galene Path

trajectory

20250628T054832 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250628T054834 [CTD_Seabird]:Device message queue exceeded the allowed limit.

20250628T055107 [CommandExec]:got command gfscan

20250628T055107 [GFScanner]:Beginning ground fault scan

20250628T055148 [CommandExec]:got command ! echo i > /dev/loadB2

20250628T055151 [CommandExec]:got command gfscan

20250628T055151 [GFScanner]:Beginning ground fault scan

20250628T055152 [DAT]:LCB fault: Current Limiter Activated.

20250628T055152 [DAT]:Hardware Fault

20250628T055152 [CBIT]:Hardware Fault in component: DAT

20250628T055153 [DAT]:LCB fault: Current Limiter Activated.

20250628T055226 [CommandExec]:got command ! echo i > /dev/loadB7

20250628T055230 [CommandExec]:got command ! echo i > /dev/loadB2

20250628T055232 [CommandExec]:got command gfscan

20250628T055232 [GFScanner]:Beginning ground fault scan

20250628T055254 [CommandExec]:got command gfisolate

20250628T055254 [GFScanner]:Starting ground fault isolation process

20250628T055256 [DAT]:failed to initialize, no bytes available on serial interface

20250628T055256 [DAT]:Communications Fault

20250628T055256 [CBIT]:Communications Fault in component: DAT

20250628T055256 [DAT]:LCB fault: Hardware Overcurrent Shutdown. Current Limiter Activated.

20250628T055256 [DAT]:Hardware Fault

20250628T055339 [GFScanner]:Error reading 24V bus power status. Assuming off for scan purposes.

20250628T055343 [GFScanner]:Ground fault on channel B2 (3.15bV) reduced by 0.011960 mA after isolating DAT

20250628T055343 [GFScanner]:Ground fault identified in component: DAT

20250628T055344 [GFScanner]:Ground fault identified in component DAT, leaving it isolated and continuing to next component

20250628T055344 [GFScanner]:Skipping component Depth_Keller, isolate manually if desired

20250628T055356 [GFScanner]:Error reading 24V bus power status. Assuming off for scan purposes.

20250628T055412 [GFScanner]:Error reading 24V bus power status. Assuming off for scan purposes.

20250628T055433 [GFScanner]:Skipping component Power24vConverter, isolate manually if desired

20250628T055505 [GFScanner]:Ground fault on channel A3 (5V) reduced by 0.010702 mA after isolating CTD_Seabird

20250628T055505 [GFScanner]:Ground fault identified in component: CTD_Seabird

20250628T055506 [GFScanner]:Ground fault identified in component CTD_Seabird, leaving it isolated and continuing to next component

20250628T055506 [CTD_Seabird]:Hardware Fault

20250628T055506 [CBIT]:Hardware Fault in component: CTD_Seabird

20250628T055508 [Default:CheckIn:E]:Default mission has been running for 8.084824 min

20250628T055621 [GFScanner]:Ground fault on channel A2 (12V) reduced by 0.036572 mA after isolating ElevatorServo

20250628T055621 [GFScanner]:Ground fault on channel A3 (5V) reduced by 0.023134 mA after isolating ElevatorServo

20250628T055621 [GFScanner]:Ground fault on channel B0 (3.3V) reduced by 0.011389 mA after isolating ElevatorServo

20250628T055621 [GFScanner]:Ground fault on channel B1 (3.15aV) reduced by 0.012931 mA after isolating ElevatorServo

20250628T055621 [GFScanner]:Ground fault on channel B2 (3.15bV) reduced by 0.015044 mA after isolating ElevatorServo

20250628T055621 [GFScanner]:Ground fault identified in component: ElevatorServo

20250628T055621 [GFScanner]:Ground fault identified in component ElevatorServo, leaving it isolated and continuing to next component

20250628T055621 [ElevatorServo]:Hardware Fault

20250628T055621 [CBIT]:Hardware Fault in component: ElevatorServo

20250628T055710 [GFScanner]:Ground fault isolation complete. Any identified components with ground faults have been left isolated.

20250628T055710 [GFScanner]:Ground fault isolation process complete

20250628T055711 [DAT]:LCB fault: Hardware Overcurrent Shutdown. Current Limiter Activated.

20250628T055711 [DAT]:Hardware Fault

20250628T055714 [CBIT]:Hardware Fault in component: DAT

20250628T055718 [CTD_Seabird]:Device message queue exceeded the allowed limit.

20250628T055846 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250628T060204 [CommandExec]:got command schedule

20250628T060204 [CommandExec]:Nothing is scheduled

20250628T060224 [CommandExec]:got command schedule pause

20250628T060224 [CommandExec]:Scheduling is paused

20250628T060409 [Default:CheckIn:E]:Default mission has been running for 17.097288 min

20250628T060427 [CommandExec]:got command schedule 20250628T110000 "load Science/sci2_noyo_optim.tl;set sci2_noyo_optim.MissionTimeout 240 min;set sci2_noyo_optim.NeedCommsTime 240 min;set sci2_noyo_optim.Depth1 250 m;set sci2_noyo_optim.Repeat 500 count" 3gji5 1 4.000000

20250628T060427 [CommandExec]:Scheduling command #1 of 4 with id=3gji5

20250628T060427 [CommandExec]:Scheduled #1 (#1 of 4 with id='3gji5'): "load Science/sci2_noyo_optim.tl;set sci2_noyo_optim.MissionTimeout 240 min;set sci2_noyo_optim.NeedCommsTime 240 min;set sci2_noyo_optim.Depth1 250 m;set sci2_noyo_optim.Repeat 500 count", AT TIME: 2025-06-28T11:00:00Z

20250628T060427 [CommandExec]:Scheduling was paused by a command at 2025-06-28T06:02:24Z

20250628T060445 [CommandExec]:got command schedule 20250628T110000 "set sci2_noyo_optim.Lat1 36.73594 degree;set sci2_noyo_optim.Lon1 -122.02094 degree;set sci2_noyo_optim.Lat2 36.73594 degree;set sci2_noyo_optim.Lon2 -122.02429 degree;set sci2_noyo_optim.Lat3 36.7371 degree" 3gji5 2 4.000000

20250628T060445 [CommandExec]:Scheduling command #2 of 4 with id=3gji5

20250628T060445 [CommandExec]:Scheduled #2 (#2 of 4 with id='3gji5'): "set sci2_noyo_optim.Lat1 36.73594 degree;set sci2_noyo_optim.Lon1 -122.02094 degree;set sci2_noyo_optim.Lat2 36.73594 degree;set sci2_noyo_optim.Lon2 -122.02429 degree;set sci2_noyo_optim.Lat3 36.7371 degree", AT TIME: 2025-06-28T11:00:00Z

20250628T060445 [CommandExec]:Scheduling was paused by a command at 2025-06-28T06:02:24Z

20250628T060505 [CommandExec]:got command schedule 20250628T110000 "set sci2_noyo_optim.Lon3 -122.02429 degree;set sci2_noyo_optim.Lat4 36.73703 degree;set sci2_noyo_optim.Lon4 -122.02094 degree;set sci2_noyo_optim.Lat5 36.73594 degree;set sci2_noyo_optim.Lon5 -122.02094 degree" 3gji5 3 4.000000

20250628T060505 [CommandExec]:Scheduling command #3 of 4 with id=3gji5

20250628T060505 [CommandExec]:Scheduled #3 (#3 of 4 with id='3gji5'): "set sci2_noyo_optim.Lon3 -122.02429 degree;set sci2_noyo_optim.Lat4 36.73703 degree;set sci2_noyo_optim.Lon4 -122.02094 degree;set sci2_noyo_optim.Lat5 36.73594 degree;set sci2_noyo_optim.Lon5 -122.02094 degree", AT TIME: 2025-06-28T11:00:00Z

20250628T060505 [CommandExec]:Scheduling was paused by a command at 2025-06-28T06:02:24Z

20250628T060523 [CommandExec]:got command schedule 20250628T110000 "set sci2_noyo_optim.ApproachDepthTimeout 35 min;set sci2_noyo_optim.SlowSpeed 0.5 m/s;set sci2_noyo_optim.BuoyancyNeutral 280 cc;set sci2_noyo_optim.MaxDepth 265 m;set sci2_noyo_optim:NeedComms.SurfacingTimeout 1500 s;run" 3gji5 4 4.000000

20250628T060523 [CommandExec]:Scheduled #4 (#4 of 4 with id='3gji5'): "set sci2_noyo_optim.ApproachDepthTimeout 35 min;set sci2_noyo_optim.SlowSpeed 0.5 m/s;set sci2_noyo_optim.BuoyancyNeutral 280 cc;set sci2_noyo_optim.MaxDepth 265 m;set sci2_noyo_optim:NeedComms.SurfacingTimeout 1500 s;run", AT TIME: 2025-06-28T11:00:00Z

20250628T060542 [CommandExec]:got command schedule 20250628T150000 "load Science/sci2_noyo_optim.tl;set sci2_noyo_optim.MissionTimeout 10 h;set sci2_noyo_optim.NeedCommsTime 60 min;set sci2_noyo_optim.Depth1 250 m;set sci2_noyo_optim.Repeat 500 count;set sci2_noyo_optim.Lat1 36.73594 degree" 3gjjg 1 4.000000

20250628T060542 [CommandExec]:Scheduling command #1 of 4 with id=3gjjg

20250628T060542 [CommandExec]:Scheduled #5 (#1 of 4 with id='3gjjg'): "load Science/sci2_noyo_optim.tl;set sci2_noyo_optim.MissionTimeout 10 h;set sci2_noyo_optim.NeedCommsTime 60 min;set sci2_noyo_optim.Depth1 250 m;set sci2_noyo_optim.Repeat 500 count;set sci2_noyo_optim.Lat1 36.73594 degree", AT TIME: 2025-06-28T15:00:00Z

20250628T060555 [CommandExec]:got command get depth

20250628T060604 [CommandExec]:got command schedule 20250628T150000 "set sci2_noyo_optim.Lon1 -122.02094 degree;set sci2_noyo_optim.Lat2 36.73594 degree;set sci2_noyo_optim.Lon2 -122.02429 degree;set sci2_noyo_optim.Lat3 36.7371 degree;set sci2_noyo_optim.Lon3 -122.02429 degree" 3gjjg 2 4.000000

20250628T060604 [CommandExec]:Scheduling command #2 of 4 with id=3gjjg

20250628T060604 [CommandExec]:Scheduled #6 (#2 of 4 with id='3gjjg'): "set sci2_noyo_optim.Lon1 -122.02094 degree;set sci2_noyo_optim.Lat2 36.73594 degree;set sci2_noyo_optim.Lon2 -122.02429 degree;set sci2_noyo_optim.Lat3 36.7371 degree;set sci2_noyo_optim.Lon3 -122.02429 degree", AT TIME: 2025-06-28T15:00:00Z

20250628T060622 [CommandExec]:got command schedule 20250628T150000 "set sci2_noyo_optim.Lat4 36.73703 degree;set sci2_noyo_optim.Lon4 -122.02094 degree;set sci2_noyo_optim.Lat5 36.73594 degree;set sci2_noyo_optim.Lon5 -122.02094 degree;set sci2_noyo_optim.ApproachDepthTimeout 35 min" 3gjjg 3 4.000000

20250628T060622 [CommandExec]:Scheduling command #3 of 4 with id=3gjjg

20250628T060622 [CommandExec]:Scheduled #7 (#3 of 4 with id='3gjjg'): "set sci2_noyo_optim.Lat4 36.73703 degree;set sci2_noyo_optim.Lon4 -122.02094 degree;set sci2_noyo_optim.Lat5 36.73594 degree;set sci2_noyo_optim.Lon5 -122.02094 degree;set sci2_noyo_optim.ApproachDepthTimeout 35 min", AT TIME: 2025-06-28T15:00:00Z

20250628T060641 [CommandExec]:got command schedule 20250628T150000 "set sci2_noyo_optim.SlowSpeed 0.5 m/s;set sci2_noyo_optim.BuoyancyNeutral 280 cc;set sci2_noyo_optim.MaxDepth 265 m;set sci2_noyo_optim:NeedComms.SurfacingTimeout 1500 s;run" 3gjjg 4 4.000000

20250628T060641 [CommandExec]:Scheduled #8 (#4 of 4 with id='3gjjg'): "set sci2_noyo_optim.SlowSpeed 0.5 m/s;set sci2_noyo_optim.BuoyancyNeutral 280 cc;set sci2_noyo_optim.MaxDepth 265 m;set sci2_noyo_optim:NeedComms.SurfacingTimeout 1500 s;run", AT TIME: 2025-06-28T15:00:00Z

20250628T060700 [CommandExec]:got command schedule asap "load Science/sci2_noyo_optim.tl;set sci2_noyo_optim.MissionTimeout 6 h;set sci2_noyo_optim.NeedCommsTime 60 min;set sci2_noyo_optim.Depth1 250 m;set sci2_noyo_optim.Repeat 500 count;set sci2_noyo_optim.Lat1 36.73594 degree" 3gjkf 1 4.000000

20250628T060700 [CommandExec]:Scheduling command #1 of 4 with id=3gjkf

20250628T060700 [CommandExec]:Scheduled #9 (#1 of 4 with id='3gjkf'): "load Science/sci2_noyo_optim.tl;set sci2_noyo_optim.MissionTimeout 6 h;set sci2_noyo_optim.NeedCommsTime 60 min;set sci2_noyo_optim.Depth1 250 m;set sci2_noyo_optim.Repeat 500 count;set sci2_noyo_optim.Lat1 36.73594 degree", ASAP

20250628T060719 [CommandExec]:got command schedule asap "set sci2_noyo_optim.Lon1 -122.02094 degree;set sci2_noyo_optim.Lat2 36.73594 degree;set sci2_noyo_optim.Lon2 -122.02429 degree;set sci2_noyo_optim.Lat3 36.7371 degree;set sci2_noyo_optim.Lon3 -122.02429 degree" 3gjkf 2 4.000000

20250628T060719 [CommandExec]:Scheduling command #2 of 4 with id=3gjkf

20250628T060719 [CommandExec]:Scheduled #10 (#2 of 4 with id='3gjkf'): "set sci2_noyo_optim.Lon1 -122.02094 degree;set sci2_noyo_optim.Lat2 36.73594 degree;set sci2_noyo_optim.Lon2 -122.02429 degree;set sci2_noyo_optim.Lat3 36.7371 degree;set sci2_noyo_optim.Lon3 -122.02429 degree", ASAP

20250628T060738 [CommandExec]:got command schedule asap "set sci2_noyo_optim.Lat4 36.73703 degree;set sci2_noyo_optim.Lon4 -122.02094 degree;set sci2_noyo_optim.Lat5 36.73594 degree;set sci2_noyo_optim.Lon5 -122.02094 degree;set sci2_noyo_optim.ApproachDepthTimeout 35 min" 3gjkf 3 4.000000

20250628T060738 [CommandExec]:Scheduling command #3 of 4 with id=3gjkf

20250628T060738 [CommandExec]:Scheduled #11 (#3 of 4 with id='3gjkf'): "set sci2_noyo_optim.Lat4 36.73703 degree;set sci2_noyo_optim.Lon4 -122.02094 degree;set sci2_noyo_optim.Lat5 36.73594 degree;set sci2_noyo_optim.Lon5 -122.02094 degree;set sci2_noyo_optim.ApproachDepthTimeout 35 min", ASAP

20250628T060757 [CommandExec]:got command schedule asap "set sci2_noyo_optim.SlowSpeed 0.5 m/s;set sci2_noyo_optim.BuoyancyNeutral 280 cc;set sci2_noyo_optim.MaxDepth 265 m;set sci2_noyo_optim:NeedComms.SurfacingTimeout 1500 s;run" 3gjkf 4 4.000000

20250628T060757 [CommandExec]:Scheduled #12 (#4 of 4 with id='3gjkf'): "set sci2_noyo_optim.SlowSpeed 0.5 m/s;set sci2_noyo_optim.BuoyancyNeutral 280 cc;set sci2_noyo_optim.MaxDepth 265 m;set sci2_noyo_optim:NeedComms.SurfacingTimeout 1500 s;run", ASAP

20250628T060757 [CommandExec]:got command load ./Missions/Science/sci2_noyo_optim.tl

20250628T060814 [CommandExec]:Loaded ./Missions/Science/sci2_noyo_optim.tl id=sci2_noyo_optim

20250628T060843 [CommandExec]:got command set sci2_noyo_optim.MissionTimeout 6 hour

20250628T060843 [CommandExec]:got command set sci2_noyo_optim.NeedCommsTime 60 minute

20250628T060843 [CommandExec]:got command set sci2_noyo_optim.Depth1 250 meter

20250628T060843 [CommandExec]:got command set sci2_noyo_optim.Repeat 500 count

20250628T060843 [CommandExec]:got command set sci2_noyo_optim.Lat1 36.73594 degree

20250628T060904 [CommandExec]:got command set sci2_noyo_optim.Lon1 -122.02094 degree

20250628T060904 [CommandExec]:got command set sci2_noyo_optim.Lat2 36.73594 degree

20250628T060904 [CommandExec]:got command set sci2_noyo_optim.Lon2 -122.02429 degree

20250628T060904 [CommandExec]:got command set sci2_noyo_optim.Lat3 36.7371 degree

20250628T060904 [CommandExec]:got command set sci2_noyo_optim.Lon3 -122.02429 degree

20250628T060904 [CommandExec]:got command schedule resume

20250628T060904 [CommandExec]:Scheduling is resumed

20250628T060930 [CommandExec]:got command set sci2_noyo_optim.ApproachDepthTimeout 35 minute

20250628T061002 [CommandExec]:got command set sci2_noyo_optim.SlowSpeed 0.5 meter_per_second

20250628T061002 [CommandExec]:got command set sci2_noyo_optim.BuoyancyNeutral 280 cubic_centimeter

20250628T061002 [CommandExec]:got command set sci2_noyo_optim.MaxDepth 265 meter

20250628T061002 [CommandExec]:got command set sci2_noyo_optim:NeedComms.SurfacingTimeout 1500 second

20250628T061002 [CommandExec]:got command run

20250628T061002 [CommandExec]:Running

20250628T061002 [MissionManager]:Started mission sci2_noyo_optim

20250628T061006 [CTD_Seabird]:Salinity reading out of range: 67.164825 psu

20250628T061028 [NAL9602]:Failed to initiate SBD session. Error code: 2

20250628T062044 [CommandExec]:got command show stack

20250628T062044 [CommandExec]:Behavior Stack:#

20250628T062044 [sci2_noyo_optim:Science]:Priority 0: sci2_noyo_optim:Science:B

20250628T062044 [sci2_noyo_optim:Science]:Priority 1: sci2_noyo_optim:Science:C

20250628T062044 [sci2_noyo_optim:Science]:Priority 2: sci2_noyo_optim:Science:E

20250628T062044 [sci2_noyo_optim:Science:OceanCurrent]:Priority 3: sci2_noyo_optim:Science:OceanCurrent:A.

20250628T062044 [sci2_noyo_optim:StandardEnvelopes]:Priority 4: sci2_noyo_optim:StandardEnvelopes:A.AltitudeEnvelope

20250628T062044 [sci2_noyo_optim:StandardEnvelopes]:Priority 5: sci2_noyo_optim:StandardEnvelopes:B.DepthEnvelope

20250628T062044 [sci2_noyo_optim:StandardEnvelopes]:Priority 6: sci2_noyo_optim:StandardEnvelopes:C.OffshoreEnvelope

20250628T062044 [sci2_noyo_optim:NeedComms]:Priority 7: sci2_noyo_optim:NeedComms:B.GoToSurface

20250628T062044 [sci2_noyo_optim:NeedComms]:Priority 8: sci2_noyo_optim:NeedComms:D

20250628T062044 [sci2_noyo_optim:BackseatDriver]:Priority 9: sci2_noyo_optim:BackseatDriver:A.BackseatDriver

20250628T062044 [sci2_noyo_optim:PowerOnly]:Priority 10: sci2_noyo_optim:PowerOnly:E.Wait

20250628T062044 [sci2_noyo_optim]:Priority 11: sci2_noyo_optim:L

20250628T062044 [sci2_noyo_optim]:Priority 12: sci2_noyo_optim:M.Buoyancy

20250628T062044 [sci2_noyo_optim:SetRecording]:Priority 13: sci2_noyo_optim:SetRecording:A

20250628T062044 [sci2_noyo_optim:SetRecording]:Priority 14: sci2_noyo_optim:SetRecording:B

20250628T062341 [sci2_noyo_optim:Lap:DepthByLap:Wpt1:A.Waypoint]:Navigating to waypoint: 36.735939,-122.020943

20250628T062348 [ThrusterHE]:Zero Speed Commanded.

20250628T062454 [ThrusterHE]:Zero Speed Commanded.

20250628T062842 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20250628T063006 [ThrusterHE]:Zero Speed Commanded.

20250628T064211 [BackseatComponent]:ikshana: running backseat application.

20250628T065743 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20250628T070400 [CTD_Seabird]:Failed to parse device response: 251.42,8.8249,3#

20250628T070530 [CTD_Seabird]:Failed to parse device response: 35,1440.67#

20250628T072346 [sci2_noyo_optim:Lap:DepthByLap:Wpt1:A.Waypoint]:Reached waypoint: 36.735939,-122.020943

20250628T072346 [sci2_noyo_optim:Lap:DepthByLap:Wpt2:A.Waypoint]:Navigating to waypoint: 36.735939,-122.024292

20250628T074210 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20250628T074433 [sci2_noyo_optim:Lap:DepthByLap:Wpt2:A.Waypoint]:Reached waypoint: 36.735939,-122.024292

20250628T074433 [sci2_noyo_optim:Lap:DepthByLap:Wpt3:A.Waypoint]:Navigating to waypoint: 36.737099,-122.024292

20250628T075134 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20250628T080503 [BackseatComponent]:ikshana: running backseat application.

20250628T080509 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20250628T081001 [sci2_noyo_optim:Lap:DepthByLap:Wpt3:A.Waypoint]:Reached waypoint: 36.737099,-122.024292

20250628T090406 [CTD_Seabird]:Failed to parse device response: 0.34.62#

20250628T090427 [NAL9602]:Failed to receive proper response when querying signal strength for MT queue check.

20250628T090859 [NAL9602]:MT Queue status failed to be acquired within timeout. Will not retry this session.

20250628T091004 [NAL9602]:Queried for signal strength and failed to receive proper response.

20250628T091004 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20250628T093041 [BackseatComponent]:ikshana: running backseat application.

20250628T093655 [CTD_Seabird]:Failed to parse device response: 8,3.62601,1452.87#

20250628T101207 [RudderServo]:getPosition uart error serial timeout

20250628T101207 [RudderServo]:Rudder uart error - getPosition..serial timeout

20250628T101207 [RudderServo]:Communications Fault

20250628T101207 [CBIT]:Communications Fault in component: RudderServo

20250628T103226 [NAL9602]:Inadequate Iridium signal strength reported: 0

20250628T103230 [NAL9602]:Inadequate Iridium signal strength reported: 0

20250628T103239 [NAL9602]:Inadequate Iridium signal strength reported: 0

20250628T110000 [CommandExec]:got command load ./Missions/Science/sci2_noyo_optim.tl

20250628T110013 [CommandExec]:Loaded ./Missions/Science/sci2_noyo_optim.tl id=sci2_noyo_optim

20250628T110014 [MissionManager]:Started mission Default

20250628T110033 [CommandExec]:got command set sci2_noyo_optim.MissionTimeout 240 minute

20250628T110033 [CommandExec]:got command set sci2_noyo_optim.NeedCommsTime 240 minute

20250628T110033 [CommandExec]:got command set sci2_noyo_optim.Depth1 250 meter

20250628T110033 [CommandExec]:got command set sci2_noyo_optim.Repeat 500 count

20250628T110141 [CommandExec]:got command set sci2_noyo_optim.ApproachDepthTimeout 35 minute

20250628T110141 [CommandExec]:got command set sci2_noyo_optim.SlowSpeed 0.5 meter_per_second

20250628T110141 [CommandExec]:got command set sci2_noyo_optim.BuoyancyNeutral 280 cubic_centimeter

20250628T110141 [CommandExec]:got command set sci2_noyo_optim.MaxDepth 265 meter

20250628T110141 [CommandExec]:got command set sci2_noyo_optim:NeedComms.SurfacingTimeout 1500 second

20250628T110141 [CommandExec]:got command run

20250628T110141 [CommandExec]:Running

20250628T110141 [MissionManager]:Started mission sci2_noyo_optim

20250628T122240 [CTD_Seabird]:Failed to parse device response: 251510.79#

20250628T123448 [BPC1]:BPC1B failed to parse battery data due to unrecognized msg size.

20250628T131927 [CTD_Seabird]:Failed to parse device response: .88#

20250628T142918 [CTD_Seabird]:Failed to parse device response: 1,3.62931,1432.92#

20250628T144656 [BPC1]:BPC1B: No match for serial number 1717 in BPC1B's battery stick inventory (sticks 32-62 in onboard configuration file).

20250628T150000 [CommandExec]:got command load ./Missions/Science/sci2_noyo_optim.tl

20250628T150013 [CommandExec]:Loaded ./Missions/Science/sci2_noyo_optim.tl id=sci2_noyo_optim

20250628T150014 [MissionManager]:Started mission Default

20250628T150037 [CommandExec]:got command set sci2_noyo_optim.MissionTimeout 10 hour

20250628T150037 [CommandExec]:got command set sci2_noyo_optim.NeedCommsTime 60 minute

20250628T150037 [CommandExec]:got command set sci2_noyo_optim.Depth1 250 meter

20250628T150037 [CommandExec]:got command set sci2_noyo_optim.Repeat 500 count

20250628T150118 [CommandExec]:got command set sci2_noyo_optim.ApproachDepthTimeout 35 minute

20250628T150140 [CommandExec]:got command set sci2_noyo_optim.SlowSpeed 0.5 meter_per_second

20250628T150140 [CommandExec]:got command set sci2_noyo_optim.BuoyancyNeutral 280 cubic_centimeter

20250628T150140 [CommandExec]:got command set sci2_noyo_optim.MaxDepth 265 meter

20250628T150140 [CommandExec]:got command set sci2_noyo_optim:NeedComms.SurfacingTimeout 1500 second

20250628T150140 [CommandExec]:got command run

20250628T150140 [CommandExec]:Running

20250628T150140 [MissionManager]:Started mission sci2_noyo_optim

20250628T150144 [CTD_Seabird]:Salinity reading out of range: 127.012856 psu

20250628T151914 [CTD_Seabird]:Failed to parse device response: 88,4048.95#

20250628T155714 [BPC1]:BPC1A: No match for serial number 1717 in BPC1A's battery stick inventory (sticks 1-31 in onboard configuration file).

20250628T165800 [CTD_Seabird]:Failed to parse device response: .08#

20250628T180140 [CommandExec]:got command stop

20250628T180140 [CommandExec]:Scheduling is paused

20250628T180140 [MissionManager]:Started mission Default

20250628T180309 [CommandExec]:got command restart application