2015-03-31T22:15:06.578Z,1427840106.578 [Supervisor](DEBUG): Initializing supervisor.
2015-03-31T22:15:06.580Z,1427840106.580 [SyncHandler](DEBUG): Created PCaller Thread at 4034C4E0
2015-03-31T22:15:06.581Z,1427840106.581 [SyncHandler](INFO): Protected caller Thread ID is 768
2015-03-31T22:15:06.581Z,1427840106.581 [ComponentRegistry](DEBUG): Component "controlThread" handled in its own thread.
2015-03-31T22:15:06.582Z,1427840106.582 [controlThread ThreadHandler](DEBUG): Created PCaller Thread at 4037C4E0
2015-03-31T22:15:06.583Z,1427840106.583 [controlThread ThreadHandler](INFO): Protected caller Thread ID is 769
2015-03-31T22:15:06.586Z,1427840106.586 [ComponentRegistry](DEBUG): SyncComponent "CycleStarter" handled in the control thread.
2015-03-31T22:15:06.598Z,1427840106.598 [ComponentRegistry](DEBUG): Component "CommandLine" handled in its own thread.
2015-03-31T22:15:06.599Z,1427840106.599 [CommandLine ThreadHandler](DEBUG): Created PCaller Thread at 403AC4E0
2015-03-31T22:15:06.599Z,1427840106.599 [CommandLine ThreadHandler](INFO): Protected caller Thread ID is 770
2015-03-31T22:15:06.600Z,1427840106.600 [ComponentRegistry](DEBUG): Component "logger" handled in its own thread.
2015-03-31T22:15:06.601Z,1427840106.601 [logger ThreadHandler](DEBUG): Created PCaller Thread at 403DC4E0
2015-03-31T22:15:06.601Z,1427840106.601 [logger ThreadHandler](INFO): Protected caller Thread ID is 771
2015-03-31T22:15:06.603Z,1427840106.603 [ComponentRegistry](DEBUG): SyncComponent "LogSplitter" handled in the control thread.
2015-03-31T22:15:06.604Z,1427840106.604 [Supervisor](INFO): Looking for Config files in directory: Config/
2015-03-31T22:15:06.607Z,1427840106.607 [Supervisor](INFO): Opening Config file at: Config/Control.cfg
2015-03-31T22:15:06.947Z,1427840106.947 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Control
2015-03-31T22:15:06.948Z,1427840106.948 [Supervisor](INFO): Opening Config file at: Config/BIT.cfg
2015-03-31T22:15:07.115Z,1427840107.115 [ComponentRegistry](DEBUG): Loaded Config Component "Config/BIT
2015-03-31T22:15:07.116Z,1427840107.116 [Supervisor](INFO): Opening Config file at: Config/Derivation.cfg
2015-03-31T22:15:07.227Z,1427840107.227 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Derivation
2015-03-31T22:15:07.227Z,1427840107.227 [Supervisor](INFO): Opening Config file at: Config/Estimation.cfg
2015-03-31T22:15:07.352Z,1427840107.352 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Estimation
2015-03-31T22:15:07.353Z,1427840107.353 [Supervisor](INFO): Opening Config file at: Config/Guidance.cfg
2015-03-31T22:15:07.441Z,1427840107.441 [Supervisor](INFO): Opening Config file at: Config/Navigation.cfg
2015-03-31T22:15:07.605Z,1427840107.605 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Navigation
2015-03-31T22:15:07.605Z,1427840107.605 [Supervisor](INFO): Opening Config file at: Config/Sample.cfg
2015-03-31T22:15:07.693Z,1427840107.693 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sample
2015-03-31T22:15:07.694Z,1427840107.694 [Supervisor](INFO): Opening Config file at: Config/Science.cfg
2015-03-31T22:15:07.909Z,1427840107.909 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Science
2015-03-31T22:15:07.912Z,1427840107.912 [Supervisor](INFO): Opening Config file at: Config/Sensor.cfg
2015-03-31T22:15:08.277Z,1427840108.277 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Sensor
2015-03-31T22:15:08.278Z,1427840108.278 [Supervisor](INFO): Opening Config file at: Config/Servo.cfg
2015-03-31T22:15:08.595Z,1427840108.595 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Servo
2015-03-31T22:15:08.596Z,1427840108.596 [Supervisor](INFO): Opening Config file at: Config/Simulator.cfg
2015-03-31T22:15:09.106Z,1427840109.106 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Simulator
2015-03-31T22:15:09.107Z,1427840109.107 [Supervisor](INFO): Opening Config file at: Config/logger.cfg
2015-03-31T22:15:09.349Z,1427840109.349 [ComponentRegistry](DEBUG): Loaded Config Component "Config/logger
2015-03-31T22:15:09.350Z,1427840109.350 [Supervisor](INFO): Opening Config file at: Config/secure.cfg
2015-03-31T22:15:09.456Z,1427840109.456 [ComponentRegistry](DEBUG): Loaded Config Component "Config/secure
2015-03-31T22:15:09.457Z,1427840109.457 [Supervisor](INFO): Opening Config file at: Config/vehicle.cfg
2015-03-31T22:15:09.880Z,1427840109.880 [ComponentRegistry](DEBUG): Loaded Config Component "Config/vehicle
2015-03-31T22:15:09.880Z,1427840109.880 [Supervisor](INFO): Opening Config file at: Config/workSite.cfg
2015-03-31T22:15:09.994Z,1427840109.994 [ComponentRegistry](DEBUG): Loaded Config Component "Config/workSite
2015-03-31T22:15:09.996Z,1427840109.996 [Supervisor](INFO): Looking for Config files in directory: Config/lrauv-makai/
2015-03-31T22:15:09.999Z,1427840109.999 [Supervisor](INFO): Opening Config file at: Config/lrauv-makai/Battery.cfg
2015-03-31T22:15:10.249Z,1427840110.249 [ComponentRegistry](DEBUG): Loaded Config Component "Config/Battery
2015-03-31T22:15:10.250Z,1427840110.250 [Supervisor](INFO): Opening Config file at: Config/lrauv-makai/BIT.cfg
2015-03-31T22:15:23.053Z,1427840123.053 [Supervisor](INFO): Opening Config file at: Config/lrauv-makai/Estimation.cfg
2015-03-31T22:15:24.013Z,1427840124.013 [Supervisor](INFO): Opening Config file at: Config/lrauv-makai/Control.cfg
2015-03-31T22:15:24.112Z,1427840124.112 [Supervisor](INFO): Opening Config file at: Config/lrauv-makai/Navigation.cfg
2015-03-31T22:15:24.222Z,1427840124.222 [Supervisor](INFO): Opening Config file at: Config/lrauv-makai/Science.cfg
2015-03-31T22:15:24.368Z,1427840124.368 [Supervisor](INFO): Opening Config file at: Config/lrauv-makai/Sensor.cfg
2015-03-31T22:15:24.545Z,1427840124.545 [Supervisor](INFO): Opening Config file at: Config/lrauv-makai/Servo.cfg
2015-03-31T22:15:24.648Z,1427840124.648 [Supervisor](INFO): Opening Config file at: Config/lrauv-makai/Simulator.cfg
2015-03-31T22:15:24.741Z,1427840124.741 [Supervisor](INFO): Opening Config file at: Config/lrauv-makai/logger.cfg
2015-03-31T22:15:24.845Z,1427840124.845 [Supervisor](INFO): Opening Config file at: Config/lrauv-makai/secure.cfg
2015-03-31T22:15:24.943Z,1427840124.943 [Supervisor](INFO): Opening Config file at: Config/lrauv-makai/vehicle.cfg
2015-03-31T22:15:25.132Z,1427840125.132 [Supervisor](FAULT): Ignoring configuration overrides from Data/persisted.cfg
2015-03-31T22:15:25.139Z,1427840125.139 [Module Loader](DEBUG): Loading Module at Modules/Control.so
2015-03-31T22:15:25.216Z,1427840125.216 [VerticalControl](DEBUG): Construct VerticalControl.
2015-03-31T22:15:25.338Z,1427840125.338 [VerticalControl] Loaded
2015-03-31T22:15:25.339Z,1427840125.339 [ComponentRegistry](DEBUG): SyncComponent "VerticalControl" handled in the control thread.
2015-03-31T22:15:25.339Z,1427840125.339 [HorizontalControl](DEBUG): Construct HorizontalControl.
2015-03-31T22:15:25.414Z,1427840125.414 [HorizontalControl] Loaded
2015-03-31T22:15:25.414Z,1427840125.414 [ComponentRegistry](DEBUG): SyncComponent "HorizontalControl" handled in the control thread.
2015-03-31T22:15:25.415Z,1427840125.415 [SpeedControl](DEBUG): Construct SpeedControl.
2015-03-31T22:15:25.421Z,1427840125.421 [SpeedControl] Loaded
2015-03-31T22:15:25.421Z,1427840125.421 [ComponentRegistry](DEBUG): SyncComponent "SpeedControl" handled in the control thread.
2015-03-31T22:15:25.422Z,1427840125.422 [LoopControl](DEBUG): Construct LoopControl.
2015-03-31T22:15:25.423Z,1427840125.423 [LoopControl] Loaded
2015-03-31T22:15:25.423Z,1427840125.423 [ComponentRegistry](DEBUG): SyncComponent "LoopControl" handled in the control thread.
2015-03-31T22:15:25.424Z,1427840125.424 [Module Loader](DEBUG): Loaded Module: Control (Contains the Control components, such as Depth, Heading, and Speed Control)
2015-03-31T22:15:25.424Z,1427840125.424 [Module Loader](DEBUG): Loading Module at Modules/BIT.so
2015-03-31T22:15:25.581Z,1427840125.581 [SBIT](DEBUG): Construct Startup Built In Test.
2015-03-31T22:15:25.592Z,1427840125.592 [SBIT] Loaded
2015-03-31T22:15:25.593Z,1427840125.593 [ComponentRegistry](DEBUG): SyncComponent "SBIT" handled in the control thread.
2015-03-31T22:15:25.593Z,1427840125.593 [IBIT](DEBUG): Construct Initiated Built In Test.
2015-03-31T22:15:25.623Z,1427840125.623 [IBIT] Loaded
2015-03-31T22:15:25.624Z,1427840125.624 [ComponentRegistry](DEBUG): SyncComponent "IBIT" handled in the control thread.
2015-03-31T22:15:25.626Z,1427840125.626 [CBIT](DEBUG): Construct Continuous Built In Test.
2015-03-31T22:15:25.763Z,1427840125.763 [CBIT] Loaded
2015-03-31T22:15:25.763Z,1427840125.763 [ComponentRegistry](DEBUG): SyncComponent "CBIT" handled in the control thread.
2015-03-31T22:15:25.764Z,1427840125.764 [Module Loader](DEBUG): Loaded Module: BIT (Contains the BuiltInTest components, such as C Built In Test)
2015-03-31T22:15:25.764Z,1427840125.764 [Module Loader](DEBUG): Loading Module at Modules/Derivation.so
2015-03-31T22:15:25.795Z,1427840125.795 [DepthRateCalculator] Loaded
2015-03-31T22:15:25.796Z,1427840125.796 [ComponentRegistry](DEBUG): SyncComponent "DepthRateCalculator" handled in the control thread.
2015-03-31T22:15:25.801Z,1427840125.801 [PitchRateCalculator] Loaded
2015-03-31T22:15:25.802Z,1427840125.802 [ComponentRegistry](DEBUG): SyncComponent "PitchRateCalculator" handled in the control thread.
2015-03-31T22:15:25.813Z,1427840125.813 [SpeedCalculator] Loaded
2015-03-31T22:15:25.814Z,1427840125.814 [ComponentRegistry](DEBUG): SyncComponent "SpeedCalculator" handled in the control thread.
2015-03-31T22:15:25.830Z,1427840125.830 [TempGradientCalculator] Loaded
2015-03-31T22:15:25.831Z,1427840125.831 [ComponentRegistry](DEBUG): SyncComponent "TempGradientCalculator" handled in the control thread.
2015-03-31T22:15:25.836Z,1427840125.836 [YawRateCalculator] Loaded
2015-03-31T22:15:25.837Z,1427840125.837 [ComponentRegistry](DEBUG): SyncComponent "YawRateCalculator" handled in the control thread.
2015-03-31T22:15:25.837Z,1427840125.837 [Module Loader](DEBUG): Loaded Module: Derivation (Contains the base derivation components)
2015-03-31T22:15:25.838Z,1427840125.838 [Module Loader](DEBUG): Loading Module at Modules/Estimation.so
2015-03-31T22:15:27.029Z,1427840127.029 [HFRCMReconstructedInterpolator] Loaded
2015-03-31T22:15:27.029Z,1427840127.029 [ComponentRegistry](DEBUG): SyncComponent "HFRCMReconstructedInterpolator" handled in the control thread.
2015-03-31T22:15:27.030Z,1427840127.030 [Module Loader](DEBUG): Loaded Module: Estimation (Contains the base estimation components)
2015-03-31T22:15:27.030Z,1427840127.030 [Module Loader](DEBUG): Loading Module at Modules/Guidance.so
2015-03-31T22:15:27.317Z,1427840127.317 [Module Loader](DEBUG): Loaded Module: Guidance (Contains behaviors and commands)
2015-03-31T22:15:27.318Z,1427840127.318 [Module Loader](DEBUG): Loading Module at Modules/Navigation.so
2015-03-31T22:15:27.428Z,1427840127.428 [DeadReckonUsingMultipleVelocitySources] Loaded
2015-03-31T22:15:27.428Z,1427840127.428 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingMultipleVelocitySources" handled in the control thread.
2015-03-31T22:15:27.477Z,1427840127.477 [DeadReckonUsingSpeedCalculator] Loaded
2015-03-31T22:15:27.477Z,1427840127.477 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingSpeedCalculator" handled in the control thread.
2015-03-31T22:15:27.527Z,1427840127.527 [DeadReckonWithRespectToWater] Loaded
2015-03-31T22:15:27.527Z,1427840127.527 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToWater" handled in the control thread.
2015-03-31T22:15:27.574Z,1427840127.574 [DeadReckonWithRespectToSeafloor] Loaded
2015-03-31T22:15:27.575Z,1427840127.575 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonWithRespectToSeafloor" handled in the control thread.
2015-03-31T22:15:27.627Z,1427840127.627 [DeadReckonUsingDVLWaterTrack] Loaded
2015-03-31T22:15:27.627Z,1427840127.627 [ComponentRegistry](DEBUG): SyncComponent "DeadReckonUsingDVLWaterTrack" handled in the control thread.
2015-03-31T22:15:27.645Z,1427840127.645 [NavChart] Loaded
2015-03-31T22:15:27.645Z,1427840127.645 [ComponentRegistry](DEBUG): SyncComponent "NavChart" handled in the control thread.
2015-03-31T22:15:27.650Z,1427840127.650 [UniversalFixResidualReporter] Loaded
2015-03-31T22:15:27.650Z,1427840127.650 [ComponentRegistry](DEBUG): SyncComponent "UniversalFixResidualReporter" handled in the control thread.
2015-03-31T22:15:27.650Z,1427840127.650 [Module Loader](DEBUG): Loaded Module: Navigation (Contains the base navigation components)
2015-03-31T22:15:27.651Z,1427840127.651 [Module Loader](DEBUG): Loading Module at Modules/Sample.so
2015-03-31T22:15:27.660Z,1427840127.660 [Module Loader](DEBUG): Loaded Module: Sample (This is a Sample Module of Sample Components)
2015-03-31T22:15:27.661Z,1427840127.661 [Module Loader](DEBUG): Loading Module at Modules/Science.so
2015-03-31T22:15:27.779Z,1427840127.779 [Module Loader](DEBUG): Loaded Module: Science (Contains the science components)
2015-03-31T22:15:27.779Z,1427840127.779 [Module Loader](DEBUG): Loading Module at Modules/Sensor.so
2015-03-31T22:15:28.431Z,1427840128.431 [DataOverHttps] Loaded
2015-03-31T22:15:28.431Z,1427840128.431 [ComponentRegistry](DEBUG): SyncComponent "DataOverHttps" handled in the control thread.
2015-03-31T22:15:28.515Z,1427840128.515 [Depth_Keller] Loaded
2015-03-31T22:15:28.516Z,1427840128.516 [ComponentRegistry](DEBUG): SyncComponent "Depth_Keller" handled in the control thread.
2015-03-31T22:15:28.521Z,1427840128.521 [DropWeight] Loaded
2015-03-31T22:15:28.521Z,1427840128.521 [ComponentRegistry](DEBUG): SyncComponent "DropWeight" handled in the control thread.
2015-03-31T22:15:28.619Z,1427840128.619 [NAL9602] Loaded
2015-03-31T22:15:28.619Z,1427840128.619 [ComponentRegistry](DEBUG): SyncComponent "NAL9602" handled in the control thread.
2015-03-31T22:15:28.662Z,1427840128.662 [Onboard] Loaded
2015-03-31T22:15:28.663Z,1427840128.663 [ComponentRegistry](DEBUG): SyncComponent "Onboard" handled in the control thread.
2015-03-31T22:15:28.670Z,1427840128.670 [Radio_Surface] Loaded
2015-03-31T22:15:28.670Z,1427840128.670 [ComponentRegistry](DEBUG): Component "Radio_Surface" handled in its own thread.
2015-03-31T22:15:28.671Z,1427840128.671 [Radio_Surface ThreadHandler](DEBUG): Created PCaller Thread at 4080C4E0
2015-03-31T22:15:28.672Z,1427840128.672 [Radio_Surface ThreadHandler](INFO): Protected caller Thread ID is 853
2015-03-31T22:15:28.862Z,1427840128.862 [PNI_TCM] Loaded
2015-03-31T22:15:28.863Z,1427840128.863 [ComponentRegistry](DEBUG): SyncComponent "PNI_TCM" handled in the control thread.
2015-03-31T22:15:29.051Z,1427840129.051 [Rowe_600] Loaded
2015-03-31T22:15:29.052Z,1427840129.052 [ComponentRegistry](DEBUG): SyncComponent "Rowe_600" handled in the control thread.
2015-03-31T22:15:31.029Z,1427840131.029 [BPC1] Loaded
2015-03-31T22:15:31.029Z,1427840131.029 [ComponentRegistry](DEBUG): SyncComponent "BPC1" handled in the control thread.
2015-03-31T22:15:31.030Z,1427840131.030 [Module Loader](DEBUG): Loaded Module: Sensor (Contains the sensor components)
2015-03-31T22:15:31.030Z,1427840131.030 [Module Loader](DEBUG): Loading Module at Modules/Servo.so
2015-03-31T22:15:34.799Z,1427840134.799 [BuoyancyServo] Loaded
2015-03-31T22:15:34.800Z,1427840134.800 [ComponentRegistry](DEBUG): SyncComponent "BuoyancyServo" handled in the control thread.
2015-03-31T22:15:34.812Z,1427840134.812 [ElevatorServo] Loaded
2015-03-31T22:15:34.812Z,1427840134.812 [ComponentRegistry](DEBUG): SyncComponent "ElevatorServo" handled in the control thread.
2015-03-31T22:15:34.824Z,1427840134.824 [MassServo] Loaded
2015-03-31T22:15:34.824Z,1427840134.824 [ComponentRegistry](DEBUG): SyncComponent "MassServo" handled in the control thread.
2015-03-31T22:15:34.836Z,1427840134.836 [RudderServo] Loaded
2015-03-31T22:15:34.837Z,1427840134.837 [ComponentRegistry](DEBUG): SyncComponent "RudderServo" handled in the control thread.
2015-03-31T22:15:34.848Z,1427840134.848 [ThrusterServo] Loaded
2015-03-31T22:15:34.849Z,1427840134.849 [ComponentRegistry](DEBUG): SyncComponent "ThrusterServo" handled in the control thread.
2015-03-31T22:15:34.849Z,1427840134.849 [Module Loader](DEBUG): Loaded Module: Servo (This is the module containing motor controllers)
2015-03-31T22:15:34.850Z,1427840134.850 [Module Loader](DEBUG): Loading Module at Modules/Simulator.so
2015-03-31T22:15:41.080Z,1427840141.080 [Module Loader](DEBUG): Loaded Module: Simulator (This is the module containing the Simulator)
2015-03-31T22:15:41.081Z,1427840141.081 [Module Loader](DEBUG): Loading Module at Modules/Trigger.so
2015-03-31T22:15:41.122Z,1427840141.122 [Module Loader](DEBUG): Loaded Module: Trigger (Contains triggers for use in missions)
2015-03-31T22:15:41.124Z,1427840141.124 [ComponentRegistry](DEBUG): SyncComponent "MissionManager" handled in the control thread.
2015-03-31T22:15:41.125Z,1427840141.125 [ComponentRegistry](DEBUG): SyncComponent "Reporter" handled in the control thread.
2015-03-31T22:15:41.132Z,1427840141.132 [ComponentRegistry](DEBUG): Component "NavChartDb" handled in its own thread.
2015-03-31T22:15:41.133Z,1427840141.133 [NavChartDb ThreadHandler](DEBUG): Created PCaller Thread at 408BD4E0
2015-03-31T22:15:41.133Z,1427840141.133 [NavChartDb ThreadHandler](INFO): Protected caller Thread ID is 855
2015-03-31T22:15:41.138Z,1427840141.138 [Supervisor](INFO): Main Thread ID is 767
2015-03-31T22:15:41.138Z,1427840141.138 [Supervisor](DEBUG): Running supervisor.
2015-03-31T22:15:41.139Z,1427840141.139 [CommandLine ThreadHandler](INFO): Handler Thread ID is 856
2015-03-31T22:15:41.142Z,1427840141.142 [controlThread ThreadHandler](INFO): Handler Thread ID is 857
2015-03-31T22:15:41.142Z,1427840141.142 [controlThread](DEBUG): Initializing ControlThread
2015-03-31T22:15:41.143Z,1427840141.143 [VerticalControl](DEBUG): Initialize VerticalControlComponent.
2015-03-31T22:15:41.145Z,1427840141.145 [HorizontalControl](DEBUG): Initialize HorizontalControlComponent.
2015-03-31T22:15:41.146Z,1427840141.146 [SpeedControl](DEBUG): Initialize SpeedControlComponent.
2015-03-31T22:15:41.146Z,1427840141.146 [LoopControl](DEBUG): Initialize LoopControlComponent.
2015-03-31T22:15:41.146Z,1427840141.146 [SBIT](INFO): Initialize SBIT Component.
2015-03-31T22:15:41.147Z,1427840141.147 [SBIT](IMPORTANT): Tethys CM Info: SVN revision:12051
2015-03-31T22:15:41.147Z,1427840141.147 [SBIT](IMPORTANT): Kernel Release: 2.6.27.8
2015-03-31T22:15:41.147Z,1427840141.147 [SBIT](IMPORTANT): Kernel Version:#639 PREEMPT Wed Mar 12 12:53:33 PDT 2014
2015-03-31T22:15:41.148Z,1427840141.148 [IBIT](INFO): Initialize IBIT Component.
2015-03-31T22:15:41.149Z,1427840141.149 [CBIT](DEBUG): Initialize CBIT Component.
2015-03-31T22:15:41.149Z,1427840141.149 [CBIT](FAULT): LAST RESTART WAS UNINTENTIONAL.
2015-03-31T22:15:41.149Z,1427840141.149 [CBIT](INFO): Last reboot was NOT due to watchdog timer.
2015-03-31T22:15:41.150Z,1427840141.150 [logger ThreadHandler](INFO): Handler Thread ID is 858
2015-03-31T22:15:41.171Z,1427840141.171 [Radio_Surface ThreadHandler](INFO): Handler Thread ID is 859
2015-03-31T22:15:41.175Z,1427840141.175 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2015-03-31T22:15:41.175Z,1427840141.175 [PitchRateCalculator](DEBUG): Initializing PitchRateCalculator.
2015-03-31T22:15:41.176Z,1427840141.176 [SpeedCalculator](DEBUG): Initializing SpeedCalculator.
2015-03-31T22:15:41.176Z,1427840141.176 [TempGradientCalculator](DEBUG): Initializing TempGradientCalculator.
2015-03-31T22:15:41.177Z,1427840141.177 [YawRateCalculator](DEBUG): Initializing YawRateCalculator.
2015-03-31T22:15:41.178Z,1427840141.178 [HFRCMReconstructedInterpolator](INFO): Initializing HFRCMReconstructedInterpolator component with velocityAccuracy_ = 0.300000 m/s.
2015-03-31T22:15:41.179Z,1427840141.179 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2015-03-31T22:15:41.180Z,1427840141.180 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2015-03-31T22:15:41.180Z,1427840141.180 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2015-03-31T22:15:41.181Z,1427840141.181 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2015-03-31T22:15:41.181Z,1427840141.181 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2015-03-31T22:15:41.181Z,1427840141.181 [NavChart](DEBUG): Initialize NavChart Navigation.
2015-03-31T22:15:41.182Z,1427840141.182 [UniversalFixResidualReporter](DEBUG): Initializing UniversalFixResidualReporter component.
2015-03-31T22:15:41.187Z,1427840141.187 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2015-03-31T22:15:41.187Z,1427840141.187 [DropWeight] Hardware Fault, FailCount= 1
2015-03-31T22:15:41.187Z,1427840141.187 [DropWeight](ERROR): Hardware Fault
2015-03-31T22:15:41.190Z,1427840141.190 [MissionManager](INFO): Loading Mission: Missions/Startup.xml
2015-03-31T22:15:41.192Z,1427840141.192 [Radio_Surface](INFO): Powering up
2015-03-31T22:15:41.204Z,1427840141.204 [NavChartDb ThreadHandler](INFO): Handler Thread ID is 860
2015-03-31T22:15:41.218Z,1427840141.218 [NavChartDb](INFO): Looking for Electronic Nav Chart files in directory: Resources
2015-03-31T22:15:41.218Z,1427840141.218 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US1WC07M.000
2015-03-31T22:15:41.219Z,1427840141.219 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US2WC11M.000
2015-03-31T22:15:41.219Z,1427840141.219 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US3CA52M.000
2015-03-31T22:15:41.219Z,1427840141.219 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US4CA60M.000
2015-03-31T22:15:41.220Z,1427840141.220 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA50M.000
2015-03-31T22:15:41.220Z,1427840141.220 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA61M.000
2015-03-31T22:15:41.220Z,1427840141.220 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA62M.000
2015-03-31T22:15:41.221Z,1427840141.221 [NavChartDb](INFO): Already Loaded Electronic Nav Chart data from US5CA83M.000
2015-03-31T22:15:41.248Z,1427840141.248 [Startup:A.GoToSurface](DEBUG): Construct GoToSurface.
2015-03-31T22:15:41.284Z,1427840141.284 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
       xmlns:Control="Tethys/Control"
       xmlns:Guidance="Tethys/Guidance" 
       xmlns:Units="Tethys/Units"
       xmlns:Universal="Tethys/Universal"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="Tethys http://aosn.mbari.org/tethys/Xml/Tethys.xsd
                           Tethys/Control http://aosn.mbari.org/tethys/Xml/Control.xsd
                           Tethys/Guidance http://aosn.mbari.org/tethys/Xml/Guidance.xsd
                           Tethys/Units http://aosn.mbari.org/tethys/Xml/Units.xsd
                           Tethys/Universal http://aosn.mbari.org/tethys/Xml/Universal.xsd"
       Id="Startup">

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="StartupSatComms">

        <Sequence/>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:latitude_fix/>
        </ReadDatum>

        <ReadDatum>
            <Timeout Duration="P1M" />
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

</Mission>


2015-03-31T22:15:41.285Z,1427840141.285 [MissionManager](INFO): Loading Mission: Missions/Default.xml
2015-03-31T22:15:41.379Z,1427840141.379 [MissionManager](INFO): DefineArg Default.TimeMissionWasStarted = 0.000000 h
2015-03-31T22:15:41.383Z,1427840141.383 [MissionManager](INFO): DefineArg Default.ElapsedSinceMissionWasStarted = 0.000000 h
2015-03-31T22:15:41.403Z,1427840141.403 [Default:B.GoToSurface](DEBUG): Construct GoToSurface.
2015-03-31T22:15:41.428Z,1427840141.428 [Default:CheckIn:A.SetSpeed](DEBUG): Construct.
2015-03-31T22:15:41.434Z,1427840141.434 [Default:CheckIn:Read_Iridium:A_Timeout:A.Execute](DEBUG): Construct Execute.
2015-03-31T22:15:41.463Z,1427840141.463 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Construct.
2015-03-31T22:15:41.497Z,1427840141.497 [MissionManager](DEBUG): 
<?xml version="1.0" encoding="UTF-8"?>
<Mission xmlns="Tethys"
xmlns:Control="Tethys/Control"
xmlns:Guidance="Tethys/Guidance" 
xmlns:Units="Tethys/Units"
xmlns:Universal="Tethys/Universal"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="Tethys http://aosn.mbari.org/tethys/Xml/Tethys.xsd
Tethys/Control http://aosn.mbari.org/tethys/Xml/Control.xsd
Tethys/Guidance http://aosn.mbari.org/tethys/Xml/Guidance.xsd
Tethys/Units http://aosn.mbari.org/tethys/Xml/Units.xsd
Tethys/Universal http://aosn.mbari.org/tethys/Xml/Universal.xsd"
Id="Default">

    <DefineArg Name="TimeMissionWasStarted"><Units:hour/><Value>0</Value></DefineArg>

    <DefineArg Name="ElapsedSinceMissionWasStarted"><Units:hour/><Value>0</Value></DefineArg>

    <Aggregate Id="StartClock">

        <Sequence/>

        <Assign><Arg Name="TimeMissionWasStarted"/><Universal:time/></Assign>

    </Aggregate>

    <Guidance:GoToSurface>
        <Progression/>
    </Guidance:GoToSurface>

    <Aggregate Id="CheckIn">

        <When>
            <Elapsed><Universal:platform_communications/></Elapsed>
            <Gt><Units:minute/><Value>5.0</Value></Gt>
            <And><Universal:platform_conversation/><Eq><True/></Eq></And>
            <Or><Elapsed><Universal:platform_communications/></Elapsed><Gt><Units:hour/><Value>1.0</Value></Gt></Or>
        </When>

<!-- TODO: Do we really want this When operating on platform_communications? or on something else like time_fix? -->

<!-- Run application at high speed -->

        <Guidance:SetSpeed>
            <Parallel/>
            <Setting><Guidance:SetSpeed.period/><Units:millisecond/><Value>400</Value></Setting>
        </Guidance:SetSpeed>

        <ReadDatum Id="Read_GPS">
            <Timeout Duration="P5M"/>
<!-- NOTE: Original Default.xml didn't have a timeout on the GPS read, so theoretically could have hung indefinitely there... -->
            <Universal:latitude_fix/>
        </ReadDatum>

<!-- Do data comms -->

        <ReadDatum Id="Read_Iridium">
            <Timeout Duration="P2H">
                <Guidance:Execute>
                    <Sequence/>
                    <Setting><Guidance:Execute.command/><String>Burn 300</String></Setting>
                </Guidance:Execute>
                <Syslog Severity="Critical">Dropped drop weight due to communications timeout</Syslog>
            </Timeout>
            <Universal:platform_communications/>
        </ReadDatum>

    </Aggregate>

    <Aggregate Id="UpdateAndReportMinutesSinceMissionStarted">

        <When>
            <Elapsed><Arg Name="ElapsedSinceMissionWasStarted"/></Elapsed>
            <Gt><Units:minute/><Value>5.0</Value></Gt>
        </When>

        <Assign><Arg Name="ElapsedSinceMissionWasStarted"/><Universal:time/><Sub><Arg Name="TimeMissionWasStarted"/></Sub></Assign>

        <Syslog Severity="Important">Default mission has been running for <Arg Name="ElapsedSinceMissionWasStarted"/><Units:minute/></Syslog>

    </Aggregate>

    <Aggregate Id="WaitAtTheSurface">

        <Sequence/>

        <Guidance:SetSpeed Id="RunApplicationAtLowSpeed">
            <Parallel/>
            <Setting><Guidance:SetSpeed.period/><Units:second/><Value>5</Value></Setting>
        </Guidance:SetSpeed>

    </Aggregate>

</Mission>


2015-03-31T22:15:41.509Z,1427840141.509 [controlThread](DEBUG): Component order: CycleStarter,DataOverHttps,Depth_Keller,DropWeight,NAL9602,Onboard,PNI_TCM,Rowe_600,BPC1,Depth_Keller,DepthRateCalculator,PitchRateCalculator,SpeedCalculator,TempGradientCalculator,YawRateCalculator,HFRCMReconstructedInterpolator,DeadReckonUsingMultipleVelocitySources,DeadReckonUsingSpeedCalculator,DeadReckonWithRespectToWater,DeadReckonWithRespectToSeafloor,DeadReckonUsingDVLWaterTrack,NavChart,UniversalFixResidualReporter,MissionManager,VerticalControl,HorizontalControl,SpeedControl,LoopControl,BuoyancyServo,ElevatorServo,MassServo,RudderServo,ThrusterServo,SBIT,IBIT,CBIT,Reporter,LogSplitter,
2015-03-31T22:15:41.628Z,1427840141.628 [NAL9602](INFO): Powering up NAL9602
2015-03-31T22:15:41.715Z,1427840141.715 [Rowe_600](INFO): Initializing
2015-03-31T22:15:41.724Z,1427840141.724 [Rowe_600](INFO): Powering up
2015-03-31T22:15:41.926Z,1427840141.926 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:41.945Z,1427840141.945 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:15:42.086Z,1427840142.086 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:42.253Z,1427840142.253 [BuoyancyServo](DEBUG): Initializing BuoyancyServo.
2015-03-31T22:15:42.269Z,1427840142.269 [ElevatorServo](DEBUG): Initializing ElevatorServo.
2015-03-31T22:15:42.281Z,1427840142.281 [MassServo](DEBUG): Initializing MassServo.
2015-03-31T22:15:42.293Z,1427840142.293 [RudderServo](DEBUG): Initializing RudderServo.
2015-03-31T22:15:42.305Z,1427840142.305 [ThrusterServo](DEBUG): Initializing ThrusterServo.
2015-03-31T22:15:42.341Z,1427840142.341 [CommandLine](FAULT): Scheduling is paused
2015-03-31T22:15:42.343Z,1427840142.343 [CBIT](ERROR): Hardware Fault in component: DropWeight
2015-03-31T22:15:42.344Z,1427840142.344 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2015-03-31T22:15:42.624Z,1427840142.624 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:42.625Z,1427840142.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:15:42.627Z,1427840142.627 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:42.811Z,1427840142.811 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:42.812Z,1427840142.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:15:42.813Z,1427840142.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:43.385Z,1427840143.385 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:43.386Z,1427840143.386 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:15:43.395Z,1427840143.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:43.679Z,1427840143.679 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:43.680Z,1427840143.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:15:43.681Z,1427840143.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:44.183Z,1427840144.183 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:44.192Z,1427840144.192 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:15:44.194Z,1427840144.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:44.427Z,1427840144.427 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:44.429Z,1427840144.429 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:44.860Z,1427840144.860 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:44.861Z,1427840144.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:45.284Z,1427840145.284 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:45.294Z,1427840145.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:45.678Z,1427840145.678 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:45.680Z,1427840145.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:46.263Z,1427840146.263 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:46.272Z,1427840146.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:46.444Z,1427840146.444 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:46.446Z,1427840146.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:46.844Z,1427840146.844 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:46.854Z,1427840146.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:47.444Z,1427840147.444 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:47.454Z,1427840147.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:47.650Z,1427840147.650 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:47.652Z,1427840147.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:48.039Z,1427840148.039 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:48.041Z,1427840148.041 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:48.415Z,1427840148.415 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:48.417Z,1427840148.417 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:48.808Z,1427840148.808 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:48.810Z,1427840148.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:49.222Z,1427840149.222 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:49.224Z,1427840149.224 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:49.645Z,1427840149.645 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:49.647Z,1427840149.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:50.010Z,1427840150.010 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:50.012Z,1427840150.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:50.420Z,1427840150.420 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:50.422Z,1427840150.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:50.812Z,1427840150.812 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:50.813Z,1427840150.813 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:51.207Z,1427840151.207 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:15:51.228Z,1427840151.228 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:51.238Z,1427840151.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:51.656Z,1427840151.656 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:15:51.658Z,1427840151.658 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:15:54.067Z,1427840154.067 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:54.069Z,1427840154.069 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:54.182Z,1427840154.182 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:15:54.183Z,1427840154.183 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:15:54.213Z,1427840154.213 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:54.215Z,1427840154.215 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:54.685Z,1427840154.685 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:15:54.686Z,1427840154.686 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:15:54.815Z,1427840154.815 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:54.829Z,1427840154.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:54.914Z,1427840154.914 [NAL9602](INFO): NAL9602 initialized
2015-03-31T22:15:55.051Z,1427840155.051 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:15:55.073Z,1427840155.073 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:15:55.074Z,1427840155.074 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:15:55.211Z,1427840155.211 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:55.223Z,1427840155.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:55.604Z,1427840155.604 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:15:55.634Z,1427840155.634 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:15:55.635Z,1427840155.635 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:15:55.687Z,1427840155.687 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:55.694Z,1427840155.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:56.268Z,1427840156.268 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:15:56.269Z,1427840156.269 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:15:56.445Z,1427840156.445 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:56.455Z,1427840156.455 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:56.769Z,1427840156.769 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:15:56.770Z,1427840156.770 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:15:56.909Z,1427840156.909 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:56.911Z,1427840156.911 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:56.942Z,1427840156.942 [SBIT](IMPORTANT): Beginning Startup BIT
2015-03-31T22:15:56.957Z,1427840156.957 [CBIT](IMPORTANT): Beginning GF scan
2015-03-31T22:15:57.098Z,1427840157.098 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:15:57.099Z,1427840157.099 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:15:57.141Z,1427840157.141 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:57.143Z,1427840157.143 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:57.583Z,1427840157.583 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:15:57.593Z,1427840157.593 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:15:57.741Z,1427840157.741 [BPC1](ERROR): Failed to receive battery data
2015-03-31T22:15:57.741Z,1427840157.741 [BPC1] Communications Fault, FailCount= 1
2015-03-31T22:15:57.741Z,1427840157.741 [BPC1](ERROR): Communications Fault
2015-03-31T22:15:57.747Z,1427840157.747 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:57.757Z,1427840157.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:57.790Z,1427840157.790 [CBIT](ERROR): Communications Fault in component: BPC1
2015-03-31T22:15:57.917Z,1427840157.917 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:15:57.917Z,1427840157.917 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:15:57.960Z,1427840157.960 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:57.970Z,1427840157.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:58.400Z,1427840158.400 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:15:58.401Z,1427840158.401 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:15:58.552Z,1427840158.552 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:58.575Z,1427840158.575 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:58.999Z,1427840158.999 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:15:58.999Z,1427840158.999 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:15:59.119Z,1427840159.119 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:15:59.145Z,1427840159.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:15:59.342Z,1427840159.342 [CBIT](INFO): Clearing failed state for component BPC1
2015-03-31T22:15:59.343Z,1427840159.343 [BPC1] No Fault, FailCount= 1
2015-03-31T22:15:59.593Z,1427840159.593 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:15:59.594Z,1427840159.594 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:00.217Z,1427840160.217 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:00.218Z,1427840160.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:00.666Z,1427840160.666 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:00.666Z,1427840160.666 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:00.731Z,1427840160.731 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:00.733Z,1427840160.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:00.940Z,1427840160.940 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:00.940Z,1427840160.940 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:00.986Z,1427840160.986 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:00.988Z,1427840160.988 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:01.462Z,1427840161.462 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:01.463Z,1427840161.463 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:01.528Z,1427840161.528 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:01.529Z,1427840161.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:01.948Z,1427840161.948 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:01.948Z,1427840161.948 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:02.109Z,1427840162.109 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:02.139Z,1427840162.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:02.529Z,1427840162.529 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:02.531Z,1427840162.531 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:02.698Z,1427840162.698 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:02.700Z,1427840162.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:03.098Z,1427840163.098 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:03.098Z,1427840163.098 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:03.208Z,1427840163.208 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:03.246Z,1427840163.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:03.636Z,1427840163.636 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:03.637Z,1427840163.637 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:03.857Z,1427840163.857 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:03.868Z,1427840163.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:04.166Z,1427840164.166 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:04.166Z,1427840164.166 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:04.310Z,1427840164.310 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:04.320Z,1427840164.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:04.445Z,1427840164.445 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:04.445Z,1427840164.445 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:04.492Z,1427840164.492 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:04.494Z,1427840164.494 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:05.166Z,1427840165.166 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:05.166Z,1427840165.166 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:05.204Z,1427840165.204 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:05.214Z,1427840165.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:05.347Z,1427840165.347 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:05.347Z,1427840165.347 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:05.385Z,1427840165.385 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:05.387Z,1427840165.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:05.943Z,1427840165.943 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:05.944Z,1427840165.944 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:06.117Z,1427840166.117 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:06.141Z,1427840166.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:06.537Z,1427840166.537 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:06.546Z,1427840166.546 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:06.765Z,1427840166.765 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:06.789Z,1427840166.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:07.193Z,1427840167.193 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:07.194Z,1427840167.194 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:07.296Z,1427840167.296 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:07.321Z,1427840167.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:07.683Z,1427840167.683 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:07.692Z,1427840167.692 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:07.898Z,1427840167.898 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:07.916Z,1427840167.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:08.097Z,1427840168.097 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:08.097Z,1427840168.097 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:08.132Z,1427840168.132 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:08.142Z,1427840168.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:08.707Z,1427840168.707 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:08.709Z,1427840168.709 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:08.892Z,1427840168.892 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:08.893Z,1427840168.893 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:09.007Z,1427840169.007 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:09.007Z,1427840169.007 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:09.045Z,1427840169.045 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:09.055Z,1427840169.055 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:09.576Z,1427840169.576 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:09.578Z,1427840169.578 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:09.741Z,1427840169.741 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:09.743Z,1427840169.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:10.160Z,1427840170.160 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:10.162Z,1427840170.162 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:10.373Z,1427840170.373 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:10.398Z,1427840170.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:10.516Z,1427840170.516 [SBIT](ERROR): Could not read elevatorAngleReader_.
2015-03-31T22:16:10.516Z,1427840170.516 [SBIT](ERROR): Could not read rudderAngleReader_.
2015-03-31T22:16:10.516Z,1427840170.516 [SBIT](ERROR): Could not read massPosReader_.
2015-03-31T22:16:10.830Z,1427840170.830 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:10.831Z,1427840170.831 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:10.979Z,1427840170.979 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:11.006Z,1427840171.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:11.352Z,1427840171.352 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:11.352Z,1427840171.352 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:11.557Z,1427840171.557 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:11.591Z,1427840171.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:11.808Z,1427840171.808 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:11.808Z,1427840171.808 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:11.870Z,1427840171.870 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:11.872Z,1427840171.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:12.210Z,1427840172.210 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:12.210Z,1427840172.210 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:12.412Z,1427840172.412 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:12.436Z,1427840172.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:12.671Z,1427840172.671 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:12.671Z,1427840172.671 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:12.737Z,1427840172.737 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:12.739Z,1427840172.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:13.063Z,1427840173.063 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:13.063Z,1427840173.063 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:13.211Z,1427840173.211 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:13.228Z,1427840173.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:13.637Z,1427840173.637 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:13.654Z,1427840173.654 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:13.828Z,1427840173.828 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:13.830Z,1427840173.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:14.238Z,1427840174.238 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:14.239Z,1427840174.239 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:14.366Z,1427840174.366 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:14.390Z,1427840174.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:14.837Z,1427840174.837 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:14.838Z,1427840174.838 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:14.999Z,1427840174.999 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:15.009Z,1427840175.009 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:15.320Z,1427840175.320 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:15.321Z,1427840175.321 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:15.444Z,1427840175.444 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:15.446Z,1427840175.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:15.567Z,1427840175.567 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:15.568Z,1427840175.568 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:15.609Z,1427840175.609 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:15.611Z,1427840175.611 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:16.071Z,1427840176.071 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:16.072Z,1427840176.072 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:16.286Z,1427840176.286 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:16.288Z,1427840176.288 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:16.392Z,1427840176.392 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:16.392Z,1427840176.392 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:16.439Z,1427840176.439 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:16.441Z,1427840176.441 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:16.952Z,1427840176.952 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:16.953Z,1427840176.953 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:17.163Z,1427840177.163 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:17.165Z,1427840177.165 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:17.627Z,1427840177.627 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:17.632Z,1427840177.632 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:17.925Z,1427840177.925 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:17.927Z,1427840177.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:18.384Z,1427840178.384 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:18.393Z,1427840178.393 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:18.594Z,1427840178.594 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:18.623Z,1427840178.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:18.994Z,1427840178.994 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:18.995Z,1427840178.995 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:19.156Z,1427840179.156 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:19.170Z,1427840179.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:19.306Z,1427840179.306 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:19.307Z,1427840179.307 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:19.345Z,1427840179.345 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:19.359Z,1427840179.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:19.881Z,1427840179.881 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:19.883Z,1427840179.883 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:20.016Z,1427840180.016 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:20.018Z,1427840180.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:20.168Z,1427840180.168 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:20.168Z,1427840180.168 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:20.206Z,1427840180.206 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:20.216Z,1427840180.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:20.623Z,1427840180.623 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:20.624Z,1427840180.624 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:20.831Z,1427840180.831 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:20.862Z,1427840180.862 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:21.250Z,1427840181.250 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:21.251Z,1427840181.251 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:21.276Z,1427840181.276 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:21.280Z,1427840181.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:21.890Z,1427840181.890 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:21.899Z,1427840181.899 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:22.037Z,1427840182.037 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:22.047Z,1427840182.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:22.438Z,1427840182.438 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:22.439Z,1427840182.439 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:22.485Z,1427840182.485 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:22.487Z,1427840182.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:22.880Z,1427840182.880 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:22.881Z,1427840182.881 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:22.919Z,1427840182.919 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:22.929Z,1427840182.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:23.138Z,1427840183.138 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:23.139Z,1427840183.139 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:23.216Z,1427840183.216 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:23.226Z,1427840183.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:23.735Z,1427840183.735 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64a4]
2015-03-31T22:16:23.735Z,1427840183.735 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64f4]
2015-03-31T22:16:23.809Z,1427840183.809 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:23.811Z,1427840183.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:23.841Z,1427840183.841 [CBIT](IMPORTANT): No ground fault detected
2015-03-31T22:16:23.940Z,1427840183.940 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:23.940Z,1427840183.940 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:23.969Z,1427840183.969 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:23.979Z,1427840183.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:24.592Z,1427840184.592 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:16:24.651Z,1427840184.651 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:24.675Z,1427840184.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:25.048Z,1427840185.048 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:25.049Z,1427840185.049 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:25.274Z,1427840185.274 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:25.298Z,1427840185.298 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:25.671Z,1427840185.671 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:25.681Z,1427840185.681 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:25.781Z,1427840185.781 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:25.804Z,1427840185.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:26.157Z,1427840186.157 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:26.158Z,1427840186.158 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:26.253Z,1427840186.253 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:26.278Z,1427840186.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:26.613Z,1427840186.613 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:26.613Z,1427840186.613 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:26.681Z,1427840186.681 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:26.695Z,1427840186.695 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:26.956Z,1427840186.956 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:26.956Z,1427840186.956 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:27.013Z,1427840187.013 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:27.023Z,1427840187.023 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:27.459Z,1427840187.459 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:27.460Z,1427840187.460 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:27.532Z,1427840187.532 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:27.534Z,1427840187.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:27.771Z,1427840187.771 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:27.772Z,1427840187.772 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:27.809Z,1427840187.809 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:27.810Z,1427840187.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:28.291Z,1427840188.291 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:16:28.318Z,1427840188.318 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:28.345Z,1427840188.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:28.693Z,1427840188.693 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:28.693Z,1427840188.693 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:28.827Z,1427840188.827 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:28.851Z,1427840188.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:29.278Z,1427840189.278 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:29.279Z,1427840189.279 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:29.439Z,1427840189.439 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:29.444Z,1427840189.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:29.849Z,1427840189.849 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:29.849Z,1427840189.849 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:29.910Z,1427840189.910 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:29.950Z,1427840189.950 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:30.342Z,1427840190.342 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:30.342Z,1427840190.342 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:30.375Z,1427840190.375 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:30.385Z,1427840190.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:30.718Z,1427840190.718 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:30.718Z,1427840190.718 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:30.755Z,1427840190.755 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:30.757Z,1427840190.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:31.174Z,1427840191.174 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:31.174Z,1427840191.174 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:31.211Z,1427840191.211 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:31.221Z,1427840191.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:31.531Z,1427840191.531 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:31.531Z,1427840191.531 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:31.560Z,1427840191.560 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:31.570Z,1427840191.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:32.012Z,1427840192.012 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:32.012Z,1427840192.012 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:32.122Z,1427840192.122 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:32.137Z,1427840192.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:32.643Z,1427840192.643 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:32.645Z,1427840192.645 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:32.777Z,1427840192.777 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:32.787Z,1427840192.787 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:33.167Z,1427840193.167 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:33.168Z,1427840193.168 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:33.293Z,1427840193.293 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:33.320Z,1427840193.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:33.596Z,1427840193.596 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:33.605Z,1427840193.605 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:33.700Z,1427840193.700 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:33.729Z,1427840193.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:34.070Z,1427840194.070 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:34.070Z,1427840194.070 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:34.114Z,1427840194.114 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:34.116Z,1427840194.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:34.415Z,1427840194.415 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:34.416Z,1427840194.416 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:34.452Z,1427840194.452 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:34.462Z,1427840194.462 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:34.869Z,1427840194.869 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:16:34.883Z,1427840194.883 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:34.885Z,1427840194.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:35.213Z,1427840195.213 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:35.213Z,1427840195.213 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:35.250Z,1427840195.250 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:35.257Z,1427840195.257 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:36.000Z,1427840196.000 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:36.005Z,1427840196.005 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:36.146Z,1427840196.146 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:36.166Z,1427840196.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:36.540Z,1427840196.540 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:36.550Z,1427840196.550 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:36.734Z,1427840196.734 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:36.753Z,1427840196.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:37.127Z,1427840197.127 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:37.128Z,1427840197.128 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:37.300Z,1427840197.300 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:37.302Z,1427840197.302 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:37.331Z,1427840197.331 [SBIT](ERROR): Could not read elevatorAngleReader_.
2015-03-31T22:16:37.331Z,1427840197.331 [SBIT](ERROR): Could not read rudderAngleReader_.
2015-03-31T22:16:37.331Z,1427840197.331 [SBIT](ERROR): Could not read massPosReader_.
2015-03-31T22:16:37.332Z,1427840197.332 [SBIT](FAULT): Control surface position failure.
2015-03-31T22:16:37.656Z,1427840197.656 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:37.656Z,1427840197.656 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:37.770Z,1427840197.770 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:37.780Z,1427840197.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:37.882Z,1427840197.882 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:37.883Z,1427840197.883 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:37.928Z,1427840197.928 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:37.930Z,1427840197.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:38.547Z,1427840198.547 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:38.547Z,1427840198.547 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:38.604Z,1427840198.604 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:38.618Z,1427840198.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:38.739Z,1427840198.739 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:38.739Z,1427840198.739 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:38.780Z,1427840198.780 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:38.786Z,1427840198.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:39.314Z,1427840199.314 [Rowe_600](DEBUG): 2903 bytes available, but need 4084
2015-03-31T22:16:39.395Z,1427840199.395 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:39.422Z,1427840199.422 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:39.804Z,1427840199.804 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:39.804Z,1427840199.804 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:39.922Z,1427840199.922 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:39.955Z,1427840199.955 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:40.419Z,1427840200.419 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:40.420Z,1427840200.420 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:40.582Z,1427840200.582 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:40.584Z,1427840200.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:40.929Z,1427840200.929 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:40.930Z,1427840200.930 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:40.995Z,1427840200.995 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:41.005Z,1427840201.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:41.413Z,1427840201.413 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:41.413Z,1427840201.413 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:41.450Z,1427840201.450 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:41.452Z,1427840201.452 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:41.565Z,1427840201.565 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:41.565Z,1427840201.565 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:41.598Z,1427840201.598 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:41.600Z,1427840201.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:42.164Z,1427840202.164 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:42.165Z,1427840202.165 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:42.278Z,1427840202.278 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:42.280Z,1427840202.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:42.416Z,1427840202.416 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:42.416Z,1427840202.416 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:42.453Z,1427840202.453 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:42.463Z,1427840202.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:42.881Z,1427840202.881 [Rowe_600](DEBUG): 1344 bytes available, but need 4084
2015-03-31T22:16:42.953Z,1427840202.953 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:42.961Z,1427840202.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:43.381Z,1427840203.381 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:43.382Z,1427840203.382 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:43.515Z,1427840203.515 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:43.525Z,1427840203.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:43.917Z,1427840203.917 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:43.917Z,1427840203.917 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:44.063Z,1427840204.063 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:44.101Z,1427840204.101 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:44.558Z,1427840204.558 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:44.560Z,1427840204.560 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:44.685Z,1427840204.685 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:44.687Z,1427840204.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:44.992Z,1427840204.992 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:44.993Z,1427840204.993 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:45.128Z,1427840205.128 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:45.130Z,1427840205.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:45.256Z,1427840205.256 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:45.257Z,1427840205.257 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:45.311Z,1427840205.311 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:45.313Z,1427840205.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:45.809Z,1427840205.809 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:45.810Z,1427840205.810 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:45.972Z,1427840205.972 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:45.974Z,1427840205.974 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:46.109Z,1427840206.109 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:46.109Z,1427840206.109 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:46.146Z,1427840206.146 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:46.156Z,1427840206.156 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:46.539Z,1427840206.539 [Rowe_600](DEBUG): 744 bytes available, but need 4084
2015-03-31T22:16:46.578Z,1427840206.578 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:46.606Z,1427840206.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:46.934Z,1427840206.934 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:46.935Z,1427840206.935 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:47.151Z,1427840207.151 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:47.170Z,1427840207.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:47.487Z,1427840207.487 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:47.488Z,1427840207.488 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:47.629Z,1427840207.629 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:47.642Z,1427840207.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:48.027Z,1427840208.027 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:48.043Z,1427840208.043 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:48.214Z,1427840208.214 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:48.222Z,1427840208.222 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:48.447Z,1427840208.447 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:48.456Z,1427840208.456 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:48.590Z,1427840208.590 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:48.613Z,1427840208.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:48.900Z,1427840208.900 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:48.900Z,1427840208.900 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:48.945Z,1427840208.945 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:48.947Z,1427840208.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:49.320Z,1427840209.320 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:49.320Z,1427840209.320 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:49.485Z,1427840209.485 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:49.509Z,1427840209.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:49.746Z,1427840209.746 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:16:49.764Z,1427840209.764 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:49.774Z,1427840209.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:50.144Z,1427840210.144 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:50.144Z,1427840210.144 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:50.169Z,1427840210.169 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:50.175Z,1427840210.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:50.565Z,1427840210.565 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:16:50.732Z,1427840210.732 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:50.739Z,1427840210.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:50.833Z,1427840210.833 [SBIT](ERROR): Could not read elevatorAngleReader_.
2015-03-31T22:16:50.834Z,1427840210.834 [SBIT](ERROR): Could not read rudderAngleReader_.
2015-03-31T22:16:50.834Z,1427840210.834 [SBIT](ERROR): Could not read massPosReader_.
2015-03-31T22:16:50.834Z,1427840210.834 [SBIT](FAULT): Control surface position failure.
2015-03-31T22:16:50.957Z,1427840210.957 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:50.958Z,1427840210.958 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:51.086Z,1427840211.086 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:51.102Z,1427840211.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:51.208Z,1427840211.208 [SBIT](CRITICAL): SBIT FAILED
2015-03-31T22:16:51.367Z,1427840211.367 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:51.368Z,1427840211.368 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:51.537Z,1427840211.537 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:51.561Z,1427840211.561 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:51.631Z,1427840211.631 [MissionManager](IMPORTANT): Started mission Startup
2015-03-31T22:16:51.631Z,1427840211.631 [Startup] Running Loop=1
2015-03-31T22:16:51.631Z,1427840211.631 [Startup](INFO): Aggregate::initialize Startup
2015-03-31T22:16:51.632Z,1427840211.632 [Startup:A.GoToSurface] Running Loop=1
2015-03-31T22:16:51.633Z,1427840211.633 [Startup:A.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2015-03-31T22:16:51.635Z,1427840211.635 [Startup:A.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2015-03-31T22:16:51.637Z,1427840211.637 [Startup:A.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2015-03-31T22:16:51.639Z,1427840211.639 [Startup:A.GoToSurface](DEBUG): No speed setting specified. Using default value of 0.500000 m/s.
2015-03-31T22:16:51.707Z,1427840211.707 [Startup:StartupSatComms] Running Loop=1
2015-03-31T22:16:51.707Z,1427840211.707 [Startup:StartupSatComms](INFO): Aggregate::initialize Startup:StartupSatComms
2015-03-31T22:16:51.707Z,1427840211.707 [Startup:StartupSatComms:A] Running Loop=1
2015-03-31T22:16:52.098Z,1427840212.098 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:52.099Z,1427840212.099 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:52.135Z,1427840212.135 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:52.145Z,1427840212.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:52.166Z,1427840212.166 [Startup:StartupSatComms:A](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2015-03-31T22:16:52.542Z,1427840212.542 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:52.543Z,1427840212.543 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:52.590Z,1427840212.590 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:52.592Z,1427840212.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:52.756Z,1427840212.756 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:52.756Z,1427840212.756 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:52.783Z,1427840212.783 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:52.785Z,1427840212.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:53.356Z,1427840213.356 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:53.356Z,1427840213.356 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:53.452Z,1427840213.452 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:53.454Z,1427840213.454 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:53.585Z,1427840213.585 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:53.586Z,1427840213.586 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:53.716Z,1427840213.716 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:53.718Z,1427840213.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:54.117Z,1427840214.117 [Rowe_600](DEBUG): 2580 bytes available, but need 4084
2015-03-31T22:16:54.161Z,1427840214.161 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:54.168Z,1427840214.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:54.623Z,1427840214.623 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:54.624Z,1427840214.624 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:54.682Z,1427840214.682 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:54.707Z,1427840214.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:55.083Z,1427840215.083 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:55.084Z,1427840215.084 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:55.263Z,1427840215.263 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:55.300Z,1427840215.300 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:55.641Z,1427840215.641 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:55.642Z,1427840215.642 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:55.809Z,1427840215.809 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:55.819Z,1427840215.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:56.064Z,1427840216.064 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:56.066Z,1427840216.066 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:56.246Z,1427840216.246 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:56.247Z,1427840216.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:56.358Z,1427840216.358 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:56.358Z,1427840216.358 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:56.395Z,1427840216.395 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:56.405Z,1427840216.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:56.804Z,1427840216.804 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:56.806Z,1427840216.806 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:56.994Z,1427840216.994 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:57.018Z,1427840217.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:57.195Z,1427840217.195 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:57.195Z,1427840217.195 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:57.236Z,1427840217.236 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:57.246Z,1427840217.246 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:57.569Z,1427840217.569 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:57.579Z,1427840217.579 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:58.064Z,1427840218.064 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:58.065Z,1427840218.065 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:58.230Z,1427840218.230 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:58.254Z,1427840218.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:58.666Z,1427840218.666 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:58.667Z,1427840218.667 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:58.762Z,1427840218.762 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:58.771Z,1427840218.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:59.152Z,1427840219.152 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:59.153Z,1427840219.153 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:59.281Z,1427840219.281 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:59.306Z,1427840219.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:16:59.840Z,1427840219.840 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:16:59.854Z,1427840219.854 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:16:59.956Z,1427840219.956 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:16:59.970Z,1427840219.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:00.092Z,1427840220.092 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:00.092Z,1427840220.092 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:00.126Z,1427840220.126 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:00.128Z,1427840220.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:00.659Z,1427840220.659 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:00.660Z,1427840220.660 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:00.782Z,1427840220.782 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:00.791Z,1427840220.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:00.921Z,1427840220.921 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:00.921Z,1427840220.921 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:00.958Z,1427840220.958 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:00.972Z,1427840220.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:01.445Z,1427840221.445 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:01.447Z,1427840221.447 [Rowe_600](DEBUG): 2003 bytes available, but need 4084
2015-03-31T22:17:01.510Z,1427840221.510 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:01.552Z,1427840221.552 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:01.992Z,1427840221.992 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:02.014Z,1427840222.014 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:02.015Z,1427840222.015 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:02.086Z,1427840222.086 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:02.111Z,1427840222.111 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:02.533Z,1427840222.533 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:02.551Z,1427840222.551 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:02.682Z,1427840222.682 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:02.704Z,1427840222.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:03.061Z,1427840223.061 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:03.071Z,1427840223.071 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:03.204Z,1427840223.204 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:03.206Z,1427840223.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:03.624Z,1427840223.624 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:03.625Z,1427840223.625 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:03.687Z,1427840223.687 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:03.693Z,1427840223.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:03.801Z,1427840223.801 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:03.802Z,1427840223.802 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:03.851Z,1427840223.851 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:03.853Z,1427840223.853 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:04.399Z,1427840224.399 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:04.409Z,1427840224.409 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:04.544Z,1427840224.544 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:04.562Z,1427840224.562 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:04.910Z,1427840224.910 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:04.910Z,1427840224.910 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:04.947Z,1427840224.947 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:04.949Z,1427840224.949 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:05.346Z,1427840225.346 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:17:05.359Z,1427840225.359 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:05.361Z,1427840225.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:05.774Z,1427840225.774 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:05.783Z,1427840225.783 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:05.968Z,1427840225.968 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:05.991Z,1427840225.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:06.365Z,1427840226.365 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:06.367Z,1427840226.367 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:06.515Z,1427840226.515 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:06.525Z,1427840226.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:06.916Z,1427840226.916 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:06.932Z,1427840226.932 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:07.013Z,1427840227.013 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:07.038Z,1427840227.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:07.363Z,1427840227.363 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:07.363Z,1427840227.363 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:07.421Z,1427840227.421 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:07.431Z,1427840227.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:07.671Z,1427840227.671 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:07.671Z,1427840227.671 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:07.713Z,1427840227.713 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:07.723Z,1427840227.723 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:08.315Z,1427840228.315 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:08.315Z,1427840228.315 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:08.352Z,1427840228.352 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:08.354Z,1427840228.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:08.487Z,1427840228.487 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:08.487Z,1427840228.487 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:08.528Z,1427840228.528 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:08.530Z,1427840228.530 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:09.026Z,1427840229.026 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:09.037Z,1427840229.037 [Rowe_600](DEBUG): 3862 bytes available, but need 4084
2015-03-31T22:17:09.060Z,1427840229.060 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:09.062Z,1427840229.062 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:09.457Z,1427840229.457 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:09.459Z,1427840229.459 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:09.459Z,1427840229.459 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:09.654Z,1427840229.654 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:09.678Z,1427840229.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:10.038Z,1427840230.038 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:10.040Z,1427840230.040 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:10.214Z,1427840230.214 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:10.216Z,1427840230.216 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:10.619Z,1427840230.619 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:10.619Z,1427840230.619 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:10.657Z,1427840230.657 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:10.667Z,1427840230.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:11.058Z,1427840231.058 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:11.058Z,1427840231.058 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:11.095Z,1427840231.095 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:11.097Z,1427840231.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:11.280Z,1427840231.280 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:11.280Z,1427840231.280 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:11.319Z,1427840231.319 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:11.326Z,1427840231.326 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:11.933Z,1427840231.933 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:11.933Z,1427840231.933 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:11.968Z,1427840231.968 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:11.978Z,1427840231.978 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:12.098Z,1427840232.098 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:12.098Z,1427840232.098 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:12.127Z,1427840232.127 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:12.137Z,1427840232.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:12.664Z,1427840232.664 [Rowe_600](DEBUG): 2995 bytes available, but need 4084
2015-03-31T22:17:12.726Z,1427840232.726 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:12.751Z,1427840232.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:13.147Z,1427840233.147 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:13.147Z,1427840233.147 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:13.208Z,1427840233.208 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:13.232Z,1427840233.232 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:13.632Z,1427840233.632 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:13.633Z,1427840233.633 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:13.824Z,1427840233.824 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:13.849Z,1427840233.849 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:14.302Z,1427840234.302 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:14.302Z,1427840234.302 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:14.358Z,1427840234.358 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:14.364Z,1427840234.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:14.763Z,1427840234.763 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:14.764Z,1427840234.764 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:14.816Z,1427840234.816 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:14.834Z,1427840234.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:14.947Z,1427840234.947 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:14.947Z,1427840234.947 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:14.976Z,1427840234.976 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:14.986Z,1427840234.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:15.529Z,1427840235.529 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:15.530Z,1427840235.530 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:15.636Z,1427840235.636 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:15.637Z,1427840235.637 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:15.760Z,1427840235.760 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:15.761Z,1427840235.761 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:15.789Z,1427840235.789 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:15.799Z,1427840235.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:16.321Z,1427840236.321 [Rowe_600](DEBUG): 2386 bytes available, but need 4084
2015-03-31T22:17:16.383Z,1427840236.383 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:16.409Z,1427840236.409 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:16.837Z,1427840236.837 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:16.838Z,1427840236.838 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:16.883Z,1427840236.883 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:16.904Z,1427840236.904 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:17.279Z,1427840237.279 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:17.280Z,1427840237.280 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:17.474Z,1427840237.474 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:17.499Z,1427840237.499 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:17.900Z,1427840237.900 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:17.901Z,1427840237.901 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:18.083Z,1427840238.083 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:18.085Z,1427840238.085 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:18.477Z,1427840238.477 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:18.477Z,1427840238.477 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:18.550Z,1427840238.550 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:18.560Z,1427840238.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:18.685Z,1427840238.685 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:18.685Z,1427840238.685 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:18.722Z,1427840238.722 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:18.732Z,1427840238.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:19.269Z,1427840239.269 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:19.270Z,1427840239.270 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:19.367Z,1427840239.367 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:19.381Z,1427840239.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:19.668Z,1427840239.668 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:19.669Z,1427840239.669 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:19.707Z,1427840239.707 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:19.717Z,1427840239.717 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:20.136Z,1427840240.136 [Rowe_600](DEBUG): 3607 bytes available, but need 4084
2015-03-31T22:17:20.205Z,1427840240.205 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:20.242Z,1427840240.242 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:20.789Z,1427840240.789 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:20.791Z,1427840240.791 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:21.124Z,1427840241.124 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:21.158Z,1427840241.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:21.768Z,1427840241.768 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:21.768Z,1427840241.768 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:21.805Z,1427840241.805 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:21.807Z,1427840241.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:22.255Z,1427840242.255 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:22.255Z,1427840242.255 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:22.292Z,1427840242.292 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:22.294Z,1427840242.294 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:22.649Z,1427840242.649 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:22.649Z,1427840242.649 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:22.732Z,1427840242.732 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:22.760Z,1427840242.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:23.100Z,1427840243.100 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:23.100Z,1427840243.100 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:23.129Z,1427840243.129 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:23.139Z,1427840243.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:23.541Z,1427840243.541 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:23.542Z,1427840243.542 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:23.665Z,1427840243.665 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:23.681Z,1427840243.681 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:23.901Z,1427840243.901 [NAL9602](INFO): SBD MO Status=2, MOMSN=8266, MT Status=2, MTMSN=0
2015-03-31T22:17:23.901Z,1427840243.901 [NAL9602](ERROR): Failed to initiate SBD session. Error code: 2
2015-03-31T22:17:24.084Z,1427840244.084 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:24.085Z,1427840244.085 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:24.276Z,1427840244.276 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:24.277Z,1427840244.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:24.661Z,1427840244.661 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:24.662Z,1427840244.662 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:24.737Z,1427840244.737 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:24.760Z,1427840244.760 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:25.163Z,1427840245.163 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:25.164Z,1427840245.164 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:25.378Z,1427840245.378 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:25.403Z,1427840245.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:25.627Z,1427840245.627 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:25.628Z,1427840245.628 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:25.794Z,1427840245.794 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:25.816Z,1427840245.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:26.032Z,1427840246.032 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:26.032Z,1427840246.032 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:26.085Z,1427840246.085 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:26.091Z,1427840246.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:26.360Z,1427840246.360 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:26.360Z,1427840246.360 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:26.453Z,1427840246.453 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:26.478Z,1427840246.478 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:26.795Z,1427840246.795 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:26.803Z,1427840246.803 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:26.845Z,1427840246.845 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:26.847Z,1427840246.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:27.157Z,1427840247.157 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:27.158Z,1427840247.158 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:27.206Z,1427840247.206 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:27.208Z,1427840247.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:27.614Z,1427840247.614 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:17:27.627Z,1427840247.627 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:27.650Z,1427840247.650 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:28.082Z,1427840248.082 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:28.084Z,1427840248.084 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:28.258Z,1427840248.258 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:28.280Z,1427840248.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:28.551Z,1427840248.551 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:28.552Z,1427840248.552 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:28.683Z,1427840248.683 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:28.689Z,1427840248.689 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:29.062Z,1427840249.062 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:29.072Z,1427840249.072 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:29.179Z,1427840249.179 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:29.181Z,1427840249.181 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:29.573Z,1427840249.573 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:29.574Z,1427840249.574 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:29.639Z,1427840249.639 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:29.658Z,1427840249.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:29.766Z,1427840249.766 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:29.766Z,1427840249.766 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:29.803Z,1427840249.803 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:29.817Z,1427840249.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:30.328Z,1427840250.328 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:30.338Z,1427840250.338 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:30.481Z,1427840250.481 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:30.483Z,1427840250.483 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:30.615Z,1427840250.615 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:30.615Z,1427840250.615 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:30.656Z,1427840250.656 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:30.666Z,1427840250.666 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:31.139Z,1427840251.139 [Rowe_600](DEBUG): 2038 bytes available, but need 4084
2015-03-31T22:17:31.192Z,1427840251.192 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:31.220Z,1427840251.220 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:31.697Z,1427840251.697 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:31.697Z,1427840251.697 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:31.986Z,1427840251.986 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:32.010Z,1427840252.010 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:32.473Z,1427840252.473 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:32.474Z,1427840252.474 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:32.525Z,1427840252.525 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:32.549Z,1427840252.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:32.899Z,1427840252.899 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:32.899Z,1427840252.899 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:32.979Z,1427840252.979 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:33.007Z,1427840253.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:33.340Z,1427840253.340 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:33.340Z,1427840253.340 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:33.397Z,1427840253.397 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:33.403Z,1427840253.403 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:33.682Z,1427840253.682 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:33.683Z,1427840253.683 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:33.722Z,1427840253.722 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:33.724Z,1427840253.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:34.183Z,1427840254.183 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:34.183Z,1427840254.183 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:34.239Z,1427840254.239 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:34.252Z,1427840254.252 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:34.465Z,1427840254.465 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:34.466Z,1427840254.466 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:34.502Z,1427840254.502 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:34.512Z,1427840254.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:35.018Z,1427840255.018 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:17:35.072Z,1427840255.072 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:35.090Z,1427840255.090 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:35.486Z,1427840255.486 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:35.486Z,1427840255.486 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:35.686Z,1427840255.686 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:35.710Z,1427840255.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:36.115Z,1427840256.115 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:36.116Z,1427840256.116 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:36.259Z,1427840256.259 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:36.291Z,1427840256.291 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:36.622Z,1427840256.622 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:36.622Z,1427840256.622 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:36.719Z,1427840256.719 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:36.743Z,1427840256.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:37.076Z,1427840257.076 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:37.076Z,1427840257.076 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:37.113Z,1427840257.113 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:37.123Z,1427840257.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:37.401Z,1427840257.401 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:37.401Z,1427840257.401 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:37.444Z,1427840257.444 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:37.446Z,1427840257.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:37.894Z,1427840257.894 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:37.894Z,1427840257.894 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:37.923Z,1427840257.923 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:37.924Z,1427840257.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:38.226Z,1427840258.226 [Rowe_600](DEBUG): 4076 bytes available, but need 4084
2015-03-31T22:17:38.239Z,1427840258.239 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:38.240Z,1427840258.240 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:38.881Z,1427840258.881 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64a4]
2015-03-31T22:17:38.882Z,1427840258.882 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64f4]
2015-03-31T22:17:39.059Z,1427840259.059 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:39.082Z,1427840259.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:39.507Z,1427840259.507 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:39.508Z,1427840259.508 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:39.559Z,1427840259.559 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:39.592Z,1427840259.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:40.070Z,1427840260.070 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:40.113Z,1427840260.113 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:40.114Z,1427840260.114 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:40.283Z,1427840260.283 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:40.285Z,1427840260.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:40.521Z,1427840260.521 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:40.547Z,1427840260.547 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:40.548Z,1427840260.548 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:40.724Z,1427840260.724 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:40.734Z,1427840260.734 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:40.833Z,1427840260.833 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:40.843Z,1427840260.843 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:40.843Z,1427840260.843 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:40.890Z,1427840260.890 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:40.892Z,1427840260.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:41.401Z,1427840261.401 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:41.439Z,1427840261.439 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:41.440Z,1427840261.440 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:41.578Z,1427840261.578 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:41.588Z,1427840261.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:41.696Z,1427840261.696 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:41.698Z,1427840261.698 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:41.698Z,1427840261.698 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:41.735Z,1427840261.735 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:41.737Z,1427840261.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:42.156Z,1427840262.156 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:42.159Z,1427840262.159 [Rowe_600](DEBUG): 859 bytes available, but need 4084
2015-03-31T22:17:42.223Z,1427840262.223 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:42.256Z,1427840262.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:42.750Z,1427840262.750 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:42.780Z,1427840262.780 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:42.781Z,1427840262.781 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:42.892Z,1427840262.892 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:42.910Z,1427840262.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:43.505Z,1427840263.505 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:43.539Z,1427840263.539 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:43.540Z,1427840263.540 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:43.627Z,1427840263.627 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:43.628Z,1427840263.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:44.013Z,1427840264.013 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:44.031Z,1427840264.031 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:44.032Z,1427840264.032 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:44.103Z,1427840264.103 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:44.131Z,1427840264.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:44.457Z,1427840264.457 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:44.467Z,1427840264.467 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:44.468Z,1427840264.468 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:44.497Z,1427840264.497 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:44.507Z,1427840264.507 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:44.775Z,1427840264.775 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:44.778Z,1427840264.778 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:44.778Z,1427840264.778 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:44.819Z,1427840264.819 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:44.829Z,1427840264.829 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:45.308Z,1427840265.308 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:45.310Z,1427840265.310 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:45.311Z,1427840265.311 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:45.384Z,1427840265.384 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:45.385Z,1427840265.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:45.618Z,1427840265.618 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:45.647Z,1427840265.647 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:45.648Z,1427840265.648 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:45.820Z,1427840265.820 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:45.848Z,1427840265.848 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:46.230Z,1427840266.230 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:46.270Z,1427840266.270 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:46.271Z,1427840266.271 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:46.358Z,1427840266.358 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:46.382Z,1427840266.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:46.705Z,1427840266.705 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:46.716Z,1427840266.716 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:46.716Z,1427840266.716 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:46.920Z,1427840266.920 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:46.946Z,1427840266.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:47.276Z,1427840267.276 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:47.302Z,1427840267.302 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:47.312Z,1427840267.312 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:47.466Z,1427840267.466 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:47.468Z,1427840267.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:47.803Z,1427840267.803 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:47.842Z,1427840267.842 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64a4]
2015-03-31T22:17:47.843Z,1427840267.843 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64f4]
2015-03-31T22:17:47.944Z,1427840267.944 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:47.954Z,1427840267.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:48.090Z,1427840268.090 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:48.100Z,1427840268.100 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:48.101Z,1427840268.101 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:48.138Z,1427840268.138 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:48.139Z,1427840268.139 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:48.616Z,1427840268.616 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:48.619Z,1427840268.619 [Rowe_600](DEBUG): 2489 bytes available, but need 4084
2015-03-31T22:17:48.681Z,1427840268.681 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:48.693Z,1427840268.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:49.025Z,1427840269.025 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:49.031Z,1427840269.031 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:49.031Z,1427840269.031 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:49.069Z,1427840269.069 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:49.079Z,1427840269.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:49.253Z,1427840269.253 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:49.260Z,1427840269.260 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:49.284Z,1427840269.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:49.718Z,1427840269.718 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:49.751Z,1427840269.751 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:49.752Z,1427840269.752 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:49.887Z,1427840269.887 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:49.917Z,1427840269.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:50.208Z,1427840270.208 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:50.234Z,1427840270.234 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:50.235Z,1427840270.235 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:50.404Z,1427840270.404 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:50.406Z,1427840270.406 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:50.785Z,1427840270.785 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:50.787Z,1427840270.787 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:50.787Z,1427840270.787 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:50.816Z,1427840270.816 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:50.840Z,1427840270.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:51.211Z,1427840271.211 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:51.213Z,1427840271.213 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:51.221Z,1427840271.221 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:51.270Z,1427840271.270 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:51.295Z,1427840271.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:51.640Z,1427840271.640 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:51.650Z,1427840271.650 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:51.651Z,1427840271.651 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:51.689Z,1427840271.689 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:51.699Z,1427840271.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:51.713Z,1427840271.713 [Startup:StartupSatComms:A](INFO): Timed out from 2015-03-31T22:16:51.7Z
2015-03-31T22:17:51.713Z,1427840271.713 [Startup:StartupSatComms:A] Stopped
2015-03-31T22:17:51.713Z,1427840271.713 [Startup:StartupSatComms:B] Running Loop=1
2015-03-31T22:17:51.945Z,1427840271.945 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:51.956Z,1427840271.956 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:51.956Z,1427840271.956 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:51.993Z,1427840271.993 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:51.999Z,1427840271.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:52.016Z,1427840272.016 [Startup:StartupSatComms:B](DEBUG): Initialize ReadDataComponent to sense platform_communications
2015-03-31T22:17:53.095Z,1427840273.095 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:53.131Z,1427840273.131 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:53.141Z,1427840273.141 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:53.317Z,1427840273.317 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:53.324Z,1427840273.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:53.715Z,1427840273.715 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:53.715Z,1427840273.715 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:53.771Z,1427840273.771 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:53.796Z,1427840273.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:54.277Z,1427840274.277 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:54.287Z,1427840274.287 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:54.483Z,1427840274.483 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:54.509Z,1427840274.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:54.897Z,1427840274.897 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:54.907Z,1427840274.907 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:54.907Z,1427840274.907 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:54.944Z,1427840274.944 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:54.946Z,1427840274.946 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:55.335Z,1427840275.335 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:55.346Z,1427840275.346 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:55.346Z,1427840275.346 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:55.383Z,1427840275.383 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:55.393Z,1427840275.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:55.787Z,1427840275.787 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:55.789Z,1427840275.789 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:55.789Z,1427840275.789 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:55.865Z,1427840275.865 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:55.872Z,1427840275.872 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:56.214Z,1427840276.214 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:56.216Z,1427840276.216 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:56.216Z,1427840276.216 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:56.261Z,1427840276.261 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:56.263Z,1427840276.263 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:56.562Z,1427840276.562 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:56.564Z,1427840276.564 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:56.564Z,1427840276.564 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:56.594Z,1427840276.594 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:56.596Z,1427840276.596 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:57.113Z,1427840277.113 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:57.147Z,1427840277.147 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64a4]
2015-03-31T22:17:57.149Z,1427840277.149 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64f4]
2015-03-31T22:17:57.320Z,1427840277.320 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:57.340Z,1427840277.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:57.671Z,1427840277.671 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:57.692Z,1427840277.692 [Rowe_600](DEBUG): 2575 bytes available, but need 4084
2015-03-31T22:17:57.758Z,1427840277.758 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:57.783Z,1427840277.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:58.164Z,1427840278.164 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:17:58.197Z,1427840278.197 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:58.198Z,1427840278.198 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:58.342Z,1427840278.342 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:58.365Z,1427840278.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:58.704Z,1427840278.704 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:58.704Z,1427840278.704 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:58.871Z,1427840278.871 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:58.896Z,1427840278.896 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:59.121Z,1427840279.121 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:59.130Z,1427840279.130 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:59.167Z,1427840279.167 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:59.168Z,1427840279.168 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:17:59.558Z,1427840279.558 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:17:59.560Z,1427840279.560 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:17:59.739Z,1427840279.739 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:17:59.746Z,1427840279.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:00.063Z,1427840280.063 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:18:00.065Z,1427840280.065 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:00.066Z,1427840280.066 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:00.102Z,1427840280.102 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:00.104Z,1427840280.104 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:00.343Z,1427840280.343 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:18:00.360Z,1427840280.360 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:00.362Z,1427840280.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:00.843Z,1427840280.843 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:18:00.868Z,1427840280.868 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:00.878Z,1427840280.878 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:01.054Z,1427840281.054 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:01.078Z,1427840281.078 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:01.430Z,1427840281.430 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:01.431Z,1427840281.431 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:01.535Z,1427840281.535 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:01.537Z,1427840281.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:01.931Z,1427840281.931 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:01.931Z,1427840281.931 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:02.041Z,1427840282.041 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:02.075Z,1427840282.075 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:02.375Z,1427840282.375 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:02.375Z,1427840282.375 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:02.499Z,1427840282.499 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:02.524Z,1427840282.524 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:02.798Z,1427840282.798 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:18:02.808Z,1427840282.808 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:02.808Z,1427840282.808 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:02.845Z,1427840282.845 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:02.847Z,1427840282.847 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:03.199Z,1427840283.199 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:18:03.205Z,1427840283.205 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:03.206Z,1427840283.206 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:03.230Z,1427840283.230 [BPC1](ERROR): Failed to receive battery data
2015-03-31T22:18:03.230Z,1427840283.230 [BPC1] Communications Fault, FailCount= 1
2015-03-31T22:18:03.230Z,1427840283.230 [BPC1](ERROR): Communications Fault
2015-03-31T22:18:03.304Z,1427840283.304 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:03.336Z,1427840283.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:03.506Z,1427840283.506 [CBIT](ERROR): Communications Fault in component: BPC1
2015-03-31T22:18:03.661Z,1427840283.661 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:18:03.661Z,1427840283.661 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:18:03.675Z,1427840283.675 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:03.686Z,1427840283.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:04.304Z,1427840284.304 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:18:04.328Z,1427840284.328 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:04.338Z,1427840284.338 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:04.475Z,1427840284.475 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:04.476Z,1427840284.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:04.865Z,1427840284.865 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:18:04.876Z,1427840284.876 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:04.876Z,1427840284.876 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:05.043Z,1427840285.043 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:05.067Z,1427840285.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:05.235Z,1427840285.235 [CBIT](INFO): Clearing failed state for component BPC1
2015-03-31T22:18:05.243Z,1427840285.243 [BPC1] No Fault, FailCount= 1
2015-03-31T22:18:05.470Z,1427840285.470 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:18:05.504Z,1427840285.504 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:05.505Z,1427840285.505 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:05.888Z,1427840285.888 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:05.913Z,1427840285.913 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:06.160Z,1427840286.160 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:18:06.194Z,1427840286.194 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:06.195Z,1427840286.195 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:06.423Z,1427840286.423 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:06.446Z,1427840286.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:06.567Z,1427840286.567 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:18:06.578Z,1427840286.578 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:06.578Z,1427840286.578 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:06.607Z,1427840286.607 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:06.617Z,1427840286.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:07.280Z,1427840287.280 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:07.282Z,1427840287.282 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:07.342Z,1427840287.342 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:07.352Z,1427840287.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:07.479Z,1427840287.479 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:07.479Z,1427840287.479 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:07.516Z,1427840287.516 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:07.518Z,1427840287.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:07.967Z,1427840287.967 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:07.972Z,1427840287.972 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:08.105Z,1427840288.105 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:08.112Z,1427840288.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:08.385Z,1427840288.385 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:18:08.406Z,1427840288.406 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:08.407Z,1427840288.407 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:08.516Z,1427840288.516 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:08.533Z,1427840288.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:08.840Z,1427840288.840 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:18:08.862Z,1427840288.862 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:08.863Z,1427840288.863 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:08.957Z,1427840288.957 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:08.966Z,1427840288.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:09.362Z,1427840289.362 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:09.362Z,1427840289.362 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:09.495Z,1427840289.495 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:09.518Z,1427840289.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:09.811Z,1427840289.811 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:09.812Z,1427840289.812 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:10.010Z,1427840290.010 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:10.034Z,1427840290.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:10.296Z,1427840290.296 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:10.297Z,1427840290.297 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:10.333Z,1427840290.333 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:10.343Z,1427840290.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:10.630Z,1427840290.630 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:10.631Z,1427840290.631 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:10.709Z,1427840290.709 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:10.732Z,1427840290.732 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:11.067Z,1427840291.067 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:18:11.080Z,1427840291.080 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:11.082Z,1427840291.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:11.462Z,1427840291.462 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:11.462Z,1427840291.462 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:11.499Z,1427840291.499 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:11.509Z,1427840291.509 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:11.903Z,1427840291.903 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:18:11.951Z,1427840291.951 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:11.982Z,1427840291.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:12.333Z,1427840292.333 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:12.342Z,1427840292.342 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:12.579Z,1427840292.579 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:12.603Z,1427840292.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:12.983Z,1427840292.983 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:12.984Z,1427840292.984 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:13.104Z,1427840293.104 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:13.124Z,1427840293.124 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:13.477Z,1427840293.477 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64a4]
2015-03-31T22:18:13.478Z,1427840293.478 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64f4]
2015-03-31T22:18:13.549Z,1427840293.549 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:13.574Z,1427840293.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:13.913Z,1427840293.913 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:13.914Z,1427840293.914 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:13.950Z,1427840293.950 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:13.952Z,1427840293.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:14.247Z,1427840294.247 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:14.247Z,1427840294.247 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:14.282Z,1427840294.282 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:14.283Z,1427840294.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:14.747Z,1427840294.747 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:18:14.760Z,1427840294.760 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:14.771Z,1427840294.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:15.044Z,1427840295.044 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:15.044Z,1427840295.044 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:15.082Z,1427840295.082 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:15.091Z,1427840295.091 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:15.597Z,1427840295.597 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:18:15.614Z,1427840295.614 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:15.626Z,1427840295.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:15.995Z,1427840295.995 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:15.995Z,1427840295.995 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:16.131Z,1427840296.131 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:16.151Z,1427840296.151 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:16.568Z,1427840296.568 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:16.581Z,1427840296.581 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:16.738Z,1427840296.738 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:16.754Z,1427840296.754 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:17.143Z,1427840297.143 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:17.143Z,1427840297.143 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:17.166Z,1427840297.166 [BPC1](ERROR): A bank expecting battery number:1 and read number: uart read:
2015-03-31T22:18:17.166Z,1427840297.166 [BPC1](ERROR): Failed to parse bank A battery data
2015-03-31T22:18:17.167Z,1427840297.167 [BPC1] Data Fault, FailCount= 2
2015-03-31T22:18:17.167Z,1427840297.167 [BPC1](ERROR): Data Fault
2015-03-31T22:18:17.181Z,1427840297.181 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:17.191Z,1427840297.191 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:17.258Z,1427840297.258 [CBIT](ERROR): Data Fault in component: BPC1
2015-03-31T22:18:17.590Z,1427840297.590 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:17.591Z,1427840297.591 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:17.643Z,1427840297.643 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:17.645Z,1427840297.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:17.774Z,1427840297.774 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:17.774Z,1427840297.774 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:17.798Z,1427840297.798 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:17.808Z,1427840297.808 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:18.330Z,1427840298.330 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:18.344Z,1427840298.344 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:18.485Z,1427840298.485 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:18.486Z,1427840298.486 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:18.526Z,1427840298.526 [CBIT](INFO): Clearing failed state for component BPC1
2015-03-31T22:18:18.526Z,1427840298.526 [BPC1] No Fault, FailCount= 2
2015-03-31T22:18:18.598Z,1427840298.598 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:18.599Z,1427840298.599 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:18.728Z,1427840298.728 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:18.738Z,1427840298.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:19.158Z,1427840299.158 [Rowe_600](DEBUG): 2483 bytes available, but need 4084
2015-03-31T22:18:19.254Z,1427840299.254 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:19.277Z,1427840299.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:19.610Z,1427840299.610 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:19.611Z,1427840299.611 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:19.709Z,1427840299.709 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:19.733Z,1427840299.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:20.119Z,1427840300.119 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:20.120Z,1427840300.120 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:20.320Z,1427840300.320 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:20.345Z,1427840300.345 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:20.776Z,1427840300.776 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:20.777Z,1427840300.777 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:20.877Z,1427840300.877 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:20.878Z,1427840300.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:21.221Z,1427840301.221 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:21.222Z,1427840301.222 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:21.317Z,1427840301.317 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:21.319Z,1427840301.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:21.502Z,1427840301.502 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:21.502Z,1427840301.502 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:21.538Z,1427840301.538 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:21.540Z,1427840301.540 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:21.940Z,1427840301.940 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:21.940Z,1427840301.940 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:21.977Z,1427840301.977 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:21.987Z,1427840301.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:22.247Z,1427840302.247 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:22.248Z,1427840302.248 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:22.285Z,1427840302.285 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:22.295Z,1427840302.295 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:22.788Z,1427840302.788 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:22.788Z,1427840302.788 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:22.904Z,1427840302.904 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:22.924Z,1427840302.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:23.312Z,1427840303.312 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:23.313Z,1427840303.313 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:23.504Z,1427840303.504 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:23.518Z,1427840303.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:23.868Z,1427840303.868 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:23.877Z,1427840303.877 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:23.957Z,1427840303.957 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:23.959Z,1427840303.959 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:24.349Z,1427840304.349 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:24.350Z,1427840304.350 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:24.511Z,1427840304.511 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:24.536Z,1427840304.536 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:24.830Z,1427840304.830 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:24.831Z,1427840304.831 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:24.868Z,1427840304.868 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:24.878Z,1427840304.878 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:25.210Z,1427840305.210 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:25.210Z,1427840305.210 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:25.254Z,1427840305.254 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:25.256Z,1427840305.256 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:25.642Z,1427840305.642 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:18:25.656Z,1427840305.656 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:25.667Z,1427840305.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:26.009Z,1427840306.009 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:26.009Z,1427840306.009 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:26.038Z,1427840306.038 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:26.048Z,1427840306.048 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:26.594Z,1427840306.594 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:26.595Z,1427840306.595 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:26.738Z,1427840306.738 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:26.762Z,1427840306.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:27.151Z,1427840307.151 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:27.154Z,1427840307.154 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:27.278Z,1427840307.278 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:27.280Z,1427840307.280 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:27.656Z,1427840307.656 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:27.657Z,1427840307.657 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:27.790Z,1427840307.790 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:27.801Z,1427840307.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:28.100Z,1427840308.100 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:28.101Z,1427840308.101 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:28.290Z,1427840308.290 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:28.315Z,1427840308.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:28.556Z,1427840308.556 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:28.556Z,1427840308.556 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:28.593Z,1427840308.593 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:28.594Z,1427840308.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:28.948Z,1427840308.948 [Rowe_600](DEBUG): 4076 bytes available, but need 4084
2015-03-31T22:18:28.968Z,1427840308.968 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:28.970Z,1427840308.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:29.372Z,1427840309.372 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64a4]
2015-03-31T22:18:29.372Z,1427840309.372 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64f4]
2015-03-31T22:18:29.421Z,1427840309.421 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:29.423Z,1427840309.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:29.775Z,1427840309.774 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:29.776Z,1427840309.776 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:30.304Z,1427840310.304 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:30.305Z,1427840310.305 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:30.484Z,1427840310.484 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:30.535Z,1427840310.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:30.939Z,1427840310.939 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:30.940Z,1427840310.940 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:30.991Z,1427840310.991 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:31.031Z,1427840311.031 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:31.492Z,1427840311.492 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:31.501Z,1427840311.501 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:31.772Z,1427840311.772 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:31.790Z,1427840311.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:32.116Z,1427840312.116 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:32.125Z,1427840312.125 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:32.199Z,1427840312.199 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:32.205Z,1427840312.205 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:32.320Z,1427840312.320 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:32.320Z,1427840312.320 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:32.357Z,1427840312.357 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:32.371Z,1427840312.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:32.900Z,1427840312.900 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:32.901Z,1427840312.901 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:33.072Z,1427840313.072 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:33.074Z,1427840313.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:33.217Z,1427840313.217 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:33.217Z,1427840313.217 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:33.275Z,1427840313.275 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:33.277Z,1427840313.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:33.608Z,1427840313.608 [Rowe_600](DEBUG): 652 bytes available, but need 4084
2015-03-31T22:18:33.689Z,1427840313.689 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:33.714Z,1427840313.714 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:34.139Z,1427840314.139 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:34.149Z,1427840314.149 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:34.296Z,1427840314.296 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:34.306Z,1427840314.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:34.687Z,1427840314.687 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:34.687Z,1427840314.687 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:34.795Z,1427840314.795 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:34.827Z,1427840314.827 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:35.298Z,1427840315.298 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:35.299Z,1427840315.299 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:35.466Z,1427840315.466 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:35.467Z,1427840315.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:35.821Z,1427840315.821 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:35.831Z,1427840315.831 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:35.915Z,1427840315.915 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:35.917Z,1427840315.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:36.071Z,1427840316.071 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:36.072Z,1427840316.072 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:36.125Z,1427840316.125 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:36.127Z,1427840316.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:36.556Z,1427840316.556 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:36.557Z,1427840316.557 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:36.749Z,1427840316.749 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:36.751Z,1427840316.751 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:36.907Z,1427840316.907 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:36.908Z,1427840316.908 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:36.940Z,1427840316.940 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:36.942Z,1427840316.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:37.303Z,1427840317.303 [Rowe_600](DEBUG): 573 bytes available, but need 4084
2015-03-31T22:18:37.362Z,1427840317.362 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:37.369Z,1427840317.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:37.743Z,1427840317.743 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:37.744Z,1427840317.744 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:37.939Z,1427840317.939 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:37.964Z,1427840317.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:38.380Z,1427840318.380 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:38.381Z,1427840318.381 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:38.435Z,1427840318.435 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:38.464Z,1427840318.464 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:38.827Z,1427840318.827 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64a4]
2015-03-31T22:18:38.828Z,1427840318.828 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64f4]
2015-03-31T22:18:39.023Z,1427840319.023 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:39.057Z,1427840319.057 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:39.335Z,1427840319.335 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:39.345Z,1427840319.345 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:39.516Z,1427840319.516 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:39.527Z,1427840319.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:39.741Z,1427840319.741 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:39.742Z,1427840319.742 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:39.778Z,1427840319.778 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:39.780Z,1427840319.780 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:40.223Z,1427840320.223 [Rowe_600](DEBUG): 1274 bytes available, but need 4084
2015-03-31T22:18:40.282Z,1427840320.282 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:40.307Z,1427840320.307 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:40.552Z,1427840320.552 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:40.553Z,1427840320.553 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:40.590Z,1427840320.590 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:40.591Z,1427840320.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:41.284Z,1427840321.284 [Rowe_600](DEBUG): 3651 bytes available, but need 4084
2015-03-31T22:18:41.326Z,1427840321.326 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:41.336Z,1427840321.336 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:41.336Z,1427840321.336 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 1
2015-03-31T22:18:41.336Z,1427840321.336 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2015-03-31T22:18:41.338Z,1427840321.338 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:41.338Z,1427840321.338 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 1
2015-03-31T22:18:41.338Z,1427840321.338 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2015-03-31T22:18:41.363Z,1427840321.363 [DeadReckonWithRespectToWater](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:41.372Z,1427840321.372 [DeadReckonWithRespectToWater] Software Fault, FailCount= 1
2015-03-31T22:18:41.372Z,1427840321.372 [DeadReckonWithRespectToWater](ERROR): Software Fault
2015-03-31T22:18:41.394Z,1427840321.394 [DeadReckonWithRespectToSeafloor](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:41.395Z,1427840321.395 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2015-03-31T22:18:41.408Z,1427840321.408 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2015-03-31T22:18:41.425Z,1427840321.425 [DeadReckonUsingDVLWaterTrack](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:41.426Z,1427840321.426 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2015-03-31T22:18:41.426Z,1427840321.426 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2015-03-31T22:18:41.583Z,1427840321.583 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2015-03-31T22:18:41.593Z,1427840321.593 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2015-03-31T22:18:41.594Z,1427840321.594 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2015-03-31T22:18:41.604Z,1427840321.604 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2015-03-31T22:18:41.605Z,1427840321.605 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2015-03-31T22:18:41.830Z,1427840321.830 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:41.831Z,1427840321.831 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:42.029Z,1427840322.029 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:42.120Z,1427840322.120 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2015-03-31T22:18:42.120Z,1427840322.120 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 1
2015-03-31T22:18:42.120Z,1427840322.120 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2015-03-31T22:18:42.121Z,1427840322.121 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 1
2015-03-31T22:18:42.121Z,1427840322.121 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2015-03-31T22:18:42.121Z,1427840322.121 [DeadReckonWithRespectToWater] No Fault, FailCount= 1
2015-03-31T22:18:42.122Z,1427840322.122 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2015-03-31T22:18:42.122Z,1427840322.122 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2015-03-31T22:18:42.123Z,1427840322.123 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2015-03-31T22:18:42.123Z,1427840322.123 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2015-03-31T22:18:42.372Z,1427840322.372 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:42.382Z,1427840322.382 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:42.503Z,1427840322.503 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:42.504Z,1427840322.504 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2015-03-31T22:18:42.504Z,1427840322.504 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2015-03-31T22:18:42.513Z,1427840322.513 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2015-03-31T22:18:42.513Z,1427840322.513 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2015-03-31T22:18:42.514Z,1427840322.514 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2015-03-31T22:18:42.888Z,1427840322.888 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:42.889Z,1427840322.889 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:42.925Z,1427840322.925 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:42.927Z,1427840322.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:18:42.928Z,1427840322.928 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:43.323Z,1427840323.323 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:43.323Z,1427840323.323 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:43.360Z,1427840323.360 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:43.361Z,1427840323.361 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:18:43.370Z,1427840323.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:43.537Z,1427840323.537 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:43.537Z,1427840323.537 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:43.574Z,1427840323.574 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:43.583Z,1427840323.583 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:18:43.584Z,1427840323.584 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:44.133Z,1427840324.133 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:44.134Z,1427840324.134 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:44.187Z,1427840324.187 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:44.201Z,1427840324.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:18:44.202Z,1427840324.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:44.294Z,1427840324.294 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:44.294Z,1427840324.294 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:44.323Z,1427840324.323 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:44.332Z,1427840324.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:18:44.334Z,1427840324.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:44.884Z,1427840324.884 [Rowe_600](DEBUG): 2433 bytes available, but need 4084
2015-03-31T22:18:44.948Z,1427840324.948 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:44.960Z,1427840324.960 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:18:44.982Z,1427840324.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:45.403Z,1427840325.403 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:45.405Z,1427840325.405 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:45.453Z,1427840325.453 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:45.488Z,1427840325.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:45.866Z,1427840325.866 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:45.875Z,1427840325.875 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:46.052Z,1427840326.052 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:46.077Z,1427840326.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:46.504Z,1427840326.504 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:46.504Z,1427840326.504 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:46.679Z,1427840326.679 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:46.693Z,1427840326.693 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:47.042Z,1427840327.042 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:47.042Z,1427840327.042 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:47.071Z,1427840327.071 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:47.081Z,1427840327.081 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:47.330Z,1427840327.330 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:47.330Z,1427840327.330 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:47.359Z,1427840327.359 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:47.369Z,1427840327.369 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:47.894Z,1427840327.894 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:47.894Z,1427840327.894 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:47.953Z,1427840327.953 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:47.963Z,1427840327.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:48.274Z,1427840328.274 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:48.275Z,1427840328.275 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:48.311Z,1427840328.311 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:48.313Z,1427840328.313 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:48.680Z,1427840328.680 [Rowe_600](DEBUG): 3326 bytes available, but need 4084
2015-03-31T22:18:48.745Z,1427840328.745 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:48.755Z,1427840328.755 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:49.156Z,1427840329.156 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:49.158Z,1427840329.158 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:49.340Z,1427840329.340 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:49.364Z,1427840329.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:49.787Z,1427840329.787 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:49.817Z,1427840329.817 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:49.925Z,1427840329.925 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:49.927Z,1427840329.927 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:50.337Z,1427840330.337 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:50.338Z,1427840330.338 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:50.366Z,1427840330.366 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:50.368Z,1427840330.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:50.746Z,1427840330.746 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:50.758Z,1427840330.758 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:50.795Z,1427840330.795 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:50.797Z,1427840330.797 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:51.021Z,1427840331.021 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64a4]
2015-03-31T22:18:51.021Z,1427840331.021 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64f4]
2015-03-31T22:18:51.058Z,1427840331.058 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:51.060Z,1427840331.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:51.618Z,1427840331.618 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:18:51.659Z,1427840331.659 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:51.661Z,1427840331.661 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:51.798Z,1427840331.798 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:51.799Z,1427840331.799 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:51.836Z,1427840331.836 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:51.837Z,1427840331.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:51.843Z,1427840331.843 [Startup:StartupSatComms:B](INFO): Timed out from 2015-03-31T22:17:51.7Z
2015-03-31T22:18:51.843Z,1427840331.843 [Startup:StartupSatComms:B] Stopped
2015-03-31T22:18:51.843Z,1427840331.843 [Startup:StartupSatComms](INFO): Completed Startup:StartupSatComms
2015-03-31T22:18:51.843Z,1427840331.843 [Startup:StartupSatComms] Stopped
2015-03-31T22:18:51.843Z,1427840331.843 [Startup:StartupSatComms](INFO): Aggregate::uninitialize Startup:StartupSatComms
2015-03-31T22:18:51.852Z,1427840331.852 [Startup](INFO): Completed Startup
2015-03-31T22:18:51.852Z,1427840331.852 [Startup] Stopped
2015-03-31T22:18:51.852Z,1427840331.852 [Startup](INFO): Aggregate::uninitialize Startup
2015-03-31T22:18:51.852Z,1427840331.852 [Startup:A.GoToSurface] Stopped
2015-03-31T22:18:51.853Z,1427840331.853 [Startup:A.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2015-03-31T22:18:52.397Z,1427840332.397 [Rowe_600](DEBUG): 3410 bytes available, but need 4084
2015-03-31T22:18:52.447Z,1427840332.447 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:52.457Z,1427840332.457 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:52.470Z,1427840332.470 [MissionManager](IMPORTANT): Started mission Default
2015-03-31T22:18:52.471Z,1427840332.471 [Default] Running Loop=1
2015-03-31T22:18:52.471Z,1427840332.471 [Default](INFO): Aggregate::initialize Default
2015-03-31T22:18:52.471Z,1427840332.471 [Default:B.GoToSurface] Running Loop=1
2015-03-31T22:18:52.471Z,1427840332.471 [Default:B.GoToSurface](DEBUG): Initialize GoToSurfaceComponent.
2015-03-31T22:18:52.472Z,1427840332.472 [Default:B.GoToSurface](DEBUG): No depth rate setting specified. Using default value of nan m/s.
2015-03-31T22:18:52.472Z,1427840332.472 [Default:B.GoToSurface](DEBUG): No pitch setting specified. Using default value of nan degrees.
2015-03-31T22:18:52.472Z,1427840332.472 [Default:B.GoToSurface](DEBUG): No speed setting specified. Using default value of 0.500000 m/s.
2015-03-31T22:18:52.482Z,1427840332.482 [Default:StartClock] Running Loop=1
2015-03-31T22:18:52.482Z,1427840332.482 [Default:StartClock](INFO): Aggregate::initialize Default:StartClock
2015-03-31T22:18:52.483Z,1427840332.483 [Default:StartClock:A] Running Loop=1
2015-03-31T22:18:52.497Z,1427840332.497 [Default:CheckIn] Running Loop=1
2015-03-31T22:18:52.498Z,1427840332.498 [Default:CheckIn](INFO): Aggregate::initialize Default:CheckIn
2015-03-31T22:18:52.499Z,1427840332.499 [Default:CheckIn:A.SetSpeed] Running Loop=1
2015-03-31T22:18:52.499Z,1427840332.499 [Default:CheckIn:A.SetSpeed](DEBUG): Initialize.
2015-03-31T22:18:52.500Z,1427840332.500 [Default:CheckIn:Read_GPS] Running Loop=1
2015-03-31T22:18:52.512Z,1427840332.512 [Default:CheckIn:Read_GPS](DEBUG): Initialize ReadDataComponent to sense latitude_fix
2015-03-31T22:18:52.530Z,1427840332.530 [Default:CheckIn:A.SetSpeed] Running Loop=1
2015-03-31T22:18:52.741Z,1427840332.741 [Default:StartClock:A] Stopped
2015-03-31T22:18:52.754Z,1427840332.754 [Default:StartClock](INFO): Completed Default:StartClock
2015-03-31T22:18:52.755Z,1427840332.755 [Default:StartClock] Stopped
2015-03-31T22:18:52.755Z,1427840332.755 [Default:StartClock](INFO): Aggregate::uninitialize Default:StartClock
2015-03-31T22:18:53.131Z,1427840333.131 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:53.132Z,1427840333.132 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:53.241Z,1427840333.241 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:53.251Z,1427840333.251 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:53.301Z,1427840333.301 [Default:WaitAtTheSurface] Running Loop=1
2015-03-31T22:18:53.301Z,1427840333.301 [Default:WaitAtTheSurface](INFO): Aggregate::initialize Default:WaitAtTheSurface
2015-03-31T22:18:53.302Z,1427840333.302 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Running Loop=1
2015-03-31T22:18:53.302Z,1427840333.302 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Initialize.
2015-03-31T22:18:53.633Z,1427840333.633 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:53.633Z,1427840333.633 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:53.748Z,1427840333.748 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:53.773Z,1427840333.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:53.825Z,1427840333.825 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Running Loop=1
2015-03-31T22:18:54.198Z,1427840334.198 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:54.208Z,1427840334.208 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:54.404Z,1427840334.404 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:54.428Z,1427840334.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:54.586Z,1427840334.586 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:54.587Z,1427840334.587 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:54.623Z,1427840334.623 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:54.625Z,1427840334.625 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:54.959Z,1427840334.959 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:54.969Z,1427840334.969 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:55.161Z,1427840335.161 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:55.186Z,1427840335.186 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:55.381Z,1427840335.381 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:55.381Z,1427840335.381 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:55.410Z,1427840335.410 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:55.412Z,1427840335.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:55.919Z,1427840335.919 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:55.919Z,1427840335.919 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:56.016Z,1427840336.016 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:56.042Z,1427840336.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:56.507Z,1427840336.507 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d63f4]
2015-03-31T22:18:56.508Z,1427840336.508 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d6444]
2015-03-31T22:18:56.676Z,1427840336.676 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:56.682Z,1427840336.682 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:57.032Z,1427840337.032 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:57.033Z,1427840337.033 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:57.137Z,1427840337.137 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:57.162Z,1427840337.162 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:57.531Z,1427840337.531 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:57.531Z,1427840337.531 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:57.702Z,1427840337.702 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:57.725Z,1427840337.725 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:57.966Z,1427840337.966 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:57.966Z,1427840337.966 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:58.003Z,1427840338.003 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:58.005Z,1427840338.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:58.387Z,1427840338.387 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:58.388Z,1427840338.388 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:58.520Z,1427840338.520 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:58.558Z,1427840338.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:58.827Z,1427840338.827 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:18:58.840Z,1427840338.840 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:58.842Z,1427840338.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:59.221Z,1427840339.221 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:59.221Z,1427840339.221 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:59.268Z,1427840339.268 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:18:59.293Z,1427840339.293 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:18:59.796Z,1427840339.796 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:18:59.797Z,1427840339.797 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:18:59.976Z,1427840339.976 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:00.004Z,1427840340.004 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:00.413Z,1427840340.413 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:00.413Z,1427840340.413 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:00.548Z,1427840340.548 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:00.586Z,1427840340.586 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:00.961Z,1427840340.961 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:00.971Z,1427840340.971 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:01.169Z,1427840341.169 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:01.184Z,1427840341.184 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:01.559Z,1427840341.559 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:01.561Z,1427840341.561 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:01.690Z,1427840341.690 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:01.700Z,1427840341.700 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:01.833Z,1427840341.833 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:01.833Z,1427840341.833 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:01.874Z,1427840341.874 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:01.880Z,1427840341.880 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:02.362Z,1427840342.362 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:02.363Z,1427840342.363 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:02.500Z,1427840342.500 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:02.511Z,1427840342.511 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:02.646Z,1427840342.646 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:02.647Z,1427840342.647 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:02.687Z,1427840342.687 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:02.697Z,1427840342.697 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:03.259Z,1427840343.259 [Rowe_600](DEBUG): 3307 bytes available, but need 4084
2015-03-31T22:19:03.326Z,1427840343.326 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:03.328Z,1427840343.328 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:03.720Z,1427840343.720 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:03.720Z,1427840343.720 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:03.844Z,1427840343.844 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:03.873Z,1427840343.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:04.281Z,1427840344.281 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:04.282Z,1427840344.282 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:04.476Z,1427840344.476 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:04.500Z,1427840344.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:04.884Z,1427840344.884 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:04.885Z,1427840344.885 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:04.922Z,1427840344.922 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:04.923Z,1427840344.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:05.317Z,1427840345.317 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:05.317Z,1427840345.317 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:05.365Z,1427840345.365 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:05.367Z,1427840345.367 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:05.495Z,1427840345.495 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:05.495Z,1427840345.495 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:05.532Z,1427840345.532 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:05.534Z,1427840345.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:06.045Z,1427840346.045 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:06.055Z,1427840346.055 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:06.192Z,1427840346.192 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:06.193Z,1427840346.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:06.324Z,1427840346.324 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:06.324Z,1427840346.324 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:06.345Z,1427840346.345 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:06.356Z,1427840346.356 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:06.726Z,1427840346.726 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:06.733Z,1427840346.733 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:07.259Z,1427840347.259 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:07.268Z,1427840347.268 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:07.430Z,1427840347.430 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:07.438Z,1427840347.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:07.819Z,1427840347.819 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:07.819Z,1427840347.819 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:07.937Z,1427840347.937 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:07.961Z,1427840347.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:08.442Z,1427840348.442 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:08.444Z,1427840348.444 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:08.603Z,1427840348.603 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:08.605Z,1427840348.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:08.920Z,1427840348.920 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:08.938Z,1427840348.938 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:09.050Z,1427840349.050 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:09.052Z,1427840349.052 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:09.252Z,1427840349.252 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:09.252Z,1427840349.252 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:09.294Z,1427840349.294 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:09.303Z,1427840349.303 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:09.611Z,1427840349.611 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:09.620Z,1427840349.620 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:09.794Z,1427840349.794 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:09.819Z,1427840349.819 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:09.970Z,1427840349.970 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:09.970Z,1427840349.970 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:10.019Z,1427840350.019 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:10.029Z,1427840350.029 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:10.445Z,1427840350.445 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:10.471Z,1427840350.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:10.954Z,1427840350.954 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64a4]
2015-03-31T22:19:10.956Z,1427840350.956 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64f4]
2015-03-31T22:19:11.134Z,1427840351.134 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:11.136Z,1427840351.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:11.532Z,1427840351.532 [Rowe_600](DEBUG): 1696 bytes available, but need 4084
2015-03-31T22:19:11.537Z,1427840351.537 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:11.551Z,1427840351.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:11.943Z,1427840351.943 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:11.943Z,1427840351.943 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:12.121Z,1427840352.121 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:12.145Z,1427840352.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:12.378Z,1427840352.378 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:12.378Z,1427840352.378 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:12.522Z,1427840352.522 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:12.534Z,1427840352.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:12.806Z,1427840352.806 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:12.807Z,1427840352.807 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:12.833Z,1427840352.833 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:12.835Z,1427840352.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:13.235Z,1427840353.235 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:13.235Z,1427840353.235 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:13.415Z,1427840353.415 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:13.440Z,1427840353.440 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:13.857Z,1427840353.857 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:19:13.874Z,1427840353.874 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:13.876Z,1427840353.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:14.344Z,1427840354.344 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:14.345Z,1427840354.345 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:14.479Z,1427840354.479 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:14.482Z,1427840354.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:14.908Z,1427840354.908 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:14.909Z,1427840354.909 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:15.057Z,1427840355.057 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:15.080Z,1427840355.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:15.486Z,1427840355.486 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:15.487Z,1427840355.487 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:15.772Z,1427840355.772 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:15.796Z,1427840355.796 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:16.153Z,1427840356.153 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:16.170Z,1427840356.170 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:16.330Z,1427840356.330 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:16.344Z,1427840356.344 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:16.533Z,1427840356.533 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:16.533Z,1427840356.533 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:16.590Z,1427840356.590 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:16.600Z,1427840356.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:16.944Z,1427840356.944 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:16.945Z,1427840356.945 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:17.100Z,1427840357.100 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:17.125Z,1427840357.125 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:17.377Z,1427840357.377 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:17.377Z,1427840357.377 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:17.435Z,1427840357.435 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:17.437Z,1427840357.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:17.802Z,1427840357.802 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:17.803Z,1427840357.803 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:18.019Z,1427840358.019 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:18.045Z,1427840358.045 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:18.509Z,1427840358.509 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:18.510Z,1427840358.510 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:18.637Z,1427840358.637 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:18.659Z,1427840358.659 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:19.130Z,1427840359.130 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:19.132Z,1427840359.132 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:19.317Z,1427840359.317 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:19.339Z,1427840359.339 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:19.725Z,1427840359.725 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:19.725Z,1427840359.725 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:19.763Z,1427840359.763 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:19.765Z,1427840359.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:20.156Z,1427840360.156 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:20.156Z,1427840360.156 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:20.193Z,1427840360.193 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:20.195Z,1427840360.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:20.338Z,1427840360.338 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:20.338Z,1427840360.338 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:20.375Z,1427840360.375 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:20.385Z,1427840360.385 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:20.887Z,1427840360.887 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:20.888Z,1427840360.888 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:21.044Z,1427840361.044 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:21.046Z,1427840361.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:21.338Z,1427840361.338 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:21.339Z,1427840361.339 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:21.385Z,1427840361.385 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:21.387Z,1427840361.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:21.587Z,1427840361.587 [Rowe_600](DEBUG): 648 bytes available, but need 4084
2015-03-31T22:19:21.647Z,1427840361.647 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:21.672Z,1427840361.672 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:22.153Z,1427840362.153 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:22.171Z,1427840362.171 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:22.288Z,1427840362.288 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:22.290Z,1427840362.290 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:22.666Z,1427840362.666 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:22.666Z,1427840362.666 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:22.787Z,1427840362.787 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:22.811Z,1427840362.811 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:23.218Z,1427840363.218 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:23.219Z,1427840363.219 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:23.390Z,1427840363.390 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:23.413Z,1427840363.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:23.737Z,1427840363.737 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:23.739Z,1427840363.739 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:23.886Z,1427840363.886 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:23.888Z,1427840363.888 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:24.028Z,1427840364.028 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:24.028Z,1427840364.028 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:24.065Z,1427840364.065 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:24.076Z,1427840364.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:24.433Z,1427840364.433 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:24.435Z,1427840364.435 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:24.603Z,1427840364.603 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:24.624Z,1427840364.624 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:24.812Z,1427840364.812 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:24.812Z,1427840364.812 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:24.849Z,1427840364.849 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:24.860Z,1427840364.860 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:25.212Z,1427840365.212 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:25.214Z,1427840365.214 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:25.721Z,1427840365.721 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:25.722Z,1427840365.722 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:25.887Z,1427840365.887 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:25.906Z,1427840365.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:26.263Z,1427840366.263 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:26.264Z,1427840366.264 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:26.438Z,1427840366.438 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:26.463Z,1427840366.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:26.880Z,1427840366.880 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:26.882Z,1427840366.882 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:27.080Z,1427840367.080 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:27.099Z,1427840367.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:27.382Z,1427840367.382 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64a4]
2015-03-31T22:19:27.395Z,1427840367.395 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64f4]
2015-03-31T22:19:27.583Z,1427840367.583 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:27.585Z,1427840367.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:27.710Z,1427840367.710 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:27.710Z,1427840367.710 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:27.747Z,1427840367.747 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:27.761Z,1427840367.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:28.382Z,1427840368.382 [Rowe_600](DEBUG): 3467 bytes available, but need 4084
2015-03-31T22:19:28.439Z,1427840368.439 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:28.445Z,1427840368.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:28.571Z,1427840368.571 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:28.571Z,1427840368.571 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:28.608Z,1427840368.608 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:28.618Z,1427840368.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:29.146Z,1427840369.146 [Rowe_600](DEBUG): 2354 bytes available, but need 4084
2015-03-31T22:19:29.203Z,1427840369.203 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:29.226Z,1427840369.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:29.545Z,1427840369.545 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:29.554Z,1427840369.554 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:29.695Z,1427840369.695 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:29.696Z,1427840369.696 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:30.098Z,1427840370.098 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:30.098Z,1427840370.098 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:30.485Z,1427840370.485 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:30.487Z,1427840370.487 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:30.887Z,1427840370.887 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:30.888Z,1427840370.888 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:30.934Z,1427840370.934 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:30.951Z,1427840370.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:31.329Z,1427840371.329 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:31.337Z,1427840371.337 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:31.374Z,1427840371.374 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:31.376Z,1427840371.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:31.867Z,1427840371.867 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:31.868Z,1427840371.868 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:31.961Z,1427840371.961 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:31.963Z,1427840371.963 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:32.093Z,1427840372.093 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:32.094Z,1427840372.094 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:32.131Z,1427840372.131 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:32.132Z,1427840372.132 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:32.674Z,1427840372.674 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:32.684Z,1427840372.684 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:32.836Z,1427840372.836 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:32.861Z,1427840372.861 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:33.215Z,1427840373.215 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:33.215Z,1427840373.215 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:33.429Z,1427840373.429 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:33.453Z,1427840373.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:33.850Z,1427840373.850 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:33.851Z,1427840373.851 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:33.950Z,1427840373.950 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:33.952Z,1427840373.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:34.354Z,1427840374.354 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:34.354Z,1427840374.354 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:34.391Z,1427840374.391 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:34.393Z,1427840374.393 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:34.783Z,1427840374.783 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:34.783Z,1427840374.783 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:34.820Z,1427840374.820 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:34.822Z,1427840374.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:35.064Z,1427840375.064 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:35.065Z,1427840375.065 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:35.102Z,1427840375.102 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:35.112Z,1427840375.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:35.629Z,1427840375.629 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:35.629Z,1427840375.629 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:35.676Z,1427840375.676 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:35.678Z,1427840375.678 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:35.846Z,1427840375.846 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:35.846Z,1427840375.846 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:35.875Z,1427840375.875 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:35.885Z,1427840375.885 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:36.408Z,1427840376.408 [Rowe_600](DEBUG): 3304 bytes available, but need 4084
2015-03-31T22:19:36.475Z,1427840376.475 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:36.477Z,1427840376.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:36.872Z,1427840376.872 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:36.872Z,1427840376.872 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:36.948Z,1427840376.948 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:36.972Z,1427840376.972 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:37.443Z,1427840377.443 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:37.444Z,1427840377.444 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:37.627Z,1427840377.627 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:37.642Z,1427840377.642 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:38.042Z,1427840378.042 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:38.042Z,1427840378.042 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:38.076Z,1427840378.076 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:38.077Z,1427840378.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:38.471Z,1427840378.471 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:38.471Z,1427840378.471 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:38.517Z,1427840378.517 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:38.519Z,1427840378.519 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:38.671Z,1427840378.671 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:38.671Z,1427840378.671 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:38.708Z,1427840378.708 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:38.710Z,1427840378.710 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:39.323Z,1427840379.323 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:39.324Z,1427840379.324 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:39.369Z,1427840379.369 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:39.371Z,1427840379.371 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:39.492Z,1427840379.492 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:39.492Z,1427840379.492 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:39.541Z,1427840379.541 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:39.551Z,1427840379.551 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:40.045Z,1427840380.045 [Rowe_600](DEBUG): 2453 bytes available, but need 4084
2015-03-31T22:19:40.107Z,1427840380.107 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:40.127Z,1427840380.127 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:40.536Z,1427840380.536 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:40.537Z,1427840380.537 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:40.598Z,1427840380.598 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:40.620Z,1427840380.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:41.051Z,1427840381.051 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:41.061Z,1427840381.061 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:41.259Z,1427840381.259 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:41.284Z,1427840381.284 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:41.640Z,1427840381.640 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:41.650Z,1427840381.650 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:41.752Z,1427840381.752 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:41.762Z,1427840381.762 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:42.056Z,1427840382.056 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:42.057Z,1427840382.057 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:42.193Z,1427840382.193 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:42.208Z,1427840382.208 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:42.340Z,1427840382.340 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:42.340Z,1427840382.340 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:42.377Z,1427840382.377 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:42.387Z,1427840382.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:42.877Z,1427840382.877 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:42.878Z,1427840382.878 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:43.045Z,1427840383.045 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:43.047Z,1427840383.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:43.146Z,1427840383.146 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:43.147Z,1427840383.147 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:43.188Z,1427840383.188 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:43.190Z,1427840383.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:43.674Z,1427840383.674 [Rowe_600](DEBUG): 1523 bytes available, but need 4084
2015-03-31T22:19:43.720Z,1427840383.720 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:43.746Z,1427840383.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:44.144Z,1427840384.144 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:44.154Z,1427840384.154 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:44.299Z,1427840384.299 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:44.301Z,1427840384.301 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:44.707Z,1427840384.707 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:44.709Z,1427840384.709 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:44.900Z,1427840384.900 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:44.935Z,1427840384.935 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:45.320Z,1427840385.320 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:45.322Z,1427840385.322 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:45.552Z,1427840385.552 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:45.573Z,1427840385.573 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:45.950Z,1427840385.950 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:45.950Z,1427840385.950 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:45.980Z,1427840385.980 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:45.982Z,1427840385.982 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:46.294Z,1427840386.294 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:46.294Z,1427840386.294 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:46.352Z,1427840386.352 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:46.362Z,1427840386.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:46.758Z,1427840386.758 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:46.759Z,1427840386.759 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:46.784Z,1427840386.784 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:46.790Z,1427840386.790 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:47.135Z,1427840387.135 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:47.135Z,1427840387.135 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:47.185Z,1427840387.185 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:47.194Z,1427840387.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:47.576Z,1427840387.576 [Rowe_600](DEBUG): 3742 bytes available, but need 4084
2015-03-31T22:19:47.627Z,1427840387.627 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:47.629Z,1427840387.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:47.987Z,1427840387.987 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:47.988Z,1427840387.988 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:48.024Z,1427840388.024 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:48.026Z,1427840388.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:48.390Z,1427840388.390 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:48.390Z,1427840388.390 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:48.441Z,1427840388.441 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:48.448Z,1427840388.448 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:48.780Z,1427840388.780 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:48.781Z,1427840388.781 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:48.801Z,1427840388.801 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:48.803Z,1427840388.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:49.167Z,1427840389.167 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:49.168Z,1427840389.168 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:49.192Z,1427840389.192 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:49.198Z,1427840389.198 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:49.618Z,1427840389.618 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:49.618Z,1427840389.618 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:49.654Z,1427840389.654 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:49.656Z,1427840389.656 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:49.854Z,1427840389.854 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:49.854Z,1427840389.854 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:49.867Z,1427840389.867 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:49.868Z,1427840389.868 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:50.379Z,1427840390.379 [Rowe_600](DEBUG): 3147 bytes available, but need 4084
2015-03-31T22:19:50.422Z,1427840390.422 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:50.442Z,1427840390.442 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:50.645Z,1427840390.645 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:50.645Z,1427840390.645 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:50.658Z,1427840390.658 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:50.680Z,1427840390.680 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:51.202Z,1427840391.202 [Rowe_600](DEBUG): 2771 bytes available, but need 4084
2015-03-31T22:19:51.247Z,1427840391.247 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:51.260Z,1427840391.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:51.583Z,1427840391.583 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:51.584Z,1427840391.584 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:51.703Z,1427840391.703 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:51.709Z,1427840391.709 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:52.043Z,1427840392.043 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:52.044Z,1427840392.044 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:52.111Z,1427840392.111 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:52.113Z,1427840392.113 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:52.403Z,1427840392.403 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:52.404Z,1427840392.404 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:52.498Z,1427840392.498 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:52.500Z,1427840392.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:52.819Z,1427840392.819 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:52.821Z,1427840392.821 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:52.895Z,1427840392.895 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:52.897Z,1427840392.897 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:53.228Z,1427840393.228 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:53.229Z,1427840393.229 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:53.323Z,1427840393.323 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:53.336Z,1427840393.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:53.445Z,1427840393.445 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:53.446Z,1427840393.446 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:53.458Z,1427840393.458 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:53.472Z,1427840393.472 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:53.965Z,1427840393.965 [Rowe_600](DEBUG): 1711 bytes available, but need 4084
2015-03-31T22:19:54.007Z,1427840394.007 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:54.028Z,1427840394.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:54.239Z,1427840394.239 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:54.239Z,1427840394.239 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:54.252Z,1427840394.252 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:54.254Z,1427840394.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:54.649Z,1427840394.649 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:54.651Z,1427840394.651 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:55.054Z,1427840395.054 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:19:55.088Z,1427840395.088 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:55.105Z,1427840395.105 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:55.514Z,1427840395.514 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:55.520Z,1427840395.520 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:55.650Z,1427840395.650 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:55.669Z,1427840395.669 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:55.938Z,1427840395.938 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:55.938Z,1427840395.938 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:56.057Z,1427840396.057 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:56.074Z,1427840396.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:56.419Z,1427840396.419 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:56.425Z,1427840396.425 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:56.554Z,1427840396.554 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:56.567Z,1427840396.567 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:56.719Z,1427840396.719 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:56.720Z,1427840396.720 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:56.845Z,1427840396.845 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:56.864Z,1427840396.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:57.087Z,1427840397.087 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:57.087Z,1427840397.087 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:57.117Z,1427840397.117 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:57.119Z,1427840397.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:57.459Z,1427840397.459 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:57.459Z,1427840397.459 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:19:57.472Z,1427840397.472 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:57.474Z,1427840397.474 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:57.906Z,1427840397.906 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:19:57.915Z,1427840397.915 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:19:57.919Z,1427840397.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:19:58.255Z,1427840398.255 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:19:58.255Z,1427840398.255 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:00.830Z,1427840400.830 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:00.832Z,1427840400.832 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:00.936Z,1427840400.936 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:20:00.941Z,1427840400.941 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:00.943Z,1427840400.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:01.455Z,1427840401.455 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:01.461Z,1427840401.461 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:01.599Z,1427840401.599 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:01.602Z,1427840401.602 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:01.722Z,1427840401.722 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:01.723Z,1427840401.723 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:01.735Z,1427840401.735 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:01.737Z,1427840401.737 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:02.249Z,1427840402.249 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:02.250Z,1427840402.250 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:02.390Z,1427840402.390 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:02.407Z,1427840402.407 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:02.662Z,1427840402.662 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:02.663Z,1427840402.663 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:02.823Z,1427840402.823 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:02.835Z,1427840402.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:03.107Z,1427840403.107 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:03.108Z,1427840403.108 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:03.224Z,1427840403.224 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:03.226Z,1427840403.226 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:03.511Z,1427840403.511 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:03.512Z,1427840403.512 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:03.614Z,1427840403.614 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:03.620Z,1427840403.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:03.990Z,1427840403.990 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:03.991Z,1427840403.991 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:04.042Z,1427840404.042 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:04.044Z,1427840404.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:04.309Z,1427840404.309 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:04.310Z,1427840404.310 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:04.437Z,1427840404.437 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:04.438Z,1427840404.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:04.543Z,1427840404.543 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:04.544Z,1427840404.544 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:04.568Z,1427840404.568 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:04.571Z,1427840404.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:04.959Z,1427840404.959 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:04.960Z,1427840404.960 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:05.100Z,1427840405.100 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:05.120Z,1427840405.120 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:05.344Z,1427840405.344 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:05.344Z,1427840405.344 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:05.365Z,1427840405.365 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:05.372Z,1427840405.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:05.744Z,1427840405.744 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:05.745Z,1427840405.745 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:05.765Z,1427840405.765 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:05.767Z,1427840405.767 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:06.175Z,1427840406.175 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:06.175Z,1427840406.175 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:06.196Z,1427840406.196 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:06.204Z,1427840406.204 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:06.593Z,1427840406.593 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:06.594Z,1427840406.594 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:06.731Z,1427840406.731 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:06.748Z,1427840406.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:07.016Z,1427840407.016 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:07.018Z,1427840407.018 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:07.138Z,1427840407.138 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:07.145Z,1427840407.145 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:07.430Z,1427840407.430 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:07.430Z,1427840407.430 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:07.549Z,1427840407.549 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:07.565Z,1427840407.565 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:07.772Z,1427840407.772 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:07.773Z,1427840407.773 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:07.827Z,1427840407.827 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:07.844Z,1427840407.844 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:08.181Z,1427840408.181 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:08.181Z,1427840408.181 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:08.218Z,1427840408.218 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:08.219Z,1427840408.219 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:08.560Z,1427840408.560 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:08.561Z,1427840408.561 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:08.590Z,1427840408.590 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:08.592Z,1427840408.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:09.022Z,1427840409.022 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64a4]
2015-03-31T22:20:09.022Z,1427840409.022 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64f4]
2015-03-31T22:20:09.040Z,1427840409.040 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:09.042Z,1427840409.042 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:09.356Z,1427840409.356 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:09.358Z,1427840409.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:09.868Z,1427840409.868 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:20:09.882Z,1427840409.882 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:09.883Z,1427840409.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:10.260Z,1427840410.260 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:10.260Z,1427840410.260 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:10.314Z,1427840410.314 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:10.331Z,1427840410.331 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:10.666Z,1427840410.666 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:10.670Z,1427840410.670 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:10.746Z,1427840410.746 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:10.753Z,1427840410.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:11.049Z,1427840411.049 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:11.049Z,1427840411.049 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:11.099Z,1427840411.099 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:11.117Z,1427840411.117 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:11.439Z,1427840411.439 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:11.439Z,1427840411.439 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:11.468Z,1427840411.468 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:11.470Z,1427840411.470 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:11.877Z,1427840411.877 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:11.877Z,1427840411.877 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:11.906Z,1427840411.906 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:11.908Z,1427840411.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:12.180Z,1427840412.180 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:12.180Z,1427840412.180 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:12.193Z,1427840412.193 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:12.195Z,1427840412.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:12.710Z,1427840412.710 [Rowe_600](DEBUG): 3970 bytes available, but need 4084
2015-03-31T22:20:12.726Z,1427840412.726 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:12.728Z,1427840412.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:12.959Z,1427840412.959 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:12.960Z,1427840412.960 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:12.973Z,1427840412.973 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:12.975Z,1427840412.975 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:13.482Z,1427840413.482 [Rowe_600](DEBUG): 2991 bytes available, but need 4084
2015-03-31T22:20:13.523Z,1427840413.523 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:13.534Z,1427840413.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:13.911Z,1427840413.911 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:13.913Z,1427840413.913 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:13.978Z,1427840413.978 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:13.984Z,1427840413.984 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:14.326Z,1427840414.326 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:14.327Z,1427840414.327 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:14.374Z,1427840414.374 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:14.375Z,1427840414.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:14.717Z,1427840414.717 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:14.718Z,1427840414.718 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:14.818Z,1427840414.818 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:14.835Z,1427840414.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:15.144Z,1427840415.144 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:15.144Z,1427840415.144 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:15.201Z,1427840415.201 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:15.207Z,1427840415.207 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:15.569Z,1427840415.569 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:15.582Z,1427840415.582 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:15.621Z,1427840415.621 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:15.623Z,1427840415.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:15.835Z,1427840415.835 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:15.836Z,1427840415.836 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:15.869Z,1427840415.869 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:15.875Z,1427840415.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:16.365Z,1427840416.365 [Rowe_600](DEBUG): 3327 bytes available, but need 4084
2015-03-31T22:20:16.424Z,1427840416.424 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:16.426Z,1427840416.426 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:16.625Z,1427840416.625 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:16.625Z,1427840416.625 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:16.637Z,1427840416.637 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:16.639Z,1427840416.639 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:17.183Z,1427840417.183 [Rowe_600](DEBUG): 2900 bytes available, but need 4084
2015-03-31T22:20:17.259Z,1427840417.259 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:17.281Z,1427840417.281 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:17.580Z,1427840417.580 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:17.585Z,1427840417.585 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:17.702Z,1427840417.702 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:17.704Z,1427840417.704 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:18.065Z,1427840418.065 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:18.065Z,1427840418.065 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:18.125Z,1427840418.125 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:18.133Z,1427840418.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:18.457Z,1427840418.457 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:18.458Z,1427840418.458 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:18.505Z,1427840418.505 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:18.518Z,1427840418.518 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:18.849Z,1427840418.849 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:18.849Z,1427840418.849 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:18.880Z,1427840418.880 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:18.882Z,1427840418.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:19.275Z,1427840419.275 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:19.276Z,1427840419.276 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:19.327Z,1427840419.327 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:19.329Z,1427840419.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:19.522Z,1427840419.522 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:19.522Z,1427840419.522 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:19.535Z,1427840419.535 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:19.537Z,1427840419.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:20.055Z,1427840420.055 [Rowe_600](DEBUG): 3158 bytes available, but need 4084
2015-03-31T22:20:20.094Z,1427840420.094 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:20.110Z,1427840420.110 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:20.311Z,1427840420.311 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:20.311Z,1427840420.311 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:20.348Z,1427840420.348 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:20.350Z,1427840420.350 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:20.838Z,1427840420.838 [Rowe_600](DEBUG): 2213 bytes available, but need 4084
2015-03-31T22:20:20.882Z,1427840420.882 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:20.899Z,1427840420.899 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:21.274Z,1427840421.274 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:21.279Z,1427840421.279 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:21.388Z,1427840421.388 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:21.390Z,1427840421.390 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:21.712Z,1427840421.712 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:21.713Z,1427840421.713 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:21.787Z,1427840421.787 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:21.801Z,1427840421.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:22.108Z,1427840422.108 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:22.109Z,1427840422.109 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:22.177Z,1427840422.177 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:22.178Z,1427840422.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:22.495Z,1427840422.495 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:22.501Z,1427840422.501 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:22.570Z,1427840422.570 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:22.572Z,1427840422.572 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:22.887Z,1427840422.887 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:22.889Z,1427840422.889 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:23.005Z,1427840423.005 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:23.007Z,1427840423.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:23.158Z,1427840423.158 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:23.158Z,1427840423.158 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:23.171Z,1427840423.171 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:23.173Z,1427840423.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:23.711Z,1427840423.711 [Rowe_600](DEBUG): 2475 bytes available, but need 4084
2015-03-31T22:20:23.759Z,1427840423.759 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:23.777Z,1427840423.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:23.940Z,1427840423.940 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:23.940Z,1427840423.940 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:23.953Z,1427840423.953 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:23.954Z,1427840423.954 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:24.337Z,1427840424.337 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:24.338Z,1427840424.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:24.842Z,1427840424.842 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:24.843Z,1427840424.843 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:24.978Z,1427840424.978 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:24.996Z,1427840424.996 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:25.271Z,1427840425.271 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:25.272Z,1427840425.272 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:25.394Z,1427840425.394 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:25.405Z,1427840425.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:25.712Z,1427840425.712 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:25.713Z,1427840425.713 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:25.849Z,1427840425.849 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:25.870Z,1427840425.870 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:26.114Z,1427840426.114 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:26.119Z,1427840426.119 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:26.253Z,1427840426.253 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:26.262Z,1427840426.262 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:26.524Z,1427840426.524 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:26.525Z,1427840426.525 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:26.636Z,1427840426.636 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:26.643Z,1427840426.643 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:26.768Z,1427840426.768 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:26.769Z,1427840426.769 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:26.793Z,1427840426.793 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:26.795Z,1427840426.795 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:27.167Z,1427840427.167 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:27.169Z,1427840427.169 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:27.598Z,1427840427.598 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:27.598Z,1427840427.598 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:27.611Z,1427840427.611 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:27.629Z,1427840427.629 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:27.962Z,1427840427.962 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:27.964Z,1427840427.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:28.431Z,1427840428.431 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:20:28.436Z,1427840428.436 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:28.438Z,1427840428.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:28.820Z,1427840428.820 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:28.820Z,1427840428.820 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:28.833Z,1427840428.833 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:28.835Z,1427840428.835 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:29.221Z,1427840429.221 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:29.221Z,1427840429.221 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:29.315Z,1427840429.315 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:29.327Z,1427840429.327 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:29.612Z,1427840429.612 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:29.612Z,1427840429.612 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:29.722Z,1427840429.722 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:29.738Z,1427840429.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:30.018Z,1427840430.018 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:30.019Z,1427840430.019 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:30.174Z,1427840430.174 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:30.182Z,1427840430.182 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:30.419Z,1427840430.419 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:30.420Z,1427840430.420 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:30.445Z,1427840430.445 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:30.451Z,1427840430.451 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:30.760Z,1427840430.760 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:30.760Z,1427840430.760 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:30.819Z,1427840430.819 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:30.821Z,1427840430.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:31.265Z,1427840431.265 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:20:31.270Z,1427840431.270 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:31.273Z,1427840431.273 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:31.555Z,1427840431.555 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:31.555Z,1427840431.555 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:31.606Z,1427840431.606 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:31.608Z,1427840431.608 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:32.093Z,1427840432.093 [Rowe_600](DEBUG): 3707 bytes available, but need 4084
2015-03-31T22:20:32.135Z,1427840432.135 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:32.141Z,1427840432.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:32.481Z,1427840432.481 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:32.483Z,1427840432.483 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:32.536Z,1427840432.536 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:32.542Z,1427840432.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:32.905Z,1427840432.905 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:32.905Z,1427840432.905 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:32.930Z,1427840432.930 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:32.931Z,1427840432.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:33.302Z,1427840433.302 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:33.303Z,1427840433.303 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:33.351Z,1427840433.351 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:33.358Z,1427840433.358 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:33.696Z,1427840433.696 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:33.696Z,1427840433.696 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:33.721Z,1427840433.721 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:33.728Z,1427840433.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:34.115Z,1427840434.115 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:34.115Z,1427840434.115 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:34.141Z,1427840434.141 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:34.147Z,1427840434.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:34.353Z,1427840434.353 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:34.353Z,1427840434.353 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:34.366Z,1427840434.366 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:34.368Z,1427840434.368 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:34.874Z,1427840434.874 [Rowe_600](DEBUG): 2909 bytes available, but need 4084
2015-03-31T22:20:34.896Z,1427840434.896 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:34.929Z,1427840434.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:35.154Z,1427840435.154 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:35.154Z,1427840435.154 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:35.188Z,1427840435.188 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:35.190Z,1427840435.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:35.679Z,1427840435.679 [Rowe_600](DEBUG): 2277 bytes available, but need 4084
2015-03-31T22:20:35.721Z,1427840435.721 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:35.729Z,1427840435.729 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:36.075Z,1427840436.075 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:36.076Z,1427840436.076 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:36.205Z,1427840436.205 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:36.221Z,1427840436.221 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:36.500Z,1427840436.500 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:36.501Z,1427840436.501 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:36.614Z,1427840436.614 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:36.620Z,1427840436.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:36.913Z,1427840436.913 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:36.914Z,1427840436.914 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:37.010Z,1427840437.010 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:37.012Z,1427840437.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:37.348Z,1427840437.348 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:37.349Z,1427840437.349 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:37.411Z,1427840437.411 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:37.413Z,1427840437.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:37.686Z,1427840437.686 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:37.688Z,1427840437.688 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:37.820Z,1427840437.820 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:37.830Z,1427840437.830 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:37.972Z,1427840437.972 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:37.973Z,1427840437.973 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:37.986Z,1427840437.986 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:37.987Z,1427840437.987 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:38.472Z,1427840438.472 [Rowe_600](DEBUG): 1621 bytes available, but need 4084
2015-03-31T22:20:38.496Z,1427840438.496 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:38.505Z,1427840438.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:38.770Z,1427840438.770 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:38.770Z,1427840438.770 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:38.783Z,1427840438.783 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:38.785Z,1427840438.785 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:39.169Z,1427840439.169 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:39.174Z,1427840439.174 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:39.176Z,1427840439.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:39.585Z,1427840439.585 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:39.602Z,1427840439.602 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:39.603Z,1427840439.603 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:39.729Z,1427840439.729 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:39.745Z,1427840439.745 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:40.049Z,1427840440.049 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:40.066Z,1427840440.066 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:40.067Z,1427840440.067 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:40.185Z,1427840440.185 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:40.202Z,1427840440.202 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:40.439Z,1427840440.439 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:40.456Z,1427840440.456 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:40.466Z,1427840440.466 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:40.605Z,1427840440.605 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:40.619Z,1427840440.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:40.902Z,1427840440.902 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:40.924Z,1427840440.924 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:40.925Z,1427840440.925 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:41.060Z,1427840441.060 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:41.077Z,1427840441.077 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:41.181Z,1427840441.181 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:41.203Z,1427840441.203 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:41.204Z,1427840441.204 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:41.334Z,1427840441.334 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:41.354Z,1427840441.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:41.403Z,1427840441.403 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-03-31T22:20:41.404Z,1427840441.404 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-03-31T22:20:41.405Z,1427840441.405 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-03-31T22:20:41.432Z,1427840441.432 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-03-31T22:20:41.433Z,1427840441.433 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-03-31T22:20:41.581Z,1427840441.581 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:41.587Z,1427840441.587 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:41.588Z,1427840441.588 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:41.613Z,1427840441.613 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:41.619Z,1427840441.619 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:41.628Z,1427840441.628 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 1.816471 min 
2015-03-31T22:20:41.632Z,1427840441.632 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-03-31T22:20:41.632Z,1427840441.632 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-03-31T22:20:41.632Z,1427840441.632 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-03-31T22:20:41.632Z,1427840441.632 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-03-31T22:20:41.979Z,1427840441.979 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:41.984Z,1427840441.984 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:41.986Z,1427840441.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:42.412Z,1427840442.412 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:42.413Z,1427840442.413 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:20:42.418Z,1427840442.418 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:42.420Z,1427840442.420 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:42.776Z,1427840442.776 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:42.778Z,1427840442.778 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:42.778Z,1427840442.778 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:42.792Z,1427840442.792 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:42.809Z,1427840442.809 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:43.270Z,1427840443.270 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:43.270Z,1427840443.270 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:20:43.275Z,1427840443.275 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:43.277Z,1427840443.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:43.656Z,1427840443.656 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:43.658Z,1427840443.658 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:43.658Z,1427840443.658 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:43.671Z,1427840443.671 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:43.673Z,1427840443.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:44.049Z,1427840444.049 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:44.056Z,1427840444.056 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:44.056Z,1427840444.056 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:44.302Z,1427840444.302 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:44.308Z,1427840444.308 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:44.566Z,1427840444.566 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:44.588Z,1427840444.588 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:44.589Z,1427840444.589 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:44.719Z,1427840444.719 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:44.736Z,1427840444.736 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:44.869Z,1427840444.869 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:44.876Z,1427840444.876 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:44.876Z,1427840444.876 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:44.952Z,1427840444.952 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:44.971Z,1427840444.971 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:45.280Z,1427840445.280 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:45.283Z,1427840445.283 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:45.288Z,1427840445.288 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:45.314Z,1427840445.314 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:45.320Z,1427840445.320 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:45.653Z,1427840445.653 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:45.655Z,1427840445.655 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:45.655Z,1427840445.655 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:45.724Z,1427840445.724 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:45.730Z,1427840445.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:46.118Z,1427840446.118 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:46.119Z,1427840446.119 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:20:46.157Z,1427840446.157 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:46.178Z,1427840446.178 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:46.471Z,1427840446.471 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:46.473Z,1427840446.473 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:46.474Z,1427840446.474 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:46.487Z,1427840446.487 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:46.489Z,1427840446.489 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:46.969Z,1427840446.969 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:46.969Z,1427840446.969 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:20:46.975Z,1427840446.975 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:46.977Z,1427840446.977 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:47.359Z,1427840447.359 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:47.361Z,1427840447.361 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:47.361Z,1427840447.361 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:47.375Z,1427840447.375 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:47.376Z,1427840447.376 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:47.750Z,1427840447.750 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:47.752Z,1427840447.752 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:47.753Z,1427840447.753 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:47.794Z,1427840447.794 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:47.810Z,1427840447.810 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:48.149Z,1427840448.149 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:48.151Z,1427840448.151 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:48.151Z,1427840448.151 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:48.240Z,1427840448.240 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:48.261Z,1427840448.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:48.539Z,1427840448.539 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:48.546Z,1427840448.546 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:48.546Z,1427840448.546 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:48.572Z,1427840448.572 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:48.576Z,1427840448.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:48.962Z,1427840448.962 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:48.964Z,1427840448.964 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:48.965Z,1427840448.965 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:48.997Z,1427840448.997 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:49.003Z,1427840449.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:49.261Z,1427840449.261 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:49.264Z,1427840449.264 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:49.265Z,1427840449.265 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:49.296Z,1427840449.296 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:49.297Z,1427840449.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:49.807Z,1427840449.807 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:49.814Z,1427840449.814 [Rowe_600](DEBUG): 4074 bytes available, but need 4084
2015-03-31T22:20:49.826Z,1427840449.826 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:49.828Z,1427840449.828 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:50.065Z,1427840450.065 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:50.067Z,1427840450.067 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:50.067Z,1427840450.067 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:50.080Z,1427840450.080 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:50.083Z,1427840450.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:50.581Z,1427840450.581 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:50.584Z,1427840450.584 [Rowe_600](DEBUG): 3034 bytes available, but need 4084
2015-03-31T22:20:50.603Z,1427840450.603 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:50.647Z,1427840450.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:50.968Z,1427840450.968 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:50.989Z,1427840450.989 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:50.990Z,1427840450.990 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:51.068Z,1427840451.068 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:51.074Z,1427840451.074 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:51.393Z,1427840451.393 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:51.414Z,1427840451.414 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:51.415Z,1427840451.415 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:51.467Z,1427840451.467 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:51.469Z,1427840451.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:51.801Z,1427840451.801 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:51.823Z,1427840451.823 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:51.824Z,1427840451.824 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:51.852Z,1427840451.852 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:51.854Z,1427840451.854 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:52.190Z,1427840452.190 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:52.212Z,1427840452.212 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:52.213Z,1427840452.213 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:52.254Z,1427840452.254 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:52.260Z,1427840452.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:52.589Z,1427840452.589 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:52.612Z,1427840452.612 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:52.613Z,1427840452.613 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:52.684Z,1427840452.684 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:52.686Z,1427840452.686 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:52.867Z,1427840452.867 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:52.869Z,1427840452.869 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:52.869Z,1427840452.869 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:52.881Z,1427840452.881 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:52.883Z,1427840452.883 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:53.409Z,1427840453.409 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:53.412Z,1427840453.412 [Rowe_600](DEBUG): 2771 bytes available, but need 4084
2015-03-31T22:20:53.455Z,1427840453.455 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:53.468Z,1427840453.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:53.665Z,1427840453.665 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:53.667Z,1427840453.667 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:53.667Z,1427840453.667 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:53.705Z,1427840453.705 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:53.706Z,1427840453.706 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:54.196Z,1427840454.196 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:54.200Z,1427840454.200 [Rowe_600](DEBUG): 1944 bytes available, but need 4084
2015-03-31T22:20:54.219Z,1427840454.219 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:54.227Z,1427840454.227 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:54.635Z,1427840454.635 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:54.637Z,1427840454.637 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:54.637Z,1427840454.637 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:54.749Z,1427840454.749 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:54.771Z,1427840454.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:55.031Z,1427840455.031 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:55.052Z,1427840455.052 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d633c]
2015-03-31T22:20:55.053Z,1427840455.053 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d638c]
2015-03-31T22:20:55.166Z,1427840455.166 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:55.172Z,1427840455.172 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:55.399Z,1427840455.399 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:55.411Z,1427840455.411 [Rowe_600](DEBUG): 2461 bytes available, but need 4084
2015-03-31T22:20:55.451Z,1427840455.451 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:55.471Z,1427840455.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:55.809Z,1427840455.809 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:55.826Z,1427840455.826 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:55.827Z,1427840455.827 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:55.942Z,1427840455.942 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:55.944Z,1427840455.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:56.210Z,1427840456.210 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:56.228Z,1427840456.228 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:56.229Z,1427840456.229 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:56.366Z,1427840456.366 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:56.375Z,1427840456.375 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:56.466Z,1427840456.466 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:56.467Z,1427840456.467 [Rowe_600](DEBUG): 4076 bytes available, but need 4084
2015-03-31T22:20:56.479Z,1427840456.479 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:56.482Z,1427840456.482 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:56.858Z,1427840456.858 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:56.859Z,1427840456.859 [Rowe_600](DEBUG): 4076 bytes available, but need 4084
2015-03-31T22:20:56.864Z,1427840456.864 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:56.866Z,1427840456.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:57.268Z,1427840457.268 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:57.271Z,1427840457.271 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64a4]
2015-03-31T22:20:57.271Z,1427840457.271 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64f4]
2015-03-31T22:20:57.284Z,1427840457.284 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:57.286Z,1427840457.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:57.670Z,1427840457.670 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:57.675Z,1427840457.675 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:57.677Z,1427840457.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:58.109Z,1427840458.109 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:58.110Z,1427840458.110 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:20:58.173Z,1427840458.173 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:58.190Z,1427840458.190 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:58.460Z,1427840458.460 [NAL9602](FAULT): MT Queue status failed to be acquired within timeout. Will not retry this session.
2015-03-31T22:20:58.505Z,1427840458.505 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:58.507Z,1427840458.507 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:58.507Z,1427840458.507 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:58.702Z,1427840458.702 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:58.718Z,1427840458.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:58.984Z,1427840458.984 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:59.007Z,1427840459.007 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:59.008Z,1427840459.008 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:59.108Z,1427840459.108 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:59.116Z,1427840459.116 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:59.440Z,1427840459.440 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:59.457Z,1427840459.457 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:59.463Z,1427840459.463 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:59.614Z,1427840459.614 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:59.635Z,1427840459.635 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:20:59.793Z,1427840459.793 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:20:59.815Z,1427840459.815 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:20:59.816Z,1427840459.816 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:20:59.949Z,1427840459.949 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:20:59.965Z,1427840459.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:00.143Z,1427840460.143 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:00.145Z,1427840460.145 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:00.146Z,1427840460.146 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:00.196Z,1427840460.196 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:00.197Z,1427840460.197 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:00.524Z,1427840460.524 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:00.526Z,1427840460.526 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:00.526Z,1427840460.526 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:00.597Z,1427840460.597 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:00.605Z,1427840460.605 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:00.965Z,1427840460.965 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:00.966Z,1427840460.966 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:21:00.971Z,1427840460.971 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:00.973Z,1427840460.973 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:01.328Z,1427840461.328 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:01.330Z,1427840461.330 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:01.330Z,1427840461.330 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:01.352Z,1427840461.352 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:01.354Z,1427840461.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:01.815Z,1427840461.815 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:01.816Z,1427840461.816 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:21:01.825Z,1427840461.825 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:01.831Z,1427840461.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:02.203Z,1427840462.203 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:02.205Z,1427840462.205 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:02.205Z,1427840462.205 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:02.270Z,1427840462.270 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:02.286Z,1427840462.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:02.604Z,1427840462.604 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:02.606Z,1427840462.606 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:02.606Z,1427840462.606 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:02.724Z,1427840462.724 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:02.730Z,1427840462.730 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:02.994Z,1427840462.994 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:03.001Z,1427840463.001 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:03.001Z,1427840463.001 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:03.097Z,1427840463.097 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:03.114Z,1427840463.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:03.393Z,1427840463.393 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:03.395Z,1427840463.395 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:03.396Z,1427840463.396 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:03.425Z,1427840463.425 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:03.427Z,1427840463.427 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:03.815Z,1427840463.815 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:03.829Z,1427840463.829 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:03.830Z,1427840463.830 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:03.854Z,1427840463.854 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:03.855Z,1427840463.855 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:04.125Z,1427840464.125 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:04.127Z,1427840464.127 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:04.128Z,1427840464.128 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:04.140Z,1427840464.140 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:04.142Z,1427840464.142 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:04.658Z,1427840464.658 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:04.658Z,1427840464.658 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:21:04.672Z,1427840464.672 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:04.673Z,1427840464.673 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:04.931Z,1427840464.931 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:04.933Z,1427840464.933 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:04.933Z,1427840464.933 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:04.945Z,1427840464.945 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:04.947Z,1427840464.947 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:05.462Z,1427840465.462 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:05.469Z,1427840465.469 [Rowe_600](DEBUG): 3559 bytes available, but need 4084
2015-03-31T22:21:05.512Z,1427840465.512 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:05.515Z,1427840465.515 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:05.865Z,1427840465.865 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:05.873Z,1427840465.873 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:05.874Z,1427840465.874 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:05.923Z,1427840465.922 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:05.929Z,1427840465.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:06.292Z,1427840466.292 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:06.299Z,1427840466.299 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:06.299Z,1427840466.299 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:06.366Z,1427840466.366 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:06.373Z,1427840466.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:06.681Z,1427840466.681 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:06.687Z,1427840466.687 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:06.688Z,1427840466.688 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:06.731Z,1427840466.731 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:06.748Z,1427840466.748 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:07.076Z,1427840467.076 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:07.082Z,1427840467.082 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:07.082Z,1427840467.082 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:07.107Z,1427840467.107 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:07.109Z,1427840467.109 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:07.506Z,1427840467.506 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:07.523Z,1427840467.523 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:07.524Z,1427840467.524 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:07.550Z,1427840467.550 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:07.571Z,1427840467.571 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:07.732Z,1427840467.732 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:07.734Z,1427840467.734 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:07.734Z,1427840467.734 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:07.747Z,1427840467.747 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:07.749Z,1427840467.749 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:08.279Z,1427840468.279 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:08.281Z,1427840468.281 [Rowe_600](DEBUG): 3124 bytes available, but need 4084
2015-03-31T22:21:08.337Z,1427840468.337 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:08.354Z,1427840468.354 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:08.548Z,1427840468.548 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:08.550Z,1427840468.550 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:08.550Z,1427840468.550 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:08.586Z,1427840468.586 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:08.587Z,1427840468.587 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:09.098Z,1427840469.098 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:09.106Z,1427840469.106 [Rowe_600](DEBUG): 2655 bytes available, but need 4084
2015-03-31T22:21:09.149Z,1427840469.149 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:09.170Z,1427840469.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:09.487Z,1427840469.487 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:09.503Z,1427840469.503 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:09.505Z,1427840469.505 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:09.616Z,1427840469.616 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:09.620Z,1427840469.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:09.935Z,1427840469.935 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:09.957Z,1427840469.957 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:09.957Z,1427840469.957 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:10.056Z,1427840470.056 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:10.076Z,1427840470.076 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:10.397Z,1427840470.397 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:10.404Z,1427840470.404 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:10.404Z,1427840470.404 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:10.427Z,1427840470.427 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:10.449Z,1427840470.449 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:10.781Z,1427840470.781 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:10.783Z,1427840470.783 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:10.783Z,1427840470.783 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:10.813Z,1427840470.813 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:10.814Z,1427840470.814 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:11.199Z,1427840471.199 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:11.214Z,1427840471.214 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:11.215Z,1427840471.215 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:11.243Z,1427840471.243 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:11.245Z,1427840471.245 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:11.459Z,1427840471.459 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:11.462Z,1427840471.462 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:11.462Z,1427840471.462 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:11.474Z,1427840471.474 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:11.476Z,1427840471.476 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:11.973Z,1427840471.973 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:11.976Z,1427840471.976 [Rowe_600](DEBUG): 2941 bytes available, but need 4084
2015-03-31T22:21:12.000Z,1427840472.000 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:12.028Z,1427840472.028 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:12.242Z,1427840472.242 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:12.244Z,1427840472.244 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:12.244Z,1427840472.244 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:12.257Z,1427840472.257 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:12.258Z,1427840472.258 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:12.771Z,1427840472.771 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:12.773Z,1427840472.773 [Rowe_600](DEBUG): 2219 bytes available, but need 4084
2015-03-31T22:21:12.959Z,1427840472.959 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:12.965Z,1427840472.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:13.297Z,1427840473.297 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:13.320Z,1427840473.320 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:13.321Z,1427840473.321 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:13.346Z,1427840473.346 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:13.352Z,1427840473.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:13.713Z,1427840473.713 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:13.715Z,1427840473.715 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:13.791Z,1427840473.791 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:13.812Z,1427840473.812 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:14.113Z,1427840474.113 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:14.114Z,1427840474.114 [Rowe_600](DEBUG): 3791 bytes available, but need 4084
2015-03-31T22:21:14.131Z,1427840474.131 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:14.133Z,1427840474.133 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:14.470Z,1427840474.470 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:14.480Z,1427840474.480 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:14.481Z,1427840474.481 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:14.533Z,1427840474.533 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:14.535Z,1427840474.535 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:14.886Z,1427840474.886 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:14.895Z,1427840474.895 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d6484]
2015-03-31T22:21:14.896Z,1427840474.896 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64d4]
2015-03-31T22:21:14.962Z,1427840474.962 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:14.964Z,1427840474.964 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:15.270Z,1427840475.270 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:15.276Z,1427840475.276 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:15.277Z,1427840475.277 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:15.729Z,1427840475.729 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:15.734Z,1427840475.734 [Rowe_600](DEBUG): 3501 bytes available, but need 4084
2015-03-31T22:21:15.783Z,1427840475.783 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:15.789Z,1427840475.789 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:16.013Z,1427840476.013 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:16.015Z,1427840476.015 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:16.015Z,1427840476.015 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:16.028Z,1427840476.028 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:16.030Z,1427840476.030 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:16.531Z,1427840476.531 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:16.533Z,1427840476.533 [Rowe_600](DEBUG): 2797 bytes available, but need 4084
2015-03-31T22:21:16.553Z,1427840476.553 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:16.592Z,1427840476.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:16.906Z,1427840476.906 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:16.914Z,1427840476.914 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:16.915Z,1427840476.915 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:17.032Z,1427840477.032 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:17.034Z,1427840477.034 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:17.339Z,1427840477.339 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:17.356Z,1427840477.356 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d647c]
2015-03-31T22:21:17.357Z,1427840477.357 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64cc]
2015-03-31T22:21:17.442Z,1427840477.442 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:17.444Z,1427840477.444 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:17.818Z,1427840477.818 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:17.824Z,1427840477.824 [Rowe_600](DEBUG): 3141 bytes available, but need 4084
2015-03-31T22:21:17.833Z,1427840477.833 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:17.834Z,1427840477.834 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:18.205Z,1427840478.205 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:18.207Z,1427840478.207 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:18.207Z,1427840478.207 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:18.236Z,1427840478.236 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:18.238Z,1427840478.238 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:18.589Z,1427840478.589 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:18.606Z,1427840478.606 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:18.607Z,1427840478.607 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:18.656Z,1427840478.656 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:18.658Z,1427840478.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:18.836Z,1427840478.836 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:18.838Z,1427840478.838 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:18.838Z,1427840478.838 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:18.872Z,1427840478.872 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:18.873Z,1427840478.873 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:19.375Z,1427840479.375 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:19.383Z,1427840479.383 [Rowe_600](DEBUG): 2791 bytes available, but need 4084
2015-03-31T22:21:19.414Z,1427840479.414 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:19.431Z,1427840479.431 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:19.652Z,1427840479.652 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:19.655Z,1427840479.655 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:19.655Z,1427840479.655 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:19.672Z,1427840479.672 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:19.674Z,1427840479.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:20.162Z,1427840480.162 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:20.164Z,1427840480.164 [Rowe_600](DEBUG): 1889 bytes available, but need 4084
2015-03-31T22:21:20.187Z,1427840480.187 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:20.230Z,1427840480.230 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:20.575Z,1427840480.575 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:20.604Z,1427840480.604 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:20.605Z,1427840480.605 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:20.744Z,1427840480.744 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:20.746Z,1427840480.746 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:21.017Z,1427840481.017 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:21.035Z,1427840481.035 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:21.040Z,1427840481.040 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:21.139Z,1427840481.139 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:21.141Z,1427840481.141 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:21.404Z,1427840481.404 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:21.426Z,1427840481.426 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:21.427Z,1427840481.427 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:21.525Z,1427840481.525 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:21.527Z,1427840481.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:21.820Z,1427840481.820 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:21.841Z,1427840481.841 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:21.842Z,1427840481.842 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:21.924Z,1427840481.924 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:21.930Z,1427840481.930 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:22.196Z,1427840482.196 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:22.213Z,1427840482.213 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:22.219Z,1427840482.219 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:22.344Z,1427840482.344 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:22.346Z,1427840482.346 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:22.451Z,1427840482.451 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:22.453Z,1427840482.453 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:22.453Z,1427840482.453 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:22.477Z,1427840482.477 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:22.488Z,1427840482.488 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:22.866Z,1427840482.866 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:22.869Z,1427840482.869 [Rowe_600](DEBUG): 203 bytes available, but need 4084
2015-03-31T22:21:22.935Z,1427840482.935 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:22.952Z,1427840482.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:23.252Z,1427840483.252 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:23.255Z,1427840483.255 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:23.256Z,1427840483.256 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:23.270Z,1427840483.270 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:23.272Z,1427840483.272 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:23.656Z,1427840483.656 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:23.661Z,1427840483.661 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:23.662Z,1427840483.662 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:24.135Z,1427840484.135 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:24.161Z,1427840484.161 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:24.162Z,1427840484.162 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:24.286Z,1427840484.286 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:24.306Z,1427840484.306 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:24.535Z,1427840484.535 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:24.561Z,1427840484.561 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:24.562Z,1427840484.562 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:24.695Z,1427840484.695 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:24.702Z,1427840484.702 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:25.035Z,1427840485.035 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:25.049Z,1427840485.049 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:25.060Z,1427840485.060 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:25.183Z,1427840485.183 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:25.200Z,1427840485.200 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:25.483Z,1427840485.483 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:25.500Z,1427840485.500 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:25.501Z,1427840485.501 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:25.622Z,1427840485.622 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:25.628Z,1427840485.628 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:25.825Z,1427840485.825 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:25.843Z,1427840485.843 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:25.852Z,1427840485.852 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:25.982Z,1427840485.982 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:25.989Z,1427840485.989 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:26.152Z,1427840486.152 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:26.154Z,1427840486.154 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:26.154Z,1427840486.154 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:26.187Z,1427840486.187 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:26.193Z,1427840486.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:26.520Z,1427840486.520 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:26.526Z,1427840486.526 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:26.527Z,1427840486.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:26.943Z,1427840486.943 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:26.944Z,1427840486.944 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:21:26.949Z,1427840486.949 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:26.951Z,1427840486.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:27.313Z,1427840487.313 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:27.315Z,1427840487.315 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:27.316Z,1427840487.316 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:27.427Z,1427840487.427 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:27.434Z,1427840487.434 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:28.102Z,1427840488.102 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:28.124Z,1427840488.124 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:28.125Z,1427840488.125 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:28.174Z,1427840488.174 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:28.180Z,1427840488.180 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:28.541Z,1427840488.541 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:28.548Z,1427840488.548 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:28.548Z,1427840488.548 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:28.588Z,1427840488.588 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:28.595Z,1427840488.595 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:28.928Z,1427840488.928 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:28.936Z,1427840488.936 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:28.936Z,1427840488.936 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:29.008Z,1427840489.008 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:29.026Z,1427840489.026 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:29.336Z,1427840489.336 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:29.342Z,1427840489.342 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:29.343Z,1427840489.343 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:29.367Z,1427840489.367 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:29.373Z,1427840489.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:29.753Z,1427840489.753 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:29.755Z,1427840489.755 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:29.756Z,1427840489.756 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:29.801Z,1427840489.801 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:29.807Z,1427840489.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:29.998Z,1427840489.998 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:30.000Z,1427840490.000 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:30.001Z,1427840490.001 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:30.013Z,1427840490.013 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:30.035Z,1427840490.035 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:30.514Z,1427840490.514 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:30.517Z,1427840490.517 [Rowe_600](DEBUG): 2958 bytes available, but need 4084
2015-03-31T22:21:30.593Z,1427840490.593 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:30.610Z,1427840490.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:30.784Z,1427840490.784 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:30.786Z,1427840490.786 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:30.786Z,1427840490.786 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:30.799Z,1427840490.799 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:30.801Z,1427840490.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:31.325Z,1427840491.325 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:31.332Z,1427840491.332 [Rowe_600](DEBUG): 2384 bytes available, but need 4084
2015-03-31T22:21:31.375Z,1427840491.375 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:31.391Z,1427840491.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:31.743Z,1427840491.743 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:31.751Z,1427840491.751 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:31.771Z,1427840491.771 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:31.868Z,1427840491.868 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:31.877Z,1427840491.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:32.153Z,1427840492.153 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:32.173Z,1427840492.173 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:32.174Z,1427840492.174 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:32.273Z,1427840492.273 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:32.292Z,1427840492.292 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:32.603Z,1427840492.603 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:32.625Z,1427840492.625 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:32.626Z,1427840492.626 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:32.653Z,1427840492.653 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:32.667Z,1427840492.667 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:33.005Z,1427840493.005 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:33.022Z,1427840493.022 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:33.027Z,1427840493.027 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:33.058Z,1427840493.058 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:33.060Z,1427840493.060 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:33.432Z,1427840493.432 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:33.450Z,1427840493.450 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:33.455Z,1427840493.455 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:33.491Z,1427840493.491 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:33.493Z,1427840493.493 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:33.644Z,1427840493.644 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:33.646Z,1427840493.646 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:33.646Z,1427840493.646 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:33.671Z,1427840493.671 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:33.674Z,1427840493.674 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:34.194Z,1427840494.194 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:34.197Z,1427840494.197 [Rowe_600](DEBUG): 2612 bytes available, but need 4084
2015-03-31T22:21:34.219Z,1427840494.219 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:34.243Z,1427840494.243 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:34.444Z,1427840494.444 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:34.446Z,1427840494.446 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:34.447Z,1427840494.447 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:34.484Z,1427840494.484 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:34.490Z,1427840494.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:34.942Z,1427840494.942 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:34.950Z,1427840494.950 [Rowe_600](DEBUG): 1317 bytes available, but need 4084
2015-03-31T22:21:34.993Z,1427840494.993 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:35.013Z,1427840495.013 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:35.380Z,1427840495.380 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:35.397Z,1427840495.397 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:35.403Z,1427840495.403 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:35.548Z,1427840495.548 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:35.563Z,1427840495.563 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:35.835Z,1427840495.835 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:35.852Z,1427840495.852 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:35.853Z,1427840495.853 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:35.966Z,1427840495.966 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:35.968Z,1427840495.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:36.213Z,1427840496.213 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:36.230Z,1427840496.230 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:36.231Z,1427840496.231 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:36.350Z,1427840496.350 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:36.352Z,1427840496.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:36.617Z,1427840496.617 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:36.634Z,1427840496.634 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:36.635Z,1427840496.635 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:36.746Z,1427840496.746 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:36.752Z,1427840496.752 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:37.014Z,1427840497.014 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:37.031Z,1427840497.031 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:37.037Z,1427840497.037 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:37.169Z,1427840497.169 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:37.174Z,1427840497.174 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:37.279Z,1427840497.279 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:37.285Z,1427840497.285 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:37.286Z,1427840497.286 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:37.313Z,1427840497.313 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:37.319Z,1427840497.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:37.661Z,1427840497.661 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:37.691Z,1427840497.691 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:37.707Z,1427840497.707 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:38.071Z,1427840498.071 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:38.072Z,1427840498.072 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:21:38.077Z,1427840498.077 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:38.079Z,1427840498.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:38.479Z,1427840498.479 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:38.482Z,1427840498.482 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:38.482Z,1427840498.482 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:38.521Z,1427840498.521 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:38.527Z,1427840498.527 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:38.915Z,1427840498.915 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:38.917Z,1427840498.917 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:38.918Z,1427840498.918 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:38.995Z,1427840498.995 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:39.016Z,1427840499.016 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:39.306Z,1427840499.306 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:39.307Z,1427840499.307 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:21:39.331Z,1427840499.331 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:39.343Z,1427840499.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:39.704Z,1427840499.704 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:39.719Z,1427840499.719 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:39.720Z,1427840499.720 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:39.859Z,1427840499.859 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:39.876Z,1427840499.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:40.134Z,1427840500.134 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:40.151Z,1427840500.151 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:40.153Z,1427840500.153 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:40.288Z,1427840500.288 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:40.305Z,1427840500.305 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:40.510Z,1427840500.510 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:40.516Z,1427840500.516 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:40.516Z,1427840500.516 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:40.595Z,1427840500.595 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:40.613Z,1427840500.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:40.919Z,1427840500.919 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:40.921Z,1427840500.921 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:40.921Z,1427840500.921 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:40.950Z,1427840500.950 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:40.952Z,1427840500.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:41.306Z,1427840501.306 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:41.308Z,1427840501.308 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:41.308Z,1427840501.308 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:41.322Z,1427840501.322 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:41.324Z,1427840501.324 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:41.764Z,1427840501.764 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:41.765Z,1427840501.765 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:21:41.771Z,1427840501.771 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:41.773Z,1427840501.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:42.113Z,1427840502.114 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:42.115Z,1427840502.115 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:42.116Z,1427840502.116 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:42.128Z,1427840502.128 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:42.131Z,1427840502.131 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:42.626Z,1427840502.626 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:42.626Z,1427840502.626 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:21:42.998Z,1427840502.998 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:42.000Z,1427840503.000 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:42.000Z,1427840503.000 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 2
2015-03-31T22:21:42.000Z,1427840503.000 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2015-03-31T22:21:43.011Z,1427840503.011 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:43.011Z,1427840503.011 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 2
2015-03-31T22:21:43.011Z,1427840503.011 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2015-03-31T22:21:43.013Z,1427840503.013 [DeadReckonWithRespectToWater](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:43.013Z,1427840503.013 [DeadReckonWithRespectToWater] Software Fault, FailCount= 2
2015-03-31T22:21:43.013Z,1427840503.013 [DeadReckonWithRespectToWater](ERROR): Software Fault
2015-03-31T22:21:43.024Z,1427840503.024 [DeadReckonWithRespectToSeafloor](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:43.024Z,1427840503.024 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2015-03-31T22:21:43.024Z,1427840503.024 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2015-03-31T22:21:43.079Z,1427840503.079 [DeadReckonUsingDVLWaterTrack](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:43.080Z,1427840503.080 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2015-03-31T22:21:43.080Z,1427840503.080 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2015-03-31T22:21:43.337Z,1427840503.337 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2015-03-31T22:21:43.338Z,1427840503.338 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2015-03-31T22:21:43.343Z,1427840503.343 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2015-03-31T22:21:43.344Z,1427840503.344 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2015-03-31T22:21:43.345Z,1427840503.345 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2015-03-31T22:21:43.745Z,1427840503.745 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:43.796Z,1427840503.796 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:43.799Z,1427840503.799 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:44.069Z,1427840504.069 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:44.165Z,1427840504.165 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2015-03-31T22:21:44.165Z,1427840504.165 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 2
2015-03-31T22:21:44.166Z,1427840504.166 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2015-03-31T22:21:44.166Z,1427840504.166 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 2
2015-03-31T22:21:44.166Z,1427840504.166 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2015-03-31T22:21:44.166Z,1427840504.166 [DeadReckonWithRespectToWater] No Fault, FailCount= 2
2015-03-31T22:21:44.167Z,1427840504.167 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2015-03-31T22:21:44.167Z,1427840504.167 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2015-03-31T22:21:44.172Z,1427840504.172 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2015-03-31T22:21:44.172Z,1427840504.172 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2015-03-31T22:21:44.258Z,1427840504.258 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:44.296Z,1427840504.296 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:44.298Z,1427840504.298 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:44.599Z,1427840504.599 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:44.600Z,1427840504.600 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2015-03-31T22:21:44.605Z,1427840504.605 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2015-03-31T22:21:44.605Z,1427840504.605 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2015-03-31T22:21:44.605Z,1427840504.605 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2015-03-31T22:21:44.606Z,1427840504.606 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2015-03-31T22:21:44.733Z,1427840504.733 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:44.736Z,1427840504.736 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:44.736Z,1427840504.736 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:44.781Z,1427840504.781 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:44.782Z,1427840504.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:21:44.783Z,1427840504.783 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:45.081Z,1427840505.081 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:45.084Z,1427840505.084 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:45.084Z,1427840505.084 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:45.203Z,1427840505.203 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:45.218Z,1427840505.218 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:21:45.223Z,1427840505.223 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:45.498Z,1427840505.498 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:45.500Z,1427840505.500 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:45.500Z,1427840505.500 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:45.549Z,1427840505.549 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:45.554Z,1427840505.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:21:45.556Z,1427840505.556 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:45.858Z,1427840505.858 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:45.861Z,1427840505.861 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:45.861Z,1427840505.861 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:45.873Z,1427840505.873 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:45.875Z,1427840505.875 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:21:45.876Z,1427840505.876 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:46.336Z,1427840506.336 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:46.338Z,1427840506.338 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:46.338Z,1427840506.338 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:46.460Z,1427840506.460 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:46.465Z,1427840506.465 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:21:46.469Z,1427840506.469 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:46.728Z,1427840506.728 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:46.730Z,1427840506.730 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:46.730Z,1427840506.730 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:46.846Z,1427840506.846 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:46.851Z,1427840506.851 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:21:46.866Z,1427840506.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:47.170Z,1427840507.170 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:47.187Z,1427840507.187 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:47.193Z,1427840507.193 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:47.322Z,1427840507.322 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:47.338Z,1427840507.338 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:47.655Z,1427840507.655 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:47.687Z,1427840507.687 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:47.689Z,1427840507.689 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:47.810Z,1427840507.810 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:47.817Z,1427840507.817 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:47.992Z,1427840507.992 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:48.014Z,1427840508.014 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:48.015Z,1427840508.015 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:48.140Z,1427840508.140 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:48.161Z,1427840508.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:48.349Z,1427840508.349 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:48.356Z,1427840508.356 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:48.356Z,1427840508.356 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:48.381Z,1427840508.381 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:48.387Z,1427840508.387 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:48.746Z,1427840508.746 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:48.764Z,1427840508.764 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:48.764Z,1427840508.764 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:48.776Z,1427840508.776 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:48.778Z,1427840508.778 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:49.185Z,1427840509.185 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:49.185Z,1427840509.185 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:21:49.191Z,1427840509.191 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:49.193Z,1427840509.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:49.548Z,1427840509.548 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:49.550Z,1427840509.550 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:49.550Z,1427840509.550 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:49.605Z,1427840509.605 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:49.606Z,1427840509.606 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:50.028Z,1427840510.028 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:50.032Z,1427840510.032 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:21:50.044Z,1427840510.044 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:50.046Z,1427840510.046 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:50.419Z,1427840510.419 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:50.421Z,1427840510.421 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:50.421Z,1427840510.421 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:50.434Z,1427840510.434 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:50.436Z,1427840510.436 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:50.817Z,1427840510.817 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:50.824Z,1427840510.824 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:50.824Z,1427840510.824 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:50.899Z,1427840510.899 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:50.916Z,1427840510.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:51.215Z,1427840511.215 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:51.217Z,1427840511.217 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:51.217Z,1427840511.217 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:51.343Z,1427840511.343 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:51.351Z,1427840511.351 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:51.612Z,1427840511.612 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:51.614Z,1427840511.614 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:51.614Z,1427840511.614 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:51.639Z,1427840511.639 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:51.645Z,1427840511.645 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:52.023Z,1427840512.023 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:52.029Z,1427840512.029 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:52.029Z,1427840512.029 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:52.057Z,1427840512.057 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:52.064Z,1427840512.064 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:52.346Z,1427840512.346 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:52.348Z,1427840512.348 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:52.349Z,1427840512.349 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:52.361Z,1427840512.361 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:52.362Z,1427840512.362 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:52.873Z,1427840512.873 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:52.874Z,1427840512.874 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:21:52.882Z,1427840512.882 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:52.884Z,1427840512.884 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:53.156Z,1427840513.156 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:53.158Z,1427840513.158 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:53.158Z,1427840513.158 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:53.171Z,1427840513.171 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:53.173Z,1427840513.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:53.691Z,1427840513.691 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:53.694Z,1427840513.694 [Rowe_600](DEBUG): 3616 bytes available, but need 4084
2015-03-31T22:21:53.738Z,1427840513.738 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:53.739Z,1427840513.739 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:54.087Z,1427840514.087 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:54.096Z,1427840514.096 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:54.097Z,1427840514.097 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:54.142Z,1427840514.142 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:54.148Z,1427840514.148 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:54.480Z,1427840514.480 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:54.498Z,1427840514.498 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:54.499Z,1427840514.499 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:54.527Z,1427840514.527 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:54.533Z,1427840514.533 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:54.900Z,1427840514.900 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:54.914Z,1427840514.914 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:54.914Z,1427840514.914 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:54.949Z,1427840514.949 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:54.956Z,1427840514.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:55.291Z,1427840515.291 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:55.298Z,1427840515.298 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:55.298Z,1427840515.298 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:55.323Z,1427840515.323 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:55.325Z,1427840515.325 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:55.707Z,1427840515.707 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:55.723Z,1427840515.723 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:55.723Z,1427840515.723 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:55.752Z,1427840515.752 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:55.758Z,1427840515.758 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:55.953Z,1427840515.953 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:55.955Z,1427840515.955 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:55.955Z,1427840515.955 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:55.968Z,1427840515.968 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:55.970Z,1427840515.970 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:56.473Z,1427840516.473 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:56.476Z,1427840516.476 [Rowe_600](DEBUG): 2830 bytes available, but need 4084
2015-03-31T22:21:56.517Z,1427840516.517 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:56.529Z,1427840516.529 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:56.752Z,1427840516.752 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:56.753Z,1427840516.753 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:56.754Z,1427840516.754 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:56.795Z,1427840516.795 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:56.801Z,1427840516.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:57.281Z,1427840517.281 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:57.284Z,1427840517.284 [Rowe_600](DEBUG): 2233 bytes available, but need 4084
2015-03-31T22:21:57.306Z,1427840517.306 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:57.343Z,1427840517.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:57.672Z,1427840517.672 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:57.694Z,1427840517.694 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:57.695Z,1427840517.695 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:57.911Z,1427840517.911 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:57.923Z,1427840517.923 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:58.232Z,1427840518.232 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:58.238Z,1427840518.238 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:58.239Z,1427840518.239 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:58.312Z,1427840518.312 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:58.329Z,1427840518.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:58.631Z,1427840518.631 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:58.633Z,1427840518.633 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:58.634Z,1427840518.634 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:58.744Z,1427840518.744 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:58.764Z,1427840518.764 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:59.038Z,1427840519.038 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:59.045Z,1427840519.045 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:59.045Z,1427840519.045 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:59.107Z,1427840519.107 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:59.114Z,1427840519.114 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:59.448Z,1427840519.448 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:59.451Z,1427840519.451 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:59.451Z,1427840519.451 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:59.503Z,1427840519.503 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:59.505Z,1427840519.505 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:21:59.769Z,1427840519.769 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:21:59.771Z,1427840519.771 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:21:59.771Z,1427840519.771 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:21:59.816Z,1427840519.816 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:21:59.822Z,1427840519.822 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:00.287Z,1427840520.287 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:00.290Z,1427840520.290 [Rowe_600](DEBUG): 4033 bytes available, but need 4084
2015-03-31T22:22:00.297Z,1427840520.297 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:00.299Z,1427840520.299 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:00.568Z,1427840520.568 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:00.571Z,1427840520.571 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:00.571Z,1427840520.571 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:00.588Z,1427840520.588 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:00.590Z,1427840520.590 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:01.080Z,1427840521.080 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:01.087Z,1427840521.087 [Rowe_600](DEBUG): 3289 bytes available, but need 4084
2015-03-31T22:22:01.123Z,1427840521.123 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:01.138Z,1427840521.138 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:01.507Z,1427840521.507 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:01.515Z,1427840521.515 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d6494]
2015-03-31T22:22:01.517Z,1427840521.517 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64e4]
2015-03-31T22:22:01.565Z,1427840521.565 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:01.568Z,1427840521.568 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:01.915Z,1427840521.915 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:01.928Z,1427840521.928 [Rowe_600](DEBUG): 3997 bytes available, but need 4084
2015-03-31T22:22:01.938Z,1427840521.938 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:01.944Z,1427840521.944 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:02.334Z,1427840522.334 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:02.340Z,1427840522.340 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:02.340Z,1427840522.340 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:02.398Z,1427840522.398 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:02.413Z,1427840522.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:02.728Z,1427840522.728 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:02.734Z,1427840522.734 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:02.734Z,1427840522.734 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:02.763Z,1427840522.763 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:02.765Z,1427840522.765 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:03.136Z,1427840523.136 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:03.144Z,1427840523.144 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:03.145Z,1427840523.145 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:03.174Z,1427840523.174 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:03.176Z,1427840523.176 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:03.400Z,1427840523.400 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:03.402Z,1427840523.402 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:03.402Z,1427840523.402 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:03.415Z,1427840523.415 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:03.416Z,1427840523.416 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:03.915Z,1427840523.915 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:03.918Z,1427840523.918 [Rowe_600](DEBUG): 3086 bytes available, but need 4084
2015-03-31T22:22:03.940Z,1427840523.940 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:03.968Z,1427840523.968 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:04.191Z,1427840524.191 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:04.193Z,1427840524.193 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:04.193Z,1427840524.193 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:04.222Z,1427840524.222 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:04.228Z,1427840524.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:04.742Z,1427840524.742 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:04.745Z,1427840524.745 [Rowe_600](DEBUG): 2709 bytes available, but need 4084
2015-03-31T22:22:04.783Z,1427840524.783 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:04.799Z,1427840524.799 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:05.110Z,1427840525.110 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:05.134Z,1427840525.134 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:05.136Z,1427840525.136 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:05.257Z,1427840525.257 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:05.259Z,1427840525.259 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:05.538Z,1427840525.538 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:05.555Z,1427840525.555 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:05.557Z,1427840525.557 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:05.686Z,1427840525.686 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:05.694Z,1427840525.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:06.036Z,1427840526.036 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:06.042Z,1427840526.042 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:06.042Z,1427840526.042 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:06.087Z,1427840526.087 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:06.103Z,1427840526.103 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:06.421Z,1427840526.421 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:06.428Z,1427840526.428 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:06.428Z,1427840526.428 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:06.459Z,1427840526.459 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:06.461Z,1427840526.461 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:06.825Z,1427840526.825 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:06.847Z,1427840526.847 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:06.848Z,1427840526.848 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:06.880Z,1427840526.880 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:06.882Z,1427840526.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:07.085Z,1427840527.085 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:07.088Z,1427840527.088 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:07.088Z,1427840527.088 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:07.101Z,1427840527.101 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:07.102Z,1427840527.102 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:07.642Z,1427840527.642 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:07.645Z,1427840527.645 [Rowe_600](DEBUG): 3282 bytes available, but need 4084
2015-03-31T22:22:07.670Z,1427840527.670 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:07.699Z,1427840527.699 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:07.891Z,1427840527.891 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:07.893Z,1427840527.893 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:07.893Z,1427840527.893 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:07.906Z,1427840527.906 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:07.908Z,1427840527.908 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:08.429Z,1427840528.429 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:08.431Z,1427840528.431 [Rowe_600](DEBUG): 2436 bytes available, but need 4084
2015-03-31T22:22:08.478Z,1427840528.478 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:08.496Z,1427840528.496 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:08.830Z,1427840528.830 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:08.843Z,1427840528.843 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:08.844Z,1427840528.844 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:08.963Z,1427840528.963 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:08.965Z,1427840528.965 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:09.249Z,1427840529.249 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:09.288Z,1427840529.288 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:09.289Z,1427840529.289 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:09.371Z,1427840529.371 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:09.373Z,1427840529.373 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:09.685Z,1427840529.685 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:09.705Z,1427840529.705 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:09.706Z,1427840529.706 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:09.777Z,1427840529.777 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:09.784Z,1427840529.784 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:10.133Z,1427840530.133 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:10.135Z,1427840530.135 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:10.135Z,1427840530.135 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:10.165Z,1427840530.165 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:10.166Z,1427840530.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:10.546Z,1427840530.546 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:10.563Z,1427840530.563 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:10.563Z,1427840530.563 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:10.589Z,1427840530.589 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:10.591Z,1427840530.591 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:10.786Z,1427840530.786 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:10.788Z,1427840530.788 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:10.788Z,1427840530.788 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:10.831Z,1427840530.831 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:10.833Z,1427840530.833 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:11.333Z,1427840531.333 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:11.340Z,1427840531.340 [Rowe_600](DEBUG): 3116 bytes available, but need 4084
2015-03-31T22:22:11.384Z,1427840531.384 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:11.401Z,1427840531.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:11.604Z,1427840531.604 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:11.606Z,1427840531.606 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:11.606Z,1427840531.606 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:11.619Z,1427840531.619 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:11.621Z,1427840531.621 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:12.128Z,1427840532.128 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:12.130Z,1427840532.130 [Rowe_600](DEBUG): 2303 bytes available, but need 4084
2015-03-31T22:22:12.307Z,1427840532.307 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:12.309Z,1427840532.309 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:12.598Z,1427840532.598 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:12.614Z,1427840532.614 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:12.615Z,1427840532.615 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:12.686Z,1427840532.686 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:12.692Z,1427840532.692 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:12.991Z,1427840532.991 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:13.014Z,1427840533.014 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:13.015Z,1427840533.015 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:13.130Z,1427840533.130 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:13.147Z,1427840533.147 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:13.465Z,1427840533.465 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:13.467Z,1427840533.467 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:13.467Z,1427840533.467 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:13.513Z,1427840533.513 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:13.528Z,1427840533.528 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:13.843Z,1427840533.843 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:13.845Z,1427840533.845 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:13.845Z,1427840533.845 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:13.894Z,1427840533.894 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:13.895Z,1427840533.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:14.273Z,1427840534.273 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:14.279Z,1427840534.279 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:14.280Z,1427840534.280 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:14.326Z,1427840534.326 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:14.332Z,1427840534.332 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:14.535Z,1427840534.535 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:14.537Z,1427840534.537 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:14.537Z,1427840534.537 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:14.568Z,1427840534.568 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:14.570Z,1427840534.570 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:15.065Z,1427840535.065 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:15.069Z,1427840535.069 [Rowe_600](DEBUG): 3329 bytes available, but need 4084
2015-03-31T22:22:15.128Z,1427840535.128 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:15.137Z,1427840535.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:15.316Z,1427840535.316 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:15.318Z,1427840535.318 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:15.319Z,1427840535.319 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:15.332Z,1427840535.332 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:15.334Z,1427840535.334 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:15.868Z,1427840535.868 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:15.870Z,1427840535.870 [Rowe_600](DEBUG): 2656 bytes available, but need 4084
2015-03-31T22:22:15.901Z,1427840535.901 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:15.926Z,1427840535.926 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:16.249Z,1427840536.249 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:16.270Z,1427840536.270 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:16.271Z,1427840536.271 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:16.385Z,1427840536.385 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:16.391Z,1427840536.391 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:16.722Z,1427840536.722 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:16.744Z,1427840536.744 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:16.745Z,1427840536.745 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:16.798Z,1427840536.798 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:16.806Z,1427840536.806 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:17.159Z,1427840537.159 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:17.161Z,1427840537.161 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:17.162Z,1427840537.162 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:17.223Z,1427840537.223 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:17.231Z,1427840537.231 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:17.552Z,1427840537.552 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:17.555Z,1427840537.555 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:17.555Z,1427840537.555 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:17.579Z,1427840537.579 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:17.585Z,1427840537.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:17.969Z,1427840537.969 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:17.985Z,1427840537.985 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:17.985Z,1427840537.985 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:18.010Z,1427840538.010 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:18.011Z,1427840538.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:18.215Z,1427840538.215 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:18.229Z,1427840538.229 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:18.230Z,1427840538.230 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:18.267Z,1427840538.267 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:18.269Z,1427840538.269 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:18.760Z,1427840538.760 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:18.767Z,1427840538.767 [Rowe_600](DEBUG): 3200 bytes available, but need 4084
2015-03-31T22:22:18.814Z,1427840538.814 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:18.831Z,1427840538.831 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:19.021Z,1427840539.021 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:19.023Z,1427840539.023 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:19.023Z,1427840539.023 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:19.036Z,1427840539.036 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:19.037Z,1427840539.037 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:19.561Z,1427840539.561 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:19.588Z,1427840539.588 [Rowe_600](DEBUG): 2460 bytes available, but need 4084
2015-03-31T22:22:19.611Z,1427840539.611 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:19.618Z,1427840539.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:19.971Z,1427840539.971 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:19.988Z,1427840539.988 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:19.989Z,1427840539.989 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:20.097Z,1427840540.097 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:20.099Z,1427840540.099 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:20.367Z,1427840540.367 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:20.389Z,1427840540.389 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:20.390Z,1427840540.390 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:20.492Z,1427840540.492 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:20.498Z,1427840540.498 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:20.870Z,1427840540.870 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:20.872Z,1427840540.872 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:20.872Z,1427840540.872 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:20.925Z,1427840540.925 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:20.933Z,1427840540.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:21.275Z,1427840541.275 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:21.277Z,1427840541.277 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:21.281Z,1427840541.281 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:21.304Z,1427840541.304 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:21.310Z,1427840541.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:21.662Z,1427840541.662 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:21.680Z,1427840541.680 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:21.681Z,1427840541.681 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:21.718Z,1427840541.718 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:21.720Z,1427840541.720 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:21.935Z,1427840541.935 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:21.937Z,1427840541.937 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:21.937Z,1427840541.937 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:21.949Z,1427840541.949 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:21.951Z,1427840541.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:22.502Z,1427840542.502 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:22.505Z,1427840542.505 [Rowe_600](DEBUG): 3528 bytes available, but need 4084
2015-03-31T22:22:22.527Z,1427840542.527 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:22.555Z,1427840542.555 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:22.732Z,1427840542.732 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:22.734Z,1427840542.734 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:22.734Z,1427840542.734 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:22.771Z,1427840542.771 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:22.777Z,1427840542.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:23.270Z,1427840543.270 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:23.273Z,1427840543.273 [Rowe_600](DEBUG): 2456 bytes available, but need 4084
2015-03-31T22:22:23.296Z,1427840543.296 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:23.319Z,1427840543.319 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:23.670Z,1427840543.670 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:23.687Z,1427840543.687 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:23.688Z,1427840543.688 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:23.806Z,1427840543.806 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:23.807Z,1427840543.807 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:24.079Z,1427840544.079 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:24.096Z,1427840544.096 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:24.097Z,1427840544.097 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:24.199Z,1427840544.199 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:24.201Z,1427840544.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:24.492Z,1427840544.492 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:24.510Z,1427840544.510 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:24.511Z,1427840544.511 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:24.610Z,1427840544.610 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:24.612Z,1427840544.612 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:24.975Z,1427840544.975 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:24.981Z,1427840544.981 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:24.981Z,1427840544.981 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:25.006Z,1427840545.006 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:25.012Z,1427840545.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:25.318Z,1427840545.318 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:25.340Z,1427840545.340 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:25.341Z,1427840545.341 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:25.411Z,1427840545.411 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:25.413Z,1427840545.413 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:25.603Z,1427840545.603 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:25.605Z,1427840545.605 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:25.605Z,1427840545.605 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:25.618Z,1427840545.618 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:25.620Z,1427840545.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:26.117Z,1427840546.117 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:26.124Z,1427840546.124 [Rowe_600](DEBUG): 2466 bytes available, but need 4084
2015-03-31T22:22:26.265Z,1427840546.265 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:26.267Z,1427840546.267 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:26.404Z,1427840546.404 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:26.406Z,1427840546.406 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:26.406Z,1427840546.406 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:26.457Z,1427840546.457 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:26.459Z,1427840546.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:26.907Z,1427840546.907 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:26.910Z,1427840546.910 [Rowe_600](DEBUG): 1614 bytes available, but need 4084
2015-03-31T22:22:26.930Z,1427840546.930 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:26.962Z,1427840546.962 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:27.354Z,1427840547.354 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:27.363Z,1427840547.363 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:27.364Z,1427840547.364 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:27.500Z,1427840547.500 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:27.510Z,1427840547.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:27.798Z,1427840547.798 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:27.815Z,1427840547.815 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:27.820Z,1427840547.820 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:27.931Z,1427840547.931 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:27.933Z,1427840547.933 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:28.250Z,1427840548.250 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:28.268Z,1427840548.268 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:28.271Z,1427840548.271 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:28.311Z,1427840548.311 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:28.317Z,1427840548.317 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:28.682Z,1427840548.682 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:28.684Z,1427840548.684 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:28.684Z,1427840548.684 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:28.733Z,1427840548.733 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:28.743Z,1427840548.743 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:29.061Z,1427840549.061 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:29.086Z,1427840549.086 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:29.088Z,1427840549.088 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:29.157Z,1427840549.157 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:29.163Z,1427840549.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:29.304Z,1427840549.304 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:29.306Z,1427840549.306 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:29.307Z,1427840549.307 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:29.319Z,1427840549.319 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:29.321Z,1427840549.321 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:29.851Z,1427840549.851 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:29.854Z,1427840549.854 [Rowe_600](DEBUG): 2699 bytes available, but need 4084
2015-03-31T22:22:29.876Z,1427840549.876 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:29.910Z,1427840549.910 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:30.113Z,1427840550.113 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:30.115Z,1427840550.115 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:30.115Z,1427840550.115 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:30.128Z,1427840550.128 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:30.130Z,1427840550.130 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:30.600Z,1427840550.600 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:30.602Z,1427840550.602 [Rowe_600](DEBUG): 1407 bytes available, but need 4084
2015-03-31T22:22:30.643Z,1427840550.643 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:30.663Z,1427840550.663 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:31.016Z,1427840551.016 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:31.025Z,1427840551.025 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:31.026Z,1427840551.026 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:31.158Z,1427840551.158 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:31.173Z,1427840551.173 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:31.494Z,1427840551.494 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:31.512Z,1427840551.512 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:31.513Z,1427840551.513 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:31.625Z,1427840551.625 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:31.626Z,1427840551.626 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:31.874Z,1427840551.874 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:31.895Z,1427840551.895 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:31.896Z,1427840551.896 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:32.001Z,1427840552.001 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:32.007Z,1427840552.007 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:32.309Z,1427840552.309 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:32.333Z,1427840552.333 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:32.334Z,1427840552.334 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:32.405Z,1427840552.405 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:32.411Z,1427840552.411 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:32.692Z,1427840552.692 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:32.710Z,1427840552.710 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:32.711Z,1427840552.711 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:32.835Z,1427840552.835 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:32.837Z,1427840552.837 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:32.940Z,1427840552.940 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:32.942Z,1427840552.942 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:32.942Z,1427840552.942 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:32.977Z,1427840552.977 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:32.979Z,1427840552.979 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:33.324Z,1427840553.324 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:33.360Z,1427840553.360 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:33.379Z,1427840553.379 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:33.745Z,1427840553.745 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:33.746Z,1427840553.746 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:22:33.755Z,1427840553.755 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:33.761Z,1427840553.761 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:34.113Z,1427840554.113 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:34.115Z,1427840554.115 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:34.115Z,1427840554.115 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:34.161Z,1427840554.161 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:34.163Z,1427840554.163 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:34.569Z,1427840554.569 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:34.570Z,1427840554.570 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:22:34.598Z,1427840554.598 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:34.615Z,1427840554.615 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:34.957Z,1427840554.957 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:34.963Z,1427840554.963 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:34.963Z,1427840554.963 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:35.096Z,1427840555.096 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:35.121Z,1427840555.121 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:35.378Z,1427840555.378 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:35.400Z,1427840555.400 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:35.401Z,1427840555.401 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:35.505Z,1427840555.505 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:35.512Z,1427840555.512 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:35.831Z,1427840555.831 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:35.854Z,1427840555.854 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:35.855Z,1427840555.855 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:35.987Z,1427840555.987 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:36.008Z,1427840556.008 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:36.173Z,1427840556.173 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:36.175Z,1427840556.175 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:36.175Z,1427840556.175 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:36.294Z,1427840556.294 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:36.310Z,1427840556.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:36.570Z,1427840556.570 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:36.572Z,1427840556.572 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:36.573Z,1427840556.573 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:36.613Z,1427840556.613 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:36.614Z,1427840556.614 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:36.966Z,1427840556.966 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:36.968Z,1427840556.968 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:36.969Z,1427840556.969 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:36.997Z,1427840556.997 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:36.000Z,1427840557.000 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:37.413Z,1427840557.413 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:37.413Z,1427840557.413 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:22:37.431Z,1427840557.431 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:37.433Z,1427840557.433 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:37.747Z,1427840557.747 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:37.749Z,1427840557.749 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:37.749Z,1427840557.749 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:37.762Z,1427840557.762 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:37.763Z,1427840557.763 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:38.258Z,1427840558.258 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:38.259Z,1427840558.259 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:22:38.264Z,1427840558.264 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:38.266Z,1427840558.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:38.647Z,1427840558.647 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:38.654Z,1427840558.654 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:38.654Z,1427840558.654 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:38.702Z,1427840558.702 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:38.718Z,1427840558.718 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:39.051Z,1427840559.051 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:39.058Z,1427840559.058 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:39.059Z,1427840559.059 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:39.154Z,1427840559.154 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:39.170Z,1427840559.170 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:39.445Z,1427840559.445 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:39.451Z,1427840559.451 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:39.451Z,1427840559.451 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:39.552Z,1427840559.552 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:39.569Z,1427840559.569 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:39.829Z,1427840559.829 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:39.835Z,1427840559.835 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:39.836Z,1427840559.836 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:39.861Z,1427840559.861 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:39.867Z,1427840559.867 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:40.256Z,1427840560.256 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:40.258Z,1427840560.258 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:40.258Z,1427840560.258 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:40.283Z,1427840560.283 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:40.285Z,1427840560.285 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:40.577Z,1427840560.577 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:40.579Z,1427840560.579 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:40.579Z,1427840560.579 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:40.592Z,1427840560.592 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:40.594Z,1427840560.594 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:41.102Z,1427840561.102 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:41.103Z,1427840561.103 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:22:41.164Z,1427840561.164 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:41.166Z,1427840561.166 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:41.363Z,1427840561.363 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:41.366Z,1427840561.366 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:41.366Z,1427840561.366 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:41.395Z,1427840561.395 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:41.401Z,1427840561.401 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:41.932Z,1427840561.932 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:41.939Z,1427840561.939 [Rowe_600](DEBUG): 3807 bytes available, but need 4084
2015-03-31T22:22:41.974Z,1427840561.974 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:41.976Z,1427840561.976 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:42.289Z,1427840562.289 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:42.311Z,1427840562.311 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:42.312Z,1427840562.312 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:42.379Z,1427840562.379 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:42.381Z,1427840562.381 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:42.752Z,1427840562.752 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:42.754Z,1427840562.754 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:42.759Z,1427840562.759 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:42.818Z,1427840562.818 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:42.841Z,1427840562.841 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:43.139Z,1427840563.139 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:43.142Z,1427840563.142 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:43.142Z,1427840563.142 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:43.230Z,1427840563.230 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:43.250Z,1427840563.250 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:43.542Z,1427840563.542 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:43.549Z,1427840563.549 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:43.549Z,1427840563.549 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:43.574Z,1427840563.574 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:43.576Z,1427840563.576 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:43.962Z,1427840563.962 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:43.964Z,1427840563.964 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:43.977Z,1427840563.977 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:44.004Z,1427840564.004 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:44.006Z,1427840564.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:44.245Z,1427840564.245 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:44.247Z,1427840564.247 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:44.247Z,1427840564.247 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:44.260Z,1427840564.260 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:44.278Z,1427840564.278 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:44.787Z,1427840564.787 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:44.794Z,1427840564.794 [Rowe_600](DEBUG): 3811 bytes available, but need 4084
2015-03-31T22:22:44.819Z,1427840564.819 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:44.821Z,1427840564.821 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:45.051Z,1427840565.051 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:45.053Z,1427840565.053 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:45.053Z,1427840565.053 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:45.065Z,1427840565.065 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:45.067Z,1427840565.067 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:45.567Z,1427840565.567 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:45.570Z,1427840565.570 [Rowe_600](DEBUG): 2888 bytes available, but need 4084
2015-03-31T22:22:45.608Z,1427840565.608 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:45.620Z,1427840565.620 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:45.971Z,1427840565.971 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:45.981Z,1427840565.981 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:45.982Z,1427840565.982 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:46.074Z,1427840566.074 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:46.080Z,1427840566.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:46.457Z,1427840566.457 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:46.460Z,1427840566.460 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:46.460Z,1427840566.460 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:46.482Z,1427840566.482 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:46.490Z,1427840566.490 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:46.834Z,1427840566.834 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:46.843Z,1427840566.843 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:46.843Z,1427840566.843 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:46.868Z,1427840566.868 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:46.882Z,1427840566.882 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:47.223Z,1427840567.223 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:47.231Z,1427840567.231 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:47.232Z,1427840567.232 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:47.275Z,1427840567.275 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:47.283Z,1427840567.283 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:47.642Z,1427840567.642 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:47.661Z,1427840567.661 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:47.662Z,1427840567.662 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:47.692Z,1427840567.692 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:47.694Z,1427840567.694 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:47.890Z,1427840567.890 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:47.892Z,1427840567.892 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:47.892Z,1427840567.892 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:47.905Z,1427840567.905 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:47.906Z,1427840567.906 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:48.382Z,1427840568.382 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:48.389Z,1427840568.389 [Rowe_600](DEBUG): 2534 bytes available, but need 4084
2015-03-31T22:22:48.429Z,1427840568.429 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:48.446Z,1427840568.446 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:48.671Z,1427840568.671 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:48.673Z,1427840568.673 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:48.673Z,1427840568.673 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:48.685Z,1427840568.685 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:48.687Z,1427840568.687 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:49.210Z,1427840569.210 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:49.222Z,1427840569.222 [Rowe_600](DEBUG): 2115 bytes available, but need 4084
2015-03-31T22:22:49.263Z,1427840569.263 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:49.289Z,1427840569.289 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:49.617Z,1427840569.617 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:49.638Z,1427840569.638 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:49.639Z,1427840569.639 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:49.767Z,1427840569.767 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:49.774Z,1427840569.774 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:50.103Z,1427840570.103 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:50.122Z,1427840570.122 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:50.127Z,1427840570.127 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:50.177Z,1427840570.177 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:50.183Z,1427840570.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:50.495Z,1427840570.495 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:50.513Z,1427840570.513 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:50.514Z,1427840570.514 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:50.572Z,1427840570.572 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:50.574Z,1427840570.574 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:50.892Z,1427840570.892 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:50.909Z,1427840570.909 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:50.910Z,1427840570.910 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:50.962Z,1427840570.962 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:50.969Z,1427840570.969 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:51.291Z,1427840571.291 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:51.322Z,1427840571.322 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:51.323Z,1427840571.323 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:51.393Z,1427840571.393 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:51.395Z,1427840571.395 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:51.618Z,1427840571.618 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:51.627Z,1427840571.627 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:51.628Z,1427840571.628 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:51.746Z,1427840571.746 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:51.753Z,1427840571.753 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:51.965Z,1427840571.965 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:51.967Z,1427840571.967 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:51.968Z,1427840571.968 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:51.993Z,1427840571.993 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:51.999Z,1427840571.999 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:52.342Z,1427840572.342 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:52.363Z,1427840572.363 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:52.365Z,1427840572.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:52.781Z,1427840572.781 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:52.781Z,1427840572.781 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:22:52.787Z,1427840572.787 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:52.788Z,1427840572.788 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:53.216Z,1427840573.216 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:53.225Z,1427840573.225 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:53.226Z,1427840573.226 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:53.365Z,1427840573.365 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:53.382Z,1427840573.382 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:53.719Z,1427840573.719 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:53.746Z,1427840573.746 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:53.747Z,1427840573.747 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:53.866Z,1427840573.866 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:53.889Z,1427840573.889 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:54.187Z,1427840574.187 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:54.213Z,1427840574.213 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:54.215Z,1427840574.215 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:54.323Z,1427840574.323 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:54.329Z,1427840574.329 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:54.515Z,1427840574.515 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:54.530Z,1427840574.530 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:54.531Z,1427840574.531 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:54.655Z,1427840574.655 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:54.670Z,1427840574.670 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:54.802Z,1427840574.802 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:54.804Z,1427840574.804 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:54.804Z,1427840574.804 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:54.862Z,1427840574.862 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:54.863Z,1427840574.863 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:55.213Z,1427840575.213 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:55.215Z,1427840575.215 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:55.216Z,1427840575.216 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:55.290Z,1427840575.290 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:55.315Z,1427840575.315 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:55.669Z,1427840575.669 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:55.669Z,1427840575.669 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:22:55.675Z,1427840575.675 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:55.677Z,1427840575.677 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:55.995Z,1427840575.995 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:55.997Z,1427840575.997 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:55.997Z,1427840575.997 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:56.053Z,1427840576.053 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:56.056Z,1427840576.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:56.493Z,1427840576.493 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:56.493Z,1427840576.493 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:22:56.498Z,1427840576.498 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:56.500Z,1427840576.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:56.882Z,1427840576.882 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:56.884Z,1427840576.884 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:56.884Z,1427840576.884 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:56.989Z,1427840576.989 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:57.014Z,1427840577.014 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:57.332Z,1427840577.332 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:57.354Z,1427840577.354 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:57.355Z,1427840577.355 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:57.523Z,1427840577.523 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:57.539Z,1427840577.539 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:57.842Z,1427840577.842 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:57.864Z,1427840577.864 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:57.865Z,1427840577.865 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:57.996Z,1427840577.996 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:58.011Z,1427840578.011 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:58.103Z,1427840578.103 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:58.108Z,1427840578.108 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:58.109Z,1427840578.109 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:58.238Z,1427840578.238 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:58.254Z,1427840578.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:58.508Z,1427840578.508 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:58.510Z,1427840578.510 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:58.510Z,1427840578.510 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:58.547Z,1427840578.547 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:58.549Z,1427840578.549 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:58.907Z,1427840578.907 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:58.909Z,1427840578.909 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:58.909Z,1427840578.909 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:58.922Z,1427840578.922 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:58.924Z,1427840578.924 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:59.341Z,1427840579.341 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:59.342Z,1427840579.342 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:22:59.347Z,1427840579.347 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:59.349Z,1427840579.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:22:59.708Z,1427840579.708 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:22:59.710Z,1427840579.710 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:22:59.710Z,1427840579.710 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:22:59.723Z,1427840579.723 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:22:59.724Z,1427840579.724 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:00.187Z,1427840580.187 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:00.187Z,1427840580.187 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:23:00.192Z,1427840580.192 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:00.194Z,1427840580.194 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:00.580Z,1427840580.580 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:00.582Z,1427840580.582 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:00.582Z,1427840580.582 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:00.609Z,1427840580.609 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:00.622Z,1427840580.622 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:00.975Z,1427840580.975 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:00.977Z,1427840580.977 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:00.977Z,1427840580.977 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:01.068Z,1427840581.068 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:01.089Z,1427840581.089 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:01.378Z,1427840581.378 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:01.386Z,1427840581.386 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:01.387Z,1427840581.387 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:01.506Z,1427840581.506 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:01.521Z,1427840581.521 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:01.769Z,1427840581.769 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:01.772Z,1427840581.772 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:01.772Z,1427840581.772 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:01.801Z,1427840581.801 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:01.803Z,1427840581.803 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:02.200Z,1427840582.200 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:02.214Z,1427840582.214 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:02.215Z,1427840582.215 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:02.227Z,1427840582.227 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:02.228Z,1427840582.228 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:02.534Z,1427840582.534 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:02.536Z,1427840582.536 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:02.536Z,1427840582.536 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:02.579Z,1427840582.579 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:02.581Z,1427840582.581 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:03.036Z,1427840583.036 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:03.036Z,1427840583.036 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:23:03.042Z,1427840583.042 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:03.043Z,1427840583.043 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:03.318Z,1427840583.318 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:03.320Z,1427840583.320 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:03.321Z,1427840583.321 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:03.357Z,1427840583.357 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:03.359Z,1427840583.359 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:03.860Z,1427840583.860 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:03.863Z,1427840583.863 [Rowe_600](DEBUG): 3737 bytes available, but need 4084
2015-03-31T22:23:03.894Z,1427840583.894 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:03.900Z,1427840583.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:04.262Z,1427840584.262 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:04.270Z,1427840584.270 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:04.272Z,1427840584.272 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:04.308Z,1427840584.308 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:04.310Z,1427840584.310 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:04.676Z,1427840584.676 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:04.683Z,1427840584.683 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:04.683Z,1427840584.683 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:04.702Z,1427840584.702 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:04.712Z,1427840584.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:05.079Z,1427840585.079 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:05.081Z,1427840585.081 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:05.081Z,1427840585.081 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:05.167Z,1427840585.167 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:05.183Z,1427840585.183 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:05.470Z,1427840585.470 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:05.472Z,1427840585.472 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:05.473Z,1427840585.473 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:05.498Z,1427840585.498 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:05.500Z,1427840585.500 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:05.892Z,1427840585.892 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:05.894Z,1427840585.894 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:05.899Z,1427840585.899 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:05.920Z,1427840585.920 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:05.921Z,1427840585.921 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:06.164Z,1427840586.164 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:06.166Z,1427840586.166 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:06.166Z,1427840586.166 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:06.199Z,1427840586.199 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:06.201Z,1427840586.201 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:06.702Z,1427840586.702 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:06.717Z,1427840586.717 [Rowe_600](DEBUG): 3645 bytes available, but need 4084
2015-03-31T22:23:06.744Z,1427840586.744 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:06.750Z,1427840586.750 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:06.952Z,1427840586.952 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:06.954Z,1427840586.954 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:06.955Z,1427840586.955 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:06.988Z,1427840586.988 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:06.990Z,1427840586.990 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:07.524Z,1427840587.524 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:07.531Z,1427840587.531 [Rowe_600](DEBUG): 3255 bytes available, but need 4084
2015-03-31T22:23:07.576Z,1427840587.576 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:07.592Z,1427840587.592 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:07.896Z,1427840587.896 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:07.935Z,1427840587.935 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:07.936Z,1427840587.936 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:08.003Z,1427840588.003 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:08.005Z,1427840588.005 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:08.374Z,1427840588.374 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:08.381Z,1427840588.381 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:08.381Z,1427840588.381 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:08.406Z,1427840588.406 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:08.412Z,1427840588.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:08.775Z,1427840588.775 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:08.781Z,1427840588.781 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:08.781Z,1427840588.781 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:08.830Z,1427840588.830 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:08.842Z,1427840588.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:09.159Z,1427840589.159 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:09.162Z,1427840589.162 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:09.162Z,1427840589.162 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:09.187Z,1427840589.187 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:09.193Z,1427840589.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:09.523Z,1427840589.523 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:09.546Z,1427840589.546 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:09.547Z,1427840589.547 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:09.652Z,1427840589.652 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:09.658Z,1427840589.658 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:09.809Z,1427840589.809 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:09.811Z,1427840589.811 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:09.811Z,1427840589.811 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:09.837Z,1427840589.837 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:09.843Z,1427840589.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:10.360Z,1427840590.360 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:10.363Z,1427840590.363 [Rowe_600](DEBUG): 3041 bytes available, but need 4084
2015-03-31T22:23:10.428Z,1427840590.428 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:10.445Z,1427840590.445 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:10.606Z,1427840590.606 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:10.608Z,1427840590.608 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:10.609Z,1427840590.609 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:10.621Z,1427840590.621 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:10.623Z,1427840590.623 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:11.145Z,1427840591.145 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:11.148Z,1427840591.148 [Rowe_600](DEBUG): 2169 bytes available, but need 4084
2015-03-31T22:23:11.221Z,1427840591.221 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:11.234Z,1427840591.234 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:11.546Z,1427840591.546 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:11.555Z,1427840591.555 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:11.556Z,1427840591.556 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:11.706Z,1427840591.706 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:11.712Z,1427840591.712 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:11.997Z,1427840591.997 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:12.014Z,1427840592.014 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:12.015Z,1427840592.015 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:12.094Z,1427840592.094 [BPC1](DEBUG): Received data from all battery sticks
2015-03-31T22:23:12.110Z,1427840592.110 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:12.112Z,1427840592.112 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:12.445Z,1427840592.445 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:12.462Z,1427840592.462 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:12.463Z,1427840592.463 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:12.504Z,1427840592.504 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:12.510Z,1427840592.510 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:12.810Z,1427840592.810 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:12.828Z,1427840592.828 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:12.834Z,1427840592.834 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:12.892Z,1427840592.892 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:12.898Z,1427840592.898 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:13.280Z,1427840593.280 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:13.297Z,1427840593.297 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:13.302Z,1427840593.302 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:13.330Z,1427840593.330 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:13.340Z,1427840593.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:13.459Z,1427840593.459 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:13.461Z,1427840593.461 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:13.461Z,1427840593.461 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:13.486Z,1427840593.486 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:13.492Z,1427840593.492 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:13.993Z,1427840593.993 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:13.000Z,1427840594.000 [Rowe_600](DEBUG): 2147 bytes available, but need 4084
2015-03-31T22:23:14.041Z,1427840594.041 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:14.056Z,1427840594.056 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:14.266Z,1427840594.266 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:14.268Z,1427840594.268 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:14.268Z,1427840594.268 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:14.280Z,1427840594.280 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:14.282Z,1427840594.282 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:14.693Z,1427840594.693 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:14.696Z,1427840594.696 [Rowe_600](DEBUG): 297 bytes available, but need 4084
2015-03-31T22:23:14.752Z,1427840594.752 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:14.773Z,1427840594.773 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:15.069Z,1427840595.069 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:15.077Z,1427840595.077 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:15.078Z,1427840595.078 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:15.214Z,1427840595.214 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:15.225Z,1427840595.225 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:15.592Z,1427840595.592 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:15.622Z,1427840595.622 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:15.623Z,1427840595.623 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:15.751Z,1427840595.751 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:15.766Z,1427840595.766 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:15.982Z,1427840595.982 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:15.000Z,1427840596.000 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:16.001Z,1427840596.001 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:16.119Z,1427840596.119 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:16.136Z,1427840596.136 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:16.442Z,1427840596.442 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:16.464Z,1427840596.464 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:16.466Z,1427840596.466 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:16.570Z,1427840596.570 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:16.585Z,1427840596.585 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:16.788Z,1427840596.788 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:16.811Z,1427840596.811 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:16.812Z,1427840596.812 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:16.942Z,1427840596.942 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:16.958Z,1427840596.958 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:17.150Z,1427840597.150 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:17.152Z,1427840597.152 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:17.152Z,1427840597.152 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:17.173Z,1427840597.173 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:17.175Z,1427840597.175 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:17.507Z,1427840597.507 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:17.512Z,1427840597.512 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:17.514Z,1427840597.514 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:17.906Z,1427840597.906 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:17.907Z,1427840597.907 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:23:17.912Z,1427840597.912 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:17.938Z,1427840597.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:18.280Z,1427840598.280 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:18.283Z,1427840598.283 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:18.283Z,1427840598.283 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:18.296Z,1427840598.296 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:18.297Z,1427840598.297 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:18.741Z,1427840598.741 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:18.742Z,1427840598.742 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:23:18.755Z,1427840598.755 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:18.757Z,1427840598.757 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:19.129Z,1427840599.129 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:19.131Z,1427840599.131 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:19.141Z,1427840599.141 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:19.173Z,1427840599.173 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:19.193Z,1427840599.193 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:19.541Z,1427840599.541 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:19.548Z,1427840599.548 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:19.549Z,1427840599.549 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:19.675Z,1427840599.675 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:19.688Z,1427840599.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:19.926Z,1427840599.926 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:19.928Z,1427840599.928 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:19.935Z,1427840599.935 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:20.062Z,1427840600.062 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:20.083Z,1427840600.083 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:20.334Z,1427840600.334 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:20.336Z,1427840600.336 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:20.336Z,1427840600.336 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:20.361Z,1427840600.361 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:20.370Z,1427840600.370 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:20.746Z,1427840600.746 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:20.749Z,1427840600.749 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:20.749Z,1427840600.749 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:20.773Z,1427840600.773 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:20.779Z,1427840600.779 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:21.091Z,1427840601.091 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:21.091Z,1427840601.091 [Rowe_600](DEBUG): 3988 bytes available, but need 4084
2015-03-31T22:23:21.113Z,1427840601.113 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:21.119Z,1427840601.119 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:21.585Z,1427840601.585 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:21.587Z,1427840601.587 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d644c]
2015-03-31T22:23:21.588Z,1427840601.588 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d649c]
2015-03-31T22:23:21.616Z,1427840601.616 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:21.618Z,1427840601.618 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:21.880Z,1427840601.880 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:21.886Z,1427840601.886 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:21.887Z,1427840601.887 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:22.420Z,1427840602.420 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:22.433Z,1427840602.433 [Rowe_600](DEBUG): 3924 bytes available, but need 4084
2015-03-31T22:23:22.456Z,1427840602.456 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:22.459Z,1427840602.459 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:22.804Z,1427840602.804 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:22.828Z,1427840602.828 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:22.829Z,1427840602.829 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:22.850Z,1427840602.850 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:22.852Z,1427840602.852 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:23.220Z,1427840603.220 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:23.226Z,1427840603.226 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:23.226Z,1427840603.226 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:23.253Z,1427840603.253 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:23.275Z,1427840603.275 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:23.619Z,1427840603.619 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:23.622Z,1427840603.622 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:23.622Z,1427840603.622 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:23.831Z,1427840603.831 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:23.838Z,1427840603.838 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:24.048Z,1427840604.048 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:24.050Z,1427840604.050 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:24.050Z,1427840604.050 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:24.085Z,1427840604.085 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:24.097Z,1427840604.097 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:24.461Z,1427840604.461 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:24.468Z,1427840604.468 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:24.469Z,1427840604.469 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:24.515Z,1427840604.515 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:24.517Z,1427840604.517 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:24.824Z,1427840604.824 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:24.826Z,1427840604.826 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:24.826Z,1427840604.826 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:24.862Z,1427840604.862 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:24.864Z,1427840604.864 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:25.306Z,1427840605.306 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:25.306Z,1427840605.306 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:23:25.347Z,1427840605.347 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:25.348Z,1427840605.348 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:25.621Z,1427840605.621 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:25.623Z,1427840605.623 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:25.624Z,1427840605.624 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:25.709Z,1427840605.709 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:25.715Z,1427840605.715 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:26.179Z,1427840606.179 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:26.180Z,1427840606.180 [Rowe_600](DEBUG): 4063 bytes available, but need 4084
2015-03-31T22:23:26.239Z,1427840606.239 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:26.260Z,1427840606.260 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:26.809Z,1427840606.809 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:26.845Z,1427840606.845 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:26.846Z,1427840606.846 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:26.946Z,1427840606.946 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:26.952Z,1427840606.952 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:27.375Z,1427840607.375 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:27.397Z,1427840607.397 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:27.398Z,1427840607.398 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:27.581Z,1427840607.581 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:27.588Z,1427840607.588 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:27.782Z,1427840607.782 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:27.784Z,1427840607.784 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:27.790Z,1427840607.790 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:27.919Z,1427840607.919 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:27.942Z,1427840607.942 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:36.350Z,1427840616.349 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:36.388Z,1427840616.388 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:36.389Z,1427840616.389 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:36.461Z,1427840616.461 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:36.467Z,1427840616.467 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:36.585Z,1427840616.585 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:36.599Z,1427840616.599 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:36.600Z,1427840616.600 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:36.631Z,1427840616.631 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:36.632Z,1427840616.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:37.247Z,1427840617.247 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:37.292Z,1427840617.292 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:37.292Z,1427840617.292 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:37.606Z,1427840617.606 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:37.632Z,1427840617.632 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:38.076Z,1427840618.076 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:38.083Z,1427840618.083 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:38.084Z,1427840618.084 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:38.449Z,1427840618.449 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:38.463Z,1427840618.463 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:38.892Z,1427840618.892 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:38.903Z,1427840618.903 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:38.903Z,1427840618.903 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:38.998Z,1427840618.998 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:39.070Z,1427840619.070 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:39.408Z,1427840619.408 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:39.411Z,1427840619.411 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:39.419Z,1427840619.419 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:39.510Z,1427840619.510 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:39.525Z,1427840619.525 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:39.794Z,1427840619.794 [DataOverHttps](INFO): setting available, lastComms_.elapsed()=0.047275
2015-03-31T22:23:39.936Z,1427840619.936 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:39.938Z,1427840619.938 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:39.939Z,1427840619.939 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:39.984Z,1427840619.984 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:39.986Z,1427840619.986 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:40.162Z,1427840620.162 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:40.173Z,1427840620.173 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:40.173Z,1427840620.173 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:40.284Z,1427840620.284 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:40.286Z,1427840620.286 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:41.075Z,1427840621.075 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:41.122Z,1427840621.122 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:41.123Z,1427840621.123 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:41.324Z,1427840621.324 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:41.365Z,1427840621.365 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:42.268Z,1427840622.268 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:42.270Z,1427840622.270 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:42.270Z,1427840622.270 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:42.358Z,1427840622.358 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:42.372Z,1427840622.372 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:42.854Z,1427840622.854 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:42.864Z,1427840622.864 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:42.865Z,1427840622.865 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:42.915Z,1427840622.915 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:42.929Z,1427840622.929 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:43.181Z,1427840623.181 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:43.183Z,1427840623.183 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:43.184Z,1427840623.184 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:43.245Z,1427840623.245 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:43.247Z,1427840623.247 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:43.727Z,1427840623.727 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:43.752Z,1427840623.752 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:43.752Z,1427840623.752 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:43.814Z,1427840623.814 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:43.816Z,1427840623.816 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:44.135Z,1427840624.135 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:44.185Z,1427840624.185 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:44.199Z,1427840624.199 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:44.519Z,1427840624.519 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:44.566Z,1427840624.566 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:45.499Z,1427840625.499 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:45.538Z,1427840625.538 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:45.539Z,1427840625.539 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:45.733Z,1427840625.733 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:45.744Z,1427840625.744 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:46.098Z,1427840626.098 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:46.100Z,1427840626.100 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:46.100Z,1427840626.100 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:46.326Z,1427840626.326 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:46.343Z,1427840626.343 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:46.584Z,1427840626.584 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:46.594Z,1427840626.594 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:46.595Z,1427840626.595 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:46.628Z,1427840626.628 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:46.638Z,1427840626.638 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:46.955Z,1427840626.955 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:46.957Z,1427840626.957 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:46.958Z,1427840626.958 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:47.006Z,1427840627.006 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:47.018Z,1427840627.018 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:47.376Z,1427840627.376 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:47.378Z,1427840627.378 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:47.379Z,1427840627.379 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:47.431Z,1427840627.431 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:47.437Z,1427840627.437 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:47.882Z,1427840627.882 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:47.901Z,1427840627.901 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:47.902Z,1427840627.902 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:47.929Z,1427840627.929 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:47.931Z,1427840627.931 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:48.291Z,1427840628.291 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:48.297Z,1427840628.297 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:48.297Z,1427840628.297 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:48.324Z,1427840628.324 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:48.340Z,1427840628.340 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:48.690Z,1427840628.690 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:48.692Z,1427840628.692 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:48.692Z,1427840628.692 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:48.718Z,1427840628.718 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:48.735Z,1427840628.735 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:49.072Z,1427840629.072 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:49.079Z,1427840629.079 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:49.115Z,1427840629.115 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:49.135Z,1427840629.135 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:49.465Z,1427840629.465 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:49.472Z,1427840629.472 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:49.472Z,1427840629.472 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:49.497Z,1427840629.497 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:49.503Z,1427840629.503 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:49.891Z,1427840629.891 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:49.907Z,1427840629.907 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:49.911Z,1427840629.911 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:49.936Z,1427840629.936 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:49.938Z,1427840629.938 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:50.141Z,1427840630.141 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:50.143Z,1427840630.143 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:50.143Z,1427840630.143 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:50.156Z,1427840630.156 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:50.158Z,1427840630.158 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:50.687Z,1427840630.687 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:50.769Z,1427840630.769 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:50.771Z,1427840630.771 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:50.932Z,1427840630.932 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:50.936Z,1427840630.936 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:50.936Z,1427840630.936 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:50.949Z,1427840630.949 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:50.951Z,1427840630.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:51.505Z,1427840631.505 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:51.516Z,1427840631.516 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:51.517Z,1427840631.517 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:51.611Z,1427840631.611 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:51.613Z,1427840631.613 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:51.867Z,1427840631.867 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:51.885Z,1427840631.885 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:51.886Z,1427840631.886 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:52.004Z,1427840632.004 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:52.006Z,1427840632.006 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:52.302Z,1427840632.302 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:52.317Z,1427840632.317 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d5b87]
2015-03-31T22:23:52.318Z,1427840632.318 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d5bd7]
2015-03-31T22:23:52.404Z,1427840632.404 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:52.405Z,1427840632.405 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:52.732Z,1427840632.732 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:52.750Z,1427840632.750 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:52.751Z,1427840632.751 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:52.798Z,1427840632.798 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:52.804Z,1427840632.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:52.828Z,1427840632.828 [Default:CheckIn:Read_GPS](INFO): Timed out from 2015-03-31T22:18:52.5Z
2015-03-31T22:23:52.829Z,1427840632.829 [Default:CheckIn:Read_GPS] Stopped
2015-03-31T22:23:52.829Z,1427840632.829 [Default:CheckIn:Read_Iridium] Running Loop=1
2015-03-31T22:23:53.238Z,1427840633.238 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:53.274Z,1427840633.274 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:53.275Z,1427840633.275 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:53.645Z,1427840633.645 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:53.647Z,1427840633.647 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:53.663Z,1427840633.663 [Default:CheckIn:Read_Iridium](DEBUG): Initialize ReadDataComponent to sense platform_communications
2015-03-31T22:23:54.524Z,1427840634.524 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:54.527Z,1427840634.527 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:54.527Z,1427840634.527 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:54.540Z,1427840634.540 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:54.542Z,1427840634.542 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:54.655Z,1427840634.655 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:54.657Z,1427840634.657 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:54.657Z,1427840634.657 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:54.682Z,1427840634.682 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:54.688Z,1427840634.688 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:55.341Z,1427840635.341 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:55.343Z,1427840635.343 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:55.343Z,1427840635.343 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:55.422Z,1427840635.422 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:55.438Z,1427840635.438 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:55.729Z,1427840635.729 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:55.731Z,1427840635.731 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:55.732Z,1427840635.732 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:55.824Z,1427840635.824 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:55.840Z,1427840635.840 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:56.121Z,1427840636.121 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:56.123Z,1427840636.123 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:56.123Z,1427840636.123 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:56.238Z,1427840636.238 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:56.254Z,1427840636.254 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:56.512Z,1427840636.512 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:56.518Z,1427840636.518 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:56.518Z,1427840636.518 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:56.638Z,1427840636.638 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:56.649Z,1427840636.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:23:56.942Z,1427840636.942 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:23:56.944Z,1427840636.944 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:23:56.945Z,1427840636.945 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:23:57.021Z,1427840637.021 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:23:57.038Z,1427840637.038 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:03.942Z,1427840643.942 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:03.953Z,1427840643.953 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:03.954Z,1427840643.954 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:04.070Z,1427840644.070 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:04.087Z,1427840644.087 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:04.331Z,1427840644.331 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:04.333Z,1427840644.333 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:04.333Z,1427840644.333 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:04.362Z,1427840644.362 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:04.364Z,1427840644.364 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:04.749Z,1427840644.749 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:04.755Z,1427840644.755 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64a4]
2015-03-31T22:24:04.756Z,1427840644.756 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64f4]
2015-03-31T22:24:04.781Z,1427840644.781 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:04.791Z,1427840644.791 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:05.068Z,1427840645.068 [DataOverHttps](INFO): Sending 45 bytes from file Logs/20150331T184757/Courier0068.lzma
2015-03-31T22:24:05.115Z,1427840645.115 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:05.118Z,1427840645.118 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:05.118Z,1427840645.118 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:05.159Z,1427840645.159 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:05.161Z,1427840645.161 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:05.600Z,1427840645.600 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:05.602Z,1427840645.602 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:05.603Z,1427840645.603 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:05.616Z,1427840645.616 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:05.617Z,1427840645.617 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:05.899Z,1427840645.899 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:05.902Z,1427840645.902 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:05.902Z,1427840645.902 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:05.915Z,1427840645.915 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:05.917Z,1427840645.917 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:06.455Z,1427840646.455 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:06.462Z,1427840646.462 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:06.462Z,1427840646.462 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:06.506Z,1427840646.506 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:06.522Z,1427840646.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:07.068Z,1427840647.068 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:07.152Z,1427840647.152 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:07.153Z,1427840647.153 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:07.259Z,1427840647.259 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:07.261Z,1427840647.261 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:07.815Z,1427840647.815 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:07.850Z,1427840647.850 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:07.876Z,1427840647.876 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:08.023Z,1427840648.023 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:08.033Z,1427840648.033 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:08.468Z,1427840648.468 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:08.474Z,1427840648.474 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:08.474Z,1427840648.474 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:08.528Z,1427840648.528 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:08.534Z,1427840648.534 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:08.577Z,1427840648.577 [DataOverHttps](INFO): Moved sent file to Logs/20150331T184757/Courier0068.lzma.bak
2015-03-31T22:24:08.578Z,1427840648.578 [DataOverHttps](INFO): SBD MOMSN=3094245
2015-03-31T22:24:08.665Z,1427840648.665 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:08.667Z,1427840648.667 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:08.667Z,1427840648.667 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:08.732Z,1427840648.732 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:08.738Z,1427840648.738 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:09.319Z,1427840649.319 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:09.322Z,1427840649.322 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d649c]
2015-03-31T22:24:09.322Z,1427840649.322 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64ec]
2015-03-31T22:24:09.343Z,1427840649.343 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:09.349Z,1427840649.349 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:09.450Z,1427840649.450 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:09.453Z,1427840649.453 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:09.453Z,1427840649.453 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:09.469Z,1427840649.469 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:09.471Z,1427840649.471 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:09.935Z,1427840649.935 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:09.953Z,1427840649.953 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:09.959Z,1427840649.959 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:10.111Z,1427840650.111 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:10.128Z,1427840650.128 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:10.405Z,1427840650.405 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:10.552Z,1427840650.552 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:10.554Z,1427840650.554 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:10.811Z,1427840650.811 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:10.835Z,1427840650.835 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:10.841Z,1427840650.841 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:10.964Z,1427840650.964 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:10.966Z,1427840650.966 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:11.294Z,1427840651.294 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:11.312Z,1427840651.312 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:11.317Z,1427840651.318 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:11.417Z,1427840651.417 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:11.428Z,1427840651.428 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:11.741Z,1427840651.741 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:11.744Z,1427840651.744 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:11.744Z,1427840651.744 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:11.769Z,1427840651.769 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:11.775Z,1427840651.775 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:12.156Z,1427840652.156 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:12.163Z,1427840652.163 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:12.163Z,1427840652.163 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:12.188Z,1427840652.188 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:12.195Z,1427840652.195 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:12.447Z,1427840652.447 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:12.449Z,1427840652.449 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:12.449Z,1427840652.449 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:12.465Z,1427840652.465 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:12.468Z,1427840652.468 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:13.013Z,1427840653.013 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:13.020Z,1427840653.020 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:13.020Z,1427840653.020 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:13.045Z,1427840653.045 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:13.047Z,1427840653.047 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:13.224Z,1427840653.224 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:13.226Z,1427840653.226 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:13.226Z,1427840653.226 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:13.264Z,1427840653.264 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:13.266Z,1427840653.266 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:13.773Z,1427840653.773 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:13.791Z,1427840653.791 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:13.793Z,1427840653.793 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:13.893Z,1427840653.893 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:13.895Z,1427840653.895 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:14.272Z,1427840654.272 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:14.278Z,1427840654.278 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:14.279Z,1427840654.279 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:14.366Z,1427840654.366 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:14.383Z,1427840654.383 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:14.672Z,1427840654.672 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:14.679Z,1427840654.679 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:14.679Z,1427840654.679 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:14.784Z,1427840654.784 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:14.801Z,1427840654.801 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:15.205Z,1427840655.205 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:15.252Z,1427840655.252 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:15.253Z,1427840655.253 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:15.441Z,1427840655.441 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:15.443Z,1427840655.443 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:15.744Z,1427840655.744 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:15.773Z,1427840655.773 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:15.775Z,1427840655.775 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:15.871Z,1427840655.871 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:15.877Z,1427840655.877 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:16.024Z,1427840656.024 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:16.026Z,1427840656.026 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:16.027Z,1427840656.027 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:16.077Z,1427840656.077 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:16.079Z,1427840656.079 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:16.429Z,1427840656.429 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:16.505Z,1427840656.505 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:16.506Z,1427840656.506 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:16.726Z,1427840656.726 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:16.728Z,1427840656.728 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:16.861Z,1427840656.861 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:16.864Z,1427840656.864 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:16.864Z,1427840656.864 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:16.914Z,1427840656.914 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:16.916Z,1427840656.916 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:17.173Z,1427840657.173 [CommandLine](IMPORTANT): got command report mod NAL9602.sigQuality
2015-03-31T22:24:17.347Z,1427840657.347 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:17.408Z,1427840657.408 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:17.414Z,1427840657.414 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:17.540Z,1427840657.540 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:17.557Z,1427840657.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:17.620Z,1427840657.620 [Reporter](INFO): NAL9602.sigQuality 0 count
2015-03-31T22:24:17.859Z,1427840657.859 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:17.877Z,1427840657.877 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:17.878Z,1427840657.878 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:17.979Z,1427840657.979 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:17.981Z,1427840657.981 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:24.561Z,1427840664.561 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:24.564Z,1427840664.564 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64a4]
2015-03-31T22:24:24.564Z,1427840664.564 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64f4]
2015-03-31T22:24:29.972Z,1427840669.972 [BPC1](ERROR): Failed to receive battery data
2015-03-31T22:24:29.972Z,1427840669.972 [BPC1] Communications Fault, FailCount= 1
2015-03-31T22:24:29.973Z,1427840669.973 [BPC1](ERROR): Communications Fault
2015-03-31T22:24:30.028Z,1427840670.028 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:30.044Z,1427840670.044 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:30.181Z,1427840670.181 [CBIT](ERROR): Communications Fault in component: BPC1
2015-03-31T22:24:30.331Z,1427840670.331 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:30.338Z,1427840670.338 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:30.338Z,1427840670.338 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:30.463Z,1427840670.463 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:30.480Z,1427840670.480 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:30.725Z,1427840670.725 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:30.732Z,1427840670.732 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:30.732Z,1427840670.732 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:30.753Z,1427840670.753 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:30.759Z,1427840670.759 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:31.076Z,1427840671.076 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:31.078Z,1427840671.078 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:31.078Z,1427840671.078 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:31.091Z,1427840671.091 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:31.093Z,1427840671.093 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:31.137Z,1427840671.137 [CBIT](INFO): Clearing failed state for component BPC1
2015-03-31T22:24:31.137Z,1427840671.137 [BPC1] No Fault, FailCount= 1
2015-03-31T22:24:31.571Z,1427840671.571 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:31.577Z,1427840671.577 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:31.577Z,1427840671.577 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:31.674Z,1427840671.674 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:31.676Z,1427840671.676 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:31.853Z,1427840671.853 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:31.855Z,1427840671.855 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:31.855Z,1427840671.855 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:31.868Z,1427840671.868 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:31.886Z,1427840671.886 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:32.394Z,1427840672.394 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:32.411Z,1427840672.411 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:32.413Z,1427840672.413 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:32.506Z,1427840672.506 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:32.522Z,1427840672.522 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:32.829Z,1427840672.829 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:32.840Z,1427840672.840 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:32.841Z,1427840672.841 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:33.037Z,1427840673.037 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:33.063Z,1427840673.063 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:33.450Z,1427840673.450 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:33.476Z,1427840673.476 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:33.477Z,1427840673.477 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:33.599Z,1427840673.599 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:33.609Z,1427840673.609 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:34.095Z,1427840674.095 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:34.137Z,1427840674.137 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:34.139Z,1427840674.139 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:34.421Z,1427840674.421 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:34.423Z,1427840674.423 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:34.525Z,1427840674.525 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:34.527Z,1427840674.527 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:34.528Z,1427840674.528 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:34.556Z,1427840674.556 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:34.558Z,1427840674.558 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:34.905Z,1427840674.905 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:34.907Z,1427840674.907 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:34.908Z,1427840674.908 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:34.974Z,1427840674.974 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:34.991Z,1427840674.991 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:35.342Z,1427840675.342 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:35.345Z,1427840675.345 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:35.345Z,1427840675.345 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:35.390Z,1427840675.390 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:35.392Z,1427840675.392 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:35.723Z,1427840675.723 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:35.726Z,1427840675.726 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:35.726Z,1427840675.726 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:35.782Z,1427840675.782 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:35.865Z,1427840675.865 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:36.520Z,1427840676.520 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:36.522Z,1427840676.522 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:36.523Z,1427840676.523 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:36.551Z,1427840676.551 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:36.649Z,1427840676.649 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:37.402Z,1427840677.402 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:37.427Z,1427840677.427 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:37.428Z,1427840677.428 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:37.609Z,1427840677.609 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:37.644Z,1427840677.644 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:37.891Z,1427840677.891 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:37.912Z,1427840677.912 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:37.913Z,1427840677.913 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:38.097Z,1427840678.097 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:38.123Z,1427840678.123 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:38.255Z,1427840678.255 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:38.257Z,1427840678.257 [Rowe_600](ERROR): Different number of beams (-2139062144) than expected (4).
2015-03-31T22:24:38.258Z,1427840678.258 [Rowe_600](ERROR): Different number of bins (-2147483618) than expected (30).
2015-03-31T22:24:38.294Z,1427840678.294 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:38.304Z,1427840678.304 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:38.623Z,1427840678.623 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:38.629Z,1427840678.629 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:38.641Z,1427840678.641 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:38.782Z,1427840678.782 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:38.804Z,1427840678.804 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:39.030Z,1427840679.030 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:39.032Z,1427840679.032 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:39.033Z,1427840679.033 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:39.058Z,1427840679.058 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:39.059Z,1427840679.059 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:39.384Z,1427840679.384 [DataOverHttps](INFO): Exceeded connection timeout, disconnecting.
2015-03-31T22:24:39.436Z,1427840679.436 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:39.438Z,1427840679.438 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:39.439Z,1427840679.439 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:39.451Z,1427840679.451 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:39.453Z,1427840679.453 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:39.877Z,1427840679.877 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:39.887Z,1427840679.887 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:39.889Z,1427840679.889 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:40.035Z,1427840680.035 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:40.053Z,1427840680.053 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:40.337Z,1427840680.337 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:40.358Z,1427840680.358 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:40.360Z,1427840680.360 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:40.524Z,1427840680.524 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:40.537Z,1427840680.537 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:40.783Z,1427840680.783 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:40.801Z,1427840680.801 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:40.802Z,1427840680.802 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:40.930Z,1427840680.930 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:40.951Z,1427840680.951 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:41.186Z,1427840681.186 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:41.208Z,1427840681.208 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:41.209Z,1427840681.209 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:41.402Z,1427840681.402 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:41.408Z,1427840681.408 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:41.606Z,1427840681.606 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:41.623Z,1427840681.623 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:41.633Z,1427840681.633 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:41.770Z,1427840681.770 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:41.786Z,1427840681.786 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:41.889Z,1427840681.889 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:41.892Z,1427840681.892 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:41.896Z,1427840681.896 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:41.917Z,1427840681.917 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:41.919Z,1427840681.919 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:42.308Z,1427840682.308 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:42.311Z,1427840682.311 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:42.311Z,1427840682.311 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:42.324Z,1427840682.324 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:42.352Z,1427840682.352 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:49.489Z,1427840689.489 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:49.491Z,1427840689.491 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:49.492Z,1427840689.492 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:49.500Z,1427840689.500 [BPC1](ERROR): Failed to receive battery data
2015-03-31T22:24:49.500Z,1427840689.500 [BPC1] Communications Fault, FailCount= 2
2015-03-31T22:24:49.501Z,1427840689.501 [BPC1](ERROR): Communications Fault
2015-03-31T22:24:49.507Z,1427840689.507 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:49.524Z,1427840689.524 [DeadReckonUsingMultipleVelocitySources](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:49.525Z,1427840689.525 [DeadReckonUsingMultipleVelocitySources] Software Fault, FailCount= 3
2015-03-31T22:24:49.525Z,1427840689.525 [DeadReckonUsingMultipleVelocitySources](ERROR): Software Fault
2015-03-31T22:24:49.527Z,1427840689.527 [DeadReckonUsingSpeedCalculator](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:49.527Z,1427840689.527 [DeadReckonUsingSpeedCalculator] Software Fault, FailCount= 3
2015-03-31T22:24:49.527Z,1427840689.527 [DeadReckonUsingSpeedCalculator](ERROR): Software Fault
2015-03-31T22:24:49.533Z,1427840689.533 [DeadReckonWithRespectToWater](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:49.534Z,1427840689.534 [DeadReckonWithRespectToWater] Software Fault, FailCount= 3
2015-03-31T22:24:49.534Z,1427840689.534 [DeadReckonWithRespectToWater](ERROR): Software Fault
2015-03-31T22:24:49.536Z,1427840689.536 [DeadReckonWithRespectToSeafloor](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:49.538Z,1427840689.538 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 3
2015-03-31T22:24:49.538Z,1427840689.538 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2015-03-31T22:24:49.541Z,1427840689.541 [DeadReckonUsingDVLWaterTrack](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:49.541Z,1427840689.541 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 3
2015-03-31T22:24:49.541Z,1427840689.541 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2015-03-31T22:24:49.646Z,1427840689.646 [CBIT](ERROR): Software Fault in component: DeadReckonUsingMultipleVelocitySources
2015-03-31T22:24:49.647Z,1427840689.647 [CBIT](ERROR): Software Fault in component: DeadReckonUsingSpeedCalculator
2015-03-31T22:24:49.653Z,1427840689.653 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToWater
2015-03-31T22:24:49.655Z,1427840689.655 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2015-03-31T22:24:49.661Z,1427840689.661 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2015-03-31T22:24:49.664Z,1427840689.664 [CBIT](ERROR): Communications Fault in component: BPC1
2015-03-31T22:24:49.915Z,1427840689.915 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:49.921Z,1427840689.921 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:49.921Z,1427840689.921 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:49.970Z,1427840689.970 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:49.999Z,1427840689.999 [CBIT](INFO): Clearing failed state for component DeadReckonUsingMultipleVelocitySources
2015-03-31T22:24:49.999Z,1427840689.999 [DeadReckonUsingMultipleVelocitySources] No Fault, FailCount= 3
2015-03-31T22:24:50.000Z,1427840690.000 [CBIT](INFO): Clearing failed state for component DeadReckonUsingSpeedCalculator
2015-03-31T22:24:50.000Z,1427840690.000 [DeadReckonUsingSpeedCalculator] No Fault, FailCount= 3
2015-03-31T22:24:50.005Z,1427840690.005 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToWater
2015-03-31T22:24:50.005Z,1427840690.005 [DeadReckonWithRespectToWater] No Fault, FailCount= 3
2015-03-31T22:24:50.006Z,1427840690.006 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2015-03-31T22:24:50.006Z,1427840690.006 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 3
2015-03-31T22:24:50.007Z,1427840690.007 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2015-03-31T22:24:50.007Z,1427840690.007 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 3
2015-03-31T22:24:50.130Z,1427840690.130 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:50.132Z,1427840690.132 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:50.133Z,1427840690.133 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:50.154Z,1427840690.154 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:50.154Z,1427840690.154 [DeadReckonUsingMultipleVelocitySources](DEBUG): Initializing DeadReckonUsingMultipleVelocitySources component.
2015-03-31T22:24:50.155Z,1427840690.155 [DeadReckonUsingSpeedCalculator](DEBUG): Initializing DeadReckonUsingSpeedCalculator component.
2015-03-31T22:24:50.155Z,1427840690.155 [DeadReckonWithRespectToWater](DEBUG): Initializing DeadReckonWithRespectToWater component.
2015-03-31T22:24:50.155Z,1427840690.155 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2015-03-31T22:24:50.156Z,1427840690.156 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2015-03-31T22:24:50.676Z,1427840690.676 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:50.693Z,1427840690.693 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:50.694Z,1427840690.694 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:50.776Z,1427840690.776 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:50.777Z,1427840690.777 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 0 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:24:50.782Z,1427840690.782 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:50.854Z,1427840690.854 [CBIT](INFO): Clearing failed state for component BPC1
2015-03-31T22:24:50.858Z,1427840690.858 [BPC1] No Fault, FailCount= 2
2015-03-31T22:24:51.101Z,1427840691.101 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:51.118Z,1427840691.118 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:51.124Z,1427840691.124 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:51.375Z,1427840691.375 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:51.389Z,1427840691.389 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 1 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:24:51.398Z,1427840691.398 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:51.671Z,1427840691.671 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:51.693Z,1427840691.693 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:51.695Z,1427840691.695 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:51.843Z,1427840691.843 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:51.856Z,1427840691.856 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 2 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:24:51.866Z,1427840691.866 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:52.077Z,1427840692.077 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:52.095Z,1427840692.095 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:52.100Z,1427840692.100 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:52.226Z,1427840692.226 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:52.235Z,1427840692.235 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 3 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:24:52.253Z,1427840692.253 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:52.393Z,1427840692.393 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:52.395Z,1427840692.395 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64a4]
2015-03-31T22:24:52.396Z,1427840692.396 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64f4]
2015-03-31T22:24:52.535Z,1427840692.535 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:52.544Z,1427840692.544 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 4 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:24:52.557Z,1427840692.557 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:52.810Z,1427840692.810 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:52.812Z,1427840692.812 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:52.812Z,1427840692.812 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:52.841Z,1427840692.841 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:52.842Z,1427840692.842 [DeadReckonUsingMultipleVelocitySources](DEBUG): No bottom track data -- 5 cycles since last successful read, accepting data for 5 cycles.
2015-03-31T22:24:52.843Z,1427840692.843 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:53.193Z,1427840693.193 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:53.195Z,1427840693.195 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:53.195Z,1427840693.195 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:53.208Z,1427840693.208 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:53.210Z,1427840693.210 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:53.627Z,1427840693.627 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:53.629Z,1427840693.629 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:53.629Z,1427840693.629 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:53.646Z,1427840693.646 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:53.652Z,1427840693.652 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:53.975Z,1427840693.975 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:53.977Z,1427840693.977 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:53.978Z,1427840693.978 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:53.990Z,1427840693.990 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:54.012Z,1427840694.012 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:54.484Z,1427840694.484 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:54.486Z,1427840694.486 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:54.487Z,1427840694.487 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:54.500Z,1427840694.500 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:54.501Z,1427840694.501 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:24:54.873Z,1427840694.873 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:24:54.875Z,1427840694.875 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:24:54.875Z,1427840694.875 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:24:54.935Z,1427840694.935 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:24:54.961Z,1427840694.961 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:01.459Z,1427840701.459 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:01.462Z,1427840701.462 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:01.462Z,1427840701.462 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:01.475Z,1427840701.475 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:01.477Z,1427840701.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:01.713Z,1427840701.713 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:01.735Z,1427840701.735 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:01.737Z,1427840701.737 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:01.886Z,1427840701.886 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:01.892Z,1427840701.892 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:02.157Z,1427840702.157 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:02.175Z,1427840702.175 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:02.180Z,1427840702.180 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:02.285Z,1427840702.285 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:02.287Z,1427840702.287 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:02.545Z,1427840702.545 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:02.673Z,1427840702.673 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:02.675Z,1427840702.675 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:02.837Z,1427840702.837 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20150331T184757/Courier0072.lzma
2015-03-31T22:25:03.011Z,1427840703.011 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:03.038Z,1427840703.038 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:03.039Z,1427840703.039 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:03.076Z,1427840703.076 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:03.082Z,1427840703.082 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:03.434Z,1427840703.434 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:03.450Z,1427840703.450 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:03.450Z,1427840703.450 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:03.475Z,1427840703.475 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:03.477Z,1427840703.477 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:03.835Z,1427840703.835 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:03.853Z,1427840703.853 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:03.858Z,1427840703.858 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:03.954Z,1427840703.954 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:03.956Z,1427840703.956 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:04.062Z,1427840704.062 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:04.065Z,1427840704.065 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:04.065Z,1427840704.065 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:04.078Z,1427840704.078 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:04.080Z,1427840704.080 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:04.535Z,1427840704.535 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:04.544Z,1427840704.544 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:04.545Z,1427840704.545 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:04.696Z,1427840704.696 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:04.713Z,1427840704.713 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:04.821Z,1427840704.821 [DataOverHttps](INFO): Moved sent file to Logs/20150331T184757/Courier0072.lzma.bak
2015-03-31T22:25:04.821Z,1427840704.821 [DataOverHttps](INFO): SBD MOMSN=3094247
2015-03-31T22:25:04.882Z,1427840704.882 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:04.888Z,1427840704.888 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:04.888Z,1427840704.888 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:04.936Z,1427840704.936 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:04.937Z,1427840704.937 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:05.394Z,1427840705.394 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:05.412Z,1427840705.412 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:05.418Z,1427840705.418 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:05.543Z,1427840705.543 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:05.560Z,1427840705.560 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:05.837Z,1427840705.837 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:05.855Z,1427840705.855 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:05.856Z,1427840705.856 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:05.992Z,1427840705.992 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:05.995Z,1427840705.995 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:06.272Z,1427840706.272 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:06.295Z,1427840706.295 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:06.296Z,1427840706.296 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:06.410Z,1427840706.410 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:06.412Z,1427840706.412 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:06.779Z,1427840706.779 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:06.782Z,1427840706.782 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:06.782Z,1427840706.782 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:06.884Z,1427840706.884 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:06.900Z,1427840706.900 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:07.177Z,1427840707.177 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:07.179Z,1427840707.179 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:07.184Z,1427840707.184 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:07.205Z,1427840707.205 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:07.206Z,1427840707.206 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:07.602Z,1427840707.602 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:07.609Z,1427840707.609 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:07.609Z,1427840707.609 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:07.630Z,1427840707.630 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:07.636Z,1427840707.636 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:14.585Z,1427840714.585 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:14.588Z,1427840714.588 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:14.588Z,1427840714.588 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:14.601Z,1427840714.601 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:14.603Z,1427840714.603 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:14.823Z,1427840714.823 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:14.844Z,1427840714.844 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:14.846Z,1427840714.846 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:14.987Z,1427840714.987 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:15.003Z,1427840715.003 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:15.090Z,1427840715.090 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:15.096Z,1427840715.096 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:15.097Z,1427840715.097 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:15.131Z,1427840715.131 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:15.137Z,1427840715.137 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:15.489Z,1427840715.489 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:15.491Z,1427840715.491 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:15.491Z,1427840715.491 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:15.591Z,1427840715.591 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:15.610Z,1427840715.610 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:15.910Z,1427840715.910 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:15.912Z,1427840715.912 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:15.912Z,1427840715.912 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:15.942Z,1427840715.942 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:15.943Z,1427840715.943 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:16.294Z,1427840716.294 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:16.296Z,1427840716.296 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:16.297Z,1427840716.297 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:16.334Z,1427840716.334 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:16.336Z,1427840716.336 [DeadReckonUsingMultipleVelocitySources](DEBUG): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:25:16.731Z,1427840716.731 [NAL9602](INFO): GPS fix at 20150331T221834: (36.802865, -121.787864)
2015-03-31T22:25:16.775Z,1427840716.775 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:16.793Z,1427840716.793 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:16.794Z,1427840716.794 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:16.944Z,1427840716.944 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:17.310Z,1427840717.310 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:17.341Z,1427840717.341 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:17.342Z,1427840717.342 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:17.513Z,1427840717.513 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:17.903Z,1427840717.903 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:17.910Z,1427840717.910 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:17.910Z,1427840717.910 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:17.954Z,1427840717.954 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:18.321Z,1427840718.321 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:18.323Z,1427840718.323 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:18.324Z,1427840718.324 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:18.411Z,1427840718.411 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:18.751Z,1427840718.751 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:18.753Z,1427840718.753 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:18.758Z,1427840718.758 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:18.782Z,1427840718.782 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:19.116Z,1427840719.116 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:19.119Z,1427840719.119 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:19.119Z,1427840719.119 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:19.132Z,1427840719.132 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:19.594Z,1427840719.594 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:19.599Z,1427840719.599 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:19.599Z,1427840719.599 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:19.631Z,1427840719.631 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:19.906Z,1427840719.906 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:19.909Z,1427840719.909 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:19.909Z,1427840719.909 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:19.946Z,1427840719.946 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:20.441Z,1427840720.441 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:20.443Z,1427840720.443 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:20.443Z,1427840720.443 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:20.484Z,1427840720.484 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:20.840Z,1427840720.840 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:20.847Z,1427840720.847 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:20.847Z,1427840720.847 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:20.911Z,1427840720.911 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:36.634Z,1427840736.634 [NAL9602](INFO): Powering down
2015-03-31T22:25:36.852Z,1427840736.852 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:36.872Z,1427840736.872 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:36.872Z,1427840736.872 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:36.894Z,1427840736.894 [BPC1](ERROR): Failed to receive battery data
2015-03-31T22:25:36.894Z,1427840736.894 [BPC1] Communications Fault, FailCount= 1
2015-03-31T22:25:36.894Z,1427840736.894 [BPC1](ERROR): Communications Fault
2015-03-31T22:25:36.908Z,1427840736.908 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:37.172Z,1427840737.172 [CBIT](ERROR): Communications Fault in component: BPC1
2015-03-31T22:25:37.315Z,1427840737.315 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:37.317Z,1427840737.317 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:37.346Z,1427840737.346 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:37.606Z,1427840737.606 [DataOverHttps](INFO): Sending 154 bytes from file Logs/20150331T221506/Courier0000.lzma
2015-03-31T22:25:37.681Z,1427840737.681 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:37.688Z,1427840737.688 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:37.688Z,1427840737.688 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:37.741Z,1427840737.741 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:38.145Z,1427840738.145 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:38.156Z,1427840738.156 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:38.156Z,1427840738.156 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:38.221Z,1427840738.221 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:38.281Z,1427840738.281 [CBIT](INFO): Clearing failed state for component BPC1
2015-03-31T22:25:38.281Z,1427840738.281 [BPC1] No Fault, FailCount= 1
2015-03-31T22:25:38.464Z,1427840738.464 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:38.470Z,1427840738.470 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:38.471Z,1427840738.471 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:38.602Z,1427840738.602 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:38.000Z,1427840739.000 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:39.010Z,1427840739.010 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:39.010Z,1427840739.010 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:39.129Z,1427840739.129 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:39.526Z,1427840739.526 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:39.544Z,1427840739.544 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:39.545Z,1427840739.545 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:39.741Z,1427840739.741 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:39.976Z,1427840739.976 [DataOverHttps](INFO): Moved sent file to Logs/20150331T221506/Courier0000.lzma.bak
2015-03-31T22:25:39.977Z,1427840739.977 [DataOverHttps](INFO): SBD MOMSN=3094249
2015-03-31T22:25:40.171Z,1427840740.171 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:40.174Z,1427840740.174 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:40.174Z,1427840740.174 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:40.304Z,1427840740.304 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:41.043Z,1427840741.043 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:41.057Z,1427840741.057 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:41.057Z,1427840741.057 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:41.106Z,1427840741.106 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:41.518Z,1427840741.518 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:41.543Z,1427840741.543 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:41.553Z,1427840741.553 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:41.748Z,1427840741.748 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:41.850Z,1427840741.850 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-03-31T22:25:41.850Z,1427840741.850 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-03-31T22:25:41.850Z,1427840741.850 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-03-31T22:25:41.851Z,1427840741.851 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-03-31T22:25:41.851Z,1427840741.851 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-03-31T22:25:41.942Z,1427840741.942 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:41.944Z,1427840741.944 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:41.944Z,1427840741.944 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:41.969Z,1427840741.969 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:41.995Z,1427840741.995 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 6.817871 min 
2015-03-31T22:25:41.995Z,1427840741.995 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-03-31T22:25:41.995Z,1427840741.995 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-03-31T22:25:41.995Z,1427840741.995 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-03-31T22:25:41.996Z,1427840741.996 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-03-31T22:25:42.330Z,1427840742.330 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:42.332Z,1427840742.332 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:42.333Z,1427840742.333 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:42.346Z,1427840742.346 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:42.848Z,1427840742.848 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:42.878Z,1427840742.878 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:42.884Z,1427840742.884 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:43.078Z,1427840743.078 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:51.124Z,1427840751.124 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:51.142Z,1427840751.142 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:51.148Z,1427840751.148 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:51.347Z,1427840751.347 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:51.731Z,1427840751.731 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:51.741Z,1427840751.741 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:51.741Z,1427840751.741 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:51.851Z,1427840751.851 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:52.180Z,1427840752.180 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:52.186Z,1427840752.186 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:52.187Z,1427840752.187 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:52.233Z,1427840752.233 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:52.561Z,1427840752.561 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:52.580Z,1427840752.580 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:52.580Z,1427840752.580 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:52.592Z,1427840752.592 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:52.998Z,1427840752.998 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:53.012Z,1427840753.012 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:53.058Z,1427840753.058 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:53.354Z,1427840753.354 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:53.357Z,1427840753.357 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:53.358Z,1427840753.358 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:53.408Z,1427840753.408 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:53.838Z,1427840753.838 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:53.841Z,1427840753.841 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:53.841Z,1427840753.841 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:53.854Z,1427840753.854 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:54.304Z,1427840754.304 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:54.326Z,1427840754.326 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:54.327Z,1427840754.327 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:54.514Z,1427840754.514 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:54.931Z,1427840754.931 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:54.957Z,1427840754.957 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:54.966Z,1427840754.966 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:55.029Z,1427840755.029 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:55.439Z,1427840755.439 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:55.441Z,1427840755.441 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:55.442Z,1427840755.442 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:55.533Z,1427840755.533 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:55.892Z,1427840755.892 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:55.894Z,1427840755.894 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:55.894Z,1427840755.894 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:55.923Z,1427840755.923 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:56.556Z,1427840756.556 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:56.583Z,1427840756.583 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:56.584Z,1427840756.584 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:56.712Z,1427840756.712 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:56.839Z,1427840756.839 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:56.849Z,1427840756.849 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:56.850Z,1427840756.850 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:56.888Z,1427840756.888 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:25:57.400Z,1427840757.400 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:25:57.435Z,1427840757.435 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:25:57.436Z,1427840757.436 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:25:57.557Z,1427840757.557 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:07.827Z,1427840767.827 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:07.829Z,1427840767.829 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:07.829Z,1427840767.829 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:07.918Z,1427840767.918 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:08.214Z,1427840768.214 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:08.232Z,1427840768.232 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:08.233Z,1427840768.233 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:08.345Z,1427840768.345 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:08.778Z,1427840768.778 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:08.808Z,1427840768.808 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:08.809Z,1427840768.809 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:08.920Z,1427840768.920 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:09.154Z,1427840769.154 [DataOverHttps](INFO): Sending 193 bytes from file Logs/20150331T221506/Courier0004.lzma
2015-03-31T22:26:09.345Z,1427840769.345 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:09.362Z,1427840769.362 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64a4]
2015-03-31T22:26:09.363Z,1427840769.363 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64f4]
2015-03-31T22:26:09.492Z,1427840769.492 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:09.882Z,1427840769.882 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:09.941Z,1427840769.941 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:10.313Z,1427840770.313 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:10.320Z,1427840770.320 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:10.320Z,1427840770.320 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:10.345Z,1427840770.345 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:10.557Z,1427840770.557 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:10.558Z,1427840770.558 [Rowe_600](ERROR): payload size is too large: 1118946984 -- attempting to continue using maximum payload size: 4080
2015-03-31T22:26:10.564Z,1427840770.564 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d63a0]
2015-03-31T22:26:10.564Z,1427840770.564 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d63f0]
2015-03-31T22:26:10.614Z,1427840770.614 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:11.080Z,1427840771.080 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:11.117Z,1427840771.117 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:11.118Z,1427840771.118 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:11.219Z,1427840771.219 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:11.337Z,1427840771.337 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:11.348Z,1427840771.348 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:11.348Z,1427840771.348 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:11.369Z,1427840771.369 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:11.732Z,1427840771.732 [DataOverHttps](INFO): Moved sent file to Logs/20150331T221506/Courier0004.lzma.bak
2015-03-31T22:26:11.733Z,1427840771.733 [DataOverHttps](INFO): SBD MOMSN=3094255
2015-03-31T22:26:12.001Z,1427840772.001 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:12.019Z,1427840772.019 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:12.025Z,1427840772.025 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:12.048Z,1427840772.048 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:13.341Z,1427840773.341 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:13.362Z,1427840773.362 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:13.364Z,1427840773.364 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:13.498Z,1427840773.498 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:13.657Z,1427840773.657 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:13.663Z,1427840773.663 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:13.663Z,1427840773.663 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:13.770Z,1427840773.770 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:14.059Z,1427840774.059 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:14.066Z,1427840774.066 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:14.066Z,1427840774.066 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:14.097Z,1427840774.097 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:14.470Z,1427840774.470 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:14.472Z,1427840774.472 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:14.472Z,1427840774.472 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:14.485Z,1427840774.485 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:14.909Z,1427840774.909 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:14.911Z,1427840774.911 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:14.911Z,1427840774.911 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:14.941Z,1427840774.941 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:22.224Z,1427840782.224 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:22.243Z,1427840782.243 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:22.249Z,1427840782.249 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:22.360Z,1427840782.360 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:22.505Z,1427840782.505 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:22.530Z,1427840782.530 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:23.028Z,1427840783.028 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:23.052Z,1427840783.052 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:23.053Z,1427840783.053 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:23.183Z,1427840783.183 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:23.572Z,1427840783.572 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:23.578Z,1427840783.578 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d638f]
2015-03-31T22:26:23.591Z,1427840783.591 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d63df]
2015-03-31T22:26:23.894Z,1427840783.894 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:24.457Z,1427840784.457 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:24.720Z,1427840784.720 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:25.095Z,1427840785.095 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:25.131Z,1427840785.131 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:25.142Z,1427840785.142 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:25.204Z,1427840785.204 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:25.374Z,1427840785.374 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:25.376Z,1427840785.376 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:25.376Z,1427840785.376 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:25.413Z,1427840785.413 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:25.866Z,1427840785.866 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:25.876Z,1427840785.876 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:25.877Z,1427840785.877 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:25.990Z,1427840785.990 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:26.141Z,1427840786.141 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:26.143Z,1427840786.143 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:26.143Z,1427840786.143 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:26.156Z,1427840786.156 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:26.727Z,1427840786.727 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:26.760Z,1427840786.760 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:26.761Z,1427840786.761 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:26.886Z,1427840786.886 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:27.291Z,1427840787.291 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:27.315Z,1427840787.315 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:27.325Z,1427840787.325 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:27.538Z,1427840787.538 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:27.813Z,1427840787.813 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:27.832Z,1427840787.832 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:27.832Z,1427840787.832 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:28.019Z,1427840788.019 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:28.327Z,1427840788.327 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:28.344Z,1427840788.344 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:28.350Z,1427840788.350 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:28.443Z,1427840788.443 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:28.717Z,1427840788.717 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:28.747Z,1427840788.747 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:28.748Z,1427840788.748 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:28.862Z,1427840788.862 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:28.974Z,1427840788.974 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:28.981Z,1427840788.981 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:28.981Z,1427840788.981 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:29.006Z,1427840789.006 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:38.175Z,1427840798.175 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:38.184Z,1427840798.184 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:38.186Z,1427840798.186 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:38.452Z,1427840798.452 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:38.788Z,1427840798.788 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:38.794Z,1427840798.794 [Rowe_600](ERROR): Different number of beams (0) than expected (4).
2015-03-31T22:26:38.795Z,1427840798.795 [Rowe_600](ERROR): Different number of bins (0) than expected (30).
2015-03-31T22:26:38.795Z,1427840798.795 [Rowe_600](ERROR): Ensemble number mismatch: 1187 in header, 1197 in ensemble data matrix.
2015-03-31T22:26:38.851Z,1427840798.851 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:39.169Z,1427840799.169 [DataOverHttps](INFO): Sending 359 bytes from file Logs/20150331T184757/Express0069.lzma
2015-03-31T22:26:39.217Z,1427840799.217 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:39.239Z,1427840799.239 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:39.241Z,1427840799.241 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:39.380Z,1427840799.380 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:39.599Z,1427840799.599 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:39.601Z,1427840799.601 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d6494]
2015-03-31T22:26:39.602Z,1427840799.602 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64e4]
2015-03-31T22:26:39.686Z,1427840799.686 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:40.018Z,1427840800.018 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:40.025Z,1427840800.025 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:40.025Z,1427840800.025 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:40.051Z,1427840800.051 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:40.406Z,1427840800.406 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:40.408Z,1427840800.408 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:40.409Z,1427840800.409 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:40.475Z,1427840800.475 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:40.863Z,1427840800.863 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:40.867Z,1427840800.867 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:40.867Z,1427840800.867 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:40.925Z,1427840800.925 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:41.194Z,1427840801.194 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:41.196Z,1427840801.196 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:41.196Z,1427840801.196 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:41.225Z,1427840801.225 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:41.712Z,1427840801.712 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:41.715Z,1427840801.715 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:41.715Z,1427840801.715 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:41.740Z,1427840801.740 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:42.108Z,1427840802.108 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:42.110Z,1427840802.110 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:42.111Z,1427840802.111 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:42.159Z,1427840802.159 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:42.502Z,1427840802.502 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:42.508Z,1427840802.508 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:42.508Z,1427840802.508 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:42.577Z,1427840802.577 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:42.866Z,1427840802.866 [DataOverHttps](INFO): Moved sent file to Logs/20150331T184757/Express0069.lzma.bak
2015-03-31T22:26:42.867Z,1427840802.867 [DataOverHttps](INFO): SBD MOMSN=3094257
2015-03-31T22:26:43.033Z,1427840803.033 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:43.051Z,1427840803.051 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:43.052Z,1427840803.052 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:43.202Z,1427840803.202 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:43.782Z,1427840803.782 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:43.784Z,1427840803.784 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:43.784Z,1427840803.784 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:43.809Z,1427840803.809 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:43.918Z,1427840803.918 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:43.920Z,1427840803.920 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:43.920Z,1427840803.920 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:43.941Z,1427840803.941 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:44.437Z,1427840804.437 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:44.460Z,1427840804.460 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:44.462Z,1427840804.462 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:44.567Z,1427840804.567 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:44.687Z,1427840804.687 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:44.689Z,1427840804.689 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:44.689Z,1427840804.689 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:44.726Z,1427840804.726 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:45.200Z,1427840805.200 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:45.221Z,1427840805.221 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:45.223Z,1427840805.223 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:45.346Z,1427840805.346 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:45.637Z,1427840805.637 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:45.776Z,1427840805.776 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:46.139Z,1427840806.139 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:46.216Z,1427840806.216 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:46.620Z,1427840806.620 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:46.621Z,1427840806.621 [Rowe_600](ERROR): first preamble found after 5838 bytes, which is more than sizeof( deviceResponse_ ) 4116
2015-03-31T22:26:46.643Z,1427840806.643 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:46.645Z,1427840806.645 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:46.837Z,1427840806.837 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:47.063Z,1427840807.063 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:47.090Z,1427840807.090 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:47.099Z,1427840807.099 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:47.292Z,1427840807.292 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:47.517Z,1427840807.517 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:47.519Z,1427840807.519 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:47.520Z,1427840807.520 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:47.547Z,1427840807.547 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:47.911Z,1427840807.911 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:47.943Z,1427840807.943 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:47.948Z,1427840807.948 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:48.100Z,1427840808.100 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:48.325Z,1427840808.325 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:48.328Z,1427840808.328 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:48.328Z,1427840808.328 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:48.366Z,1427840808.366 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:48.735Z,1427840808.735 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:48.738Z,1427840808.738 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:48.738Z,1427840808.738 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:48.751Z,1427840808.751 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:49.157Z,1427840809.157 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:49.174Z,1427840809.174 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:49.179Z,1427840809.179 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:49.304Z,1427840809.304 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:49.657Z,1427840809.657 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:49.680Z,1427840809.680 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:49.681Z,1427840809.681 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:49.810Z,1427840809.810 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:50.099Z,1427840810.099 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:50.125Z,1427840810.125 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:50.126Z,1427840810.126 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:50.244Z,1427840810.244 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:50.507Z,1427840810.507 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:50.530Z,1427840810.530 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:50.531Z,1427840810.531 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:50.688Z,1427840810.688 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:50.812Z,1427840810.812 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:50.834Z,1427840810.834 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:50.836Z,1427840810.836 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:50.966Z,1427840810.966 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:51.204Z,1427840811.204 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:51.210Z,1427840811.210 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:51.211Z,1427840811.211 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:51.228Z,1427840811.228 [BPC1](ERROR): Failed to parse message.
2015-03-31T22:26:51.228Z,1427840811.228 [BPC1](ERROR): Failed to parse bank B battery data
2015-03-31T22:26:51.228Z,1427840811.228 [BPC1] Data Fault, FailCount= 1
2015-03-31T22:26:51.228Z,1427840811.228 [BPC1](ERROR): Data Fault
2015-03-31T22:26:51.246Z,1427840811.246 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:51.285Z,1427840811.285 [CBIT](ERROR): Data Fault in component: BPC1
2015-03-31T22:26:51.581Z,1427840811.581 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:51.584Z,1427840811.584 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:51.584Z,1427840811.584 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:51.597Z,1427840811.597 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:52.010Z,1427840812.010 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:52.013Z,1427840812.013 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:52.013Z,1427840812.013 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:52.038Z,1427840812.038 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:52.382Z,1427840812.382 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:52.385Z,1427840812.385 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:52.385Z,1427840812.385 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:52.426Z,1427840812.426 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:52.476Z,1427840812.476 [CBIT](INFO): Clearing failed state for component BPC1
2015-03-31T22:26:52.477Z,1427840812.477 [BPC1] No Fault, FailCount= 1
2015-03-31T22:26:52.855Z,1427840812.855 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:52.858Z,1427840812.858 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:52.859Z,1427840812.859 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:53.193Z,1427840813.193 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:53.455Z,1427840813.455 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:53.492Z,1427840813.492 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:53.502Z,1427840813.502 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:53.664Z,1427840813.664 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:54.024Z,1427840814.024 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:54.035Z,1427840814.035 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:54.035Z,1427840814.035 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:54.176Z,1427840814.176 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:54.478Z,1427840814.478 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:54.501Z,1427840814.501 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:54.502Z,1427840814.502 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:54.627Z,1427840814.627 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:54.877Z,1427840814.877 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:54.884Z,1427840814.884 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:54.885Z,1427840814.885 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:54.910Z,1427840814.910 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:55.289Z,1427840815.289 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:55.291Z,1427840815.291 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:55.292Z,1427840815.292 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:55.305Z,1427840815.305 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:55.711Z,1427840815.711 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:55.718Z,1427840815.718 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:55.718Z,1427840815.718 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:55.741Z,1427840815.741 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:56.070Z,1427840816.070 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:56.072Z,1427840816.072 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:56.072Z,1427840816.072 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:56.106Z,1427840816.106 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:56.560Z,1427840816.560 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:56.563Z,1427840816.563 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:56.563Z,1427840816.563 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:56.576Z,1427840816.576 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:56.953Z,1427840816.953 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:56.959Z,1427840816.959 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:56.959Z,1427840816.959 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:57.023Z,1427840817.023 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:57.380Z,1427840817.380 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:57.398Z,1427840817.398 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:57.404Z,1427840817.404 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:57.520Z,1427840817.520 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:57.794Z,1427840817.794 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:57.816Z,1427840817.816 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:57.817Z,1427840817.817 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:57.954Z,1427840817.954 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:58.169Z,1427840818.169 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:58.172Z,1427840818.172 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:58.172Z,1427840818.172 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:58.247Z,1427840818.247 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:58.584Z,1427840818.584 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:58.590Z,1427840818.590 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:58.591Z,1427840818.591 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:58.611Z,1427840818.611 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:58.968Z,1427840818.968 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:58.986Z,1427840818.986 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:58.986Z,1427840818.986 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:58.999Z,1427840818.999 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:59.416Z,1427840819.416 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:59.419Z,1427840819.419 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:59.419Z,1427840819.419 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:59.432Z,1427840819.432 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:26:59.772Z,1427840819.772 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:26:59.775Z,1427840819.775 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:26:59.775Z,1427840819.775 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:26:59.788Z,1427840819.788 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:00.266Z,1427840820.266 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:00.276Z,1427840820.276 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:00.276Z,1427840820.276 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:00.289Z,1427840820.289 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:00.657Z,1427840820.657 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:00.659Z,1427840820.659 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:00.659Z,1427840820.659 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:00.701Z,1427840820.701 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:01.051Z,1427840821.051 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:01.058Z,1427840821.058 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:01.058Z,1427840821.058 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:01.120Z,1427840821.120 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:01.446Z,1427840821.446 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:01.448Z,1427840821.448 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:01.448Z,1427840821.448 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:01.528Z,1427840821.528 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:01.840Z,1427840821.840 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:01.846Z,1427840821.846 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:01.846Z,1427840821.846 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:01.873Z,1427840821.873 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:02.264Z,1427840822.264 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:02.266Z,1427840822.266 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:02.268Z,1427840822.268 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:02.292Z,1427840822.292 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:02.700Z,1427840822.700 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:02.717Z,1427840822.717 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:02.718Z,1427840822.718 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:02.882Z,1427840822.882 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:02.980Z,1427840822.980 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:02.982Z,1427840822.982 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:02.982Z,1427840822.982 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:03.007Z,1427840823.007 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:03.382Z,1427840823.382 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:03.385Z,1427840823.385 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:03.385Z,1427840823.385 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:03.397Z,1427840823.397 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:03.834Z,1427840823.834 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:03.851Z,1427840823.851 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:03.852Z,1427840823.852 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:04.002Z,1427840824.002 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:04.283Z,1427840824.283 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:04.300Z,1427840824.300 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:04.306Z,1427840824.306 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:04.532Z,1427840824.532 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:04.761Z,1427840824.761 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:04.783Z,1427840824.783 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:04.784Z,1427840824.784 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:04.954Z,1427840824.954 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:05.320Z,1427840825.320 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:05.323Z,1427840825.323 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:05.323Z,1427840825.323 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:05.348Z,1427840825.348 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:05.751Z,1427840825.751 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:05.761Z,1427840825.761 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:05.761Z,1427840825.761 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:05.798Z,1427840825.798 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:05.985Z,1427840825.985 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:05.987Z,1427840825.987 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:05.987Z,1427840825.987 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:06.052Z,1427840826.052 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:06.490Z,1427840826.490 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:06.507Z,1427840826.507 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:06.513Z,1427840826.513 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:06.623Z,1427840826.623 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:06.780Z,1427840826.780 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:06.782Z,1427840826.782 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:06.782Z,1427840826.782 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:06.837Z,1427840826.837 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:07.289Z,1427840827.289 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:07.298Z,1427840827.298 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:07.299Z,1427840827.299 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:07.469Z,1427840827.469 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:07.789Z,1427840827.789 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:07.807Z,1427840827.807 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:07.812Z,1427840827.812 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:07.876Z,1427840827.876 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:08.211Z,1427840828.211 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:08.237Z,1427840828.237 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:08.238Z,1427840828.238 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:08.280Z,1427840828.280 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:08.651Z,1427840828.651 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:08.658Z,1427840828.658 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:08.658Z,1427840828.658 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:08.722Z,1427840828.722 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:09.047Z,1427840829.047 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:09.050Z,1427840829.050 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:09.050Z,1427840829.050 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:09.076Z,1427840829.076 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:09.466Z,1427840829.466 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:09.469Z,1427840829.469 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:09.469Z,1427840829.469 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:09.498Z,1427840829.498 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:09.714Z,1427840829.714 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:09.716Z,1427840829.716 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:09.716Z,1427840829.716 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:09.783Z,1427840829.783 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:10.277Z,1427840830.277 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:10.299Z,1427840830.299 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:10.300Z,1427840830.300 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:10.342Z,1427840830.342 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:10.529Z,1427840830.529 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:10.531Z,1427840830.531 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:10.549Z,1427840830.549 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:10.750Z,1427840830.750 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:11.073Z,1427840831.073 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:11.095Z,1427840831.095 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:11.096Z,1427840831.096 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:11.197Z,1427840831.197 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:11.553Z,1427840831.553 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:11.583Z,1427840831.583 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:11.584Z,1427840831.584 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:11.688Z,1427840831.688 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:11.972Z,1427840831.972 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:11.994Z,1427840831.994 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:11.995Z,1427840831.995 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:12.074Z,1427840832.074 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:12.369Z,1427840832.369 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:12.390Z,1427840832.390 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:12.391Z,1427840832.391 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:12.489Z,1427840832.489 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:12.817Z,1427840832.817 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:12.833Z,1427840832.833 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:12.834Z,1427840832.834 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:12.906Z,1427840832.906 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:13.048Z,1427840833.048 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:13.050Z,1427840833.050 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:13.050Z,1427840833.050 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:13.088Z,1427840833.088 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:13.536Z,1427840833.536 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:13.539Z,1427840833.539 [Rowe_600](DEBUG): 1623 bytes available, but need 4084
2015-03-31T22:27:13.609Z,1427840833.609 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:13.828Z,1427840833.828 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:13.834Z,1427840833.834 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:13.834Z,1427840833.834 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:13.872Z,1427840833.872 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:14.233Z,1427840834.233 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:14.310Z,1427840834.310 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:14.748Z,1427840834.748 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:14.774Z,1427840834.774 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64a4]
2015-03-31T22:27:14.775Z,1427840834.775 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64f4]
2015-03-31T22:27:14.890Z,1427840834.890 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:21.583Z,1427840841.583 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:21.585Z,1427840841.585 [Rowe_600](DEBUG): 1202 bytes available, but need 4084
2015-03-31T22:27:21.636Z,1427840841.636 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:21.884Z,1427840841.884 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:21.905Z,1427840841.905 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:21.907Z,1427840841.907 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:22.022Z,1427840842.022 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:22.314Z,1427840842.314 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:22.332Z,1427840842.332 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:22.338Z,1427840842.338 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:22.427Z,1427840842.427 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:22.731Z,1427840842.731 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:22.748Z,1427840842.748 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:22.750Z,1427840842.750 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:22.869Z,1427840842.869 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:23.219Z,1427840843.219 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:23.222Z,1427840843.222 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:23.222Z,1427840843.222 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:23.302Z,1427840843.302 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:23.610Z,1427840843.610 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:23.620Z,1427840843.620 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:23.620Z,1427840843.620 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:23.663Z,1427840843.663 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:24.060Z,1427840844.060 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:24.071Z,1427840844.071 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:24.071Z,1427840844.071 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:24.140Z,1427840844.140 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:24.380Z,1427840844.380 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:24.391Z,1427840844.391 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:24.391Z,1427840844.391 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:24.428Z,1427840844.428 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:24.907Z,1427840844.907 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:24.918Z,1427840844.918 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:24.918Z,1427840844.918 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:24.963Z,1427840844.963 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:25.190Z,1427840845.190 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:25.192Z,1427840845.192 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:25.193Z,1427840845.193 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:25.234Z,1427840845.234 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:25.865Z,1427840845.865 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:25.936Z,1427840845.936 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:25.937Z,1427840845.937 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:26.136Z,1427840846.136 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:26.623Z,1427840846.623 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:26.653Z,1427840846.653 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:26.654Z,1427840846.654 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:26.916Z,1427840846.916 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:27.351Z,1427840847.351 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:27.353Z,1427840847.353 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:27.419Z,1427840847.419 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:27.704Z,1427840847.704 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:38.902Z,1427840858.902 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:38.911Z,1427840858.911 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:38.912Z,1427840858.912 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:39.084Z,1427840859.084 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:39.135Z,1427840859.135 [DataOverHttps](INFO): Sending 18 bytes from file Logs/20150331T184757/Express0073.lzma
2015-03-31T22:27:39.205Z,1427840859.205 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:39.207Z,1427840859.207 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:39.207Z,1427840859.207 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:39.221Z,1427840859.221 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:39.704Z,1427840859.704 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:39.712Z,1427840859.712 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:39.712Z,1427840859.712 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:39.748Z,1427840859.748 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:39.930Z,1427840859.930 [DataOverHttps](INFO): Moved sent file to Logs/20150331T184757/Express0073.lzma.bak
2015-03-31T22:27:39.930Z,1427840859.930 [DataOverHttps](INFO): SBD MOMSN=3094278
2015-03-31T22:27:39.956Z,1427840859.956 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:39.959Z,1427840859.959 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:39.959Z,1427840859.959 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:39.995Z,1427840859.995 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:40.721Z,1427840860.721 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:40.732Z,1427840860.732 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:40.733Z,1427840860.733 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:40.896Z,1427840860.896 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:41.161Z,1427840861.161 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:41.193Z,1427840861.193 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:41.199Z,1427840861.199 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:41.338Z,1427840861.338 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:48.126Z,1427840868.126 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:48.138Z,1427840868.138 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:48.139Z,1427840868.139 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:48.311Z,1427840868.311 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:48.579Z,1427840868.579 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:48.597Z,1427840868.597 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:48.603Z,1427840868.603 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:48.772Z,1427840868.772 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:49.063Z,1427840869.063 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:49.085Z,1427840869.085 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:49.086Z,1427840869.086 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:49.176Z,1427840869.176 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:49.554Z,1427840869.554 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:49.560Z,1427840869.560 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:49.564Z,1427840869.564 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:49.589Z,1427840869.589 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:49.926Z,1427840869.926 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:49.943Z,1427840869.943 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:49.944Z,1427840869.944 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:49.999Z,1427840869.999 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:50.149Z,1427840870.149 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:50.156Z,1427840870.156 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:50.156Z,1427840870.156 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:50.177Z,1427840870.177 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:50.192Z,1427840870.192 [DeadReckonWithRespectToSeafloor](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:27:50.192Z,1427840870.192 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 1
2015-03-31T22:27:50.192Z,1427840870.192 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2015-03-31T22:27:50.199Z,1427840870.199 [DeadReckonUsingDVLWaterTrack](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:27:50.199Z,1427840870.199 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 1
2015-03-31T22:27:50.200Z,1427840870.200 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2015-03-31T22:27:50.230Z,1427840870.230 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2015-03-31T22:27:50.230Z,1427840870.230 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2015-03-31T22:27:57.561Z,1427840877.561 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:57.563Z,1427840877.563 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:57.563Z,1427840877.563 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:57.612Z,1427840877.612 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:57.640Z,1427840877.640 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2015-03-31T22:27:57.640Z,1427840877.640 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 1
2015-03-31T22:27:57.645Z,1427840877.645 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2015-03-31T22:27:57.645Z,1427840877.645 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 1
2015-03-31T22:27:57.720Z,1427840877.720 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:57.727Z,1427840877.727 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:57.727Z,1427840877.727 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:57.752Z,1427840877.752 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:57.767Z,1427840877.767 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2015-03-31T22:27:57.767Z,1427840877.767 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2015-03-31T22:27:58.092Z,1427840878.092 [DataOverHttps](INFO): Sending 542 bytes from file Logs/20150331T221506/Express0001.lzma
2015-03-31T22:27:58.266Z,1427840878.266 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:58.268Z,1427840878.268 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:58.268Z,1427840878.268 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:58.289Z,1427840878.289 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:58.484Z,1427840878.484 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:58.487Z,1427840878.487 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:58.487Z,1427840878.487 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:58.500Z,1427840878.500 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:58.874Z,1427840878.874 [DataOverHttps](INFO): Moved sent file to Logs/20150331T221506/Express0001.lzma.bak
2015-03-31T22:27:58.884Z,1427840878.884 [DataOverHttps](INFO): SBD MOMSN=3094280
2015-03-31T22:27:59.076Z,1427840879.076 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:27:59.094Z,1427840879.094 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:27:59.100Z,1427840879.100 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:27:59.233Z,1427840879.233 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:27:59.927Z,1427840879.927 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:00.121Z,1427840880.121 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:00.388Z,1427840880.388 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:00.426Z,1427840880.426 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:28:00.427Z,1427840880.427 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:28:00.560Z,1427840880.560 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:09.832Z,1427840889.832 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:09.835Z,1427840889.835 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:28:09.835Z,1427840889.835 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:28:10.146Z,1427840890.146 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:10.844Z,1427840890.844 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:10.888Z,1427840890.888 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:28:10.894Z,1427840890.894 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:28:11.051Z,1427840891.051 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:11.852Z,1427840891.852 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:11.854Z,1427840891.854 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:28:11.854Z,1427840891.854 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:28:11.985Z,1427840891.985 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:12.346Z,1427840892.346 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:12.352Z,1427840892.352 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:28:12.353Z,1427840892.353 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:28:12.411Z,1427840892.411 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:12.904Z,1427840892.904 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:12.914Z,1427840892.914 [Rowe_600](ERROR): Ensemble number mismatch: 1350 in header, 1360 in ensemble data matrix.
2015-03-31T22:28:12.914Z,1427840892.914 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d6073]
2015-03-31T22:28:12.915Z,1427840892.915 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d60c3]
2015-03-31T22:28:12.952Z,1427840892.952 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:13.128Z,1427840893.128 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:13.130Z,1427840893.130 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d6134]
2015-03-31T22:28:13.131Z,1427840893.131 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d6184]
2015-03-31T22:28:13.172Z,1427840893.172 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:20.700Z,1427840900.700 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:20.703Z,1427840900.703 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:28:20.703Z,1427840900.703 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:28:20.744Z,1427840900.744 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:20.966Z,1427840900.966 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:20.983Z,1427840900.983 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:28:20.989Z,1427840900.989 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:28:21.139Z,1427840901.139 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:21.325Z,1427840901.325 [DataOverHttps](INFO): Sending 574 bytes from file Logs/20150331T221506/Express0005.lzma
2015-03-31T22:28:21.503Z,1427840901.503 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:21.521Z,1427840901.521 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:28:21.527Z,1427840901.527 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:28:21.581Z,1427840901.581 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:21.935Z,1427840901.935 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:21.954Z,1427840901.954 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:28:21.959Z,1427840901.959 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:28:21.986Z,1427840901.986 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:22.279Z,1427840902.279 [DataOverHttps](INFO): Moved sent file to Logs/20150331T221506/Express0005.lzma.bak
2015-03-31T22:28:22.280Z,1427840902.280 [DataOverHttps](INFO): SBD MOMSN=3094294
2015-03-31T22:28:22.370Z,1427840902.370 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:22.414Z,1427840902.414 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d63fc]
2015-03-31T22:28:22.417Z,1427840902.417 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d644c]
2015-03-31T22:28:22.582Z,1427840902.582 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:23.440Z,1427840903.440 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:23.451Z,1427840903.451 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:28:23.452Z,1427840903.452 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:28:23.513Z,1427840903.513 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:23.561Z,1427840903.561 [Default:CheckIn:Read_Iridium] Stopped
2015-03-31T22:28:23.562Z,1427840903.562 [Default:CheckIn](INFO): Completed Default:CheckIn
2015-03-31T22:28:23.562Z,1427840903.562 [Default:CheckIn] Stopped
2015-03-31T22:28:23.562Z,1427840903.562 [Default:CheckIn](INFO): Aggregate::uninitialize Default:CheckIn
2015-03-31T22:28:23.562Z,1427840903.562 [Default:CheckIn:A.SetSpeed] Stopped
2015-03-31T22:28:23.562Z,1427840903.562 [Default:CheckIn:A.SetSpeed](DEBUG): Uninitialize.
2015-03-31T22:28:23.811Z,1427840903.811 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:23.849Z,1427840903.849 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:28:23.858Z,1427840903.858 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:28:24.096Z,1427840904.096 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:37.644Z,1427840917.644 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:37.646Z,1427840917.646 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:28:37.646Z,1427840917.646 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:28:37.895Z,1427840917.895 [BPC1](ERROR): Failed to receive battery data
2015-03-31T22:28:37.896Z,1427840917.896 [BPC1] Communications Fault, FailCount= 1
2015-03-31T22:28:37.897Z,1427840917.897 [BPC1](ERROR): Communications Fault
2015-03-31T22:28:37.950Z,1427840917.950 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:38.037Z,1427840918.037 [CBIT](ERROR): Communications Fault in component: BPC1
2015-03-31T22:28:38.093Z,1427840918.093 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:38.100Z,1427840918.100 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:28:38.100Z,1427840918.100 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:28:38.126Z,1427840918.126 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:43.155Z,1427840923.155 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:43.447Z,1427840923.447 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:48.325Z,1427840928.325 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:48.326Z,1427840928.326 [Rowe_600](ERROR): first preamble found after 5323 bytes, which is more than sizeof( deviceResponse_ ) 4116
2015-03-31T22:28:48.382Z,1427840928.382 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:48.712Z,1427840928.712 [CBIT](INFO): Clearing failed state for component BPC1
2015-03-31T22:28:48.713Z,1427840928.713 [BPC1] No Fault, FailCount= 1
2015-03-31T22:28:53.082Z,1427840933.082 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:53.084Z,1427840933.084 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:28:53.084Z,1427840933.084 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:28:53.174Z,1427840933.174 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:28:58.290Z,1427840938.290 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:28:58.295Z,1427840938.295 [Rowe_600](DEBUG): 709 bytes available, but need 4084
2015-03-31T22:28:58.381Z,1427840938.381 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:29:03.189Z,1427840943.189 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:29:03.191Z,1427840943.191 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:29:03.192Z,1427840943.192 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:29:03.296Z,1427840943.296 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:29:08.083Z,1427840948.083 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:29:08.098Z,1427840948.098 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:29:13.333Z,1427840953.333 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:29:13.363Z,1427840953.363 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:29:13.364Z,1427840953.364 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:29:13.835Z,1427840953.835 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:29:18.391Z,1427840958.391 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:29:18.393Z,1427840958.393 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:29:18.393Z,1427840958.393 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:29:18.443Z,1427840958.443 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:29:23.195Z,1427840963.195 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:29:23.229Z,1427840963.229 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:29:23.239Z,1427840963.239 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:29:23.398Z,1427840963.398 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:29:28.309Z,1427840968.309 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:29:28.348Z,1427840968.348 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:29:28.348Z,1427840968.348 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:29:28.373Z,1427840968.373 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:29:33.241Z,1427840973.241 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:29:33.243Z,1427840973.243 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:29:33.244Z,1427840973.244 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:29:33.354Z,1427840973.354 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:29:44.865Z,1427840984.865 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:29:44.867Z,1427840984.867 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:29:44.868Z,1427840984.868 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:29:44.911Z,1427840984.911 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:29:45.172Z,1427840985.172 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:29:45.196Z,1427840985.196 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:29:45.197Z,1427840985.197 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:29:45.322Z,1427840985.322 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:29:50.179Z,1427840990.179 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:29:50.261Z,1427840990.261 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:29:55.173Z,1427840995.173 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:29:55.185Z,1427840995.185 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:29:55.186Z,1427840995.186 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:29:55.306Z,1427840995.306 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:30:00.169Z,1427841000.169 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:30:00.235Z,1427841000.235 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:30:05.127Z,1427841005.127 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:30:05.129Z,1427841005.129 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:30:05.129Z,1427841005.129 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:30:05.155Z,1427841005.155 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:30:10.050Z,1427841010.050 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:30:10.052Z,1427841010.052 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:30:10.053Z,1427841010.053 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:30:10.130Z,1427841010.130 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:30:15.042Z,1427841015.042 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:30:15.043Z,1427841015.043 [Rowe_600](ERROR): first preamble found after 6100 bytes, which is more than sizeof( deviceResponse_ ) 4116
2015-03-31T22:30:15.046Z,1427841015.046 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:30:15.046Z,1427841015.046 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:30:15.059Z,1427841015.059 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:30:20.156Z,1427841020.156 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:30:20.166Z,1427841020.166 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:30:20.167Z,1427841020.167 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:30:20.329Z,1427841020.329 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:30:25.274Z,1427841025.274 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:30:25.280Z,1427841025.280 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:30:25.281Z,1427841025.281 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:30:25.406Z,1427841025.406 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:30:30.047Z,1427841030.047 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:30:30.048Z,1427841030.048 [Rowe_600](ERROR): first preamble found after 6087 bytes, which is more than sizeof( deviceResponse_ ) 4116
2015-03-31T22:30:30.050Z,1427841030.050 [Rowe_600](ERROR): Only MATLAB type 10 (float32) matrices are supported, got MATLAB type 66
2015-03-31T22:30:30.066Z,1427841030.066 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:30:35.282Z,1427841035.282 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:30:35.318Z,1427841035.318 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:30:35.320Z,1427841035.320 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:30:38.803Z,1427841038.803 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:30:47.336Z,1427841047.336 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:30:47.339Z,1427841047.339 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:30:47.339Z,1427841047.339 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:30:47.369Z,1427841047.369 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:30:47.388Z,1427841047.388 [Default:UpdateAndReportMinutesSinceMissionStarted] Running Loop=1
2015-03-31T22:30:47.388Z,1427841047.388 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::initialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-03-31T22:30:47.388Z,1427841047.388 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Running Loop=1
2015-03-31T22:30:47.393Z,1427841047.393 [Default:UpdateAndReportMinutesSinceMissionStarted:A] Stopped
2015-03-31T22:30:47.393Z,1427841047.393 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Running Loop=1
2015-03-31T22:30:47.407Z,1427841047.407 [CBIT](INFO): Clearing failed count for component DropWeight
2015-03-31T22:30:47.407Z,1427841047.407 [DropWeight] No Fault, FailCount= 1
2015-03-31T22:30:47.434Z,1427841047.434 [DropWeight](CRITICAL): DROP WEIGHT MISSING.

2015-03-31T22:30:47.434Z,1427841047.434 [DropWeight] Hardware Fault, FailCount= 1
2015-03-31T22:30:47.434Z,1427841047.434 [DropWeight](ERROR): Hardware Fault
2015-03-31T22:30:47.469Z,1427841047.469 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:30:47.471Z,1427841047.471 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:30:47.471Z,1427841047.471 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:30:47.501Z,1427841047.501 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:30:47.523Z,1427841047.523 [Default:UpdateAndReportMinutesSinceMissionStarted:B](IMPORTANT): Default mission has been running for 11.797535 min 
2015-03-31T22:30:47.524Z,1427841047.524 [Default:UpdateAndReportMinutesSinceMissionStarted:B] Stopped
2015-03-31T22:30:47.524Z,1427841047.524 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Completed Default:UpdateAndReportMinutesSinceMissionStarted
2015-03-31T22:30:47.524Z,1427841047.524 [Default:UpdateAndReportMinutesSinceMissionStarted] Stopped
2015-03-31T22:30:47.524Z,1427841047.524 [Default:UpdateAndReportMinutesSinceMissionStarted](INFO): Aggregate::uninitialize Default:UpdateAndReportMinutesSinceMissionStarted
2015-03-31T22:30:47.666Z,1427841047.666 [CBIT](ERROR): Hardware Fault in component: DropWeight
2015-03-31T22:30:47.668Z,1427841047.668 [CBIT](CRITICAL): Hardware Fault in component: DropWeight
2015-03-31T22:30:52.596Z,1427841052.596 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:30:52.841Z,1427841052.841 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:30:57.572Z,1427841057.572 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:30:57.595Z,1427841057.595 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:30:57.601Z,1427841057.601 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:30:57.724Z,1427841057.724 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:31:02.595Z,1427841062.595 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:31:02.625Z,1427841062.625 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:31:02.626Z,1427841062.626 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:31:02.756Z,1427841062.756 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:31:02.780Z,1427841062.780 [DeadReckonWithRespectToSeafloor](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:31:02.780Z,1427841062.780 [DeadReckonWithRespectToSeafloor] Software Fault, FailCount= 2
2015-03-31T22:31:02.781Z,1427841062.781 [DeadReckonWithRespectToSeafloor](ERROR): Software Fault
2015-03-31T22:31:02.783Z,1427841062.783 [DeadReckonUsingDVLWaterTrack](FAULT): Will not write estimated position: latitudeAccuracy_ = nan, longitudeAccuracy_ = nan, depthAccuracy_ = nan
2015-03-31T22:31:02.783Z,1427841062.783 [DeadReckonUsingDVLWaterTrack] Software Fault, FailCount= 2
2015-03-31T22:31:02.783Z,1427841062.783 [DeadReckonUsingDVLWaterTrack](ERROR): Software Fault
2015-03-31T22:31:02.797Z,1427841062.797 [CBIT](ERROR): Software Fault in component: DeadReckonWithRespectToSeafloor
2015-03-31T22:31:02.797Z,1427841062.797 [CBIT](ERROR): Software Fault in component: DeadReckonUsingDVLWaterTrack
2015-03-31T22:31:07.584Z,1427841067.584 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:31:07.606Z,1427841067.606 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:31:07.608Z,1427841067.608 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:31:07.717Z,1427841067.717 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:31:07.879Z,1427841067.879 [CBIT](INFO): Clearing failed state for component DeadReckonWithRespectToSeafloor
2015-03-31T22:31:07.880Z,1427841067.880 [DeadReckonWithRespectToSeafloor] No Fault, FailCount= 2
2015-03-31T22:31:07.888Z,1427841067.888 [CBIT](INFO): Clearing failed state for component DeadReckonUsingDVLWaterTrack
2015-03-31T22:31:07.893Z,1427841067.893 [DeadReckonUsingDVLWaterTrack] No Fault, FailCount= 2
2015-03-31T22:31:12.564Z,1427841072.564 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:31:12.567Z,1427841072.567 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:31:12.567Z,1427841072.567 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:31:12.576Z,1427841072.576 [BPC1](DEBUG): Received data from all battery sticks
2015-03-31T22:31:12.583Z,1427841072.583 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:31:12.591Z,1427841072.591 [DeadReckonWithRespectToSeafloor](DEBUG): Initializing DeadReckonWithRespectToSeafloor component.
2015-03-31T22:31:12.591Z,1427841072.591 [DeadReckonUsingDVLWaterTrack](DEBUG): Initializing DeadReckonUsingDVLWaterTrack component.
2015-03-31T22:31:17.566Z,1427841077.566 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:31:17.569Z,1427841077.569 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:31:17.569Z,1427841077.569 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:31:17.582Z,1427841077.582 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:31:22.645Z,1427841082.645 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:31:22.708Z,1427841082.708 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:31:22.709Z,1427841082.709 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:31:23.304Z,1427841083.304 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:31:27.523Z,1427841087.523 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:31:27.769Z,1427841087.769 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:31:32.454Z,1427841092.454 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:31:32.457Z,1427841092.457 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:31:32.457Z,1427841092.457 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:31:32.510Z,1427841092.510 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:31:37.546Z,1427841097.546 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:31:37.549Z,1427841097.549 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:31:37.549Z,1427841097.549 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:31:37.570Z,1427841097.570 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:31:48.732Z,1427841108.732 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:31:48.742Z,1427841108.742 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:31:48.743Z,1427841108.743 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:31:48.902Z,1427841108.902 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:31:49.224Z,1427841109.224 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:31:49.443Z,1427841109.443 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:31:54.234Z,1427841114.234 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:31:54.258Z,1427841114.258 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:31:54.259Z,1427841114.259 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:31:54.392Z,1427841114.392 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:31:59.109Z,1427841119.109 [DataOverHttps](IMPORTANT): SBD MTMSN=20150331T222508
2015-03-31T22:31:59.298Z,1427841119.298 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:31:59.326Z,1427841119.326 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:31:59.326Z,1427841119.326 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:32:03.931Z,1427841123.931 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:32:04.296Z,1427841124.296 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:32:04.302Z,1427841124.302 [Rowe_600](ERROR): Ensemble number mismatch: 1712 in header, 1720 in ensemble data matrix.
2015-03-31T22:32:04.302Z,1427841124.302 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d63f7]
2015-03-31T22:32:04.303Z,1427841124.303 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d6447]
2015-03-31T22:32:04.339Z,1427841124.339 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:32:09.297Z,1427841129.297 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:32:09.300Z,1427841129.300 [Rowe_600](ERROR): Ensemble number mismatch: 1722 in header, 1729 in ensemble data matrix.
2015-03-31T22:32:09.308Z,1427841129.308 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d60cb]
2015-03-31T22:32:09.308Z,1427841129.308 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d611b]
2015-03-31T22:32:09.358Z,1427841129.358 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:32:20.797Z,1427841140.797 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:32:20.801Z,1427841140.801 [Rowe_600](ERROR): Ensemble number mismatch: 1731 in header, 1738 in ensemble data matrix.
2015-03-31T22:32:20.801Z,1427841140.801 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d62e5]
2015-03-31T22:32:20.801Z,1427841140.801 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d6335]
2015-03-31T22:32:20.842Z,1427841140.842 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:32:21.022Z,1427841141.022 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:32:21.046Z,1427841141.046 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:32:21.051Z,1427841141.051 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:32:21.200Z,1427841141.200 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:32:25.967Z,1427841145.967 [DataOverHttps](INFO): Received command:restart app
2015-03-31T22:32:26.020Z,1427841146.020 [CommandLine](IMPORTANT): got command restart application
2015-03-31T22:32:26.238Z,1427841146.238 [Rowe_600](DEBUG): LCB error: Software Overcurrent.
2015-03-31T22:32:26.256Z,1427841146.256 [Rowe_600](ERROR): first preamble found after 7132 bytes, which is more than sizeof( deviceResponse_ ) 4116
2015-03-31T22:32:26.293Z,1427841146.293 [Rowe_600](DEBUG): reading 13-by-1 MATv4 matrix named E000009 from address [0x3d64ac]
2015-03-31T22:32:26.299Z,1427841146.299 [Rowe_600](DEBUG): reading 54-by-1 MATv4 matrix named E000010 from address [0x3d64fc]
2015-03-31T22:32:26.553Z,1427841146.553 [HFRCMReconstructedInterpolator](DEBUG): no valid forecast
2015-03-31T22:32:27.039Z,1427841147.039 [CommandLine ThreadHandler](INFO): Uninitializing protected caller thread.
2015-03-31T22:32:27.039Z,1427841147.039 [CommandLine ThreadHandler](INFO): Thread cancelled.
2015-03-31T22:32:27.204Z,1427841147.204 [Supervisor](DEBUG): Uninitializing supervisor and starting cleanup.  Bye!
2015-03-31T22:32:27.204Z,1427841147.204 [CommandLine ThreadHandler](INFO): Thread cancelled.
2015-03-31T22:32:27.205Z,1427841147.205 [CommandLine](INFO): Join timeout helper Thread ID is 926
2015-03-31T22:32:27.205Z,1427841147.205 [ComponentRegistry](INFO): Shutting down NavChartDb ThreadHandler
2015-03-31T22:32:27.205Z,1427841147.205 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2015-03-31T22:32:27.206Z,1427841147.206 [NavChartDb](INFO): Join timeout helper Thread ID is 927
2015-03-31T22:32:27.296Z,1427841147.296 [NavChartDb ThreadHandler](INFO): Uninitializing protected caller thread.
2015-03-31T22:32:27.297Z,1427841147.297 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2015-03-31T22:32:27.308Z,1427841147.308 [ComponentRegistry](INFO): Shutting down Radio_Surface ThreadHandler
2015-03-31T22:32:27.308Z,1427841147.308 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2015-03-31T22:32:27.309Z,1427841147.309 [Radio_Surface](INFO): Join timeout helper Thread ID is 928
2015-03-31T22:32:27.344Z,1427841147.344 [Radio_Surface ThreadHandler](INFO): Uninitializing protected caller thread.
2015-03-31T22:32:27.345Z,1427841147.345 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2015-03-31T22:32:27.348Z,1427841147.348 [ComponentRegistry](INFO): Shutting down logger ThreadHandler
2015-03-31T22:32:27.348Z,1427841147.348 [logger ThreadHandler](INFO): Thread cancelled.
2015-03-31T22:32:27.349Z,1427841147.349 [logger](INFO): Join timeout helper Thread ID is 929
2015-03-31T22:32:27.372Z,1427841147.372 [logger ThreadHandler](INFO): Uninitializing protected caller thread.
2015-03-31T22:32:27.373Z,1427841147.373 [logger ThreadHandler](INFO): Thread cancelled.
2015-03-31T22:32:27.388Z,1427841147.388 [ComponentRegistry](INFO): Shutting down CommandLine ThreadHandler
2015-03-31T22:32:27.388Z,1427841147.388 [CommandLine ThreadHandler](INFO): Thread cancelled.
2015-03-31T22:32:27.388Z,1427841147.388 [ComponentRegistry](INFO): Shutting down controlThread ThreadHandler
2015-03-31T22:32:27.388Z,1427841147.388 [controlThread ThreadHandler](INFO): Thread cancelled.
2015-03-31T22:32:27.389Z,1427841147.389 [controlThread](INFO): Join timeout helper Thread ID is 930
2015-03-31T22:32:30.894Z,1427841150.894 [controlThread ThreadHandler](INFO): Uninitializing protected caller thread.
2015-03-31T22:32:30.894Z,1427841150.894 [controlThread](DEBUG): Uninitializing ControlThread
2015-03-31T22:32:30.898Z,1427841150.898 [NAL9602](INFO): Powering down
2015-03-31T22:32:30.899Z,1427841150.899 [PNI_TCM](INFO): Powering down
2015-03-31T22:32:30.986Z,1427841150.986 [Rowe_600](INFO): Powering down
2015-03-31T22:32:31.060Z,1427841151.060 [DepthRateCalculator](DEBUG): Initializing DepthRateCalculator.
2015-03-31T22:32:31.062Z,1427841151.062 [NavChart](DEBUG): Uninitialize NavChart Navigation.
2015-03-31T22:32:31.062Z,1427841151.062 [Default] Stopped
2015-03-31T22:32:31.062Z,1427841151.062 [Default](INFO): Aggregate::uninitialize Default
2015-03-31T22:32:31.062Z,1427841151.062 [Default:B.GoToSurface] Stopped
2015-03-31T22:32:31.062Z,1427841151.062 [Default:B.GoToSurface](DEBUG): Uninitialize GoToSurfaceComponent.
2015-03-31T22:32:31.063Z,1427841151.063 [Default:WaitAtTheSurface] Stopped
2015-03-31T22:32:31.063Z,1427841151.063 [Default:WaitAtTheSurface](INFO): Aggregate::uninitialize Default:WaitAtTheSurface
2015-03-31T22:32:31.063Z,1427841151.063 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed] Stopped
2015-03-31T22:32:31.063Z,1427841151.063 [Default:WaitAtTheSurface:RunApplicationAtLowSpeed.SetSpeed](DEBUG): Uninitialize.
2015-03-31T22:32:31.067Z,1427841151.067 [VerticalControl](DEBUG): Uninitialize VerticalControlComponent.
2015-03-31T22:32:31.067Z,1427841151.067 [HorizontalControl](DEBUG): Uninitialize HorizontalControlComponent.
2015-03-31T22:32:31.067Z,1427841151.067 [SpeedControl](DEBUG): Uninitialize SpeedControlComponent.
2015-03-31T22:32:31.068Z,1427841151.068 [LoopControl](DEBUG): Uninitialize LoopControlComponent.
2015-03-31T22:32:31.068Z,1427841151.068 [BuoyancyServo](DEBUG): Uninitialize Buoyancy Servo.
2015-03-31T22:32:31.068Z,1427841151.068 [ElevatorServo](DEBUG): Uninitialize Elevator Servo.
2015-03-31T22:32:31.069Z,1427841151.069 [MassServo](DEBUG): Uninitialize Mass Servo.
2015-03-31T22:32:31.069Z,1427841151.069 [RudderServo](DEBUG): Uninitialize Rudder Servo.
2015-03-31T22:32:31.069Z,1427841151.069 [ThrusterServo](DEBUG): Uninitialize Thruster Servo.
2015-03-31T22:32:31.069Z,1427841151.069 [SBIT](DEBUG): Uninitialize SBIT Component.
2015-03-31T22:32:31.070Z,1427841151.070 [IBIT](DEBUG): Uninitialize IBIT Component.
2015-03-31T22:32:31.070Z,1427841151.070 [CBIT](DEBUG): Uninitialize CBIT Component.
2015-03-31T22:32:31.103Z,1427841151.103 [controlThread ThreadHandler](INFO): Thread cancelled.
2015-03-31T22:32:31.221Z,1427841151.221 [Radio_Surface ThreadHandler](INFO): Thread cancelled.
2015-03-31T22:32:31.263Z,1427841151.263 [NavChartDb ThreadHandler](INFO): Thread cancelled.
2015-03-31T22:32:31.326Z,1427841151.326 [logger ThreadHandler](INFO): Thread cancelled.