z,1467056459.894 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:40:59.900Z,1467056459.900 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:42:54.999Z,1467056574.999 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T19:42:57.013Z,1467056577.013 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T19:43:30.522Z,1467056610.522 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T19:44:00.686Z,1467056640.686 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:44:00.688Z,1467056640.688 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:44:39.111Z,1467056679.111 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 947.831836 min 2016-06-27T19:44:57.345Z,1467056697.345 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T19:44:59.355Z,1467056699.355 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T19:46:59.707Z,1467056819.707 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T19:47:01.637Z,1467056821.637 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:47:01.639Z,1467056821.639 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:47:01.721Z,1467056821.721 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T19:49:02.080Z,1467056942.080 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T19:49:04.090Z,1467056944.090 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T19:50:02.690Z,1467057002.690 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:50:02.691Z,1467057002.691 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:51:04.101Z,1467057064.101 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T19:51:04.435Z,1467057064.435 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T19:53:03.772Z,1467057183.772 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:53:03.774Z,1467057183.774 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:53:48.147Z,1467057228.147 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T19:53:48.210Z,1467057228.210 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T19:54:56.671Z,1467057296.671 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 958.124479 min 2016-06-27T19:56:04.934Z,1467057364.934 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:56:04.936Z,1467057364.936 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:59:06.062Z,1467057546.062 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T19:59:06.065Z,1467057546.065 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:01:04.355Z,1467057664.355 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T20:02:07.198Z,1467057727.198 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:02:07.201Z,1467057727.201 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:03:04.470Z,1467057784.470 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T20:03:06.480Z,1467057786.480 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T20:05:06.504Z,1467057906.504 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T20:05:08.046Z,1467057908.046 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:05:08.048Z,1467057908.048 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:05:08.514Z,1467057908.514 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T20:05:14.075Z,1467057914.075 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 968.413542 min 2016-06-27T20:06:01.785Z,1467057961.785 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T20:07:08.849Z,1467058028.849 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T20:07:10.859Z,1467058030.859 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T20:08:08.873Z,1467058088.873 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:08:08.876Z,1467058088.876 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:09:10.927Z,1467058150.927 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T20:09:12.945Z,1467058152.945 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T20:11:09.718Z,1467058269.718 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:11:09.720Z,1467058269.720 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:11:13.044Z,1467058273.044 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T20:11:13.333Z,1467058273.333 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T20:14:10.768Z,1467058450.768 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:14:10.786Z,1467058450.786 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:15:41.154Z,1467058541.154 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 978.762370 min 2016-06-27T20:16:18.791Z,1467058578.791 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T20:17:11.757Z,1467058631.757 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:17:11.759Z,1467058631.759 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:20:12.899Z,1467058812.899 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:20:12.901Z,1467058812.901 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:21:13.225Z,1467058873.225 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T20:23:13.578Z,1467058993.578 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T20:23:13.869Z,1467058993.869 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:23:13.871Z,1467058993.871 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:23:15.587Z,1467058995.587 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T20:25:15.927Z,1467059115.927 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T20:25:17.937Z,1467059117.937 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T20:26:04.578Z,1467059164.578 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 989.256055 min 2016-06-27T20:26:14.745Z,1467059174.745 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:26:14.746Z,1467059174.746 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:26:39.528Z,1467059199.528 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T20:27:18.264Z,1467059238.264 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T20:27:20.274Z,1467059240.274 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T20:29:16.001Z,1467059356.001 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:29:16.003Z,1467059356.003 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:29:20.630Z,1467059360.630 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T20:29:22.640Z,1467059362.640 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T20:31:23.040Z,1467059483.040 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T20:31:24.324Z,1467059484.324 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T20:32:16.805Z,1467059536.805 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:32:16.807Z,1467059536.807 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:35:17.971Z,1467059717.971 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:35:17.973Z,1467059717.973 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:36:21.954Z,1467059781.954 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 999.545833 min 2016-06-27T20:36:58.388Z,1467059818.388 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T20:38:18.973Z,1467059898.973 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:38:18.991Z,1467059898.991 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:38:19.025Z,1467059899.025 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-06-27T20:38:19.026Z,1467059899.026 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-06-27T20:41:23.694Z,1467060083.694 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T20:43:23.738Z,1467060203.738 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T20:43:25.756Z,1467060205.756 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T20:45:26.058Z,1467060326.058 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T20:45:28.089Z,1467060328.089 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T20:46:39.988Z,1467060399.988 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1009.846484 min 2016-06-27T20:47:15.745Z,1467060435.745 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T20:47:15.799Z,1467060435.799 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T20:47:28.337Z,1467060448.337 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T20:47:30.346Z,1467060450.346 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T20:49:30.722Z,1467060570.722 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T20:49:32.736Z,1467060572.736 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T20:51:33.132Z,1467060693.132 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T20:51:33.460Z,1467060693.460 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T20:56:20.079Z,1467060980.079 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:56:20.081Z,1467060980.081 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:56:57.294Z,1467061017.294 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1020.134896 min 2016-06-27T20:59:20.901Z,1467061160.901 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:59:20.903Z,1467061160.903 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T20:59:28.461Z,1467061168.461 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T21:01:33.370Z,1467061293.370 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T21:02:21.803Z,1467061341.803 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:02:21.809Z,1467061341.809 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:03:33.393Z,1467061413.393 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T21:03:35.402Z,1467061415.402 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T21:05:22.633Z,1467061522.633 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:05:22.635Z,1467061522.635 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:05:35.446Z,1467061535.446 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T21:05:37.472Z,1467061537.472 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T21:07:14.739Z,1467061634.739 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1030.425586 min 2016-06-27T21:07:37.676Z,1467061657.676 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T21:07:40.090Z,1467061660.090 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T21:08:23.797Z,1467061703.797 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:08:23.799Z,1467061703.799 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:09:40.410Z,1467061780.410 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T21:09:42.420Z,1467061782.420 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T21:09:48.281Z,1467061788.281 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T21:11:24.724Z,1467061884.724 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:11:24.726Z,1467061884.726 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:11:42.768Z,1467061902.768 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T21:11:43.141Z,1467061903.141 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T21:14:25.797Z,1467062065.797 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:14:25.799Z,1467062065.799 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:17:26.992Z,1467062246.992 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:17:26.994Z,1467062246.994 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:17:32.208Z,1467062252.208 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1040.716016 min 2016-06-27T21:20:07.166Z,1467062407.166 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T21:20:28.070Z,1467062428.070 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:20:28.072Z,1467062428.072 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:21:43.462Z,1467062503.462 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T21:23:29.069Z,1467062609.069 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:23:29.071Z,1467062609.071 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:23:43.512Z,1467062623.512 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T21:23:45.527Z,1467062625.527 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T21:25:45.570Z,1467062745.570 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T21:25:47.580Z,1467062747.580 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T21:26:30.116Z,1467062790.116 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:26:30.118Z,1467062790.118 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:27:47.639Z,1467062867.639 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T21:27:49.499Z,1467062869.499 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1051.005469 min 2016-06-27T21:27:49.649Z,1467062869.649 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T21:29:30.977Z,1467062970.977 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:29:30.979Z,1467062970.979 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:29:49.945Z,1467062989.945 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T21:29:53.157Z,1467062993.157 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T21:30:25.893Z,1467063025.893 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T21:31:53.488Z,1467063113.488 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T21:31:53.726Z,1467063113.726 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T21:32:32.074Z,1467063152.074 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:32:32.076Z,1467063152.076 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:35:33.210Z,1467063333.210 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:35:33.212Z,1467063333.212 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:38:06.670Z,1467063486.670 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1061.290951 min 2016-06-27T21:38:34.348Z,1467063514.348 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:38:34.350Z,1467063514.350 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:40:45.678Z,1467063645.678 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T21:40:45.786Z,1467063645.786 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T21:41:35.412Z,1467063695.412 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:41:35.414Z,1467063695.414 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:41:54.083Z,1467063714.083 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T21:43:54.228Z,1467063834.228 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T21:43:56.244Z,1467063836.244 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T21:44:36.360Z,1467063876.360 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:44:36.362Z,1467063876.362 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:45:56.615Z,1467063956.615 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T21:45:58.626Z,1467063958.626 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T21:47:37.184Z,1467064057.184 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:47:37.186Z,1467064057.186 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:47:58.981Z,1467064078.981 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T21:48:00.995Z,1467064080.995 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T21:48:23.985Z,1467064103.985 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1071.579753 min 2016-06-27T21:50:01.355Z,1467064201.355 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T21:50:03.365Z,1467064203.365 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T21:50:38.039Z,1467064238.039 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:50:38.041Z,1467064238.041 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:52:03.733Z,1467064323.733 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T21:52:03.820Z,1467064323.820 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T21:53:00.589Z,1467064380.589 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T21:53:38.898Z,1467064418.898 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:53:38.916Z,1467064418.916 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:55:27.395Z,1467064527.395 [CBIT](IMPORTANT): Beginning GF scan 2016-06-27T21:56:40.631Z,1467064600.631 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:56:40.662Z,1467064600.662 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:58:41.360Z,1467064721.360 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1081.868359 min 2016-06-27T21:59:44.584Z,1467064784.584 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T21:59:44.586Z,1467064784.586 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:02:04.411Z,1467064924.411 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T22:02:45.404Z,1467064965.404 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:02:45.407Z,1467064965.407 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:03:18.163Z,1467064998.163 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T22:04:04.815Z,1467065044.815 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T22:04:06.824Z,1467065046.824 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T22:05:46.313Z,1467065146.313 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:05:46.315Z,1467065146.315 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:06:06.868Z,1467065166.868 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T22:06:08.878Z,1467065168.878 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T22:08:09.233Z,1467065289.233 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T22:08:11.248Z,1467065291.248 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T22:08:47.117Z,1467065327.117 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:08:47.119Z,1467065327.119 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:08:58.760Z,1467065338.760 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1092.159505 min 2016-06-27T22:10:11.575Z,1467065411.575 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T22:10:13.586Z,1467065413.586 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T22:11:48.262Z,1467065508.262 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:11:48.264Z,1467065508.264 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:12:13.645Z,1467065533.645 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T22:12:13.678Z,1467065533.678 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T22:13:36.934Z,1467065616.934 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T22:14:49.391Z,1467065689.391 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:14:49.394Z,1467065689.394 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:17:50.540Z,1467065870.540 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:17:50.542Z,1467065870.542 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:19:15.820Z,1467065955.820 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1102.444141 min 2016-06-27T22:20:51.375Z,1467066051.375 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:20:51.377Z,1467066051.377 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:22:13.886Z,1467066133.886 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T22:23:52.036Z,1467066232.036 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:23:52.038Z,1467066232.038 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:23:54.800Z,1467066234.800 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T22:24:14.005Z,1467066254.005 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T22:24:16.028Z,1467066256.028 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T22:26:16.079Z,1467066376.079 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T22:26:18.093Z,1467066378.093 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T22:26:52.887Z,1467066412.887 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:26:52.889Z,1467066412.889 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:28:18.100Z,1467066498.100 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T22:28:20.110Z,1467066500.110 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T22:29:33.221Z,1467066573.221 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1112.732682 min 2016-06-27T22:29:53.725Z,1467066593.725 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:29:53.727Z,1467066593.727 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:30:20.169Z,1467066620.169 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T22:30:22.179Z,1467066622.179 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T22:32:22.390Z,1467066742.390 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T22:32:22.702Z,1467066742.702 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T22:32:54.842Z,1467066774.842 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:32:54.844Z,1467066774.844 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:34:12.538Z,1467066852.538 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T22:34:12.610Z,1467066852.610 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T22:35:55.988Z,1467066955.988 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:35:55.990Z,1467066955.990 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:38:56.801Z,1467067136.801 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:38:56.803Z,1467067136.803 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:39:50.388Z,1467067190.388 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1123.019922 min 2016-06-27T22:41:57.918Z,1467067317.918 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:41:57.920Z,1467067317.920 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:42:23.117Z,1467067343.117 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T22:44:23.136Z,1467067463.136 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T22:44:25.151Z,1467067465.151 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T22:44:59.756Z,1467067499.756 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:44:59.758Z,1467067499.758 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:46:24.837Z,1467067584.837 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T22:46:25.521Z,1467067585.521 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T22:46:27.531Z,1467067587.531 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T22:48:00.233Z,1467067680.233 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:48:00.236Z,1467067680.236 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:48:27.559Z,1467067707.559 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T22:48:29.569Z,1467067709.569 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T22:50:07.798Z,1467067807.798 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1133.309375 min 2016-06-27T22:50:29.585Z,1467067829.585 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T22:50:31.606Z,1467067831.606 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T22:51:01.126Z,1467067861.126 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:51:01.154Z,1467067861.154 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:52:31.649Z,1467067951.649 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T22:52:31.748Z,1467067951.748 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T22:54:02.222Z,1467068042.222 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:54:02.224Z,1467068042.224 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:56:42.511Z,1467068202.511 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T22:57:03.338Z,1467068223.338 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T22:57:03.340Z,1467068223.340 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:00:04.408Z,1467068404.408 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:00:04.409Z,1467068404.409 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:00:29.264Z,1467068429.264 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1143.666927 min 2016-06-27T23:02:33.137Z,1467068553.137 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T23:03:05.410Z,1467068585.410 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:03:05.412Z,1467068585.412 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:04:33.461Z,1467068673.461 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T23:04:35.470Z,1467068675.470 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T23:06:06.327Z,1467068766.327 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:06:06.329Z,1467068766.329 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:06:35.838Z,1467068795.838 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T23:06:37.848Z,1467068797.848 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T23:07:00.068Z,1467068820.068 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T23:08:37.866Z,1467068917.866 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T23:08:40.279Z,1467068920.279 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T23:09:07.170Z,1467068947.170 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:09:07.172Z,1467068947.172 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:10:40.579Z,1467069040.579 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T23:10:42.992Z,1467069042.992 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T23:10:56.488Z,1467069056.488 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1154.122135 min 2016-06-27T23:12:08.065Z,1467069128.065 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:12:08.067Z,1467069128.067 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:12:43.203Z,1467069163.203 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T23:12:43.266Z,1467069163.266 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T23:15:09.112Z,1467069309.112 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:15:09.114Z,1467069309.114 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:17:19.015Z,1467069439.015 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T23:18:10.227Z,1467069490.227 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:18:10.246Z,1467069490.246 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:21:11.385Z,1467069671.385 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:21:11.387Z,1467069671.387 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:21:13.830Z,1467069673.830 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1164.410417 min 2016-06-27T23:22:43.489Z,1467069763.489 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T23:24:12.537Z,1467069852.537 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:24:12.539Z,1467069852.539 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:24:43.505Z,1467069883.505 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T23:24:45.518Z,1467069885.518 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T23:26:45.887Z,1467070005.887 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T23:26:47.904Z,1467070007.904 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T23:27:13.401Z,1467070033.401 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:27:13.403Z,1467070033.403 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:27:36.697Z,1467070056.697 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T23:27:36.730Z,1467070056.730 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-27T23:28:48.248Z,1467070128.248 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T23:28:50.258Z,1467070130.258 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T23:30:14.518Z,1467070214.518 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:30:14.520Z,1467070214.520 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:30:50.310Z,1467070250.310 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T23:30:52.332Z,1467070252.332 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T23:31:31.270Z,1467070291.270 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1174.701172 min 2016-06-27T23:32:52.390Z,1467070372.390 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T23:32:52.812Z,1467070372.812 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T23:33:15.578Z,1467070395.578 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:33:15.580Z,1467070395.580 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:36:16.585Z,1467070576.585 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:36:16.587Z,1467070576.587 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:39:17.560Z,1467070757.560 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:39:17.562Z,1467070757.562 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:39:51.557Z,1467070791.557 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T23:41:48.482Z,1467070908.482 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1184.988021 min 2016-06-27T23:42:18.605Z,1467070938.605 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:42:18.607Z,1467070938.607 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:42:53.025Z,1467070973.025 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T23:44:53.136Z,1467071093.136 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T23:44:55.146Z,1467071095.146 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T23:45:19.487Z,1467071119.487 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:45:19.489Z,1467071119.489 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:46:55.498Z,1467071215.498 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T23:46:58.710Z,1467071218.710 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T23:48:20.574Z,1467071300.574 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:48:20.577Z,1467071300.577 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:48:58.744Z,1467071338.744 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T23:49:00.755Z,1467071340.755 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T23:50:11.219Z,1467071411.219 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-27T23:51:01.142Z,1467071461.142 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T23:51:03.153Z,1467071463.153 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-27T23:51:21.375Z,1467071481.375 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:51:21.377Z,1467071481.377 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:52:06.596Z,1467071526.596 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1195.289453 min 2016-06-27T23:53:03.252Z,1467071583.252 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-27T23:53:03.567Z,1467071583.567 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-27T23:54:22.191Z,1467071662.191 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:54:22.194Z,1467071662.194 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:57:26.004Z,1467071846.004 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-27T23:57:26.006Z,1467071846.006 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:00:30.085Z,1467072030.085 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:00:30.092Z,1467072030.092 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:00:32.132Z,1467072032.132 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T00:02:23.940Z,1467072143.940 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1205.578906 min 2016-06-28T00:03:03.469Z,1467072183.469 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T00:03:30.612Z,1467072210.612 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:03:30.614Z,1467072210.614 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:05:03.497Z,1467072303.497 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T00:05:05.507Z,1467072305.507 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T00:06:31.510Z,1467072391.510 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:06:31.512Z,1467072391.512 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:07:05.594Z,1467072425.594 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T00:07:07.604Z,1467072427.604 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T00:09:07.943Z,1467072547.943 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T00:09:09.957Z,1467072549.957 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T00:09:32.340Z,1467072572.340 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:09:32.342Z,1467072572.342 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:10:50.779Z,1467072650.779 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T00:11:10.333Z,1467072670.333 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T00:11:12.343Z,1467072672.343 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T00:12:33.385Z,1467072753.385 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:12:33.387Z,1467072753.387 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:12:41.347Z,1467072761.347 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1215.869401 min 2016-06-28T00:13:12.403Z,1467072792.403 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T00:13:12.792Z,1467072792.792 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-28T00:15:34.199Z,1467072934.199 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:15:34.209Z,1467072934.209 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:18:35.108Z,1467073115.108 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:18:35.110Z,1467073115.110 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:21:10.652Z,1467073270.652 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T00:21:10.685Z,1467073270.685 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-28T00:21:36.283Z,1467073296.283 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:21:36.285Z,1467073296.285 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:22:58.804Z,1467073378.804 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1226.159505 min 2016-06-28T00:23:12.612Z,1467073392.612 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T00:24:37.496Z,1467073477.496 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:24:37.498Z,1467073477.498 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:25:12.959Z,1467073512.959 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T00:25:14.970Z,1467073514.970 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T00:27:15.089Z,1467073635.089 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T00:27:17.099Z,1467073637.099 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T00:27:38.654Z,1467073658.654 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:27:38.656Z,1467073658.656 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:29:17.444Z,1467073757.444 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T00:29:19.457Z,1467073759.457 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T00:30:39.752Z,1467073839.752 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:30:39.758Z,1467073839.758 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:31:19.465Z,1467073879.465 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T00:31:21.879Z,1467073881.879 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T00:33:16.088Z,1467073996.088 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1236.447656 min 2016-06-28T00:33:21.886Z,1467074001.886 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T00:33:22.259Z,1467074002.259 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-28T00:33:23.008Z,1467074003.008 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T00:33:40.651Z,1467074020.651 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:33:40.671Z,1467074020.671 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:36:41.540Z,1467074201.540 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:36:41.542Z,1467074201.542 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:39:42.375Z,1467074382.375 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:39:42.377Z,1467074382.377 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:42:43.333Z,1467074563.333 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:42:43.335Z,1467074563.335 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:43:22.548Z,1467074602.548 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T00:43:33.845Z,1467074613.845 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1246.742969 min 2016-06-28T00:43:40.222Z,1467074620.222 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T00:45:22.924Z,1467074722.924 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T00:45:24.945Z,1467074724.945 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T00:45:44.470Z,1467074744.470 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:45:44.476Z,1467074744.476 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:47:24.953Z,1467074844.953 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T00:47:26.963Z,1467074846.963 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T00:48:48.398Z,1467074928.398 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:48:48.404Z,1467074928.404 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:49:26.978Z,1467074966.978 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T00:49:28.988Z,1467074968.988 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T00:51:29.299Z,1467075089.299 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T00:51:31.309Z,1467075091.309 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T00:51:49.188Z,1467075109.188 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:51:49.190Z,1467075109.190 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:53:31.634Z,1467075211.634 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T00:53:31.954Z,1467075211.954 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-28T00:53:51.548Z,1467075231.548 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1257.038542 min 2016-06-28T00:53:59.955Z,1467075239.955 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T00:54:50.018Z,1467075290.018 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:54:50.020Z,1467075290.020 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:57:51.037Z,1467075471.037 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T00:57:51.039Z,1467075471.039 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:00:51.904Z,1467075651.904 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:00:51.910Z,1467075651.910 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:03:31.835Z,1467075811.835 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T01:03:52.916Z,1467075832.916 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:03:52.919Z,1467075832.919 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:04:08.514Z,1467075848.514 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1267.322396 min 2016-06-28T01:04:19.822Z,1467075859.822 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T01:05:32.196Z,1467075932.196 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T01:05:34.218Z,1467075934.218 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T01:06:54.093Z,1467076014.093 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:06:54.095Z,1467076014.095 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:07:34.452Z,1467076054.452 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T01:07:36.462Z,1467076056.462 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T01:09:36.857Z,1467076176.857 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T01:09:38.867Z,1467076178.867 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T01:09:55.135Z,1467076195.135 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:09:55.137Z,1467076195.137 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:11:39.227Z,1467076299.227 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T01:11:41.242Z,1467076301.242 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T01:12:56.019Z,1467076376.019 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:12:56.022Z,1467076376.022 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:13:41.622Z,1467076421.622 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T01:13:41.763Z,1467076421.763 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-28T01:14:26.196Z,1467076466.196 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1277.615885 min 2016-06-28T01:14:38.590Z,1467076478.590 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T01:14:38.623Z,1467076478.623 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-28T01:15:57.126Z,1467076557.126 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:15:57.128Z,1467076557.128 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:18:58.232Z,1467076738.232 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:18:58.234Z,1467076738.234 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:21:59.287Z,1467076919.287 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:21:59.293Z,1467076919.293 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:23:41.874Z,1467077021.874 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T01:24:43.420Z,1467077083.420 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1287.904687 min 2016-06-28T01:25:00.402Z,1467077100.402 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:25:00.421Z,1467077100.421 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:25:41.979Z,1467077141.979 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T01:25:43.996Z,1467077143.996 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T01:26:53.217Z,1467077213.217 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T01:27:44.255Z,1467077264.255 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T01:27:47.868Z,1467077267.868 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T01:28:01.361Z,1467077281.361 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:28:01.364Z,1467077281.364 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:29:48.152Z,1467077388.152 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T01:29:50.166Z,1467077390.166 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T01:31:03.926Z,1467077463.926 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:31:03.932Z,1467077463.932 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:31:50.525Z,1467077510.525 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T01:31:52.536Z,1467077512.536 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T01:33:52.899Z,1467077632.899 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T01:33:53.184Z,1467077633.184 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-28T01:34:04.488Z,1467077644.488 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:34:04.490Z,1467077644.490 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:35:01.260Z,1467077701.260 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1298.200781 min 2016-06-28T01:37:05.585Z,1467077825.585 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:37:05.586Z,1467077825.586 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:37:13.122Z,1467077833.122 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T01:40:07.240Z,1467078007.240 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:40:07.242Z,1467078007.242 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:43:10.760Z,1467078190.760 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:43:10.762Z,1467078190.762 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:43:53.509Z,1467078233.509 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T01:45:18.209Z,1467078318.209 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1308.483464 min 2016-06-28T01:45:53.616Z,1467078353.616 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T01:45:55.627Z,1467078355.627 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T01:46:11.681Z,1467078371.681 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:46:11.683Z,1467078371.683 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:47:30.337Z,1467078450.337 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T01:47:55.654Z,1467078475.654 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T01:47:57.664Z,1467078477.664 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T01:49:12.527Z,1467078552.527 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:49:12.529Z,1467078552.529 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:49:58.012Z,1467078598.012 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T01:50:00.026Z,1467078600.026 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T01:52:00.377Z,1467078720.377 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T01:52:02.387Z,1467078722.387 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T01:52:13.567Z,1467078733.567 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:52:13.569Z,1467078733.569 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:54:02.415Z,1467078842.415 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T01:54:02.756Z,1467078842.756 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-28T01:55:14.460Z,1467078914.460 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:55:14.462Z,1467078914.462 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T01:55:14.474Z,1467078914.474 [CBIT](FAULT): Software Fault in component: DeadReckonUsingMultipleVelocitySources 2016-06-28T01:55:14.474Z,1467078914.474 [CBIT](FAULT): Software Fault in component: DeadReckonUsingSpeedCalculator 2016-06-28T01:55:44.538Z,1467078944.538 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1318.922135 min 2016-06-28T01:57:48.397Z,1467079068.397 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T02:04:02.680Z,1467079442.680 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T02:06:02.831Z,1467079562.831 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T02:06:04.842Z,1467079564.842 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T02:06:05.507Z,1467079565.507 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1329.272005 min 2016-06-28T02:08:05.225Z,1467079685.225 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T02:08:09.243Z,1467079689.243 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T02:08:09.500Z,1467079689.500 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T02:08:09.531Z,1467079689.531 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-28T02:10:09.582Z,1467079809.582 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T02:10:11.592Z,1467079811.592 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T02:12:11.932Z,1467079931.932 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T02:12:13.941Z,1467079933.941 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T02:13:15.112Z,1467079995.112 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:13:15.114Z,1467079995.114 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:14:13.981Z,1467080053.981 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T02:14:14.141Z,1467080054.141 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-28T02:16:16.028Z,1467080176.028 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:16:16.030Z,1467080176.030 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:16:22.840Z,1467080182.840 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1339.561198 min 2016-06-28T02:19:17.160Z,1467080357.160 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:19:17.166Z,1467080357.166 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:20:22.837Z,1467080422.837 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T02:22:18.029Z,1467080538.029 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:22:18.031Z,1467080538.031 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:24:14.611Z,1467080654.611 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T02:25:18.933Z,1467080718.933 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:25:18.975Z,1467080718.975 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:26:14.732Z,1467080774.732 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T02:26:16.744Z,1467080776.744 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T02:26:40.046Z,1467080800.046 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1349.847396 min 2016-06-28T02:28:16.820Z,1467080896.820 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T02:28:18.829Z,1467080898.829 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T02:28:19.977Z,1467080899.977 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:28:19.979Z,1467080899.979 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:30:19.137Z,1467081019.137 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T02:30:21.156Z,1467081021.156 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T02:30:48.146Z,1467081048.146 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T02:31:20.975Z,1467081080.975 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:31:20.977Z,1467081080.977 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:32:21.383Z,1467081141.383 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T02:32:23.400Z,1467081143.400 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T02:34:22.110Z,1467081262.110 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:34:22.112Z,1467081262.112 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:34:23.765Z,1467081263.765 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T02:34:24.155Z,1467081264.155 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-28T02:36:57.887Z,1467081417.887 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1360.144531 min 2016-06-28T02:37:23.212Z,1467081443.212 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:37:23.215Z,1467081443.215 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:40:24.102Z,1467081624.102 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:40:24.104Z,1467081624.104 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:41:06.886Z,1467081666.886 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T02:43:25.117Z,1467081805.117 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:43:25.135Z,1467081805.135 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:44:24.375Z,1467081864.375 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T02:46:24.474Z,1467081984.474 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T02:46:26.295Z,1467081986.295 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:46:26.297Z,1467081986.297 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:46:26.483Z,1467081986.483 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T02:47:15.105Z,1467082035.105 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1370.431510 min 2016-06-28T02:48:26.486Z,1467082106.486 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T02:48:28.501Z,1467082108.501 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T02:49:27.199Z,1467082167.199 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:49:27.201Z,1467082167.201 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:50:28.527Z,1467082228.527 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T02:50:30.562Z,1467082230.562 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T02:51:24.624Z,1467082284.624 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T02:52:29.793Z,1467082349.793 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:52:29.795Z,1467082349.795 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:52:30.834Z,1467082350.834 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T02:52:35.248Z,1467082355.248 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T02:54:35.284Z,1467082475.284 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T02:54:35.621Z,1467082475.621 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-28T02:55:30.561Z,1467082530.561 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:55:30.587Z,1467082530.587 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:57:32.736Z,1467082652.736 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1380.725911 min 2016-06-28T02:58:31.705Z,1467082711.705 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T02:58:31.707Z,1467082711.707 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:01:32.651Z,1467082892.651 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:01:32.653Z,1467082892.653 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:01:42.381Z,1467082902.381 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T03:01:42.479Z,1467082902.479 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-28T03:04:33.481Z,1467083073.481 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:04:33.483Z,1467083073.483 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:04:35.532Z,1467083075.532 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T03:06:35.860Z,1467083195.860 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T03:06:38.270Z,1467083198.270 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T03:07:34.460Z,1467083254.460 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:07:34.462Z,1467083254.462 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:07:50.106Z,1467083270.106 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1391.015104 min 2016-06-28T03:08:38.290Z,1467083318.290 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T03:08:40.300Z,1467083320.300 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T03:10:35.325Z,1467083435.325 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:10:35.335Z,1467083435.335 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:10:40.703Z,1467083440.703 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T03:10:42.722Z,1467083442.722 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T03:12:43.013Z,1467083563.013 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T03:12:45.024Z,1467083565.024 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T03:13:36.417Z,1467083616.417 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:13:36.419Z,1467083616.419 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:13:55.181Z,1467083635.181 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T03:14:45.382Z,1467083685.382 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T03:14:45.788Z,1467083685.788 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-28T03:16:37.569Z,1467083797.569 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:16:37.571Z,1467083797.571 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:18:07.752Z,1467083887.752 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1401.308724 min 2016-06-28T03:19:38.425Z,1467083978.425 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:19:38.427Z,1467083978.427 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:22:39.623Z,1467084159.623 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:22:39.625Z,1467084159.625 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:24:12.547Z,1467084252.547 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T03:24:45.629Z,1467084285.629 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T03:25:40.613Z,1467084340.613 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:25:40.615Z,1467084340.615 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:26:45.659Z,1467084405.659 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T03:26:47.670Z,1467084407.670 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T03:28:25.201Z,1467084505.201 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1411.599089 min 2016-06-28T03:28:41.700Z,1467084521.700 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:28:41.702Z,1467084521.702 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:28:48.067Z,1467084528.067 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T03:28:50.087Z,1467084530.087 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T03:30:50.411Z,1467084650.411 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T03:30:52.421Z,1467084652.421 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T03:31:42.861Z,1467084702.861 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:31:42.863Z,1467084702.863 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:32:52.749Z,1467084772.749 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T03:32:54.759Z,1467084774.759 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T03:34:30.389Z,1467084870.389 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T03:34:45.256Z,1467084885.256 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:34:45.258Z,1467084885.258 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:34:55.058Z,1467084895.058 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T03:34:55.349Z,1467084895.349 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-28T03:37:45.887Z,1467085065.887 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:37:45.889Z,1467085065.889 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:38:42.371Z,1467085122.371 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1421.886328 min 2016-06-28T03:40:49.665Z,1467085249.665 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:40:49.667Z,1467085249.667 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:43:52.096Z,1467085432.096 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:43:52.098Z,1467085432.098 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:44:48.978Z,1467085488.978 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T03:44:55.665Z,1467085495.665 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T03:46:52.768Z,1467085612.768 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:46:52.770Z,1467085612.770 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:46:55.720Z,1467085615.720 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T03:46:57.729Z,1467085617.729 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T03:48:58.125Z,1467085738.125 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T03:48:59.852Z,1467085739.852 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1432.177865 min 2016-06-28T03:49:00.135Z,1467085740.135 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T03:49:53.977Z,1467085793.977 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:49:53.979Z,1467085793.979 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:51:00.439Z,1467085860.439 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T03:51:03.651Z,1467085863.651 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T03:52:54.784Z,1467085974.784 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:52:54.786Z,1467085974.786 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:53:04.002Z,1467085984.002 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T03:53:06.012Z,1467085986.012 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T03:55:06.384Z,1467086106.384 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T03:55:06.488Z,1467086106.488 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-28T03:55:07.641Z,1467086107.641 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T03:55:07.698Z,1467086107.698 [CBIT](CRITICAL): Data Fault in component: NAL9602 2016-06-28T03:55:55.975Z,1467086155.975 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:55:55.977Z,1467086155.977 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:55:58.390Z,1467086158.390 [CBIT](IMPORTANT): Beginning GF scan 2016-06-28T03:58:57.088Z,1467086337.088 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:58:57.105Z,1467086337.105 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T03:59:17.520Z,1467086357.520 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1442.472135 min 2016-06-28T04:01:58.058Z,1467086518.058 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:01:58.060Z,1467086518.060 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:04:58.955Z,1467086698.955 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:04:58.957Z,1467086698.957 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:05:06.662Z,1467086706.662 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T04:07:06.989Z,1467086826.989 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T04:07:08.999Z,1467086828.999 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T04:07:24.389Z,1467086844.389 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T04:07:59.826Z,1467086879.826 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:07:59.828Z,1467086879.828 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:09:09.327Z,1467086949.327 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T04:09:11.341Z,1467086951.341 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T04:09:34.807Z,1467086974.807 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1452.760026 min 2016-06-28T04:11:00.828Z,1467087060.828 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:11:00.835Z,1467087060.835 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:11:11.681Z,1467087071.681 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T04:11:13.699Z,1467087073.699 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T04:13:14.062Z,1467087194.062 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T04:13:16.073Z,1467087196.073 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T04:14:01.669Z,1467087241.669 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:14:01.671Z,1467087241.671 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:15:16.420Z,1467087316.420 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T04:15:16.520Z,1467087316.520 [CBIT](FAULT): Communications Fault in component: Rowe_600LCM 2016-06-28T04:17:02.778Z,1467087422.778 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:17:02.784Z,1467087422.784 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:17:43.140Z,1467087463.140 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T04:19:52.183Z,1467087592.183 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1463.049870 min 2016-06-28T04:20:03.851Z,1467087603.851 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:20:03.869Z,1467087603.869 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:23:04.988Z,1467087784.988 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:23:04.990Z,1467087784.990 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:25:17.054Z,1467087917.054 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T04:26:06.003Z,1467087966.003 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:26:06.005Z,1467087966.005 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:27:17.279Z,1467088037.279 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T04:27:19.288Z,1467088039.288 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T04:28:03.053Z,1467088083.053 [NAL9602](FAULT): GPS failed to acquire within timeout. 2016-06-28T04:29:06.831Z,1467088146.831 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:29:06.834Z,1467088146.834 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan 2016-06-28T04:29:19.684Z,1467088159.684 [Rowe_600LCM](FAULT): Did not receive valid device response within the specified allowable sample time. 2016-06-28T04:29:21.697Z,1467088161.697 [Rowe_600LCM](IMPORTANT): LCM not connected 2016-06-28T04:30:09.303Z,1467088209.303 [Default:CheckIn:E](IMPORTANT): Default mission has been running for 1473.335026 min