makai Path

trajectory

20251009T133000 [CommandExec]:got command restart logs

20251009T133009 [CommandExec]:got command configSet CBIT.runNavErrorCritical 1 bool persist

20251009T133009 [CommandExec]:got command load ./Missions/Science/sci2_vtyoyo.tl

20251009T133022 [CommandExec]:Loaded ./Missions/Science/sci2_vtyoyo.tl id=sci2_vtyoyo

20251009T133022 [MissionManager]:Started mission Default

20251009T133044 [CommandExec]:got command set sci2_vtyoyo.MissionTimeout 14 hour

20251009T133044 [CommandExec]:got command set sci2_vtyoyo.NeedCommsTime 90 minute

20251009T133044 [CommandExec]:got command set sci2_vtyoyo.Lat3 36.691 degree

20251009T133044 [CommandExec]:got command set sci2_vtyoyo.Lon3 -122.376 degree

20251009T133044 [CommandExec]:got command set sci2_vtyoyo.Speed .8 meter_per_second

20251009T133118 [CommandExec]:got command set sci2_vtyoyo.YoYoMinDepth 3 meter

20251009T133118 [CommandExec]:got command set sci2_vtyoyo.YoYoMaxDepth 150 meter

20251009T133118 [CommandExec]:got command set sci2_vtyoyo.MaxDepth 160 meter

20251009T133118 [CommandExec]:got command set sci2_vtyoyo.SinkOffSurface 1 bool

20251009T133118 [CommandExec]:got command set sci2_vtyoyo.SinkDepthTimeout 3 minute

20251009T133118 [CommandExec]:got command set sci2_vtyoyo:NeedComms.CommsTimeout 20 minute

20251009T133127 [CommandExec]:got command set sci2_vtyoyo:BackseatDriver.EnableBackseat 1 bool

20251009T133127 [CommandExec]:got command run

20251009T133127 [CommandExec]:Running

20251009T133127 [MissionManager]:Started mission sci2_vtyoyo

20251009T133129 [sci2_vtyoyo:StandardEnvelopes:A.AltitudeEnvelope]:Altitude Measurement is not Active.

20251009T133131 [CTD_Seabird]:Failed to parse device response: #

20251009T133202 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20251009T133206 [BackseatComponent]:piscivore: running backseat_app backseat application.

20251009T133221 [NAL9602]:Failed to initiate SBD session. Error code: 2

20251009T133526 [NAL9602]:Failed to initiate SBD session. Error code: 2

20251009T133744 [NAL9602]:Failed to initiate SBD session. Error code: 2

20251009T133814 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20251009T134011 out while trying to reach target sink depth at current depth of 0.022205 m

20251009T134211 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20251009T134826 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20251009T135245 [BPC1]:Failed to receive data from 8 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 1, 2, 3, 4, 5, 6, 7, 8.

20251009T135552 [CTD_Seabird]:Failed to parse device response: 59,4106.91#

20251009T135801 [Sonardyne_Nano]:Failed to parse response: >VS:2213,HPR45,EXT,TILT##

20251009T141502 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20251009T142040 [CTD_Seabird]:Failed to parse device response: 25.50.50#

20251009T143347 [BPC1]:Failed to receive data from 8 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 1, 2, 3, 4, 5, 6, 7, 8.

20251009T145650 [GFScanner]:Beginning ground fault scan

20251009T150542 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20251009T150835 [CTD_Seabird]:Salinity reading out of range: 13.504566 psu

20251009T151333 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20251009T151442 [CTD_Seabird]:Salinity reading out of range: 25.294081 psu

20251009T151448 [BPC1]:Failed to receive data from 8 sticks prior to timeout. Will not retry this scan cycle. Missing stick IDs are: 1, 2, 3, 4, 5, 6, 7, 8.

20251009T151710 out while trying to reach target sink depth at current depth of 1.295354 m

20251009T152812 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20251009T154417 [ThrusterHE]:Could not get status:serial timeout

20251009T154643 [BPC1]:BPC1A failed to parse battery data due to unrecognized msg size.

20251009T164250 [CTD_Seabird]:Failed to parse device response: #

20251009T164542 [CTD_Seabird]:Salinity reading out of range: 22.516804 psu

20251009T164612 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20251009T165043 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20251009T165159 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20251009T165430 out while trying to reach target sink depth at current depth of 6.545385 m

20251009T171403 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20251009T172051 [CTD_Seabird]:Failed to parse device response: 79.03,12417.13#

20251009T175200 [CTD_Seabird]:Failed to parse device response: .53#

20251009T184704 [CTD_Seabird]:Failed to parse device response: 47.76.25#

20251009T193342 [CTD_Seabird]:Failed to parse device response: 63,4198.91#

20251009T194200 [ThrusterHE]:Status lock Detected.

20251009T194201 [ThrusterHE]:Status lock Detected.

20251009T194202 [ThrusterHE]:Status lock Detected.

20251009T203335 [CTD_Seabird]:Failed to parse device response: 2,3.75573,2552.22#

20251009T203905 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20251009T205650 [GFScanner]:Beginning ground fault scan

20251009T210729 [CTD_Seabird]:Failed to parse device response: 0.15,23#

20251009T224521 [RudderServo]:getPosition uart error serial timeout

20251009T224521 [RudderServo]:Rudder uart error - getPosition..serial timeout

20251009T224521 [RudderServo]:Communications Fault

20251009T224521 [CBIT]:Communications Fault in component: RudderServo

20251009T225924 [CTD_Seabird]:Failed to parse device response: 9,3.77669,2639.93#

20251009T230913 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20251009T231020 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20251009T232424 [CommandExec]:got command set sci2_vtyoyo.YoYoMinDepth 4 meter

20251009T232445 [CommandExec]:got command schedule 20251010T021500 "restart logs"

20251009T232515 [CommandExec]:got command schedule 20251010T133000 "restart logs"

20251009T232749 [CommandExec]:got command schedule 20251010T021500 "load Transport/transit.tl;set transit.MissionTimeout 13 h;set transit.NeedCommsTime 90 min;set transit.Latitude 36.3601 degree;set transit.Longitude -122.3274 degree;set transit.Depth 100 m;set transit.Speed .8 m/s" 3nft1 1 2.000000

20251009T232749 [CommandExec]:Scheduling command #1 of 2 with id=3nft1

20251009T232749 [CommandExec]:Scheduled #25 (#1 of 2 with id='3nft1'): "load Transport/transit.tl;set transit.MissionTimeout 13 h;set transit.NeedCommsTime 90 min;set transit.Latitude 36.3601 degree;set transit.Longitude -122.3274 degree;set transit.Depth 100 m;set transit.Speed .8 m/s", AT TIME: 2025-10-10T02:15:00Z

20251009T232847 [CommandExec]:got command schedule 20251010T021500 "set transit.MaxDepth 130 m;set transit:NeedComms.CommsTimeout 20 min;run" 3nft1 2 2.000000

20251009T232847 [CommandExec]:Scheduling command #2 of 2 with id=3nft1

20251009T232847 [CommandExec]:Scheduled #26 (#2 of 2 with id='3nft1'): "set transit.MaxDepth 130 m;set transit:NeedComms.CommsTimeout 20 min;run", AT TIME: 2025-10-10T02:15:00Z

20251009T232946 [NAL9602]:Inadequate Iridium signal strength reported: 0

20251009T232949 [NAL9602]:Inadequate Iridium signal strength reported: 0

20251009T232951 [NAL9602]:Inadequate Iridium signal strength reported: 0

20251009T234942 [CTD_Seabird]:Failed to parse device response: 3,3.75109,2445.26#

20251009T235939 [RudderServo]:Reading outside of valid range:0.000000#

20251009T235939 [RudderServo]:Rudder reporting null position

20251009T235940 [RudderServo]:getPosition uart error serial timeout

20251009T235940 [RudderServo]:Rudder uart error - getPosition..serial timeout

20251009T235940 [RudderServo]:Communications Fault

20251009T235940 [CBIT]:Communications Fault in component: RudderServo

20251010T000431 [CTD_Seabird]:Failed to parse device response: 54.77,11.405.82#

20251010T001756 [CTD_Seabird]:Failed to parse device response: 15255.34#

20251010T011118 [CommandExec]:got command schedule 20251010T133000 "load Science/sci2_vtyoyo.tl;set sci2_vtyoyo.MissionTimeout 14 h;set sci2_vtyoyo.NeedCommsTime 90 min;set sci2_vtyoyo.Lat1 36.3601 degree;set sci2_vtyoyo.Lon1 -122.3274 degree;set sci2_vtyoyo.Lat2 36.58948 degree" 3ngfm 1 3.000000

20251010T011118 [CommandExec]:Scheduling command #1 of 3 with id=3ngfm

20251010T011118 [CommandExec]:Scheduled #27 (#1 of 3 with id='3ngfm'): "load Science/sci2_vtyoyo.tl;set sci2_vtyoyo.MissionTimeout 14 h;set sci2_vtyoyo.NeedCommsTime 90 min;set sci2_vtyoyo.Lat1 36.3601 degree;set sci2_vtyoyo.Lon1 -122.3274 degree;set sci2_vtyoyo.Lat2 36.58948 degree", AT TIME: 2025-10-10T13:30:00Z

20251010T012707 [Radio_Surface]:LCB fault: LCB Watchdog Reset.

20251010T012707 [Radio_Surface]:Hardware Fault

20251010T012708 [CBIT]:Hardware Fault in component: Radio_Surface

20251010T014017 [CTD_Seabird]:Failed to parse device response: 18.06,16.396.78#

20251010T014205 [BPC1]:BPC1B: No match for serial number FFFF in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20251010T015940 [CTD_Seabird]:Failed to parse device response: .88#

20251010T020259 [CTD_Seabird]:Failed to parse device response: .12#