makai Path

trajectory

20150513T223125 [BPC1]:Failed to receive battery data

20150513T223125 [BPC1]:Communications Fault

20150513T223126 [CBIT]:Communications Fault in component: BPC1

20150513T223151 [BPC1]:Failed to receive battery data

20150513T223151 [BPC1]:Communications Fault

20150513T223152 [CBIT]:Communications Fault in component: BPC1

20150513T223214 [Rowe_600]:first preamble found after 7664 bytes, which is more than sizeof( deviceResponse_ ) 4116

20150513T223214 [Rowe_600]:Ensemble number mismatch: 598 in header, 599 in ensemble data matrix.

20150513T223215 [Rowe_600]:first preamble found after 4208 bytes, which is more than sizeof( deviceResponse_ ) 4116

20150513T223216 [Rowe_600]:Ensemble number mismatch: 603 in header, 604 in ensemble data matrix.

20150513T223217 [Rowe_600]:first preamble found after 5098 bytes, which is more than sizeof( deviceResponse_ ) 4116

20150513T223232 [BPC1]:Failed to receive battery data

20150513T223232 [BPC1]:Communications Fault

20150513T223232 [CBIT]:Communications Fault in component: BPC1

20150513T223233 [Rowe_600]:Ensemble number mismatch: 695 in header, 696 in ensemble data matrix.

20150513T223628 [BPC1]:Failed to parse bank A battery data

20150513T223628 [CBIT]:Data Fault in component: BPC1

20150513T224035 [DropWeight]:DROP WEIGHT MISSING.#

20150513T224035 [DropWeight]:Hardware Fault

20150513T224035 [CBIT]:Hardware Fault in component: DropWeight

20150513T224232 [Rowe_600]:unknown matrix type0

20150513T224521 [CommandLine]:got command configSet Radio_Surface.loadAtStartup 0.000000 bool persist

20150513T224521 [CommandLine]:configSet Radio_Surface.loadAtStartup requires a restart to take effect.

20150513T225318 [Rowe_600]:Different number of beams (808464432) than expected (4).

20150513T225318 [Rowe_600]:Different number of bins (812396830) than expected (30).

20150513T225318 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20150513T225417 [BPC1]:Failed to parse bank A battery data

20150513T225418 [CBIT]:Data Fault in component: BPC1

20150513T225418 [PNI_TCM]:CRC does not match. Expected:0x16210 got:0x99

20150513T225418 [PNI_TCM]:CRC does not match. Expected:0x30308 got:0x22

20150513T225418 [PNI_TCM]:CRC does not match. Expected:0x20013 got:0x18

20150513T225427 [PNI_TCM]:Failed to acquire valid data within timeout.

20150513T225427 [DeadReckonUsingMultipleVelocitySources]:The allowance for input measurements to start up has expired, but I still cannot determine the rotation from vehicle frame to navigation frame.

20150513T225427 [DeadReckonUsingMultipleVelocitySources]:Software Fault

20150513T225427 [DeadReckonUsingSpeedCalculator]:The allowance for input measurements to start up has expired, but I still cannot determine the rotation from vehicle frame to navigation frame.

20150513T225427 [DeadReckonUsingSpeedCalculator]:Software Fault

20150513T225427 [CBIT]:Software Fault in component: DeadReckonUsingMultipleVelocitySources

20150513T225427 [CBIT]:Software Fault in component: DeadReckonUsingSpeedCalculator

20150513T225427 [CBIT]:Data Fault in component: PNI_TCM

20150513T225428 [HFRCMSurfaceCurrentAtVehicleLocation]:could not read latitude or longitude from slate

20150513T225429 [HFRCMSurfaceCurrentAtVehicleLocation]:could not read latitude or longitude from slate

20150513T225430 [HFRCMSurfaceCurrentAtVehicleLocation]:could not read latitude or longitude from slate

20150513T225535 [DropWeight]:DROP WEIGHT MISSING.#

20150513T225535 [DropWeight]:Hardware Fault

20150513T225535 [CBIT]:Hardware Fault in component: DropWeight

20150513T225607 [PNI_TCM]:Failed to acquire valid data within timeout.

20150513T225607 [CBIT]:Data Fault in component: PNI_TCM

20150513T225728 [DeadReckonUsingMultipleVelocitySources]:Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan

20150513T225728 [DeadReckonUsingMultipleVelocitySources]:Software Fault

20150513T225728 [DeadReckonUsingSpeedCalculator]:Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan

20150513T225728 [DeadReckonUsingSpeedCalculator]:Software Fault

20150513T225728 [CBIT]:Software Fault in component: DeadReckonUsingMultipleVelocitySources

20150513T225728 [CBIT]:Software Fault in component: DeadReckonUsingSpeedCalculator

20150513T230027 [Rowe_600]:unknown matrix type0

20150513T230029 [DeadReckonUsingMultipleVelocitySources]:Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan

20150513T230029 [DeadReckonUsingMultipleVelocitySources]:Software Fault

20150513T230030 [DeadReckonUsingSpeedCalculator]:Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan

20150513T230030 [DeadReckonUsingSpeedCalculator]:Software Fault

20150513T230030 [CBIT]:Software Fault in component: DeadReckonUsingMultipleVelocitySources

20150513T230030 [CBIT]:Software Fault in component: DeadReckonUsingSpeedCalculator

20150513T230240 [Rowe_600]:unknown matrix type0

20150513T230258 [NAL9602]:Failed to initiate SBD session. Error code: 2

20150513T230330 [DeadReckonUsingMultipleVelocitySources]:Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan

20150513T230330 [DeadReckonUsingSpeedCalculator]:Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan

20150513T230349 [NAL9602]:Failed to initiate SBD session. Error code: 2

20150513T230357 [NAL9602]:Failed to initiate SBD session. Error code: 2

20150513T230607 [BPC1]:Failed to parse bank A battery data

20150513T230607 [CBIT]:Data Fault in component: BPC1

20150513T231035 [DropWeight]:DROP WEIGHT MISSING.#

20150513T231035 [DropWeight]:Hardware Fault

20150513T231036 [CBIT]:Hardware Fault in component: DropWeight

20150513T231816 [BPC1]:Failed to parse bank B battery data

20150513T231912 [CommandLine]:got command stop

20150513T231912 [CommandLine]:Scheduling is paused

20150513T231944 [BPC1]:Failed to parse bank B battery data

20150513T232319 [Rowe_600]:Only MATLAB type 10 (float32) matrices are supported, got MATLAB type 0

20150513T232425 [BPC1]:Failed to parse message.

20150513T232425 [BPC1]:Failed to parse bank B battery data

20150513T232536 [CommandLine]:Scheduling is paused

20150513T232730 [Depth_Keller]:Data Fault

20150513T232731 [CTD_NeilBrown]:Could not get real or simulated CTD data. startTime.elapsed() = 0.408936

20150513T232731 [CBIT]:Data Fault in component: Depth_Keller

20150513T232731 [CTD_NeilBrown]:Could not get real or simulated CTD data. startTime.elapsed() = 0.816371

20150513T232916 [Rowe_600]:Only MATLAB type 10 (float32) matrices are supported, got MATLAB type 47

20150513T233204 [PNI_TCM]:Failed to acquire valid data within timeout.

20150513T233205 [CBIT]:Data Fault in component: PNI_TCM

20150513T233808 [Rowe_600]:Only MATLAB type 10 (float32) matrices are supported, got MATLAB type 47

20150513T235848 [PNI_TCM]:LCB fault: Software Overcurrent.

20150513T235848 [PNI_TCM]:Hardware Fault

20150514T003218 [BPC1]:Failed to parse message.

20150514T003515 [CommandLine]:got command report mod NAL9602.sigQuality

20150514T003644 [NAL9602]:Inadequate Iridium signal strength reported: 0

20150514T003646 [NAL9602]:Inadequate Iridium signal strength reported: 0

20150514T003651 [NAL9602]:Inadequate Iridium signal strength reported: 0

20150514T005139 [BPC1]:Failed to parse message.

20150514T005304 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped weight due to communications timeout.

20150514T005306 [NAL9602]:GPS failed to acquire within timeout.

20150514T005307 [CBIT]:Data Fault in component: NAL9602

20150514T005542 [Default:CheckIn:ReportMinutesSinceMissionStarted:B]:Default mission has been running for 146.988802 min

20150514T005804 [CommandLine]:Deactivating dropweight wire

20150514T010455 [DeadReckonUsingMultipleVelocitySources]:The allowance for input measurements to start up has expired, but I still cannot determine the rotation from vehicle frame to navigation frame.

20150514T010455 [DeadReckonUsingSpeedCalculator]:The allowance for input measurements to start up has expired, but I still cannot determine the rotation from vehicle frame to navigation frame.

20150514T012640 [Rowe_600]:Different number of beams (1) than expected (4).

20150514T013719 [PAR_Licor]:Data Fault

20150514T013719 [CBIT]:Data Fault in component: PAR_Licor

20150514T015504 [PAR_Licor]:Data Fault

20150514T015504 [CBIT]:Data Fault in component: PAR_Licor

20150514T020420 [PNI_TCM]:LCB fault: Software Overcurrent.

20150514T020420 [PNI_TCM]:Hardware Fault

20150514T022402 [PAR_Licor]:Data Fault

20150514T022403 [CBIT]:Data Fault in component: PAR_Licor

20150514T022529 [PNI_TCM]:LCB fault: Software Overcurrent.

20150514T022529 [PNI_TCM]:Hardware Fault

20150514T025542 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped weight due to communications timeout.

20150514T025550 [Default:CheckIn:ReportMinutesSinceMissionStarted:B]:Default mission has been running for 267.125146 min

20150514T030042 [CommandLine]:Deactivating dropweight wire

20150514T030423 [Rowe_600]:Different number of beams (1) than expected (4).

20150514T030853 [DeadReckonUsingMultipleVelocitySources]:The allowance for input measurements to start up has expired, but I still cannot determine the rotation from vehicle frame to navigation frame.

20150514T030853 [DeadReckonUsingSpeedCalculator]:The allowance for input measurements to start up has expired, but I still cannot determine the rotation from vehicle frame to navigation frame.

20150514T034235 [Rowe_600]:Different number of bins (1) than expected (30).

20150514T040456 [Rowe_600]:Different number of bins (1) than expected (30).

20150514T042614 [CBIT]:Beginning GF scan

20150514T045552 [Default:CheckIn:Read_Iridium:A_Timeout:B]:Dropped weight due to communications timeout.

20150514T045608 [Default:CheckIn:ReportMinutesSinceMissionStarted:B]:Default mission has been running for 387.432064 min

20150514T050051 [CommandLine]:Deactivating dropweight wire

20150514T051016 [CommandLine]:got command ! echo 1 > /dev/loadB6

20150514T052325 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20150514T052839 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20150514T052840 [CBIT]:Data Fault in component: NAL9602

20150514T052859 [NAL9602]:GPS failed to acquire within timeout.

20150514T052859 [CBIT]:Data Fault in component: NAL9602

20150514T052951 [Rowe_600]:Ensemble number mismatch: 48158 in header, -2139062144 in ensemble data matrix.

20150514T052951 [Rowe_600]:Different number of beams (-2139062144) than expected (4).

20150514T053308 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20150514T053752 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20150514T054649 [NAL9602]:GPS failed to acquire within timeout.

20150514T055838 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20150514T061244 [Rowe_600]:Ensemble number mismatch: 53036 in header, -962051407 in ensemble data matrix.

20150514T061244 [Rowe_600]:Different number of beams (-962051407) than expected (4).

20150514T061244 [Rowe_600]:Different number of bins (-962051407) than expected (30).

20150514T064039 [CommandLine]:got command configSet list

20150514T064039 [CommandLine]:Listing configuration overrides from Data/persisted.cfg

20150514T064039 [CommandLine]:CBIT.runFaultClassifier=1 bool;#

20150514T064039 [CommandLine]:Express all NAL9602.sigQuality;#

20150514T064039 [CommandLine]:Radio_Surface.loadAtStartup=0 bool;#

20150514T064228 [Rowe_600]:Ensemble number mismatch: 56348 in header, -2139062144 in ensemble data matrix.

20150514T064228 [Rowe_600]:Different number of beams (-2139062144) than expected (4).

20150514T080502 [Rowe_600]:payload size is too large: 808469760 -- attempting to continue using maximum payload size: 4080

20150514T102643 [CBIT]:Beginning GF scan

20150514T131909 [Rowe_600]:payload size is too large: 1051282086 -- attempting to continue using maximum payload size: 4080

20150514T162755 [CBIT]:Beginning GF scan

20150514T171008 [CommandLine]:got command ! echo 0 > /dev/loadB6