makai Path

trajectory

20151110T230208 [CommandLine]:got command restart logs

20151110T230208 [MassServo]:Reading outside of valid range:327060.000000#

20151110T230209 [MassServo]:Reading outside of valid range:327060.000000#

20151110T230210 [MassServo]:Reading outside of valid range:327060.000000#

20151110T230318 [CBIT]:Environmental Failure. Press:14.451184 PSI. Humidity:38%. Temp:20 C. ABORTING MISSION

20151110T230642 [BPC1]:Failed to parse bank A battery data

20151110T230642 [CBIT]:Data Fault in component: BPC1

20151110T230731 [BPC1]:Failed to receive battery data

20151110T230731 [BPC1]:Communications Fault

20151110T230731 [CBIT]:Communications Fault in component: BPC1

20151110T230748 [BPC1]:Failed to receive battery data

20151110T230748 [BPC1]:Communications Fault

20151110T230748 [CBIT]:Communications Fault in component: BPC1

20151110T230855 [Default:CheckIn:E]:Default mission has been running for 51.155180 min

20151110T231008 [CBIT]:Environmental Failure. Press:14.982194 PSI. Humidity:37%. Temp:20 C. ABORTING MISSION

20151110T231042 [Rowe_600]:payload size is too large: 3223600 -- attempting to continue using maximum payload size: 1024

20151110T231043 [PNI_TCM]:CRC does not match. Expected:0x64422 got:0x18057

20151110T231043 [PNI_TCM]:CRC does not match. Expected:0x63973 got:0x22126

20151110T231043 [PNI_TCM]:CRC does not match. Expected:0x44323 got:0x46419

20151110T231053 [PNI_TCM]:Failed to acquire valid data within timeout.

20151110T231053 [CBIT]:Data Fault in component: PNI_TCM

20151110T231320 [BPC1]:Failed to parse bank B battery data

20151110T231320 [CBIT]:Data Fault in component: BPC1

20151110T231504 [Default:CheckIn:E]:Default mission has been running for 57.296615 min

20151110T231513 [RudderServo]:Overload Error

20151110T231513 [RudderServo]:Hardware Fault

20151110T231513 [CBIT]:Hardware Fault in component: RudderServo

20151110T231519 [RudderServo]:Overload Error

20151110T231519 [RudderServo]:Hardware Fault

20151110T231519 [CBIT]:Hardware Fault in component: RudderServo

20151110T231525 [RudderServo]:Overload Error

20151110T231525 [RudderServo]:Hardware Fault

20151110T231525 [CBIT]:Hardware Fault in component: RudderServo

20151110T231614 [CBIT]:Environmental Failure. Press:14.451184 PSI. Humidity:38%. Temp:20 C. ABORTING MISSION

20151110T231824 [BPC1]:Failed to receive battery data

20151110T231824 [BPC1]:Communications Fault

20151110T231824 [CBIT]:Communications Fault in component: BPC1

20151110T231900 [PNI_TCM]:Failed to acquire valid data within timeout.

20151110T231900 [CBIT]:Data Fault in component: PNI_TCM

20151110T232037 [BPC1]:Failed to parse bank A battery data

20151110T232037 [CBIT]:Data Fault in component: BPC1

20151110T232118 [Default:CheckIn:E]:Default mission has been running for 63.535636 min

20151110T232250 [NAL9602]:Failed to initiate SBD session. Error code: 2

20151110T232617 [Rowe_600]:Only MATLAB type 10 (float32) matrices are supported, got MATLAB type 0

20151110T232859 [BPC1]:Failed to parse message.

20151110T232859 [BPC1]:Failed to parse bank B battery data

20151110T232918 [NAL9602]:Failed to initiate SBD session. Error code: 2

20151110T232925 [BPC1]:Failed to parse message.

20151110T232925 [BPC1]:Failed to parse bank B battery data

20151110T232950 [NAL9602]:Failed to initiate SBD session. Error code: 2

20151110T233003 [Rowe_600]:Only MATLAB type 10 (float32) matrices are supported, got MATLAB type 48

20151110T233053 [RudderServo]:Rudder initialization uart error serial timeout

20151110T233053 [RudderServo]:Rudder failed to initialize

20151110T233053 [RudderServo]:Communications Fault

20151110T233053 [CBIT]:Communications Fault in component: RudderServo

20151110T233342 [BPC1]:Failed to parse bank A battery data

20151110T234110 [CommandLine]:got command maintain clear

20151110T234128 [CommandLine]:got command failComponent hardware MassServo

20151110T234128 [MassServo]:Hardware Fault

20151110T234128 [CommandLine]:MassServo failureMode is Hardware Fault

20151110T234128 [CBIT]:Hardware Fault in component: MassServo

20151110T234224 [CommandLine]:got command maintain clear

20151110T235725 [BPC1]:Failed to parse message.

20151111T001333 [Rowe_600]:unknown matrix type0

20151111T002708 [Rowe_600]:Different number of beams (26) than expected (4).

20151111T002708 [Rowe_600]:Different number of bins (17) than expected (1).

20151111T004809 [Rowe_600]:unknown matrix type0

20151111T004831 [Rowe_600]:unknown matrix type0

20151111T005110 [Rowe_600]:SIGSEGV: address not mapped to object

20151111T005111 [CBIT]:Software Fault in component: Rowe_600

20151111T010126 [PNI_TCM]:Failed to acquire valid data within timeout.

20151111T010126 [CBIT]:Data Fault in component: PNI_TCM

20151111T012807 [Rowe_600]:Only MATLAB type 10 (float32) matrices are supported, got MATLAB type 0

20151111T015244 [CBIT]:Humidity exceeds 50% of running average: Humidity:59 %. Average:39.049999

20151111T020157 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20151111T020716 [NAL9602]:GPS failed to acquire within timeout.

20151111T020716 [CBIT]:Data Fault in component: NAL9602

20151111T021235 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20151111T021742 [NAL9602]:GPS failed to acquire within timeout.

20151111T021742 [CBIT]:Data Fault in component: NAL9602

20151111T022301 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20151111T022759 [NAL9602]:GPS failed to acquire within timeout.

20151111T022759 [CBIT]:Data Fault in component: NAL9602

20151111T023448 [DeadReckonUsingMultipleVelocitySources]:Will not write estimated position: allowance for input measurements to start up has expired, velocity or orientation is invalid, and horizontal path length since last fix is nonzero.

20151111T023448 [DeadReckonUsingMultipleVelocitySources]:Software Fault

20151111T023448 [CBIT]:Software Fault in component: DeadReckonUsingMultipleVelocitySources

20151111T024341 [Rowe_600]:Different number of beams (808464432) than expected (4).

20151111T024341 [Rowe_600]:Different number of bins (808464432) than expected (1).

20151111T025944 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20151111T035158 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20151111T041514 [CBIT]:Beginning GF scan

20151111T042140 [RudderServo]:Rudder initialization uart error serial timeout

20151111T042140 [RudderServo]:Rudder failed to initialize

20151111T042140 [RudderServo]:Communications Fault

20151111T042141 [CBIT]:Communications Fault in component: RudderServo

20151111T043126 [DeadReckonUsingMultipleVelocitySources]:Will not write estimated position: allowance for input measurements to start up has expired, velocity or orientation is invalid, and horizontal path length since last fix is nonzero.

20151111T043126 [DeadReckonUsingMultipleVelocitySources]:Software Fault

20151111T043126 [CBIT]:Software Fault in component: DeadReckonUsingMultipleVelocitySources

20151111T044402 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20151111T054013 [Rowe_600]:Different number of beams (71) than expected (4).

20151111T055430 [DeadReckonUsingMultipleVelocitySources]:Will not write estimated position: allowance for input measurements to start up has expired, velocity or orientation is invalid, and horizontal path length since last fix is nonzero.

20151111T055430 [DeadReckonUsingMultipleVelocitySources]:Software Fault

20151111T055430 [CBIT]:Software Fault in component: DeadReckonUsingMultipleVelocitySources

20151111T062420 [RudderServo]:Rudder initialization uart error serial timeout

20151111T062420 [RudderServo]:Rudder failed to initialize

20151111T062420 [RudderServo]:Communications Fault

20151111T062420 [CBIT]:Communications Fault in component: RudderServo

20151111T101541 [CBIT]:Beginning GF scan

20151111T134518 [Rowe_600]:first preamble found after 1944 bytes, which is more than sizeof( deviceResponse_ ) 1060

20151111T144229 [Rowe_600]:Different number of bins (11) than expected (1).

20151111T161607 [CBIT]:Beginning GF scan

20151111T175740 [CommandLine]:got command failComponent

20151111T175740 [CommandLine]:Failed components:

20151111T175740 [CommandLine]:RudderServo: Hardware Fault

20151111T175744 [CommandLine]:got command failComponent none RudderServo

20151111T175744 [CommandLine]:RudderServo failureMode is No Fault

20151111T175801 [CommandLine]:got command report mod ElevatorServo.platform_elevator_angle

20151111T175820 [CommandLine]:got command maintain control VerticalControl.elevatorAngleAction 10.000000 degree

20151111T175830 [CommandLine]:got command report clear

20151111T175838 [CommandLine]:got command get ElevatorServo.platform_elevator_angle degree

20151111T175838 [CommandLine]:ElevatorServo.platform_elevator_angle 10.026406 arcdeg

20151111T175855 [CommandLine]:got command maintain control VerticalControl.elevatorAngleAction -10.000000 degree

20151111T175906 [CommandLine]:got command get ElevatorServo.platform_elevator_angle degree

20151111T175906 [CommandLine]:ElevatorServo.platform_elevator_angle -10.032274 arcdeg

20151111T180203 [CommandLine]:got command maintain clear

20151111T185748 [Rowe_600]:Ensemble number mismatch: 136883 in header, 5811 in ensemble data matrix.

20151111T185852 [Rowe_600]:Ensemble number mismatch: 137012 in header, 5940 in ensemble data matrix.

20151111T191328 [NAL9602]:Inadequate Iridium signal strength reported: 0

20151111T191331 [NAL9602]:Inadequate Iridium signal strength reported: 0

20151111T191340 [NAL9602]:Inadequate Iridium signal strength reported: 0

20151111T224444 [Rowe_600]:Ensemble number mismatch: 167413 in header, 11 in ensemble data matrix.

20151111T231441 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped weight due to communications timeout.

20151111T231941 [CommandLine]:Deactivating dropweight wire

20151112T030714 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped weight due to communications timeout.

20151112T031214 [CommandLine]:Deactivating dropweight wire

20151112T051716 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped weight due to communications timeout.

20151112T052104 [DropWeight]:DROP WEIGHT MISSING.#

20151112T052104 [DropWeight]:Hardware Fault

20151112T052104 [CBIT]:Hardware Fault in component: DropWeight

20151112T052215 [CommandLine]:Deactivating dropweight wire

20151112T070527 [Rowe_600]:payload size is too large: 3223600 -- attempting to continue using maximum payload size: 1024

20151112T071010 [Rowe_600]:Ensemble number mismatch: 241245 in header, -1038897571 in ensemble data matrix.

20151112T073510 [Rowe_600]:Different number of beams (-1038878399) than expected (4).

20151112T115157 [DropWeight]:DROP WEIGHT MISSING.#

20151112T115157 [DropWeight]:Hardware Fault

20151112T115157 [CBIT]:Hardware Fault in component: DropWeight

20151112T131808 [Rowe_600]:Different number of beams (-1038759065) than expected (4).

20151112T135940 [Rowe_600]:first preamble found after 1720 bytes, which is more than sizeof( deviceResponse_ ) 1060

20151112T140619 [NAL9602]:Queried for signal strength and failed to receive proper response. no error

20151112T140619 [NAL9602]:received: ##COMMAND MODE: Started####COMMAND MODE: Ready for Input##

20151112T151054 [NAL9602]:received: ##+CSQ:0####OK: Started####COMMAND MODE: Ready for Input##

20151112T160817 [NAL9602]:received: ##+CSQ:0####OK: Started####COMMAND MODE: Ready for Input##

20151112T170948 [NAL9602]:received: ##+CSQ:0####OK: Started####COMMAND MODE: Ready for Input##

20151112T190600 [NAL9602]:Queried for signal strength and failed to receive proper response. no error

20151112T190600 [NAL9602]:received: ##COMMAND MODE: Started####COMMAND MODE: Ready for Input##

20151113T024802 [PNI_TCM]:LCB fault: Hardware Overcurrent Shutdown.

20151113T024802 [PNI_TCM]:Hardware Fault

20151113T031404 [Rowe_600]:payload size is too large: 3223600 -- attempting to continue using maximum payload size: 1024

20151113T053837 [Rowe_600]:first preamble found after 1688 bytes, which is more than sizeof( deviceResponse_ ) 1060

20151113T154313 [RudderServo]:LCB fault: Software Overcurrent.

20151113T161444 [Default:C]:Restarting logs and Default mission.